summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/pinctrl-exynos.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/pinctrl-exynos.c')
-rw-r--r--drivers/pinctrl/pinctrl-exynos.c139
1 files changed, 136 insertions, 3 deletions
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index ac742817ebce..2d76f66a2e0b 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -196,6 +196,12 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
return IRQ_HANDLED;
}
+struct exynos_eint_gpio_save {
+ u32 eint_con;
+ u32 eint_fltcon0;
+ u32 eint_fltcon1;
+};
+
/*
* exynos_eint_gpio_init() - setup handling of external gpio interrupts.
* @d: driver data of samsung pinctrl driver.
@@ -204,8 +210,8 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
{
struct samsung_pin_bank *bank;
struct device *dev = d->dev;
- unsigned int ret;
- unsigned int i;
+ int ret;
+ int i;
if (!d->irq) {
dev_err(dev, "irq number not available\n");
@@ -227,11 +233,29 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
bank->nr_pins, &exynos_gpio_irqd_ops, bank);
if (!bank->irq_domain) {
dev_err(dev, "gpio irq domain add failed\n");
- return -ENXIO;
+ ret = -ENXIO;
+ goto err_domains;
+ }
+
+ bank->soc_priv = devm_kzalloc(d->dev,
+ sizeof(struct exynos_eint_gpio_save), GFP_KERNEL);
+ if (!bank->soc_priv) {
+ irq_domain_remove(bank->irq_domain);
+ ret = -ENOMEM;
+ goto err_domains;
}
}
return 0;
+
+err_domains:
+ for (--i, --bank; i >= 0; --i, --bank) {
+ if (bank->eint_type != EINT_TYPE_GPIO)
+ continue;
+ irq_domain_remove(bank->irq_domain);
+ }
+
+ return ret;
}
static void exynos_wkup_irq_unmask(struct irq_data *irqd)
@@ -326,6 +350,28 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
return 0;
}
+static u32 exynos_eint_wake_mask = 0xffffffff;
+
+u32 exynos_get_eint_wake_mask(void)
+{
+ return exynos_eint_wake_mask;
+}
+
+static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+ unsigned long bit = 1UL << (2 * bank->eint_offset + irqd->hwirq);
+
+ pr_info("wake %s for irq %d\n", on ? "enabled" : "disabled", irqd->irq);
+
+ if (!on)
+ exynos_eint_wake_mask |= bit;
+ else
+ exynos_eint_wake_mask &= ~bit;
+
+ return 0;
+}
+
/*
* irq_chip for wakeup interrupts
*/
@@ -335,6 +381,7 @@ static struct irq_chip exynos_wkup_irq_chip = {
.irq_mask = exynos_wkup_irq_mask,
.irq_ack = exynos_wkup_irq_ack,
.irq_set_type = exynos_wkup_irq_set_type,
+ .irq_set_wake = exynos_wkup_irq_set_wake,
};
/* interrupt handler for wakeup interrupts 0..15 */
@@ -505,6 +552,72 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
return 0;
}
+static void exynos_pinctrl_suspend_bank(
+ struct samsung_pinctrl_drv_data *drvdata,
+ struct samsung_pin_bank *bank)
+{
+ struct exynos_eint_gpio_save *save = bank->soc_priv;
+ void __iomem *regs = drvdata->virt_base;
+
+ save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET
+ + bank->eint_offset);
+ save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset);
+ save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset + 4);
+
+ pr_debug("%s: save con %#010x\n", bank->name, save->eint_con);
+ pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0);
+ pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1);
+}
+
+static void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
+{
+ struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
+ struct samsung_pin_bank *bank = ctrl->pin_banks;
+ int i;
+
+ for (i = 0; i < ctrl->nr_banks; ++i, ++bank)
+ if (bank->eint_type == EINT_TYPE_GPIO)
+ exynos_pinctrl_suspend_bank(drvdata, bank);
+}
+
+static void exynos_pinctrl_resume_bank(
+ struct samsung_pinctrl_drv_data *drvdata,
+ struct samsung_pin_bank *bank)
+{
+ struct exynos_eint_gpio_save *save = bank->soc_priv;
+ void __iomem *regs = drvdata->virt_base;
+
+ pr_debug("%s: con %#010x => %#010x\n", bank->name,
+ readl(regs + EXYNOS_GPIO_ECON_OFFSET
+ + bank->eint_offset), save->eint_con);
+ pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name,
+ readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset), save->eint_fltcon0);
+ pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name,
+ readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset + 4), save->eint_fltcon1);
+
+ writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET
+ + bank->eint_offset);
+ writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset);
+ writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset + 4);
+}
+
+static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
+{
+ struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
+ struct samsung_pin_bank *bank = ctrl->pin_banks;
+ int i;
+
+ for (i = 0; i < ctrl->nr_banks; ++i, ++bank)
+ if (bank->eint_type == EINT_TYPE_GPIO)
+ exynos_pinctrl_resume_bank(drvdata, bank);
+}
+
/* pin banks of exynos4210 pin-controller 0 */
static struct samsung_pin_bank exynos4210_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
@@ -568,6 +681,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos4210-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
@@ -582,6 +697,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos4210-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
@@ -663,6 +780,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = {
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos4x12-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
@@ -677,6 +796,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = {
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos4x12-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
@@ -687,6 +808,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = {
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos4x12-gpio-ctrl2",
}, {
/* pin-controller instance 3 data */
@@ -697,6 +820,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = {
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos4x12-gpio-ctrl3",
},
};
@@ -775,6 +900,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos5250-gpio-ctrl0",
}, {
/* pin-controller instance 1 data */
@@ -785,6 +912,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos5250-gpio-ctrl1",
}, {
/* pin-controller instance 2 data */
@@ -795,6 +924,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos5250-gpio-ctrl2",
}, {
/* pin-controller instance 3 data */
@@ -805,6 +936,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
.svc = EXYNOS_SVC_OFFSET,
.eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
.label = "exynos5250-gpio-ctrl3",
},
};