summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-pci.c')
-rw-r--r--drivers/usb/host/xhci-pci.c57
1 files changed, 54 insertions, 3 deletions
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 4a4cb1d91ac8..5590eac2b22d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -23,10 +23,15 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/acpi.h>
#include "xhci.h"
#include "xhci-trace.h"
+#define PORT2_SSIC_CONFIG_REG2 0x883c
+#define PROG_DONE (1 << 30)
+#define SSIC_PORT_UNUSED (1 << 31)
+
/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
@@ -176,20 +181,63 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
}
/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
* Make sure PME works on some Intel xHCI controllers by writing 1 to clear
* the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
*/
-static void xhci_pme_quirk(struct xhci_hcd *xhci)
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
u32 val;
void __iomem *reg;
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+ reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+ /* Notify SSIC that SSIC profile programming is not done */
+ val = readl(reg) & ~PROG_DONE;
+ writel(val, reg);
+
+ /* Mark SSIC port as unused(suspend) or used(resume) */
+ val = readl(reg);
+ if (suspend)
+ val |= SSIC_PORT_UNUSED;
+ else
+ val &= ~SSIC_PORT_UNUSED;
+ writel(val, reg);
+
+ /* Notify SSIC that SSIC profile programming is done */
+ val = readl(reg) | PROG_DONE;
+ writel(val, reg);
+ readl(reg);
+ }
+
reg = (void __iomem *) xhci->cap_regs + 0x80a4;
val = readl(reg);
writel(val | BIT(28), reg);
readl(reg);
}
+#ifdef CONFIG_ACPI
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
+{
+ static const u8 intel_dsm_uuid[] = {
+ 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45,
+ 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23,
+ };
+ acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL);
+}
+#else
+ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+#endif /* CONFIG_ACPI */
+
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
@@ -263,6 +311,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
+ if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+ xhci_pme_acpi_rtd3_enable(dev);
+
/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
pm_runtime_put_noidle(&dev->dev);
@@ -307,7 +358,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
pdev->no_d3cold = true;
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
- xhci_pme_quirk(xhci);
+ xhci_pme_quirk(hcd, true);
return xhci_suspend(xhci, do_wakeup);
}
@@ -340,7 +391,7 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
usb_enable_intel_xhci_ports(pdev);
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
- xhci_pme_quirk(xhci);
+ xhci_pme_quirk(hcd, false);
retval = xhci_resume(xhci, hibernated);
return retval;