summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/cx23885
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/cx23885')
-rw-r--r--drivers/media/video/cx23885/cimax2.c13
-rw-r--r--drivers/media/video/cx23885/cx23885-417.c57
-rw-r--r--drivers/media/video/cx23885/cx23885-cards.c91
-rw-r--r--drivers/media/video/cx23885/cx23885-core.c31
-rw-r--r--drivers/media/video/cx23885/cx23885-dvb.c59
-rw-r--r--drivers/media/video/cx23885/cx23885-i2c.c1
-rw-r--r--drivers/media/video/cx23885/cx23885-video.c6
-rw-r--r--drivers/media/video/cx23885/cx23885.h16
-rw-r--r--drivers/media/video/cx23885/netup-eeprom.c6
9 files changed, 230 insertions, 50 deletions
diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c
index 08582e58bdbf..c04222ffb286 100644
--- a/drivers/media/video/cx23885/cimax2.c
+++ b/drivers/media/video/cx23885/cimax2.c
@@ -75,7 +75,6 @@ struct netup_ci_state {
void *priv;
};
-struct mutex gpio_mutex;/* Two CiMax's uses same GPIO lines */
int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
u8 *buf, int len)
@@ -183,10 +182,11 @@ int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
if (ret != 0)
return ret;
- mutex_lock(&gpio_mutex);
+ mutex_lock(&dev->gpio_lock);
/* write addr */
cx_write(MC417_OEN, NETUP_EN_ALL);
+ msleep(2);
cx_write(MC417_RWD, NETUP_CTRL_OFF |
NETUP_ADLO | (0xff & addr));
cx_clear(MC417_RWD, NETUP_ADLO);
@@ -194,9 +194,10 @@ int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
NETUP_ADHI | (0xff & (addr >> 8)));
cx_clear(MC417_RWD, NETUP_ADHI);
- if (read) /* data in */
+ if (read) { /* data in */
cx_write(MC417_OEN, NETUP_EN_ALL | NETUP_DATA);
- else /* data out */
+ msleep(2);
+ } else /* data out */
cx_write(MC417_RWD, NETUP_CTRL_OFF | data);
/* choose chip */
@@ -206,7 +207,7 @@ int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
cx_clear(MC417_RWD, (read) ? NETUP_RD : NETUP_WR);
mem = netup_ci_get_mem(dev);
- mutex_unlock(&gpio_mutex);
+ mutex_unlock(&dev->gpio_lock);
if (!read)
if (mem < 0)
@@ -403,7 +404,6 @@ int netup_ci_init(struct cx23885_tsport *port)
switch (port->nr) {
case 1:
state->ci_i2c_addr = 0x40;
- mutex_init(&gpio_mutex);
break;
case 2:
state->ci_i2c_addr = 0x41;
@@ -443,6 +443,7 @@ int netup_ci_init(struct cx23885_tsport *port)
goto err;
INIT_WORK(&state->work, netup_read_ci_status);
+ schedule_work(&state->work);
ci_dbg_print("%s: CI initialized!\n", __func__);
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 1a1048b18f70..6c3b51ce3372 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -630,6 +630,39 @@ int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value)
return retval;
}
+void mc417_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+ u32 val;
+
+ /* Set the gpio value */
+ mc417_register_read(dev, 0x900C, &val);
+ val |= (mask & 0x000ffff);
+ mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+ u32 val;
+
+ /* Clear the gpio value */
+ mc417_register_read(dev, 0x900C, &val);
+ val &= ~(mask & 0x0000ffff);
+ mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+ u32 val;
+
+ /* Enable GPIO direction bits */
+ mc417_register_read(dev, 0x9020, &val);
+ if (asoutput)
+ val |= (mask & 0x0000ffff);
+ else
+ val &= ~(mask & 0x0000ffff);
+
+ mc417_register_write(dev, 0x9020, val);
+}
/* ------------------------------------------------------------------ */
/* MPEG encoder API */
@@ -955,25 +988,8 @@ static int cx23885_load_firmware(struct cx23885_dev *dev)
retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
IVTV_CMD_HW_BLOCKS_RST);
- /* Restore GPIO settings, make sure EIO14 is enabled as an output. */
- dprintk(2, "%s: GPIO output EIO 0-15 was = 0x%x\n",
- __func__, gpio_output);
- /* Power-up seems to have GPIOs AFU. This was causing digital side
- * to fail at power-up. Seems GPIOs should be set to 0x10ff0411 at
- * power-up.
- * gpio_output |= (1<<14);
- */
- /* Note: GPIO14 is specific to the HVR1800 here */
- gpio_output = 0x10ff0411 | (1<<14);
- retval |= mc417_register_write(dev, 0x9020, gpio_output | (1<<14));
- dprintk(2, "%s: GPIO output EIO 0-15 now = 0x%x\n",
- __func__, gpio_output);
-
- dprintk(1, "%s: GPIO value EIO 0-15 was = 0x%x\n",
- __func__, value);
- value |= (1<<14);
- dprintk(1, "%s: GPIO value EIO 0-15 now = 0x%x\n",
- __func__, value);
+ /* F/W power up disturbs the GPIOs, restore state */
+ retval |= mc417_register_write(dev, 0x9020, gpio_output);
retval |= mc417_register_write(dev, 0x900C, value);
retval |= mc417_register_read(dev, IVTV_REG_VPU, &value);
@@ -1788,9 +1804,6 @@ int cx23885_417_register(struct cx23885_dev *dev)
return err;
}
- /* Initialize MC417 registers */
- cx23885_mc417_init(dev);
-
printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
dev->name, dev->v4l_device->num);
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index ce29b5e34a11..bfdf79f1033c 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -201,6 +201,19 @@ struct cx23885_board cx23885_boards[] = {
.name = "Mygica X8506 DMB-TH",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_MAGICPRO_PROHDTVE2] = {
+ .name = "Magic-Pro ProHDTV Extreme 2",
+ .portb = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1850] = {
+ .name = "Hauppauge WinTV-HVR1850",
+ .portb = CX23885_MPEG_ENCODER,
+ .portc = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_COMPRO_VIDEOMATE_E800] = {
+ .name = "Compro VideoMate E800",
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -324,6 +337,18 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x14f1,
.subdevice = 0x8651,
.card = CX23885_BOARD_MYGICA_X8506,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0x8657,
+ .card = CX23885_BOARD_MAGICPRO_PROHDTVE2,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x8541,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1850,
+ }, {
+ .subvendor = 0x1858,
+ .subdevice = 0xe800,
+ .card = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -483,8 +508,13 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
* DVB-T and MPEG2 HW Encoder */
break;
+ case 85021:
+ /* WinTV-HVR1850 (PCIe, OEM, RCA in, IR, FM,
+ Dual channel ATSC and MPEG2 HW Encoder */
+ break;
default:
- printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
+ printk(KERN_WARNING "%s: warning: "
+ "unknown hauppauge model #%d\n",
dev->name, tv.model);
break;
}
@@ -514,6 +544,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+ case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
/* Tuner Reset Command */
bitmask = 0x04;
break;
@@ -574,13 +605,23 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
/* CX23417 GPIO's */
/* EIO15 Zilog Reset */
/* EIO14 S5H1409/CX24227 Reset */
+ mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1);
+
+ /* Put the demod into reset and protect the eeprom */
+ mc417_gpio_clear(dev, GPIO_15 | GPIO_14);
+ mdelay(100);
+
+ /* Bring the demod and blaster out of reset */
+ mc417_gpio_set(dev, GPIO_15 | GPIO_14);
+ mdelay(100);
/* Force the TDA8295A into reset and back */
- cx_set(GP0_IO, 0x00040004);
+ cx23885_gpio_enable(dev, GPIO_2, 1);
+ cx23885_gpio_set(dev, GPIO_2);
mdelay(20);
- cx_clear(GP0_IO, 0x00000004);
+ cx23885_gpio_clear(dev, GPIO_2);
mdelay(20);
- cx_set(GP0_IO, 0x00040004);
+ cx23885_gpio_set(dev, GPIO_2);
mdelay(20);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1200:
@@ -655,6 +696,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
break;
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+ case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
/* GPIO-2 xc3028 tuner reset */
/* The following GPIO's are on the internal AVCore (cx25840) */
@@ -715,14 +757,45 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
cx23885_gpio_set(dev, GPIO_9);
break;
case CX23885_BOARD_MYGICA_X8506:
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
/* GPIO-1 reset XC5000 */
- /* GPIO-2 reset LGS8GL5 */
+ /* GPIO-2 reset LGS8GL5 / LGS8G75 */
cx_set(GP0_IO, 0x00060000);
cx_clear(GP0_IO, 0x00000006);
mdelay(100);
cx_set(GP0_IO, 0x00060006);
mdelay(100);
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ /* GPIO-0 656_CLK */
+ /* GPIO-1 656_D0 */
+ /* GPIO-2 Wake# */
+ /* GPIO-3-10 cx23417 data0-7 */
+ /* GPIO-11-14 cx23417 addr0-3 */
+ /* GPIO-15-18 cx23417 READY, CS, RD, WR */
+ /* GPIO-19 IR_RX */
+ /* GPIO-20 C_IR_TX */
+ /* GPIO-21 I2S DAT */
+ /* GPIO-22 I2S WCLK */
+ /* GPIO-23 I2S BCLK */
+ /* ALT GPIO: EXP GPIO LATCH */
+
+ /* CX23417 GPIO's */
+ /* GPIO-14 S5H1411/CX24228 Reset */
+ /* GPIO-13 EEPROM write protect */
+ mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1);
+
+ /* Put the demod into reset and protect the eeprom */
+ mc417_gpio_clear(dev, GPIO_14 | GPIO_13);
+ mdelay(100);
+
+ /* Bring the demod out of reset */
+ mc417_gpio_set(dev, GPIO_14);
+ mdelay(100);
+
+ /* CX24228 GPIO */
+ /* Connected to IF / Mux */
+ break;
}
}
@@ -739,6 +812,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
/* FIXME: Implement me */
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
@@ -778,6 +852,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
@@ -827,6 +902,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_MYGICA_X8506:
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
@@ -844,6 +920,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -860,9 +938,10 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
- "cx25840", "cx25840", 0x88 >> 1);
+ "cx25840", "cx25840", 0x88 >> 1, NULL);
v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
break;
}
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index bf7bb1c412fb..c31284ba19dd 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -713,12 +713,26 @@ static void cx23885_dev_checkrevision(struct cx23885_dev *dev)
dev->hwrevision = 0xa1;
break;
case 0x02:
- /* CX23885-13Z */
+ /* CX23885-13Z/14Z */
dev->hwrevision = 0xb0;
break;
case 0x03:
- /* CX23888-22Z */
- dev->hwrevision = 0xc0;
+ if (dev->pci->device == 0x8880) {
+ /* CX23888-21Z/22Z */
+ dev->hwrevision = 0xc0;
+ } else {
+ /* CX23885-14Z */
+ dev->hwrevision = 0xa4;
+ }
+ break;
+ case 0x04:
+ if (dev->pci->device == 0x8880) {
+ /* CX23888-31Z */
+ dev->hwrevision = 0xd0;
+ } else {
+ /* CX23885-15Z, CX23888-31Z */
+ dev->hwrevision = 0xa5;
+ }
break;
case 0x0e:
/* CX23887-15Z */
@@ -744,6 +758,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
int i;
mutex_init(&dev->lock);
+ mutex_init(&dev->gpio_lock);
atomic_inc(&dev->refcount);
@@ -756,6 +771,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
/* Configure the internal memory */
if (dev->pci->device == 0x8880) {
+ /* Could be 887 or 888, assume a default */
dev->bridge = CX23885_BRIDGE_887;
/* Apply a sensible clock frequency for the PCIe bridge */
dev->clk_freq = 25000000;
@@ -868,6 +884,14 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n",
__func__, dev->radio_type, dev->radio_addr);
+ /* The cx23417 encoder has GPIO's that need to be initialised
+ * before DVB, so that demodulators and tuners are out of
+ * reset before DVB uses them.
+ */
+ if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) ||
+ (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER))
+ cx23885_mc417_init(dev);
+
/* init hardware */
cx23885_reset(dev);
@@ -1250,6 +1274,7 @@ static int cx23885_start_dma(struct cx23885_tsport *port,
switch (dev->bridge) {
case CX23885_BRIDGE_885:
case CX23885_BRIDGE_887:
+ case CX23885_BRIDGE_888:
/* enable irqs */
dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
cx_set(port->reg_ts_int_msk, port->ts_int_msk_val);
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 86ac529e62be..45e13ee66dc7 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -255,15 +255,18 @@ static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
static struct tda18271_config hauppauge_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
};
static struct tda18271_config hauppauge_hvr1200_tuner_config = {
.std_map = &hauppauge_hvr1200_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
};
static struct tda18271_config hauppauge_hvr1210_tuner_config = {
.gate = TDA18271_GATE_DIGITAL,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
};
static struct tda18271_std_map hauppauge_hvr127x_std_map = {
@@ -275,6 +278,7 @@ static struct tda18271_std_map hauppauge_hvr127x_std_map = {
static struct tda18271_config hauppauge_hvr127x_config = {
.std_map = &hauppauge_hvr127x_std_map,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
};
static struct lgdt3305_config hauppauge_lgdt3305_config = {
@@ -396,7 +400,7 @@ static struct stv0900_reg stv0900_ts_regs[] = {
static struct stv0900_config netup_stv0900_config = {
.demod_address = 0x68,
- .xtal = 27000000,
+ .xtal = 8000000,
.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
.diseqc_mode = 2,/* 2/3 PWM */
.ts_config_regs = stv0900_ts_regs,
@@ -408,14 +412,14 @@ static struct stv0900_config netup_stv0900_config = {
static struct stv6110_config netup_stv6110_tunerconfig_a = {
.i2c_address = 0x60,
- .mclk = 27000000,
- .iq_wiring = 0,
+ .mclk = 16000000,
+ .clk_div = 1,
};
static struct stv6110_config netup_stv6110_tunerconfig_b = {
.i2c_address = 0x63,
- .mclk = 27000000,
- .iq_wiring = 1,
+ .mclk = 16000000,
+ .clk_div = 1,
};
static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
@@ -487,6 +491,26 @@ static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
port->set_frontend_save(fe, param) : -ENODEV;
}
+static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
+ .prod = LGS8GXX_PROD_LGS8G75,
+ .demod_address = 0x19,
+ .serial_ts = 0,
+ .ts_clk_pol = 1,
+ .ts_clk_gated = 1,
+ .if_clk_freq = 30400, /* 30.4 MHz */
+ .if_freq = 6500, /* 6.50 MHz */
+ .if_neg_center = 1,
+ .ext_adc = 0,
+ .adc_signed = 1,
+ .adc_vpp = 2, /* 1.6 Vpp */
+ .if_neg_edge = 1,
+};
+
+static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 6500,
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -723,6 +747,7 @@ static int dvb_register(struct cx23885_tsport *port)
}
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+ case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(zl10353_attach,
@@ -833,6 +858,30 @@ static int dvb_register(struct cx23885_tsport *port)
&mygica_x8506_xc5000_config);
}
break;
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+ &magicpro_prohdtve2_lgs8g75_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &magicpro_prohdtve2_xc5000_config);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+ &hcw_s5h1411_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[0].i2c_adap,
+ &hauppauge_tda18271_config);
+ break;
+
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 384dec34134f..4172cb387420 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -283,7 +283,6 @@ static struct i2c_algorithm cx23885_i2c_algo_template = {
static struct i2c_adapter cx23885_i2c_adap_template = {
.name = "cx23885",
.owner = THIS_MODULE,
- .id = I2C_HW_B_CX23885,
.algo = &cx23885_i2c_algo_template,
};
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 5d6093336300..654cc253cd50 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1521,11 +1521,11 @@ int cx23885_video_register(struct cx23885_dev *dev)
if (dev->tuner_addr)
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
- "tuner", "tuner", dev->tuner_addr);
+ "tuner", "tuner", dev->tuner_addr, NULL);
else
- sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
- "tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_TV));
+ "tuner", "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
if (sd) {
struct tuner_setup tun_setup;
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 214a55e943b7..cc7a165561ff 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -76,6 +76,9 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1255 20
#define CX23885_BOARD_HAUPPAUGE_HVR1210 21
#define CX23885_BOARD_MYGICA_X8506 22
+#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23
+#define CX23885_BOARD_HAUPPAUGE_HVR1850 24
+#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
@@ -87,6 +90,12 @@
#define GPIO_7 0x00000080
#define GPIO_8 0x00000100
#define GPIO_9 0x00000200
+#define GPIO_10 0x00000400
+#define GPIO_11 0x00000800
+#define GPIO_12 0x00001000
+#define GPIO_13 0x00002000
+#define GPIO_14 0x00004000
+#define GPIO_15 0x00008000
/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
#define CX23885_NORMS (\
@@ -317,6 +326,7 @@ struct cx23885_dev {
int nr;
struct mutex lock;
+ struct mutex gpio_lock;
/* board details */
unsigned int board;
@@ -331,6 +341,7 @@ struct cx23885_dev {
CX23885_BRIDGE_UNDEFINED = 0,
CX23885_BRIDGE_885 = 885,
CX23885_BRIDGE_887 = 887,
+ CX23885_BRIDGE_888 = 888,
} bridge;
/* Analog video */
@@ -395,7 +406,7 @@ struct sram_channel {
u32 cmds_start;
u32 ctrl_start;
u32 cdt;
- u32 fifo_start;;
+ u32 fifo_start;
u32 fifo_size;
u32 ptr1_reg;
u32 ptr2_reg;
@@ -504,6 +515,9 @@ extern void cx23885_417_check_encoder(struct cx23885_dev *dev);
extern void cx23885_mc417_init(struct cx23885_dev *dev);
extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value);
extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value);
+extern void mc417_gpio_set(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput);
/* ----------------------------------------------------------- */
diff --git a/drivers/media/video/cx23885/netup-eeprom.c b/drivers/media/video/cx23885/netup-eeprom.c
index 042bbbbd48f8..98a48f500684 100644
--- a/drivers/media/video/cx23885/netup-eeprom.c
+++ b/drivers/media/video/cx23885/netup-eeprom.c
@@ -97,11 +97,11 @@ void netup_get_card_info(struct i2c_adapter *i2c_adap,
{
int i, j;
- cinfo->rev = netup_eeprom_read(i2c_adap, 13);
+ cinfo->rev = netup_eeprom_read(i2c_adap, 63);
- for (i = 0, j = 0; i < 6; i++, j++)
+ for (i = 64, j = 0; i < 70; i++, j++)
cinfo->port[0].mac[j] = netup_eeprom_read(i2c_adap, i);
- for (i = 6, j = 0; i < 12; i++, j++)
+ for (i = 70, j = 0; i < 76; i++, j++)
cinfo->port[1].mac[j] = netup_eeprom_read(i2c_adap, i);
};
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-21 11:10:51 +0200