summaryrefslogtreecommitdiffstats
path: root/drivers/pci/probe.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/probe.c')
-rw-r--r--drivers/pci/probe.c187
1 files changed, 167 insertions, 20 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2e6292..5ed99309c758 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -6,6 +6,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/cpumask.h>
@@ -485,7 +486,7 @@ void pci_read_bridge_bases(struct pci_bus *child)
}
}
-static struct pci_bus *pci_alloc_bus(void)
+static struct pci_bus *pci_alloc_bus(struct pci_bus *parent)
{
struct pci_bus *b;
@@ -500,6 +501,10 @@ static struct pci_bus *pci_alloc_bus(void)
INIT_LIST_HEAD(&b->resources);
b->max_bus_speed = PCI_SPEED_UNKNOWN;
b->cur_bus_speed = PCI_SPEED_UNKNOWN;
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+ if (parent)
+ b->domain_nr = parent->domain_nr;
+#endif
return b;
}
@@ -671,7 +676,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
/*
* Allocate a new bus, and inherit stuff from the parent..
*/
- child = pci_alloc_bus();
+ child = pci_alloc_bus(parent);
if (!child)
return NULL;
@@ -740,6 +745,17 @@ struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
}
EXPORT_SYMBOL(pci_add_new_bus);
+static void pci_enable_crs(struct pci_dev *pdev)
+{
+ u16 root_cap = 0;
+
+ /* Enable CRS Software Visibility if supported */
+ pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap);
+ if (root_cap & PCI_EXP_RTCAP_CRSVIS)
+ pcie_capability_set_word(pdev, PCI_EXP_RTCTL,
+ PCI_EXP_RTCTL_CRSSVE);
+}
+
/*
* If it's a bridge, configure it and scan the bus behind it.
* For CardBus bridges, we don't scan behind as the devices will
@@ -775,7 +791,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
/* Check if setup is sensible at all */
if (!pass &&
(primary != bus->number || secondary <= bus->number ||
- secondary > subordinate || subordinate > bus->busn_res.end)) {
+ secondary > subordinate)) {
dev_info(&dev->dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
secondary, subordinate);
broken = 1;
@@ -787,6 +803,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
+ pci_enable_crs(dev);
+
if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
!is_cardbus && !broken) {
unsigned int cmax;
@@ -838,23 +856,18 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
goto out;
}
- if (max >= bus->busn_res.end) {
- dev_warn(&dev->dev, "can't allocate child bus %02x from %pR\n",
- max, &bus->busn_res);
- goto out;
- }
-
/* Clear errors */
pci_write_config_word(dev, PCI_STATUS, 0xffff);
- /* The bus will already exist if we are rescanning */
+ /* Prevent assigning a bus number that already exists.
+ * This can happen when a bridge is hot-plugged, so in
+ * this case we only re-scan this bus. */
child = pci_find_bus(pci_domain_nr(bus), max+1);
if (!child) {
child = pci_add_new_bus(bus, dev, max+1);
if (!child)
goto out;
- pci_bus_insert_busn_res(child, max+1,
- bus->busn_res.end);
+ pci_bus_insert_busn_res(child, max+1, 0xff);
}
max++;
buses = (buses & 0xff000000)
@@ -913,11 +926,6 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
/*
* Set the subordinate bus number to its real value.
*/
- if (max > bus->busn_res.end) {
- dev_warn(&dev->dev, "max busn %02x is outside %pR\n",
- max, &bus->busn_res);
- max = bus->busn_res.end;
- }
pci_bus_update_busn_res_end(child, max);
pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
}
@@ -1236,6 +1244,137 @@ int pci_setup_device(struct pci_dev *dev)
return 0;
}
+static struct hpp_type0 pci_default_type0 = {
+ .revision = 1,
+ .cache_line_size = 8,
+ .latency_timer = 0x40,
+ .enable_serr = 0,
+ .enable_perr = 0,
+};
+
+static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
+{
+ u16 pci_cmd, pci_bctl;
+
+ if (!hpp)
+ hpp = &pci_default_type0;
+
+ if (hpp->revision > 1) {
+ dev_warn(&dev->dev,
+ "PCI settings rev %d not supported; using defaults\n",
+ hpp->revision);
+ hpp = &pci_default_type0;
+ }
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
+ pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+ if (hpp->enable_serr)
+ pci_cmd |= PCI_COMMAND_SERR;
+ if (hpp->enable_perr)
+ pci_cmd |= PCI_COMMAND_PARITY;
+ pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+
+ /* Program bridge control value */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
+ hpp->latency_timer);
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
+ if (hpp->enable_serr)
+ pci_bctl |= PCI_BRIDGE_CTL_SERR;
+ if (hpp->enable_perr)
+ pci_bctl |= PCI_BRIDGE_CTL_PARITY;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
+ }
+}
+
+static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
+{
+ if (hpp)
+ dev_warn(&dev->dev, "PCI-X settings not supported\n");
+}
+
+static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
+{
+ int pos;
+ u32 reg32;
+
+ if (!hpp)
+ return;
+
+ if (hpp->revision > 1) {
+ dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
+ hpp->revision);
+ return;
+ }
+
+ /*
+ * Don't allow _HPX to change MPS or MRRS settings. We manage
+ * those to make sure they're consistent with the rest of the
+ * platform.
+ */
+ hpp->pci_exp_devctl_and |= PCI_EXP_DEVCTL_PAYLOAD |
+ PCI_EXP_DEVCTL_READRQ;
+ hpp->pci_exp_devctl_or &= ~(PCI_EXP_DEVCTL_PAYLOAD |
+ PCI_EXP_DEVCTL_READRQ);
+
+ /* Initialize Device Control Register */
+ pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
+ ~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or);
+
+ /* Initialize Link Control Register */
+ if (dev->subordinate)
+ pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL,
+ ~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or);
+
+ /* Find Advanced Error Reporting Enhanced Capability */
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (!pos)
+ return;
+
+ /* Initialize Uncorrectable Error Mask Register */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
+ reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
+
+ /* Initialize Uncorrectable Error Severity Register */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
+ reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
+
+ /* Initialize Correctable Error Mask Register */
+ pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
+ reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
+
+ /* Initialize Advanced Error Capabilities and Control Register */
+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
+ reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
+
+ /*
+ * FIXME: The following two registers are not supported yet.
+ *
+ * o Secondary Uncorrectable Error Severity Register
+ * o Secondary Uncorrectable Error Mask Register
+ */
+}
+
+static void pci_configure_device(struct pci_dev *dev)
+{
+ struct hotplug_params hpp;
+ int ret;
+
+ memset(&hpp, 0, sizeof(hpp));
+ ret = pci_get_hp_params(dev, &hpp);
+ if (ret)
+ return;
+
+ program_hpp_type2(dev, hpp.t2);
+ program_hpp_type1(dev, hpp.t1);
+ program_hpp_type0(dev, hpp.t0);
+}
+
static void pci_release_capabilities(struct pci_dev *dev)
{
pci_vpd_release(dev);
@@ -1292,8 +1431,13 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
*l == 0x0000ffff || *l == 0xffff0000)
return false;
- /* Configuration request Retry Status */
- while (*l == 0xffff0001) {
+ /*
+ * Configuration Request Retry Status. Some root ports return the
+ * actual device ID instead of the synthetic ID (0xFFFF) required
+ * by the PCIe spec. Ignore the device ID and only check for
+ * (vendor id == 1).
+ */
+ while ((*l & 0xffff) == 0x0001) {
if (!crs_timeout)
return false;
@@ -1373,6 +1517,8 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
int ret;
+ pci_configure_device(dev);
+
device_initialize(&dev->dev);
dev->dev.release = pci_release_dev;
@@ -1761,13 +1907,14 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
char bus_addr[64];
char *fmt;
- b = pci_alloc_bus();
+ b = pci_alloc_bus(NULL);
if (!b)
return NULL;
b->sysdata = sysdata;
b->ops = ops;
b->number = b->busn_res.start = bus;
+ pci_bus_assign_domain_nr(b, parent);
b2 = pci_find_bus(pci_domain_nr(b), bus);
if (b2) {
/* If we already got to this bus through a different bridge, ignore it */