diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/card/sdio_uart.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/core/core.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/host/bfin_sdh.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/jz4740_mmc.c | 5 | ||||
| -rw-r--r-- | drivers/mmc/host/mmc_spi.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.c | 443 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.h | 20 | ||||
| -rw-r--r-- | drivers/mmc/host/msm_sdcc.c | 52 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-of-core.c | 15 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-s3c.c | 36 | ||||
| -rw-r--r-- | drivers/mmc/host/ushc.c | 1 |
12 files changed, 411 insertions, 176 deletions
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index a0716967b7c8..c8c9edb3d7cb 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -956,7 +956,7 @@ static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state) return 0; } -static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) +static int sdio_uart_tiocmget(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; int result; @@ -970,7 +970,7 @@ static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file, +static int sdio_uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct sdio_uart_port *port = tty->driver_data; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 6625c057be05..150b5f3cd401 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1529,7 +1529,7 @@ void mmc_rescan(struct work_struct *work) * still present */ if (host->bus_ops && host->bus_ops->detect && !host->bus_dead - && mmc_card_is_removable(host)) + && !(host->caps & MMC_CAP_NONREMOVABLE)) host->bus_ops->detect(host); /* diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 5c4a54d9b6a4..ebc62ad4cc56 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -792,7 +792,6 @@ int mmc_attach_sdio(struct mmc_host *host) */ mmc_release_host(host); err = mmc_add_card(host->card); - mmc_claim_host(host); if (err) goto remove_added; @@ -805,12 +804,12 @@ int mmc_attach_sdio(struct mmc_host *host) goto remove_added; } + mmc_claim_host(host); return 0; remove_added: /* Remove without lock if the device has been added. */ - mmc_release_host(host); mmc_sdio_remove(host); mmc_claim_host(host); remove: diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index bac7d62866b7..0371bf502249 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -462,7 +462,7 @@ static int __devinit sdh_probe(struct platform_device *pdev) goto out; } - mmc = mmc_alloc_host(sizeof(*mmc), &pdev->dev); + mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; goto out; diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index b3a0ab0e4c2b..74218ad677e4 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -14,6 +14,7 @@ */ #include <linux/mmc/host.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -827,8 +828,8 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev) } host->clk = clk_get(&pdev->dev, "mmc"); - if (!host->clk) { - ret = -ENOENT; + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); dev_err(&pdev->dev, "Failed to get mmc clock\n"); goto err_free_host; } diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index fd877f633dd2..2f7fc0c5146f 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1516,21 +1516,17 @@ static int __devexit mmc_spi_remove(struct spi_device *spi) return 0; } -#if defined(CONFIG_OF) static struct of_device_id mmc_spi_of_match_table[] __devinitdata = { { .compatible = "mmc-spi-slot", }, {}, }; -#endif static struct spi_driver mmc_spi_driver = { .driver = { .name = "mmc_spi", .bus = &spi_bus_type, .owner = THIS_MODULE, -#if defined(CONFIG_OF) .of_match_table = mmc_spi_of_match_table, -#endif }, .probe = mmc_spi_probe, .remove = __devexit_p(mmc_spi_remove), diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 563022825667..5bbb87d10251 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -2,7 +2,7 @@ * linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * Copyright (C) 2010 ST-Ericsson AB. + * Copyright (C) 2010 ST-Ericsson SA * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,6 +14,7 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/interrupt.h> +#include <linux/kernel.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/highmem.h> @@ -24,8 +25,10 @@ #include <linux/clk.h> #include <linux/scatterlist.h> #include <linux/gpio.h> -#include <linux/amba/mmci.h> #include <linux/regulator/consumer.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/amba/mmci.h> #include <asm/div64.h> #include <asm/io.h> @@ -46,10 +49,6 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) - * @broken_blockend: the MCI_DATABLOCKEND is broken on the hardware - * and will not work at all. - * @broken_blockend_dma: the MCI_DATABLOCKEND is broken on the hardware when - * using DMA. * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm */ @@ -59,8 +58,6 @@ struct variant_data { unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; - bool broken_blockend; - bool broken_blockend_dma; bool sdio; bool st_clkdiv; }; @@ -76,7 +73,6 @@ static struct variant_data variant_u300 = { .fifohalfsize = 8 * 4, .clkreg_enable = 1 << 13, /* HWFCEN */ .datalength_bits = 16, - .broken_blockend_dma = true, .sdio = true, }; @@ -86,7 +82,6 @@ static struct variant_data variant_ux500 = { .clkreg = MCI_CLK_ENABLE, .clkreg_enable = 1 << 14, /* HWFCEN */ .datalength_bits = 24, - .broken_blockend = true, .sdio = true, .st_clkdiv = true, }; @@ -149,9 +144,6 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) host->mrq = NULL; host->cmd = NULL; - if (mrq->data) - mrq->data->bytes_xfered = host->data_xfered; - /* * Need to drop the host lock here; mmc_request_done may call * back into the driver... @@ -196,6 +188,248 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); } +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE +static void __devinit mmci_dma_setup(struct mmci_host *host) +{ + struct mmci_platform_data *plat = host->plat; + const char *rxname, *txname; + dma_cap_mask_t mask; + + if (!plat || !plat->dma_filter) { + dev_info(mmc_dev(host->mmc), "no DMA platform data\n"); + return; + } + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* + * If only an RX channel is specified, the driver will + * attempt to use it bidirectionally, however if it is + * is specified but cannot be located, DMA will be disabled. + */ + if (plat->dma_rx_param) { + host->dma_rx_channel = dma_request_channel(mask, + plat->dma_filter, + plat->dma_rx_param); + /* E.g if no DMA hardware is present */ + if (!host->dma_rx_channel) + dev_err(mmc_dev(host->mmc), "no RX DMA channel\n"); + } + + if (plat->dma_tx_param) { + host->dma_tx_channel = dma_request_channel(mask, + plat->dma_filter, + plat->dma_tx_param); + if (!host->dma_tx_channel) + dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n"); + } else { + host->dma_tx_channel = host->dma_rx_channel; + } + + if (host->dma_rx_channel) + rxname = dma_chan_name(host->dma_rx_channel); + else + rxname = "none"; + + if (host->dma_tx_channel) + txname = dma_chan_name(host->dma_tx_channel); + else + txname = "none"; + + dev_info(mmc_dev(host->mmc), "DMA channels RX %s, TX %s\n", + rxname, txname); + + /* + * Limit the maximum segment size in any SG entry according to + * the parameters of the DMA engine device. + */ + if (host->dma_tx_channel) { + struct device *dev = host->dma_tx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } + if (host->dma_rx_channel) { + struct device *dev = host->dma_rx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } +} + +/* + * This is used in __devinit or __devexit so inline it + * so it can be discarded. + */ +static inline void mmci_dma_release(struct mmci_host *host) +{ + struct mmci_platform_data *plat = host->plat; + + if (host->dma_rx_channel) + dma_release_channel(host->dma_rx_channel); + if (host->dma_tx_channel && plat->dma_tx_param) + dma_release_channel(host->dma_tx_channel); + host->dma_rx_channel = host->dma_tx_channel = NULL; +} + +static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ + struct dma_chan *chan = host->dma_current; + enum dma_data_direction dir; + u32 status; + int i; + + /* Wait up to 1ms for the DMA to complete */ + for (i = 0; ; i++) { + status = readl(host->base + MMCISTATUS); + if (!(status & MCI_RXDATAAVLBLMASK) || i >= 100) + break; + udelay(10); + } + + /* + * Check to see whether we still have some data left in the FIFO - + * this catches DMA controllers which are unable to monitor the + * DMALBREQ and DMALSREQ signals while allowing us to DMA to non- + * contiguous buffers. On TX, we'll get a FIFO underrun error. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dmaengine_terminate_all(chan); + if (!data->error) + data->error = -EIO; + } + + if (data->flags & MMC_DATA_WRITE) { + dir = DMA_TO_DEVICE; + } else { + dir = DMA_FROM_DEVICE; + } + + dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir); + + /* + * Use of DMA with scatter-gather is impossible. + * Give up with DMA and switch back to PIO mode. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n"); + mmci_dma_release(host); + } +} + +static void mmci_dma_data_error(struct mmci_host *host) +{ + dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n"); + dmaengine_terminate_all(host->dma_current); +} + +static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + struct variant_data *variant = host->variant; + struct dma_slave_config conf = { + .src_addr = host->phybase + MMCIFIFO, + .dst_addr = host->phybase + MMCIFIFO, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */ + }; + struct mmc_data *data = host->data; + struct dma_chan *chan; + struct dma_device *device; + struct dma_async_tx_descriptor *desc; + int nr_sg; + + host->dma_current = NULL; + + if (data->flags & MMC_DATA_READ) { + conf.direction = DMA_FROM_DEVICE; + chan = host->dma_rx_channel; + } else { + conf.direction = DMA_TO_DEVICE; + chan = host->dma_tx_channel; + } + + /* If there's no DMA channel, fall back to PIO */ + if (!chan) + return -EINVAL; + + /* If less than or equal to the fifo size, don't bother with DMA */ + if (host->size <= variant->fifosize) + return -EINVAL; + + device = chan->device; + nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, conf.direction); + if (nr_sg == 0) + return -EINVAL; + + dmaengine_slave_config(chan, &conf); + desc = device->device_prep_slave_sg(chan, data->sg, nr_sg, + conf.direction, DMA_CTRL_ACK); + if (!desc) + goto unmap_exit; + + /* Okay, go for it. */ + host->dma_current = chan; + + dev_vdbg(mmc_dev(host->mmc), + "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n", + data->sg_len, data->blksz, data->blocks, data->flags); + dmaengine_submit(desc); + dma_async_issue_pending(chan); + + datactrl |= MCI_DPSM_DMAENABLE; + + /* Trigger the DMA transfer */ + writel(datactrl, host->base + MMCIDATACTRL); + + /* + * Let the MMCI say when the data is ended and it's time + * to fire next DMA request. When that happens, MMCI will + * call mmci_data_end() + */ + writel(readl(host->base + MMCIMASK0) | MCI_DATAENDMASK, + host->base + MMCIMASK0); + return 0; + +unmap_exit: + dmaengine_terminate_all(chan); + dma_unmap_sg(device->dev, data->sg, data->sg_len, conf.direction); + return -ENOMEM; +} +#else +/* Blank functions if the DMA engine is not available */ +static inline void mmci_dma_setup(struct mmci_host *host) +{ +} + +static inline void mmci_dma_release(struct mmci_host *host) +{ +} + +static inline void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ +} + +static inline void mmci_dma_data_error(struct mmci_host *host) +{ +} + +static inline int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + return -ENOSYS; +} +#endif + static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) { struct variant_data *variant = host->variant; @@ -209,11 +443,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) host->data = data; host->size = data->blksz * data->blocks; - host->data_xfered = 0; - host->blockend = false; - host->dataend = false; - - mmci_init_sg(host, data); + data->bytes_xfered = 0; clks = (unsigned long long)data->timeout_ns * host->cclk; do_div(clks, 1000000000UL); @@ -228,15 +458,29 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) BUG_ON(1 << blksz_bits != data->blksz); datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; - if (data->flags & MMC_DATA_READ) { + + if (data->flags & MMC_DATA_READ) datactrl |= MCI_DPSM_DIRECTION; + + /* + * Attempt to use DMA operation mode, if this + * should fail, fall back to PIO mode + */ + if (!mmci_dma_start_data(host, datactrl)) + return; + + /* IRQ mode, map the SG list for CPU reading/writing */ + mmci_init_sg(host, data); + + if (data->flags & MMC_DATA_READ) { irqmask = MCI_RXFIFOHALFFULLMASK; /* - * If we have less than a FIFOSIZE of bytes to transfer, - * trigger a PIO interrupt as soon as any data is available. + * If we have less than the fifo 'half-full' threshold to + * transfer, trigger a PIO interrupt as soon as any data + * is available. */ - if (host->size < variant->fifosize) + if (host->size < variant->fifohalfsize) irqmask |= MCI_RXDATAAVLBLMASK; } else { /* @@ -288,95 +532,55 @@ static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { - struct variant_data *variant = host->variant; - /* First check for errors */ if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { - dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); - if (status & MCI_DATACRCFAIL) - data->error = -EILSEQ; - else if (status & MCI_DATATIMEOUT) - data->error = -ETIMEDOUT; - else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) - data->error = -EIO; + u32 remain, success; - /* Force-complete the transaction */ - host->blockend = true; - host->dataend = true; + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) + mmci_dma_data_error(host); /* - * We hit an error condition. Ensure that any data - * partially written to a page is properly coherent. + * Calculate how far we are into the transfer. Note that + * the data counter gives the number of bytes transferred + * on the MMC bus, not on the host side. On reads, this + * can be as much as a FIFO-worth of data ahead. This + * matters for FIFO overruns only. */ - if (data->flags & MMC_DATA_READ) { - struct sg_mapping_iter *sg_miter = &host->sg_miter; - unsigned long flags; - - local_irq_save(flags); - if (sg_miter_next(sg_miter)) { - flush_dcache_page(sg_miter->page); - sg_miter_stop(sg_miter); - } - local_irq_restore(flags); + remain = readl(host->base + MMCIDATACNT); + success = data->blksz * data->blocks - remain; + + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n", + status, success); + if (status & MCI_DATACRCFAIL) { + /* Last block was not successful */ + success -= 1; + data->error = -EILSEQ; + } else if (status & MCI_DATATIMEOUT) { + data->error = -ETIMEDOUT; + } else if (status & MCI_TXUNDERRUN) { + data->error = -EIO; + } else if (status & MCI_RXOVERRUN) { + if (success > host->variant->fifosize) + success -= host->variant->fifosize; + else + success = 0; + data->error = -EIO; } + data->bytes_xfered = round_down(success, data->blksz); } - /* - * On ARM variants in PIO mode, MCI_DATABLOCKEND - * is always sent first, and we increase the - * transfered number of bytes for that IRQ. Then - * MCI_DATAEND follows and we conclude the transaction. - * - * On the Ux500 single-IRQ variant MCI_DATABLOCKEND - * doesn't seem to immediately clear from the status, - * so we can't use it keep count when only one irq is - * used because the irq will hit for other reasons, and - * then the flag is still up. So we use the MCI_DATAEND - * IRQ at the end of the entire transfer because - * MCI_DATABLOCKEND is broken. - * - * In the U300, the IRQs can arrive out-of-order, - * e.g. MCI_DATABLOCKEND sometimes arrives after MCI_DATAEND, - * so for this case we use the flags "blockend" and - * "dataend" to make sure both IRQs have arrived before - * concluding the transaction. (This does not apply - * to the Ux500 which doesn't fire MCI_DATABLOCKEND - * at all.) In DMA mode it suffers from the same problem - * as the Ux500. - */ - if (status & MCI_DATABLOCKEND) { - /* - * Just being a little over-cautious, we do not - * use this progressive update if the hardware blockend - * flag is unreliable: since it can stay high between - * IRQs it will corrupt the transfer counter. - */ - if (!variant->broken_blockend) - host->data_xfered += data->blksz; - host->blockend = true; - } + if (status & MCI_DATABLOCKEND) + dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); - if (status & MCI_DATAEND) - host->dataend = true; - - /* - * On variants with broken blockend we shall only wait for dataend, - * on others we must sync with the blockend signal since they can - * appear out-of-order. - */ - if (host->dataend && (host->blockend || variant->broken_blockend)) { + if (status & MCI_DATAEND || data->error) { + if (dma_inprogress(host)) + mmci_dma_unmap(host, data); mmci_stop_data(host); - /* Reset these flags */ - host->blockend = false; - host->dataend = false; - - /* - * Variants with broken blockend flags need to handle the - * end of the entire transfer here. - */ - if (variant->broken_blockend && !data->error) - host->data_xfered += data->blksz * data->blocks; + if (!data->error) + /* The error clause is handled above, success! */ + data->bytes_xfered = data->blksz * data->blocks; if (!data->stop) { mmci_request_end(host, data->mrq); @@ -394,15 +598,15 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, host->cmd = NULL; - cmd->resp[0] = readl(base + MMCIRESPONSE0); - cmd->resp[1] = readl(base + MMCIRESPONSE1); - cmd->resp[2] = readl(base + MMCIRESPONSE2); - cmd->resp[3] = readl(base + MMCIRESPONSE3); - if (status & MCI_CMDTIMEOUT) { cmd->error = -ETIMEDOUT; } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { cmd->error = -EILSEQ; + } else { + cmd->resp[0] = readl(base + MMCIRESPONSE0); + cmd->resp[1] = readl(base + MMCIRESPONSE1); + cmd->resp[2] = readl(base + MMCIRESPONSE2); + cmd->resp[3] = readl(base + MMCIRESPONSE3); } if (!cmd->data || cmd->error) { @@ -549,9 +753,6 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) if (remain) break; - if (status & MCI_RXACTIVE) - flush_dcache_page(sg_miter->page); - status = readl(base + MMCISTATUS); } while (1); @@ -560,10 +761,10 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) local_irq_restore(flags); /* - * If we're nearing the end of the read, switch to - * "any data available" mode. + * If we have less than the fifo 'half-full' threshold to transfer, + * trigger a PIO interrupt as soon as any data is available. */ - if (status & MCI_RXACTIVE && host->size < variant->fifosize) + if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize) mmci_set_mask1(host, MCI_RXDATAAVLBLMASK); /* @@ -764,13 +965,13 @@ static const struct mmc_host_ops mmci_ops = { .get_cd = mmci_get_cd, }; -static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) +static int __devinit mmci_probe(struct amba_device *dev, + const struct amba_id *id) { struct mmci_platform_data *plat = dev->dev.platform_data; struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; - unsigned int mask; int ret; /* must have platform data */ @@ -828,6 +1029,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n", host->mclk); } + host->phybase = dev->res.start; host->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!host->base) { ret = -ENOMEM; @@ -951,18 +1153,16 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) goto irq0_free; } - mask = MCI_IRQENABLE; - /* Don't use the datablockend flag if it's broken */ - if (variant->broken_blockend) - mask &= ~MCI_DATABLOCKEND; - - writel(mask, host->base + MMCIMASK0); + writel(MCI_IRQENABLE, host->base + MMCIMASK0); amba_set_drvdata(dev, mmc); - dev_info(&dev->dev, "%s: PL%03x rev%u at 0x%08llx irq %d,%d\n", - mmc_hostname(mmc), amba_part(dev), amba_rev(dev), - (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); + dev_info(&dev->dev, "%s: PL%03x manf %x rev%u at 0x%08llx irq %d,%d (pio)\n", + mmc_hostname(mmc), amba_part(dev), amba_manf(dev), + amba_rev(dev), (unsigned long long)dev->res.start, + dev->irq[0], dev->irq[1]); + + mmci_dma_setup(host); mmc_add_host(mmc); @@ -1009,6 +1209,7 @@ static int __devexit mmci_remove(struct amba_device *dev) writel(0, host->base + MMCICOMMAND); writel(0, host->base + MMCIDATACTRL); + mmci_dma_release(host); free_irq(dev->irq[0], host); if (!host->singleirq) free_irq(dev->irq[1], host); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index df06f01aac89..ec9a7bc6d0df 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -137,7 +137,7 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ #define MCI_IRQ1MASK \ @@ -148,8 +148,10 @@ struct clk; struct variant_data; +struct dma_chan; struct mmci_host { + phys_addr_t phybase; void __iomem *base; struct mmc_request *mrq; struct mmc_command *cmd; @@ -161,8 +163,6 @@ struct mmci_host { int gpio_cd_irq; bool singleirq; - unsigned int data_xfered; - spinlock_t lock; unsigned int mclk; @@ -177,12 +177,20 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; - bool blockend; - bool dataend; - /* pio stuff */ struct sg_mapping_iter sg_miter; unsigned int size; struct regulator *vcc; + +#ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + struct dma_chan *dma_current; + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + +#define dma_inprogress(host) ((host)->dma_current) +#else +#define dma_inprogress(host) (0) +#endif }; diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c index 5decfd0bd61d..153ab977a013 100644 --- a/drivers/mmc/host/msm_sdcc.c +++ b/drivers/mmc/host/msm_sdcc.c @@ -383,14 +383,30 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) host->curr.user_pages = 0; box = &nc->cmd[0]; - for (i = 0; i < host->dma.num_ents; i++) { - box->cmd = CMD_MODE_BOX; - /* Initialize sg dma address */ - sg->dma_address = page_to_dma(mmc_dev(host->mmc), sg_page(sg)) - + sg->offset; + /* location of command block must be 64 bit aligned */ + BUG_ON(host->dma.cmd_busaddr & 0x07); - if (i == (host->dma.num_ents - 1)) + nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; + host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | + DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); + host->dma.hdr.complete_func = msmsdcc_dma_complete_func; + + n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, + host->dma.num_ents, host->dma.dir); + if (n == 0) { + printk(KERN_ERR "%s: Unable to map in all sg elements\n", + mmc_hostname(host->mmc)); + host->dma.sg = NULL; + host->dma.num_ents = 0; + return -ENOMEM; + } + + for_each_sg(host->dma.sg, sg, n, i) { + + box->cmd = CMD_MODE_BOX; + + if (i == n - 1) box->cmd |= CMD_LC; rows = (sg_dma_len(sg) % MCI_FIFOSIZE) ? (sg_dma_len(sg) / MCI_FIFOSIZE) + 1 : @@ -418,27 +434,6 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) box->cmd |= CMD_DST_CRCI(crci); } box++; - sg++; - } - - /* location of command block must be 64 bit aligned */ - BUG_ON(host->dma.cmd_busaddr & 0x07); - - nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; - host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | - DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); - host->dma.hdr.complete_func = msmsdcc_dma_complete_func; - - n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, - host->dma.num_ents, host->dma.dir); -/* dsb inside dma_map_sg will write nc out to mem as well */ - - if (n != host->dma.num_ents) { - printk(KERN_ERR "%s: Unable to map in all sg elements\n", - mmc_hostname(host->mmc)); - host->dma.sg = NULL; - host->dma.num_ents = 0; - return -ENOMEM; } return 0; @@ -1331,9 +1326,6 @@ msmsdcc_probe(struct platform_device *pdev) if (host->timer.function) pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc)); -#if BUSCLK_PWRSAVE - msmsdcc_disable_clocks(host, 1); -#endif return 0; cmd_irq_free: free_irq(cmd_irqres->start, host); diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c index dd84124f4209..f9b611fc773e 100644 --- a/drivers/mmc/host/sdhci-of-core.c +++ b/drivers/mmc/host/sdhci-of-core.c @@ -124,17 +124,20 @@ static bool __devinit sdhci_of_wp_inverted(struct device_node *np) #endif } -static int __devinit sdhci_of_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int __devinit sdhci_of_probe(struct platform_device *ofdev) { struct device_node *np = ofdev->dev.of_node; - struct sdhci_of_data *sdhci_of_data = match->data; + struct sdhci_of_data *sdhci_of_data; struct sdhci_host *host; struct sdhci_of_host *of_host; const __be32 *clk; int size; int ret; + if (!ofdev->dev.of_match) + return -EINVAL; + sdhci_of_data = ofdev->dev.of_match->data; + if (!of_device_is_available(np)) return -ENODEV; @@ -217,7 +220,7 @@ static const struct of_device_id sdhci_of_match[] = { }; MODULE_DEVICE_TABLE(of, sdhci_of_match); -static struct of_platform_driver sdhci_of_driver = { +static struct platform_driver sdhci_of_driver = { .driver = { .name = "sdhci-of", .owner = THIS_MODULE, @@ -231,13 +234,13 @@ static struct of_platform_driver sdhci_of_driver = { static int __init sdhci_of_init(void) { - return of_register_platform_driver(&sdhci_of_driver); + return platform_driver_register(&sdhci_of_driver); } module_init(sdhci_of_init); static void __exit sdhci_of_exit(void) { - of_unregister_platform_driver(&sdhci_of_driver); + platform_driver_unregister(&sdhci_of_driver); } module_exit(sdhci_of_exit); diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 17203586305c..5309ab95aada 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -277,10 +277,43 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) host->clock = clock; } +/** + * sdhci_s3c_platform_8bit_width - support 8bit buswidth + * @host: The SDHCI host being queried + * @width: MMC_BUS_WIDTH_ macro for the bus width being requested + * + * We have 8-bit width support but is not a v3 controller. + * So we add platform_8bit_width() and support 8bit width. + */ +static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + + switch (width) { + case MMC_BUS_WIDTH_8: + ctrl |= SDHCI_CTRL_8BITBUS; + ctrl &= ~SDHCI_CTRL_4BITBUS; + break; + case MMC_BUS_WIDTH_4: + ctrl |= SDHCI_CTRL_4BITBUS; + ctrl &= ~SDHCI_CTRL_8BITBUS; + break; + default: + break; + } + + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + + return 0; +} + static struct sdhci_ops sdhci_s3c_ops = { .get_max_clock = sdhci_s3c_get_max_clk, .set_clock = sdhci_s3c_set_clock, .get_min_clock = sdhci_s3c_get_min_clock, + .platform_8bit_width = sdhci_s3c_platform_8bit_width, }; static void sdhci_s3c_notify_change(struct platform_device *dev, int state) @@ -473,6 +506,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT) host->mmc->caps = MMC_CAP_NONREMOVABLE; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE); diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c index f8f65df9b017..f08f944ac53c 100644 --- a/drivers/mmc/host/ushc.c +++ b/drivers/mmc/host/ushc.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/kernel.h> -#include <linux/usb.h> #include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/mmc/host.h> |