summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/8390/xsurf100.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/8390/xsurf100.c')
-rw-r--r--drivers/net/ethernet/8390/xsurf100.c382
1 files changed, 382 insertions, 0 deletions
diff --git a/drivers/net/ethernet/8390/xsurf100.c b/drivers/net/ethernet/8390/xsurf100.c
new file mode 100644
index 000000000000..e2c963821ffe
--- /dev/null
+++ b/drivers/net/ethernet/8390/xsurf100.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/zorro.h>
+#include <net/ax88796.h>
+#include <asm/amigaints.h>
+
+#define ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100 \
+ ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x64, 0)
+
+#define XS100_IRQSTATUS_BASE 0x40
+#define XS100_8390_BASE 0x800
+
+/* Longword-access area. Translated to 2 16-bit access cycles by the
+ * X-Surf 100 FPGA
+ */
+#define XS100_8390_DATA32_BASE 0x8000
+#define XS100_8390_DATA32_SIZE 0x2000
+/* Sub-Areas for fast data register access; addresses relative to area begin */
+#define XS100_8390_DATA_READ32_BASE 0x0880
+#define XS100_8390_DATA_WRITE32_BASE 0x0C80
+#define XS100_8390_DATA_AREA_SIZE 0x80
+
+#define __NS8390_init ax_NS8390_init
+
+/* force unsigned long back to 'void __iomem *' */
+#define ax_convert_addr(_a) ((void __force __iomem *)(_a))
+
+#define ei_inb(_a) z_readb(ax_convert_addr(_a))
+#define ei_outb(_v, _a) z_writeb(_v, ax_convert_addr(_a))
+
+#define ei_inw(_a) z_readw(ax_convert_addr(_a))
+#define ei_outw(_v, _a) z_writew(_v, ax_convert_addr(_a))
+
+#define ei_inb_p(_a) ei_inb(_a)
+#define ei_outb_p(_v, _a) ei_outb(_v, _a)
+
+/* define EI_SHIFT() to take into account our register offsets */
+#define EI_SHIFT(x) (ei_local->reg_offset[(x)])
+
+/* Ensure we have our RCR base value */
+#define AX88796_PLATFORM
+
+static unsigned char version[] =
+ "ax88796.c: Copyright 2005,2007 Simtec Electronics\n";
+
+#include "lib8390.c"
+
+/* from ne.c */
+#define NE_CMD EI_SHIFT(0x00)
+#define NE_RESET EI_SHIFT(0x1f)
+#define NE_DATAPORT EI_SHIFT(0x10)
+
+struct xsurf100_ax_plat_data {
+ struct ax_plat_data ax;
+ void __iomem *base_regs;
+ void __iomem *data_area;
+};
+
+static int is_xsurf100_network_irq(struct platform_device *pdev)
+{
+ struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);
+
+ return (readw(xs100->base_regs + XS100_IRQSTATUS_BASE) & 0xaaaa) != 0;
+}
+
+/* These functions guarantee that the iomem is accessed with 32 bit
+ * cycles only. z_memcpy_fromio / z_memcpy_toio don't
+ */
+static void z_memcpy_fromio32(void *dst, const void __iomem *src, size_t bytes)
+{
+ while (bytes > 32) {
+ asm __volatile__
+ ("movem.l (%0)+,%%d0-%%d7\n"
+ "movem.l %%d0-%%d7,(%1)\n"
+ "adda.l #32,%1" : "=a"(src), "=a"(dst)
+ : "0"(src), "1"(dst) : "d0", "d1", "d2", "d3", "d4",
+ "d5", "d6", "d7", "memory");
+ bytes -= 32;
+ }
+ while (bytes) {
+ *(uint32_t *)dst = z_readl(src);
+ src += 4;
+ dst += 4;
+ bytes -= 4;
+ }
+}
+
+static void z_memcpy_toio32(void __iomem *dst, const void *src, size_t bytes)
+{
+ while (bytes) {
+ z_writel(*(const uint32_t *)src, dst);
+ src += 4;
+ dst += 4;
+ bytes -= 4;
+ }
+}
+
+static void xs100_write(struct net_device *dev, const void *src,
+ unsigned int count)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ struct platform_device *pdev = to_platform_device(dev->dev.parent);
+ struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);
+
+ /* copy whole blocks */
+ while (count > XS100_8390_DATA_AREA_SIZE) {
+ z_memcpy_toio32(xs100->data_area +
+ XS100_8390_DATA_WRITE32_BASE, src,
+ XS100_8390_DATA_AREA_SIZE);
+ src += XS100_8390_DATA_AREA_SIZE;
+ count -= XS100_8390_DATA_AREA_SIZE;
+ }
+ /* copy whole dwords */
+ z_memcpy_toio32(xs100->data_area + XS100_8390_DATA_WRITE32_BASE,
+ src, count & ~3);
+ src += count & ~3;
+ if (count & 2) {
+ ei_outw(*(uint16_t *)src, ei_local->mem + NE_DATAPORT);
+ src += 2;
+ }
+ if (count & 1)
+ ei_outb(*(uint8_t *)src, ei_local->mem + NE_DATAPORT);
+}
+
+static void xs100_read(struct net_device *dev, void *dst, unsigned int count)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ struct platform_device *pdev = to_platform_device(dev->dev.parent);
+ struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);
+
+ /* copy whole blocks */
+ while (count > XS100_8390_DATA_AREA_SIZE) {
+ z_memcpy_fromio32(dst, xs100->data_area +
+ XS100_8390_DATA_READ32_BASE,
+ XS100_8390_DATA_AREA_SIZE);
+ dst += XS100_8390_DATA_AREA_SIZE;
+ count -= XS100_8390_DATA_AREA_SIZE;
+ }
+ /* copy whole dwords */
+ z_memcpy_fromio32(dst, xs100->data_area + XS100_8390_DATA_READ32_BASE,
+ count & ~3);
+ dst += count & ~3;
+ if (count & 2) {
+ *(uint16_t *)dst = ei_inw(ei_local->mem + NE_DATAPORT);
+ dst += 2;
+ }
+ if (count & 1)
+ *(uint8_t *)dst = ei_inb(ei_local->mem + NE_DATAPORT);
+}
+
+/* Block input and output, similar to the Crynwr packet driver. If
+ * you are porting to a new ethercard, look at the packet driver
+ * source for hints. The NEx000 doesn't share the on-board packet
+ * memory -- you have to put the packet out through the "remote DMA"
+ * dataport using ei_outb.
+ */
+static void xs100_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *nic_base = ei_local->mem;
+ char *buf = skb->data;
+
+ if (ei_local->dmaing) {
+ netdev_err(dev,
+ "DMAing conflict in %s [DMAstat:%d][irqlock:%d]\n",
+ __func__,
+ ei_local->dmaing, ei_local->irqlock);
+ return;
+ }
+
+ ei_local->dmaing |= 0x01;
+
+ ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
+ ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
+ ei_outb(count >> 8, nic_base + EN0_RCNTHI);
+ ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
+ ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
+ ei_outb(E8390_RREAD + E8390_START, nic_base + NE_CMD);
+
+ xs100_read(dev, buf, count);
+
+ ei_local->dmaing &= ~1;
+}
+
+static void xs100_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, const int start_page)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *nic_base = ei_local->mem;
+ unsigned long dma_start;
+
+ /* Round the count up for word writes. Do we need to do this?
+ * What effect will an odd byte count have on the 8390? I
+ * should check someday.
+ */
+ if (ei_local->word16 && (count & 0x01))
+ count++;
+
+ /* This *shouldn't* happen. If it does, it's the last thing
+ * you'll see
+ */
+ if (ei_local->dmaing) {
+ netdev_err(dev,
+ "DMAing conflict in %s [DMAstat:%d][irqlock:%d]\n",
+ __func__,
+ ei_local->dmaing, ei_local->irqlock);
+ return;
+ }
+
+ ei_local->dmaing |= 0x01;
+ /* We should already be in page 0, but to be safe... */
+ ei_outb(E8390_PAGE0 + E8390_START + E8390_NODMA, nic_base + NE_CMD);
+
+ ei_outb(ENISR_RDC, nic_base + EN0_ISR);
+
+ /* Now the normal output. */
+ ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
+ ei_outb(count >> 8, nic_base + EN0_RCNTHI);
+ ei_outb(0x00, nic_base + EN0_RSARLO);
+ ei_outb(start_page, nic_base + EN0_RSARHI);
+
+ ei_outb(E8390_RWRITE + E8390_START, nic_base + NE_CMD);
+
+ xs100_write(dev, buf, count);
+
+ dma_start = jiffies;
+
+ while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
+ if (jiffies - dma_start > 2 * HZ / 100) { /* 20ms */
+ netdev_warn(dev, "timeout waiting for Tx RDC.\n");
+ ei_local->reset_8390(dev);
+ ax_NS8390_init(dev, 1);
+ break;
+ }
+ }
+
+ ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
+ ei_local->dmaing &= ~0x01;
+}
+
+static int xsurf100_probe(struct zorro_dev *zdev,
+ const struct zorro_device_id *ent)
+{
+ struct platform_device *pdev;
+ struct xsurf100_ax_plat_data ax88796_data;
+ struct resource res[2] = {
+ DEFINE_RES_NAMED(IRQ_AMIGA_PORTS, 1, NULL,
+ IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE),
+ DEFINE_RES_MEM(zdev->resource.start + XS100_8390_BASE,
+ 4 * 0x20)
+ };
+ int reg;
+ /* This table is referenced in the device structure, so it must
+ * outlive the scope of xsurf100_probe.
+ */
+ static u32 reg_offsets[32];
+ int ret = 0;
+
+ /* X-Surf 100 control and 32 bit ring buffer data access areas.
+ * These resources are not used by the ax88796 driver, so must
+ * be requested here and passed via platform data.
+ */
+
+ if (!request_mem_region(zdev->resource.start, 0x100, zdev->name)) {
+ dev_err(&zdev->dev, "cannot reserve X-Surf 100 control registers\n");
+ return -ENXIO;
+ }
+
+ if (!request_mem_region(zdev->resource.start +
+ XS100_8390_DATA32_BASE,
+ XS100_8390_DATA32_SIZE,
+ "X-Surf 100 32-bit data access")) {
+ dev_err(&zdev->dev, "cannot reserve 32-bit area\n");
+ ret = -ENXIO;
+ goto exit_req;
+ }
+
+ for (reg = 0; reg < 0x20; reg++)
+ reg_offsets[reg] = 4 * reg;
+
+ memset(&ax88796_data, 0, sizeof(ax88796_data));
+ ax88796_data.ax.flags = AXFLG_HAS_EEPROM;
+ ax88796_data.ax.wordlength = 2;
+ ax88796_data.ax.dcr_val = 0x48;
+ ax88796_data.ax.rcr_val = 0x40;
+ ax88796_data.ax.reg_offsets = reg_offsets;
+ ax88796_data.ax.check_irq = is_xsurf100_network_irq;
+ ax88796_data.base_regs = ioremap(zdev->resource.start, 0x100);
+
+ /* error handling for ioremap regs */
+ if (!ax88796_data.base_regs) {
+ dev_err(&zdev->dev, "Cannot ioremap area %pR (registers)\n",
+ &zdev->resource);
+
+ ret = -ENXIO;
+ goto exit_req2;
+ }
+
+ ax88796_data.data_area = ioremap(zdev->resource.start +
+ XS100_8390_DATA32_BASE, XS100_8390_DATA32_SIZE);
+
+ /* error handling for ioremap data */
+ if (!ax88796_data.data_area) {
+ dev_err(&zdev->dev,
+ "Cannot ioremap area %pR offset %x (32-bit access)\n",
+ &zdev->resource, XS100_8390_DATA32_BASE);
+
+ ret = -ENXIO;
+ goto exit_mem;
+ }
+
+ ax88796_data.ax.block_output = xs100_block_output;
+ ax88796_data.ax.block_input = xs100_block_input;
+
+ pdev = platform_device_register_resndata(&zdev->dev, "ax88796",
+ zdev->slotaddr, res, 2,
+ &ax88796_data,
+ sizeof(ax88796_data));
+
+ if (IS_ERR(pdev)) {
+ dev_err(&zdev->dev, "cannot register platform device\n");
+ ret = -ENXIO;
+ goto exit_mem2;
+ }
+
+ zorro_set_drvdata(zdev, pdev);
+
+ if (!ret)
+ return 0;
+
+ exit_mem2:
+ iounmap(ax88796_data.data_area);
+
+ exit_mem:
+ iounmap(ax88796_data.base_regs);
+
+ exit_req2:
+ release_mem_region(zdev->resource.start + XS100_8390_DATA32_BASE,
+ XS100_8390_DATA32_SIZE);
+
+ exit_req:
+ release_mem_region(zdev->resource.start, 0x100);
+
+ return ret;
+}
+
+static void xsurf100_remove(struct zorro_dev *zdev)
+{
+ struct platform_device *pdev = zorro_get_drvdata(zdev);
+ struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev);
+
+ platform_device_unregister(pdev);
+
+ iounmap(xs100->base_regs);
+ release_mem_region(zdev->resource.start, 0x100);
+ iounmap(xs100->data_area);
+ release_mem_region(zdev->resource.start + XS100_8390_DATA32_BASE,
+ XS100_8390_DATA32_SIZE);
+}
+
+static const struct zorro_device_id xsurf100_zorro_tbl[] = {
+ { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100, },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(zorro, xsurf100_zorro_tbl);
+
+static struct zorro_driver xsurf100_driver = {
+ .name = "xsurf100",
+ .id_table = xsurf100_zorro_tbl,
+ .probe = xsurf100_probe,
+ .remove = xsurf100_remove,
+};
+
+module_driver(xsurf100_driver, zorro_register_driver, zorro_unregister_driver);
+
+MODULE_DESCRIPTION("X-Surf 100 driver");
+MODULE_AUTHOR("Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>");
+MODULE_LICENSE("GPL v2");