diff options
Diffstat (limited to 'drivers/ide/pci/cs5530.c')
-rw-r--r-- | drivers/ide/pci/cs5530.c | 160 |
1 files changed, 79 insertions, 81 deletions
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index b2d7c132ef4b..1eec1f308d16 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -1,10 +1,10 @@ /* - * linux/drivers/ide/pci/cs5530.c Version 0.7 Sept 10, 2002 + * linux/drivers/ide/pci/cs5530.c Version 0.73 Mar 10 2007 * * Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org> - * Ditto of GNU General Public License. - * * Copyright (C) 2000 Mark Lord <mlord@pobox.com> + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * * May be copied or modified under the terms of the GNU General Public License * * Development of this chipset driver was funded @@ -62,6 +62,14 @@ static unsigned int cs5530_pio_timings[2][5] = { #define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132) #define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20)) +static void cs5530_tunepio(ide_drive_t *drive, u8 pio) +{ + unsigned long basereg = CS5530_BASEREG(drive->hwif); + unsigned int format = (inl(basereg + 4) >> 31) & 1; + + outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); +} + /** * cs5530_tuneproc - select/set PIO modes * @@ -74,98 +82,78 @@ static unsigned int cs5530_pio_timings[2][5] = { static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */ { - ide_hwif_t *hwif = HWIF(drive); - unsigned int format; - unsigned long basereg = CS5530_BASEREG(hwif); - static u8 modes[5] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4}; - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); - if (!cs5530_set_xfer_mode(drive, modes[pio])) { - format = (inl(basereg + 4) >> 31) & 1; - outl(cs5530_pio_timings[format][pio], - basereg+(drive->select.b.unit<<3)); + + if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0) + cs5530_tunepio(drive, pio); +} + +/** + * cs5530_udma_filter - UDMA filter + * @drive: drive + * + * cs5530_udma_filter() does UDMA mask filtering for the given drive + * taking into the consideration capabilities of the mate device. + * + * The CS5530 specifies that two drives sharing a cable cannot mix + * UDMA/MDMA. It has to be one or the other, for the pair, though + * different timings can still be chosen for each drive. We could + * set the appropriate timing bits on the fly, but that might be + * a bit confusing. So, for now we statically handle this requirement + * by looking at our mate drive to see what it is capable of, before + * choosing a mode for our own drive. + * + * Note: This relies on the fact we never fail from UDMA to MWDMA2 + * but instead drop to PIO. + */ + +static u8 cs5530_udma_filter(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1]; + struct hd_driveid *mateid = mate->id; + u8 mask = hwif->ultra_mask; + + if (mate->present == 0) + goto out; + + if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) { + if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7)) + goto out; + if ((mateid->field_valid & 2) && (mateid->dma_mword & 7)) + mask = 0; } +out: + return mask; } /** - * cs5530_config_dma - select/set DMA and UDMA modes + * cs5530_config_dma - set DMA/UDMA mode * @drive: drive to tune * - * cs5530_config_dma() handles selection/setting of DMA/UDMA modes - * for both the chipset and drive. The CS5530 has limitations about - * mixing DMA/UDMA on the same cable. + * cs5530_config_dma() handles setting of DMA/UDMA mode + * for both the chipset and drive. */ - -static int cs5530_config_dma (ide_drive_t *drive) + +static int cs5530_config_dma(ide_drive_t *drive) { - int udma_ok = 1, mode = 0; - ide_hwif_t *hwif = HWIF(drive); - int unit = drive->select.b.unit; - ide_drive_t *mate = &hwif->drives[unit^1]; - struct hd_driveid *id = drive->id; - unsigned int reg, timings = 0; - unsigned long basereg; + if (ide_tune_dma(drive)) + return 0; - /* - * Default to DMA-off in case we run into trouble here. - */ - hwif->dma_off_quietly(drive); + return 1; +} - /* - * The CS5530 specifies that two drives sharing a cable cannot - * mix UDMA/MDMA. It has to be one or the other, for the pair, - * though different timings can still be chosen for each drive. - * We could set the appropriate timing bits on the fly, - * but that might be a bit confusing. So, for now we statically - * handle this requirement by looking at our mate drive to see - * what it is capable of, before choosing a mode for our own drive. - * - * Note: This relies on the fact we never fail from UDMA to MWDMA_2 - * but instead drop to PIO - */ - if (mate->present) { - struct hd_driveid *mateid = mate->id; - if (mateid && (mateid->capability & 1) && - !__ide_dma_bad_drive(mate)) { - if ((mateid->field_valid & 4) && - (mateid->dma_ultra & 7)) - udma_ok = 1; - else if ((mateid->field_valid & 2) && - (mateid->dma_mword & 7)) - udma_ok = 0; - else - udma_ok = 1; - } - } +static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode) +{ + unsigned long basereg; + unsigned int reg, timings = 0; - /* - * Now see what the current drive is capable of, - * selecting UDMA only if the mate said it was ok. - */ - if (id && (id->capability & 1) && drive->autodma && - !__ide_dma_bad_drive(drive)) { - if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) { - if (id->dma_ultra & 4) - mode = XFER_UDMA_2; - else if (id->dma_ultra & 2) - mode = XFER_UDMA_1; - else if (id->dma_ultra & 1) - mode = XFER_UDMA_0; - } - if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) { - if (id->dma_mword & 4) - mode = XFER_MW_DMA_2; - else if (id->dma_mword & 2) - mode = XFER_MW_DMA_1; - else if (id->dma_mword & 1) - mode = XFER_MW_DMA_0; - } - } + mode = ide_rate_filter(drive, mode); /* * Tell the drive to switch to the new mode; abort on failure. */ - if (!mode || cs5530_set_xfer_mode(drive, mode)) + if (cs5530_set_xfer_mode(drive, mode)) return 1; /* failure */ /* @@ -178,14 +166,21 @@ static int cs5530_config_dma (ide_drive_t *drive) case XFER_MW_DMA_0: timings = 0x00077771; break; case XFER_MW_DMA_1: timings = 0x00012121; break; case XFER_MW_DMA_2: timings = 0x00002020; break; + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + cs5530_tunepio(drive, mode - XFER_PIO_0); + return 0; default: BUG(); break; } - basereg = CS5530_BASEREG(hwif); + basereg = CS5530_BASEREG(drive->hwif); reg = inl(basereg + 4); /* get drive0 config register */ timings |= reg & 0x80000000; /* preserve PIO format bit */ - if (unit == 0) { /* are we configuring drive0? */ + if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ outl(timings, basereg + 4); /* write drive0 config register */ } else { if (timings & 0x00100000) @@ -311,6 +306,8 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) hwif->serialized = hwif->mate->serialized = 1; hwif->tuneproc = &cs5530_tuneproc; + hwif->speedproc = &cs5530_tune_chipset; + basereg = CS5530_BASEREG(hwif); d0_timings = inl(basereg + 0); if (CS5530_BAD_PIO(d0_timings)) { @@ -332,6 +329,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) hwif->ultra_mask = 0x07; hwif->mwdma_mask = 0x07; + hwif->udma_filter = cs5530_udma_filter; hwif->ide_dma_check = &cs5530_config_dma; if (!noautodma) hwif->autodma = 1; |