diff options
Diffstat (limited to 'drivers/pci/pci-driver.c')
| -rw-r--r-- | drivers/pci/pci-driver.c | 134 |
1 files changed, 84 insertions, 50 deletions
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index cae630fe6387..a8124e47bf6e 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -399,7 +399,8 @@ void __weak pcibios_free_irq(struct pci_dev *dev) #ifdef CONFIG_PCI_IOV static inline bool pci_device_can_probe(struct pci_dev *pdev) { - return (!pdev->is_virtfn || pdev->physfn->sriov->drivers_autoprobe); + return (!pdev->is_virtfn || pdev->physfn->sriov->drivers_autoprobe || + pdev->driver_override); } #else static inline bool pci_device_can_probe(struct pci_dev *pdev) @@ -414,6 +415,9 @@ static int pci_device_probe(struct device *dev) struct pci_dev *pci_dev = to_pci_dev(dev); struct pci_driver *drv = to_pci_driver(dev->driver); + if (!pci_device_can_probe(pci_dev)) + return -ENODEV; + pci_assign_irq(pci_dev); error = pcibios_alloc_irq(pci_dev); @@ -421,12 +425,10 @@ static int pci_device_probe(struct device *dev) return error; pci_dev_get(pci_dev); - if (pci_device_can_probe(pci_dev)) { - error = __pci_device_probe(drv, pci_dev); - if (error) { - pcibios_free_irq(pci_dev); - pci_dev_put(pci_dev); - } + error = __pci_device_probe(drv, pci_dev); + if (error) { + pcibios_free_irq(pci_dev); + pci_dev_put(pci_dev); } return error; @@ -524,7 +526,6 @@ static void pci_pm_default_resume_early(struct pci_dev *pci_dev) pci_power_up(pci_dev); pci_restore_state(pci_dev); pci_pme_restore(pci_dev); - pci_fixup_device(pci_fixup_resume_early, pci_dev); } /* @@ -679,6 +680,7 @@ static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev) static int pci_pm_prepare(struct device *dev) { struct device_driver *drv = dev->driver; + struct pci_dev *pci_dev = to_pci_dev(dev); if (drv && drv->pm && drv->pm->prepare) { int error = drv->pm->prepare(dev); @@ -688,7 +690,15 @@ static int pci_pm_prepare(struct device *dev) if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) return 0; } - return pci_dev_keep_suspended(to_pci_dev(dev)); + if (pci_dev_need_resume(pci_dev)) + return 0; + + /* + * The PME setting needs to be adjusted here in case the direct-complete + * optimization is used with respect to this device. + */ + pci_dev_adjust_pme(pci_dev); + return 1; } static void pci_pm_complete(struct device *dev) @@ -702,7 +712,14 @@ static void pci_pm_complete(struct device *dev) if (pm_runtime_suspended(dev) && pm_resume_via_firmware()) { pci_power_t pre_sleep_state = pci_dev->current_state; - pci_update_current_state(pci_dev, pci_dev->current_state); + pci_refresh_power_state(pci_dev); + /* + * On platforms with ACPI this check may also trigger for + * devices sharing power resources if one of those power + * resources has been activated as a result of a change of the + * power state of another device sharing it. However, in that + * case it is also better to resume the device, in general. + */ if (pci_dev->current_state < pre_sleep_state) pm_request_resume(dev); } @@ -734,6 +751,8 @@ static int pci_pm_suspend(struct device *dev) struct pci_dev *pci_dev = to_pci_dev(dev); const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + pci_dev->skip_bus_pm = false; + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend(dev, PMSG_SUSPEND); @@ -756,9 +775,11 @@ static int pci_pm_suspend(struct device *dev) * better to resume the device from runtime suspend here. */ if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) || - !pci_dev_keep_suspended(pci_dev)) { + pci_dev_need_resume(pci_dev)) { pm_runtime_resume(dev); pci_dev->state_saved = false; + } else { + pci_dev_adjust_pme(pci_dev); } if (pm->suspend) { @@ -827,7 +848,18 @@ static int pci_pm_suspend_noirq(struct device *dev) } } - if (!pci_dev->state_saved) { + if (pci_dev->skip_bus_pm) { + /* + * Either the device is a bridge with a child in D0 below it, or + * the function is running for the second time in a row without + * going through full resume, which is possible only during + * suspend-to-idle in a spurious wakeup case. The device should + * be in D0 at this point, but if it is a bridge, it may be + * necessary to save its state. + */ + if (!pci_dev->state_saved) + pci_save_state(pci_dev); + } else if (!pci_dev->state_saved) { pci_save_state(pci_dev); if (pci_power_manageable(pci_dev)) pci_prepare_to_sleep(pci_dev); @@ -836,6 +868,22 @@ static int pci_pm_suspend_noirq(struct device *dev) dev_dbg(dev, "PCI PM: Suspend power state: %s\n", pci_power_name(pci_dev->current_state)); + if (pci_dev->current_state == PCI_D0) { + pci_dev->skip_bus_pm = true; + /* + * Per PCI PM r1.2, table 6-1, a bridge must be in D0 if any + * downstream device is in D0, so avoid changing the power state + * of the parent bridge by setting the skip_bus_pm flag for it. + */ + if (pci_dev->bus->self) + pci_dev->bus->self->skip_bus_pm = true; + } + + if (pci_dev->skip_bus_pm && pm_suspend_no_platform()) { + dev_dbg(dev, "PCI PM: Skipped\n"); + goto Fixup; + } + pci_pm_set_unknown_state(pci_dev); /* @@ -883,7 +931,16 @@ static int pci_pm_resume_noirq(struct device *dev) if (dev_pm_smart_suspend_and_suspended(dev)) pm_runtime_set_active(dev); - pci_pm_default_resume_early(pci_dev); + /* + * In the suspend-to-idle case, devices left in D0 during suspend will + * stay in D0, so it is not necessary to restore or update their + * configuration here and attempting to put them into D0 again is + * pointless, so avoid doing that. + */ + if (!(pci_dev->skip_bus_pm && pm_suspend_no_platform())) + pci_pm_default_resume_early(pci_dev); + + pci_fixup_device(pci_fixup_resume_early, pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); @@ -957,15 +1014,15 @@ static int pci_pm_freeze(struct device *dev) } /* - * This used to be done in pci_pm_prepare() for all devices and some - * drivers may depend on it, so do it here. Ideally, runtime-suspended - * devices should not be touched during freeze/thaw transitions, - * however. + * Resume all runtime-suspended devices before creating a snapshot + * image of system memory, because the restore kernel generally cannot + * be expected to always handle them consistently and they need to be + * put into the runtime-active metastate during system resume anyway, + * so it is better to ensure that the state saved in the image will be + * always consistent with that. */ - if (!dev_pm_smart_suspend_and_suspended(dev)) { - pm_runtime_resume(dev); - pci_dev->state_saved = false; - } + pm_runtime_resume(dev); + pci_dev->state_saved = false; if (pm->freeze) { int error; @@ -979,22 +1036,11 @@ static int pci_pm_freeze(struct device *dev) return 0; } -static int pci_pm_freeze_late(struct device *dev) -{ - if (dev_pm_smart_suspend_and_suspended(dev)) - return 0; - - return pm_generic_freeze_late(dev); -} - static int pci_pm_freeze_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); struct device_driver *drv = dev->driver; - if (dev_pm_smart_suspend_and_suspended(dev)) - return 0; - if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_suspend_late(dev, PMSG_FREEZE); @@ -1024,16 +1070,6 @@ static int pci_pm_thaw_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; - /* - * If the device is in runtime suspend, the code below may not work - * correctly with it, so skip that code and make the PM core skip all of - * the subsequent "thaw" callbacks for the device. - */ - if (dev_pm_smart_suspend_and_suspended(dev)) { - dev_pm_skip_next_resume_phases(dev); - return 0; - } - if (pcibios_pm_ops.thaw_noirq) { error = pcibios_pm_ops.thaw_noirq(dev); if (error) @@ -1093,10 +1129,13 @@ static int pci_pm_poweroff(struct device *dev) /* The reason to do that is the same as in pci_pm_suspend(). */ if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) || - !pci_dev_keep_suspended(pci_dev)) + pci_dev_need_resume(pci_dev)) { pm_runtime_resume(dev); + pci_dev->state_saved = false; + } else { + pci_dev_adjust_pme(pci_dev); + } - pci_dev->state_saved = false; if (pm->poweroff) { int error; @@ -1168,10 +1207,6 @@ static int pci_pm_restore_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; - /* This is analogous to the pci_pm_resume_noirq() case. */ - if (dev_pm_smart_suspend_and_suspended(dev)) - pm_runtime_set_active(dev); - if (pcibios_pm_ops.restore_noirq) { error = pcibios_pm_ops.restore_noirq(dev); if (error) @@ -1179,6 +1214,7 @@ static int pci_pm_restore_noirq(struct device *dev) } pci_pm_default_resume_early(pci_dev); + pci_fixup_device(pci_fixup_resume_early, pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); @@ -1220,7 +1256,6 @@ static int pci_pm_restore(struct device *dev) #else /* !CONFIG_HIBERNATE_CALLBACKS */ #define pci_pm_freeze NULL -#define pci_pm_freeze_late NULL #define pci_pm_freeze_noirq NULL #define pci_pm_thaw NULL #define pci_pm_thaw_noirq NULL @@ -1346,7 +1381,6 @@ static const struct dev_pm_ops pci_dev_pm_ops = { .suspend_late = pci_pm_suspend_late, .resume = pci_pm_resume, .freeze = pci_pm_freeze, - .freeze_late = pci_pm_freeze_late, .thaw = pci_pm_thaw, .poweroff = pci_pm_poweroff, .poweroff_late = pci_pm_poweroff_late, |