diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 96 |
1 files changed, 95 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index f906c206901d..ed00d6ddd5fd 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -53,6 +53,10 @@ #define ESDHC_TUNING_BLOCK_PATTERN_LEN 64 +/* pinctrl state */ +#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz" +#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz" + /* * Our interpretation of the SDHCI_HOST_CONTROL register */ @@ -94,6 +98,9 @@ struct pltfm_imx_data { u32 scratchpad; enum imx_esdhc_type devtype; struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_100mhz; + struct pinctrl_state *pins_200mhz; struct esdhc_platform_data boarddata; struct clk *clk_ipg; struct clk *clk_ahb; @@ -693,6 +700,62 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode) return ret; } +static int esdhc_change_pinstate(struct sdhci_host *host, + unsigned int uhs) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + struct pinctrl_state *pinctrl; + + dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs); + + if (IS_ERR(imx_data->pinctrl) || + IS_ERR(imx_data->pins_default) || + IS_ERR(imx_data->pins_100mhz) || + IS_ERR(imx_data->pins_200mhz)) + return -EINVAL; + + switch (uhs) { + case MMC_TIMING_UHS_SDR50: + pinctrl = imx_data->pins_100mhz; + break; + case MMC_TIMING_UHS_SDR104: + pinctrl = imx_data->pins_200mhz; + break; + default: + /* back to default state for other legacy timing */ + pinctrl = imx_data->pins_default; + } + + return pinctrl_select_state(imx_data->pinctrl, pinctrl); +} + +static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + + switch (uhs) { + case MMC_TIMING_UHS_SDR12: + imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR12; + break; + case MMC_TIMING_UHS_SDR25: + imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR25; + break; + case MMC_TIMING_UHS_SDR50: + imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR50; + break; + case MMC_TIMING_UHS_SDR104: + imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR104; + break; + case MMC_TIMING_UHS_DDR50: + imx_data->uhs_mode = SDHCI_CTRL_UHS_DDR50; + break; + } + + return esdhc_change_pinstate(host, uhs); +} + static const struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl_le, .read_w = esdhc_readw_le, @@ -704,6 +767,7 @@ static const struct sdhci_ops sdhci_esdhc_ops = { .get_min_clock = esdhc_pltfm_get_min_clock, .get_ro = esdhc_pltfm_get_ro, .platform_bus_width = esdhc_pltfm_bus_width, + .set_uhs_signaling = esdhc_set_uhs_signaling, .platform_execute_tuning = esdhc_executing_tuning, }; @@ -746,6 +810,11 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, of_property_read_u32(np, "max-frequency", &boarddata->f_max); + if (of_find_property(np, "no-1-8-v", NULL)) + boarddata->support_vsel = false; + else + boarddata->support_vsel = true; + return 0; } #else @@ -808,12 +877,20 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) clk_prepare_enable(imx_data->clk_ipg); clk_prepare_enable(imx_data->clk_ahb); - imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + imx_data->pinctrl = devm_pinctrl_get(&pdev->dev); if (IS_ERR(imx_data->pinctrl)) { err = PTR_ERR(imx_data->pinctrl); goto disable_clk; } + imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(imx_data->pins_default)) { + err = PTR_ERR(imx_data->pins_default); + dev_err(mmc_dev(host->mmc), "could not get default state\n"); + goto disable_clk; + } + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data)) @@ -890,6 +967,23 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) break; } + /* sdr50 and sdr104 needs work on 1.8v signal voltage */ + if ((boarddata->support_vsel) && is_imx6q_usdhc(imx_data)) { + imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_100MHZ); + imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_200MHZ); + if (IS_ERR(imx_data->pins_100mhz) || + IS_ERR(imx_data->pins_200mhz)) { + dev_warn(mmc_dev(host->mmc), + "could not get ultra high speed state, work on normal mode\n"); + /* fall back to not support uhs by specify no 1.8v quirk */ + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + } else { + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + err = sdhci_add_host(host); if (err) goto disable_clk; |