summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-power.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-power.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-power.c822
1 files changed, 699 insertions, 123 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index f2ea3f05f6e1..4ec6a8307cc6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -36,25 +36,41 @@
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
+#include "iwl-io.h"
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-power.h"
/*
- * Setting power level allow the card to go to sleep when not busy.
+ * Setting power level allows the card to go to sleep when not busy.
*
- * The power level is set to INDEX_1 (the least deep state) by
- * default, and will, in the future, be the deepest state unless
- * otherwise required by pm_qos network latency requirements.
- *
- * Using INDEX_1 without pm_qos is ok because mac80211 will disable
- * PS when even checking every beacon for the TIM bit would exceed
- * the required latency.
+ * We calculate a sleep command based on the required latency, which
+ * we get from mac80211. In order to handle thermal throttling, we can
+ * also use pre-defined power levels.
*/
-#define IWL_POWER_RANGE_0_MAX (2)
-#define IWL_POWER_RANGE_1_MAX (10)
+/*
+ * For now, keep using power level 1 instead of automatically
+ * adjusting ...
+ */
+bool no_sleep_autoadjust = true;
+module_param(no_sleep_autoadjust, bool, S_IRUGO);
+MODULE_PARM_DESC(no_sleep_autoadjust,
+ "don't automatically adjust sleep level "
+ "according to maximum network latency");
+/*
+ * This defines the old power levels. They are still used by default
+ * (level 1) and for thermal throttle (levels 3 through 5)
+ */
+
+struct iwl_power_vec_entry {
+ struct iwl_powertable_cmd cmd;
+ u8 no_dtim;
+};
+
+#define IWL_DTIM_RANGE_0_MAX 2
+#define IWL_DTIM_RANGE_1_MAX 10
#define NOSLP cpu_to_le16(0), 0, 0
#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
@@ -66,9 +82,8 @@
cpu_to_le32(X3), \
cpu_to_le32(X4)}
/* default power management (not Tx power) table values */
-/* for DTIM period 0 through IWL_POWER_RANGE_0_MAX */
+/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
- {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
@@ -77,9 +92,8 @@ static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
};
-/* for DTIM period IWL_POWER_RANGE_0_MAX + 1 through IWL_POWER_RANGE_1_MAX */
+/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
- {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
@@ -87,9 +101,8 @@ static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
};
-/* for DTIM period > IWL_POWER_RANGE_1_MAX */
+/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
- {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
@@ -97,80 +110,29 @@ static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
};
-
-/* set card power command */
-static int iwl_set_power(struct iwl_priv *priv, void *cmd)
-{
- return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
- sizeof(struct iwl_powertable_cmd), cmd);
-}
-
-/* initialize to default */
-static void iwl_power_init_handle(struct iwl_priv *priv)
-{
- struct iwl_power_mgr *pow_data;
- int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_NUM;
- struct iwl_powertable_cmd *cmd;
- int i;
- u16 lctl;
-
- IWL_DEBUG_POWER(priv, "Initialize power \n");
-
- pow_data = &priv->power_data;
-
- memset(pow_data, 0, sizeof(*pow_data));
-
- memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
- memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
- memcpy(&pow_data->pwr_range_2[0], &range_2[0], size);
-
- lctl = iwl_pcie_link_ctl(priv);
-
- IWL_DEBUG_POWER(priv, "adjust power command flags\n");
-
- for (i = 0; i < IWL_POWER_NUM; i++) {
- cmd = &pow_data->pwr_range_0[i].cmd;
-
- if (lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN)
- cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
- else
- cmd->flags |= IWL_POWER_PCI_PM_MSK;
- }
-}
-
-/* adjust power command according to DTIM period and power level*/
-static int iwl_update_power_cmd(struct iwl_priv *priv,
- struct iwl_powertable_cmd *cmd, u16 mode)
+static void iwl_static_sleep_cmd(struct iwl_priv *priv,
+ struct iwl_powertable_cmd *cmd,
+ enum iwl_power_level lvl, int period)
{
- struct iwl_power_vec_entry *range;
- struct iwl_power_mgr *pow_data;
- int i;
- u32 max_sleep = 0;
- u8 period;
+ const struct iwl_power_vec_entry *table;
+ int max_sleep, i;
bool skip;
- if (mode > IWL_POWER_INDEX_5) {
- IWL_DEBUG_POWER(priv, "Error invalid power mode \n");
- return -EINVAL;
- }
+ table = range_2;
+ if (period < IWL_DTIM_RANGE_1_MAX)
+ table = range_1;
+ if (period < IWL_DTIM_RANGE_0_MAX)
+ table = range_0;
- pow_data = &priv->power_data;
+ BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM);
- if (pow_data->dtim_period <= IWL_POWER_RANGE_0_MAX)
- range = &pow_data->pwr_range_0[0];
- else if (pow_data->dtim_period <= IWL_POWER_RANGE_1_MAX)
- range = &pow_data->pwr_range_1[0];
- else
- range = &pow_data->pwr_range_2[0];
-
- period = pow_data->dtim_period;
- memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd));
+ *cmd = table[lvl].cmd;
if (period == 0) {
- period = 1;
skip = false;
+ period = 1;
} else {
- skip = !!range[mode].no_dtim;
+ skip = !!table[lvl].no_dtim;
}
if (skip) {
@@ -178,7 +140,7 @@ static int iwl_update_power_cmd(struct iwl_priv *priv,
max_sleep = le32_to_cpu(slp_itrvl);
if (max_sleep == 0xFF)
max_sleep = period * (skip + 1);
- else if (max_sleep > period)
+ else if (max_sleep > period)
max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
} else {
@@ -190,6 +152,112 @@ static int iwl_update_power_cmd(struct iwl_priv *priv,
if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
+ if (priv->power_data.pci_pm)
+ cmd->flags |= IWL_POWER_PCI_PM_MSK;
+ else
+ cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
+
+ IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
+}
+
+/* default Thermal Throttling transaction table
+ * Current state | Throttling Down | Throttling Up
+ *=============================================================================
+ * Condition Nxt State Condition Nxt State Condition Nxt State
+ *-----------------------------------------------------------------------------
+ * IWL_TI_0 T >= 115 CT_KILL 115>T>=105 TI_1 N/A N/A
+ * IWL_TI_1 T >= 115 CT_KILL 115>T>=110 TI_2 T<=95 TI_0
+ * IWL_TI_2 T >= 115 CT_KILL T<=100 TI_1
+ * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
+ *=============================================================================
+ */
+static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
+ {IWL_TI_1, 105, CT_KILL_THRESHOLD},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
+ {IWL_TI_2, 110, CT_KILL_THRESHOLD},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
+ {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
+ {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+
+/* Advance Thermal Throttling default restriction table */
+static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = {
+ {IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true },
+ {IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true },
+ {IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false },
+ {IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false }
+};
+
+
+static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
+ struct iwl_powertable_cmd *cmd)
+{
+ memset(cmd, 0, sizeof(*cmd));
+
+ if (priv->power_data.pci_pm)
+ cmd->flags |= IWL_POWER_PCI_PM_MSK;
+
+ IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
+}
+
+static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv,
+ struct iwl_powertable_cmd *cmd,
+ int dynps_ms, int wakeup_period)
+{
+ /*
+ * These are the original power level 3 sleep successions. The
+ * device may behave better with such succession and was also
+ * only tested with that. Just like the original sleep commands,
+ * also adjust the succession here to the wakeup_period below.
+ * The ranges are the same as for the sleep commands, 0-2, 3-9
+ * and >10, which is selected based on the DTIM interval for
+ * the sleep index but here we use the wakeup period since that
+ * is what we need to do for the latency requirements.
+ */
+ static const u8 slp_succ_r0[IWL_POWER_VEC_SIZE] = { 2, 2, 2, 2, 2 };
+ static const u8 slp_succ_r1[IWL_POWER_VEC_SIZE] = { 2, 4, 6, 7, 9 };
+ static const u8 slp_succ_r2[IWL_POWER_VEC_SIZE] = { 2, 7, 9, 9, 0xFF };
+ const u8 *slp_succ = slp_succ_r0;
+ int i;
+
+ if (wakeup_period > IWL_DTIM_RANGE_0_MAX)
+ slp_succ = slp_succ_r1;
+ if (wakeup_period > IWL_DTIM_RANGE_1_MAX)
+ slp_succ = slp_succ_r2;
+
+ memset(cmd, 0, sizeof(*cmd));
+
+ cmd->flags = IWL_POWER_DRIVER_ALLOW_SLEEP_MSK |
+ IWL_POWER_FAST_PD; /* no use seeing frames for others */
+
+ if (priv->power_data.pci_pm)
+ cmd->flags |= IWL_POWER_PCI_PM_MSK;
+
+ cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms);
+ cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms);
+
+ for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+ cmd->sleep_interval[i] =
+ cpu_to_le32(min_t(int, slp_succ[i], wakeup_period));
+
+ IWL_DEBUG_POWER(priv, "Automatic sleep command\n");
+}
+
+static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
+{
+ IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
@@ -200,79 +268,587 @@ static int iwl_update_power_cmd(struct iwl_priv *priv,
le32_to_cpu(cmd->sleep_interval[3]),
le32_to_cpu(cmd->sleep_interval[4]));
- return 0;
+ return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
+ sizeof(struct iwl_powertable_cmd), cmd);
}
-/*
- * compute the final power mode index
- */
int iwl_power_update_mode(struct iwl_priv *priv, bool force)
{
- struct iwl_power_mgr *setting = &(priv->power_data);
int ret = 0;
- u16 uninitialized_var(final_mode);
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ bool enabled = (priv->iw_mode == NL80211_IFTYPE_STATION) &&
+ (priv->hw->conf.flags & IEEE80211_CONF_PS);
bool update_chains;
+ struct iwl_powertable_cmd cmd;
+ int dtimper;
/* Don't update the RX chain when chain noise calibration is running */
update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
- final_mode = priv->power_data.user_power_setting;
-
- if (setting->power_disabled)
- final_mode = IWL_POWER_MODE_CAM;
+ if (priv->vif)
+ dtimper = priv->vif->bss_conf.dtim_period;
+ else
+ dtimper = 1;
+
+ /* TT power setting overwrites everything */
+ if (tt->state >= IWL_TI_1)
+ iwl_static_sleep_cmd(priv, &cmd, tt->tt_power_mode, dtimper);
+ else if (!enabled)
+ iwl_power_sleep_cam_cmd(priv, &cmd);
+ else if (priv->power_data.debug_sleep_level_override >= 0)
+ iwl_static_sleep_cmd(priv, &cmd,
+ priv->power_data.debug_sleep_level_override,
+ dtimper);
+ else if (no_sleep_autoadjust)
+ iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_1, dtimper);
+ else
+ iwl_power_fill_sleep_cmd(priv, &cmd,
+ priv->hw->conf.dynamic_ps_timeout,
+ priv->hw->conf.max_sleep_period);
if (iwl_is_ready_rf(priv) &&
- ((setting->power_mode != final_mode) || force)) {
- struct iwl_powertable_cmd cmd;
-
- if (final_mode != IWL_POWER_MODE_CAM)
+ (memcmp(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd)) || force)) {
+ if (cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
set_bit(STATUS_POWER_PMI, &priv->status);
- iwl_update_power_cmd(priv, &cmd, final_mode);
- cmd.keep_alive_beacons = 0;
-
- if (final_mode == IWL_POWER_INDEX_5)
- cmd.flags |= IWL_POWER_FAST_PD;
-
ret = iwl_set_power(priv, &cmd);
-
- if (final_mode == IWL_POWER_MODE_CAM)
- clear_bit(STATUS_POWER_PMI, &priv->status);
-
- if (priv->cfg->ops->lib->update_chain_flags && update_chains)
- priv->cfg->ops->lib->update_chain_flags(priv);
- else
- IWL_DEBUG_POWER(priv, "Cannot update the power, chain noise "
+ if (!ret) {
+ if (!(cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
+ clear_bit(STATUS_POWER_PMI, &priv->status);
+
+ if (priv->cfg->ops->lib->update_chain_flags &&
+ update_chains)
+ priv->cfg->ops->lib->update_chain_flags(priv);
+ else if (priv->cfg->ops->lib->update_chain_flags)
+ IWL_DEBUG_POWER(priv,
+ "Cannot update the power, chain noise "
"calibration running: %d\n",
priv->chain_noise_data.state);
- if (!ret)
- setting->power_mode = final_mode;
+ memcpy(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd));
+ } else
+ IWL_ERR(priv, "set power fail, ret = %d", ret);
}
return ret;
}
EXPORT_SYMBOL(iwl_power_update_mode);
-/* set user_power_setting */
-int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
+bool iwl_ht_enabled(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
+
+ if (!priv->thermal_throttle.advanced_tt)
+ return true;
+ restriction = tt->restriction + tt->state;
+ return restriction->is_ht;
+}
+EXPORT_SYMBOL(iwl_ht_enabled);
+
+enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv)
{
- if (mode >= IWL_POWER_NUM)
- return -EINVAL;
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
- priv->power_data.user_power_setting = mode;
+ if (!priv->thermal_throttle.advanced_tt)
+ return IWL_ANT_OK_MULTI;
+ restriction = tt->restriction + tt->state;
+ return restriction->tx_stream;
+}
+EXPORT_SYMBOL(iwl_tx_ant_restriction);
+
+enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
+
+ if (!priv->thermal_throttle.advanced_tt)
+ return IWL_ANT_OK_MULTI;
+ restriction = tt->restriction + tt->state;
+ return restriction->rx_stream;
+}
+
+#define CT_KILL_EXIT_DURATION (5) /* 5 seconds duration */
+
+/*
+ * toggle the bit to wake up uCode and check the temperature
+ * if the temperature is below CT, uCode will stay awake and send card
+ * state notification with CT_KILL bit clear to inform Thermal Throttling
+ * Management to change state. Otherwise, uCode will go back to sleep
+ * without doing anything, driver should continue the 5 seconds timer
+ * to wake up uCode for temperature check until temperature drop below CT
+ */
+static void iwl_tt_check_exit_ct_kill(unsigned long data)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)data;
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ unsigned long flags;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (tt->state == IWL_TI_CT_KILL) {
+ if (priv->thermal_throttle.ct_kill_toggle) {
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ priv->thermal_throttle.ct_kill_toggle = false;
+ } else {
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ priv->thermal_throttle.ct_kill_toggle = true;
+ }
+ iwl_read32(priv, CSR_UCODE_DRV_GP1);
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ if (!iwl_grab_nic_access(priv))
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+
+ /* Reschedule the ct_kill timer to occur in
+ * CT_KILL_EXIT_DURATION seconds to ensure we get a
+ * thermal update */
+ mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
+ CT_KILL_EXIT_DURATION * HZ);
+ }
+}
+
+static void iwl_perform_ct_kill_task(struct iwl_priv *priv,
+ bool stop)
+{
+ if (stop) {
+ IWL_DEBUG_POWER(priv, "Stop all queues\n");
+ if (priv->mac80211_registered)
+ ieee80211_stop_queues(priv->hw);
+ IWL_DEBUG_POWER(priv,
+ "Schedule 5 seconds CT_KILL Timer\n");
+ mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
+ CT_KILL_EXIT_DURATION * HZ);
+ } else {
+ IWL_DEBUG_POWER(priv, "Wake all queues\n");
+ if (priv->mac80211_registered)
+ ieee80211_wake_queues(priv->hw);
+ }
+}
+
+#define IWL_MINIMAL_POWER_THRESHOLD (CT_KILL_THRESHOLD_LEGACY)
+#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2 (100)
+#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1 (90)
+
+/*
+ * Legacy thermal throttling
+ * 1) Avoid NIC destruction due to high temperatures
+ * Chip will identify dangerously high temperatures that can
+ * harm the device and will power down
+ * 2) Avoid the NIC power down due to high temperature
+ * Throttle early enough to lower the power consumption before
+ * drastic steps are needed
+ */
+static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ enum iwl_tt_state old_state;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if ((tt->tt_previous_temp) &&
+ (temp > tt->tt_previous_temp) &&
+ ((temp - tt->tt_previous_temp) >
+ IWL_TT_INCREASE_MARGIN)) {
+ IWL_DEBUG_POWER(priv,
+ "Temperature increase %d degree Celsius\n",
+ (temp - tt->tt_previous_temp));
+ }
+#endif
+ old_state = tt->state;
+ /* in Celsius */
+ if (temp >= IWL_MINIMAL_POWER_THRESHOLD)
+ tt->state = IWL_TI_CT_KILL;
+ else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2)
+ tt->state = IWL_TI_2;
+ else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1)
+ tt->state = IWL_TI_1;
+ else
+ tt->state = IWL_TI_0;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ tt->tt_previous_temp = temp;
+#endif
+ if (tt->state != old_state) {
+ switch (tt->state) {
+ case IWL_TI_0:
+ /*
+ * When the system is ready to go back to IWL_TI_0
+ * we only have to call iwl_power_update_mode() to
+ * do so.
+ */
+ break;
+ case IWL_TI_1:
+ tt->tt_power_mode = IWL_POWER_INDEX_3;
+ break;
+ case IWL_TI_2:
+ tt->tt_power_mode = IWL_POWER_INDEX_4;
+ break;
+ default:
+ tt->tt_power_mode = IWL_POWER_INDEX_5;
+ break;
+ }
+ mutex_lock(&priv->mutex);
+ if (iwl_power_update_mode(priv, true)) {
+ /* TT state not updated
+ * try again during next temperature read
+ */
+ tt->state = old_state;
+ IWL_ERR(priv, "Cannot update power mode, "
+ "TT state not updated\n");
+ } else {
+ if (tt->state == IWL_TI_CT_KILL)
+ iwl_perform_ct_kill_task(priv, true);
+ else if (old_state == IWL_TI_CT_KILL &&
+ tt->state != IWL_TI_CT_KILL)
+ iwl_perform_ct_kill_task(priv, false);
+ IWL_DEBUG_POWER(priv, "Temperature state changed %u\n",
+ tt->state);
+ IWL_DEBUG_POWER(priv, "Power Index change to %u\n",
+ tt->tt_power_mode);
+ }
+ mutex_unlock(&priv->mutex);
+ }
+}
- return iwl_power_update_mode(priv, 0);
+/*
+ * Advance thermal throttling
+ * 1) Avoid NIC destruction due to high temperatures
+ * Chip will identify dangerously high temperatures that can
+ * harm the device and will power down
+ * 2) Avoid the NIC power down due to high temperature
+ * Throttle early enough to lower the power consumption before
+ * drastic steps are needed
+ * Actions include relaxing the power down sleep thresholds and
+ * decreasing the number of TX streams
+ * 3) Avoid throughput performance impact as much as possible
+ *
+ *=============================================================================
+ * Condition Nxt State Condition Nxt State Condition Nxt State
+ *-----------------------------------------------------------------------------
+ * IWL_TI_0 T >= 115 CT_KILL 115>T>=105 TI_1 N/A N/A
+ * IWL_TI_1 T >= 115 CT_KILL 115>T>=110 TI_2 T<=95 TI_0
+ * IWL_TI_2 T >= 115 CT_KILL T<=100 TI_1
+ * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
+ *=============================================================================
+ */
+static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ int i;
+ bool changed = false;
+ enum iwl_tt_state old_state;
+ struct iwl_tt_trans *transaction;
+
+ old_state = tt->state;
+ for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) {
+ /* based on the current TT state,
+ * find the curresponding transaction table
+ * each table has (IWL_TI_STATE_MAX - 1) entries
+ * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1))
+ * will advance to the correct table.
+ * then based on the current temperature
+ * find the next state need to transaction to
+ * go through all the possible (IWL_TI_STATE_MAX - 1) entries
+ * in the current table to see if transaction is needed
+ */
+ transaction = tt->transaction +
+ ((old_state * (IWL_TI_STATE_MAX - 1)) + i);
+ if (temp >= transaction->tt_low &&
+ temp <= transaction->tt_high) {
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if ((tt->tt_previous_temp) &&
+ (temp > tt->tt_previous_temp) &&
+ ((temp - tt->tt_previous_temp) >
+ IWL_TT_INCREASE_MARGIN)) {
+ IWL_DEBUG_POWER(priv,
+ "Temperature increase %d "
+ "degree Celsius\n",
+ (temp - tt->tt_previous_temp));
+ }
+ tt->tt_previous_temp = temp;
+#endif
+ if (old_state !=
+ transaction->next_state) {
+ changed = true;
+ tt->state =
+ transaction->next_state;
+ }
+ break;
+ }
+ }
+ if (changed) {
+ struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
+
+ if (tt->state >= IWL_TI_1) {
+ /* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */
+ tt->tt_power_mode = IWL_POWER_INDEX_5;
+ if (!iwl_ht_enabled(priv))
+ /* disable HT */
+ rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+ RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
+ RXON_FLG_HT40_PROT_MSK |
+ RXON_FLG_HT_PROT_MSK);
+ else {
+ /* check HT capability and set
+ * according to the system HT capability
+ * in case get disabled before */
+ iwl_set_rxon_ht(priv, &priv->current_ht_config);
+ }
+
+ } else {
+ /*
+ * restore system power setting -- it will be
+ * recalculated automatically.
+ */
+
+ /* check HT capability and set
+ * according to the system HT capability
+ * in case get disabled before */
+ iwl_set_rxon_ht(priv, &priv->current_ht_config);
+ }
+ mutex_lock(&priv->mutex);
+ if (iwl_power_update_mode(priv, true)) {
+ /* TT state not updated
+ * try again during next temperature read
+ */
+ IWL_ERR(priv, "Cannot update power mode, "
+ "TT state not updated\n");
+ tt->state = old_state;
+ } else {
+ IWL_DEBUG_POWER(priv,
+ "Thermal Throttling to new state: %u\n",
+ tt->state);
+ if (old_state != IWL_TI_CT_KILL &&
+ tt->state == IWL_TI_CT_KILL) {
+ IWL_DEBUG_POWER(priv, "Enter IWL_TI_CT_KILL\n");
+ iwl_perform_ct_kill_task(priv, true);
+
+ } else if (old_state == IWL_TI_CT_KILL &&
+ tt->state != IWL_TI_CT_KILL) {
+ IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n");
+ iwl_perform_ct_kill_task(priv, false);
+ }
+ }
+ mutex_unlock(&priv->mutex);
+ }
+}
+
+/* Card State Notification indicated reach critical temperature
+ * if PSP not enable, no Thermal Throttling function will be performed
+ * just set the GP1 bit to acknowledge the event
+ * otherwise, go into IWL_TI_CT_KILL state
+ * since Card State Notification will not provide any temperature reading
+ * for Legacy mode
+ * so just pass the CT_KILL temperature to iwl_legacy_tt_handler()
+ * for advance mode
+ * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state
+ */
+static void iwl_bg_ct_enter(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter);
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (!iwl_is_ready(priv))
+ return;
+
+ if (tt->state != IWL_TI_CT_KILL) {
+ IWL_ERR(priv, "Device reached critical temperature "
+ "- ucode going to sleep!\n");
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv,
+ IWL_MINIMAL_POWER_THRESHOLD);
+ else
+ iwl_advance_tt_handler(priv,
+ CT_KILL_THRESHOLD + 1);
+ }
}
-EXPORT_SYMBOL(iwl_power_set_user_mode);
+
+/* Card State Notification indicated out of critical temperature
+ * since Card State Notification will not provide any temperature reading
+ * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature
+ * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state
+ */
+static void iwl_bg_ct_exit(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit);
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (!iwl_is_ready(priv))
+ return;
+
+ /* stop ct_kill_exit_tm timer */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+
+ if (tt->state == IWL_TI_CT_KILL) {
+ IWL_ERR(priv,
+ "Device temperature below critical"
+ "- ucode awake!\n");
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv,
+ IWL_REDUCED_PERFORMANCE_THRESHOLD_2);
+ else
+ iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD);
+ }
+}
+
+void iwl_tt_enter_ct_kill(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing critical temperature enter.\n");
+ queue_work(priv->workqueue, &priv->ct_enter);
+}
+EXPORT_SYMBOL(iwl_tt_enter_ct_kill);
+
+void iwl_tt_exit_ct_kill(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing critical temperature exit.\n");
+ queue_work(priv->workqueue, &priv->ct_exit);
+}
+EXPORT_SYMBOL(iwl_tt_exit_ct_kill);
+
+static void iwl_bg_tt_work(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work);
+ s32 temp = priv->temperature; /* degrees CELSIUS except 4965 */
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
+ temp = KELVIN_TO_CELSIUS(priv->temperature);
+
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv, temp);
+ else
+ iwl_advance_tt_handler(priv, temp);
+}
+
+void iwl_tt_handler(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing thermal throttling work.\n");
+ queue_work(priv->workqueue, &priv->tt_work);
+}
+EXPORT_SYMBOL(iwl_tt_handler);
+
+/* Thermal throttling initialization
+ * For advance thermal throttling:
+ * Initialize Thermal Index and temperature threshold table
+ * Initialize thermal throttling restriction table
+ */
+void iwl_tt_initialize(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
+ struct iwl_tt_trans *transaction;
+
+ IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling \n");
+
+ memset(tt, 0, sizeof(struct iwl_tt_mgmt));
+
+ tt->state = IWL_TI_0;
+ init_timer(&priv->thermal_throttle.ct_kill_exit_tm);
+ priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv;
+ priv->thermal_throttle.ct_kill_exit_tm.function = iwl_tt_check_exit_ct_kill;
+
+ /* setup deferred ct kill work */
+ INIT_WORK(&priv->tt_work, iwl_bg_tt_work);
+ INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
+ INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
+
+ switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+ case CSR_HW_REV_TYPE_6x00:
+ case CSR_HW_REV_TYPE_6x50:
+ IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
+ tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
+ IWL_TI_STATE_MAX, GFP_KERNEL);
+ tt->transaction = kzalloc(sizeof(struct iwl_tt_trans) *
+ IWL_TI_STATE_MAX * (IWL_TI_STATE_MAX - 1),
+ GFP_KERNEL);
+ if (!tt->restriction || !tt->transaction) {
+ IWL_ERR(priv, "Fallback to Legacy Throttling\n");
+ priv->thermal_throttle.advanced_tt = false;
+ kfree(tt->restriction);
+ tt->restriction = NULL;
+ kfree(tt->transaction);
+ tt->transaction = NULL;
+ } else {
+ transaction = tt->transaction +
+ (IWL_TI_0 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_0[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_1 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_1[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_2 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_2[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_3[0], size);
+ size = sizeof(struct iwl_tt_restriction) *
+ IWL_TI_STATE_MAX;
+ memcpy(tt->restriction,
+ &restriction_range[0], size);
+ priv->thermal_throttle.advanced_tt = true;
+ }
+ break;
+ default:
+ IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
+ priv->thermal_throttle.advanced_tt = false;
+ break;
+ }
+}
+EXPORT_SYMBOL(iwl_tt_initialize);
+
+/* cleanup thermal throttling management related memory and timer */
+void iwl_tt_exit(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ /* stop ct_kill_exit_tm timer if activated */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+ cancel_work_sync(&priv->tt_work);
+ cancel_work_sync(&priv->ct_enter);
+ cancel_work_sync(&priv->ct_exit);
+
+ if (priv->thermal_throttle.advanced_tt) {
+ /* free advance thermal throttling memory */
+ kfree(tt->restriction);
+ tt->restriction = NULL;
+ kfree(tt->transaction);
+ tt->transaction = NULL;
+ }
+}
+EXPORT_SYMBOL(iwl_tt_exit);
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
- iwl_power_init_handle(priv);
- priv->power_data.user_power_setting = IWL_POWER_INDEX_1;
- /* default to disabled until mac80211 says otherwise */
- priv->power_data.power_disabled = 1;
+ u16 lctl = iwl_pcie_link_ctl(priv);
+
+ priv->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
+
+ priv->power_data.debug_sleep_level_override = -1;
+
+ memset(&priv->power_data.sleep_cmd, 0,
+ sizeof(priv->power_data.sleep_cmd));
}
EXPORT_SYMBOL(iwl_power_initialize);