2 files changed, 8 insertions, 22 deletions

diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index bf9f7f7ba354..c11e5ce6865e 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -2797,7 +2797,7 @@ mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[])
 	// available within 1 second, assume FW is initializing and wait
 	// for an extended amount of time
 	if (mbox->numstatus == 0xFF) {	// status not yet available
-		udelay(25);;
+		udelay(25);
 
 		for (i = 0; mbox->numstatus == 0xFF && i < 1000; i++) {
 			rmb();
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 4f39dd01936d..39729460b00e 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -772,8 +772,6 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
 		goto out_return_cmd;
 
 	cmd->scmd = scmd;
-	scmd->SCp.ptr = (char *)cmd;
-	scmd->SCp.sent_command = jiffies;
 
 	/*
 	 * Issue the command to the FW
@@ -804,6 +802,12 @@ static int megasas_slave_configure(struct scsi_device *sdev)
 	 */
 	if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
 		return -ENXIO;
+
+	/*
+	 * The RAID firmware may require extended timeouts.
+	 */
+	if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS)
+		sdev->timeout = 90 * HZ;
 	return 0;
 }
 
@@ -875,23 +879,6 @@ static int megasas_generic_reset(struct scsi_cmnd *scmd)
 	return ret_val;
 }
 
-static enum scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
-{
-	unsigned long seconds;
-
-	if (scmd->SCp.ptr) {
-		seconds = (jiffies - scmd->SCp.sent_command) / HZ;
-
-		if (seconds < 90) {
-			return EH_RESET_TIMER;
-		} else {
-			return EH_NOT_HANDLED;
-		}
-	}
-
-	return EH_HANDLED;
-}
-
 /**
  * megasas_reset_device -	Device reset handler entry point
  */
@@ -915,7 +902,7 @@ static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
 	int ret;
 
 	/*
-	 * Frist wait for all commands to complete
+	 * First wait for all commands to complete
 	 */
 	ret = megasas_generic_reset(scmd);
 
@@ -962,7 +949,6 @@ static struct scsi_host_template megasas_template = {
 	.eh_device_reset_handler = megasas_reset_device,
 	.eh_bus_reset_handler = megasas_reset_bus_host,
 	.eh_host_reset_handler = megasas_reset_bus_host,
-	.eh_timed_out = megasas_reset_timer,
 	.use_clustering = ENABLE_CLUSTERING,
 };