diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_pci.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 79 |
1 files changed, 64 insertions, 15 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index da2b0b0a183f..28e7c7cce893 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/tty.h> +#include <linux/serial_reg.h> #include <linux/serial_core.h> #include <linux/8250_pci.h> #include <linux/bitops.h> @@ -1092,11 +1093,49 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static void kt_handle_break(struct uart_port *p) +{ + struct uart_8250_port *up = + container_of(p, struct uart_8250_port, port); + /* + * On receipt of a BI, serial device in Intel ME (Intel + * management engine) needs to have its fifos cleared for sane + * SOL (Serial Over Lan) output. + */ + serial8250_clear_and_reinit_fifos(up); +} + +static unsigned int kt_serial_in(struct uart_port *p, int offset) +{ + struct uart_8250_port *up = + container_of(p, struct uart_8250_port, port); + unsigned int val; + + /* + * When the Intel ME (management engine) gets reset its serial + * port registers could return 0 momentarily. Functions like + * serial8250_console_write, read and save the IER, perform + * some operation and then restore it. In order to avoid + * setting IER register inadvertently to 0, if the value read + * is 0, double check with ier value in uart_8250_port and use + * that instead. up->ier should be the same value as what is + * currently configured. + */ + val = inb(p->iobase + offset); + if (offset == UART_IER) { + if (val == 0) + val = up->ier; + } + return val; +} + static int kt_serial_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_port *port, int idx) { - port->flags |= UPF_IIR_ONCE; + port->flags |= UPF_BUG_THRE; + port->serial_in = kt_serial_in; + port->handle_break = kt_handle_break; return skip_tx_en_setup(priv, board, port, idx); } @@ -1118,18 +1157,6 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -static int try_enable_msi(struct pci_dev *dev) -{ - /* use msi if available, but fallback to legacy otherwise */ - pci_enable_msi(dev); - return 0; -} - -static void disable_msi(struct pci_dev *dev) -{ - pci_disable_msi(dev); -} - #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1249,9 +1276,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .init = try_enable_msi, .setup = kt_serial_setup, - .exit = disable_msi, }, /* * ITE @@ -1623,54 +1648,72 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8811, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8812, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8813, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8814, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8027, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8028, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8029, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x800C, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x800D, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, .init = pci_eg20t_init, .setup = pci_default_setup, }, @@ -2789,6 +2832,12 @@ void pciserial_suspend_ports(struct serial_private *priv) for (i = 0; i < priv->nr; i++) if (priv->line[i] >= 0) serial8250_suspend_port(priv->line[i]); + + /* + * Ensure that every init quirk is properly torn down + */ + if (priv->quirk->exit) + priv->quirk->exit(priv->dev); } EXPORT_SYMBOL_GPL(pciserial_suspend_ports); |