diff options
Diffstat (limited to 'drivers/usb')
35 files changed, 1116 insertions, 1156 deletions
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 487ff672b104..befe0c7f63d1 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1509,7 +1509,7 @@ void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); - dev->class_dev = class_device_create(usb_device_class, + dev->class_dev = class_device_create(usb_device_class, NULL, MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev, "usbdev%d.%d", dev->bus->busnum, dev->devnum); diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 65ca131cc44c..78cb4be9529f 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -172,7 +172,9 @@ int usb_register_dev(struct usb_interface *intf, ++temp; else temp = name; - intf->class_dev = class_device_create(usb_class, MKDEV(USB_MAJOR, minor), &intf->dev, "%s", temp); + intf->class_dev = class_device_create(usb_class, NULL, + MKDEV(USB_MAJOR, minor), + &intf->dev, "%s", temp); if (IS_ERR(intf->class_dev)) { spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index ff19d64041b5..14c47a10da86 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -782,7 +782,8 @@ static int usb_register_bus(struct usb_bus *bus) return -E2BIG; } - bus->class_dev = class_device_create(usb_host_class, MKDEV(0,0), bus->controller, "usb_host%d", busnum); + bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0), + bus->controller, "usb_host%d", busnum); if (IS_ERR(bus->class_dev)) { clear_bit(busnum, busmap.busmap); up(&usb_bus_list_lock); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a12cab5314e9..c3e2024c4347 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1020,9 +1020,15 @@ void usb_set_device_state(struct usb_device *udev, spin_lock_irqsave(&device_state_lock, flags); if (udev->state == USB_STATE_NOTATTACHED) ; /* do nothing */ - else if (new_state != USB_STATE_NOTATTACHED) + else if (new_state != USB_STATE_NOTATTACHED) { udev->state = new_state; - else + if (new_state == USB_STATE_CONFIGURED) + device_init_wakeup(&udev->dev, + (udev->actconfig->desc.bmAttributes + & USB_CONFIG_ATT_WAKEUP)); + else if (new_state != USB_STATE_SUSPENDED) + device_init_wakeup(&udev->dev, 0); + } else recursively_mark_NOTATTACHED(udev); spin_unlock_irqrestore(&device_state_lock, flags); } @@ -1546,11 +1552,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, * NOTE: OTG devices may issue remote wakeup (or SRP) even when * we don't explicitly enable it here. */ - if (udev->actconfig - // && FIXME (remote wakeup enabled on this bus) - // ... currently assuming it's always appropriate - && (udev->actconfig->desc.bmAttributes - & USB_CONFIG_ATT_WAKEUP) != 0) { + if (device_may_wakeup(&udev->dev)) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_SET_FEATURE, USB_RECIP_DEVICE, USB_DEVICE_REMOTE_WAKEUP, 0, diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 8d9d8ee89554..503201764f6b 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -935,14 +935,10 @@ static int dummy_udc_remove (struct device *dev) return 0; } -static int dummy_udc_suspend (struct device *dev, pm_message_t state, - u32 level) +static int dummy_udc_suspend (struct device *dev, pm_message_t state) { struct dummy *dum = dev_get_drvdata(dev); - if (level != SUSPEND_DISABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 1; @@ -954,13 +950,10 @@ static int dummy_udc_suspend (struct device *dev, pm_message_t state, return 0; } -static int dummy_udc_resume (struct device *dev, u32 level) +static int dummy_udc_resume (struct device *dev) { struct dummy *dum = dev_get_drvdata(dev); - if (level != RESUME_ENABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 0; @@ -1936,14 +1929,10 @@ static int dummy_hcd_remove (struct device *dev) return 0; } -static int dummy_hcd_suspend (struct device *dev, pm_message_t state, - u32 level) +static int dummy_hcd_suspend (struct device *dev, pm_message_t state) { struct usb_hcd *hcd; - if (level != SUSPEND_DISABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); hcd = dev_get_drvdata (dev); @@ -1958,13 +1947,10 @@ static int dummy_hcd_suspend (struct device *dev, pm_message_t state, return 0; } -static int dummy_hcd_resume (struct device *dev, u32 level) +static int dummy_hcd_resume (struct device *dev) { struct usb_hcd *hcd; - if (level != RESUME_ENABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); hcd = dev_get_drvdata (dev); hcd->state = HC_STATE_RUNNING; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 287c5900fb13..b7885dc0f42f 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -2909,12 +2909,10 @@ static int __exit omap_udc_remove(struct device *dev) * may involve talking to an external transceiver (e.g. isp1301). */ -static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level) +static int omap_udc_suspend(struct device *dev, pm_message_t message) { u32 devstat; - if (level != SUSPEND_POWER_DOWN) - return 0; devstat = UDC_DEVSTAT_REG; /* we're requesting 48 MHz clock if the pullup is enabled @@ -2931,11 +2929,8 @@ static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level) return 0; } -static int omap_udc_resume(struct device *dev, u32 level) +static int omap_udc_resume(struct device *dev) { - if (level != RESUME_POWER_ON) - return 0; - DBG("resume + wakeup/SRP\n"); omap_pullup(&udc->gadget, 1); diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 6e545393cfff..647028590b23 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -422,7 +422,7 @@ static inline void ep0_idle (struct pxa2xx_udc *dev) } static int -write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max) +write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max) { u8 *buf; unsigned length, count; @@ -2602,24 +2602,23 @@ static int __exit pxa2xx_udc_remove(struct device *_dev) * VBUS IRQs should probably be ignored so that the PXA device just acts * "dead" to USB hosts until system resume. */ -static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state) { struct pxa2xx_udc *udc = dev_get_drvdata(dev); - if (level == SUSPEND_POWER_DOWN) { - if (!udc->mach->udc_command) - WARN("USB host won't detect disconnect!\n"); - pullup(udc, 0); - } + if (!udc->mach->udc_command) + WARN("USB host won't detect disconnect!\n"); + pullup(udc, 0); + return 0; } -static int pxa2xx_udc_resume(struct device *dev, u32 level) +static int pxa2xx_udc_resume(struct device *dev) { struct pxa2xx_udc *udc = dev_get_drvdata(dev); - if (level == RESUME_POWER_ON) - pullup(udc, 1); + pullup(udc, 1); + return 0; } diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index a58f3e6e71f1..19a883f7d1b8 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -69,11 +69,11 @@ struct pxa2xx_ep { * UDDR = UDC Endpoint Data Register (the fifo) * DRCM = DMA Request Channel Map */ - volatile unsigned long *reg_udccs; - volatile unsigned long *reg_ubcr; - volatile unsigned long *reg_uddr; + volatile u32 *reg_udccs; + volatile u32 *reg_ubcr; + volatile u32 *reg_uddr; #ifdef USE_DMA - volatile unsigned long *reg_drcmr; + volatile u32 *reg_drcmr; #define drcmr(n) .reg_drcmr = & DRCMR ## n , #else #define drcmr(n) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 2548d94fcd72..642f35068ce2 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1774,15 +1774,12 @@ static int __init isp116x_probe(struct device *dev) /* Suspend of platform device */ -static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase) +static int isp116x_suspend(struct device *dev, pm_message_t state) { int ret = 0; struct usb_hcd *hcd = dev_get_drvdata(dev); - VDBG("%s: state %x, phase %x\n", __func__, state, phase); - - if (phase != SUSPEND_DISABLE && phase != SUSPEND_POWER_DOWN) - return 0; + VDBG("%s: state %x\n", __func__, state); ret = usb_suspend_device(hcd->self.root_hub, state); if (!ret) { @@ -1797,15 +1794,12 @@ static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase) /* Resume platform device */ -static int isp116x_resume(struct device *dev, u32 phase) +static int isp116x_resume(struct device *dev) { int ret = 0; struct usb_hcd *hcd = dev_get_drvdata(dev); - VDBG("%s: state %x, phase %x\n", __func__, dev->power.power_state, - phase); - if (phase != RESUME_POWER_ON) - return 0; + VDBG("%s: state %x\n", __func__, dev->power.power_state); ret = usb_resume_device(hcd->self.root_hub); if (!ret) { diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index d8f3ba7ad52e..a574216625a0 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -455,14 +455,11 @@ static int ohci_hcd_omap_drv_remove(struct device *dev) #ifdef CONFIG_PM -static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level) +static int ohci_omap_suspend(struct device *dev, pm_message_t message) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); int status = -EINVAL; - if (level != SUSPEND_POWER_DOWN) - return 0; - down(&ohci_to_hcd(ohci)->self.root_hub->serialize); status = ohci_hub_suspend(ohci_to_hcd(ohci)); if (status == 0) { @@ -476,14 +473,11 @@ static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level return status; } -static int ohci_omap_resume(struct device *dev, u32 level) +static int ohci_omap_resume(struct device *dev) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); int status = 0; - if (level != RESUME_POWER_ON) - return 0; - if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 2fdb262d4726..f042261ecb8e 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -309,7 +309,7 @@ static int ohci_hcd_pxa27x_drv_remove(struct device *dev) return 0; } -static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u32 level) +static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state) { // struct platform_device *pdev = to_platform_device(dev); // struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -318,7 +318,7 @@ static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u return 0; } -static int ohci_hcd_pxa27x_drv_resume(struct device *dev, u32 level) +static int ohci_hcd_pxa27x_drv_resume(struct device *dev) { // struct platform_device *pdev = to_platform_device(dev); // struct usb_hcd *hcd = dev_get_drvdata(dev); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index cad858575cea..b5e7a478bc01 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1784,15 +1784,12 @@ sl811h_probe(struct device *dev) */ static int -sl811h_suspend(struct device *dev, pm_message_t state, u32 phase) +sl811h_suspend(struct device *dev, pm_message_t state) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); int retval = 0; - if (phase != SUSPEND_POWER_DOWN) - return retval; - if (state.event == PM_EVENT_FREEZE) retval = sl811h_hub_suspend(hcd); else if (state.event == PM_EVENT_SUSPEND) @@ -1803,14 +1800,11 @@ sl811h_suspend(struct device *dev, pm_message_t state, u32 phase) } static int -sl811h_resume(struct device *dev, u32 phase) +sl811h_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); - if (phase != RESUME_POWER_ON) - return 0; - /* with no "check to see if VBUS is still powered" board hook, * let's assume it'd only be powered to enable remote wakeup. */ diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c index 74f8760d7c07..a32558b4048e 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/usb/input/acecad.c @@ -53,7 +53,7 @@ struct usb_acecad { char name[128]; char phys[64]; struct usb_device *usbdev; - struct input_dev dev; + struct input_dev *input; struct urb *irq; signed char *data; @@ -64,7 +64,7 @@ static void usb_acecad_irq(struct urb *urb, struct pt_regs *regs) { struct usb_acecad *acecad = urb->context; unsigned char *data = acecad->data; - struct input_dev *dev = &acecad->dev; + struct input_dev *dev = acecad->input; int prox, status; switch (urb->status) { @@ -135,8 +135,8 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ struct usb_host_interface *interface = intf->cur_altsetting; struct usb_endpoint_descriptor *endpoint; struct usb_acecad *acecad; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; if (interface->desc.bNumEndpoints != 1) return -ENODEV; @@ -153,8 +153,9 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL); - if (!acecad) - return -ENOMEM; + input_dev = input_allocate_device(); + if (!acecad || !input_dev) + goto fail1; acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma); if (!acecad->data) @@ -164,6 +165,9 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ if (!acecad->irq) goto fail2; + acecad->usbdev = dev; + acecad->input = input_dev; + if (dev->manufacturer) strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name)); @@ -173,48 +177,48 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ strlcat(acecad->name, dev->product, sizeof(acecad->name)); } - usb_make_path(dev, path, sizeof(path)); - snprintf(acecad->phys, sizeof(acecad->phys), "%s/input0", path); + usb_make_path(dev, acecad->phys, sizeof(acecad->phys)); + strlcat(acecad->phys, "/input0", sizeof(acecad->phys)); - acecad->usbdev = dev; + input_dev->name = acecad->name; + input_dev->phys = acecad->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = acecad; - acecad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - acecad->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - acecad->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - acecad->dev.keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2); + input_dev->open = usb_acecad_open; + input_dev->close = usb_acecad_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2); switch (id->driver_info) { case 0: - acecad->dev.absmax[ABS_X] = 5000; - acecad->dev.absmax[ABS_Y] = 3750; - acecad->dev.absmax[ABS_PRESSURE] = 512; + input_dev->absmax[ABS_X] = 5000; + input_dev->absmax[ABS_Y] = 3750; + input_dev->absmax[ABS_PRESSURE] = 512; if (!strlen(acecad->name)) snprintf(acecad->name, sizeof(acecad->name), "USB Acecad Flair Tablet %04x:%04x", - dev->descriptor.idVendor, dev->descriptor.idProduct); + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); break; case 1: - acecad->dev.absmax[ABS_X] = 3000; - acecad->dev.absmax[ABS_Y] = 2250; - acecad->dev.absmax[ABS_PRESSURE] = 1024; + input_dev->absmax[ABS_X] = 3000; + input_dev->absmax[ABS_Y] = 2250; + input_dev->absmax[ABS_PRESSURE] = 1024; if (!strlen(acecad->name)) snprintf(acecad->name, sizeof(acecad->name), "USB Acecad 302 Tablet %04x:%04x", - dev->descriptor.idVendor, dev->descriptor.idProduct); + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); break; } - acecad->dev.absfuzz[ABS_X] = 4; - acecad->dev.absfuzz[ABS_Y] = 4; - - acecad->dev.private = acecad; - acecad->dev.open = usb_acecad_open; - acecad->dev.close = usb_acecad_close; - - acecad->dev.name = acecad->name; - acecad->dev.phys = acecad->phys; - usb_to_input_id(dev, &acecad->dev.id); - acecad->dev.dev = &intf->dev; + input_dev->absfuzz[ABS_X] = 4; + input_dev->absfuzz[ABS_Y] = 4; usb_fill_int_urb(acecad->irq, dev, pipe, acecad->data, maxp > 8 ? 8 : maxp, @@ -222,17 +226,15 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ acecad->irq->transfer_dma = acecad->data_dma; acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&acecad->dev); - - printk(KERN_INFO "input: %s with packet size %d on %s\n", - acecad->name, maxp, path); + input_register_device(acecad->input); usb_set_intfdata(intf, acecad); return 0; fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma); - fail1: kfree(acecad); + fail1: input_free_device(input_dev); + kfree(acecad); return -ENOMEM; } @@ -243,7 +245,7 @@ static void usb_acecad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (acecad) { usb_kill_urb(acecad->irq); - input_unregister_device(&acecad->dev); + input_unregister_device(acecad->input); usb_free_urb(acecad->irq); usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma); kfree(acecad); diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index cd0cbfe20723..1c5205321d83 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -317,7 +317,7 @@ struct aiptek_settings { }; struct aiptek { - struct input_dev inputdev; /* input device struct */ + struct input_dev *inputdev; /* input device struct */ struct usb_device *usbdev; /* usb device struct */ struct urb *urb; /* urb for incoming reports */ dma_addr_t data_dma; /* our dma stuffage */ @@ -402,7 +402,7 @@ static void aiptek_irq(struct urb *urb, struct pt_regs *regs) { struct aiptek *aiptek = urb->context; unsigned char *data = aiptek->data; - struct input_dev *inputdev = &aiptek->inputdev; + struct input_dev *inputdev = aiptek->inputdev; int jitterable = 0; int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck; @@ -955,20 +955,20 @@ static int aiptek_program_tablet(struct aiptek *aiptek) /* Query getXextension */ if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0) return ret; - aiptek->inputdev.absmin[ABS_X] = 0; - aiptek->inputdev.absmax[ABS_X] = ret - 1; + aiptek->inputdev->absmin[ABS_X] = 0; + aiptek->inputdev->absmax[ABS_X] = ret - 1; /* Query getYextension */ if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0) return ret; - aiptek->inputdev.absmin[ABS_Y] = 0; - aiptek->inputdev.absmax[ABS_Y] = ret - 1; + aiptek->inputdev->absmin[ABS_Y] = 0; + aiptek->inputdev->absmax[ABS_Y] = ret - 1; /* Query getPressureLevels */ if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0) return ret; - aiptek->inputdev.absmin[ABS_PRESSURE] = 0; - aiptek->inputdev.absmax[ABS_PRESSURE] = ret - 1; + aiptek->inputdev->absmin[ABS_PRESSURE] = 0; + aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1; /* Depending on whether we are in absolute or relative mode, we will * do a switchToTablet(absolute) or switchToMouse(relative) command. @@ -1025,8 +1025,8 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr return 0; return snprintf(buf, PAGE_SIZE, "%dx%d\n", - aiptek->inputdev.absmax[ABS_X] + 1, - aiptek->inputdev.absmax[ABS_Y] + 1); + aiptek->inputdev->absmax[ABS_X] + 1, + aiptek->inputdev->absmax[ABS_Y] + 1); } /* These structs define the sysfs files, param #1 is the name of the @@ -1048,7 +1048,7 @@ static ssize_t show_tabletProductId(struct device *dev, struct device_attribute return 0; return snprintf(buf, PAGE_SIZE, "0x%04x\n", - aiptek->inputdev.id.product); + aiptek->inputdev->id.product); } static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL); @@ -1063,7 +1063,7 @@ static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute * if (aiptek == NULL) return 0; - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev.id.vendor); + return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor); } static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL); @@ -1977,7 +1977,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) struct input_dev *inputdev; struct input_handle *inputhandle; struct list_head *node, *next; - char path[64 + 1]; int i; int speeds[] = { 0, AIPTEK_PROGRAMMABLE_DELAY_50, @@ -1996,24 +1995,26 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) */ speeds[0] = programmableDelay; - if ((aiptek = kmalloc(sizeof(struct aiptek), GFP_KERNEL)) == NULL) - return -ENOMEM; - memset(aiptek, 0, sizeof(struct aiptek)); + aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL); + inputdev = input_allocate_device(); + if (!aiptek || !inputdev) + goto fail1; aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH, SLAB_ATOMIC, &aiptek->data_dma); - if (aiptek->data == NULL) { - kfree(aiptek); - return -ENOMEM; - } + if (!aiptek->data) + goto fail1; aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); - if (aiptek->urb == NULL) { - usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, - aiptek->data_dma); - kfree(aiptek); - return -ENOMEM; - } + if (!aiptek->urb) + goto fail2; + + aiptek->inputdev = inputdev; + aiptek->usbdev = usbdev; + aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; + aiptek->inDelay = 0; + aiptek->endDelay = 0; + aiptek->previousJitterable = 0; /* Set up the curSettings struct. Said struct contains the current * programmable parameters. The newSetting struct contains changes @@ -2036,31 +2037,48 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Both structs should have equivalent settings */ - memcpy(&aiptek->newSetting, &aiptek->curSetting, - sizeof(struct aiptek_settings)); + aiptek->newSetting = aiptek->curSetting; + + /* Determine the usb devices' physical path. + * Asketh not why we always pretend we're using "../input0", + * but I suspect this will have to be refactored one + * day if a single USB device can be a keyboard & a mouse + * & a tablet, and the inputX number actually will tell + * us something... + */ + usb_make_path(usbdev, aiptek->features.usbPath, + sizeof(aiptek->features.usbPath)); + strlcat(aiptek->features.usbPath, "/input0", + sizeof(aiptek->features.usbPath)); + + /* Set up client data, pointers to open and close routines + * for the input device. + */ + inputdev->name = "Aiptek"; + inputdev->phys = aiptek->features.usbPath; + usb_to_input_id(usbdev, &inputdev->id); + inputdev->cdev.dev = &intf->dev; + inputdev->private = aiptek; + inputdev->open = aiptek_open; + inputdev->close = aiptek_close; /* Now program the capacities of the tablet, in terms of being * an input device. */ - aiptek->inputdev.evbit[0] |= BIT(EV_KEY) + inputdev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL) | BIT(EV_MSC); - aiptek->inputdev.absbit[0] |= - (BIT(ABS_X) | - BIT(ABS_Y) | - BIT(ABS_PRESSURE) | - BIT(ABS_TILT_X) | - BIT(ABS_TILT_Y) | BIT(ABS_WHEEL) | BIT(ABS_MISC)); + inputdev->absbit[0] |= BIT(ABS_MISC); - aiptek->inputdev.relbit[0] |= + inputdev->relbit[0] |= (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC)); - aiptek->inputdev.keybit[LONG(BTN_LEFT)] |= + inputdev->keybit[LONG(BTN_LEFT)] |= (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE)); - aiptek->inputdev.keybit[LONG(BTN_DIGI)] |= + inputdev->keybit[LONG(BTN_DIGI)] |= (BIT(BTN_TOOL_PEN) | BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_PENCIL) | @@ -2070,70 +2088,26 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) BIT(BTN_TOOL_LENS) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2)); - aiptek->inputdev.mscbit[0] = BIT(MSC_SERIAL); + inputdev->mscbit[0] = BIT(MSC_SERIAL); /* Programming the tablet macro keys needs to be done with a for loop * as the keycodes are discontiguous. */ for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i) - set_bit(macroKeyEvents[i], aiptek->inputdev.keybit); - - /* Set up client data, pointers to open and close routines - * for the input device. - */ - aiptek->inputdev.private = aiptek; - aiptek->inputdev.open = aiptek_open; - aiptek->inputdev.close = aiptek_close; - - /* Determine the usb devices' physical path. - * Asketh not why we always pretend we're using "../input0", - * but I suspect this will have to be refactored one - * day if a single USB device can be a keyboard & a mouse - * & a tablet, and the inputX number actually will tell - * us something... - */ - if (usb_make_path(usbdev, path, 64) > 0) - sprintf(aiptek->features.usbPath, "%s/input0", path); + set_bit(macroKeyEvents[i], inputdev->keybit); - /* Program the input device coordinate capacities. We do not yet + /* + * Program the input device coordinate capacities. We do not yet * know what maximum X, Y, and Z values are, so we're putting fake * values in. Later, we'll ask the tablet to put in the correct * values. */ - aiptek->inputdev.absmin[ABS_X] = 0; - aiptek->inputdev.absmax[ABS_X] = 2999; - aiptek->inputdev.absmin[ABS_Y] = 0; - aiptek->inputdev.absmax[ABS_Y] = 2249; - aiptek->inputdev.absmin[ABS_PRESSURE] = 0; - aiptek->inputdev.absmax[ABS_PRESSURE] = 511; - aiptek->inputdev.absmin[ABS_TILT_X] = AIPTEK_TILT_MIN; - aiptek->inputdev.absmax[ABS_TILT_X] = AIPTEK_TILT_MAX; - aiptek->inputdev.absmin[ABS_TILT_Y] = AIPTEK_TILT_MIN; - aiptek->inputdev.absmax[ABS_TILT_Y] = AIPTEK_TILT_MAX; - aiptek->inputdev.absmin[ABS_WHEEL] = AIPTEK_WHEEL_MIN; - aiptek->inputdev.absmax[ABS_WHEEL] = AIPTEK_WHEEL_MAX - 1; - aiptek->inputdev.absfuzz[ABS_X] = 0; - aiptek->inputdev.absfuzz[ABS_Y] = 0; - aiptek->inputdev.absfuzz[ABS_PRESSURE] = 0; - aiptek->inputdev.absfuzz[ABS_TILT_X] = 0; - aiptek->inputdev.absfuzz[ABS_TILT_Y] = 0; - aiptek->inputdev.absfuzz[ABS_WHEEL] = 0; - aiptek->inputdev.absflat[ABS_X] = 0; - aiptek->inputdev.absflat[ABS_Y] = 0; - aiptek->inputdev.absflat[ABS_PRESSURE] = 0; - aiptek->inputdev.absflat[ABS_TILT_X] = 0; - aiptek->inputdev.absflat[ABS_TILT_Y] = 0; - aiptek->inputdev.absflat[ABS_WHEEL] = 0; - aiptek->inputdev.name = "Aiptek"; - aiptek->inputdev.phys = aiptek->features.usbPath; - usb_to_input_id(usbdev, &aiptek->inputdev.id); - aiptek->inputdev.dev = &intf->dev; - - aiptek->usbdev = usbdev; - aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; - aiptek->inDelay = 0; - aiptek->endDelay = 0; - aiptek->previousJitterable = 0; + input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0); + input_set_abs_params(inputdev, ABS_X, 0, 2249, 0, 0); + input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); + input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0); endpoint = &intf->altsetting[0].endpoint[0].desc; @@ -2150,28 +2124,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) aiptek->urb->transfer_dma = aiptek->data_dma; aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* Register the tablet as an Input Device - */ - input_register_device(&aiptek->inputdev); - - /* We now will look for the evdev device which is mapped to - * the tablet. The partial name is kept in the link list of - * input_handles associated with this input device. - * What identifies an evdev input_handler is that it begins - * with 'event', continues with a digit, and that in turn - * is mapped to /{devfs}/input/eventN. - */ - inputdev = &aiptek->inputdev; - list_for_each_safe(node, next, &inputdev->h_list) { - inputhandle = to_handle(node); - if (strncmp(inputhandle->name, "event", 5) == 0) { - strcpy(aiptek->features.inputPath, inputhandle->name); - break; - } - } - - info("input: Aiptek on %s (%s)\n", path, aiptek->features.inputPath); - /* Program the tablet. This sets the tablet up in the mode * specified in newSetting, and also queries the tablet's * physical capacities. @@ -2186,13 +2138,32 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) { aiptek->curSetting.programmableDelay = speeds[i]; (void)aiptek_program_tablet(aiptek); - if (aiptek->inputdev.absmax[ABS_X] > 0) { + if (aiptek->inputdev->absmax[ABS_X] > 0) { info("input: Aiptek using %d ms programming speed\n", aiptek->curSetting.programmableDelay); break; } } + /* Register the tablet as an Input Device + */ + input_register_device(aiptek->inputdev); + + /* We now will look for the evdev device which is mapped to + * the tablet. The partial name is kept in the link list of + * input_handles associated with this input device. + * What identifies an evdev input_handler is that it begins + * with 'event', continues with a digit, and that in turn + * is mapped to /{devfs}/input/eventN. + */ + list_for_each_safe(node, next, &inputdev->h_list) { + inputhandle = to_handle(node); + if (strncmp(inputhandle->name, "event", 5) == 0) { + strcpy(aiptek->features.inputPath, inputhandle->name); + break; + } + } + /* Associate this driver's struct with the usb interface. */ usb_set_intfdata(intf, aiptek); @@ -2207,6 +2178,12 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) info("aiptek: error loading 'evdev' module"); return 0; + +fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, + aiptek->data_dma); +fail1: input_free_device(inputdev); + kfree(aiptek); + return -ENOMEM; } /* Forward declaration */ @@ -2234,7 +2211,7 @@ static void aiptek_disconnect(struct usb_interface *intf) /* Free & unhook everything from the system. */ usb_kill_urb(aiptek->urb); - input_unregister_device(&aiptek->inputdev); + input_unregister_device(aiptek->inputdev); aiptek_delete_files(&intf->dev); usb_free_urb(aiptek->urb); usb_buffer_free(interface_to_usbdev(intf), diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index e03c1c567a14..15840db092a5 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -39,7 +39,7 @@ #define APPLE_VENDOR_ID 0x05AC #define ATP_DEVICE(prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ USB_DEVICE_ID_MATCH_INT_CLASS | \ USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ .idVendor = APPLE_VENDOR_ID, \ @@ -78,9 +78,9 @@ MODULE_DEVICE_TABLE (usb, atp_table); * We try to keep the touchpad aspect ratio while still doing only simple * arithmetics. * The factors below give coordinates like: - * 0 <= x < 960 on 12" and 15" Powerbooks - * 0 <= x < 1600 on 17" Powerbooks - * 0 <= y < 646 + * 0 <= x < 960 on 12" and 15" Powerbooks + * 0 <= x < 1600 on 17" Powerbooks + * 0 <= y < 646 */ #define ATP_XFACT 64 #define ATP_YFACT 43 @@ -93,11 +93,12 @@ MODULE_DEVICE_TABLE (usb, atp_table); /* Structure to hold all of our device specific stuff */ struct atp { + char phys[64]; struct usb_device * udev; /* usb device */ struct urb * urb; /* usb request block */ signed char * data; /* transferred data */ int open; /* non-zero if opened */ - struct input_dev input; /* input dev */ + struct input_dev *input; /* input dev */ int valid; /* are the sensors valid ? */ int x_old; /* last reported x/y, */ int y_old; /* used for smoothing */ @@ -114,11 +115,11 @@ struct atp { int i; \ printk("appletouch: %s %lld", msg, (long long)jiffies); \ for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \ - printk(" %02x", tab[i]); \ - printk("\n"); \ + printk(" %02x", tab[i]); \ + printk("\n"); \ } -#define dprintk(format, a...) \ +#define dprintk(format, a...) \ do { \ if (debug) printk(format, ##a); \ } while (0) @@ -219,8 +220,8 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) for (i = 16; i < ATP_XSENSORS; i++) if (dev->xy_cur[i]) { printk("appletouch: 17\" model detected.\n"); - input_set_abs_params(&dev->input, ABS_X, 0, - (ATP_XSENSORS - 1) * + input_set_abs_params(dev->input, ABS_X, 0, + (ATP_XSENSORS - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); break; @@ -260,12 +261,12 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) "Xz: %3d Yz: %3d\n", x, y, x_z, y_z); - input_report_key(&dev->input, BTN_TOUCH, 1); - input_report_abs(&dev->input, ABS_X, x); - input_report_abs(&dev->input, ABS_Y, y); - input_report_abs(&dev->input, ABS_PRESSURE, + input_report_key(dev->input, BTN_TOUCH, 1); + input_report_abs(dev->input, ABS_X, x); + input_report_abs(dev->input, ABS_Y, y); + input_report_abs(dev->input, ABS_PRESSURE, min(ATP_PRESSURE, x_z + y_z)); - atp_report_fingers(&dev->input, max(x_f, y_f)); + atp_report_fingers(dev->input, max(x_f, y_f)); } dev->x_old = x; dev->y_old = y; @@ -273,17 +274,17 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) else if (!x && !y) { dev->x_old = dev->y_old = -1; - input_report_key(&dev->input, BTN_TOUCH, 0); - input_report_abs(&dev->input, ABS_PRESSURE, 0); - atp_report_fingers(&dev->input, 0); + input_report_key(dev->input, BTN_TOUCH, 0); + input_report_abs(dev->input, ABS_PRESSURE, 0); + atp_report_fingers(dev->input, 0); /* reset the accumulator on release */ memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); } - input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]); + input_report_key(dev->input, BTN_LEFT, !!dev->data[80]); - input_sync(&dev->input); + input_sync(dev->input); exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); @@ -314,21 +315,14 @@ static void atp_close(struct input_dev *input) static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) { - struct atp *dev = NULL; + struct atp *dev; + struct input_dev *input_dev; + struct usb_device *udev = interface_to_usbdev(iface); struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int int_in_endpointAddr = 0; int i, retval = -ENOMEM; - /* allocate memory for our device state and initialize it */ - dev = kmalloc(sizeof(struct atp), GFP_KERNEL); - if (dev == NULL) { - err("Out of memory"); - goto err_kmalloc; - } - memset(dev, 0, sizeof(struct atp)); - - dev->udev = interface_to_usbdev(iface); /* set up the endpoint information */ /* use only the first interrupt-in endpoint */ @@ -345,70 +339,82 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id } } if (!int_in_endpointAddr) { - retval = -EIO; err("Could not find int-in endpoint"); - goto err_endpoint; + return -EIO; } - /* save our data pointer in this interface device */ - usb_set_intfdata(iface, dev); + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(struct atp), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!dev || !input_dev) { + err("Out of memory"); + goto err_free_devs; + } + + dev->udev = udev; + dev->input = input_dev; dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) { retval = -ENOMEM; - goto err_usballoc; + goto err_free_devs; } + dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL, &dev->urb->transfer_dma); if (!dev->data) { retval = -ENOMEM; - goto err_usbbufalloc; + goto err_free_urb; } - usb_fill_int_urb(dev->urb, dev->udev, - usb_rcvintpipe(dev->udev, int_in_endpointAddr), + + usb_fill_int_urb(dev->urb, udev, + usb_rcvintpipe(udev, int_in_endpointAddr), dev->data, ATP_DATASIZE, atp_complete, dev, 1); - init_input_dev(&dev->input); - dev->input.name = "appletouch"; - dev->input.dev = &iface->dev; - dev->input.private = dev; - dev->input.open = atp_open; - dev->input.close = atp_close; + usb_make_path(udev, dev->phys, sizeof(dev->phys)); + strlcat(dev->phys, "/input0", sizeof(dev->phys)); + + input_dev->name = "appletouch"; + input_dev->phys = dev->phys; + usb_to_input_id(dev->udev, &input_dev->id); + input_dev->cdev.dev = &iface->dev; - usb_to_input_id(dev->udev, &dev->input.id); + input_dev->private = dev; + input_dev->open = atp_open; + input_dev->close = atp_close; - set_bit(EV_ABS, dev->input.evbit); + set_bit(EV_ABS, input_dev->evbit); /* * 12" and 15" Powerbooks only have 16 x sensors, * 17" models are detected later. */ - input_set_abs_params(&dev->input, ABS_X, 0, + input_set_abs_params(input_dev, ABS_X, 0, (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); - input_set_abs_params(&dev->input, ABS_Y, 0, + input_set_abs_params(input_dev, ABS_Y, 0, (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); - input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); - set_bit(EV_KEY, dev->input.evbit); - set_bit(BTN_TOUCH, dev->input.keybit); - set_bit(BTN_TOOL_FINGER, dev->input.keybit); - set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit); - set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit); - set_bit(BTN_LEFT, dev->input.keybit); + set_bit(EV_KEY, input_dev->evbit); + set_bit(BTN_TOUCH, input_dev->keybit); + set_bit(BTN_TOOL_FINGER, input_dev->keybit); + set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + set_bit(BTN_LEFT, input_dev->keybit); - input_register_device(&dev->input); + input_register_device(dev->input); - printk(KERN_INFO "input: appletouch connected\n"); + /* save our data pointer in this interface device */ + usb_set_intfdata(iface, dev); return 0; -err_usbbufalloc: + err_free_urb: usb_free_urb(dev->urb); -err_usballoc: + err_free_devs: usb_set_intfdata(iface, NULL); -err_endpoint: kfree(dev); -err_kmalloc: + input_free_device(input_dev); return retval; } @@ -419,7 +425,7 @@ static void atp_disconnect(struct usb_interface *iface) usb_set_intfdata(iface, NULL); if (dev) { usb_kill_urb(dev->urb); - input_unregister_device(&dev->input); + input_unregister_device(dev->input); usb_free_urb(dev->urb); usb_buffer_free(dev->udev, ATP_DATASIZE, dev->data, dev->urb->transfer_dma); diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index fd99681ee483..9a2a47db9494 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -112,7 +112,6 @@ #define NAME_BUFSIZE 80 /* size of product name, path buffers */ #define DATA_BUFSIZE 63 /* size of URB data buffers */ -#define ATI_INPUTNUM 1 /* Which input device to register as */ static unsigned long channel_mask; module_param(channel_mask, ulong, 0444); @@ -162,7 +161,7 @@ static char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; static DECLARE_MUTEX(disconnect_sem); struct ati_remote { - struct input_dev idev; + struct input_dev *idev; struct usb_device *udev; struct usb_interface *interface; @@ -198,15 +197,13 @@ struct ati_remote { #define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ /* Translation table from hardware messages to input events. */ -static struct -{ +static struct { short kind; unsigned char data1, data2; int type; unsigned int code; int value; -} ati_remote_tbl[] = -{ +} ati_remote_tbl[] = { /* Directional control pad axes */ {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ @@ -286,7 +283,6 @@ static struct /* Local function prototypes */ static void ati_remote_dump (unsigned char *data, unsigned int actual_length); -static void ati_remote_delete (struct ati_remote *dev); static int ati_remote_open (struct input_dev *inputdev); static void ati_remote_close (struct input_dev *inputdev); static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data); @@ -428,7 +424,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) { struct ati_remote *ati_remote = urb->context; unsigned char *data= ati_remote->inbuf; - struct input_dev *dev = &ati_remote->idev; + struct input_dev *dev = ati_remote->idev; int index, acc; int remote_num; @@ -587,38 +583,55 @@ static void ati_remote_irq_in(struct urb *urb, struct pt_regs *regs) } /* - * ati_remote_delete + * ati_remote_alloc_buffers */ -static void ati_remote_delete(struct ati_remote *ati_remote) +static int ati_remote_alloc_buffers(struct usb_device *udev, + struct ati_remote *ati_remote) { - if (ati_remote->irq_urb) - usb_kill_urb(ati_remote->irq_urb); + ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, + &ati_remote->inbuf_dma); + if (!ati_remote->inbuf) + return -1; - if (ati_remote->out_urb) - usb_kill_urb(ati_remote->out_urb); + ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, + &ati_remote->outbuf_dma); + if (!ati_remote->outbuf) + return -1; - input_unregister_device(&ati_remote->idev); + ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->irq_urb) + return -1; - if (ati_remote->inbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->inbuf, ati_remote->inbuf_dma); + ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->out_urb) + return -1; - if (ati_remote->outbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->outbuf, ati_remote->outbuf_dma); + return 0; +} +/* + * ati_remote_free_buffers + */ +static void ati_remote_free_buffers(struct ati_remote *ati_remote) +{ if (ati_remote->irq_urb) usb_free_urb(ati_remote->irq_urb); if (ati_remote->out_urb) usb_free_urb(ati_remote->out_urb); - kfree(ati_remote); + if (ati_remote->inbuf) + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->inbuf_dma); + + if (ati_remote->outbuf) + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->outbuf_dma); } static void ati_remote_input_init(struct ati_remote *ati_remote) { - struct input_dev *idev = &(ati_remote->idev); + struct input_dev *idev = ati_remote->idev; int i; idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); @@ -637,7 +650,7 @@ static void ati_remote_input_init(struct ati_remote *ati_remote) idev->phys = ati_remote->phys; usb_to_input_id(ati_remote->udev, &idev->id); - idev->dev = &ati_remote->udev->dev; + idev->cdev.dev = &ati_remote->udev->dev; } static int ati_remote_initialize(struct ati_remote *ati_remote) @@ -674,7 +687,7 @@ static int ati_remote_initialize(struct ati_remote *ati_remote) (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { dev_err(&ati_remote->interface->dev, "Initializing ati_remote hardware failed.\n"); - return 1; + return -EIO; } return 0; @@ -686,95 +699,83 @@ static int ati_remote_initialize(struct ati_remote *ati_remote) static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); - struct ati_remote *ati_remote = NULL; - struct usb_host_interface *iface_host; - int retval = -ENOMEM; - char path[64]; - - /* Allocate and clear an ati_remote struct */ - if (!(ati_remote = kmalloc(sizeof (struct ati_remote), GFP_KERNEL))) - return -ENOMEM; - memset(ati_remote, 0x00, sizeof (struct ati_remote)); + struct usb_host_interface *iface_host = interface->cur_altsetting; + struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; + struct ati_remote *ati_remote; + struct input_dev *input_dev; + int err = -ENOMEM; - iface_host = interface->cur_altsetting; if (iface_host->desc.bNumEndpoints != 2) { err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - ati_remote->endpoint_in = &(iface_host->endpoint[0].desc); - ati_remote->endpoint_out = &(iface_host->endpoint[1].desc); - ati_remote->udev = udev; - ati_remote->interface = interface; + endpoint_in = &iface_host->endpoint[0].desc; + endpoint_out = &iface_host->endpoint[1].desc; - if (!(ati_remote->endpoint_in->bEndpointAddress & 0x80)) { + if (!(endpoint_in->bEndpointAddress & USB_DIR_IN)) { err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - if ((ati_remote->endpoint_in->bmAttributes & 3) != 3) { + if ((endpoint_in->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) { err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - if (le16_to_cpu(ati_remote->endpoint_in->wMaxPacketSize) == 0) { + if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { err("%s: endpoint_in message size==0? \n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - /* Allocate URB buffers, URBs */ - ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, - &ati_remote->inbuf_dma); - if (!ati_remote->inbuf) - goto error; + ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ati_remote || !input_dev) + goto fail1; - ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, - &ati_remote->outbuf_dma); - if (!ati_remote->outbuf) - goto error; + /* Allocate URB buffers, URBs */ + if (ati_remote_alloc_buffers(udev, ati_remote)) + goto fail2; - ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->irq_urb) - goto error; + ati_remote->endpoint_in = endpoint_in; + ati_remote->endpoint_out = endpoint_out; + ati_remote->udev = udev; + ati_remote->idev = input_dev; + ati_remote->interface = interface; - ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->out_urb) - goto error; + usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys)); + strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); - usb_make_path(udev, path, NAME_BUFSIZE); - sprintf(ati_remote->phys, "%s/input%d", path, ATI_INPUTNUM); if (udev->manufacturer) - strcat(ati_remote->name, udev->manufacturer); + strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name)); if (udev->product) - sprintf(ati_remote->name, "%s %s", ati_remote->name, udev->product); + snprintf(ati_remote->name, sizeof(ati_remote->name), + "%s %s", ati_remote->name, udev->product); if (!strlen(ati_remote->name)) - sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)", + snprintf(ati_remote->name, sizeof(ati_remote->name), + DRIVER_DESC "(%04x,%04x)", le16_to_cpu(ati_remote->udev->descriptor.idVendor), le16_to_cpu(ati_remote->udev->descriptor.idProduct)); + ati_remote_input_init(ati_remote); + /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ - retval = ati_remote_initialize(ati_remote); - if (retval) - goto error; + err = ati_remote_initialize(ati_remote); + if (err) + goto fail3; /* Set up and register input device */ - ati_remote_input_init(ati_remote); - input_register_device(&ati_remote->idev); - - dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n", - ati_remote->name, path); + input_register_device(ati_remote->idev); usb_set_intfdata(interface, ati_remote); + return 0; -error: - if (retval) - ati_remote_delete(ati_remote); - - return retval; +fail3: usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); +fail2: ati_remote_free_buffers(ati_remote); +fail1: input_free_device(input_dev); + kfree(ati_remote); + return err; } /* @@ -791,7 +792,11 @@ static void ati_remote_disconnect(struct usb_interface *interface) return; } - ati_remote_delete(ati_remote); + usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); + input_unregister_device(ati_remote->idev); + ati_remote_free_buffers(ati_remote); + kfree(ati_remote); } /* diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 41f92b924761..411a0645a7a3 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1619,8 +1619,8 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) struct hid_descriptor *hdesc; struct hid_device *hid; unsigned quirks = 0, rsize = 0; - char *buf, *rdesc; - int n, insize = 0; + char *rdesc; + int n, len, insize = 0; for (n = 0; hid_blacklist[n].idVendor; n++) if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) && @@ -1630,10 +1630,11 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) if (quirks & HID_QUIRK_IGNORE) return NULL; - if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && ((!interface->desc.bNumEndpoints) || - usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { - dbg("class descriptor not present\n"); - return NULL; + if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && + (!interface->desc.bNumEndpoints || + usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { + dbg("class descriptor not present\n"); + return NULL; } for (n = 0; n < hdesc->bNumDescriptors; n++) @@ -1749,32 +1750,34 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) hid->name[0] = 0; - if (!(buf = kmalloc(64, GFP_KERNEL))) - goto fail; + if (dev->manufacturer) + strlcpy(hid->name, dev->manufacturer, sizeof(hid->name)); + + if (dev->product) { + if (dev->manufacturer) + strlcat(hid->name, " ", sizeof(hid->name)); + strlcat(hid->name, dev->product, sizeof(hid->name)); + } + + if (!strlen(hid->name)) + snprintf(hid->name, sizeof(hid->name), "HID %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); - if (dev->manufacturer) { - strcat(hid->name, dev->manufacturer); - if (dev->product) - snprintf(hid->name, 64, "%s %s", hid->name, dev->product); - } else if (dev->product) { - snprintf(hid->name, 128, "%s", dev->product); - } else - snprintf(hid->name, 128, "%04x:%04x", - le16_to_cpu(dev->descriptor.idVendor), - le16_to_cpu(dev->descriptor.idProduct)); - - usb_make_path(dev, buf, 64); - snprintf(hid->phys, 64, "%s/input%d", buf, - intf->altsetting[0].desc.bInterfaceNumber); + usb_make_path(dev, hid->phys, sizeof(hid->phys)); + strlcat(hid->phys, "/input", sizeof(hid->phys)); + len = strlen(hid->phys); + if (len < sizeof(hid->phys) - 1) + snprintf(hid->phys + len, sizeof(hid->phys) - len, + "%d", intf->altsetting[0].desc.bInterfaceNumber); if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0) hid->uniq[0] = 0; - kfree(buf); - hid->urbctrl = usb_alloc_urb(0, GFP_KERNEL); if (!hid->urbctrl) goto fail; + usb_fill_control_urb(hid->urbctrl, dev, 0, (void *) hid->cr, hid->ctrlbuf, 1, hid_ctrl, hid); hid->urbctrl->setup_dma = hid->cr_dma; diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c index 0b6452248a39..9ff25eb520a6 100644 --- a/drivers/usb/input/hid-input.c +++ b/drivers/usb/input/hid-input.c @@ -76,8 +76,8 @@ static struct { static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field, struct hid_usage *usage) { - struct input_dev *input = &hidinput->input; - struct hid_device *device = hidinput->input.private; + struct input_dev *input = hidinput->input; + struct hid_device *device = input->private; int max = 0, code; unsigned long *bit = NULL; @@ -461,7 +461,8 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct if (!field->hidinput) return; - input = &field->hidinput->input; + + input = field->hidinput->input; input_regs(input, regs); @@ -533,13 +534,10 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct void hidinput_report_event(struct hid_device *hid, struct hid_report *report) { - struct list_head *lh; struct hid_input *hidinput; - list_for_each (lh, &hid->inputs) { - hidinput = list_entry(lh, struct hid_input, list); - input_sync(&hidinput->input); - } + list_for_each_entry(hidinput, &hid->inputs, list) + input_sync(hidinput->input); } static int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field) @@ -604,6 +602,7 @@ int hidinput_connect(struct hid_device *hid) struct usb_device *dev = hid->dev; struct hid_report *report; struct hid_input *hidinput = NULL; + struct input_dev *input_dev; int i, j, k; INIT_LIST_HEAD(&hid->inputs); @@ -624,25 +623,28 @@ int hidinput_connect(struct hid_device *hid) continue; if (!hidinput) { - hidinput = kmalloc(sizeof(*hidinput), GFP_KERNEL); - if (!hidinput) { + hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!hidinput || !input_dev) { + kfree(hidinput); + input_free_device(input_dev); err("Out of memory during hid input probe"); return -1; } - memset(hidinput, 0, sizeof(*hidinput)); - list_add_tail(&hidinput->list, &hid->inputs); + input_dev->private = hid; + input_dev->event = hidinput_input_event; + input_dev->open = hidinput_open; + input_dev->close = hidinput_close; - hidinput->input.private = hid; - hidinput->input.event = hidinput_input_event; - hidinput->input.open = hidinput_open; - hidinput->input.close = hidinput_close; + input_dev->name = hid->name; + input_dev->phys = hid->phys; + input_dev->uniq = hid->uniq; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &hid->intf->dev; - hidinput->input.name = hid->name; - hidinput->input.phys = hid->phys; - hidinput->input.uniq = hid->uniq; - usb_to_input_id(dev, &hidinput->input.id); - hidinput->input.dev = &hid->intf->dev; + hidinput->input = input_dev; + list_add_tail(&hidinput->list, &hid->inputs); } for (i = 0; i < report->maxfield; i++) @@ -657,7 +659,7 @@ int hidinput_connect(struct hid_device *hid) * UGCI) cram a lot of unrelated inputs into the * same interface. */ hidinput->report = report; - input_register_device(&hidinput->input); + input_register_device(hidinput->input); hidinput = NULL; } } @@ -667,7 +669,7 @@ int hidinput_connect(struct hid_device *hid) * only useful in this case, and not for multi-input quirks. */ if (hidinput) { hid_ff_init(hid); - input_register_device(&hidinput->input); + input_register_device(hidinput->input); } return 0; @@ -675,13 +677,11 @@ int hidinput_connect(struct hid_device *hid) void hidinput_disconnect(struct hid_device *hid) { - struct list_head *lh, *next; - struct hid_input *hidinput; + struct hid_input *hidinput, *next; - list_for_each_safe(lh, next, &hid->inputs) { - hidinput = list_entry(lh, struct hid_input, list); - input_unregister_device(&hidinput->input); + list_for_each_entry_safe(hidinput, next, &hid->inputs, list) { list_del(&hidinput->list); + input_unregister_device(hidinput->input); kfree(hidinput); } } diff --git a/drivers/usb/input/hid-lgff.c b/drivers/usb/input/hid-lgff.c index 0c4c77aa31ea..f82c9c9e5d51 100644 --- a/drivers/usb/input/hid-lgff.c +++ b/drivers/usb/input/hid-lgff.c @@ -255,22 +255,19 @@ static void hid_lgff_input_init(struct hid_device* hid) u16 idVendor = le16_to_cpu(hid->dev->descriptor.idVendor); u16 idProduct = le16_to_cpu(hid->dev->descriptor.idProduct); struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; while (dev->idVendor && (idVendor != dev->idVendor || idProduct != dev->idProduct)) dev++; - ff = dev->ff; + for (ff = dev->ff; *ff >= 0; ff++) + set_bit(*ff, input_dev->ffbit); - while (*ff >= 0) { - set_bit(*ff, hidinput->input.ffbit); - ++ff; - } - - hidinput->input.upload_effect = hid_lgff_upload_effect; - hidinput->input.flush = hid_lgff_flush; + input_dev->upload_effect = hid_lgff_upload_effect; + input_dev->flush = hid_lgff_flush; - set_bit(EV_FF, hidinput->input.evbit); - hidinput->input.ff_effects_max = LGFF_EFFECTS; + set_bit(EV_FF, input_dev->evbit); + input_dev->ff_effects_max = LGFF_EFFECTS; } static void hid_lgff_exit(struct hid_device* hid) diff --git a/drivers/usb/input/hid-tmff.c b/drivers/usb/input/hid-tmff.c index 8f6a0a6f94a9..023fd5ac31c8 100644 --- a/drivers/usb/input/hid-tmff.c +++ b/drivers/usb/input/hid-tmff.c @@ -111,6 +111,7 @@ int hid_tmff_init(struct hid_device *hid) struct tmff_device *private; struct list_head *pos; struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; private = kmalloc(sizeof(struct tmff_device), GFP_KERNEL); if (!private) @@ -155,7 +156,7 @@ int hid_tmff_init(struct hid_device *hid) private->report = report; private->rumble = field; - set_bit(FF_RUMBLE, hidinput->input.ffbit); + set_bit(FF_RUMBLE, input_dev->ffbit); break; default: @@ -164,11 +165,11 @@ int hid_tmff_init(struct hid_device *hid) } /* Fallthrough to here only when a valid usage is found */ - hidinput->input.upload_effect = hid_tmff_upload_effect; - hidinput->input.flush = hid_tmff_flush; + input_dev->upload_effect = hid_tmff_upload_effect; + input_dev->flush = hid_tmff_flush; - set_bit(EV_FF, hidinput->input.evbit); - hidinput->input.ff_effects_max = TMFF_EFFECTS; + set_bit(EV_FF, input_dev->evbit); + input_dev->ff_effects_max = TMFF_EFFECTS; } } diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h index ec2412c42f1e..ee48a2276104 100644 --- a/drivers/usb/input/hid.h +++ b/drivers/usb/input/hid.h @@ -371,7 +371,7 @@ struct hid_control_fifo { struct hid_input { struct list_head list; struct hid_report *report; - struct input_dev input; + struct input_dev *input; }; struct hid_device { /* device report descriptor */ diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index becb87efb869..3b581853cf10 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -73,7 +73,7 @@ MODULE_LICENSE( DRIVER_LICENSE ); struct itmtouch_dev { struct usb_device *usbdev; /* usb device */ - struct input_dev inputdev; /* input device */ + struct input_dev *inputdev; /* input device */ struct urb *readurb; /* urb */ char rbuf[ITM_BUFSIZE]; /* data */ int users; @@ -88,9 +88,9 @@ static struct usb_device_id itmtouch_ids [] = { static void itmtouch_irq(struct urb *urb, struct pt_regs *regs) { - struct itmtouch_dev * itmtouch = urb->context; + struct itmtouch_dev *itmtouch = urb->context; unsigned char *data = urb->transfer_buffer; - struct input_dev *dev = &itmtouch->inputdev; + struct input_dev *dev = itmtouch->inputdev; int retval; switch (urb->status) { @@ -156,49 +156,62 @@ static void itmtouch_close(struct input_dev *input) static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct itmtouch_dev *itmtouch; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); unsigned int pipe; unsigned int maxp; - char path[PATH_SIZE]; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL))) { + itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!itmtouch || !input_dev) { err("%s - Out of memory.", __FUNCTION__); - return -ENOMEM; + goto fail; } itmtouch->usbdev = udev; + itmtouch->inputdev = input_dev; - itmtouch->inputdev.private = itmtouch; - itmtouch->inputdev.open = itmtouch_open; - itmtouch->inputdev.close = itmtouch_close; + if (udev->manufacturer) + strlcpy(itmtouch->name, udev->manufacturer, sizeof(itmtouch->name)); - usb_make_path(udev, path, PATH_SIZE); - - itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - itmtouch->inputdev.name = itmtouch->name; - itmtouch->inputdev.phys = itmtouch->phys; - usb_to_input_id(udev, &itmtouch->inputdev.id); - itmtouch->inputdev.dev = &intf->dev; + if (udev->product) { + if (udev->manufacturer) + strlcat(itmtouch->name, " ", sizeof(itmtouch->name)); + strlcat(itmtouch->name, udev->product, sizeof(itmtouch->name)); + } if (!strlen(itmtouch->name)) sprintf(itmtouch->name, "USB ITM touchscreen"); + usb_make_path(udev, itmtouch->phys, sizeof(itmtouch->phys)); + strlcpy(itmtouch->phys, "/input0", sizeof(itmtouch->phys)); + + input_dev->name = itmtouch->name; + input_dev->phys = itmtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = itmtouch; + + input_dev->open = itmtouch_open; + input_dev->close = itmtouch_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + /* device limits */ /* as specified by the ITM datasheet, X and Y are 12bit, * Z (pressure) is 8 bit. However, the fields are defined up * to 14 bits for future possible expansion. */ - input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0); - input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0); - input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0); + input_set_abs_params(input_dev, ABS_X, 0, 0x0FFF, 2, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x0FFF, 2, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 2, 0); /* initialise the URB so we can read from the transport stream */ pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress); @@ -208,22 +221,23 @@ static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id maxp = ITM_BUFSIZE; itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL); - if (!itmtouch->readurb) { dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__); - kfree(itmtouch); - return -ENOMEM; + goto fail; } usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf, maxp, itmtouch_irq, itmtouch, endpoint->bInterval); - input_register_device(&itmtouch->inputdev); + input_register_device(itmtouch->inputdev); - printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path); usb_set_intfdata(intf, itmtouch); return 0; + + fail: input_free_device(input_dev); + kfree(itmtouch); + return -ENOMEM; } static void itmtouch_disconnect(struct usb_interface *intf) @@ -233,7 +247,7 @@ static void itmtouch_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (itmtouch) { - input_unregister_device(&itmtouch->inputdev); + input_unregister_device(itmtouch->inputdev); usb_kill_urb(itmtouch->readurb); usb_free_urb(itmtouch->readurb); kfree(itmtouch); diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c index b6f6ac8d9c2f..a248664b5d1d 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/usb/input/kbtab.c @@ -34,7 +34,7 @@ MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks"); struct kbtab { signed char *data; dma_addr_t data_dma; - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; struct urb *irq; int x, y; @@ -48,7 +48,7 @@ static void kbtab_irq(struct urb *urb, struct pt_regs *regs) { struct kbtab *kbtab = urb->context; unsigned char *data = kbtab->data; - struct input_dev *dev = &kbtab->dev; + struct input_dev *dev = kbtab->dev; int retval; switch (urb->status) { @@ -124,53 +124,43 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i struct usb_device *dev = interface_to_usbdev(intf); struct usb_endpoint_descriptor *endpoint; struct kbtab *kbtab; - char path[64]; + struct input_dev *input_dev; - if (!(kbtab = kmalloc(sizeof(struct kbtab), GFP_KERNEL))) - return -ENOMEM; - memset(kbtab, 0, sizeof(struct kbtab)); + kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbtab || !input_dev) + goto fail1; kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma); - if (!kbtab->data) { - kfree(kbtab); - return -ENOMEM; - } + if (!kbtab->data) + goto fail1; kbtab->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!kbtab->irq) { - usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma); - kfree(kbtab); - return -ENOMEM; - } - - kbtab->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); - kbtab->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - - kbtab->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - - kbtab->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); + if (!kbtab->irq) + goto fail2; - kbtab->dev.mscbit[0] |= BIT(MSC_SERIAL); - - kbtab->dev.absmax[ABS_X] = 0x2000; - kbtab->dev.absmax[ABS_Y] = 0x1750; - kbtab->dev.absmax[ABS_PRESSURE] = 0xff; + kbtab->usbdev = dev; + kbtab->dev = input_dev; - kbtab->dev.absfuzz[ABS_X] = 4; - kbtab->dev.absfuzz[ABS_Y] = 4; + usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys)); + strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys)); - kbtab->dev.private = kbtab; - kbtab->dev.open = kbtab_open; - kbtab->dev.close = kbtab_close; + input_dev->name = "KB Gear Tablet"; + input_dev->phys = kbtab->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = kbtab; - usb_make_path(dev, path, 64); - sprintf(kbtab->phys, "%s/input0", path); + input_dev->open = kbtab_open; + input_dev->close = kbtab_close; - kbtab->dev.name = "KB Gear Tablet"; - kbtab->dev.phys = kbtab->phys; - usb_to_input_id(dev, &kbtab->dev.id); - kbtab->dev.dev = &intf->dev; - kbtab->usbdev = dev; + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0); + input_set_abs_params(input_dev, ABS_X, 0, 0x1750, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0); endpoint = &intf->cur_altsetting->endpoint[0].desc; @@ -181,23 +171,25 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i kbtab->irq->transfer_dma = kbtab->data_dma; kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&kbtab->dev); - - printk(KERN_INFO "input: KB Gear Tablet on %s\n", path); + input_register_device(kbtab->dev); usb_set_intfdata(intf, kbtab); - return 0; + +fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma); +fail1: input_free_device(input_dev); + kfree(kbtab); + return -ENOMEM; } static void kbtab_disconnect(struct usb_interface *intf) { - struct kbtab *kbtab = usb_get_intfdata (intf); + struct kbtab *kbtab = usb_get_intfdata(intf); usb_set_intfdata(intf, NULL); if (kbtab) { usb_kill_urb(kbtab->irq); - input_unregister_device(&kbtab->dev); + input_unregister_device(kbtab->dev); usb_free_urb(kbtab->irq); usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma); kfree(kbtab); diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index 99de1b33c07d..5b8d65f62abf 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -20,6 +20,7 @@ #include <linux/moduleparam.h> #include <linux/input.h> #include <linux/usb.h> +#include <linux/usb_input.h> #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>" @@ -75,7 +76,7 @@ struct usb_keyspan { char name[128]; char phys[64]; struct usb_device* udev; - struct input_dev input; + struct input_dev *input; struct usb_interface* interface; struct usb_endpoint_descriptor* in_endpoint; struct urb* irq_urb; @@ -136,12 +137,11 @@ static struct usb_driver keyspan_driver; */ static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ { - char codes[4*RECV_SIZE]; + char codes[4 * RECV_SIZE]; int i; - for (i = 0; i < RECV_SIZE; i++) { - snprintf(codes+i*3, 4, "%02x ", dev->in_buffer[i]); - } + for (i = 0; i < RECV_SIZE; i++) + snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]); dev_info(&dev->udev->dev, "%s\n", codes); } @@ -153,7 +153,7 @@ static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) { if (dev->data.bits_left >= bits_needed) - return(0); + return 0; /* * Somehow we've missed the last message. The message will be repeated @@ -162,7 +162,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) if (dev->data.pos >= dev->data.len) { dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n", __FUNCTION__, dev->data.pos, dev->data.len); - return(-1); + return -1; } /* Load as much as we can into the tester. */ @@ -172,7 +172,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) dev->data.bits_left += 8; } - return(0); + return 0; } /* @@ -311,10 +311,10 @@ static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs) __FUNCTION__, message.system, message.button, message.toggle); if (message.toggle != remote->toggle) { - input_regs(&remote->input, regs); - input_report_key(&remote->input, keyspan_key_table[message.button], 1); - input_report_key(&remote->input, keyspan_key_table[message.button], 0); - input_sync(&remote->input); + input_regs(remote->input, regs); + input_report_key(remote->input, keyspan_key_table[message.button], 1); + input_report_key(remote->input, keyspan_key_table[message.button], 0); + input_sync(remote->input); remote->toggle = message.toggle; } @@ -397,14 +397,9 @@ static int keyspan_open(struct input_dev *dev) { struct usb_keyspan *remote = dev->private; - if (remote->open++) - return 0; - remote->irq_urb->dev = remote->udev; - if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) { - remote->open--; + if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) return -EIO; - } return 0; } @@ -413,8 +408,26 @@ static void keyspan_close(struct input_dev *dev) { struct usb_keyspan *remote = dev->private; - if (!--remote->open) - usb_kill_urb(remote->irq_urb); + usb_kill_urb(remote->irq_urb); +} + +static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface) +{ + + struct usb_endpoint_descriptor *endpoint; + int i; + + for (i = 0; i < iface->desc.bNumEndpoints; ++i) { + endpoint = &iface->endpoint[i].desc; + + if ((endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + /* we found our interrupt in endpoint */ + return endpoint; + } + } + + return NULL; } /* @@ -422,110 +435,78 @@ static void keyspan_close(struct input_dev *dev) */ static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id) { - int i; - int retval = -ENOMEM; - char path[64]; - char *buf; - struct usb_keyspan *remote = NULL; - struct usb_host_interface *iface_desc; + struct usb_device *udev = interface_to_usbdev(interface); struct usb_endpoint_descriptor *endpoint; - struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); + struct usb_keyspan *remote; + struct input_dev *input_dev; + int i, retval; - /* allocate memory for our device state and initialize it */ - remote = kmalloc(sizeof(*remote), GFP_KERNEL); - if (remote == NULL) { - err("Out of memory\n"); - goto error; + endpoint = keyspan_get_in_endpoint(interface->cur_altsetting); + if (!endpoint) + return -ENODEV; + + remote = kzalloc(sizeof(*remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!remote || !input_dev) { + retval = -ENOMEM; + goto fail1; } - memset(remote, 0x00, sizeof(*remote)); remote->udev = udev; + remote->input = input_dev; remote->interface = interface; + remote->in_endpoint = endpoint; remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */ - /* set up the endpoint information */ - /* use only the first in interrupt endpoint */ - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (!remote->in_endpoint && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { - /* we found our interrupt in endpoint */ - remote->in_endpoint = endpoint; - - remote->in_buffer = usb_buffer_alloc(remote->udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma); - if (!remote->in_buffer) { - retval = -ENOMEM; - goto error; - } - } - } - - if (!remote->in_endpoint) { - err("Could not find interrupt input endpoint.\n"); - retval = -ENODEV; - goto error; + remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma); + if (!remote->in_buffer) { + retval = -ENOMEM; + goto fail1; } remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); if (!remote->irq_urb) { - err("Failed to allocate urb.\n"); retval = -ENOMEM; - goto error; + goto fail2; } - retval = keyspan_setup(remote->udev); + retval = keyspan_setup(udev); if (retval) { - err("Failed to setup device.\n"); retval = -ENODEV; - goto error; - } - - /* - * Setup the input system with the bits we are going to be reporting - */ - remote->input.evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ - for (i = 0; i < 32; ++i) { - if (keyspan_key_table[i] != KEY_RESERVED) { - set_bit(keyspan_key_table[i], remote->input.keybit); - } + goto fail3; } - remote->input.private = remote; - remote->input.open = keyspan_open; - remote->input.close = keyspan_close; - - usb_make_path(remote->udev, path, 64); - sprintf(remote->phys, "%s/input0", path); + if (udev->manufacturer) + strlcpy(remote->name, udev->manufacturer, sizeof(remote->name)); - remote->input.name = remote->name; - remote->input.phys = remote->phys; - remote->input.id.bustype = BUS_USB; - remote->input.id.vendor = le16_to_cpu(remote->udev->descriptor.idVendor); - remote->input.id.product = le16_to_cpu(remote->udev->descriptor.idProduct); - remote->input.id.version = le16_to_cpu(remote->udev->descriptor.bcdDevice); - - if (!(buf = kmalloc(63, GFP_KERNEL))) { - usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); - kfree(remote); - return -ENOMEM; + if (udev->product) { + if (udev->manufacturer) + strlcat(remote->name, " ", sizeof(remote->name)); + strlcat(remote->name, udev->product, sizeof(remote->name)); } - if (remote->udev->descriptor.iManufacturer && - usb_string(remote->udev, remote->udev->descriptor.iManufacturer, buf, 63) > 0) - strcat(remote->name, buf); + if (!strlen(remote->name)) + snprintf(remote->name, sizeof(remote->name), + "USB Keyspan Remote %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); - if (remote->udev->descriptor.iProduct && - usb_string(remote->udev, remote->udev->descriptor.iProduct, buf, 63) > 0) - sprintf(remote->name, "%s %s", remote->name, buf); + usb_make_path(udev, remote->phys, sizeof(remote->phys)); + strlcat(remote->phys, "/input0", sizeof(remote->phys)); - if (!strlen(remote->name)) - sprintf(remote->name, "USB Keyspan Remote %04x:%04x", - remote->input.id.vendor, remote->input.id.product); + input_dev->name = remote->name; + input_dev->phys = remote->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &interface->dev; - kfree(buf); + input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ + for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++) + if (keyspan_key_table[i] != KEY_RESERVED) + set_bit(keyspan_key_table[i], input_dev->keybit); + + input_dev->private = remote; + input_dev->open = keyspan_open; + input_dev->close = keyspan_close; /* * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open() @@ -538,27 +519,17 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; /* we can register the device now, as it is ready */ - input_register_device(&remote->input); + input_register_device(remote->input); /* save our data pointer in this interface device */ usb_set_intfdata(interface, remote); - /* let the user know what node this device is now attached to */ - info("connected: %s on %s", remote->name, path); return 0; -error: - /* - * In case of error we need to clean up any allocated buffers - */ - if (remote->irq_urb) - usb_free_urb(remote->irq_urb); - - if (remote->in_buffer) - usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); - - if (remote) - kfree(remote); + fail3: usb_free_urb(remote->irq_urb); + fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + fail1: kfree(remote); + input_free_device(input_dev); return retval; } @@ -570,23 +541,16 @@ static void keyspan_disconnect(struct usb_interface *interface) { struct usb_keyspan *remote; - /* prevent keyspan_open() from racing keyspan_disconnect() */ - lock_kernel(); - remote = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); if (remote) { /* We have a valid driver structure so clean up everything we allocated. */ - input_unregister_device(&remote->input); + input_unregister_device(remote->input); usb_kill_urb(remote->irq_urb); usb_free_urb(remote->irq_urb); - usb_buffer_free(interface_to_usbdev(interface), RECV_SIZE, remote->in_buffer, remote->in_dma); + usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); kfree(remote); } - - unlock_kernel(); - - info("USB Keyspan now disconnected"); } /* diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index ff9275057a18..7fce526560ca 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -98,7 +98,7 @@ struct mtouch_usb { dma_addr_t data_dma; struct urb *irq; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; char name[128]; char phys[64]; }; @@ -135,14 +135,14 @@ static void mtouchusb_irq(struct urb *urb, struct pt_regs *regs) goto exit; } - input_regs(&mtouch->input, regs); - input_report_key(&mtouch->input, BTN_TOUCH, + input_regs(mtouch->input, regs); + input_report_key(mtouch->input, BTN_TOUCH, MTOUCHUSB_GET_TOUCHED(mtouch->data)); - input_report_abs(&mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data)); - input_report_abs(&mtouch->input, ABS_Y, + input_report_abs(mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data)); + input_report_abs(mtouch->input, ABS_Y, (raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC) - MTOUCHUSB_GET_YC(mtouch->data)); - input_sync(&mtouch->input); + input_sync(mtouch->input); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -195,10 +195,10 @@ static void mtouchusb_free_buffers(struct usb_device *udev, struct mtouch_usb *m static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct mtouch_usb *mtouch; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); - char path[64]; int nRet; dbg("%s - called", __FUNCTION__); @@ -209,57 +209,55 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i dbg("%s - setting endpoint", __FUNCTION__); endpoint = &interface->endpoint[0].desc; - if (!(mtouch = kmalloc(sizeof(struct mtouch_usb), GFP_KERNEL))) { + mtouch = kzalloc(sizeof(struct mtouch_usb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mtouch || !input_dev) { err("%s - Out of memory.", __FUNCTION__); - return -ENOMEM; + goto fail1; } - memset(mtouch, 0, sizeof(struct mtouch_usb)); - mtouch->udev = udev; - dbg("%s - allocating buffers", __FUNCTION__); - if (mtouchusb_alloc_buffers(udev, mtouch)) { - mtouchusb_free_buffers(udev, mtouch); - kfree(mtouch); - return -ENOMEM; - } + if (mtouchusb_alloc_buffers(udev, mtouch)) + goto fail2; - mtouch->input.private = mtouch; - mtouch->input.open = mtouchusb_open; - mtouch->input.close = mtouchusb_close; - - usb_make_path(udev, path, 64); - sprintf(mtouch->phys, "%s/input0", path); - - mtouch->input.name = mtouch->name; - mtouch->input.phys = mtouch->phys; - usb_to_input_id(udev, &mtouch->input.id); - mtouch->input.dev = &intf->dev; - - mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - mtouch->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - mtouch->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - /* Used to Scale Compensated Data and Flip Y */ - mtouch->input.absmin[ABS_X] = MTOUCHUSB_MIN_XC; - mtouch->input.absmax[ABS_X] = raw_coordinates ? - MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC; - mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ; - mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT; - mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC; - mtouch->input.absmax[ABS_Y] = raw_coordinates ? - MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC; - mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ; - mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT; + mtouch->udev = udev; + mtouch->input = input_dev; if (udev->manufacturer) - strcat(mtouch->name, udev->manufacturer); - if (udev->product) - sprintf(mtouch->name, "%s %s", mtouch->name, udev->product); + strlcpy(mtouch->name, udev->manufacturer, sizeof(mtouch->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(mtouch->name, " ", sizeof(mtouch->name)); + strlcat(mtouch->name, udev->product, sizeof(mtouch->name)); + } if (!strlen(mtouch->name)) - sprintf(mtouch->name, "USB Touchscreen %04x:%04x", - mtouch->input.id.vendor, mtouch->input.id.product); + snprintf(mtouch->name, sizeof(mtouch->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, mtouch->phys, sizeof(mtouch->phys)); + strlcpy(mtouch->phys, "/input0", sizeof(mtouch->phys)); + + input_dev->name = mtouch->name; + input_dev->phys = mtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = mtouch; + + input_dev->open = mtouchusb_open; + input_dev->close = mtouchusb_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, MTOUCHUSB_MIN_XC, + raw_coordinates ? MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC, + MTOUCHUSB_XC_FUZZ, MTOUCHUSB_XC_FLAT); + input_set_abs_params(input_dev, ABS_Y, MTOUCHUSB_MIN_YC, + raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC, + MTOUCHUSB_YC_FUZZ, MTOUCHUSB_YC_FLAT); nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0), MTOUCHUSB_RESET, @@ -272,9 +270,7 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i mtouch->irq = usb_alloc_urb(0, GFP_KERNEL); if (!mtouch->irq) { dbg("%s - usb_alloc_urb failed: mtouch->irq", __FUNCTION__); - mtouchusb_free_buffers(udev, mtouch); - kfree(mtouch); - return -ENOMEM; + goto fail2; } dbg("%s - usb_fill_int_urb", __FUNCTION__); @@ -284,7 +280,7 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i mtouchusb_irq, mtouch, endpoint->bInterval); dbg("%s - input_register_device", __FUNCTION__); - input_register_device(&mtouch->input); + input_register_device(mtouch->input); nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0), MTOUCHUSB_ASYNC_REPORT, @@ -293,10 +289,13 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", __FUNCTION__, nRet); - printk(KERN_INFO "input: %s on %s\n", mtouch->name, path); usb_set_intfdata(intf, mtouch); - return 0; + +fail2: mtouchusb_free_buffers(udev, mtouch); +fail1: input_free_device(input_dev); + kfree(mtouch); + return -ENOMEM; } static void mtouchusb_disconnect(struct usb_interface *intf) @@ -308,7 +307,7 @@ static void mtouchusb_disconnect(struct usb_interface *intf) if (mtouch) { dbg("%s - mtouch is initialized, cleaning up", __FUNCTION__); usb_kill_urb(mtouch->irq); - input_unregister_device(&mtouch->input); + input_unregister_device(mtouch->input); usb_free_urb(mtouch->irq); mtouchusb_free_buffers(interface_to_usbdev(intf), mtouch); kfree(mtouch); diff --git a/drivers/usb/input/pid.c b/drivers/usb/input/pid.c index acc71ec560e9..a00672c96644 100644 --- a/drivers/usb/input/pid.c +++ b/drivers/usb/input/pid.c @@ -262,6 +262,7 @@ int hid_pid_init(struct hid_device *hid) { struct hid_ff_pid *private; struct hid_input *hidinput = list_entry(&hid->inputs, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; private = hid->ff_private = kzalloc(sizeof(struct hid_ff_pid), GFP_KERNEL); if (!private) @@ -281,11 +282,12 @@ int hid_pid_init(struct hid_device *hid) usb_fill_control_urb(private->urbffout, hid->dev, 0, (void *)&private->ffcr, private->ctrl_buffer, 8, hid_pid_ctrl_out, hid); - hidinput->input.upload_effect = hid_pid_upload_effect; - hidinput->input.flush = hid_pid_flush; - hidinput->input.ff_effects_max = 8; // A random default - set_bit(EV_FF, hidinput->input.evbit); - set_bit(EV_FF_STATUS, hidinput->input.evbit); + + input_dev->upload_effect = hid_pid_upload_effect; + input_dev->flush = hid_pid_flush; + input_dev->ff_effects_max = 8; // A random default + set_bit(EV_FF, input_dev->evbit); + set_bit(EV_FF_STATUS, input_dev->evbit); spin_lock_init(&private->lock); diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c index ad4afe7e5897..b7476233ef5d 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/usb/input/powermate.c @@ -68,7 +68,7 @@ struct powermate_device { struct usb_ctrlrequest *configcr; dma_addr_t configcr_dma; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; spinlock_t lock; int static_brightness; int pulse_speed; @@ -106,10 +106,10 @@ static void powermate_irq(struct urb *urb, struct pt_regs *regs) } /* handle updates to device state */ - input_regs(&pm->input, regs); - input_report_key(&pm->input, BTN_0, pm->data[0] & 0x01); - input_report_rel(&pm->input, REL_DIAL, pm->data[1]); - input_sync(&pm->input); + input_regs(pm->input, regs); + input_report_key(pm->input, BTN_0, pm->data[0] & 0x01); + input_report_rel(pm->input, REL_DIAL, pm->data[1]); + input_sync(pm->input); exit: retval = usb_submit_urb (urb, GFP_ATOMIC); @@ -153,10 +153,10 @@ static void powermate_sync_state(struct powermate_device *pm) Only values of 'arg' quite close to 255 are particularly useful/spectacular. */ - if (pm->pulse_speed < 255){ + if (pm->pulse_speed < 255) { op = 0; // divide arg = 255 - pm->pulse_speed; - } else if (pm->pulse_speed > 255){ + } else if (pm->pulse_speed > 255) { op = 2; // multiply arg = pm->pulse_speed - 255; } else { @@ -166,11 +166,11 @@ static void powermate_sync_state(struct powermate_device *pm) pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE ); pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op ); pm->requires_update &= ~UPDATE_PULSE_MODE; - }else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS){ + } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) { pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS ); pm->configcr->wIndex = cpu_to_le16( pm->static_brightness ); pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS; - }else{ + } else { printk(KERN_ERR "powermate: unknown update required"); pm->requires_update = 0; /* fudge the bug */ return; @@ -228,19 +228,19 @@ static void powermate_pulse_led(struct powermate_device *pm, int static_brightne spin_lock_irqsave(&pm->lock, flags); /* mark state updates which are required */ - if (static_brightness != pm->static_brightness){ + if (static_brightness != pm->static_brightness) { pm->static_brightness = static_brightness; pm->requires_update |= UPDATE_STATIC_BRIGHTNESS; } - if (pulse_asleep != pm->pulse_asleep){ + if (pulse_asleep != pm->pulse_asleep) { pm->pulse_asleep = pulse_asleep; pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS); } - if (pulse_awake != pm->pulse_awake){ + if (pulse_awake != pm->pulse_awake) { pm->pulse_awake = pulse_awake; pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS); } - if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table){ + if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) { pm->pulse_speed = pulse_speed; pm->pulse_table = pulse_table; pm->requires_update |= UPDATE_PULSE_MODE; @@ -283,6 +283,7 @@ static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_dev SLAB_ATOMIC, &pm->data_dma); if (!pm->data) return -1; + pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)), SLAB_ATOMIC, &pm->configcr_dma); if (!pm->configcr) @@ -308,8 +309,9 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct powermate_device *pm; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; + int err = -ENOMEM; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; @@ -323,42 +325,61 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i 0, interface->desc.bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (!(pm = kmalloc(sizeof(struct powermate_device), GFP_KERNEL))) - return -ENOMEM; - - memset(pm, 0, sizeof(struct powermate_device)); - pm->udev = udev; + pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pm || !input_dev) + goto fail1; - if (powermate_alloc_buffers(udev, pm)) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (powermate_alloc_buffers(udev, pm)) + goto fail2; pm->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!pm->irq) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (!pm->irq) + goto fail2; pm->config = usb_alloc_urb(0, GFP_KERNEL); - if (!pm->config) { - usb_free_urb(pm->irq); - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (!pm->config) + goto fail3; + + pm->udev = udev; + pm->input = input_dev; + + usb_make_path(udev, pm->phys, sizeof(pm->phys)); + strlcpy(pm->phys, "/input0", sizeof(pm->phys)); spin_lock_init(&pm->lock); - init_input_dev(&pm->input); + + switch (le16_to_cpu(udev->descriptor.idProduct)) { + case POWERMATE_PRODUCT_NEW: + input_dev->name = pm_name_powermate; + break; + case POWERMATE_PRODUCT_OLD: + input_dev->name = pm_name_soundknob; + break; + default: + input_dev->name = pm_name_soundknob; + printk(KERN_WARNING "powermate: unknown product id %04x\n", + le16_to_cpu(udev->descriptor.idProduct)); + } + + input_dev->phys = pm->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = pm; + + input_dev->event = powermate_input_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); + input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); /* get a handle to the interrupt data pipe */ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - if(maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX){ - printk("powermate: Expected payload of %d--%d bytes, found %d bytes!\n", + if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) { + printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n", POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp); maxp = POWERMATE_PAYLOAD_SIZE_MAX; } @@ -371,35 +392,11 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i /* register our interrupt URB with the USB system */ if (usb_submit_urb(pm->irq, GFP_KERNEL)) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -EIO; /* failure */ + err = -EIO; + goto fail4; } - switch (le16_to_cpu(udev->descriptor.idProduct)) { - case POWERMATE_PRODUCT_NEW: pm->input.name = pm_name_powermate; break; - case POWERMATE_PRODUCT_OLD: pm->input.name = pm_name_soundknob; break; - default: - pm->input.name = pm_name_soundknob; - printk(KERN_WARNING "powermate: unknown product id %04x\n", - le16_to_cpu(udev->descriptor.idProduct)); - } - - pm->input.private = pm; - pm->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC); - pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0); - pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); - pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); - usb_to_input_id(udev, &pm->input.id); - pm->input.event = powermate_input_event; - pm->input.dev = &intf->dev; - pm->input.phys = pm->phys; - - input_register_device(&pm->input); - - usb_make_path(udev, path, 64); - snprintf(pm->phys, 64, "%s/input0", path); - printk(KERN_INFO "input: %s on %s\n", pm->input.name, pm->input.phys); + input_register_device(pm->input); /* force an update of everything */ pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS; @@ -407,6 +404,13 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i usb_set_intfdata(intf, pm); return 0; + +fail4: usb_free_urb(pm->config); +fail3: usb_free_urb(pm->irq); +fail2: powermate_free_buffers(udev, pm); +fail1: input_free_device(input_dev); + kfree(pm); + return err; } /* Called when a USB device we've accepted ownership of is removed */ @@ -418,7 +422,7 @@ static void powermate_disconnect(struct usb_interface *intf) if (pm) { pm->requires_update = 0; usb_kill_urb(pm->irq); - input_unregister_device(&pm->input); + input_unregister_device(pm->input); usb_free_urb(pm->irq); usb_free_urb(pm->config); powermate_free_buffers(interface_to_usbdev(intf), pm); diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 4276c24a5080..3766ccc271be 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -68,7 +68,7 @@ struct touchkit_usb { dma_addr_t data_dma; struct urb *irq; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; char name[128]; char phys[64]; }; @@ -115,12 +115,12 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs) y = TOUCHKIT_GET_Y(touchkit->data); } - input_regs(&touchkit->input, regs); - input_report_key(&touchkit->input, BTN_TOUCH, + input_regs(touchkit->input, regs); + input_report_key(touchkit->input, BTN_TOUCH, TOUCHKIT_GET_TOUCHED(touchkit->data)); - input_report_abs(&touchkit->input, ABS_X, x); - input_report_abs(&touchkit->input, ABS_Y, y); - input_sync(&touchkit->input); + input_report_abs(touchkit->input, ABS_X, x); + input_report_abs(touchkit->input, ABS_Y, y); + input_sync(touchkit->input); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -171,87 +171,81 @@ static void touchkit_free_buffers(struct usb_device *udev, static int touchkit_probe(struct usb_interface *intf, const struct usb_device_id *id) { - int ret; struct touchkit_usb *touchkit; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); - char path[64]; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - touchkit = kmalloc(sizeof(struct touchkit_usb), GFP_KERNEL); - if (!touchkit) - return -ENOMEM; - - memset(touchkit, 0, sizeof(struct touchkit_usb)); - touchkit->udev = udev; - - if (touchkit_alloc_buffers(udev, touchkit)) { - ret = -ENOMEM; + touchkit = kzalloc(sizeof(struct touchkit_usb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!touchkit || !input_dev) goto out_free; - } - - touchkit->input.private = touchkit; - touchkit->input.open = touchkit_open; - touchkit->input.close = touchkit_close; - - usb_make_path(udev, path, 64); - sprintf(touchkit->phys, "%s/input0", path); - - touchkit->input.name = touchkit->name; - touchkit->input.phys = touchkit->phys; - usb_to_input_id(udev, &touchkit->input.id); - touchkit->input.dev = &intf->dev; - - touchkit->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - touchkit->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - touchkit->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - /* Used to Scale Compensated Data */ - touchkit->input.absmin[ABS_X] = TOUCHKIT_MIN_XC; - touchkit->input.absmax[ABS_X] = TOUCHKIT_MAX_XC; - touchkit->input.absfuzz[ABS_X] = TOUCHKIT_XC_FUZZ; - touchkit->input.absflat[ABS_X] = TOUCHKIT_XC_FLAT; - touchkit->input.absmin[ABS_Y] = TOUCHKIT_MIN_YC; - touchkit->input.absmax[ABS_Y] = TOUCHKIT_MAX_YC; - touchkit->input.absfuzz[ABS_Y] = TOUCHKIT_YC_FUZZ; - touchkit->input.absflat[ABS_Y] = TOUCHKIT_YC_FLAT; - - if (udev->manufacturer) - strcat(touchkit->name, udev->manufacturer); - if (udev->product) - sprintf(touchkit->name, "%s %s", touchkit->name, udev->product); - if (!strlen(touchkit->name)) - sprintf(touchkit->name, "USB Touchscreen %04x:%04x", - touchkit->input.id.vendor, touchkit->input.id.product); + if (touchkit_alloc_buffers(udev, touchkit)) + goto out_free; touchkit->irq = usb_alloc_urb(0, GFP_KERNEL); if (!touchkit->irq) { dbg("%s - usb_alloc_urb failed: touchkit->irq", __FUNCTION__); - ret = -ENOMEM; goto out_free_buffers; } + touchkit->udev = udev; + touchkit->input = input_dev; + + if (udev->manufacturer) + strlcpy(touchkit->name, udev->manufacturer, sizeof(touchkit->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(touchkit->name, " ", sizeof(touchkit->name)); + strlcat(touchkit->name, udev->product, sizeof(touchkit->name)); + } + + if (!strlen(touchkit->name)) + snprintf(touchkit->name, sizeof(touchkit->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, touchkit->phys, sizeof(touchkit->phys)); + strlcpy(touchkit->phys, "/input0", sizeof(touchkit->phys)); + + input_dev->name = touchkit->name; + input_dev->phys = touchkit->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = touchkit; + input_dev->open = touchkit_open; + input_dev->close = touchkit_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, TOUCHKIT_MIN_XC, TOUCHKIT_MAX_XC, + TOUCHKIT_XC_FUZZ, TOUCHKIT_XC_FLAT); + input_set_abs_params(input_dev, ABS_Y, TOUCHKIT_MIN_YC, TOUCHKIT_MAX_YC, + TOUCHKIT_YC_FUZZ, TOUCHKIT_YC_FLAT); + usb_fill_int_urb(touchkit->irq, touchkit->udev, - usb_rcvintpipe(touchkit->udev, 0x81), - touchkit->data, TOUCHKIT_REPORT_DATA_SIZE, - touchkit_irq, touchkit, endpoint->bInterval); + usb_rcvintpipe(touchkit->udev, 0x81), + touchkit->data, TOUCHKIT_REPORT_DATA_SIZE, + touchkit_irq, touchkit, endpoint->bInterval); - input_register_device(&touchkit->input); + input_register_device(touchkit->input); - printk(KERN_INFO "input: %s on %s\n", touchkit->name, path); usb_set_intfdata(intf, touchkit); - return 0; out_free_buffers: touchkit_free_buffers(udev, touchkit); out_free: + input_free_device(input_dev); kfree(touchkit); - return ret; + return -ENOMEM; } static void touchkit_disconnect(struct usb_interface *intf) @@ -265,8 +259,8 @@ static void touchkit_disconnect(struct usb_interface *intf) dbg("%s - touchkit is initialized, cleaning up", __FUNCTION__); usb_set_intfdata(intf, NULL); - input_unregister_device(&touchkit->input); usb_kill_urb(touchkit->irq); + input_unregister_device(touchkit->input); usb_free_urb(touchkit->irq); touchkit_free_buffers(interface_to_usbdev(intf), touchkit); kfree(touchkit); diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index 28987f15eeee..226b6f90a907 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -66,7 +66,7 @@ static unsigned char usb_kbd_keycode[256] = { }; struct usb_kbd { - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; unsigned char old[8]; struct urb *irq, *led; @@ -99,29 +99,29 @@ static void usb_kbd_irq(struct urb *urb, struct pt_regs *regs) goto resubmit; } - input_regs(&kbd->dev, regs); + input_regs(kbd->dev, regs); for (i = 0; i < 8; i++) - input_report_key(&kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1); + input_report_key(kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1); for (i = 2; i < 8; i++) { if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == kbd->new + 8) { if (usb_kbd_keycode[kbd->old[i]]) - input_report_key(&kbd->dev, usb_kbd_keycode[kbd->old[i]], 0); + input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0); else info("Unknown key (scancode %#x) released.", kbd->old[i]); } if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) { if (usb_kbd_keycode[kbd->new[i]]) - input_report_key(&kbd->dev, usb_kbd_keycode[kbd->new[i]], 1); + input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1); else info("Unknown key (scancode %#x) pressed.", kbd->new[i]); } } - input_sync(&kbd->dev); + input_sync(kbd->dev); memcpy(kbd->old, kbd->new, 8); @@ -227,12 +227,12 @@ static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd) static int usb_kbd_probe(struct usb_interface *iface, const struct usb_device_id *id) { - struct usb_device * dev = interface_to_usbdev(iface); + struct usb_device *dev = interface_to_usbdev(iface); struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_kbd *kbd; + struct input_dev *input_dev; int i, pipe, maxp; - char path[64]; interface = iface->cur_altsetting; @@ -240,37 +240,59 @@ static int usb_kbd_probe(struct usb_interface *iface, return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - if (!(kbd = kmalloc(sizeof(struct usb_kbd), GFP_KERNEL))) - return -ENOMEM; - memset(kbd, 0, sizeof(struct usb_kbd)); + kbd = kzalloc(sizeof(struct usb_kbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbd || !input_dev) + goto fail1; - if (usb_kbd_alloc_mem(dev, kbd)) { - usb_kbd_free_mem(dev, kbd); - kfree(kbd); - return -ENOMEM; - } + if (usb_kbd_alloc_mem(dev, kbd)) + goto fail2; kbd->usbdev = dev; + kbd->dev = input_dev; + + if (dev->manufacturer) + strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name)); + + if (dev->product) { + if (dev->manufacturer) + strlcat(kbd->name, " ", sizeof(kbd->name)); + strlcat(kbd->name, dev->product, sizeof(kbd->name)); + } + + if (!strlen(kbd->name)) + snprintf(kbd->name, sizeof(kbd->name), + "USB HIDBP Keyboard %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + + usb_make_path(dev, kbd->phys, sizeof(kbd->phys)); + strlcpy(kbd->phys, "/input0", sizeof(kbd->phys)); - kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); - kbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA); + input_dev->name = kbd->name; + input_dev->phys = kbd->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &iface->dev; + input_dev->private = kbd; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); + input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA); for (i = 0; i < 255; i++) - set_bit(usb_kbd_keycode[i], kbd->dev.keybit); - clear_bit(0, kbd->dev.keybit); + set_bit(usb_kbd_keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); - kbd->dev.private = kbd; - kbd->dev.event = usb_kbd_event; - kbd->dev.open = usb_kbd_open; - kbd->dev.close = usb_kbd_close; + input_dev->event = usb_kbd_event; + input_dev->open = usb_kbd_open; + input_dev->close = usb_kbd_close; usb_fill_int_urb(kbd->irq, dev, pipe, kbd->new, (maxp > 8 ? 8 : maxp), @@ -284,37 +306,22 @@ static int usb_kbd_probe(struct usb_interface *iface, kbd->cr->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); kbd->cr->wLength = cpu_to_le16(1); - usb_make_path(dev, path, 64); - sprintf(kbd->phys, "%s/input0", path); - - kbd->dev.name = kbd->name; - kbd->dev.phys = kbd->phys; - usb_to_input_id(dev, &kbd->dev.id); - kbd->dev.dev = &iface->dev; - - if (dev->manufacturer) - strcat(kbd->name, dev->manufacturer); - if (dev->product) - sprintf(kbd->name, "%s %s", kbd->name, dev->product); - - if (!strlen(kbd->name)) - sprintf(kbd->name, "USB HIDBP Keyboard %04x:%04x", - kbd->dev.id.vendor, kbd->dev.id.product); - usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0), (void *) kbd->cr, kbd->leds, 1, usb_kbd_led, kbd); kbd->led->setup_dma = kbd->cr_dma; kbd->led->transfer_dma = kbd->leds_dma; - kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP - | URB_NO_SETUP_DMA_MAP); + kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP); - input_register_device(&kbd->dev); - - printk(KERN_INFO "input: %s on %s\n", kbd->name, path); + input_register_device(kbd->dev); usb_set_intfdata(iface, kbd); return 0; + +fail2: usb_kbd_free_mem(dev, kbd); +fail1: input_free_device(input_dev); + kfree(kbd); + return -ENOMEM; } static void usb_kbd_disconnect(struct usb_interface *intf) @@ -324,7 +331,7 @@ static void usb_kbd_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (kbd) { usb_kill_urb(kbd->irq); - input_unregister_device(&kbd->dev); + input_unregister_device(kbd->dev); usb_kbd_free_mem(interface_to_usbdev(intf), kbd); kfree(kbd); } diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index 4104dec847fb..230f6b1b314a 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -50,7 +50,7 @@ struct usb_mouse { char name[128]; char phys[64]; struct usb_device *usbdev; - struct input_dev dev; + struct input_dev *dev; struct urb *irq; signed char *data; @@ -61,7 +61,7 @@ static void usb_mouse_irq(struct urb *urb, struct pt_regs *regs) { struct usb_mouse *mouse = urb->context; signed char *data = mouse->data; - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; int status; switch (urb->status) { @@ -115,14 +115,14 @@ static void usb_mouse_close(struct input_dev *dev) usb_kill_urb(mouse->irq); } -static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_id * id) +static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct usb_device * dev = interface_to_usbdev(intf); + struct usb_device *dev = interface_to_usbdev(intf); struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_mouse *mouse; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; interface = intf->cur_altsetting; @@ -130,59 +130,62 @@ static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_ return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - if (!(mouse = kmalloc(sizeof(struct usb_mouse), GFP_KERNEL))) - return -ENOMEM; - memset(mouse, 0, sizeof(struct usb_mouse)); + mouse = kzalloc(sizeof(struct usb_mouse), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mouse || !input_dev) + goto fail1; mouse->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &mouse->data_dma); - if (!mouse->data) { - kfree(mouse); - return -ENOMEM; - } + if (!mouse->data) + goto fail1; mouse->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!mouse->irq) { - usb_buffer_free(dev, 8, mouse->data, mouse->data_dma); - kfree(mouse); - return -ENODEV; - } + if (!mouse->irq) + goto fail2; mouse->usbdev = dev; + mouse->dev = input_dev; + + if (dev->manufacturer) + strlcpy(mouse->name, dev->manufacturer, sizeof(mouse->name)); - mouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - mouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - mouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - mouse->dev.keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA); - mouse->dev.relbit[0] |= BIT(REL_WHEEL); + if (dev->product) { + if (dev->manufacturer) + strlcat(mouse->name, " ", sizeof(mouse->name)); + strlcat(mouse->name, dev->product, sizeof(mouse->name)); + } - mouse->dev.private = mouse; - mouse->dev.open = usb_mouse_open; - mouse->dev.close = usb_mouse_close; + if (!strlen(mouse->name)) + snprintf(mouse->name, sizeof(mouse->name), + "USB HIDBP Mouse %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); - usb_make_path(dev, path, 64); - sprintf(mouse->phys, "%s/input0", path); + usb_make_path(dev, mouse->phys, sizeof(mouse->phys)); + strlcat(mouse->phys, "/input0", sizeof(mouse->phys)); - mouse->dev.name = mouse->name; - mouse->dev.phys = mouse->phys; - usb_to_input_id(dev, &mouse->dev.id); - mouse->dev.dev = &intf->dev; + input_dev->name = mouse->name; + input_dev->phys = mouse->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; - if (dev->manufacturer) - strcat(mouse->name, dev->manufacturer); - if (dev->product) - sprintf(mouse->name, "%s %s", mouse->name, dev->product); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA); + input_dev->relbit[0] |= BIT(REL_WHEEL); - if (!strlen(mouse->name)) - sprintf(mouse->name, "USB HIDBP Mouse %04x:%04x", - mouse->dev.id.vendor, mouse->dev.id.product); + input_dev->private = mouse; + input_dev->open = usb_mouse_open; + input_dev->close = usb_mouse_close; usb_fill_int_urb(mouse->irq, dev, pipe, mouse->data, (maxp > 8 ? 8 : maxp), @@ -190,11 +193,15 @@ static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_ mouse->irq->transfer_dma = mouse->data_dma; mouse->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&mouse->dev); - printk(KERN_INFO "input: %s on %s\n", mouse->name, path); + input_register_device(mouse->dev); usb_set_intfdata(intf, mouse); return 0; + +fail2: usb_buffer_free(dev, 8, mouse->data, mouse->data_dma); +fail1: input_free_device(input_dev); + kfree(mouse); + return -ENOMEM; } static void usb_mouse_disconnect(struct usb_interface *intf) @@ -204,7 +211,7 @@ static void usb_mouse_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (mouse) { usb_kill_urb(mouse->irq); - input_unregister_device(&mouse->dev); + input_unregister_device(mouse->dev); usb_free_urb(mouse->irq); usb_buffer_free(interface_to_usbdev(intf), 8, mouse->data, mouse->data_dma); kfree(mouse); diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index 3b266af3048a..ea0f75773ae1 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -111,7 +111,7 @@ struct wacom_features { struct wacom { signed char *data; dma_addr_t data_dma; - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; struct urb *irq; struct wacom_features *features; @@ -135,7 +135,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int prox, pressure; int retval; @@ -225,7 +225,7 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int retval; switch (urb->status) { @@ -275,7 +275,7 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int retval; switch (urb->status) { @@ -318,7 +318,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int x, y; int retval; @@ -397,7 +397,7 @@ static int wacom_intuos_inout(struct urb *urb) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int idx; /* tool number */ @@ -479,7 +479,7 @@ static void wacom_intuos_general(struct urb *urb) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; unsigned int t; /* general pen packet */ @@ -509,7 +509,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; unsigned int t; int idx; int retval; @@ -738,95 +738,83 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i { struct usb_device *dev = interface_to_usbdev(intf); struct usb_endpoint_descriptor *endpoint; - char rep_data[2] = {0x02, 0x02}; struct wacom *wacom; - char path[64]; + struct input_dev *input_dev; + char rep_data[2] = {0x02, 0x02}; - if (!(wacom = kmalloc(sizeof(struct wacom), GFP_KERNEL))) - return -ENOMEM; - memset(wacom, 0, sizeof(struct wacom)); + wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!wacom || !input_dev) + goto fail1; wacom->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); - if (!wacom->data) { - kfree(wacom); - return -ENOMEM; - } + if (!wacom->data) + goto fail1; wacom->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!wacom->irq) { - usb_buffer_free(dev, 10, wacom->data, wacom->data_dma); - kfree(wacom); - return -ENOMEM; - } + if (!wacom->irq) + goto fail2; + + wacom->usbdev = dev; + wacom->dev = input_dev; + usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); + strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); wacom->features = wacom_features + (id - wacom_ids); + if (wacom->features->pktlen > 10) + BUG(); + + input_dev->name = wacom->features->name; + usb_to_input_id(dev, &input_dev->id); - wacom->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); - wacom->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); + input_dev->cdev.dev = &intf->dev; + input_dev->private = wacom; + input_dev->open = wacom_open; + input_dev->close = wacom_close; + + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); + input_set_abs_params(input_dev, ABS_X, 0, wacom->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); switch (wacom->features->type) { case GRAPHIRE: - wacom->dev.evbit[0] |= BIT(EV_REL); - wacom->dev.relbit[0] |= BIT(REL_WHEEL); - wacom->dev.absbit[0] |= BIT(ABS_DISTANCE); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); + input_dev->evbit[0] |= BIT(EV_REL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0); break; case INTUOS3: case CINTIQ: - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); - wacom->dev.absbit[0] |= BIT(ABS_RX) | BIT(ABS_RY); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); + input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0); /* fall through */ case INTUOS: - wacom->dev.evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); - wacom->dev.mscbit[0] |= BIT(MSC_SERIAL); - wacom->dev.relbit[0] |= BIT(REL_WHEEL); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) + input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2); - wacom->dev.absbit[0] |= BIT(ABS_DISTANCE) | BIT(ABS_WHEEL) | BIT(ABS_TILT_X) | BIT(ABS_TILT_Y) | BIT(ABS_RZ) | BIT(ABS_THROTTLE); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); break; case PL: - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); break; } - wacom->dev.absmax[ABS_X] = wacom->features->x_max; - wacom->dev.absmax[ABS_Y] = wacom->features->y_max; - wacom->dev.absmax[ABS_PRESSURE] = wacom->features->pressure_max; - wacom->dev.absmax[ABS_DISTANCE] = wacom->features->distance_max; - wacom->dev.absmax[ABS_TILT_X] = 127; - wacom->dev.absmax[ABS_TILT_Y] = 127; - wacom->dev.absmax[ABS_WHEEL] = 1023; - - wacom->dev.absmax[ABS_RX] = 4097; - wacom->dev.absmax[ABS_RY] = 4097; - wacom->dev.absmin[ABS_RZ] = -900; - wacom->dev.absmax[ABS_RZ] = 899; - wacom->dev.absmin[ABS_THROTTLE] = -1023; - wacom->dev.absmax[ABS_THROTTLE] = 1023; - - wacom->dev.absfuzz[ABS_X] = 4; - wacom->dev.absfuzz[ABS_Y] = 4; - - wacom->dev.private = wacom; - wacom->dev.open = wacom_open; - wacom->dev.close = wacom_close; - - usb_make_path(dev, path, 64); - sprintf(wacom->phys, "%s/input0", path); - - wacom->dev.name = wacom->features->name; - wacom->dev.phys = wacom->phys; - usb_to_input_id(dev, &wacom->dev.id); - wacom->dev.dev = &intf->dev; - wacom->usbdev = dev; - endpoint = &intf->cur_altsetting->endpoint[0].desc; if (wacom->features->pktlen > 10) @@ -839,18 +827,20 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i wacom->irq->transfer_dma = wacom->data_dma; wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&wacom->dev); + input_register_device(wacom->dev); /* ask the tablet to report tablet data */ usb_set_report(intf, 3, 2, rep_data, 2); /* repeat once (not sure why the first call often fails) */ usb_set_report(intf, 3, 2, rep_data, 2); - printk(KERN_INFO "input: %s on %s\n", wacom->features->name, path); - usb_set_intfdata(intf, wacom); - return 0; + +fail2: usb_buffer_free(dev, 10, wacom->data, wacom->data_dma); +fail1: input_free_device(input_dev); + kfree(wacom); + return -ENOMEM; } static void wacom_disconnect(struct usb_interface *intf) @@ -860,7 +850,7 @@ static void wacom_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (wacom) { usb_kill_urb(wacom->irq); - input_unregister_device(&wacom->dev); + input_unregister_device(wacom->dev); usb_free_urb(wacom->irq); usb_buffer_free(interface_to_usbdev(intf), 10, wacom->data, wacom->data_dma); kfree(wacom); diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index 18125e0bffa2..43112f040b6d 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -103,7 +103,7 @@ static struct usb_device_id xpad_table [] = { MODULE_DEVICE_TABLE (usb, xpad_table); struct usb_xpad { - struct input_dev dev; /* input device interface */ + struct input_dev *dev; /* input device interface */ struct usb_device *udev; /* usb device */ struct urb *irq_in; /* urb for interrupt in report */ @@ -125,7 +125,7 @@ struct usb_xpad { static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data, struct pt_regs *regs) { - struct input_dev *dev = &xpad->dev; + struct input_dev *dev = xpad->dev; input_regs(dev, regs); @@ -214,9 +214,9 @@ static void xpad_close (struct input_dev *dev) static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev (intf); - struct usb_xpad *xpad = NULL; + struct usb_xpad *xpad; + struct input_dev *input_dev; struct usb_endpoint_descriptor *ep_irq_in; - char path[64]; int i; for (i = 0; xpad_device[i].idVendor; i++) { @@ -225,89 +225,80 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id break; } - if ((xpad = kmalloc (sizeof(struct usb_xpad), GFP_KERNEL)) == NULL) { - err("cannot allocate memory for new pad"); - return -ENOMEM; - } - memset(xpad, 0, sizeof(struct usb_xpad)); + xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!xpad || !input_dev) + goto fail1; xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN, SLAB_ATOMIC, &xpad->idata_dma); - if (!xpad->idata) { - kfree(xpad); - return -ENOMEM; - } + if (!xpad->idata) + goto fail1; xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL); - if (!xpad->irq_in) { - err("cannot allocate memory for new pad irq urb"); - usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); - kfree(xpad); - return -ENOMEM; - } - - ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; - - usb_fill_int_urb(xpad->irq_in, udev, - usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), - xpad->idata, XPAD_PKT_LEN, xpad_irq_in, - xpad, ep_irq_in->bInterval); - xpad->irq_in->transfer_dma = xpad->idata_dma; - xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (!xpad->irq_in) + goto fail2; xpad->udev = udev; + xpad->dev = input_dev; + usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); + strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); - usb_to_input_id(udev, &xpad->dev.id); - xpad->dev.dev = &intf->dev; - xpad->dev.private = xpad; - xpad->dev.name = xpad_device[i].name; - xpad->dev.phys = xpad->phys; - xpad->dev.open = xpad_open; - xpad->dev.close = xpad_close; - - usb_make_path(udev, path, 64); - snprintf(xpad->phys, 64, "%s/input0", path); + input_dev->name = xpad_device[i].name; + input_dev->phys = xpad->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = xpad; + input_dev->open = xpad_open; + input_dev->close = xpad_close; - xpad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; xpad_btn[i] >= 0; i++) - set_bit(xpad_btn[i], xpad->dev.keybit); + set_bit(xpad_btn[i], input_dev->keybit); for (i = 0; xpad_abs[i] >= 0; i++) { signed short t = xpad_abs[i]; - set_bit(t, xpad->dev.absbit); + set_bit(t, input_dev->absbit); switch (t) { case ABS_X: case ABS_Y: case ABS_RX: case ABS_RY: /* the two sticks */ - xpad->dev.absmax[t] = 32767; - xpad->dev.absmin[t] = -32768; - xpad->dev.absflat[t] = 128; - xpad->dev.absfuzz[t] = 16; + input_set_abs_params(input_dev, t, -32768, 32767, 16, 128); break; case ABS_Z: case ABS_RZ: /* the triggers */ - xpad->dev.absmax[t] = 255; - xpad->dev.absmin[t] = 0; + input_set_abs_params(input_dev, t, 0, 255, 0, 0); break; case ABS_HAT0X: case ABS_HAT0Y: /* the d-pad */ - xpad->dev.absmax[t] = 1; - xpad->dev.absmin[t] = -1; + input_set_abs_params(input_dev, t, -1, 1, 0, 0); break; } } - input_register_device(&xpad->dev); + ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(xpad->irq_in, udev, + usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), + xpad->idata, XPAD_PKT_LEN, xpad_irq_in, + xpad, ep_irq_in->bInterval); + xpad->irq_in->transfer_dma = xpad->idata_dma; + xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - printk(KERN_INFO "input: %s on %s", xpad->dev.name, path); + input_register_device(xpad->dev); usb_set_intfdata(intf, xpad); return 0; + +fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); +fail1: input_free_device(input_dev); + kfree(xpad); + return -ENOMEM; + } static void xpad_disconnect(struct usb_interface *intf) @@ -317,7 +308,7 @@ static void xpad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (xpad) { usb_kill_urb(xpad->irq_in); - input_unregister_device(&xpad->dev); + input_unregister_device(xpad->dev); usb_free_urb(xpad->irq_in); usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); kfree(xpad); diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index 58a176ef96a5..f526aebea502 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -54,6 +54,7 @@ #include <linux/module.h> #include <linux/rwsem.h> #include <linux/usb.h> +#include <linux/usb_input.h> #include "map_to_7segment.h" #include "yealink.h" @@ -101,12 +102,12 @@ static const struct lcd_segment_map { }; struct yealink_dev { - struct input_dev idev; /* input device */ + struct input_dev *idev; /* input device */ struct usb_device *udev; /* usb device */ /* irq input channel */ struct yld_ctl_packet *irq_data; - dma_addr_t irq_dma; + dma_addr_t irq_dma; struct urb *urb_irq; /* control output channel */ @@ -237,7 +238,7 @@ static int map_p1k_to_key(int scancode) */ static void report_key(struct yealink_dev *yld, int key, struct pt_regs *regs) { - struct input_dev *idev = &yld->idev; + struct input_dev *idev = yld->idev; input_regs(idev, regs); if (yld->key_code >= 0) { @@ -809,8 +810,12 @@ static int usb_cleanup(struct yealink_dev *yld, int err) } if (yld->urb_ctl) usb_free_urb(yld->urb_ctl); - if (yld->idev.dev) - input_unregister_device(&yld->idev); + if (yld->idev) { + if (err) + input_free_device(yld->idev); + else + input_unregister_device(yld->idev); + } if (yld->ctl_req) usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), yld->ctl_req, yld->ctl_req_dma); @@ -857,7 +862,7 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct yealink_dev *yld; - char path[64]; + struct input_dev *input_dev; int ret, pipe, i; i = usb_match(udev); @@ -866,17 +871,21 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -EIO; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -EIO; - if ((yld = kmalloc(sizeof(struct yealink_dev), GFP_KERNEL)) == NULL) + yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL); + if (!yld) return -ENOMEM; - memset(yld, 0, sizeof(*yld)); yld->udev = udev; + yld->idev = input_dev = input_allocate_device(); + if (!input_dev) + return usb_cleanup(yld, -ENOMEM); + /* allocate usb buffers */ yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN, SLAB_ATOMIC, &yld->irq_dma); @@ -935,42 +944,37 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) yld->urb_ctl->dev = udev; /* find out the physical bus location */ - if (usb_make_path(udev, path, sizeof(path)) > 0) - snprintf(yld->phys, sizeof(yld->phys)-1, "%s/input0", path); + usb_make_path(udev, yld->phys, sizeof(yld->phys)); + strlcat(yld->phys, "/input0", sizeof(yld->phys)); /* register settings for the input device */ - init_input_dev(&yld->idev); - yld->idev.private = yld; - yld->idev.id.bustype = BUS_USB; - yld->idev.id.vendor = le16_to_cpu(udev->descriptor.idVendor); - yld->idev.id.product = le16_to_cpu(udev->descriptor.idProduct); - yld->idev.id.version = le16_to_cpu(udev->descriptor.bcdDevice); - yld->idev.dev = &intf->dev; - yld->idev.name = yld_device[i].name; - yld->idev.phys = yld->phys; - /* yld->idev.event = input_ev; TODO */ - yld->idev.open = input_open; - yld->idev.close = input_close; + input_dev->name = yld_device[i].name; + input_dev->phys = yld->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + + input_dev->private = yld; + input_dev->open = input_open; + input_dev->close = input_close; + /* input_dev->event = input_ev; TODO */ /* register available key events */ - yld->idev.evbit[0] = BIT(EV_KEY); + input_dev->evbit[0] = BIT(EV_KEY); for (i = 0; i < 256; i++) { int k = map_p1k_to_key(i); if (k >= 0) { - set_bit(k & 0xff, yld->idev.keybit); + set_bit(k & 0xff, input_dev->keybit); if (k >> 8) - set_bit(k >> 8, yld->idev.keybit); + set_bit(k >> 8, input_dev->keybit); } } - printk(KERN_INFO "input: %s on %s\n", yld->idev.name, path); - - input_register_device(&yld->idev); + input_register_device(yld->idev); usb_set_intfdata(intf, yld); /* clear visible elements */ - for (i=0; i<ARRAY_SIZE(lcdMap); i++) + for (i = 0; i < ARRAY_SIZE(lcdMap); i++) setChar(yld, i, ' '); /* display driver version on LCD line 3 */ diff --git a/drivers/usb/media/konicawc.c b/drivers/usb/media/konicawc.c index 20ac9e1069d4..9fe2c2710d13 100644 --- a/drivers/usb/media/konicawc.c +++ b/drivers/usb/media/konicawc.c @@ -119,7 +119,7 @@ struct konicawc { int yplanesz; /* Number of bytes in the Y plane */ unsigned int buttonsts:1; #ifdef CONFIG_INPUT - struct input_dev input; + struct input_dev *input; char input_physname[64]; #endif }; @@ -218,6 +218,57 @@ static void konicawc_adjust_picture(struct uvd *uvd) konicawc_camera_on(uvd); } +#ifdef CONFIG_INPUT + +static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) +{ + struct input_dev *input_dev; + + usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); + strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); + + cam->input = input_dev = input_allocate_device(); + if (!input_dev) { + warn("Not enough memory for camera's input device\n"); + return; + } + + input_dev->name = "Konicawc snapshot button"; + input_dev->phys = cam->input_physname; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &dev->dev; + + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + + input_dev->private = cam; + + input_register_device(cam->input); +} + +static void konicawc_unregister_input(struct konicawc *cam) +{ + if (cam->input) { + input_unregister_device(cam->input); + cam->input = NULL; + } +} + +static void konicawc_report_buttonstat(struct konicawc *cam) +{ + if (cam->input) { + input_report_key(cam->input, BTN_0, cam->buttonsts); + input_sync(cam->input); + } +} + +#else + +static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { } +static inline void konicawc_unregister_input(struct konicawc *cam) { } +static inline void konicawc_report_buttonstat(struct konicawc *cam) { } + +#endif /* CONFIG_INPUT */ static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb) { @@ -273,10 +324,7 @@ static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct ur if(button != cam->buttonsts) { DEBUG(2, "button: %sclicked", button ? "" : "un"); cam->buttonsts = button; -#ifdef CONFIG_INPUT - input_report_key(&cam->input, BTN_0, cam->buttonsts); - input_sync(&cam->input); -#endif + konicawc_report_buttonstat(cam); } if(sts == 0x01) { /* drop frame */ @@ -645,9 +693,9 @@ static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw) RingQueue_Flush(&uvd->dp); cam->lastframe = -2; if(uvd->curframe != -1) { - uvd->frame[uvd->curframe].curline = 0; - uvd->frame[uvd->curframe].seqRead_Length = 0; - uvd->frame[uvd->curframe].seqRead_Index = 0; + uvd->frame[uvd->curframe].curline = 0; + uvd->frame[uvd->curframe].seqRead_Length = 0; + uvd->frame[uvd->curframe].seqRead_Index = 0; } konicawc_start_data(uvd); @@ -718,7 +766,6 @@ static void konicawc_configure_video(struct uvd *uvd) DEBUG(1, "setting initial values"); } - static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid) { struct usb_device *dev = interface_to_usbdev(intf); @@ -839,21 +886,8 @@ static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id err("usbvideo_RegisterVideoDevice() failed."); uvd = NULL; } -#ifdef CONFIG_INPUT - /* Register input device for button */ - memset(&cam->input, 0, sizeof(struct input_dev)); - cam->input.name = "Konicawc snapshot button"; - cam->input.private = cam; - cam->input.evbit[0] = BIT(EV_KEY); - cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0); - usb_to_input_id(dev, &cam->input.id); - input_register_device(&cam->input); - - usb_make_path(dev, cam->input_physname, 56); - strcat(cam->input_physname, "/input0"); - cam->input.phys = cam->input_physname; - info("konicawc: %s on %s\n", cam->input.name, cam->input.phys); -#endif + + konicawc_register_input(cam, dev); } if (uvd) { @@ -869,10 +903,9 @@ static void konicawc_free_uvd(struct uvd *uvd) int i; struct konicawc *cam = (struct konicawc *)uvd->user_data; -#ifdef CONFIG_INPUT - input_unregister_device(&cam->input); -#endif - for (i=0; i < USBVIDEO_NUMSBUF; i++) { + konicawc_unregister_input(cam); + + for (i = 0; i < USBVIDEO_NUMSBUF; i++) { usb_free_urb(cam->sts_urb[i]); cam->sts_urb[i] = NULL; } diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 2c9402dc702b..89401a59f952 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -5,7 +5,7 @@ * Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu> * * Initial work by: - * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se> + * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se> * * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann) * @@ -46,7 +46,7 @@ void onetouch_release_input(void *onetouch_); struct usb_onetouch { char name[128]; char phys[64]; - struct input_dev dev; /* input device interface */ + struct input_dev *dev; /* input device interface */ struct usb_device *udev; /* usb device */ struct urb *irq; /* urb for interrupt in report */ @@ -58,7 +58,7 @@ static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs) { struct usb_onetouch *onetouch = urb->context; signed char *data = onetouch->data; - struct input_dev *dev = &onetouch->dev; + struct input_dev *dev = onetouch->dev; int status; switch (urb->status) { @@ -74,11 +74,9 @@ static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs) } input_regs(dev, regs); - - input_report_key(&onetouch->dev, ONETOUCH_BUTTON, - data[0] & 0x02); - + input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02); input_sync(dev); + resubmit: status = usb_submit_urb (urb, SLAB_ATOMIC); if (status) @@ -113,8 +111,8 @@ int onetouch_connect_input(struct us_data *ss) struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_onetouch *onetouch; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; interface = ss->pusb_intf->cur_altsetting; @@ -122,62 +120,62 @@ int onetouch_connect_input(struct us_data *ss) return -ENODEV; endpoint = &interface->endpoint[2].desc; - if(!(endpoint->bEndpointAddress & USB_DIR_IN)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - if (!(onetouch = kcalloc(1, sizeof(struct usb_onetouch), GFP_KERNEL))) - return -ENOMEM; + onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!onetouch || !input_dev) + goto fail1; onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN, SLAB_ATOMIC, &onetouch->data_dma); - if (!onetouch->data){ - kfree(onetouch); - return -ENOMEM; - } + if (!onetouch->data) + goto fail1; onetouch->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!onetouch->irq){ - kfree(onetouch); - usb_buffer_free(udev, ONETOUCH_PKT_LEN, - onetouch->data, onetouch->data_dma); - return -ENODEV; - } - + if (!onetouch->irq) + goto fail2; onetouch->udev = udev; + onetouch->dev = input_dev; - set_bit(EV_KEY, onetouch->dev.evbit); - set_bit(ONETOUCH_BUTTON, onetouch->dev.keybit); - clear_bit(0, onetouch->dev.keybit); + if (udev->manufacturer) + strlcpy(onetouch->name, udev->manufacturer, + sizeof(onetouch->name)); + if (udev->product) { + if (udev->manufacturer) + strlcat(onetouch->name, " ", sizeof(onetouch->name)); + strlcat(onetouch->name, udev->product, sizeof(onetouch->name)); + } - onetouch->dev.private = onetouch; - onetouch->dev.open = usb_onetouch_open; - onetouch->dev.close = usb_onetouch_close; + if (!strlen(onetouch->name)) + snprintf(onetouch->name, sizeof(onetouch->name), + "Maxtor Onetouch %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); - usb_make_path(udev, path, sizeof(path)); - sprintf(onetouch->phys, "%s/input0", path); + usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys)); + strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys)); - onetouch->dev.name = onetouch->name; - onetouch->dev.phys = onetouch->phys; + input_dev->name = onetouch->name; + input_dev->phys = onetouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &udev->dev; - usb_to_input_id(udev, &onetouch->dev.id); + set_bit(EV_KEY, input_dev->evbit); + set_bit(ONETOUCH_BUTTON, input_dev->keybit); + clear_bit(0, input_dev->keybit); - onetouch->dev.dev = &udev->dev; - - if (udev->manufacturer) - strcat(onetouch->name, udev->manufacturer); - if (udev->product) - sprintf(onetouch->name, "%s %s", onetouch->name, - udev->product); - if (!strlen(onetouch->name)) - sprintf(onetouch->name, "Maxtor Onetouch %04x:%04x", - onetouch->dev.id.vendor, onetouch->dev.id.product); + input_dev->private = onetouch; + input_dev->open = usb_onetouch_open; + input_dev->close = usb_onetouch_close; usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, (maxp > 8 ? 8 : maxp), @@ -188,10 +186,15 @@ int onetouch_connect_input(struct us_data *ss) ss->extra_destructor = onetouch_release_input; ss->extra = onetouch; - input_register_device(&onetouch->dev); - printk(KERN_INFO "usb-input: %s on %s\n", onetouch->dev.name, path); + input_register_device(onetouch->dev); return 0; + + fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN, + onetouch->data, onetouch->data_dma); + fail1: kfree(onetouch); + input_free_device(input_dev); + return -ENOMEM; } void onetouch_release_input(void *onetouch_) @@ -200,11 +203,9 @@ void onetouch_release_input(void *onetouch_) if (onetouch) { usb_kill_urb(onetouch->irq); - input_unregister_device(&onetouch->dev); + input_unregister_device(onetouch->dev); usb_free_urb(onetouch->irq); usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN, onetouch->data, onetouch->data_dma); - printk(KERN_INFO "usb-input: deregistering %s\n", - onetouch->dev.name); } } |