summaryrefslogtreecommitdiffstats
path: root/drivers/net/fddi/defxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/fddi/defxx.c')
-rw-r--r--drivers/net/fddi/defxx.c187
1 files changed, 126 insertions, 61 deletions
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index caed6eee289c..7f975a2c8990 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -414,7 +414,7 @@ static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data)
* ================
*
* Overview:
- * Retrieves the address range used to access control and status
+ * Retrieves the address ranges used to access control and status
* registers.
*
* Returns:
@@ -422,8 +422,8 @@ static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data)
*
* Arguments:
* bdev - pointer to device information
- * bar_start - pointer to store the start address
- * bar_len - pointer to store the length of the area
+ * bar_start - pointer to store the start addresses
+ * bar_len - pointer to store the lengths of the areas
*
* Assumptions:
* I am sure there are some.
@@ -442,38 +442,47 @@ static void dfx_get_bars(struct device *bdev,
if (dfx_bus_pci) {
int num = dfx_use_mmio ? 0 : 1;
- *bar_start = pci_resource_start(to_pci_dev(bdev), num);
- *bar_len = pci_resource_len(to_pci_dev(bdev), num);
+ bar_start[0] = pci_resource_start(to_pci_dev(bdev), num);
+ bar_len[0] = pci_resource_len(to_pci_dev(bdev), num);
+ bar_start[2] = bar_start[1] = 0;
+ bar_len[2] = bar_len[1] = 0;
}
if (dfx_bus_eisa) {
unsigned long base_addr = to_eisa_device(bdev)->base_addr;
- resource_size_t bar;
+ resource_size_t bar_lo;
+ resource_size_t bar_hi;
if (dfx_use_mmio) {
- bar = inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_2);
- bar <<= 8;
- bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_1);
- bar <<= 8;
- bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_0);
- bar <<= 16;
- *bar_start = bar;
- bar = inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_2);
- bar <<= 8;
- bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_1);
- bar <<= 8;
- bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_0);
- bar <<= 16;
- *bar_len = (bar | PI_MEM_ADD_MASK_M) + 1;
+ bar_lo = inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_2);
+ bar_lo <<= 8;
+ bar_lo |= inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_1);
+ bar_lo <<= 8;
+ bar_lo |= inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_0);
+ bar_lo <<= 8;
+ bar_start[0] = bar_lo;
+ bar_hi = inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_2);
+ bar_hi <<= 8;
+ bar_hi |= inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_1);
+ bar_hi <<= 8;
+ bar_hi |= inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_0);
+ bar_hi <<= 8;
+ bar_len[0] = ((bar_hi - bar_lo) | PI_MEM_ADD_MASK_M) +
+ 1;
} else {
- *bar_start = base_addr;
- *bar_len = PI_ESIC_K_CSR_IO_LEN +
- PI_ESIC_K_BURST_HOLDOFF_LEN;
+ bar_start[0] = base_addr;
+ bar_len[0] = PI_ESIC_K_CSR_IO_LEN;
}
+ bar_start[1] = base_addr + PI_DEFEA_K_BURST_HOLDOFF;
+ bar_len[1] = PI_ESIC_K_BURST_HOLDOFF_LEN;
+ bar_start[2] = base_addr + PI_ESIC_K_ESIC_CSR;
+ bar_len[2] = PI_ESIC_K_ESIC_CSR_LEN;
}
if (dfx_bus_tc) {
- *bar_start = to_tc_dev(bdev)->resource.start +
- PI_TC_K_CSR_OFFSET;
- *bar_len = PI_TC_K_CSR_LEN;
+ bar_start[0] = to_tc_dev(bdev)->resource.start +
+ PI_TC_K_CSR_OFFSET;
+ bar_len[0] = PI_TC_K_CSR_LEN;
+ bar_start[2] = bar_start[1] = 0;
+ bar_len[2] = bar_len[1] = 0;
}
}
@@ -518,13 +527,14 @@ static int dfx_register(struct device *bdev)
{
static int version_disp;
int dfx_bus_pci = dev_is_pci(bdev);
+ int dfx_bus_eisa = DFX_BUS_EISA(bdev);
int dfx_bus_tc = DFX_BUS_TC(bdev);
int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
const char *print_name = dev_name(bdev);
struct net_device *dev;
DFX_board_t *bp; /* board pointer */
- resource_size_t bar_start = 0; /* pointer to port */
- resource_size_t bar_len = 0; /* resource length */
+ resource_size_t bar_start[3]; /* pointers to ports */
+ resource_size_t bar_len[3]; /* resource length */
int alloc_size; /* total buffer size used */
struct resource *region;
int err = 0;
@@ -542,10 +552,13 @@ static int dfx_register(struct device *bdev)
}
/* Enable PCI device. */
- if (dfx_bus_pci && pci_enable_device(to_pci_dev(bdev))) {
- printk(KERN_ERR "%s: Cannot enable PCI device, aborting\n",
- print_name);
- goto err_out;
+ if (dfx_bus_pci) {
+ err = pci_enable_device(to_pci_dev(bdev));
+ if (err) {
+ pr_err("%s: Cannot enable PCI device, aborting\n",
+ print_name);
+ goto err_out;
+ }
}
SET_NETDEV_DEV(dev, bdev);
@@ -554,31 +567,62 @@ static int dfx_register(struct device *bdev)
bp->bus_dev = bdev;
dev_set_drvdata(bdev, dev);
- dfx_get_bars(bdev, &bar_start, &bar_len);
+ dfx_get_bars(bdev, bar_start, bar_len);
+ if (dfx_bus_eisa && dfx_use_mmio && bar_start[0] == 0) {
+ pr_err("%s: Cannot use MMIO, no address set, aborting\n",
+ print_name);
+ pr_err("%s: Run ECU and set adapter's MMIO location\n",
+ print_name);
+ pr_err("%s: Or recompile driver with \"CONFIG_DEFXX_MMIO=n\""
+ "\n", print_name);
+ err = -ENXIO;
+ goto err_out;
+ }
if (dfx_use_mmio)
- region = request_mem_region(bar_start, bar_len, print_name);
+ region = request_mem_region(bar_start[0], bar_len[0],
+ print_name);
else
- region = request_region(bar_start, bar_len, print_name);
+ region = request_region(bar_start[0], bar_len[0], print_name);
if (!region) {
- printk(KERN_ERR "%s: Cannot reserve I/O resource "
- "0x%lx @ 0x%lx, aborting\n",
- print_name, (long)bar_len, (long)bar_start);
+ pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, "
+ "aborting\n", dfx_use_mmio ? "MMIO" : "I/O", print_name,
+ (long)bar_len[0], (long)bar_start[0]);
err = -EBUSY;
goto err_out_disable;
}
+ if (bar_start[1] != 0) {
+ region = request_region(bar_start[1], bar_len[1], print_name);
+ if (!region) {
+ pr_err("%s: Cannot reserve I/O resource "
+ "0x%lx @ 0x%lx, aborting\n", print_name,
+ (long)bar_len[1], (long)bar_start[1]);
+ err = -EBUSY;
+ goto err_out_csr_region;
+ }
+ }
+ if (bar_start[2] != 0) {
+ region = request_region(bar_start[2], bar_len[2], print_name);
+ if (!region) {
+ pr_err("%s: Cannot reserve I/O resource "
+ "0x%lx @ 0x%lx, aborting\n", print_name,
+ (long)bar_len[2], (long)bar_start[2]);
+ err = -EBUSY;
+ goto err_out_bh_region;
+ }
+ }
/* Set up I/O base address. */
if (dfx_use_mmio) {
- bp->base.mem = ioremap_nocache(bar_start, bar_len);
+ bp->base.mem = ioremap_nocache(bar_start[0], bar_len[0]);
if (!bp->base.mem) {
printk(KERN_ERR "%s: Cannot map MMIO\n", print_name);
err = -ENOMEM;
- goto err_out_region;
+ goto err_out_esic_region;
}
} else {
- bp->base.port = bar_start;
- dev->base_addr = bar_start;
+ bp->base.port = bar_start[0];
+ dev->base_addr = bar_start[0];
}
/* Initialize new device structure */
@@ -587,7 +631,7 @@ static int dfx_register(struct device *bdev)
if (dfx_bus_pci)
pci_set_master(to_pci_dev(bdev));
- if (dfx_driver_init(dev, print_name, bar_start) != DFX_K_SUCCESS) {
+ if (dfx_driver_init(dev, print_name, bar_start[0]) != DFX_K_SUCCESS) {
err = -ENODEV;
goto err_out_unmap;
}
@@ -615,11 +659,19 @@ err_out_unmap:
if (dfx_use_mmio)
iounmap(bp->base.mem);
-err_out_region:
+err_out_esic_region:
+ if (bar_start[2] != 0)
+ release_region(bar_start[2], bar_len[2]);
+
+err_out_bh_region:
+ if (bar_start[1] != 0)
+ release_region(bar_start[1], bar_len[1]);
+
+err_out_csr_region:
if (dfx_use_mmio)
- release_mem_region(bar_start, bar_len);
+ release_mem_region(bar_start[0], bar_len[0]);
else
- release_region(bar_start, bar_len);
+ release_region(bar_start[0], bar_len[0]);
err_out_disable:
if (dfx_bus_pci)
@@ -711,13 +763,14 @@ static void dfx_bus_init(struct net_device *dev)
}
/*
- * Enable memory decoding (MEMCS0) and/or port decoding
+ * Enable memory decoding (MEMCS1) and/or port decoding
* (IOCS1/IOCS0) as appropriate in Function Control
- * Register. IOCS0 is used for PDQ registers, taking 16
- * 32-bit words, while IOCS1 is used for the Burst Holdoff
- * register, taking a single 32-bit word only. We use the
- * slot-specific I/O range as per the ESIC spec, that is
- * set bits 15:12 in the mask registers to mask them out.
+ * Register. MEMCS1 or IOCS0 is used for PDQ registers,
+ * taking 16 32-bit words, while IOCS1 is used for the
+ * Burst Holdoff register, taking a single 32-bit word
+ * only. We use the slot-specific I/O range as per the
+ * ESIC spec, that is set bits 15:12 in the mask registers
+ * to mask them out.
*/
/* Set the decode range of the board. */
@@ -742,9 +795,11 @@ static void dfx_bus_init(struct net_device *dev)
outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0);
/* Enable the decoders. */
- val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0;
+ val = PI_FUNCTION_CNTRL_M_IOCS1;
if (dfx_use_mmio)
- val |= PI_FUNCTION_CNTRL_M_MEMCS0;
+ val |= PI_FUNCTION_CNTRL_M_MEMCS1;
+ else
+ val |= PI_FUNCTION_CNTRL_M_IOCS0;
outb(val, base_addr + PI_ESIC_K_FUNCTION_CNTRL);
/*
@@ -838,6 +893,12 @@ static void dfx_bus_uninit(struct net_device *dev)
val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
val &= ~PI_CONFIG_STAT_0_M_INT_ENB;
outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+
+ /* Disable the board. */
+ outb(0, base_addr + PI_ESIC_K_SLOT_CNTRL);
+
+ /* Disable memory and port decoders. */
+ outb(0, base_addr + PI_ESIC_K_FUNCTION_CNTRL);
}
if (dfx_bus_pci) {
/* Disable interrupts at PCI bus interface chip (PFI) */
@@ -1061,8 +1122,8 @@ static int dfx_driver_init(struct net_device *dev, const char *print_name,
board_name = "DEFEA";
if (dfx_bus_pci)
board_name = "DEFPA";
- pr_info("%s: %s at %saddr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",
- print_name, board_name, dfx_use_mmio ? "" : "I/O ",
+ pr_info("%s: %s at %s addr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",
+ print_name, board_name, dfx_use_mmio ? "MMIO" : "I/O",
(long long)bar_start, dev->irq, dev->dev_addr);
/*
@@ -3636,8 +3697,8 @@ static void dfx_unregister(struct device *bdev)
int dfx_bus_pci = dev_is_pci(bdev);
int dfx_bus_tc = DFX_BUS_TC(bdev);
int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
- resource_size_t bar_start = 0; /* pointer to port */
- resource_size_t bar_len = 0; /* resource length */
+ resource_size_t bar_start[3]; /* pointers to ports */
+ resource_size_t bar_len[3]; /* resource lengths */
int alloc_size; /* total buffer size used */
unregister_netdev(dev);
@@ -3655,12 +3716,16 @@ static void dfx_unregister(struct device *bdev)
dfx_bus_uninit(dev);
- dfx_get_bars(bdev, &bar_start, &bar_len);
+ dfx_get_bars(bdev, bar_start, bar_len);
+ if (bar_start[2] != 0)
+ release_region(bar_start[2], bar_len[2]);
+ if (bar_start[1] != 0)
+ release_region(bar_start[1], bar_len[1]);
if (dfx_use_mmio) {
iounmap(bp->base.mem);
- release_mem_region(bar_start, bar_len);
+ release_mem_region(bar_start[0], bar_len[0]);
} else
- release_region(bar_start, bar_len);
+ release_region(bar_start[0], bar_len[0]);
if (dfx_bus_pci)
pci_disable_device(to_pci_dev(bdev));