diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 18 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/hwif.h | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 |
6 files changed, 44 insertions, 5 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index cb5b0f58c395..edf20361ea5f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -111,7 +111,7 @@ config DWMAC_ROCKCHIP config DWMAC_SOCFPGA tristate "SOCFPGA dwmac support" default ARCH_SOCFPGA - depends on OF && (ARCH_SOCFPGA || COMPILE_TEST) + depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST) select MFD_SYSCON help Support for ethernet controller on Altera SOCFPGA diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index 6e359572b9f0..5b3b06a0a3bf 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -55,6 +55,7 @@ struct socfpga_dwmac { struct device *dev; struct regmap *sys_mgr_base_addr; struct reset_control *stmmac_rst; + struct reset_control *stmmac_ocp_rst; void __iomem *splitter_base; bool f2h_ptp_ref_clk; struct tse_pcs pcs; @@ -262,8 +263,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac) val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; /* Assert reset to the enet controller before changing the phy mode */ - if (dwmac->stmmac_rst) - reset_control_assert(dwmac->stmmac_rst); + reset_control_assert(dwmac->stmmac_ocp_rst); + reset_control_assert(dwmac->stmmac_rst); regmap_read(sys_mgr_base_addr, reg_offset, &ctrl); ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift); @@ -288,8 +289,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac) /* Deassert reset for the phy configuration to be sampled by * the enet controller, and operation to start in requested mode */ - if (dwmac->stmmac_rst) - reset_control_deassert(dwmac->stmmac_rst); + reset_control_deassert(dwmac->stmmac_ocp_rst); + reset_control_deassert(dwmac->stmmac_rst); if (phymode == PHY_INTERFACE_MODE_SGMII) { if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) { dev_err(dwmac->dev, "Unable to initialize TSE PCS"); @@ -324,6 +325,15 @@ static int socfpga_dwmac_probe(struct platform_device *pdev) goto err_remove_config_dt; } + dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp"); + if (IS_ERR(dwmac->stmmac_ocp_rst)) { + ret = PTR_ERR(dwmac->stmmac_ocp_rst); + dev_err(dev, "error getting reset control of ocp %d\n", ret); + goto err_remove_config_dt; + } + + reset_control_deassert(dwmac->stmmac_ocp_rst); + ret = socfpga_dwmac_parse_data(dwmac, dev); if (ret) { dev_err(dev, "Unable to parse OF data\n"); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index d37f17ca62fe..65bc3556bd8f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -407,6 +407,16 @@ static void dwmac4_enable_tso(void __iomem *ioaddr, bool en, u32 chan) } } +static void dwmac4_set_bfsize(void __iomem *ioaddr, int bfsize, u32 chan) +{ + u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan)); + + value &= ~DMA_RBSZ_MASK; + value |= (bfsize << DMA_RBSZ_SHIFT) & DMA_RBSZ_MASK; + + writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan)); +} + const struct stmmac_dma_ops dwmac4_dma_ops = { .reset = dwmac4_dma_reset, .init = dwmac4_dma_init, @@ -431,6 +441,7 @@ const struct stmmac_dma_ops dwmac4_dma_ops = { .set_rx_tail_ptr = dwmac4_set_rx_tail_ptr, .set_tx_tail_ptr = dwmac4_set_tx_tail_ptr, .enable_tso = dwmac4_enable_tso, + .set_bfsize = dwmac4_set_bfsize, }; const struct stmmac_dma_ops dwmac410_dma_ops = { @@ -457,4 +468,5 @@ const struct stmmac_dma_ops dwmac410_dma_ops = { .set_rx_tail_ptr = dwmac4_set_rx_tail_ptr, .set_tx_tail_ptr = dwmac4_set_tx_tail_ptr, .enable_tso = dwmac4_enable_tso, + .set_bfsize = dwmac4_set_bfsize, }; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h index c63c1fe3f26b..22a4a6dbb1a4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h @@ -120,6 +120,8 @@ /* DMA Rx Channel X Control register defines */ #define DMA_CONTROL_SR BIT(0) +#define DMA_RBSZ_MASK GENMASK(14, 1) +#define DMA_RBSZ_SHIFT 1 /* Interrupt status per channel */ #define DMA_CHAN_STATUS_REB GENMASK(21, 19) diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index e44e7b26ce82..fe8b536b13f8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -183,6 +183,7 @@ struct stmmac_dma_ops { void (*set_rx_tail_ptr)(void __iomem *ioaddr, u32 tail_ptr, u32 chan); void (*set_tx_tail_ptr)(void __iomem *ioaddr, u32 tail_ptr, u32 chan); void (*enable_tso)(void __iomem *ioaddr, bool en, u32 chan); + void (*set_bfsize)(void __iomem *ioaddr, int bfsize, u32 chan); }; #define stmmac_reset(__priv, __args...) \ @@ -235,6 +236,8 @@ struct stmmac_dma_ops { stmmac_do_void_callback(__priv, dma, set_tx_tail_ptr, __args) #define stmmac_enable_tso(__priv, __args...) \ stmmac_do_void_callback(__priv, dma, enable_tso, __args) +#define stmmac_set_dma_bfsize(__priv, __args...) \ + stmmac_do_void_callback(__priv, dma, set_bfsize, __args) struct mac_device_info; struct net_device; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e79b0d7b388a..60f59abab009 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -928,6 +928,7 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv) static int stmmac_init_phy(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); + u32 tx_cnt = priv->plat->tx_queues_to_use; struct phy_device *phydev; char phy_id_fmt[MII_BUS_ID_SIZE + 3]; char bus_id[MII_BUS_ID_SIZE]; @@ -969,6 +970,15 @@ static int stmmac_init_phy(struct net_device *dev) SUPPORTED_1000baseT_Full); /* + * Half-duplex mode not supported with multiqueue + * half-duplex can only works with single queue + */ + if (tx_cnt > 1) + phydev->supported &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_100baseT_Half | + SUPPORTED_10baseT_Half); + + /* * Broken HW is sometimes missing the pull-up resistor on the * MDIO line, which results in reads to non-existent devices returning * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent @@ -1794,6 +1804,8 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, qmode); + stmmac_set_dma_bfsize(priv, priv->ioaddr, priv->dma_buf_sz, + chan); } for (chan = 0; chan < tx_channels_count; chan++) { |