summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/ixgbe_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_main.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c88
1 files changed, 57 insertions, 31 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e756e220db32..e3442f47f932 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -563,7 +563,6 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
union ixgbe_adv_rx_desc *rx_desc;
struct ixgbe_rx_buffer *bi;
unsigned int i;
- unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
i = rx_ring->next_to_use;
bi = &rx_ring->rx_buffer_info[i];
@@ -593,7 +592,9 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
if (!bi->skb) {
struct sk_buff *skb;
- skb = netdev_alloc_skb(adapter->netdev, bufsz);
+ skb = netdev_alloc_skb(adapter->netdev,
+ (rx_ring->rx_buf_len +
+ NET_IP_ALIGN));
if (!skb) {
adapter->alloc_rx_buff_failed++;
@@ -608,7 +609,8 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
skb_reserve(skb, NET_IP_ALIGN);
bi->skb = skb;
- bi->dma = pci_map_single(pdev, skb->data, bufsz,
+ bi->dma = pci_map_single(pdev, skb->data,
+ rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
}
/* Refresh the desc even if buffer_addrs didn't change because
@@ -732,6 +734,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
pci_unmap_single(pdev, rx_buffer_info->dma,
rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
+ rx_buffer_info->dma = 0;
skb_put(skb, len);
}
@@ -2694,16 +2697,23 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
/*
* For hot-pluggable SFP+ devices, a new SFP+ module may have
- * arrived before interrupts were enabled. We need to kick off
- * the SFP+ module setup first, then try to bring up link.
+ * arrived before interrupts were enabled but after probe. Such
+ * devices wouldn't have their type identified yet. We need to
+ * kick off the SFP+ module setup first, then try to bring up link.
* If we're not hot-pluggable SFP+, we just need to configure link
* and bring it up.
*/
- err = hw->phy.ops.identify(hw);
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
- ixgbe_down(adapter);
- return err;
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ err = hw->phy.ops.identify(hw);
+ if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ /*
+ * Take the device down and schedule the sfp tasklet
+ * which will unregister_netdev and log it.
+ */
+ ixgbe_down(adapter);
+ schedule_work(&adapter->sfp_config_module_task);
+ return err;
+ }
}
if (ixgbe_is_sfp(hw)) {
@@ -2812,9 +2822,11 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
}
if (!rx_buffer_info->page)
continue;
- pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE / 2,
- PCI_DMA_FROMDEVICE);
- rx_buffer_info->page_dma = 0;
+ if (rx_buffer_info->page_dma) {
+ pci_unmap_page(pdev, rx_buffer_info->page_dma,
+ PAGE_SIZE / 2, PCI_DMA_FROMDEVICE);
+ rx_buffer_info->page_dma = 0;
+ }
put_page(rx_buffer_info->page);
rx_buffer_info->page = NULL;
rx_buffer_info->page_offset = 0;
@@ -3118,7 +3130,11 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
#endif
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
- ixgbe_set_rss_queues(adapter);
+ if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+ (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+ ixgbe_set_fdir_queues(adapter);
+ else
+ ixgbe_set_rss_queues(adapter);
}
/* adding FCoE rx rings to the end */
f->mask = adapter->num_rx_queues;
@@ -3376,7 +3392,12 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
}
#endif /* CONFIG_IXGBE_DCB */
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- ixgbe_cache_ring_rss(adapter);
+ if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+ (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+ ixgbe_cache_ring_fdir(adapter);
+ else
+ ixgbe_cache_ring_rss(adapter);
+
fcoe_i = f->mask;
}
for (i = 0; i < f->indices; i++, fcoe_i++)
@@ -3716,14 +3737,15 @@ static void ixgbe_sfp_task(struct work_struct *work)
if ((hw->phy.type == ixgbe_phy_nl) &&
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
s32 ret = hw->phy.ops.identify_sfp(hw);
- if (ret)
+ if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
goto reschedule;
ret = hw->phy.ops.reset(hw);
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "failed to initialize because an "
- "unsupported SFP+ module type was detected.\n"
- "Reload the driver after installing a "
- "supported module.\n");
+ dev_err(&adapter->pdev->dev, "failed to initialize "
+ "because an unsupported SFP+ module type "
+ "was detected.\n"
+ "Reload the driver after installing a "
+ "supported module.\n");
unregister_netdev(adapter->netdev);
} else {
DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
@@ -4502,7 +4524,8 @@ static void ixgbe_multispeed_fiber_task(struct work_struct *work)
u32 autoneg;
adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
- if (hw->mac.ops.get_link_capabilities)
+ autoneg = hw->phy.autoneg_advertised;
+ if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
hw->mac.ops.get_link_capabilities(hw, &autoneg,
&hw->mac.autoneg);
if (hw->mac.ops.setup_link_speed)
@@ -4524,10 +4547,17 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
u32 err;
adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+ /* Time for electrical oscillations to settle down */
+ msleep(100);
err = hw->phy.ops.identify_sfp(hw);
+
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
- ixgbe_down(adapter);
+ dev_err(&adapter->pdev->dev, "failed to initialize because "
+ "an unsupported SFP+ module type was detected.\n"
+ "Reload the driver after installing a supported "
+ "module.\n");
+ unregister_netdev(adapter->netdev);
return;
}
hw->mac.ops.setup_sfp(hw);
@@ -5513,8 +5543,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
round_jiffies(jiffies + (2 * HZ)));
err = 0;
} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to load because an "
- "unsupported SFP+ module type was detected.\n");
+ dev_err(&adapter->pdev->dev, "failed to initialize because "
+ "an unsupported SFP+ module type was detected.\n"
+ "Reload the driver after installing a supported "
+ "module.\n");
goto err_sw_init;
} else if (err) {
dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
@@ -5555,12 +5587,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
netdev->features |= NETIF_F_FCOE_CRC;
netdev->features |= NETIF_F_FSO;
netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
- DPRINTK(DRV, INFO, "FCoE enabled, "
- "disabling Flow Director\n");
- adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
- adapter->flags &=
- ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
- adapter->atr_sample_rate = 0;
} else {
adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
}
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-12 18:52:49 +0200