diff options
Diffstat (limited to 'drivers/staging/rtl8187se/r8180_rtl8225.c')
-rw-r--r-- | drivers/staging/rtl8187se/r8180_rtl8225.c | 933 |
1 files changed, 0 insertions, 933 deletions
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.c b/drivers/staging/rtl8187se/r8180_rtl8225.c deleted file mode 100644 index 96ed029ed64a..000000000000 --- a/drivers/staging/rtl8187se/r8180_rtl8225.c +++ /dev/null @@ -1,933 +0,0 @@ -/* - This is part of the rtl8180-sa2400 driver - released under the GPL (See file COPYING for details). - Copyright (c) 2005 Andrea Merello <andreamrl@tiscali.it> - - This files contains programming code for the rtl8225 - radio frontend. - - *Many* thanks to Realtek Corp. for their great support! - -*/ - - - -#include "r8180_hw.h" -#include "r8180_rtl8225.h" - - -u8 rtl8225_gain[]={ - 0x23,0x88,0x7c,0xa5,// -82dbm - 0x23,0x88,0x7c,0xb5,// -82dbm - 0x23,0x88,0x7c,0xc5,// -82dbm - 0x33,0x80,0x79,0xc5,// -78dbm - 0x43,0x78,0x76,0xc5,// -74dbm - 0x53,0x60,0x73,0xc5,// -70dbm - 0x63,0x58,0x70,0xc5,// -66dbm -}; - -#if 0 -u8 rtl8225_init_gain[]={ - //0x00,0x00,0x00,0x00,//0x00,0x00,0x00,0x00, - 0x33,0x80,0x6c,0xc5,//0x00,0x49,0x06,0xb5,//Gain = 0 ~ -78dbm - 0x43,0x78,0x69,0xc5,//0x00,0x45,0x06,0xb1,//Gain = 1 ~ -74dbm - 0x53,0x60,0x66,0xc5,//0x00,0x41,0x06,0xab,//Gain = 2 ~ -70dbm - 0x63,0x58,0x63,0xc5,//0x00,0x3d,0x06,0xa5,//Gain = 3 ~ -66dbm - 0x73,0x50,0x62,0xc5,//0x00,0x39,0x06,0xa1,//Gain = 4 ~ -62dbm - 0x83,0x43,0x61,0xc5,//0x00,0x35,0x06,0x9b,//Gain = 5 ~ -58dbm - 0x93,0x38,0x5a,0xc5,//0x00,0x31,0x06,0x99,//Gain = 6 ~ -54dbm -}; -#endif -#ifdef CONFIG_RTL818X_S -u32 rtl8225_chan[] ={ - 0, - 0x0080, //ch1 - 0x0100, //ch2 - 0x0180, //ch3 - 0x0200, //ch4 - 0x0280, - 0x0300, - 0x0380, - 0x0400, - 0x0480, - 0x0500, - 0x0580, - 0x0600, - 0x0680, - 0x074A, //ch14 -}; -#else -u32 rtl8225_chan[] = { - 0, //dummy channel 0 - 0x085c, //1 - 0x08dc, //2 - 0x095c, //3 - 0x09dc, //4 - 0x0a5c, //5 - 0x0adc, //6 - 0x0b5c, //7 - 0x0bdc, //8 - 0x0c5c, //9 - 0x0cdc, //10 - 0x0d5c, //11 - 0x0ddc, //12 - 0x0e5c, //13 - //0x0f5c, //14 - 0x0f72, // 14 -}; -#endif - -u16 rtl8225bcd_rxgain[]={ - 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, - 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, - 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, - 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, - 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, - 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, - 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, - 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, - 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d, - 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9, - 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3, - 0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb - -}; - - -#if 0 -u16 rtl8225bc_rxgain[]={ - 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, - 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, - 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, - 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, - 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, - 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, - 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, - 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, - 0x0794, 0x0795, 0x0798, 0x0799, 0x039a, 0x039b, 0x039c, 0x039d, - 0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9, - 0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3, - 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb - -}; - - -u16 rtl8225a_rxgain[]={ - 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, - 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, - 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, - 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, - 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, - 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, - 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, - 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, - 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d, - 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9, - 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad, - 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad -}; -#endif - -u8 rtl8225_agc[]={ - 0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9d,0x9c,0x9b,0x9a,0x99,0x98,0x97,0x96, - 0x95,0x94,0x93,0x92,0x91,0x90,0x8f,0x8e,0x8d,0x8c,0x8b,0x8a,0x89,0x88,0x87,0x86, - 0x85,0x84,0x83,0x82,0x81,0x80,0x3f,0x3e,0x3d,0x3c,0x3b,0x3a,0x39,0x38,0x37,0x36, - 0x35,0x34,0x33,0x32,0x31,0x30,0x2f,0x2e,0x2d,0x2c,0x2b,0x2a,0x29,0x28,0x27,0x26, - 0x25,0x24,0x23,0x22,0x21,0x20,0x1f,0x1e,0x1d,0x1c,0x1b,0x1a,0x19,0x18,0x17,0x16, - 0x15,0x14,0x13,0x12,0x11,0x10,0x0f,0x0e,0x0d,0x0c,0x0b,0x0a,0x09,0x08,0x07,0x06, - 0x05,0x04,0x03,0x02,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, - 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, -}; - - -u8 rtl8225_tx_gain_cck_ofdm[]={ - 0x02,0x06,0x0e,0x1e,0x3e,0x7e -}; - - -u8 rtl8225_tx_power_ofdm[]={ - 0x80,0x90,0xa2,0xb5,0xcb,0xe4 -}; - - -u8 rtl8225_tx_power_cck_ch14[]={ - 0x18,0x17,0x15,0x0c,0x00,0x00,0x00,0x00, - 0x1b,0x1a,0x17,0x0e,0x00,0x00,0x00,0x00, - 0x1f,0x1e,0x1a,0x0f,0x00,0x00,0x00,0x00, - 0x22,0x21,0x1d,0x11,0x00,0x00,0x00,0x00, - 0x26,0x25,0x21,0x13,0x00,0x00,0x00,0x00, - 0x2b,0x2a,0x25,0x15,0x00,0x00,0x00,0x00 -}; - - -u8 rtl8225_tx_power_cck[]={ - 0x18,0x17,0x15,0x11,0x0c,0x08,0x04,0x02, - 0x1b,0x1a,0x17,0x13,0x0e,0x09,0x04,0x02, - 0x1f,0x1e,0x1a,0x15,0x10,0x0a,0x05,0x02, - 0x22,0x21,0x1d,0x18,0x11,0x0b,0x06,0x02, - 0x26,0x25,0x21,0x1b,0x14,0x0d,0x06,0x03, - 0x2b,0x2a,0x25,0x1e,0x16,0x0e,0x07,0x03 -}; - - -void rtl8225_set_gain(struct net_device *dev, short gain) -{ - write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]); - write_phy_ofdm(dev, 0x23, rtl8225_gain[gain * 4 + 1]); - write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]); - write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]); -} -#if 0 - -void rtl8225_set_gain(struct net_device *dev, short gain) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); - - if(priv->card_8185 == 2) - write_phy_ofdm(dev, 0x21, 0x27); - else - write_phy_ofdm(dev, 0x21, 0x37); - - write_phy_ofdm(dev, 0x25, 0x20); - write_phy_ofdm(dev, 0x11, 0x6); - - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_ofdm(dev, 0x27, 0x8); - else - write_phy_ofdm(dev, 0x27, 0x88); - - write_phy_ofdm(dev, 0x14, 0); - write_phy_ofdm(dev, 0x16, 0); - write_phy_ofdm(dev, 0x15, 0x40); - write_phy_ofdm(dev, 0x17, 0x40); - - write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]); - write_phy_ofdm(dev, 0x23, rtl8225_gain[gain * 4 + 1]); - write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]); - write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]); - //rtl8225_set_gain_usb(dev, gain); -} -#endif - - -void write_rtl8225(struct net_device *dev, u8 adr, u16 data) -{ - int i; - u16 out,select; - u8 bit; - u32 bangdata = (data << 4) | (adr & 0xf); - struct r8180_priv *priv = ieee80211_priv(dev); - - out = read_nic_word(dev, RFPinsOutput) & 0xfff3; - - write_nic_word(dev,RFPinsEnable, - (read_nic_word(dev,RFPinsEnable) | 0x7)); - - select = read_nic_word(dev, RFPinsSelect); - - write_nic_word(dev, RFPinsSelect, select | 0x7 | - ((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO)); - - force_pci_posting(dev); - udelay(10); - - write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN );//| 0x1fff); - - force_pci_posting(dev); - udelay(2); - - write_nic_word(dev, RFPinsOutput, out); - - force_pci_posting(dev); - udelay(10); - - - for(i=15; i>=0;i--){ - - bit = (bangdata & (1<<i)) >> i; - - write_nic_word(dev, RFPinsOutput, bit | out); - - write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); - write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); - - i--; - bit = (bangdata & (1<<i)) >> i; - - write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); - write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); - - write_nic_word(dev, RFPinsOutput, bit | out); - - } - - write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN); - - force_pci_posting(dev); - udelay(10); - - write_nic_word(dev, RFPinsOutput, out | - ((priv->card_type == USB) ? 4 : BB_HOST_BANG_EN)); - - write_nic_word(dev, RFPinsSelect, select | - ((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO)); - - if(priv->card_type == USB) - mdelay(2); - else - rtl8185_rf_pins_enable(dev); -} - -void rtl8225_rf_close(struct net_device *dev) -{ - write_rtl8225(dev, 0x4, 0x1f); - - force_pci_posting(dev); - mdelay(1); - - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_OFF); - rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_OFF); -} - -void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - - int GainIdx; - int GainSetting; - int i; - u8 power; - u8 *cck_power_table; - u8 max_cck_power_level; - u8 max_ofdm_power_level; - u8 min_ofdm_power_level; - u8 cck_power_level = 0xff & priv->chtxpwr[ch]; - u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch]; - - if(priv->card_type == USB){ - max_cck_power_level = 11; - max_ofdm_power_level = 25; // 12 -> 25 - min_ofdm_power_level = 10; - }else{ - max_cck_power_level = 35; - max_ofdm_power_level = 35; - min_ofdm_power_level = 0; - } - /* CCK power setting */ - if(cck_power_level > max_cck_power_level) - cck_power_level = max_cck_power_level; - GainIdx=cck_power_level % 6; - GainSetting=cck_power_level / 6; - - if(ch == 14) - cck_power_table = rtl8225_tx_power_cck_ch14; - else - cck_power_table = rtl8225_tx_power_cck; - -// if(priv->card_8185 == 1 && priv->card_8185_Bversion ){ - /*Ver B*/ -// write_nic_byte(dev, TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[GainSetting]); -// }else{ - /*Ver C - D */ - write_nic_byte(dev, TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[GainSetting]>>1); -// } - - for(i=0;i<8;i++){ - - power = cck_power_table[GainIdx * 8 + i]; - write_phy_cck(dev, 0x44 + i, power); - } - - /* FIXME Is this delay really needeed ? */ - force_pci_posting(dev); - mdelay(1); - - /* OFDM power setting */ -// Old: -// if(ofdm_power_level > max_ofdm_power_level) -// ofdm_power_level = 35; -// ofdm_power_level += min_ofdm_power_level; -// Latest: - if(ofdm_power_level > (max_ofdm_power_level - min_ofdm_power_level)) - ofdm_power_level = max_ofdm_power_level; - else - ofdm_power_level += min_ofdm_power_level; - if(ofdm_power_level > 35) - ofdm_power_level = 35; -// - - GainIdx=ofdm_power_level % 6; - GainSetting=ofdm_power_level / 6; -#if 1 -// if(priv->card_type == USB){ - rtl8185_set_anaparam2(dev,RTL8225_ANAPARAM2_ON); - - write_phy_ofdm(dev,2,0x42); - write_phy_ofdm(dev,6,0); - write_phy_ofdm(dev,8,0); -// } -#endif -// if(priv->card_8185 == 1 && priv->card_8185_Bversion){ -// /*Ver B*/ -// write_nic_byte(dev, TX_GAIN_OFDM, rtl8225_tx_gain_cck_ofdm[GainSetting]); -// }else{ - /*Ver C - D */ - write_nic_byte(dev, TX_GAIN_OFDM, rtl8225_tx_gain_cck_ofdm[GainSetting]>>1); -// } - - - power = rtl8225_tx_power_ofdm[GainIdx]; - - write_phy_ofdm(dev, 0x5, power); - write_phy_ofdm(dev, 0x7, power); - - force_pci_posting(dev); - mdelay(1); - //write_nic_byte(dev, TX_AGC_CONTROL,4); -} -#if 0 -/* switch between mode B and G */ -void rtl8225_set_mode(struct net_device *dev, short modeb) -{ - write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40)); - write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40)); -} -#endif -void rtl8225_rf_set_chan(struct net_device *dev, short ch) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - short gset = (priv->ieee80211->state == IEEE80211_LINKED && - ieee80211_is_54g(priv->ieee80211->current_network)) || - priv->ieee80211->iw_mode == IW_MODE_MONITOR; - - rtl8225_SetTXPowerLevel(dev, ch); - - write_rtl8225(dev, 0x7, rtl8225_chan[ch]); - - force_pci_posting(dev); - mdelay(10); - - // A mode sifs 0x44, difs 34-14, slot 9, eifs 23, cwm 3, cwM 7, ctstoself 0x10 - if(gset){ - write_nic_byte(dev,SIFS,0x22);// SIFS: 0x22 - write_nic_byte(dev,DIFS,0x14); //DIFS: 20 - //write_nic_byte(dev,DIFS,20); //DIFS: 20 - }else{ - write_nic_byte(dev,SIFS,0x44);// SIFS: 0x22 - write_nic_byte(dev,DIFS,50 - 14); //DIFS: 36 - } - if(priv->ieee80211->state == IEEE80211_LINKED && - ieee80211_is_shortslot(priv->ieee80211->current_network)) - write_nic_byte(dev,SLOT,0x9); //SLOT: 9 - - else - write_nic_byte(dev,SLOT,0x14); //SLOT: 20 (0x14) - - - if(gset){ - write_nic_byte(dev,EIFS,81);//91 - 20); // EIFS: 91 (0x5B) - write_nic_byte(dev,CW_VAL,0x73); //CW VALUE: 0x37 - //DMESG("using G net params"); - }else{ - write_nic_byte(dev,EIFS,81); // EIFS: 91 (0x5B) - write_nic_byte(dev,CW_VAL,0xa5); //CW VALUE: 0x37 - //DMESG("using B net params"); - } - - -} - -void rtl8225_host_pci_init(struct net_device *dev) -{ - write_nic_word(dev, RFPinsOutput, 0x480); - - rtl8185_rf_pins_enable(dev); - - //if(priv->card_8185 == 2 && priv->enable_gpio0 ) /* version D */ - //write_nic_word(dev, RFPinsSelect, 0x88); - //else - write_nic_word(dev, RFPinsSelect, 0x88 | SW_CONTROL_GPIO); /* 0x488 | SW_CONTROL_GPIO */ - - write_nic_byte(dev, GP_ENABLE, 0); - - force_pci_posting(dev); - mdelay(200); - - write_nic_word(dev, GP_ENABLE, 0xff & (~(1<<6))); /* bit 6 is for RF on/off detection */ - - -} - -void rtl8225_host_usb_init(struct net_device *dev) -{ - #if 0 - write_nic_byte(dev,RFPinsSelect+1,0); - - write_nic_byte(dev,GPIO,0); - - write_nic_byte_E(dev,0x53,read_nic_byte_E(dev,0x53) | (1<<7)); - - write_nic_byte(dev,RFPinsSelect+1,4); - - write_nic_byte(dev,GPIO,0x20); - - write_nic_byte(dev,GP_ENABLE,0); - - - /* Config BB & RF */ - write_nic_word(dev, RFPinsOutput, 0x80); - - write_nic_word(dev, RFPinsSelect, 0x80); - - write_nic_word(dev, RFPinsEnable, 0x80); - - - mdelay(100); - - mdelay(1000); -#endif - -} - -void rtl8225_rf_sleep(struct net_device *dev) -{ - write_rtl8225(dev,0x4,0xdff); - force_pci_posting(dev); - mdelay(1); - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_SLEEP); - rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_SLEEP); - force_pci_posting(dev); -} - -void rtl8225_rf_wakeup(struct net_device *dev) -{ - write_rtl8225(dev,0x4,0x9ff); - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); - rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON); - force_pci_posting(dev); -} - -void rtl8225_rf_init(struct net_device *dev) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - int i; - short channel = 1; - u16 brsr; - - priv->chan = channel; - - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); - - - if(priv->card_type == USB) - rtl8225_host_usb_init(dev); - else - rtl8225_host_pci_init(dev); - - write_nic_dword(dev, RF_TIMING, 0x000a8008); - - brsr = read_nic_word(dev, BRSR); - - write_nic_word(dev, BRSR, 0xffff); - - #if 0 - if(priv->card_8185 == 1){/* version C or B */ - if(priv->card_8185_Bversion) /* version B*/ - write_nic_dword(dev, RF_PARA, 0x44); - else /* version C */ - write_nic_dword(dev, RF_PARA, 0x100044); - }else{ /* version D */ - if(priv->enable_gpio0) - write_nic_dword(dev, RF_PARA, 0x20100044); - else /* also USB */ - write_nic_dword(dev, RF_PARA, 0x100044); - } - #endif - - write_nic_dword(dev, RF_PARA, 0x100044); - - #if 1 //0->1 - rtl8180_set_mode(dev, EPROM_CMD_CONFIG); - write_nic_byte(dev, CONFIG3, 0x44); - rtl8180_set_mode(dev, EPROM_CMD_NORMAL); - #endif - - if(priv->card_type == USB){ - rtl8185_rf_pins_enable(dev); - - mdelay(1000); - } - - write_rtl8225(dev, 0x0, 0x67); mdelay(1); - - - write_rtl8225(dev, 0x1, 0xfe0); mdelay(1); - - write_rtl8225(dev, 0x2, 0x44d); mdelay(1); - - write_rtl8225(dev, 0x3, 0x441); mdelay(1); - - if(priv->card_type == USB) - write_rtl8225(dev, 0x4, 0x486); - else - write_rtl8225(dev, 0x4, 0x8be); - - mdelay(1); - - - #if 0 - }else if(priv->phy_ver == 1){ - /* version A */ - write_rtl8225(dev, 0x5, 0xbc0 + 2); - }else{ - #endif - /* version B & C */ - - if(priv->card_type == USB) - write_rtl8225(dev, 0x5, 0xbc0); - else if(priv->card_type == MINIPCI) - write_rtl8225(dev, 0x5, 0xbc0 + 3 +(6<<3)); - else - write_rtl8225(dev, 0x5, 0xbc0 + (6<<3)); - - mdelay(1); -// } - - write_rtl8225(dev, 0x6, 0xae6); mdelay(1); - - write_rtl8225(dev, 0x7, ((priv->card_type == USB)? 0x82a : rtl8225_chan[channel])); mdelay(1); - - write_rtl8225(dev, 0x8, 0x1f); mdelay(1); - - write_rtl8225(dev, 0x9, 0x334); mdelay(1); - - write_rtl8225(dev, 0xa, 0xfd4); mdelay(1); - - write_rtl8225(dev, 0xb, 0x391); mdelay(1); - - write_rtl8225(dev, 0xc, 0x50); mdelay(1); - - - write_rtl8225(dev, 0xd, 0x6db); mdelay(1); - - write_rtl8225(dev, 0xe, 0x29); mdelay(1); - - write_rtl8225(dev, 0xf, 0x914); - - if(priv->card_type == USB){ - //force_pci_posting(dev); - mdelay(100); - } - - write_rtl8225(dev, 0x2, 0xc4d); - - if(priv->card_type == USB){ - // force_pci_posting(dev); - mdelay(200); - - write_rtl8225(dev, 0x2, 0x44d); - - // force_pci_posting(dev); - mdelay(100); - - }//End of if(priv->card_type == USB) - /* FIXME!! rtl8187 we have to check if calibrarion - * is successful and eventually cal. again (repeat - * the two write on reg 2) - */ - force_pci_posting(dev); - - mdelay(100); //200 for 8187 - - //if(priv->card_type != USB) /* maybe not needed even for 8185 */ -// write_rtl8225(dev, 0x7, rtl8225_chan[channel]); - - write_rtl8225(dev, 0x0, 0x127); - - for(i=0;i<95;i++){ - write_rtl8225(dev, 0x1, (u8)(i+1)); - - #if 0 - if(priv->phy_ver == 1) - /* version A */ - write_rtl8225(dev, 0x2, rtl8225a_rxgain[i]); - else - #endif - /* version B & C & D*/ - - write_rtl8225(dev, 0x2, rtl8225bcd_rxgain[i]); - } - - write_rtl8225(dev, 0x0, 0x27); - - -// //if(priv->card_type != USB){ -// write_rtl8225(dev, 0x2, 0x44d); -// write_rtl8225(dev, 0x7, rtl8225_chan[channel]); -// write_rtl8225(dev, 0x2, 0x47d); -// -// force_pci_posting(dev); -// mdelay(100); -// -// write_rtl8225(dev, 0x2, 0x44d); -// //} - - write_rtl8225(dev, 0x0, 0x22f); - - if(priv->card_type != USB) - rtl8185_rf_pins_enable(dev); - - for(i=0;i<128;i++){ - write_phy_ofdm(dev, 0xb, rtl8225_agc[i]); - - mdelay(1); - write_phy_ofdm(dev, 0xa, (u8)i+ 0x80); - - mdelay(1); - } - - force_pci_posting(dev); - mdelay(1); - - write_phy_ofdm(dev, 0x0, 0x1); mdelay(1); - write_phy_ofdm(dev, 0x1, 0x2); mdelay(1); - write_phy_ofdm(dev, 0x2, ((priv->card_type == USB)? 0x42 : 0x62)); mdelay(1); - write_phy_ofdm(dev, 0x3, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x4, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x5, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x6, 0x40); mdelay(1); - write_phy_ofdm(dev, 0x7, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x8, 0x40); mdelay(1); - write_phy_ofdm(dev, 0x9, 0xfe); mdelay(1); - - #if 0 - if(priv->card_type == USB){ - write_phy_ofdm(dev, 0xa, 0x9); - }else{ - if(priv->card_8185 == 1 && priv->card_8185_Bversion){ - /* Ver B - * maybe later version can accept this also? - */ - write_phy_ofdm(dev, 0xa, 0x6); - write_phy_ofdm(dev, 0x18, 0x6f); - }else{ - #endif - /* ver C & D */ - write_phy_ofdm(dev, 0xa, 0x9); mdelay(1); - - //write_phy_ofdm(dev, 0x18, 0xef); - // } - //} - write_phy_ofdm(dev, 0xb, 0x80); mdelay(1); - - write_phy_ofdm(dev, 0xc, 0x1);mdelay(1); - - - //if(priv->card_type != USB) - //write_phy_ofdm(dev, 0xd, 0x33); // <> - - write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1); - - - #if 0 - if(priv->card_8185 == 1){ - if(priv->card_8185_Bversion) - write_phy_ofdm(dev, 0xf, 0x20);/*ver B*/ - else - write_phy_ofdm(dev, 0xf, 0x28);/*ver C*/ - }else{ - #endif - write_phy_ofdm(dev, 0xf, 0x38);mdelay(1); -/*ver D & 8187*/ -// } - -// if(priv->card_8185 == 1 && priv->card_8185_Bversion) -// write_phy_ofdm(dev, 0x10, 0x04);/*ver B*/ -// else - write_phy_ofdm(dev, 0x10, 0x84);mdelay(1); -/*ver C & D & 8187*/ - - write_phy_ofdm(dev, 0x11, 0x06);mdelay(1); -/*agc resp time 700*/ - - -// if(priv->card_8185 == 2){ - /* Ver D & 8187*/ - write_phy_ofdm(dev, 0x12, 0x20);mdelay(1); - - write_phy_ofdm(dev, 0x13, 0x20);mdelay(1); - -#if 0 - }else{ - /* Ver B & C*/ - write_phy_ofdm(dev, 0x12, 0x0); - write_phy_ofdm(dev, 0x13, 0x0); - } -#endif - write_phy_ofdm(dev, 0x14, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x15, 0x40); mdelay(1); - write_phy_ofdm(dev, 0x16, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x17, 0x40); mdelay(1); - -// if (priv->card_type == USB) -// write_phy_ofdm(dev, 0x18, 0xef); - - write_phy_ofdm(dev, 0x18, 0xef);mdelay(1); - - - write_phy_ofdm(dev, 0x19, 0x19); mdelay(1); - write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1); - -// if (priv->card_type != USB){ -// if(priv->card_8185 == 1 && priv->card_8185_Bversion) -// write_phy_ofdm(dev, 0x1b, 0x66); /* Ver B */ -// else - write_phy_ofdm(dev, 0x1b, 0x76);mdelay(1); - /* Ver C & D */ //FIXME:MAYBE not needed -// } - - write_phy_ofdm(dev, 0x1c, 0x4);mdelay(1); - -#if 0 - if(priv->card_8185 == 1){ - if(priv->card_8185_Bversion){ - /*ver B*/ - write_phy_ofdm(dev, 0x1e, 0x95); - write_phy_ofdm(dev, 0x1f, 0x55); - }else{ - /*ver C*/ - write_phy_ofdm(dev, 0x1e, 0x90); - write_phy_ofdm(dev, 0x1f, 0x34); - - } - }else{ -#endif - /*ver D & 8187*/ - write_phy_ofdm(dev, 0x1e, 0x95);mdelay(1); - - write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1); - -// } - - write_phy_ofdm(dev, 0x20, 0x1f);mdelay(1); - - write_phy_ofdm(dev, 0x21, 0x27);mdelay(1); - - write_phy_ofdm(dev, 0x22, 0x16);mdelay(1); - -// if(priv->card_type != USB) - //write_phy_ofdm(dev, 0x23, 0x43); //FIXME maybe not needed // <> - - write_phy_ofdm(dev, 0x24, 0x46); mdelay(1); - write_phy_ofdm(dev, 0x25, 0x20); mdelay(1); - write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); -#if 0 - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_ofdm(dev, 0x27, 0x08); /* Ver B. might work also fo ver C&D ?*/ - else -#endif - write_phy_ofdm(dev, 0x27, 0x88); mdelay(1); -/* Ver C & D & 8187*/ - - // <> Set init. gain to m74dBm. - write_phy_ofdm(dev, 0x0d, 0x43); mdelay(1); - write_phy_ofdm(dev, 0x1b, 0x76); mdelay(1); - write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1); - write_phy_ofdm(dev, 0x23, 0x78); mdelay(1); - - //if(priv->card_type == USB); - // rtl8225_set_gain_usb(dev, 1); /* FIXME this '2' is random */ - - write_phy_cck(dev, 0x0, 0x98); mdelay(1); - write_phy_cck(dev, 0x3, 0x20); mdelay(1); - write_phy_cck(dev, 0x4, 0x7e); mdelay(1); - write_phy_cck(dev, 0x5, 0x12); mdelay(1); - write_phy_cck(dev, 0x6, 0xfc); mdelay(1); -#if 0 - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_cck(dev, 0x7, 0xd8); /* Ver B */ - else -#endif - write_phy_cck(dev, 0x7, 0x78);mdelay(1); - /* Ver C & D & 8187*/ - - write_phy_cck(dev, 0x8, 0x2e);mdelay(1); - - write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1); - write_phy_cck(dev, 0x11, 0x88); mdelay(1); - write_phy_cck(dev, 0x12, 0x47); mdelay(1); -#if 0 - if(priv->card_8185 == 1 && priv->card_8185_Bversion) - write_phy_cck(dev, 0x13, 0x98); /* Ver B */ - else -#endif - write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/ - - write_phy_cck(dev, 0x19, 0x0); - write_phy_cck(dev, 0x1a, 0xa0); - write_phy_cck(dev, 0x1b, 0x8); - write_phy_cck(dev, 0x40, 0x86); /* CCK Carrier Sense Threshold */ - - write_phy_cck(dev, 0x41, 0x8d);mdelay(1); - - - write_phy_cck(dev, 0x42, 0x15); mdelay(1); - write_phy_cck(dev, 0x43, 0x18); mdelay(1); - write_phy_cck(dev, 0x44, 0x1f); mdelay(1); - write_phy_cck(dev, 0x45, 0x1e); mdelay(1); - write_phy_cck(dev, 0x46, 0x1a); mdelay(1); - write_phy_cck(dev, 0x47, 0x15); mdelay(1); - write_phy_cck(dev, 0x48, 0x10); mdelay(1); - write_phy_cck(dev, 0x49, 0xa); mdelay(1); - write_phy_cck(dev, 0x4a, 0x5); mdelay(1); - write_phy_cck(dev, 0x4b, 0x2); mdelay(1); - write_phy_cck(dev, 0x4c, 0x5);mdelay(1); - - - write_nic_byte(dev, 0x5b, 0x0d); mdelay(1); - - - -// <> -// // TESTR 0xb 8187 -// write_phy_cck(dev, 0x10, 0x93);// & 0xfb); -// -// //if(priv->card_type != USB){ -// write_phy_ofdm(dev, 0x2, 0x62); -// write_phy_ofdm(dev, 0x6, 0x0); -// write_phy_ofdm(dev, 0x8, 0x0); -// //} - - rtl8225_SetTXPowerLevel(dev, channel); - - write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* Rx ant A, 0xdb for B */ - write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* Rx ant A, 0x10 for B */ - - rtl8185_tx_antenna(dev, 0x3); /* TX ant A, 0x0 for B */ - - /* switch to high-speed 3-wire - * last digit. 2 for both cck and ofdm - */ - if(priv->card_type == USB) - write_nic_dword(dev, 0x94, 0x3dc00002); - else{ - write_nic_dword(dev, 0x94, 0x15c00002); - rtl8185_rf_pins_enable(dev); - } - -// if(priv->card_type != USB) -// rtl8225_set_gain(dev, 4); /* FIXME this '1' is random */ // <> -// rtl8225_set_mode(dev, 1); /* FIXME start in B mode */ // <> -// -// /* make sure is waken up! */ -// write_rtl8225(dev,0x4, 0x9ff); -// rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); -// rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON); - - rtl8225_rf_set_chan(dev, priv->chan); - - write_nic_word(dev,BRSR,brsr); - -} |