summaryrefslogtreecommitdiffstats
path: root/drivers/iio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/accel/st_accel_core.c35
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c2
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_trigger.c16
-rw-r--r--drivers/iio/gyro/st_gyro_core.c15
-rw-r--r--drivers/iio/magnetometer/st_magn_core.c10
-rw-r--r--drivers/iio/pressure/st_pressure_core.c15
6 files changed, 65 insertions, 28 deletions
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 1a2e54ff473a..140ba26f6131 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -164,7 +164,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_int2 = 0x00,
.addr_ihl = 0x25,
.mask_ihl = 0x02,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.sim = {
.addr = 0x23,
@@ -236,7 +239,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_ihl = 0x80,
.addr_od = 0x22,
.mask_od = 0x40,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.sim = {
.addr = 0x23,
@@ -318,7 +324,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_int2 = 0x00,
.addr_ihl = 0x23,
.mask_ihl = 0x40,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
.ig1 = {
.en_addr = 0x23,
.en_mask = 0x08,
@@ -389,7 +398,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.drdy_irq = {
.addr = 0x21,
.mask_int1 = 0x04,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.sim = {
.addr = 0x21,
@@ -451,7 +463,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_ihl = 0x80,
.addr_od = 0x22,
.mask_od = 0x40,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.sim = {
.addr = 0x21,
@@ -569,7 +584,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.drdy_irq = {
.addr = 0x21,
.mask_int1 = 0x04,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.sim = {
.addr = 0x21,
@@ -640,7 +658,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_int2 = 0x00,
.addr_ihl = 0x25,
.mask_ihl = 0x02,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.sim = {
.addr = 0x23,
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 02e833b14db0..34115f05d5c4 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -470,7 +470,7 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
* different one. Take into account irq status register
* to understand if irq trigger can be properly supported
*/
- if (sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+ if (sdata->sensor_settings->drdy_irq.stat_drdy.addr)
sdata->hw_irq_trigger = enable;
return 0;
}
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index fa73e6795359..fdcc5a891958 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -31,7 +31,7 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
int ret;
/* How would I know if I can't check it? */
- if (!sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+ if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr)
return -EINVAL;
/* No scan mask, no interrupt */
@@ -39,23 +39,15 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
return 0;
ret = sdata->tf->read_byte(&sdata->tb, sdata->dev,
- sdata->sensor_settings->drdy_irq.addr_stat_drdy,
+ sdata->sensor_settings->drdy_irq.stat_drdy.addr,
&status);
if (ret < 0) {
dev_err(sdata->dev,
"error checking samples available\n");
return ret;
}
- /*
- * the lower bits of .active_scan_mask[0] is directly mapped
- * to the channels on the sensor: either bit 0 for
- * one-dimensional sensors, or e.g. x,y,z for accelerometers,
- * gyroscopes or magnetometers. No sensor use more than 3
- * channels, so cut the other status bits here.
- */
- status &= 0x07;
- if (status & (u8)indio_dev->active_scan_mask[0])
+ if (status & sdata->sensor_settings->drdy_irq.stat_drdy.mask)
return 1;
return 0;
@@ -212,7 +204,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
* it was "our" interrupt.
*/
if (sdata->int_pin_open_drain &&
- sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+ sdata->sensor_settings->drdy_irq.stat_drdy.addr)
irq_trig |= IRQF_SHARED;
err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 4cf85aa01dde..22c0c1732996 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -118,7 +118,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
* drain settings, but only for INT1 and not
* for the DRDY line on INT2.
*/
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.multi_read_bit = true,
.bootime = 2,
@@ -188,7 +191,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
* drain settings, but only for INT1 and not
* for the DRDY line on INT2.
*/
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.multi_read_bit = true,
.bootime = 2,
@@ -253,7 +259,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
* drain settings, but only for INT1 and not
* for the DRDY line on INT2.
*/
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.multi_read_bit = true,
.bootime = 2,
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 703de313c418..ace72c57f53c 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -317,7 +317,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
},
.drdy_irq = {
/* drdy line is routed drdy pin */
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x07,
+ },
},
.multi_read_bit = true,
.bootime = 2,
@@ -361,7 +364,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
.drdy_irq = {
.addr = 0x62,
.mask_int1 = 0x01,
- .addr_stat_drdy = 0x67,
+ .stat_drdy = {
+ .addr = 0x67,
+ .mask = 0x07,
+ },
},
.multi_read_bit = false,
.bootime = 2,
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 86120715913b..5f8358e23f5b 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -287,7 +287,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask_ihl = 0x80,
.addr_od = 0x22,
.mask_od = 0x40,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x03,
+ },
},
.multi_read_bit = true,
.bootime = 2,
@@ -395,7 +398,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask_ihl = 0x80,
.addr_od = 0x22,
.mask_od = 0x40,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x03,
+ },
},
.multi_read_bit = true,
.bootime = 2,
@@ -456,7 +462,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask_ihl = 0x80,
.addr_od = 0x12,
.mask_od = 0x40,
- .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x03,
+ },
},
.multi_read_bit = false,
.bootime = 2,
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-19 02:33:15 +0200