summaryrefslogtreecommitdiffstats
path: root/drivers/net/tokenring/madgemc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tokenring/madgemc.c')
-rw-r--r--drivers/net/tokenring/madgemc.c761
1 files changed, 0 insertions, 761 deletions
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
deleted file mode 100644
index 28adcdf3b14c..000000000000
--- a/drivers/net/tokenring/madgemc.c
+++ /dev/null
@@ -1,761 +0,0 @@
-/*
- * madgemc.c: Driver for the Madge Smart 16/4 MC16 MCA token ring card.
- *
- * Written 2000 by Adam Fritzler
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * This driver module supports the following cards:
- * - Madge Smart 16/4 Ringnode MC16
- * - Madge Smart 16/4 Ringnode MC32 (??)
- *
- * Maintainer(s):
- * AF Adam Fritzler
- *
- * Modification History:
- * 16-Jan-00 AF Created
- *
- */
-static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n";
-
-#include <linux/module.h>
-#include <linux/mca.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/trdevice.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include "tms380tr.h"
-#include "madgemc.h" /* Madge-specific constants */
-
-#define MADGEMC_IO_EXTENT 32
-#define MADGEMC_SIF_OFFSET 0x08
-
-struct card_info {
- /*
- * These are read from the BIA ROM.
- */
- unsigned int manid;
- unsigned int cardtype;
- unsigned int cardrev;
- unsigned int ramsize;
-
- /*
- * These are read from the MCA POS registers.
- */
- unsigned int burstmode:2;
- unsigned int fairness:1; /* 0 = Fair, 1 = Unfair */
- unsigned int arblevel:4;
- unsigned int ringspeed:2; /* 0 = 4mb, 1 = 16, 2 = Auto/none */
- unsigned int cabletype:1; /* 0 = RJ45, 1 = DB9 */
-};
-
-static int madgemc_open(struct net_device *dev);
-static int madgemc_close(struct net_device *dev);
-static int madgemc_chipset_init(struct net_device *dev);
-static void madgemc_read_rom(struct net_device *dev, struct card_info *card);
-static unsigned short madgemc_setnselout_pins(struct net_device *dev);
-static void madgemc_setcabletype(struct net_device *dev, int type);
-
-static int madgemc_mcaproc(char *buf, int slot, void *d);
-
-static void madgemc_setregpage(struct net_device *dev, int page);
-static void madgemc_setsifsel(struct net_device *dev, int val);
-static void madgemc_setint(struct net_device *dev, int val);
-
-static irqreturn_t madgemc_interrupt(int irq, void *dev_id);
-
-/*
- * These work around paging, however they don't guarantee you're on the
- * right page.
- */
-#define SIFREADB(reg) (inb(dev->base_addr + ((reg<0x8)?reg:reg-0x8)))
-#define SIFWRITEB(val, reg) (outb(val, dev->base_addr + ((reg<0x8)?reg:reg-0x8)))
-#define SIFREADW(reg) (inw(dev->base_addr + ((reg<0x8)?reg:reg-0x8)))
-#define SIFWRITEW(val, reg) (outw(val, dev->base_addr + ((reg<0x8)?reg:reg-0x8)))
-
-/*
- * Read a byte-length value from the register.
- */
-static unsigned short madgemc_sifreadb(struct net_device *dev, unsigned short reg)
-{
- unsigned short ret;
- if (reg<0x8)
- ret = SIFREADB(reg);
- else {
- madgemc_setregpage(dev, 1);
- ret = SIFREADB(reg);
- madgemc_setregpage(dev, 0);
- }
- return ret;
-}
-
-/*
- * Write a byte-length value to a register.
- */
-static void madgemc_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg)
-{
- if (reg<0x8)
- SIFWRITEB(val, reg);
- else {
- madgemc_setregpage(dev, 1);
- SIFWRITEB(val, reg);
- madgemc_setregpage(dev, 0);
- }
-}
-
-/*
- * Read a word-length value from a register
- */
-static unsigned short madgemc_sifreadw(struct net_device *dev, unsigned short reg)
-{
- unsigned short ret;
- if (reg<0x8)
- ret = SIFREADW(reg);
- else {
- madgemc_setregpage(dev, 1);
- ret = SIFREADW(reg);
- madgemc_setregpage(dev, 0);
- }
- return ret;
-}
-
-/*
- * Write a word-length value to a register.
- */
-static void madgemc_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg)
-{
- if (reg<0x8)
- SIFWRITEW(val, reg);
- else {
- madgemc_setregpage(dev, 1);
- SIFWRITEW(val, reg);
- madgemc_setregpage(dev, 0);
- }
-}
-
-static struct net_device_ops madgemc_netdev_ops __read_mostly;
-
-static int __devinit madgemc_probe(struct device *device)
-{
- static int versionprinted;
- struct net_device *dev;
- struct net_local *tp;
- struct card_info *card;
- struct mca_device *mdev = to_mca_device(device);
- int ret = 0;
-
- if (versionprinted++ == 0)
- printk("%s", version);
-
- if(mca_device_claimed(mdev))
- return -EBUSY;
- mca_device_set_claim(mdev, 1);
-
- dev = alloc_trdev(sizeof(struct net_local));
- if (!dev) {
- printk("madgemc: unable to allocate dev space\n");
- mca_device_set_claim(mdev, 0);
- ret = -ENOMEM;
- goto getout;
- }
-
- dev->netdev_ops = &madgemc_netdev_ops;
-
- card = kmalloc(sizeof(struct card_info), GFP_KERNEL);
- if (card==NULL) {
- ret = -ENOMEM;
- goto getout1;
- }
-
- /*
- * Parse configuration information. This all comes
- * directly from the publicly available @002d.ADF.
- * Get it from Madge or your local ADF library.
- */
-
- /*
- * Base address
- */
- dev->base_addr = 0x0a20 +
- ((mdev->pos[2] & MC16_POS2_ADDR2)?0x0400:0) +
- ((mdev->pos[0] & MC16_POS0_ADDR1)?0x1000:0) +
- ((mdev->pos[3] & MC16_POS3_ADDR3)?0x2000:0);
-
- /*
- * Interrupt line
- */
- switch(mdev->pos[0] >> 6) { /* upper two bits */
- case 0x1: dev->irq = 3; break;
- case 0x2: dev->irq = 9; break; /* IRQ 2 = IRQ 9 */
- case 0x3: dev->irq = 10; break;
- default: dev->irq = 0; break;
- }
-
- if (dev->irq == 0) {
- printk("%s: invalid IRQ\n", dev->name);
- ret = -EBUSY;
- goto getout2;
- }
-
- if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT,
- "madgemc")) {
- printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", mdev->slot, dev->base_addr);
- dev->base_addr += MADGEMC_SIF_OFFSET;
- ret = -EBUSY;
- goto getout2;
- }
- dev->base_addr += MADGEMC_SIF_OFFSET;
-
- /*
- * Arbitration Level
- */
- card->arblevel = ((mdev->pos[0] >> 1) & 0x7) + 8;
-
- /*
- * Burst mode and Fairness
- */
- card->burstmode = ((mdev->pos[2] >> 6) & 0x3);
- card->fairness = ((mdev->pos[2] >> 4) & 0x1);
-
- /*
- * Ring Speed
- */
- if ((mdev->pos[1] >> 2)&0x1)
- card->ringspeed = 2; /* not selected */
- else if ((mdev->pos[2] >> 5) & 0x1)
- card->ringspeed = 1; /* 16Mb */
- else
- card->ringspeed = 0; /* 4Mb */
-
- /*
- * Cable type
- */
- if ((mdev->pos[1] >> 6)&0x1)
- card->cabletype = 1; /* STP/DB9 */
- else
- card->cabletype = 0; /* UTP/RJ-45 */
-
-
- /*
- * ROM Info. This requires us to actually twiddle
- * bits on the card, so we must ensure above that
- * the base address is free of conflict (request_region above).
- */
- madgemc_read_rom(dev, card);
-
- if (card->manid != 0x4d) { /* something went wrong */
- printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid);
- goto getout3;
- }
-
- if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) {
- printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype);
- ret = -EIO;
- goto getout3;
- }
-
- /* All cards except Rev 0 and 1 MC16's have 256kb of RAM */
- if ((card->cardtype == 0x08) && (card->cardrev <= 0x01))
- card->ramsize = 128;
- else
- card->ramsize = 256;
-
- printk("%s: %s Rev %d at 0x%04lx IRQ %d\n",
- dev->name,
- (card->cardtype == 0x08)?MADGEMC16_CARDNAME:
- MADGEMC32_CARDNAME, card->cardrev,
- dev->base_addr, dev->irq);
-
- if (card->cardtype == 0x0d)
- printk("%s: Warning: MC32 support is experimental and highly untested\n", dev->name);
-
- if (card->ringspeed==2) { /* Unknown */
- printk("%s: Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name);
- card->ringspeed = 1; /* default to 16mb */
- }
-
- printk("%s: RAM Size: %dKB\n", dev->name, card->ramsize);
-
- printk("%s: Ring Speed: %dMb/sec on %s\n", dev->name,
- (card->ringspeed)?16:4,
- card->cabletype?"STP/DB9":"UTP/RJ-45");
- printk("%s: Arbitration Level: %d\n", dev->name,
- card->arblevel);
-
- printk("%s: Burst Mode: ", dev->name);
- switch(card->burstmode) {
- case 0: printk("Cycle steal"); break;
- case 1: printk("Limited burst"); break;
- case 2: printk("Delayed release"); break;
- case 3: printk("Immediate release"); break;
- }
- printk(" (%s)\n", (card->fairness)?"Unfair":"Fair");
-
-
- /*
- * Enable SIF before we assign the interrupt handler,
- * just in case we get spurious interrupts that need
- * handling.
- */
- outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */
- madgemc_setsifsel(dev, 1);
- if (request_irq(dev->irq, madgemc_interrupt, IRQF_SHARED,
- "madgemc", dev)) {
- ret = -EBUSY;
- goto getout3;
- }
-
- madgemc_chipset_init(dev); /* enables interrupts! */
- madgemc_setcabletype(dev, card->cabletype);
-
- /* Setup MCA structures */
- mca_device_set_name(mdev, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME);
- mca_set_adapter_procfn(mdev->slot, madgemc_mcaproc, dev);
-
- printk("%s: Ring Station Address: %pM\n",
- dev->name, dev->dev_addr);
-
- if (tmsdev_init(dev, device)) {
- printk("%s: unable to get memory for dev->priv.\n",
- dev->name);
- ret = -ENOMEM;
- goto getout4;
- }
- tp = netdev_priv(dev);
-
- /*
- * The MC16 is physically a 32bit card. However, Madge
- * insists on calling it 16bit, so I'll assume here that
- * they know what they're talking about. Cut off DMA
- * at 16mb.
- */
- tp->setnselout = madgemc_setnselout_pins;
- tp->sifwriteb = madgemc_sifwriteb;
- tp->sifreadb = madgemc_sifreadb;
- tp->sifwritew = madgemc_sifwritew;
- tp->sifreadw = madgemc_sifreadw;
- tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4;
-
- memcpy(tp->ProductID, "Madge MCA 16/4 ", PROD_ID_SIZE + 1);
-
- tp->tmspriv = card;
- dev_set_drvdata(device, dev);
-
- if (register_netdev(dev) == 0)
- return 0;
-
- dev_set_drvdata(device, NULL);
- ret = -ENOMEM;
-getout4:
- free_irq(dev->irq, dev);
-getout3:
- release_region(dev->base_addr-MADGEMC_SIF_OFFSET,
- MADGEMC_IO_EXTENT);
-getout2:
- kfree(card);
-getout1:
- free_netdev(dev);
-getout:
- mca_device_set_claim(mdev, 0);
- return ret;
-}
-
-/*
- * Handle interrupts generated by the card
- *
- * The MicroChannel Madge cards need slightly more handling
- * after an interrupt than other TMS380 cards do.
- *
- * First we must make sure it was this card that generated the
- * interrupt (since interrupt sharing is allowed). Then,
- * because we're using level-triggered interrupts (as is
- * standard on MCA), we must toggle the interrupt line
- * on the card in order to claim and acknowledge the interrupt.
- * Once that is done, the interrupt should be handlable in
- * the normal tms380tr_interrupt() routine.
- *
- * There's two ways we can check to see if the interrupt is ours,
- * both with their own disadvantages...
- *
- * 1) Read in the SIFSTS register from the TMS controller. This
- * is guaranteed to be accurate, however, there's a fairly
- * large performance penalty for doing so: the Madge chips
- * must request the register from the Eagle, the Eagle must
- * read them from its internal bus, and then take the route
- * back out again, for a 16bit read.
- *
- * 2) Use the MC_CONTROL_REG0_SINTR bit from the Madge ASICs.
- * The major disadvantage here is that the accuracy of the
- * bit is in question. However, it cuts out the extra read
- * cycles it takes to read the Eagle's SIF, as its only an
- * 8bit read, and theoretically the Madge bit is directly
- * connected to the interrupt latch coming out of the Eagle
- * hardware (that statement is not verified).
- *
- * I can't determine which of these methods has the best win. For now,
- * we make a compromise. Use the Madge way for the first interrupt,
- * which should be the fast-path, and then once we hit the first
- * interrupt, keep on trying using the SIF method until we've
- * exhausted all contiguous interrupts.
- *
- */
-static irqreturn_t madgemc_interrupt(int irq, void *dev_id)
-{
- int pending,reg1;
- struct net_device *dev;
-
- if (!dev_id) {
- printk("madgemc_interrupt: was not passed a dev_id!\n");
- return IRQ_NONE;
- }
-
- dev = dev_id;
-
- /* Make sure its really us. -- the Madge way */
- pending = inb(dev->base_addr + MC_CONTROL_REG0);
- if (!(pending & MC_CONTROL_REG0_SINTR))
- return IRQ_NONE; /* not our interrupt */
-
- /*
- * Since we're level-triggered, we may miss the rising edge
- * of the next interrupt while we're off handling this one,
- * so keep checking until the SIF verifies that it has nothing
- * left for us to do.
- */
- pending = STS_SYSTEM_IRQ;
- do {
- if (pending & STS_SYSTEM_IRQ) {
-
- /* Toggle the interrupt to reset the latch on card */
- reg1 = inb(dev->base_addr + MC_CONTROL_REG1);
- outb(reg1 ^ MC_CONTROL_REG1_SINTEN,
- dev->base_addr + MC_CONTROL_REG1);
- outb(reg1, dev->base_addr + MC_CONTROL_REG1);
-
- /* Continue handling as normal */
- tms380tr_interrupt(irq, dev_id);
-
- pending = SIFREADW(SIFSTS); /* restart - the SIF way */
-
- } else
- return IRQ_HANDLED;
- } while (1);
-
- return IRQ_HANDLED; /* not reachable */
-}
-
-/*
- * Set the card to the preferred ring speed.
- *
- * Unlike newer cards, the MC16/32 have their speed selection
- * circuit connected to the Madge ASICs and not to the TMS380
- * NSELOUT pins. Set the ASIC bits correctly here, and return
- * zero to leave the TMS NSELOUT bits unaffected.
- *
- */
-static unsigned short madgemc_setnselout_pins(struct net_device *dev)
-{
- unsigned char reg1;
- struct net_local *tp = netdev_priv(dev);
-
- reg1 = inb(dev->base_addr + MC_CONTROL_REG1);
-
- if(tp->DataRate == SPEED_16)
- reg1 |= MC_CONTROL_REG1_SPEED_SEL; /* add for 16mb */
- else if (reg1 & MC_CONTROL_REG1_SPEED_SEL)
- reg1 ^= MC_CONTROL_REG1_SPEED_SEL; /* remove for 4mb */
- outb(reg1, dev->base_addr + MC_CONTROL_REG1);
-
- return 0; /* no change */
-}
-
-/*
- * Set the register page. This equates to the SRSX line
- * on the TMS380Cx6.
- *
- * Register selection is normally done via three contiguous
- * bits. However, some boards (such as the MC16/32) use only
- * two bits, plus a separate bit in the glue chip. This
- * sets the SRSX bit (the top bit). See page 4-17 in the
- * Yellow Book for which registers are affected.
- *
- */
-static void madgemc_setregpage(struct net_device *dev, int page)
-{
- static int reg1;
-
- reg1 = inb(dev->base_addr + MC_CONTROL_REG1);
- if ((page == 0) && (reg1 & MC_CONTROL_REG1_SRSX)) {
- outb(reg1 ^ MC_CONTROL_REG1_SRSX,
- dev->base_addr + MC_CONTROL_REG1);
- }
- else if (page == 1) {
- outb(reg1 | MC_CONTROL_REG1_SRSX,
- dev->base_addr + MC_CONTROL_REG1);
- }
- reg1 = inb(dev->base_addr + MC_CONTROL_REG1);
-}
-
-/*
- * The SIF registers are not mapped into register space by default
- * Set this to 1 to map them, 0 to map the BIA ROM.
- *
- */
-static void madgemc_setsifsel(struct net_device *dev, int val)
-{
- unsigned int reg0;
-
- reg0 = inb(dev->base_addr + MC_CONTROL_REG0);
- if ((val == 0) && (reg0 & MC_CONTROL_REG0_SIFSEL)) {
- outb(reg0 ^ MC_CONTROL_REG0_SIFSEL,
- dev->base_addr + MC_CONTROL_REG0);
- } else if (val == 1) {
- outb(reg0 | MC_CONTROL_REG0_SIFSEL,
- dev->base_addr + MC_CONTROL_REG0);
- }
- reg0 = inb(dev->base_addr + MC_CONTROL_REG0);
-}
-
-/*
- * Enable SIF interrupts
- *
- * This does not enable interrupts in the SIF, but rather
- * enables SIF interrupts to be passed onto the host.
- *
- */
-static void madgemc_setint(struct net_device *dev, int val)
-{
- unsigned int reg1;
-
- reg1 = inb(dev->base_addr + MC_CONTROL_REG1);
- if ((val == 0) && (reg1 & MC_CONTROL_REG1_SINTEN)) {
- outb(reg1 ^ MC_CONTROL_REG1_SINTEN,
- dev->base_addr + MC_CONTROL_REG1);
- } else if (val == 1) {
- outb(reg1 | MC_CONTROL_REG1_SINTEN,
- dev->base_addr + MC_CONTROL_REG1);
- }
-}
-
-/*
- * Cable type is set via control register 7. Bit zero high
- * for UTP, low for STP.
- */
-static void madgemc_setcabletype(struct net_device *dev, int type)
-{
- outb((type==0)?MC_CONTROL_REG7_CABLEUTP:MC_CONTROL_REG7_CABLESTP,
- dev->base_addr + MC_CONTROL_REG7);
-}
-
-/*
- * Enable the functions of the Madge chipset needed for
- * full working order.
- */
-static int madgemc_chipset_init(struct net_device *dev)
-{
- outb(0, dev->base_addr + MC_CONTROL_REG1); /* pull SRESET low */
- tms380tr_wait(100); /* wait for card to reset */
-
- /* bring back into normal operating mode */
- outb(MC_CONTROL_REG1_NSRESET, dev->base_addr + MC_CONTROL_REG1);
-
- /* map SIF registers */
- madgemc_setsifsel(dev, 1);
-
- /* enable SIF interrupts */
- madgemc_setint(dev, 1);
-
- return 0;
-}
-
-/*
- * Disable the board, and put back into power-up state.
- */
-static void madgemc_chipset_close(struct net_device *dev)
-{
- /* disable interrupts */
- madgemc_setint(dev, 0);
- /* unmap SIF registers */
- madgemc_setsifsel(dev, 0);
-}
-
-/*
- * Read the card type (MC16 or MC32) from the card.
- *
- * The configuration registers are stored in two separate
- * pages. Pages are flipped by clearing bit 3 of CONTROL_REG0 (PAGE)
- * for page zero, or setting bit 3 for page one.
- *
- * Page zero contains the following data:
- * Byte 0: Manufacturer ID (0x4D -- ASCII "M")
- * Byte 1: Card type:
- * 0x08 for MC16
- * 0x0D for MC32
- * Byte 2: Card revision
- * Byte 3: Mirror of POS config register 0
- * Byte 4: Mirror of POS 1
- * Byte 5: Mirror of POS 2
- *
- * Page one contains the following data:
- * Byte 0: Unused
- * Byte 1-6: BIA, MSB to LSB.
- *
- * Note that to read the BIA, we must unmap the SIF registers
- * by clearing bit 2 of CONTROL_REG0 (SIFSEL), as the data
- * will reside in the same logical location. For this reason,
- * _never_ read the BIA while the Eagle processor is running!
- * The SIF will be completely inaccessible until the BIA operation
- * is complete.
- *
- */
-static void madgemc_read_rom(struct net_device *dev, struct card_info *card)
-{
- unsigned long ioaddr;
- unsigned char reg0, reg1, tmpreg0, i;
-
- ioaddr = dev->base_addr;
-
- reg0 = inb(ioaddr + MC_CONTROL_REG0);
- reg1 = inb(ioaddr + MC_CONTROL_REG1);
-
- /* Switch to page zero and unmap SIF */
- tmpreg0 = reg0 & ~(MC_CONTROL_REG0_PAGE + MC_CONTROL_REG0_SIFSEL);
- outb(tmpreg0, ioaddr + MC_CONTROL_REG0);
-
- card->manid = inb(ioaddr + MC_ROM_MANUFACTURERID);
- card->cardtype = inb(ioaddr + MC_ROM_ADAPTERID);
- card->cardrev = inb(ioaddr + MC_ROM_REVISION);
-
- /* Switch to rom page one */
- outb(tmpreg0 | MC_CONTROL_REG0_PAGE, ioaddr + MC_CONTROL_REG0);
-
- /* Read BIA */
- dev->addr_len = 6;
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i);
-
- /* Restore original register values */
- outb(reg0, ioaddr + MC_CONTROL_REG0);
- outb(reg1, ioaddr + MC_CONTROL_REG1);
-}
-
-static int madgemc_open(struct net_device *dev)
-{
- /*
- * Go ahead and reinitialize the chipset again, just to
- * make sure we didn't get left in a bad state.
- */
- madgemc_chipset_init(dev);
- tms380tr_open(dev);
- return 0;
-}
-
-static int madgemc_close(struct net_device *dev)
-{
- tms380tr_close(dev);
- madgemc_chipset_close(dev);
- return 0;
-}
-
-/*
- * Give some details available from /proc/mca/slotX
- */
-static int madgemc_mcaproc(char *buf, int slot, void *d)
-{
- struct net_device *dev = (struct net_device *)d;
- struct net_local *tp = netdev_priv(dev);
- struct card_info *curcard = tp->tmspriv;
- int len = 0;
-
- len += sprintf(buf+len, "-------\n");
- if (curcard) {
- len += sprintf(buf+len, "Card Revision: %d\n", curcard->cardrev);
- len += sprintf(buf+len, "RAM Size: %dkb\n", curcard->ramsize);
- len += sprintf(buf+len, "Cable type: %s\n", (curcard->cabletype)?"STP/DB9":"UTP/RJ-45");
- len += sprintf(buf+len, "Configured ring speed: %dMb/sec\n", (curcard->ringspeed)?16:4);
- len += sprintf(buf+len, "Running ring speed: %dMb/sec\n", (tp->DataRate==SPEED_16)?16:4);
- len += sprintf(buf+len, "Device: %s\n", dev->name);
- len += sprintf(buf+len, "IO Port: 0x%04lx\n", dev->base_addr);
- len += sprintf(buf+len, "IRQ: %d\n", dev->irq);
- len += sprintf(buf+len, "Arbitration Level: %d\n", curcard->arblevel);
- len += sprintf(buf+len, "Burst Mode: ");
- switch(curcard->burstmode) {
- case 0: len += sprintf(buf+len, "Cycle steal"); break;
- case 1: len += sprintf(buf+len, "Limited burst"); break;
- case 2: len += sprintf(buf+len, "Delayed release"); break;
- case 3: len += sprintf(buf+len, "Immediate release"); break;
- }
- len += sprintf(buf+len, " (%s)\n", (curcard->fairness)?"Unfair":"Fair");
-
- len += sprintf(buf+len, "Ring Station Address: %pM\n",
- dev->dev_addr);
- } else
- len += sprintf(buf+len, "Card not configured\n");
-
- return len;
-}
-
-static int __devexit madgemc_remove(struct device *device)
-{
- struct net_device *dev = dev_get_drvdata(device);
- struct net_local *tp;
- struct card_info *card;
-
- BUG_ON(!dev);
-
- tp = netdev_priv(dev);
- card = tp->tmspriv;
- kfree(card);
- tp->tmspriv = NULL;
-
- unregister_netdev(dev);
- release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT);
- free_irq(dev->irq, dev);
- tmsdev_term(dev);
- free_netdev(dev);
- dev_set_drvdata(device, NULL);
-
- return 0;
-}
-
-static short madgemc_adapter_ids[] __initdata = {
- 0x002d,
- 0x0000
-};
-
-static struct mca_driver madgemc_driver = {
- .id_table = madgemc_adapter_ids,
- .driver = {
- .name = "madgemc",
- .bus = &mca_bus_type,
- .probe = madgemc_probe,
- .remove = __devexit_p(madgemc_remove),
- },
-};
-
-static int __init madgemc_init (void)
-{
- madgemc_netdev_ops = tms380tr_netdev_ops;
- madgemc_netdev_ops.ndo_open = madgemc_open;
- madgemc_netdev_ops.ndo_stop = madgemc_close;
-
- return mca_register_driver (&madgemc_driver);
-}
-
-static void __exit madgemc_exit (void)
-{
- mca_unregister_driver (&madgemc_driver);
-}
-
-module_init(madgemc_init);
-module_exit(madgemc_exit);
-
-MODULE_LICENSE("GPL");
-