diff options
Diffstat (limited to 'drivers/mtd/nand/nand_base.c')
| -rw-r--r-- | drivers/mtd/nand/nand_base.c | 53 |
1 files changed, 40 insertions, 13 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d474378ed810..bf8486c406d3 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -202,7 +202,7 @@ static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section, return 0; } -const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = { +static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = { .ecc = nand_ooblayout_ecc_lp_hamming, .free = nand_ooblayout_free_lp_hamming, }; @@ -502,10 +502,12 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) * specify how to write bad block markers to OOB (chip->block_markbad). * * We try operations in the following order: + * * (1) erase the affected block, to allow OOB marker to be written cleanly * (2) write bad block marker to OOB area of affected block (unless flag * NAND_BBT_NO_OOB_BBM is present) * (3) update the BBT + * * Note that we retain the first error encountered in (2) or (3), finish the * procedures, and dump the error in the end. */ @@ -1219,9 +1221,10 @@ int nand_reset(struct nand_chip *chip, int chipnr) * @mtd: mtd info * @ofs: offset to start unlock from * @len: length to unlock - * @invert: when = 0, unlock the range of blocks within the lower and + * @invert: + * - when = 0, unlock the range of blocks within the lower and * upper boundary address - * when = 1, unlock the range of blocks outside the boundaries + * - when = 1, unlock the range of blocks outside the boundaries * of the lower and upper boundary address * * Returs unlock status. @@ -4361,7 +4364,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, /* Initialize the ->data_interface field. */ ret = nand_init_data_interface(chip); if (ret) - return ret; + goto err_nand_init; /* * Setup the data interface correctly on the chip and controller side. @@ -4373,7 +4376,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, */ ret = nand_setup_data_interface(chip); if (ret) - return ret; + goto err_nand_init; nand_maf_id = chip->id.data[0]; nand_dev_id = chip->id.data[1]; @@ -4404,6 +4407,12 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, mtd->size = i * chip->chipsize; return 0; + +err_nand_init: + /* Free manufacturer priv data. */ + nand_manufacturer_cleanup(chip); + + return ret; } EXPORT_SYMBOL(nand_scan_ident); @@ -4574,18 +4583,23 @@ int nand_scan_tail(struct mtd_info *mtd) /* New bad blocks should be marked in OOB, flash-based BBT, or both */ if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && - !(chip->bbt_options & NAND_BBT_USE_FLASH))) - return -EINVAL; + !(chip->bbt_options & NAND_BBT_USE_FLASH))) { + ret = -EINVAL; + goto err_ident; + } if (invalid_ecc_page_accessors(chip)) { pr_err("Invalid ECC page accessors setup\n"); - return -EINVAL; + ret = -EINVAL; + goto err_ident; } if (!(chip->options & NAND_OWN_BUFFERS)) { nbuf = kzalloc(sizeof(*nbuf), GFP_KERNEL); - if (!nbuf) - return -ENOMEM; + if (!nbuf) { + ret = -ENOMEM; + goto err_ident; + } nbuf->ecccalc = kmalloc(mtd->oobsize, GFP_KERNEL); if (!nbuf->ecccalc) { @@ -4608,8 +4622,10 @@ int nand_scan_tail(struct mtd_info *mtd) chip->buffers = nbuf; } else { - if (!chip->buffers) - return -ENOMEM; + if (!chip->buffers) { + ret = -ENOMEM; + goto err_ident; + } } /* Set the internal oob buffer location, just after the page data */ @@ -4842,7 +4858,11 @@ int nand_scan_tail(struct mtd_info *mtd) return 0; /* Build bad block table */ - return chip->scan_bbt(mtd); + ret = chip->scan_bbt(mtd); + if (ret) + goto err_free; + return 0; + err_free: if (nbuf) { kfree(nbuf->databuf); @@ -4850,6 +4870,13 @@ err_free: kfree(nbuf->ecccalc); kfree(nbuf); } + +err_ident: + /* Clean up nand_scan_ident(). */ + + /* Free manufacturer priv data. */ + nand_manufacturer_cleanup(chip); + return ret; } EXPORT_SYMBOL(nand_scan_tail); |