summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
-rw-r--r--drivers/net/e1000e/netdev.c26
1 files changed, 23 insertions, 3 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index abd492b7336d..122539a0e1fe 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -345,7 +345,6 @@ no_buffers:
/**
* e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
* @adapter: address of board private structure
- * @rx_ring: pointer to receive ring structure
* @cleaned_count: number of buffers to allocate this pass
**/
@@ -499,6 +498,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
goto next_desc;
}
+ /* adjust length to remove Ethernet CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ length -= 4;
+
total_rx_bytes += length;
total_rx_packets++;
@@ -804,6 +807,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
pci_dma_sync_single_for_device(pdev, ps_page->dma,
PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ /* remove the CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ l1 -= 4;
+
skb_put(skb, l1);
goto copydone;
} /* if */
@@ -825,6 +832,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
skb->truesize += length;
}
+ /* strip the ethernet crc, problem is we're using pages now so
+ * this whole operation can get a little cpu intensive
+ */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ pskb_trim(skb, skb->len - 4);
+
copydone:
total_rx_bytes += skb->len;
total_rx_packets++;
@@ -2301,8 +2314,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
else
rctl |= E1000_RCTL_LPE;
- /* Enable hardware CRC frame stripping */
- rctl |= E1000_RCTL_SECRC;
+ /* Some systems expect that the CRC is included in SMBUS traffic. The
+ * hardware strips the CRC before sending to both SMBUS (BMC) and to
+ * host memory when this is enabled
+ */
+ if (adapter->flags2 & FLAG2_CRC_STRIPPING)
+ rctl |= E1000_RCTL_SECRC;
/* Setup buffer sizes */
rctl &= ~E1000_RCTL_SZ_4096;
@@ -4766,6 +4783,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->ei = ei;
adapter->pba = ei->pba;
adapter->flags = ei->flags;
+ adapter->flags2 = ei->flags2;
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
@@ -4970,6 +4988,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* reset the hardware with the new settings */
e1000e_reset(adapter);
@@ -5008,6 +5027,7 @@ err_hw_init:
err_sw_init:
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
+ e1000e_reset_interrupt_capability(adapter);
err_flashmap:
iounmap(adapter->hw.hw_addr);
err_ioremap: