summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c41
1 files changed, 22 insertions, 19 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b38f99f3be32..9598fdcb08ab 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2011 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -2704,16 +2704,14 @@ lpfc_offline_prep(struct lpfc_hba * phba)
}
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
-
+ spin_unlock_irq(shost->host_lock);
/*
* Whenever an SLI4 port goes offline, free the
- * RPI. A new RPI when the adapter port comes
- * back online.
+ * RPI. Get a new RPI when the adapter port
+ * comes back online.
*/
if (phba->sli_rev == LPFC_SLI_REV4)
lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
-
- spin_unlock_irq(shost->host_lock);
lpfc_unreg_rpi(vports[i], ndlp);
}
}
@@ -2786,9 +2784,13 @@ lpfc_scsi_buf_update(struct lpfc_hba *phba)
spin_lock_irq(&phba->hbalock);
spin_lock(&phba->scsi_buf_list_lock);
- list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list)
+ list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
sb->cur_iocbq.sli4_xritag =
phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag];
+ set_bit(sb->cur_iocbq.sli4_lxritag, phba->sli4_hba.xri_bmask);
+ phba->sli4_hba.max_cfg_param.xri_used++;
+ phba->sli4_hba.xri_count++;
+ }
spin_unlock(&phba->scsi_buf_list_lock);
spin_unlock_irq(&phba->hbalock);
return 0;
@@ -3723,6 +3725,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
break;
case LPFC_FIP_EVENT_TYPE_FCF_DEAD:
+ phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
"2549 FCF (x%x) disconnected from network, "
"tag:x%x\n", acqe_fip->index, acqe_fip->event_tag);
@@ -3784,6 +3787,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
}
break;
case LPFC_FIP_EVENT_TYPE_CVL:
+ phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
"2718 Clear Virtual Link Received for VPI 0x%x"
" tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
@@ -5226,8 +5230,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
* rpi is normalized to a zero base because the physical rpi is
* port based.
*/
- curr_rpi_range = phba->sli4_hba.next_rpi -
- phba->sli4_hba.max_cfg_param.rpi_base;
+ curr_rpi_range = phba->sli4_hba.next_rpi;
spin_unlock_irq(&phba->hbalock);
/*
@@ -5818,10 +5821,9 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
readl(phba->sli4_hba.u.if_type2.
ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2888 Port Error Detected "
- "during POST: "
- "port status reg 0x%x, "
- "port_smphr reg 0x%x, "
+ "2888 Unrecoverable port error "
+ "following POST: port status reg "
+ "0x%x, port_smphr reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
reg_data.word0,
portsmphr_reg.word0,
@@ -6142,7 +6144,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
- phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
(phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
@@ -7231,6 +7232,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
uint32_t rdy_chk, num_resets = 0, reset_again = 0;
union lpfc_sli4_cfg_shdr *shdr;
struct lpfc_register reg_data;
+ uint16_t devid;
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
switch (if_type) {
@@ -7277,7 +7279,9 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
LPFC_SLIPORT_INIT_PORT);
writel(reg_data.word0, phba->sli4_hba.u.if_type2.
CTRLregaddr);
-
+ /* flush */
+ pci_read_config_word(phba->pcidev,
+ PCI_DEVICE_ID, &devid);
/*
* Poll the Port Status Register and wait for RDY for
* up to 10 seconds. If the port doesn't respond, treat
@@ -7315,11 +7319,10 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
phba->work_status[1] = readl(
phba->sli4_hba.u.if_type2.ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2890 Port Error Detected "
- "during Port Reset: "
- "port status reg 0x%x, "
+ "2890 Port error detected during port "
+ "reset(%d): port status reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
- reg_data.word0,
+ num_resets, reg_data.word0,
phba->work_status[0],
phba->work_status[1]);
rc = -ENODEV;