1 files changed, 180 insertions, 8 deletions

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8873c6e6fb96..7f8fc65f2cb4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -504,7 +504,7 @@ static int ath9k_hw_post_init(struct ath_hw *ah)
 		return ecode;
 	}
 
-	if (!AR_SREV_9100(ah) && !AR_SREV_9340(ah)) {
+	if (ah->config.enable_ani) {
 		ath9k_hw_ani_setup(ah);
 		ath9k_hw_ani_init(ah);
 	}
@@ -610,6 +610,10 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 	if (!AR_SREV_9300_20_OR_LATER(ah))
 		ah->ani_function &= ~ATH9K_ANI_MRC_CCK;
 
+	/* disable ANI for 9340 */
+	if (AR_SREV_9340(ah))
+		ah->config.enable_ani = false;
+
 	ath9k_hw_init_mode_regs(ah);
 
 	if (!ah->is_pciexpress)
@@ -1350,6 +1354,7 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah)
 
 static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type)
 {
+	bool ret = false;
 
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
 		REG_WRITE(ah, AR_WA, ah->WARegVal);
@@ -1361,13 +1366,20 @@ static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type)
 
 	switch (type) {
 	case ATH9K_RESET_POWER_ON:
-		return ath9k_hw_set_reset_power_on(ah);
+		ret = ath9k_hw_set_reset_power_on(ah);
+		break;
 	case ATH9K_RESET_WARM:
 	case ATH9K_RESET_COLD:
-		return ath9k_hw_set_reset(ah, type);
+		ret = ath9k_hw_set_reset(ah, type);
+		break;
 	default:
-		return false;
+		break;
 	}
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI)
+		REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2);
+
+	return ret;
 }
 
 static bool ath9k_hw_chip_reset(struct ath_hw *ah,
@@ -1506,6 +1518,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   struct ath9k_hw_cal_data *caldata, bool bChannelChange)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
 	u32 saveLedState;
 	struct ath9k_channel *curchan = ah->curchan;
 	u32 saveDefAntenna;
@@ -1513,6 +1526,53 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	u64 tsf = 0;
 	int i, r;
 	bool allow_fbs = false;
+	bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI);
+	bool save_fullsleep = ah->chip_fullsleep;
+
+	if (mci) {
+
+		ar9003_mci_2g5g_changed(ah, IS_CHAN_2GHZ(chan));
+
+		if (mci_hw->bt_state == MCI_BT_CAL_START) {
+			u32 payload[4] = {0, 0, 0, 0};
+
+			ath_dbg(common, ATH_DBG_MCI, "MCI stop rx for BT CAL");
+
+			mci_hw->bt_state = MCI_BT_CAL;
+
+			/*
+			 * MCI FIX: disable mci interrupt here. This is to avoid
+			 * SW_MSG_DONE or RX_MSG bits to trigger MCI_INT and
+			 * lead to mci_intr reentry.
+			 */
+
+			ar9003_mci_disable_interrupt(ah);
+
+			ath_dbg(common, ATH_DBG_MCI, "send WLAN_CAL_GRANT");
+			MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_GRANT);
+			ar9003_mci_send_message(ah, MCI_GPM, 0, payload,
+						16, true, false);
+
+			ath_dbg(common, ATH_DBG_MCI, "\nMCI BT is calibrating");
+
+			/* Wait BT calibration to be completed for 25ms */
+
+			if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_DONE,
+								  0, 25000))
+				ath_dbg(common, ATH_DBG_MCI,
+					"MCI got BT_CAL_DONE\n");
+			else
+				ath_dbg(common, ATH_DBG_MCI,
+					"MCI ### BT cal takes to long, force"
+					"bt_state to be bt_awake\n");
+			mci_hw->bt_state = MCI_BT_AWAKE;
+			/* MCI FIX: enable mci interrupt here */
+			ar9003_mci_enable_interrupt(ah);
+
+			return true;
+		}
+	}
+
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
@@ -1550,12 +1610,29 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		if (ath9k_hw_channel_change(ah, chan)) {
 			ath9k_hw_loadnf(ah, ah->curchan);
 			ath9k_hw_start_nfcal(ah, true);
+			if (mci && mci_hw->ready)
+				ar9003_mci_2g5g_switch(ah, true);
+
 			if (AR_SREV_9271(ah))
 				ar9002_hw_load_ani_reg(ah, chan);
 			return 0;
 		}
 	}
 
+	if (mci) {
+		ar9003_mci_disable_interrupt(ah);
+
+		if (mci_hw->ready && !save_fullsleep) {
+			ar9003_mci_mute_bt(ah);
+			udelay(20);
+			REG_WRITE(ah, AR_BTCOEX_CTRL, 0);
+		}
+
+		mci_hw->bt_state = MCI_BT_SLEEP;
+		mci_hw->ready = false;
+	}
+
+
 	saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA);
 	if (saveDefAntenna == 0)
 		saveDefAntenna = 1;
@@ -1611,6 +1688,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (r)
 		return r;
 
+	if (mci)
+		ar9003_mci_reset(ah, false, IS_CHAN_2GHZ(chan), save_fullsleep);
+
 	/*
 	 * Some AR91xx SoC devices frequently fail to accept TSF writes
 	 * right after the chip reset. When that happens, write a new
@@ -1728,6 +1808,55 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ath9k_hw_loadnf(ah, chan);
 	ath9k_hw_start_nfcal(ah, true);
 
+	if (mci && mci_hw->ready) {
+
+		if (IS_CHAN_2GHZ(chan) &&
+		    (mci_hw->bt_state == MCI_BT_SLEEP)) {
+
+			if (ar9003_mci_check_int(ah,
+			    AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) ||
+			    ar9003_mci_check_int(ah,
+			    AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)) {
+
+				/*
+				 * BT is sleeping. Check if BT wakes up during
+				 * WLAN calibration. If BT wakes up during
+				 * WLAN calibration, need to go through all
+				 * message exchanges again and recal.
+				 */
+
+				ath_dbg(common, ATH_DBG_MCI, "MCI BT wakes up"
+					"during WLAN calibration\n");
+
+				REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+					  AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
+					  AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE);
+				ath_dbg(common, ATH_DBG_MCI, "MCI send"
+					"REMOTE_RESET\n");
+				ar9003_mci_remote_reset(ah, true);
+				ar9003_mci_send_sys_waking(ah, true);
+				udelay(1);
+				if (IS_CHAN_2GHZ(chan))
+					ar9003_mci_send_lna_transfer(ah, true);
+
+				mci_hw->bt_state = MCI_BT_AWAKE;
+
+				ath_dbg(common, ATH_DBG_MCI, "MCI re-cal\n");
+
+				if (caldata) {
+					caldata->done_txiqcal_once = false;
+					caldata->done_txclcal_once = false;
+					caldata->rtt_hist.num_readings = 0;
+				}
+
+				if (!ath9k_hw_init_cal(ah, chan))
+					return -EIO;
+
+			}
+		}
+		ar9003_mci_enable_interrupt(ah);
+	}
+
 	ENABLE_REGWRITE_BUFFER(ah);
 
 	ath9k_hw_restore_chainmask(ah);
@@ -1770,6 +1899,21 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (ah->btcoex_hw.enabled)
 		ath9k_hw_btcoex_enable(ah);
 
+	if (mci && mci_hw->ready) {
+		/*
+		 * check BT state again to make
+		 * sure it's not changed.
+		 */
+
+		ar9003_mci_sync_bt_state(ah);
+		ar9003_mci_2g5g_switch(ah, true);
+
+		if ((mci_hw->bt_state == MCI_BT_AWAKE) &&
+				(mci_hw->query_bt == true)) {
+			mci_hw->need_flush_btinfo = true;
+		}
+	}
+
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
 		ar9003_hw_bb_watchdog_config(ah);
 
@@ -1934,6 +2078,7 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah, int setChip)
 bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
 	int status = true, setChip = true;
 	static const char *modes[] = {
 		"AWAKE",
@@ -1951,12 +2096,35 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 	switch (mode) {
 	case ATH9K_PM_AWAKE:
 		status = ath9k_hw_set_power_awake(ah, setChip);
+
+		if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI)
+			REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2);
+
 		break;
 	case ATH9K_PM_FULL_SLEEP:
+
+		if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI) {
+			if (ar9003_mci_state(ah, MCI_STATE_ENABLE, NULL) &&
+				(mci->bt_state != MCI_BT_SLEEP) &&
+				!mci->halted_bt_gpm) {
+				ath_dbg(common, ATH_DBG_MCI, "MCI halt BT GPM"
+						"(full_sleep)");
+				ar9003_mci_send_coex_halt_bt_gpm(ah,
+								 true, true);
+			}
+
+			mci->ready = false;
+			REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2);
+		}
+
 		ath9k_set_power_sleep(ah, setChip);
 		ah->chip_fullsleep = true;
 		break;
 	case ATH9K_PM_NETWORK_SLEEP:
+
+		if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI)
+			REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2);
+
 		ath9k_set_power_network_sleep(ah, setChip);
 		break;
 	default:
@@ -2149,6 +2317,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 
 	if (AR_SREV_9485(ah) || AR_SREV_9285(ah) || AR_SREV_9330(ah))
 		chip_chainmask = 1;
+	else if (AR_SREV_9462(ah))
+		chip_chainmask = 3;
 	else if (!AR_SREV_9280_20_OR_LATER(ah))
 		chip_chainmask = 7;
 	else if (!AR_SREV_9300_20_OR_LATER(ah) || AR_SREV_9340(ah))
@@ -2234,7 +2404,9 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
 
 	if (common->btcoex_enabled) {
-		if (AR_SREV_9300_20_OR_LATER(ah)) {
+		if (AR_SREV_9462(ah))
+			btcoex_hw->scheme = ATH_BTCOEX_CFG_MCI;
+		else if (AR_SREV_9300_20_OR_LATER(ah)) {
 			btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
 			btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9300;
 			btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9300;
@@ -2332,11 +2504,11 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
 		ah->enabled_cals |= TX_IQ_CAL;
-		if (!AR_SREV_9330(ah))
+		if (AR_SREV_9485_OR_LATER(ah))
 			ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
 	}
 	if (AR_SREV_9462(ah))
-		pCap->hw_caps |= ATH9K_HW_CAP_RTT;
+		pCap->hw_caps |= ATH9K_HW_CAP_RTT | ATH9K_HW_CAP_MCI;
 
 	return 0;
 }
@@ -2584,7 +2756,7 @@ void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test)
 	struct ath9k_channel *chan = ah->curchan;
 	struct ieee80211_channel *channel = chan->chan;
 
-	reg->power_limit = min_t(int, limit, MAX_RATE_POWER);
+	reg->power_limit = min_t(u32, limit, MAX_RATE_POWER);
 	if (test)
 		channel->max_power = MAX_RATE_POWER / 2;