summaryrefslogtreecommitdiffstats
path: root/drivers/net/sk98lin/h/skgei2c.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sk98lin/h/skgei2c.h')
-rw-r--r--drivers/net/sk98lin/h/skgei2c.h210
1 files changed, 0 insertions, 210 deletions
diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h
deleted file mode 100644
index d9b6f6d8dfe2..000000000000
--- a/drivers/net/sk98lin/h/skgei2c.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/******************************************************************************
- *
- * Name: skgei2c.h
- * Project: Gigabit Ethernet Adapters, TWSI-Module
- * Version: $Revision: 1.25 $
- * Date: $Date: 2003/10/20 09:06:05 $
- * Purpose: Special defines for TWSI
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKGEI2C.H contains all SK-98xx specific defines for the TWSI handling
- */
-
-#ifndef _INC_SKGEI2C_H_
-#define _INC_SKGEI2C_H_
-
-/*
- * Macros to access the B2_I2C_CTRL
- */
-#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \
- SK_OUT32(IoC, B2_I2C_CTRL,\
- (flag ? 0x80000000UL : 0x0L) | \
- (((SK_U32)reg << 16) & I2C_ADDR) | \
- (((SK_U32)dev << 9) & I2C_DEV_SEL) | \
- (dev_size & I2C_DEV_SIZE) | \
- ((burst << 4) & I2C_BURST_LEN))
-
-#define SK_I2C_STOP(IoC) { \
- SK_U32 I2cCtrl; \
- SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl); \
- SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP); \
-}
-
-#define SK_I2C_GET_CTL(IoC, pI2cCtrl) SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl)
-
-/*
- * Macros to access the TWSI SW Registers
- */
-#define SK_I2C_SET_BIT(IoC, SetBits) { \
- SK_U8 OrgBits; \
- SK_IN8(IoC, B2_I2C_SW, &OrgBits); \
- SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits)); \
-}
-
-#define SK_I2C_CLR_BIT(IoC, ClrBits) { \
- SK_U8 OrgBits; \
- SK_IN8(IoC, B2_I2C_SW, &OrgBits); \
- SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits))); \
-}
-
-#define SK_I2C_GET_SW(IoC, pI2cSw) SK_IN8(IoC, B2_I2C_SW, pI2cSw)
-
-/*
- * define the possible sensor states
- */
-#define SK_SEN_IDLE 0 /* Idle: sensor not read */
-#define SK_SEN_VALUE 1 /* Value Read cycle */
-#define SK_SEN_VALEXT 2 /* Extended Value Read cycle */
-
-/*
- * Conversion factor to convert read Voltage sensor to milli Volt
- * Conversion factor to convert read Temperature sensor to 10th degree Celsius
- */
-#define SK_LM80_VT_LSB 22 /* 22mV LSB resolution */
-#define SK_LM80_TEMP_LSB 10 /* 1 degree LSB resolution */
-#define SK_LM80_TEMPEXT_LSB 5 /* 0.5 degree LSB resolution for ext. val. */
-
-/*
- * formula: counter = (22500*60)/(rpm * divisor * pulses/2)
- * assuming: 6500rpm, 4 pulses, divisor 1
- */
-#define SK_LM80_FAN_FAKTOR ((22500L*60)/(1*2))
-
-/*
- * Define sensor management data
- * Maximum is reached on Genesis copper dual port and Yukon-64
- * Board specific maximum is in pAC->I2c.MaxSens
- */
-#define SK_MAX_SENSORS 8 /* maximal no. of installed sensors */
-#define SK_MIN_SENSORS 5 /* minimal no. of installed sensors */
-
-/*
- * To watch the state machine (SM) use the timer in two ways
- * instead of one as hitherto
- */
-#define SK_TIMER_WATCH_SM 0 /* Watch the SM to finish in a spec. time */
-#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */
-
-/*
- * Defines for the individual thresholds
- */
-
-/* Temperature sensor */
-#define SK_SEN_TEMP_HIGH_ERR 800 /* Temperature High Err Threshold */
-#define SK_SEN_TEMP_HIGH_WARN 700 /* Temperature High Warn Threshold */
-#define SK_SEN_TEMP_LOW_WARN 100 /* Temperature Low Warn Threshold */
-#define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */
-
-/* VCC which should be 5 V */
-#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */
-#define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */
-#define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */
-#define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */
-
-/*
- * VIO may be 5 V or 3.3 V. Initialization takes two parts:
- * 1. Initialize lowest lower limit and highest higher limit.
- * 2. After the first value is read correct the upper or the lower limit to
- * the appropriate C constant.
- *
- * Warning limits are +-5% of the exepected voltage.
- * Error limits are +-10% of the expected voltage.
- */
-
-/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */
-
-#define SK_SEN_PCI_IO_5V_HIGH_ERR 5566 /* + 10% V PCI-IO High Err Threshold */
-#define SK_SEN_PCI_IO_5V_HIGH_WARN 5324 /* + 5% V PCI-IO High Warn Threshold */
- /* 5000 mVolt */
-#define SK_SEN_PCI_IO_5V_LOW_WARN 4686 /* - 5% V PCI-IO Low Warn Threshold */
-#define SK_SEN_PCI_IO_5V_LOW_ERR 4444 /* - 10% V PCI-IO Low Err Threshold */
-
-#define SK_SEN_PCI_IO_RANGE_LIMITER 4000 /* 4000 mV range delimiter */
-
-/* correction values for the second pass */
-#define SK_SEN_PCI_IO_3V3_HIGH_ERR 3850 /* + 15% V PCI-IO High Err Threshold */
-#define SK_SEN_PCI_IO_3V3_HIGH_WARN 3674 /* + 10% V PCI-IO High Warn Threshold */
- /* 3300 mVolt */
-#define SK_SEN_PCI_IO_3V3_LOW_WARN 2926 /* - 10% V PCI-IO Low Warn Threshold */
-#define SK_SEN_PCI_IO_3V3_LOW_ERR 2772 /* - 15% V PCI-IO Low Err Threshold */
-
-/*
- * VDD voltage
- */
-#define SK_SEN_VDD_HIGH_ERR 3630 /* Voltage ASIC High Err Threshold */
-#define SK_SEN_VDD_HIGH_WARN 3476 /* Voltage ASIC High Warn Threshold */
-#define SK_SEN_VDD_LOW_WARN 3146 /* Voltage ASIC Low Warn Threshold */
-#define SK_SEN_VDD_LOW_ERR 2970 /* Voltage ASIC Low Err Threshold */
-
-/*
- * PHY PLL 3V3 voltage
- */
-#define SK_SEN_PLL_3V3_HIGH_ERR 3630 /* Voltage PMA High Err Threshold */
-#define SK_SEN_PLL_3V3_HIGH_WARN 3476 /* Voltage PMA High Warn Threshold */
-#define SK_SEN_PLL_3V3_LOW_WARN 3146 /* Voltage PMA Low Warn Threshold */
-#define SK_SEN_PLL_3V3_LOW_ERR 2970 /* Voltage PMA Low Err Threshold */
-
-/*
- * VAUX (YUKON only)
- */
-#define SK_SEN_VAUX_3V3_HIGH_ERR 3630 /* Voltage VAUX High Err Threshold */
-#define SK_SEN_VAUX_3V3_HIGH_WARN 3476 /* Voltage VAUX High Warn Threshold */
-#define SK_SEN_VAUX_3V3_LOW_WARN 3146 /* Voltage VAUX Low Warn Threshold */
-#define SK_SEN_VAUX_3V3_LOW_ERR 2970 /* Voltage VAUX Low Err Threshold */
-#define SK_SEN_VAUX_0V_WARN_ERR 0 /* if VAUX not present */
-#define SK_SEN_VAUX_RANGE_LIMITER 1000 /* 1000 mV range delimiter */
-
-/*
- * PHY 2V5 voltage
- */
-#define SK_SEN_PHY_2V5_HIGH_ERR 2750 /* Voltage PHY High Err Threshold */
-#define SK_SEN_PHY_2V5_HIGH_WARN 2640 /* Voltage PHY High Warn Threshold */
-#define SK_SEN_PHY_2V5_LOW_WARN 2376 /* Voltage PHY Low Warn Threshold */
-#define SK_SEN_PHY_2V5_LOW_ERR 2222 /* Voltage PHY Low Err Threshold */
-
-/*
- * ASIC Core 1V5 voltage (YUKON only)
- */
-#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */
-#define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */
-#define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */
-#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */
-
-/*
- * FAN 1 speed
- */
-/* assuming: 6500rpm +-15%, 4 pulses,
- * warning at: 80 %
- * error at: 70 %
- * no upper limit
- */
-#define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */
-#define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */
-#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */
-#define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */
-
-/*
- * Some Voltages need dynamic thresholds
- */
-#define SK_SEN_DYN_INIT_NONE 0 /* No dynamic init of thresholds */
-#define SK_SEN_DYN_INIT_PCI_IO 10 /* Init PCI-IO with new thresholds */
-#define SK_SEN_DYN_INIT_VAUX 11 /* Init VAUX with new thresholds */
-
-extern int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
-#endif /* n_INC_SKGEI2C_H */