summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/ttpci/budget-ci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/ttpci/budget-ci.c')
-rw-r--r--drivers/media/dvb/ttpci/budget-ci.c334
1 files changed, 197 insertions, 137 deletions
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index cd5ec489af1c..f2066b47baee 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -37,6 +37,7 @@
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/spinlock.h>
+#include <media/ir-common.h>
#include "dvb_ca_en50221.h"
#include "stv0299.h"
@@ -72,162 +73,218 @@
#define SLOTSTATUS_READY 8
#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+/* Milliseconds during which key presses are regarded as key repeat and during
+ * which the debounce logic is active
+ */
+#define IR_REPEAT_TIMEOUT 350
+
+/* RC5 device wildcard */
+#define IR_DEVICE_ANY 255
+
+/* Some remotes sends multiple sequences per keypress (e.g. Zenith sends two),
+ * this setting allows the superflous sequences to be ignored
+ */
+static int debounce = 0;
+module_param(debounce, int, 0644);
+MODULE_PARM_DESC(debounce, "ignore repeated IR sequences (default: 0 = ignore no sequences)");
+
+static int rc5_device = -1;
+module_param(rc5_device, int, 0644);
+MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
+
+static int ir_debug = 0;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
+
+struct budget_ci_ir {
+ struct input_dev *dev;
+ struct tasklet_struct msp430_irq_tasklet;
+ char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
+ char phys[32];
+ struct ir_input_state state;
+ int rc5_device;
+};
+
struct budget_ci {
struct budget budget;
- struct input_dev *input_dev;
- struct tasklet_struct msp430_irq_tasklet;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
int ci_irq;
struct dvb_ca_en50221 ca;
- char ir_dev_name[50];
+ struct budget_ci_ir ir;
u8 tuner_pll_address; /* used for philips_tdm1316l configs */
};
-/* from reading the following remotes:
- Zenith Universal 7 / TV Mode 807 / VCR Mode 837
- Hauppauge (from NOVA-CI-s box product)
- i've taken a "middle of the road" approach and note the differences
-*/
-static u16 key_map[64] = {
- /* 0x0X */
- KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8,
- KEY_9,
- KEY_ENTER,
- KEY_RED,
- KEY_POWER, /* RADIO on Hauppauge */
- KEY_MUTE,
- 0,
- KEY_A, /* TV on Hauppauge */
- /* 0x1X */
- KEY_VOLUMEUP, KEY_VOLUMEDOWN,
- 0, 0,
- KEY_B,
- 0, 0, 0, 0, 0, 0, 0,
- KEY_UP, KEY_DOWN,
- KEY_OPTION, /* RESERVED on Hauppauge */
- KEY_BREAK,
- /* 0x2X */
- KEY_CHANNELUP, KEY_CHANNELDOWN,
- KEY_PREVIOUS, /* Prev. Ch on Zenith, SOURCE on Hauppauge */
- 0, KEY_RESTART, KEY_OK,
- KEY_CYCLEWINDOWS, /* MINIMIZE on Hauppauge */
- 0,
- KEY_ENTER, /* VCR mode on Zenith */
- KEY_PAUSE,
- 0,
- KEY_RIGHT, KEY_LEFT,
- 0,
- KEY_MENU, /* FULL SCREEN on Hauppauge */
- 0,
- /* 0x3X */
- KEY_SLOW,
- KEY_PREVIOUS, /* VCR mode on Zenith */
- KEY_REWIND,
- 0,
- KEY_FASTFORWARD,
- KEY_PLAY, KEY_STOP,
- KEY_RECORD,
- KEY_TUNER, /* TV/VCR on Zenith */
- 0,
- KEY_C,
- 0,
- KEY_EXIT,
- KEY_POWER2,
- KEY_TUNER, /* VCR mode on Zenith */
- 0,
-};
-
-static void msp430_ir_debounce(unsigned long data)
+static void msp430_ir_keyup(unsigned long data)
{
- struct input_dev *dev = (struct input_dev *) data;
-
- if (dev->rep[0] == 0 || dev->rep[0] == ~0) {
- input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
- return;
- }
-
- dev->rep[0] = 0;
- dev->timer.expires = jiffies + HZ * 350 / 1000;
- add_timer(&dev->timer);
- input_event(dev, EV_KEY, key_map[dev->repeat_key], 2); /* REPEAT */
+ struct budget_ci_ir *ir = (struct budget_ci_ir *) data;
+ ir_input_nokey(ir->dev, &ir->state);
}
static void msp430_ir_interrupt(unsigned long data)
{
struct budget_ci *budget_ci = (struct budget_ci *) data;
- struct input_dev *dev = budget_ci->input_dev;
- unsigned int code =
- ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
+ struct input_dev *dev = budget_ci->ir.dev;
+ static int bounces = 0;
+ int device;
+ int toggle;
+ static int prev_toggle = -1;
+ static u32 ir_key;
+ u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
+
+ /*
+ * The msp430 chip can generate two different bytes, command and device
+ *
+ * type1: X1CCCCCC, C = command bits (0 - 63)
+ * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
+ *
+ * More than one command byte may be generated before the device byte
+ * Only when we have both, a correct keypress is generated
+ */
+
+ /* Is this a RC5 command byte? */
+ if (command & 0x40) {
+ if (ir_debug)
+ printk("budget_ci: received command byte 0x%02x\n", command);
+ ir_key = command & 0x3f;
+ return;
+ }
- if (code & 0x40) {
- code &= 0x3f;
+ /* It's a RC5 device byte */
+ if (ir_debug)
+ printk("budget_ci: received device byte 0x%02x\n", command);
+ device = command & 0x1f;
+ toggle = command & 0x20;
- if (timer_pending(&dev->timer)) {
- if (code == dev->repeat_key) {
- ++dev->rep[0];
- return;
- }
- del_timer(&dev->timer);
- input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
- }
+ if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && budget_ci->ir.rc5_device != device)
+ return;
- if (!key_map[code]) {
- printk("DVB (%s): no key for %02x!\n", __FUNCTION__, code);
- return;
- }
+ /* Ignore repeated key sequences if requested */
+ if (toggle == prev_toggle && ir_key == dev->repeat_key &&
+ bounces > 0 && timer_pending(&dev->timer)) {
+ if (ir_debug)
+ printk("budget_ci: debounce logic ignored IR command\n");
+ bounces--;
+ return;
+ }
+ prev_toggle = toggle;
- /* initialize debounce and repeat */
- dev->repeat_key = code;
- /* Zenith remote _always_ sends 2 sequences */
- dev->rep[0] = ~0;
- /* 350 milliseconds */
- dev->timer.expires = jiffies + HZ * 350 / 1000;
- /* MAKE */
- input_event(dev, EV_KEY, key_map[code], !0);
- add_timer(&dev->timer);
+ /* Are we still waiting for a keyup event? */
+ if (del_timer(&dev->timer))
+ ir_input_nokey(dev, &budget_ci->ir.state);
+
+ /* Generate keypress */
+ if (ir_debug)
+ printk("budget_ci: generating keypress 0x%02x\n", ir_key);
+ ir_input_keydown(dev, &budget_ci->ir.state, ir_key, (ir_key & (command << 8)));
+
+ /* Do we want to delay the keyup event? */
+ if (debounce) {
+ bounces = debounce;
+ mod_timer(&dev->timer, jiffies + msecs_to_jiffies(IR_REPEAT_TIMEOUT));
+ } else {
+ ir_input_nokey(dev, &budget_ci->ir.state);
}
}
static int msp430_ir_init(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
- struct input_dev *input_dev;
- int i;
+ struct input_dev *input_dev = budget_ci->ir.dev;
+ int error;
+
+ budget_ci->ir.dev = input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
+ error = -ENOMEM;
+ goto out1;
+ }
+
+ snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name),
+ "Budget-CI dvb ir receiver %s", saa->name);
+ snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
+ "pci-%s/ir0", pci_name(saa->pci));
- budget_ci->input_dev = input_dev = input_allocate_device();
- if (!input_dev)
- return -ENOMEM;
+ input_dev->name = budget_ci->ir.name;
- sprintf(budget_ci->ir_dev_name, "Budget-CI dvb ir receiver %s", saa->name);
+ input_dev->phys = budget_ci->ir.phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
+ if (saa->pci->subsystem_vendor) {
+ input_dev->id.vendor = saa->pci->subsystem_vendor;
+ input_dev->id.product = saa->pci->subsystem_device;
+ } else {
+ input_dev->id.vendor = saa->pci->vendor;
+ input_dev->id.product = saa->pci->device;
+ }
+ input_dev->cdev.dev = &saa->pci->dev;
- input_dev->name = budget_ci->ir_dev_name;
+ /* Select keymap and address */
+ switch (budget_ci->budget.dev->pci->subsystem_device) {
+ case 0x100c:
+ case 0x100f:
+ case 0x1010:
+ case 0x1011:
+ case 0x1012:
+ case 0x1017:
+ /* The hauppauge keymap is a superset of these remotes */
+ ir_input_init(input_dev, &budget_ci->ir.state,
+ IR_TYPE_RC5, ir_codes_hauppauge_new);
+
+ if (rc5_device < 0)
+ budget_ci->ir.rc5_device = 0x1f;
+ else
+ budget_ci->ir.rc5_device = rc5_device;
+ break;
+ default:
+ /* unknown remote */
+ ir_input_init(input_dev, &budget_ci->ir.state,
+ IR_TYPE_RC5, ir_codes_budget_ci_old);
+
+ if (rc5_device < 0)
+ budget_ci->ir.rc5_device = IR_DEVICE_ANY;
+ else
+ budget_ci->ir.rc5_device = rc5_device;
+ break;
+ }
- set_bit(EV_KEY, input_dev->evbit);
- for (i = 0; i < ARRAY_SIZE(key_map); i++)
- if (key_map[i])
- set_bit(key_map[i], input_dev->keybit);
+ /* initialise the key-up debounce timeout handler */
+ input_dev->timer.function = msp430_ir_keyup;
+ input_dev->timer.data = (unsigned long) &budget_ci->ir;
- input_register_device(budget_ci->input_dev);
+ error = input_register_device(input_dev);
+ if (error) {
+ printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+ goto out2;
+ }
- input_dev->timer.function = msp430_ir_debounce;
+ tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
+ (unsigned long) budget_ci);
- saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_06);
+ SAA7146_IER_ENABLE(saa, MASK_06);
saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
return 0;
+
+out2:
+ input_free_device(input_dev);
+out1:
+ return error;
}
static void msp430_ir_deinit(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
- struct input_dev *dev = budget_ci->input_dev;
+ struct input_dev *dev = budget_ci->ir.dev;
- saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_06);
+ SAA7146_IER_DISABLE(saa, MASK_06);
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+ tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
- if (del_timer(&dev->timer))
- input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
+ if (del_timer(&dev->timer)) {
+ ir_input_nokey(dev, &budget_ci->ir.state);
+ input_sync(dev);
+ }
input_unregister_device(dev);
}
@@ -428,7 +485,7 @@ static int ciintf_init(struct budget_ci *budget_ci)
memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
// enable DEBI pins
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
// test if it is there
ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
@@ -480,7 +537,7 @@ static int ciintf_init(struct budget_ci *budget_ci)
} else {
saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
}
- saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+ SAA7146_IER_ENABLE(saa, MASK_03);
}
// enable interface
@@ -502,7 +559,7 @@ static int ciintf_init(struct budget_ci *budget_ci)
return 0;
error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
return result;
}
@@ -512,7 +569,7 @@ static void ciintf_deinit(struct budget_ci *budget_ci)
// disable CI interrupts
if (budget_ci->ci_irq) {
- saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+ SAA7146_IER_DISABLE(saa, MASK_03);
saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
tasklet_kill(&budget_ci->ciintf_irq_tasklet);
}
@@ -530,7 +587,7 @@ static void ciintf_deinit(struct budget_ci *budget_ci)
dvb_ca_en50221_release(&budget_ci->ca);
// disable DEBI pins
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
}
static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
@@ -540,7 +597,7 @@ static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci);
if (*isr & MASK_06)
- tasklet_schedule(&budget_ci->msp430_irq_tasklet);
+ tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet);
if (*isr & MASK_10)
ttpci_budget_irq10_handler(dev, isr);
@@ -835,7 +892,7 @@ static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe, struc
band = 1;
} else if (tuner_frequency < 200000000) {
cp = 6;
- band = 1;
+ band = 2;
} else if (tuner_frequency < 290000000) {
cp = 3;
band = 2;
@@ -1083,24 +1140,23 @@ static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
struct budget_ci *budget_ci;
int err;
- if (!(budget_ci = kmalloc(sizeof(struct budget_ci), GFP_KERNEL)))
- return -ENOMEM;
+ budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL);
+ if (!budget_ci) {
+ err = -ENOMEM;
+ goto out1;
+ }
dprintk(2, "budget_ci: %p\n", budget_ci);
- budget_ci->budget.ci_present = 0;
-
dev->ext_priv = budget_ci;
- if ((err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE))) {
- kfree(budget_ci);
- return err;
- }
-
- tasklet_init(&budget_ci->msp430_irq_tasklet, msp430_ir_interrupt,
- (unsigned long) budget_ci);
+ err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE);
+ if (err)
+ goto out2;
- msp430_ir_init(budget_ci);
+ err = msp430_ir_init(budget_ci);
+ if (err)
+ goto out3;
ciintf_init(budget_ci);
@@ -1110,6 +1166,13 @@ static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
ttpci_budget_init_hooks(&budget_ci->budget);
return 0;
+
+out3:
+ ttpci_budget_deinit(&budget_ci->budget);
+out2:
+ kfree(budget_ci);
+out1:
+ return err;
}
static int budget_ci_detach(struct saa7146_dev *dev)
@@ -1120,16 +1183,13 @@ static int budget_ci_detach(struct saa7146_dev *dev)
if (budget_ci->budget.ci_present)
ciintf_deinit(budget_ci);
+ msp430_ir_deinit(budget_ci);
if (budget_ci->budget.dvb_frontend) {
dvb_unregister_frontend(budget_ci->budget.dvb_frontend);
dvb_frontend_detach(budget_ci->budget.dvb_frontend);
}
err = ttpci_budget_deinit(&budget_ci->budget);
- tasklet_kill(&budget_ci->msp430_irq_tasklet);
-
- msp430_ir_deinit(budget_ci);
-
// disable frontend and CI interface
saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
@@ -1162,7 +1222,7 @@ MODULE_DEVICE_TABLE(pci, pci_tbl);
static struct saa7146_extension budget_extension = {
.name = "budget_ci dvb",
- .flags = SAA7146_I2C_SHORT_DELAY,
+ .flags = SAA7146_USE_I2C_IRQ,
.module = THIS_MODULE,
.pci_tbl = &pci_tbl[0],