summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c1105
-rw-r--r--drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h25
2 files changed, 440 insertions, 690 deletions
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index d088b3e77fef..5db84178edff 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -528,26 +528,12 @@ static int common_nfc_set_geometry(struct gpmi_nand_data *this)
static int bch_set_geometry(struct gpmi_nand_data *this)
{
struct resources *r = &this->resources;
- struct bch_geometry *bch_geo = &this->bch_geometry;
- unsigned int block_count;
- unsigned int block_size;
- unsigned int metadata_size;
- unsigned int ecc_strength;
- unsigned int page_size;
- unsigned int gf_len;
int ret;
ret = common_nfc_set_geometry(this);
if (ret)
return ret;
- block_count = bch_geo->ecc_chunk_count - 1;
- block_size = bch_geo->ecc_chunk_size;
- metadata_size = bch_geo->metadata_size;
- ecc_strength = bch_geo->ecc_strength >> 1;
- page_size = bch_geo->page_size;
- gf_len = bch_geo->gf_len;
-
ret = pm_runtime_get_sync(this->dev);
if (ret < 0)
return ret;
@@ -561,27 +547,9 @@ static int bch_set_geometry(struct gpmi_nand_data *this)
if (ret)
goto err_out;
- /* Configure layout 0. */
- writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
- | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
- | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this)
- | BF_BCH_FLASH0LAYOUT0_GF(gf_len, this)
- | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this),
- r->bch_regs + HW_BCH_FLASH0LAYOUT0);
-
- writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
- | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this)
- | BF_BCH_FLASH0LAYOUT1_GF(gf_len, this)
- | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
- r->bch_regs + HW_BCH_FLASH0LAYOUT1);
-
/* Set *all* chip selects to use layout 0. */
writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
- /* Enable interrupts. */
- writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
- r->bch_regs + HW_BCH_CTRL_SET);
-
ret = 0;
err_out:
pm_runtime_mark_last_busy(this->dev);
@@ -795,32 +763,6 @@ static void gpmi_clear_bch(struct gpmi_nand_data *this)
writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
}
-/* Returns the Ready/Busy status of the given chip. */
-static int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
-{
- struct resources *r = &this->resources;
- uint32_t mask = 0;
- uint32_t reg = 0;
-
- if (GPMI_IS_MX23(this)) {
- mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
- reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
- } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
- /*
- * In the imx6, all the ready/busy pins are bound
- * together. So we only need to check chip 0.
- */
- if (GPMI_IS_MX6(this))
- chip = 0;
-
- /* MX28 shares the same R/B register as MX6Q. */
- mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
- reg = readl(r->gpmi_regs + HW_GPMI_STAT);
- } else
- dev_err(this->dev, "unknown arch.\n");
- return reg & mask;
-}
-
static struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
{
/* We use the DMA channel 0 to access all the nand chips. */
@@ -836,29 +778,6 @@ static void dma_irq_callback(void *param)
complete(dma_c);
}
-static int start_dma_without_bch_irq(struct gpmi_nand_data *this,
- struct dma_async_tx_descriptor *desc)
-{
- struct completion *dma_c = &this->dma_done;
- unsigned long timeout;
-
- init_completion(dma_c);
-
- desc->callback = dma_irq_callback;
- desc->callback_param = this;
- dmaengine_submit(desc);
- dma_async_issue_pending(get_dma_chan(this));
-
- /* Wait for the interrupt from the DMA block. */
- timeout = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
- if (!timeout) {
- dev_err(this->dev, "DMA timeout, last DMA\n");
- gpmi_dump_info(this);
- return -ETIMEDOUT;
- }
- return 0;
-}
-
static irqreturn_t bch_irq(int irq, void *cookie)
{
struct gpmi_nand_data *this = cookie;
@@ -868,83 +787,25 @@ static irqreturn_t bch_irq(int irq, void *cookie)
return IRQ_HANDLED;
}
-/*
- * This function is used in BCH reading or BCH writing pages.
- * It will wait for the BCH interrupt as long as ONE second.
- * Actually, we must wait for two interrupts :
- * [1] firstly the DMA interrupt and
- * [2] secondly the BCH interrupt.
- */
-static int start_dma_with_bch_irq(struct gpmi_nand_data *this,
- struct dma_async_tx_descriptor *desc)
+static int gpmi_raw_len_to_len(struct gpmi_nand_data *this, int raw_len)
{
- struct completion *bch_c = &this->bch_done;
- unsigned long timeout;
-
- /* Prepare to receive an interrupt from the BCH block. */
- init_completion(bch_c);
-
- /* start the DMA */
- start_dma_without_bch_irq(this, desc);
-
- /* Wait for the interrupt from the BCH block. */
- timeout = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
- if (!timeout) {
- dev_err(this->dev, "BCH timeout\n");
- gpmi_dump_info(this);
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-static int gpmi_send_command(struct gpmi_nand_data *this)
-{
- struct dma_chan *channel = get_dma_chan(this);
- struct dma_async_tx_descriptor *desc;
- struct scatterlist *sgl;
- int chip = this->current_chip;
- int ret;
- u32 pio[3];
-
- /* [1] send out the PIO words */
- pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
- | BM_GPMI_CTRL0_WORD_LENGTH
- | BF_GPMI_CTRL0_CS(chip, this)
- | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
- | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
- | BM_GPMI_CTRL0_ADDRESS_INCREMENT
- | BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
- pio[1] = pio[2] = 0;
- desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio),
- DMA_TRANS_NONE, 0);
- if (!desc)
- return -EINVAL;
-
- /* [2] send out the COMMAND + ADDRESS string stored in @buffer */
- sgl = &this->cmd_sgl;
-
- sg_init_one(sgl, this->cmd_buffer, this->command_length);
- dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
- desc = dmaengine_prep_slave_sg(channel,
- sgl, 1, DMA_MEM_TO_DEV,
- MXS_DMA_CTRL_WAIT4END);
- if (!desc)
- return -EINVAL;
-
- /* [3] submit the DMA */
- ret = start_dma_without_bch_irq(this, desc);
-
- dma_unmap_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
-
- return ret;
+ /*
+ * raw_len is the length to read/write including bch data which
+ * we are passed in exec_op. Calculate the data length from it.
+ */
+ if (this->bch)
+ return ALIGN_DOWN(raw_len, this->bch_geometry.ecc_chunk_size);
+ else
+ return raw_len;
}
/* Can we use the upper's buffer directly for DMA? */
static bool prepare_data_dma(struct gpmi_nand_data *this, const void *buf,
- int len, enum dma_data_direction dr)
+ int raw_len, struct scatterlist *sgl,
+ enum dma_data_direction dr)
{
- struct scatterlist *sgl = &this->data_sgl;
int ret;
+ int len = gpmi_raw_len_to_len(this, raw_len);
/* first try to map the upper buffer directly */
if (virt_addr_valid(buf) && !object_is_on_stack(buf)) {
@@ -960,7 +821,7 @@ map_fail:
/* We have to use our own DMA buffer. */
sg_init_one(sgl, this->data_buffer_dma, len);
- if (dr == DMA_TO_DEVICE)
+ if (dr == DMA_TO_DEVICE && buf != this->data_buffer_dma)
memcpy(this->data_buffer_dma, buf, len);
dma_map_sg(this->dev, sgl, 1, dr);
@@ -968,208 +829,6 @@ map_fail:
return false;
}
-static int gpmi_send_data(struct gpmi_nand_data *this, const void *buf, int len)
-{
- struct dma_async_tx_descriptor *desc;
- struct dma_chan *channel = get_dma_chan(this);
- int chip = this->current_chip;
- int ret;
- uint32_t command_mode;
- uint32_t address;
- u32 pio[2];
-
- /* [1] PIO */
- command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
- address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
-
- pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
- | BM_GPMI_CTRL0_WORD_LENGTH
- | BF_GPMI_CTRL0_CS(chip, this)
- | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
- | BF_GPMI_CTRL0_ADDRESS(address)
- | BF_GPMI_CTRL0_XFER_COUNT(len);
- pio[1] = 0;
- desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio),
- DMA_TRANS_NONE, 0);
- if (!desc)
- return -EINVAL;
-
- /* [2] send DMA request */
- prepare_data_dma(this, buf, len, DMA_TO_DEVICE);
- desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
- 1, DMA_MEM_TO_DEV,
- MXS_DMA_CTRL_WAIT4END);
- if (!desc)
- return -EINVAL;
-
- /* [3] submit the DMA */
- ret = start_dma_without_bch_irq(this, desc);
-
- dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
-
- return ret;
-}
-
-static int gpmi_read_data(struct gpmi_nand_data *this, void *buf, int len)
-{
- struct dma_async_tx_descriptor *desc;
- struct dma_chan *channel = get_dma_chan(this);
- int chip = this->current_chip;
- int ret;
- u32 pio[2];
- bool direct;
-
- /* [1] : send PIO */
- pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
- | BM_GPMI_CTRL0_WORD_LENGTH
- | BF_GPMI_CTRL0_CS(chip, this)
- | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
- | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
- | BF_GPMI_CTRL0_XFER_COUNT(len);
- pio[1] = 0;
- desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio),
- DMA_TRANS_NONE, 0);
- if (!desc)
- return -EINVAL;
-
- /* [2] : send DMA request */
- direct = prepare_data_dma(this, buf, len, DMA_FROM_DEVICE);
- desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
- 1, DMA_DEV_TO_MEM,
- MXS_DMA_CTRL_WAIT4END);
- if (!desc)
- return -EINVAL;
-
- /* [3] : submit the DMA */
-
- ret = start_dma_without_bch_irq(this, desc);
-
- dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
- if (!direct)
- memcpy(buf, this->data_buffer_dma, len);
-
- return ret;
-}
-
-static int gpmi_send_page(struct gpmi_nand_data *this, dma_addr_t payload,
- dma_addr_t auxiliary)
-{
- struct bch_geometry *geo = &this->bch_geometry;
- uint32_t command_mode;
- uint32_t address;
- uint32_t ecc_command;
- uint32_t buffer_mask;
- struct dma_async_tx_descriptor *desc;
- struct dma_chan *channel = get_dma_chan(this);
- int chip = this->current_chip;
- u32 pio[6];
-
- /* A DMA descriptor that does an ECC page read. */
- command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
- address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
- ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
- buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
- BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
-
- pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
- | BM_GPMI_CTRL0_WORD_LENGTH
- | BF_GPMI_CTRL0_CS(chip, this)
- | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
- | BF_GPMI_CTRL0_ADDRESS(address)
- | BF_GPMI_CTRL0_XFER_COUNT(0);
- pio[1] = 0;
- pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
- | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
- | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
- pio[3] = geo->page_size;
- pio[4] = payload;
- pio[5] = auxiliary;
-
- desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio),
- DMA_TRANS_NONE,
- MXS_DMA_CTRL_WAIT4END);
- if (!desc)
- return -EINVAL;
-
- return start_dma_with_bch_irq(this, desc);
-}
-
-static int gpmi_read_page(struct gpmi_nand_data *this, dma_addr_t payload,
- dma_addr_t auxiliary)
-{
- struct bch_geometry *geo = &this->bch_geometry;
- uint32_t command_mode;
- uint32_t address;
- uint32_t ecc_command;
- uint32_t buffer_mask;
- struct dma_async_tx_descriptor *desc;
- struct dma_chan *channel = get_dma_chan(this);
- int chip = this->current_chip;
- u32 pio[6];
-
- /* [1] Wait for the chip to report ready. */
- command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
- address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
-
- pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
- | BM_GPMI_CTRL0_WORD_LENGTH
- | BF_GPMI_CTRL0_CS(chip, this)
- | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
- | BF_GPMI_CTRL0_ADDRESS(address)
- | BF_GPMI_CTRL0_XFER_COUNT(0);
- pio[1] = 0;
- desc = mxs_dmaengine_prep_pio(channel, pio, 2, DMA_TRANS_NONE, 0);
- if (!desc)
- return -EINVAL;
-
- /* [2] Enable the BCH block and read. */
- command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
- address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
- ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
- buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
- | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
-
- pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
- | BM_GPMI_CTRL0_WORD_LENGTH
- | BF_GPMI_CTRL0_CS(chip, this)
- | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
- | BF_GPMI_CTRL0_ADDRESS(address)
- | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
-
- pio[1] = 0;
- pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
- | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
- | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
- pio[3] = geo->page_size;
- pio[4] = payload;
- pio[5] = auxiliary;
- desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio),
- DMA_TRANS_NONE,
- MXS_DMA_CTRL_WAIT4END);
- if (!desc)
- return -EINVAL;
-
- /* [3] Disable the BCH block */
- command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
- address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
-
- pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
- | BM_GPMI_CTRL0_WORD_LENGTH
- | BF_GPMI_CTRL0_CS(chip, this)
- | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
- | BF_GPMI_CTRL0_ADDRESS(address)
- | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
- pio[1] = 0;
- pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */
- desc = mxs_dmaengine_prep_pio(channel, pio, 3, DMA_TRANS_NONE,
- MXS_DMA_CTRL_WAIT4END);
- if (!desc)
- return -EINVAL;
-
- /* [4] submit the DMA */
- return start_dma_with_bch_irq(this, desc);
-}
-
/**
* gpmi_copy_bits - copy bits from one memory region to another
* @dst: destination buffer
@@ -1568,67 +1227,20 @@ static void release_resources(struct gpmi_nand_data *this)
release_dma_channels(this);
}
-static int send_page_prepare(struct gpmi_nand_data *this,
- const void *source, unsigned length,
- void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
- const void **use_virt, dma_addr_t *use_phys)
-{
- struct device *dev = this->dev;
-
- if (virt_addr_valid(source)) {
- dma_addr_t source_phys;
-
- source_phys = dma_map_single(dev, (void *)source, length,
- DMA_TO_DEVICE);
- if (dma_mapping_error(dev, source_phys)) {
- if (alt_size < length) {
- dev_err(dev, "Alternate buffer is too small\n");
- return -ENOMEM;
- }
- goto map_failed;
- }
- *use_virt = source;
- *use_phys = source_phys;
- return 0;
- }
-map_failed:
- /*
- * Copy the content of the source buffer into the alternate
- * buffer and set up the return values accordingly.
- */
- memcpy(alt_virt, source, length);
-
- *use_virt = alt_virt;
- *use_phys = alt_phys;
- return 0;
-}
-
-static void send_page_end(struct gpmi_nand_data *this,
- const void *source, unsigned length,
- void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
- const void *used_virt, dma_addr_t used_phys)
-{
- struct device *dev = this->dev;
- if (used_virt == source)
- dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE);
-}
-
static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
{
struct device *dev = this->dev;
+ struct bch_geometry *geo = &this->bch_geometry;
- if (this->payload_virt && virt_addr_valid(this->payload_virt))
- dma_free_coherent(dev, this->page_buffer_size,
- this->payload_virt,
- this->payload_phys);
- kfree(this->cmd_buffer);
+ if (this->auxiliary_virt && virt_addr_valid(this->auxiliary_virt))
+ dma_free_coherent(dev, geo->auxiliary_size,
+ this->auxiliary_virt,
+ this->auxiliary_phys);
kfree(this->data_buffer_dma);
kfree(this->raw_buffer);
- this->cmd_buffer = NULL;
this->data_buffer_dma = NULL;
this->raw_buffer = NULL;
- this->page_buffer_size = 0;
}
/* Allocate the DMA buffers */
@@ -1638,11 +1250,6 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
struct device *dev = this->dev;
struct mtd_info *mtd = nand_to_mtd(&this->nand);
- /* [1] Allocate a command buffer. PAGE_SIZE is enough. */
- this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL);
- if (this->cmd_buffer == NULL)
- goto error_alloc;
-
/*
* [2] Allocate a read/write data buffer.
* The gpmi_alloc_dma_buffer can be called twice.
@@ -1656,27 +1263,15 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
if (this->data_buffer_dma == NULL)
goto error_alloc;
- /*
- * [3] Allocate the page buffer.
- *
- * Both the payload buffer and the auxiliary buffer must appear on
- * 32-bit boundaries. We presume the size of the payload buffer is a
- * power of two and is much larger than four, which guarantees the
- * auxiliary buffer will appear on a 32-bit boundary.
- */
- this->page_buffer_size = geo->payload_size + geo->auxiliary_size;
- this->payload_virt = dma_alloc_coherent(dev, this->page_buffer_size,
- &this->payload_phys, GFP_DMA);
- if (!this->payload_virt)
+ this->auxiliary_virt = dma_alloc_coherent(dev, geo->auxiliary_size,
+ &this->auxiliary_phys, GFP_DMA);
+ if (!this->auxiliary_virt)
goto error_alloc;
- this->raw_buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
+ this->raw_buffer = kzalloc((mtd->writesize ?: PAGE_SIZE) + mtd->oobsize, GFP_KERNEL);
if (!this->raw_buffer)
goto error_alloc;
- /* Slice up the page buffer. */
- this->auxiliary_virt = this->payload_virt + geo->payload_size;
- this->auxiliary_phys = this->payload_phys + geo->payload_size;
return 0;
error_alloc:
@@ -1684,105 +1279,6 @@ error_alloc:
return -ENOMEM;
}
-static void gpmi_cmd_ctrl(struct nand_chip *chip, int data, unsigned int ctrl)
-{
- struct gpmi_nand_data *this = nand_get_controller_data(chip);
- int ret;
-
- /*
- * Every operation begins with a command byte and a series of zero or
- * more address bytes. These are distinguished by either the Address
- * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
- * asserted. When MTD is ready to execute the command, it will deassert
- * both latch enables.
- *
- * Rather than run a separate DMA operation for every single byte, we
- * queue them up and run a single DMA operation for the entire series
- * of command and data bytes. NAND_CMD_NONE means the END of the queue.
- */
- if ((ctrl & (NAND_ALE | NAND_CLE))) {
- if (data != NAND_CMD_NONE)
- this->cmd_buffer[this->command_length++] = data;
- return;
- }
-
- if (!this->command_length)
- return;
-
- ret = gpmi_send_command(this);
- if (ret)
- dev_err(this->dev, "Chip: %u, Error %d\n",
- this->current_chip, ret);
-
- this->command_length = 0;
-}
-
-static int gpmi_dev_ready(struct nand_chip *chip)
-{
- struct gpmi_nand_data *this = nand_get_controller_data(chip);
-
- return gpmi_is_ready(this, this->current_chip);
-}
-
-static void gpmi_select_chip(struct nand_chip *chip, int chipnr)
-{
- struct gpmi_nand_data *this = nand_get_controller_data(chip);
- int ret;
-
- /*
- * For power consumption matters, disable/enable the clock each time a
- * die is selected/unselected.
- */
- if (this->current_chip < 0 && chipnr >= 0) {
- ret = pm_runtime_get_sync(this->dev);
- if (ret < 0)
- dev_err(this->dev, "Failed to enable the clock\n");
- } else if (this->current_chip >= 0 && chipnr < 0) {
- pm_runtime_mark_last_busy(this->dev);
- pm_runtime_put_autosuspend(this->dev);
- }
-
- /*
- * This driver currently supports only one NAND chip. Plus, dies share
- * the same configuration. So once timings have been applied on the
- * controller side, they will not change anymore. When the time will
- * come, the check on must_apply_timings will have to be dropped.
- */
- if (chipnr >= 0 && this->hw.must_apply_timings) {
- this->hw.must_apply_timings = false;
- gpmi_nfc_apply_timings(this);
- }
-
- this->current_chip = chipnr;
-}
-
-static void gpmi_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
-{
- struct gpmi_nand_data *this = nand_get_controller_data(chip);
-
- dev_dbg(this->dev, "len is %d\n", len);
-
- gpmi_read_data(this, buf, len);
-}
-
-static void gpmi_write_buf(struct nand_chip *chip, const uint8_t *buf, int len)
-{
- struct gpmi_nand_data *this = nand_get_controller_data(chip);
-
- dev_dbg(this->dev, "len is %d\n", len);
-
- gpmi_send_data(this, buf, len);
-}
-
-static uint8_t gpmi_read_byte(struct nand_chip *chip)
-{
- struct gpmi_nand_data *this = nand_get_controller_data(chip);
- uint8_t *buf = this->data_buffer_dma;
-
- gpmi_read_buf(chip, buf, 1);
- return buf[0];
-}
-
/*
* Handles block mark swapping.
* It can be called in swapping the block mark, or swapping it back,
@@ -1831,50 +1327,20 @@ static void block_mark_swapping(struct gpmi_nand_data *this,
p[1] = (p[1] & mask) | (from_oob >> (8 - bit));
}
-static int gpmi_ecc_read_page_data(struct nand_chip *chip, uint8_t *buf)
+static int gpmi_count_bitflips(struct nand_chip *chip, void *buf, int first,
+ int last, int meta)
{
struct gpmi_nand_data *this = nand_get_controller_data(chip);
struct bch_geometry *nfc_geo = &this->bch_geometry;
struct mtd_info *mtd = nand_to_mtd(chip);
- dma_addr_t payload_phys;
- unsigned int i;
+ int i;
unsigned char *status;
- unsigned int max_bitflips = 0;
- int ret;
- bool direct = false;
-
- payload_phys = this->payload_phys;
-
- if (virt_addr_valid(buf)) {
- dma_addr_t dest_phys;
-
- dest_phys = dma_map_single(this->dev, buf, nfc_geo->payload_size,
- DMA_FROM_DEVICE);
- if (!dma_mapping_error(this->dev, dest_phys)) {
- payload_phys = dest_phys;
- direct = true;
- }
- }
-
- /* go! */
- ret = gpmi_read_page(this, payload_phys, this->auxiliary_phys);
-
- if (direct)
- dma_unmap_single(this->dev, payload_phys, nfc_geo->payload_size,
- DMA_FROM_DEVICE);
-
- if (ret) {
- dev_err(this->dev, "Error in ECC-based read: %d\n", ret);
- return ret;
- }
+ unsigned int max_bitflips = 0;
/* Loop over status bytes, accumulating ECC status. */
- status = this->auxiliary_virt + nfc_geo->auxiliary_status_offset;
+ status = this->auxiliary_virt + ALIGN(meta, 4);
- if (!direct)
- memcpy(buf, this->payload_virt, nfc_geo->payload_size);
-
- for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+ for (i = first; i < last; i++, status++) {
if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
continue;
@@ -1954,25 +1420,53 @@ static int gpmi_ecc_read_page_data(struct nand_chip *chip, uint8_t *buf)
max_bitflips = max_t(unsigned int, max_bitflips, *status);
}
- /* handle the block mark swapping */
- block_mark_swapping(this, buf, this->auxiliary_virt);
-
return max_bitflips;
}
+static void gpmi_bch_layout_std(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ unsigned int ecc_strength = geo->ecc_strength >> 1;
+ unsigned int gf_len = geo->gf_len;
+ unsigned int block_size = block_size = geo->ecc_chunk_size;
+
+ this->bch_flashlayout0 =
+ BF_BCH_FLASH0LAYOUT0_NBLOCKS(geo->ecc_chunk_count - 1) |
+ BF_BCH_FLASH0LAYOUT0_META_SIZE(geo->metadata_size) |
+ BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) |
+ BF_BCH_FLASH0LAYOUT0_GF(gf_len, this) |
+ BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this);
+
+ this->bch_flashlayout1 =
+ BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(geo->page_size) |
+ BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) |
+ BF_BCH_FLASH0LAYOUT1_GF(gf_len, this) |
+ BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this);
+}
+
static int gpmi_ecc_read_page(struct nand_chip *chip, uint8_t *buf,
int oob_required, int page)
{
struct gpmi_nand_data *this = nand_get_controller_data(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct bch_geometry *geo = &this->bch_geometry;
+ unsigned int max_bitflips;
int ret;
- nand_read_page_op(chip, page, 0, NULL, 0);
+ gpmi_bch_layout_std(this);
+ this->bch = true;
- ret = gpmi_ecc_read_page_data(chip, buf);
- if (ret < 0)
+ ret = nand_read_page_op(chip, page, 0, buf, geo->page_size);
+ if (ret)
return ret;
+ max_bitflips = gpmi_count_bitflips(chip, buf, 0,
+ geo->ecc_chunk_count,
+ geo->auxiliary_status_offset);
+
+ /* handle the block mark swapping */
+ block_mark_swapping(this, buf, this->auxiliary_virt);
+
if (oob_required) {
/*
* It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
@@ -1988,7 +1482,7 @@ static int gpmi_ecc_read_page(struct nand_chip *chip, uint8_t *buf,
chip->oob_poi[0] = ((uint8_t *)this->auxiliary_virt)[0];
}
- return ret;
+ return max_bitflips;
}
/* Fake a virtual small page for the subpage read */
@@ -1996,17 +1490,15 @@ static int gpmi_ecc_read_subpage(struct nand_chip *chip, uint32_t offs,
uint32_t len, uint8_t *buf, int page)
{
struct gpmi_nand_data *this = nand_get_controller_data(chip);
- void __iomem *bch_regs = this->resources.bch_regs;
- struct bch_geometry old_geo = this->bch_geometry;
struct bch_geometry *geo = &this->bch_geometry;
int size = chip->ecc.size; /* ECC chunk size */
int meta, n, page_size;
- u32 r1_old, r2_old, r1_new, r2_new;
unsigned int max_bitflips;
+ unsigned int ecc_strength;
int first, last, marker_pos;
int ecc_parity_size;
int col = 0;
- int old_swap_block_mark = this->swap_block_mark;
+ int ret;
/* The size of ECC parity */
ecc_parity_size = geo->gf_len * geo->ecc_strength / 8;
@@ -2039,43 +1531,33 @@ static int gpmi_ecc_read_subpage(struct nand_chip *chip, uint32_t offs,
buf = buf + first * size;
}
- nand_read_page_op(chip, page, col, NULL, 0);
-
- /* Save the old environment */
- r1_old = r1_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT0);
- r2_old = r2_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT1);
+ ecc_parity_size = geo->gf_len * geo->ecc_strength / 8;
- /* change the BCH registers and bch_geometry{} */
n = last - first + 1;
page_size = meta + (size + ecc_parity_size) * n;
+ ecc_strength = geo->ecc_strength >> 1;
+
+ this->bch_flashlayout0 = BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1) |
+ BF_BCH_FLASH0LAYOUT0_META_SIZE(meta) |
+ BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) |
+ BF_BCH_FLASH0LAYOUT0_GF(geo->gf_len, this) |
+ BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(geo->ecc_chunk_size, this);
- r1_new &= ~(BM_BCH_FLASH0LAYOUT0_NBLOCKS |
- BM_BCH_FLASH0LAYOUT0_META_SIZE);
- r1_new |= BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1)
- | BF_BCH_FLASH0LAYOUT0_META_SIZE(meta);
- writel(r1_new, bch_regs + HW_BCH_FLASH0LAYOUT0);
+ this->bch_flashlayout1 = BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size) |
+ BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) |
+ BF_BCH_FLASH0LAYOUT1_GF(geo->gf_len, this) |
+ BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(geo->ecc_chunk_size, this);
- r2_new &= ~BM_BCH_FLASH0LAYOUT1_PAGE_SIZE;
- r2_new |= BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size);
- writel(r2_new, bch_regs + HW_BCH_FLASH0LAYOUT1);
+ this->bch = true;
- geo->ecc_chunk_count = n;
- geo->payload_size = n * size;
- geo->page_size = page_size;
- geo->auxiliary_status_offset = ALIGN(meta, 4);
+ ret = nand_read_page_op(chip, page, col, buf, page_size);
+ if (ret)
+ return ret;
dev_dbg(this->dev, "page:%d(%d:%d)%d, chunk:(%d:%d), BCH PG size:%d\n",
page, offs, len, col, first, n, page_size);
- /* Read the subpage now */
- this->swap_block_mark = false;
- max_bitflips = gpmi_ecc_read_page_data(chip, buf);
-
- /* Restore */
- writel(r1_old, bch_regs + HW_BCH_FLASH0LAYOUT0);
- writel(r2_old, bch_regs + HW_BCH_FLASH0LAYOUT1);
- this->bch_geometry = old_geo;
- this->swap_block_mark = old_swap_block_mark;
+ max_bitflips = gpmi_count_bitflips(chip, buf, first, last, meta);
return max_bitflips;
}
@@ -2086,81 +1568,29 @@ static int gpmi_ecc_write_page(struct nand_chip *chip, const uint8_t *buf,
struct mtd_info *mtd = nand_to_mtd(chip);
struct gpmi_nand_data *this = nand_get_controller_data(chip);
struct bch_geometry *nfc_geo = &this->bch_geometry;
- const void *payload_virt;
- dma_addr_t payload_phys;
- const void *auxiliary_virt;
- dma_addr_t auxiliary_phys;
- int ret;
+ int ret;
dev_dbg(this->dev, "ecc write page.\n");
- nand_prog_page_begin_op(chip, page, 0, NULL, 0);
+ gpmi_bch_layout_std(this);
+ this->bch = true;
+
+ memcpy(this->auxiliary_virt, chip->oob_poi, nfc_geo->auxiliary_size);
if (this->swap_block_mark) {
/*
- * If control arrives here, we're doing block mark swapping.
- * Since we can't modify the caller's buffers, we must copy them
- * into our own.
- */
- memcpy(this->payload_virt, buf, mtd->writesize);
- payload_virt = this->payload_virt;
- payload_phys = this->payload_phys;
-
- memcpy(this->auxiliary_virt, chip->oob_poi,
- nfc_geo->auxiliary_size);
- auxiliary_virt = this->auxiliary_virt;
- auxiliary_phys = this->auxiliary_phys;
-
- /* Handle block mark swapping. */
- block_mark_swapping(this,
- (void *)payload_virt, (void *)auxiliary_virt);
- } else {
- /*
- * If control arrives here, we're not doing block mark swapping,
- * so we can to try and use the caller's buffers.
+ * When doing bad block marker swapping we must always copy the
+ * input buffer as we can't modify the const buffer.
*/
- ret = send_page_prepare(this,
- buf, mtd->writesize,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- &payload_virt, &payload_phys);
- if (ret) {
- dev_err(this->dev, "Inadequate payload DMA buffer\n");
- return 0;
- }
-
- ret = send_page_prepare(this,
- chip->oob_poi, mtd->oobsize,
- this->auxiliary_virt, this->auxiliary_phys,
- nfc_geo->auxiliary_size,
- &auxiliary_virt, &auxiliary_phys);
- if (ret) {
- dev_err(this->dev, "Inadequate auxiliary DMA buffer\n");
- goto exit_auxiliary;
- }
+ memcpy(this->data_buffer_dma, buf, mtd->writesize);
+ buf = this->data_buffer_dma;
+ block_mark_swapping(this, this->data_buffer_dma,
+ this->auxiliary_virt);
}
- /* Ask the NFC. */
- ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
- if (ret)
- dev_err(this->dev, "Error in ECC-based write: %d\n", ret);
-
- if (!this->swap_block_mark) {
- send_page_end(this, chip->oob_poi, mtd->oobsize,
- this->auxiliary_virt, this->auxiliary_phys,
- nfc_geo->auxiliary_size,
- auxiliary_virt, auxiliary_phys);
-exit_auxiliary:
- send_page_end(this, buf, mtd->writesize,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
- }
+ ret = nand_prog_page_op(chip, page, 0, buf, nfc_geo->page_size);
- if (ret)
- return ret;
-
- return nand_prog_page_end_op(chip);
+ return ret;
}
/*
@@ -2229,7 +1659,6 @@ static int gpmi_ecc_read_oob(struct nand_chip *chip, int page)
struct gpmi_nand_data *this = nand_get_controller_data(chip);
int ret;
- dev_dbg(this->dev, "page number is %d\n", page);
/* clear the OOB buffer */
memset(chip->oob_poi, ~0, mtd->oobsize);
@@ -2297,9 +1726,12 @@ static int gpmi_ecc_read_page_raw(struct nand_chip *chip, uint8_t *buf,
size_t oob_byte_off;
uint8_t *oob = chip->oob_poi;
int step;
+ int ret;
- nand_read_page_op(chip, page, 0, tmp_buf,
- mtd->writesize + mtd->oobsize);
+ ret = nand_read_page_op(chip, page, 0, tmp_buf,
+ mtd->writesize + mtd->oobsize);
+ if (ret)
+ return ret;
/*
* If required, swap the bad block marker and the data stored in the
@@ -2789,9 +2221,330 @@ static int gpmi_nand_attach_chip(struct nand_chip *chip)
return 0;
}
+static struct gpmi_transfer *get_next_transfer(struct gpmi_nand_data *this)
+{
+ struct gpmi_transfer *transfer = &this->transfers[this->ntransfers];
+
+ this->ntransfers++;
+
+ if (this->ntransfers == GPMI_MAX_TRANSFERS)
+ return NULL;
+
+ return transfer;
+}
+
+static struct dma_async_tx_descriptor *gpmi_chain_command(
+ struct gpmi_nand_data *this, u8 cmd, const u8 *addr, int naddr)
+{
+ struct dma_chan *channel = get_dma_chan(this);
+ struct dma_async_tx_descriptor *desc;
+ struct gpmi_transfer *transfer;
+ int chip = this->nand.cur_cs;
+ u32 pio[3];
+
+ /* [1] send out the PIO words */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+ | BM_GPMI_CTRL0_ADDRESS_INCREMENT
+ | BF_GPMI_CTRL0_XFER_COUNT(naddr + 1);
+ pio[1] = 0;
+ pio[2] = 0;
+ desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio),
+ DMA_TRANS_NONE, 0);
+ if (!desc)
+ return NULL;
+
+ transfer = get_next_transfer(this);
+ if (!transfer)
+ return NULL;
+
+ transfer->cmdbuf[0] = cmd;
+ if (naddr)
+ memcpy(&transfer->cmdbuf[1], addr, naddr);
+
+ sg_init_one(&transfer->sgl, transfer->cmdbuf, naddr + 1);
+ dma_map_sg(this->dev, &transfer->sgl, 1, DMA_TO_DEVICE);
+
+ transfer->direction = DMA_TO_DEVICE;
+
+ desc = dmaengine_prep_slave_sg(channel, &transfer->sgl, 1, DMA_MEM_TO_DEV,
+ MXS_DMA_CTRL_WAIT4END);
+ return desc;
+}
+
+static struct dma_async_tx_descriptor *gpmi_chain_wait_ready(
+ struct gpmi_nand_data *this)
+{
+ struct dma_chan *channel = get_dma_chan(this);
+ u32 pio[2];
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(this->nand.cur_cs, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+
+ return mxs_dmaengine_prep_pio(channel, pio, 2, DMA_TRANS_NONE,
+ MXS_DMA_CTRL_WAIT4END | MXS_DMA_CTRL_WAIT4RDY);
+}
+
+static struct dma_async_tx_descriptor *gpmi_chain_data_read(
+ struct gpmi_nand_data *this, void *buf, int raw_len, bool *direct)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ struct gpmi_transfer *transfer;
+ u32 pio[6] = {};
+
+ transfer = get_next_transfer(this);
+ if (!transfer)
+ return NULL;
+
+ transfer->direction = DMA_FROM_DEVICE;
+
+ *direct = prepare_data_dma(this, buf, raw_len, &transfer->sgl,
+ DMA_FROM_DEVICE);
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(this->nand.cur_cs, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+ | BF_GPMI_CTRL0_XFER_COUNT(raw_len);
+
+ if (this->bch) {
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+ | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY);
+ pio[3] = raw_len;
+ pio[4] = transfer->sgl.dma_address;
+ pio[5] = this->auxiliary_phys;
+ }
+
+ desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio),
+ DMA_TRANS_NONE, 0);
+ if (!desc)
+ return NULL;
+
+ if (!this->bch)
+ desc = dmaengine_prep_slave_sg(channel, &transfer->sgl, 1,
+ DMA_DEV_TO_MEM,
+ MXS_DMA_CTRL_WAIT4END);
+
+ return desc;
+}
+
+static struct dma_async_tx_descriptor *gpmi_chain_data_write(
+ struct gpmi_nand_data *this, const void *buf, int raw_len)
+{
+ struct dma_chan *channel = get_dma_chan(this);
+ struct dma_async_tx_descriptor *desc;
+ struct gpmi_transfer *transfer;
+ u32 pio[6] = {};
+
+ transfer = get_next_transfer(this);
+ if (!transfer)
+ return NULL;
+
+ transfer->direction = DMA_TO_DEVICE;
+
+ prepare_data_dma(this, buf, raw_len, &transfer->sgl, DMA_TO_DEVICE);
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(this->nand.cur_cs, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+ | BF_GPMI_CTRL0_XFER_COUNT(raw_len);
+
+ if (this->bch) {
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+ BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY);
+ pio[3] = raw_len;
+ pio[4] = transfer->sgl.dma_address;
+ pio[5] = this->auxiliary_phys;
+ }
+
+ desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio),
+ DMA_TRANS_NONE,
+ (this->bch ? MXS_DMA_CTRL_WAIT4END : 0));
+ if (!desc)
+ return NULL;
+
+ if (!this->bch)
+ desc = dmaengine_prep_slave_sg(channel, &transfer->sgl, 1,
+ DMA_MEM_TO_DEV,
+ MXS_DMA_CTRL_WAIT4END);
+
+ return desc;
+}
+
+static int gpmi_nfc_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op,
+ bool check_only)
+{
+ const struct nand_op_instr *instr;
+ struct gpmi_nand_data *this = nand_get_controller_data(chip);
+ struct dma_async_tx_descriptor *desc = NULL;
+ int i, ret, buf_len = 0, nbufs = 0;
+ u8 cmd = 0;
+ void *buf_read = NULL;
+ const void *buf_write = NULL;
+ bool direct = false;
+ struct completion *completion;
+ unsigned long to;
+
+ this->ntransfers = 0;
+ for (i = 0; i < GPMI_MAX_TRANSFERS; i++)
+ this->transfers[i].direction = DMA_NONE;
+
+ ret = pm_runtime_get_sync(this->dev);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * This driver currently supports only one NAND chip. Plus, dies share
+ * the same configuration. So once timings have been applied on the
+ * controller side, they will not change anymore. When the time will
+ * come, the check on must_apply_timings will have to be dropped.
+ */
+ if (this->hw.must_apply_timings) {
+ this->hw.must_apply_timings = false;
+ gpmi_nfc_apply_timings(this);
+ }
+
+ dev_dbg(this->dev, "%s: %d instructions\n", __func__, op->ninstrs);
+
+ for (i = 0; i < op->ninstrs; i++) {
+ instr = &op->instrs[i];
+
+ nand_op_trace(" ", instr);
+
+ switch (instr->type) {
+ case NAND_OP_WAITRDY_INSTR:
+ desc = gpmi_chain_wait_ready(this);
+ break;
+ case NAND_OP_CMD_INSTR:
+ cmd = instr->ctx.cmd.opcode;
+
+ /*
+ * When this command has an address cycle chain it
+ * together with the address cycle
+ */
+ if (i + 1 != op->ninstrs &&
+ op->instrs[i + 1].type == NAND_OP_ADDR_INSTR)
+ continue;
+
+ desc = gpmi_chain_command(this, cmd, NULL, 0);
+
+ break;
+ case NAND_OP_ADDR_INSTR:
+ desc = gpmi_chain_command(this, cmd, instr->ctx.addr.addrs,
+ instr->ctx.addr.naddrs);
+ break;
+ case NAND_OP_DATA_OUT_INSTR:
+ buf_write = instr->ctx.data.buf.out;
+ buf_len = instr->ctx.data.len;
+ nbufs++;
+
+ desc = gpmi_chain_data_write(this, buf_write, buf_len);
+
+ break;
+ case NAND_OP_DATA_IN_INSTR:
+ if (!instr->ctx.data.len)
+ break;
+ buf_read = instr->ctx.data.buf.in;
+ buf_len = instr->ctx.data.len;
+ nbufs++;
+
+ desc = gpmi_chain_data_read(this, buf_read, buf_len,
+ &direct);
+ break;
+ }
+
+ if (!desc) {
+ ret = -ENXIO;
+ goto unmap;
+ }
+ }
+
+ dev_dbg(this->dev, "%s setup done\n", __func__);
+
+ if (nbufs > 1) {
+ dev_err(this->dev, "Multiple data instructions not supported\n");
+ ret = -EINVAL;
+ goto unmap;
+ }
+
+ if (this->bch) {
+ writel(this->bch_flashlayout0,
+ this->resources.bch_regs + HW_BCH_FLASH0LAYOUT0);
+ writel(this->bch_flashlayout1,
+ this->resources.bch_regs + HW_BCH_FLASH0LAYOUT1);
+ }
+
+ if (this->bch && buf_read) {
+ writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+ this->resources.bch_regs + HW_BCH_CTRL_SET);
+ completion = &this->bch_done;
+ } else {
+ desc->callback = dma_irq_callback;
+ desc->callback_param = this;
+ completion = &this->dma_done;
+ }
+
+ init_completion(completion);
+
+ dmaengine_submit(desc);
+ dma_async_issue_pending(get_dma_chan(this));
+
+ to = wait_for_completion_timeout(completion, msecs_to_jiffies(1000));
+ if (!to) {
+ dev_err(this->dev, "DMA timeout, last DMA\n");
+ gpmi_dump_info(this);
+ ret = -ETIMEDOUT;
+ goto unmap;
+ }
+
+ writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+ this->resources.bch_regs + HW_BCH_CTRL_CLR);
+ gpmi_clear_bch(this);
+
+ ret = 0;
+
+unmap:
+ for (i = 0; i < this->ntransfers; i++) {
+ struct gpmi_transfer *transfer = &this->transfers[i];
+
+ if (transfer->direction != DMA_NONE)
+ dma_unmap_sg(this->dev, &transfer->sgl, 1,
+ transfer->direction);
+ }
+
+ if (!ret && buf_read && !direct)
+ memcpy(buf_read, this->data_buffer_dma,
+ gpmi_raw_len_to_len(this, buf_len));
+
+ this->bch = false;
+
+ pm_runtime_mark_last_busy(this->dev);
+ pm_runtime_put_autosuspend(this->dev);
+
+ return ret;
+}
+
static const struct nand_controller_ops gpmi_nand_controller_ops = {
.attach_chip = gpmi_nand_attach_chip,
.setup_data_interface = gpmi_setup_data_interface,
+ .exec_op = gpmi_nfc_exec_op,
};
static int gpmi_nand_init(struct gpmi_nand_data *this)
@@ -2800,9 +2553,6 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
- /* init current chip */
- this->current_chip = -1;
-
/* init the MTD data structures */
mtd->name = "gpmi-nand";
mtd->dev.parent = this->dev;
@@ -2810,14 +2560,8 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
/* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
nand_set_controller_data(chip, this);
nand_set_flash_node(chip, this->pdev->dev.of_node);
- chip->legacy.select_chip = gpmi_select_chip;
- chip->legacy.cmd_ctrl = gpmi_cmd_ctrl;
- chip->legacy.dev_ready = gpmi_dev_ready;
- chip->legacy.read_byte = gpmi_read_byte;
- chip->legacy.read_buf = gpmi_read_buf;
- chip->legacy.write_buf = gpmi_write_buf;
- chip->badblock_pattern = &gpmi_bbt_descr;
chip->legacy.block_markbad = gpmi_block_markbad;
+ chip->badblock_pattern = &gpmi_bbt_descr;
chip->options |= NAND_NO_SUBPAGE_WRITE;
/* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
@@ -2833,7 +2577,10 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
if (ret)
goto err_out;
- chip->legacy.dummy_controller.ops = &gpmi_nand_controller_ops;
+ nand_controller_init(&this->base);
+ this->base.ops = &gpmi_nand_controller_ops;
+ chip->controller = &this->base;
+
ret = nand_scan(chip, GPMI_IS_MX6(this) ? 2 : 1);
if (ret)
goto err_out;
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
index 51a070da84ed..fdc5ed7de083 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
@@ -103,6 +103,14 @@ struct gpmi_nfc_hardware_timing {
u32 ctrl1n;
};
+#define GPMI_MAX_TRANSFERS 8
+
+struct gpmi_transfer {
+ u8 cmdbuf[8];
+ struct scatterlist sgl;
+ enum dma_data_direction direction;
+};
+
struct gpmi_nand_data {
/* Devdata */
const struct gpmi_devdata *devdata;
@@ -126,23 +134,18 @@ struct gpmi_nand_data {
struct boot_rom_geometry rom_geometry;
/* MTD / NAND */
+ struct nand_controller base;
struct nand_chip nand;
- /* General-use Variables */
- int current_chip;
- unsigned int command_length;
+ struct gpmi_transfer transfers[GPMI_MAX_TRANSFERS];
+ int ntransfers;
- struct scatterlist cmd_sgl;
- char *cmd_buffer;
+ bool bch;
+ uint32_t bch_flashlayout0;
+ uint32_t bch_flashlayout1;
- struct scatterlist data_sgl;
char *data_buffer_dma;
- unsigned int page_buffer_size;
-
- void *payload_virt;
- dma_addr_t payload_phys;
-
void *auxiliary_virt;
dma_addr_t auxiliary_phys;