summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/sn9c102/sn9c102_sensor.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/sn9c102/sn9c102_sensor.h')
-rw-r--r--drivers/media/usb/sn9c102/sn9c102_sensor.h307
1 files changed, 307 insertions, 0 deletions
diff --git a/drivers/media/usb/sn9c102/sn9c102_sensor.h b/drivers/media/usb/sn9c102/sn9c102_sensor.h
new file mode 100644
index 000000000000..3679970dba2c
--- /dev/null
+++ b/drivers/media/usb/sn9c102/sn9c102_sensor.h
@@ -0,0 +1,307 @@
+/***************************************************************************
+ * API for image sensors connected to the SN9C1xx PC Camera Controllers *
+ * *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#ifndef _SN9C102_SENSOR_H_
+#define _SN9C102_SENSOR_H_
+
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <asm/types.h>
+
+struct sn9c102_device;
+struct sn9c102_sensor;
+
+/*****************************************************************************/
+
+/*
+ OVERVIEW.
+ This is a small interface that allows you to add support for any CCD/CMOS
+ image sensors connected to the SN9C1XX bridges. The entire API is documented
+ below. In the most general case, to support a sensor there are three steps
+ you have to follow:
+ 1) define the main "sn9c102_sensor" structure by setting the basic fields;
+ 2) write a probing function to be called by the core module when the USB
+ camera is recognized, then add both the USB ids and the name of that
+ function to the two corresponding tables in sn9c102_devtable.h;
+ 3) implement the methods that you want/need (and fill the rest of the main
+ structure accordingly).
+ "sn9c102_pas106b.c" is an example of all this stuff. Remember that you do
+ NOT need to touch the source code of the core module for the things to work
+ properly, unless you find bugs or flaws in it. Finally, do not forget to
+ read the V4L2 API for completeness.
+*/
+
+/*****************************************************************************/
+
+enum sn9c102_bridge {
+ BRIDGE_SN9C101 = 0x01,
+ BRIDGE_SN9C102 = 0x02,
+ BRIDGE_SN9C103 = 0x04,
+ BRIDGE_SN9C105 = 0x08,
+ BRIDGE_SN9C120 = 0x10,
+};
+
+/* Return the bridge name */
+enum sn9c102_bridge sn9c102_get_bridge(struct sn9c102_device* cam);
+
+/* Return a pointer the sensor struct attached to the camera */
+struct sn9c102_sensor* sn9c102_get_sensor(struct sn9c102_device* cam);
+
+/* Identify a device */
+extern struct sn9c102_device*
+sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id);
+
+/* Attach a probed sensor to the camera. */
+extern void
+sn9c102_attach_sensor(struct sn9c102_device* cam,
+ const struct sn9c102_sensor* sensor);
+
+/*
+ Read/write routines: they always return -1 on error, 0 or the read value
+ otherwise. NOTE that a real read operation is not supported by the SN9C1XX
+ chip for some of its registers. To work around this problem, a pseudo-read
+ call is provided instead: it returns the last successfully written value
+ on the register (0 if it has never been written), the usual -1 on error.
+*/
+
+/* The "try" I2C I/O versions are used when probing the sensor */
+extern int sn9c102_i2c_try_read(struct sn9c102_device*,
+ const struct sn9c102_sensor*, u8 address);
+
+/*
+ These must be used if and only if the sensor doesn't implement the standard
+ I2C protocol. There are a number of good reasons why you must use the
+ single-byte versions of these functions: do not abuse. The first function
+ writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C1XX
+ chip. The second one programs the registers 0x09 and 0x10 with data0 and
+ data1, and places the n bytes read from the sensor register table in the
+ buffer pointed by 'buffer'. Both the functions return -1 on error; the write
+ version returns 0 on success, while the read version returns the first read
+ byte.
+*/
+extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
+ const struct sn9c102_sensor* sensor, u8 n,
+ u8 data0, u8 data1, u8 data2, u8 data3,
+ u8 data4, u8 data5);
+extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam,
+ const struct sn9c102_sensor* sensor,
+ u8 data0, u8 data1, u8 n, u8 buffer[]);
+
+/* To be used after the sensor struct has been attached to the camera struct */
+extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value);
+extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address);
+
+/* I/O on registers in the bridge. Could be used by the sensor methods too */
+extern int sn9c102_read_reg(struct sn9c102_device*, u16 index);
+extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index);
+extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index);
+extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2],
+ int count);
+/*
+ Write multiple registers with constant values. For example:
+ sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18});
+ Register addresses must be < 256.
+*/
+#define sn9c102_write_const_regs(sn9c102_device, data...) \
+ ({ static const u8 _valreg[][2] = {data}; \
+ sn9c102_write_regs(sn9c102_device, _valreg, ARRAY_SIZE(_valreg)); })
+
+/*****************************************************************************/
+
+enum sn9c102_i2c_sysfs_ops {
+ SN9C102_I2C_READ = 0x01,
+ SN9C102_I2C_WRITE = 0x02,
+};
+
+enum sn9c102_i2c_frequency { /* sensors may support both the frequencies */
+ SN9C102_I2C_100KHZ = 0x01,
+ SN9C102_I2C_400KHZ = 0x02,
+};
+
+enum sn9c102_i2c_interface {
+ SN9C102_I2C_2WIRES,
+ SN9C102_I2C_3WIRES,
+};
+
+#define SN9C102_MAX_CTRLS (V4L2_CID_LASTP1-V4L2_CID_BASE+10)
+
+struct sn9c102_sensor {
+ char name[32], /* sensor name */
+ maintainer[64]; /* name of the maintainer <email> */
+
+ enum sn9c102_bridge supported_bridge; /* supported SN9C1xx bridges */
+
+ /* Supported operations through the 'sysfs' interface */
+ enum sn9c102_i2c_sysfs_ops sysfs_ops;
+
+ /*
+ These sensor capabilities must be provided if the SN9C1XX controller
+ needs to communicate through the sensor serial interface by using
+ at least one of the i2c functions available.
+ */
+ enum sn9c102_i2c_frequency frequency;
+ enum sn9c102_i2c_interface interface;
+
+ /*
+ This identifier must be provided if the image sensor implements
+ the standard I2C protocol.
+ */
+ u8 i2c_slave_id; /* reg. 0x09 */
+
+ /*
+ NOTE: Where not noted,most of the functions below are not mandatory.
+ Set to null if you do not implement them. If implemented,
+ they must return 0 on success, the proper error otherwise.
+ */
+
+ int (*init)(struct sn9c102_device* cam);
+ /*
+ This function will be called after the sensor has been attached.
+ It should be used to initialize the sensor only, but may also
+ configure part of the SN9C1XX chip if necessary. You don't need to
+ setup picture settings like brightness, contrast, etc.. here, if
+ the corresponding controls are implemented (see below), since
+ they are adjusted in the core driver by calling the set_ctrl()
+ method after init(), where the arguments are the default values
+ specified in the v4l2_queryctrl list of supported controls;
+ Same suggestions apply for other settings, _if_ the corresponding
+ methods are present; if not, the initialization must configure the
+ sensor according to the default configuration structures below.
+ */
+
+ struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS];
+ /*
+ Optional list of default controls, defined as indicated in the
+ V4L2 API. Menu type controls are not handled by this interface.
+ */
+
+ int (*get_ctrl)(struct sn9c102_device* cam, struct v4l2_control* ctrl);
+ int (*set_ctrl)(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl);
+ /*
+ You must implement at least the set_ctrl method if you have defined
+ the list above. The returned value must follow the V4L2
+ specifications for the VIDIOC_G|C_CTRL ioctls. V4L2_CID_H|VCENTER
+ are not supported by this driver, so do not implement them. Also,
+ you don't have to check whether the passed values are out of bounds,
+ given that this is done by the core module.
+ */
+
+ struct v4l2_cropcap cropcap;
+ /*
+ Think the image sensor as a grid of R,G,B monochromatic pixels
+ disposed according to a particular Bayer pattern, which describes
+ the complete array of pixels, from (0,0) to (xmax, ymax). We will
+ use this coordinate system from now on. It is assumed the sensor
+ chip can be programmed to capture/transmit a subsection of that
+ array of pixels: we will call this subsection "active window".
+ It is not always true that the largest achievable active window can
+ cover the whole array of pixels. The V4L2 API defines another
+ area called "source rectangle", which, in turn, is a subrectangle of
+ the active window. The SN9C1XX chip is always programmed to read the
+ source rectangle.
+ The bounds of both the active window and the source rectangle are
+ specified in the cropcap substructures 'bounds' and 'defrect'.
+ By default, the source rectangle should cover the largest possible
+ area. Again, it is not always true that the largest source rectangle
+ can cover the entire active window, although it is a rare case for
+ the hardware we have. The bounds of the source rectangle _must_ be
+ multiple of 16 and must use the same coordinate system as indicated
+ before; their centers shall align initially.
+ If necessary, the sensor chip must be initialized during init() to
+ set the bounds of the active sensor window; however, by default, it
+ usually covers the largest achievable area (maxwidth x maxheight)
+ of pixels, so no particular initialization is needed, if you have
+ defined the correct default bounds in the structures.
+ See the V4L2 API for further details.
+ NOTE: once you have defined the bounds of the active window
+ (struct cropcap.bounds) you must not change them.anymore.
+ Only 'bounds' and 'defrect' fields are mandatory, other fields
+ will be ignored.
+ */
+
+ int (*set_crop)(struct sn9c102_device* cam,
+ const struct v4l2_rect* rect);
+ /*
+ To be called on VIDIOC_C_SETCROP. The core module always calls a
+ default routine which configures the appropriate SN9C1XX regs (also
+ scaling), but you may need to override/adjust specific stuff.
+ 'rect' contains width and height values that are multiple of 16: in
+ case you override the default function, you always have to program
+ the chip to match those values; on error return the corresponding
+ error code without rolling back.
+ NOTE: in case, you must program the SN9C1XX chip to get rid of
+ blank pixels or blank lines at the _start_ of each line or
+ frame after each HSYNC or VSYNC, so that the image starts with
+ real RGB data (see regs 0x12, 0x13) (having set H_SIZE and,
+ V_SIZE you don't have to care about blank pixels or blank
+ lines at the end of each line or frame).
+ */
+
+ struct v4l2_pix_format pix_format;
+ /*
+ What you have to define here are: 1) initial 'width' and 'height' of
+ the target rectangle 2) the initial 'pixelformat', which can be
+ either V4L2_PIX_FMT_SN9C10X, V4L2_PIX_FMT_JPEG (for ompressed video)
+ or V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate
+ the number of bits per pixel for uncompressed video, 8 or 9 (despite
+ the current value of 'pixelformat').
+ NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4
+ of cropcap.defrect.width and cropcap.defrect.height. I
+ suggest 1/1.
+ NOTE 2: The initial compression quality is defined by the first bit
+ of reg 0x17 during the initialization of the image sensor.
+ NOTE 3: as said above, you have to program the SN9C1XX chip to get
+ rid of any blank pixels, so that the output of the sensor
+ matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR).
+ */
+
+ int (*set_pix_format)(struct sn9c102_device* cam,
+ const struct v4l2_pix_format* pix);
+ /*
+ To be called on VIDIOC_S_FMT, when switching from the SBGGR8 to
+ SN9C10X pixel format or viceversa. On error return the corresponding
+ error code without rolling back.
+ */
+
+ /*
+ Do NOT write to the data below, it's READ ONLY. It is used by the
+ core module to store successfully updated values of the above
+ settings, for rollbacks..etc..in case of errors during atomic I/O
+ */
+ struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS];
+ struct v4l2_rect _rect;
+};
+
+/*****************************************************************************/
+
+/* Private ioctl's for control settings supported by some image sensors */
+#define SN9C102_V4L2_CID_DAC_MAGNITUDE (V4L2_CID_PRIVATE_BASE + 0)
+#define SN9C102_V4L2_CID_GREEN_BALANCE (V4L2_CID_PRIVATE_BASE + 1)
+#define SN9C102_V4L2_CID_RESET_LEVEL (V4L2_CID_PRIVATE_BASE + 2)
+#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE (V4L2_CID_PRIVATE_BASE + 3)
+#define SN9C102_V4L2_CID_GAMMA (V4L2_CID_PRIVATE_BASE + 4)
+#define SN9C102_V4L2_CID_BAND_FILTER (V4L2_CID_PRIVATE_BASE + 5)
+#define SN9C102_V4L2_CID_BRIGHT_LEVEL (V4L2_CID_PRIVATE_BASE + 6)
+
+#endif /* _SN9C102_SENSOR_H_ */