diff options
Diffstat (limited to 'drivers')
611 files changed, 27232 insertions, 6442 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 6f0459cb745b..d236aef7e59f 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -50,6 +50,8 @@ source "drivers/i2c/Kconfig" source "drivers/spi/Kconfig" +source "drivers/hsi/Kconfig" + source "drivers/pps/Kconfig" source "drivers/ptp/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 262b19d6b627..95952c82bf16 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_TARGET_CORE) += target/ obj-$(CONFIG_MTD) += mtd/ obj-$(CONFIG_SPI) += spi/ +obj-y += hsi/ obj-y += net/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 7556913aba45..47768ff87343 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -384,6 +384,15 @@ config ACPI_CUSTOM_METHOD load additional kernel modules after boot, this feature may be used to override that restriction). +config ACPI_BGRT + tristate "Boottime Graphics Resource Table support" + default n + help + This driver adds support for exposing the ACPI Boottime Graphics + Resource Table, which allows the operating system to obtain + data from the firmware boot splash. It will appear under + /sys/firmware/acpi/bgrt/ . + source "drivers/acpi/apei/Kconfig" endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 1567028d2038..47199e2a9130 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_HED) += hed.o obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o +obj-$(CONFIG_ACPI_BGRT) += bgrt.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o processor_throttling.o diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 0ca208b6dcf0..793b8cc8e256 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -68,12 +68,14 @@ acpi-y += \ acpi-y += \ hwacpi.o \ + hwesleep.o \ hwgpe.o \ hwpci.o \ hwregs.o \ hwsleep.o \ hwvalid.o \ - hwxface.o + hwxface.o \ + hwxfsleep.o acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h index a44bd424f9f4..8a7d51bfb3b3 100644 --- a/drivers/acpi/acpica/accommon.h +++ b/drivers/acpi/acpica/accommon.h @@ -51,7 +51,6 @@ * * Note: The order of these include files is important. */ -#include "acconfig.h" /* Global configuration constants */ #include "acmacros.h" /* C macros */ #include "aclocal.h" /* Internal data types */ #include "acobject.h" /* ACPI internal object */ diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h deleted file mode 100644 index 1f30af613e87..000000000000 --- a/drivers/acpi/acpica/acconfig.h +++ /dev/null @@ -1,231 +0,0 @@ -/****************************************************************************** - * - * Name: acconfig.h - Global configuration constants - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2012, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ACCONFIG_H -#define _ACCONFIG_H - -/****************************************************************************** - * - * Configuration options - * - *****************************************************************************/ - -/* - * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the - * ACPI subsystem. This includes the DEBUG_PRINT output - * statements. When disabled, all DEBUG_PRINT - * statements are compiled out. - * - * ACPI_APPLICATION - Use this switch if the subsystem is going to be run - * at the application level. - * - */ - -/* - * OS name, used for the _OS object. The _OS object is essentially obsolete, - * but there is a large base of ASL/AML code in existing machines that check - * for the string below. The use of this string usually guarantees that - * the ASL will execute down the most tested code path. Also, there is some - * code that will not execute the _OSI method unless _OS matches the string - * below. Therefore, change this string at your own risk. - */ -#define ACPI_OS_NAME "Microsoft Windows NT" - -/* Maximum objects in the various object caches */ - -#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */ -#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */ -#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */ - -/* - * Should the subsystem abort the loading of an ACPI table if the - * table checksum is incorrect? - */ -#define ACPI_CHECKSUM_ABORT FALSE - -/****************************************************************************** - * - * Subsystem Constants - * - *****************************************************************************/ - -/* Version of ACPI supported */ - -#define ACPI_CA_SUPPORT_LEVEL 3 - -/* Maximum count for a semaphore object */ - -#define ACPI_MAX_SEMAPHORE_COUNT 256 - -/* Maximum object reference count (detects object deletion issues) */ - -#define ACPI_MAX_REFERENCE_COUNT 0x1000 - -/* Default page size for use in mapping memory for operation regions */ - -#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ - -/* owner_id tracking. 8 entries allows for 255 owner_ids */ - -#define ACPI_NUM_OWNERID_MASKS 8 - -/* Size of the root table array is increased by this increment */ - -#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 - -/* Maximum number of While() loop iterations before forced abort */ - -#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF - -/* Maximum sleep allowed via Sleep() operator */ - -#define ACPI_MAX_SLEEP 2000 /* Two seconds */ - -/* Address Range lists are per-space_id (Memory and I/O only) */ - -#define ACPI_ADDRESS_RANGE_MAX 2 - -/****************************************************************************** - * - * ACPI Specification constants (Do not change unless the specification changes) - * - *****************************************************************************/ - -/* Number of distinct GPE register blocks and register width */ - -#define ACPI_MAX_GPE_BLOCKS 2 -#define ACPI_GPE_REGISTER_WIDTH 8 - -/* Method info (in WALK_STATE), containing local variables and argumetns */ - -#define ACPI_METHOD_NUM_LOCALS 8 -#define ACPI_METHOD_MAX_LOCAL 7 - -#define ACPI_METHOD_NUM_ARGS 7 -#define ACPI_METHOD_MAX_ARG 6 - -/* Length of _HID, _UID, _CID, and UUID values */ - -#define ACPI_DEVICE_ID_LENGTH 0x09 -#define ACPI_MAX_CID_LENGTH 48 -#define ACPI_UUID_LENGTH 16 - -/* - * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG - */ -#define ACPI_OBJ_NUM_OPERANDS 8 -#define ACPI_OBJ_MAX_OPERAND 7 - -/* Number of elements in the Result Stack frame, can be an arbitrary value */ - -#define ACPI_RESULTS_FRAME_OBJ_NUM 8 - -/* - * Maximal number of elements the Result Stack can contain, - * it may be an arbitray value not exceeding the types of - * result_size and result_count (now u8). - */ -#define ACPI_RESULTS_OBJ_NUM_MAX 255 - -/* Names within the namespace are 4 bytes long */ - -#define ACPI_NAME_SIZE 4 -#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ -#define ACPI_PATH_SEPARATOR '.' - -/* Sizes for ACPI table headers */ - -#define ACPI_OEM_ID_SIZE 6 -#define ACPI_OEM_TABLE_ID_SIZE 8 - -/* Constants used in searching for the RSDP in low memory */ - -#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ -#define ACPI_EBDA_PTR_LENGTH 2 -#define ACPI_EBDA_WINDOW_SIZE 1024 -#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */ -#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000 -#define ACPI_RSDP_SCAN_STEP 16 - -/* Operation regions */ - -#define ACPI_USER_REGION_BEGIN 0x80 - -/* Maximum space_ids for Operation Regions */ - -#define ACPI_MAX_ADDRESS_SPACE 255 - -/* Array sizes. Used for range checking also */ - -#define ACPI_MAX_MATCH_OPCODE 5 - -/* RSDP checksums */ - -#define ACPI_RSDP_CHECKSUM_LENGTH 20 -#define ACPI_RSDP_XCHECKSUM_LENGTH 36 - -/* SMBus, GSBus and IPMI bidirectional buffer size */ - -#define ACPI_SMBUS_BUFFER_SIZE 34 -#define ACPI_GSBUS_BUFFER_SIZE 34 -#define ACPI_IPMI_BUFFER_SIZE 66 - -/* _sx_d and _sx_w control methods */ - -#define ACPI_NUM_sx_d_METHODS 4 -#define ACPI_NUM_sx_w_METHODS 5 - -/****************************************************************************** - * - * ACPI AML Debugger - * - *****************************************************************************/ - -#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */ - -#define ACPI_DEBUGGER_COMMAND_PROMPT '-' -#define ACPI_DEBUGGER_EXECUTE_PROMPT '%' - -#endif /* _ACCONFIG_H */ diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h index deaa81979561..5e8abb07724f 100644 --- a/drivers/acpi/acpica/acdebug.h +++ b/drivers/acpi/acpica/acdebug.h @@ -111,7 +111,7 @@ acpi_status acpi_db_find_name_in_namespace(char *name_arg); void acpi_db_set_scope(char *name); -acpi_status acpi_db_sleep(char *object_arg); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg)) void acpi_db_find_references(char *object_arg); @@ -119,11 +119,13 @@ void acpi_db_display_locks(void); void acpi_db_display_resources(char *object_arg); -void acpi_db_display_gpes(void); +ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void)) void acpi_db_check_integrity(void); -void acpi_db_generate_gpe(char *gpe_arg, char *block_arg); +ACPI_HW_DEPENDENT_RETURN_VOID(void + acpi_db_generate_gpe(char *gpe_arg, + char *block_arg)) void acpi_db_check_predefined_names(void); diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index c53caa521a30..d700f63e4701 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -69,11 +69,10 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node, */ acpi_status acpi_ev_init_global_lock_handler(void); -acpi_status acpi_ev_acquire_global_lock(u16 timeout); - -acpi_status acpi_ev_release_global_lock(void); - -acpi_status acpi_ev_remove_global_lock_handler(void); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status + acpi_ev_acquire_global_lock(u16 timeout)) + ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_ev_release_global_lock(void)) + acpi_status acpi_ev_remove_global_lock_handler(void); /* * evgpe - Low-level GPE support @@ -114,7 +113,9 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block, void *context); -acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status + acpi_ev_delete_gpe_block(struct acpi_gpe_block_info + *gpe_block)) u32 acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, @@ -126,9 +127,10 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, */ acpi_status acpi_ev_gpe_initialize(void); -void acpi_ev_update_gpes(acpi_owner_id table_owner_id); +ACPI_HW_DEPENDENT_RETURN_VOID(void + acpi_ev_update_gpes(acpi_owner_id table_owner_id)) -acpi_status + acpi_status acpi_ev_match_gpe_method(acpi_handle obj_handle, u32 level, void *context, void **return_value); @@ -237,6 +239,5 @@ acpi_status acpi_ev_remove_sci_handler(void); u32 acpi_ev_initialize_sCI(u32 program_sCI); -void acpi_ev_terminate(void); - +ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void)) #endif /* __ACEVENTS_H__ */ diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 2853f7673f3b..4f7d3f57d05c 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -147,7 +147,7 @@ u8 acpi_gbl_system_awake_and_running; */ u8 acpi_gbl_reduced_hardware; -#endif +#endif /* DEFINE_ACPI_GLOBALS */ /* Do not disassemble buffers to resource descriptors */ @@ -184,8 +184,12 @@ ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer; * found in the RSDT/XSDT. */ ACPI_EXTERN struct acpi_table_list acpi_gbl_root_table_list; + +#if (!ACPI_REDUCED_HARDWARE) ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS; +#endif /* !ACPI_REDUCED_HARDWARE */ + /* These addresses are calculated from the FADT Event Block addresses */ ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status; @@ -397,10 +401,15 @@ ACPI_EXTERN struct acpi_fixed_event_handler ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head; ACPI_EXTERN struct acpi_gpe_block_info *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS]; + +#if (!ACPI_REDUCED_HARDWARE) + ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized; ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler; ACPI_EXTERN void *acpi_gbl_global_event_handler_context; +#endif /* !ACPI_REDUCED_HARDWARE */ + /***************************************************************************** * * Debugger globals diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 677793e938f5..5ccb99ae3a6f 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -81,6 +81,26 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value); acpi_status acpi_hw_clear_acpi_status(void); /* + * hwsleep - sleep/wake support (Legacy sleep registers) + */ +acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags); + +/* + * hwesleep - sleep/wake support (Extended FADT-V5 sleep registers) + */ +void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument); + +acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags); + +/* * hwvalid - Port I/O with validation */ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width); @@ -128,16 +148,4 @@ acpi_status acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id, acpi_handle root_pci_device, acpi_handle pci_region); -#ifdef ACPI_FUTURE_USAGE -/* - * hwtimer - ACPI Timer prototypes - */ -acpi_status acpi_get_timer_resolution(u32 * resolution); - -acpi_status acpi_get_timer(u32 * ticks); - -acpi_status -acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed); -#endif /* ACPI_FUTURE_USAGE */ - #endif /* __ACHWARE_H__ */ diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 3f24068837d5..e3922ca20e7f 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -370,6 +370,7 @@ struct acpi_predefined_data { /* Defines for Flags field above */ #define ACPI_OBJECT_REPAIRED 1 +#define ACPI_OBJECT_WRAPPED 2 /* * Bitmapped return value types diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index ef338a96f5b2..f119f473f71a 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -516,6 +516,12 @@ #endif /* ACPI_DEBUG_OUTPUT */ +#if (!ACPI_REDUCED_HARDWARE) +#define ACPI_HW_OPTIONAL_FUNCTION(addr) addr +#else +#define ACPI_HW_OPTIONAL_FUNCTION(addr) NULL +#endif + /* * Some code only gets executed when the debugger is built in. * Note that this is entirely independent of whether the diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index 2c9e0f049523..9b19d4b86424 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -283,8 +283,9 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, union acpi_operand_object **return_object_ptr); acpi_status -acpi_ns_repair_package_list(struct acpi_predefined_data *data, - union acpi_operand_object **obj_desc_ptr); +acpi_ns_wrap_with_package(struct acpi_predefined_data *data, + union acpi_operand_object *original_object, + union acpi_operand_object **obj_desc_ptr); acpi_status acpi_ns_repair_null_element(struct acpi_predefined_data *data, diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h index d5bec304c823..6712965ba8ae 100644 --- a/drivers/acpi/acpica/actables.h +++ b/drivers/acpi/acpica/actables.h @@ -67,6 +67,11 @@ acpi_status acpi_tb_resize_root_table_list(void); acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc); +struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header + *table_header, + struct acpi_table_desc + *table_desc); + acpi_status acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index); diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index 6729ebe2f1e6..07e4dc44f81c 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -47,7 +47,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evevent") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_ev_fixed_event_initialize(void); @@ -291,3 +291,5 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event) return ((acpi_gbl_fixed_event_handlers[event]. handler) (acpi_gbl_fixed_event_handlers[event].context)); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c index 5e5683cb1f0d..cfeab38795d8 100644 --- a/drivers/acpi/acpica/evglock.c +++ b/drivers/acpi/acpica/evglock.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evglock") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static u32 acpi_ev_global_lock_handler(void *context); @@ -339,3 +339,5 @@ acpi_status acpi_ev_release_global_lock(void) acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex); return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 9e88cb6fb25e..8ba0e5f17091 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpe") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context); @@ -766,3 +766,5 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, return_UINT32(ACPI_INTERRUPT_HANDLED); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index be75339cd5dd..23a3ca86b2eb 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeblk") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block, @@ -504,3 +504,5 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index adf7494da9db..da0add858f81 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeinit") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* * Note: History of _PRW support in ACPICA * @@ -440,3 +440,5 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, name, gpe_number)); return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c index 25073932aa10..3c43796b8361 100644 --- a/drivers/acpi/acpica/evgpeutil.c +++ b/drivers/acpi/acpica/evgpeutil.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeutil") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_ev_walk_gpe_list @@ -374,3 +375,5 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 84966f416463..51ef9f5e002d 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -108,27 +108,30 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, ACPI_FUNCTION_NAME(ev_queue_notify_request); /* - * For value 3 (Ejection Request), some device method may need to be run. - * For value 2 (Device Wake) if _PRW exists, the _PS0 method may need - * to be run. + * For value 0x03 (Ejection Request), may need to run a device method. + * For value 0x02 (Device Wake), if _PRW exists, may need to run + * the _PS0 method. * For value 0x80 (Status Change) on the power button or sleep button, - * initiate soft-off or sleep operation? + * initiate soft-off or sleep operation. + * + * For all cases, simply dispatch the notify to the handler. */ ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Dispatching Notify on [%4.4s] Node %p Value 0x%2.2X (%s)\n", - acpi_ut_get_node_name(node), node, notify_value, - acpi_ut_get_notify_name(notify_value))); + "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n", + acpi_ut_get_node_name(node), + acpi_ut_get_type_name(node->type), notify_value, + acpi_ut_get_notify_name(notify_value), node)); /* Get the notify object attached to the NS Node */ obj_desc = acpi_ns_get_attached_object(node); if (obj_desc) { - /* We have the notify object, Get the right handler */ + /* We have the notify object, Get the correct handler */ switch (node->type) { - /* Notify allowed only on these types */ + /* Notify is allowed only on these types */ case ACPI_TYPE_DEVICE: case ACPI_TYPE_THERMAL: @@ -152,7 +155,7 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, } /* - * If there is any handler to run, schedule the dispatcher. + * If there is a handler to run, schedule the dispatcher. * Check for: * 1) Global system notify handler * 2) Global device notify handler @@ -270,6 +273,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) acpi_ut_delete_generic_state(notify_info); } +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * * FUNCTION: acpi_ev_terminate @@ -338,3 +342,5 @@ void acpi_ev_terminate(void) } return_VOID; } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c index 26065c612e76..6a57aa2d70d1 100644 --- a/drivers/acpi/acpica/evsci.c +++ b/drivers/acpi/acpica/evsci.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evsci") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context); @@ -181,3 +181,5 @@ acpi_status acpi_ev_remove_sci_handler(void) return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 61944e89565a..44bef5744ebb 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -51,222 +51,6 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxface") -/******************************************************************************* - * - * FUNCTION: acpi_install_exception_handler - * - * PARAMETERS: Handler - Pointer to the handler function for the - * event - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function - * - ******************************************************************************/ -#ifdef ACPI_FUTURE_USAGE -acpi_status acpi_install_exception_handler(acpi_exception_handler handler) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_exception_handler); - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (acpi_gbl_exception_handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - /* Install the handler */ - - acpi_gbl_exception_handler = handler; - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) -#endif /* ACPI_FUTURE_USAGE */ - -/******************************************************************************* - * - * FUNCTION: acpi_install_global_event_handler - * - * PARAMETERS: Handler - Pointer to the global event handler function - * Context - Value passed to the handler on each event - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function. The global handler - * is invoked upon each incoming GPE and Fixed Event. It is - * invoked at interrupt level at the time of the event dispatch. - * Can be used to update event counters, etc. - * - ******************************************************************************/ -acpi_status -acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); - - /* Parameter validation */ - - if (!handler) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (acpi_gbl_global_event_handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - acpi_gbl_global_event_handler = handler; - acpi_gbl_global_event_handler_context = context; - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) - -/******************************************************************************* - * - * FUNCTION: acpi_install_fixed_event_handler - * - * PARAMETERS: Event - Event type to enable. - * Handler - Pointer to the handler function for the - * event - * Context - Value passed to the handler on each GPE - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function and then enables the - * event. - * - ******************************************************************************/ -acpi_status -acpi_install_fixed_event_handler(u32 event, - acpi_event_handler handler, void *context) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); - - /* Parameter validation */ - - if (event > ACPI_EVENT_MAX) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (NULL != acpi_gbl_fixed_event_handlers[event].handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - /* Install the handler before enabling the event */ - - acpi_gbl_fixed_event_handlers[event].handler = handler; - acpi_gbl_fixed_event_handlers[event].context = context; - - status = acpi_clear_event(event); - if (ACPI_SUCCESS(status)) - status = acpi_enable_event(event, 0); - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X", - event)); - - /* Remove the handler */ - - acpi_gbl_fixed_event_handlers[event].handler = NULL; - acpi_gbl_fixed_event_handlers[event].context = NULL; - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Enabled fixed event %X, Handler=%p\n", event, - handler)); - } - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) - -/******************************************************************************* - * - * FUNCTION: acpi_remove_fixed_event_handler - * - * PARAMETERS: Event - Event type to disable. - * Handler - Address of the handler - * - * RETURN: Status - * - * DESCRIPTION: Disables the event and unregisters the event handler. - * - ******************************************************************************/ -acpi_status -acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) -{ - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); - - /* Parameter validation */ - - if (event > ACPI_EVENT_MAX) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Disable the event before removing the handler */ - - status = acpi_disable_event(event, 0); - - /* Always Remove the handler */ - - acpi_gbl_fixed_event_handlers[event].handler = NULL; - acpi_gbl_fixed_event_handlers[event].context = NULL; - - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, - "Could not write to fixed event enable register 0x%X", - event)); - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n", - event)); - } - - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) /******************************************************************************* * @@ -334,6 +118,7 @@ acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj, return AE_OK; } + /******************************************************************************* * * FUNCTION: acpi_install_notify_handler @@ -705,6 +490,224 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) /******************************************************************************* * + * FUNCTION: acpi_install_exception_handler + * + * PARAMETERS: Handler - Pointer to the handler function for the + * event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function + * + ******************************************************************************/ +#ifdef ACPI_FUTURE_USAGE +acpi_status acpi_install_exception_handler(acpi_exception_handler handler) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_exception_handler); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_exception_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + /* Install the handler */ + + acpi_gbl_exception_handler = handler; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) +#endif /* ACPI_FUTURE_USAGE */ + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_install_global_event_handler + * + * PARAMETERS: Handler - Pointer to the global event handler function + * Context - Value passed to the handler on each event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function. The global handler + * is invoked upon each incoming GPE and Fixed Event. It is + * invoked at interrupt level at the time of the event dispatch. + * Can be used to update event counters, etc. + * + ******************************************************************************/ +acpi_status +acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); + + /* Parameter validation */ + + if (!handler) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_global_event_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + acpi_gbl_global_event_handler = handler; + acpi_gbl_global_event_handler_context = context; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_install_fixed_event_handler + * + * PARAMETERS: Event - Event type to enable. + * Handler - Pointer to the handler function for the + * event + * Context - Value passed to the handler on each GPE + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function and then enables the + * event. + * + ******************************************************************************/ +acpi_status +acpi_install_fixed_event_handler(u32 event, + acpi_event_handler handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); + + /* Parameter validation */ + + if (event > ACPI_EVENT_MAX) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (NULL != acpi_gbl_fixed_event_handlers[event].handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + /* Install the handler before enabling the event */ + + acpi_gbl_fixed_event_handlers[event].handler = handler; + acpi_gbl_fixed_event_handlers[event].context = context; + + status = acpi_clear_event(event); + if (ACPI_SUCCESS(status)) + status = acpi_enable_event(event, 0); + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X", + event)); + + /* Remove the handler */ + + acpi_gbl_fixed_event_handlers[event].handler = NULL; + acpi_gbl_fixed_event_handlers[event].context = NULL; + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Enabled fixed event %X, Handler=%p\n", event, + handler)); + } + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_remove_fixed_event_handler + * + * PARAMETERS: Event - Event type to disable. + * Handler - Address of the handler + * + * RETURN: Status + * + * DESCRIPTION: Disables the event and unregisters the event handler. + * + ******************************************************************************/ +acpi_status +acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) +{ + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); + + /* Parameter validation */ + + if (event > ACPI_EVENT_MAX) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Disable the event before removing the handler */ + + status = acpi_disable_event(event, 0); + + /* Always Remove the handler */ + + acpi_gbl_fixed_event_handlers[event].handler = NULL; + acpi_gbl_fixed_event_handlers[event].context = NULL; + + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, + "Could not write to fixed event enable register 0x%X", + event)); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n", + event)); + } + + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) + +/******************************************************************************* + * * FUNCTION: acpi_install_gpe_handler * * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT @@ -984,3 +987,4 @@ acpi_status acpi_release_global_lock(u32 handle) } ACPI_EXPORT_SYMBOL(acpi_release_global_lock) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 1768bbec1002..77cee5a5e891 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -49,6 +49,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfevnt") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_enable @@ -352,3 +353,4 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) } ACPI_EXPORT_SYMBOL(acpi_get_event_status) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 33388fd69df4..86f9b343ebd4 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -50,6 +50,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfgpe") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_update_all_gpes @@ -695,3 +696,4 @@ acpi_get_gpe_device(u32 index, acpi_handle *gpe_device) } ACPI_EXPORT_SYMBOL(acpi_get_gpe_device) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index d21ec5f0b3a9..d0b9ed5df97e 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwacpi") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_hw_set_mode @@ -166,3 +167,5 @@ u32 acpi_hw_get_mode(void) return_UINT32(ACPI_SYS_MODE_LEGACY); } } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c new file mode 100644 index 000000000000..29e859293edd --- /dev/null +++ b/drivers/acpi/acpica/hwesleep.c @@ -0,0 +1,247 @@ +/****************************************************************************** + * + * Name: hwesleep.c - ACPI Hardware Sleep/Wake Support functions for the + * extended FADT-V5 sleep registers. + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwesleep") + +/******************************************************************************* + * + * FUNCTION: acpi_hw_execute_sleep_method + * + * PARAMETERS: method_pathname - Pathname of method to execute + * integer_argument - Argument to pass to the method + * + * RETURN: None + * + * DESCRIPTION: Execute a sleep/wake related method with one integer argument + * and no return value. + * + ******************************************************************************/ +void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + + ACPI_FUNCTION_TRACE(hw_execute_sleep_method); + + /* One argument, integer_argument; No return value expected */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = (u64)integer_argument; + + status = acpi_evaluate_object(NULL, method_pathname, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "While executing method %s", + method_pathname)); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_sleep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state via the extended FADT sleep + * registers (V5 FADT). + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) +{ + acpi_status status; + u8 sleep_type_value; + u64 sleep_status; + + ACPI_FUNCTION_TRACE(hw_extended_sleep); + + /* Extended sleep registers must be valid */ + + if (!acpi_gbl_FADT.sleep_control.address || + !acpi_gbl_FADT.sleep_status.address) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear wake status (WAK_STS) */ + + status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_gbl_system_awake_and_running = FALSE; + + /* Optionally execute _GTS (Going To Sleep) */ + + if (flags & ACPI_EXECUTE_GTS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); + } + + /* Flush caches, as per ACPI specification */ + + ACPI_FLUSH_CPU_CACHE(); + + /* + * Set the SLP_TYP and SLP_EN bits. + * + * Note: We only use the first value returned by the \_Sx method + * (acpi_gbl_sleep_type_a) - As per ACPI specification. + */ + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "Entering sleep state [S%u]\n", sleep_state)); + + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Wait for transition back to Working State */ + + do { + status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + } while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS)); + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake_prep + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - ACPI_EXECUTE_BFS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Perform first part of OS-independent ACPI cleanup after + * a sleep. Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) +{ + acpi_status status; + u8 sleep_type_value; + + ACPI_FUNCTION_TRACE(hw_extended_wake_prep); + + status = acpi_get_sleep_type_data(ACPI_STATE_S0, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_SUCCESS(status)) { + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + } + + /* Optionally execute _BFS (Back From Sleep) */ + + if (flags & ACPI_EXECUTE_BFS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); + } + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - Reserved, set to zero + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags) +{ + ACPI_FUNCTION_TRACE(hw_extended_wake); + + /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ + + acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; + + /* Execute the wake methods */ + + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); + + /* + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. + */ + (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + acpi_gbl_system_awake_and_running = TRUE; + + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); + return_ACPI_STATUS(AE_OK); +} diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 1a6894afef79..25bd28c4ae8d 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwgpe") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, @@ -479,3 +479,5 @@ acpi_status acpi_hw_enable_all_wakeup_gpes(void) status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL); return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 4ea4eeb51bfd..6b6c83b87b52 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -51,6 +51,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwregs") +#if (!ACPI_REDUCED_HARDWARE) /* Local Prototypes */ static acpi_status acpi_hw_read_multiple(u32 *value, @@ -62,6 +63,8 @@ acpi_hw_write_multiple(u32 value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b); +#endif /* !ACPI_REDUCED_HARDWARE */ + /****************************************************************************** * * FUNCTION: acpi_hw_validate_register @@ -154,6 +157,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) { u64 address; + u64 value64; acpi_status status; ACPI_FUNCTION_NAME(hw_read); @@ -175,7 +179,9 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) - address, value, reg->bit_width); + address, &value64, reg->bit_width); + + *value = (u32)value64; } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) @@ -225,7 +231,8 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) - address, value, reg->bit_width); + address, (u64)value, + reg->bit_width); } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) @@ -240,6 +247,7 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) return (status); } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_hw_clear_acpi_status @@ -285,7 +293,7 @@ exit: /******************************************************************************* * - * FUNCTION: acpi_hw_get_register_bit_mask + * FUNCTION: acpi_hw_get_bit_register_info * * PARAMETERS: register_id - Index of ACPI Register to access * @@ -658,3 +666,5 @@ acpi_hw_write_multiple(u32 value, return (status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 3c4a922a9fc2..0ed85cac3231 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -1,7 +1,7 @@ - /****************************************************************************** * - * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface + * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the + * original/legacy sleep/PM registers. * *****************************************************************************/ @@ -43,213 +43,37 @@ */ #include <acpi/acpi.h> +#include <linux/acpi.h> #include "accommon.h" -#include "actables.h" -#include <linux/tboot.h> #include <linux/module.h> #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwsleep") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * - * FUNCTION: acpi_set_firmware_waking_vector - * - * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode - * entry point. - * - * RETURN: Status - * - * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS - * - ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector(u32 physical_address) -{ - ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); - - - /* - * According to the ACPI specification 2.0c and later, the 64-bit - * waking vector should be cleared and the 32-bit waking vector should - * be used, unless we want the wake-up code to be called by the BIOS in - * Protected Mode. Some systems (for example HP dv5-1004nr) are known - * to fail to resume if the 64-bit vector is used. - */ - - /* Set the 32-bit vector */ - - acpi_gbl_FACS->firmware_waking_vector = physical_address; - - /* Clear the 64-bit vector if it exists */ - - if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { - acpi_gbl_FACS->xfirmware_waking_vector = 0; - } - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) - -#if ACPI_MACHINE_WIDTH == 64 -/******************************************************************************* - * - * FUNCTION: acpi_set_firmware_waking_vector64 - * - * PARAMETERS: physical_address - 64-bit physical address of ACPI protected - * mode entry point. - * - * RETURN: Status - * - * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if - * it exists in the table. This function is intended for use with - * 64-bit host operating systems. - * - ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector64(u64 physical_address) -{ - ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); - - - /* Determine if the 64-bit vector actually exists */ - - if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { - return_ACPI_STATUS(AE_NOT_EXIST); - } - - /* Clear 32-bit vector, set the 64-bit X_ vector */ - - acpi_gbl_FACS->firmware_waking_vector = 0; - acpi_gbl_FACS->xfirmware_waking_vector = physical_address; - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) -#endif - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_prep - * - * PARAMETERS: sleep_state - Which sleep state to enter - * - * RETURN: Status - * - * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231) - * This function must execute with interrupts enabled. - * We break sleeping into 2 stages so that OSPM can handle - * various OS-specific tasks between the two steps. - * - ******************************************************************************/ -acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) -{ - acpi_status status; - struct acpi_object_list arg_list; - union acpi_object arg; - - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); - - /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */ - - status = acpi_get_sleep_type_data(sleep_state, - &acpi_gbl_sleep_type_a, - &acpi_gbl_sleep_type_b); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - /* Run the _PTS method */ - - status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } - - /* Setup the argument to _SST */ - - switch (sleep_state) { - case ACPI_STATE_S0: - arg.integer.value = ACPI_SST_WORKING; - break; - - case ACPI_STATE_S1: - case ACPI_STATE_S2: - case ACPI_STATE_S3: - arg.integer.value = ACPI_SST_SLEEPING; - break; - - case ACPI_STATE_S4: - arg.integer.value = ACPI_SST_SLEEP_CONTEXT; - break; - - default: - arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */ - break; - } - - /* - * Set the system indicators to show the desired sleep state. - * _SST is an optional method (return no error if not found) - */ - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, - "While executing method _SST")); - } - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) - -static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state + * FUNCTION: acpi_hw_legacy_sleep * * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * - * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * DESCRIPTION: Enter a system sleep state via the legacy FADT PM registers * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) +acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) { - u32 pm1a_control; - u32 pm1b_control; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; + u32 pm1a_control; + u32 pm1b_control; u32 in_value; - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); - - if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || - (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { - ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", - acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); - return_ACPI_STATUS(AE_AML_OPERAND_VALUE); - } + ACPI_FUNCTION_TRACE(hw_legacy_sleep); sleep_type_reg_info = acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE); @@ -271,6 +95,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } + if (sleep_state != ACPI_STATE_S5) { + /* + * Disable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); + if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { + return_ACPI_STATUS(status); + } + } + /* * 1) Disable/Clear all GPEs * 2) Enable all wakeup GPEs @@ -286,18 +122,10 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } - if (gts) { - /* Execute the _GTS method */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + /* Optionally execute _GTS (Going To Sleep) */ - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } + if (flags & ACPI_EXECUTE_GTS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); } /* Get current value of PM1A control */ @@ -344,8 +172,12 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) ACPI_FLUSH_CPU_CACHE(); - tboot_sleep(sleep_state, pm1a_control, pm1b_control); - + status = acpi_os_prepare_sleep(sleep_state, pm1a_control, + pm1b_control); + if (ACPI_SKIP(status)) + return_ACPI_STATUS(AE_OK); + if (ACPI_FAILURE(status)) + return_ACPI_STATUS(status); /* Write #2: Write both SLP_TYP + SLP_EN */ status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control); @@ -375,114 +207,44 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) } } - /* Wait until we enter sleep state */ - - do { - status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, - &in_value); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Spin until we wake */ - - } while (!in_value); - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_s4bios - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Perform a S4 bios request. - * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED - * - ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) -{ - u32 in_value; - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); - - /* Clear the wake status bit (PM1) */ - - status = - acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_clear_acpi_status(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * 1) Disable/Clear all GPEs - * 2) Enable all wakeup GPEs - */ - status = acpi_hw_disable_all_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - acpi_gbl_system_awake_and_running = FALSE; - - status = acpi_hw_enable_all_wakeup_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - ACPI_FLUSH_CPU_CACHE(); - - status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, - (u32) acpi_gbl_FADT.S4bios_request, 8); + /* Wait for transition back to Working State */ do { - acpi_os_stall(1000); status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + } while (!in_value); return_ACPI_STATUS(AE_OK); } -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) - /******************************************************************************* * - * FUNCTION: acpi_leave_sleep_state_prep + * FUNCTION: acpi_hw_legacy_wake_prep * - * PARAMETERS: sleep_state - Which sleep state we are exiting + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a * sleep. - * Called with interrupts DISABLED. + * Called with interrupts ENABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; u32 pm1a_control; u32 pm1b_control; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + ACPI_FUNCTION_TRACE(hw_legacy_wake_prep); /* * Set SLP_TYPE and SLP_EN to state S0. @@ -525,27 +287,20 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) } } - if (bfs) { - /* Execute the _BFS method */ + /* Optionally execute _BFS (Back From Sleep) */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); - } + if (flags & ACPI_EXECUTE_BFS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); } return_ACPI_STATUS(status); } /******************************************************************************* * - * FUNCTION: acpi_leave_sleep_state + * FUNCTION: acpi_hw_legacy_wake * * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - Reserved, set to zero * * RETURN: Status * @@ -553,31 +308,17 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) * Called with interrupts ENABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state(u8 sleep_state) + +acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + ACPI_FUNCTION_TRACE(hw_legacy_wake); /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - - /* Ignore any errors from these methods */ - - arg.integer.value = ACPI_SST_WAKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); - } + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); /* * GPEs must be enabled before _WAK is called as GPEs @@ -591,46 +332,50 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + status = acpi_hw_enable_all_runtime_gpes(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } - arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK")); - } - /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ + /* + * Now we can execute _WAK, etc. Some machines require that the GPEs + * are enabled before the wake methods are executed. + */ + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); /* - * Some BIOSes assume that WAK_STS will be cleared on resume and use - * it to determine whether the system is rebooting or resuming. Clear - * it for compatibility. + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. */ acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 1); - acpi_gbl_system_awake_and_running = TRUE; /* Enable power button */ (void) acpi_write_bit_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON]. - enable_register_id, ACPI_ENABLE_EVENT); + [ACPI_EVENT_POWER_BUTTON]. + enable_register_id, ACPI_ENABLE_EVENT); (void) acpi_write_bit_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON]. - status_register_id, ACPI_CLEAR_STATUS); + [ACPI_EVENT_POWER_BUTTON]. + status_register_id, ACPI_CLEAR_STATUS); - arg.integer.value = ACPI_SST_WORKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); + /* + * Enable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); + if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { + return_ACPI_STATUS(status); } + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index d4973d9da9f1..f1b2c3b94cac 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -49,6 +49,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwtimer") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_get_timer_resolution @@ -187,3 +188,4 @@ acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed) } ACPI_EXPORT_SYMBOL(acpi_get_timer_duration) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 9d38eb6c0d0b..ab513a972c95 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -74,8 +74,7 @@ acpi_status acpi_reset(void) /* Check if the reset register is supported */ - if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || - !reset_reg->address) { + if (!reset_reg->address) { return_ACPI_STATUS(AE_NOT_EXIST); } @@ -138,11 +137,6 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) return (status); } - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - /* Initialize entire 64-bit return value to zero */ *return_value = 0; @@ -154,24 +148,17 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) - address, &value, width); + address, return_value, + reg->bit_width); if (ACPI_FAILURE(status)) { return (status); } - *return_value = value; - - if (reg->bit_width == 64) { - - /* Read the top 32 bits */ + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - status = acpi_os_read_memory((acpi_physical_address) - (address + 4), &value, 32); - if (ACPI_FAILURE(status)) { - return (status); - } - *return_value |= ((u64)value << 32); + width = reg->bit_width; + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) address, &value, width); @@ -231,32 +218,22 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) return (status); } - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - /* * Two address spaces supported: Memory or IO. PCI_Config is * not supported here because the GAS structure is insufficient */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) - address, ACPI_LODWORD(value), - width); + address, value, reg->bit_width); if (ACPI_FAILURE(status)) { return (status); } + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - if (reg->bit_width == 64) { - status = acpi_os_write_memory((acpi_physical_address) - (address + 4), - ACPI_HIDWORD(value), 32); - if (ACPI_FAILURE(status)) { - return (status); - } + width = reg->bit_width; + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) address, ACPI_LODWORD(value), @@ -286,6 +263,7 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) ACPI_EXPORT_SYMBOL(acpi_write) +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_read_bit_register @@ -453,7 +431,7 @@ unlock_and_exit: } ACPI_EXPORT_SYMBOL(acpi_write_bit_register) - +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * * FUNCTION: acpi_get_sleep_type_data diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c new file mode 100644 index 000000000000..762d059bb508 --- /dev/null +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -0,0 +1,431 @@ +/****************************************************************************** + * + * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include <linux/module.h> + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwxfsleep") + +/* Local prototypes */ +static acpi_status +acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id); + +/* + * Dispatch table used to efficiently branch to the various sleep + * functions. + */ +#define ACPI_SLEEP_FUNCTION_ID 0 +#define ACPI_WAKE_PREP_FUNCTION_ID 1 +#define ACPI_WAKE_FUNCTION_ID 2 + +/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */ + +static struct acpi_sleep_functions acpi_sleep_dispatch[] = { + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep), + acpi_hw_extended_sleep}, + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep), + acpi_hw_extended_wake_prep}, + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake} +}; + +/* + * These functions are removed for the ACPI_REDUCED_HARDWARE case: + * acpi_set_firmware_waking_vector + * acpi_set_firmware_waking_vector64 + * acpi_enter_sleep_state_s4bios + */ + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector + * + * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode + * entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS + * + ******************************************************************************/ + +acpi_status acpi_set_firmware_waking_vector(u32 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); + + + /* + * According to the ACPI specification 2.0c and later, the 64-bit + * waking vector should be cleared and the 32-bit waking vector should + * be used, unless we want the wake-up code to be called by the BIOS in + * Protected Mode. Some systems (for example HP dv5-1004nr) are known + * to fail to resume if the 64-bit vector is used. + */ + + /* Set the 32-bit vector */ + + acpi_gbl_FACS->firmware_waking_vector = physical_address; + + /* Clear the 64-bit vector if it exists */ + + if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { + acpi_gbl_FACS->xfirmware_waking_vector = 0; + } + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) + +#if ACPI_MACHINE_WIDTH == 64 +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector64 + * + * PARAMETERS: physical_address - 64-bit physical address of ACPI protected + * mode entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if + * it exists in the table. This function is intended for use with + * 64-bit host operating systems. + * + ******************************************************************************/ +acpi_status acpi_set_firmware_waking_vector64(u64 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); + + + /* Determine if the 64-bit vector actually exists */ + + if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear 32-bit vector, set the 64-bit X_ vector */ + + acpi_gbl_FACS->firmware_waking_vector = 0; + acpi_gbl_FACS->xfirmware_waking_vector = physical_address; + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_s4bios + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Perform a S4 bios request. + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) +{ + u32 in_value; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); + + /* Clear the wake status bit (PM1) */ + + status = + acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_clear_acpi_status(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * 1) Disable/Clear all GPEs + * 2) Enable all wakeup GPEs + */ + status = acpi_hw_disable_all_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + acpi_gbl_system_awake_and_running = FALSE; + + status = acpi_hw_enable_all_wakeup_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + ACPI_FLUSH_CPU_CACHE(); + + status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, + (u32)acpi_gbl_FADT.S4bios_request, 8); + + do { + acpi_os_stall(1000); + status = + acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } while (!in_value); + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) +#endif /* !ACPI_REDUCED_HARDWARE */ +/******************************************************************************* + * + * FUNCTION: acpi_hw_sleep_dispatch + * + * PARAMETERS: sleep_state - Which sleep state to enter/exit + * function_id - Sleep, wake_prep, or Wake + * + * RETURN: Status from the invoked sleep handling function. + * + * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling + * function. + * + ******************************************************************************/ +static acpi_status +acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) +{ + acpi_status status; + struct acpi_sleep_functions *sleep_functions = + &acpi_sleep_dispatch[function_id]; + +#if (!ACPI_REDUCED_HARDWARE) + + /* + * If the Hardware Reduced flag is set (from the FADT), we must + * use the extended sleep registers + */ + if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + status = sleep_functions->extended_function(sleep_state, flags); + } else { + /* Legacy sleep */ + + status = sleep_functions->legacy_function(sleep_state, flags); + } + + return (status); + +#else + /* + * For the case where reduced-hardware-only code is being generated, + * we know that only the extended sleep registers are available + */ + status = sleep_functions->extended_function(sleep_state, flags); + return (status); + +#endif /* !ACPI_REDUCED_HARDWARE */ +} + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Prepare to enter a system sleep state. + * This function must execute with interrupts enabled. + * We break sleeping into 2 stages so that OSPM can handle + * various OS-specific tasks between the two steps. + * + ******************************************************************************/ + +acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) +{ + acpi_status status; + struct acpi_object_list arg_list; + union acpi_object arg; + u32 sst_value; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); + + status = acpi_get_sleep_type_data(sleep_state, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Execute the _PTS method (Prepare To Sleep) */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; + + status = + acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } + + /* Setup the argument to the _SST method (System STatus) */ + + switch (sleep_state) { + case ACPI_STATE_S0: + sst_value = ACPI_SST_WORKING; + break; + + case ACPI_STATE_S1: + case ACPI_STATE_S2: + case ACPI_STATE_S3: + sst_value = ACPI_SST_SLEEPING; + break; + + case ACPI_STATE_S4: + sst_value = ACPI_SST_SLEEP_CONTEXT; + break; + + default: + sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */ + break; + } + + /* + * Set the system indicators to show the desired sleep state. + * _SST is an optional method (return no error if not found) + */ + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value); + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); + + if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || + (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { + ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", + acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); + return_ACPI_STATUS(AE_AML_OPERAND_VALUE); + } + + status = + acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state we are exiting + * Flags - ACPI_EXECUTE_BFS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a + * sleep. + * Called with interrupts DISABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + + status = + acpi_hw_sleep_dispatch(sleep_state, flags, + ACPI_WAKE_PREP_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state we are exiting + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state(u8 sleep_state) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + + + status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index b7f2b3be79ac..3f7f3f6e7dd5 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -242,7 +242,20 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, if (!obj_desc) { - /* No attached object, we are done */ + /* No attached object. Some types should always have an object */ + + switch (type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_PACKAGE: + case ACPI_TYPE_BUFFER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_METHOD: + acpi_os_printf("<No attached object>"); + break; + + default: + break; + } acpi_os_printf("\n"); return (AE_OK); diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c index 30ea5bc53a78..3b5acb0eb406 100644 --- a/drivers/acpi/acpica/nsdumpdv.c +++ b/drivers/acpi/acpica/nsdumpdv.c @@ -121,7 +121,7 @@ void acpi_ns_dump_root_devices(void) return; } - status = acpi_get_handle(NULL, ACPI_NS_SYSTEM_BUS, &sys_bus_handle); + status = acpi_get_handle(NULL, METHOD_NAME__SB_, &sys_bus_handle); if (ACPI_FAILURE(status)) { return; } diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index bbe46a447d34..23ce09686418 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -638,8 +638,8 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Create the new outer package and populate it */ status = - acpi_ns_repair_package_list(data, - return_object_ptr); + acpi_ns_wrap_with_package(data, *elements, + return_object_ptr); if (ACPI_FAILURE(status)) { return (status); } diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 9c35d20eb52b..5519a64a353f 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -71,11 +71,10 @@ ACPI_MODULE_NAME("nsrepair") * Buffer -> String * Buffer -> Package of Integers * Package -> Package of one Package + * An incorrect standalone object is wrapped with required outer package * * Additional possible repairs: - * * Required package elements that are NULL replaced by Integer/String/Buffer - * Incorrect standalone package wrapped with required outer package * ******************************************************************************/ /* Local prototypes */ @@ -91,10 +90,6 @@ static acpi_status acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, union acpi_operand_object **return_object); -static acpi_status -acpi_ns_convert_to_package(union acpi_operand_object *original_object, - union acpi_operand_object **return_object); - /******************************************************************************* * * FUNCTION: acpi_ns_repair_object @@ -151,9 +146,24 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, } } if (expected_btypes & ACPI_RTYPE_PACKAGE) { - status = acpi_ns_convert_to_package(return_object, &new_object); + /* + * A package is expected. We will wrap the existing object with a + * new package object. It is often the case that if a variable-length + * package is required, but there is only a single object needed, the + * BIOS will return that object instead of wrapping it with a Package + * object. Note: after the wrapping, the package will be validated + * for correct contents (expected object type or types). + */ + status = + acpi_ns_wrap_with_package(data, return_object, &new_object); if (ACPI_SUCCESS(status)) { - goto object_repaired; + /* + * The original object just had its reference count + * incremented for being inserted into the new package. + */ + *return_object_ptr = new_object; /* New Package object */ + data->flags |= ACPI_OBJECT_REPAIRED; + return (AE_OK); } } @@ -165,22 +175,27 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, /* Object was successfully repaired */ - /* - * If the original object is a package element, we need to: - * 1. Set the reference count of the new object to match the - * reference count of the old object. - * 2. Decrement the reference count of the original object. - */ if (package_index != ACPI_NOT_PACKAGE_ELEMENT) { - new_object->common.reference_count = - return_object->common.reference_count; + /* + * The original object is a package element. We need to + * decrement the reference count of the original object, + * for removing it from the package. + * + * However, if the original object was just wrapped with a + * package object as part of the repair, we don't need to + * change the reference count. + */ + if (!(data->flags & ACPI_OBJECT_WRAPPED)) { + new_object->common.reference_count = + return_object->common.reference_count; - if (return_object->common.reference_count > 1) { - return_object->common.reference_count--; + if (return_object->common.reference_count > 1) { + return_object->common.reference_count--; + } } ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, - "%s: Converted %s to expected %s at index %u\n", + "%s: Converted %s to expected %s at Package index %u\n", data->pathname, acpi_ut_get_object_type_name(return_object), acpi_ut_get_object_type_name(new_object), @@ -453,65 +468,6 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, /******************************************************************************* * - * FUNCTION: acpi_ns_convert_to_package - * - * PARAMETERS: original_object - Object to be converted - * return_object - Where the new converted object is returned - * - * RETURN: Status. AE_OK if conversion was successful. - * - * DESCRIPTION: Attempt to convert a Buffer object to a Package. Each byte of - * the buffer is converted to a single integer package element. - * - ******************************************************************************/ - -static acpi_status -acpi_ns_convert_to_package(union acpi_operand_object *original_object, - union acpi_operand_object **return_object) -{ - union acpi_operand_object *new_object; - union acpi_operand_object **elements; - u32 length; - u8 *buffer; - - switch (original_object->common.type) { - case ACPI_TYPE_BUFFER: - - /* Buffer-to-Package conversion */ - - length = original_object->buffer.length; - new_object = acpi_ut_create_package_object(length); - if (!new_object) { - return (AE_NO_MEMORY); - } - - /* Convert each buffer byte to an integer package element */ - - elements = new_object->package.elements; - buffer = original_object->buffer.pointer; - - while (length--) { - *elements = - acpi_ut_create_integer_object((u64) *buffer); - if (!*elements) { - acpi_ut_remove_reference(new_object); - return (AE_NO_MEMORY); - } - elements++; - buffer++; - } - break; - - default: - return (AE_AML_OPERAND_TYPE); - } - - *return_object = new_object; - return (AE_OK); -} - -/******************************************************************************* - * * FUNCTION: acpi_ns_repair_null_element * * PARAMETERS: Data - Pointer to validation data structure @@ -677,55 +633,56 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, /******************************************************************************* * - * FUNCTION: acpi_ns_repair_package_list + * FUNCTION: acpi_ns_wrap_with_package * * PARAMETERS: Data - Pointer to validation data structure - * obj_desc_ptr - Pointer to the object to repair. The new - * package object is returned here, - * overwriting the old object. + * original_object - Pointer to the object to repair. + * obj_desc_ptr - The new package object is returned here * * RETURN: Status, new object in *obj_desc_ptr * - * DESCRIPTION: Repair a common problem with objects that are defined to return - * a variable-length Package of Packages. If the variable-length - * is one, some BIOS code mistakenly simply declares a single - * Package instead of a Package with one sub-Package. This - * function attempts to repair this error by wrapping a Package - * object around the original Package, creating the correct - * Package with one sub-Package. + * DESCRIPTION: Repair a common problem with objects that are defined to + * return a variable-length Package of sub-objects. If there is + * only one sub-object, some BIOS code mistakenly simply declares + * the single object instead of a Package with one sub-object. + * This function attempts to repair this error by wrapping a + * Package object around the original object, creating the + * correct and expected Package with one sub-object. * * Names that can be repaired in this manner include: - * _ALR, _CSD, _HPX, _MLS, _PRT, _PSS, _TRT, TSS + * _ALR, _CSD, _HPX, _MLS, _PLD, _PRT, _PSS, _TRT, _TSS, + * _BCL, _DOD, _FIX, _Sx * ******************************************************************************/ acpi_status -acpi_ns_repair_package_list(struct acpi_predefined_data *data, - union acpi_operand_object **obj_desc_ptr) +acpi_ns_wrap_with_package(struct acpi_predefined_data *data, + union acpi_operand_object *original_object, + union acpi_operand_object **obj_desc_ptr) { union acpi_operand_object *pkg_obj_desc; - ACPI_FUNCTION_NAME(ns_repair_package_list); + ACPI_FUNCTION_NAME(ns_wrap_with_package); /* * Create the new outer package and populate it. The new package will - * have a single element, the lone subpackage. + * have a single element, the lone sub-object. */ pkg_obj_desc = acpi_ut_create_package_object(1); if (!pkg_obj_desc) { return (AE_NO_MEMORY); } - pkg_obj_desc->package.elements[0] = *obj_desc_ptr; + pkg_obj_desc->package.elements[0] = original_object; + + ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, + "%s: Wrapped %s with expected Package object\n", + data->pathname, + acpi_ut_get_object_type_name(original_object))); /* Return the new object in the object pointer */ *obj_desc_ptr = pkg_obj_desc; - data->flags |= ACPI_OBJECT_REPAIRED; - - ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, - "%s: Repaired incorrectly formed Package\n", - data->pathname)); - + data->flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED; return (AE_OK); } diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index a535b7afda5c..75113759f69d 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -341,7 +341,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) if (!acpi_ns_valid_path_separator(*external_name) && (*external_name != 0)) { - return_ACPI_STATUS(AE_BAD_PARAMETER); + return_ACPI_STATUS(AE_BAD_PATHNAME); } /* Move on the next segment */ diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index c5d870406f41..4c9c760db4a4 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -363,10 +363,6 @@ static void acpi_tb_convert_fadt(void) u32 address32; u32 i; - /* Update the local FADT table header length */ - - acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); - /* * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary. * Later code will always use the X 64-bit field. Also, check for an @@ -408,6 +404,10 @@ static void acpi_tb_convert_fadt(void) acpi_gbl_FADT.boot_flags = 0; } + /* Update the local FADT table header length */ + + acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); + /* * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X" * generic address structures as necessary. Later code will always use diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index 1aecf7baa4e0..c03500b4cc7a 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -114,7 +114,6 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) { u32 i; acpi_status status = AE_OK; - struct acpi_table_header *override_table = NULL; ACPI_FUNCTION_TRACE(tb_add_table); @@ -224,25 +223,10 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) /* * ACPI Table Override: * Allow the host to override dynamically loaded tables. + * NOTE: the table is fully mapped at this point, and the mapping will + * be deleted by tb_table_override if the table is actually overridden. */ - status = acpi_os_table_override(table_desc->pointer, &override_table); - if (ACPI_SUCCESS(status) && override_table) { - ACPI_INFO((AE_INFO, - "%4.4s @ 0x%p Table override, replaced with:", - table_desc->pointer->signature, - ACPI_CAST_PTR(void, table_desc->address))); - - /* We can delete the table that was passed as a parameter */ - - acpi_tb_delete_table(table_desc); - - /* Setup descriptor for the new table */ - - table_desc->address = ACPI_PTR_TO_PHYSADDR(override_table); - table_desc->pointer = override_table; - table_desc->length = override_table->length; - table_desc->flags = ACPI_TABLE_ORIGIN_OVERRIDE; - } + (void)acpi_tb_table_override(table_desc->pointer, table_desc); /* Add the table to the global root table list */ @@ -263,6 +247,95 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) /******************************************************************************* * + * FUNCTION: acpi_tb_table_override + * + * PARAMETERS: table_header - Header for the original table + * table_desc - Table descriptor initialized for the + * original table. May or may not be mapped. + * + * RETURN: Pointer to the entire new table. NULL if table not overridden. + * If overridden, installs the new table within the input table + * descriptor. + * + * DESCRIPTION: Attempt table override by calling the OSL override functions. + * Note: If the table is overridden, then the entire new table + * is mapped and returned by this function. + * + ******************************************************************************/ + +struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header + *table_header, + struct acpi_table_desc + *table_desc) +{ + acpi_status status; + struct acpi_table_header *new_table = NULL; + acpi_physical_address new_address = 0; + u32 new_table_length = 0; + u8 new_flags; + char *override_type; + + /* (1) Attempt logical override (returns a logical address) */ + + status = acpi_os_table_override(table_header, &new_table); + if (ACPI_SUCCESS(status) && new_table) { + new_address = ACPI_PTR_TO_PHYSADDR(new_table); + new_table_length = new_table->length; + new_flags = ACPI_TABLE_ORIGIN_OVERRIDE; + override_type = "Logical"; + goto finish_override; + } + + /* (2) Attempt physical override (returns a physical address) */ + + status = acpi_os_physical_table_override(table_header, + &new_address, + &new_table_length); + if (ACPI_SUCCESS(status) && new_address && new_table_length) { + + /* Map the entire new table */ + + new_table = acpi_os_map_memory(new_address, new_table_length); + if (!new_table) { + ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY, + "%4.4s %p Attempted physical table override failed", + table_header->signature, + ACPI_CAST_PTR(void, + table_desc->address))); + return (NULL); + } + + override_type = "Physical"; + new_flags = ACPI_TABLE_ORIGIN_MAPPED; + goto finish_override; + } + + return (NULL); /* There was no override */ + + finish_override: + + ACPI_INFO((AE_INFO, + "%4.4s %p %s table override, new table: %p", + table_header->signature, + ACPI_CAST_PTR(void, table_desc->address), + override_type, new_table)); + + /* We can now unmap/delete the original table (if fully mapped) */ + + acpi_tb_delete_table(table_desc); + + /* Setup descriptor for the new table */ + + table_desc->address = new_address; + table_desc->pointer = new_table; + table_desc->length = new_table_length; + table_desc->flags = new_flags; + + return (new_table); +} + +/******************************************************************************* + * * FUNCTION: acpi_tb_resize_root_table_list * * PARAMETERS: None @@ -396,7 +469,11 @@ void acpi_tb_delete_table(struct acpi_table_desc *table_desc) case ACPI_TABLE_ORIGIN_ALLOCATED: ACPI_FREE(table_desc->pointer); break; - default:; + + /* Not mapped or allocated, there is nothing we can do */ + + default: + return; } table_desc->pointer = NULL; diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 09ca39e14337..0a706cac37de 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -118,6 +118,7 @@ acpi_tb_check_xsdt(acpi_physical_address address) return AE_OK; } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_tb_initialize_facs @@ -148,6 +149,7 @@ acpi_status acpi_tb_initialize_facs(void) &acpi_gbl_FACS)); return status; } +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * @@ -444,7 +446,7 @@ struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index) * RETURN: None * * DESCRIPTION: Install an ACPI table into the global data structure. The - * table override mechanism is implemented here to allow the host + * table override mechanism is called to allow the host * OS to replace any table before it is installed in the root * table array. * @@ -454,11 +456,9 @@ void acpi_tb_install_table(acpi_physical_address address, char *signature, u32 table_index) { - u8 flags; - acpi_status status; - struct acpi_table_header *table_to_install; - struct acpi_table_header *mapped_table; - struct acpi_table_header *override_table = NULL; + struct acpi_table_header *table; + struct acpi_table_header *final_table; + struct acpi_table_desc *table_desc; if (!address) { ACPI_ERROR((AE_INFO, @@ -469,69 +469,78 @@ acpi_tb_install_table(acpi_physical_address address, /* Map just the table header */ - mapped_table = - acpi_os_map_memory(address, sizeof(struct acpi_table_header)); - if (!mapped_table) { + table = acpi_os_map_memory(address, sizeof(struct acpi_table_header)); + if (!table) { + ACPI_ERROR((AE_INFO, + "Could not map memory for table [%s] at %p", + signature, ACPI_CAST_PTR(void, address))); return; } /* If a particular signature is expected (DSDT/FACS), it must match */ - if (signature && !ACPI_COMPARE_NAME(mapped_table->signature, signature)) { + if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) { ACPI_ERROR((AE_INFO, "Invalid signature 0x%X for ACPI table, expected [%s]", - *ACPI_CAST_PTR(u32, mapped_table->signature), - signature)); + *ACPI_CAST_PTR(u32, table->signature), signature)); goto unmap_and_exit; } /* + * Initialize the table entry. Set the pointer to NULL, since the + * table is not fully mapped at this time. + */ + table_desc = &acpi_gbl_root_table_list.tables[table_index]; + + table_desc->address = address; + table_desc->pointer = NULL; + table_desc->length = table->length; + table_desc->flags = ACPI_TABLE_ORIGIN_MAPPED; + ACPI_MOVE_32_TO_32(table_desc->signature.ascii, table->signature); + + /* * ACPI Table Override: * * Before we install the table, let the host OS override it with a new * one if desired. Any table within the RSDT/XSDT can be replaced, * including the DSDT which is pointed to by the FADT. + * + * NOTE: If the table is overridden, then final_table will contain a + * mapped pointer to the full new table. If the table is not overridden, + * or if there has been a physical override, then the table will be + * fully mapped later (in verify table). In any case, we must + * unmap the header that was mapped above. */ - status = acpi_os_table_override(mapped_table, &override_table); - if (ACPI_SUCCESS(status) && override_table) { - ACPI_INFO((AE_INFO, - "%4.4s @ 0x%p Table override, replaced with:", - mapped_table->signature, ACPI_CAST_PTR(void, - address))); - - acpi_gbl_root_table_list.tables[table_index].pointer = - override_table; - address = ACPI_PTR_TO_PHYSADDR(override_table); - - table_to_install = override_table; - flags = ACPI_TABLE_ORIGIN_OVERRIDE; - } else { - table_to_install = mapped_table; - flags = ACPI_TABLE_ORIGIN_MAPPED; + final_table = acpi_tb_table_override(table, table_desc); + if (!final_table) { + final_table = table; /* There was no override */ } - /* Initialize the table entry */ + acpi_tb_print_table_header(table_desc->address, final_table); - acpi_gbl_root_table_list.tables[table_index].address = address; - acpi_gbl_root_table_list.tables[table_index].length = - table_to_install->length; - acpi_gbl_root_table_list.tables[table_index].flags = flags; - - ACPI_MOVE_32_TO_32(& - (acpi_gbl_root_table_list.tables[table_index]. - signature), table_to_install->signature); - - acpi_tb_print_table_header(address, table_to_install); + /* Set the global integer width (based upon revision of the DSDT) */ if (table_index == ACPI_TABLE_INDEX_DSDT) { + acpi_ut_set_integer_width(final_table->revision); + } - /* Global integer width is based upon revision of the DSDT */ - - acpi_ut_set_integer_width(table_to_install->revision); + /* + * If we have a physical override during this early loading of the ACPI + * tables, unmap the table for now. It will be mapped again later when + * it is actually used. This supports very early loading of ACPI tables, + * before virtual memory is fully initialized and running within the + * host OS. Note: A logical override has the ACPI_TABLE_ORIGIN_OVERRIDE + * flag set and will not be deleted below. + */ + if (final_table != table) { + acpi_tb_delete_table(table_desc); } unmap_and_exit: - acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header)); + + /* Always unmap the table header that we mapped above */ + + acpi_os_unmap_memory(table, sizeof(struct acpi_table_header)); } /******************************************************************************* diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c index d42ede5260c7..684849949bf3 100644 --- a/drivers/acpi/acpica/utdecode.c +++ b/drivers/acpi/acpica/utdecode.c @@ -497,19 +497,20 @@ char *acpi_ut_get_mutex_name(u32 mutex_id) /* Names for Notify() values, used for debug output */ -static const char *acpi_gbl_notify_value_names[] = { - "Bus Check", - "Device Check", - "Device Wake", - "Eject Request", - "Device Check Light", - "Frequency Mismatch", - "Bus Mode Mismatch", - "Power Fault", - "Capabilities Check", - "Device PLD Check", - "Reserved", - "System Locality Update" +static const char *acpi_gbl_notify_value_names[ACPI_NOTIFY_MAX + 1] = { + /* 00 */ "Bus Check", + /* 01 */ "Device Check", + /* 02 */ "Device Wake", + /* 03 */ "Eject Request", + /* 04 */ "Device Check Light", + /* 05 */ "Frequency Mismatch", + /* 06 */ "Bus Mode Mismatch", + /* 07 */ "Power Fault", + /* 08 */ "Capabilities Check", + /* 09 */ "Device PLD Check", + /* 10 */ "Reserved", + /* 11 */ "System Locality Update", + /* 12 */ "Shutdown Request" }; const char *acpi_ut_get_notify_name(u32 notify_value) @@ -519,9 +520,10 @@ const char *acpi_ut_get_notify_name(u32 notify_value) return (acpi_gbl_notify_value_names[notify_value]); } else if (notify_value <= ACPI_MAX_SYS_NOTIFY) { return ("Reserved"); - } else { /* Greater or equal to 0x80 */ - - return ("**Device Specific**"); + } else if (notify_value <= ACPI_MAX_DEVICE_SPECIFIC_NOTIFY) { + return ("Device Specific"); + } else { + return ("Hardware Specific"); } } #endif diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index 4153584cf526..90f53b42eca9 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -140,6 +140,7 @@ const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = { {NULL, ACPI_TYPE_ANY, NULL} }; +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * * Event and Hardware globals @@ -236,6 +237,7 @@ struct acpi_fixed_event_info acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS] = ACPI_BITMASK_RT_CLOCK_STATUS, ACPI_BITMASK_RT_CLOCK_ENABLE}, }; +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * @@ -286,6 +288,8 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000; +#if (!ACPI_REDUCED_HARDWARE) + /* GPE support */ acpi_gbl_gpe_xrupt_list_head = NULL; @@ -294,6 +298,10 @@ acpi_status acpi_ut_init_globals(void) acpi_current_gpe_count = 0; acpi_gbl_all_gpes_initialized = FALSE; + acpi_gbl_global_event_handler = NULL; + +#endif /* !ACPI_REDUCED_HARDWARE */ + /* Global handlers */ acpi_gbl_system_notify.handler = NULL; @@ -302,7 +310,6 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_init_handler = NULL; acpi_gbl_table_handler = NULL; acpi_gbl_interface_handler = NULL; - acpi_gbl_global_event_handler = NULL; /* Global Lock support */ diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c index 8359c0c5dc98..246798e4c938 100644 --- a/drivers/acpi/acpica/utinit.c +++ b/drivers/acpi/acpica/utinit.c @@ -53,27 +53,35 @@ ACPI_MODULE_NAME("utinit") /* Local prototypes */ static void acpi_ut_terminate(void); +#if (!ACPI_REDUCED_HARDWARE) + +static void acpi_ut_free_gpe_lists(void); + +#else + +#define acpi_ut_free_gpe_lists() +#endif /* !ACPI_REDUCED_HARDWARE */ + +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * - * FUNCTION: acpi_ut_terminate + * FUNCTION: acpi_ut_free_gpe_lists * * PARAMETERS: none * * RETURN: none * - * DESCRIPTION: Free global memory + * DESCRIPTION: Free global GPE lists * ******************************************************************************/ -static void acpi_ut_terminate(void) +static void acpi_ut_free_gpe_lists(void) { struct acpi_gpe_block_info *gpe_block; struct acpi_gpe_block_info *next_gpe_block; struct acpi_gpe_xrupt_info *gpe_xrupt_info; struct acpi_gpe_xrupt_info *next_gpe_xrupt_info; - ACPI_FUNCTION_TRACE(ut_terminate); - /* Free global GPE blocks and related info structures */ gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; @@ -91,7 +99,26 @@ static void acpi_ut_terminate(void) ACPI_FREE(gpe_xrupt_info); gpe_xrupt_info = next_gpe_xrupt_info; } +} +#endif /* !ACPI_REDUCED_HARDWARE */ + +/****************************************************************************** + * + * FUNCTION: acpi_ut_terminate + * + * PARAMETERS: none + * + * RETURN: none + * + * DESCRIPTION: Free global memory + * + ******************************************************************************/ + +static void acpi_ut_terminate(void) +{ + ACPI_FUNCTION_TRACE(ut_terminate); + acpi_ut_free_gpe_lists(); acpi_ut_delete_address_lists(); return_VOID; } diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 644e8c8ebc4b..afa94f51ff0b 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -145,6 +145,8 @@ acpi_status acpi_enable_subsystem(u32 flags) ACPI_FUNCTION_TRACE(acpi_enable_subsystem); +#if (!ACPI_REDUCED_HARDWARE) + /* Enable ACPI mode */ if (!(flags & ACPI_NO_ACPI_ENABLE)) { @@ -169,6 +171,7 @@ acpi_status acpi_enable_subsystem(u32 flags) ACPI_WARNING((AE_INFO, "Could not map the FACS table")); return_ACPI_STATUS(status); } +#endif /* !ACPI_REDUCED_HARDWARE */ /* * Install the default op_region handlers. These are installed unless @@ -184,7 +187,7 @@ acpi_status acpi_enable_subsystem(u32 flags) return_ACPI_STATUS(status); } } - +#if (!ACPI_REDUCED_HARDWARE) /* * Initialize ACPI Event handling (Fixed and General Purpose) * @@ -220,6 +223,7 @@ acpi_status acpi_enable_subsystem(u32 flags) return_ACPI_STATUS(status); } } +#endif /* !ACPI_REDUCED_HARDWARE */ return_ACPI_STATUS(status); } diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index e5d53b7ddc7e..5577762daee1 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -558,33 +558,48 @@ void apei_resources_release(struct apei_resources *resources) } EXPORT_SYMBOL_GPL(apei_resources_release); -static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr) +static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, + u32 *access_bit_width) { - u32 width, space_id; + u32 bit_width, bit_offset, access_size_code, space_id; - width = reg->bit_width; + bit_width = reg->bit_width; + bit_offset = reg->bit_offset; + access_size_code = reg->access_width; space_id = reg->space_id; /* Handle possible alignment issues */ memcpy(paddr, ®->address, sizeof(*paddr)); if (!*paddr) { pr_warning(FW_BUG APEI_PFX - "Invalid physical address in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid physical address in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } - if ((width != 8) && (width != 16) && (width != 32) && (width != 64)) { + if (access_size_code < 1 || access_size_code > 4) { pr_warning(FW_BUG APEI_PFX - "Invalid bit width in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid access size code in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); + return -EINVAL; + } + *access_bit_width = 1UL << (access_size_code + 2); + + if ((bit_width + bit_offset) > *access_bit_width) { + pr_warning(FW_BUG APEI_PFX + "Invalid bit width + offset in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } if (space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY && space_id != ACPI_ADR_SPACE_SYSTEM_IO) { pr_warning(FW_BUG APEI_PFX - "Invalid address space type in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid address space type in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } @@ -595,23 +610,25 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr) int apei_read(u64 *val, struct acpi_generic_address *reg) { int rc; + u32 access_bit_width; u64 address; acpi_status status; - rc = apei_check_gar(reg, &address); + rc = apei_check_gar(reg, &address, &access_bit_width); if (rc) return rc; *val = 0; switch(reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_read_memory64((acpi_physical_address) - address, val, reg->bit_width); + status = acpi_os_read_memory((acpi_physical_address) address, + val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; case ACPI_ADR_SPACE_SYSTEM_IO: - status = acpi_os_read_port(address, (u32 *)val, reg->bit_width); + status = acpi_os_read_port(address, (u32 *)val, + access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; @@ -627,22 +644,23 @@ EXPORT_SYMBOL_GPL(apei_read); int apei_write(u64 val, struct acpi_generic_address *reg) { int rc; + u32 access_bit_width; u64 address; acpi_status status; - rc = apei_check_gar(reg, &address); + rc = apei_check_gar(reg, &address, &access_bit_width); if (rc) return rc; switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_write_memory64((acpi_physical_address) - address, val, reg->bit_width); + status = acpi_os_write_memory((acpi_physical_address) address, + val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; case ACPI_ADR_SPACE_SYSTEM_IO: - status = acpi_os_write_port(address, val, reg->bit_width); + status = acpi_os_write_port(address, val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; @@ -661,23 +679,24 @@ static int collect_res_callback(struct apei_exec_context *ctx, struct apei_resources *resources = data; struct acpi_generic_address *reg = &entry->register_region; u8 ins = entry->instruction; + u32 access_bit_width; u64 paddr; int rc; if (!(ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)) return 0; - rc = apei_check_gar(reg, &paddr); + rc = apei_check_gar(reg, &paddr, &access_bit_width); if (rc) return rc; switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: return apei_res_add(&resources->iomem, paddr, - reg->bit_width / 8); + access_bit_width / 8); case ACPI_ADR_SPACE_SYSTEM_IO: return apei_res_add(&resources->ioport, paddr, - reg->bit_width / 8); + access_bit_width / 8); default: return -EINVAL; } diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index 5d4189464d63..e6defd86b424 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -362,6 +362,7 @@ void apei_estatus_print(const char *pfx, gedata_len = gdata->error_data_length; apei_estatus_print_section(pfx, gdata, sec_no); data_len -= gedata_len + sizeof(*gdata); + gdata = (void *)(gdata + 1) + gedata_len; sec_no++; } } @@ -396,6 +397,7 @@ int apei_estatus_check(const struct acpi_hest_generic_status *estatus) if (gedata_len > data_len - sizeof(*gdata)) return -EINVAL; data_len -= gedata_len + sizeof(*gdata); + gdata = (void *)(gdata + 1) + gedata_len; } if (data_len) return -EINVAL; diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 4ca087dd5f4f..8e1793649ec0 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -74,6 +74,8 @@ struct vendor_error_type_extension { u8 reserved[3]; }; +static u32 notrigger; + static u32 vendor_flags; static struct debugfs_blob_wrapper vendor_blob; static char vendor_dev[64]; @@ -238,7 +240,7 @@ static void *einj_get_parameter_address(void) return v5param; } } - if (paddrv4) { + if (param_extension && paddrv4) { struct einj_parameter *v4param; v4param = acpi_os_map_memory(paddrv4, sizeof(*v4param)); @@ -496,9 +498,11 @@ static int __einj_error_inject(u32 type, u64 param1, u64 param2) if (rc) return rc; trigger_paddr = apei_exec_ctx_get_output(&ctx); - rc = __einj_error_trigger(trigger_paddr, type, param1, param2); - if (rc) - return rc; + if (notrigger == 0) { + rc = __einj_error_trigger(trigger_paddr, type, param1, param2); + if (rc) + return rc; + } rc = apei_exec_run_optional(&ctx, ACPI_EINJ_END_OPERATION); return rc; @@ -700,6 +704,11 @@ static int __init einj_init(void) einj_debug_dir, &error_param2); if (!fentry) goto err_unmap; + + fentry = debugfs_create_x32("notrigger", S_IRUSR | S_IWUSR, + einj_debug_dir, ¬rigger); + if (!fentry) + goto err_unmap; } if (vendor_dev[0]) { diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index eb9fab5b96e4..e4d9d24eb73d 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -917,7 +917,7 @@ static int erst_check_table(struct acpi_table_erst *erst_tab) { if ((erst_tab->header_length != (sizeof(struct acpi_table_erst) - sizeof(erst_tab->header))) - && (erst_tab->header_length != sizeof(struct acpi_table_einj))) + && (erst_tab->header_length != sizeof(struct acpi_table_erst))) return -EINVAL; if (erst_tab->header.length < sizeof(struct acpi_table_erst)) return -EINVAL; diff --git a/drivers/acpi/bgrt.c b/drivers/acpi/bgrt.c new file mode 100644 index 000000000000..8cf6c46e99fb --- /dev/null +++ b/drivers/acpi/bgrt.c @@ -0,0 +1,175 @@ +/* + * Copyright 2012 Red Hat, Inc <mjg@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <acpi/acpi.h> +#include <acpi/acpi_bus.h> + +static struct acpi_table_bgrt *bgrt_tab; +static struct kobject *bgrt_kobj; + +struct bmp_header { + u16 id; + u32 size; +} __attribute ((packed)); + +static struct bmp_header bmp_header; + +static ssize_t show_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->version); +} +static DEVICE_ATTR(version, S_IRUGO, show_version, NULL); + +static ssize_t show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->status); +} +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +static ssize_t show_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_type); +} +static DEVICE_ATTR(type, S_IRUGO, show_type, NULL); + +static ssize_t show_xoffset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_x); +} +static DEVICE_ATTR(xoffset, S_IRUGO, show_xoffset, NULL); + +static ssize_t show_yoffset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_y); +} +static DEVICE_ATTR(yoffset, S_IRUGO, show_yoffset, NULL); + +static ssize_t show_image(struct file *file, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + int size = attr->size; + void __iomem *image = attr->private; + + if (off >= size) { + count = 0; + } else { + if (off + count > size) + count = size - off; + + memcpy_fromio(buf, image+off, count); + } + + return count; +} + +static struct bin_attribute image_attr = { + .attr = { + .name = "image", + .mode = S_IRUGO, + }, + .read = show_image, +}; + +static struct attribute *bgrt_attributes[] = { + &dev_attr_version.attr, + &dev_attr_status.attr, + &dev_attr_type.attr, + &dev_attr_xoffset.attr, + &dev_attr_yoffset.attr, + NULL, +}; + +static struct attribute_group bgrt_attribute_group = { + .attrs = bgrt_attributes, +}; + +static int __init bgrt_init(void) +{ + acpi_status status; + int ret; + void __iomem *bgrt; + + if (acpi_disabled) + return -ENODEV; + + status = acpi_get_table("BGRT", 0, + (struct acpi_table_header **)&bgrt_tab); + + if (ACPI_FAILURE(status)) + return -ENODEV; + + sysfs_bin_attr_init(&image_attr); + + bgrt = ioremap(bgrt_tab->image_address, sizeof(struct bmp_header)); + + if (!bgrt) { + ret = -EINVAL; + goto out_err; + } + + memcpy_fromio(&bmp_header, bgrt, sizeof(bmp_header)); + image_attr.size = bmp_header.size; + iounmap(bgrt); + + image_attr.private = ioremap(bgrt_tab->image_address, image_attr.size); + + if (!image_attr.private) { + ret = -EINVAL; + goto out_err; + } + + + bgrt_kobj = kobject_create_and_add("bgrt", acpi_kobj); + if (!bgrt_kobj) { + ret = -EINVAL; + goto out_iounmap; + } + + ret = sysfs_create_group(bgrt_kobj, &bgrt_attribute_group); + if (ret) + goto out_kobject; + + ret = sysfs_create_bin_file(bgrt_kobj, &image_attr); + if (ret) + goto out_group; + + return 0; + +out_group: + sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); +out_kobject: + kobject_put(bgrt_kobj); +out_iounmap: + iounmap(image_attr.private); +out_err: + return ret; +} + +static void __exit bgrt_exit(void) +{ + iounmap(image_attr.private); + sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); + sysfs_remove_bin_file(bgrt_kobj, &image_attr); +} + +module_init(bgrt_init); +module_exit(bgrt_exit); + +MODULE_AUTHOR("Matthew Garrett"); +MODULE_DESCRIPTION("BGRT boot graphic support"); +MODULE_LICENSE("GPL"); diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9ecec98bc76e..3263b68cdfa3 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -1010,6 +1010,7 @@ static int __init acpi_bus_init(void) } struct kobject *acpi_kobj; +EXPORT_SYMBOL_GPL(acpi_kobj); static int __init acpi_init(void) { diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index e37615f310d7..7edaccce6640 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -822,10 +822,10 @@ static int acpi_ec_add(struct acpi_device *device) first_ec = ec; device->driver_data = ec; - WARN(!request_region(ec->data_addr, 1, "EC data"), - "Could not request EC data io port 0x%lx", ec->data_addr); - WARN(!request_region(ec->command_addr, 1, "EC cmd"), - "Could not request EC cmd io port 0x%lx", ec->command_addr); + ret = !!request_region(ec->data_addr, 1, "EC data"); + WARN(!ret, "Could not request EC data io port 0x%lx", ec->data_addr); + ret = !!request_region(ec->command_addr, 1, "EC cmd"); + WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr); pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); diff --git a/drivers/acpi/ec_sys.c b/drivers/acpi/ec_sys.c index b258cab9061c..7586544fddb4 100644 --- a/drivers/acpi/ec_sys.c +++ b/drivers/acpi/ec_sys.c @@ -27,12 +27,6 @@ MODULE_PARM_DESC(write_support, "Dangerous, reboot and removal of battery may " static struct dentry *acpi_ec_debugfs_dir; -static int acpi_ec_open_io(struct inode *i, struct file *f) -{ - f->private_data = i->i_private; - return 0; -} - static ssize_t acpi_ec_read_io(struct file *f, char __user *buf, size_t count, loff_t *off) { @@ -95,7 +89,7 @@ static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf, static const struct file_operations acpi_ec_io_ops = { .owner = THIS_MODULE, - .open = acpi_ec_open_io, + .open = simple_open, .read = acpi_ec_read_io, .write = acpi_ec_write_io, .llseek = default_llseek, diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 7a2035fa8c71..266bc58ce0ce 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -95,8 +95,8 @@ static int suspend_nvs_register(unsigned long start, unsigned long size) { struct nvs_page *entry, *next; - pr_info("PM: Registering ACPI NVS region at %lx (%ld bytes)\n", - start, size); + pr_info("PM: Registering ACPI NVS region [mem %#010lx-%#010lx] (%ld bytes)\n", + start, start + size - 1, size); while (size > 0) { unsigned int nr_bytes; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 412a1e04a922..ba14fb93c929 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -77,6 +77,9 @@ EXPORT_SYMBOL(acpi_in_debugger); extern char line_buf[80]; #endif /*ENABLE_DEBUGGER */ +static int (*__acpi_os_prepare_sleep)(u8 sleep_state, u32 pm1a_ctrl, + u32 pm1b_ctrl); + static acpi_osd_handler acpi_irq_handler; static void *acpi_irq_context; static struct workqueue_struct *kacpid_wq; @@ -347,7 +350,7 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) unsigned long pfn; pfn = pg_off >> PAGE_SHIFT; - if (page_is_ram(pfn)) + if (should_use_kmap(pfn)) kunmap(pfn_to_page(pfn)); else iounmap(vaddr); @@ -554,6 +557,15 @@ acpi_os_table_override(struct acpi_table_header * existing_table, return AE_OK; } +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address * new_address, + u32 *new_table_length) +{ + return AE_SUPPORT; +} + + static irqreturn_t acpi_irq(int irq, void *dev_id) { u32 handled; @@ -595,7 +607,8 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler, acpi_irq_handler = handler; acpi_irq_context = context; - if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) { + if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi", + acpi_irq)) { printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq); acpi_irq_handler = NULL; return AE_NOT_ACQUIRED; @@ -699,49 +712,6 @@ acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width) EXPORT_SYMBOL(acpi_os_write_port); -acpi_status -acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width) -{ - void __iomem *virt_addr; - unsigned int size = width / 8; - bool unmap = false; - u32 dummy; - - rcu_read_lock(); - virt_addr = acpi_map_vaddr_lookup(phys_addr, size); - if (!virt_addr) { - rcu_read_unlock(); - virt_addr = acpi_os_ioremap(phys_addr, size); - if (!virt_addr) - return AE_BAD_ADDRESS; - unmap = true; - } - - if (!value) - value = &dummy; - - switch (width) { - case 8: - *(u8 *) value = readb(virt_addr); - break; - case 16: - *(u16 *) value = readw(virt_addr); - break; - case 32: - *(u32 *) value = readl(virt_addr); - break; - default: - BUG(); - } - - if (unmap) - iounmap(virt_addr); - else - rcu_read_unlock(); - - return AE_OK; -} - #ifdef readq static inline u64 read64(const volatile void __iomem *addr) { @@ -758,7 +728,7 @@ static inline u64 read64(const volatile void __iomem *addr) #endif acpi_status -acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width) +acpi_os_read_memory(acpi_physical_address phys_addr, u64 *value, u32 width) { void __iomem *virt_addr; unsigned int size = width / 8; @@ -803,45 +773,6 @@ acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width) return AE_OK; } -acpi_status -acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width) -{ - void __iomem *virt_addr; - unsigned int size = width / 8; - bool unmap = false; - - rcu_read_lock(); - virt_addr = acpi_map_vaddr_lookup(phys_addr, size); - if (!virt_addr) { - rcu_read_unlock(); - virt_addr = acpi_os_ioremap(phys_addr, size); - if (!virt_addr) - return AE_BAD_ADDRESS; - unmap = true; - } - - switch (width) { - case 8: - writeb(value, virt_addr); - break; - case 16: - writew(value, virt_addr); - break; - case 32: - writel(value, virt_addr); - break; - default: - BUG(); - } - - if (unmap) - iounmap(virt_addr); - else - rcu_read_unlock(); - - return AE_OK; -} - #ifdef writeq static inline void write64(u64 val, volatile void __iomem *addr) { @@ -856,7 +787,7 @@ static inline void write64(u64 val, volatile void __iomem *addr) #endif acpi_status -acpi_os_write_memory64(acpi_physical_address phys_addr, u64 value, u32 width) +acpi_os_write_memory(acpi_physical_address phys_addr, u64 value, u32 width) { void __iomem *virt_addr; unsigned int size = width / 8; @@ -1641,3 +1572,24 @@ acpi_status acpi_os_terminate(void) return AE_OK; } + +acpi_status acpi_os_prepare_sleep(u8 sleep_state, u32 pm1a_control, + u32 pm1b_control) +{ + int rc = 0; + if (__acpi_os_prepare_sleep) + rc = __acpi_os_prepare_sleep(sleep_state, + pm1a_control, pm1b_control); + if (rc < 0) + return AE_ERROR; + else if (rc > 0) + return AE_CTRL_SKIP; + + return AE_OK; +} + +void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, + u32 pm1a_ctrl, u32 pm1b_ctrl)) +{ + __acpi_os_prepare_sleep = func; +} diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 9ac2a9fa90ff..7049a7d27c4f 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -40,9 +40,11 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/slab.h> +#include <linux/pm_runtime.h> #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> #include "sleep.h" +#include "internal.h" #define PREFIX "ACPI: " @@ -77,6 +79,20 @@ static struct acpi_driver acpi_power_driver = { }, }; +/* + * A power managed device + * A device may rely on multiple power resources. + * */ +struct acpi_power_managed_device { + struct device *dev; /* The physical device */ + acpi_handle *handle; +}; + +struct acpi_power_resource_device { + struct acpi_power_managed_device *device; + struct acpi_power_resource_device *next; +}; + struct acpi_power_resource { struct acpi_device * device; acpi_bus_id name; @@ -84,6 +100,9 @@ struct acpi_power_resource { u32 order; unsigned int ref_count; struct mutex resource_lock; + + /* List of devices relying on this power resource */ + struct acpi_power_resource_device *devices; }; static struct list_head acpi_power_resource_list; @@ -183,8 +202,26 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) return 0; } +/* Resume the device when all power resources in _PR0 are on */ +static void acpi_power_on_device(struct acpi_power_managed_device *device) +{ + struct acpi_device *acpi_dev; + acpi_handle handle = device->handle; + int state; + + if (acpi_bus_get_device(handle, &acpi_dev)) + return; + + if(acpi_power_get_inferred_state(acpi_dev, &state)) + return; + + if (state == ACPI_STATE_D0 && pm_runtime_suspended(device->dev)) + pm_request_resume(device->dev); +} + static int __acpi_power_on(struct acpi_power_resource *resource) { + struct acpi_power_resource_device *device_list = resource->devices; acpi_status status = AE_OK; status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL); @@ -197,6 +234,12 @@ static int __acpi_power_on(struct acpi_power_resource *resource) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n", resource->name)); + while (device_list) { + acpi_power_on_device(device_list->device); + + device_list = device_list->next; + } + return 0; } @@ -299,6 +342,125 @@ static int acpi_power_on_list(struct acpi_handle_list *list) return result; } +static void __acpi_power_resource_unregister_device(struct device *dev, + acpi_handle res_handle) +{ + struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *prev, *curr; + + if (acpi_power_get_context(res_handle, &resource)) + return; + + mutex_lock(&resource->resource_lock); + prev = NULL; + curr = resource->devices; + while (curr) { + if (curr->device->dev == dev) { + if (!prev) + resource->devices = curr->next; + else + prev->next = curr->next; + + kfree(curr); + break; + } + + prev = curr; + curr = curr->next; + } + mutex_unlock(&resource->resource_lock); +} + +/* Unlink dev from all power resources in _PR0 */ +void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handle) +{ + struct acpi_device *acpi_dev; + struct acpi_handle_list *list; + int i; + + if (!dev || !handle) + return; + + if (acpi_bus_get_device(handle, &acpi_dev)) + return; + + list = &acpi_dev->power.states[ACPI_STATE_D0].resources; + + for (i = 0; i < list->count; i++) + __acpi_power_resource_unregister_device(dev, + list->handles[i]); +} + +static int __acpi_power_resource_register_device( + struct acpi_power_managed_device *powered_device, acpi_handle handle) +{ + struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *power_resource_device; + int result; + + result = acpi_power_get_context(handle, &resource); + if (result) + return result; + + power_resource_device = kzalloc( + sizeof(*power_resource_device), GFP_KERNEL); + if (!power_resource_device) + return -ENOMEM; + + power_resource_device->device = powered_device; + + mutex_lock(&resource->resource_lock); + power_resource_device->next = resource->devices; + resource->devices = power_resource_device; + mutex_unlock(&resource->resource_lock); + + return 0; +} + +/* Link dev to all power resources in _PR0 */ +int acpi_power_resource_register_device(struct device *dev, acpi_handle handle) +{ + struct acpi_device *acpi_dev; + struct acpi_handle_list *list; + struct acpi_power_managed_device *powered_device; + int i, ret; + + if (!dev || !handle) + return -ENODEV; + + ret = acpi_bus_get_device(handle, &acpi_dev); + if (ret) + goto no_power_resource; + + if (!acpi_dev->power.flags.power_resources) + goto no_power_resource; + + powered_device = kzalloc(sizeof(*powered_device), GFP_KERNEL); + if (!powered_device) + return -ENOMEM; + + powered_device->dev = dev; + powered_device->handle = handle; + + list = &acpi_dev->power.states[ACPI_STATE_D0].resources; + + for (i = 0; i < list->count; i++) { + ret = __acpi_power_resource_register_device(powered_device, + list->handles[i]); + + if (ret) { + acpi_power_resource_unregister_device(dev, handle); + break; + } + } + + return ret; + +no_power_resource: + printk(KERN_WARNING PREFIX "Invalid Power Resource to register!"); + return -ENODEV; +} + /** * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in * ACPI 3.0) _PSW (Power State Wake) @@ -500,14 +662,14 @@ int acpi_power_transition(struct acpi_device *device, int state) { int result; - if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3)) + if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD)) return -EINVAL; if (device->power.state == state) return 0; if ((device->power.state < ACPI_STATE_D0) - || (device->power.state > ACPI_STATE_D3)) + || (device->power.state > ACPI_STATE_D3_COLD)) return -ENODEV; /* TBD: Resources must be ordered. */ diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index d4d9cb7e016a..0734086537b8 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -67,6 +67,7 @@ #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 +#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" #define ACPI_PROCESSOR_LIMIT_USER 0 #define ACPI_PROCESSOR_LIMIT_THERMAL 1 @@ -87,7 +88,7 @@ static int acpi_processor_start(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, - {"ACPI0007", 0}, + {ACPI_PROCESSOR_DEVICE_HID, 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); @@ -535,8 +536,8 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) return -ENOMEM; if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { - kfree(pr); - return -ENOMEM; + result = -ENOMEM; + goto err_free_pr; } pr->handle = device->handle; @@ -576,7 +577,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) dev = get_cpu_device(pr->id); if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) { result = -EFAULT; - goto err_free_cpumask; + goto err_clear_processor; } /* @@ -594,9 +595,15 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) err_remove_sysfs: sysfs_remove_link(&device->dev.kobj, "sysdev"); +err_clear_processor: + /* + * processor_device_array is not cleared to allow checks for buggy BIOS + */ + per_cpu(processors, pr->id) = NULL; err_free_cpumask: free_cpumask_var(pr->throttling.shared_cpu_map); - +err_free_pr: + kfree(pr); return result; } @@ -741,20 +748,46 @@ static void acpi_processor_hotplug_notify(acpi_handle handle, return; } +static acpi_status is_processor_device(acpi_handle handle) +{ + struct acpi_device_info *info; + char *hid; + acpi_status status; + + status = acpi_get_object_info(handle, &info); + if (ACPI_FAILURE(status)) + return status; + + if (info->type == ACPI_TYPE_PROCESSOR) { + kfree(info); + return AE_OK; /* found a processor object */ + } + + if (!(info->valid & ACPI_VALID_HID)) { + kfree(info); + return AE_ERROR; + } + + hid = info->hardware_id.string; + if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) { + kfree(info); + return AE_ERROR; + } + + kfree(info); + return AE_OK; /* found a processor device object */ +} + static acpi_status processor_walk_namespace_cb(acpi_handle handle, u32 lvl, void *context, void **rv) { acpi_status status; int *action = context; - acpi_object_type type = 0; - status = acpi_get_type(handle, &type); + status = is_processor_device(handle); if (ACPI_FAILURE(status)) - return (AE_OK); - - if (type != ACPI_TYPE_PROCESSOR) - return (AE_OK); + return AE_OK; /* not a processor; continue to walk */ switch (*action) { case INSTALL_NOTIFY_HANDLER: @@ -772,7 +805,8 @@ processor_walk_namespace_cb(acpi_handle handle, break; } - return (AE_OK); + /* found a processor; skip walking underneath */ + return AE_CTRL_DEPTH; } static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) @@ -830,7 +864,7 @@ void acpi_processor_install_hotplug_notify(void) { #ifdef CONFIG_ACPI_HOTPLUG_CPU int action = INSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, + acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, processor_walk_namespace_cb, NULL, &action, NULL); @@ -843,7 +877,7 @@ void acpi_processor_uninstall_hotplug_notify(void) { #ifdef CONFIG_ACPI_HOTPLUG_CPU int action = UNINSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, + acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, processor_walk_namespace_cb, NULL, &action, NULL); diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 0e8e2de2ed3e..f3decb30223f 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -770,6 +770,35 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return index; } + +/** + * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining) + * @dev: the target CPU + * @index: the index of suggested state + */ +static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) +{ + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage); + + ACPI_FLUSH_CPU_CACHE(); + + while (1) { + + if (cx->entry_method == ACPI_CSTATE_HALT) + safe_halt(); + else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) { + inb(cx->address); + /* See comment in acpi_idle_do_entry() */ + inl(acpi_gbl_FADT.xpm_timer_block.address); + } else + return -ENODEV; + } + + /* Never reached */ + return 0; +} + /** * acpi_idle_enter_simple - enters an ACPI state without BM handling * @dev: the target CPU @@ -1077,12 +1106,14 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_c1; + state->enter_dead = acpi_idle_play_dead; drv->safe_state_index = count; break; case ACPI_STATE_C2: state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_simple; + state->enter_dead = acpi_idle_play_dead; drv->safe_state_index = count; break; @@ -1159,8 +1190,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) * to make the code that updates C-States be called once. */ - if (smp_processor_id() == 0 && - cpuidle_get_driver() == &acpi_idle_driver) { + if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) { cpuidle_pause_and_lock(); /* Protect against cpu-hotplug */ diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 3b599abf2b40..641b5450a0db 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -57,6 +57,27 @@ ACPI_MODULE_NAME("processor_thermal"); static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg); static unsigned int acpi_thermal_cpufreq_is_init = 0; +#define reduction_pctg(cpu) \ + per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu)) + +/* + * Emulate "per package data" using per cpu data (which should really be + * provided elsewhere) + * + * Note we can lose a CPU on cpu hotunplug, in this case we forget the state + * temporarily. Fortunately that's not a big issue here (I hope) + */ +static int phys_package_first_cpu(int cpu) +{ + int i; + int id = topology_physical_package_id(cpu); + + for_each_online_cpu(i) + if (topology_physical_package_id(i) == id) + return i; + return 0; +} + static int cpu_has_cpufreq(unsigned int cpu) { struct cpufreq_policy policy; @@ -76,7 +97,7 @@ static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb, max_freq = ( policy->cpuinfo.max_freq * - (100 - per_cpu(cpufreq_thermal_reduction_pctg, policy->cpu) * 20) + (100 - reduction_pctg(policy->cpu) * 20) ) / 100; cpufreq_verify_within_limits(policy, 0, max_freq); @@ -102,16 +123,28 @@ static int cpufreq_get_cur_state(unsigned int cpu) if (!cpu_has_cpufreq(cpu)) return 0; - return per_cpu(cpufreq_thermal_reduction_pctg, cpu); + return reduction_pctg(cpu); } static int cpufreq_set_cur_state(unsigned int cpu, int state) { + int i; + if (!cpu_has_cpufreq(cpu)) return 0; - per_cpu(cpufreq_thermal_reduction_pctg, cpu) = state; - cpufreq_update_policy(cpu); + reduction_pctg(cpu) = state; + + /* + * Update all the CPUs in the same package because they all + * contribute to the temperature and often share the same + * frequency. + */ + for_each_online_cpu(i) { + if (topology_physical_package_id(i) == + topology_physical_package_id(cpu)) + cpufreq_update_policy(i); + } return 0; } @@ -119,10 +152,6 @@ void acpi_thermal_cpufreq_init(void) { int i; - for (i = 0; i < nr_cpu_ids; i++) - if (cpu_present(i)) - per_cpu(cpufreq_thermal_reduction_pctg, i) = 0; - i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); if (!i) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 605a2954ef17..1d02b7b5ade0 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -769,7 +769,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, u64 *value) { u32 bit_width, bit_offset; - u64 ptc_value; + u32 ptc_value; u64 ptc_mask; struct acpi_processor_throttling *throttling; int ret = -1; @@ -777,12 +777,11 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, throttling = &pr->throttling; switch (throttling->status_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: - ptc_value = 0; bit_width = throttling->status_register.bit_width; bit_offset = throttling->status_register.bit_offset; acpi_os_read_port((acpi_io_address) throttling->status_register. - address, (u32 *) &ptc_value, + address, &ptc_value, (u32) (bit_width + bit_offset)); ptc_mask = (1 << bit_width) - 1; *value = (u64) ((ptc_value >> bit_offset) & ptc_mask); diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index a6c77e8b37bd..c1d612435939 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -23,8 +23,7 @@ void acpi_reboot(void) /* Is the reset register supported? The spec says we should be * checking the bit width and bit offset, but Windows ignores * these fields */ - if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER)) - return; + /* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */ reset_value = acpi_gbl_FADT.reset_value; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8ab80bafe3f1..767e2dcb9616 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -880,18 +880,22 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) int j; device->power.flags.power_resources = 1; - ps->flags.valid = 1; for (j = 0; j < ps->resources.count; j++) acpi_bus_add_power_resource(ps->resources.handles[j]); } + /* The exist of _PR3 indicates D3Cold support */ + if (i == ACPI_STATE_D3) { + status = acpi_get_handle(device->handle, object_name, &handle); + if (ACPI_SUCCESS(status)) + device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1; + } + /* Evaluate "_PSx" to see if we can do explicit sets */ object_name[2] = 'S'; status = acpi_get_handle(device->handle, object_name, &handle); - if (ACPI_SUCCESS(status)) { + if (ACPI_SUCCESS(status)) ps->flags.explicit_set = 1; - ps->flags.valid = 1; - } /* State is valid if we have some power control */ if (ps->resources.count || ps->flags.explicit_set) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ca191ff97844..1d661b5c3287 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -17,6 +17,8 @@ #include <linux/suspend.h> #include <linux/reboot.h> #include <linux/acpi.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> #include <asm/io.h> @@ -26,6 +28,24 @@ #include "internal.h" #include "sleep.h" +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + +static u8 wake_sleep_flags(void) +{ + u8 flags = ACPI_NO_OPTIONAL_METHODS; + + if (gts) + flags |= ACPI_EXECUTE_GTS; + if (bfs) + flags |= ACPI_EXECUTE_BFS; + + return flags; +} + static u8 sleep_states[ACPI_S_STATE_COUNT]; static void acpi_sleep_tts_switch(u32 acpi_state) @@ -243,6 +263,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; u32 acpi_state = acpi_target_sleep_state; + u8 flags = wake_sleep_flags(); int error; ACPI_FLUSH_CPU_CACHE(); @@ -250,7 +271,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state); + status = acpi_enter_sleep_state(acpi_state, flags); break; case ACPI_STATE_S3: @@ -265,7 +286,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state); + acpi_leave_sleep_state_prep(acpi_state, flags); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -529,27 +550,30 @@ static int acpi_hibernation_begin(void) static int acpi_hibernation_enter(void) { + u8 flags = wake_sleep_flags(); acpi_status status = AE_OK; ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4); + status = acpi_enter_sleep_state(ACPI_STATE_S4, flags); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_hibernation_leave(void) { + u8 flags = wake_sleep_flags(); + /* * If ACPI is not enabled by the BIOS and the boot kernel, we need to * enable it here. */ acpi_enable(); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -730,6 +754,40 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) #ifdef CONFIG_PM_SLEEP /** + * acpi_pm_device_run_wake - Enable/disable wake-up for given device. + * @phys_dev: Device to enable/disable the platform to wake-up the system for. + * @enable: Whether enable or disable the wake-up functionality. + * + * Find the ACPI device object corresponding to @pci_dev and try to + * enable/disable the GPE associated with it. + */ +int acpi_pm_device_run_wake(struct device *phys_dev, bool enable) +{ + struct acpi_device *dev; + acpi_handle handle; + + if (!device_run_wake(phys_dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(phys_dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { + dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", + __func__); + return -ENODEV; + } + + if (enable) { + acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); + acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); + } else { + acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); + acpi_disable_wakeup_device_power(dev); + } + + return 0; +} + +/** * acpi_pm_device_sleep_wake - enable or disable the system wake-up * capability of given device * @dev: device to handle @@ -770,10 +828,12 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { + u8 flags = wake_sleep_flags(); + /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5); + acpi_enter_sleep_state(ACPI_STATE_S5, flags); } /* @@ -788,13 +848,13 @@ static void __init acpi_gts_bfs_check(void) { acpi_handle dummy; - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy))) + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy))) { printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " "please notify linux-acpi@vger.kernel.org\n"); } - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy))) + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy))) { printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 48fbc647b178..7dbebea1ec31 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -941,13 +941,13 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) if (!tz) return -EINVAL; - /* Get temperature [_TMP] (required) */ - result = acpi_thermal_get_temperature(tz); + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); if (result) return result; - /* Get trip points [_CRT, _PSV, etc.] (required) */ - result = acpi_thermal_get_trip_points(tz); + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); if (result) return result; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index eaef02afc7cf..9577b6fa2650 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -548,27 +548,27 @@ acpi_video_device_EDID(struct acpi_video_device *device, * 1. The system BIOS should NOT automatically control the brightness * level of the LCD when the power changes from AC to DC. * Return Value: - * -1 wrong arg. + * -EINVAL wrong arg. */ static int acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) { - u64 status = 0; + acpi_status status; union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list args = { 1, &arg0 }; - if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) { - status = -1; - goto Failed; - } + if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) + return -EINVAL; arg0.integer.value = (lcd_flag << 2) | bios_flag; video->dos_setting = arg0.integer.value; - acpi_evaluate_object(video->device->handle, "_DOS", &args, NULL); + status = acpi_evaluate_object(video->device->handle, "_DOS", + &args, NULL); + if (ACPI_FAILURE(status)) + return -EIO; - Failed: - return status; + return 0; } /* @@ -1343,15 +1343,17 @@ static int acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { - int status = 0; + int status; struct acpi_device *dev; - acpi_video_device_enumerate(video); + status = acpi_video_device_enumerate(video); + if (status) + return status; list_for_each_entry(dev, &device->children, node) { status = acpi_video_bus_get_one_device(dev, video); - if (ACPI_FAILURE(status)) { + if (status) { printk(KERN_WARNING PREFIX "Can't attach device\n"); continue; @@ -1653,15 +1655,20 @@ static int acpi_video_bus_add(struct acpi_device *device) mutex_init(&video->device_list_lock); INIT_LIST_HEAD(&video->video_device_list); - acpi_video_bus_get_devices(video, device); - acpi_video_bus_start_devices(video); + error = acpi_video_bus_get_devices(video, device); + if (error) + goto err_free_video; video->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_stop_video; + goto err_put_video; } + error = acpi_video_bus_start_devices(video); + if (error) + goto err_free_input_dev; + snprintf(video->phys, sizeof(video->phys), "%s/video/input0", acpi_device_hid(video->device)); @@ -1682,7 +1689,7 @@ static int acpi_video_bus_add(struct acpi_device *device) error = input_register_device(input); if (error) - goto err_free_input_dev; + goto err_stop_video; printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device), @@ -1692,14 +1699,19 @@ static int acpi_video_bus_add(struct acpi_device *device) video->pm_nb.notifier_call = acpi_video_resume; video->pm_nb.priority = 0; - register_pm_notifier(&video->pm_nb); + error = register_pm_notifier(&video->pm_nb); + if (error) + goto err_unregister_input_dev; return 0; - err_free_input_dev: - input_free_device(input); + err_unregister_input_dev: + input_unregister_device(input); err_stop_video: acpi_video_bus_stop_devices(video); + err_free_input_dev: + input_free_device(input); + err_put_video: acpi_video_bus_put_devices(video); kfree(video->attached_array); err_free_video: diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 6c9387d646ec..5401814c874d 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -16,10 +16,11 @@ #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/mutex.h> -#include <linux/kthread.h> +#include <linux/workqueue.h> #include <linux/highmem.h> #include <linux/firmware.h> #include <linux/slab.h> +#include <linux/sched.h> #define to_dev(obj) container_of(obj, struct device, kobj) @@ -81,6 +82,11 @@ enum { static int loading_timeout = 60; /* In seconds */ +static inline long firmware_loading_timeout(void) +{ + return loading_timeout > 0 ? loading_timeout * HZ : MAX_SCHEDULE_TIMEOUT; +} + /* fw_lock could be moved to 'struct firmware_priv' but since it is just * guarding for corner cases a global lock should be OK */ static DEFINE_MUTEX(fw_lock); @@ -440,13 +446,11 @@ fw_create_instance(struct firmware *firmware, const char *fw_name, { struct firmware_priv *fw_priv; struct device *f_dev; - int error; fw_priv = kzalloc(sizeof(*fw_priv) + strlen(fw_name) + 1 , GFP_KERNEL); if (!fw_priv) { dev_err(device, "%s: kmalloc failed\n", __func__); - error = -ENOMEM; - goto err_out; + return ERR_PTR(-ENOMEM); } fw_priv->fw = firmware; @@ -463,98 +467,80 @@ fw_create_instance(struct firmware *firmware, const char *fw_name, f_dev->parent = device; f_dev->class = &firmware_class; - dev_set_uevent_suppress(f_dev, true); - - /* Need to pin this module until class device is destroyed */ - __module_get(THIS_MODULE); - - error = device_add(f_dev); - if (error) { - dev_err(device, "%s: device_register failed\n", __func__); - goto err_put_dev; - } - - error = device_create_bin_file(f_dev, &firmware_attr_data); - if (error) { - dev_err(device, "%s: sysfs_create_bin_file failed\n", __func__); - goto err_del_dev; - } - - error = device_create_file(f_dev, &dev_attr_loading); - if (error) { - dev_err(device, "%s: device_create_file failed\n", __func__); - goto err_del_bin_attr; - } - - if (uevent) - dev_set_uevent_suppress(f_dev, false); - return fw_priv; - -err_del_bin_attr: - device_remove_bin_file(f_dev, &firmware_attr_data); -err_del_dev: - device_del(f_dev); -err_put_dev: - put_device(f_dev); -err_out: - return ERR_PTR(error); } -static void fw_destroy_instance(struct firmware_priv *fw_priv) -{ - struct device *f_dev = &fw_priv->dev; - - device_remove_file(f_dev, &dev_attr_loading); - device_remove_bin_file(f_dev, &firmware_attr_data); - device_unregister(f_dev); -} - -static int _request_firmware(const struct firmware **firmware_p, - const char *name, struct device *device, - bool uevent, bool nowait) +static struct firmware_priv * +_request_firmware_prepare(const struct firmware **firmware_p, const char *name, + struct device *device, bool uevent, bool nowait) { - struct firmware_priv *fw_priv; struct firmware *firmware; - int retval = 0; + struct firmware_priv *fw_priv; if (!firmware_p) - return -EINVAL; + return ERR_PTR(-EINVAL); *firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL); if (!firmware) { dev_err(device, "%s: kmalloc(struct firmware) failed\n", __func__); - return -ENOMEM; + return ERR_PTR(-ENOMEM); } if (fw_get_builtin_firmware(firmware, name)) { dev_dbg(device, "firmware: using built-in firmware %s\n", name); - return 0; + return NULL; + } + + fw_priv = fw_create_instance(firmware, name, device, uevent, nowait); + if (IS_ERR(fw_priv)) { + release_firmware(firmware); + *firmware_p = NULL; } + return fw_priv; +} - read_lock_usermodehelper(); +static void _request_firmware_cleanup(const struct firmware **firmware_p) +{ + release_firmware(*firmware_p); + *firmware_p = NULL; +} - if (WARN_ON(usermodehelper_is_disabled())) { - dev_err(device, "firmware: %s will not be loaded\n", name); - retval = -EBUSY; - goto out; +static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent, + long timeout) +{ + int retval = 0; + struct device *f_dev = &fw_priv->dev; + + dev_set_uevent_suppress(f_dev, true); + + /* Need to pin this module until class device is destroyed */ + __module_get(THIS_MODULE); + + retval = device_add(f_dev); + if (retval) { + dev_err(f_dev, "%s: device_register failed\n", __func__); + goto err_put_dev; } - if (uevent) - dev_dbg(device, "firmware: requesting %s\n", name); + retval = device_create_bin_file(f_dev, &firmware_attr_data); + if (retval) { + dev_err(f_dev, "%s: sysfs_create_bin_file failed\n", __func__); + goto err_del_dev; + } - fw_priv = fw_create_instance(firmware, name, device, uevent, nowait); - if (IS_ERR(fw_priv)) { - retval = PTR_ERR(fw_priv); - goto out; + retval = device_create_file(f_dev, &dev_attr_loading); + if (retval) { + dev_err(f_dev, "%s: device_create_file failed\n", __func__); + goto err_del_bin_attr; } if (uevent) { - if (loading_timeout > 0) + dev_set_uevent_suppress(f_dev, false); + dev_dbg(f_dev, "firmware: requesting %s\n", fw_priv->fw_id); + if (timeout != MAX_SCHEDULE_TIMEOUT) mod_timer(&fw_priv->timeout, - round_jiffies_up(jiffies + - loading_timeout * HZ)); + round_jiffies_up(jiffies + timeout)); kobject_uevent(&fw_priv->dev.kobj, KOBJ_ADD); } @@ -570,16 +556,13 @@ static int _request_firmware(const struct firmware **firmware_p, fw_priv->fw = NULL; mutex_unlock(&fw_lock); - fw_destroy_instance(fw_priv); - -out: - read_unlock_usermodehelper(); - - if (retval) { - release_firmware(firmware); - *firmware_p = NULL; - } - + device_remove_file(f_dev, &dev_attr_loading); +err_del_bin_attr: + device_remove_bin_file(f_dev, &firmware_attr_data); +err_del_dev: + device_del(f_dev); +err_put_dev: + put_device(f_dev); return retval; } @@ -602,7 +585,26 @@ int request_firmware(const struct firmware **firmware_p, const char *name, struct device *device) { - return _request_firmware(firmware_p, name, device, true, false); + struct firmware_priv *fw_priv; + int ret; + + fw_priv = _request_firmware_prepare(firmware_p, name, device, true, + false); + if (IS_ERR_OR_NULL(fw_priv)) + return PTR_RET(fw_priv); + + ret = usermodehelper_read_trylock(); + if (WARN_ON(ret)) { + dev_err(device, "firmware: %s will not be loaded\n", name); + } else { + ret = _request_firmware_load(fw_priv, true, + firmware_loading_timeout()); + usermodehelper_read_unlock(); + } + if (ret) + _request_firmware_cleanup(firmware_p); + + return ret; } /** @@ -629,25 +631,39 @@ struct firmware_work { bool uevent; }; -static int request_firmware_work_func(void *arg) +static void request_firmware_work_func(struct work_struct *work) { - struct firmware_work *fw_work = arg; + struct firmware_work *fw_work; const struct firmware *fw; + struct firmware_priv *fw_priv; + long timeout; int ret; - if (!arg) { - WARN_ON(1); - return 0; + fw_work = container_of(work, struct firmware_work, work); + fw_priv = _request_firmware_prepare(&fw, fw_work->name, fw_work->device, + fw_work->uevent, true); + if (IS_ERR_OR_NULL(fw_priv)) { + ret = PTR_RET(fw_priv); + goto out; + } + + timeout = usermodehelper_read_lock_wait(firmware_loading_timeout()); + if (timeout) { + ret = _request_firmware_load(fw_priv, fw_work->uevent, timeout); + usermodehelper_read_unlock(); + } else { + dev_dbg(fw_work->device, "firmware: %s loading timed out\n", + fw_work->name); + ret = -EAGAIN; } + if (ret) + _request_firmware_cleanup(&fw); - ret = _request_firmware(&fw, fw_work->name, fw_work->device, - fw_work->uevent, true); + out: fw_work->cont(fw, fw_work->context); module_put(fw_work->module); kfree(fw_work); - - return ret; } /** @@ -673,7 +689,6 @@ request_firmware_nowait( const char *name, struct device *device, gfp_t gfp, void *context, void (*cont)(const struct firmware *fw, void *context)) { - struct task_struct *task; struct firmware_work *fw_work; fw_work = kzalloc(sizeof (struct firmware_work), gfp); @@ -692,15 +707,8 @@ request_firmware_nowait( return -EFAULT; } - task = kthread_run(request_firmware_work_func, fw_work, - "firmware/%s", name); - if (IS_ERR(task)) { - fw_work->cont(NULL, fw_work->context); - module_put(fw_work->module); - kfree(fw_work); - return PTR_ERR(task); - } - + INIT_WORK(&fw_work->work, request_firmware_work_func); + schedule_work(&fw_work->work); return 0; } diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 541f821d4ea6..bd0f3949bcf9 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -532,6 +532,8 @@ static int rpm_suspend(struct device *dev, int rpmflags) dev->power.suspend_time = ktime_set(0, 0); dev->power.max_time_suspended_ns = -1; dev->power.deferred_resume = false; + wake_up_all(&dev->power.wait_queue); + if (retval == -EAGAIN || retval == -EBUSY) { dev->power.runtime_error = 0; @@ -547,7 +549,6 @@ static int rpm_suspend(struct device *dev, int rpmflags) } else { pm_runtime_cancel_pending(dev); } - wake_up_all(&dev->power.wait_queue); goto out; } diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c index 5157fa04c2f0..92b779ee002b 100644 --- a/drivers/base/regmap/regcache-rbtree.c +++ b/drivers/base/regmap/regcache-rbtree.c @@ -138,6 +138,7 @@ static int rbtree_show(struct seq_file *s, void *ignored) unsigned int base, top; int nodes = 0; int registers = 0; + int average; mutex_lock(&map->lock); @@ -152,8 +153,13 @@ static int rbtree_show(struct seq_file *s, void *ignored) registers += top - base + 1; } + if (nodes) + average = registers / nodes; + else + average = 0; + seq_printf(s, "%d nodes, %d registers, average %d registers\n", - nodes, registers, registers / nodes); + nodes, registers, average); mutex_unlock(&map->lock); @@ -396,7 +402,7 @@ static int regcache_rbtree_sync(struct regmap *map, unsigned int min, map->cache_word_size); /* Is this the hardware default? If so skip. */ - ret = regcache_lookup_reg(map, i); + ret = regcache_lookup_reg(map, regtmp); if (ret >= 0 && val == map->reg_defaults[ret].def) continue; diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 87f54dbf601b..74b69095def6 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -346,6 +346,7 @@ out: return ret; } +EXPORT_SYMBOL_GPL(regcache_sync_region); /** * regcache_cache_only: Put a register map into cache only mode diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 58517a5dac13..251eb70f83e7 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -27,12 +27,6 @@ static size_t regmap_calc_reg_len(int max_val, char *buf, size_t buf_size) return strlen(buf); } -static int regmap_open_file(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t regmap_name_read_file(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -57,7 +51,7 @@ static ssize_t regmap_name_read_file(struct file *file, } static const struct file_operations regmap_name_fops = { - .open = regmap_open_file, + .open = simple_open, .read = regmap_name_read_file, .llseek = default_llseek, }; @@ -174,7 +168,7 @@ static ssize_t regmap_map_write_file(struct file *file, #endif static const struct file_operations regmap_map_fops = { - .open = regmap_open_file, + .open = simple_open, .read = regmap_map_read_file, .write = regmap_map_write_file, .llseek = default_llseek, @@ -243,7 +237,7 @@ out: } static const struct file_operations regmap_access_fops = { - .open = regmap_open_file, + .open = simple_open, .read = regmap_access_read_file, .llseek = default_llseek, }; diff --git a/drivers/base/soc.c b/drivers/base/soc.c index 05f150382da8..ba29b2e73d48 100644 --- a/drivers/base/soc.c +++ b/drivers/base/soc.c @@ -15,7 +15,7 @@ #include <linux/sys_soc.h> #include <linux/err.h> -static DEFINE_IDR(soc_ida); +static DEFINE_IDA(soc_ida); static DEFINE_SPINLOCK(soc_lock); static ssize_t soc_info_get(struct device *dev, @@ -168,8 +168,6 @@ void soc_device_unregister(struct soc_device *soc_dev) static int __init soc_bus_register(void) { - spin_lock_init(&soc_lock); - return bus_register(&soc_bus_type); } core_initcall(soc_bus_register); diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig index c1172dafdffa..fb7c80fb721e 100644 --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig @@ -29,7 +29,7 @@ config BCMA_HOST_PCI config BCMA_DRIVER_PCI_HOSTMODE bool "Driver for PCI core working in hostmode" - depends on BCMA && MIPS + depends on BCMA && MIPS && BCMA_HOST_PCI help PCI core hostmode operation (external PCI bus). diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index 4e20bcfa7ec5..d2097a11c3c7 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -10,6 +10,7 @@ */ #include "bcma_private.h" +#include <linux/pci.h> #include <linux/export.h> #include <linux/bcma/bcma.h> #include <asm/paccess.h> diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 76a08236430a..b0b00d70c166 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -1030,37 +1030,6 @@ static int fd_wait_for_completion(unsigned long delay, timeout_fn function) return 0; } -static DEFINE_SPINLOCK(floppy_hlt_lock); -static int hlt_disabled; -static void floppy_disable_hlt(void) -{ - unsigned long flags; - - WARN_ONCE(1, "floppy_disable_hlt() scheduled for removal in 2012"); - spin_lock_irqsave(&floppy_hlt_lock, flags); - if (!hlt_disabled) { - hlt_disabled = 1; -#ifdef HAVE_DISABLE_HLT - disable_hlt(); -#endif - } - spin_unlock_irqrestore(&floppy_hlt_lock, flags); -} - -static void floppy_enable_hlt(void) -{ - unsigned long flags; - - spin_lock_irqsave(&floppy_hlt_lock, flags); - if (hlt_disabled) { - hlt_disabled = 0; -#ifdef HAVE_DISABLE_HLT - enable_hlt(); -#endif - } - spin_unlock_irqrestore(&floppy_hlt_lock, flags); -} - static void setup_DMA(void) { unsigned long f; @@ -1105,7 +1074,6 @@ static void setup_DMA(void) fd_enable_dma(); release_dma_lock(f); #endif - floppy_disable_hlt(); } static void show_floppy(void); @@ -1707,7 +1675,6 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id) fd_disable_dma(); release_dma_lock(f); - floppy_enable_hlt(); do_floppy = NULL; if (fdc >= N_FDC || FDCS->address == -1) { /* we don't even know which FDC is the culprit */ @@ -1856,8 +1823,6 @@ static void floppy_shutdown(unsigned long data) show_floppy(); cancel_activity(); - floppy_enable_hlt(); - flags = claim_dma_lock(); fd_disable_dma(); release_dma_lock(flags); @@ -4508,7 +4473,6 @@ static void floppy_release_irq_and_dma(void) #if N_FDC > 1 set_dor(1, ~8, 0); #endif - floppy_enable_hlt(); if (floppy_track_buffer && max_buffer_sectors) { tmpsize = max_buffer_sectors * 1024; diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index d5e1ab956740..98cbeba8cd53 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1475,7 +1475,7 @@ static int __init xlblk_init(void) if (!xen_domain()) return -ENODEV; - if (!xen_platform_pci_unplug) + if (xen_hvm_domain() && !xen_platform_pci_unplug) return -ENODEV; if (register_blkdev(XENVBD_MAJOR, DEV_NAME)) { diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 48442476ec00..ae9edca7b56d 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -72,7 +72,9 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR3012 with sflash firmware*/ { USB_DEVICE(0x0CF3, 0x3004) }, + { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, + { USB_DEVICE(0x04CA, 0x3005) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -89,7 +91,9 @@ static struct usb_device_id ath3k_blist_tbl[] = { /* Atheros AR3012 with sflash firmware*/ { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c index 6c20bbb54b71..428dbb7574bd 100644 --- a/drivers/bluetooth/btmrvl_debugfs.c +++ b/drivers/bluetooth/btmrvl_debugfs.c @@ -45,12 +45,6 @@ struct btmrvl_debugfs_data { struct dentry *txdnldready; }; -static int btmrvl_open_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t btmrvl_hscfgcmd_write(struct file *file, const char __user *ubuf, size_t count, loff_t *ppos) { @@ -93,7 +87,7 @@ static ssize_t btmrvl_hscfgcmd_read(struct file *file, char __user *userbuf, static const struct file_operations btmrvl_hscfgcmd_fops = { .read = btmrvl_hscfgcmd_read, .write = btmrvl_hscfgcmd_write, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -134,7 +128,7 @@ static ssize_t btmrvl_psmode_read(struct file *file, char __user *userbuf, static const struct file_operations btmrvl_psmode_fops = { .read = btmrvl_psmode_read, .write = btmrvl_psmode_write, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -180,7 +174,7 @@ static ssize_t btmrvl_pscmd_read(struct file *file, char __user *userbuf, static const struct file_operations btmrvl_pscmd_fops = { .read = btmrvl_pscmd_read, .write = btmrvl_pscmd_write, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -221,7 +215,7 @@ static ssize_t btmrvl_gpiogap_read(struct file *file, char __user *userbuf, static const struct file_operations btmrvl_gpiogap_fops = { .read = btmrvl_gpiogap_read, .write = btmrvl_gpiogap_write, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -265,7 +259,7 @@ static ssize_t btmrvl_hscmd_read(struct file *file, char __user *userbuf, static const struct file_operations btmrvl_hscmd_fops = { .read = btmrvl_hscmd_read, .write = btmrvl_hscmd_write, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -305,7 +299,7 @@ static ssize_t btmrvl_hsmode_read(struct file *file, char __user * userbuf, static const struct file_operations btmrvl_hsmode_fops = { .read = btmrvl_hsmode_read, .write = btmrvl_hsmode_write, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -323,7 +317,7 @@ static ssize_t btmrvl_curpsmode_read(struct file *file, char __user *userbuf, static const struct file_operations btmrvl_curpsmode_fops = { .read = btmrvl_curpsmode_read, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -341,7 +335,7 @@ static ssize_t btmrvl_psstate_read(struct file *file, char __user * userbuf, static const struct file_operations btmrvl_psstate_fops = { .read = btmrvl_psstate_read, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -359,7 +353,7 @@ static ssize_t btmrvl_hsstate_read(struct file *file, char __user *userbuf, static const struct file_operations btmrvl_hsstate_fops = { .read = btmrvl_hsstate_read, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -378,7 +372,7 @@ static ssize_t btmrvl_txdnldready_read(struct file *file, char __user *userbuf, static const struct file_operations btmrvl_txdnldready_fops = { .read = btmrvl_txdnldready_read, - .open = btmrvl_open_generic, + .open = simple_open, .llseek = default_llseek, }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 480cad920048..3311b812a0c6 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -61,7 +61,7 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, /* Broadcom SoftSailing reporting vendor specific */ - { USB_DEVICE(0x05ac, 0x21e1) }, + { USB_DEVICE(0x0a5c, 0x21e1) }, /* Apple MacBookPro 7,1 */ { USB_DEVICE(0x05ac, 0x8213) }, @@ -103,6 +103,7 @@ static struct usb_device_id btusb_table[] = { /* Broadcom BCM20702A0 */ { USB_DEVICE(0x0a5c, 0x21e3) }, { USB_DEVICE(0x0a5c, 0x21e6) }, + { USB_DEVICE(0x0a5c, 0x21e8) }, { USB_DEVICE(0x0a5c, 0x21f3) }, { USB_DEVICE(0x413c, 0x8197) }, @@ -129,7 +130,9 @@ static struct usb_device_id blacklist_table[] = { /* Atheros 3012 with sflash firmware */ { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index fd5adb408f44..98a8c05d4f23 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -299,11 +299,11 @@ static void hci_uart_tty_close(struct tty_struct *tty) hci_uart_close(hdev); if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) { - hu->proto->close(hu); if (hdev) { hci_unregister_dev(hdev); hci_free_dev(hdev); } + hu->proto->close(hu); } kfree(hu); diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index 5da67f165afa..7ea18a5fe71c 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -234,6 +234,7 @@ #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_M_GT2_IG 0x0166 #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_HB 0x0158 /* Server */ #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT1_IG 0x015A +#define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG 0x016A int intel_gmch_probe(struct pci_dev *pdev, struct agp_bridge_data *bridge); diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 5cf47ac2d401..7f025fb620de 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1190,7 +1190,6 @@ static inline int needs_idle_maps(void) { #ifdef CONFIG_INTEL_IOMMU const unsigned short gpu_devid = intel_private.pcidev->device; - extern int intel_iommu_gfx_mapped; /* Query intel_iommu to see if we need the workaround. Presumably that * was loaded first. @@ -1459,6 +1458,8 @@ static const struct intel_gtt_driver_description { "Ivybridge", &sandybridge_gtt_driver }, { PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT1_IG, "Ivybridge", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG, + "Ivybridge", &sandybridge_gtt_driver }, { 0, NULL, NULL } }; diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index 57501ca9204b..46118f845948 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -301,7 +301,7 @@ apm_ioctl(struct file *filp, u_int cmd, u_long arg) * anything critical, chill a bit on each iteration. */ while (wait_event_freezable(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE)) + as->suspend_state != SUSPEND_ACKED)) msleep(10); break; case SUSPEND_ACKTO: diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 3845ab44c330..dfd7876f127c 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -906,8 +906,8 @@ int hpet_alloc(struct hpet_data *hdp) hpetp->hp_which, hdp->hd_phys_address, hpetp->hp_ntimer > 1 ? "s" : ""); for (i = 0; i < hpetp->hp_ntimer; i++) - printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]); - printk("\n"); + printk(KERN_CONT "%s %d", i > 0 ? "," : "", hdp->hd_irq[i]); + printk(KERN_CONT "\n"); temp = hpetp->hp_tick_freq; remainder = do_div(temp, 1000000); diff --git a/drivers/char/random.c b/drivers/char/random.c index 54ca8b23cde3..4ec04a754733 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1260,10 +1260,15 @@ static int proc_do_uuid(ctl_table *table, int write, uuid = table->data; if (!uuid) { uuid = tmp_uuid; - uuid[8] = 0; - } - if (uuid[8] == 0) generate_random_uuid(uuid); + } else { + static DEFINE_SPINLOCK(bootid_spinlock); + + spin_lock(&bootid_spinlock); + if (!uuid[8]) + generate_random_uuid(uuid); + spin_unlock(&bootid_spinlock); + } sprintf(buf, "%pU", uuid); diff --git a/drivers/char/tile-srom.c b/drivers/char/tile-srom.c index 4dc019408fac..3b22a606f79d 100644 --- a/drivers/char/tile-srom.c +++ b/drivers/char/tile-srom.c @@ -194,17 +194,17 @@ static ssize_t srom_read(struct file *filp, char __user *buf, hv_retval = _srom_read(srom->hv_devhdl, kernbuf, *f_pos, bytes_this_pass); - if (hv_retval > 0) { - if (copy_to_user(buf, kernbuf, hv_retval) != 0) { - retval = -EFAULT; - break; - } - } else if (hv_retval <= 0) { + if (hv_retval <= 0) { if (retval == 0) retval = hv_retval; break; } + if (copy_to_user(buf, kernbuf, hv_retval) != 0) { + retval = -EFAULT; + break; + } + retval += hv_retval; *f_pos += hv_retval; buf += hv_retval; diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index b58b56187065..ddf86b6500b7 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1038,12 +1038,6 @@ static struct attribute_group port_attribute_group = { .attrs = port_sysfs_entries, }; -static int debugfs_open(struct inode *inode, struct file *filp) -{ - filp->private_data = inode->i_private; - return 0; -} - static ssize_t debugfs_read(struct file *filp, char __user *ubuf, size_t count, loff_t *offp) { @@ -1087,7 +1081,7 @@ static ssize_t debugfs_read(struct file *filp, char __user *ubuf, static const struct file_operations port_debugfs_ops = { .owner = THIS_MODULE, - .open = debugfs_open, + .open = simple_open, .read = debugfs_read, }; diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 82e882028fcf..6b5cf02c35c8 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -23,7 +23,6 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/delay.h> -#include <linux/async.h> #include <asm/io.h> /* @@ -180,15 +179,17 @@ static int verify_pmtmr_rate(void) /* Number of reads we try to get two different values */ #define ACPI_PM_READ_CHECKS 10000 -static void __init acpi_pm_clocksource_async(void *unused, async_cookie_t cookie) +static int __init init_acpi_pm_clocksource(void) { cycle_t value1, value2; unsigned int i, j = 0; + if (!pmtmr_ioport) + return -ENODEV; /* "verify" this timing source: */ for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) { - usleep_range(100 * j, 100 * j + 100); + udelay(100 * j); value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm); for (i = 0; i < ACPI_PM_READ_CHECKS; i++) { value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm); @@ -202,34 +203,25 @@ static void __init acpi_pm_clocksource_async(void *unused, async_cookie_t cookie " 0x%#llx, 0x%#llx - aborting.\n", value1, value2); pmtmr_ioport = 0; - return; + return -EINVAL; } if (i == ACPI_PM_READ_CHECKS) { printk(KERN_INFO "PM-Timer failed consistency check " " (0x%#llx) - aborting.\n", value1); pmtmr_ioport = 0; - return; + return -ENODEV; } } if (verify_pmtmr_rate() != 0){ pmtmr_ioport = 0; - return; + return -ENODEV; } - clocksource_register_hz(&clocksource_acpi_pm, + return clocksource_register_hz(&clocksource_acpi_pm, PMTMR_TICKS_PER_SEC); } -static int __init init_acpi_pm_clocksource(void) -{ - if (!pmtmr_ioport) - return -ENODEV; - - async_schedule(acpi_pm_clocksource_async, NULL); - return 0; -} - /* We use fs_initcall because we want the PCI fixups to have run * but we still need to load before device_initcall */ diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 32d790dd8180..ffbb44685915 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -51,9 +51,6 @@ config ARM_S5PV210_CPUFREQ config ARM_EXYNOS_CPUFREQ bool "SAMSUNG EXYNOS SoCs" depends on ARCH_EXYNOS - select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210 - select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412) - select ARM_EXYNOS5250_CPUFREQ if SOC_EXYNOS5250 default y help This adds the CPUFreq driver common part for Samsung @@ -62,20 +59,19 @@ config ARM_EXYNOS_CPUFREQ If in doubt, say N. config ARM_EXYNOS4210_CPUFREQ - bool "Samsung EXYNOS4210" - depends on ARCH_EXYNOS + def_bool CPU_EXYNOS4210 help This adds the CPUFreq driver for Samsung EXYNOS4210 SoC (S5PV310 or S5PC210). config ARM_EXYNOS4X12_CPUFREQ - bool "Samsung EXYNOS4X12" + def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412) help This adds the CPUFreq driver for Samsung EXYNOS4X12 SoC (EXYNOS4212 or EXYNOS4412). config ARM_EXYNOS5250_CPUFREQ - bool "Samsung EXYNOS5250" + def_bool SOC_EXYNOS5250 help This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c index a22ffa5bff9f..0bf1b8910eeb 100644 --- a/drivers/cpufreq/db8500-cpufreq.c +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -142,7 +142,7 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */ /* policy sharing between dual CPUs */ - cpumask_copy(policy->cpus, &cpu_present_map); + cpumask_copy(policy->cpus, cpu_present_mask); policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 6588f43017bd..2f0083a51a9a 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -53,6 +53,55 @@ static void cpuidle_kick_cpus(void) {} static int __cpuidle_register_device(struct cpuidle_device *dev); +static inline int cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + struct cpuidle_state *target_state = &drv->states[index]; + return target_state->enter(dev, drv, index); +} + +static inline int cpuidle_enter_tk(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + return cpuidle_wrap_enter(dev, drv, index, cpuidle_enter); +} + +typedef int (*cpuidle_enter_t)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); + +static cpuidle_enter_t cpuidle_enter_ops; + +/** + * cpuidle_play_dead - cpu off-lining + * + * Returns in case of an error or no driver + */ +int cpuidle_play_dead(void) +{ + struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); + struct cpuidle_driver *drv = cpuidle_get_driver(); + int i, dead_state = -1; + int power_usage = -1; + + if (!drv) + return -ENODEV; + + /* Find lowest-power state that supports long-term idle */ + for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { + struct cpuidle_state *s = &drv->states[i]; + + if (s->power_usage < power_usage && s->enter_dead) { + power_usage = s->power_usage; + dead_state = i; + } + } + + if (dead_state != -1) + return drv->states[dead_state].enter_dead(dev, dead_state); + + return -ENODEV; +} + /** * cpuidle_idle_call - the main idle loop * @@ -63,7 +112,6 @@ int cpuidle_idle_call(void) { struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); struct cpuidle_driver *drv = cpuidle_get_driver(); - struct cpuidle_state *target_state; int next_state, entered_state; if (off) @@ -92,12 +140,10 @@ int cpuidle_idle_call(void) return 0; } - target_state = &drv->states[next_state]; - trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu); trace_cpu_idle_rcuidle(next_state, dev->cpu); - entered_state = target_state->enter(dev, drv, next_state); + entered_state = cpuidle_enter_ops(dev, drv, next_state); trace_power_end_rcuidle(dev->cpu); trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu); @@ -110,6 +156,8 @@ int cpuidle_idle_call(void) dev->states_usage[entered_state].time += (unsigned long long)dev->last_residency; dev->states_usage[entered_state].usage++; + } else { + dev->last_residency = 0; } /* give the governor an opportunity to reflect on the outcome */ @@ -164,6 +212,37 @@ void cpuidle_resume_and_unlock(void) EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock); +/** + * cpuidle_wrap_enter - performs timekeeping and irqen around enter function + * @dev: pointer to a valid cpuidle_device object + * @drv: pointer to a valid cpuidle_driver object + * @index: index of the target cpuidle state. + */ +int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)) +{ + ktime_t time_start, time_end; + s64 diff; + + time_start = ktime_get(); + + index = enter(dev, drv, index); + + time_end = ktime_get(); + + local_irq_enable(); + + diff = ktime_to_us(ktime_sub(time_end, time_start)); + if (diff > INT_MAX) + diff = INT_MAX; + + dev->last_residency = (int) diff; + + return index; +} + #ifdef CONFIG_ARCH_HAS_CPU_RELAX static int poll_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -197,6 +276,7 @@ static void poll_idle_init(struct cpuidle_driver *drv) state->power_usage = -1; state->flags = 0; state->enter = poll_idle; + state->disable = 0; } #else static void poll_idle_init(struct cpuidle_driver *drv) {} @@ -212,13 +292,14 @@ static void poll_idle_init(struct cpuidle_driver *drv) {} int cpuidle_enable_device(struct cpuidle_device *dev) { int ret, i; + struct cpuidle_driver *drv = cpuidle_get_driver(); if (dev->enabled) return 0; - if (!cpuidle_get_driver() || !cpuidle_curr_governor) + if (!drv || !cpuidle_curr_governor) return -EIO; if (!dev->state_count) - return -EINVAL; + dev->state_count = drv->state_count; if (dev->registered == 0) { ret = __cpuidle_register_device(dev); @@ -226,13 +307,16 @@ int cpuidle_enable_device(struct cpuidle_device *dev) return ret; } - poll_idle_init(cpuidle_get_driver()); + cpuidle_enter_ops = drv->en_core_tk_irqen ? + cpuidle_enter_tk : cpuidle_enter; + + poll_idle_init(drv); if ((ret = cpuidle_add_state_sysfs(dev))) return ret; if (cpuidle_curr_governor->enable && - (ret = cpuidle_curr_governor->enable(cpuidle_get_driver(), dev))) + (ret = cpuidle_curr_governor->enable(drv, dev))) goto fail_sysfs; for (i = 0; i < dev->state_count; i++) { diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 284d7af5a9c8..40cd3f3024df 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -47,7 +47,7 @@ static void __cpuidle_register_driver(struct cpuidle_driver *drv) */ int cpuidle_register_driver(struct cpuidle_driver *drv) { - if (!drv) + if (!drv || !drv->state_count) return -EINVAL; if (cpuidle_disabled()) diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index ad0952601ae2..06335756ea14 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -236,7 +236,7 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY); - unsigned int power_usage = -1; + int power_usage = -1; int i; int multiplier; struct timespec t; @@ -280,7 +280,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) * We want to default to C1 (hlt), not to busy polling * unless the timer is happening really really soon. */ - if (data->expected_us > 5) + if (data->expected_us > 5 && + drv->states[CPUIDLE_DRIVER_STATE_START].disable == 0) data->last_state_idx = CPUIDLE_DRIVER_STATE_START; /* @@ -290,6 +291,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { struct cpuidle_state *s = &drv->states[i]; + if (s->disable) + continue; if (s->target_residency > data->predicted_us) continue; if (s->exit_latency > latency_req) diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 3fe41fe4851a..88032b4dc6d2 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -11,6 +11,7 @@ #include <linux/sysfs.h> #include <linux/slab.h> #include <linux/cpu.h> +#include <linux/capability.h> #include "cpuidle.h" @@ -222,6 +223,9 @@ struct cpuidle_state_attr { #define define_one_state_ro(_name, show) \ static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0444, show, NULL) +#define define_one_state_rw(_name, show, store) \ +static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0644, show, store) + #define define_show_state_function(_name) \ static ssize_t show_state_##_name(struct cpuidle_state *state, \ struct cpuidle_state_usage *state_usage, char *buf) \ @@ -229,6 +233,24 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, \ return sprintf(buf, "%u\n", state->_name);\ } +#define define_store_state_function(_name) \ +static ssize_t store_state_##_name(struct cpuidle_state *state, \ + const char *buf, size_t size) \ +{ \ + long value; \ + int err; \ + if (!capable(CAP_SYS_ADMIN)) \ + return -EPERM; \ + err = kstrtol(buf, 0, &value); \ + if (err) \ + return err; \ + if (value) \ + state->disable = 1; \ + else \ + state->disable = 0; \ + return size; \ +} + #define define_show_state_ull_function(_name) \ static ssize_t show_state_##_name(struct cpuidle_state *state, \ struct cpuidle_state_usage *state_usage, char *buf) \ @@ -251,6 +273,8 @@ define_show_state_ull_function(usage) define_show_state_ull_function(time) define_show_state_str_function(name) define_show_state_str_function(desc) +define_show_state_function(disable) +define_store_state_function(disable) define_one_state_ro(name, show_state_name); define_one_state_ro(desc, show_state_desc); @@ -258,6 +282,7 @@ define_one_state_ro(latency, show_state_exit_latency); define_one_state_ro(power, show_state_power_usage); define_one_state_ro(usage, show_state_usage); define_one_state_ro(time, show_state_time); +define_one_state_rw(disable, show_state_disable, store_state_disable); static struct attribute *cpuidle_state_default_attrs[] = { &attr_name.attr, @@ -266,6 +291,7 @@ static struct attribute *cpuidle_state_default_attrs[] = { &attr_power.attr, &attr_usage.attr, &attr_time.attr, + &attr_disable.attr, NULL }; @@ -287,8 +313,22 @@ static ssize_t cpuidle_state_show(struct kobject * kobj, return ret; } +static ssize_t cpuidle_state_store(struct kobject *kobj, + struct attribute *attr, const char *buf, size_t size) +{ + int ret = -EIO; + struct cpuidle_state *state = kobj_to_state(kobj); + struct cpuidle_state_attr *cattr = attr_to_stateattr(attr); + + if (cattr->store) + ret = cattr->store(state, buf, size); + + return ret; +} + static const struct sysfs_ops cpuidle_state_sysfs_ops = { .show = cpuidle_state_show, + .store = cpuidle_state_store, }; static void cpuidle_state_sysfs_release(struct kobject *kobj) diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index dc89455f5550..750925f9638b 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -104,13 +104,6 @@ static void coh901318_list_print(struct coh901318_chan *cohc, static struct coh901318_base *debugfs_dma_base; static struct dentry *dma_dentry; -static int coh901318_debugfs_open(struct inode *inode, struct file *file) -{ - - file->private_data = inode->i_private; - return 0; -} - static int coh901318_debugfs_read(struct file *file, char __user *buf, size_t count, loff_t *f_pos) { @@ -158,7 +151,7 @@ static int coh901318_debugfs_read(struct file *file, char __user *buf, static const struct file_operations coh901318_debugfs_status_operations = { .owner = THIS_MODULE, - .open = coh901318_debugfs_open, + .open = simple_open, .read = coh901318_debugfs_read, .llseek = default_llseek, }; diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 767bcc31b365..2397f6f451b1 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -332,6 +332,20 @@ struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) } EXPORT_SYMBOL(dma_find_channel); +/* + * net_dma_find_channel - find a channel for net_dma + * net_dma has alignment requirements + */ +struct dma_chan *net_dma_find_channel(void) +{ + struct dma_chan *chan = dma_find_channel(DMA_MEMCPY); + if (chan && !is_dma_copy_aligned(chan->device, 1, 1, 1)) + return NULL; + + return chan; +} +EXPORT_SYMBOL(net_dma_find_channel); + /** * dma_issue_pending_all - flush all pending operations across all channels */ diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index 31493d80e0e9..73b2b65cb1de 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -546,9 +546,9 @@ void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags, PCI_DMA_TODEVICE, flags, 0); } -unsigned long ioat_get_current_completion(struct ioat_chan_common *chan) +dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan) { - unsigned long phys_complete; + dma_addr_t phys_complete; u64 completion; completion = *chan->completion; @@ -569,7 +569,7 @@ unsigned long ioat_get_current_completion(struct ioat_chan_common *chan) } bool ioat_cleanup_preamble(struct ioat_chan_common *chan, - unsigned long *phys_complete) + dma_addr_t *phys_complete) { *phys_complete = ioat_get_current_completion(chan); if (*phys_complete == chan->last_completion) @@ -580,14 +580,14 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan, return true; } -static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete) +static void __cleanup(struct ioat_dma_chan *ioat, dma_addr_t phys_complete) { struct ioat_chan_common *chan = &ioat->base; struct list_head *_desc, *n; struct dma_async_tx_descriptor *tx; - dev_dbg(to_dev(chan), "%s: phys_complete: %lx\n", - __func__, phys_complete); + dev_dbg(to_dev(chan), "%s: phys_complete: %llx\n", + __func__, (unsigned long long) phys_complete); list_for_each_safe(_desc, n, &ioat->used_desc) { struct ioat_desc_sw *desc; @@ -652,7 +652,7 @@ static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete) static void ioat1_cleanup(struct ioat_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; prefetch(chan->completion); @@ -698,7 +698,7 @@ static void ioat1_timer_event(unsigned long data) mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT); spin_unlock_bh(&ioat->desc_lock); } else if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) { - unsigned long phys_complete; + dma_addr_t phys_complete; spin_lock_bh(&ioat->desc_lock); /* if we haven't made progress and we have already diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index c7888bccd974..5e8fe01ba69d 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -88,7 +88,7 @@ struct ioatdma_device { struct ioat_chan_common { struct dma_chan common; void __iomem *reg_base; - unsigned long last_completion; + dma_addr_t last_completion; spinlock_t cleanup_lock; unsigned long state; #define IOAT_COMPLETION_PENDING 0 @@ -310,7 +310,7 @@ int __devinit ioat_dma_self_test(struct ioatdma_device *device); void __devexit ioat_dma_remove(struct ioatdma_device *device); struct dca_provider * __devinit ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase); -unsigned long ioat_get_current_completion(struct ioat_chan_common *chan); +dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan); void ioat_init_channel(struct ioatdma_device *device, struct ioat_chan_common *chan, int idx); enum dma_status ioat_dma_tx_status(struct dma_chan *c, dma_cookie_t cookie, @@ -318,7 +318,7 @@ enum dma_status ioat_dma_tx_status(struct dma_chan *c, dma_cookie_t cookie, void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags, size_t len, struct ioat_dma_descriptor *hw); bool ioat_cleanup_preamble(struct ioat_chan_common *chan, - unsigned long *phys_complete); + dma_addr_t *phys_complete); void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type); void ioat_kobject_del(struct ioatdma_device *device); extern const struct sysfs_ops ioat_sysfs_ops; diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index e8e110ff3d96..86895760b598 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -128,7 +128,7 @@ static void ioat2_start_null_desc(struct ioat2_dma_chan *ioat) spin_unlock_bh(&ioat->prep_lock); } -static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) +static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) { struct ioat_chan_common *chan = &ioat->base; struct dma_async_tx_descriptor *tx; @@ -179,7 +179,7 @@ static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) static void ioat2_cleanup(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; spin_lock_bh(&chan->cleanup_lock); if (ioat_cleanup_preamble(chan, &phys_complete)) @@ -260,7 +260,7 @@ int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo) static void ioat2_restart_channel(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; ioat2_quiesce(chan, 0); if (ioat_cleanup_preamble(chan, &phys_complete)) @@ -275,7 +275,7 @@ void ioat2_timer_event(unsigned long data) struct ioat_chan_common *chan = &ioat->base; if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) { - unsigned long phys_complete; + dma_addr_t phys_complete; u64 status; status = ioat_chansts(chan); @@ -572,9 +572,9 @@ bool reshape_ring(struct ioat2_dma_chan *ioat, int order) */ struct ioat_chan_common *chan = &ioat->base; struct dma_chan *c = &chan->common; - const u16 curr_size = ioat2_ring_size(ioat); + const u32 curr_size = ioat2_ring_size(ioat); const u16 active = ioat2_ring_active(ioat); - const u16 new_size = 1 << order; + const u32 new_size = 1 << order; struct ioat_ring_ent **ring; u16 i; diff --git a/drivers/dma/ioat/dma_v2.h b/drivers/dma/ioat/dma_v2.h index a2c413b2b8d8..be2a55b95c23 100644 --- a/drivers/dma/ioat/dma_v2.h +++ b/drivers/dma/ioat/dma_v2.h @@ -74,7 +74,7 @@ static inline struct ioat2_dma_chan *to_ioat2_chan(struct dma_chan *c) return container_of(chan, struct ioat2_dma_chan, base); } -static inline u16 ioat2_ring_size(struct ioat2_dma_chan *ioat) +static inline u32 ioat2_ring_size(struct ioat2_dma_chan *ioat) { return 1 << ioat->alloc_order; } @@ -91,7 +91,7 @@ static inline u16 ioat2_ring_pending(struct ioat2_dma_chan *ioat) return CIRC_CNT(ioat->head, ioat->issued, ioat2_ring_size(ioat)); } -static inline u16 ioat2_ring_space(struct ioat2_dma_chan *ioat) +static inline u32 ioat2_ring_space(struct ioat2_dma_chan *ioat) { return ioat2_ring_size(ioat) - ioat2_ring_active(ioat); } diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 2c4476c0e405..f7f1dc62c15c 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -257,7 +257,7 @@ static bool desc_has_ext(struct ioat_ring_ent *desc) * The difference from the dma_v2.c __cleanup() is that this routine * handles extended descriptors and dma-unmapping raid operations. */ -static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) +static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) { struct ioat_chan_common *chan = &ioat->base; struct ioat_ring_ent *desc; @@ -314,7 +314,7 @@ static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) static void ioat3_cleanup(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; spin_lock_bh(&chan->cleanup_lock); if (ioat_cleanup_preamble(chan, &phys_complete)) @@ -333,7 +333,7 @@ static void ioat3_cleanup_event(unsigned long data) static void ioat3_restart_channel(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; ioat2_quiesce(chan, 0); if (ioat_cleanup_preamble(chan, &phys_complete)) @@ -348,7 +348,7 @@ static void ioat3_timer_event(unsigned long data) struct ioat_chan_common *chan = &ioat->base; if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) { - unsigned long phys_complete; + dma_addr_t phys_complete; u64 status; status = ioat_chansts(chan); @@ -1149,6 +1149,44 @@ static int ioat3_reset_hw(struct ioat_chan_common *chan) return ioat2_reset_sync(chan, msecs_to_jiffies(200)); } +static bool is_jf_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_JSF0: + case PCI_DEVICE_ID_INTEL_IOAT_JSF1: + case PCI_DEVICE_ID_INTEL_IOAT_JSF2: + case PCI_DEVICE_ID_INTEL_IOAT_JSF3: + case PCI_DEVICE_ID_INTEL_IOAT_JSF4: + case PCI_DEVICE_ID_INTEL_IOAT_JSF5: + case PCI_DEVICE_ID_INTEL_IOAT_JSF6: + case PCI_DEVICE_ID_INTEL_IOAT_JSF7: + case PCI_DEVICE_ID_INTEL_IOAT_JSF8: + case PCI_DEVICE_ID_INTEL_IOAT_JSF9: + return true; + default: + return false; + } +} + +static bool is_snb_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_SNB0: + case PCI_DEVICE_ID_INTEL_IOAT_SNB1: + case PCI_DEVICE_ID_INTEL_IOAT_SNB2: + case PCI_DEVICE_ID_INTEL_IOAT_SNB3: + case PCI_DEVICE_ID_INTEL_IOAT_SNB4: + case PCI_DEVICE_ID_INTEL_IOAT_SNB5: + case PCI_DEVICE_ID_INTEL_IOAT_SNB6: + case PCI_DEVICE_ID_INTEL_IOAT_SNB7: + case PCI_DEVICE_ID_INTEL_IOAT_SNB8: + case PCI_DEVICE_ID_INTEL_IOAT_SNB9: + return true; + default: + return false; + } +} + int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; @@ -1169,6 +1207,9 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_alloc_chan_resources = ioat2_alloc_chan_resources; dma->device_free_chan_resources = ioat2_free_chan_resources; + if (is_jf_ioat(pdev) || is_snb_ioat(pdev)) + dma->copy_align = 6; + dma_cap_set(DMA_INTERRUPT, dma->cap_mask); dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock; diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index da6c4c2c066a..79e3eba29702 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -1252,8 +1252,8 @@ iop_adma_pq_zero_sum_self_test(struct iop_adma_device *device) struct page **pq_hw = &pq[IOP_ADMA_NUM_SRC_TEST+2]; /* address conversion buffers (dma_map / page_address) */ void *pq_sw[IOP_ADMA_NUM_SRC_TEST+2]; - dma_addr_t pq_src[IOP_ADMA_NUM_SRC_TEST]; - dma_addr_t pq_dest[2]; + dma_addr_t pq_src[IOP_ADMA_NUM_SRC_TEST+2]; + dma_addr_t *pq_dest = &pq_src[IOP_ADMA_NUM_SRC_TEST]; int i; struct dma_async_tx_descriptor *tx; diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 65334c49b71e..c81ef7e10e08 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -22,10 +22,10 @@ #include <linux/platform_device.h> #include <linux/dmaengine.h> #include <linux/delay.h> +#include <linux/fsl/mxs-dma.h> #include <asm/irq.h> #include <mach/mxs.h> -#include <mach/dma.h> #include <mach/common.h> #include "dmaengine.h" @@ -337,10 +337,32 @@ static void mxs_dma_free_chan_resources(struct dma_chan *chan) clk_disable_unprepare(mxs_dma->clk); } +/* + * How to use the flags for ->device_prep_slave_sg() : + * [1] If there is only one DMA command in the DMA chain, the code should be: + * ...... + * ->device_prep_slave_sg(DMA_CTRL_ACK); + * ...... + * [2] If there are two DMA commands in the DMA chain, the code should be + * ...... + * ->device_prep_slave_sg(0); + * ...... + * ->device_prep_slave_sg(DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + * ...... + * [3] If there are more than two DMA commands in the DMA chain, the code + * should be: + * ...... + * ->device_prep_slave_sg(0); // First + * ...... + * ->device_prep_slave_sg(DMA_PREP_INTERRUPT [| DMA_CTRL_ACK]); + * ...... + * ->device_prep_slave_sg(DMA_PREP_INTERRUPT | DMA_CTRL_ACK); // Last + * ...... + */ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long append, void *context) + unsigned long flags, void *context) { struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; @@ -348,6 +370,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( struct scatterlist *sg; int i, j; u32 *pio; + bool append = flags & DMA_PREP_INTERRUPT; int idx = append ? mxs_chan->desc_count : 0; if (mxs_chan->status == DMA_IN_PROGRESS && !append) @@ -374,7 +397,6 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits |= CCW_CHAIN; ccw->bits &= ~CCW_IRQ; ccw->bits &= ~CCW_DEC_SEM; - ccw->bits &= ~CCW_WAIT4END; } else { idx = 0; } @@ -389,7 +411,8 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits = 0; ccw->bits |= CCW_IRQ; ccw->bits |= CCW_DEC_SEM; - ccw->bits |= CCW_WAIT4END; + if (flags & DMA_CTRL_ACK) + ccw->bits |= CCW_WAIT4END; ccw->bits |= CCW_HALT_ON_TERM; ccw->bits |= CCW_TERM_FLUSH; ccw->bits |= BF_CCW(sg_len, PIO_NUM); @@ -420,7 +443,8 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits &= ~CCW_CHAIN; ccw->bits |= CCW_IRQ; ccw->bits |= CCW_DEC_SEM; - ccw->bits |= CCW_WAIT4END; + if (flags & DMA_CTRL_ACK) + ccw->bits |= CCW_WAIT4END; } } } diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c index 16a6b48883cf..ec78ccef9132 100644 --- a/drivers/dma/sa11x0-dma.c +++ b/drivers/dma/sa11x0-dma.c @@ -585,7 +585,7 @@ static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx) static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen, - enum dma_transfer_direction dir, unsigned long flags) + enum dma_transfer_direction dir, unsigned long flags, void *context) { struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); struct sa11x0_dma_desc *txd; diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c index 36e1486eb9aa..d0c372e30de4 100644 --- a/drivers/edac/mce_amd.c +++ b/drivers/edac/mce_amd.c @@ -754,9 +754,7 @@ static int __init mce_amd_init(void) if (c->x86_vendor != X86_VENDOR_AMD) return 0; - if ((c->x86 < 0xf || c->x86 > 0x12) && - (c->x86 != 0x14 || c->x86_model > 0xf) && - (c->x86 != 0x15 || c->x86_model > 0xf)) + if (c->x86 < 0xf || c->x86 > 0x15) return 0; fam_ops = kzalloc(sizeof(struct amd_decoder_ops), GFP_KERNEL); @@ -797,7 +795,7 @@ static int __init mce_amd_init(void) break; default: - printk(KERN_WARNING "Huh? What family is that: %d?!\n", c->x86); + printk(KERN_WARNING "Huh? What family is it: 0x%x?!\n", c->x86); kfree(fam_ops); return -EINVAL; } diff --git a/drivers/edac/tile_edac.c b/drivers/edac/tile_edac.c index 1d5cf06f6c6b..e99d00976189 100644 --- a/drivers/edac/tile_edac.c +++ b/drivers/edac/tile_edac.c @@ -145,7 +145,11 @@ static int __devinit tile_edac_mc_probe(struct platform_device *pdev) mci->edac_ctl_cap = EDAC_FLAG_SECDED; mci->mod_name = DRV_NAME; +#ifdef __tilegx__ + mci->ctl_name = "TILEGx_Memory_Controller"; +#else mci->ctl_name = "TILEPro_Memory_Controller"; +#endif mci->dev_name = dev_name(&pdev->dev); mci->edac_check = tile_edac_check; diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 32de6707e3c4..12f349b3830d 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -22,7 +22,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/gpio.h> -#include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/module.h> #include <linux/irqdomain.h> @@ -37,7 +37,8 @@ #define GPIO_PORT(x) (((x) >> 3) & 0x3) #define GPIO_BIT(x) ((x) & 0x7) -#define GPIO_REG(x) (GPIO_BANK(x) * 0x80 + GPIO_PORT(x) * 4) +#define GPIO_REG(x) (GPIO_BANK(x) * tegra_gpio_bank_stride + \ + GPIO_PORT(x) * 4) #define GPIO_CNF(x) (GPIO_REG(x) + 0x00) #define GPIO_OE(x) (GPIO_REG(x) + 0x10) @@ -48,12 +49,12 @@ #define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60) #define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70) -#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800) -#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810) -#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820) -#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840) -#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850) -#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860) +#define GPIO_MSK_CNF(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x00) +#define GPIO_MSK_OE(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x10) +#define GPIO_MSK_OUT(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0X20) +#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x40) +#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x50) +#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x60) #define GPIO_INT_LVL_MASK 0x010101 #define GPIO_INT_LVL_EDGE_RISING 0x000101 @@ -78,6 +79,8 @@ struct tegra_gpio_bank { static struct irq_domain *irq_domain; static void __iomem *regs; static u32 tegra_gpio_bank_count; +static u32 tegra_gpio_bank_stride; +static u32 tegra_gpio_upper_offset; static struct tegra_gpio_bank *tegra_gpio_banks; static inline void tegra_gpio_writel(u32 val, u32 reg) @@ -333,6 +336,26 @@ static struct irq_chip tegra_gpio_irq_chip = { #endif }; +struct tegra_gpio_soc_config { + u32 bank_stride; + u32 upper_offset; +}; + +static struct tegra_gpio_soc_config tegra20_gpio_config = { + .bank_stride = 0x80, + .upper_offset = 0x800, +}; + +static struct tegra_gpio_soc_config tegra30_gpio_config = { + .bank_stride = 0x100, + .upper_offset = 0x80, +}; + +static struct of_device_id tegra_gpio_of_match[] __devinitdata = { + { .compatible = "nvidia,tegra30-gpio", .data = &tegra30_gpio_config }, + { .compatible = "nvidia,tegra20-gpio", .data = &tegra20_gpio_config }, + { }, +}; /* This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. @@ -341,6 +364,8 @@ static struct lock_class_key gpio_lock_class; static int __devinit tegra_gpio_probe(struct platform_device *pdev) { + const struct of_device_id *match; + struct tegra_gpio_soc_config *config; int irq_base; struct resource *res; struct tegra_gpio_bank *bank; @@ -348,6 +373,15 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) int i; int j; + match = of_match_device(tegra_gpio_of_match, &pdev->dev); + if (match) + config = (struct tegra_gpio_soc_config *)match->data; + else + config = &tegra20_gpio_config; + + tegra_gpio_bank_stride = config->bank_stride; + tegra_gpio_upper_offset = config->upper_offset; + for (;;) { res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count); if (!res) @@ -402,7 +436,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) return -ENODEV; } - for (i = 0; i < 7; i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { for (j = 0; j < 4; j++) { int gpio = tegra_gpio_compose(i, j, 0); tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio)); @@ -441,11 +475,6 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) return 0; } -static struct of_device_id tegra_gpio_of_match[] __devinitdata = { - { .compatible = "nvidia,tegra20-gpio", }, - { }, -}; - static struct platform_driver tegra_gpio_driver = { .driver = { .name = "tegra-gpio", @@ -485,7 +514,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) int i; int j; - for (i = 0; i < 7; i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { for (j = 0; j < 4; j++) { int gpio = tegra_gpio_compose(i, j, 0); seq_printf(s, diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index cc1148837e24..e354bc0b052a 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -9,6 +9,7 @@ menuconfig DRM depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU select I2C select I2C_ALGOBIT + select DMA_SHARED_BUFFER help Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index a858532806ae..c20da5bda355 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -12,7 +12,7 @@ drm-y := drm_auth.o drm_buffer.o drm_bufs.o drm_cache.o \ drm_platform.o drm_sysfs.o drm_hashtab.o drm_mm.o \ drm_crtc.o drm_modes.o drm_edid.o \ drm_info.o drm_debugfs.o drm_encoder_slave.o \ - drm_trace_points.o drm_global.o + drm_trace_points.o drm_global.o drm_prime.o drm-$(CONFIG_COMPAT) += drm_ioc32.o diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 0b65fbc8a630..6116e3b75393 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -136,6 +136,10 @@ static struct drm_ioctl_desc drm_ioctls[] = { DRM_IOCTL_DEF(DRM_IOCTL_GEM_OPEN, drm_gem_open_ioctl, DRM_AUTH|DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETRESOURCES, drm_mode_getresources, DRM_CONTROL_ALLOW|DRM_UNLOCKED), + + DRM_IOCTL_DEF(DRM_IOCTL_PRIME_HANDLE_TO_FD, drm_prime_handle_to_fd_ioctl, DRM_AUTH|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_PRIME_FD_TO_HANDLE, drm_prime_fd_to_handle_ioctl, DRM_AUTH|DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANERESOURCES, drm_mode_getplane_res, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCRTC, drm_mode_getcrtc, DRM_CONTROL_ALLOW|DRM_UNLOCKED), DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETCRTC, drm_mode_setcrtc, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 7740dd26f007..a0d6e894d97c 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -559,9 +559,13 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, return -EINVAL; /* Need to resize the fb object !!! */ - if (var->bits_per_pixel > fb->bits_per_pixel || var->xres > fb->width || var->yres > fb->height) { + if (var->bits_per_pixel > fb->bits_per_pixel || + var->xres > fb->width || var->yres > fb->height || + var->xres_virtual > fb->width || var->yres_virtual > fb->height) { DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb " - "object %dx%d-%d > %dx%d-%d\n", var->xres, var->yres, var->bits_per_pixel, + "request %dx%d-%d (virtual %dx%d) > %dx%d-%d\n", + var->xres, var->yres, var->bits_per_pixel, + var->xres_virtual, var->yres_virtual, fb->width, fb->height, fb->bits_per_pixel); return -EINVAL; } diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index 7348a3dab250..cdfbf27b2b3c 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -271,6 +271,9 @@ static int drm_open_helper(struct inode *inode, struct file *filp, if (dev->driver->driver_features & DRIVER_GEM) drm_gem_open(dev, priv); + if (drm_core_check_feature(dev, DRIVER_PRIME)) + drm_prime_init_file_private(&priv->prime); + if (dev->driver->open) { ret = dev->driver->open(dev, priv); if (ret < 0) @@ -571,6 +574,10 @@ int drm_release(struct inode *inode, struct file *filp) if (dev->driver->postclose) dev->driver->postclose(dev, file_priv); + + if (drm_core_check_feature(dev, DRIVER_PRIME)) + drm_prime_destroy_file_private(&file_priv->prime); + kfree(file_priv); /* ======================================================== diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 0ef358e53245..83114b5e3cee 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -35,6 +35,7 @@ #include <linux/mman.h> #include <linux/pagemap.h> #include <linux/shmem_fs.h> +#include <linux/dma-buf.h> #include "drmP.h" /** @file drm_gem.c @@ -232,6 +233,10 @@ drm_gem_handle_delete(struct drm_file *filp, u32 handle) idr_remove(&filp->object_idr, handle); spin_unlock(&filp->table_lock); + if (obj->import_attach) + drm_prime_remove_imported_buf_handle(&filp->prime, + obj->import_attach->dmabuf); + if (dev->driver->gem_close_object) dev->driver->gem_close_object(obj, filp); drm_gem_object_handle_unreference_unlocked(obj); @@ -527,6 +532,10 @@ drm_gem_object_release_handle(int id, void *ptr, void *data) struct drm_gem_object *obj = ptr; struct drm_device *dev = obj->dev; + if (obj->import_attach) + drm_prime_remove_imported_buf_handle(&file_priv->prime, + obj->import_attach->dmabuf); + if (dev->driver->gem_close_object) dev->driver->gem_close_object(obj, file_priv); diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c new file mode 100644 index 000000000000..1bdf2b54eaf6 --- /dev/null +++ b/drivers/gpu/drm/drm_prime.c @@ -0,0 +1,304 @@ +/* + * Copyright © 2012 Red Hat + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Dave Airlie <airlied@redhat.com> + * Rob Clark <rob.clark@linaro.org> + * + */ + +#include <linux/export.h> +#include <linux/dma-buf.h> +#include "drmP.h" + +/* + * DMA-BUF/GEM Object references and lifetime overview: + * + * On the export the dma_buf holds a reference to the exporting GEM + * object. It takes this reference in handle_to_fd_ioctl, when it + * first calls .prime_export and stores the exporting GEM object in + * the dma_buf priv. This reference is released when the dma_buf + * object goes away in the driver .release function. + * + * On the import the importing GEM object holds a reference to the + * dma_buf (which in turn holds a ref to the exporting GEM object). + * It takes that reference in the fd_to_handle ioctl. + * It calls dma_buf_get, creates an attachment to it and stores the + * attachment in the GEM object. When this attachment is destroyed + * when the imported object is destroyed, we remove the attachment + * and drop the reference to the dma_buf. + * + * Thus the chain of references always flows in one direction + * (avoiding loops): importing_gem -> dmabuf -> exporting_gem + * + * Self-importing: if userspace is using PRIME as a replacement for flink + * then it will get a fd->handle request for a GEM object that it created. + * Drivers should detect this situation and return back the gem object + * from the dma-buf private. + */ + +struct drm_prime_member { + struct list_head entry; + struct dma_buf *dma_buf; + uint32_t handle; +}; + +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd) +{ + struct drm_gem_object *obj; + void *buf; + + obj = drm_gem_object_lookup(dev, file_priv, handle); + if (!obj) + return -ENOENT; + + mutex_lock(&file_priv->prime.lock); + /* re-export the original imported object */ + if (obj->import_attach) { + get_dma_buf(obj->import_attach->dmabuf); + *prime_fd = dma_buf_fd(obj->import_attach->dmabuf, flags); + drm_gem_object_unreference_unlocked(obj); + mutex_unlock(&file_priv->prime.lock); + return 0; + } + + if (obj->export_dma_buf) { + get_dma_buf(obj->export_dma_buf); + *prime_fd = dma_buf_fd(obj->export_dma_buf, flags); + drm_gem_object_unreference_unlocked(obj); + } else { + buf = dev->driver->gem_prime_export(dev, obj, flags); + if (IS_ERR(buf)) { + /* normally the created dma-buf takes ownership of the ref, + * but if that fails then drop the ref + */ + drm_gem_object_unreference_unlocked(obj); + mutex_unlock(&file_priv->prime.lock); + return PTR_ERR(buf); + } + obj->export_dma_buf = buf; + *prime_fd = dma_buf_fd(buf, flags); + } + mutex_unlock(&file_priv->prime.lock); + return 0; +} +EXPORT_SYMBOL(drm_gem_prime_handle_to_fd); + +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle) +{ + struct dma_buf *dma_buf; + struct drm_gem_object *obj; + int ret; + + dma_buf = dma_buf_get(prime_fd); + if (IS_ERR(dma_buf)) + return PTR_ERR(dma_buf); + + mutex_lock(&file_priv->prime.lock); + + ret = drm_prime_lookup_imported_buf_handle(&file_priv->prime, + dma_buf, handle); + if (!ret) { + ret = 0; + goto out_put; + } + + /* never seen this one, need to import */ + obj = dev->driver->gem_prime_import(dev, dma_buf); + if (IS_ERR(obj)) { + ret = PTR_ERR(obj); + goto out_put; + } + + ret = drm_gem_handle_create(file_priv, obj, handle); + drm_gem_object_unreference_unlocked(obj); + if (ret) + goto out_put; + + ret = drm_prime_add_imported_buf_handle(&file_priv->prime, + dma_buf, *handle); + if (ret) + goto fail; + + mutex_unlock(&file_priv->prime.lock); + return 0; + +fail: + /* hmm, if driver attached, we are relying on the free-object path + * to detach.. which seems ok.. + */ + drm_gem_object_handle_unreference_unlocked(obj); +out_put: + dma_buf_put(dma_buf); + mutex_unlock(&file_priv->prime.lock); + return ret; +} +EXPORT_SYMBOL(drm_gem_prime_fd_to_handle); + +int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_prime_handle *args = data; + uint32_t flags; + + if (!drm_core_check_feature(dev, DRIVER_PRIME)) + return -EINVAL; + + if (!dev->driver->prime_handle_to_fd) + return -ENOSYS; + + /* check flags are valid */ + if (args->flags & ~DRM_CLOEXEC) + return -EINVAL; + + /* we only want to pass DRM_CLOEXEC which is == O_CLOEXEC */ + flags = args->flags & DRM_CLOEXEC; + + return dev->driver->prime_handle_to_fd(dev, file_priv, + args->handle, flags, &args->fd); +} + +int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_prime_handle *args = data; + + if (!drm_core_check_feature(dev, DRIVER_PRIME)) + return -EINVAL; + + if (!dev->driver->prime_fd_to_handle) + return -ENOSYS; + + return dev->driver->prime_fd_to_handle(dev, file_priv, + args->fd, &args->handle); +} + +/* + * drm_prime_pages_to_sg + * + * this helper creates an sg table object from a set of pages + * the driver is responsible for mapping the pages into the + * importers address space + */ +struct sg_table *drm_prime_pages_to_sg(struct page **pages, int nr_pages) +{ + struct sg_table *sg = NULL; + struct scatterlist *iter; + int i; + int ret; + + sg = kmalloc(sizeof(struct sg_table), GFP_KERNEL); + if (!sg) + goto out; + + ret = sg_alloc_table(sg, nr_pages, GFP_KERNEL); + if (ret) + goto out; + + for_each_sg(sg->sgl, iter, nr_pages, i) + sg_set_page(iter, pages[i], PAGE_SIZE, 0); + + return sg; +out: + kfree(sg); + return NULL; +} +EXPORT_SYMBOL(drm_prime_pages_to_sg); + +/* helper function to cleanup a GEM/prime object */ +void drm_prime_gem_destroy(struct drm_gem_object *obj, struct sg_table *sg) +{ + struct dma_buf_attachment *attach; + struct dma_buf *dma_buf; + attach = obj->import_attach; + if (sg) + dma_buf_unmap_attachment(attach, sg, DMA_BIDIRECTIONAL); + dma_buf = attach->dmabuf; + dma_buf_detach(attach->dmabuf, attach); + /* remove the reference */ + dma_buf_put(dma_buf); +} +EXPORT_SYMBOL(drm_prime_gem_destroy); + +void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv) +{ + INIT_LIST_HEAD(&prime_fpriv->head); + mutex_init(&prime_fpriv->lock); +} +EXPORT_SYMBOL(drm_prime_init_file_private); + +void drm_prime_destroy_file_private(struct drm_prime_file_private *prime_fpriv) +{ + struct drm_prime_member *member, *safe; + list_for_each_entry_safe(member, safe, &prime_fpriv->head, entry) { + list_del(&member->entry); + kfree(member); + } +} +EXPORT_SYMBOL(drm_prime_destroy_file_private); + +int drm_prime_add_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf, uint32_t handle) +{ + struct drm_prime_member *member; + + member = kmalloc(sizeof(*member), GFP_KERNEL); + if (!member) + return -ENOMEM; + + member->dma_buf = dma_buf; + member->handle = handle; + list_add(&member->entry, &prime_fpriv->head); + return 0; +} +EXPORT_SYMBOL(drm_prime_add_imported_buf_handle); + +int drm_prime_lookup_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf, uint32_t *handle) +{ + struct drm_prime_member *member; + + list_for_each_entry(member, &prime_fpriv->head, entry) { + if (member->dma_buf == dma_buf) { + *handle = member->handle; + return 0; + } + } + return -ENOENT; +} +EXPORT_SYMBOL(drm_prime_lookup_imported_buf_handle); + +void drm_prime_remove_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf) +{ + struct drm_prime_member *member, *safe; + + mutex_lock(&prime_fpriv->lock); + list_for_each_entry_safe(member, safe, &prime_fpriv->head, entry) { + if (member->dma_buf == dma_buf) { + list_del(&member->entry); + kfree(member); + } + } + mutex_unlock(&prime_fpriv->lock); +} +EXPORT_SYMBOL(drm_prime_remove_imported_buf_handle); diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c index 4a3a5f72ed4a..de8d2090bce3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c @@ -34,14 +34,14 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, unsigned int flags, struct exynos_drm_gem_buf *buf) { - dma_addr_t start_addr, end_addr; + dma_addr_t start_addr; unsigned int npages, page_size, i = 0; struct scatterlist *sgl; int ret = 0; DRM_DEBUG_KMS("%s\n", __FILE__); - if (flags & EXYNOS_BO_NONCONTIG) { + if (IS_NONCONTIG_BUFFER(flags)) { DRM_DEBUG_KMS("not support allocation type.\n"); return -EINVAL; } @@ -52,13 +52,13 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, } if (buf->size >= SZ_1M) { - npages = (buf->size >> SECTION_SHIFT) + 1; + npages = buf->size >> SECTION_SHIFT; page_size = SECTION_SIZE; } else if (buf->size >= SZ_64K) { - npages = (buf->size >> 16) + 1; + npages = buf->size >> 16; page_size = SZ_64K; } else { - npages = (buf->size >> PAGE_SHIFT) + 1; + npages = buf->size >> PAGE_SHIFT; page_size = PAGE_SIZE; } @@ -76,26 +76,13 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, return -ENOMEM; } - buf->kvaddr = dma_alloc_writecombine(dev->dev, buf->size, - &buf->dma_addr, GFP_KERNEL); - if (!buf->kvaddr) { - DRM_ERROR("failed to allocate buffer.\n"); - ret = -ENOMEM; - goto err1; - } - - start_addr = buf->dma_addr; - end_addr = buf->dma_addr + buf->size; - - buf->pages = kzalloc(sizeof(struct page) * npages, GFP_KERNEL); - if (!buf->pages) { - DRM_ERROR("failed to allocate pages.\n"); - ret = -ENOMEM; - goto err2; - } - - start_addr = buf->dma_addr; - end_addr = buf->dma_addr + buf->size; + buf->kvaddr = dma_alloc_writecombine(dev->dev, buf->size, + &buf->dma_addr, GFP_KERNEL); + if (!buf->kvaddr) { + DRM_ERROR("failed to allocate buffer.\n"); + ret = -ENOMEM; + goto err1; + } buf->pages = kzalloc(sizeof(struct page) * npages, GFP_KERNEL); if (!buf->pages) { @@ -105,23 +92,17 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, } sgl = buf->sgt->sgl; + start_addr = buf->dma_addr; while (i < npages) { buf->pages[i] = phys_to_page(start_addr); sg_set_page(sgl, buf->pages[i], page_size, 0); sg_dma_address(sgl) = start_addr; start_addr += page_size; - if (end_addr - start_addr < page_size) - break; sgl = sg_next(sgl); i++; } - buf->pages[i] = phys_to_page(start_addr); - - sgl = sg_next(sgl); - sg_set_page(sgl, buf->pages[i+1], end_addr - start_addr, 0); - DRM_DEBUG_KMS("vaddr(0x%lx), dma_addr(0x%lx), size(0x%lx)\n", (unsigned long)buf->kvaddr, (unsigned long)buf->dma_addr, @@ -150,7 +131,7 @@ static void lowlevel_buffer_deallocate(struct drm_device *dev, * non-continuous memory would be released by exynos * gem framework. */ - if (flags & EXYNOS_BO_NONCONTIG) { + if (IS_NONCONTIG_BUFFER(flags)) { DRM_DEBUG_KMS("not support allocation type.\n"); return; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c index 411832e8e17a..eaf630dc5dba 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_core.c +++ b/drivers/gpu/drm/exynos/exynos_drm_core.c @@ -54,16 +54,18 @@ static int exynos_drm_subdrv_probe(struct drm_device *dev, * * P.S. note that this driver is considered for modularization. */ - ret = subdrv->probe(dev, subdrv->manager.dev); + ret = subdrv->probe(dev, subdrv->dev); if (ret) return ret; } - if (subdrv->is_local) + if (!subdrv->manager) return 0; + subdrv->manager->dev = subdrv->dev; + /* create and initialize a encoder for this sub driver. */ - encoder = exynos_drm_encoder_create(dev, &subdrv->manager, + encoder = exynos_drm_encoder_create(dev, subdrv->manager, (1 << MAX_CRTC) - 1); if (!encoder) { DRM_ERROR("failed to create encoder\n"); @@ -186,7 +188,7 @@ int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file) list_for_each_entry(subdrv, &exynos_drm_subdrv_list, list) { if (subdrv->open) { - ret = subdrv->open(dev, subdrv->manager.dev, file); + ret = subdrv->open(dev, subdrv->dev, file); if (ret) goto err; } @@ -197,7 +199,7 @@ int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file) err: list_for_each_entry_reverse(subdrv, &subdrv->list, list) { if (subdrv->close) - subdrv->close(dev, subdrv->manager.dev, file); + subdrv->close(dev, subdrv->dev, file); } return ret; } @@ -209,7 +211,7 @@ void exynos_drm_subdrv_close(struct drm_device *dev, struct drm_file *file) list_for_each_entry(subdrv, &exynos_drm_subdrv_list, list) { if (subdrv->close) - subdrv->close(dev, subdrv->manager.dev, file); + subdrv->close(dev, subdrv->dev, file); } } EXPORT_SYMBOL_GPL(exynos_drm_subdrv_close); diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index fbd0a232c93d..1d814175cd49 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -225,24 +225,25 @@ struct exynos_drm_private { * Exynos drm sub driver structure. * * @list: sub driver has its own list object to register to exynos drm driver. + * @dev: pointer to device object for subdrv device driver. * @drm_dev: pointer to drm_device and this pointer would be set * when sub driver calls exynos_drm_subdrv_register(). - * @is_local: appear encoder and connector disrelated device. + * @manager: subdrv has its own manager to control a hardware appropriately + * and we can access a hardware drawing on this manager. * @probe: this callback would be called by exynos drm driver after * subdrv is registered to it. * @remove: this callback is used to release resources created * by probe callback. * @open: this would be called with drm device file open. * @close: this would be called with drm device file close. - * @manager: subdrv has its own manager to control a hardware appropriately - * and we can access a hardware drawing on this manager. * @encoder: encoder object owned by this sub driver. * @connector: connector object owned by this sub driver. */ struct exynos_drm_subdrv { struct list_head list; + struct device *dev; struct drm_device *drm_dev; - bool is_local; + struct exynos_drm_manager *manager; int (*probe)(struct drm_device *drm_dev, struct device *dev); void (*remove)(struct drm_device *dev); @@ -251,7 +252,6 @@ struct exynos_drm_subdrv { void (*close)(struct drm_device *drm_dev, struct device *dev, struct drm_file *file); - struct exynos_drm_manager manager; struct drm_encoder *encoder; struct drm_connector *connector; }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index ecb6db229700..29fdbfeb43cb 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -172,7 +172,7 @@ static void fimd_dpms(struct device *subdrv_dev, int mode) static void fimd_apply(struct device *subdrv_dev) { struct fimd_context *ctx = get_fimd_context(subdrv_dev); - struct exynos_drm_manager *mgr = &ctx->subdrv.manager; + struct exynos_drm_manager *mgr = ctx->subdrv.manager; struct exynos_drm_manager_ops *mgr_ops = mgr->ops; struct exynos_drm_overlay_ops *ovl_ops = mgr->overlay_ops; struct fimd_win_data *win_data; @@ -577,6 +577,13 @@ static struct exynos_drm_overlay_ops fimd_overlay_ops = { .disable = fimd_win_disable, }; +static struct exynos_drm_manager fimd_manager = { + .pipe = -1, + .ops = &fimd_manager_ops, + .overlay_ops = &fimd_overlay_ops, + .display_ops = &fimd_display_ops, +}; + static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc) { struct exynos_drm_private *dev_priv = drm_dev->dev_private; @@ -628,7 +635,7 @@ static irqreturn_t fimd_irq_handler(int irq, void *dev_id) struct fimd_context *ctx = (struct fimd_context *)dev_id; struct exynos_drm_subdrv *subdrv = &ctx->subdrv; struct drm_device *drm_dev = subdrv->drm_dev; - struct exynos_drm_manager *manager = &subdrv->manager; + struct exynos_drm_manager *manager = subdrv->manager; u32 val; val = readl(ctx->regs + VIDINTCON1); @@ -744,7 +751,7 @@ static void fimd_clear_win(struct fimd_context *ctx, int win) static int fimd_power_on(struct fimd_context *ctx, bool enable) { struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct device *dev = subdrv->manager.dev; + struct device *dev = subdrv->dev; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -867,13 +874,10 @@ static int __devinit fimd_probe(struct platform_device *pdev) subdrv = &ctx->subdrv; + subdrv->dev = dev; + subdrv->manager = &fimd_manager; subdrv->probe = fimd_subdrv_probe; subdrv->remove = fimd_subdrv_remove; - subdrv->manager.pipe = -1; - subdrv->manager.ops = &fimd_manager_ops; - subdrv->manager.overlay_ops = &fimd_overlay_ops; - subdrv->manager.display_ops = &fimd_display_ops; - subdrv->manager.dev = dev; mutex_init(&ctx->lock); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index fa1aa94a3d8e..26d51979116b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -56,9 +56,28 @@ static unsigned int convert_to_vm_err_msg(int msg) return out_msg; } -static unsigned int mask_gem_flags(unsigned int flags) +static int check_gem_flags(unsigned int flags) { - return flags &= EXYNOS_BO_NONCONTIG; + if (flags & ~(EXYNOS_BO_MASK)) { + DRM_ERROR("invalid flags.\n"); + return -EINVAL; + } + + return 0; +} + +static unsigned long roundup_gem_size(unsigned long size, unsigned int flags) +{ + if (!IS_NONCONTIG_BUFFER(flags)) { + if (size >= SZ_1M) + return roundup(size, SECTION_SIZE); + else if (size >= SZ_64K) + return roundup(size, SZ_64K); + else + goto out; + } +out: + return roundup(size, PAGE_SIZE); } static struct page **exynos_gem_get_pages(struct drm_gem_object *obj, @@ -319,10 +338,17 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, struct exynos_drm_gem_buf *buf; int ret; - size = roundup(size, PAGE_SIZE); - DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); + if (!size) { + DRM_ERROR("invalid size.\n"); + return ERR_PTR(-EINVAL); + } - flags = mask_gem_flags(flags); + size = roundup_gem_size(size, flags); + DRM_DEBUG_KMS("%s\n", __FILE__); + + ret = check_gem_flags(flags); + if (ret) + return ERR_PTR(ret); buf = exynos_drm_init_buf(dev, size); if (!buf) @@ -331,7 +357,7 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, exynos_gem_obj = exynos_drm_gem_init(dev, size); if (!exynos_gem_obj) { ret = -ENOMEM; - goto err; + goto err_fini_buf; } exynos_gem_obj->buffer = buf; @@ -347,18 +373,19 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, ret = exynos_drm_gem_get_pages(&exynos_gem_obj->base); if (ret < 0) { drm_gem_object_release(&exynos_gem_obj->base); - goto err; + goto err_fini_buf; } } else { ret = exynos_drm_alloc_buf(dev, buf, flags); if (ret < 0) { drm_gem_object_release(&exynos_gem_obj->base); - goto err; + goto err_fini_buf; } } return exynos_gem_obj; -err: + +err_fini_buf: exynos_drm_fini_buf(dev, buf); return ERR_PTR(ret); } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h index e40fbad8b705..4ed842039505 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.h +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h @@ -29,6 +29,8 @@ #define to_exynos_gem_obj(x) container_of(x,\ struct exynos_drm_gem_obj, base) +#define IS_NONCONTIG_BUFFER(f) (f & EXYNOS_BO_NONCONTIG) + /* * exynos drm gem buffer structure. * diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index 14eb26b0ba1c..3424463676e0 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -30,9 +30,8 @@ struct drm_hdmi_context, subdrv); /* these callback points shoud be set by specific drivers. */ -static struct exynos_hdmi_display_ops *hdmi_display_ops; -static struct exynos_hdmi_manager_ops *hdmi_manager_ops; -static struct exynos_hdmi_overlay_ops *hdmi_overlay_ops; +static struct exynos_hdmi_ops *hdmi_ops; +static struct exynos_mixer_ops *mixer_ops; struct drm_hdmi_context { struct exynos_drm_subdrv subdrv; @@ -40,31 +39,20 @@ struct drm_hdmi_context { struct exynos_drm_hdmi_context *mixer_ctx; }; -void exynos_drm_display_ops_register(struct exynos_hdmi_display_ops - *display_ops) +void exynos_hdmi_ops_register(struct exynos_hdmi_ops *ops) { DRM_DEBUG_KMS("%s\n", __FILE__); - if (display_ops) - hdmi_display_ops = display_ops; + if (ops) + hdmi_ops = ops; } -void exynos_drm_manager_ops_register(struct exynos_hdmi_manager_ops - *manager_ops) +void exynos_mixer_ops_register(struct exynos_mixer_ops *ops) { DRM_DEBUG_KMS("%s\n", __FILE__); - if (manager_ops) - hdmi_manager_ops = manager_ops; -} - -void exynos_drm_overlay_ops_register(struct exynos_hdmi_overlay_ops - *overlay_ops) -{ - DRM_DEBUG_KMS("%s\n", __FILE__); - - if (overlay_ops) - hdmi_overlay_ops = overlay_ops; + if (ops) + mixer_ops = ops; } static bool drm_hdmi_is_connected(struct device *dev) @@ -73,8 +61,8 @@ static bool drm_hdmi_is_connected(struct device *dev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_display_ops && hdmi_display_ops->is_connected) - return hdmi_display_ops->is_connected(ctx->hdmi_ctx->ctx); + if (hdmi_ops && hdmi_ops->is_connected) + return hdmi_ops->is_connected(ctx->hdmi_ctx->ctx); return false; } @@ -86,9 +74,9 @@ static int drm_hdmi_get_edid(struct device *dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_display_ops && hdmi_display_ops->get_edid) - return hdmi_display_ops->get_edid(ctx->hdmi_ctx->ctx, - connector, edid, len); + if (hdmi_ops && hdmi_ops->get_edid) + return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector, edid, + len); return 0; } @@ -99,9 +87,8 @@ static int drm_hdmi_check_timing(struct device *dev, void *timing) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_display_ops && hdmi_display_ops->check_timing) - return hdmi_display_ops->check_timing(ctx->hdmi_ctx->ctx, - timing); + if (hdmi_ops && hdmi_ops->check_timing) + return hdmi_ops->check_timing(ctx->hdmi_ctx->ctx, timing); return 0; } @@ -112,8 +99,8 @@ static int drm_hdmi_power_on(struct device *dev, int mode) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_display_ops && hdmi_display_ops->power_on) - return hdmi_display_ops->power_on(ctx->hdmi_ctx->ctx, mode); + if (hdmi_ops && hdmi_ops->power_on) + return hdmi_ops->power_on(ctx->hdmi_ctx->ctx, mode); return 0; } @@ -130,13 +117,13 @@ static int drm_hdmi_enable_vblank(struct device *subdrv_dev) { struct drm_hdmi_context *ctx = to_context(subdrv_dev); struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct exynos_drm_manager *manager = &subdrv->manager; + struct exynos_drm_manager *manager = subdrv->manager; DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->enable_vblank) - return hdmi_overlay_ops->enable_vblank(ctx->mixer_ctx->ctx, - manager->pipe); + if (mixer_ops && mixer_ops->enable_vblank) + return mixer_ops->enable_vblank(ctx->mixer_ctx->ctx, + manager->pipe); return 0; } @@ -147,8 +134,8 @@ static void drm_hdmi_disable_vblank(struct device *subdrv_dev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->disable_vblank) - return hdmi_overlay_ops->disable_vblank(ctx->mixer_ctx->ctx); + if (mixer_ops && mixer_ops->disable_vblank) + return mixer_ops->disable_vblank(ctx->mixer_ctx->ctx); } static void drm_hdmi_mode_fixup(struct device *subdrv_dev, @@ -160,9 +147,9 @@ static void drm_hdmi_mode_fixup(struct device *subdrv_dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_manager_ops && hdmi_manager_ops->mode_fixup) - hdmi_manager_ops->mode_fixup(ctx->hdmi_ctx->ctx, connector, - mode, adjusted_mode); + if (hdmi_ops && hdmi_ops->mode_fixup) + hdmi_ops->mode_fixup(ctx->hdmi_ctx->ctx, connector, mode, + adjusted_mode); } static void drm_hdmi_mode_set(struct device *subdrv_dev, void *mode) @@ -171,8 +158,8 @@ static void drm_hdmi_mode_set(struct device *subdrv_dev, void *mode) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_manager_ops && hdmi_manager_ops->mode_set) - hdmi_manager_ops->mode_set(ctx->hdmi_ctx->ctx, mode); + if (hdmi_ops && hdmi_ops->mode_set) + hdmi_ops->mode_set(ctx->hdmi_ctx->ctx, mode); } static void drm_hdmi_get_max_resol(struct device *subdrv_dev, @@ -182,9 +169,8 @@ static void drm_hdmi_get_max_resol(struct device *subdrv_dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_manager_ops && hdmi_manager_ops->get_max_resol) - hdmi_manager_ops->get_max_resol(ctx->hdmi_ctx->ctx, width, - height); + if (hdmi_ops && hdmi_ops->get_max_resol) + hdmi_ops->get_max_resol(ctx->hdmi_ctx->ctx, width, height); } static void drm_hdmi_commit(struct device *subdrv_dev) @@ -193,8 +179,8 @@ static void drm_hdmi_commit(struct device *subdrv_dev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_manager_ops && hdmi_manager_ops->commit) - hdmi_manager_ops->commit(ctx->hdmi_ctx->ctx); + if (hdmi_ops && hdmi_ops->commit) + hdmi_ops->commit(ctx->hdmi_ctx->ctx); } static void drm_hdmi_dpms(struct device *subdrv_dev, int mode) @@ -209,8 +195,8 @@ static void drm_hdmi_dpms(struct device *subdrv_dev, int mode) case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: - if (hdmi_manager_ops && hdmi_manager_ops->disable) - hdmi_manager_ops->disable(ctx->hdmi_ctx->ctx); + if (hdmi_ops && hdmi_ops->disable) + hdmi_ops->disable(ctx->hdmi_ctx->ctx); break; default: DRM_DEBUG_KMS("unkown dps mode: %d\n", mode); @@ -235,8 +221,8 @@ static void drm_mixer_mode_set(struct device *subdrv_dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->win_mode_set) - hdmi_overlay_ops->win_mode_set(ctx->mixer_ctx->ctx, overlay); + if (mixer_ops && mixer_ops->win_mode_set) + mixer_ops->win_mode_set(ctx->mixer_ctx->ctx, overlay); } static void drm_mixer_commit(struct device *subdrv_dev, int zpos) @@ -245,8 +231,8 @@ static void drm_mixer_commit(struct device *subdrv_dev, int zpos) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->win_commit) - hdmi_overlay_ops->win_commit(ctx->mixer_ctx->ctx, zpos); + if (mixer_ops && mixer_ops->win_commit) + mixer_ops->win_commit(ctx->mixer_ctx->ctx, zpos); } static void drm_mixer_disable(struct device *subdrv_dev, int zpos) @@ -255,8 +241,8 @@ static void drm_mixer_disable(struct device *subdrv_dev, int zpos) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->win_disable) - hdmi_overlay_ops->win_disable(ctx->mixer_ctx->ctx, zpos); + if (mixer_ops && mixer_ops->win_disable) + mixer_ops->win_disable(ctx->mixer_ctx->ctx, zpos); } static struct exynos_drm_overlay_ops drm_hdmi_overlay_ops = { @@ -265,6 +251,12 @@ static struct exynos_drm_overlay_ops drm_hdmi_overlay_ops = { .disable = drm_mixer_disable, }; +static struct exynos_drm_manager hdmi_manager = { + .pipe = -1, + .ops = &drm_hdmi_manager_ops, + .overlay_ops = &drm_hdmi_overlay_ops, + .display_ops = &drm_hdmi_display_ops, +}; static int hdmi_subdrv_probe(struct drm_device *drm_dev, struct device *dev) @@ -332,12 +324,9 @@ static int __devinit exynos_drm_hdmi_probe(struct platform_device *pdev) subdrv = &ctx->subdrv; + subdrv->dev = dev; + subdrv->manager = &hdmi_manager; subdrv->probe = hdmi_subdrv_probe; - subdrv->manager.pipe = -1; - subdrv->manager.ops = &drm_hdmi_manager_ops; - subdrv->manager.overlay_ops = &drm_hdmi_overlay_ops; - subdrv->manager.display_ops = &drm_hdmi_display_ops; - subdrv->manager.dev = dev; platform_set_drvdata(pdev, subdrv); diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.h b/drivers/gpu/drm/exynos/exynos_drm_hdmi.h index 44497cfb6c74..f3ae192c8dcf 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.h +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.h @@ -38,15 +38,15 @@ struct exynos_drm_hdmi_context { void *ctx; }; -struct exynos_hdmi_display_ops { +struct exynos_hdmi_ops { + /* display */ bool (*is_connected)(void *ctx); int (*get_edid)(void *ctx, struct drm_connector *connector, u8 *edid, int len); int (*check_timing)(void *ctx, void *timing); int (*power_on)(void *ctx, int mode); -}; -struct exynos_hdmi_manager_ops { + /* manager */ void (*mode_fixup)(void *ctx, struct drm_connector *connector, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); @@ -57,22 +57,17 @@ struct exynos_hdmi_manager_ops { void (*disable)(void *ctx); }; -struct exynos_hdmi_overlay_ops { +struct exynos_mixer_ops { + /* manager */ int (*enable_vblank)(void *ctx, int pipe); void (*disable_vblank)(void *ctx); + + /* overlay */ void (*win_mode_set)(void *ctx, struct exynos_drm_overlay *overlay); void (*win_commit)(void *ctx, int zpos); void (*win_disable)(void *ctx, int zpos); }; -extern struct platform_driver hdmi_driver; -extern struct platform_driver mixer_driver; - -void exynos_drm_display_ops_register(struct exynos_hdmi_display_ops - *display_ops); -void exynos_drm_manager_ops_register(struct exynos_hdmi_manager_ops - *manager_ops); -void exynos_drm_overlay_ops_register(struct exynos_hdmi_overlay_ops - *overlay_ops); - +void exynos_hdmi_ops_register(struct exynos_hdmi_ops *ops); +void exynos_mixer_ops_register(struct exynos_mixer_ops *ops); #endif diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index c277a3a445f5..f92fe4c6174a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -24,6 +24,10 @@ struct exynos_plane { static const uint32_t formats[] = { DRM_FORMAT_XRGB8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_NV12, + DRM_FORMAT_NV12M, + DRM_FORMAT_NV12MT, }; static int diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 8e1339f9fe1f..7b9c153dceb6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -199,7 +199,7 @@ static void vidi_dpms(struct device *subdrv_dev, int mode) static void vidi_apply(struct device *subdrv_dev) { struct vidi_context *ctx = get_vidi_context(subdrv_dev); - struct exynos_drm_manager *mgr = &ctx->subdrv.manager; + struct exynos_drm_manager *mgr = ctx->subdrv.manager; struct exynos_drm_manager_ops *mgr_ops = mgr->ops; struct exynos_drm_overlay_ops *ovl_ops = mgr->overlay_ops; struct vidi_win_data *win_data; @@ -374,6 +374,13 @@ static struct exynos_drm_overlay_ops vidi_overlay_ops = { .disable = vidi_win_disable, }; +static struct exynos_drm_manager vidi_manager = { + .pipe = -1, + .ops = &vidi_manager_ops, + .overlay_ops = &vidi_overlay_ops, + .display_ops = &vidi_display_ops, +}; + static void vidi_finish_pageflip(struct drm_device *drm_dev, int crtc) { struct exynos_drm_private *dev_priv = drm_dev->dev_private; @@ -425,7 +432,7 @@ static void vidi_fake_vblank_handler(struct work_struct *work) struct vidi_context *ctx = container_of(work, struct vidi_context, work); struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct exynos_drm_manager *manager = &subdrv->manager; + struct exynos_drm_manager *manager = subdrv->manager; if (manager->pipe < 0) return; @@ -471,7 +478,7 @@ static void vidi_subdrv_remove(struct drm_device *drm_dev) static int vidi_power_on(struct vidi_context *ctx, bool enable) { struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct device *dev = subdrv->manager.dev; + struct device *dev = subdrv->dev; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -611,13 +618,10 @@ static int __devinit vidi_probe(struct platform_device *pdev) ctx->raw_edid = (struct edid *)fake_edid_info; subdrv = &ctx->subdrv; + subdrv->dev = dev; + subdrv->manager = &vidi_manager; subdrv->probe = vidi_subdrv_probe; subdrv->remove = vidi_subdrv_remove; - subdrv->manager.pipe = -1; - subdrv->manager.ops = &vidi_manager_ops; - subdrv->manager.overlay_ops = &vidi_overlay_ops; - subdrv->manager.display_ops = &vidi_display_ops; - subdrv->manager.dev = dev; mutex_init(&ctx->lock); diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 575a8cbd3533..b00353876458 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -40,7 +40,6 @@ #include "exynos_hdmi.h" -#define HDMI_OVERLAY_NUMBER 3 #define MAX_WIDTH 1920 #define MAX_HEIGHT 1080 #define get_hdmi_context(dev) platform_get_drvdata(to_platform_device(dev)) @@ -1194,7 +1193,7 @@ static int hdmi_conf_index(struct hdmi_context *hdata, static bool hdmi_is_connected(void *ctx) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; u32 val = hdmi_reg_read(hdata, HDMI_HPD_STATUS); if (val) @@ -1207,7 +1206,7 @@ static int hdmi_get_edid(void *ctx, struct drm_connector *connector, u8 *edid, int len) { struct edid *raw_edid; - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1275,7 +1274,7 @@ static int hdmi_v14_check_timing(struct fb_videomode *check_timing) static int hdmi_check_timing(void *ctx, void *timing) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; struct fb_videomode *check_timing = timing; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1312,13 +1311,6 @@ static int hdmi_display_power_on(void *ctx, int mode) return 0; } -static struct exynos_hdmi_display_ops display_ops = { - .is_connected = hdmi_is_connected, - .get_edid = hdmi_get_edid, - .check_timing = hdmi_check_timing, - .power_on = hdmi_display_power_on, -}; - static void hdmi_set_acr(u32 freq, u8 *acr) { u32 n, cts; @@ -1914,7 +1906,7 @@ static void hdmi_mode_fixup(void *ctx, struct drm_connector *connector, struct drm_display_mode *adjusted_mode) { struct drm_display_mode *m; - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; int index; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1951,7 +1943,7 @@ static void hdmi_mode_fixup(void *ctx, struct drm_connector *connector, static void hdmi_mode_set(void *ctx, void *mode) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; int conf_idx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1974,7 +1966,7 @@ static void hdmi_get_max_resol(void *ctx, unsigned int *width, static void hdmi_commit(void *ctx) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1985,7 +1977,7 @@ static void hdmi_commit(void *ctx) static void hdmi_disable(void *ctx) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1996,7 +1988,14 @@ static void hdmi_disable(void *ctx) } } -static struct exynos_hdmi_manager_ops manager_ops = { +static struct exynos_hdmi_ops hdmi_ops = { + /* display */ + .is_connected = hdmi_is_connected, + .get_edid = hdmi_get_edid, + .check_timing = hdmi_check_timing, + .power_on = hdmi_display_power_on, + + /* manager */ .mode_fixup = hdmi_mode_fixup, .mode_set = hdmi_mode_set, .get_max_resol = hdmi_get_max_resol, @@ -2020,7 +2019,7 @@ static void hdmi_hotplug_func(struct work_struct *work) static irqreturn_t hdmi_irq_handler(int irq, void *arg) { struct exynos_drm_hdmi_context *ctx = arg; - struct hdmi_context *hdata = (struct hdmi_context *)ctx->ctx; + struct hdmi_context *hdata = ctx->ctx; u32 intc_flag; intc_flag = hdmi_reg_read(hdata, HDMI_INTC_FLAG); @@ -2173,7 +2172,7 @@ static int hdmi_runtime_suspend(struct device *dev) DRM_DEBUG_KMS("%s\n", __func__); - hdmi_resource_poweroff((struct hdmi_context *)ctx->ctx); + hdmi_resource_poweroff(ctx->ctx); return 0; } @@ -2184,7 +2183,7 @@ static int hdmi_runtime_resume(struct device *dev) DRM_DEBUG_KMS("%s\n", __func__); - hdmi_resource_poweron((struct hdmi_context *)ctx->ctx); + hdmi_resource_poweron(ctx->ctx); return 0; } @@ -2322,8 +2321,7 @@ static int __devinit hdmi_probe(struct platform_device *pdev) hdata->irq = res->start; /* register specific callbacks to common hdmi. */ - exynos_drm_display_ops_register(&display_ops); - exynos_drm_manager_ops_register(&manager_ops); + exynos_hdmi_ops_register(&hdmi_ops); hdmi_resource_poweron(hdata); @@ -2351,7 +2349,7 @@ err_data: static int __devexit hdmi_remove(struct platform_device *pdev) { struct exynos_drm_hdmi_context *ctx = platform_get_drvdata(pdev); - struct hdmi_context *hdata = (struct hdmi_context *)ctx->ctx; + struct hdmi_context *hdata = ctx->ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 4d5f41e19527..e15438c01129 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -37,7 +37,8 @@ #include "exynos_drm_drv.h" #include "exynos_drm_hdmi.h" -#define HDMI_OVERLAY_NUMBER 3 +#define MIXER_WIN_NR 3 +#define MIXER_DEFAULT_WIN 0 #define get_mixer_context(dev) platform_get_drvdata(to_platform_device(dev)) @@ -75,16 +76,12 @@ struct mixer_resources { }; struct mixer_context { - struct fb_videomode *default_timing; - unsigned int default_win; - unsigned int default_bpp; unsigned int irq; int pipe; bool interlace; - bool vp_enabled; struct mixer_resources mixer_res; - struct hdmi_win_data win_data[HDMI_OVERLAY_NUMBER]; + struct hdmi_win_data win_data[MIXER_WIN_NR]; }; static const u8 filter_y_horiz_tap8[] = { @@ -643,9 +640,9 @@ static void mixer_win_mode_set(void *ctx, win = overlay->zpos; if (win == DEFAULT_ZPOS) - win = mixer_ctx->default_win; + win = MIXER_DEFAULT_WIN; - if (win < 0 || win > HDMI_OVERLAY_NUMBER) { + if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); return; } @@ -683,9 +680,9 @@ static void mixer_win_commit(void *ctx, int zpos) DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win); if (win == DEFAULT_ZPOS) - win = mixer_ctx->default_win; + win = MIXER_DEFAULT_WIN; - if (win < 0 || win > HDMI_OVERLAY_NUMBER) { + if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); return; } @@ -706,9 +703,9 @@ static void mixer_win_disable(void *ctx, int zpos) DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win); if (win == DEFAULT_ZPOS) - win = mixer_ctx->default_win; + win = MIXER_DEFAULT_WIN; - if (win < 0 || win > HDMI_OVERLAY_NUMBER) { + if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); return; } @@ -722,9 +719,12 @@ static void mixer_win_disable(void *ctx, int zpos) spin_unlock_irqrestore(&res->reg_slock, flags); } -static struct exynos_hdmi_overlay_ops overlay_ops = { +static struct exynos_mixer_ops mixer_ops = { + /* manager */ .enable_vblank = mixer_enable_vblank, .disable_vblank = mixer_disable_vblank, + + /* overlay */ .win_mode_set = mixer_win_mode_set, .win_commit = mixer_win_commit, .win_disable = mixer_win_disable, @@ -771,8 +771,7 @@ static void mixer_finish_pageflip(struct drm_device *drm_dev, int crtc) static irqreturn_t mixer_irq_handler(int irq, void *arg) { struct exynos_drm_hdmi_context *drm_hdmi_ctx = arg; - struct mixer_context *ctx = - (struct mixer_context *)drm_hdmi_ctx->ctx; + struct mixer_context *ctx = drm_hdmi_ctx->ctx; struct mixer_resources *res = &ctx->mixer_res; u32 val, val_base; @@ -902,7 +901,7 @@ static int mixer_runtime_resume(struct device *dev) DRM_DEBUG_KMS("resume - start\n"); - mixer_resource_poweron((struct mixer_context *)ctx->ctx); + mixer_resource_poweron(ctx->ctx); return 0; } @@ -913,7 +912,7 @@ static int mixer_runtime_suspend(struct device *dev) DRM_DEBUG_KMS("suspend - start\n"); - mixer_resource_poweroff((struct mixer_context *)ctx->ctx); + mixer_resource_poweroff(ctx->ctx); return 0; } @@ -926,8 +925,7 @@ static const struct dev_pm_ops mixer_pm_ops = { static int __devinit mixer_resources_init(struct exynos_drm_hdmi_context *ctx, struct platform_device *pdev) { - struct mixer_context *mixer_ctx = - (struct mixer_context *)ctx->ctx; + struct mixer_context *mixer_ctx = ctx->ctx; struct device *dev = &pdev->dev; struct mixer_resources *mixer_res = &mixer_ctx->mixer_res; struct resource *res; @@ -1076,7 +1074,7 @@ static int __devinit mixer_probe(struct platform_device *pdev) goto fail; /* register specific callback point to common hdmi. */ - exynos_drm_overlay_ops_register(&overlay_ops); + exynos_mixer_ops_register(&mixer_ops); mixer_resource_poweron(ctx); @@ -1093,7 +1091,7 @@ static int mixer_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; struct exynos_drm_hdmi_context *drm_hdmi_ctx = platform_get_drvdata(pdev); - struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx; + struct mixer_context *ctx = drm_hdmi_ctx->ctx; dev_info(dev, "remove successful\n"); diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index fdb7ccefffbd..b505b70dba05 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1502,14 +1502,6 @@ static int i915_ppgtt_info(struct seq_file *m, void *data) return 0; } -static int -i915_debugfs_common_open(struct inode *inode, - struct file *filp) -{ - filp->private_data = inode->i_private; - return 0; -} - static ssize_t i915_wedged_read(struct file *filp, char __user *ubuf, @@ -1560,7 +1552,7 @@ i915_wedged_write(struct file *filp, static const struct file_operations i915_wedged_fops = { .owner = THIS_MODULE, - .open = i915_debugfs_common_open, + .open = simple_open, .read = i915_wedged_read, .write = i915_wedged_write, .llseek = default_llseek, @@ -1622,7 +1614,7 @@ i915_max_freq_write(struct file *filp, static const struct file_operations i915_max_freq_fops = { .owner = THIS_MODULE, - .open = i915_debugfs_common_open, + .open = simple_open, .read = i915_max_freq_read, .write = i915_max_freq_write, .llseek = default_llseek, @@ -1693,7 +1685,7 @@ i915_cache_sharing_write(struct file *filp, static const struct file_operations i915_cache_sharing_fops = { .owner = THIS_MODULE, - .open = i915_debugfs_common_open, + .open = simple_open, .read = i915_cache_sharing_read, .write = i915_cache_sharing_write, .llseek = default_llseek, diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 9341eb8ce93b..785f67f963ef 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1183,6 +1183,21 @@ static bool i915_switcheroo_can_switch(struct pci_dev *pdev) return can_switch; } +static bool +intel_enable_ppgtt(struct drm_device *dev) +{ + if (i915_enable_ppgtt >= 0) + return i915_enable_ppgtt; + +#ifdef CONFIG_INTEL_IOMMU + /* Disable ppgtt on SNB if VT-d is on. */ + if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped) + return false; +#endif + + return true; +} + static int i915_load_gem_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -1197,7 +1212,7 @@ static int i915_load_gem_init(struct drm_device *dev) drm_mm_init(&dev_priv->mm.stolen, 0, prealloc_size); mutex_lock(&dev->struct_mutex); - if (i915_enable_ppgtt && HAS_ALIASING_PPGTT(dev)) { + if (intel_enable_ppgtt(dev) && HAS_ALIASING_PPGTT(dev)) { /* PPGTT pdes are stolen from global gtt ptes, so shrink the * aperture accordingly when using aliasing ppgtt. */ gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE; @@ -1207,8 +1222,10 @@ static int i915_load_gem_init(struct drm_device *dev) i915_gem_do_init(dev, 0, mappable_size, gtt_size); ret = i915_gem_init_aliasing_ppgtt(dev); - if (ret) + if (ret) { + mutex_unlock(&dev->struct_mutex); return ret; + } } else { /* Let GEM Manage all of the aperture. * diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 1a7559b59997..ae8a64f9f845 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -64,9 +64,13 @@ MODULE_PARM_DESC(semaphores, "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))"); int i915_enable_rc6 __read_mostly = -1; -module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); +module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400); MODULE_PARM_DESC(i915_enable_rc6, - "Enable power-saving render C-state 6 (default: -1 (use per-chip default)"); + "Enable power-saving render C-state 6. " + "Different stages can be selected via bitmask values " + "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). " + "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. " + "default: -1 (use per-chip default)"); int i915_enable_fbc __read_mostly = -1; module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600); @@ -103,8 +107,8 @@ MODULE_PARM_DESC(enable_hangcheck, "WARNING: Disabling this can cause system wide hangs. " "(default: true)"); -bool i915_enable_ppgtt __read_mostly = 1; -module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, bool, 0600); +int i915_enable_ppgtt __read_mostly = -1; +module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600); MODULE_PARM_DESC(i915_enable_ppgtt, "Enable PPGTT (default: true)"); @@ -292,6 +296,7 @@ static const struct pci_device_id pciidlist[] = { /* aka */ INTEL_VGA_DEVICE(0x0152, &intel_ivybridge_d_info), /* GT1 desktop */ INTEL_VGA_DEVICE(0x0162, &intel_ivybridge_d_info), /* GT2 desktop */ INTEL_VGA_DEVICE(0x015a, &intel_ivybridge_d_info), /* GT1 server */ + INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */ {0, 0, 0} }; @@ -533,7 +538,9 @@ static int i915_drm_thaw(struct drm_device *dev) drm_irq_install(dev); /* Resume the modeset for every activated CRTC */ + mutex_lock(&dev->mode_config.mutex); drm_helper_resume_force_mode(dev); + mutex_unlock(&dev->mode_config.mutex); if (IS_IRONLAKE_M(dev)) ironlake_enable_rc6(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index c0f19f572004..5fabc6c31fec 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1053,6 +1053,27 @@ struct drm_i915_file_private { #include "i915_trace.h" +/** + * RC6 is a special power stage which allows the GPU to enter an very + * low-voltage mode when idle, using down to 0V while at this stage. This + * stage is entered automatically when the GPU is idle when RC6 support is + * enabled, and as soon as new workload arises GPU wakes up automatically as well. + * + * There are different RC6 modes available in Intel GPU, which differentiate + * among each other with the latency required to enter and leave RC6 and + * voltage consumed by the GPU in different states. + * + * The combination of the following flags define which states GPU is allowed + * to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and + * RC6pp is deepest RC6. Their support by hardware varies according to the + * GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one + * which brings the most power savings; deeper states save more power, but + * require higher latency to switch to and wake up. + */ +#define INTEL_RC6_ENABLE (1<<0) +#define INTEL_RC6p_ENABLE (1<<1) +#define INTEL_RC6pp_ENABLE (1<<2) + extern struct drm_ioctl_desc i915_ioctls[]; extern int i915_max_ioctl; extern unsigned int i915_fbpercrtc __always_unused; @@ -1065,7 +1086,7 @@ extern int i915_vbt_sdvo_panel_type __read_mostly; extern int i915_enable_rc6 __read_mostly; extern int i915_enable_fbc __read_mostly; extern bool i915_enable_hangcheck __read_mostly; -extern bool i915_enable_ppgtt __read_mostly; +extern int i915_enable_ppgtt __read_mostly; extern int i915_suspend(struct drm_device *dev, pm_message_t state); extern int i915_resume(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 1f441f5c2405..0e3c6acde955 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1472,16 +1472,19 @@ i915_gem_object_move_to_active(struct drm_i915_gem_object *obj, list_move_tail(&obj->ring_list, &ring->active_list); obj->last_rendering_seqno = seqno; - if (obj->fenced_gpu_access) { - struct drm_i915_fence_reg *reg; - - BUG_ON(obj->fence_reg == I915_FENCE_REG_NONE); + if (obj->fenced_gpu_access) { obj->last_fenced_seqno = seqno; obj->last_fenced_ring = ring; - reg = &dev_priv->fence_regs[obj->fence_reg]; - list_move_tail(®->lru_list, &dev_priv->mm.fence_list); + /* Bump MRU to take account of the delayed flush */ + if (obj->fence_reg != I915_FENCE_REG_NONE) { + struct drm_i915_fence_reg *reg; + + reg = &dev_priv->fence_regs[obj->fence_reg]; + list_move_tail(®->lru_list, + &dev_priv->mm.fence_list); + } } } @@ -1490,6 +1493,7 @@ i915_gem_object_move_off_active(struct drm_i915_gem_object *obj) { list_del_init(&obj->ring_list); obj->last_rendering_seqno = 0; + obj->last_fenced_seqno = 0; } static void @@ -1518,6 +1522,7 @@ i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj) BUG_ON(!list_empty(&obj->gpu_write_list)); BUG_ON(!obj->active); obj->ring = NULL; + obj->last_fenced_ring = NULL; i915_gem_object_move_off_active(obj); obj->fenced_gpu_access = false; @@ -3754,12 +3759,32 @@ void i915_gem_init_ppgtt(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; uint32_t pd_offset; struct intel_ring_buffer *ring; + struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt; + uint32_t __iomem *pd_addr; + uint32_t pd_entry; int i; if (!dev_priv->mm.aliasing_ppgtt) return; - pd_offset = dev_priv->mm.aliasing_ppgtt->pd_offset; + + pd_addr = dev_priv->mm.gtt->gtt + ppgtt->pd_offset/sizeof(uint32_t); + for (i = 0; i < ppgtt->num_pd_entries; i++) { + dma_addr_t pt_addr; + + if (dev_priv->mm.gtt->needs_dmar) + pt_addr = ppgtt->pt_dma_addr[i]; + else + pt_addr = page_to_phys(ppgtt->pt_pages[i]); + + pd_entry = GEN6_PDE_ADDR_ENCODE(pt_addr); + pd_entry |= GEN6_PDE_VALID; + + writel(pd_entry, pd_addr + i); + } + readl(pd_addr); + + pd_offset = ppgtt->pd_offset; pd_offset /= 64; /* in cachelines, */ pd_offset <<= 16; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 81687af00893..f51a696486cb 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -498,8 +498,8 @@ pin_and_fence_object(struct drm_i915_gem_object *obj, if (ret) goto err_unpin; } + obj->pending_fenced_gpu_access = true; } - obj->pending_fenced_gpu_access = need_fence; } entry->offset = obj->gtt_offset; diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 2eacd78bb93b..a135c61f4119 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -65,9 +65,7 @@ int i915_gem_init_aliasing_ppgtt(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct i915_hw_ppgtt *ppgtt; - uint32_t pd_entry; unsigned first_pd_entry_in_global_pt; - uint32_t __iomem *pd_addr; int i; int ret = -ENOMEM; @@ -100,7 +98,6 @@ int i915_gem_init_aliasing_ppgtt(struct drm_device *dev) goto err_pt_alloc; } - pd_addr = dev_priv->mm.gtt->gtt + first_pd_entry_in_global_pt; for (i = 0; i < ppgtt->num_pd_entries; i++) { dma_addr_t pt_addr; if (dev_priv->mm.gtt->needs_dmar) { @@ -117,13 +114,7 @@ int i915_gem_init_aliasing_ppgtt(struct drm_device *dev) ppgtt->pt_dma_addr[i] = pt_addr; } else pt_addr = page_to_phys(ppgtt->pt_pages[i]); - - pd_entry = GEN6_PDE_ADDR_ENCODE(pt_addr); - pd_entry |= GEN6_PDE_VALID; - - writel(pd_entry, pd_addr + i); } - readl(pd_addr); ppgtt->scratch_page_dma_addr = dev_priv->mm.gtt->scratch_page_dma; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 3886cf051bac..b4bb1ef77ddc 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2385,6 +2385,7 @@ #define PIPECONF_DISABLE 0 #define PIPECONF_DOUBLE_WIDE (1<<30) #define I965_PIPECONF_ACTIVE (1<<30) +#define PIPECONF_FRAME_START_DELAY_MASK (3<<27) #define PIPECONF_SINGLE_WIDE 0 #define PIPECONF_PIPE_UNLOCKED 0 #define PIPECONF_PIPE_LOCKED (1<<25) @@ -3727,6 +3728,9 @@ #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 +#define GEN6_UCGCTL1 0x9400 +# define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) + #define GEN6_UCGCTL2 0x9404 # define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 8168d8f8a634..b48fc2a8410c 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -24,6 +24,7 @@ * Eric Anholt <eric@anholt.net> * */ +#include <linux/dmi.h> #include <drm/drm_dp_helper.h> #include "drmP.h" #include "drm.h" @@ -621,6 +622,26 @@ init_vbt_defaults(struct drm_i915_private *dev_priv) dev_priv->edp.bpp = 18; } +static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG_KMS("Falling back to manually reading VBT from " + "VBIOS ROM for %s\n", + id->ident); + return 1; +} + +static const struct dmi_system_id intel_no_opregion_vbt[] = { + { + .callback = intel_no_opregion_vbt_callback, + .ident = "ThinkCentre A57", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "97027RG"), + }, + }, + { } +}; + /** * intel_parse_bios - find VBT and initialize settings from the BIOS * @dev: DRM device @@ -641,7 +662,7 @@ intel_parse_bios(struct drm_device *dev) init_vbt_defaults(dev_priv); /* XXX Should this validation be moved to intel_opregion.c? */ - if (dev_priv->opregion.vbt) { + if (!dmi_check_system(intel_no_opregion_vbt) && dev_priv->opregion.vbt) { struct vbt_header *vbt = dev_priv->opregion.vbt; if (memcmp(vbt->signature, "$VBT", 4) == 0) { DRM_DEBUG_KMS("Using VBT from OpRegion: %20s\n", diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d514719f65e2..bae38acf44dc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2245,6 +2245,33 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, } static int +intel_finish_fb(struct drm_framebuffer *old_fb) +{ + struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; + struct drm_i915_private *dev_priv = obj->base.dev->dev_private; + bool was_interruptible = dev_priv->mm.interruptible; + int ret; + + wait_event(dev_priv->pending_flip_queue, + atomic_read(&dev_priv->mm.wedged) || + atomic_read(&obj->pending_flip) == 0); + + /* Big Hammer, we also need to ensure that any pending + * MI_WAIT_FOR_EVENT inside a user batch buffer on the + * current scanout is retired before unpinning the old + * framebuffer. + * + * This should only fail upon a hung GPU, in which case we + * can safely continue. + */ + dev_priv->mm.interruptible = false; + ret = i915_gem_object_finish_gpu(obj); + dev_priv->mm.interruptible = was_interruptible; + + return ret; +} + +static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { @@ -2282,25 +2309,8 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - if (old_fb) { - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; - - wait_event(dev_priv->pending_flip_queue, - atomic_read(&dev_priv->mm.wedged) || - atomic_read(&obj->pending_flip) == 0); - - /* Big Hammer, we also need to ensure that any pending - * MI_WAIT_FOR_EVENT inside a user batch buffer on the - * current scanout is retired before unpinning the old - * framebuffer. - * - * This should only fail upon a hung GPU, in which case we - * can safely continue. - */ - ret = i915_gem_object_finish_gpu(obj); - (void) ret; - } + if (old_fb) + intel_finish_fb(old_fb); ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, LEAVE_ATOMIC_MODE_SET); @@ -3371,6 +3381,23 @@ static void intel_crtc_disable(struct drm_crtc *crtc) struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_device *dev = crtc->dev; + /* Flush any pending WAITs before we disable the pipe. Note that + * we need to drop the struct_mutex in order to acquire it again + * during the lowlevel dpms routines around a couple of the + * operations. It does not look trivial nor desirable to move + * that locking higher. So instead we leave a window for the + * submission of further commands on the fb before we can actually + * disable it. This race with userspace exists anyway, and we can + * only rely on the pipe being disabled by userspace after it + * receives the hotplug notification and has flushed any pending + * batches. + */ + if (crtc->fb) { + mutex_lock(&dev->struct_mutex); + intel_finish_fb(crtc->fb); + mutex_unlock(&dev->struct_mutex); + } + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane); assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe); @@ -5539,7 +5566,8 @@ void ironlake_init_pch_refclk(struct drm_device *dev) if (intel_panel_use_ssc(dev_priv) && can_ssc) { DRM_DEBUG_KMS("Using SSC on panel\n"); temp |= DREF_SSC1_ENABLE; - } + } else + temp &= ~DREF_SSC1_ENABLE; /* Get SSC going before enabling the outputs */ I915_WRITE(PCH_DREF_CONTROL, temp); @@ -7580,6 +7608,12 @@ static void intel_sanitize_modesetting(struct drm_device *dev, struct drm_i915_private *dev_priv = dev->dev_private; u32 reg, val; + /* Clear any frame start delays used for debugging left by the BIOS */ + for_each_pipe(pipe) { + reg = PIPECONF(pipe); + I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); + } + if (HAS_PCH_SPLIT(dev)) return; @@ -8215,7 +8249,7 @@ void intel_init_emon(struct drm_device *dev) dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK); } -static bool intel_enable_rc6(struct drm_device *dev) +static int intel_enable_rc6(struct drm_device *dev) { /* * Respect the kernel parameter if it is set @@ -8233,11 +8267,11 @@ static bool intel_enable_rc6(struct drm_device *dev) * Disable rc6 on Sandybridge */ if (INTEL_INFO(dev)->gen == 6) { - DRM_DEBUG_DRIVER("Sandybridge: RC6 disabled\n"); - return 0; + DRM_DEBUG_DRIVER("Sandybridge: deep RC6 disabled\n"); + return INTEL_RC6_ENABLE; } - DRM_DEBUG_DRIVER("RC6 enabled\n"); - return 1; + DRM_DEBUG_DRIVER("RC6 and deep RC6 enabled\n"); + return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE); } void gen6_enable_rps(struct drm_i915_private *dev_priv) @@ -8247,6 +8281,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) u32 pcu_mbox, rc6_mask = 0; u32 gtfifodbg; int cur_freq, min_freq, max_freq; + int rc6_mode; int i; /* Here begins a magic sequence of register writes to enable @@ -8284,9 +8319,20 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6p_THRESHOLD, 100000); I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ - if (intel_enable_rc6(dev_priv->dev)) - rc6_mask = GEN6_RC_CTL_RC6_ENABLE | - ((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0); + rc6_mode = intel_enable_rc6(dev_priv->dev); + if (rc6_mode & INTEL_RC6_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6_ENABLE; + + if (rc6_mode & INTEL_RC6p_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE; + + if (rc6_mode & INTEL_RC6pp_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE; + + DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n", + (rc6_mode & INTEL_RC6_ENABLE) ? "on" : "off", + (rc6_mode & INTEL_RC6p_ENABLE) ? "on" : "off", + (rc6_mode & INTEL_RC6pp_ENABLE) ? "on" : "off"); I915_WRITE(GEN6_RC_CONTROL, rc6_mask | @@ -8510,6 +8556,10 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + I915_WRITE(GEN6_UCGCTL1, + I915_READ(GEN6_UCGCTL1) | + GEN6_BLBUNIT_CLOCK_GATE_DISABLE); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock * gating disable must be set. Failure to set it results in * flickering pixels due to Z write ordering failures after diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 110552ff302c..4b637919f74f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -219,14 +219,38 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes) return (max_link_clock * max_lanes * 8) / 10; } +static bool +intel_dp_adjust_dithering(struct intel_dp *intel_dp, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); + int max_lanes = intel_dp_max_lane_count(intel_dp); + int max_rate, mode_rate; + + mode_rate = intel_dp_link_required(mode->clock, 24); + max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); + + if (mode_rate > max_rate) { + mode_rate = intel_dp_link_required(mode->clock, 18); + if (mode_rate > max_rate) + return false; + + if (adjusted_mode) + adjusted_mode->private_flags + |= INTEL_MODE_DP_FORCE_6BPC; + + return true; + } + + return true; +} + static int intel_dp_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { struct intel_dp *intel_dp = intel_attached_dp(connector); - int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); - int max_lanes = intel_dp_max_lane_count(intel_dp); - int max_rate, mode_rate; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay) @@ -236,16 +260,8 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_PANEL; } - mode_rate = intel_dp_link_required(mode->clock, 24); - max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); - - if (mode_rate > max_rate) { - mode_rate = intel_dp_link_required(mode->clock, 18); - if (mode_rate > max_rate) - return MODE_CLOCK_HIGH; - else - mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC; - } + if (!intel_dp_adjust_dithering(intel_dp, mode, NULL)) + return MODE_CLOCK_HIGH; if (mode->clock < 10000) return MODE_CLOCK_LOW; @@ -672,7 +688,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, int lane_count, clock; int max_lane_count = intel_dp_max_lane_count(intel_dp); int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; - int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24; + int bpp; static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { @@ -686,6 +702,11 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, mode->clock = intel_dp->panel_fixed_mode->clock; } + if (!intel_dp_adjust_dithering(intel_dp, mode, adjusted_mode)) + return false; + + bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24; + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 601c86e664af..8fdc95700218 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -390,7 +390,7 @@ int intel_setup_gmbus(struct drm_device *dev) bus->has_gpio = intel_gpio_setup(bus, i); /* XXX force bit banging until GMBUS is fully debugged */ - if (bus->has_gpio && IS_GEN2(dev)) + if (bus->has_gpio) bus->force_bit = true; } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index c5c0973af8a1..95db2e988227 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -755,6 +755,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_BOARD_NAME, "hp st5747"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "MSI Wind Box DC500", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7469"), + }, + }, { } /* terminating entry */ }; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index fc66af6a9448..f75806e5bff5 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -626,7 +626,7 @@ gen6_ring_get_seqno(struct intel_ring_buffer *ring) /* Workaround to force correct ordering between irq and seqno writes on * ivb (and maybe also on snb) by reading from a CS register (like * ACTHD) before reading the status page. */ - if (IS_GEN7(dev)) + if (IS_GEN6(dev) || IS_GEN7(dev)) intel_ring_get_active_head(ring); return intel_read_status_page(ring, I915_GEM_HWS_INDEX); } @@ -1038,7 +1038,7 @@ int intel_init_ring_buffer(struct drm_device *dev, * of the buffer. */ ring->effective_size = ring->size; - if (IS_I830(ring->dev)) + if (IS_I830(ring->dev) || IS_845G(ring->dev)) ring->effective_size -= 128; return 0; diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 7aa0450399a1..e90dfb625c42 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -95,7 +95,6 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, /* must disable */ sprctl |= SPRITE_TRICKLE_FEED_DISABLE; sprctl |= SPRITE_ENABLE; - sprctl |= SPRITE_DEST_KEY; /* Sizes are 0 based */ src_w--; @@ -411,6 +410,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, old_obj = intel_plane->obj; + src_w = src_w >> 16; + src_h = src_h >> 16; + /* Pipe must be running... */ if (!(I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE)) return -EINVAL; diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig index ca1639918f57..97a81260485a 100644 --- a/drivers/gpu/drm/nouveau/Kconfig +++ b/drivers/gpu/drm/nouveau/Kconfig @@ -13,6 +13,7 @@ config DRM_NOUVEAU select ACPI_VIDEO if ACPI && X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL && INPUT select ACPI_WMI if ACPI select MXM_WMI if ACPI + select POWER_SUPPLY help Choose this option for open-source nVidia support. diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 637afe71de56..80963d05b54a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -177,14 +177,15 @@ bios_shadow_pci(struct nvbios *bios) if (!pci_enable_rom(pdev)) { void __iomem *rom = pci_map_rom(pdev, &length); - if (rom) { + if (rom && length) { bios->data = kmalloc(length, GFP_KERNEL); if (bios->data) { memcpy_fromio(bios->data, rom, length); bios->length = length; } - pci_unmap_rom(pdev, rom); } + if (rom) + pci_unmap_rom(pdev, rom); pci_disable_rom(pdev); } diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c index 44e6416d4a33..846afb0bfef4 100644 --- a/drivers/gpu/drm/nouveau/nouveau_channel.c +++ b/drivers/gpu/drm/nouveau/nouveau_channel.c @@ -436,11 +436,11 @@ nouveau_ioctl_fifo_alloc(struct drm_device *dev, void *data, } if (dev_priv->card_type < NV_C0) { - init->subchan[0].handle = NvSw; - init->subchan[0].grclass = NV_SW; - init->nr_subchan = 1; - } else { - init->nr_subchan = 0; + init->subchan[0].handle = 0x00000000; + init->subchan[0].grclass = 0x0000; + init->subchan[1].handle = NvSw; + init->subchan[1].grclass = NV_SW; + init->nr_subchan = 2; } /* Named memory object area */ diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.h b/drivers/gpu/drm/nouveau/nouveau_dma.h index bcf0fd9e313e..23d4edf992b7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dma.h +++ b/drivers/gpu/drm/nouveau/nouveau_dma.h @@ -48,8 +48,8 @@ void nv50_dma_push(struct nouveau_channel *, struct nouveau_bo *, /* Hardcoded object assignments to subchannels (subchannel id). */ enum { - NvSubSw = 0, - NvSubM2MF = 1, + NvSubM2MF = 0, + NvSubSw = 1, NvSub2D = 2, NvSubCtxSurf2D = 2, NvSubGdiRect = 3, diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index a4886b36d0fa..c2a8511e855a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -642,7 +642,7 @@ nouveau_card_channel_init(struct drm_device *dev) OUT_RING (chan, chan->vram_handle); OUT_RING (chan, chan->gart_handle); } else - if (dev_priv->card_type <= NV_C0) { + if (dev_priv->card_type <= NV_D0) { ret = nouveau_gpuobj_gr_new(chan, 0x9039, 0x9039); if (ret) goto error; diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index d1bd239cd9e9..5ce9bf51a8de 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -1306,8 +1306,11 @@ struct atom_context *atom_parse(struct card_info *card, void *bios) int atom_asic_init(struct atom_context *ctx) { + struct radeon_device *rdev = ctx->card->dev->dev_private; int hwi = CU16(ctx->data_table + ATOM_DATA_FWI_PTR); uint32_t ps[16]; + int ret; + memset(ps, 0, 64); ps[0] = cpu_to_le32(CU32(hwi + ATOM_FWI_DEFSCLK_PTR)); @@ -1317,7 +1320,17 @@ int atom_asic_init(struct atom_context *ctx) if (!CU16(ctx->cmd_table + 4 + 2 * ATOM_CMD_INIT)) return 1; - return atom_execute_table(ctx, ATOM_CMD_INIT, ps); + ret = atom_execute_table(ctx, ATOM_CMD_INIT, ps); + if (ret) + return ret; + + memset(ps, 0, 64); + + if (rdev->family < CHIP_R600) { + if (CU16(ctx->cmd_table + 4 + 2 * ATOM_CMD_SPDFANCNTL)) + atom_execute_table(ctx, ATOM_CMD_SPDFANCNTL, ps); + } + return ret; } void atom_destroy(struct atom_context *ctx) diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h index 93cfe2086ba0..25fea631dad2 100644 --- a/drivers/gpu/drm/radeon/atom.h +++ b/drivers/gpu/drm/radeon/atom.h @@ -44,6 +44,7 @@ #define ATOM_CMD_SETSCLK 0x0A #define ATOM_CMD_SETMCLK 0x0B #define ATOM_CMD_SETPCLK 0x0C +#define ATOM_CMD_SPDFANCNTL 0x39 #define ATOM_DATA_FWI_PTR 0xC #define ATOM_DATA_IIO_PTR 0x32 diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index e607c4d7dd98..2d39f9977e00 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -230,6 +230,10 @@ atombios_dvo_setup(struct drm_encoder *encoder, int action) if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev)) return; + /* some R4xx chips have the wrong frev */ + if (rdev->family <= CHIP_RV410) + frev = 1; + switch (frev) { case 1: switch (crev) { diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 81801c176aa5..fe33d35dae8c 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2553,7 +2553,7 @@ static void r100_pll_errata_after_data(struct radeon_device *rdev) * or the chip could hang on a subsequent access */ if (rdev->pll_errata & CHIP_ERRATA_PLL_DELAY) { - udelay(5000); + mdelay(5); } /* This function is required to workaround a hardware bug in some (all?) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 391bd2636a80..de71243b591f 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2839,7 +2839,7 @@ void r600_rlc_stop(struct radeon_device *rdev) /* r7xx asics need to soft reset RLC before halting */ WREG32(SRBM_SOFT_RESET, SOFT_RESET_RLC); RREG32(SRBM_SOFT_RESET); - udelay(15000); + mdelay(15); WREG32(SRBM_SOFT_RESET, 0); RREG32(SRBM_SOFT_RESET); } diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c index 84c546250955..75ed17c96115 100644 --- a/drivers/gpu/drm/radeon/r600_cp.c +++ b/drivers/gpu/drm/radeon/r600_cp.c @@ -407,7 +407,7 @@ static void r600_cp_load_microcode(drm_radeon_private_t *dev_priv) RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP); RADEON_READ(R600_GRBM_SOFT_RESET); - DRM_UDELAY(15000); + mdelay(15); RADEON_WRITE(R600_GRBM_SOFT_RESET, 0); fw_data = (const __be32 *)dev_priv->me_fw->data; @@ -500,7 +500,7 @@ static void r700_cp_load_microcode(drm_radeon_private_t *dev_priv) RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP); RADEON_READ(R600_GRBM_SOFT_RESET); - DRM_UDELAY(15000); + mdelay(15); RADEON_WRITE(R600_GRBM_SOFT_RESET, 0); fw_data = (const __be32 *)dev_priv->pfp_fw->data; @@ -1797,7 +1797,7 @@ static void r600_cp_init_ring_buffer(struct drm_device *dev, RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP); RADEON_READ(R600_GRBM_SOFT_RESET); - DRM_UDELAY(15000); + mdelay(15); RADEON_WRITE(R600_GRBM_SOFT_RESET, 0); diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index 6ae0c75f016a..9c6b29a41927 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -633,7 +633,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp &= ~(R300_SCLK_FORCE_VAP); tmp |= RADEON_SCLK_FORCE_CP; WREG32_PLL(RADEON_SCLK_CNTL, tmp); - udelay(15000); + mdelay(15); tmp = RREG32_PLL(R300_SCLK_CNTL2); tmp &= ~(R300_SCLK_FORCE_TCL | @@ -651,12 +651,12 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp |= (RADEON_ENGIN_DYNCLK_MODE | (0x01 << RADEON_ACTIVE_HILO_LAT_SHIFT)); WREG32_PLL(RADEON_CLK_PWRMGT_CNTL, tmp); - udelay(15000); + mdelay(15); tmp = RREG32_PLL(RADEON_CLK_PIN_CNTL); tmp |= RADEON_SCLK_DYN_START_CNTL; WREG32_PLL(RADEON_CLK_PIN_CNTL, tmp); - udelay(15000); + mdelay(15); /* When DRI is enabled, setting DYN_STOP_LAT to zero can cause some R200 to lockup randomly, leave them as set by BIOS. @@ -696,7 +696,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp |= RADEON_SCLK_MORE_FORCEON; } WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp); - udelay(15000); + mdelay(15); } /* RV200::A11 A12, RV250::A11 A12 */ @@ -709,7 +709,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp |= RADEON_TCL_BYPASS_DISABLE; WREG32_PLL(RADEON_PLL_PWRMGT_CNTL, tmp); } - udelay(15000); + mdelay(15); /*enable dynamic mode for display clocks (PIXCLK and PIX2CLK) */ tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL); @@ -722,14 +722,14 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) RADEON_PIXCLK_TMDS_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - udelay(15000); + mdelay(15); tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL); tmp |= (RADEON_PIXCLK_ALWAYS_ONb | RADEON_PIXCLK_DAC_ALWAYS_ONb); WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp); - udelay(15000); + mdelay(15); } } else { /* Turn everything OFF (ForceON to everything) */ @@ -861,7 +861,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) } WREG32_PLL(RADEON_SCLK_CNTL, tmp); - udelay(16000); + mdelay(16); if ((rdev->family == CHIP_R300) || (rdev->family == CHIP_R350)) { @@ -870,7 +870,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) R300_SCLK_FORCE_GA | R300_SCLK_FORCE_CBA); WREG32_PLL(R300_SCLK_CNTL2, tmp); - udelay(16000); + mdelay(16); } if (rdev->flags & RADEON_IS_IGP) { @@ -878,7 +878,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp &= ~(RADEON_FORCEON_MCLKA | RADEON_FORCEON_YCLKA); WREG32_PLL(RADEON_MCLK_CNTL, tmp); - udelay(16000); + mdelay(16); } if ((rdev->family == CHIP_RV200) || @@ -887,7 +887,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL); tmp |= RADEON_SCLK_MORE_FORCEON; WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp); - udelay(16000); + mdelay(16); } tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL); @@ -900,7 +900,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) RADEON_PIXCLK_TMDS_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - udelay(16000); + mdelay(16); tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL); tmp &= ~(RADEON_PIXCLK_ALWAYS_ONb | diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 81fc100be7e1..2cad9fde92fc 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -2845,7 +2845,7 @@ bool radeon_combios_external_tmds_setup(struct drm_encoder *encoder) case 4: val = RBIOS16(index); index += 2; - udelay(val * 1000); + mdelay(val); break; case 6: slave_addr = id & 0xff; @@ -3044,7 +3044,7 @@ static void combios_parse_pll_table(struct drm_device *dev, uint16_t offset) udelay(150); break; case 2: - udelay(1000); + mdelay(1); break; case 3: while (tmp--) { @@ -3075,13 +3075,13 @@ static void combios_parse_pll_table(struct drm_device *dev, uint16_t offset) /*mclk_cntl |= 0x00001111;*//* ??? */ WREG32_PLL(RADEON_MCLK_CNTL, mclk_cntl); - udelay(10000); + mdelay(10); #endif WREG32_PLL (RADEON_CLK_PWRMGT_CNTL, tmp & ~RADEON_CG_NO1_DEBUG_0); - udelay(10000); + mdelay(10); } break; default: diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c index 85bcfc8923a7..3edec1c198e3 100644 --- a/drivers/gpu/drm/radeon/radeon_i2c.c +++ b/drivers/gpu/drm/radeon/radeon_i2c.c @@ -900,6 +900,10 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev, struct radeon_i2c_chan *i2c; int ret; + /* don't add the mm_i2c bus unless hw_i2c is enabled */ + if (rec->mm_i2c && (radeon_hw_i2c == 0)) + return NULL; + i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL); if (i2c == NULL) return NULL; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 2f46e0c8df53..42db254f6bb0 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -88,7 +88,7 @@ static void radeon_legacy_lvds_update(struct drm_encoder *encoder, int mode) lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL); lvds_pll_cntl |= RADEON_LVDS_PLL_EN; WREG32(RADEON_LVDS_PLL_CNTL, lvds_pll_cntl); - udelay(1000); + mdelay(1); lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL); lvds_pll_cntl &= ~RADEON_LVDS_PLL_RESET; @@ -101,7 +101,7 @@ static void radeon_legacy_lvds_update(struct drm_encoder *encoder, int mode) (backlight_level << RADEON_LVDS_BL_MOD_LEVEL_SHIFT)); if (is_mac) lvds_gen_cntl |= RADEON_LVDS_BL_MOD_EN; - udelay(panel_pwr_delay * 1000); + mdelay(panel_pwr_delay); WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); break; case DRM_MODE_DPMS_STANDBY: @@ -118,10 +118,10 @@ static void radeon_legacy_lvds_update(struct drm_encoder *encoder, int mode) WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON); } - udelay(panel_pwr_delay * 1000); + mdelay(panel_pwr_delay); WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); - udelay(panel_pwr_delay * 1000); + mdelay(panel_pwr_delay); break; } @@ -656,7 +656,7 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc WREG32(RADEON_DAC_MACRO_CNTL, tmp); - udelay(2000); + mdelay(2); if (RREG32(RADEON_DAC_CNTL) & RADEON_DAC_CMP_OUTPUT) found = connector_status_connected; @@ -1499,7 +1499,7 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder tmp = dac_cntl2 | RADEON_DAC2_DAC2_CLK_SEL | RADEON_DAC2_CMP_EN; WREG32(RADEON_DAC_CNTL2, tmp); - udelay(10000); + mdelay(10); if (ASIC_IS_R300(rdev)) { if (RREG32(RADEON_DAC_CNTL2) & RADEON_DAC2_CMP_OUT_B) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 6f70158d34e4..df6a4dbd93f8 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -241,7 +241,8 @@ int radeon_bo_pin_restricted(struct radeon_bo *bo, u32 domain, u64 max_offset, domain_start = bo->rdev->mc.vram_start; else domain_start = bo->rdev->mc.gtt_start; - WARN_ON_ONCE((*gpu_addr - domain_start) > max_offset); + WARN_ON_ONCE(max_offset < + (radeon_bo_gpu_offset(bo) - domain_start)); } return 0; diff --git a/drivers/gpu/drm/savage/savage_state.c b/drivers/gpu/drm/savage/savage_state.c index 031aaaf79ac2..b6d8608375cd 100644 --- a/drivers/gpu/drm/savage/savage_state.c +++ b/drivers/gpu/drm/savage/savage_state.c @@ -988,7 +988,7 @@ int savage_bci_cmdbuf(struct drm_device *dev, void *data, struct drm_file *file_ * for locking on FreeBSD. */ if (cmdbuf->size) { - kcmd_addr = kmalloc(cmdbuf->size * 8, GFP_KERNEL); + kcmd_addr = kmalloc_array(cmdbuf->size, 8, GFP_KERNEL); if (kcmd_addr == NULL) return -ENOMEM; @@ -1015,8 +1015,8 @@ int savage_bci_cmdbuf(struct drm_device *dev, void *data, struct drm_file *file_ cmdbuf->vb_addr = kvb_addr; } if (cmdbuf->nbox) { - kbox_addr = kmalloc(cmdbuf->nbox * sizeof(struct drm_clip_rect), - GFP_KERNEL); + kbox_addr = kmalloc_array(cmdbuf->nbox, sizeof(struct drm_clip_rect), + GFP_KERNEL); if (kbox_addr == NULL) { ret = -ENOMEM; goto done; diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c index 5340c5f3987b..53673907a6a0 100644 --- a/drivers/gpu/drm/udl/udl_drv.c +++ b/drivers/gpu/drm/udl/udl_drv.c @@ -47,7 +47,7 @@ static struct vm_operations_struct udl_gem_vm_ops = { static const struct file_operations udl_driver_fops = { .owner = THIS_MODULE, .open = drm_open, - .mmap = drm_gem_mmap, + .mmap = udl_drm_gem_mmap, .poll = drm_poll, .read = drm_read, .unlocked_ioctl = drm_ioctl, diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h index 1612954a5bc4..96820d03a303 100644 --- a/drivers/gpu/drm/udl/udl_drv.h +++ b/drivers/gpu/drm/udl/udl_drv.h @@ -121,6 +121,7 @@ struct udl_gem_object *udl_gem_alloc_object(struct drm_device *dev, int udl_gem_vmap(struct udl_gem_object *obj); void udl_gem_vunmap(struct udl_gem_object *obj); +int udl_drm_gem_mmap(struct file *filp, struct vm_area_struct *vma); int udl_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); int udl_handle_damage(struct udl_framebuffer *fb, int x, int y, diff --git a/drivers/gpu/drm/udl/udl_gem.c b/drivers/gpu/drm/udl/udl_gem.c index 852642dc1187..92f19ef329b0 100644 --- a/drivers/gpu/drm/udl/udl_gem.c +++ b/drivers/gpu/drm/udl/udl_gem.c @@ -71,6 +71,20 @@ int udl_dumb_destroy(struct drm_file *file, struct drm_device *dev, return drm_gem_handle_delete(file, handle); } +int udl_drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) +{ + int ret; + + ret = drm_gem_mmap(filp, vma); + if (ret) + return ret; + + vma->vm_flags &= ~VM_PFNMAP; + vma->vm_flags |= VM_MIXEDMAP; + + return ret; +} + int udl_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { struct udl_gem_object *obj = to_udl_bo(vma->vm_private_data); diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 12f9777c385d..45c3433f7986 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -1525,12 +1525,6 @@ static const struct file_operations picolcd_debug_reset_fops = { /* * The "eeprom" file */ -static int picolcd_debug_eeprom_open(struct inode *i, struct file *f) -{ - f->private_data = i->i_private; - return 0; -} - static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, size_t s, loff_t *off) { @@ -1618,7 +1612,7 @@ static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, */ static const struct file_operations picolcd_debug_eeprom_fops = { .owner = THIS_MODULE, - .open = picolcd_debug_eeprom_open, + .open = simple_open, .read = picolcd_debug_eeprom_read, .write = picolcd_debug_eeprom_write, .llseek = generic_file_llseek, @@ -1627,12 +1621,6 @@ static const struct file_operations picolcd_debug_eeprom_fops = { /* * The "flash" file */ -static int picolcd_debug_flash_open(struct inode *i, struct file *f) -{ - f->private_data = i->i_private; - return 0; -} - /* record a flash address to buf (bounds check to be done by caller) */ static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) { @@ -1817,7 +1805,7 @@ static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, */ static const struct file_operations picolcd_debug_flash_fops = { .owner = THIS_MODULE, - .open = picolcd_debug_flash_open, + .open = simple_open, .read = picolcd_debug_flash_read, .write = picolcd_debug_flash_write, .llseek = generic_file_llseek, diff --git a/drivers/hid/hid-wiimote-debug.c b/drivers/hid/hid-wiimote-debug.c index 17dabc1f339e..eec329197c16 100644 --- a/drivers/hid/hid-wiimote-debug.c +++ b/drivers/hid/hid-wiimote-debug.c @@ -23,12 +23,6 @@ struct wiimote_debug { struct dentry *drm; }; -static int wiidebug_eeprom_open(struct inode *i, struct file *f) -{ - f->private_data = i->i_private; - return 0; -} - static ssize_t wiidebug_eeprom_read(struct file *f, char __user *u, size_t s, loff_t *off) { @@ -83,7 +77,7 @@ static ssize_t wiidebug_eeprom_read(struct file *f, char __user *u, size_t s, static const struct file_operations wiidebug_eeprom_fops = { .owner = THIS_MODULE, - .open = wiidebug_eeprom_open, + .open = simple_open, .read = wiidebug_eeprom_read, .llseek = generic_file_llseek, }; diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig new file mode 100644 index 000000000000..d94e38dd80c7 --- /dev/null +++ b/drivers/hsi/Kconfig @@ -0,0 +1,19 @@ +# +# HSI driver configuration +# +menuconfig HSI + tristate "HSI support" + ---help--- + The "High speed synchronous Serial Interface" is + synchronous serial interface used mainly to connect + application engines and cellular modems. + +if HSI + +config HSI_BOARDINFO + bool + default y + +source "drivers/hsi/clients/Kconfig" + +endif # HSI diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile new file mode 100644 index 000000000000..9d5d33f90de2 --- /dev/null +++ b/drivers/hsi/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for HSI +# +obj-$(CONFIG_HSI_BOARDINFO) += hsi_boardinfo.o +obj-$(CONFIG_HSI) += hsi.o +obj-y += clients/ diff --git a/drivers/hsi/clients/Kconfig b/drivers/hsi/clients/Kconfig new file mode 100644 index 000000000000..3bacd275f479 --- /dev/null +++ b/drivers/hsi/clients/Kconfig @@ -0,0 +1,13 @@ +# +# HSI clients configuration +# + +comment "HSI clients" + +config HSI_CHAR + tristate "HSI/SSI character driver" + depends on HSI + ---help--- + If you say Y here, you will enable the HSI/SSI character driver. + This driver provides a simple character device interface for + serial communication with the cellular modem over HSI/SSI bus. diff --git a/drivers/hsi/clients/Makefile b/drivers/hsi/clients/Makefile new file mode 100644 index 000000000000..327c0e27c8b0 --- /dev/null +++ b/drivers/hsi/clients/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for HSI clients +# + +obj-$(CONFIG_HSI_CHAR) += hsi_char.o diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c new file mode 100644 index 000000000000..88a050df2389 --- /dev/null +++ b/drivers/hsi/clients/hsi_char.c @@ -0,0 +1,802 @@ +/* + * HSI character device driver, implements the character device + * interface. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos <andras.domokos@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/atomic.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/slab.h> +#include <linux/kmemleak.h> +#include <linux/ioctl.h> +#include <linux/wait.h> +#include <linux/fs.h> +#include <linux/sched.h> +#include <linux/device.h> +#include <linux/cdev.h> +#include <linux/uaccess.h> +#include <linux/scatterlist.h> +#include <linux/stat.h> +#include <linux/hsi/hsi.h> +#include <linux/hsi/hsi_char.h> + +#define HSC_DEVS 16 /* Num of channels */ +#define HSC_MSGS 4 + +#define HSC_RXBREAK 0 + +#define HSC_ID_BITS 6 +#define HSC_PORT_ID_BITS 4 +#define HSC_ID_MASK 3 +#define HSC_PORT_ID_MASK 3 +#define HSC_CH_MASK 0xf + +/* + * We support up to 4 controllers that can have up to 4 + * ports, which should currently be more than enough. + */ +#define HSC_BASEMINOR(id, port_id) \ + ((((id) & HSC_ID_MASK) << HSC_ID_BITS) | \ + (((port_id) & HSC_PORT_ID_MASK) << HSC_PORT_ID_BITS)) + +enum { + HSC_CH_OPEN, + HSC_CH_READ, + HSC_CH_WRITE, + HSC_CH_WLINE, +}; + +enum { + HSC_RX, + HSC_TX, +}; + +struct hsc_client_data; +/** + * struct hsc_channel - hsi_char internal channel data + * @ch: channel number + * @flags: Keeps state of the channel (open/close, reading, writing) + * @free_msgs_list: List of free HSI messages/requests + * @rx_msgs_queue: List of pending RX requests + * @tx_msgs_queue: List of pending TX requests + * @lock: Serialize access to the lists + * @cl: reference to the associated hsi_client + * @cl_data: reference to the client data that this channels belongs to + * @rx_wait: RX requests wait queue + * @tx_wait: TX requests wait queue + */ +struct hsc_channel { + unsigned int ch; + unsigned long flags; + struct list_head free_msgs_list; + struct list_head rx_msgs_queue; + struct list_head tx_msgs_queue; + spinlock_t lock; + struct hsi_client *cl; + struct hsc_client_data *cl_data; + wait_queue_head_t rx_wait; + wait_queue_head_t tx_wait; +}; + +/** + * struct hsc_client_data - hsi_char internal client data + * @cdev: Characther device associated to the hsi_client + * @lock: Lock to serialize open/close access + * @flags: Keeps track of port state (rx hwbreak armed) + * @usecnt: Use count for claiming the HSI port (mutex protected) + * @cl: Referece to the HSI client + * @channels: Array of channels accessible by the client + */ +struct hsc_client_data { + struct cdev cdev; + struct mutex lock; + unsigned long flags; + unsigned int usecnt; + struct hsi_client *cl; + struct hsc_channel channels[HSC_DEVS]; +}; + +/* Stores the major number dynamically allocated for hsi_char */ +static unsigned int hsc_major; +/* Maximum buffer size that hsi_char will accept from userspace */ +static unsigned int max_data_size = 0x1000; +module_param(max_data_size, uint, S_IRUSR | S_IWUSR); +MODULE_PARM_DESC(max_data_size, "max read/write data size [4,8..65536] (^2)"); + +static void hsc_add_tail(struct hsc_channel *channel, struct hsi_msg *msg, + struct list_head *queue) +{ + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + list_add_tail(&msg->link, queue); + spin_unlock_irqrestore(&channel->lock, flags); +} + +static struct hsi_msg *hsc_get_first_msg(struct hsc_channel *channel, + struct list_head *queue) +{ + struct hsi_msg *msg = NULL; + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + + if (list_empty(queue)) + goto out; + + msg = list_first_entry(queue, struct hsi_msg, link); + list_del(&msg->link); +out: + spin_unlock_irqrestore(&channel->lock, flags); + + return msg; +} + +static inline void hsc_msg_free(struct hsi_msg *msg) +{ + kfree(sg_virt(msg->sgt.sgl)); + hsi_free_msg(msg); +} + +static void hsc_free_list(struct list_head *list) +{ + struct hsi_msg *msg, *tmp; + + list_for_each_entry_safe(msg, tmp, list, link) { + list_del(&msg->link); + hsc_msg_free(msg); + } +} + +static void hsc_reset_list(struct hsc_channel *channel, struct list_head *l) +{ + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&channel->lock, flags); + list_splice_init(l, &list); + spin_unlock_irqrestore(&channel->lock, flags); + + hsc_free_list(&list); +} + +static inline struct hsi_msg *hsc_msg_alloc(unsigned int alloc_size) +{ + struct hsi_msg *msg; + void *buf; + + msg = hsi_alloc_msg(1, GFP_KERNEL); + if (!msg) + goto out; + buf = kmalloc(alloc_size, GFP_KERNEL); + if (!buf) { + hsi_free_msg(msg); + goto out; + } + sg_init_one(msg->sgt.sgl, buf, alloc_size); + /* Ignore false positive, due to sg pointer handling */ + kmemleak_ignore(buf); + + return msg; +out: + return NULL; +} + +static inline int hsc_msgs_alloc(struct hsc_channel *channel) +{ + struct hsi_msg *msg; + int i; + + for (i = 0; i < HSC_MSGS; i++) { + msg = hsc_msg_alloc(max_data_size); + if (!msg) + goto out; + msg->channel = channel->ch; + list_add_tail(&msg->link, &channel->free_msgs_list); + } + + return 0; +out: + hsc_free_list(&channel->free_msgs_list); + + return -ENOMEM; +} + +static inline unsigned int hsc_msg_len_get(struct hsi_msg *msg) +{ + return msg->sgt.sgl->length; +} + +static inline void hsc_msg_len_set(struct hsi_msg *msg, unsigned int len) +{ + msg->sgt.sgl->length = len; +} + +static void hsc_rx_completed(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels + msg->channel; + + if (test_bit(HSC_CH_READ, &channel->flags)) { + hsc_add_tail(channel, msg, &channel->rx_msgs_queue); + wake_up(&channel->rx_wait); + } else { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +} + +static void hsc_rx_msg_destructor(struct hsi_msg *msg) +{ + msg->status = HSI_STATUS_ERROR; + hsc_msg_len_set(msg, 0); + hsc_rx_completed(msg); +} + +static void hsc_tx_completed(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels + msg->channel; + + if (test_bit(HSC_CH_WRITE, &channel->flags)) { + hsc_add_tail(channel, msg, &channel->tx_msgs_queue); + wake_up(&channel->tx_wait); + } else { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +} + +static void hsc_tx_msg_destructor(struct hsi_msg *msg) +{ + msg->status = HSI_STATUS_ERROR; + hsc_msg_len_set(msg, 0); + hsc_tx_completed(msg); +} + +static void hsc_break_req_destructor(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + + hsi_free_msg(msg); + clear_bit(HSC_RXBREAK, &cl_data->flags); +} + +static void hsc_break_received(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels; + int i, ret; + + /* Broadcast HWBREAK on all channels */ + for (i = 0; i < HSC_DEVS; i++, channel++) { + struct hsi_msg *msg2; + + if (!test_bit(HSC_CH_READ, &channel->flags)) + continue; + msg2 = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg2) + continue; + clear_bit(HSC_CH_READ, &channel->flags); + hsc_msg_len_set(msg2, 0); + msg2->status = HSI_STATUS_COMPLETED; + hsc_add_tail(channel, msg2, &channel->rx_msgs_queue); + wake_up(&channel->rx_wait); + } + hsi_flush(msg->cl); + ret = hsi_async_read(msg->cl, msg); + if (ret < 0) + hsc_break_req_destructor(msg); +} + +static int hsc_break_request(struct hsi_client *cl) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(cl); + struct hsi_msg *msg; + int ret; + + if (test_and_set_bit(HSC_RXBREAK, &cl_data->flags)) + return -EBUSY; + + msg = hsi_alloc_msg(0, GFP_KERNEL); + if (!msg) { + clear_bit(HSC_RXBREAK, &cl_data->flags); + return -ENOMEM; + } + msg->break_frame = 1; + msg->complete = hsc_break_received; + msg->destructor = hsc_break_req_destructor; + ret = hsi_async_read(cl, msg); + if (ret < 0) + hsc_break_req_destructor(msg); + + return ret; +} + +static int hsc_break_send(struct hsi_client *cl) +{ + struct hsi_msg *msg; + int ret; + + msg = hsi_alloc_msg(0, GFP_ATOMIC); + if (!msg) + return -ENOMEM; + msg->break_frame = 1; + msg->complete = hsi_free_msg; + msg->destructor = hsi_free_msg; + ret = hsi_async_write(cl, msg); + if (ret < 0) + hsi_free_msg(msg); + + return ret; +} + +static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc) +{ + struct hsi_config tmp; + int ret; + + if ((rxc->mode != HSI_MODE_STREAM) && (rxc->mode != HSI_MODE_FRAME)) + return -EINVAL; + if ((rxc->channels == 0) || (rxc->channels > HSC_DEVS)) + return -EINVAL; + if (rxc->channels & (rxc->channels - 1)) + return -EINVAL; + if ((rxc->flow != HSI_FLOW_SYNC) && (rxc->flow != HSI_FLOW_PIPE)) + return -EINVAL; + tmp = cl->rx_cfg; + cl->rx_cfg.mode = rxc->mode; + cl->rx_cfg.channels = rxc->channels; + cl->rx_cfg.flow = rxc->flow; + ret = hsi_setup(cl); + if (ret < 0) { + cl->rx_cfg = tmp; + return ret; + } + if (rxc->mode == HSI_MODE_FRAME) + hsc_break_request(cl); + + return ret; +} + +static inline void hsc_rx_get(struct hsi_client *cl, struct hsc_rx_config *rxc) +{ + rxc->mode = cl->rx_cfg.mode; + rxc->channels = cl->rx_cfg.channels; + rxc->flow = cl->rx_cfg.flow; +} + +static int hsc_tx_set(struct hsi_client *cl, struct hsc_tx_config *txc) +{ + struct hsi_config tmp; + int ret; + + if ((txc->mode != HSI_MODE_STREAM) && (txc->mode != HSI_MODE_FRAME)) + return -EINVAL; + if ((txc->channels == 0) || (txc->channels > HSC_DEVS)) + return -EINVAL; + if (txc->channels & (txc->channels - 1)) + return -EINVAL; + if ((txc->arb_mode != HSI_ARB_RR) && (txc->arb_mode != HSI_ARB_PRIO)) + return -EINVAL; + tmp = cl->tx_cfg; + cl->tx_cfg.mode = txc->mode; + cl->tx_cfg.channels = txc->channels; + cl->tx_cfg.speed = txc->speed; + cl->tx_cfg.arb_mode = txc->arb_mode; + ret = hsi_setup(cl); + if (ret < 0) { + cl->tx_cfg = tmp; + return ret; + } + + return ret; +} + +static inline void hsc_tx_get(struct hsi_client *cl, struct hsc_tx_config *txc) +{ + txc->mode = cl->tx_cfg.mode; + txc->channels = cl->tx_cfg.channels; + txc->speed = cl->tx_cfg.speed; + txc->arb_mode = cl->tx_cfg.arb_mode; +} + +static ssize_t hsc_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos __maybe_unused) +{ + struct hsc_channel *channel = file->private_data; + struct hsi_msg *msg; + ssize_t ret; + + if (len == 0) + return 0; + if (!IS_ALIGNED(len, sizeof(u32))) + return -EINVAL; + if (len > max_data_size) + len = max_data_size; + if (channel->ch >= channel->cl->rx_cfg.channels) + return -ECHRNG; + if (test_and_set_bit(HSC_CH_READ, &channel->flags)) + return -EBUSY; + msg = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg) { + ret = -ENOSPC; + goto out; + } + hsc_msg_len_set(msg, len); + msg->complete = hsc_rx_completed; + msg->destructor = hsc_rx_msg_destructor; + ret = hsi_async_read(channel->cl, msg); + if (ret < 0) { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + goto out; + } + + ret = wait_event_interruptible(channel->rx_wait, + !list_empty(&channel->rx_msgs_queue)); + if (ret < 0) { + clear_bit(HSC_CH_READ, &channel->flags); + hsi_flush(channel->cl); + return -EINTR; + } + + msg = hsc_get_first_msg(channel, &channel->rx_msgs_queue); + if (msg) { + if (msg->status != HSI_STATUS_ERROR) { + ret = copy_to_user((void __user *)buf, + sg_virt(msg->sgt.sgl), hsc_msg_len_get(msg)); + if (ret) + ret = -EFAULT; + else + ret = hsc_msg_len_get(msg); + } else { + ret = -EIO; + } + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +out: + clear_bit(HSC_CH_READ, &channel->flags); + + return ret; +} + +static ssize_t hsc_write(struct file *file, const char __user *buf, size_t len, + loff_t *ppos __maybe_unused) +{ + struct hsc_channel *channel = file->private_data; + struct hsi_msg *msg; + ssize_t ret; + + if ((len == 0) || !IS_ALIGNED(len, sizeof(u32))) + return -EINVAL; + if (len > max_data_size) + len = max_data_size; + if (channel->ch >= channel->cl->tx_cfg.channels) + return -ECHRNG; + if (test_and_set_bit(HSC_CH_WRITE, &channel->flags)) + return -EBUSY; + msg = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg) { + clear_bit(HSC_CH_WRITE, &channel->flags); + return -ENOSPC; + } + if (copy_from_user(sg_virt(msg->sgt.sgl), (void __user *)buf, len)) { + ret = -EFAULT; + goto out; + } + hsc_msg_len_set(msg, len); + msg->complete = hsc_tx_completed; + msg->destructor = hsc_tx_msg_destructor; + ret = hsi_async_write(channel->cl, msg); + if (ret < 0) + goto out; + + ret = wait_event_interruptible(channel->tx_wait, + !list_empty(&channel->tx_msgs_queue)); + if (ret < 0) { + clear_bit(HSC_CH_WRITE, &channel->flags); + hsi_flush(channel->cl); + return -EINTR; + } + + msg = hsc_get_first_msg(channel, &channel->tx_msgs_queue); + if (msg) { + if (msg->status == HSI_STATUS_ERROR) + ret = -EIO; + else + ret = hsc_msg_len_get(msg); + + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +out: + clear_bit(HSC_CH_WRITE, &channel->flags); + + return ret; +} + +static long hsc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct hsc_channel *channel = file->private_data; + unsigned int state; + struct hsc_rx_config rxc; + struct hsc_tx_config txc; + long ret = 0; + + switch (cmd) { + case HSC_RESET: + hsi_flush(channel->cl); + break; + case HSC_SET_PM: + if (copy_from_user(&state, (void __user *)arg, sizeof(state))) + return -EFAULT; + if (state == HSC_PM_DISABLE) { + if (test_and_set_bit(HSC_CH_WLINE, &channel->flags)) + return -EINVAL; + ret = hsi_start_tx(channel->cl); + } else if (state == HSC_PM_ENABLE) { + if (!test_and_clear_bit(HSC_CH_WLINE, &channel->flags)) + return -EINVAL; + ret = hsi_stop_tx(channel->cl); + } else { + ret = -EINVAL; + } + break; + case HSC_SEND_BREAK: + return hsc_break_send(channel->cl); + case HSC_SET_RX: + if (copy_from_user(&rxc, (void __user *)arg, sizeof(rxc))) + return -EFAULT; + return hsc_rx_set(channel->cl, &rxc); + case HSC_GET_RX: + hsc_rx_get(channel->cl, &rxc); + if (copy_to_user((void __user *)arg, &rxc, sizeof(rxc))) + return -EFAULT; + break; + case HSC_SET_TX: + if (copy_from_user(&txc, (void __user *)arg, sizeof(txc))) + return -EFAULT; + return hsc_tx_set(channel->cl, &txc); + case HSC_GET_TX: + hsc_tx_get(channel->cl, &txc); + if (copy_to_user((void __user *)arg, &txc, sizeof(txc))) + return -EFAULT; + break; + default: + return -ENOIOCTLCMD; + } + + return ret; +} + +static inline void __hsc_port_release(struct hsc_client_data *cl_data) +{ + BUG_ON(cl_data->usecnt == 0); + + if (--cl_data->usecnt == 0) { + hsi_flush(cl_data->cl); + hsi_release_port(cl_data->cl); + } +} + +static int hsc_open(struct inode *inode, struct file *file) +{ + struct hsc_client_data *cl_data; + struct hsc_channel *channel; + int ret = 0; + + pr_debug("open, minor = %d\n", iminor(inode)); + + cl_data = container_of(inode->i_cdev, struct hsc_client_data, cdev); + mutex_lock(&cl_data->lock); + channel = cl_data->channels + (iminor(inode) & HSC_CH_MASK); + + if (test_and_set_bit(HSC_CH_OPEN, &channel->flags)) { + ret = -EBUSY; + goto out; + } + /* + * Check if we have already claimed the port associated to the HSI + * client. If not then try to claim it, else increase its refcount + */ + if (cl_data->usecnt == 0) { + ret = hsi_claim_port(cl_data->cl, 0); + if (ret < 0) + goto out; + hsi_setup(cl_data->cl); + } + cl_data->usecnt++; + + ret = hsc_msgs_alloc(channel); + if (ret < 0) { + __hsc_port_release(cl_data); + goto out; + } + + file->private_data = channel; + mutex_unlock(&cl_data->lock); + + return ret; +out: + mutex_unlock(&cl_data->lock); + + return ret; +} + +static int hsc_release(struct inode *inode __maybe_unused, struct file *file) +{ + struct hsc_channel *channel = file->private_data; + struct hsc_client_data *cl_data = channel->cl_data; + + mutex_lock(&cl_data->lock); + file->private_data = NULL; + if (test_and_clear_bit(HSC_CH_WLINE, &channel->flags)) + hsi_stop_tx(channel->cl); + __hsc_port_release(cl_data); + hsc_reset_list(channel, &channel->rx_msgs_queue); + hsc_reset_list(channel, &channel->tx_msgs_queue); + hsc_reset_list(channel, &channel->free_msgs_list); + clear_bit(HSC_CH_READ, &channel->flags); + clear_bit(HSC_CH_WRITE, &channel->flags); + clear_bit(HSC_CH_OPEN, &channel->flags); + wake_up(&channel->rx_wait); + wake_up(&channel->tx_wait); + mutex_unlock(&cl_data->lock); + + return 0; +} + +static const struct file_operations hsc_fops = { + .owner = THIS_MODULE, + .read = hsc_read, + .write = hsc_write, + .unlocked_ioctl = hsc_ioctl, + .open = hsc_open, + .release = hsc_release, +}; + +static void __devinit hsc_channel_init(struct hsc_channel *channel) +{ + init_waitqueue_head(&channel->rx_wait); + init_waitqueue_head(&channel->tx_wait); + spin_lock_init(&channel->lock); + INIT_LIST_HEAD(&channel->free_msgs_list); + INIT_LIST_HEAD(&channel->rx_msgs_queue); + INIT_LIST_HEAD(&channel->tx_msgs_queue); +} + +static int __devinit hsc_probe(struct device *dev) +{ + const char devname[] = "hsi_char"; + struct hsc_client_data *cl_data; + struct hsc_channel *channel; + struct hsi_client *cl = to_hsi_client(dev); + unsigned int hsc_baseminor; + dev_t hsc_dev; + int ret; + int i; + + cl_data = kzalloc(sizeof(*cl_data), GFP_KERNEL); + if (!cl_data) { + dev_err(dev, "Could not allocate hsc_client_data\n"); + return -ENOMEM; + } + hsc_baseminor = HSC_BASEMINOR(hsi_id(cl), hsi_port_id(cl)); + if (!hsc_major) { + ret = alloc_chrdev_region(&hsc_dev, hsc_baseminor, + HSC_DEVS, devname); + if (ret > 0) + hsc_major = MAJOR(hsc_dev); + } else { + hsc_dev = MKDEV(hsc_major, hsc_baseminor); + ret = register_chrdev_region(hsc_dev, HSC_DEVS, devname); + } + if (ret < 0) { + dev_err(dev, "Device %s allocation failed %d\n", + hsc_major ? "minor" : "major", ret); + goto out1; + } + mutex_init(&cl_data->lock); + hsi_client_set_drvdata(cl, cl_data); + cdev_init(&cl_data->cdev, &hsc_fops); + cl_data->cdev.owner = THIS_MODULE; + cl_data->cl = cl; + for (i = 0, channel = cl_data->channels; i < HSC_DEVS; i++, channel++) { + hsc_channel_init(channel); + channel->ch = i; + channel->cl = cl; + channel->cl_data = cl_data; + } + + /* 1 hsi client -> N char devices (one for each channel) */ + ret = cdev_add(&cl_data->cdev, hsc_dev, HSC_DEVS); + if (ret) { + dev_err(dev, "Could not add char device %d\n", ret); + goto out2; + } + + return 0; +out2: + unregister_chrdev_region(hsc_dev, HSC_DEVS); +out1: + kfree(cl_data); + + return ret; +} + +static int __devexit hsc_remove(struct device *dev) +{ + struct hsi_client *cl = to_hsi_client(dev); + struct hsc_client_data *cl_data = hsi_client_drvdata(cl); + dev_t hsc_dev = cl_data->cdev.dev; + + cdev_del(&cl_data->cdev); + unregister_chrdev_region(hsc_dev, HSC_DEVS); + hsi_client_set_drvdata(cl, NULL); + kfree(cl_data); + + return 0; +} + +static struct hsi_client_driver hsc_driver = { + .driver = { + .name = "hsi_char", + .owner = THIS_MODULE, + .probe = hsc_probe, + .remove = __devexit_p(hsc_remove), + }, +}; + +static int __init hsc_init(void) +{ + int ret; + + if ((max_data_size < 4) || (max_data_size > 0x10000) || + (max_data_size & (max_data_size - 1))) { + pr_err("Invalid max read/write data size"); + return -EINVAL; + } + + ret = hsi_register_client_driver(&hsc_driver); + if (ret) { + pr_err("Error while registering HSI/SSI driver %d", ret); + return ret; + } + + pr_info("HSI/SSI char device loaded\n"); + + return 0; +} +module_init(hsc_init); + +static void __exit hsc_exit(void) +{ + hsi_unregister_client_driver(&hsc_driver); + pr_info("HSI char device removed\n"); +} +module_exit(hsc_exit); + +MODULE_AUTHOR("Andras Domokos <andras.domokos@nokia.com>"); +MODULE_ALIAS("hsi:hsi_char"); +MODULE_DESCRIPTION("HSI character device"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c new file mode 100644 index 000000000000..4e2d79b79334 --- /dev/null +++ b/drivers/hsi/hsi.c @@ -0,0 +1,494 @@ +/* + * HSI core. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include <linux/hsi/hsi.h> +#include <linux/compiler.h> +#include <linux/rwsem.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/kobject.h> +#include <linux/slab.h> +#include <linux/string.h> +#include "hsi_core.h" + +static struct device_type hsi_ctrl = { + .name = "hsi_controller", +}; + +static struct device_type hsi_cl = { + .name = "hsi_client", +}; + +static struct device_type hsi_port = { + .name = "hsi_port", +}; + +static ssize_t modalias_show(struct device *dev, + struct device_attribute *a __maybe_unused, char *buf) +{ + return sprintf(buf, "hsi:%s\n", dev_name(dev)); +} + +static struct device_attribute hsi_bus_dev_attrs[] = { + __ATTR_RO(modalias), + __ATTR_NULL, +}; + +static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + if (dev->type == &hsi_cl) + add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); + + return 0; +} + +static int hsi_bus_match(struct device *dev, struct device_driver *driver) +{ + return strcmp(dev_name(dev), driver->name) == 0; +} + +static struct bus_type hsi_bus_type = { + .name = "hsi", + .dev_attrs = hsi_bus_dev_attrs, + .match = hsi_bus_match, + .uevent = hsi_bus_uevent, +}; + +static void hsi_client_release(struct device *dev) +{ + kfree(to_hsi_client(dev)); +} + +static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) +{ + struct hsi_client *cl; + unsigned long flags; + + cl = kzalloc(sizeof(*cl), GFP_KERNEL); + if (!cl) + return; + cl->device.type = &hsi_cl; + cl->tx_cfg = info->tx_cfg; + cl->rx_cfg = info->rx_cfg; + cl->device.bus = &hsi_bus_type; + cl->device.parent = &port->device; + cl->device.release = hsi_client_release; + dev_set_name(&cl->device, info->name); + cl->device.platform_data = info->platform_data; + spin_lock_irqsave(&port->clock, flags); + list_add_tail(&cl->link, &port->clients); + spin_unlock_irqrestore(&port->clock, flags); + if (info->archdata) + cl->device.archdata = *info->archdata; + if (device_register(&cl->device) < 0) { + pr_err("hsi: failed to register client: %s\n", info->name); + kfree(cl); + } +} + +static void hsi_scan_board_info(struct hsi_controller *hsi) +{ + struct hsi_cl_info *cl_info; + struct hsi_port *p; + + list_for_each_entry(cl_info, &hsi_board_list, list) + if (cl_info->info.hsi_id == hsi->id) { + p = hsi_find_port_num(hsi, cl_info->info.port); + if (!p) + continue; + hsi_new_client(p, &cl_info->info); + } +} + +static int hsi_remove_client(struct device *dev, void *data __maybe_unused) +{ + struct hsi_client *cl = to_hsi_client(dev); + struct hsi_port *port = to_hsi_port(dev->parent); + unsigned long flags; + + spin_lock_irqsave(&port->clock, flags); + list_del(&cl->link); + spin_unlock_irqrestore(&port->clock, flags); + device_unregister(dev); + + return 0; +} + +static int hsi_remove_port(struct device *dev, void *data __maybe_unused) +{ + device_for_each_child(dev, NULL, hsi_remove_client); + device_unregister(dev); + + return 0; +} + +static void hsi_controller_release(struct device *dev __maybe_unused) +{ +} + +static void hsi_port_release(struct device *dev __maybe_unused) +{ +} + +/** + * hsi_unregister_controller - Unregister an HSI controller + * @hsi: The HSI controller to register + */ +void hsi_unregister_controller(struct hsi_controller *hsi) +{ + device_for_each_child(&hsi->device, NULL, hsi_remove_port); + device_unregister(&hsi->device); +} +EXPORT_SYMBOL_GPL(hsi_unregister_controller); + +/** + * hsi_register_controller - Register an HSI controller and its ports + * @hsi: The HSI controller to register + * + * Returns -errno on failure, 0 on success. + */ +int hsi_register_controller(struct hsi_controller *hsi) +{ + unsigned int i; + int err; + + hsi->device.type = &hsi_ctrl; + hsi->device.bus = &hsi_bus_type; + hsi->device.release = hsi_controller_release; + err = device_register(&hsi->device); + if (err < 0) + return err; + for (i = 0; i < hsi->num_ports; i++) { + hsi->port[i].device.parent = &hsi->device; + hsi->port[i].device.bus = &hsi_bus_type; + hsi->port[i].device.release = hsi_port_release; + hsi->port[i].device.type = &hsi_port; + INIT_LIST_HEAD(&hsi->port[i].clients); + spin_lock_init(&hsi->port[i].clock); + err = device_register(&hsi->port[i].device); + if (err < 0) + goto out; + } + /* Populate HSI bus with HSI clients */ + hsi_scan_board_info(hsi); + + return 0; +out: + hsi_unregister_controller(hsi); + + return err; +} +EXPORT_SYMBOL_GPL(hsi_register_controller); + +/** + * hsi_register_client_driver - Register an HSI client to the HSI bus + * @drv: HSI client driver to register + * + * Returns -errno on failure, 0 on success. + */ +int hsi_register_client_driver(struct hsi_client_driver *drv) +{ + drv->driver.bus = &hsi_bus_type; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(hsi_register_client_driver); + +static inline int hsi_dummy_msg(struct hsi_msg *msg __maybe_unused) +{ + return 0; +} + +static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) +{ + return 0; +} + +/** + * hsi_alloc_controller - Allocate an HSI controller and its ports + * @n_ports: Number of ports on the HSI controller + * @flags: Kernel allocation flags + * + * Return NULL on failure or a pointer to an hsi_controller on success. + */ +struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) +{ + struct hsi_controller *hsi; + struct hsi_port *port; + unsigned int i; + + if (!n_ports) + return NULL; + + port = kzalloc(sizeof(*port)*n_ports, flags); + if (!port) + return NULL; + hsi = kzalloc(sizeof(*hsi), flags); + if (!hsi) + goto out; + for (i = 0; i < n_ports; i++) { + dev_set_name(&port[i].device, "port%d", i); + port[i].num = i; + port[i].async = hsi_dummy_msg; + port[i].setup = hsi_dummy_cl; + port[i].flush = hsi_dummy_cl; + port[i].start_tx = hsi_dummy_cl; + port[i].stop_tx = hsi_dummy_cl; + port[i].release = hsi_dummy_cl; + mutex_init(&port[i].lock); + } + hsi->num_ports = n_ports; + hsi->port = port; + + return hsi; +out: + kfree(port); + + return NULL; +} +EXPORT_SYMBOL_GPL(hsi_alloc_controller); + +/** + * hsi_free_controller - Free an HSI controller + * @hsi: Pointer to HSI controller + */ +void hsi_free_controller(struct hsi_controller *hsi) +{ + if (!hsi) + return; + + kfree(hsi->port); + kfree(hsi); +} +EXPORT_SYMBOL_GPL(hsi_free_controller); + +/** + * hsi_free_msg - Free an HSI message + * @msg: Pointer to the HSI message + * + * Client is responsible to free the buffers pointed by the scatterlists. + */ +void hsi_free_msg(struct hsi_msg *msg) +{ + if (!msg) + return; + sg_free_table(&msg->sgt); + kfree(msg); +} +EXPORT_SYMBOL_GPL(hsi_free_msg); + +/** + * hsi_alloc_msg - Allocate an HSI message + * @nents: Number of memory entries + * @flags: Kernel allocation flags + * + * nents can be 0. This mainly makes sense for read transfer. + * In that case, HSI drivers will call the complete callback when + * there is data to be read without consuming it. + * + * Return NULL on failure or a pointer to an hsi_msg on success. + */ +struct hsi_msg *hsi_alloc_msg(unsigned int nents, gfp_t flags) +{ + struct hsi_msg *msg; + int err; + + msg = kzalloc(sizeof(*msg), flags); + if (!msg) + return NULL; + + if (!nents) + return msg; + + err = sg_alloc_table(&msg->sgt, nents, flags); + if (unlikely(err)) { + kfree(msg); + msg = NULL; + } + + return msg; +} +EXPORT_SYMBOL_GPL(hsi_alloc_msg); + +/** + * hsi_async - Submit an HSI transfer to the controller + * @cl: HSI client sending the transfer + * @msg: The HSI transfer passed to controller + * + * The HSI message must have the channel, ttype, complete and destructor + * fields set beforehand. If nents > 0 then the client has to initialize + * also the scatterlists to point to the buffers to write to or read from. + * + * HSI controllers relay on pre-allocated buffers from their clients and they + * do not allocate buffers on their own. + * + * Once the HSI message transfer finishes, the HSI controller calls the + * complete callback with the status and actual_len fields of the HSI message + * updated. The complete callback can be called before returning from + * hsi_async. + * + * Returns -errno on failure or 0 on success + */ +int hsi_async(struct hsi_client *cl, struct hsi_msg *msg) +{ + struct hsi_port *port = hsi_get_port(cl); + + if (!hsi_port_claimed(cl)) + return -EACCES; + + WARN_ON_ONCE(!msg->destructor || !msg->complete); + msg->cl = cl; + + return port->async(msg); +} +EXPORT_SYMBOL_GPL(hsi_async); + +/** + * hsi_claim_port - Claim the HSI client's port + * @cl: HSI client that wants to claim its port + * @share: Flag to indicate if the client wants to share the port or not. + * + * Returns -errno on failure, 0 on success. + */ +int hsi_claim_port(struct hsi_client *cl, unsigned int share) +{ + struct hsi_port *port = hsi_get_port(cl); + int err = 0; + + mutex_lock(&port->lock); + if ((port->claimed) && (!port->shared || !share)) { + err = -EBUSY; + goto out; + } + if (!try_module_get(to_hsi_controller(port->device.parent)->owner)) { + err = -ENODEV; + goto out; + } + port->claimed++; + port->shared = !!share; + cl->pclaimed = 1; +out: + mutex_unlock(&port->lock); + + return err; +} +EXPORT_SYMBOL_GPL(hsi_claim_port); + +/** + * hsi_release_port - Release the HSI client's port + * @cl: HSI client which previously claimed its port + */ +void hsi_release_port(struct hsi_client *cl) +{ + struct hsi_port *port = hsi_get_port(cl); + + mutex_lock(&port->lock); + /* Allow HW driver to do some cleanup */ + port->release(cl); + if (cl->pclaimed) + port->claimed--; + BUG_ON(port->claimed < 0); + cl->pclaimed = 0; + if (!port->claimed) + port->shared = 0; + module_put(to_hsi_controller(port->device.parent)->owner); + mutex_unlock(&port->lock); +} +EXPORT_SYMBOL_GPL(hsi_release_port); + +static int hsi_start_rx(struct hsi_client *cl, void *data __maybe_unused) +{ + if (cl->hsi_start_rx) + (*cl->hsi_start_rx)(cl); + + return 0; +} + +static int hsi_stop_rx(struct hsi_client *cl, void *data __maybe_unused) +{ + if (cl->hsi_stop_rx) + (*cl->hsi_stop_rx)(cl); + + return 0; +} + +static int hsi_port_for_each_client(struct hsi_port *port, void *data, + int (*fn)(struct hsi_client *cl, void *data)) +{ + struct hsi_client *cl; + + spin_lock(&port->clock); + list_for_each_entry(cl, &port->clients, link) { + spin_unlock(&port->clock); + (*fn)(cl, data); + spin_lock(&port->clock); + } + spin_unlock(&port->clock); + + return 0; +} + +/** + * hsi_event -Notifies clients about port events + * @port: Port where the event occurred + * @event: The event type + * + * Clients should not be concerned about wake line behavior. However, due + * to a race condition in HSI HW protocol, clients need to be notified + * about wake line changes, so they can implement a workaround for it. + * + * Events: + * HSI_EVENT_START_RX - Incoming wake line high + * HSI_EVENT_STOP_RX - Incoming wake line down + */ +void hsi_event(struct hsi_port *port, unsigned int event) +{ + int (*fn)(struct hsi_client *cl, void *data); + + switch (event) { + case HSI_EVENT_START_RX: + fn = hsi_start_rx; + break; + case HSI_EVENT_STOP_RX: + fn = hsi_stop_rx; + break; + default: + return; + } + hsi_port_for_each_client(port, NULL, fn); +} +EXPORT_SYMBOL_GPL(hsi_event); + +static int __init hsi_init(void) +{ + return bus_register(&hsi_bus_type); +} +postcore_initcall(hsi_init); + +static void __exit hsi_exit(void) +{ + bus_unregister(&hsi_bus_type); +} +module_exit(hsi_exit); + +MODULE_AUTHOR("Carlos Chinea <carlos.chinea@nokia.com>"); +MODULE_DESCRIPTION("High-speed Synchronous Serial Interface (HSI) framework"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hsi/hsi_boardinfo.c b/drivers/hsi/hsi_boardinfo.c new file mode 100644 index 000000000000..e56bc6da5f98 --- /dev/null +++ b/drivers/hsi/hsi_boardinfo.c @@ -0,0 +1,62 @@ +/* + * HSI clients registration interface + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include <linux/hsi/hsi.h> +#include <linux/list.h> +#include <linux/slab.h> +#include "hsi_core.h" + +/* + * hsi_board_list is only used internally by the HSI framework. + * No one else is allowed to make use of it. + */ +LIST_HEAD(hsi_board_list); +EXPORT_SYMBOL_GPL(hsi_board_list); + +/** + * hsi_register_board_info - Register HSI clients information + * @info: Array of HSI clients on the board + * @len: Length of the array + * + * HSI clients are statically declared and registered on board files. + * + * HSI clients will be automatically registered to the HSI bus once the + * controller and the port where the clients wishes to attach are registered + * to it. + * + * Return -errno on failure, 0 on success. + */ +int __init hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len) +{ + struct hsi_cl_info *cl_info; + + cl_info = kzalloc(sizeof(*cl_info) * len, GFP_KERNEL); + if (!cl_info) + return -ENOMEM; + + for (; len; len--, info++, cl_info++) { + cl_info->info = *info; + list_add_tail(&cl_info->list, &hsi_board_list); + } + + return 0; +} diff --git a/drivers/hsi/hsi_core.h b/drivers/hsi/hsi_core.h new file mode 100644 index 000000000000..ab5c2fb175fd --- /dev/null +++ b/drivers/hsi/hsi_core.h @@ -0,0 +1,35 @@ +/* + * HSI framework internal interfaces, + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_HSI_CORE_H__ +#define __LINUX_HSI_CORE_H__ + +#include <linux/hsi/hsi.h> + +struct hsi_cl_info { + struct list_head list; + struct hsi_board_info info; +}; + +extern struct list_head hsi_board_list; + +#endif /* __LINUX_HSI_CORE_H__ */ diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5b32d56dbb4d..8deedc1b9840 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -253,7 +253,8 @@ config SENSORS_K10TEMP If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of the AMD Family 10h and all revisions of the AMD Family 11h, - 12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures. + 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity) + microarchitectures. This driver can also be built as a module. If so, the module will be called k10temp. @@ -425,7 +426,7 @@ config SENSORS_GL520SM config SENSORS_GPIO_FAN tristate "GPIO fan" - depends on GENERIC_GPIO + depends on GPIOLIB help If you say yes here you get support for fans connected to GPIO lines. @@ -883,7 +884,7 @@ source drivers/hwmon/pmbus/Kconfig config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." - depends on GENERIC_GPIO + depends on GPIOLIB help If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 554f046bcf20..145f13580ff0 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -632,6 +632,7 @@ static int register_ro_attrs(struct acpi_power_meter_resource *resource, sensors->dev_attr.show = ro->show; sensors->index = ro->index; + sysfs_attr_init(&sensors->dev_attr.attr); res = device_create_file(dev, &sensors->dev_attr); if (res) { sensors->dev_attr.attr.name = NULL; @@ -661,6 +662,7 @@ static int register_rw_attrs(struct acpi_power_meter_resource *resource, sensors->dev_attr.store = rw->set; sensors->index = rw->index; + sysfs_attr_init(&sensors->dev_attr.attr); res = device_create_file(dev, &sensors->dev_attr); if (res) { sensors->dev_attr.attr.name = NULL; diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index 0e0cfcc36f8d..ce43642ef03e 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -128,6 +128,7 @@ static int __devinit ad7314_probe(struct spi_device *spi_dev) ret = PTR_ERR(chip->hwmon_dev); goto error_remove_group; } + chip->spi_dev = spi_dev; return 0; error_remove_group: diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index ff37363ea5bc..44e1fd7f3d81 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -233,18 +233,15 @@ static const auto_chan_table_t auto_channel_select_table_adm1030 = { * nearest match if no exact match where found. */ static int -get_fan_auto_nearest(struct adm1031_data *data, - int chan, u8 val, u8 reg, u8 *new_reg) +get_fan_auto_nearest(struct adm1031_data *data, int chan, u8 val, u8 reg) { int i; int first_match = -1, exact_match = -1; u8 other_reg_val = (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1]; - if (val == 0) { - *new_reg = 0; + if (val == 0) return 0; - } for (i = 0; i < 8; i++) { if ((val == (*data->chan_select_table)[i][chan]) && @@ -264,13 +261,11 @@ get_fan_auto_nearest(struct adm1031_data *data, } if (exact_match >= 0) - *new_reg = exact_match; + return exact_match; else if (first_match >= 0) - *new_reg = first_match; - else - return -EINVAL; + return first_match; - return 0; + return -EINVAL; } static ssize_t show_fan_auto_channel(struct device *dev, @@ -301,11 +296,12 @@ set_fan_auto_channel(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); - ret = get_fan_auto_nearest(data, nr, val, data->conf1, ®); - if (ret) { + ret = get_fan_auto_nearest(data, nr, val, data->conf1); + if (ret < 0) { mutex_unlock(&data->update_lock); return ret; } + reg = ret; data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1); if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) ^ (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) { diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 729499e75210..ece4159bd453 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -276,6 +276,7 @@ static bool duty_mode_enabled(u8 pwm_enable) return false; default: BUG(); + return true; } } @@ -291,6 +292,7 @@ static bool auto_mode_enabled(u8 pwm_enable) return true; default: BUG(); + return false; } } diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index aba29d63f195..307bb325dde9 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -33,6 +33,9 @@ static bool force; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); +/* PCI-IDs for Northbridge devices not used anywhere else */ +#define PCI_DEVICE_ID_AMD_15H_M10H_NB_F3 0x1403 + /* CPUID function 0x80000001, ebx */ #define CPUID_PKGTYPE_MASK 0xf0000000 #define CPUID_PKGTYPE_F 0x00000000 @@ -210,6 +213,7 @@ static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_NB_F3) }, {} }; MODULE_DEVICE_TABLE(pci, k10temp_id_table); diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index 193067e27b6f..de8f7adaccbd 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -596,8 +596,10 @@ static int max6639_remove(struct i2c_client *client) return 0; } -static int max6639_suspend(struct i2c_client *client, pm_message_t mesg) +#ifdef CONFIG_PM_SLEEP +static int max6639_suspend(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG); if (data < 0) return data; @@ -606,8 +608,9 @@ static int max6639_suspend(struct i2c_client *client, pm_message_t mesg) MAX6639_REG_GCONFIG, data | MAX6639_GCONFIG_STANDBY); } -static int max6639_resume(struct i2c_client *client) +static int max6639_resume(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG); if (data < 0) return data; @@ -615,6 +618,7 @@ static int max6639_resume(struct i2c_client *client) return i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG, data & ~MAX6639_GCONFIG_STANDBY); } +#endif /* CONFIG_PM_SLEEP */ static const struct i2c_device_id max6639_id[] = { {"max6639", 0}, @@ -623,15 +627,18 @@ static const struct i2c_device_id max6639_id[] = { MODULE_DEVICE_TABLE(i2c, max6639_id); +static const struct dev_pm_ops max6639_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(max6639_suspend, max6639_resume) +}; + static struct i2c_driver max6639_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "max6639", + .pm = &max6639_pm_ops, }, .probe = max6639_probe, .remove = max6639_remove, - .suspend = max6639_suspend, - .resume = max6639_resume, .id_table = max6639_id, .detect = max6639_detect, .address_list = normal_i2c, diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index a25350cf9554..54922ed12978 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -2619,15 +2619,15 @@ static struct platform_driver w83627ehf_driver = { static int __init w83627ehf_find(int sioaddr, unsigned short *addr, struct w83627ehf_sio_data *sio_data) { - static const char __initdata sio_name_W83627EHF[] = "W83627EHF"; - static const char __initdata sio_name_W83627EHG[] = "W83627EHG"; - static const char __initdata sio_name_W83627DHG[] = "W83627DHG"; - static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P"; - static const char __initdata sio_name_W83627UHG[] = "W83627UHG"; - static const char __initdata sio_name_W83667HG[] = "W83667HG"; - static const char __initdata sio_name_W83667HG_B[] = "W83667HG-B"; - static const char __initdata sio_name_NCT6775[] = "NCT6775F"; - static const char __initdata sio_name_NCT6776[] = "NCT6776F"; + static const char sio_name_W83627EHF[] __initconst = "W83627EHF"; + static const char sio_name_W83627EHG[] __initconst = "W83627EHG"; + static const char sio_name_W83627DHG[] __initconst = "W83627DHG"; + static const char sio_name_W83627DHG_P[] __initconst = "W83627DHG-P"; + static const char sio_name_W83627UHG[] __initconst = "W83627UHG"; + static const char sio_name_W83667HG[] __initconst = "W83667HG"; + static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B"; + static const char sio_name_NCT6775[] __initconst = "NCT6775F"; + static const char sio_name_NCT6776[] __initconst = "NCT6776F"; u16 val; const char *sio_name; diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 37f42113af31..00e8f213f56e 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -182,7 +182,6 @@ static int i2c_dw_pci_resume(struct device *dev) pci_restore_state(pdev); i2c_dw_init(i2c); - i2c_dw_enable(i2c); return 0; } diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index c976285d313e..fa080ebd568f 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -516,12 +516,6 @@ static struct notifier_block i7300_idle_nb = { MODULE_DEVICE_TABLE(pci, pci_tbl); -int stats_open_generic(struct inode *inode, struct file *fp) -{ - fp->private_data = inode->i_private; - return 0; -} - static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count, loff_t *off) { @@ -534,7 +528,7 @@ static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count, } static const struct file_operations idle_fops = { - .open = stats_open_generic, + .open = simple_open, .read = stats_read_ul, .llseek = default_llseek, }; diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 83b720ef6c34..246fdc151652 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -179,7 +179,7 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused, { struct ib_port_attr attr; char *speed = ""; - int rate = -1; /* in deci-Gb/sec */ + int rate; /* in deci-Gb/sec */ ssize_t ret; ret = ib_query_port(p->ibdev, p->port_num, &attr); @@ -187,9 +187,6 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused, return ret; switch (attr.active_speed) { - case IB_SPEED_SDR: - rate = 25; - break; case IB_SPEED_DDR: speed = " DDR"; rate = 50; @@ -210,6 +207,10 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused, speed = " EDR"; rate = 250; break; + case IB_SPEED_SDR: + default: /* default to SDR for invalid rates */ + rate = 25; + break; } rate *= ib_width_enum_to_int(attr.active_width); diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 75d305629300..669673e81439 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -253,6 +253,11 @@ static int ib_link_query_port(struct ib_device *ibdev, u8 port, if (out_mad->data[15] & 0x1) props->active_speed = IB_SPEED_FDR10; } + + /* Avoid wrong speed value returned by FW if the IB link is down. */ + if (props->state == IB_PORT_DOWN) + props->active_speed = IB_SPEED_SDR; + out: kfree(in_mad); kfree(out_mad); diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 69e2ad06e515..daf21b899999 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -3232,6 +3232,7 @@ static void srpt_add_one(struct ib_device *device) srq_attr.attr.max_wr = sdev->srq_size; srq_attr.attr.max_sge = 1; srq_attr.attr.srq_limit = 0; + srq_attr.srq_type = IB_SRQT_BASIC; sdev->srq = ib_create_srq(sdev->pd, &srq_attr); if (IS_ERR(sdev->srq)) diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c index 34aebb8cd080..3c843cd725fa 100644 --- a/drivers/input/misc/da9052_onkey.c +++ b/drivers/input/misc/da9052_onkey.c @@ -95,7 +95,8 @@ static int __devinit da9052_onkey_probe(struct platform_device *pdev) input_dev = input_allocate_device(); if (!onkey || !input_dev) { dev_err(&pdev->dev, "Failed to allocate memory\n"); - return -ENOMEM; + error = -ENOMEM; + goto err_free_mem; } onkey->input = input_dev; diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index d2c0db159b18..479011004a11 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -486,7 +486,6 @@ static void elantech_input_sync_v4(struct psmouse *psmouse) unsigned char *packet = psmouse->packet; input_report_key(dev, BTN_LEFT, packet[0] & 0x01); - input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); input_mt_report_pointer_emulation(dev, true); input_sync(dev); } @@ -967,6 +966,7 @@ static int elantech_set_input_params(struct psmouse *psmouse) if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width)) return -1; + __set_bit(INPUT_PROP_POINTER, dev->propbit); __set_bit(EV_KEY, dev->evbit); __set_bit(EV_ABS, dev->evbit); __clear_bit(EV_REL, dev->evbit); @@ -1017,7 +1017,9 @@ static int elantech_set_input_params(struct psmouse *psmouse) */ psmouse_warn(psmouse, "couldn't query resolution data.\n"); } - + /* v4 is clickpad, with only one button. */ + __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); + __clear_bit(BTN_RIGHT, dev->keybit); __set_bit(BTN_TOOL_QUADTAP, dev->keybit); /* For X to recognize me as touchpad. */ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); @@ -1245,6 +1247,8 @@ static void elantech_disconnect(struct psmouse *psmouse) */ static int elantech_reconnect(struct psmouse *psmouse) { + psmouse_reset(psmouse); + if (elantech_detect(psmouse, 0)) return -1; @@ -1324,6 +1328,8 @@ int elantech_init(struct psmouse *psmouse) if (!etd) return -ENOMEM; + psmouse_reset(psmouse); + etd->parity[0] = 1; for (i = 1; i < 256; i++) etd->parity[i] = etd->parity[i & (i - 1)] ^ 1; diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index a9ad8e1402be..39fe9b737cae 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -12,9 +12,9 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/input-polldev.h> +#include <linux/gpio.h> #include <linux/gpio_mouse.h> -#include <asm/gpio.h> /* * Timer function which is run every scan_ms ms when the device is opened. diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index a977bfaa6821..661a0ca3b3d6 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -741,6 +741,14 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) } } else { /* SFAC packet */ + if ((packet[0] & (FSP_PB0_LBTN|FSP_PB0_PHY_BTN)) == + FSP_PB0_LBTN) { + /* On-pad click in SFAC mode should be handled + * by userspace. On-pad clicks in MFMC mode + * are real clickpad clicks, and not ignored. + */ + packet[0] &= ~FSP_PB0_LBTN; + } /* no multi-finger information */ ad->last_mt_fgr = 0; diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index 22b218018137..f3102494237d 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -304,7 +304,7 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) return 0; if (trackpoint_read(&psmouse->ps2dev, TP_EXT_BTN, &button_info)) { - printk(KERN_WARNING "trackpoint.c: failed to get extended button data\n"); + psmouse_warn(psmouse, "failed to get extended button data\n"); button_info = 0; } @@ -326,16 +326,18 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group); if (error) { - printk(KERN_ERR - "trackpoint.c: failed to create sysfs attributes, error: %d\n", - error); + psmouse_err(psmouse, + "failed to create sysfs attributes, error: %d\n", + error); kfree(psmouse->private); psmouse->private = NULL; return -1; } - printk(KERN_INFO "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n", - firmware_id, (button_info & 0xf0) >> 4, button_info & 0x0f); + psmouse_info(psmouse, + "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n", + firmware_id, + (button_info & 0xf0) >> 4, button_info & 0x0f); return 0; } diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c index 6c6f6d8ea9b4..f7eda3d00fad 100644 --- a/drivers/input/touchscreen/tps6507x-ts.c +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -1,6 +1,4 @@ /* - * drivers/input/touchscreen/tps6507x_ts.c - * * Touchscreen driver for the tps6507x chip. * * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com) @@ -376,4 +374,4 @@ module_platform_driver(tps6507x_ts_driver); MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>"); MODULE_DESCRIPTION("TPS6507x - TouchScreen driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:tps6507x-tsc"); +MODULE_ALIAS("platform:tps6507x-ts"); diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index ae2ec929e52f..a5bee8e2dfce 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -2707,7 +2707,8 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist, * The exported alloc_coherent function for dma_ops. */ static void *alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_addr, gfp_t flag) + dma_addr_t *dma_addr, gfp_t flag, + struct dma_attrs *attrs) { unsigned long flags; void *virt_addr; @@ -2765,7 +2766,8 @@ out_free: * The exported free_coherent function for dma_ops. */ static void free_coherent(struct device *dev, size_t size, - void *virt_addr, dma_addr_t dma_addr) + void *virt_addr, dma_addr_t dma_addr, + struct dma_attrs *attrs) { unsigned long flags; struct protection_domain *domain; @@ -2846,8 +2848,8 @@ static void __init prealloc_protection_domains(void) } static struct dma_map_ops amd_iommu_dma_ops = { - .alloc_coherent = alloc_coherent, - .free_coherent = free_coherent, + .alloc = alloc_coherent, + .free = free_coherent, .map_page = map_page, .unmap_page = unmap_page, .map_sg = map_sg, diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 132f93b05154..f93d5ac8f81c 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -2949,7 +2949,8 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, } static void *intel_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags) + dma_addr_t *dma_handle, gfp_t flags, + struct dma_attrs *attrs) { void *vaddr; int order; @@ -2981,7 +2982,7 @@ static void *intel_alloc_coherent(struct device *hwdev, size_t size, } static void intel_free_coherent(struct device *hwdev, size_t size, void *vaddr, - dma_addr_t dma_handle) + dma_addr_t dma_handle, struct dma_attrs *attrs) { int order; @@ -3126,8 +3127,8 @@ static int intel_mapping_error(struct device *dev, dma_addr_t dma_addr) } struct dma_map_ops intel_dma_ops = { - .alloc_coherent = intel_alloc_coherent, - .free_coherent = intel_free_coherent, + .alloc = intel_alloc_coherent, + .free = intel_free_coherent, .map_sg = intel_map_sg, .unmap_sg = intel_unmap_sg, .map_page = intel_map_page, diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c index 103dbd92e256..f55fc5dfbadc 100644 --- a/drivers/iommu/omap-iommu-debug.c +++ b/drivers/iommu/omap-iommu-debug.c @@ -323,15 +323,9 @@ err_out: return count; } -static int debug_open_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - #define DEBUG_FOPS(name) \ static const struct file_operations debug_##name##_fops = { \ - .open = debug_open_generic, \ + .open = simple_open, \ .read = debug_read_##name, \ .write = debug_write_##name, \ .llseek = generic_file_llseek, \ @@ -339,7 +333,7 @@ static int debug_open_generic(struct inode *inode, struct file *file) #define DEBUG_FOPS_RO(name) \ static const struct file_operations debug_##name##_fops = { \ - .open = debug_open_generic, \ + .open = simple_open, \ .read = debug_read_##name, \ .llseek = generic_file_llseek, \ }; diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index b3d6ac17272d..a6d9fd2858f7 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -176,7 +176,7 @@ static void if_close(struct tty_struct *tty, struct file *filp) struct cardstate *cs = tty->driver_data; if (!cs) { /* happens if we didn't find cs in open */ - printk(KERN_DEBUG "%s: no cardstate\n", __func__); + gig_dbg(DEBUG_IF, "%s: no cardstate", __func__); return; } diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c index 05ed4d0cb18b..c0b8c960ee3f 100644 --- a/drivers/isdn/hardware/mISDN/avmfritz.c +++ b/drivers/isdn/hardware/mISDN/avmfritz.c @@ -891,7 +891,7 @@ open_bchannel(struct fritzcard *fc, struct channel_req *rq) { struct bchannel *bch; - if (rq->adr.channel > 2) + if (rq->adr.channel == 0 || rq->adr.channel > 2) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c index d055ae7fa040..e2c83a2d7691 100644 --- a/drivers/isdn/hardware/mISDN/hfcpci.c +++ b/drivers/isdn/hardware/mISDN/hfcpci.c @@ -1962,7 +1962,7 @@ open_bchannel(struct hfc_pci *hc, struct channel_req *rq) { struct bchannel *bch; - if (rq->adr.channel > 2) + if (rq->adr.channel == 0 || rq->adr.channel > 2) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 602338734634..8cde2a0538ab 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -486,7 +486,7 @@ open_bchannel(struct hfcsusb *hw, struct channel_req *rq) { struct bchannel *bch; - if (rq->adr.channel > 2) + if (rq->adr.channel == 0 || rq->adr.channel > 2) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c index b47e9bed2185..884369f09cad 100644 --- a/drivers/isdn/hardware/mISDN/mISDNipac.c +++ b/drivers/isdn/hardware/mISDN/mISDNipac.c @@ -1506,7 +1506,7 @@ open_bchannel(struct ipac_hw *ipac, struct channel_req *rq) { struct bchannel *bch; - if (rq->adr.channel > 2) + if (rq->adr.channel == 0 || rq->adr.channel > 2) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c index 10446ab404b5..9a6da6edcfa8 100644 --- a/drivers/isdn/hardware/mISDN/mISDNisar.c +++ b/drivers/isdn/hardware/mISDN/mISDNisar.c @@ -1670,7 +1670,7 @@ isar_open(struct isar_hw *isar, struct channel_req *rq) { struct bchannel *bch; - if (rq->adr.channel > 2) + if (rq->adr.channel == 0 || rq->adr.channel > 2) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c index dd6de9f7a8a3..c726e09d0981 100644 --- a/drivers/isdn/hardware/mISDN/netjet.c +++ b/drivers/isdn/hardware/mISDN/netjet.c @@ -860,7 +860,7 @@ open_bchannel(struct tiger_hw *card, struct channel_req *rq) { struct bchannel *bch; - if (rq->adr.channel > 2) + if (rq->adr.channel == 0 || rq->adr.channel > 2) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c index 7f1e7ba75cd1..2183357f0799 100644 --- a/drivers/isdn/hardware/mISDN/w6692.c +++ b/drivers/isdn/hardware/mISDN/w6692.c @@ -1015,7 +1015,7 @@ open_bchannel(struct w6692_hw *card, struct channel_req *rq) { struct bchannel *bch; - if (rq->adr.channel > 2) + if (rq->adr.channel == 0 || rq->adr.channel > 2) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 3d0dfa7a89a2..97e73e555d11 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -539,9 +539,6 @@ static int bitmap_new_disk_sb(struct bitmap *bitmap) bitmap->events_cleared = bitmap->mddev->events; sb->events_cleared = cpu_to_le64(bitmap->mddev->events); - bitmap->flags |= BITMAP_HOSTENDIAN; - sb->version = cpu_to_le32(BITMAP_MAJOR_HOSTENDIAN); - kunmap_atomic(sb); return 0; @@ -1788,7 +1785,9 @@ int bitmap_load(struct mddev *mddev) * re-add of a missing device */ start = mddev->recovery_cp; + mutex_lock(&mddev->bitmap_info.mutex); err = bitmap_init_from_disk(bitmap, start); + mutex_unlock(&mddev->bitmap_info.mutex); if (err) goto out; diff --git a/drivers/md/linear.c b/drivers/md/linear.c index b0fcc7d02adb..fa211d80fc0a 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -198,6 +198,7 @@ out: static int linear_run (struct mddev *mddev) { struct linear_conf *conf; + int ret; if (md_check_no_bitmap(mddev)) return -EINVAL; @@ -211,7 +212,13 @@ static int linear_run (struct mddev *mddev) blk_queue_merge_bvec(mddev->queue, linear_mergeable_bvec); mddev->queue->backing_dev_info.congested_fn = linear_congested; mddev->queue->backing_dev_info.congested_data = mddev; - return md_integrity_register(mddev); + + ret = md_integrity_register(mddev); + if (ret) { + kfree(conf); + mddev->private = NULL; + } + return ret; } static int linear_add(struct mddev *mddev, struct md_rdev *rdev) diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 6f31f5596e01..de63a1fc3737 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -407,6 +407,8 @@ static sector_t raid0_size(struct mddev *mddev, sector_t sectors, int raid_disks return array_sectors; } +static int raid0_stop(struct mddev *mddev); + static int raid0_run(struct mddev *mddev) { struct r0conf *conf; @@ -454,7 +456,12 @@ static int raid0_run(struct mddev *mddev) blk_queue_merge_bvec(mddev->queue, raid0_mergeable_bvec); dump_zones(mddev); - return md_integrity_register(mddev); + + ret = md_integrity_register(mddev); + if (ret) + raid0_stop(mddev); + + return ret; } static int raid0_stop(struct mddev *mddev) @@ -625,6 +632,7 @@ static void *raid0_takeover_raid10(struct mddev *mddev) static void *raid0_takeover_raid1(struct mddev *mddev) { struct r0conf *priv_conf; + int chunksect; /* Check layout: * - (N - 1) mirror drives must be already faulty @@ -635,10 +643,25 @@ static void *raid0_takeover_raid1(struct mddev *mddev) return ERR_PTR(-EINVAL); } + /* + * a raid1 doesn't have the notion of chunk size, so + * figure out the largest suitable size we can use. + */ + chunksect = 64 * 2; /* 64K by default */ + + /* The array must be an exact multiple of chunksize */ + while (chunksect && (mddev->array_sectors & (chunksect - 1))) + chunksect >>= 1; + + if ((chunksect << 9) < PAGE_SIZE) + /* array size does not allow a suitable chunk size */ + return ERR_PTR(-EINVAL); + /* Set new parameters */ mddev->new_level = 0; mddev->new_layout = 0; - mddev->new_chunk_sectors = 128; /* by default set chunk size to 64k */ + mddev->new_chunk_sectors = chunksect; + mddev->chunk_sectors = chunksect; mddev->delta_disks = 1 - mddev->raid_disks; mddev->raid_disks = 1; /* make sure it will be not marked as dirty */ diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 4a40a200d769..15dd59b84e94 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1712,6 +1712,7 @@ static int process_checks(struct r1bio *r1_bio) struct r1conf *conf = mddev->private; int primary; int i; + int vcnt; for (primary = 0; primary < conf->raid_disks * 2; primary++) if (r1_bio->bios[primary]->bi_end_io == end_sync_read && @@ -1721,9 +1722,9 @@ static int process_checks(struct r1bio *r1_bio) break; } r1_bio->read_disk = primary; + vcnt = (r1_bio->sectors + PAGE_SIZE / 512 - 1) >> (PAGE_SHIFT - 9); for (i = 0; i < conf->raid_disks * 2; i++) { int j; - int vcnt = r1_bio->sectors >> (PAGE_SHIFT- 9); struct bio *pbio = r1_bio->bios[primary]; struct bio *sbio = r1_bio->bios[i]; int size; @@ -1738,7 +1739,7 @@ static int process_checks(struct r1bio *r1_bio) s = sbio->bi_io_vec[j].bv_page; if (memcmp(page_address(p), page_address(s), - PAGE_SIZE)) + sbio->bi_io_vec[j].bv_len)) break; } } else @@ -2386,8 +2387,7 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipp int ok = 1; for (i = 0 ; i < conf->raid_disks * 2 ; i++) if (r1_bio->bios[i]->bi_end_io == end_sync_write) { - struct md_rdev *rdev = - rcu_dereference(conf->mirrors[i].rdev); + struct md_rdev *rdev = conf->mirrors[i].rdev; ok = rdev_set_badblocks(rdev, sector_nr, min_bad, 0 ) && ok; @@ -2636,11 +2636,13 @@ static struct r1conf *setup_conf(struct mddev *mddev) return ERR_PTR(err); } +static int stop(struct mddev *mddev); static int run(struct mddev *mddev) { struct r1conf *conf; int i; struct md_rdev *rdev; + int ret; if (mddev->level != 1) { printk(KERN_ERR "md/raid1:%s: raid level not set to mirroring (%d)\n", @@ -2705,7 +2707,11 @@ static int run(struct mddev *mddev) mddev->queue->backing_dev_info.congested_data = mddev; blk_queue_merge_bvec(mddev->queue, raid1_mergeable_bvec); } - return md_integrity_register(mddev); + + ret = md_integrity_register(mddev); + if (ret) + stop(mddev); + return ret; } static int stop(struct mddev *mddev) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 3540316886f2..c8dbb84d5357 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1788,6 +1788,7 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) struct r10conf *conf = mddev->private; int i, first; struct bio *tbio, *fbio; + int vcnt; atomic_set(&r10_bio->remaining, 1); @@ -1802,10 +1803,10 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) first = i; fbio = r10_bio->devs[i].bio; + vcnt = (r10_bio->sectors + (PAGE_SIZE >> 9) - 1) >> (PAGE_SHIFT - 9); /* now find blocks with errors */ for (i=0 ; i < conf->copies ; i++) { int j, d; - int vcnt = r10_bio->sectors >> (PAGE_SHIFT-9); tbio = r10_bio->devs[i].bio; @@ -1821,7 +1822,7 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) for (j = 0; j < vcnt; j++) if (memcmp(page_address(fbio->bi_io_vec[j].bv_page), page_address(tbio->bi_io_vec[j].bv_page), - PAGE_SIZE)) + fbio->bi_io_vec[j].bv_len)) break; if (j == vcnt) continue; @@ -1871,7 +1872,6 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) */ for (i = 0; i < conf->copies; i++) { int j, d; - int vcnt = r10_bio->sectors >> (PAGE_SHIFT-9); tbio = r10_bio->devs[i].repl_bio; if (!tbio || !tbio->bi_end_io) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 23ac880bba9a..f351422938e0 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2471,39 +2471,41 @@ handle_failed_sync(struct r5conf *conf, struct stripe_head *sh, int abort = 0; int i; - md_done_sync(conf->mddev, STRIPE_SECTORS, 0); clear_bit(STRIPE_SYNCING, &sh->state); s->syncing = 0; s->replacing = 0; /* There is nothing more to do for sync/check/repair. + * Don't even need to abort as that is handled elsewhere + * if needed, and not always wanted e.g. if there is a known + * bad block here. * For recover/replace we need to record a bad block on all * non-sync devices, or abort the recovery */ - if (!test_bit(MD_RECOVERY_RECOVER, &conf->mddev->recovery)) - return; - /* During recovery devices cannot be removed, so locking and - * refcounting of rdevs is not needed - */ - for (i = 0; i < conf->raid_disks; i++) { - struct md_rdev *rdev = conf->disks[i].rdev; - if (rdev - && !test_bit(Faulty, &rdev->flags) - && !test_bit(In_sync, &rdev->flags) - && !rdev_set_badblocks(rdev, sh->sector, - STRIPE_SECTORS, 0)) - abort = 1; - rdev = conf->disks[i].replacement; - if (rdev - && !test_bit(Faulty, &rdev->flags) - && !test_bit(In_sync, &rdev->flags) - && !rdev_set_badblocks(rdev, sh->sector, - STRIPE_SECTORS, 0)) - abort = 1; - } - if (abort) { - conf->recovery_disabled = conf->mddev->recovery_disabled; - set_bit(MD_RECOVERY_INTR, &conf->mddev->recovery); + if (test_bit(MD_RECOVERY_RECOVER, &conf->mddev->recovery)) { + /* During recovery devices cannot be removed, so + * locking and refcounting of rdevs is not needed + */ + for (i = 0; i < conf->raid_disks; i++) { + struct md_rdev *rdev = conf->disks[i].rdev; + if (rdev + && !test_bit(Faulty, &rdev->flags) + && !test_bit(In_sync, &rdev->flags) + && !rdev_set_badblocks(rdev, sh->sector, + STRIPE_SECTORS, 0)) + abort = 1; + rdev = conf->disks[i].replacement; + if (rdev + && !test_bit(Faulty, &rdev->flags) + && !test_bit(In_sync, &rdev->flags) + && !rdev_set_badblocks(rdev, sh->sector, + STRIPE_SECTORS, 0)) + abort = 1; + } + if (abort) + conf->recovery_disabled = + conf->mddev->recovery_disabled; } + md_done_sync(conf->mddev, STRIPE_SECTORS, !abort); } static int want_replace(struct stripe_head *sh, int disk_idx) @@ -3203,7 +3205,8 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) /* Not in-sync */; else if (is_bad) { /* also not in-sync */ - if (!test_bit(WriteErrorSeen, &rdev->flags)) { + if (!test_bit(WriteErrorSeen, &rdev->flags) && + test_bit(R5_UPTODATE, &dev->flags)) { /* treat as in-sync, but with a read error * which we can now try to correct */ @@ -3276,12 +3279,14 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) /* If there is a failed device being replaced, * we must be recovering. * else if we are after recovery_cp, we must be syncing + * else if MD_RECOVERY_REQUESTED is set, we also are syncing. * else we can only be replacing * sync and recovery both need to read all devices, and so * use the same flag. */ if (do_recovery || - sh->sector >= conf->mddev->recovery_cp) + sh->sector >= conf->mddev->recovery_cp || + test_bit(MD_RECOVERY_REQUESTED, &(conf->mddev->recovery))) s->syncing = 1; else s->replacing = 1; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 4555baa383b2..39696c6a4ed7 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -143,10 +143,12 @@ struct dvb_frontend_private { static void dvb_frontend_wakeup(struct dvb_frontend *fe); static int dtv_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p_out); +static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p); static bool has_get_frontend(struct dvb_frontend *fe) { - return fe->ops.get_frontend; + return fe->ops.get_frontend != NULL; } /* @@ -697,6 +699,7 @@ restart: fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; fepriv->delay = HZ / 2; } + dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); fe->ops.read_status(fe, &s); if (s != fepriv->status) { dvb_frontend_add_event(fe, s); /* update event list */ @@ -1833,6 +1836,13 @@ static int dtv_set_frontend(struct dvb_frontend *fe) return -EINVAL; /* + * Initialize output parameters to match the values given by + * the user. FE_SET_FRONTEND triggers an initial frontend event + * with status = 0, which copies output parameters to userspace. + */ + dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); + + /* * Be sure that the bandwidth will be filled for all * non-satellite systems, as tuners need to know what * low pass/Nyquist half filter should be applied, in diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c index 3b7b102f20ae..482d249ca7f3 100644 --- a/drivers/media/dvb/dvb-usb/it913x.c +++ b/drivers/media/dvb/dvb-usb/it913x.c @@ -238,12 +238,27 @@ static int it913x_read_reg(struct usb_device *udev, u32 reg) static u32 it913x_query(struct usb_device *udev, u8 pro) { - int ret; + int ret, i; u8 data[4]; - ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ, - 0x1222, 0, &data[0], 3); + u8 ver; + + for (i = 0; i < 5; i++) { + ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ, + 0x1222, 0, &data[0], 3); + ver = data[0]; + if (ver > 0 && ver < 3) + break; + msleep(100); + } - it913x_config.chip_ver = data[0]; + if (ver < 1 || ver > 2) { + info("Failed to identify chip version applying 1"); + it913x_config.chip_ver = 0x1; + it913x_config.chip_type = 0x9135; + return 0; + } + + it913x_config.chip_ver = ver; it913x_config.chip_type = (u16)(data[2] << 8) + data[1]; info("Chip Version=%02x Chip Type=%04x", it913x_config.chip_ver, @@ -660,30 +675,41 @@ static int it913x_download_firmware(struct usb_device *udev, if ((packet_size > min_pkt) || (i == fw->size)) { fw_data = (u8 *)(fw->data + pos); pos += packet_size; - if (packet_size > 0) - ret |= it913x_io(udev, WRITE_DATA, + if (packet_size > 0) { + ret = it913x_io(udev, WRITE_DATA, DEV_0, CMD_SCATTER_WRITE, 0, 0, fw_data, packet_size); + if (ret < 0) + break; + } udelay(1000); } } i++; } - ret |= it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0); - - msleep(100); - if (ret < 0) - info("FRM Firmware Download Failed (%04x)" , ret); + info("FRM Firmware Download Failed (%d)" , ret); else info("FRM Firmware Download Completed - Resetting Device"); - ret |= it913x_return_status(udev); + msleep(30); + + ret = it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0); + if (ret < 0) + info("FRM Device not responding to reboot"); + + ret = it913x_return_status(udev); + if (ret == 0) { + info("FRM Failed to reboot device"); + return -ENODEV; + } msleep(30); - ret |= it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400); + ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400); + + msleep(30); /* Tuner function */ if (it913x_config.dual_mode) @@ -901,5 +927,5 @@ module_usb_driver(it913x_driver); MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); MODULE_DESCRIPTION("it913x USB 2 Driver"); -MODULE_VERSION("1.27"); +MODULE_VERSION("1.28"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 5452beef8e11..989e556913ed 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -1763,13 +1763,13 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) IVTV_DEBUG_IOCTL("AUDIO_CHANNEL_SELECT\n"); if (iarg > AUDIO_STEREO_SWAPPED) return -EINVAL; - return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg); + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg + 1); case AUDIO_BILINGUAL_CHANNEL_SELECT: IVTV_DEBUG_IOCTL("AUDIO_BILINGUAL_CHANNEL_SELECT\n"); if (iarg > AUDIO_STEREO_SWAPPED) return -EINVAL; - return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg); + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg + 1); default: return -EINVAL; diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 4a44f9a1bae0..b76b0ac0958f 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -468,22 +468,30 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, spin_unlock_irqrestore(&stream->clock.lock, flags); } -static int uvc_video_clock_init(struct uvc_streaming *stream) +static void uvc_video_clock_reset(struct uvc_streaming *stream) { struct uvc_clock *clock = &stream->clock; - spin_lock_init(&clock->lock); clock->head = 0; clock->count = 0; - clock->size = 32; clock->last_sof = -1; clock->sof_offset = -1; +} + +static int uvc_video_clock_init(struct uvc_streaming *stream) +{ + struct uvc_clock *clock = &stream->clock; + + spin_lock_init(&clock->lock); + clock->size = 32; clock->samples = kmalloc(clock->size * sizeof(*clock->samples), GFP_KERNEL); if (clock->samples == NULL) return -ENOMEM; + uvc_video_clock_reset(stream); + return 0; } @@ -1424,8 +1432,6 @@ static void uvc_uninit_video(struct uvc_streaming *stream, int free_buffers) if (free_buffers) uvc_free_urb_buffers(stream); - - uvc_video_clock_cleanup(stream); } /* @@ -1555,10 +1561,6 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) uvc_video_stats_start(stream); - ret = uvc_video_clock_init(stream); - if (ret < 0) - return ret; - if (intf->num_altsetting > 1) { struct usb_host_endpoint *best_ep = NULL; unsigned int best_psize = 3 * 1024; @@ -1683,6 +1685,8 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset) stream->frozen = 0; + uvc_video_clock_reset(stream); + ret = uvc_commit_video(stream, &stream->ctrl); if (ret < 0) { uvc_queue_enable(&stream->queue, 0); @@ -1819,25 +1823,35 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable) uvc_uninit_video(stream, 1); usb_set_interface(stream->dev->udev, stream->intfnum, 0); uvc_queue_enable(&stream->queue, 0); + uvc_video_clock_cleanup(stream); return 0; } - ret = uvc_queue_enable(&stream->queue, 1); + ret = uvc_video_clock_init(stream); if (ret < 0) return ret; + ret = uvc_queue_enable(&stream->queue, 1); + if (ret < 0) + goto error_queue; + /* Commit the streaming parameters. */ ret = uvc_commit_video(stream, &stream->ctrl); - if (ret < 0) { - uvc_queue_enable(&stream->queue, 0); - return ret; - } + if (ret < 0) + goto error_commit; ret = uvc_init_video(stream, GFP_KERNEL); - if (ret < 0) { - usb_set_interface(stream->dev->udev, stream->intfnum, 0); - uvc_queue_enable(&stream->queue, 0); - } + if (ret < 0) + goto error_video; + + return 0; + +error_video: + usb_set_interface(stream->dev->udev, stream->intfnum, 0); +error_commit: + uvc_queue_enable(&stream->queue, 0); +error_queue: + uvc_video_clock_cleanup(stream); return ret; } diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c index 3aa36eb5c79b..44a3fdbadef4 100644 --- a/drivers/mfd/aat2870-core.c +++ b/drivers/mfd/aat2870-core.c @@ -262,13 +262,6 @@ static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf) return count; } -static int aat2870_reg_open_file(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - - return 0; -} - static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -330,7 +323,7 @@ static ssize_t aat2870_reg_write_file(struct file *file, } static const struct file_operations aat2870_reg_fops = { - .open = aat2870_reg_open_file, + .open = simple_open, .read = aat2870_reg_read_file, .write = aat2870_reg_write_file, }; diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 60107ee166fc..1efad20fb175 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -483,12 +483,6 @@ struct ab3100_get_set_reg_priv { bool mode; }; -static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t ab3100_get_set_reg(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) @@ -583,7 +577,7 @@ static ssize_t ab3100_get_set_reg(struct file *file, } static const struct file_operations ab3100_get_set_reg_fops = { - .open = ab3100_get_set_reg_open_file, + .open = simple_open, .write = ab3100_get_set_reg, .llseek = noop_llseek, }; diff --git a/drivers/misc/ibmasm/ibmasmfs.c b/drivers/misc/ibmasm/ibmasmfs.c index 1c034b80d408..6673e578b3e9 100644 --- a/drivers/misc/ibmasm/ibmasmfs.c +++ b/drivers/misc/ibmasm/ibmasmfs.c @@ -500,12 +500,6 @@ static ssize_t r_heartbeat_file_write(struct file *file, const char __user *buf, return 1; } -static int remote_settings_file_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static int remote_settings_file_close(struct inode *inode, struct file *file) { return 0; @@ -600,7 +594,7 @@ static const struct file_operations r_heartbeat_fops = { }; static const struct file_operations remote_settings_fops = { - .open = remote_settings_file_open, + .open = simple_open, .release = remote_settings_file_close, .read = remote_settings_file_read, .write = remote_settings_file_write, diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index 3f7ad83ed740..3aa9a969b373 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -134,12 +134,17 @@ static int force_hwbrks; static int hwbreaks_ok; static int hw_break_val; static int hw_break_val2; +static int cont_instead_of_sstep; +static unsigned long cont_thread_id; +static unsigned long sstep_thread_id; #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC) static int arch_needs_sstep_emulation = 1; #else static int arch_needs_sstep_emulation; #endif +static unsigned long cont_addr; static unsigned long sstep_addr; +static int restart_from_top_after_write; static int sstep_state; /* Storage for the registers, in GDB format. */ @@ -187,7 +192,8 @@ static int kgdbts_unreg_thread(void *ptr) */ while (!final_ack) msleep_interruptible(1500); - + /* Pause for any other threads to exit after final ack. */ + msleep_interruptible(1000); if (configured) kgdb_unregister_io_module(&kgdbts_io_ops); configured = 0; @@ -211,7 +217,7 @@ static unsigned long lookup_addr(char *arg) if (!strcmp(arg, "kgdbts_break_test")) addr = (unsigned long)kgdbts_break_test; else if (!strcmp(arg, "sys_open")) - addr = (unsigned long)sys_open; + addr = (unsigned long)do_sys_open; else if (!strcmp(arg, "do_fork")) addr = (unsigned long)do_fork; else if (!strcmp(arg, "hw_break_val")) @@ -283,6 +289,16 @@ static void hw_break_val_write(void) hw_break_val++; } +static int get_thread_id_continue(char *put_str, char *arg) +{ + char *ptr = &put_str[11]; + + if (put_str[1] != 'T' || put_str[2] != '0') + return 1; + kgdb_hex2long(&ptr, &cont_thread_id); + return 0; +} + static int check_and_rewind_pc(char *put_str, char *arg) { unsigned long addr = lookup_addr(arg); @@ -299,13 +315,21 @@ static int check_and_rewind_pc(char *put_str, char *arg) if (addr + BREAK_INSTR_SIZE == ip) offset = -BREAK_INSTR_SIZE; #endif - if (strcmp(arg, "silent") && ip + offset != addr) { + + if (arch_needs_sstep_emulation && sstep_addr && + ip + offset == sstep_addr && + ((!strcmp(arg, "sys_open") || !strcmp(arg, "do_fork")))) { + /* This is special case for emulated single step */ + v2printk("Emul: rewind hit single step bp\n"); + restart_from_top_after_write = 1; + } else if (strcmp(arg, "silent") && ip + offset != addr) { eprintk("kgdbts: BP mismatch %lx expected %lx\n", ip + offset, addr); return 1; } /* Readjust the instruction pointer if needed */ ip += offset; + cont_addr = ip; #ifdef GDB_ADJUSTS_BREAK_OFFSET instruction_pointer_set(&kgdbts_regs, ip); #endif @@ -315,6 +339,8 @@ static int check_and_rewind_pc(char *put_str, char *arg) static int check_single_step(char *put_str, char *arg) { unsigned long addr = lookup_addr(arg); + static int matched_id; + /* * From an arch indepent point of view the instruction pointer * should be on a different instruction @@ -324,6 +350,29 @@ static int check_single_step(char *put_str, char *arg) gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs); v2printk("Singlestep stopped at IP: %lx\n", instruction_pointer(&kgdbts_regs)); + + if (sstep_thread_id != cont_thread_id) { + /* + * Ensure we stopped in the same thread id as before, else the + * debugger should continue until the original thread that was + * single stepped is scheduled again, emulating gdb's behavior. + */ + v2printk("ThrID does not match: %lx\n", cont_thread_id); + if (arch_needs_sstep_emulation) { + if (matched_id && + instruction_pointer(&kgdbts_regs) != addr) + goto continue_test; + matched_id++; + ts.idx -= 2; + sstep_state = 0; + return 0; + } + cont_instead_of_sstep = 1; + ts.idx -= 4; + return 0; + } +continue_test: + matched_id = 0; if (instruction_pointer(&kgdbts_regs) == addr) { eprintk("kgdbts: SingleStep failed at %lx\n", instruction_pointer(&kgdbts_regs)); @@ -365,10 +414,40 @@ static int got_break(char *put_str, char *arg) return 1; } +static void get_cont_catch(char *arg) +{ + /* Always send detach because the test is completed at this point */ + fill_get_buf("D"); +} + +static int put_cont_catch(char *put_str, char *arg) +{ + /* This is at the end of the test and we catch any and all input */ + v2printk("kgdbts: cleanup task: %lx\n", sstep_thread_id); + ts.idx--; + return 0; +} + +static int emul_reset(char *put_str, char *arg) +{ + if (strncmp(put_str, "$OK", 3)) + return 1; + if (restart_from_top_after_write) { + restart_from_top_after_write = 0; + ts.idx = -1; + } + return 0; +} + static void emul_sstep_get(char *arg) { if (!arch_needs_sstep_emulation) { - fill_get_buf(arg); + if (cont_instead_of_sstep) { + cont_instead_of_sstep = 0; + fill_get_buf("c"); + } else { + fill_get_buf(arg); + } return; } switch (sstep_state) { @@ -398,9 +477,11 @@ static void emul_sstep_get(char *arg) static int emul_sstep_put(char *put_str, char *arg) { if (!arch_needs_sstep_emulation) { - if (!strncmp(put_str+1, arg, 2)) - return 0; - return 1; + char *ptr = &put_str[11]; + if (put_str[1] != 'T' || put_str[2] != '0') + return 1; + kgdb_hex2long(&ptr, &sstep_thread_id); + return 0; } switch (sstep_state) { case 1: @@ -411,8 +492,7 @@ static int emul_sstep_put(char *put_str, char *arg) v2printk("Stopped at IP: %lx\n", instruction_pointer(&kgdbts_regs)); /* Want to stop at IP + break instruction size by default */ - sstep_addr = instruction_pointer(&kgdbts_regs) + - BREAK_INSTR_SIZE; + sstep_addr = cont_addr + BREAK_INSTR_SIZE; break; case 2: if (strncmp(put_str, "$OK", 3)) { @@ -424,6 +504,9 @@ static int emul_sstep_put(char *put_str, char *arg) if (strncmp(put_str, "$T0", 3)) { eprintk("kgdbts: failed continue sstep\n"); return 1; + } else { + char *ptr = &put_str[11]; + kgdb_hex2long(&ptr, &sstep_thread_id); } break; case 4: @@ -502,10 +585,10 @@ static struct test_struct bad_read_test[] = { static struct test_struct singlestep_break_test[] = { { "?", "S0*" }, /* Clear break points */ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */ - { "c", "T0*", }, /* Continue */ + { "c", "T0*", NULL, get_thread_id_continue }, /* Continue */ + { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */ { "g", "kgdbts_break_test", NULL, check_and_rewind_pc }, { "write", "OK", write_regs }, /* Write registers */ - { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */ { "g", "kgdbts_break_test", NULL, check_single_step }, { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */ @@ -523,16 +606,16 @@ static struct test_struct singlestep_break_test[] = { static struct test_struct do_fork_test[] = { { "?", "S0*" }, /* Clear break points */ { "do_fork", "OK", sw_break, }, /* set sw breakpoint */ - { "c", "T0*", }, /* Continue */ - { "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */ - { "write", "OK", write_regs }, /* Write registers */ + { "c", "T0*", NULL, get_thread_id_continue }, /* Continue */ { "do_fork", "OK", sw_rem_break }, /*remove breakpoint */ + { "g", "do_fork", NULL, check_and_rewind_pc }, /* check location */ + { "write", "OK", write_regs, emul_reset }, /* Write registers */ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */ { "g", "do_fork", NULL, check_single_step }, { "do_fork", "OK", sw_break, }, /* set sw breakpoint */ { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */ { "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */ - { "", "" }, + { "", "", get_cont_catch, put_cont_catch }, }; /* Test for hitting a breakpoint at sys_open for what ever the number @@ -541,16 +624,16 @@ static struct test_struct do_fork_test[] = { static struct test_struct sys_open_test[] = { { "?", "S0*" }, /* Clear break points */ { "sys_open", "OK", sw_break, }, /* set sw breakpoint */ - { "c", "T0*", }, /* Continue */ - { "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */ - { "write", "OK", write_regs }, /* Write registers */ + { "c", "T0*", NULL, get_thread_id_continue }, /* Continue */ { "sys_open", "OK", sw_rem_break }, /*remove breakpoint */ + { "g", "sys_open", NULL, check_and_rewind_pc }, /* check location */ + { "write", "OK", write_regs, emul_reset }, /* Write registers */ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */ { "g", "sys_open", NULL, check_single_step }, { "sys_open", "OK", sw_break, }, /* set sw breakpoint */ { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */ { "D", "OK", NULL, final_ack_set }, /* detach and unregister I/O */ - { "", "" }, + { "", "", get_cont_catch, put_cont_catch }, }; /* @@ -693,8 +776,8 @@ static int run_simple_test(int is_get_char, int chr) /* This callback is a put char which is when kgdb sends data to * this I/O module. */ - if (ts.tst[ts.idx].get[0] == '\0' && - ts.tst[ts.idx].put[0] == '\0') { + if (ts.tst[ts.idx].get[0] == '\0' && ts.tst[ts.idx].put[0] == '\0' && + !ts.tst[ts.idx].get_handler) { eprintk("kgdbts: ERROR: beyond end of test on" " '%s' line %i\n", ts.name, ts.idx); return 0; @@ -907,6 +990,17 @@ static void kgdbts_run_tests(void) if (ptr) sstep_test = simple_strtol(ptr+1, NULL, 10); + /* All HW break point tests */ + if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) { + hwbreaks_ok = 1; + v1printk("kgdbts:RUN hw breakpoint test\n"); + run_breakpoint_test(1); + v1printk("kgdbts:RUN hw write breakpoint test\n"); + run_hw_break_test(1); + v1printk("kgdbts:RUN access write breakpoint test\n"); + run_hw_break_test(0); + } + /* required internal KGDB tests */ v1printk("kgdbts:RUN plant and detach test\n"); run_plant_and_detach_test(0); @@ -924,35 +1018,11 @@ static void kgdbts_run_tests(void) /* ===Optional tests=== */ - /* All HW break point tests */ - if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) { - hwbreaks_ok = 1; - v1printk("kgdbts:RUN hw breakpoint test\n"); - run_breakpoint_test(1); - v1printk("kgdbts:RUN hw write breakpoint test\n"); - run_hw_break_test(1); - v1printk("kgdbts:RUN access write breakpoint test\n"); - run_hw_break_test(0); - } - if (nmi_sleep) { v1printk("kgdbts:RUN NMI sleep %i seconds test\n", nmi_sleep); run_nmi_sleep_test(nmi_sleep); } -#ifdef CONFIG_DEBUG_RODATA - /* Until there is an api to write to read-only text segments, use - * HW breakpoints for the remainder of any tests, else print a - * failure message if hw breakpoints do not work. - */ - if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) { - eprintk("kgdbts: HW breakpoints do not work," - "skipping remaining tests\n"); - return; - } - force_hwbrks = 1; -#endif /* CONFIG_DEBUG_RODATA */ - /* If the do_fork test is run it will be the last test that is * executed because a kernel thread will be spawned at the very * end to unregister the debug hooks. diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index eed213a5c8cb..b1809650b7aa 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1623,24 +1623,6 @@ static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md) return ret; } -static int -mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) -{ - int err; - - mmc_claim_host(card->host); - err = mmc_set_blocklen(card, 512); - mmc_release_host(card->host); - - if (err) { - pr_err("%s: unable to set block size to 512: %d\n", - md->disk->disk_name, err); - return -EINVAL; - } - - return 0; -} - static void mmc_blk_remove_req(struct mmc_blk_data *md) { struct mmc_card *card; @@ -1768,7 +1750,6 @@ static const struct mmc_fixup blk_fixups[] = static int mmc_blk_probe(struct mmc_card *card) { struct mmc_blk_data *md, *part_md; - int err; char cap_str[10]; /* @@ -1781,10 +1762,6 @@ static int mmc_blk_probe(struct mmc_card *card) if (IS_ERR(md)) return PTR_ERR(md); - err = mmc_blk_set_blksize(md, card); - if (err) - goto out; - string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2, cap_str, sizeof(cap_str)); pr_info("%s: %s %s %s %s\n", @@ -1809,7 +1786,7 @@ static int mmc_blk_probe(struct mmc_card *card) out: mmc_blk_remove_parts(card, md); mmc_blk_remove_req(md); - return err; + return 0; } static void mmc_blk_remove(struct mmc_card *card) @@ -1845,8 +1822,6 @@ static int mmc_blk_resume(struct mmc_card *card) struct mmc_blk_data *md = mmc_get_drvdata(card); if (md) { - mmc_blk_set_blksize(md, card); - /* * Resume involves the card going into idle state, * so current partition is always the main one. diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 5d011a39dfff..3f606068d552 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -267,6 +267,15 @@ int mmc_add_card(struct mmc_card *card) { int ret; const char *type; + const char *uhs_bus_speed_mode = ""; + static const char *const uhs_speeds[] = { + [UHS_SDR12_BUS_SPEED] = "SDR12 ", + [UHS_SDR25_BUS_SPEED] = "SDR25 ", + [UHS_SDR50_BUS_SPEED] = "SDR50 ", + [UHS_SDR104_BUS_SPEED] = "SDR104 ", + [UHS_DDR50_BUS_SPEED] = "DDR50 ", + }; + dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca); @@ -296,6 +305,10 @@ int mmc_add_card(struct mmc_card *card) break; } + if (mmc_sd_card_uhs(card) && + (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds))) + uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed]; + if (mmc_host_is_spi(card->host)) { pr_info("%s: new %s%s%s card on SPI\n", mmc_hostname(card->host), @@ -303,13 +316,13 @@ int mmc_add_card(struct mmc_card *card) mmc_card_ddr_mode(card) ? "DDR " : "", type); } else { - pr_info("%s: new %s%s%s%s card at address %04x\n", + pr_info("%s: new %s%s%s%s%s card at address %04x\n", mmc_hostname(card->host), mmc_card_uhs(card) ? "ultra high speed " : (mmc_card_highspeed(card) ? "high speed " : ""), (mmc_card_hs200(card) ? "HS200 " : ""), mmc_card_ddr_mode(card) ? "DDR " : "", - type, card->rca); + uhs_bus_speed_mode, type, card->rca); } #ifdef CONFIG_DEBUG_FS diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 14f262e9246d..7474c47b9c08 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -527,10 +527,14 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) if (data->flags & MMC_DATA_WRITE) /* - * The limit is really 250 ms, but that is - * insufficient for some crappy cards. + * The MMC spec "It is strongly recommended + * for hosts to implement more than 500ms + * timeout value even if the card indicates + * the 250ms maximum busy length." Even the + * previous value of 300ms is known to be + * insufficient for some cards. */ - limit_us = 300000; + limit_us = 3000000; else limit_us = 100000; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 02914d609a91..54df5adc0413 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -695,6 +695,11 @@ static int mmc_select_powerclass(struct mmc_card *card, else if (host->ios.clock <= 200000000) index = EXT_CSD_PWR_CL_200_195; break; + case MMC_VDD_27_28: + case MMC_VDD_28_29: + case MMC_VDD_29_30: + case MMC_VDD_30_31: + case MMC_VDD_31_32: case MMC_VDD_32_33: case MMC_VDD_33_34: case MMC_VDD_34_35: @@ -1111,11 +1116,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; err = mmc_select_powerclass(card, ext_csd_bits, ext_csd); - if (err) { - pr_err("%s: power class selection to bus width %d failed\n", - mmc_hostname(card->host), 1 << bus_width); - goto err; - } + if (err) + pr_warning("%s: power class selection to bus width %d" + " failed\n", mmc_hostname(card->host), + 1 << bus_width); } /* @@ -1147,10 +1151,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_powerclass(card, ext_csd_bits[idx][0], ext_csd); if (err) - pr_err("%s: power class selection to " - "bus width %d failed\n", - mmc_hostname(card->host), - 1 << bus_width); + pr_warning("%s: power class selection to " + "bus width %d failed\n", + mmc_hostname(card->host), + 1 << bus_width); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, @@ -1178,10 +1182,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_powerclass(card, ext_csd_bits[idx][1], ext_csd); if (err) - pr_err("%s: power class selection to " - "bus width %d ddr %d failed\n", - mmc_hostname(card->host), - 1 << bus_width, ddr); + pr_warning("%s: power class selection to " + "bus width %d ddr %d failed\n", + mmc_hostname(card->host), + 1 << bus_width, ddr); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 40989e6bb53a..236842ec955a 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -192,9 +192,15 @@ static int sdio_bus_remove(struct device *dev) return ret; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM + +static int pm_no_operation(struct device *dev) +{ + return 0; +} static const struct dev_pm_ops sdio_bus_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation) SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, @@ -204,11 +210,11 @@ static const struct dev_pm_ops sdio_bus_pm_ops = { #define SDIO_PM_OPS_PTR (&sdio_bus_pm_ops) -#else /* !CONFIG_PM_RUNTIME */ +#else /* !CONFIG_PM */ #define SDIO_PM_OPS_PTR NULL -#endif /* !CONFIG_PM_RUNTIME */ +#endif /* !CONFIG_PM */ static struct bus_type sdio_bus_type = { .name = "sdio", diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index 000b3ad0f5ca..787aba1682bb 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -31,6 +31,7 @@ # define ATMCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */ # define ATMCI_MR_PDCPADV ( 1 << 14) /* Padding Value */ # define ATMCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */ +# define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */ #define ATMCI_DTOR 0x0008 /* Data Timeout */ # define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ # define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 9819dc09ce08..e94476beca18 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -77,6 +77,7 @@ struct atmel_mci_caps { bool has_cstor_reg; bool has_highspeed; bool has_rwproof; + bool has_odd_clk_div; }; struct atmel_mci_dma { @@ -482,7 +483,14 @@ err: static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, unsigned int ns) { - return (ns * (host->bus_hz / 1000000) + 999) / 1000; + /* + * It is easier here to use us instead of ns for the timeout, + * it prevents from overflows during calculation. + */ + unsigned int us = DIV_ROUND_UP(ns, 1000); + + /* Maximum clock frequency is host->bus_hz/2 */ + return us * (DIV_ROUND_UP(host->bus_hz, 2000000)); } static void atmci_set_timeout(struct atmel_mci *host, @@ -1127,16 +1135,27 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } /* Calculate clock divider */ - clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; - if (clkdiv > 255) { - dev_warn(&mmc->class_dev, - "clock %u too slow; using %lu\n", - clock_min, host->bus_hz / (2 * 256)); - clkdiv = 255; + if (host->caps.has_odd_clk_div) { + clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2; + if (clkdiv > 511) { + dev_warn(&mmc->class_dev, + "clock %u too slow; using %lu\n", + clock_min, host->bus_hz / (511 + 2)); + clkdiv = 511; + } + host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1) + | ATMCI_MR_CLKODD(clkdiv & 1); + } else { + clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; + if (clkdiv > 255) { + dev_warn(&mmc->class_dev, + "clock %u too slow; using %lu\n", + clock_min, host->bus_hz / (2 * 256)); + clkdiv = 255; + } + host->mode_reg = ATMCI_MR_CLKDIV(clkdiv); } - host->mode_reg = ATMCI_MR_CLKDIV(clkdiv); - /* * WRPROOF and RDPROOF prevent overruns/underruns by * stopping the clock when the FIFO is full/empty. @@ -2007,35 +2026,35 @@ static void __init atmci_get_cap(struct atmel_mci *host) "version: 0x%x\n", version); host->caps.has_dma = 0; - host->caps.has_pdc = 0; + host->caps.has_pdc = 1; host->caps.has_cfg_reg = 0; host->caps.has_cstor_reg = 0; host->caps.has_highspeed = 0; host->caps.has_rwproof = 0; + host->caps.has_odd_clk_div = 0; /* keep only major version number */ switch (version & 0xf00) { - case 0x100: - case 0x200: - host->caps.has_pdc = 1; - host->caps.has_rwproof = 1; - break; - case 0x300: - case 0x400: case 0x500: + host->caps.has_odd_clk_div = 1; + case 0x400: + case 0x300: #ifdef CONFIG_AT_HDMAC host->caps.has_dma = 1; #else - host->caps.has_dma = 0; dev_info(&host->pdev->dev, "has dma capability but dma engine is not selected, then use pio\n"); #endif + host->caps.has_pdc = 0; host->caps.has_cfg_reg = 1; host->caps.has_cstor_reg = 1; host->caps.has_highspeed = 1; + case 0x200: host->caps.has_rwproof = 1; + case 0x100: break; default: + host->caps.has_pdc = 0; dev_warn(&host->pdev->dev, "Unmanaged mci version, set minimum capabilities\n"); break; diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 65f36cf2ff33..b0f2ef988188 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -38,10 +38,10 @@ #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/module.h> +#include <linux/fsl/mxs-dma.h> #include <mach/mxs.h> #include <mach/common.h> -#include <mach/dma.h> #include <mach/mmc.h> #define DRIVER_NAME "mxs-mmc" @@ -305,7 +305,7 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id) } static struct dma_async_tx_descriptor *mxs_mmc_prep_dma( - struct mxs_mmc_host *host, unsigned int append) + struct mxs_mmc_host *host, unsigned long flags) { struct dma_async_tx_descriptor *desc; struct mmc_data *data = host->data; @@ -325,7 +325,7 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma( } desc = dmaengine_prep_slave_sg(host->dmach, - sgl, sg_len, host->slave_dirn, append); + sgl, sg_len, host->slave_dirn, flags); if (desc) { desc->callback = mxs_mmc_dma_irq_callback; desc->callback_param = host; @@ -358,7 +358,7 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host) host->ssp_pio_words[2] = cmd1; host->dma_dir = DMA_NONE; host->slave_dirn = DMA_TRANS_NONE; - desc = mxs_mmc_prep_dma(host, 0); + desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK); if (!desc) goto out; @@ -398,7 +398,7 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host) host->ssp_pio_words[2] = cmd1; host->dma_dir = DMA_NONE; host->slave_dirn = DMA_TRANS_NONE; - desc = mxs_mmc_prep_dma(host, 0); + desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK); if (!desc) goto out; @@ -526,7 +526,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host) host->data = data; host->dma_dir = dma_data_dir; host->slave_dirn = slave_dirn; - desc = mxs_mmc_prep_dma(host, 1); + desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) goto out; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 47adb161d3ad..5c2b1c10af9c 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1785,7 +1785,7 @@ static inline struct omap_mmc_platform_data } #endif -static int __init omap_hsmmc_probe(struct platform_device *pdev) +static int __devinit omap_hsmmc_probe(struct platform_device *pdev) { struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; struct mmc_host *mmc; @@ -1818,8 +1818,6 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) if (res == NULL || irq < 0) return -ENXIO; - res->start += pdata->reg_offset; - res->end += pdata->reg_offset; res = request_mem_region(res->start, resource_size(res), pdev->name); if (res == NULL) return -EBUSY; @@ -1843,7 +1841,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) host->dma_ch = -1; host->irq = irq; host->slot_id = 0; - host->mapbase = res->start; + host->mapbase = res->start + pdata->reg_offset; host->base = ioremap(host->mapbase, SZ_4K); host->power_mode = MMC_POWER_OFF; host->next_data.cookie = 1; @@ -1875,8 +1873,6 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) goto err1; } - omap_hsmmc_context_save(host); - if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) { dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n"); mmc->caps2 |= MMC_CAP2_NO_MULTI_READ; @@ -1887,6 +1883,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) pm_runtime_set_autosuspend_delay(host->dev, MMC_AUTOSUSPEND_DELAY); pm_runtime_use_autosuspend(host->dev); + omap_hsmmc_context_save(host); + if (cpu_is_omap2430()) { host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); /* @@ -2018,8 +2016,7 @@ err_reg: err_irq_cd_init: free_irq(host->irq, host); err_irq: - pm_runtime_mark_last_busy(host->dev); - pm_runtime_put_autosuspend(host->dev); + pm_runtime_put_sync(host->dev); pm_runtime_disable(host->dev); clk_put(host->fclk); if (host->got_dbclk) { @@ -2037,35 +2034,33 @@ err: return ret; } -static int omap_hsmmc_remove(struct platform_device *pdev) +static int __devexit omap_hsmmc_remove(struct platform_device *pdev) { struct omap_hsmmc_host *host = platform_get_drvdata(pdev); struct resource *res; - if (host) { - pm_runtime_get_sync(host->dev); - mmc_remove_host(host->mmc); - if (host->use_reg) - omap_hsmmc_reg_put(host); - if (host->pdata->cleanup) - host->pdata->cleanup(&pdev->dev); - free_irq(host->irq, host); - if (mmc_slot(host).card_detect_irq) - free_irq(mmc_slot(host).card_detect_irq, host); - - pm_runtime_put_sync(host->dev); - pm_runtime_disable(host->dev); - clk_put(host->fclk); - if (host->got_dbclk) { - clk_disable(host->dbclk); - clk_put(host->dbclk); - } + pm_runtime_get_sync(host->dev); + mmc_remove_host(host->mmc); + if (host->use_reg) + omap_hsmmc_reg_put(host); + if (host->pdata->cleanup) + host->pdata->cleanup(&pdev->dev); + free_irq(host->irq, host); + if (mmc_slot(host).card_detect_irq) + free_irq(mmc_slot(host).card_detect_irq, host); - mmc_free_host(host->mmc); - iounmap(host->base); - omap_hsmmc_gpio_free(pdev->dev.platform_data); + pm_runtime_put_sync(host->dev); + pm_runtime_disable(host->dev); + clk_put(host->fclk); + if (host->got_dbclk) { + clk_disable(host->dbclk); + clk_put(host->dbclk); } + mmc_free_host(host->mmc); + iounmap(host->base); + omap_hsmmc_gpio_free(pdev->dev.platform_data); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res) release_mem_region(res->start, resource_size(res)); @@ -2078,49 +2073,45 @@ static int omap_hsmmc_remove(struct platform_device *pdev) static int omap_hsmmc_suspend(struct device *dev) { int ret = 0; - struct platform_device *pdev = to_platform_device(dev); - struct omap_hsmmc_host *host = platform_get_drvdata(pdev); + struct omap_hsmmc_host *host = dev_get_drvdata(dev); - if (host && host->suspended) + if (!host) return 0; - if (host) { - pm_runtime_get_sync(host->dev); - host->suspended = 1; - if (host->pdata->suspend) { - ret = host->pdata->suspend(&pdev->dev, - host->slot_id); - if (ret) { - dev_dbg(mmc_dev(host->mmc), - "Unable to handle MMC board" - " level suspend\n"); - host->suspended = 0; - return ret; - } - } - ret = mmc_suspend_host(host->mmc); + if (host && host->suspended) + return 0; + pm_runtime_get_sync(host->dev); + host->suspended = 1; + if (host->pdata->suspend) { + ret = host->pdata->suspend(dev, host->slot_id); if (ret) { + dev_dbg(dev, "Unable to handle MMC board" + " level suspend\n"); host->suspended = 0; - if (host->pdata->resume) { - ret = host->pdata->resume(&pdev->dev, - host->slot_id); - if (ret) - dev_dbg(mmc_dev(host->mmc), - "Unmask interrupt failed\n"); - } - goto err; + return ret; } + } + ret = mmc_suspend_host(host->mmc); - if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) { - omap_hsmmc_disable_irq(host); - OMAP_HSMMC_WRITE(host->base, HCTL, - OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); + if (ret) { + host->suspended = 0; + if (host->pdata->resume) { + ret = host->pdata->resume(dev, host->slot_id); + if (ret) + dev_dbg(dev, "Unmask interrupt failed\n"); } - if (host->got_dbclk) - clk_disable(host->dbclk); + goto err; + } + if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) { + omap_hsmmc_disable_irq(host); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } + + if (host->got_dbclk) + clk_disable(host->dbclk); err: pm_runtime_put_sync(host->dev); return ret; @@ -2130,38 +2121,37 @@ err: static int omap_hsmmc_resume(struct device *dev) { int ret = 0; - struct platform_device *pdev = to_platform_device(dev); - struct omap_hsmmc_host *host = platform_get_drvdata(pdev); + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + + if (!host) + return 0; if (host && !host->suspended) return 0; - if (host) { - pm_runtime_get_sync(host->dev); + pm_runtime_get_sync(host->dev); - if (host->got_dbclk) - clk_enable(host->dbclk); + if (host->got_dbclk) + clk_enable(host->dbclk); - if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) - omap_hsmmc_conf_bus_power(host); + if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) + omap_hsmmc_conf_bus_power(host); - if (host->pdata->resume) { - ret = host->pdata->resume(&pdev->dev, host->slot_id); - if (ret) - dev_dbg(mmc_dev(host->mmc), - "Unmask interrupt failed\n"); - } + if (host->pdata->resume) { + ret = host->pdata->resume(dev, host->slot_id); + if (ret) + dev_dbg(dev, "Unmask interrupt failed\n"); + } - omap_hsmmc_protect_card(host); + omap_hsmmc_protect_card(host); - /* Notify the core to resume the host */ - ret = mmc_resume_host(host->mmc); - if (ret == 0) - host->suspended = 0; + /* Notify the core to resume the host */ + ret = mmc_resume_host(host->mmc); + if (ret == 0) + host->suspended = 0; - pm_runtime_mark_last_busy(host->dev); - pm_runtime_put_autosuspend(host->dev); - } + pm_runtime_mark_last_busy(host->dev); + pm_runtime_put_autosuspend(host->dev); return ret; @@ -2178,7 +2168,7 @@ static int omap_hsmmc_runtime_suspend(struct device *dev) host = platform_get_drvdata(to_platform_device(dev)); omap_hsmmc_context_save(host); - dev_dbg(mmc_dev(host->mmc), "disabled\n"); + dev_dbg(dev, "disabled\n"); return 0; } @@ -2189,7 +2179,7 @@ static int omap_hsmmc_runtime_resume(struct device *dev) host = platform_get_drvdata(to_platform_device(dev)); omap_hsmmc_context_restore(host); - dev_dbg(mmc_dev(host->mmc), "enabled\n"); + dev_dbg(dev, "enabled\n"); return 0; } @@ -2202,7 +2192,8 @@ static struct dev_pm_ops omap_hsmmc_dev_pm_ops = { }; static struct platform_driver omap_hsmmc_driver = { - .remove = omap_hsmmc_remove, + .probe = omap_hsmmc_probe, + .remove = __devexit_p(omap_hsmmc_remove), .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -2211,21 +2202,7 @@ static struct platform_driver omap_hsmmc_driver = { }, }; -static int __init omap_hsmmc_init(void) -{ - /* Register the MMC driver */ - return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe); -} - -static void __exit omap_hsmmc_cleanup(void) -{ - /* Unregister MMC driver */ - platform_driver_unregister(&omap_hsmmc_driver); -} - -module_init(omap_hsmmc_init); -module_exit(omap_hsmmc_cleanup); - +module_platform_driver(omap_hsmmc_driver); MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c index 46fd1fd1b605..177f697b5835 100644 --- a/drivers/mmc/host/sdhci-dove.c +++ b/drivers/mmc/host/sdhci-dove.c @@ -20,6 +20,7 @@ */ #include <linux/io.h> +#include <linux/module.h> #include <linux/mmc/host.h> #include "sdhci-pltfm.h" diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index fbbebe251e01..69ef0beae104 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -1418,8 +1418,6 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, slots = chip->num_slots; /* Quirk may have changed this */ - pci_enable_msi(pdev); - for (i = 0; i < slots; i++) { slot = sdhci_pci_probe_slot(pdev, chip, first_bar, i); if (IS_ERR(slot)) { @@ -1438,8 +1436,6 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, return 0; free: - pci_disable_msi(pdev); - pci_set_drvdata(pdev, NULL); kfree(chip); @@ -1462,8 +1458,6 @@ static void __devexit sdhci_pci_remove(struct pci_dev *pdev) for (i = 0; i < chip->num_slots; i++) sdhci_pci_remove_slot(chip->slots[i]); - pci_disable_msi(pdev); - pci_set_drvdata(pdev, NULL); kfree(chip); } diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index b19e7d435f8d..55a164fcaa15 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -20,6 +20,10 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/mmc/host.h> @@ -53,6 +57,18 @@ struct sdhci_s3c { struct clk *clk_bus[MAX_BUS_CLK]; }; +/** + * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data + * @sdhci_quirks: sdhci host specific quirks. + * + * Specifies platform specific configuration of sdhci controller. + * Note: A structure for driver specific platform data is used for future + * expansion of its usage. + */ +struct sdhci_s3c_drv_data { + unsigned int sdhci_quirks; +}; + static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host) { return sdhci_priv(host); @@ -132,10 +148,10 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost, return UINT_MAX; /* - * Clock divider's step is different as 1 from that of host controller - * when 'clk_type' is S3C_SDHCI_CLK_DIV_EXTERNAL. + * If controller uses a non-standard clock division, find the best clock + * speed possible with selected clock source and skip the division. */ - if (ourhost->pdata->clk_type) { + if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) { rate = clk_round_rate(clksrc, wanted); return wanted - rate; } @@ -272,6 +288,8 @@ static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host) static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_s3c *ourhost = to_s3c(host); + unsigned long timeout; + u16 clk = 0; /* don't bother if the clock is going off */ if (clock == 0) @@ -282,6 +300,25 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock); host->clock = clock; + + clk = SDHCI_CLOCK_INT_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Wait max 20 ms */ + timeout = 20; + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { + printk(KERN_ERR "%s: Internal clock never " + "stabilised.\n", mmc_hostname(host->mmc)); + return; + } + timeout--; + mdelay(1); + } + + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); } /** @@ -382,16 +419,24 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc) } } +static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data( + struct platform_device *pdev) +{ + return (struct sdhci_s3c_drv_data *) + platform_get_device_id(pdev)->driver_data; +} + static int __devinit sdhci_s3c_probe(struct platform_device *pdev) { - struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data; + struct s3c_sdhci_platdata *pdata; + struct sdhci_s3c_drv_data *drv_data; struct device *dev = &pdev->dev; struct sdhci_host *host; struct sdhci_s3c *sc; struct resource *res; int ret, irq, ptr, clks; - if (!pdata) { + if (!pdev->dev.platform_data) { dev_err(dev, "no device data specified\n"); return -ENOENT; } @@ -402,18 +447,20 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) return irq; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "no memory specified\n"); - return -ENOENT; - } - host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c)); if (IS_ERR(host)) { dev_err(dev, "sdhci_alloc_host() failed\n"); return PTR_ERR(host); } + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + ret = -ENOMEM; + goto err_io_clk; + } + memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); + + drv_data = sdhci_s3c_get_driver_data(pdev); sc = sdhci_priv(host); sc->host = host; @@ -464,15 +511,8 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) goto err_no_busclks; } - sc->ioarea = request_mem_region(res->start, resource_size(res), - mmc_hostname(host->mmc)); - if (!sc->ioarea) { - dev_err(dev, "failed to reserve register area\n"); - ret = -ENXIO; - goto err_req_regs; - } - - host->ioaddr = ioremap_nocache(res->start, resource_size(res)); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->ioaddr = devm_request_and_ioremap(&pdev->dev, res); if (!host->ioaddr) { dev_err(dev, "failed to map registers\n"); ret = -ENXIO; @@ -491,6 +531,8 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) /* Setup quirks for the controller */ host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC; host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; + if (drv_data) + host->quirks |= drv_data->sdhci_quirks; #ifndef CONFIG_MMC_SDHCI_S3C_DMA @@ -518,6 +560,14 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT) host->mmc->caps = MMC_CAP_NONREMOVABLE; + switch (pdata->max_width) { + case 8: + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + case 4: + host->mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + } + if (pdata->pm_caps) host->mmc->pm_caps |= pdata->pm_caps; @@ -531,7 +581,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) * If controller does not have internal clock divider, * we can use overriding functions instead of default. */ - if (pdata->clk_type) { + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) { sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock; sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock; sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock; @@ -544,10 +594,17 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) if (pdata->host_caps2) host->mmc->caps2 |= pdata->host_caps2; + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_suspend_ignore_children(&pdev->dev, 1); + ret = sdhci_add_host(host); if (ret) { dev_err(dev, "sdhci_add_host() failed\n"); - goto err_add_host; + pm_runtime_forbid(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + goto err_req_regs; } /* The following two methods of card detection might call @@ -561,10 +618,6 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) return 0; - err_add_host: - release_resource(sc->ioarea); - kfree(sc->ioarea); - err_req_regs: for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) { if (sc->clk_bus[ptr]) { @@ -601,6 +654,8 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev) sdhci_remove_host(host, 1); + pm_runtime_disable(&pdev->dev); + for (ptr = 0; ptr < 3; ptr++) { if (sc->clk_bus[ptr]) { clk_disable(sc->clk_bus[ptr]); @@ -610,18 +665,13 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev) clk_disable(sc->clk_io); clk_put(sc->clk_io); - iounmap(host->ioaddr); - release_resource(sc->ioarea); - kfree(sc->ioarea); - sdhci_free_host(host); platform_set_drvdata(pdev, NULL); return 0; } -#ifdef CONFIG_PM - +#ifdef CONFIG_PM_SLEEP static int sdhci_s3c_suspend(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); @@ -635,10 +685,29 @@ static int sdhci_s3c_resume(struct device *dev) return sdhci_resume_host(host); } +#endif + +#ifdef CONFIG_PM_RUNTIME +static int sdhci_s3c_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + + return sdhci_runtime_suspend_host(host); +} +static int sdhci_s3c_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + + return sdhci_runtime_resume_host(host); +} +#endif + +#ifdef CONFIG_PM static const struct dev_pm_ops sdhci_s3c_pmops = { - .suspend = sdhci_s3c_suspend, - .resume = sdhci_s3c_resume, + SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume) + SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume, + NULL) }; #define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops) @@ -647,9 +716,31 @@ static const struct dev_pm_ops sdhci_s3c_pmops = { #define SDHCI_S3C_PMOPS NULL #endif +#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) +static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = { + .sdhci_quirks = SDHCI_QUIRK_NONSTANDARD_CLOCK, +}; +#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data) +#else +#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)NULL) +#endif + +static struct platform_device_id sdhci_s3c_driver_ids[] = { + { + .name = "s3c-sdhci", + .driver_data = (kernel_ulong_t)NULL, + }, { + .name = "exynos4-sdhci", + .driver_data = EXYNOS4_SDHCI_DRV_DATA, + }, + { } +}; +MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids); + static struct platform_driver sdhci_s3c_driver = { .probe = sdhci_s3c_probe, .remove = __devexit_p(sdhci_s3c_remove), + .id_table = sdhci_s3c_driver_ids, .driver = { .owner = THIS_MODULE, .name = "s3c-sdhci", diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 8262cadfdab7..9aa77f3f04a8 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2782,8 +2782,9 @@ int sdhci_add_host(struct sdhci_host *host) mmc_card_is_removable(mmc)) mmc->caps |= MMC_CAP_NEEDS_POLL; - /* UHS-I mode(s) supported by the host controller. */ - if (host->version >= SDHCI_SPEC_300) + /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */ + if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50)) mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25; /* SDR104 supports also implies SDR50 support */ diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index aafaf0b6eb1c..724b35e85a26 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -454,7 +454,8 @@ static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk) sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_SUP_PCLK); else sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR & - ((fls(host->clk / clk) - 1) << 16)); + ((fls(DIV_ROUND_UP(host->clk, + clk) - 1) - 1) << 16)); sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE); } @@ -1297,14 +1298,8 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev) spin_lock_init(&host->lock); mmc->ops = &sh_mmcif_ops; - mmc->f_max = host->clk; - /* close to 400KHz */ - if (mmc->f_max < 51200000) - mmc->f_min = mmc->f_max / 128; - else if (mmc->f_max < 102400000) - mmc->f_min = mmc->f_max / 256; - else - mmc->f_min = mmc->f_max / 512; + mmc->f_max = host->clk / 2; + mmc->f_min = host->clk / 512; if (pd->ocr) mmc->ocr_avail = pd->ocr; mmc->caps = MMC_CAP_MMC_HIGHSPEED; diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 284cf3433720..5760c1a4b3f6 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -304,9 +304,6 @@ config MTD_OOPS buffer in a flash partition where it can be read back at some later point. - To use, add console=ttyMTDx to the kernel command line, - where x is the MTD device number to use. - config MTD_SWAP tristate "Swap on MTD device support" depends on MTD && SWAP diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 9bcd1f415f43..dbbd2edfb812 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -87,7 +87,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private ** static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); -static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len); +static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len); static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode); static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode); @@ -262,9 +262,9 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd) static void fixup_use_point(struct mtd_info *mtd) { struct map_info *map = mtd->priv; - if (!mtd->point && map_is_linear(map)) { - mtd->point = cfi_intelext_point; - mtd->unpoint = cfi_intelext_unpoint; + if (!mtd->_point && map_is_linear(map)) { + mtd->_point = cfi_intelext_point; + mtd->_unpoint = cfi_intelext_unpoint; } } @@ -274,8 +274,8 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if (cfi->cfiq->BufWriteTimeoutTyp) { printk(KERN_INFO "Using buffer write method\n" ); - mtd->write = cfi_intelext_write_buffers; - mtd->writev = cfi_intelext_writev; + mtd->_write = cfi_intelext_write_buffers; + mtd->_writev = cfi_intelext_writev; } } @@ -443,15 +443,15 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->erase = cfi_intelext_erase_varsize; - mtd->read = cfi_intelext_read; - mtd->write = cfi_intelext_write_words; - mtd->sync = cfi_intelext_sync; - mtd->lock = cfi_intelext_lock; - mtd->unlock = cfi_intelext_unlock; - mtd->is_locked = cfi_intelext_is_locked; - mtd->suspend = cfi_intelext_suspend; - mtd->resume = cfi_intelext_resume; + mtd->_erase = cfi_intelext_erase_varsize; + mtd->_read = cfi_intelext_read; + mtd->_write = cfi_intelext_write_words; + mtd->_sync = cfi_intelext_sync; + mtd->_lock = cfi_intelext_lock; + mtd->_unlock = cfi_intelext_unlock; + mtd->_is_locked = cfi_intelext_is_locked; + mtd->_suspend = cfi_intelext_suspend; + mtd->_resume = cfi_intelext_resume; mtd->flags = MTD_CAP_NORFLASH; mtd->name = map->name; mtd->writesize = 1; @@ -600,12 +600,12 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd) } #ifdef CONFIG_MTD_OTP - mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; - mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg; - mtd->write_user_prot_reg = cfi_intelext_write_user_prot_reg; - mtd->lock_user_prot_reg = cfi_intelext_lock_user_prot_reg; - mtd->get_fact_prot_info = cfi_intelext_get_fact_prot_info; - mtd->get_user_prot_info = cfi_intelext_get_user_prot_info; + mtd->_read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; + mtd->_read_user_prot_reg = cfi_intelext_read_user_prot_reg; + mtd->_write_user_prot_reg = cfi_intelext_write_user_prot_reg; + mtd->_lock_user_prot_reg = cfi_intelext_lock_user_prot_reg; + mtd->_get_fact_prot_info = cfi_intelext_get_fact_prot_info; + mtd->_get_user_prot_info = cfi_intelext_get_user_prot_info; #endif /* This function has the potential to distort the reality @@ -1017,8 +1017,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad case FL_READY: case FL_STATUS: case FL_JEDEC_QUERY: - /* We should really make set_vpp() count, rather than doing this */ - DISABLE_VPP(map); break; default: printk(KERN_ERR "%s: put_chip() called with oldstate %d!!\n", map->name, chip->oldstate); @@ -1324,7 +1322,7 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len, int chipnum; int ret = 0; - if (!map->virt || (from + len > mtd->size)) + if (!map->virt) return -EINVAL; /* Now lock the chip(s) to POINT state */ @@ -1334,7 +1332,6 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len, ofs = from - (chipnum << cfi->chipshift); *virt = map->virt + cfi->chips[chipnum].start + ofs; - *retlen = 0; if (phys) *phys = map->phys + cfi->chips[chipnum].start + ofs; @@ -1369,12 +1366,12 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; unsigned long ofs; - int chipnum; + int chipnum, err = 0; /* Now unlock the chip(s) POINT state */ @@ -1382,7 +1379,7 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - while (len) { + while (len && !err) { unsigned long thislen; struct flchip *chip; @@ -1400,8 +1397,10 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) chip->ref_point_counter--; if(chip->ref_point_counter == 0) chip->state = FL_READY; - } else - printk(KERN_ERR "%s: Warning: unpoint called on non pointed region\n", map->name); /* Should this give an error? */ + } else { + printk(KERN_ERR "%s: Error: unpoint called on non pointed region\n", map->name); + err = -EINVAL; + } put_chip(map, chip, chip->start); mutex_unlock(&chip->mutex); @@ -1410,6 +1409,8 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) ofs = 0; chipnum++; } + + return err; } static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) @@ -1456,8 +1457,6 @@ static int cfi_intelext_read (struct mtd_info *mtd, loff_t from, size_t len, siz chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - *retlen = 0; - while (len) { unsigned long thislen; @@ -1551,7 +1550,8 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, } xip_enable(map, chip, adr); - out: put_chip(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; } @@ -1565,10 +1565,6 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le int chipnum; unsigned long ofs; - *retlen = 0; - if (!len) - return 0; - chipnum = to >> cfi->chipshift; ofs = to - (chipnum << cfi->chipshift); @@ -1794,7 +1790,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, } xip_enable(map, chip, cmd_adr); - out: put_chip(map, chip, cmd_adr); + out: DISABLE_VPP(map); + put_chip(map, chip, cmd_adr); mutex_unlock(&chip->mutex); return ret; } @@ -1813,7 +1810,6 @@ static int cfi_intelext_writev (struct mtd_info *mtd, const struct kvec *vecs, for (i = 0; i < count; i++) len += vecs[i].iov_len; - *retlen = 0; if (!len) return 0; @@ -1932,6 +1928,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, ret = -EIO; } else if (chipstatus & 0x20 && retries--) { printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus); + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); goto retry; @@ -1944,7 +1941,8 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, } xip_enable(map, chip, adr); - out: put_chip(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; } @@ -2086,7 +2084,8 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip } xip_enable(map, chip, adr); -out: put_chip(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; } @@ -2483,7 +2482,7 @@ static int cfi_intelext_suspend(struct mtd_info *mtd) allowed to. Or should we return -EAGAIN, because the upper layers ought to have already shut down anything which was using the device anyway? The latter for now. */ - printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->oldstate); + printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state); ret = -EAGAIN; case FL_PM_SUSPENDED: break; diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 8d70895a58d6..d02592e6a0f0 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -59,6 +59,9 @@ static void cfi_amdstd_resume (struct mtd_info *); static int cfi_amdstd_reboot(struct notifier_block *, unsigned long, void *); static int cfi_amdstd_secsi_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + static void cfi_amdstd_destroy(struct mtd_info *); struct mtd_info *cfi_cmdset_0002(struct map_info *, int); @@ -189,7 +192,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if (cfi->cfiq->BufWriteTimeoutTyp) { pr_debug("Using buffer write method\n" ); - mtd->write = cfi_amdstd_write_buffers; + mtd->_write = cfi_amdstd_write_buffers; } } @@ -228,8 +231,8 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd) static void fixup_use_secsi(struct mtd_info *mtd) { /* Setup for chips with a secsi area */ - mtd->read_user_prot_reg = cfi_amdstd_secsi_read; - mtd->read_fact_prot_reg = cfi_amdstd_secsi_read; + mtd->_read_user_prot_reg = cfi_amdstd_secsi_read; + mtd->_read_fact_prot_reg = cfi_amdstd_secsi_read; } static void fixup_use_erase_chip(struct mtd_info *mtd) @@ -238,7 +241,7 @@ static void fixup_use_erase_chip(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if ((cfi->cfiq->NumEraseRegions == 1) && ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0)) { - mtd->erase = cfi_amdstd_erase_chip; + mtd->_erase = cfi_amdstd_erase_chip; } } @@ -249,8 +252,8 @@ static void fixup_use_erase_chip(struct mtd_info *mtd) */ static void fixup_use_atmel_lock(struct mtd_info *mtd) { - mtd->lock = cfi_atmel_lock; - mtd->unlock = cfi_atmel_unlock; + mtd->_lock = cfi_atmel_lock; + mtd->_unlock = cfi_atmel_unlock; mtd->flags |= MTD_POWERUP_LOCK; } @@ -429,12 +432,12 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->erase = cfi_amdstd_erase_varsize; - mtd->write = cfi_amdstd_write_words; - mtd->read = cfi_amdstd_read; - mtd->sync = cfi_amdstd_sync; - mtd->suspend = cfi_amdstd_suspend; - mtd->resume = cfi_amdstd_resume; + mtd->_erase = cfi_amdstd_erase_varsize; + mtd->_write = cfi_amdstd_write_words; + mtd->_read = cfi_amdstd_read; + mtd->_sync = cfi_amdstd_sync; + mtd->_suspend = cfi_amdstd_suspend; + mtd->_resume = cfi_amdstd_resume; mtd->flags = MTD_CAP_NORFLASH; mtd->name = map->name; mtd->writesize = 1; @@ -443,6 +446,7 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) pr_debug("MTD %s(): write buffer size %d\n", __func__, mtd->writebufsize); + mtd->_panic_write = cfi_amdstd_panic_write; mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot; if (cfi->cfi_mode==CFI_MODE_CFI){ @@ -770,8 +774,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad case FL_READY: case FL_STATUS: - /* We should really make set_vpp() count, rather than doing this */ - DISABLE_VPP(map); break; default: printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate); @@ -1013,13 +1015,9 @@ static int cfi_amdstd_read (struct mtd_info *mtd, loff_t from, size_t len, size_ int ret = 0; /* ofs: offset within the first chip that the first read should start */ - chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - - *retlen = 0; - while (len) { unsigned long thislen; @@ -1097,16 +1095,11 @@ static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len, int chipnum; int ret = 0; - /* ofs: offset within the first chip that the first read should start */ - /* 8 secsi bytes per chip */ chipnum=from>>3; ofs=from & 7; - - *retlen = 0; - while (len) { unsigned long thislen; @@ -1234,6 +1227,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, xip_enable(map, chip, adr); op_done: chip->state = FL_READY; + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); @@ -1251,10 +1245,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, unsigned long ofs, chipstart; DECLARE_WAITQUEUE(wait, current); - *retlen = 0; - if (!len) - return 0; - chipnum = to >> cfi->chipshift; ofs = to - (chipnum << cfi->chipshift); chipstart = cfi->chips[chipnum].start; @@ -1476,6 +1466,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, ret = -EIO; op_done: chip->state = FL_READY; + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); @@ -1493,10 +1484,6 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, int chipnum; unsigned long ofs; - *retlen = 0; - if (!len) - return 0; - chipnum = to >> cfi->chipshift; ofs = to - (chipnum << cfi->chipshift); @@ -1562,6 +1549,238 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, return 0; } +/* + * Wait for the flash chip to become ready to write data + * + * This is only called during the panic_write() path. When panic_write() + * is called, the kernel is in the process of a panic, and will soon be + * dead. Therefore we don't take any locks, and attempt to get access + * to the chip as soon as possible. + */ +static int cfi_amdstd_panic_wait(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + int retries = 10; + int i; + + /* + * If the driver thinks the chip is idle, and no toggle bits + * are changing, then the chip is actually idle for sure. + */ + if (chip->state == FL_READY && chip_ready(map, adr)) + return 0; + + /* + * Try several times to reset the chip and then wait for it + * to become idle. The upper limit of a few milliseconds of + * delay isn't a big problem: the kernel is dying anyway. It + * is more important to save the messages. + */ + while (retries > 0) { + const unsigned long timeo = (HZ / 1000) + 1; + + /* send the reset command */ + map_write(map, CMD(0xF0), chip->start); + + /* wait for the chip to become ready */ + for (i = 0; i < jiffies_to_usecs(timeo); i++) { + if (chip_ready(map, adr)) + return 0; + + udelay(1); + } + } + + /* the chip never became ready */ + return -EBUSY; +} + +/* + * Write out one word of data to a single flash chip during a kernel panic + * + * This is only called during the panic_write() path. When panic_write() + * is called, the kernel is in the process of a panic, and will soon be + * dead. Therefore we don't take any locks, and attempt to get access + * to the chip as soon as possible. + * + * The implementation of this routine is intentionally similar to + * do_write_oneword(), in order to ease code maintenance. + */ +static int do_panic_write_oneword(struct map_info *map, struct flchip *chip, + unsigned long adr, map_word datum) +{ + const unsigned long uWriteTimeout = (HZ / 1000) + 1; + struct cfi_private *cfi = map->fldrv_priv; + int retry_cnt = 0; + map_word oldd; + int ret = 0; + int i; + + adr += chip->start; + + ret = cfi_amdstd_panic_wait(map, chip, adr); + if (ret) + return ret; + + pr_debug("MTD %s(): PANIC WRITE 0x%.8lx(0x%.8lx)\n", + __func__, adr, datum.x[0]); + + /* + * Check for a NOP for the case when the datum to write is already + * present - it saves time and works around buggy chips that corrupt + * data at other locations when 0xff is written to a location that + * already contains 0xff. + */ + oldd = map_read(map, adr); + if (map_word_equal(map, oldd, datum)) { + pr_debug("MTD %s(): NOP\n", __func__); + goto op_done; + } + + ENABLE_VPP(map); + +retry: + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + map_write(map, datum, adr); + + for (i = 0; i < jiffies_to_usecs(uWriteTimeout); i++) { + if (chip_ready(map, adr)) + break; + + udelay(1); + } + + if (!chip_good(map, adr, datum)) { + /* reset on all failures. */ + map_write(map, CMD(0xF0), chip->start); + /* FIXME - should have reset delay before continuing */ + + if (++retry_cnt <= MAX_WORD_RETRIES) + goto retry; + + ret = -EIO; + } + +op_done: + DISABLE_VPP(map); + return ret; +} + +/* + * Write out some data during a kernel panic + * + * This is used by the mtdoops driver to save the dying messages from a + * kernel which has panic'd. + * + * This routine ignores all of the locking used throughout the rest of the + * driver, in order to ensure that the data gets written out no matter what + * state this driver (and the flash chip itself) was in when the kernel crashed. + * + * The implementation of this routine is intentionally similar to + * cfi_amdstd_write_words(), in order to ease code maintenance. + */ +static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs, chipstart; + int ret = 0; + int chipnum; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + chipstart = cfi->chips[chipnum].start; + + /* If it's not bus aligned, do the first byte write */ + if (ofs & (map_bankwidth(map) - 1)) { + unsigned long bus_ofs = ofs & ~(map_bankwidth(map) - 1); + int i = ofs - bus_ofs; + int n = 0; + map_word tmp_buf; + + ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], bus_ofs); + if (ret) + return ret; + + /* Load 'tmp_buf' with old contents of flash */ + tmp_buf = map_read(map, bus_ofs + chipstart); + + /* Number of bytes to copy from buffer */ + n = min_t(int, len, map_bankwidth(map) - i); + + tmp_buf = map_word_load_partial(map, tmp_buf, buf, i, n); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + bus_ofs, tmp_buf); + if (ret) + return ret; + + ofs += n; + buf += n; + (*retlen) += n; + len -= n; + + if (ofs >> cfi->chipshift) { + chipnum++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + /* We are now aligned, write as much as possible */ + while (len >= map_bankwidth(map)) { + map_word datum; + + datum = map_word_load(map, buf); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + ofs, datum); + if (ret) + return ret; + + ofs += map_bankwidth(map); + buf += map_bankwidth(map); + (*retlen) += map_bankwidth(map); + len -= map_bankwidth(map); + + if (ofs >> cfi->chipshift) { + chipnum++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + + chipstart = cfi->chips[chipnum].start; + } + } + + /* Write the trailing bytes if any */ + if (len & (map_bankwidth(map) - 1)) { + map_word tmp_buf; + + ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], ofs); + if (ret) + return ret; + + tmp_buf = map_read(map, ofs + chipstart); + + tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + ofs, tmp_buf); + if (ret) + return ret; + + (*retlen) += len; + } + + return 0; +} + /* * Handle devices with one erase region, that only implement @@ -1649,6 +1868,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) chip->state = FL_READY; xip_enable(map, chip, adr); + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); @@ -1739,6 +1959,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, } chip->state = FL_READY; + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index 85e80180b65b..096993f9711e 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -228,15 +228,15 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map) } /* Also select the correct geometry setup too */ - mtd->erase = cfi_staa_erase_varsize; - mtd->read = cfi_staa_read; - mtd->write = cfi_staa_write_buffers; - mtd->writev = cfi_staa_writev; - mtd->sync = cfi_staa_sync; - mtd->lock = cfi_staa_lock; - mtd->unlock = cfi_staa_unlock; - mtd->suspend = cfi_staa_suspend; - mtd->resume = cfi_staa_resume; + mtd->_erase = cfi_staa_erase_varsize; + mtd->_read = cfi_staa_read; + mtd->_write = cfi_staa_write_buffers; + mtd->_writev = cfi_staa_writev; + mtd->_sync = cfi_staa_sync; + mtd->_lock = cfi_staa_lock; + mtd->_unlock = cfi_staa_unlock; + mtd->_suspend = cfi_staa_suspend; + mtd->_resume = cfi_staa_resume; mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE; mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */ mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; @@ -394,8 +394,6 @@ static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - *retlen = 0; - while (len) { unsigned long thislen; @@ -617,10 +615,6 @@ static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to, int chipnum; unsigned long ofs; - *retlen = 0; - if (!len) - return 0; - chipnum = to >> cfi->chipshift; ofs = to - (chipnum << cfi->chipshift); @@ -904,12 +898,6 @@ static int cfi_staa_erase_varsize(struct mtd_info *mtd, int i, first; struct mtd_erase_region_info *regions = mtd->eraseregions; - if (instr->addr > mtd->size) - return -EINVAL; - - if ((instr->len + instr->addr) > mtd->size) - return -EINVAL; - /* Check that both start and end of the requested erase are * aligned with the erasesize at the appropriate addresses. */ @@ -1155,9 +1143,6 @@ static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (len & (mtd->erasesize -1)) return -EINVAL; - if ((len + ofs) > mtd->size) - return -EINVAL; - chipnum = ofs >> cfi->chipshift; adr = ofs - (chipnum << cfi->chipshift); diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 8e464054a631..f992418f40a8 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -173,12 +173,6 @@ int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, int i, first; struct mtd_erase_region_info *regions = mtd->eraseregions; - if (ofs > mtd->size) - return -EINVAL; - - if ((len + ofs) > mtd->size) - return -EINVAL; - /* Check that both start and end of the requested erase are * aligned with the erasesize at the appropriate addresses. */ diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h index 89c6595454a5..800b0e853e86 100644 --- a/drivers/mtd/chips/fwh_lock.h +++ b/drivers/mtd/chips/fwh_lock.h @@ -101,7 +101,7 @@ static void fixup_use_fwh_lock(struct mtd_info *mtd) { printk(KERN_NOTICE "using fwh lock/unlock method\n"); /* Setup for the chips with the fwh lock method */ - mtd->lock = fwh_lock_varsize; - mtd->unlock = fwh_unlock_varsize; + mtd->_lock = fwh_lock_varsize; + mtd->_unlock = fwh_unlock_varsize; } #endif /* FWH_LOCK_H */ diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c index f2b872946871..f7a5bca92aef 100644 --- a/drivers/mtd/chips/map_absent.c +++ b/drivers/mtd/chips/map_absent.c @@ -55,10 +55,10 @@ static struct mtd_info *map_absent_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_ABSENT; mtd->size = map->size; - mtd->erase = map_absent_erase; - mtd->read = map_absent_read; - mtd->write = map_absent_write; - mtd->sync = map_absent_sync; + mtd->_erase = map_absent_erase; + mtd->_read = map_absent_read; + mtd->_write = map_absent_write; + mtd->_sync = map_absent_sync; mtd->flags = 0; mtd->erasesize = PAGE_SIZE; mtd->writesize = 1; @@ -70,13 +70,11 @@ static struct mtd_info *map_absent_probe(struct map_info *map) static int map_absent_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - *retlen = 0; return -ENODEV; } static int map_absent_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - *retlen = 0; return -ENODEV; } diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c index 67640ccb2d41..991c2a1c05d3 100644 --- a/drivers/mtd/chips/map_ram.c +++ b/drivers/mtd/chips/map_ram.c @@ -64,11 +64,11 @@ static struct mtd_info *map_ram_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_RAM; mtd->size = map->size; - mtd->erase = mapram_erase; - mtd->get_unmapped_area = mapram_unmapped_area; - mtd->read = mapram_read; - mtd->write = mapram_write; - mtd->sync = mapram_nop; + mtd->_erase = mapram_erase; + mtd->_get_unmapped_area = mapram_unmapped_area; + mtd->_read = mapram_read; + mtd->_write = mapram_write; + mtd->_sync = mapram_nop; mtd->flags = MTD_CAP_RAM; mtd->writesize = 1; @@ -122,14 +122,10 @@ static int mapram_erase (struct mtd_info *mtd, struct erase_info *instr) unsigned long i; allff = map_word_ff(map); - for (i=0; i<instr->len; i += map_bankwidth(map)) map_write(map, allff, instr->addr + i); - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return 0; } diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index 593f73d480d2..47a43cf7e5c6 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -41,11 +41,11 @@ static struct mtd_info *map_rom_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_ROM; mtd->size = map->size; - mtd->get_unmapped_area = maprom_unmapped_area; - mtd->read = maprom_read; - mtd->write = maprom_write; - mtd->sync = maprom_nop; - mtd->erase = maprom_erase; + mtd->_get_unmapped_area = maprom_unmapped_area; + mtd->_read = maprom_read; + mtd->_write = maprom_write; + mtd->_sync = maprom_nop; + mtd->_erase = maprom_erase; mtd->flags = MTD_CAP_ROM; mtd->erasesize = map->size; mtd->writesize = 1; @@ -85,8 +85,7 @@ static void maprom_nop(struct mtd_info *mtd) static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - printk(KERN_NOTICE "maprom_write called\n"); - return -EIO; + return -EROFS; } static int maprom_erase (struct mtd_info *mtd, struct erase_info *info) diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 8d3dac40d7e6..4cdb2af7bf44 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -103,6 +103,13 @@ config M25PXX_USE_FAST_READ help This option enables FAST_READ access supported by ST M25Pxx. +config MTD_SPEAR_SMI + tristate "SPEAR MTD NOR Support through SMI controller" + depends on PLAT_SPEAR + default y + help + This enable SNOR support on SPEAR platforms using SMI controller + config MTD_SST25L tristate "Support SST25L (non JEDEC) SPI Flash chips" depends on SPI_MASTER diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 56c7cd462f11..a4dd1d822b6c 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o CFLAGS_docg3.o += -I$(src)
\ No newline at end of file diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index e7e46d1e7463..a4a80b742e65 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -104,14 +104,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len, int offset = from & (PAGE_SIZE-1); int cpylen; - if (from > mtd->size) - return -EINVAL; - if (from + len > mtd->size) - len = mtd->size - from; - - if (retlen) - *retlen = 0; - while (len) { if ((offset + len) > PAGE_SIZE) cpylen = PAGE_SIZE - offset; // multiple pages @@ -148,8 +140,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf, int offset = to & ~PAGE_MASK; // page offset int cpylen; - if (retlen) - *retlen = 0; while (len) { if ((offset+len) > PAGE_SIZE) cpylen = PAGE_SIZE - offset; // multiple pages @@ -188,13 +178,6 @@ static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len, struct block2mtd_dev *dev = mtd->priv; int err; - if (!len) - return 0; - if (to >= mtd->size) - return -ENOSPC; - if (to + len > mtd->size) - len = mtd->size - to; - mutex_lock(&dev->write_mutex); err = _block2mtd_write(dev, buf, to, len, retlen); mutex_unlock(&dev->write_mutex); @@ -283,13 +266,14 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; dev->mtd.erasesize = erase_size; dev->mtd.writesize = 1; + dev->mtd.writebufsize = PAGE_SIZE; dev->mtd.type = MTD_RAM; dev->mtd.flags = MTD_CAP_RAM; - dev->mtd.erase = block2mtd_erase; - dev->mtd.write = block2mtd_write; - dev->mtd.writev = mtd_writev; - dev->mtd.sync = block2mtd_sync; - dev->mtd.read = block2mtd_read; + dev->mtd._erase = block2mtd_erase; + dev->mtd._write = block2mtd_write; + dev->mtd._writev = mtd_writev; + dev->mtd._sync = block2mtd_sync; + dev->mtd._read = block2mtd_read; dev->mtd.priv = dev; dev->mtd.owner = THIS_MODULE; diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c index b1cdf6479019..a4eb8b5b85ec 100644 --- a/drivers/mtd/devices/doc2000.c +++ b/drivers/mtd/devices/doc2000.c @@ -562,14 +562,15 @@ void DoC2k_init(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; mutex_init(&this->lock); @@ -602,13 +603,7 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, int i, len256 = 0, ret=0; size_t left = len; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - mutex_lock(&this->lock); - - *retlen = 0; while (left) { len = left; @@ -748,13 +743,7 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, size_t left = len; int status; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - mutex_lock(&this->lock); - - *retlen = 0; while (left) { len = left; diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c index 7543b98f46c4..f6927955dab0 100644 --- a/drivers/mtd/devices/doc2001.c +++ b/drivers/mtd/devices/doc2001.c @@ -346,14 +346,15 @@ void DoCMil_init(struct mtd_info *mtd) /* FIXME: erase size is not always 8KiB */ mtd->erasesize = 0x2000; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; @@ -383,10 +384,6 @@ static int doc_read (struct mtd_info *mtd, loff_t from, size_t len, void __iomem *docptr = this->virtadr; struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - /* Don't allow a single read to cross a 512-byte block boundary */ if (from + len > ((from | 0x1ff) + 1)) len = ((from | 0x1ff) + 1) - from; @@ -494,10 +491,6 @@ static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, void __iomem *docptr = this->virtadr; struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - #if 0 /* Don't allow a single write to cross a 512-byte block boundary */ if (to + len > ( (to | 0x1ff) + 1)) @@ -599,7 +592,6 @@ static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, printk("Error programming flash\n"); /* Error in programming FIXME: implement Bad Block Replacement (in nftl.c ??) */ - *retlen = 0; ret = -EIO; } dummy = ReadDOC(docptr, LastDataRead); diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 177510d0e7ee..04eb2e4aa50f 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -467,14 +467,15 @@ void DoCMilPlus_init(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; @@ -581,10 +582,6 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, void __iomem * docptr = this->virtadr; struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - /* Don't allow a single read to cross a 512-byte block boundary */ if (from + len > ((from | 0x1ff) + 1)) len = ((from | 0x1ff) + 1) - from; @@ -700,10 +697,6 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, void __iomem * docptr = this->virtadr; struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - /* Don't allow writes which aren't exactly one block (512 bytes) */ if ((to & 0x1ff) || (len != 0x200)) return -EINVAL; @@ -800,7 +793,6 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, printk("MTD: Error 0x%x programming at 0x%x\n", dummy, (int)to); /* Error in programming FIXME: implement Bad Block Replacement (in nftl.c ??) */ - *retlen = 0; ret = -EIO; } dummy = ReadDOC(docptr, Mplus_LastDataRead); diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index ad11ef0a81f4..8272c02668d6 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -80,14 +80,9 @@ static struct nand_ecclayout docg3_oobinfo = { .oobavail = 8, }; -/** - * struct docg3_bch - BCH engine - */ -static struct bch_control *docg3_bch; - static inline u8 doc_readb(struct docg3 *docg3, u16 reg) { - u8 val = readb(docg3->base + reg); + u8 val = readb(docg3->cascade->base + reg); trace_docg3_io(0, 8, reg, (int)val); return val; @@ -95,7 +90,7 @@ static inline u8 doc_readb(struct docg3 *docg3, u16 reg) static inline u16 doc_readw(struct docg3 *docg3, u16 reg) { - u16 val = readw(docg3->base + reg); + u16 val = readw(docg3->cascade->base + reg); trace_docg3_io(0, 16, reg, (int)val); return val; @@ -103,13 +98,13 @@ static inline u16 doc_readw(struct docg3 *docg3, u16 reg) static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg) { - writeb(val, docg3->base + reg); + writeb(val, docg3->cascade->base + reg); trace_docg3_io(1, 8, reg, val); } static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg) { - writew(val, docg3->base + reg); + writew(val, docg3->cascade->base + reg); trace_docg3_io(1, 16, reg, val); } @@ -643,7 +638,8 @@ static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc) for (i = 0; i < DOC_ECC_BCH_SIZE; i++) ecc[i] = bitrev8(hwecc[i]); - numerrs = decode_bch(docg3_bch, NULL, DOC_ECC_BCH_COVERED_BYTES, + numerrs = decode_bch(docg3->cascade->bch, NULL, + DOC_ECC_BCH_COVERED_BYTES, NULL, ecc, NULL, errorpos); BUG_ON(numerrs == -EINVAL); if (numerrs < 0) @@ -734,7 +730,7 @@ err: * doc_read_page_getbytes - Reads bytes from a prepared page * @docg3: the device * @len: the number of bytes to be read (must be a multiple of 4) - * @buf: the buffer to be filled in + * @buf: the buffer to be filled in (or NULL is forget bytes) * @first: 1 if first time read, DOC_READADDRESS should be set * */ @@ -849,7 +845,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { struct docg3 *docg3 = mtd->priv; - int block0, block1, page, ret, ofs = 0; + int block0, block1, page, ret, skip, ofs = 0; u8 *oobbuf = ops->oobbuf; u8 *buf = ops->datbuf; size_t len, ooblen, nbdata, nboob; @@ -869,34 +865,36 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, doc_dbg("doc_read_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n", from, ops->mode, buf, len, oobbuf, ooblen); - if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % DOC_LAYOUT_OOB_SIZE) || - (from % DOC_LAYOUT_PAGE_SIZE)) + if (ooblen % DOC_LAYOUT_OOB_SIZE) return -EINVAL; - ret = -EINVAL; - calc_block_sector(from + len, &block0, &block1, &page, &ofs, - docg3->reliable); - if (block1 > docg3->max_block) - goto err; + if (from + len > mtd->size) + return -EINVAL; ops->oobretlen = 0; ops->retlen = 0; ret = 0; + skip = from % DOC_LAYOUT_PAGE_SIZE; + mutex_lock(&docg3->cascade->lock); while (!ret && (len > 0 || ooblen > 0)) { - calc_block_sector(from, &block0, &block1, &page, &ofs, + calc_block_sector(from - skip, &block0, &block1, &page, &ofs, docg3->reliable); - nbdata = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE); + nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip); nboob = min_t(size_t, ooblen, (size_t)DOC_LAYOUT_OOB_SIZE); ret = doc_read_page_prepare(docg3, block0, block1, page, ofs); if (ret < 0) - goto err; + goto out; ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES); if (ret < 0) goto err_in_read; - ret = doc_read_page_getbytes(docg3, nbdata, buf, 1); + ret = doc_read_page_getbytes(docg3, skip, NULL, 1); + if (ret < skip) + goto err_in_read; + ret = doc_read_page_getbytes(docg3, nbdata, buf, 0); if (ret < nbdata) goto err_in_read; - doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE - nbdata, + doc_read_page_getbytes(docg3, + DOC_LAYOUT_PAGE_SIZE - nbdata - skip, NULL, 0); ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0); if (ret < nboob) @@ -950,13 +948,15 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, len -= nbdata; ooblen -= nboob; from += DOC_LAYOUT_PAGE_SIZE; + skip = 0; } +out: + mutex_unlock(&docg3->cascade->lock); return ret; err_in_read: doc_read_page_finish(docg3); -err: - return ret; + goto out; } /** @@ -1114,10 +1114,10 @@ static int doc_get_op_status(struct docg3 *docg3) */ static int doc_write_erase_wait_status(struct docg3 *docg3) { - int status, ret = 0; + int i, status, ret = 0; - if (!doc_is_ready(docg3)) - usleep_range(3000, 3000); + for (i = 0; !doc_is_ready(docg3) && i < 5; i++) + msleep(20); if (!doc_is_ready(docg3)) { doc_dbg("Timeout reached and the chip is still not ready\n"); ret = -EAGAIN; @@ -1196,18 +1196,19 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *info) int block0, block1, page, ret, ofs = 0; doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len); - doc_set_device_id(docg3, docg3->device_id); info->state = MTD_ERASE_PENDING; calc_block_sector(info->addr + info->len, &block0, &block1, &page, &ofs, docg3->reliable); ret = -EINVAL; - if (block1 > docg3->max_block || page || ofs) + if (info->addr + info->len > mtd->size || page || ofs) goto reset_err; ret = 0; calc_block_sector(info->addr, &block0, &block1, &page, &ofs, docg3->reliable); + mutex_lock(&docg3->cascade->lock); + doc_set_device_id(docg3, docg3->device_id); doc_set_reliable_mode(docg3); for (len = info->len; !ret && len > 0; len -= mtd->erasesize) { info->state = MTD_ERASING; @@ -1215,6 +1216,7 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *info) block0 += 2; block1 += 2; } + mutex_unlock(&docg3->cascade->lock); if (ret) goto reset_err; @@ -1401,7 +1403,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, struct mtd_oob_ops *ops) { struct docg3 *docg3 = mtd->priv; - int block0, block1, page, ret, pofs = 0, autoecc, oobdelta; + int ret, autoecc, oobdelta; u8 *oobbuf = ops->oobbuf; u8 *buf = ops->datbuf; size_t len, ooblen; @@ -1438,12 +1440,8 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, if (len && ooblen && (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta)) return -EINVAL; - - ret = -EINVAL; - calc_block_sector(ofs + len, &block0, &block1, &page, &pofs, - docg3->reliable); - if (block1 > docg3->max_block) - goto err; + if (ofs + len > mtd->size) + return -EINVAL; ops->oobretlen = 0; ops->retlen = 0; @@ -1457,6 +1455,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, if (autoecc < 0) return autoecc; + mutex_lock(&docg3->cascade->lock); while (!ret && len > 0) { memset(oob, 0, sizeof(oob)); if (ofs == docg3->oob_write_ofs) @@ -1477,8 +1476,9 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, } ops->retlen += DOC_LAYOUT_PAGE_SIZE; } -err: + doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return ret; } @@ -1535,9 +1535,11 @@ static ssize_t dps0_is_key_locked(struct device *dev, struct docg3 *docg3 = sysfs_dev2docg3(dev, attr); int dps0; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return sprintf(buf, "%d\n", !(dps0 & DOC_DPS_KEY_OK)); } @@ -1548,9 +1550,11 @@ static ssize_t dps1_is_key_locked(struct device *dev, struct docg3 *docg3 = sysfs_dev2docg3(dev, attr); int dps1; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return sprintf(buf, "%d\n", !(dps1 & DOC_DPS_KEY_OK)); } @@ -1565,10 +1569,12 @@ static ssize_t dps0_insert_key(struct device *dev, if (count != DOC_LAYOUT_DPS_KEY_LENGTH) return -EINVAL; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++) doc_writeb(docg3, buf[i], DOC_DPS0_KEY); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return count; } @@ -1582,10 +1588,12 @@ static ssize_t dps1_insert_key(struct device *dev, if (count != DOC_LAYOUT_DPS_KEY_LENGTH) return -EINVAL; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++) doc_writeb(docg3, buf[i], DOC_DPS1_KEY); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return count; } @@ -1601,13 +1609,13 @@ static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = { }; static int doc_register_sysfs(struct platform_device *pdev, - struct mtd_info **floors) + struct docg3_cascade *cascade) { int ret = 0, floor, i = 0; struct device *dev = &pdev->dev; - for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS && floors[floor]; - floor++) + for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS && + cascade->floors[floor]; floor++) for (i = 0; !ret && i < 4; i++) ret = device_create_file(dev, &doc_sys_attrs[floor][i]); if (!ret) @@ -1621,12 +1629,12 @@ static int doc_register_sysfs(struct platform_device *pdev, } static void doc_unregister_sysfs(struct platform_device *pdev, - struct mtd_info **floors) + struct docg3_cascade *cascade) { struct device *dev = &pdev->dev; int floor, i; - for (floor = 0; floor < DOC_MAX_NBFLOORS && floors[floor]; + for (floor = 0; floor < DOC_MAX_NBFLOORS && cascade->floors[floor]; floor++) for (i = 0; i < 4; i++) device_remove_file(dev, &doc_sys_attrs[floor][i]); @@ -1640,7 +1648,11 @@ static int dbg_flashctrl_show(struct seq_file *s, void *p) struct docg3 *docg3 = (struct docg3 *)s->private; int pos = 0; - u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + u8 fctrl; + + mutex_lock(&docg3->cascade->lock); + fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n", @@ -1658,9 +1670,12 @@ static int dbg_asicmode_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; - int pos = 0; - int pctrl = doc_register_readb(docg3, DOC_ASICMODE); - int mode = pctrl & 0x03; + int pos = 0, pctrl, mode; + + mutex_lock(&docg3->cascade->lock); + pctrl = doc_register_readb(docg3, DOC_ASICMODE); + mode = pctrl & 0x03; + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (", @@ -1692,7 +1707,11 @@ static int dbg_device_id_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; int pos = 0; - int id = doc_register_readb(docg3, DOC_DEVICESELECT); + int id; + + mutex_lock(&docg3->cascade->lock); + id = doc_register_readb(docg3, DOC_DEVICESELECT); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "DeviceId = %d\n", id); return pos; @@ -1705,6 +1724,7 @@ static int dbg_protection_show(struct seq_file *s, void *p) int pos = 0; int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high; + mutex_lock(&docg3->cascade->lock); protect = doc_register_readb(docg3, DOC_PROTECTION); dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS); dps0_low = doc_register_readw(docg3, DOC_DPS0_ADDRLOW); @@ -1712,6 +1732,7 @@ static int dbg_protection_show(struct seq_file *s, void *p) dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS); dps1_low = doc_register_readw(docg3, DOC_DPS1_ADDRLOW); dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "Protection = 0x%02x (", protect); @@ -1804,7 +1825,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) switch (chip_id) { case DOC_CHIPID_G3: - mtd->name = kasprintf(GFP_KERNEL, "DiskOnChip G3 floor %d", + mtd->name = kasprintf(GFP_KERNEL, "docg3.%d", docg3->device_id); docg3->max_block = 2047; break; @@ -1817,16 +1838,17 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES; if (docg3->reliable == 2) mtd->erasesize /= 2; - mtd->writesize = DOC_LAYOUT_PAGE_SIZE; + mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE; mtd->oobsize = DOC_LAYOUT_OOB_SIZE; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; - mtd->block_isbad = doc_block_isbad; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; + mtd->_block_isbad = doc_block_isbad; mtd->ecclayout = &docg3_oobinfo; + mtd->ecc_strength = DOC_ECC_BCH_T; } /** @@ -1834,6 +1856,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) * @base: the io space where the device is probed * @floor: the floor of the probed device * @dev: the device + * @cascade: the cascade of chips this devices will belong to * * Checks whether a device at the specified IO range, and floor is available. * @@ -1841,8 +1864,8 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) * if a memory allocation failed. If floor 0 is checked, a reset of the ASIC is * launched. */ -static struct mtd_info *doc_probe_device(void __iomem *base, int floor, - struct device *dev) +static struct mtd_info * __init +doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev) { int ret, bbt_nbpages; u16 chip_id, chip_id_inv; @@ -1865,7 +1888,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor, docg3->dev = dev; docg3->device_id = floor; - docg3->base = base; + docg3->cascade = cascade; doc_set_device_id(docg3, docg3->device_id); if (!floor) doc_set_asic_mode(docg3, DOC_ASICMODE_RESET); @@ -1882,7 +1905,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor, switch (chip_id) { case DOC_CHIPID_G3: doc_info("Found a G3 DiskOnChip at addr %p, floor %d\n", - base, floor); + docg3->cascade->base, floor); break; default: doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id); @@ -1927,10 +1950,12 @@ static void doc_release_device(struct mtd_info *mtd) static int docg3_resume(struct platform_device *pdev) { int i; + struct docg3_cascade *cascade; struct mtd_info **docg3_floors, *mtd; struct docg3 *docg3; - docg3_floors = platform_get_drvdata(pdev); + cascade = platform_get_drvdata(pdev); + docg3_floors = cascade->floors; mtd = docg3_floors[0]; docg3 = mtd->priv; @@ -1952,11 +1977,13 @@ static int docg3_resume(struct platform_device *pdev) static int docg3_suspend(struct platform_device *pdev, pm_message_t state) { int floor, i; + struct docg3_cascade *cascade; struct mtd_info **docg3_floors, *mtd; struct docg3 *docg3; u8 ctrl, pwr_down; - docg3_floors = platform_get_drvdata(pdev); + cascade = platform_get_drvdata(pdev); + docg3_floors = cascade->floors; for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) { mtd = docg3_floors[floor]; if (!mtd) @@ -2006,7 +2033,7 @@ static int __init docg3_probe(struct platform_device *pdev) struct resource *ress; void __iomem *base; int ret, floor, found = 0; - struct mtd_info **docg3_floors; + struct docg3_cascade *cascade; ret = -ENXIO; ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -2017,17 +2044,19 @@ static int __init docg3_probe(struct platform_device *pdev) base = ioremap(ress->start, DOC_IOSPACE_SIZE); ret = -ENOMEM; - docg3_floors = kzalloc(sizeof(*docg3_floors) * DOC_MAX_NBFLOORS, - GFP_KERNEL); - if (!docg3_floors) + cascade = kzalloc(sizeof(*cascade) * DOC_MAX_NBFLOORS, + GFP_KERNEL); + if (!cascade) goto nomem1; - docg3_bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T, + cascade->base = base; + mutex_init(&cascade->lock); + cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T, DOC_ECC_BCH_PRIMPOLY); - if (!docg3_bch) + if (!cascade->bch) goto nomem2; for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) { - mtd = doc_probe_device(base, floor, dev); + mtd = doc_probe_device(cascade, floor, dev); if (IS_ERR(mtd)) { ret = PTR_ERR(mtd); goto err_probe; @@ -2038,7 +2067,7 @@ static int __init docg3_probe(struct platform_device *pdev) else continue; } - docg3_floors[floor] = mtd; + cascade->floors[floor] = mtd; ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0); if (ret) @@ -2046,26 +2075,26 @@ static int __init docg3_probe(struct platform_device *pdev) found++; } - ret = doc_register_sysfs(pdev, docg3_floors); + ret = doc_register_sysfs(pdev, cascade); if (ret) goto err_probe; if (!found) goto notfound; - platform_set_drvdata(pdev, docg3_floors); - doc_dbg_register(docg3_floors[0]->priv); + platform_set_drvdata(pdev, cascade); + doc_dbg_register(cascade->floors[0]->priv); return 0; notfound: ret = -ENODEV; dev_info(dev, "No supported DiskOnChip found\n"); err_probe: - free_bch(docg3_bch); + kfree(cascade->bch); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) - if (docg3_floors[floor]) - doc_release_device(docg3_floors[floor]); + if (cascade->floors[floor]) + doc_release_device(cascade->floors[floor]); nomem2: - kfree(docg3_floors); + kfree(cascade); nomem1: iounmap(base); noress: @@ -2080,19 +2109,19 @@ noress: */ static int __exit docg3_release(struct platform_device *pdev) { - struct mtd_info **docg3_floors = platform_get_drvdata(pdev); - struct docg3 *docg3 = docg3_floors[0]->priv; - void __iomem *base = docg3->base; + struct docg3_cascade *cascade = platform_get_drvdata(pdev); + struct docg3 *docg3 = cascade->floors[0]->priv; + void __iomem *base = cascade->base; int floor; - doc_unregister_sysfs(pdev, docg3_floors); + doc_unregister_sysfs(pdev, cascade); doc_dbg_unregister(docg3); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) - if (docg3_floors[floor]) - doc_release_device(docg3_floors[floor]); + if (cascade->floors[floor]) + doc_release_device(cascade->floors[floor]); - kfree(docg3_floors); - free_bch(docg3_bch); + free_bch(docg3->cascade->bch); + kfree(cascade); iounmap(base); return 0; } diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h index db0da436b493..19fb93f96a3a 100644 --- a/drivers/mtd/devices/docg3.h +++ b/drivers/mtd/devices/docg3.h @@ -22,6 +22,8 @@ #ifndef _MTD_DOCG3_H #define _MTD_DOCG3_H +#include <linux/mtd/mtd.h> + /* * Flash memory areas : * - 0x0000 .. 0x07ff : IPL @@ -267,9 +269,23 @@ #define DOC_LAYOUT_DPS_KEY_LENGTH 8 /** + * struct docg3_cascade - Cascade of 1 to 4 docg3 chips + * @floors: floors (ie. one physical docg3 chip is one floor) + * @base: IO space to access all chips in the cascade + * @bch: the BCH correcting control structure + * @lock: lock to protect docg3 IO space from concurrent accesses + */ +struct docg3_cascade { + struct mtd_info *floors[DOC_MAX_NBFLOORS]; + void __iomem *base; + struct bch_control *bch; + struct mutex lock; +}; + +/** * struct docg3 - DiskOnChip driver private data * @dev: the device currently under control - * @base: mapped IO space + * @cascade: the cascade this device belongs to * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3) * @if_cfg: if true, reads are on 16bits, else reads are on 8bits @@ -287,7 +303,7 @@ */ struct docg3 { struct device *dev; - void __iomem *base; + struct docg3_cascade *cascade; unsigned int device_id:4; unsigned int if_cfg:1; unsigned int reliable:2; diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 3a11ea628e58..82bd00af5cc3 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -367,9 +367,6 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr) printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len); #endif - /* sanity checks */ - if (instr->addr + instr->len > mtd->size) return (-EINVAL); - /* * check that both start and end of the requested erase are * aligned with the erasesize at the appropriate addresses. @@ -440,10 +437,6 @@ static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retle printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len); #endif - /* sanity checks */ - if (!len) return (0); - if (from + len > mtd->size) return (-EINVAL); - /* we always read len bytes */ *retlen = len; @@ -522,11 +515,8 @@ static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len); #endif - *retlen = 0; - /* sanity checks */ if (!len) return (0); - if (to + len > mtd->size) return (-EINVAL); /* first, we write a 0xFF.... padded byte until we reach a dword boundary */ if (to & (BUSWIDTH - 1)) @@ -630,14 +620,15 @@ static int __init lart_flash_init (void) mtd.name = module_name; mtd.type = MTD_NORFLASH; mtd.writesize = 1; + mtd.writebufsize = 4; mtd.flags = MTD_CAP_NORFLASH; mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN; mtd.erasesize = FLASH_BLOCKSIZE_MAIN; mtd.numeraseregions = ARRAY_SIZE(erase_regions); mtd.eraseregions = erase_regions; - mtd.erase = flash_erase; - mtd.read = flash_read; - mtd.write = flash_write; + mtd._erase = flash_erase; + mtd._read = flash_read; + mtd._write = flash_write; mtd.owner = THIS_MODULE; #ifdef LART_DEBUG diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 7c60dddbefc0..1924d247c1cb 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -288,9 +288,6 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) __func__, (long long)instr->addr, (long long)instr->len); - /* sanity checks */ - if (instr->addr + instr->len > flash->mtd.size) - return -EINVAL; div_u64_rem(instr->len, mtd->erasesize, &rem); if (rem) return -EINVAL; @@ -349,13 +346,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)from, len); - /* sanity checks */ - if (!len) - return 0; - - if (from + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -371,9 +361,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, t[1].len = len; spi_message_add_tail(&t[1], &m); - /* Byte count starts at zero. */ - *retlen = 0; - mutex_lock(&flash->lock); /* Wait till previous write/erase is done. */ @@ -417,15 +404,6 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)to, len); - *retlen = 0; - - /* sanity checks */ - if (!len) - return(0); - - if (to + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -509,15 +487,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)to, len); - *retlen = 0; - - /* sanity checks */ - if (!len) - return 0; - - if (to + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -908,14 +877,14 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.writesize = 1; flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.size = info->sector_size * info->n_sectors; - flash->mtd.erase = m25p80_erase; - flash->mtd.read = m25p80_read; + flash->mtd._erase = m25p80_erase; + flash->mtd._read = m25p80_read; /* sst flash chips use AAI word program */ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) - flash->mtd.write = sst_write; + flash->mtd._write = sst_write; else - flash->mtd.write = m25p80_write; + flash->mtd._write = m25p80_write; /* prefer "small sector" erase if possible */ if (info->flags & SECT_4K) { @@ -932,6 +901,7 @@ static int __devinit m25p_probe(struct spi_device *spi) ppdata.of_node = spi->dev.of_node; flash->mtd.dev.parent = &spi->dev; flash->page_size = info->page_size; + flash->mtd.writebufsize = flash->page_size; if (info->addr_width) flash->addr_width = info->addr_width; @@ -1004,21 +974,7 @@ static struct spi_driver m25p80_driver = { */ }; - -static int __init m25p80_init(void) -{ - return spi_register_driver(&m25p80_driver); -} - - -static void __exit m25p80_exit(void) -{ - spi_unregister_driver(&m25p80_driver); -} - - -module_init(m25p80_init); -module_exit(m25p80_exit); +module_spi_driver(m25p80_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mike Lavender"); diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index 8423fb6d4f26..182849d39c61 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c @@ -59,12 +59,8 @@ static int ms02nv_read(struct mtd_info *mtd, loff_t from, { struct ms02nv_private *mp = mtd->priv; - if (from + len > mtd->size) - return -EINVAL; - memcpy(buf, mp->uaddr + from, len); *retlen = len; - return 0; } @@ -73,12 +69,8 @@ static int ms02nv_write(struct mtd_info *mtd, loff_t to, { struct ms02nv_private *mp = mtd->priv; - if (to + len > mtd->size) - return -EINVAL; - memcpy(mp->uaddr + to, buf, len); *retlen = len; - return 0; } @@ -215,8 +207,8 @@ static int __init ms02nv_init_one(ulong addr) mtd->size = fixsize; mtd->name = (char *)ms02nv_name; mtd->owner = THIS_MODULE; - mtd->read = ms02nv_read; - mtd->write = ms02nv_write; + mtd->_read = ms02nv_read; + mtd->_write = ms02nv_write; mtd->writesize = 1; ret = -EIO; diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 236057ead0d2..928fb0e6d73a 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -164,9 +164,6 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) dev_name(&spi->dev), (long long)instr->addr, (long long)instr->len); - /* Sanity checks */ - if (instr->addr + instr->len > mtd->size) - return -EINVAL; div_u64_rem(instr->len, priv->page_size, &rem); if (rem) return -EINVAL; @@ -252,14 +249,6 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len)); - *retlen = 0; - - /* Sanity checks */ - if (!len) - return 0; - if (from + len > mtd->size) - return -EINVAL; - /* Calculate flash page/byte address */ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size); @@ -328,14 +317,6 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: write 0x%x..0x%x\n", dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len)); - *retlen = 0; - - /* Sanity checks */ - if (!len) - return 0; - if ((to + len) > mtd->size) - return -EINVAL; - spi_message_init(&msg); x[0].tx_buf = command = priv->command; @@ -490,8 +471,6 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base, if ((off + len) > 64) len = 64 - off; - if (len == 0) - return len; spi_message_init(&m); @@ -611,16 +590,16 @@ static int dataflash_write_user_otp(struct mtd_info *mtd, static char *otp_setup(struct mtd_info *device, char revision) { - device->get_fact_prot_info = dataflash_get_otp_info; - device->read_fact_prot_reg = dataflash_read_fact_otp; - device->get_user_prot_info = dataflash_get_otp_info; - device->read_user_prot_reg = dataflash_read_user_otp; + device->_get_fact_prot_info = dataflash_get_otp_info; + device->_read_fact_prot_reg = dataflash_read_fact_otp; + device->_get_user_prot_info = dataflash_get_otp_info; + device->_read_user_prot_reg = dataflash_read_user_otp; /* rev c parts (at45db321c and at45db1281 only!) use a * different write procedure; not (yet?) implemented. */ if (revision > 'c') - device->write_user_prot_reg = dataflash_write_user_otp; + device->_write_user_prot_reg = dataflash_write_user_otp; return ", OTP"; } @@ -672,9 +651,9 @@ add_dataflash_otp(struct spi_device *spi, char *name, device->owner = THIS_MODULE; device->type = MTD_DATAFLASH; device->flags = MTD_WRITEABLE; - device->erase = dataflash_erase; - device->read = dataflash_read; - device->write = dataflash_write; + device->_erase = dataflash_erase; + device->_read = dataflash_read; + device->_write = dataflash_write; device->priv = priv; device->dev.parent = &spi->dev; @@ -946,18 +925,7 @@ static struct spi_driver dataflash_driver = { /* FIXME: investigate suspend and resume... */ }; -static int __init dataflash_init(void) -{ - return spi_register_driver(&dataflash_driver); -} -module_init(dataflash_init); - -static void __exit dataflash_exit(void) -{ - spi_unregister_driver(&dataflash_driver); -} -module_exit(dataflash_exit); - +module_spi_driver(dataflash_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Andrew Victor, David Brownell"); diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index 2562689ba6b4..ec59d65897fb 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -34,34 +34,23 @@ static struct mtd_info *mtd_info; static int ram_erase(struct mtd_info *mtd, struct erase_info *instr) { - if (instr->addr + instr->len > mtd->size) - return -EINVAL; - memset((char *)mtd->priv + instr->addr, 0xff, instr->len); - instr->state = MTD_ERASE_DONE; mtd_erase_callback(instr); - return 0; } static int ram_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { - if (from + len > mtd->size) - return -EINVAL; - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - *virt = mtd->priv + from; *retlen = len; return 0; } -static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } /* @@ -80,11 +69,7 @@ static unsigned long ram_get_unmapped_area(struct mtd_info *mtd, static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - if (from + len > mtd->size) - return -EINVAL; - memcpy(buf, mtd->priv + from, len); - *retlen = len; return 0; } @@ -92,11 +77,7 @@ static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, static int ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - if (to + len > mtd->size) - return -EINVAL; - memcpy((char *)mtd->priv + to, buf, len); - *retlen = len; return 0; } @@ -126,12 +107,12 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, mtd->priv = mapped_address; mtd->owner = THIS_MODULE; - mtd->erase = ram_erase; - mtd->point = ram_point; - mtd->unpoint = ram_unpoint; - mtd->get_unmapped_area = ram_get_unmapped_area; - mtd->read = ram_read; - mtd->write = ram_write; + mtd->_erase = ram_erase; + mtd->_point = ram_point; + mtd->_unpoint = ram_unpoint; + mtd->_get_unmapped_area = ram_get_unmapped_area; + mtd->_read = ram_read; + mtd->_write = ram_write; if (mtd_device_register(mtd, NULL, 0)) return -EIO; diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 23423bd00b06..67823de68db6 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -33,45 +33,33 @@ struct phram_mtd_list { static LIST_HEAD(phram_list); - static int phram_erase(struct mtd_info *mtd, struct erase_info *instr) { u_char *start = mtd->priv; - if (instr->addr + instr->len > mtd->size) - return -EINVAL; - memset(start + instr->addr, 0xff, instr->len); - /* This'll catch a few races. Free the thing before returning :) + /* + * This'll catch a few races. Free the thing before returning :) * I don't feel at all ashamed. This kind of thing is possible anyway * with flash, but unlikely. */ - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return 0; } static int phram_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { - if (from + len > mtd->size) - return -EINVAL; - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - *virt = mtd->priv + from; *retlen = len; return 0; } -static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } static int phram_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -79,14 +67,7 @@ static int phram_read(struct mtd_info *mtd, loff_t from, size_t len, { u_char *start = mtd->priv; - if (from >= mtd->size) - return -EINVAL; - - if (len > mtd->size - from) - len = mtd->size - from; - memcpy(buf, start + from, len); - *retlen = len; return 0; } @@ -96,20 +77,11 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len, { u_char *start = mtd->priv; - if (to >= mtd->size) - return -EINVAL; - - if (len > mtd->size - to) - len = mtd->size - to; - memcpy(start + to, buf, len); - *retlen = len; return 0; } - - static void unregister_devices(void) { struct phram_mtd_list *this, *safe; @@ -142,11 +114,11 @@ static int register_device(char *name, unsigned long start, unsigned long len) new->mtd.name = name; new->mtd.size = len; new->mtd.flags = MTD_CAP_RAM; - new->mtd.erase = phram_erase; - new->mtd.point = phram_point; - new->mtd.unpoint = phram_unpoint; - new->mtd.read = phram_read; - new->mtd.write = phram_write; + new->mtd._erase = phram_erase; + new->mtd._point = phram_point; + new->mtd._unpoint = phram_unpoint; + new->mtd._read = phram_read; + new->mtd._write = phram_write; new->mtd.owner = THIS_MODULE; new->mtd.type = MTD_RAM; new->mtd.erasesize = PAGE_SIZE; @@ -233,7 +205,17 @@ static inline void kill_final_newline(char *str) return 1; \ } while (0) -static int phram_setup(const char *val, struct kernel_param *kp) +/* + * This shall contain the module parameter if any. It is of the form: + * - phram=<device>,<address>,<size> for module case + * - phram.phram=<device>,<address>,<size> for built-in case + * We leave 64 bytes for the device name, 12 for the address and 12 for the + * size. + * Example: phram.phram=rootfs,0xa0000000,512Mi + */ +static __initdata char phram_paramline[64+12+12]; + +static int __init phram_setup(const char *val) { char buf[64+12+12], *str = buf; char *token[3]; @@ -282,12 +264,28 @@ static int phram_setup(const char *val, struct kernel_param *kp) return ret; } -module_param_call(phram, phram_setup, NULL, NULL, 000); +static int __init phram_param_call(const char *val, struct kernel_param *kp) +{ + /* + * This function is always called before 'init_phram()', whether + * built-in or module. + */ + if (strlen(val) >= sizeof(phram_paramline)) + return -ENOSPC; + strcpy(phram_paramline, val); + + return 0; +} + +module_param_call(phram, phram_param_call, NULL, NULL, 000); MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\""); static int __init init_phram(void) { + if (phram_paramline[0]) + return phram_setup(phram_paramline); + return 0; } diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 5d53c5760a6c..0c51b988e1f8 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -94,12 +94,48 @@ #include <linux/ioctl.h> #include <asm/io.h> #include <linux/pci.h> - #include <linux/mtd/mtd.h> -#include <linux/mtd/pmc551.h> + +#define PMC551_VERSION \ + "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n" + +#define PCI_VENDOR_ID_V3_SEMI 0x11b0 +#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200 + +#define PMC551_PCI_MEM_MAP0 0x50 +#define PMC551_PCI_MEM_MAP1 0x54 +#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000 +#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0 +#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002 +#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001 + +#define PMC551_SDRAM_MA 0x60 +#define PMC551_SDRAM_CMD 0x62 +#define PMC551_DRAM_CFG 0x64 +#define PMC551_SYS_CTRL_REG 0x78 + +#define PMC551_DRAM_BLK0 0x68 +#define PMC551_DRAM_BLK1 0x6c +#define PMC551_DRAM_BLK2 0x70 +#define PMC551_DRAM_BLK3 0x74 +#define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f)) +#define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12)) +#define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8)) + +struct mypriv { + struct pci_dev *dev; + u_char *start; + u32 base_map0; + u32 curr_map0; + u32 asize; + struct mtd_info *nextpmc551; +}; static struct mtd_info *pmc551list; +static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); + static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mypriv *priv = mtd->priv; @@ -115,16 +151,6 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) #endif end = instr->addr + instr->len - 1; - - /* Is it past the end? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", - (long)end, (long)mtd->size); -#endif - return -EINVAL; - } - eoff_hi = end & ~(priv->asize - 1); soff_hi = instr->addr & ~(priv->asize - 1); eoff_lo = end & (priv->asize - 1); @@ -178,18 +204,6 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len); #endif - if (from + len > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", - (long)from + len, (long)mtd->size); -#endif - return -EINVAL; - } - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - soff_hi = from & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); @@ -205,11 +219,12 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_unpoint()\n"); #endif + return 0; } static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -228,16 +243,6 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, #endif end = from + len - 1; - - /* Is it past the end? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", - (long)end, (long)mtd->size); -#endif - return -EINVAL; - } - soff_hi = from & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); @@ -295,16 +300,6 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, #endif end = to + len - 1; - /* Is it past the end? or did the u32 wrap? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, " - "size: %ld, to: %ld)\n", (long)end, (long)mtd->size, - (long)to); -#endif - return -EINVAL; - } - soff_hi = to & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); soff_lo = to & (priv->asize - 1); @@ -358,7 +353,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, * mechanism * returns the size of the memory region found. */ -static u32 fixup_pmc551(struct pci_dev *dev) +static int fixup_pmc551(struct pci_dev *dev) { #ifdef CONFIG_MTD_PMC551_BUGFIX u32 dram_data; @@ -668,7 +663,7 @@ static int __init init_pmc551(void) struct mypriv *priv; int found = 0; struct mtd_info *mtd; - u32 length = 0; + int length = 0; if (msize) { msize = (1 << (ffs(msize) - 1)) << 20; @@ -786,11 +781,11 @@ static int __init init_pmc551(void) mtd->size = msize; mtd->flags = MTD_CAP_RAM; - mtd->erase = pmc551_erase; - mtd->read = pmc551_read; - mtd->write = pmc551_write; - mtd->point = pmc551_point; - mtd->unpoint = pmc551_unpoint; + mtd->_erase = pmc551_erase; + mtd->_read = pmc551_read; + mtd->_write = pmc551_write; + mtd->_point = pmc551_point; + mtd->_unpoint = pmc551_unpoint; mtd->type = MTD_RAM; mtd->name = "PMC551 RAM board"; mtd->erasesize = 0x10000; diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 288594163c22..8f52fc858e48 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -75,7 +75,7 @@ static slram_mtd_list_t *slram_mtdlist = NULL; static int slram_erase(struct mtd_info *, struct erase_info *); static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **, resource_size_t *); -static void slram_unpoint(struct mtd_info *, loff_t, size_t); +static int slram_unpoint(struct mtd_info *, loff_t, size_t); static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); @@ -83,21 +83,13 @@ static int slram_erase(struct mtd_info *mtd, struct erase_info *instr) { slram_priv_t *priv = mtd->priv; - if (instr->addr + instr->len > mtd->size) { - return(-EINVAL); - } - memset(priv->start + instr->addr, 0xff, instr->len); - /* This'll catch a few races. Free the thing before returning :) * I don't feel at all ashamed. This kind of thing is possible anyway * with flash, but unlikely. */ - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return(0); } @@ -106,20 +98,14 @@ static int slram_point(struct mtd_info *mtd, loff_t from, size_t len, { slram_priv_t *priv = mtd->priv; - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - - if (from + len > mtd->size) - return -EINVAL; - *virt = priv->start + from; *retlen = len; return(0); } -static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -127,14 +113,7 @@ static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, { slram_priv_t *priv = mtd->priv; - if (from > mtd->size) - return -EINVAL; - - if (from + len > mtd->size) - len = mtd->size - from; - memcpy(buf, priv->start + from, len); - *retlen = len; return(0); } @@ -144,11 +123,7 @@ static int slram_write(struct mtd_info *mtd, loff_t to, size_t len, { slram_priv_t *priv = mtd->priv; - if (to + len > mtd->size) - return -EINVAL; - memcpy(priv->start + to, buf, len); - *retlen = len; return(0); } @@ -199,11 +174,11 @@ static int register_device(char *name, unsigned long start, unsigned long length (*curmtd)->mtdinfo->name = name; (*curmtd)->mtdinfo->size = length; (*curmtd)->mtdinfo->flags = MTD_CAP_RAM; - (*curmtd)->mtdinfo->erase = slram_erase; - (*curmtd)->mtdinfo->point = slram_point; - (*curmtd)->mtdinfo->unpoint = slram_unpoint; - (*curmtd)->mtdinfo->read = slram_read; - (*curmtd)->mtdinfo->write = slram_write; + (*curmtd)->mtdinfo->_erase = slram_erase; + (*curmtd)->mtdinfo->_point = slram_point; + (*curmtd)->mtdinfo->_unpoint = slram_unpoint; + (*curmtd)->mtdinfo->_read = slram_read; + (*curmtd)->mtdinfo->_write = slram_write; (*curmtd)->mtdinfo->owner = THIS_MODULE; (*curmtd)->mtdinfo->type = MTD_RAM; (*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ; diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c new file mode 100644 index 000000000000..797d43cd3550 --- /dev/null +++ b/drivers/mtd/devices/spear_smi.c @@ -0,0 +1,1147 @@ +/* + * SMI (Serial Memory Controller) device driver for Serial NOR Flash on + * SPEAr platform + * The serial nor interface is largely based on drivers/mtd/m25p80.c, + * however the SPI interface has been replaced by SMI. + * + * Copyright © 2010 STMicroelectronics. + * Ashish Priyadarshi + * Shiraz Hashim <shiraz.hashim@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/param.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spear_smi.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/wait.h> +#include <linux/of.h> +#include <linux/of_address.h> + +/* SMI clock rate */ +#define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */ + +/* MAX time out to safely come out of a erase or write busy conditions */ +#define SMI_PROBE_TIMEOUT (HZ / 10) +#define SMI_MAX_TIME_OUT (3 * HZ) + +/* timeout for command completion */ +#define SMI_CMD_TIMEOUT (HZ / 10) + +/* registers of smi */ +#define SMI_CR1 0x0 /* SMI control register 1 */ +#define SMI_CR2 0x4 /* SMI control register 2 */ +#define SMI_SR 0x8 /* SMI status register */ +#define SMI_TR 0xC /* SMI transmit register */ +#define SMI_RR 0x10 /* SMI receive register */ + +/* defines for control_reg 1 */ +#define BANK_EN (0xF << 0) /* enables all banks */ +#define DSEL_TIME (0x6 << 4) /* Deselect time 6 + 1 SMI_CK periods */ +#define SW_MODE (0x1 << 28) /* enables SW Mode */ +#define WB_MODE (0x1 << 29) /* Write Burst Mode */ +#define FAST_MODE (0x1 << 15) /* Fast Mode */ +#define HOLD1 (0x1 << 16) /* Clock Hold period selection */ + +/* defines for control_reg 2 */ +#define SEND (0x1 << 7) /* Send data */ +#define TFIE (0x1 << 8) /* Transmission Flag Interrupt Enable */ +#define WCIE (0x1 << 9) /* Write Complete Interrupt Enable */ +#define RD_STATUS_REG (0x1 << 10) /* reads status reg */ +#define WE (0x1 << 11) /* Write Enable */ + +#define TX_LEN_SHIFT 0 +#define RX_LEN_SHIFT 4 +#define BANK_SHIFT 12 + +/* defines for status register */ +#define SR_WIP 0x1 /* Write in progress */ +#define SR_WEL 0x2 /* Write enable latch */ +#define SR_BP0 0x4 /* Block protect 0 */ +#define SR_BP1 0x8 /* Block protect 1 */ +#define SR_BP2 0x10 /* Block protect 2 */ +#define SR_SRWD 0x80 /* SR write protect */ +#define TFF 0x100 /* Transfer Finished Flag */ +#define WCF 0x200 /* Transfer Finished Flag */ +#define ERF1 0x400 /* Forbidden Write Request */ +#define ERF2 0x800 /* Forbidden Access */ + +#define WM_SHIFT 12 + +/* flash opcodes */ +#define OPCODE_RDID 0x9f /* Read JEDEC ID */ + +/* Flash Device Ids maintenance section */ + +/* data structure to maintain flash ids from different vendors */ +struct flash_device { + char *name; + u8 erase_cmd; + u32 device_id; + u32 pagesize; + unsigned long sectorsize; + unsigned long size_in_bytes; +}; + +#define FLASH_ID(n, es, id, psize, ssize, size) \ +{ \ + .name = n, \ + .erase_cmd = es, \ + .device_id = id, \ + .pagesize = psize, \ + .sectorsize = ssize, \ + .size_in_bytes = size \ +} + +static struct flash_device flash_devices[] = { + FLASH_ID("st m25p16" , 0xd8, 0x00152020, 0x100, 0x10000, 0x200000), + FLASH_ID("st m25p32" , 0xd8, 0x00162020, 0x100, 0x10000, 0x400000), + FLASH_ID("st m25p64" , 0xd8, 0x00172020, 0x100, 0x10000, 0x800000), + FLASH_ID("st m25p128" , 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000), + FLASH_ID("st m25p05" , 0xd8, 0x00102020, 0x80 , 0x8000 , 0x10000), + FLASH_ID("st m25p10" , 0xd8, 0x00112020, 0x80 , 0x8000 , 0x20000), + FLASH_ID("st m25p20" , 0xd8, 0x00122020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m25p40" , 0xd8, 0x00132020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m25p80" , 0xd8, 0x00142020, 0x100, 0x10000, 0x100000), + FLASH_ID("st m45pe10" , 0xd8, 0x00114020, 0x100, 0x10000, 0x20000), + FLASH_ID("st m45pe20" , 0xd8, 0x00124020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m45pe40" , 0xd8, 0x00134020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m45pe80" , 0xd8, 0x00144020, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl004" , 0xd8, 0x00120201, 0x100, 0x10000, 0x80000), + FLASH_ID("sp s25fl008" , 0xd8, 0x00130201, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl016" , 0xd8, 0x00140201, 0x100, 0x10000, 0x200000), + FLASH_ID("sp s25fl032" , 0xd8, 0x00150201, 0x100, 0x10000, 0x400000), + FLASH_ID("sp s25fl064" , 0xd8, 0x00160201, 0x100, 0x10000, 0x800000), + FLASH_ID("atmel 25f512" , 0x52, 0x0065001F, 0x80 , 0x8000 , 0x10000), + FLASH_ID("atmel 25f1024" , 0x52, 0x0060001F, 0x100, 0x8000 , 0x20000), + FLASH_ID("atmel 25f2048" , 0x52, 0x0063001F, 0x100, 0x10000, 0x40000), + FLASH_ID("atmel 25f4096" , 0x52, 0x0064001F, 0x100, 0x10000, 0x80000), + FLASH_ID("atmel 25fs040" , 0xd7, 0x0004661F, 0x100, 0x10000, 0x80000), + FLASH_ID("mac 25l512" , 0xd8, 0x001020C2, 0x010, 0x10000, 0x10000), + FLASH_ID("mac 25l1005" , 0xd8, 0x001120C2, 0x010, 0x10000, 0x20000), + FLASH_ID("mac 25l2005" , 0xd8, 0x001220C2, 0x010, 0x10000, 0x40000), + FLASH_ID("mac 25l4005" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l4005a" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l8005" , 0xd8, 0x001420C2, 0x010, 0x10000, 0x100000), + FLASH_ID("mac 25l1605" , 0xd8, 0x001520C2, 0x100, 0x10000, 0x200000), + FLASH_ID("mac 25l1605a" , 0xd8, 0x001520C2, 0x010, 0x10000, 0x200000), + FLASH_ID("mac 25l3205" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l3205a" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l6405" , 0xd8, 0x001720C2, 0x100, 0x10000, 0x800000), +}; + +/* Define spear specific structures */ + +struct spear_snor_flash; + +/** + * struct spear_smi - Structure for SMI Device + * + * @clk: functional clock + * @status: current status register of SMI. + * @clk_rate: functional clock rate of SMI (default: SMI_MAX_CLOCK_FREQ) + * @lock: lock to prevent parallel access of SMI. + * @io_base: base address for registers of SMI. + * @pdev: platform device + * @cmd_complete: queue to wait for command completion of NOR-flash. + * @num_flashes: number of flashes actually present on board. + * @flash: separate structure for each Serial NOR-flash attached to SMI. + */ +struct spear_smi { + struct clk *clk; + u32 status; + unsigned long clk_rate; + struct mutex lock; + void __iomem *io_base; + struct platform_device *pdev; + wait_queue_head_t cmd_complete; + u32 num_flashes; + struct spear_snor_flash *flash[MAX_NUM_FLASH_CHIP]; +}; + +/** + * struct spear_snor_flash - Structure for Serial NOR Flash + * + * @bank: Bank number(0, 1, 2, 3) for each NOR-flash. + * @dev_id: Device ID of NOR-flash. + * @lock: lock to manage flash read, write and erase operations + * @mtd: MTD info for each NOR-flash. + * @num_parts: Total number of partition in each bank of NOR-flash. + * @parts: Partition info for each bank of NOR-flash. + * @page_size: Page size of NOR-flash. + * @base_addr: Base address of NOR-flash. + * @erase_cmd: erase command may vary on different flash types + * @fast_mode: flash supports read in fast mode + */ +struct spear_snor_flash { + u32 bank; + u32 dev_id; + struct mutex lock; + struct mtd_info mtd; + u32 num_parts; + struct mtd_partition *parts; + u32 page_size; + void __iomem *base_addr; + u8 erase_cmd; + u8 fast_mode; +}; + +static inline struct spear_snor_flash *get_flash_data(struct mtd_info *mtd) +{ + return container_of(mtd, struct spear_snor_flash, mtd); +} + +/** + * spear_smi_read_sr - Read status register of flash through SMI + * @dev: structure of SMI information. + * @bank: bank to which flash is connected + * + * This routine will return the status register of the flash chip present at the + * given bank. + */ +static int spear_smi_read_sr(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 ctrlreg1; + + mutex_lock(&dev->lock); + dev->status = 0; /* Will be set in interrupt handler */ + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + /* program smi in hw mode */ + writel(ctrlreg1 & ~(SW_MODE | WB_MODE), dev->io_base + SMI_CR1); + + /* performing a rsr instruction in hw mode */ + writel((bank << BANK_SHIFT) | RD_STATUS_REG | TFIE, + dev->io_base + SMI_CR2); + + /* wait for tff */ + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + /* copy dev->status (lower 16 bits) in order to release lock */ + if (ret > 0) + ret = dev->status & 0xffff; + else + ret = -EIO; + + /* restore the ctrl regs state */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + mutex_unlock(&dev->lock); + + return ret; +} + +/** + * spear_smi_wait_till_ready - wait till flash is ready + * @dev: structure of SMI information. + * @bank: flash corresponding to this bank + * @timeout: timeout for busy wait condition + * + * This routine checks for WIP (write in progress) bit in Status register + * If successful the routine returns 0 else -EBUSY + */ +static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank, + unsigned long timeout) +{ + unsigned long finish; + int status; + + finish = jiffies + timeout; + do { + status = spear_smi_read_sr(dev, bank); + if (status < 0) + continue; /* try till timeout */ + else if (!(status & SR_WIP)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, finish)); + + dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n"); + return status; +} + +/** + * spear_smi_int_handler - SMI Interrupt Handler. + * @irq: irq number + * @dev_id: structure of SMI device, embedded in dev_id. + * + * The handler clears all interrupt conditions and records the status in + * dev->status which is used by the driver later. + */ +static irqreturn_t spear_smi_int_handler(int irq, void *dev_id) +{ + u32 status = 0; + struct spear_smi *dev = dev_id; + + status = readl(dev->io_base + SMI_SR); + + if (unlikely(!status)) + return IRQ_NONE; + + /* clear all interrupt conditions */ + writel(0, dev->io_base + SMI_SR); + + /* copy the status register in dev->status */ + dev->status |= status; + + /* send the completion */ + wake_up_interruptible(&dev->cmd_complete); + + return IRQ_HANDLED; +} + +/** + * spear_smi_hw_init - initializes the smi controller. + * @dev: structure of smi device + * + * this routine initializes the smi controller wit the default values + */ +static void spear_smi_hw_init(struct spear_smi *dev) +{ + unsigned long rate = 0; + u32 prescale = 0; + u32 val; + + rate = clk_get_rate(dev->clk); + + /* functional clock of smi */ + prescale = DIV_ROUND_UP(rate, dev->clk_rate); + + /* + * setting the standard values, fast mode, prescaler for + * SMI_MAX_CLOCK_FREQ (50MHz) operation and bank enable + */ + val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8); + + mutex_lock(&dev->lock); + writel(val, dev->io_base + SMI_CR1); + mutex_unlock(&dev->lock); +} + +/** + * get_flash_index - match chip id from a flash list. + * @flash_id: a valid nor flash chip id obtained from board. + * + * try to validate the chip id by matching from a list, if not found then simply + * returns negative. In case of success returns index in to the flash devices + * array. + */ +static int get_flash_index(u32 flash_id) +{ + int index; + + /* Matches chip-id to entire list of 'serial-nor flash' ids */ + for (index = 0; index < ARRAY_SIZE(flash_devices); index++) { + if (flash_devices[index].device_id == flash_id) + return index; + } + + /* Memory chip is not listed and not supported */ + return -ENODEV; +} + +/** + * spear_smi_write_enable - Enable the flash to do write operation + * @dev: structure of SMI device + * @bank: enable write for flash connected to this bank + * + * Set write enable latch with Write Enable command. + * Returns 0 on success. + */ +static int spear_smi_write_enable(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 ctrlreg1; + + mutex_lock(&dev->lock); + dev->status = 0; /* Will be set in interrupt handler */ + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + /* program smi in h/w mode */ + writel(ctrlreg1 & ~SW_MODE, dev->io_base + SMI_CR1); + + /* give the flash, write enable command */ + writel((bank << BANK_SHIFT) | WE | TFIE, dev->io_base + SMI_CR2); + + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + /* restore the ctrl regs state */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + + if (ret <= 0) { + ret = -EIO; + dev_err(&dev->pdev->dev, + "smi controller failed on write enable\n"); + } else { + /* check whether write mode status is set for required bank */ + if (dev->status & (1 << (bank + WM_SHIFT))) + ret = 0; + else { + dev_err(&dev->pdev->dev, "couldn't enable write\n"); + ret = -EIO; + } + } + + mutex_unlock(&dev->lock); + return ret; +} + +static inline u32 +get_sector_erase_cmd(struct spear_snor_flash *flash, u32 offset) +{ + u32 cmd; + u8 *x = (u8 *)&cmd; + + x[0] = flash->erase_cmd; + x[1] = offset >> 16; + x[2] = offset >> 8; + x[3] = offset; + + return cmd; +} + +/** + * spear_smi_erase_sector - erase one sector of flash + * @dev: structure of SMI information + * @command: erase command to be send + * @bank: bank to which this command needs to be send + * @bytes: size of command + * + * Erase one sector of flash memory at offset ``offset'' which is any + * address within the sector which should be erased. + * Returns 0 if successful, non-zero otherwise. + */ +static int spear_smi_erase_sector(struct spear_smi *dev, + u32 bank, u32 command, u32 bytes) +{ + u32 ctrlreg1 = 0; + int ret; + + ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT); + if (ret) + return ret; + + ret = spear_smi_write_enable(dev, bank); + if (ret) + return ret; + + mutex_lock(&dev->lock); + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + writel((ctrlreg1 | SW_MODE) & ~WB_MODE, dev->io_base + SMI_CR1); + + /* send command in sw mode */ + writel(command, dev->io_base + SMI_TR); + + writel((bank << BANK_SHIFT) | SEND | TFIE | (bytes << TX_LEN_SHIFT), + dev->io_base + SMI_CR2); + + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + if (ret <= 0) { + ret = -EIO; + dev_err(&dev->pdev->dev, "sector erase failed\n"); + } else + ret = 0; /* success */ + + /* restore ctrl regs */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + + mutex_unlock(&dev->lock); + return ret; +} + +/** + * spear_mtd_erase - perform flash erase operation as requested by user + * @mtd: Provides the memory characteristics + * @e_info: Provides the erase information + * + * Erase an address range on the flash chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int spear_mtd_erase(struct mtd_info *mtd, struct erase_info *e_info) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + u32 addr, command, bank; + int len, ret; + + if (!flash || !dev) + return -ENODEV; + + bank = flash->bank; + if (bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + addr = e_info->addr; + len = e_info->len; + + mutex_lock(&flash->lock); + + /* now erase sectors in loop */ + while (len) { + command = get_sector_erase_cmd(flash, addr); + /* preparing the command for flash */ + ret = spear_smi_erase_sector(dev, bank, command, 4); + if (ret) { + e_info->state = MTD_ERASE_FAILED; + mutex_unlock(&flash->lock); + return ret; + } + addr += mtd->erasesize; + len -= mtd->erasesize; + } + + mutex_unlock(&flash->lock); + e_info->state = MTD_ERASE_DONE; + mtd_erase_callback(e_info); + + return 0; +} + +/** + * spear_mtd_read - performs flash read operation as requested by the user + * @mtd: MTD information of the memory bank + * @from: Address from which to start read + * @len: Number of bytes to be read + * @retlen: Fills the Number of bytes actually read + * @buf: Fills this after reading + * + * Read an address range from the flash chip. The address range + * may be any size provided it is within the physical boundaries. + * Returns 0 on success, non zero otherwise + */ +static int spear_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u8 *buf) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + void *src; + u32 ctrlreg1, val; + int ret; + + if (!flash || !dev) + return -ENODEV; + + if (flash->bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + /* select address as per bank number */ + src = flash->base_addr + from; + + mutex_lock(&flash->lock); + + /* wait till previous write/erase is done. */ + ret = spear_smi_wait_till_ready(dev, flash->bank, SMI_MAX_TIME_OUT); + if (ret) { + mutex_unlock(&flash->lock); + return ret; + } + + mutex_lock(&dev->lock); + /* put smi in hw mode not wbt mode */ + ctrlreg1 = val = readl(dev->io_base + SMI_CR1); + val &= ~(SW_MODE | WB_MODE); + if (flash->fast_mode) + val |= FAST_MODE; + + writel(val, dev->io_base + SMI_CR1); + + memcpy_fromio(buf, (u8 *)src, len); + + /* restore ctrl reg1 */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + mutex_unlock(&dev->lock); + + *retlen = len; + mutex_unlock(&flash->lock); + + return 0; +} + +static inline int spear_smi_cpy_toio(struct spear_smi *dev, u32 bank, + void *dest, const void *src, size_t len) +{ + int ret; + u32 ctrlreg1; + + /* wait until finished previous write command. */ + ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT); + if (ret) + return ret; + + /* put smi in write enable */ + ret = spear_smi_write_enable(dev, bank); + if (ret) + return ret; + + /* put smi in hw, write burst mode */ + mutex_lock(&dev->lock); + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + writel((ctrlreg1 | WB_MODE) & ~SW_MODE, dev->io_base + SMI_CR1); + + memcpy_toio(dest, src, len); + + writel(ctrlreg1, dev->io_base + SMI_CR1); + + mutex_unlock(&dev->lock); + return 0; +} + +/** + * spear_mtd_write - performs write operation as requested by the user. + * @mtd: MTD information of the memory bank. + * @to: Address to write. + * @len: Number of bytes to be written. + * @retlen: Number of bytes actually wrote. + * @buf: Buffer from which the data to be taken. + * + * Write an address range to the flash chip. Data must be written in + * flash_page_size chunks. The address range may be any size provided + * it is within the physical boundaries. + * Returns 0 on success, non zero otherwise + */ +static int spear_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u8 *buf) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + void *dest; + u32 page_offset, page_size; + int ret; + + if (!flash || !dev) + return -ENODEV; + + if (flash->bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + /* select address as per bank number */ + dest = flash->base_addr + to; + mutex_lock(&flash->lock); + + page_offset = (u32)to % flash->page_size; + + /* do if all the bytes fit onto one page */ + if (page_offset + len <= flash->page_size) { + ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, len); + if (!ret) + *retlen += len; + } else { + u32 i; + + /* the size of data remaining on the first page */ + page_size = flash->page_size - page_offset; + + ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, + page_size); + if (ret) + goto err_write; + else + *retlen += page_size; + + /* write everything in pagesize chunks */ + for (i = page_size; i < len; i += page_size) { + page_size = len - i; + if (page_size > flash->page_size) + page_size = flash->page_size; + + ret = spear_smi_cpy_toio(dev, flash->bank, dest + i, + buf + i, page_size); + if (ret) + break; + else + *retlen += page_size; + } + } + +err_write: + mutex_unlock(&flash->lock); + + return ret; +} + +/** + * spear_smi_probe_flash - Detects the NOR Flash chip. + * @dev: structure of SMI information. + * @bank: bank on which flash must be probed + * + * This routine will check whether there exists a flash chip on a given memory + * bank ID. + * Return index of the probed flash in flash devices structure + */ +static int spear_smi_probe_flash(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 val = 0; + + ret = spear_smi_wait_till_ready(dev, bank, SMI_PROBE_TIMEOUT); + if (ret) + return ret; + + mutex_lock(&dev->lock); + + dev->status = 0; /* Will be set in interrupt handler */ + /* put smi in sw mode */ + val = readl(dev->io_base + SMI_CR1); + writel(val | SW_MODE, dev->io_base + SMI_CR1); + + /* send readid command in sw mode */ + writel(OPCODE_RDID, dev->io_base + SMI_TR); + + val = (bank << BANK_SHIFT) | SEND | (1 << TX_LEN_SHIFT) | + (3 << RX_LEN_SHIFT) | TFIE; + writel(val, dev->io_base + SMI_CR2); + + /* wait for TFF */ + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + if (ret <= 0) { + ret = -ENODEV; + goto err_probe; + } + + /* get memory chip id */ + val = readl(dev->io_base + SMI_RR); + val &= 0x00ffffff; + ret = get_flash_index(val); + +err_probe: + /* clear sw mode */ + val = readl(dev->io_base + SMI_CR1); + writel(val & ~SW_MODE, dev->io_base + SMI_CR1); + + mutex_unlock(&dev->lock); + return ret; +} + + +#ifdef CONFIG_OF +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *pp = NULL; + const __be32 *addr; + u32 val; + int len; + int i = 0; + + if (!np) + return -ENODEV; + + of_property_read_u32(np, "clock-rate", &val); + pdata->clk_rate = val; + + pdata->board_flash_info = devm_kzalloc(&pdev->dev, + sizeof(*pdata->board_flash_info), + GFP_KERNEL); + + /* Fill structs for each subnode (flash device) */ + while ((pp = of_get_next_child(np, pp))) { + struct spear_smi_flash_info *flash_info; + + flash_info = &pdata->board_flash_info[i]; + pdata->np[i] = pp; + + /* Read base-addr and size from DT */ + addr = of_get_property(pp, "reg", &len); + pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]); + pdata->board_flash_info->size = be32_to_cpup(&addr[1]); + + if (of_get_property(pp, "st,smi-fast-mode", NULL)) + pdata->board_flash_info->fast_mode = 1; + + i++; + } + + pdata->num_flashes = i; + + return 0; +} +#else +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + return -ENOSYS; +} +#endif + +static int spear_smi_setup_banks(struct platform_device *pdev, + u32 bank, struct device_node *np) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + struct mtd_part_parser_data ppdata = {}; + struct spear_smi_flash_info *flash_info; + struct spear_smi_plat_data *pdata; + struct spear_snor_flash *flash; + struct mtd_partition *parts = NULL; + int count = 0; + int flash_index; + int ret = 0; + + pdata = dev_get_platdata(&pdev->dev); + if (bank > pdata->num_flashes - 1) + return -EINVAL; + + flash_info = &pdata->board_flash_info[bank]; + if (!flash_info) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_ATOMIC); + if (!flash) + return -ENOMEM; + flash->bank = bank; + flash->fast_mode = flash_info->fast_mode ? 1 : 0; + mutex_init(&flash->lock); + + /* verify whether nor flash is really present on board */ + flash_index = spear_smi_probe_flash(dev, bank); + if (flash_index < 0) { + dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank); + ret = flash_index; + goto err_probe; + } + /* map the memory for nor flash chip */ + flash->base_addr = ioremap(flash_info->mem_base, flash_info->size); + if (!flash->base_addr) { + ret = -EIO; + goto err_probe; + } + + dev->flash[bank] = flash; + flash->mtd.priv = dev; + + if (flash_info->name) + flash->mtd.name = flash_info->name; + else + flash->mtd.name = flash_devices[flash_index].name; + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.writesize = 1; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.size = flash_info->size; + flash->mtd.erasesize = flash_devices[flash_index].sectorsize; + flash->page_size = flash_devices[flash_index].pagesize; + flash->mtd.writebufsize = flash->page_size; + flash->erase_cmd = flash_devices[flash_index].erase_cmd; + flash->mtd._erase = spear_mtd_erase; + flash->mtd._read = spear_mtd_read; + flash->mtd._write = spear_mtd_write; + flash->dev_id = flash_devices[flash_index].device_id; + + dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n", + flash->mtd.name, flash->mtd.size, + flash->mtd.size / (1024 * 1024)); + + dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n", + flash->mtd.erasesize, flash->mtd.erasesize / 1024); + +#ifndef CONFIG_OF + if (flash_info->partitions) { + parts = flash_info->partitions; + count = flash_info->nr_partitions; + } +#endif + ppdata.of_node = np; + + ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts, + count); + if (ret) { + dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret); + goto err_map; + } + + return 0; + +err_map: + iounmap(flash->base_addr); + +err_probe: + kfree(flash); + return ret; +} + +/** + * spear_smi_probe - Entry routine + * @pdev: platform device structure + * + * This is the first routine which gets invoked during booting and does all + * initialization/allocation work. The routine looks for available memory banks, + * and do proper init for any found one. + * Returns 0 on success, non zero otherwise + */ +static int __devinit spear_smi_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct spear_smi_plat_data *pdata = NULL; + struct spear_smi *dev; + struct resource *smi_base; + int irq, ret = 0; + int i; + + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: ERROR: no memory", __func__); + ret = -ENOMEM; + goto err; + } + pdev->dev.platform_data = pdata; + ret = spear_smi_probe_config_dt(pdev, np); + if (ret) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + } else { + pdata = dev_get_platdata(&pdev->dev); + if (pdata < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + } + + smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!smi_base) { + ret = -ENODEV; + dev_err(&pdev->dev, "invalid smi base address\n"); + goto err; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "invalid smi irq\n"); + goto err; + } + + dev = kzalloc(sizeof(*dev), GFP_ATOMIC); + if (!dev) { + ret = -ENOMEM; + dev_err(&pdev->dev, "mem alloc fail\n"); + goto err; + } + + smi_base = request_mem_region(smi_base->start, resource_size(smi_base), + pdev->name); + if (!smi_base) { + ret = -EBUSY; + dev_err(&pdev->dev, "request mem region fail\n"); + goto err_mem; + } + + dev->io_base = ioremap(smi_base->start, resource_size(smi_base)); + if (!dev->io_base) { + ret = -EIO; + dev_err(&pdev->dev, "ioremap fail\n"); + goto err_ioremap; + } + + dev->pdev = pdev; + dev->clk_rate = pdata->clk_rate; + + if (dev->clk_rate < 0 || dev->clk_rate > SMI_MAX_CLOCK_FREQ) + dev->clk_rate = SMI_MAX_CLOCK_FREQ; + + dev->num_flashes = pdata->num_flashes; + + if (dev->num_flashes > MAX_NUM_FLASH_CHIP) { + dev_err(&pdev->dev, "exceeding max number of flashes\n"); + dev->num_flashes = MAX_NUM_FLASH_CHIP; + } + + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) { + ret = PTR_ERR(dev->clk); + goto err_clk; + } + + ret = clk_enable(dev->clk); + if (ret) + goto err_clk_enable; + + ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev); + if (ret) { + dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n"); + goto err_irq; + } + + mutex_init(&dev->lock); + init_waitqueue_head(&dev->cmd_complete); + spear_smi_hw_init(dev); + platform_set_drvdata(pdev, dev); + + /* loop for each serial nor-flash which is connected to smi */ + for (i = 0; i < dev->num_flashes; i++) { + ret = spear_smi_setup_banks(pdev, i, pdata->np[i]); + if (ret) { + dev_err(&dev->pdev->dev, "bank setup failed\n"); + goto err_bank_setup; + } + } + + return 0; + +err_bank_setup: + free_irq(irq, dev); + platform_set_drvdata(pdev, NULL); +err_irq: + clk_disable(dev->clk); +err_clk_enable: + clk_put(dev->clk); +err_clk: + iounmap(dev->io_base); +err_ioremap: + release_mem_region(smi_base->start, resource_size(smi_base)); +err_mem: + kfree(dev); +err: + return ret; +} + +/** + * spear_smi_remove - Exit routine + * @pdev: platform device structure + * + * free all allocations and delete the partitions. + */ +static int __devexit spear_smi_remove(struct platform_device *pdev) +{ + struct spear_smi *dev; + struct spear_smi_plat_data *pdata; + struct spear_snor_flash *flash; + struct resource *smi_base; + int ret; + int i, irq; + + dev = platform_get_drvdata(pdev); + if (!dev) { + dev_err(&pdev->dev, "dev is null\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + + /* clean up for all nor flash */ + for (i = 0; i < dev->num_flashes; i++) { + flash = dev->flash[i]; + if (!flash) + continue; + + /* clean up mtd stuff */ + ret = mtd_device_unregister(&flash->mtd); + if (ret) + dev_err(&pdev->dev, "error removing mtd\n"); + + iounmap(flash->base_addr); + kfree(flash); + } + + irq = platform_get_irq(pdev, 0); + free_irq(irq, dev); + + clk_disable(dev->clk); + clk_put(dev->clk); + iounmap(dev->io_base); + kfree(dev); + + smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(smi_base->start, resource_size(smi_base)); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +int spear_smi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + + if (dev && dev->clk) + clk_disable(dev->clk); + + return 0; +} + +int spear_smi_resume(struct platform_device *pdev) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + int ret = -EPERM; + + if (dev && dev->clk) + ret = clk_enable(dev->clk); + + if (!ret) + spear_smi_hw_init(dev); + return ret; +} + +#ifdef CONFIG_OF +static const struct of_device_id spear_smi_id_table[] = { + { .compatible = "st,spear600-smi" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_smi_id_table); +#endif + +static struct platform_driver spear_smi_driver = { + .driver = { + .name = "smi", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear_smi_id_table), + }, + .probe = spear_smi_probe, + .remove = __devexit_p(spear_smi_remove), + .suspend = spear_smi_suspend, + .resume = spear_smi_resume, +}; + +static int spear_smi_init(void) +{ + return platform_driver_register(&spear_smi_driver); +} +module_init(spear_smi_init); + +static void spear_smi_exit(void) +{ + platform_driver_unregister(&spear_smi_driver); +} +module_exit(spear_smi_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>"); +MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips"); diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index 5fc198350b94..ab8a2f4c8d60 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -175,9 +175,6 @@ static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) int err; /* Sanity checks */ - if (instr->addr + instr->len > flash->mtd.size) - return -EINVAL; - if ((uint32_t)instr->len % mtd->erasesize) return -EINVAL; @@ -223,16 +220,6 @@ static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, unsigned char command[4]; int ret; - /* Sanity checking */ - if (len == 0) - return 0; - - if (from + len > flash->mtd.size) - return -EINVAL; - - if (retlen) - *retlen = 0; - spi_message_init(&message); memset(&transfer, 0, sizeof(transfer)); @@ -274,13 +261,6 @@ static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, int i, j, ret, bytes, copied = 0; unsigned char command[5]; - /* Sanity checks */ - if (!len) - return 0; - - if (to + len > flash->mtd.size) - return -EINVAL; - if ((uint32_t)to % mtd->writesize) return -EINVAL; @@ -402,10 +382,11 @@ static int __devinit sst25l_probe(struct spi_device *spi) flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.erasesize = flash_info->erase_size; flash->mtd.writesize = flash_info->page_size; + flash->mtd.writebufsize = flash_info->page_size; flash->mtd.size = flash_info->page_size * flash_info->nr_pages; - flash->mtd.erase = sst25l_erase; - flash->mtd.read = sst25l_read; - flash->mtd.write = sst25l_write; + flash->mtd._erase = sst25l_erase; + flash->mtd._read = sst25l_read; + flash->mtd._write = sst25l_write; dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, (long long)flash->mtd.size >> 10); @@ -418,9 +399,9 @@ static int __devinit sst25l_probe(struct spi_device *spi) flash->mtd.numeraseregions); - ret = mtd_device_parse_register(&flash->mtd, NULL, 0, - data ? data->parts : NULL, - data ? data->nr_parts : 0); + ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, + data ? data->parts : NULL, + data ? data->nr_parts : 0); if (ret) { kfree(flash); dev_set_drvdata(&spi->dev, NULL); @@ -450,18 +431,7 @@ static struct spi_driver sst25l_driver = { .remove = __devexit_p(sst25l_remove), }; -static int __init sst25l_init(void) -{ - return spi_register_driver(&sst25l_driver); -} - -static void __exit sst25l_exit(void) -{ - spi_unregister_driver(&sst25l_driver); -} - -module_init(sst25l_init); -module_exit(sst25l_exit); +module_spi_driver(sst25l_driver); MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, " diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 28646c95cfb8..3af351484098 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -56,7 +56,7 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) if (memcmp(mtd->name, "DiskOnChip", 10)) return; - if (!mtd->block_isbad) { + if (!mtd->_block_isbad) { printk(KERN_ERR "INFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n" "Please use the new diskonchip driver under the NAND subsystem.\n"); diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index 536bbceaeaad..d3cfe26beeaa 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -40,7 +40,7 @@ static int lpddr_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); static int lpddr_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len, size_t *retlen, void **mtdbuf, resource_size_t *phys); -static void lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len); +static int lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len); static int get_chip(struct map_info *map, struct flchip *chip, int mode); static int chip_ready(struct map_info *map, struct flchip *chip, int mode); static void put_chip(struct map_info *map, struct flchip *chip); @@ -63,18 +63,18 @@ struct mtd_info *lpddr_cmdset(struct map_info *map) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->read = lpddr_read; + mtd->_read = lpddr_read; mtd->type = MTD_NORFLASH; mtd->flags = MTD_CAP_NORFLASH; mtd->flags &= ~MTD_BIT_WRITEABLE; - mtd->erase = lpddr_erase; - mtd->write = lpddr_write_buffers; - mtd->writev = lpddr_writev; - mtd->lock = lpddr_lock; - mtd->unlock = lpddr_unlock; + mtd->_erase = lpddr_erase; + mtd->_write = lpddr_write_buffers; + mtd->_writev = lpddr_writev; + mtd->_lock = lpddr_lock; + mtd->_unlock = lpddr_unlock; if (map_is_linear(map)) { - mtd->point = lpddr_point; - mtd->unpoint = lpddr_unpoint; + mtd->_point = lpddr_point; + mtd->_unpoint = lpddr_unpoint; } mtd->size = 1 << lpddr->qinfo->DevSizeShift; mtd->erasesize = 1 << lpddr->qinfo->UniformBlockSizeShift; @@ -530,14 +530,12 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len, struct flchip *chip = &lpddr->chips[chipnum]; int ret = 0; - if (!map->virt || (adr + len > mtd->size)) + if (!map->virt) return -EINVAL; /* ofs: offset within the first chip that the first read should start */ ofs = adr - (chipnum << lpddr->chipshift); - *mtdbuf = (void *)map->virt + chip->start + ofs; - *retlen = 0; while (len) { unsigned long thislen; @@ -575,11 +573,11 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len, return 0; } -static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) +static int lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) { struct map_info *map = mtd->priv; struct lpddr_private *lpddr = map->fldrv_priv; - int chipnum = adr >> lpddr->chipshift; + int chipnum = adr >> lpddr->chipshift, err = 0; unsigned long ofs; /* ofs: offset within the first chip that the first read should start */ @@ -603,9 +601,11 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) chip->ref_point_counter--; if (chip->ref_point_counter == 0) chip->state = FL_READY; - } else + } else { printk(KERN_WARNING "%s: Warning: unpoint called on non" "pointed region\n", map->name); + err = -EINVAL; + } put_chip(map, chip); mutex_unlock(&chip->mutex); @@ -614,6 +614,8 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) ofs = 0; chipnum++; } + + return err; } static int lpddr_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, @@ -637,13 +639,11 @@ static int lpddr_writev(struct mtd_info *mtd, const struct kvec *vecs, int chipnum; unsigned long ofs, vec_seek, i; int wbufsize = 1 << lpddr->qinfo->BufSizeShift; - size_t len = 0; for (i = 0; i < count; i++) len += vecs[i].iov_len; - *retlen = 0; if (!len) return 0; @@ -688,9 +688,6 @@ static int lpddr_erase(struct mtd_info *mtd, struct erase_info *instr) ofs = instr->addr; len = instr->len; - if (ofs > mtd->size || (len + ofs) > mtd->size) - return -EINVAL; - while (len > 0) { ret = do_erase_oneblock(mtd, ofs); if (ret) diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 650126c361f1..ef5cde84a8b3 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -164,8 +164,8 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev) return -ENXIO; } - mtd_device_parse_register(state->mtd, part_probe_types, 0, - pdata->parts, pdata->nr_parts); + mtd_device_parse_register(state->mtd, part_probe_types, NULL, + pdata->parts, pdata->nr_parts); platform_set_drvdata(pdev, state); diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c index f43b365b848c..080f06053bd4 100644 --- a/drivers/mtd/maps/dc21285.c +++ b/drivers/mtd/maps/dc21285.c @@ -196,7 +196,7 @@ static int __init init_dc21285(void) dc21285_mtd->owner = THIS_MODULE; - mtd_device_parse_register(dc21285_mtd, probes, 0, NULL, 0); + mtd_device_parse_register(dc21285_mtd, probes, NULL, NULL, 0); if(machine_is_ebsa285()) { /* diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c index 33cce895859f..e4de96ba52b3 100644 --- a/drivers/mtd/maps/gpio-addr-flash.c +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -252,8 +252,8 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev) } - mtd_device_parse_register(state->mtd, part_probe_types, 0, - pdata->parts, pdata->nr_parts); + mtd_device_parse_register(state->mtd, part_probe_types, NULL, + pdata->parts, pdata->nr_parts); return 0; } diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c index 49c14187fc66..8ed6cb4529d8 100644 --- a/drivers/mtd/maps/h720x-flash.c +++ b/drivers/mtd/maps/h720x-flash.c @@ -85,8 +85,8 @@ static int __init h720x_mtd_init(void) if (mymtd) { mymtd->owner = THIS_MODULE; - mtd_device_parse_register(mymtd, NULL, 0, - h720x_partitions, NUM_PARTITIONS); + mtd_device_parse_register(mymtd, NULL, NULL, + h720x_partitions, NUM_PARTITIONS); return 0; } diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c index f47aedb24366..834a06c56f56 100644 --- a/drivers/mtd/maps/impa7.c +++ b/drivers/mtd/maps/impa7.c @@ -91,7 +91,7 @@ static int __init init_impa7(void) if (impa7_mtd[i]) { impa7_mtd[i]->owner = THIS_MODULE; devicesfound++; - mtd_device_parse_register(impa7_mtd[i], NULL, 0, + mtd_device_parse_register(impa7_mtd[i], NULL, NULL, partitions, ARRAY_SIZE(partitions)); } diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c index 08c239604ee4..92e1f41634c7 100644 --- a/drivers/mtd/maps/intel_vr_nor.c +++ b/drivers/mtd/maps/intel_vr_nor.c @@ -72,7 +72,7 @@ static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p) { /* register the flash bank */ /* partition the flash bank */ - return mtd_device_parse_register(p->info, NULL, 0, NULL, 0); + return mtd_device_parse_register(p->info, NULL, NULL, NULL, 0); } static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p) diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index fc7d4d0d9a4e..4a41ced0f710 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -226,7 +226,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) } info->mtd->owner = THIS_MODULE; - err = mtd_device_parse_register(info->mtd, probes, 0, NULL, 0); + err = mtd_device_parse_register(info->mtd, probes, NULL, NULL, 0); if (err) goto Error; diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 8b5410162d70..e864fc6c58f9 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -182,6 +182,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev) { struct flash_platform_data *plat = dev->dev.platform_data; struct ixp4xx_flash_info *info; + struct mtd_part_parser_data ppdata = { + .origin = dev->resource->start, + }; int err = -1; if (!plat) @@ -247,7 +250,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev) /* Use the fast version */ info->map.write = ixp4xx_write16; - err = mtd_device_parse_register(info->mtd, probes, dev->resource->start, + err = mtd_device_parse_register(info->mtd, probes, &ppdata, plat->parts, plat->nr_parts); if (err) { printk(KERN_ERR "Could not parse partitions\n"); diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c index dd0360ba2412..74bd98ee635f 100644 --- a/drivers/mtd/maps/l440gx.c +++ b/drivers/mtd/maps/l440gx.c @@ -27,17 +27,21 @@ static struct mtd_info *mymtd; /* Is this really the vpp port? */ +static DEFINE_SPINLOCK(l440gx_vpp_lock); +static int l440gx_vpp_refcnt; static void l440gx_set_vpp(struct map_info *map, int vpp) { - unsigned long l; + unsigned long flags; - l = inl(VPP_PORT); + spin_lock_irqsave(&l440gx_vpp_lock, flags); if (vpp) { - l |= 1; + if (++l440gx_vpp_refcnt == 1) /* first nested 'on' */ + outl(inl(VPP_PORT) | 1, VPP_PORT); } else { - l &= ~1; + if (--l440gx_vpp_refcnt == 0) /* last nested 'off' */ + outl(inl(VPP_PORT) & ~1, VPP_PORT); } - outl(l, VPP_PORT); + spin_unlock_irqrestore(&l440gx_vpp_lock, flags); } static struct map_info l440gx_map = { diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c index 7b889de9477b..b5401e355745 100644 --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c @@ -45,6 +45,7 @@ struct ltq_mtd { }; static char ltq_map_name[] = "ltq_nor"; +static const char *ltq_probe_types[] __devinitconst = { "cmdlinepart", NULL }; static map_word ltq_read16(struct map_info *map, unsigned long adr) @@ -168,8 +169,9 @@ ltq_mtd_probe(struct platform_device *pdev) cfi->addr_unlock1 ^= 1; cfi->addr_unlock2 ^= 1; - err = mtd_device_parse_register(ltq_mtd->mtd, NULL, 0, - ltq_mtd_data->parts, ltq_mtd_data->nr_parts); + err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types, NULL, + ltq_mtd_data->parts, + ltq_mtd_data->nr_parts); if (err) { dev_err(&pdev->dev, "failed to add partitions\n"); goto err_destroy; diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c index 8fed58e3a4a8..3c7ad17fca78 100644 --- a/drivers/mtd/maps/latch-addr-flash.c +++ b/drivers/mtd/maps/latch-addr-flash.c @@ -199,8 +199,9 @@ static int __devinit latch_addr_flash_probe(struct platform_device *dev) } info->mtd->owner = THIS_MODULE; - mtd_device_parse_register(info->mtd, NULL, 0, - latch_addr_data->parts, latch_addr_data->nr_parts); + mtd_device_parse_register(info->mtd, NULL, NULL, + latch_addr_data->parts, + latch_addr_data->nr_parts); return 0; iounmap: diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 0259cf583022..a3cfad392ed6 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -294,13 +294,24 @@ static void pcmcia_copy_to(struct map_info *map, unsigned long to, const void *f } +static DEFINE_SPINLOCK(pcmcia_vpp_lock); +static int pcmcia_vpp_refcnt; static void pcmciamtd_set_vpp(struct map_info *map, int on) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; struct pcmcia_device *link = dev->p_dev; + unsigned long flags; pr_debug("dev = %p on = %d vpp = %d\n\n", dev, on, dev->vpp); - pcmcia_fixup_vpp(link, on ? dev->vpp : 0); + spin_lock_irqsave(&pcmcia_vpp_lock, flags); + if (on) { + if (++pcmcia_vpp_refcnt == 1) /* first nested 'on' */ + pcmcia_fixup_vpp(link, dev->vpp); + } else { + if (--pcmcia_vpp_refcnt == 0) /* last nested 'off' */ + pcmcia_fixup_vpp(link, 0); + } + spin_unlock_irqrestore(&pcmcia_vpp_lock, flags); } diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index abc562653b31..21b0b713cacb 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -27,6 +27,8 @@ struct physmap_flash_info { struct mtd_info *mtd[MAX_RESOURCES]; struct mtd_info *cmtd; struct map_info map[MAX_RESOURCES]; + spinlock_t vpp_lock; + int vpp_refcnt; }; static int physmap_flash_remove(struct platform_device *dev) @@ -63,12 +65,26 @@ static void physmap_set_vpp(struct map_info *map, int state) { struct platform_device *pdev; struct physmap_flash_data *physmap_data; + struct physmap_flash_info *info; + unsigned long flags; pdev = (struct platform_device *)map->map_priv_1; physmap_data = pdev->dev.platform_data; - if (physmap_data->set_vpp) - physmap_data->set_vpp(pdev, state); + if (!physmap_data->set_vpp) + return; + + info = platform_get_drvdata(pdev); + + spin_lock_irqsave(&info->vpp_lock, flags); + if (state) { + if (++info->vpp_refcnt == 1) /* first nested 'on' */ + physmap_data->set_vpp(pdev, 1); + } else { + if (--info->vpp_refcnt == 0) /* last nested 'off' */ + physmap_data->set_vpp(pdev, 0); + } + spin_unlock_irqrestore(&info->vpp_lock, flags); } static const char *rom_probe_types[] = { @@ -172,9 +188,11 @@ static int physmap_flash_probe(struct platform_device *dev) if (err) goto err_out; + spin_lock_init(&info->vpp_lock); + part_types = physmap_data->part_probe_types ? : part_probe_types; - mtd_device_parse_register(info->cmtd, part_types, 0, + mtd_device_parse_register(info->cmtd, part_types, NULL, physmap_data->parts, physmap_data->nr_parts); return 0; diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 45876d0e5b8e..891558de3ec1 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -222,8 +222,9 @@ static int platram_probe(struct platform_device *pdev) /* check to see if there are any available partitions, or wether * to add this device whole */ - err = mtd_device_parse_register(info->mtd, pdata->probes, 0, - pdata->partitions, pdata->nr_partitions); + err = mtd_device_parse_register(info->mtd, pdata->probes, NULL, + pdata->partitions, + pdata->nr_partitions); if (!err) dev_info(&pdev->dev, "registered mtd device\n"); diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 436d121185b1..81884c277405 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -98,7 +98,8 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev) } info->mtd->owner = THIS_MODULE; - mtd_device_parse_register(info->mtd, probes, 0, flash->parts, flash->nr_parts); + mtd_device_parse_register(info->mtd, probes, NULL, flash->parts, + flash->nr_parts); platform_set_drvdata(pdev, info); return 0; diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c index 3da63fc6f16e..6f52e1f288b6 100644 --- a/drivers/mtd/maps/rbtx4939-flash.c +++ b/drivers/mtd/maps/rbtx4939-flash.c @@ -102,8 +102,8 @@ static int rbtx4939_flash_probe(struct platform_device *dev) info->mtd->owner = THIS_MODULE; if (err) goto err_out; - err = mtd_device_parse_register(info->mtd, NULL, 0, - pdata->parts, pdata->nr_parts); + err = mtd_device_parse_register(info->mtd, NULL, NULL, pdata->parts, + pdata->nr_parts); if (err) goto err_out; diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index cbc3b7867910..a675bdbcb0fe 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -36,10 +36,22 @@ struct sa_info { struct sa_subdev_info subdev[0]; }; +static DEFINE_SPINLOCK(sa1100_vpp_lock); +static int sa1100_vpp_refcnt; static void sa1100_set_vpp(struct map_info *map, int on) { struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map); - subdev->plat->set_vpp(on); + unsigned long flags; + + spin_lock_irqsave(&sa1100_vpp_lock, flags); + if (on) { + if (++sa1100_vpp_refcnt == 1) /* first nested 'on' */ + subdev->plat->set_vpp(1); + } else { + if (--sa1100_vpp_refcnt == 0) /* last nested 'off' */ + subdev->plat->set_vpp(0); + } + spin_unlock_irqrestore(&sa1100_vpp_lock, flags); } static void sa1100_destroy_subdev(struct sa_subdev_info *subdev) @@ -252,8 +264,8 @@ static int __devinit sa1100_mtd_probe(struct platform_device *pdev) /* * Partition selection stuff. */ - mtd_device_parse_register(info->mtd, part_probes, 0, - plat->parts, plat->nr_parts); + mtd_device_parse_register(info->mtd, part_probes, NULL, plat->parts, + plat->nr_parts); platform_set_drvdata(pdev, info); err = 0; diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c index 496c40704aff..9d900ada6708 100644 --- a/drivers/mtd/maps/solutionengine.c +++ b/drivers/mtd/maps/solutionengine.c @@ -92,8 +92,8 @@ static int __init init_soleng_maps(void) mtd_device_register(eprom_mtd, NULL, 0); } - mtd_device_parse_register(flash_mtd, probes, 0, - superh_se_partitions, NUM_PARTITIONS); + mtd_device_parse_register(flash_mtd, probes, NULL, + superh_se_partitions, NUM_PARTITIONS); return 0; } diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 6793074f3f40..cfff454f628b 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -85,7 +85,7 @@ static int __init uclinux_mtd_init(void) } mtd->owner = THIS_MODULE; - mtd->point = uclinux_point; + mtd->_point = uclinux_point; mtd->priv = mapp; uclinux_ram_mtdinfo = mtd; diff --git a/drivers/mtd/maps/vmu-flash.c b/drivers/mtd/maps/vmu-flash.c index 3a04b078576a..2e2b0945edc7 100644 --- a/drivers/mtd/maps/vmu-flash.c +++ b/drivers/mtd/maps/vmu-flash.c @@ -360,9 +360,6 @@ static int vmu_flash_read(struct mtd_info *mtd, loff_t from, size_t len, int index = 0, retval, partition, leftover, numblocks; unsigned char cx; - if (len < 1) - return -EIO; - mpart = mtd->priv; mdev = mpart->mdev; partition = mpart->partition; @@ -434,11 +431,6 @@ static int vmu_flash_write(struct mtd_info *mtd, loff_t to, size_t len, partition = mpart->partition; card = maple_get_drvdata(mdev); - /* simple sanity checks */ - if (len < 1) { - error = -EIO; - goto failed; - } numblocks = card->parts[partition].numblocks; if (to + len > numblocks * card->blocklen) len = numblocks * card->blocklen - to; @@ -544,9 +536,9 @@ static void vmu_queryblocks(struct mapleq *mq) mtd_cur->flags = MTD_WRITEABLE|MTD_NO_ERASE; mtd_cur->size = part_cur->numblocks * card->blocklen; mtd_cur->erasesize = card->blocklen; - mtd_cur->write = vmu_flash_write; - mtd_cur->read = vmu_flash_read; - mtd_cur->sync = vmu_flash_sync; + mtd_cur->_write = vmu_flash_write; + mtd_cur->_read = vmu_flash_read; + mtd_cur->_sync = vmu_flash_sync; mtd_cur->writesize = card->blocklen; mpart = kmalloc(sizeof(struct mdev_part), GFP_KERNEL); diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c index aa7e0cb2893c..71b0ba797912 100644 --- a/drivers/mtd/maps/wr_sbc82xx_flash.c +++ b/drivers/mtd/maps/wr_sbc82xx_flash.c @@ -142,7 +142,7 @@ static int __init init_sbc82xx_flash(void) nr_parts = ARRAY_SIZE(smallflash_parts); } - mtd_device_parse_register(sbcmtd[i], part_probes, 0, + mtd_device_parse_register(sbcmtd[i], part_probes, NULL, defparts, nr_parts); } return 0; diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 424ca5f93c6c..f1f06715d4e0 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -233,6 +233,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode) ret = __get_mtd_device(dev->mtd); if (ret) goto error_release; + dev->file_mode = mode; unlock: dev->open++; diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index af6591237b9b..6c6d80736fad 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -321,8 +321,12 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd) mutex_unlock(&mtdblk->cache_mutex); if (!--mtdblk->count) { - /* It was the last usage. Free the cache */ - mtd_sync(mbd->mtd); + /* + * It was the last usage. Free the cache, but only sync if + * opened for writing. + */ + if (mbd->file_mode & FMODE_WRITE) + mtd_sync(mbd->mtd); vfree(mtdblk->cache_data); } diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index c57ae92ebda4..58fc65f5c817 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -39,7 +39,6 @@ #include <asm/uaccess.h> static DEFINE_MUTEX(mtd_mutex); -static struct vfsmount *mtd_inode_mnt __read_mostly; /* * Data structure to hold the pointer to the mtd device as well @@ -75,7 +74,9 @@ static loff_t mtdchar_lseek(struct file *file, loff_t offset, int orig) return -EINVAL; } - +static int count; +static struct vfsmount *mnt; +static struct file_system_type mtd_inodefs_type; static int mtdchar_open(struct inode *inode, struct file *file) { @@ -92,6 +93,10 @@ static int mtdchar_open(struct inode *inode, struct file *file) if ((file->f_mode & FMODE_WRITE) && (minor & 1)) return -EACCES; + ret = simple_pin_fs(&mtd_inodefs_type, &mnt, &count); + if (ret) + return ret; + mutex_lock(&mtd_mutex); mtd = get_mtd_device(NULL, devnum); @@ -101,16 +106,14 @@ static int mtdchar_open(struct inode *inode, struct file *file) } if (mtd->type == MTD_ABSENT) { - put_mtd_device(mtd); ret = -ENODEV; - goto out; + goto out1; } - mtd_ino = iget_locked(mtd_inode_mnt->mnt_sb, devnum); + mtd_ino = iget_locked(mnt->mnt_sb, devnum); if (!mtd_ino) { - put_mtd_device(mtd); ret = -ENOMEM; - goto out; + goto out1; } if (mtd_ino->i_state & I_NEW) { mtd_ino->i_private = mtd; @@ -122,25 +125,28 @@ static int mtdchar_open(struct inode *inode, struct file *file) /* You can't open it RW if it's not a writeable device */ if ((file->f_mode & FMODE_WRITE) && !(mtd->flags & MTD_WRITEABLE)) { - iput(mtd_ino); - put_mtd_device(mtd); ret = -EACCES; - goto out; + goto out2; } mfi = kzalloc(sizeof(*mfi), GFP_KERNEL); if (!mfi) { - iput(mtd_ino); - put_mtd_device(mtd); ret = -ENOMEM; - goto out; + goto out2; } mfi->ino = mtd_ino; mfi->mtd = mtd; file->private_data = mfi; + mutex_unlock(&mtd_mutex); + return 0; +out2: + iput(mtd_ino); +out1: + put_mtd_device(mtd); out: mutex_unlock(&mtd_mutex); + simple_release_fs(&mnt, &count); return ret; } /* mtdchar_open */ @@ -162,6 +168,7 @@ static int mtdchar_close(struct inode *inode, struct file *file) put_mtd_device(mtd); file->private_data = NULL; kfree(mfi); + simple_release_fs(&mnt, &count); return 0; } /* mtdchar_close */ @@ -405,7 +412,7 @@ static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd, if (length > 4096) return -EINVAL; - if (!mtd->write_oob) + if (!mtd->_write_oob) ret = -EOPNOTSUPP; else ret = access_ok(VERIFY_READ, ptr, length) ? 0 : -EFAULT; @@ -576,7 +583,7 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, !access_ok(VERIFY_READ, req.usr_data, req.len) || !access_ok(VERIFY_READ, req.usr_oob, req.ooblen)) return -EFAULT; - if (!mtd->write_oob) + if (!mtd->_write_oob) return -EOPNOTSUPP; ops.mode = req.mode; @@ -1175,10 +1182,15 @@ static const struct file_operations mtd_fops = { #endif }; +static const struct super_operations mtd_ops = { + .drop_inode = generic_delete_inode, + .statfs = simple_statfs, +}; + static struct dentry *mtd_inodefs_mount(struct file_system_type *fs_type, int flags, const char *dev_name, void *data) { - return mount_pseudo(fs_type, "mtd_inode:", NULL, NULL, MTD_INODE_FS_MAGIC); + return mount_pseudo(fs_type, "mtd_inode:", &mtd_ops, NULL, MTD_INODE_FS_MAGIC); } static struct file_system_type mtd_inodefs_type = { @@ -1187,26 +1199,6 @@ static struct file_system_type mtd_inodefs_type = { .kill_sb = kill_anon_super, }; -static void mtdchar_notify_add(struct mtd_info *mtd) -{ -} - -static void mtdchar_notify_remove(struct mtd_info *mtd) -{ - struct inode *mtd_ino = ilookup(mtd_inode_mnt->mnt_sb, mtd->index); - - if (mtd_ino) { - /* Destroy the inode if it exists */ - clear_nlink(mtd_ino); - iput(mtd_ino); - } -} - -static struct mtd_notifier mtdchar_notifier = { - .add = mtdchar_notify_add, - .remove = mtdchar_notify_remove, -}; - static int __init init_mtdchar(void) { int ret; @@ -1224,19 +1216,8 @@ static int __init init_mtdchar(void) pr_notice("Can't register mtd_inodefs filesystem: %d\n", ret); goto err_unregister_chdev; } - - mtd_inode_mnt = kern_mount(&mtd_inodefs_type); - if (IS_ERR(mtd_inode_mnt)) { - ret = PTR_ERR(mtd_inode_mnt); - pr_notice("Error mounting mtd_inodefs filesystem: %d\n", ret); - goto err_unregister_filesystem; - } - register_mtd_user(&mtdchar_notifier); - return ret; -err_unregister_filesystem: - unregister_filesystem(&mtd_inodefs_type); err_unregister_chdev: __unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd"); return ret; @@ -1244,8 +1225,6 @@ err_unregister_chdev: static void __exit cleanup_mtdchar(void) { - unregister_mtd_user(&mtdchar_notifier); - kern_unmount(mtd_inode_mnt); unregister_filesystem(&mtd_inodefs_type); __unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd"); } diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 1ed5103b219b..b9000563b9f4 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -72,8 +72,6 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len, int ret = 0, err; int i; - *retlen = 0; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; size_t size, retsize; @@ -126,11 +124,6 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len, int err = -EINVAL; int i; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - - *retlen = 0; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; size_t size, retsize; @@ -145,11 +138,7 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len, else size = len; - if (!(subdev->flags & MTD_WRITEABLE)) - err = -EROFS; - else - err = mtd_write(subdev, to, size, &retsize, buf); - + err = mtd_write(subdev, to, size, &retsize, buf); if (err) break; @@ -176,19 +165,10 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs, int i; int err = -EINVAL; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - - *retlen = 0; - /* Calculate total length of data */ for (i = 0; i < count; i++) total_len += vecs[i].iov_len; - /* Do not allow write past end of device */ - if ((to + total_len) > mtd->size) - return -EINVAL; - /* Check alignment */ if (mtd->writesize > 1) { uint64_t __to = to; @@ -224,12 +204,8 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs, old_iov_len = vecs_copy[entry_high].iov_len; vecs_copy[entry_high].iov_len = size; - if (!(subdev->flags & MTD_WRITEABLE)) - err = -EROFS; - else - err = mtd_writev(subdev, &vecs_copy[entry_low], - entry_high - entry_low + 1, to, - &retsize); + err = mtd_writev(subdev, &vecs_copy[entry_low], + entry_high - entry_low + 1, to, &retsize); vecs_copy[entry_high].iov_len = old_iov_len - size; vecs_copy[entry_high].iov_base += size; @@ -403,15 +379,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) uint64_t length, offset = 0; struct erase_info *erase; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - - if (instr->addr > concat->mtd.size) - return -EINVAL; - - if (instr->len + instr->addr > concat->mtd.size) - return -EINVAL; - /* * Check for proper erase block alignment of the to-be-erased area. * It is easier to do this based on the super device's erase @@ -459,8 +426,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) return -EINVAL; } - instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; - /* make a local copy of instr to avoid modifying the caller's struct */ erase = kmalloc(sizeof (struct erase_info), GFP_KERNEL); @@ -499,10 +464,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) else erase->len = length; - if (!(subdev->flags & MTD_WRITEABLE)) { - err = -EROFS; - break; - } length -= erase->len; if ((err = concat_dev_erase(subdev, erase))) { /* sanity check: should never happen since @@ -538,9 +499,6 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) struct mtd_concat *concat = CONCAT(mtd); int i, err = -EINVAL; - if ((len + ofs) > mtd->size) - return -EINVAL; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; uint64_t size; @@ -575,9 +533,6 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) struct mtd_concat *concat = CONCAT(mtd); int i, err = 0; - if ((len + ofs) > mtd->size) - return -EINVAL; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; uint64_t size; @@ -650,9 +605,6 @@ static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs) if (!mtd_can_have_bb(concat->subdev[0])) return res; - if (ofs > mtd->size) - return -EINVAL; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; @@ -673,12 +625,6 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs) struct mtd_concat *concat = CONCAT(mtd); int i, err = -EINVAL; - if (!mtd_can_have_bb(concat->subdev[0])) - return 0; - - if (ofs > mtd->size) - return -EINVAL; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; @@ -716,10 +662,6 @@ static unsigned long concat_get_unmapped_area(struct mtd_info *mtd, continue; } - /* we've found the subdev over which the mapping will reside */ - if (offset + len > subdev->size) - return (unsigned long) -EINVAL; - return mtd_get_unmapped_area(subdev, len, offset, flags); } @@ -777,16 +719,16 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->mtd.subpage_sft = subdev[0]->subpage_sft; concat->mtd.oobsize = subdev[0]->oobsize; concat->mtd.oobavail = subdev[0]->oobavail; - if (subdev[0]->writev) - concat->mtd.writev = concat_writev; - if (subdev[0]->read_oob) - concat->mtd.read_oob = concat_read_oob; - if (subdev[0]->write_oob) - concat->mtd.write_oob = concat_write_oob; - if (subdev[0]->block_isbad) - concat->mtd.block_isbad = concat_block_isbad; - if (subdev[0]->block_markbad) - concat->mtd.block_markbad = concat_block_markbad; + if (subdev[0]->_writev) + concat->mtd._writev = concat_writev; + if (subdev[0]->_read_oob) + concat->mtd._read_oob = concat_read_oob; + if (subdev[0]->_write_oob) + concat->mtd._write_oob = concat_write_oob; + if (subdev[0]->_block_isbad) + concat->mtd._block_isbad = concat_block_isbad; + if (subdev[0]->_block_markbad) + concat->mtd._block_markbad = concat_block_markbad; concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks; @@ -833,8 +775,8 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c if (concat->mtd.writesize != subdev[i]->writesize || concat->mtd.subpage_sft != subdev[i]->subpage_sft || concat->mtd.oobsize != subdev[i]->oobsize || - !concat->mtd.read_oob != !subdev[i]->read_oob || - !concat->mtd.write_oob != !subdev[i]->write_oob) { + !concat->mtd._read_oob != !subdev[i]->_read_oob || + !concat->mtd._write_oob != !subdev[i]->_write_oob) { kfree(concat); printk("Incompatible OOB or ECC data on \"%s\"\n", subdev[i]->name); @@ -849,15 +791,15 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->num_subdev = num_devs; concat->mtd.name = name; - concat->mtd.erase = concat_erase; - concat->mtd.read = concat_read; - concat->mtd.write = concat_write; - concat->mtd.sync = concat_sync; - concat->mtd.lock = concat_lock; - concat->mtd.unlock = concat_unlock; - concat->mtd.suspend = concat_suspend; - concat->mtd.resume = concat_resume; - concat->mtd.get_unmapped_area = concat_get_unmapped_area; + concat->mtd._erase = concat_erase; + concat->mtd._read = concat_read; + concat->mtd._write = concat_write; + concat->mtd._sync = concat_sync; + concat->mtd._lock = concat_lock; + concat->mtd._unlock = concat_unlock; + concat->mtd._suspend = concat_suspend; + concat->mtd._resume = concat_resume; + concat->mtd._get_unmapped_area = concat_get_unmapped_area; /* * Combine the erase block size info of the subdevices: diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 9a9ce71a71fc..c837507dfb1c 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -107,7 +107,7 @@ static LIST_HEAD(mtd_notifiers); */ static void mtd_release(struct device *dev) { - struct mtd_info *mtd = dev_get_drvdata(dev); + struct mtd_info __maybe_unused *mtd = dev_get_drvdata(dev); dev_t index = MTD_DEVT(mtd->index); /* remove /dev/mtdXro node if needed */ @@ -126,7 +126,7 @@ static int mtd_cls_resume(struct device *dev) { struct mtd_info *mtd = dev_get_drvdata(dev); - if (mtd && mtd->resume) + if (mtd) mtd_resume(mtd); return 0; } @@ -610,8 +610,8 @@ int __get_mtd_device(struct mtd_info *mtd) if (!try_module_get(mtd->owner)) return -ENODEV; - if (mtd->get_device) { - err = mtd->get_device(mtd); + if (mtd->_get_device) { + err = mtd->_get_device(mtd); if (err) { module_put(mtd->owner); @@ -675,14 +675,267 @@ void __put_mtd_device(struct mtd_info *mtd) --mtd->usecount; BUG_ON(mtd->usecount < 0); - if (mtd->put_device) - mtd->put_device(mtd); + if (mtd->_put_device) + mtd->_put_device(mtd); module_put(mtd->owner); } EXPORT_SYMBOL_GPL(__put_mtd_device); /* + * Erase is an asynchronous operation. Device drivers are supposed + * to call instr->callback() whenever the operation completes, even + * if it completes with a failure. + * Callers are supposed to pass a callback function and wait for it + * to be called before writing to the block. + */ +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + if (instr->addr > mtd->size || instr->len > mtd->size - instr->addr) + return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; + if (!instr->len) { + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + return 0; + } + return mtd->_erase(mtd, instr); +} +EXPORT_SYMBOL_GPL(mtd_erase); + +/* + * This stuff for eXecute-In-Place. phys is optional and may be set to NULL. + */ +int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + void **virt, resource_size_t *phys) +{ + *retlen = 0; + *virt = NULL; + if (phys) + *phys = 0; + if (!mtd->_point) + return -EOPNOTSUPP; + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + if (!len) + return 0; + return mtd->_point(mtd, from, len, retlen, virt, phys); +} +EXPORT_SYMBOL_GPL(mtd_point); + +/* We probably shouldn't allow XIP if the unpoint isn't a NULL */ +int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +{ + if (!mtd->_point) + return -EOPNOTSUPP; + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + if (!len) + return 0; + return mtd->_unpoint(mtd, from, len); +} +EXPORT_SYMBOL_GPL(mtd_unpoint); + +/* + * Allow NOMMU mmap() to directly map the device (if not NULL) + * - return the address to which the offset maps + * - return -ENOSYS to indicate refusal to do the mapping + */ +unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len, + unsigned long offset, unsigned long flags) +{ + if (!mtd->_get_unmapped_area) + return -EOPNOTSUPP; + if (offset > mtd->size || len > mtd->size - offset) + return -EINVAL; + return mtd->_get_unmapped_area(mtd, len, offset, flags); +} +EXPORT_SYMBOL_GPL(mtd_get_unmapped_area); + +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf) +{ + *retlen = 0; + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + if (!len) + return 0; + return mtd->_read(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read); + +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf) +{ + *retlen = 0; + if (to < 0 || to > mtd->size || len > mtd->size - to) + return -EINVAL; + if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + if (!len) + return 0; + return mtd->_write(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_write); + +/* + * In blackbox flight recorder like scenarios we want to make successful writes + * in interrupt context. panic_write() is only intended to be called when its + * known the kernel is about to panic and we need the write to succeed. Since + * the kernel is not going to be running for much longer, this function can + * break locks and delay to ensure the write succeeds (but not sleep). + */ +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf) +{ + *retlen = 0; + if (!mtd->_panic_write) + return -EOPNOTSUPP; + if (to < 0 || to > mtd->size || len > mtd->size - to) + return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + if (!len) + return 0; + return mtd->_panic_write(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_panic_write); + +/* + * Method to access the protection register area, present in some flash + * devices. The user data is one time programmable but the factory data is read + * only. + */ +int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len) +{ + if (!mtd->_get_fact_prot_info) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_get_fact_prot_info(mtd, buf, len); +} +EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info); + +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_read_fact_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg); + +int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len) +{ + if (!mtd->_get_user_prot_info) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_get_user_prot_info(mtd, buf, len); +} +EXPORT_SYMBOL_GPL(mtd_get_user_prot_info); + +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_read_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg); + +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_write_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg); + +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len) +{ + if (!mtd->_lock_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_lock_user_prot_reg(mtd, from, len); +} +EXPORT_SYMBOL_GPL(mtd_lock_user_prot_reg); + +/* Chip-supported device locking */ +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_lock) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + if (!len) + return 0; + return mtd->_lock(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_lock); + +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_unlock) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + if (!len) + return 0; + return mtd->_unlock(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_unlock); + +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_is_locked) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + if (!len) + return 0; + return mtd->_is_locked(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_is_locked); + +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs) +{ + if (!mtd->_block_isbad) + return 0; + if (ofs < 0 || ofs > mtd->size) + return -EINVAL; + return mtd->_block_isbad(mtd, ofs); +} +EXPORT_SYMBOL_GPL(mtd_block_isbad); + +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + if (!mtd->_block_markbad) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size) + return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + return mtd->_block_markbad(mtd, ofs); +} +EXPORT_SYMBOL_GPL(mtd_block_markbad); + +/* * default_mtd_writev - the default writev method * @mtd: mtd device description object pointer * @vecs: the vectors to write @@ -729,9 +982,11 @@ int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen) { *retlen = 0; - if (!mtd->writev) + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + if (!mtd->_writev) return default_mtd_writev(mtd, vecs, count, to, retlen); - return mtd->writev(mtd, vecs, count, to, retlen); + return mtd->_writev(mtd, vecs, count, to, retlen); } EXPORT_SYMBOL_GPL(mtd_writev); diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index 3ce99e00a49e..ae36d7e1e913 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -169,7 +169,7 @@ static void mtdoops_workfunc_erase(struct work_struct *work) cxt->nextpage = 0; } - while (mtd_can_have_bb(mtd)) { + while (1) { ret = mtd_block_isbad(mtd, cxt->nextpage * record_size); if (!ret) break; @@ -199,9 +199,9 @@ badblock: return; } - if (mtd_can_have_bb(mtd) && ret == -EIO) { + if (ret == -EIO) { ret = mtd_block_markbad(mtd, cxt->nextpage * record_size); - if (ret < 0) { + if (ret < 0 && ret != -EOPNOTSUPP) { printk(KERN_ERR "mtdoops: block_markbad failed, aborting\n"); return; } @@ -257,8 +257,7 @@ static void find_next_position(struct mtdoops_context *cxt) size_t retlen; for (page = 0; page < cxt->oops_pages; page++) { - if (mtd_can_have_bb(mtd) && - mtd_block_isbad(mtd, page * record_size)) + if (mtd_block_isbad(mtd, page * record_size)) continue; /* Assume the page is used */ mark_page_used(cxt, page); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index a3d44c3416b4..9651c06de0a9 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -65,12 +65,8 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len, int res; stats = part->master->ecc_stats; - - if (from >= mtd->size) - len = 0; - else if (from + len > mtd->size) - len = mtd->size - from; - res = mtd_read(part->master, from + part->offset, len, retlen, buf); + res = part->master->_read(part->master, from + part->offset, len, + retlen, buf); if (unlikely(res)) { if (mtd_is_bitflip(res)) mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected; @@ -84,19 +80,16 @@ static int part_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { struct mtd_part *part = PART(mtd); - if (from >= mtd->size) - len = 0; - else if (from + len > mtd->size) - len = mtd->size - from; - return mtd_point(part->master, from + part->offset, len, retlen, - virt, phys); + + return part->master->_point(part->master, from + part->offset, len, + retlen, virt, phys); } -static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { struct mtd_part *part = PART(mtd); - mtd_unpoint(part->master, from + part->offset, len); + return part->master->_unpoint(part->master, from + part->offset, len); } static unsigned long part_get_unmapped_area(struct mtd_info *mtd, @@ -107,7 +100,8 @@ static unsigned long part_get_unmapped_area(struct mtd_info *mtd, struct mtd_part *part = PART(mtd); offset += part->offset; - return mtd_get_unmapped_area(part->master, len, offset, flags); + return part->master->_get_unmapped_area(part->master, len, offset, + flags); } static int part_read_oob(struct mtd_info *mtd, loff_t from, @@ -138,7 +132,7 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from, return -EINVAL; } - res = mtd_read_oob(part->master, from + part->offset, ops); + res = part->master->_read_oob(part->master, from + part->offset, ops); if (unlikely(res)) { if (mtd_is_bitflip(res)) mtd->ecc_stats.corrected++; @@ -152,55 +146,46 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return mtd_read_user_prot_reg(part->master, from, len, retlen, buf); + return part->master->_read_user_prot_reg(part->master, from, len, + retlen, buf); } static int part_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, size_t len) { struct mtd_part *part = PART(mtd); - return mtd_get_user_prot_info(part->master, buf, len); + return part->master->_get_user_prot_info(part->master, buf, len); } static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return mtd_read_fact_prot_reg(part->master, from, len, retlen, buf); + return part->master->_read_fact_prot_reg(part->master, from, len, + retlen, buf); } static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, size_t len) { struct mtd_part *part = PART(mtd); - return mtd_get_fact_prot_info(part->master, buf, len); + return part->master->_get_fact_prot_info(part->master, buf, len); } static int part_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (to >= mtd->size) - len = 0; - else if (to + len > mtd->size) - len = mtd->size - to; - return mtd_write(part->master, to + part->offset, len, retlen, buf); + return part->master->_write(part->master, to + part->offset, len, + retlen, buf); } static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (to >= mtd->size) - len = 0; - else if (to + len > mtd->size) - len = mtd->size - to; - return mtd_panic_write(part->master, to + part->offset, len, retlen, - buf); + return part->master->_panic_write(part->master, to + part->offset, len, + retlen, buf); } static int part_write_oob(struct mtd_info *mtd, loff_t to, @@ -208,50 +193,43 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to, { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (to >= mtd->size) return -EINVAL; if (ops->datbuf && to + ops->len > mtd->size) return -EINVAL; - return mtd_write_oob(part->master, to + part->offset, ops); + return part->master->_write_oob(part->master, to + part->offset, ops); } static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return mtd_write_user_prot_reg(part->master, from, len, retlen, buf); + return part->master->_write_user_prot_reg(part->master, from, len, + retlen, buf); } static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len) { struct mtd_part *part = PART(mtd); - return mtd_lock_user_prot_reg(part->master, from, len); + return part->master->_lock_user_prot_reg(part->master, from, len); } static int part_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - return mtd_writev(part->master, vecs, count, to + part->offset, - retlen); + return part->master->_writev(part->master, vecs, count, + to + part->offset, retlen); } static int part_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mtd_part *part = PART(mtd); int ret; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (instr->addr >= mtd->size) - return -EINVAL; + instr->addr += part->offset; - ret = mtd_erase(part->master, instr); + ret = part->master->_erase(part->master, instr); if (ret) { if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) instr->fail_addr -= part->offset; @@ -262,7 +240,7 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr) void mtd_erase_callback(struct erase_info *instr) { - if (instr->mtd->erase == part_erase) { + if (instr->mtd->_erase == part_erase) { struct mtd_part *part = PART(instr->mtd); if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) @@ -277,52 +255,44 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback); static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) - return -EINVAL; - return mtd_lock(part->master, ofs + part->offset, len); + return part->master->_lock(part->master, ofs + part->offset, len); } static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) - return -EINVAL; - return mtd_unlock(part->master, ofs + part->offset, len); + return part->master->_unlock(part->master, ofs + part->offset, len); } static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) { struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) - return -EINVAL; - return mtd_is_locked(part->master, ofs + part->offset, len); + return part->master->_is_locked(part->master, ofs + part->offset, len); } static void part_sync(struct mtd_info *mtd) { struct mtd_part *part = PART(mtd); - mtd_sync(part->master); + part->master->_sync(part->master); } static int part_suspend(struct mtd_info *mtd) { struct mtd_part *part = PART(mtd); - return mtd_suspend(part->master); + return part->master->_suspend(part->master); } static void part_resume(struct mtd_info *mtd) { struct mtd_part *part = PART(mtd); - mtd_resume(part->master); + part->master->_resume(part->master); } static int part_block_isbad(struct mtd_info *mtd, loff_t ofs) { struct mtd_part *part = PART(mtd); - if (ofs >= mtd->size) - return -EINVAL; ofs += part->offset; - return mtd_block_isbad(part->master, ofs); + return part->master->_block_isbad(part->master, ofs); } static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) @@ -330,12 +300,8 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) struct mtd_part *part = PART(mtd); int res; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (ofs >= mtd->size) - return -EINVAL; ofs += part->offset; - res = mtd_block_markbad(part->master, ofs); + res = part->master->_block_markbad(part->master, ofs); if (!res) mtd->ecc_stats.badblocks++; return res; @@ -410,54 +376,55 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, */ slave->mtd.dev.parent = master->dev.parent; - slave->mtd.read = part_read; - slave->mtd.write = part_write; + slave->mtd._read = part_read; + slave->mtd._write = part_write; - if (master->panic_write) - slave->mtd.panic_write = part_panic_write; + if (master->_panic_write) + slave->mtd._panic_write = part_panic_write; - if (master->point && master->unpoint) { - slave->mtd.point = part_point; - slave->mtd.unpoint = part_unpoint; + if (master->_point && master->_unpoint) { + slave->mtd._point = part_point; + slave->mtd._unpoint = part_unpoint; } - if (master->get_unmapped_area) - slave->mtd.get_unmapped_area = part_get_unmapped_area; - if (master->read_oob) - slave->mtd.read_oob = part_read_oob; - if (master->write_oob) - slave->mtd.write_oob = part_write_oob; - if (master->read_user_prot_reg) - slave->mtd.read_user_prot_reg = part_read_user_prot_reg; - if (master->read_fact_prot_reg) - slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg; - if (master->write_user_prot_reg) - slave->mtd.write_user_prot_reg = part_write_user_prot_reg; - if (master->lock_user_prot_reg) - slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg; - if (master->get_user_prot_info) - slave->mtd.get_user_prot_info = part_get_user_prot_info; - if (master->get_fact_prot_info) - slave->mtd.get_fact_prot_info = part_get_fact_prot_info; - if (master->sync) - slave->mtd.sync = part_sync; - if (!partno && !master->dev.class && master->suspend && master->resume) { - slave->mtd.suspend = part_suspend; - slave->mtd.resume = part_resume; + if (master->_get_unmapped_area) + slave->mtd._get_unmapped_area = part_get_unmapped_area; + if (master->_read_oob) + slave->mtd._read_oob = part_read_oob; + if (master->_write_oob) + slave->mtd._write_oob = part_write_oob; + if (master->_read_user_prot_reg) + slave->mtd._read_user_prot_reg = part_read_user_prot_reg; + if (master->_read_fact_prot_reg) + slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg; + if (master->_write_user_prot_reg) + slave->mtd._write_user_prot_reg = part_write_user_prot_reg; + if (master->_lock_user_prot_reg) + slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg; + if (master->_get_user_prot_info) + slave->mtd._get_user_prot_info = part_get_user_prot_info; + if (master->_get_fact_prot_info) + slave->mtd._get_fact_prot_info = part_get_fact_prot_info; + if (master->_sync) + slave->mtd._sync = part_sync; + if (!partno && !master->dev.class && master->_suspend && + master->_resume) { + slave->mtd._suspend = part_suspend; + slave->mtd._resume = part_resume; } - if (master->writev) - slave->mtd.writev = part_writev; - if (master->lock) - slave->mtd.lock = part_lock; - if (master->unlock) - slave->mtd.unlock = part_unlock; - if (master->is_locked) - slave->mtd.is_locked = part_is_locked; - if (master->block_isbad) - slave->mtd.block_isbad = part_block_isbad; - if (master->block_markbad) - slave->mtd.block_markbad = part_block_markbad; - slave->mtd.erase = part_erase; + if (master->_writev) + slave->mtd._writev = part_writev; + if (master->_lock) + slave->mtd._lock = part_lock; + if (master->_unlock) + slave->mtd._unlock = part_unlock; + if (master->_is_locked) + slave->mtd._is_locked = part_is_locked; + if (master->_block_isbad) + slave->mtd._block_isbad = part_block_isbad; + if (master->_block_markbad) + slave->mtd._block_markbad = part_block_markbad; + slave->mtd._erase = part_erase; slave->master = master; slave->offset = part->offset; @@ -549,7 +516,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, } slave->mtd.ecclayout = master->ecclayout; - if (master->block_isbad) { + slave->mtd.ecc_strength = master->ecc_strength; + if (master->_block_isbad) { uint64_t offs = 0; while (offs < slave->mtd.size) { @@ -761,7 +729,7 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types, for ( ; ret <= 0 && *types; types++) { parser = get_partition_parser(*types); if (!parser && !request_module("%s", *types)) - parser = get_partition_parser(*types); + parser = get_partition_parser(*types); if (!parser) continue; ret = (*parser->parse_fn)(master, pparts, data); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index a3c4de551ebe..7d17cecad69d 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -314,6 +314,26 @@ config MTD_NAND_DISKONCHIP_BBTWRITE load time (assuming you build diskonchip as a module) with the module parameter "inftl_bbt_write=1". +config MTD_NAND_DOCG4 + tristate "Support for DiskOnChip G4 (EXPERIMENTAL)" + depends on EXPERIMENTAL + select BCH + select BITREVERSE + help + Support for diskonchip G4 nand flash, found in various smartphones and + PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba + Portege G900, Asus P526, and O2 XDA Zinc. + + With this driver you will be able to use UBI and create a ubifs on the + device, so you may wish to consider enabling UBI and UBIFS as well. + + These devices ship with the Mys/Sandisk SAFTL formatting, for which + there is currently no mtd parser, so you may want to use command line + partitioning to segregate write-protected blocks. On the Treo680, the + first five erase blocks (256KiB each) are write-protected, followed + by the block containing the saftl partition table. This is probably + typical. + config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on ARCH_PXA @@ -421,7 +441,6 @@ config MTD_NAND_NANDSIM config MTD_NAND_GPMI_NAND bool "GPMI NAND Flash Controller driver" depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28) - select MTD_CMDLINE_PARTS help Enables NAND Flash support for IMX23 or IMX28. The GPMI controller is very powerful, with the help of BCH diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 19bc8cb1d187..d4b4d8739bd8 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o +obj-$(CONFIG_MTD_NAND_DOCG4) += docg4.o obj-$(CONFIG_MTD_NAND_FSMC) += fsmc_nand.o obj-$(CONFIG_MTD_NAND_H1900) += h1910.o obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c index 6a5ff64a139e..4f20e1d8bef1 100644 --- a/drivers/mtd/nand/alauda.c +++ b/drivers/mtd/nand/alauda.c @@ -585,12 +585,13 @@ static int alauda_init_media(struct alauda *al) mtd->writesize = 1<<card->pageshift; mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->read = alauda_read; - mtd->write = alauda_write; - mtd->erase = alauda_erase; - mtd->block_isbad = alauda_isbad; + mtd->_read = alauda_read; + mtd->_write = alauda_write; + mtd->_erase = alauda_erase; + mtd->_block_isbad = alauda_isbad; mtd->priv = al; mtd->owner = THIS_MODULE; + mtd->ecc_strength = 1; err = mtd_device_register(mtd, NULL, 0); if (err) { diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index ae7e37d9ac17..2165576a1c67 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -603,6 +603,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) nand_chip->ecc.hwctl = atmel_nand_hwctl; nand_chip->ecc.read_page = atmel_nand_read_page; nand_chip->ecc.bytes = 4; + nand_chip->ecc.strength = 1; } nand_chip->chip_delay = 20; /* 20us command delay time */ diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 64c9cbaf86a1..6908cdde3065 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -475,6 +475,14 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) largepage_bbt.options = NAND_BBT_SCAN2NDPAGE; this->badblock_pattern = &largepage_bbt; } + + /* + * FIXME: ecc strength value of 6 bits per 512 bytes of data is a + * conservative guess, given 13 ecc bytes and using bch alg. + * (Assume Galois field order m=15 to allow a margin of error.) + */ + this->ecc.strength = 6; + #endif /* Now finish off the scan, now that ecc.layout has been initialized. */ @@ -487,7 +495,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) /* Register the partitions */ board_mtd->name = "bcm_umi-nand"; - mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0); + mtd_device_parse_register(board_mtd, NULL, NULL, NULL, 0); /* Return happy */ return 0; diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index dd899cb5d366..d7b86b925de5 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -702,9 +702,11 @@ static int bf5xx_nand_scan(struct mtd_info *mtd) if (likely(mtd->writesize >= 512)) { chip->ecc.size = 512; chip->ecc.bytes = 6; + chip->ecc.strength = 2; } else { chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET)); SSYNC(); } diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 72d3f23490c5..2a96e1a12062 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -783,6 +783,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME; cafe->nand.ecc.size = mtd->writesize; cafe->nand.ecc.bytes = 14; + cafe->nand.ecc.strength = 4; cafe->nand.ecc.hwctl = (void *)cafe_nand_bug; cafe->nand.ecc.calculate = (void *)cafe_nand_bug; cafe->nand.ecc.correct = (void *)cafe_nand_bug; @@ -799,7 +800,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, mtd); mtd->name = "cafe_nand"; - mtd_device_parse_register(mtd, part_probes, 0, NULL, 0); + mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0); goto out; diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index 737ef9a04fdb..1024bfc05c86 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -219,7 +219,7 @@ static int __init cmx270_init(void) } /* Register the partitions */ - ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0, + ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, NULL, partition_info, NUM_PARTITIONS); if (ret) goto err_scan; diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 414afa793563..821c34c62500 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -248,6 +248,8 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) goto out_ior; } + this->ecc.strength = 1; + new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs); cs553x_mtd[cs] = new_mtd; @@ -313,7 +315,7 @@ static int __init cs553x_init(void) for (i = 0; i < NR_CS553X_CONTROLLERS; i++) { if (cs553x_mtd[i]) { /* If any devices registered, return success. Else the last error. */ - mtd_device_parse_register(cs553x_mtd[i], NULL, 0, + mtd_device_parse_register(cs553x_mtd[i], NULL, NULL, NULL, 0); err = 0; } diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 6e566156956f..d94b03c207af 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -641,6 +641,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.ecc.bytes = 3; } info->chip.ecc.size = 512; + info->chip.ecc.strength = pdata->ecc_bits; break; default: ret = -EINVAL; @@ -752,8 +753,8 @@ syndrome_done: if (ret < 0) goto err_scan; - ret = mtd_device_parse_register(&info->mtd, NULL, 0, - pdata->parts, pdata->nr_parts); + ret = mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts, + pdata->nr_parts); if (ret < 0) goto err_scan; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 3984d488f9ab..a9e57d686297 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1590,6 +1590,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) ECC_15BITS * (denali->mtd.writesize / ECC_SECTOR_SIZE)))) { /* if MLC OOB size is large enough, use 15bit ECC*/ + denali->nand.ecc.strength = 15; denali->nand.ecc.layout = &nand_15bit_oob; denali->nand.ecc.bytes = ECC_15BITS; iowrite32(15, denali->flash_reg + ECC_CORRECTION); @@ -1600,12 +1601,14 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) " contain 8bit ECC correction codes"); goto failed_req_irq; } else { + denali->nand.ecc.strength = 8; denali->nand.ecc.layout = &nand_8bit_oob; denali->nand.ecc.bytes = ECC_8BITS; iowrite32(8, denali->flash_reg + ECC_CORRECTION); } denali->nand.ecc.bytes *= denali->devnum; + denali->nand.ecc.strength *= denali->devnum; denali->nand.ecc.layout->eccbytes *= denali->mtd.writesize / ECC_SECTOR_SIZE; denali->nand.ecc.layout->oobfree[0].offset = diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index df921e7a496c..e2ca067631cf 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1653,6 +1653,7 @@ static int __init doc_probe(unsigned long physadr) nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = 512; nand->ecc.bytes = 6; + nand->ecc.strength = 2; nand->bbt_options = NAND_BBT_USE_FLASH; doc->physadr = physadr; diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c new file mode 100644 index 000000000000..b08202664543 --- /dev/null +++ b/drivers/mtd/nand/docg4.c @@ -0,0 +1,1377 @@ +/* + * Copyright © 2012 Mike Dunn <mikedunn@newsguy.com> + * + * mtd nand driver for M-Systems DiskOnChip G4 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Tested on the Palm Treo 680. The G4 is also present on Toshiba Portege, Asus + * P526, some HTC smartphones (Wizard, Prophet, ...), O2 XDA Zinc, maybe others. + * Should work on these as well. Let me know! + * + * TODO: + * + * Mechanism for management of password-protected areas + * + * Hamming ecc when reading oob only + * + * According to the M-Sys documentation, this device is also available in a + * "dual-die" configuration having a 256MB capacity, but no mechanism for + * detecting this variant is documented. Currently this driver assumes 128MB + * capacity. + * + * Support for multiple cascaded devices ("floors"). Not sure which gadgets + * contain multiple G4s in a cascaded configuration, if any. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/export.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/bch.h> +#include <linux/bitrev.h> + +/* + * You'll want to ignore badblocks if you're reading a partition that contains + * data written by the TrueFFS library (i.e., by PalmOS, Windows, etc), since + * it does not use mtd nand's method for marking bad blocks (using oob area). + * This will also skip the check of the "page written" flag. + */ +static bool ignore_badblocks; +module_param(ignore_badblocks, bool, 0); +MODULE_PARM_DESC(ignore_badblocks, "no badblock checking performed"); + +struct docg4_priv { + struct mtd_info *mtd; + struct device *dev; + void __iomem *virtadr; + int status; + struct { + unsigned int command; + int column; + int page; + } last_command; + uint8_t oob_buf[16]; + uint8_t ecc_buf[7]; + int oob_page; + struct bch_control *bch; +}; + +/* + * Defines prefixed with DOCG4 are unique to the diskonchip G4. All others are + * shared with other diskonchip devices (P3, G3 at least). + * + * Functions with names prefixed with docg4_ are mtd / nand interface functions + * (though they may also be called internally). All others are internal. + */ + +#define DOC_IOSPACE_DATA 0x0800 + +/* register offsets */ +#define DOC_CHIPID 0x1000 +#define DOC_DEVICESELECT 0x100a +#define DOC_ASICMODE 0x100c +#define DOC_DATAEND 0x101e +#define DOC_NOP 0x103e + +#define DOC_FLASHSEQUENCE 0x1032 +#define DOC_FLASHCOMMAND 0x1034 +#define DOC_FLASHADDRESS 0x1036 +#define DOC_FLASHCONTROL 0x1038 +#define DOC_ECCCONF0 0x1040 +#define DOC_ECCCONF1 0x1042 +#define DOC_HAMMINGPARITY 0x1046 +#define DOC_BCH_SYNDROM(idx) (0x1048 + idx) + +#define DOC_ASICMODECONFIRM 0x1072 +#define DOC_CHIPID_INV 0x1074 +#define DOC_POWERMODE 0x107c + +#define DOCG4_MYSTERY_REG 0x1050 + +/* apparently used only to write oob bytes 6 and 7 */ +#define DOCG4_OOB_6_7 0x1052 + +/* DOC_FLASHSEQUENCE register commands */ +#define DOC_SEQ_RESET 0x00 +#define DOCG4_SEQ_PAGE_READ 0x03 +#define DOCG4_SEQ_FLUSH 0x29 +#define DOCG4_SEQ_PAGEWRITE 0x16 +#define DOCG4_SEQ_PAGEPROG 0x1e +#define DOCG4_SEQ_BLOCKERASE 0x24 + +/* DOC_FLASHCOMMAND register commands */ +#define DOCG4_CMD_PAGE_READ 0x00 +#define DOC_CMD_ERASECYCLE2 0xd0 +#define DOCG4_CMD_FLUSH 0x70 +#define DOCG4_CMD_READ2 0x30 +#define DOC_CMD_PROG_BLOCK_ADDR 0x60 +#define DOCG4_CMD_PAGEWRITE 0x80 +#define DOC_CMD_PROG_CYCLE2 0x10 +#define DOC_CMD_RESET 0xff + +/* DOC_POWERMODE register bits */ +#define DOC_POWERDOWN_READY 0x80 + +/* DOC_FLASHCONTROL register bits */ +#define DOC_CTRL_CE 0x10 +#define DOC_CTRL_UNKNOWN 0x40 +#define DOC_CTRL_FLASHREADY 0x01 + +/* DOC_ECCCONF0 register bits */ +#define DOC_ECCCONF0_READ_MODE 0x8000 +#define DOC_ECCCONF0_UNKNOWN 0x2000 +#define DOC_ECCCONF0_ECC_ENABLE 0x1000 +#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff + +/* DOC_ECCCONF1 register bits */ +#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80 +#define DOC_ECCCONF1_ECC_ENABLE 0x07 +#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20 + +/* DOC_ASICMODE register bits */ +#define DOC_ASICMODE_RESET 0x00 +#define DOC_ASICMODE_NORMAL 0x01 +#define DOC_ASICMODE_POWERDOWN 0x02 +#define DOC_ASICMODE_MDWREN 0x04 +#define DOC_ASICMODE_BDETCT_RESET 0x08 +#define DOC_ASICMODE_RSTIN_RESET 0x10 +#define DOC_ASICMODE_RAM_WE 0x20 + +/* good status values read after read/write/erase operations */ +#define DOCG4_PROGSTATUS_GOOD 0x51 +#define DOCG4_PROGSTATUS_GOOD_2 0xe0 + +/* + * On read operations (page and oob-only), the first byte read from I/O reg is a + * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read + * after reset only) or 0x51, so bit 1 is presumed to be an error indicator. + */ +#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */ + +/* anatomy of the device */ +#define DOCG4_CHIP_SIZE 0x8000000 +#define DOCG4_PAGE_SIZE 0x200 +#define DOCG4_PAGES_PER_BLOCK 0x200 +#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE) +#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE) +#define DOCG4_OOB_SIZE 0x10 +#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */ +#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */ +#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */ + +/* all but the last byte is included in ecc calculation */ +#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1) + +#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */ + +/* expected values from the ID registers */ +#define DOCG4_IDREG1_VALUE 0x0400 +#define DOCG4_IDREG2_VALUE 0xfbff + +/* primitive polynomial used to build the Galois field used by hw ecc gen */ +#define DOCG4_PRIMITIVE_POLY 0x4443 + +#define DOCG4_M 14 /* Galois field is of order 2^14 */ +#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */ + +#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */ + +/* + * Oob bytes 0 - 6 are available to the user. + * Byte 7 is hamming ecc for first 7 bytes. Bytes 8 - 14 are hw-generated ecc. + * Byte 15 (the last) is used by the driver as a "page written" flag. + */ +static struct nand_ecclayout docg4_oobinfo = { + .eccbytes = 9, + .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15}, + .oobavail = 7, + .oobfree = { {0, 7} } +}; + +/* + * The device has a nop register which M-Sys claims is for the purpose of + * inserting precise delays. But beware; at least some operations fail if the + * nop writes are replaced with a generic delay! + */ +static inline void write_nop(void __iomem *docptr) +{ + writew(0, docptr + DOC_NOP); +} + +static void docg4_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + struct nand_chip *nand = mtd->priv; + uint16_t *p = (uint16_t *) buf; + len >>= 1; + + for (i = 0; i < len; i++) + p[i] = readw(nand->IO_ADDR_R); +} + +static void docg4_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + struct nand_chip *nand = mtd->priv; + uint16_t *p = (uint16_t *) buf; + len >>= 1; + + for (i = 0; i < len; i++) + writew(p[i], nand->IO_ADDR_W); +} + +static int poll_status(struct docg4_priv *doc) +{ + /* + * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL + * register. Operations known to take a long time (e.g., block erase) + * should sleep for a while before calling this. + */ + + uint16_t flash_status; + unsigned int timeo; + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, "%s...\n", __func__); + + /* hardware quirk requires reading twice initially */ + flash_status = readw(docptr + DOC_FLASHCONTROL); + + timeo = 1000; + do { + cpu_relax(); + flash_status = readb(docptr + DOC_FLASHCONTROL); + } while (!(flash_status & DOC_CTRL_FLASHREADY) && --timeo); + + + if (!timeo) { + dev_err(doc->dev, "%s: timed out!\n", __func__); + return NAND_STATUS_FAIL; + } + + if (unlikely(timeo < 50)) + dev_warn(doc->dev, "%s: nearly timed out; %d remaining\n", + __func__, timeo); + + return 0; +} + + +static int docg4_wait(struct mtd_info *mtd, struct nand_chip *nand) +{ + + struct docg4_priv *doc = nand->priv; + int status = NAND_STATUS_WP; /* inverse logic?? */ + dev_dbg(doc->dev, "%s...\n", __func__); + + /* report any previously unreported error */ + if (doc->status) { + status |= doc->status; + doc->status = 0; + return status; + } + + status |= poll_status(doc); + return status; +} + +static void docg4_select_chip(struct mtd_info *mtd, int chip) +{ + /* + * Select among multiple cascaded chips ("floors"). Multiple floors are + * not yet supported, so the only valid non-negative value is 0. + */ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, "%s: chip %d\n", __func__, chip); + + if (chip < 0) + return; /* deselected */ + + if (chip > 0) + dev_warn(doc->dev, "multiple floors currently unsupported\n"); + + writew(0, docptr + DOC_DEVICESELECT); +} + +static void reset(struct mtd_info *mtd) +{ + /* full device reset */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + writew(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN, + docptr + DOC_ASICMODE); + writew(~(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN), + docptr + DOC_ASICMODECONFIRM); + write_nop(docptr); + + writew(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN, + docptr + DOC_ASICMODE); + writew(~(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN), + docptr + DOC_ASICMODECONFIRM); + + writew(DOC_ECCCONF1_ECC_ENABLE, docptr + DOC_ECCCONF1); + + poll_status(doc); +} + +static void read_hw_ecc(void __iomem *docptr, uint8_t *ecc_buf) +{ + /* read the 7 hw-generated ecc bytes */ + + int i; + for (i = 0; i < 7; i++) { /* hw quirk; read twice */ + ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i)); + ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i)); + } +} + +static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page) +{ + /* + * Called after a page read when hardware reports bitflips. + * Up to four bitflips can be corrected. + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + int i, numerrs, errpos[4]; + const uint8_t blank_read_hwecc[8] = { + 0xcf, 0x72, 0xfc, 0x1b, 0xa9, 0xc7, 0xb9, 0 }; + + read_hw_ecc(docptr, doc->ecc_buf); /* read 7 hw-generated ecc bytes */ + + /* check if read error is due to a blank page */ + if (!memcmp(doc->ecc_buf, blank_read_hwecc, 7)) + return 0; /* yes */ + + /* skip additional check of "written flag" if ignore_badblocks */ + if (ignore_badblocks == false) { + + /* + * If the hw ecc bytes are not those of a blank page, there's + * still a chance that the page is blank, but was read with + * errors. Check the "written flag" in last oob byte, which + * is set to zero when a page is written. If more than half + * the bits are set, assume a blank page. Unfortunately, the + * bit flips(s) are not reported in stats. + */ + + if (doc->oob_buf[15]) { + int bit, numsetbits = 0; + unsigned long written_flag = doc->oob_buf[15]; + for_each_set_bit(bit, &written_flag, 8) + numsetbits++; + if (numsetbits > 4) { /* assume blank */ + dev_warn(doc->dev, + "error(s) in blank page " + "at offset %08x\n", + page * DOCG4_PAGE_SIZE); + return 0; + } + } + } + + /* + * The hardware ecc unit produces oob_ecc ^ calc_ecc. The kernel's bch + * algorithm is used to decode this. However the hw operates on page + * data in a bit order that is the reverse of that of the bch alg, + * requiring that the bits be reversed on the result. Thanks to Ivan + * Djelic for his analysis! + */ + for (i = 0; i < 7; i++) + doc->ecc_buf[i] = bitrev8(doc->ecc_buf[i]); + + numerrs = decode_bch(doc->bch, NULL, DOCG4_USERDATA_LEN, NULL, + doc->ecc_buf, NULL, errpos); + + if (numerrs == -EBADMSG) { + dev_warn(doc->dev, "uncorrectable errors at offset %08x\n", + page * DOCG4_PAGE_SIZE); + return -EBADMSG; + } + + BUG_ON(numerrs < 0); /* -EINVAL, or anything other than -EBADMSG */ + + /* undo last step in BCH alg (modulo mirroring not needed) */ + for (i = 0; i < numerrs; i++) + errpos[i] = (errpos[i] & ~7)|(7-(errpos[i] & 7)); + + /* fix the errors */ + for (i = 0; i < numerrs; i++) { + + /* ignore if error within oob ecc bytes */ + if (errpos[i] > DOCG4_USERDATA_LEN * 8) + continue; + + /* if error within oob area preceeding ecc bytes... */ + if (errpos[i] > DOCG4_PAGE_SIZE * 8) + change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8, + (unsigned long *)doc->oob_buf); + + else /* error in page data */ + change_bit(errpos[i], (unsigned long *)buf); + } + + dev_notice(doc->dev, "%d error(s) corrected at offset %08x\n", + numerrs, page * DOCG4_PAGE_SIZE); + + return numerrs; +} + +static uint8_t docg4_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + + dev_dbg(doc->dev, "%s\n", __func__); + + if (doc->last_command.command == NAND_CMD_STATUS) { + int status; + + /* + * Previous nand command was status request, so nand + * infrastructure code expects to read the status here. If an + * error occurred in a previous operation, report it. + */ + doc->last_command.command = 0; + + if (doc->status) { + status = doc->status; + doc->status = 0; + } + + /* why is NAND_STATUS_WP inverse logic?? */ + else + status = NAND_STATUS_WP | NAND_STATUS_READY; + + return status; + } + + dev_warn(doc->dev, "unexpectd call to read_byte()\n"); + + return 0; +} + +static void write_addr(struct docg4_priv *doc, uint32_t docg4_addr) +{ + /* write the four address bytes packed in docg4_addr to the device */ + + void __iomem *docptr = doc->virtadr; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); +} + +static int read_progstatus(struct docg4_priv *doc) +{ + /* + * This apparently checks the status of programming. Done after an + * erasure, and after page data is written. On error, the status is + * saved, to be later retrieved by the nand infrastructure code. + */ + void __iomem *docptr = doc->virtadr; + + /* status is read from the I/O reg */ + uint16_t status1 = readw(docptr + DOC_IOSPACE_DATA); + uint16_t status2 = readw(docptr + DOC_IOSPACE_DATA); + uint16_t status3 = readw(docptr + DOCG4_MYSTERY_REG); + + dev_dbg(doc->dev, "docg4: %s: %02x %02x %02x\n", + __func__, status1, status2, status3); + + if (status1 != DOCG4_PROGSTATUS_GOOD + || status2 != DOCG4_PROGSTATUS_GOOD_2 + || status3 != DOCG4_PROGSTATUS_GOOD_2) { + doc->status = NAND_STATUS_FAIL; + dev_warn(doc->dev, "read_progstatus failed: " + "%02x, %02x, %02x\n", status1, status2, status3); + return -EIO; + } + return 0; +} + +static int pageprog(struct mtd_info *mtd) +{ + /* + * Final step in writing a page. Writes the contents of its + * internal buffer out to the flash array, or some such. + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + int retval = 0; + + dev_dbg(doc->dev, "docg4: %s\n", __func__); + + writew(DOCG4_SEQ_PAGEPROG, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_PROG_CYCLE2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + /* Just busy-wait; usleep_range() slows things down noticeably. */ + poll_status(doc); + + writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND); + writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + retval = read_progstatus(doc); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + poll_status(doc); + write_nop(docptr); + + return retval; +} + +static void sequence_reset(struct mtd_info *mtd) +{ + /* common starting sequence for all operations */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + writew(DOC_CTRL_UNKNOWN | DOC_CTRL_CE, docptr + DOC_FLASHCONTROL); + writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + poll_status(doc); + write_nop(docptr); +} + +static void read_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr) +{ + /* first step in reading a page */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, + "docg4: %s: g4 page %08x\n", __func__, docg4_addr); + + sequence_reset(mtd); + + writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + + write_addr(doc, docg4_addr); + + write_nop(docptr); + writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + poll_status(doc); +} + +static void write_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr) +{ + /* first step in writing a page */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, + "docg4: %s: g4 addr: %x\n", __func__, docg4_addr); + sequence_reset(mtd); + writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_addr(doc, docg4_addr); + write_nop(docptr); + write_nop(docptr); + poll_status(doc); +} + +static uint32_t mtd_to_docg4_address(int page, int column) +{ + /* + * Convert mtd address to format used by the device, 32 bit packed. + * + * Some notes on G4 addressing... The M-Sys documentation on this device + * claims that pages are 2K in length, and indeed, the format of the + * address used by the device reflects that. But within each page are + * four 512 byte "sub-pages", each with its own oob data that is + * read/written immediately after the 512 bytes of page data. This oob + * data contains the ecc bytes for the preceeding 512 bytes. + * + * Rather than tell the mtd nand infrastructure that page size is 2k, + * with four sub-pages each, we engage in a little subterfuge and tell + * the infrastructure code that pages are 512 bytes in size. This is + * done because during the course of reverse-engineering the device, I + * never observed an instance where an entire 2K "page" was read or + * written as a unit. Each "sub-page" is always addressed individually, + * its data read/written, and ecc handled before the next "sub-page" is + * addressed. + * + * This requires us to convert addresses passed by the mtd nand + * infrastructure code to those used by the device. + * + * The address that is written to the device consists of four bytes: the + * first two are the 2k page number, and the second is the index into + * the page. The index is in terms of 16-bit half-words and includes + * the preceeding oob data, so e.g., the index into the second + * "sub-page" is 0x108, and the full device address of the start of mtd + * page 0x201 is 0x00800108. + */ + int g4_page = page / 4; /* device's 2K page */ + int g4_index = (page % 4) * 0x108 + column/2; /* offset into page */ + return (g4_page << 16) | g4_index; /* pack */ +} + +static void docg4_command(struct mtd_info *mtd, unsigned command, int column, + int page_addr) +{ + /* handle standard nand commands */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + uint32_t g4_addr = mtd_to_docg4_address(page_addr, column); + + dev_dbg(doc->dev, "%s %x, page_addr=%x, column=%x\n", + __func__, command, page_addr, column); + + /* + * Save the command and its arguments. This enables emulation of + * standard flash devices, and also some optimizations. + */ + doc->last_command.command = command; + doc->last_command.column = column; + doc->last_command.page = page_addr; + + switch (command) { + + case NAND_CMD_RESET: + reset(mtd); + break; + + case NAND_CMD_READ0: + read_page_prologue(mtd, g4_addr); + break; + + case NAND_CMD_STATUS: + /* next call to read_byte() will expect a status */ + break; + + case NAND_CMD_SEQIN: + write_page_prologue(mtd, g4_addr); + + /* hack for deferred write of oob bytes */ + if (doc->oob_page == page_addr) + memcpy(nand->oob_poi, doc->oob_buf, 16); + break; + + case NAND_CMD_PAGEPROG: + pageprog(mtd); + break; + + /* we don't expect these, based on review of nand_base.c */ + case NAND_CMD_READOOB: + case NAND_CMD_READID: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + dev_warn(doc->dev, "docg4_command: " + "unexpected nand command 0x%x\n", command); + break; + + } +} + +static int read_page(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page, bool use_ecc) +{ + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint16_t status, edc_err, *buf16; + + dev_dbg(doc->dev, "%s: page %08x\n", __func__, page); + + writew(DOC_ECCCONF0_READ_MODE | + DOC_ECCCONF0_ECC_ENABLE | + DOC_ECCCONF0_UNKNOWN | + DOCG4_BCH_SIZE, + docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + /* the 1st byte from the I/O reg is a status; the rest is page data */ + status = readw(docptr + DOC_IOSPACE_DATA); + if (status & DOCG4_READ_ERROR) { + dev_err(doc->dev, + "docg4_read_page: bad status: 0x%02x\n", status); + writew(0, docptr + DOC_DATAEND); + return -EIO; + } + + dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status); + + docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */ + + /* + * Diskonchips read oob immediately after a page read. Mtd + * infrastructure issues a separate command for reading oob after the + * page is read. So we save the oob bytes in a local buffer and just + * copy it if the next command reads oob from the same page. + */ + + /* first 14 oob bytes read from I/O reg */ + docg4_read_buf(mtd, doc->oob_buf, 14); + + /* last 2 read from another reg */ + buf16 = (uint16_t *)(doc->oob_buf + 14); + *buf16 = readw(docptr + DOCG4_MYSTERY_REG); + + write_nop(docptr); + + if (likely(use_ecc == true)) { + + /* read the register that tells us if bitflip(s) detected */ + edc_err = readw(docptr + DOC_ECCCONF1); + edc_err = readw(docptr + DOC_ECCCONF1); + dev_dbg(doc->dev, "%s: edc_err = 0x%02x\n", __func__, edc_err); + + /* If bitflips are reported, attempt to correct with ecc */ + if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) { + int bits_corrected = correct_data(mtd, buf, page); + if (bits_corrected == -EBADMSG) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += bits_corrected; + } + } + + writew(0, docptr + DOC_DATAEND); + return 0; +} + + +static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page) +{ + return read_page(mtd, nand, buf, page, false); +} + +static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page) +{ + return read_page(mtd, nand, buf, page, true); +} + +static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page, int sndcmd) +{ + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint16_t status; + + dev_dbg(doc->dev, "%s: page %x\n", __func__, page); + + /* + * Oob bytes are read as part of a normal page read. If the previous + * nand command was a read of the page whose oob is now being read, just + * copy the oob bytes that we saved in a local buffer and avoid a + * separate oob read. + */ + if (doc->last_command.command == NAND_CMD_READ0 && + doc->last_command.page == page) { + memcpy(nand->oob_poi, doc->oob_buf, 16); + return 0; + } + + /* + * Separate read of oob data only. + */ + docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page); + + writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + /* the 1st byte from the I/O reg is a status; the rest is oob data */ + status = readw(docptr + DOC_IOSPACE_DATA); + if (status & DOCG4_READ_ERROR) { + dev_warn(doc->dev, + "docg4_read_oob failed: status = 0x%02x\n", status); + return -EIO; + } + + dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status); + + docg4_read_buf(mtd, nand->oob_poi, 16); + + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + + return 0; +} + +static void docg4_erase_block(struct mtd_info *mtd, int page) +{ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint16_t g4_page; + + dev_dbg(doc->dev, "%s: page %04x\n", __func__, page); + + sequence_reset(mtd); + + writew(DOCG4_SEQ_BLOCKERASE, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_PROG_BLOCK_ADDR, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + + /* only 2 bytes of address are written to specify erase block */ + g4_page = (uint16_t)(page / 4); /* to g4's 2k page addressing */ + writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS); + g4_page >>= 8; + writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS); + write_nop(docptr); + + /* start the erasure */ + writew(DOC_CMD_ERASECYCLE2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + usleep_range(500, 1000); /* erasure is long; take a snooze */ + poll_status(doc); + writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND); + writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + read_progstatus(doc); + + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + poll_status(doc); + write_nop(docptr); +} + +static void write_page(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf, bool use_ecc) +{ + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint8_t ecc_buf[8]; + + dev_dbg(doc->dev, "%s...\n", __func__); + + writew(DOC_ECCCONF0_ECC_ENABLE | + DOC_ECCCONF0_UNKNOWN | + DOCG4_BCH_SIZE, + docptr + DOC_ECCCONF0); + write_nop(docptr); + + /* write the page data */ + docg4_write_buf16(mtd, buf, DOCG4_PAGE_SIZE); + + /* oob bytes 0 through 5 are written to I/O reg */ + docg4_write_buf16(mtd, nand->oob_poi, 6); + + /* oob byte 6 written to a separate reg */ + writew(nand->oob_poi[6], docptr + DOCG4_OOB_6_7); + + write_nop(docptr); + write_nop(docptr); + + /* write hw-generated ecc bytes to oob */ + if (likely(use_ecc == true)) { + /* oob byte 7 is hamming code */ + uint8_t hamming = readb(docptr + DOC_HAMMINGPARITY); + hamming = readb(docptr + DOC_HAMMINGPARITY); /* 2nd read */ + writew(hamming, docptr + DOCG4_OOB_6_7); + write_nop(docptr); + + /* read the 7 bch bytes from ecc regs */ + read_hw_ecc(docptr, ecc_buf); + ecc_buf[7] = 0; /* clear the "page written" flag */ + } + + /* write user-supplied bytes to oob */ + else { + writew(nand->oob_poi[7], docptr + DOCG4_OOB_6_7); + write_nop(docptr); + memcpy(ecc_buf, &nand->oob_poi[8], 8); + } + + docg4_write_buf16(mtd, ecc_buf, 8); + write_nop(docptr); + write_nop(docptr); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); +} + +static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf) +{ + return write_page(mtd, nand, buf, false); +} + +static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf) +{ + return write_page(mtd, nand, buf, true); +} + +static int docg4_write_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page) +{ + /* + * Writing oob-only is not really supported, because MLC nand must write + * oob bytes at the same time as page data. Nonetheless, we save the + * oob buffer contents here, and then write it along with the page data + * if the same page is subsequently written. This allows user space + * utilities that write the oob data prior to the page data to work + * (e.g., nandwrite). The disdvantage is that, if the intention was to + * write oob only, the operation is quietly ignored. Also, oob can get + * corrupted if two concurrent processes are running nandwrite. + */ + + /* note that bytes 7..14 are hw generated hamming/ecc and overwritten */ + struct docg4_priv *doc = nand->priv; + doc->oob_page = page; + memcpy(doc->oob_buf, nand->oob_poi, 16); + return 0; +} + +static int __init read_factory_bbt(struct mtd_info *mtd) +{ + /* + * The device contains a read-only factory bad block table. Read it and + * update the memory-based bbt accordingly. + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0); + uint8_t *buf; + int i, block, status; + + buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + read_page_prologue(mtd, g4_addr); + status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE); + if (status) + goto exit; + + /* + * If no memory-based bbt was created, exit. This will happen if module + * parameter ignore_badblocks is set. Then why even call this function? + * For an unknown reason, block erase always fails if it's the first + * operation after device power-up. The above read ensures it never is. + * Ugly, I know. + */ + if (nand->bbt == NULL) /* no memory-based bbt */ + goto exit; + + /* + * Parse factory bbt and update memory-based bbt. Factory bbt format is + * simple: one bit per block, block numbers increase left to right (msb + * to lsb). Bit clear means bad block. + */ + for (i = block = 0; block < DOCG4_NUMBLOCKS; block += 8, i++) { + int bitnum; + unsigned long bits = ~buf[i]; + for_each_set_bit(bitnum, &bits, 8) { + int badblock = block + 7 - bitnum; + nand->bbt[badblock / 4] |= + 0x03 << ((badblock % 4) * 2); + mtd->ecc_stats.badblocks++; + dev_notice(doc->dev, "factory-marked bad block: %d\n", + badblock); + } + } + exit: + kfree(buf); + return status; +} + +static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + /* + * Mark a block as bad. Bad blocks are marked in the oob area of the + * first page of the block. The default scan_bbt() in the nand + * infrastructure code works fine for building the memory-based bbt + * during initialization, as does the nand infrastructure function that + * checks if a block is bad by reading the bbt. This function replaces + * the nand default because writes to oob-only are not supported. + */ + + int ret, i; + uint8_t *buf; + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + struct nand_bbt_descr *bbtd = nand->badblock_pattern; + int block = (int)(ofs >> nand->bbt_erase_shift); + int page = (int)(ofs >> nand->page_shift); + uint32_t g4_addr = mtd_to_docg4_address(page, 0); + + dev_dbg(doc->dev, "%s: %08llx\n", __func__, ofs); + + if (unlikely(ofs & (DOCG4_BLOCK_SIZE - 1))) + dev_warn(doc->dev, "%s: ofs %llx not start of block!\n", + __func__, ofs); + + /* allocate blank buffer for page data */ + buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + /* update bbt in memory */ + nand->bbt[block / 4] |= 0x01 << ((block & 0x03) * 2); + + /* write bit-wise negation of pattern to oob buffer */ + memset(nand->oob_poi, 0xff, mtd->oobsize); + for (i = 0; i < bbtd->len; i++) + nand->oob_poi[bbtd->offs + i] = ~bbtd->pattern[i]; + + /* write first page of block */ + write_page_prologue(mtd, g4_addr); + docg4_write_page(mtd, nand, buf); + ret = pageprog(mtd); + if (!ret) + mtd->ecc_stats.badblocks++; + + kfree(buf); + + return ret; +} + +static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + /* only called when module_param ignore_badblocks is set */ + return 0; +} + +static int docg4_suspend(struct platform_device *pdev, pm_message_t state) +{ + /* + * Put the device into "deep power-down" mode. Note that CE# must be + * deasserted for this to take effect. The xscale, e.g., can be + * configured to float this signal when the processor enters power-down, + * and a suitable pull-up ensures its deassertion. + */ + + int i; + uint8_t pwr_down; + struct docg4_priv *doc = platform_get_drvdata(pdev); + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, "%s...\n", __func__); + + /* poll the register that tells us we're ready to go to sleep */ + for (i = 0; i < 10; i++) { + pwr_down = readb(docptr + DOC_POWERMODE); + if (pwr_down & DOC_POWERDOWN_READY) + break; + usleep_range(1000, 4000); + } + + if (pwr_down & DOC_POWERDOWN_READY) { + dev_err(doc->dev, "suspend failed; " + "timeout polling DOC_POWERDOWN_READY\n"); + return -EIO; + } + + writew(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN, + docptr + DOC_ASICMODE); + writew(~(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN), + docptr + DOC_ASICMODECONFIRM); + + write_nop(docptr); + + return 0; +} + +static int docg4_resume(struct platform_device *pdev) +{ + + /* + * Exit power-down. Twelve consecutive reads of the address below + * accomplishes this, assuming CE# has been asserted. + */ + + struct docg4_priv *doc = platform_get_drvdata(pdev); + void __iomem *docptr = doc->virtadr; + int i; + + dev_dbg(doc->dev, "%s...\n", __func__); + + for (i = 0; i < 12; i++) + readb(docptr + 0x1fff); + + return 0; +} + +static void __init init_mtd_structs(struct mtd_info *mtd) +{ + /* initialize mtd and nand data structures */ + + /* + * Note that some of the following initializations are not usually + * required within a nand driver because they are performed by the nand + * infrastructure code as part of nand_scan(). In this case they need + * to be initialized here because we skip call to nand_scan_ident() (the + * first half of nand_scan()). The call to nand_scan_ident() is skipped + * because for this device the chip id is not read in the manner of a + * standard nand device. Unfortunately, nand_scan_ident() does other + * things as well, such as call nand_set_defaults(). + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + + mtd->size = DOCG4_CHIP_SIZE; + mtd->name = "Msys_Diskonchip_G4"; + mtd->writesize = DOCG4_PAGE_SIZE; + mtd->erasesize = DOCG4_BLOCK_SIZE; + mtd->oobsize = DOCG4_OOB_SIZE; + nand->chipsize = DOCG4_CHIP_SIZE; + nand->chip_shift = DOCG4_CHIP_SHIFT; + nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT; + nand->chip_delay = 20; + nand->page_shift = DOCG4_PAGE_SHIFT; + nand->pagemask = 0x3ffff; + nand->badblockpos = NAND_LARGE_BADBLOCK_POS; + nand->badblockbits = 8; + nand->ecc.layout = &docg4_oobinfo; + nand->ecc.mode = NAND_ECC_HW_SYNDROME; + nand->ecc.size = DOCG4_PAGE_SIZE; + nand->ecc.prepad = 8; + nand->ecc.bytes = 8; + nand->ecc.strength = DOCG4_T; + nand->options = + NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR; + nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA; + nand->controller = &nand->hwcontrol; + spin_lock_init(&nand->controller->lock); + init_waitqueue_head(&nand->controller->wq); + + /* methods */ + nand->cmdfunc = docg4_command; + nand->waitfunc = docg4_wait; + nand->select_chip = docg4_select_chip; + nand->read_byte = docg4_read_byte; + nand->block_markbad = docg4_block_markbad; + nand->read_buf = docg4_read_buf; + nand->write_buf = docg4_write_buf16; + nand->scan_bbt = nand_default_bbt; + nand->erase_cmd = docg4_erase_block; + nand->ecc.read_page = docg4_read_page; + nand->ecc.write_page = docg4_write_page; + nand->ecc.read_page_raw = docg4_read_page_raw; + nand->ecc.write_page_raw = docg4_write_page_raw; + nand->ecc.read_oob = docg4_read_oob; + nand->ecc.write_oob = docg4_write_oob; + + /* + * The way the nand infrastructure code is written, a memory-based bbt + * is not created if NAND_SKIP_BBTSCAN is set. With no memory bbt, + * nand->block_bad() is used. So when ignoring bad blocks, we skip the + * scan and define a dummy block_bad() which always returns 0. + */ + if (ignore_badblocks) { + nand->options |= NAND_SKIP_BBTSCAN; + nand->block_bad = docg4_block_neverbad; + } + +} + +static int __init read_id_reg(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint16_t id1, id2; + + /* check for presence of g4 chip by reading id registers */ + id1 = readw(docptr + DOC_CHIPID); + id1 = readw(docptr + DOCG4_MYSTERY_REG); + id2 = readw(docptr + DOC_CHIPID_INV); + id2 = readw(docptr + DOCG4_MYSTERY_REG); + + if (id1 == DOCG4_IDREG1_VALUE && id2 == DOCG4_IDREG2_VALUE) { + dev_info(doc->dev, + "NAND device: 128MiB Diskonchip G4 detected\n"); + return 0; + } + + return -ENODEV; +} + +static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL }; + +static int __init probe_docg4(struct platform_device *pdev) +{ + struct mtd_info *mtd; + struct nand_chip *nand; + void __iomem *virtadr; + struct docg4_priv *doc; + int len, retval; + struct resource *r; + struct device *dev = &pdev->dev; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(dev, "no io memory resource defined!\n"); + return -ENODEV; + } + + virtadr = ioremap(r->start, resource_size(r)); + if (!virtadr) { + dev_err(dev, "Diskonchip ioremap failed: %pR\n", r); + return -EIO; + } + + len = sizeof(struct mtd_info) + sizeof(struct nand_chip) + + sizeof(struct docg4_priv); + mtd = kzalloc(len, GFP_KERNEL); + if (mtd == NULL) { + retval = -ENOMEM; + goto fail; + } + nand = (struct nand_chip *) (mtd + 1); + doc = (struct docg4_priv *) (nand + 1); + mtd->priv = nand; + nand->priv = doc; + mtd->owner = THIS_MODULE; + doc->virtadr = virtadr; + doc->dev = dev; + + init_mtd_structs(mtd); + + /* initialize kernel bch algorithm */ + doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY); + if (doc->bch == NULL) { + retval = -EINVAL; + goto fail; + } + + platform_set_drvdata(pdev, doc); + + reset(mtd); + retval = read_id_reg(mtd); + if (retval == -ENODEV) { + dev_warn(dev, "No diskonchip G4 device found.\n"); + goto fail; + } + + retval = nand_scan_tail(mtd); + if (retval) + goto fail; + + retval = read_factory_bbt(mtd); + if (retval) + goto fail; + + retval = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0); + if (retval) + goto fail; + + doc->mtd = mtd; + return 0; + + fail: + iounmap(virtadr); + if (mtd) { + /* re-declarations avoid compiler warning */ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + nand_release(mtd); /* deletes partitions and mtd devices */ + platform_set_drvdata(pdev, NULL); + free_bch(doc->bch); + kfree(mtd); + } + + return retval; +} + +static int __exit cleanup_docg4(struct platform_device *pdev) +{ + struct docg4_priv *doc = platform_get_drvdata(pdev); + nand_release(doc->mtd); + platform_set_drvdata(pdev, NULL); + free_bch(doc->bch); + kfree(doc->mtd); + iounmap(doc->virtadr); + return 0; +} + +static struct platform_driver docg4_driver = { + .driver = { + .name = "docg4", + .owner = THIS_MODULE, + }, + .suspend = docg4_suspend, + .resume = docg4_resume, + .remove = __exit_p(cleanup_docg4), +}; + +static int __init docg4_init(void) +{ + return platform_driver_probe(&docg4_driver, probe_docg4); +} + +static void __exit docg4_exit(void) +{ + platform_driver_unregister(&docg4_driver); +} + +module_init(docg4_init); +module_exit(docg4_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mike Dunn"); +MODULE_DESCRIPTION("M-Systems DiskOnChip G4 device driver"); diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 7195ee6efe12..80b5264f0a32 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -813,6 +813,12 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0; chip->ecc.size = 512; chip->ecc.bytes = 3; + chip->ecc.strength = 1; + /* + * FIXME: can hardware ecc correct 4 bitflips if page size is + * 2k? Then does hardware report number of corrections for this + * case? If so, ecc_stats reporting needs to be fixed as well. + */ } else { /* otherwise fall back to default software ECC */ chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index e53b76064133..1b8330e1155a 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -17,6 +17,10 @@ */ #include <linux/clk.h> +#include <linux/completion.h> +#include <linux/dmaengine.h> +#include <linux/dma-direction.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/init.h> #include <linux/module.h> @@ -27,6 +31,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/slab.h> @@ -34,7 +39,7 @@ #include <linux/amba/bus.h> #include <mtd/mtd-abi.h> -static struct nand_ecclayout fsmc_ecc1_layout = { +static struct nand_ecclayout fsmc_ecc1_128_layout = { .eccbytes = 24, .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52, 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116}, @@ -50,7 +55,127 @@ static struct nand_ecclayout fsmc_ecc1_layout = { } }; -static struct nand_ecclayout fsmc_ecc4_lp_layout = { +static struct nand_ecclayout fsmc_ecc1_64_layout = { + .eccbytes = 12, + .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52}, + .oobfree = { + {.offset = 8, .length = 8}, + {.offset = 24, .length = 8}, + {.offset = 40, .length = 8}, + {.offset = 56, .length = 8}, + } +}; + +static struct nand_ecclayout fsmc_ecc1_16_layout = { + .eccbytes = 3, + .eccpos = {2, 3, 4}, + .oobfree = { + {.offset = 8, .length = 8}, + } +}; + +/* + * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes + * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46 + * bytes are free for use. + */ +static struct nand_ecclayout fsmc_ecc4_256_layout = { + .eccbytes = 208, + .eccpos = { 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 14, + 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, + 34, 35, 36, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, + 50, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, + 66, 67, 68, 69, 70, 71, 72, + 73, 74, 75, 76, 77, 78, + 82, 83, 84, 85, 86, 87, 88, + 89, 90, 91, 92, 93, 94, + 98, 99, 100, 101, 102, 103, 104, + 105, 106, 107, 108, 109, 110, + 114, 115, 116, 117, 118, 119, 120, + 121, 122, 123, 124, 125, 126, + 130, 131, 132, 133, 134, 135, 136, + 137, 138, 139, 140, 141, 142, + 146, 147, 148, 149, 150, 151, 152, + 153, 154, 155, 156, 157, 158, + 162, 163, 164, 165, 166, 167, 168, + 169, 170, 171, 172, 173, 174, + 178, 179, 180, 181, 182, 183, 184, + 185, 186, 187, 188, 189, 190, + 194, 195, 196, 197, 198, 199, 200, + 201, 202, 203, 204, 205, 206, + 210, 211, 212, 213, 214, 215, 216, + 217, 218, 219, 220, 221, 222, + 226, 227, 228, 229, 230, 231, 232, + 233, 234, 235, 236, 237, 238, + 242, 243, 244, 245, 246, 247, 248, + 249, 250, 251, 252, 253, 254 + }, + .oobfree = { + {.offset = 15, .length = 3}, + {.offset = 31, .length = 3}, + {.offset = 47, .length = 3}, + {.offset = 63, .length = 3}, + {.offset = 79, .length = 3}, + {.offset = 95, .length = 3}, + {.offset = 111, .length = 3}, + {.offset = 127, .length = 3}, + {.offset = 143, .length = 3}, + {.offset = 159, .length = 3}, + {.offset = 175, .length = 3}, + {.offset = 191, .length = 3}, + {.offset = 207, .length = 3}, + {.offset = 223, .length = 3}, + {.offset = 239, .length = 3}, + {.offset = 255, .length = 1} + } +}; + +/* + * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes + * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118 + * bytes are free for use. + */ +static struct nand_ecclayout fsmc_ecc4_224_layout = { + .eccbytes = 104, + .eccpos = { 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 14, + 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, + 34, 35, 36, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, + 50, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, + 66, 67, 68, 69, 70, 71, 72, + 73, 74, 75, 76, 77, 78, + 82, 83, 84, 85, 86, 87, 88, + 89, 90, 91, 92, 93, 94, + 98, 99, 100, 101, 102, 103, 104, + 105, 106, 107, 108, 109, 110, + 114, 115, 116, 117, 118, 119, 120, + 121, 122, 123, 124, 125, 126 + }, + .oobfree = { + {.offset = 15, .length = 3}, + {.offset = 31, .length = 3}, + {.offset = 47, .length = 3}, + {.offset = 63, .length = 3}, + {.offset = 79, .length = 3}, + {.offset = 95, .length = 3}, + {.offset = 111, .length = 3}, + {.offset = 127, .length = 97} + } +}; + +/* + * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes + * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22 + * bytes are free for use. + */ +static struct nand_ecclayout fsmc_ecc4_128_layout = { .eccbytes = 104, .eccpos = { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, @@ -82,6 +207,45 @@ static struct nand_ecclayout fsmc_ecc4_lp_layout = { }; /* + * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of + * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10 + * bytes are free for use. + */ +static struct nand_ecclayout fsmc_ecc4_64_layout = { + .eccbytes = 52, + .eccpos = { 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 14, + 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, + 34, 35, 36, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, + 50, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, + }, + .oobfree = { + {.offset = 15, .length = 3}, + {.offset = 31, .length = 3}, + {.offset = 47, .length = 3}, + {.offset = 63, .length = 1}, + } +}; + +/* + * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of + * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One + * byte is free for use. + */ +static struct nand_ecclayout fsmc_ecc4_16_layout = { + .eccbytes = 13, + .eccpos = { 0, 1, 2, 3, 6, 7, 8, + 9, 10, 11, 12, 13, 14 + }, + .oobfree = { + {.offset = 15, .length = 1}, + } +}; + +/* * ECC placement definitions in oobfree type format. * There are 13 bytes of ecc for every 512 byte block and it has to be read * consecutively and immediately after the 512 byte data block for hardware to @@ -103,16 +267,6 @@ static struct fsmc_eccplace fsmc_ecc4_lp_place = { } }; -static struct nand_ecclayout fsmc_ecc4_sp_layout = { - .eccbytes = 13, - .eccpos = { 0, 1, 2, 3, 6, 7, 8, - 9, 10, 11, 12, 13, 14 - }, - .oobfree = { - {.offset = 15, .length = 1}, - } -}; - static struct fsmc_eccplace fsmc_ecc4_sp_place = { .eccplace = { {.offset = 0, .length = 4}, @@ -120,75 +274,24 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = { } }; -/* - * Default partition tables to be used if the partition information not - * provided through platform data. - * - * Default partition layout for small page(= 512 bytes) devices - * Size for "Root file system" is updated in driver based on actual device size - */ -static struct mtd_partition partition_info_16KB_blk[] = { - { - .name = "X-loader", - .offset = 0, - .size = 4*0x4000, - }, - { - .name = "U-Boot", - .offset = 0x10000, - .size = 20*0x4000, - }, - { - .name = "Kernel", - .offset = 0x60000, - .size = 256*0x4000, - }, - { - .name = "Root File System", - .offset = 0x460000, - .size = MTDPART_SIZ_FULL, - }, -}; - -/* - * Default partition layout for large page(> 512 bytes) devices - * Size for "Root file system" is updated in driver based on actual device size - */ -static struct mtd_partition partition_info_128KB_blk[] = { - { - .name = "X-loader", - .offset = 0, - .size = 4*0x20000, - }, - { - .name = "U-Boot", - .offset = 0x80000, - .size = 12*0x20000, - }, - { - .name = "Kernel", - .offset = 0x200000, - .size = 48*0x20000, - }, - { - .name = "Root File System", - .offset = 0x800000, - .size = MTDPART_SIZ_FULL, - }, -}; - - /** * struct fsmc_nand_data - structure for FSMC NAND device state * * @pid: Part ID on the AMBA PrimeCell format * @mtd: MTD info for a NAND flash. * @nand: Chip related info for a NAND flash. + * @partitions: Partition info for a NAND Flash. + * @nr_partitions: Total number of partition of a NAND flash. * * @ecc_place: ECC placing locations in oobfree type format. * @bank: Bank number for probed device. * @clk: Clock structure for FSMC. * + * @read_dma_chan: DMA channel for read access + * @write_dma_chan: DMA channel for write access to NAND + * @dma_access_complete: Completion structure + * + * @data_pa: NAND Physical port for Data. * @data_va: NAND port for Data. * @cmd_va: NAND port for Command. * @addr_va: NAND port for Address. @@ -198,16 +301,23 @@ struct fsmc_nand_data { u32 pid; struct mtd_info mtd; struct nand_chip nand; + struct mtd_partition *partitions; + unsigned int nr_partitions; struct fsmc_eccplace *ecc_place; unsigned int bank; + struct device *dev; + enum access_mode mode; struct clk *clk; - struct resource *resregs; - struct resource *rescmd; - struct resource *resaddr; - struct resource *resdata; + /* DMA related objects */ + struct dma_chan *read_dma_chan; + struct dma_chan *write_dma_chan; + struct completion dma_access_complete; + + struct fsmc_nand_timings *dev_timings; + dma_addr_t data_pa; void __iomem *data_va; void __iomem *cmd_va; void __iomem *addr_va; @@ -251,28 +361,29 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) struct nand_chip *this = mtd->priv; struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void *__iomem *regs = host->regs_va; unsigned int bank = host->bank; if (ctrl & NAND_CTRL_CHANGE) { + u32 pc; + if (ctrl & NAND_CLE) { - this->IO_ADDR_R = (void __iomem *)host->cmd_va; - this->IO_ADDR_W = (void __iomem *)host->cmd_va; + this->IO_ADDR_R = host->cmd_va; + this->IO_ADDR_W = host->cmd_va; } else if (ctrl & NAND_ALE) { - this->IO_ADDR_R = (void __iomem *)host->addr_va; - this->IO_ADDR_W = (void __iomem *)host->addr_va; + this->IO_ADDR_R = host->addr_va; + this->IO_ADDR_W = host->addr_va; } else { - this->IO_ADDR_R = (void __iomem *)host->data_va; - this->IO_ADDR_W = (void __iomem *)host->data_va; + this->IO_ADDR_R = host->data_va; + this->IO_ADDR_W = host->data_va; } - if (ctrl & NAND_NCE) { - writel(readl(®s->bank_regs[bank].pc) | FSMC_ENABLE, - ®s->bank_regs[bank].pc); - } else { - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ENABLE, - ®s->bank_regs[bank].pc); - } + pc = readl(FSMC_NAND_REG(regs, bank, PC)); + if (ctrl & NAND_NCE) + pc |= FSMC_ENABLE; + else + pc &= ~FSMC_ENABLE; + writel(pc, FSMC_NAND_REG(regs, bank, PC)); } mb(); @@ -287,22 +398,42 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) * This routine initializes timing parameters related to NAND memory access in * FSMC registers */ -static void __init fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank, - uint32_t busw) +static void fsmc_nand_setup(void __iomem *regs, uint32_t bank, + uint32_t busw, struct fsmc_nand_timings *timings) { uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON; + uint32_t tclr, tar, thiz, thold, twait, tset; + struct fsmc_nand_timings *tims; + struct fsmc_nand_timings default_timings = { + .tclr = FSMC_TCLR_1, + .tar = FSMC_TAR_1, + .thiz = FSMC_THIZ_1, + .thold = FSMC_THOLD_4, + .twait = FSMC_TWAIT_6, + .tset = FSMC_TSET_0, + }; + + if (timings) + tims = timings; + else + tims = &default_timings; + + tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT; + tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT; + thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT; + thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT; + twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT; + tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT; if (busw) - writel(value | FSMC_DEVWID_16, ®s->bank_regs[bank].pc); + writel(value | FSMC_DEVWID_16, FSMC_NAND_REG(regs, bank, PC)); else - writel(value | FSMC_DEVWID_8, ®s->bank_regs[bank].pc); - - writel(readl(®s->bank_regs[bank].pc) | FSMC_TCLR_1 | FSMC_TAR_1, - ®s->bank_regs[bank].pc); - writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0, - ®s->bank_regs[bank].comm); - writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0, - ®s->bank_regs[bank].attrib); + writel(value | FSMC_DEVWID_8, FSMC_NAND_REG(regs, bank, PC)); + + writel(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar, + FSMC_NAND_REG(regs, bank, PC)); + writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, COMM)); + writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, ATTRIB)); } /* @@ -312,15 +443,15 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode) { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ECCPLEN_256, - ®s->bank_regs[bank].pc); - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ECCEN, - ®s->bank_regs[bank].pc); - writel(readl(®s->bank_regs[bank].pc) | FSMC_ECCEN, - ®s->bank_regs[bank].pc); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256, + FSMC_NAND_REG(regs, bank, PC)); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN, + FSMC_NAND_REG(regs, bank, PC)); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN, + FSMC_NAND_REG(regs, bank, PC)); } /* @@ -333,37 +464,42 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; uint32_t ecc_tmp; unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT; do { - if (readl(®s->bank_regs[bank].sts) & FSMC_CODE_RDY) + if (readl(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY) break; else cond_resched(); } while (!time_after_eq(jiffies, deadline)); - ecc_tmp = readl(®s->bank_regs[bank].ecc1); + if (time_after_eq(jiffies, deadline)) { + dev_err(host->dev, "calculate ecc timed out\n"); + return -ETIMEDOUT; + } + + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1)); ecc[0] = (uint8_t) (ecc_tmp >> 0); ecc[1] = (uint8_t) (ecc_tmp >> 8); ecc[2] = (uint8_t) (ecc_tmp >> 16); ecc[3] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].ecc2); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC2)); ecc[4] = (uint8_t) (ecc_tmp >> 0); ecc[5] = (uint8_t) (ecc_tmp >> 8); ecc[6] = (uint8_t) (ecc_tmp >> 16); ecc[7] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].ecc3); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC3)); ecc[8] = (uint8_t) (ecc_tmp >> 0); ecc[9] = (uint8_t) (ecc_tmp >> 8); ecc[10] = (uint8_t) (ecc_tmp >> 16); ecc[11] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].sts); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, STS)); ecc[12] = (uint8_t) (ecc_tmp >> 16); return 0; @@ -379,11 +515,11 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; uint32_t ecc_tmp; - ecc_tmp = readl(®s->bank_regs[bank].ecc1); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1)); ecc[0] = (uint8_t) (ecc_tmp >> 0); ecc[1] = (uint8_t) (ecc_tmp >> 8); ecc[2] = (uint8_t) (ecc_tmp >> 16); @@ -391,6 +527,166 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, return 0; } +/* Count the number of 0's in buff upto a max of max_bits */ +static int count_written_bits(uint8_t *buff, int size, int max_bits) +{ + int k, written_bits = 0; + + for (k = 0; k < size; k++) { + written_bits += hweight8(~buff[k]); + if (written_bits > max_bits) + break; + } + + return written_bits; +} + +static void dma_complete(void *param) +{ + struct fsmc_nand_data *host = param; + + complete(&host->dma_access_complete); +} + +static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len, + enum dma_data_direction direction) +{ + struct dma_chan *chan; + struct dma_device *dma_dev; + struct dma_async_tx_descriptor *tx; + dma_addr_t dma_dst, dma_src, dma_addr; + dma_cookie_t cookie; + unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; + int ret; + + if (direction == DMA_TO_DEVICE) + chan = host->write_dma_chan; + else if (direction == DMA_FROM_DEVICE) + chan = host->read_dma_chan; + else + return -EINVAL; + + dma_dev = chan->device; + dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction); + + if (direction == DMA_TO_DEVICE) { + dma_src = dma_addr; + dma_dst = host->data_pa; + flags |= DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_SKIP_DEST_UNMAP; + } else { + dma_src = host->data_pa; + dma_dst = dma_addr; + flags |= DMA_COMPL_DEST_UNMAP_SINGLE | DMA_COMPL_SKIP_SRC_UNMAP; + } + + tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src, + len, flags); + + if (!tx) { + dev_err(host->dev, "device_prep_dma_memcpy error\n"); + dma_unmap_single(dma_dev->dev, dma_addr, len, direction); + return -EIO; + } + + tx->callback = dma_complete; + tx->callback_param = host; + cookie = tx->tx_submit(tx); + + ret = dma_submit_error(cookie); + if (ret) { + dev_err(host->dev, "dma_submit_error %d\n", cookie); + return ret; + } + + dma_async_issue_pending(chan); + + ret = + wait_for_completion_interruptible_timeout(&host->dma_access_complete, + msecs_to_jiffies(3000)); + if (ret <= 0) { + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dev_err(host->dev, "wait_for_completion_timeout\n"); + return ret ? ret : -ETIMEDOUT; + } + + return 0; +} + +/* + * fsmc_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + struct nand_chip *chip = mtd->priv; + + if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) && + IS_ALIGNED(len, sizeof(uint32_t))) { + uint32_t *p = (uint32_t *)buf; + len = len >> 2; + for (i = 0; i < len; i++) + writel(p[i], chip->IO_ADDR_W); + } else { + for (i = 0; i < len; i++) + writeb(buf[i], chip->IO_ADDR_W); + } +} + +/* + * fsmc_read_buf - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + struct nand_chip *chip = mtd->priv; + + if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) && + IS_ALIGNED(len, sizeof(uint32_t))) { + uint32_t *p = (uint32_t *)buf; + len = len >> 2; + for (i = 0; i < len; i++) + p[i] = readl(chip->IO_ADDR_R); + } else { + for (i = 0; i < len; i++) + buf[i] = readb(chip->IO_ADDR_R); + } +} + +/* + * fsmc_read_buf_dma - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct fsmc_nand_data *host; + + host = container_of(mtd, struct fsmc_nand_data, mtd); + dma_xfer(host, buf, len, DMA_FROM_DEVICE); +} + +/* + * fsmc_write_buf_dma - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + struct fsmc_nand_data *host; + + host = container_of(mtd, struct fsmc_nand_data, mtd); + dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE); +} + /* * fsmc_read_page_hwecc * @mtd: mtd info structure @@ -426,7 +722,6 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *oob = (uint8_t *)&ecc_oob[0]; for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) { - chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page); chip->ecc.hwctl(mtd, NAND_ECC_READ); chip->read_buf(mtd, p, eccsize); @@ -437,17 +732,19 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, group++; /* - * length is intentionally kept a higher multiple of 2 - * to read at least 13 bytes even in case of 16 bit NAND - * devices - */ - len = roundup(len, 2); + * length is intentionally kept a higher multiple of 2 + * to read at least 13 bytes even in case of 16 bit NAND + * devices + */ + if (chip->options & NAND_BUSWIDTH_16) + len = roundup(len, 2); + chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page); chip->read_buf(mtd, oob + j, len); j += len; } - memcpy(&ecc_code[i], oob, 13); + memcpy(&ecc_code[i], oob, chip->ecc.bytes); chip->ecc.calculate(mtd, p, &ecc_calc[i]); stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); @@ -461,7 +758,7 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, } /* - * fsmc_correct_data + * fsmc_bch8_correct_data * @mtd: mtd info structure * @dat: buffer of read data * @read_ecc: ecc read from device spare area @@ -470,19 +767,51 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * calc_ecc is a 104 bit information containing maximum of 8 error * offset informations of 13 bits each in 512 bytes of read data. */ -static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat, +static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + struct nand_chip *chip = mtd->priv; + void __iomem *regs = host->regs_va; unsigned int bank = host->bank; - uint16_t err_idx[8]; - uint64_t ecc_data[2]; + uint32_t err_idx[8]; uint32_t num_err, i; + uint32_t ecc1, ecc2, ecc3, ecc4; + + num_err = (readl(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF; + + /* no bit flipping */ + if (likely(num_err == 0)) + return 0; + + /* too many errors */ + if (unlikely(num_err > 8)) { + /* + * This is a temporary erase check. A newly erased page read + * would result in an ecc error because the oob data is also + * erased to FF and the calculated ecc for an FF data is not + * FF..FF. + * This is a workaround to skip performing correction in case + * data is FF..FF + * + * Logic: + * For every page, each bit written as 0 is counted until these + * number of bits are greater than 8 (the maximum correction + * capability of FSMC for each 512 + 13 bytes) + */ + + int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8); + int bits_data = count_written_bits(dat, chip->ecc.size, 8); + + if ((bits_ecc + bits_data) <= 8) { + if (bits_data) + memset(dat, 0xff, chip->ecc.size); + return bits_data; + } - /* The calculated ecc is actually the correction index in data */ - memcpy(ecc_data, calc_ecc, 13); + return -EBADMSG; + } /* * ------------------- calc_ecc[] bit wise -----------|--13 bits--| @@ -493,27 +822,26 @@ static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat, * uint64_t array and error offset indexes are populated in err_idx * array */ - for (i = 0; i < 8; i++) { - if (i == 4) { - err_idx[4] = ((ecc_data[1] & 0x1) << 12) | ecc_data[0]; - ecc_data[1] >>= 1; - continue; - } - err_idx[i] = (ecc_data[i/4] & 0x1FFF); - ecc_data[i/4] >>= 13; - } - - num_err = (readl(®s->bank_regs[bank].sts) >> 10) & 0xF; - - if (num_err == 0xF) - return -EBADMSG; + ecc1 = readl(FSMC_NAND_REG(regs, bank, ECC1)); + ecc2 = readl(FSMC_NAND_REG(regs, bank, ECC2)); + ecc3 = readl(FSMC_NAND_REG(regs, bank, ECC3)); + ecc4 = readl(FSMC_NAND_REG(regs, bank, STS)); + + err_idx[0] = (ecc1 >> 0) & 0x1FFF; + err_idx[1] = (ecc1 >> 13) & 0x1FFF; + err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F); + err_idx[3] = (ecc2 >> 7) & 0x1FFF; + err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF); + err_idx[5] = (ecc3 >> 1) & 0x1FFF; + err_idx[6] = (ecc3 >> 14) & 0x1FFF; + err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F); i = 0; while (num_err--) { change_bit(0, (unsigned long *)&err_idx[i]); change_bit(1, (unsigned long *)&err_idx[i]); - if (err_idx[i] <= 512 * 8) { + if (err_idx[i] < chip->ecc.size * 8) { change_bit(err_idx[i], (unsigned long *)dat); i++; } @@ -521,6 +849,44 @@ static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat, return i; } +static bool filter(struct dma_chan *chan, void *slave) +{ + chan->private = slave; + return true; +} + +#ifdef CONFIG_OF +static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + u32 val; + + /* Set default NAND width to 8 bits */ + pdata->width = 8; + if (!of_property_read_u32(np, "bank-width", &val)) { + if (val == 2) { + pdata->width = 16; + } else if (val != 1) { + dev_err(&pdev->dev, "invalid bank-width %u\n", val); + return -EINVAL; + } + } + of_property_read_u32(np, "st,ale-off", &pdata->ale_off); + of_property_read_u32(np, "st,cle-off", &pdata->cle_off); + if (of_get_property(np, "nand-skip-bbtscan", NULL)) + pdata->options = NAND_SKIP_BBTSCAN; + + return 0; +} +#else +static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + return -ENOSYS; +} +#endif + /* * fsmc_nand_probe - Probe function * @pdev: platform device structure @@ -528,102 +894,109 @@ static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat, static int __init fsmc_nand_probe(struct platform_device *pdev) { struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node __maybe_unused *np = pdev->dev.of_node; + struct mtd_part_parser_data ppdata = {}; struct fsmc_nand_data *host; struct mtd_info *mtd; struct nand_chip *nand; - struct fsmc_regs *regs; struct resource *res; + dma_cap_mask_t mask; int ret = 0; u32 pid; int i; + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + pdev->dev.platform_data = pdata; + ret = fsmc_nand_probe_config_dt(pdev, np); + if (ret) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENODEV; + } + } + if (!pdata) { dev_err(&pdev->dev, "platform data is NULL\n"); return -EINVAL; } /* Allocate memory for the device structure (and zero it) */ - host = kzalloc(sizeof(*host), GFP_KERNEL); + host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); if (!host) { dev_err(&pdev->dev, "failed to allocate device structure\n"); return -ENOMEM; } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); - if (!res) { - ret = -EIO; - goto err_probe1; - } + if (!res) + return -EINVAL; - host->resdata = request_mem_region(res->start, resource_size(res), - pdev->name); - if (!host->resdata) { - ret = -EIO; - goto err_probe1; + if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) { + dev_err(&pdev->dev, "Failed to get memory data resourse\n"); + return -ENOENT; } - host->data_va = ioremap(res->start, resource_size(res)); + host->data_pa = (dma_addr_t)res->start; + host->data_va = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (!host->data_va) { - ret = -EIO; - goto err_probe1; + dev_err(&pdev->dev, "data ioremap failed\n"); + return -ENOMEM; } - host->resaddr = request_mem_region(res->start + PLAT_NAND_ALE, - resource_size(res), pdev->name); - if (!host->resaddr) { - ret = -EIO; - goto err_probe1; + if (!devm_request_mem_region(&pdev->dev, res->start + pdata->ale_off, + resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "Failed to get memory ale resourse\n"); + return -ENOENT; } - host->addr_va = ioremap(res->start + PLAT_NAND_ALE, resource_size(res)); + host->addr_va = devm_ioremap(&pdev->dev, res->start + pdata->ale_off, + resource_size(res)); if (!host->addr_va) { - ret = -EIO; - goto err_probe1; + dev_err(&pdev->dev, "ale ioremap failed\n"); + return -ENOMEM; } - host->rescmd = request_mem_region(res->start + PLAT_NAND_CLE, - resource_size(res), pdev->name); - if (!host->rescmd) { - ret = -EIO; - goto err_probe1; + if (!devm_request_mem_region(&pdev->dev, res->start + pdata->cle_off, + resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "Failed to get memory cle resourse\n"); + return -ENOENT; } - host->cmd_va = ioremap(res->start + PLAT_NAND_CLE, resource_size(res)); + host->cmd_va = devm_ioremap(&pdev->dev, res->start + pdata->cle_off, + resource_size(res)); if (!host->cmd_va) { - ret = -EIO; - goto err_probe1; + dev_err(&pdev->dev, "ale ioremap failed\n"); + return -ENOMEM; } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs"); - if (!res) { - ret = -EIO; - goto err_probe1; - } + if (!res) + return -EINVAL; - host->resregs = request_mem_region(res->start, resource_size(res), - pdev->name); - if (!host->resregs) { - ret = -EIO; - goto err_probe1; + if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) { + dev_err(&pdev->dev, "Failed to get memory regs resourse\n"); + return -ENOENT; } - host->regs_va = ioremap(res->start, resource_size(res)); + host->regs_va = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (!host->regs_va) { - ret = -EIO; - goto err_probe1; + dev_err(&pdev->dev, "regs ioremap failed\n"); + return -ENOMEM; } host->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "failed to fetch block clock\n"); - ret = PTR_ERR(host->clk); - host->clk = NULL; - goto err_probe1; + return PTR_ERR(host->clk); } ret = clk_enable(host->clk); if (ret) - goto err_probe1; + goto err_clk_enable; /* * This device ID is actually a common AMBA ID as used on the @@ -639,7 +1012,14 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) host->bank = pdata->bank; host->select_chip = pdata->select_bank; - regs = host->regs_va; + host->partitions = pdata->partitions; + host->nr_partitions = pdata->nr_partitions; + host->dev = &pdev->dev; + host->dev_timings = pdata->nand_timings; + host->mode = pdata->mode; + + if (host->mode == USE_DMA_ACCESS) + init_completion(&host->dma_access_complete); /* Link all private pointers */ mtd = &host->mtd; @@ -658,21 +1038,53 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) nand->ecc.size = 512; nand->options = pdata->options; nand->select_chip = fsmc_select_chip; + nand->badblockbits = 7; if (pdata->width == FSMC_NAND_BW16) nand->options |= NAND_BUSWIDTH_16; - fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16); + switch (host->mode) { + case USE_DMA_ACCESS: + dma_cap_zero(mask); + dma_cap_set(DMA_MEMCPY, mask); + host->read_dma_chan = dma_request_channel(mask, filter, + pdata->read_dma_priv); + if (!host->read_dma_chan) { + dev_err(&pdev->dev, "Unable to get read dma channel\n"); + goto err_req_read_chnl; + } + host->write_dma_chan = dma_request_channel(mask, filter, + pdata->write_dma_priv); + if (!host->write_dma_chan) { + dev_err(&pdev->dev, "Unable to get write dma channel\n"); + goto err_req_write_chnl; + } + nand->read_buf = fsmc_read_buf_dma; + nand->write_buf = fsmc_write_buf_dma; + break; + + default: + case USE_WORD_ACCESS: + nand->read_buf = fsmc_read_buf; + nand->write_buf = fsmc_write_buf; + break; + } + + fsmc_nand_setup(host->regs_va, host->bank, + nand->options & NAND_BUSWIDTH_16, + host->dev_timings); if (AMBA_REV_BITS(host->pid) >= 8) { nand->ecc.read_page = fsmc_read_page_hwecc; nand->ecc.calculate = fsmc_read_hwecc_ecc4; - nand->ecc.correct = fsmc_correct_data; + nand->ecc.correct = fsmc_bch8_correct_data; nand->ecc.bytes = 13; + nand->ecc.strength = 8; } else { nand->ecc.calculate = fsmc_read_hwecc_ecc1; nand->ecc.correct = nand_correct_data; nand->ecc.bytes = 3; + nand->ecc.strength = 1; } /* @@ -681,19 +1093,52 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (nand_scan_ident(&host->mtd, 1, NULL)) { ret = -ENXIO; dev_err(&pdev->dev, "No NAND Device found!\n"); - goto err_probe; + goto err_scan_ident; } if (AMBA_REV_BITS(host->pid) >= 8) { - if (host->mtd.writesize == 512) { - nand->ecc.layout = &fsmc_ecc4_sp_layout; + switch (host->mtd.oobsize) { + case 16: + nand->ecc.layout = &fsmc_ecc4_16_layout; host->ecc_place = &fsmc_ecc4_sp_place; - } else { - nand->ecc.layout = &fsmc_ecc4_lp_layout; + break; + case 64: + nand->ecc.layout = &fsmc_ecc4_64_layout; + host->ecc_place = &fsmc_ecc4_lp_place; + break; + case 128: + nand->ecc.layout = &fsmc_ecc4_128_layout; + host->ecc_place = &fsmc_ecc4_lp_place; + break; + case 224: + nand->ecc.layout = &fsmc_ecc4_224_layout; host->ecc_place = &fsmc_ecc4_lp_place; + break; + case 256: + nand->ecc.layout = &fsmc_ecc4_256_layout; + host->ecc_place = &fsmc_ecc4_lp_place; + break; + default: + printk(KERN_WARNING "No oob scheme defined for " + "oobsize %d\n", mtd->oobsize); + BUG(); } } else { - nand->ecc.layout = &fsmc_ecc1_layout; + switch (host->mtd.oobsize) { + case 16: + nand->ecc.layout = &fsmc_ecc1_16_layout; + break; + case 64: + nand->ecc.layout = &fsmc_ecc1_64_layout; + break; + case 128: + nand->ecc.layout = &fsmc_ecc1_128_layout; + break; + default: + printk(KERN_WARNING "No oob scheme defined for " + "oobsize %d\n", mtd->oobsize); + BUG(); + } } /* Second stage of scan to fill MTD data-structures */ @@ -713,13 +1158,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) * Check for partition info passed */ host->mtd.name = "nand"; - ret = mtd_device_parse_register(&host->mtd, NULL, 0, - host->mtd.size <= 0x04000000 ? - partition_info_16KB_blk : - partition_info_128KB_blk, - host->mtd.size <= 0x04000000 ? - ARRAY_SIZE(partition_info_16KB_blk) : - ARRAY_SIZE(partition_info_128KB_blk)); + ppdata.of_node = np; + ret = mtd_device_parse_register(&host->mtd, NULL, &ppdata, + host->partitions, host->nr_partitions); if (ret) goto err_probe; @@ -728,32 +1169,16 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) return 0; err_probe: +err_scan_ident: + if (host->mode == USE_DMA_ACCESS) + dma_release_channel(host->write_dma_chan); +err_req_write_chnl: + if (host->mode == USE_DMA_ACCESS) + dma_release_channel(host->read_dma_chan); +err_req_read_chnl: clk_disable(host->clk); -err_probe1: - if (host->clk) - clk_put(host->clk); - if (host->regs_va) - iounmap(host->regs_va); - if (host->resregs) - release_mem_region(host->resregs->start, - resource_size(host->resregs)); - if (host->cmd_va) - iounmap(host->cmd_va); - if (host->rescmd) - release_mem_region(host->rescmd->start, - resource_size(host->rescmd)); - if (host->addr_va) - iounmap(host->addr_va); - if (host->resaddr) - release_mem_region(host->resaddr->start, - resource_size(host->resaddr)); - if (host->data_va) - iounmap(host->data_va); - if (host->resdata) - release_mem_region(host->resdata->start, - resource_size(host->resdata)); - - kfree(host); +err_clk_enable: + clk_put(host->clk); return ret; } @@ -768,24 +1193,15 @@ static int fsmc_nand_remove(struct platform_device *pdev) if (host) { nand_release(&host->mtd); + + if (host->mode == USE_DMA_ACCESS) { + dma_release_channel(host->write_dma_chan); + dma_release_channel(host->read_dma_chan); + } clk_disable(host->clk); clk_put(host->clk); - - iounmap(host->regs_va); - release_mem_region(host->resregs->start, - resource_size(host->resregs)); - iounmap(host->cmd_va); - release_mem_region(host->rescmd->start, - resource_size(host->rescmd)); - iounmap(host->addr_va); - release_mem_region(host->resaddr->start, - resource_size(host->resaddr)); - iounmap(host->data_va); - release_mem_region(host->resdata->start, - resource_size(host->resdata)); - - kfree(host); } + return 0; } @@ -801,15 +1217,24 @@ static int fsmc_nand_suspend(struct device *dev) static int fsmc_nand_resume(struct device *dev) { struct fsmc_nand_data *host = dev_get_drvdata(dev); - if (host) + if (host) { clk_enable(host->clk); + fsmc_nand_setup(host->regs_va, host->bank, + host->nand.options & NAND_BUSWIDTH_16, + host->dev_timings); + } return 0; } -static const struct dev_pm_ops fsmc_nand_pm_ops = { - .suspend = fsmc_nand_suspend, - .resume = fsmc_nand_resume, +static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id fsmc_nand_id_table[] = { + { .compatible = "st,spear600-fsmc-nand" }, + {} }; +MODULE_DEVICE_TABLE(of, fsmc_nand_id_table); #endif static struct platform_driver fsmc_nand_driver = { @@ -817,6 +1242,7 @@ static struct platform_driver fsmc_nand_driver = { .driver = { .owner = THIS_MODULE, .name = "fsmc-nand", + .of_match_table = of_match_ptr(fsmc_nand_id_table), #ifdef CONFIG_PM .pm = &fsmc_nand_pm_ops, #endif diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 590dd5cceed6..e8ea7107932e 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -848,7 +848,10 @@ int gpmi_send_command(struct gpmi_nand_data *this) sg_init_one(sgl, this->cmd_buffer, this->command_length); dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE); - desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_MEM_TO_DEV, 1); + desc = dmaengine_prep_slave_sg(channel, + sgl, 1, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { pr_err("step 2 error\n"); return -1; @@ -889,7 +892,8 @@ int gpmi_send_data(struct gpmi_nand_data *this) /* [2] send DMA request */ prepare_data_dma(this, DMA_TO_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_MEM_TO_DEV, 1); + 1, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -925,7 +929,8 @@ int gpmi_read_data(struct gpmi_nand_data *this) /* [2] : send DMA request */ prepare_data_dma(this, DMA_FROM_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_DEV_TO_MEM, 1); + 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -970,8 +975,10 @@ int gpmi_send_page(struct gpmi_nand_data *this, pio[4] = payload; pio[5] = auxiliary; - desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); + desc = dmaengine_prep_slave_sg(channel, + (struct scatterlist *)pio, + ARRAY_SIZE(pio), DMA_TRANS_NONE, + DMA_CTRL_ACK); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -1035,7 +1042,8 @@ int gpmi_read_page(struct gpmi_nand_data *this, pio[5] = auxiliary; desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, 1); + ARRAY_SIZE(pio), DMA_TRANS_NONE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -1052,9 +1060,11 @@ int gpmi_read_page(struct gpmi_nand_data *this, | BF_GPMI_CTRL0_ADDRESS(address) | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size); pio[1] = 0; + pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */ desc = dmaengine_prep_slave_sg(channel, - (struct scatterlist *)pio, 2, - DMA_TRANS_NONE, 1); + (struct scatterlist *)pio, 3, + DMA_TRANS_NONE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("step 3 error\n"); return -1; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 493ec2fcf97f..75b1dde16358 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1124,7 +1124,7 @@ static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ - if (chip->options & NAND_BBT_USE_FLASH) + if (chip->bbt_options & NAND_BBT_USE_FLASH) ret = nand_update_bbt(mtd, ofs); else { chipnr = (int)(ofs >> chip->chip_shift); @@ -1155,7 +1155,7 @@ static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs) return ret; } -static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this) +static int nand_boot_set_geometry(struct gpmi_nand_data *this) { struct boot_rom_geometry *geometry = &this->rom_geometry; @@ -1182,7 +1182,7 @@ static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this) } static const char *fingerprint = "STMP"; -static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this) +static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) { struct boot_rom_geometry *rom_geo = &this->rom_geometry; struct device *dev = this->dev; @@ -1239,7 +1239,7 @@ static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this) } /* Writes a transcription stamp. */ -static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this) +static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) { struct device *dev = this->dev; struct boot_rom_geometry *rom_geo = &this->rom_geometry; @@ -1322,7 +1322,7 @@ static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this) return 0; } -static int __devinit mx23_boot_init(struct gpmi_nand_data *this) +static int mx23_boot_init(struct gpmi_nand_data *this) { struct device *dev = this->dev; struct nand_chip *chip = &this->nand; @@ -1391,7 +1391,7 @@ static int __devinit mx23_boot_init(struct gpmi_nand_data *this) return 0; } -static int __devinit nand_boot_init(struct gpmi_nand_data *this) +static int nand_boot_init(struct gpmi_nand_data *this) { nand_boot_set_geometry(this); @@ -1401,7 +1401,7 @@ static int __devinit nand_boot_init(struct gpmi_nand_data *this) return 0; } -static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this) +static int gpmi_set_geometry(struct gpmi_nand_data *this) { int ret; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index e023bccb7781..ec6180d4ff8f 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -20,7 +20,7 @@ #include <linux/mtd/nand.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/dma.h> +#include <linux/fsl/mxs-dma.h> struct resources { void *gpmi_regs; diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c index 5dc6f0d92f1a..11e487813428 100644 --- a/drivers/mtd/nand/h1910.c +++ b/drivers/mtd/nand/h1910.c @@ -135,8 +135,8 @@ static int __init h1910_init(void) } /* Register the partitions */ - mtd_device_parse_register(h1910_nand_mtd, NULL, 0, - partition_info, NUM_PARTITIONS); + mtd_device_parse_register(h1910_nand_mtd, NULL, NULL, partition_info, + NUM_PARTITIONS); /* Return happy */ return 0; diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index ac3b9f255e00..e4147e8acb7c 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -332,6 +332,11 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) chip->ecc.mode = NAND_ECC_HW_OOB_FIRST; chip->ecc.size = 512; chip->ecc.bytes = 9; + chip->ecc.strength = 2; + /* + * FIXME: ecc_strength value of 2 bits per 512 bytes of data is a + * conservative guess, given 9 ecc bytes and reed-solomon alg. + */ if (pdata) chip->ecc.layout = pdata->ecc_layout; @@ -367,9 +372,9 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) goto err_gpio_free; } - ret = mtd_device_parse_register(mtd, NULL, 0, - pdata ? pdata->partitions : NULL, - pdata ? pdata->num_partitions : 0); + ret = mtd_device_parse_register(mtd, NULL, NULL, + pdata ? pdata->partitions : NULL, + pdata ? pdata->num_partitions : 0); if (ret) { dev_err(&pdev->dev, "Failed to add mtd device\n"); diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 74a43b818d0e..cc0678a967c1 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1225,9 +1225,16 @@ static int __init mxcnd_probe(struct platform_device *pdev) goto escan; } + if (this->ecc.mode == NAND_ECC_HW) { + if (nfc_is_v1()) + this->ecc.strength = 1; + else + this->ecc.strength = (host->eccsize == 4) ? 4 : 8; + } + /* Register the partitions */ - mtd_device_parse_register(mtd, part_probes, 0, - pdata->parts, pdata->nr_parts); + mtd_device_parse_register(mtd, part_probes, NULL, pdata->parts, + pdata->nr_parts); platform_set_drvdata(pdev, host); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 8a393f9e6027..47b19c0bb070 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -123,12 +123,6 @@ static int check_offs_len(struct mtd_info *mtd, ret = -EINVAL; } - /* Do not allow past end of device */ - if (ofs + len > mtd->size) { - pr_debug("%s: past end of device\n", __func__); - ret = -EINVAL; - } - return ret; } @@ -338,7 +332,7 @@ static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) */ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) { - int page, chipnr, res = 0; + int page, chipnr, res = 0, i = 0; struct nand_chip *chip = mtd->priv; u16 bad; @@ -356,23 +350,29 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) chip->select_chip(mtd, chipnr); } - if (chip->options & NAND_BUSWIDTH_16) { - chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE, - page); - bad = cpu_to_le16(chip->read_word(mtd)); - if (chip->badblockpos & 0x1) - bad >>= 8; - else - bad &= 0xFF; - } else { - chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page); - bad = chip->read_byte(mtd); - } + do { + if (chip->options & NAND_BUSWIDTH_16) { + chip->cmdfunc(mtd, NAND_CMD_READOOB, + chip->badblockpos & 0xFE, page); + bad = cpu_to_le16(chip->read_word(mtd)); + if (chip->badblockpos & 0x1) + bad >>= 8; + else + bad &= 0xFF; + } else { + chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, + page); + bad = chip->read_byte(mtd); + } - if (likely(chip->badblockbits == 8)) - res = bad != 0xFF; - else - res = hweight8(bad) < chip->badblockbits; + if (likely(chip->badblockbits == 8)) + res = bad != 0xFF; + else + res = hweight8(bad) < chip->badblockbits; + ofs += mtd->writesize; + page = (int)(ofs >> chip->page_shift) & chip->pagemask; + i++; + } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE)); if (getchip) nand_release_device(mtd); @@ -386,51 +386,79 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) * @ofs: offset from device start * * This is the default implementation, which can be overridden by a hardware - * specific driver. + * specific driver. We try operations in the following order, according to our + * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH): + * (1) erase the affected block, to allow OOB marker to be written cleanly + * (2) update in-memory BBT + * (3) write bad block marker to OOB area of affected block + * (4) update flash-based BBT + * Note that we retain the first error encountered in (3) or (4), finish the + * procedures, and dump the error in the end. */ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd->priv; uint8_t buf[2] = { 0, 0 }; - int block, ret, i = 0; + int block, res, ret = 0, i = 0; + int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM); - if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) - ofs += mtd->erasesize - mtd->writesize; + if (write_oob) { + struct erase_info einfo; + + /* Attempt erase before marking OOB */ + memset(&einfo, 0, sizeof(einfo)); + einfo.mtd = mtd; + einfo.addr = ofs; + einfo.len = 1 << chip->phys_erase_shift; + nand_erase_nand(mtd, &einfo, 0); + } /* Get block number */ block = (int)(ofs >> chip->bbt_erase_shift); + /* Mark block bad in memory-based BBT */ if (chip->bbt) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); - /* Do we have a flash based bad block table? */ - if (chip->bbt_options & NAND_BBT_USE_FLASH) - ret = nand_update_bbt(mtd, ofs); - else { + /* Write bad block marker to OOB */ + if (write_oob) { struct mtd_oob_ops ops; + loff_t wr_ofs = ofs; nand_get_device(chip, mtd, FL_WRITING); - /* - * Write to first two pages if necessary. If we write to more - * than one location, the first error encountered quits the - * procedure. We write two bytes per location, so we dont have - * to mess with 16 bit access. - */ - ops.len = ops.ooblen = 2; ops.datbuf = NULL; ops.oobbuf = buf; - ops.ooboffs = chip->badblockpos & ~0x01; + ops.ooboffs = chip->badblockpos; + if (chip->options & NAND_BUSWIDTH_16) { + ops.ooboffs &= ~0x01; + ops.len = ops.ooblen = 2; + } else { + ops.len = ops.ooblen = 1; + } ops.mode = MTD_OPS_PLACE_OOB; + + /* Write to first/last page(s) if necessary */ + if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) + wr_ofs += mtd->erasesize - mtd->writesize; do { - ret = nand_do_write_oob(mtd, ofs, &ops); + res = nand_do_write_oob(mtd, wr_ofs, &ops); + if (!ret) + ret = res; i++; - ofs += mtd->writesize; - } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && - i < 2); + wr_ofs += mtd->writesize; + } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2); nand_release_device(mtd); } + + /* Update flash-based bad block table */ + if (chip->bbt_options & NAND_BBT_USE_FLASH) { + res = nand_update_bbt(mtd, ofs); + if (!ret) + ret = res; + } + if (!ret) mtd->ecc_stats.badblocks++; @@ -1586,25 +1614,14 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, struct mtd_oob_ops ops; int ret; - /* Do not allow reads past end of device */ - if ((from + len) > mtd->size) - return -EINVAL; - if (!len) - return 0; - nand_get_device(chip, mtd, FL_READING); - ops.len = len; ops.datbuf = buf; ops.oobbuf = NULL; ops.mode = 0; - ret = nand_do_read_ops(mtd, from, &ops); - *retlen = ops.retlen; - nand_release_device(mtd); - return ret; } @@ -2293,12 +2310,6 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, struct mtd_oob_ops ops; int ret; - /* Do not allow reads past end of device */ - if ((to + len) > mtd->size) - return -EINVAL; - if (!len) - return 0; - /* Wait for the device to get ready */ panic_nand_wait(mtd, chip, 400); @@ -2333,25 +2344,14 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, struct mtd_oob_ops ops; int ret; - /* Do not allow reads past end of device */ - if ((to + len) > mtd->size) - return -EINVAL; - if (!len) - return 0; - nand_get_device(chip, mtd, FL_WRITING); - ops.len = len; ops.datbuf = (uint8_t *)buf; ops.oobbuf = NULL; ops.mode = 0; - ret = nand_do_write_ops(mtd, to, &ops); - *retlen = ops.retlen; - nand_release_device(mtd); - return ret; } @@ -2550,8 +2550,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, if (check_offs_len(mtd, instr->addr, instr->len)) return -EINVAL; - instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; - /* Grab the lock and see if the device is available */ nand_get_device(chip, mtd, FL_ERASING); @@ -2715,10 +2713,6 @@ static void nand_sync(struct mtd_info *mtd) */ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) { - /* Check for invalid offset */ - if (offs > mtd->size) - return -EINVAL; - return nand_block_checkbad(mtd, offs, 1, 0); } @@ -2857,7 +2851,6 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') return 0; - pr_info("ONFI flash detected\n"); chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); for (i = 0; i < 3; i++) { chip->read_buf(mtd, (uint8_t *)p, sizeof(*p)); @@ -2898,7 +2891,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, mtd->writesize = le32_to_cpu(p->byte_per_page); mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize; mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); - chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize; + chip->chipsize = le32_to_cpu(p->blocks_per_lun); + chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; *busw = 0; if (le16_to_cpu(p->features) & 1) *busw = NAND_BUSWIDTH_16; @@ -2907,6 +2901,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, chip->options |= (NAND_NO_READRDY | NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK; + pr_info("ONFI flash detected\n"); return 1; } @@ -3238,6 +3233,10 @@ int nand_scan_tail(struct mtd_info *mtd) int i; struct nand_chip *chip = mtd->priv; + /* New bad blocks should be marked in OOB, flash-based BBT, or both */ + BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && + !(chip->bbt_options & NAND_BBT_USE_FLASH)); + if (!(chip->options & NAND_OWN_BUFFERS)) chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL); if (!chip->buffers) @@ -3350,6 +3349,7 @@ int nand_scan_tail(struct mtd_info *mtd) if (!chip->ecc.size) chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; break; case NAND_ECC_SOFT_BCH: @@ -3384,6 +3384,8 @@ int nand_scan_tail(struct mtd_info *mtd) pr_warn("BCH ECC initialization failed!\n"); BUG(); } + chip->ecc.strength = + chip->ecc.bytes*8 / fls(8*chip->ecc.size); break; case NAND_ECC_NONE: @@ -3397,6 +3399,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.write_oob = nand_write_oob_std; chip->ecc.size = mtd->writesize; chip->ecc.bytes = 0; + chip->ecc.strength = 0; break; default: @@ -3461,25 +3464,26 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : MTD_CAP_NANDFLASH; - mtd->erase = nand_erase; - mtd->point = NULL; - mtd->unpoint = NULL; - mtd->read = nand_read; - mtd->write = nand_write; - mtd->panic_write = panic_nand_write; - mtd->read_oob = nand_read_oob; - mtd->write_oob = nand_write_oob; - mtd->sync = nand_sync; - mtd->lock = NULL; - mtd->unlock = NULL; - mtd->suspend = nand_suspend; - mtd->resume = nand_resume; - mtd->block_isbad = nand_block_isbad; - mtd->block_markbad = nand_block_markbad; + mtd->_erase = nand_erase; + mtd->_point = NULL; + mtd->_unpoint = NULL; + mtd->_read = nand_read; + mtd->_write = nand_write; + mtd->_panic_write = panic_nand_write; + mtd->_read_oob = nand_read_oob; + mtd->_write_oob = nand_write_oob; + mtd->_sync = nand_sync; + mtd->_lock = NULL; + mtd->_unlock = NULL; + mtd->_suspend = nand_suspend; + mtd->_resume = nand_resume; + mtd->_block_isbad = nand_block_isbad; + mtd->_block_markbad = nand_block_markbad; mtd->writebufsize = mtd->writesize; - /* propagate ecc.layout to mtd_info */ + /* propagate ecc info to mtd_info */ mtd->ecclayout = chip->ecc.layout; + mtd->ecc_strength = chip->ecc.strength * chip->ecc.steps; /* Check, if we should skip the bad block table scan */ if (chip->options & NAND_SKIP_BBTSCAN) diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index ec688548c880..2b6f632cf274 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -179,6 +179,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc, chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; chip->priv = ndfc; ndfc->mtd.priv = chip; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index b3a883e2a22f..c2b0bba9d8b3 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1058,6 +1058,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) { info->nand.ecc.bytes = 3; info->nand.ecc.size = 512; + info->nand.ecc.strength = 1; info->nand.ecc.calculate = omap_calculate_ecc; info->nand.ecc.hwctl = omap_enable_hwecc; info->nand.ecc.correct = omap_correct_data; @@ -1101,8 +1102,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } - mtd_device_parse_register(&info->mtd, NULL, 0, - pdata->parts, pdata->nr_parts); + mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts, + pdata->nr_parts); platform_set_drvdata(pdev, &info->mtd); diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 29f505adaf84..1d3bfb26080c 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -129,8 +129,8 @@ static int __init orion_nand_probe(struct platform_device *pdev) } mtd->name = "orion_nand"; - ret = mtd_device_parse_register(mtd, NULL, 0, - board->parts, board->nr_parts); + ret = mtd_device_parse_register(mtd, NULL, NULL, board->parts, + board->nr_parts); if (ret) { nand_release(mtd); goto no_dev; diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 7f2da6953357..6404e6e81b10 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -99,8 +99,9 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) } err = mtd_device_parse_register(&data->mtd, - pdata->chip.part_probe_types, 0, - pdata->chip.partitions, pdata->chip.nr_partitions); + pdata->chip.part_probe_types, NULL, + pdata->chip.partitions, + pdata->chip.nr_partitions); if (!err) return err; diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c index 7e52af51a198..0ddd90e5788f 100644 --- a/drivers/mtd/nand/ppchameleonevb.c +++ b/drivers/mtd/nand/ppchameleonevb.c @@ -275,11 +275,10 @@ static int __init ppchameleonevb_init(void) ppchameleon_mtd->name = "ppchameleon-nand"; /* Register the partitions */ - mtd_device_parse_register(ppchameleon_mtd, NULL, 0, - ppchameleon_mtd->size == NAND_SMALL_SIZE ? - partition_info_me : - partition_info_hi, - NUM_PARTITIONS); + mtd_device_parse_register(ppchameleon_mtd, NULL, NULL, + ppchameleon_mtd->size == NAND_SMALL_SIZE ? + partition_info_me : partition_info_hi, + NUM_PARTITIONS); nand_evb_init: /**************************** @@ -365,11 +364,10 @@ static int __init ppchameleonevb_init(void) ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME; /* Register the partitions */ - mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0, - ppchameleon_mtd->size == NAND_SMALL_SIZE ? - partition_info_me : - partition_info_hi, - NUM_PARTITIONS); + mtd_device_parse_register(ppchameleonevb_mtd, NULL, NULL, + ppchameleon_mtd->size == NAND_SMALL_SIZE ? + partition_info_me : partition_info_hi, + NUM_PARTITIONS); /* Return happy */ return 0; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 5c3d719c37e6..def50caa6f84 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1002,6 +1002,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) KEEP_CONFIG: chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = host->page_size; + chip->ecc.strength = 1; chip->options = NAND_NO_AUTOINCR; chip->options |= NAND_NO_READRDY; @@ -1228,8 +1229,9 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) continue; } - ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0, - pdata->parts[cs], pdata->nr_parts[cs]); + ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, + NULL, pdata->parts[cs], + pdata->nr_parts[cs]); if (!ret) probe_success = 1; } diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 769a4e096b3c..c2040187c813 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -891,6 +891,7 @@ int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) chip->ecc.mode = NAND_ECC_HW_SYNDROME; chip->ecc.size = R852_DMA_LEN; chip->ecc.bytes = SM_OOB_SIZE; + chip->ecc.strength = 2; chip->ecc.hwctl = r852_ecc_hwctl; chip->ecc.calculate = r852_ecc_calculate; chip->ecc.correct = r852_ecc_correct; diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c index f309addc2fa0..e55b5cfbe145 100644 --- a/drivers/mtd/nand/rtc_from4.c +++ b/drivers/mtd/nand/rtc_from4.c @@ -527,6 +527,7 @@ static int __init rtc_from4_init(void) this->ecc.mode = NAND_ECC_HW_SYNDROME; this->ecc.size = 512; this->ecc.bytes = 8; + this->ecc.strength = 3; /* return the status of extra status and ECC checks */ this->errstat = rtc_from4_errstat; /* set the nand_oobinfo to support FPGA H/W error detection */ diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 868685db6712..91121f33f743 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -751,8 +751,8 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, if (set) mtd->mtd.name = set->name; - return mtd_device_parse_register(&mtd->mtd, NULL, 0, - set->partitions, set->nr_partitions); + return mtd_device_parse_register(&mtd->mtd, NULL, NULL, + set->partitions, set->nr_partitions); } /** @@ -823,6 +823,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, chip->ecc.calculate = s3c2410_nand_calculate_ecc; chip->ecc.correct = s3c2410_nand_correct_data; chip->ecc.mode = NAND_ECC_HW; + chip->ecc.strength = 1; switch (info->cpu_type) { case TYPE_S3C2410: diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 93b1f74321c2..e9b2b260de3a 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -26,6 +26,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/mtd/mtd.h> @@ -283,7 +284,7 @@ static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset) static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val) { struct sh_flctl *flctl = mtd_to_flctl(mtd); - uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT; + uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT; uint32_t flcmdcr_val, addr_len_bytes = 0; /* Set SNAND bit if page size is 2048byte */ @@ -303,6 +304,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va break; case NAND_CMD_READ0: case NAND_CMD_READOOB: + case NAND_CMD_RNDOUT: addr_len_bytes = flctl->rw_ADRCNT; flcmdcr_val |= CDSRC_E; if (flctl->chip.options & NAND_BUSWIDTH_16) @@ -320,6 +322,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va break; case NAND_CMD_READID: flcmncr_val &= ~SNAND_E; + flcmdcr_val |= CDSRC_E; addr_len_bytes = ADRCNT_1; break; case NAND_CMD_STATUS: @@ -513,6 +516,8 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, struct sh_flctl *flctl = mtd_to_flctl(mtd); uint32_t read_cmd = 0; + pm_runtime_get_sync(&flctl->pdev->dev); + flctl->read_bytes = 0; if (command != NAND_CMD_PAGEPROG) flctl->index = 0; @@ -525,7 +530,6 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, execmd_read_page_sector(mtd, page_addr); break; } - empty_fifo(flctl); if (flctl->page_size) set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8) | command); @@ -547,7 +551,6 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, break; } - empty_fifo(flctl); if (flctl->page_size) { set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8) | NAND_CMD_READ0); @@ -559,15 +562,35 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, flctl->read_bytes = mtd->oobsize; goto read_normal_exit; + case NAND_CMD_RNDOUT: + if (flctl->hwecc) + break; + + if (flctl->page_size) + set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8) + | command); + else + set_cmd_regs(mtd, command, command); + + set_addr(mtd, column, 0); + + flctl->read_bytes = mtd->writesize + mtd->oobsize - column; + goto read_normal_exit; + case NAND_CMD_READID: - empty_fifo(flctl); set_cmd_regs(mtd, command, command); - set_addr(mtd, 0, 0); - flctl->read_bytes = 4; + /* READID is always performed using an 8-bit bus */ + if (flctl->chip.options & NAND_BUSWIDTH_16) + column <<= 1; + set_addr(mtd, column, 0); + + flctl->read_bytes = 8; writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */ + empty_fifo(flctl); start_translation(flctl); - read_datareg(flctl, 0); /* read and end */ + read_fiforeg(flctl, flctl->read_bytes, 0); + wait_completion(flctl); break; case NAND_CMD_ERASE1: @@ -650,29 +673,55 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, default: break; } - return; + goto runtime_exit; read_normal_exit: writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */ + empty_fifo(flctl); start_translation(flctl); read_fiforeg(flctl, flctl->read_bytes, 0); wait_completion(flctl); +runtime_exit: + pm_runtime_put_sync(&flctl->pdev->dev); return; } static void flctl_select_chip(struct mtd_info *mtd, int chipnr) { struct sh_flctl *flctl = mtd_to_flctl(mtd); - uint32_t flcmncr_val = readl(FLCMNCR(flctl)); + int ret; switch (chipnr) { case -1: - flcmncr_val &= ~CE0_ENABLE; - writel(flcmncr_val, FLCMNCR(flctl)); + flctl->flcmncr_base &= ~CE0_ENABLE; + + pm_runtime_get_sync(&flctl->pdev->dev); + writel(flctl->flcmncr_base, FLCMNCR(flctl)); + + if (flctl->qos_request) { + dev_pm_qos_remove_request(&flctl->pm_qos); + flctl->qos_request = 0; + } + + pm_runtime_put_sync(&flctl->pdev->dev); break; case 0: - flcmncr_val |= CE0_ENABLE; - writel(flcmncr_val, FLCMNCR(flctl)); + flctl->flcmncr_base |= CE0_ENABLE; + + if (!flctl->qos_request) { + ret = dev_pm_qos_add_request(&flctl->pdev->dev, + &flctl->pm_qos, 100); + if (ret < 0) + dev_err(&flctl->pdev->dev, + "PM QoS request failed: %d\n", ret); + flctl->qos_request = 1; + } + + if (flctl->holden) { + pm_runtime_get_sync(&flctl->pdev->dev); + writel(HOLDEN, FLHOLDCR(flctl)); + pm_runtime_put_sync(&flctl->pdev->dev); + } break; default: BUG(); @@ -730,11 +779,6 @@ static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) return 0; } -static void flctl_register_init(struct sh_flctl *flctl, unsigned long val) -{ - writel(val, FLCMNCR(flctl)); -} - static int flctl_chip_init_tail(struct mtd_info *mtd) { struct sh_flctl *flctl = mtd_to_flctl(mtd); @@ -781,13 +825,13 @@ static int flctl_chip_init_tail(struct mtd_info *mtd) chip->ecc.size = 512; chip->ecc.bytes = 10; + chip->ecc.strength = 4; chip->ecc.read_page = flctl_read_page_hwecc; chip->ecc.write_page = flctl_write_page_hwecc; chip->ecc.mode = NAND_ECC_HW; /* 4 symbols ECC enabled */ - writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02, - FLCMNCR(flctl)); + flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02; } else { chip->ecc.mode = NAND_ECC_SOFT; } @@ -819,13 +863,13 @@ static int __devinit flctl_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "failed to get I/O memory\n"); - goto err; + goto err_iomap; } flctl->reg = ioremap(res->start, resource_size(res)); if (flctl->reg == NULL) { dev_err(&pdev->dev, "failed to remap I/O memory\n"); - goto err; + goto err_iomap; } platform_set_drvdata(pdev, flctl); @@ -833,9 +877,9 @@ static int __devinit flctl_probe(struct platform_device *pdev) nand = &flctl->chip; flctl_mtd->priv = nand; flctl->pdev = pdev; + flctl->flcmncr_base = pdata->flcmncr_val; flctl->hwecc = pdata->has_hwecc; - - flctl_register_init(flctl, pdata->flcmncr_val); + flctl->holden = pdata->use_holden; nand->options = NAND_NO_AUTOINCR; @@ -855,23 +899,28 @@ static int __devinit flctl_probe(struct platform_device *pdev) nand->read_word = flctl_read_word; } + pm_runtime_enable(&pdev->dev); + pm_runtime_resume(&pdev->dev); + ret = nand_scan_ident(flctl_mtd, 1, NULL); if (ret) - goto err; + goto err_chip; ret = flctl_chip_init_tail(flctl_mtd); if (ret) - goto err; + goto err_chip; ret = nand_scan_tail(flctl_mtd); if (ret) - goto err; + goto err_chip; mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts); return 0; -err: +err_chip: + pm_runtime_disable(&pdev->dev); +err_iomap: kfree(flctl); return ret; } @@ -881,6 +930,7 @@ static int __devexit flctl_remove(struct platform_device *pdev) struct sh_flctl *flctl = platform_get_drvdata(pdev); nand_release(&flctl->mtd); + pm_runtime_disable(&pdev->dev); kfree(flctl); return 0; diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index b175c0fd8b93..3421e3762a5a 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -167,6 +167,7 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) this->ecc.mode = NAND_ECC_HW; this->ecc.size = 256; this->ecc.bytes = 3; + this->ecc.strength = 1; this->badblock_pattern = data->badblock_pattern; this->ecc.layout = data->ecc_layout; this->ecc.hwctl = sharpsl_nand_enable_hwecc; @@ -181,8 +182,8 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) /* Register the partitions */ sharpsl->mtd.name = "sharpsl-nand"; - err = mtd_device_parse_register(&sharpsl->mtd, NULL, 0, - data->partitions, data->nr_partitions); + err = mtd_device_parse_register(&sharpsl->mtd, NULL, NULL, + data->partitions, data->nr_partitions); if (err) goto err_add; diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 6caa0cd9d6a7..5aa518081c51 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -430,6 +430,7 @@ static int tmio_probe(struct platform_device *dev) nand_chip->ecc.mode = NAND_ECC_HW; nand_chip->ecc.size = 512; nand_chip->ecc.bytes = 6; + nand_chip->ecc.strength = 2; nand_chip->ecc.hwctl = tmio_nand_enable_hwecc; nand_chip->ecc.calculate = tmio_nand_calculate_ecc; nand_chip->ecc.correct = tmio_nand_correct_data; @@ -456,9 +457,9 @@ static int tmio_probe(struct platform_device *dev) goto err_scan; } /* Register the partitions */ - retval = mtd_device_parse_register(mtd, NULL, 0, - data ? data->partition : NULL, - data ? data->num_partitions : 0); + retval = mtd_device_parse_register(mtd, NULL, NULL, + data ? data->partition : NULL, + data ? data->num_partitions : 0); if (!retval) return retval; diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index c7c4f1d11c77..26398dcf21cf 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -356,6 +356,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */ chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; chip->chip_delay = 100; chip->controller = &drvdata->hw_control; @@ -386,7 +387,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) } mtd->name = txx9_priv->mtdname; - mtd_device_parse_register(mtd, NULL, 0, NULL, 0); + mtd_device_parse_register(mtd, NULL, NULL, NULL, 0); drvdata->mtds[i] = mtd; } diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index a75382aff5f6..c5f4ebf4b384 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -56,13 +56,6 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) if (memcmp(mtd->name, "DiskOnChip", 10)) return; - if (!mtd_can_have_bb(mtd)) { - printk(KERN_ERR -"NFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n" -"Please use the new diskonchip driver under the NAND subsystem.\n"); - return; - } - pr_debug("NFTL: add_mtd for %s\n", mtd->name); nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL); diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 0ccd5bff2544..1c4f97c63e62 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -70,9 +70,9 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev) goto out_iounmap; } - err = mtd_device_parse_register(&info->mtd, NULL, 0, - pdata ? pdata->parts : NULL, - pdata ? pdata->nr_parts : 0); + err = mtd_device_parse_register(&info->mtd, NULL, NULL, + pdata ? pdata->parts : NULL, + pdata ? pdata->nr_parts : 0); platform_set_drvdata(pdev, info); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 7e9ea6852b67..398a82783848 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -751,9 +751,9 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) if ((r = onenand_scan(&c->mtd, 1)) < 0) goto err_release_regulator; - r = mtd_device_parse_register(&c->mtd, NULL, 0, - pdata ? pdata->parts : NULL, - pdata ? pdata->nr_parts : 0); + r = mtd_device_parse_register(&c->mtd, NULL, NULL, + pdata ? pdata->parts : NULL, + pdata ? pdata->nr_parts : 0); if (r) goto err_release_onenand; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index a061bc163da2..b3ce12ef359e 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1753,16 +1753,6 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to, (int)len); - /* Initialize retlen, in case of early exit */ - *retlen = 0; - - /* Do not allow writes past end of device */ - if (unlikely((to + len) > mtd->size)) { - printk(KERN_ERR "%s: Attempt write to past end of device\n", - __func__); - return -EINVAL; - } - /* Reject writes, which are not page aligned */ if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) { printk(KERN_ERR "%s: Attempt to write not page aligned data\n", @@ -1890,13 +1880,6 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, ops->retlen = 0; ops->oobretlen = 0; - /* Do not allow writes past end of device */ - if (unlikely((to + len) > mtd->size)) { - printk(KERN_ERR "%s: Attempt write to past end of device\n", - __func__); - return -EINVAL; - } - /* Reject writes, which are not page aligned */ if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) { printk(KERN_ERR "%s: Attempt to write not page aligned data\n", @@ -2493,12 +2476,6 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) (unsigned long long)instr->addr, (unsigned long long)instr->len); - /* Do not allow erase past end of device */ - if (unlikely((len + addr) > mtd->size)) { - printk(KERN_ERR "%s: Erase past end of device\n", __func__); - return -EINVAL; - } - if (FLEXONENAND(this)) { /* Find the eraseregion of this address */ int i = flexonenand_region(mtd, addr); @@ -2525,8 +2502,6 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) return -EINVAL; } - instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; - /* Grab the lock and see if the device is available */ onenand_get_device(mtd, FL_ERASING); @@ -4103,33 +4078,34 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) mtd->oobavail = this->ecclayout->oobavail; mtd->ecclayout = this->ecclayout; + mtd->ecc_strength = 1; /* Fill in remaining MTD driver data */ mtd->type = ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH : MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->erase = onenand_erase; - mtd->point = NULL; - mtd->unpoint = NULL; - mtd->read = onenand_read; - mtd->write = onenand_write; - mtd->read_oob = onenand_read_oob; - mtd->write_oob = onenand_write_oob; - mtd->panic_write = onenand_panic_write; + mtd->_erase = onenand_erase; + mtd->_point = NULL; + mtd->_unpoint = NULL; + mtd->_read = onenand_read; + mtd->_write = onenand_write; + mtd->_read_oob = onenand_read_oob; + mtd->_write_oob = onenand_write_oob; + mtd->_panic_write = onenand_panic_write; #ifdef CONFIG_MTD_ONENAND_OTP - mtd->get_fact_prot_info = onenand_get_fact_prot_info; - mtd->read_fact_prot_reg = onenand_read_fact_prot_reg; - mtd->get_user_prot_info = onenand_get_user_prot_info; - mtd->read_user_prot_reg = onenand_read_user_prot_reg; - mtd->write_user_prot_reg = onenand_write_user_prot_reg; - mtd->lock_user_prot_reg = onenand_lock_user_prot_reg; + mtd->_get_fact_prot_info = onenand_get_fact_prot_info; + mtd->_read_fact_prot_reg = onenand_read_fact_prot_reg; + mtd->_get_user_prot_info = onenand_get_user_prot_info; + mtd->_read_user_prot_reg = onenand_read_user_prot_reg; + mtd->_write_user_prot_reg = onenand_write_user_prot_reg; + mtd->_lock_user_prot_reg = onenand_lock_user_prot_reg; #endif - mtd->sync = onenand_sync; - mtd->lock = onenand_lock; - mtd->unlock = onenand_unlock; - mtd->suspend = onenand_suspend; - mtd->resume = onenand_resume; - mtd->block_isbad = onenand_block_isbad; - mtd->block_markbad = onenand_block_markbad; + mtd->_sync = onenand_sync; + mtd->_lock = onenand_lock; + mtd->_unlock = onenand_unlock; + mtd->_suspend = onenand_suspend; + mtd->_resume = onenand_resume; + mtd->_block_isbad = onenand_block_isbad; + mtd->_block_markbad = onenand_block_markbad; mtd->owner = THIS_MODULE; mtd->writebufsize = mtd->writesize; diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index fa1ee43f735b..8e4b3f2742ba 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -923,7 +923,7 @@ static int s3c_onenand_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!r) { dev_err(&pdev->dev, "no buffer memory resource defined\n"); - return -ENOENT; + err = -ENOENT; goto ahb_resource_failed; } @@ -964,7 +964,7 @@ static int s3c_onenand_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!r) { dev_err(&pdev->dev, "no dma memory resource defined\n"); - return -ENOENT; + err = -ENOENT; goto dma_resource_failed; } @@ -1014,7 +1014,7 @@ static int s3c_onenand_probe(struct platform_device *pdev) if (s3c_read_reg(MEM_CFG_OFFSET) & ONENAND_SYS_CFG1_SYNC_READ) dev_info(&onenand->pdev->dev, "OneNAND Sync. Burst Read enabled\n"); - err = mtd_device_parse_register(mtd, NULL, 0, + err = mtd_device_parse_register(mtd, NULL, NULL, pdata ? pdata->parts : NULL, pdata ? pdata->nr_parts : 0); diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 48970c14beff..580035c803d6 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -78,8 +78,7 @@ static int parse_redboot_partitions(struct mtd_info *master, if ( directory < 0 ) { offset = master->size + directory * master->erasesize; - while (mtd_can_have_bb(master) && - mtd_block_isbad(master, offset)) { + while (mtd_block_isbad(master, offset)) { if (!offset) { nogood: printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); @@ -89,8 +88,7 @@ static int parse_redboot_partitions(struct mtd_info *master, } } else { offset = directory * master->erasesize; - while (mtd_can_have_bb(master) && - mtd_block_isbad(master, offset)) { + while (mtd_block_isbad(master, offset)) { offset += master->erasesize; if (offset == master->size) goto nogood; diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c index 072ed5970e2f..9e2dfd517aa5 100644 --- a/drivers/mtd/sm_ftl.c +++ b/drivers/mtd/sm_ftl.c @@ -1256,7 +1256,7 @@ static void sm_remove_dev(struct mtd_blktrans_dev *dev) static struct mtd_blktrans_ops sm_ftl_ops = { .name = "smblk", - .major = -1, + .major = 0, .part_bits = SM_FTL_PARTN_BITS, .blksize = SM_SECTOR_SIZE, .getgeo = sm_getgeo, diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c index e2cdebf40840..61af9bb560ab 100644 --- a/drivers/mtd/ubi/debug.c +++ b/drivers/mtd/ubi/debug.c @@ -386,19 +386,11 @@ out: return count; } -static int default_open(struct inode *inode, struct file *file) -{ - if (inode->i_private) - file->private_data = inode->i_private; - - return 0; -} - /* File operations for all UBI debugfs files */ static const struct file_operations dfs_fops = { .read = dfs_file_read, .write = dfs_file_write, - .open = default_open, + .open = simple_open, .llseek = no_llseek, .owner = THIS_MODULE, }; diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 941bc3c05d6e..90b98822d9a4 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -174,11 +174,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, int err = 0, lnum, offs, total_read; struct gluebi_device *gluebi; - if (len < 0 || from < 0 || from + len > mtd->size) - return -EINVAL; - gluebi = container_of(mtd, struct gluebi_device, mtd); - lnum = div_u64_rem(from, mtd->erasesize, &offs); total_read = len; while (total_read) { @@ -218,14 +214,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, int err = 0, lnum, offs, total_written; struct gluebi_device *gluebi; - if (len < 0 || to < 0 || len + to > mtd->size) - return -EINVAL; - gluebi = container_of(mtd, struct gluebi_device, mtd); - - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) @@ -265,21 +254,13 @@ static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr) int err, i, lnum, count; struct gluebi_device *gluebi; - if (instr->addr < 0 || instr->addr > mtd->size - mtd->erasesize) - return -EINVAL; - if (instr->len < 0 || instr->addr + instr->len > mtd->size) - return -EINVAL; if (mtd_mod_by_ws(instr->addr, mtd) || mtd_mod_by_ws(instr->len, mtd)) return -EINVAL; lnum = mtd_div_by_eb(instr->addr, mtd); count = mtd_div_by_eb(instr->len, mtd); - gluebi = container_of(mtd, struct gluebi_device, mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - for (i = 0; i < count - 1; i++) { err = ubi_leb_unmap(gluebi->desc, lnum + i); if (err) @@ -340,11 +321,11 @@ static int gluebi_create(struct ubi_device_info *di, mtd->owner = THIS_MODULE; mtd->writesize = di->min_io_size; mtd->erasesize = vi->usable_leb_size; - mtd->read = gluebi_read; - mtd->write = gluebi_write; - mtd->erase = gluebi_erase; - mtd->get_device = gluebi_get_device; - mtd->put_device = gluebi_put_device; + mtd->_read = gluebi_read; + mtd->_write = gluebi_write; + mtd->_erase = gluebi_erase; + mtd->_get_device = gluebi_get_device; + mtd->_put_device = gluebi_put_device; /* * In case of dynamic a volume, MTD device size is just volume size. In diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 0c76186bb9e7..62d2409bb293 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -891,9 +891,15 @@ static void bond_do_fail_over_mac(struct bonding *bond, switch (bond->params.fail_over_mac) { case BOND_FOM_ACTIVE: - if (new_active) + if (new_active) { memcpy(bond->dev->dev_addr, new_active->dev->dev_addr, new_active->dev->addr_len); + write_unlock_bh(&bond->curr_slave_lock); + read_unlock(&bond->lock); + call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev); + read_lock(&bond->lock); + write_lock_bh(&bond->curr_slave_lock); + } break; case BOND_FOM_FOLLOW: /* @@ -2028,6 +2034,9 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) write_unlock_bh(&bond->lock); unblock_netpoll_tx(); + if (bond->slave_cnt == 0) + call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev); + bond_compute_features(bond); if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) && (old_features & NETIF_F_VLAN_CHALLENGED)) @@ -3001,7 +3010,11 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks) trans_start + delta_in_ticks)) || bond->curr_active_slave != slave) { slave->link = BOND_LINK_UP; - bond->current_arp_slave = NULL; + if (bond->current_arp_slave) { + bond_set_slave_inactive_flags( + bond->current_arp_slave); + bond->current_arp_slave = NULL; + } pr_info("%s: link status definitely up for interface %s.\n", bond->dev->name, slave->dev->name); @@ -3695,17 +3708,52 @@ static void bond_set_multicast_list(struct net_device *bond_dev) read_unlock(&bond->lock); } -static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms) +static int bond_neigh_init(struct neighbour *n) { - struct bonding *bond = netdev_priv(dev); + struct bonding *bond = netdev_priv(n->dev); struct slave *slave = bond->first_slave; + const struct net_device_ops *slave_ops; + struct neigh_parms parms; + int ret; + + if (!slave) + return 0; + + slave_ops = slave->dev->netdev_ops; + + if (!slave_ops->ndo_neigh_setup) + return 0; + + parms.neigh_setup = NULL; + parms.neigh_cleanup = NULL; + ret = slave_ops->ndo_neigh_setup(slave->dev, &parms); + if (ret) + return ret; + + /* + * Assign slave's neigh_cleanup to neighbour in case cleanup is called + * after the last slave has been detached. Assumes that all slaves + * utilize the same neigh_cleanup (true at this writing as only user + * is ipoib). + */ + n->parms->neigh_cleanup = parms.neigh_cleanup; + + if (!parms.neigh_setup) + return 0; + + return parms.neigh_setup(n); +} + +/* + * The bonding ndo_neigh_setup is called at init time beofre any + * slave exists. So we must declare proxy setup function which will + * be used at run time to resolve the actual slave neigh param setup. + */ +static int bond_neigh_setup(struct net_device *dev, + struct neigh_parms *parms) +{ + parms->neigh_setup = bond_neigh_init; - if (slave) { - const struct net_device_ops *slave_ops - = slave->dev->netdev_ops; - if (slave_ops->ndo_neigh_setup) - return slave_ops->ndo_neigh_setup(slave->dev, parms); - } return 0; } diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c index 96391c36fa74..b71ce9bf0afb 100644 --- a/drivers/net/caif/caif_spi.c +++ b/drivers/net/caif/caif_spi.c @@ -127,12 +127,6 @@ static inline void dev_debugfs_rem(struct cfspi *cfspi) debugfs_remove(cfspi->dbgfs_dir); } -static int dbgfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t dbgfs_state(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -243,13 +237,13 @@ static ssize_t dbgfs_frame(struct file *file, char __user *user_buf, } static const struct file_operations dbgfs_state_fops = { - .open = dbgfs_open, + .open = simple_open, .read = dbgfs_state, .owner = THIS_MODULE }; static const struct file_operations dbgfs_frame_fops = { - .open = dbgfs_open, + .open = simple_open, .read = dbgfs_frame, .owner = THIS_MODULE }; diff --git a/drivers/net/eql.c b/drivers/net/eql.c index a59cf961a436..f219d38acf58 100644 --- a/drivers/net/eql.c +++ b/drivers/net/eql.c @@ -125,6 +125,7 @@ #include <linux/if.h> #include <linux/if_arp.h> #include <linux/if_eql.h> +#include <linux/pkt_sched.h> #include <asm/uaccess.h> @@ -143,7 +144,7 @@ static void eql_timer(unsigned long param) equalizer_t *eql = (equalizer_t *) param; struct list_head *this, *tmp, *head; - spin_lock_bh(&eql->queue.lock); + spin_lock(&eql->queue.lock); head = &eql->queue.all_slaves; list_for_each_safe(this, tmp, head) { slave_t *slave = list_entry(this, slave_t, list); @@ -157,7 +158,7 @@ static void eql_timer(unsigned long param) } } - spin_unlock_bh(&eql->queue.lock); + spin_unlock(&eql->queue.lock); eql->timer.expires = jiffies + EQL_DEFAULT_RESCHED_IVAL; add_timer(&eql->timer); @@ -341,7 +342,7 @@ static netdev_tx_t eql_slave_xmit(struct sk_buff *skb, struct net_device *dev) struct net_device *slave_dev = slave->dev; skb->dev = slave_dev; - skb->priority = 1; + skb->priority = TC_PRIO_FILLER; slave->bytes_queued += skb->len; dev_queue_xmit(skb); dev->stats.tx_packets++; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index e37161f19250..2c9ee552dffc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1173,6 +1173,13 @@ enum { }; +struct bnx2x_prev_path_list { + u8 bus; + u8 slot; + u8 path; + struct list_head list; +}; + struct bnx2x { /* Fields used in the tx and intr/napi performance paths * are grouped together in the beginning of the structure diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index f1f3ca65667a..4b054812713a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1721,6 +1721,29 @@ static void bnx2x_squeeze_objects(struct bnx2x *bp) } while (0) #endif +bool bnx2x_test_firmware_version(struct bnx2x *bp, bool is_err) +{ + /* build FW version dword */ + u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) + + (BCM_5710_FW_MINOR_VERSION << 8) + + (BCM_5710_FW_REVISION_VERSION << 16) + + (BCM_5710_FW_ENGINEERING_VERSION << 24); + + /* read loaded FW from chip */ + u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM); + + DP(NETIF_MSG_IFUP, "loaded fw %x, my fw %x\n", loaded_fw, my_fw); + + if (loaded_fw != my_fw) { + if (is_err) + BNX2X_ERR("bnx2x with FW %x was already loaded, which mismatches my %x FW. aborting\n", + loaded_fw, my_fw); + return false; + } + + return true; +} + /* must be called with rtnl_lock */ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) { @@ -1815,23 +1838,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) } if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP && load_code != FW_MSG_CODE_DRV_LOAD_COMMON) { - /* build FW version dword */ - u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) + - (BCM_5710_FW_MINOR_VERSION << 8) + - (BCM_5710_FW_REVISION_VERSION << 16) + - (BCM_5710_FW_ENGINEERING_VERSION << 24); - - /* read loaded FW from chip */ - u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM); - - DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x", - loaded_fw, my_fw); - /* abort nic load if version mismatch */ - if (my_fw != loaded_fw) { - BNX2X_ERR("bnx2x with FW %x already loaded, " - "which mismatches my %x FW. aborting", - loaded_fw, my_fw); + if (!bnx2x_test_firmware_version(bp, true)) { rc = -EBUSY; LOAD_ERROR_EXIT(bp, load_error2); } @@ -1866,7 +1874,6 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) * bnx2x_periodic_task(). */ smp_mb(); - queue_delayed_work(bnx2x_wq, &bp->period_task, 0); } else bp->port.pmf = 0; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 8b163388659a..5c27454d2ec2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -431,6 +431,9 @@ void bnx2x_panic_dump(struct bnx2x *bp); void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl); +/* validate currect fw is loaded */ +bool bnx2x_test_firmware_version(struct bnx2x *bp, bool is_err); + /* dev_close main block */ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h index cd6dfa9eaa3a..b9b263323436 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h @@ -25,31 +25,31 @@ (IRO[149].base + ((funcId) * IRO[149].m1)) #define CSTORM_IGU_MODE_OFFSET (IRO[157].base) #define CSTORM_ISCSI_CQ_SIZE_OFFSET(pfId) \ - (IRO[315].base + ((pfId) * IRO[315].m1)) -#define CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ (IRO[316].base + ((pfId) * IRO[316].m1)) +#define CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ + (IRO[317].base + ((pfId) * IRO[317].m1)) #define CSTORM_ISCSI_EQ_CONS_OFFSET(pfId, iscsiEqId) \ - (IRO[308].base + ((pfId) * IRO[308].m1) + ((iscsiEqId) * IRO[308].m2)) + (IRO[309].base + ((pfId) * IRO[309].m1) + ((iscsiEqId) * IRO[309].m2)) #define CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(pfId, iscsiEqId) \ - (IRO[310].base + ((pfId) * IRO[310].m1) + ((iscsiEqId) * IRO[310].m2)) + (IRO[311].base + ((pfId) * IRO[311].m1) + ((iscsiEqId) * IRO[311].m2)) #define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(pfId, iscsiEqId) \ - (IRO[309].base + ((pfId) * IRO[309].m1) + ((iscsiEqId) * IRO[309].m2)) + (IRO[310].base + ((pfId) * IRO[310].m1) + ((iscsiEqId) * IRO[310].m2)) #define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_VALID_OFFSET(pfId, iscsiEqId) \ - (IRO[311].base + ((pfId) * IRO[311].m1) + ((iscsiEqId) * IRO[311].m2)) + (IRO[312].base + ((pfId) * IRO[312].m1) + ((iscsiEqId) * IRO[312].m2)) #define CSTORM_ISCSI_EQ_PROD_OFFSET(pfId, iscsiEqId) \ - (IRO[307].base + ((pfId) * IRO[307].m1) + ((iscsiEqId) * IRO[307].m2)) + (IRO[308].base + ((pfId) * IRO[308].m1) + ((iscsiEqId) * IRO[308].m2)) #define CSTORM_ISCSI_EQ_SB_INDEX_OFFSET(pfId, iscsiEqId) \ - (IRO[313].base + ((pfId) * IRO[313].m1) + ((iscsiEqId) * IRO[313].m2)) + (IRO[314].base + ((pfId) * IRO[314].m1) + ((iscsiEqId) * IRO[314].m2)) #define CSTORM_ISCSI_EQ_SB_NUM_OFFSET(pfId, iscsiEqId) \ - (IRO[312].base + ((pfId) * IRO[312].m1) + ((iscsiEqId) * IRO[312].m2)) + (IRO[313].base + ((pfId) * IRO[313].m1) + ((iscsiEqId) * IRO[313].m2)) #define CSTORM_ISCSI_HQ_SIZE_OFFSET(pfId) \ - (IRO[314].base + ((pfId) * IRO[314].m1)) + (IRO[315].base + ((pfId) * IRO[315].m1)) #define CSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ - (IRO[306].base + ((pfId) * IRO[306].m1)) + (IRO[307].base + ((pfId) * IRO[307].m1)) #define CSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ - (IRO[305].base + ((pfId) * IRO[305].m1)) + (IRO[306].base + ((pfId) * IRO[306].m1)) #define CSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ - (IRO[304].base + ((pfId) * IRO[304].m1)) + (IRO[305].base + ((pfId) * IRO[305].m1)) #define CSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ (IRO[151].base + ((funcId) * IRO[151].m1)) #define CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(pfId) \ @@ -96,37 +96,37 @@ #define TSTORM_FUNC_EN_OFFSET(funcId) \ (IRO[103].base + ((funcId) * IRO[103].m1)) #define TSTORM_ISCSI_ERROR_BITMAP_OFFSET(pfId) \ - (IRO[271].base + ((pfId) * IRO[271].m1)) -#define TSTORM_ISCSI_L2_ISCSI_OOO_CID_TABLE_OFFSET(pfId) \ (IRO[272].base + ((pfId) * IRO[272].m1)) -#define TSTORM_ISCSI_L2_ISCSI_OOO_CLIENT_ID_TABLE_OFFSET(pfId) \ +#define TSTORM_ISCSI_L2_ISCSI_OOO_CID_TABLE_OFFSET(pfId) \ (IRO[273].base + ((pfId) * IRO[273].m1)) -#define TSTORM_ISCSI_L2_ISCSI_OOO_PROD_OFFSET(pfId) \ +#define TSTORM_ISCSI_L2_ISCSI_OOO_CLIENT_ID_TABLE_OFFSET(pfId) \ (IRO[274].base + ((pfId) * IRO[274].m1)) +#define TSTORM_ISCSI_L2_ISCSI_OOO_PROD_OFFSET(pfId) \ + (IRO[275].base + ((pfId) * IRO[275].m1)) #define TSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ - (IRO[270].base + ((pfId) * IRO[270].m1)) + (IRO[271].base + ((pfId) * IRO[271].m1)) #define TSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ - (IRO[269].base + ((pfId) * IRO[269].m1)) + (IRO[270].base + ((pfId) * IRO[270].m1)) #define TSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ - (IRO[268].base + ((pfId) * IRO[268].m1)) + (IRO[269].base + ((pfId) * IRO[269].m1)) #define TSTORM_ISCSI_RQ_SIZE_OFFSET(pfId) \ - (IRO[267].base + ((pfId) * IRO[267].m1)) + (IRO[268].base + ((pfId) * IRO[268].m1)) #define TSTORM_ISCSI_TCP_LOCAL_ADV_WND_OFFSET(pfId) \ - (IRO[276].base + ((pfId) * IRO[276].m1)) + (IRO[277].base + ((pfId) * IRO[277].m1)) #define TSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(pfId) \ - (IRO[263].base + ((pfId) * IRO[263].m1)) -#define TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ (IRO[264].base + ((pfId) * IRO[264].m1)) -#define TSTORM_ISCSI_TCP_VARS_MID_LOCAL_MAC_ADDR_OFFSET(pfId) \ +#define TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ (IRO[265].base + ((pfId) * IRO[265].m1)) -#define TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ +#define TSTORM_ISCSI_TCP_VARS_MID_LOCAL_MAC_ADDR_OFFSET(pfId) \ (IRO[266].base + ((pfId) * IRO[266].m1)) +#define TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(pfId) \ + (IRO[267].base + ((pfId) * IRO[267].m1)) #define TSTORM_MAC_FILTER_CONFIG_OFFSET(pfId) \ (IRO[202].base + ((pfId) * IRO[202].m1)) #define TSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ (IRO[105].base + ((funcId) * IRO[105].m1)) #define TSTORM_TCP_MAX_CWND_OFFSET(pfId) \ - (IRO[216].base + ((pfId) * IRO[216].m1)) + (IRO[217].base + ((pfId) * IRO[217].m1)) #define TSTORM_VF_TO_PF_OFFSET(funcId) \ (IRO[104].base + ((funcId) * IRO[104].m1)) #define USTORM_AGG_DATA_OFFSET (IRO[206].base) @@ -140,29 +140,29 @@ #define USTORM_ETH_PAUSE_ENABLED_OFFSET(portId) \ (IRO[183].base + ((portId) * IRO[183].m1)) #define USTORM_FCOE_EQ_PROD_OFFSET(pfId) \ - (IRO[317].base + ((pfId) * IRO[317].m1)) + (IRO[318].base + ((pfId) * IRO[318].m1)) #define USTORM_FUNC_EN_OFFSET(funcId) \ (IRO[178].base + ((funcId) * IRO[178].m1)) #define USTORM_ISCSI_CQ_SIZE_OFFSET(pfId) \ - (IRO[281].base + ((pfId) * IRO[281].m1)) -#define USTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ (IRO[282].base + ((pfId) * IRO[282].m1)) +#define USTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \ + (IRO[283].base + ((pfId) * IRO[283].m1)) #define USTORM_ISCSI_ERROR_BITMAP_OFFSET(pfId) \ - (IRO[286].base + ((pfId) * IRO[286].m1)) + (IRO[287].base + ((pfId) * IRO[287].m1)) #define USTORM_ISCSI_GLOBAL_BUF_PHYS_ADDR_OFFSET(pfId) \ - (IRO[283].base + ((pfId) * IRO[283].m1)) + (IRO[284].base + ((pfId) * IRO[284].m1)) #define USTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ - (IRO[279].base + ((pfId) * IRO[279].m1)) + (IRO[280].base + ((pfId) * IRO[280].m1)) #define USTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ - (IRO[278].base + ((pfId) * IRO[278].m1)) + (IRO[279].base + ((pfId) * IRO[279].m1)) #define USTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ - (IRO[277].base + ((pfId) * IRO[277].m1)) + (IRO[278].base + ((pfId) * IRO[278].m1)) #define USTORM_ISCSI_R2TQ_SIZE_OFFSET(pfId) \ - (IRO[280].base + ((pfId) * IRO[280].m1)) + (IRO[281].base + ((pfId) * IRO[281].m1)) #define USTORM_ISCSI_RQ_BUFFER_SIZE_OFFSET(pfId) \ - (IRO[284].base + ((pfId) * IRO[284].m1)) -#define USTORM_ISCSI_RQ_SIZE_OFFSET(pfId) \ (IRO[285].base + ((pfId) * IRO[285].m1)) +#define USTORM_ISCSI_RQ_SIZE_OFFSET(pfId) \ + (IRO[286].base + ((pfId) * IRO[286].m1)) #define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(pfId) \ (IRO[182].base + ((pfId) * IRO[182].m1)) #define USTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ @@ -188,39 +188,39 @@ #define XSTORM_FUNC_EN_OFFSET(funcId) \ (IRO[47].base + ((funcId) * IRO[47].m1)) #define XSTORM_ISCSI_HQ_SIZE_OFFSET(pfId) \ - (IRO[294].base + ((pfId) * IRO[294].m1)) + (IRO[295].base + ((pfId) * IRO[295].m1)) #define XSTORM_ISCSI_LOCAL_MAC_ADDR0_OFFSET(pfId) \ - (IRO[297].base + ((pfId) * IRO[297].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR1_OFFSET(pfId) \ (IRO[298].base + ((pfId) * IRO[298].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR2_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR1_OFFSET(pfId) \ (IRO[299].base + ((pfId) * IRO[299].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR3_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR2_OFFSET(pfId) \ (IRO[300].base + ((pfId) * IRO[300].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR4_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR3_OFFSET(pfId) \ (IRO[301].base + ((pfId) * IRO[301].m1)) -#define XSTORM_ISCSI_LOCAL_MAC_ADDR5_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR4_OFFSET(pfId) \ (IRO[302].base + ((pfId) * IRO[302].m1)) -#define XSTORM_ISCSI_LOCAL_VLAN_OFFSET(pfId) \ +#define XSTORM_ISCSI_LOCAL_MAC_ADDR5_OFFSET(pfId) \ (IRO[303].base + ((pfId) * IRO[303].m1)) +#define XSTORM_ISCSI_LOCAL_VLAN_OFFSET(pfId) \ + (IRO[304].base + ((pfId) * IRO[304].m1)) #define XSTORM_ISCSI_NUM_OF_TASKS_OFFSET(pfId) \ - (IRO[293].base + ((pfId) * IRO[293].m1)) + (IRO[294].base + ((pfId) * IRO[294].m1)) #define XSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(pfId) \ - (IRO[292].base + ((pfId) * IRO[292].m1)) + (IRO[293].base + ((pfId) * IRO[293].m1)) #define XSTORM_ISCSI_PAGE_SIZE_OFFSET(pfId) \ - (IRO[291].base + ((pfId) * IRO[291].m1)) + (IRO[292].base + ((pfId) * IRO[292].m1)) #define XSTORM_ISCSI_R2TQ_SIZE_OFFSET(pfId) \ - (IRO[296].base + ((pfId) * IRO[296].m1)) + (IRO[297].base + ((pfId) * IRO[297].m1)) #define XSTORM_ISCSI_SQ_SIZE_OFFSET(pfId) \ - (IRO[295].base + ((pfId) * IRO[295].m1)) + (IRO[296].base + ((pfId) * IRO[296].m1)) #define XSTORM_ISCSI_TCP_VARS_ADV_WND_SCL_OFFSET(pfId) \ - (IRO[290].base + ((pfId) * IRO[290].m1)) + (IRO[291].base + ((pfId) * IRO[291].m1)) #define XSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(pfId) \ - (IRO[289].base + ((pfId) * IRO[289].m1)) + (IRO[290].base + ((pfId) * IRO[290].m1)) #define XSTORM_ISCSI_TCP_VARS_TOS_OFFSET(pfId) \ - (IRO[288].base + ((pfId) * IRO[288].m1)) + (IRO[289].base + ((pfId) * IRO[289].m1)) #define XSTORM_ISCSI_TCP_VARS_TTL_OFFSET(pfId) \ - (IRO[287].base + ((pfId) * IRO[287].m1)) + (IRO[288].base + ((pfId) * IRO[288].m1)) #define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(pfId) \ (IRO[44].base + ((pfId) * IRO[44].m1)) #define XSTORM_RECORD_SLOW_PATH_OFFSET(funcId) \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 5d71b7d43237..dbff5915b81a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -1251,6 +1251,9 @@ struct drv_func_mb { #define DRV_MSG_CODE_LINK_STATUS_CHANGED 0x01000000 + #define DRV_MSG_CODE_INITIATE_FLR 0x02000000 + #define REQ_BC_VER_4_INITIATE_FLR 0x00070213 + #define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000 #define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000 #define BIOS_MSG_CODE_VIRT_MAC_PRIM 0xff030000 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index beb4cdbdb6e1..ad95324dc042 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -35,7 +35,6 @@ #define ETH_MAX_PACKET_SIZE 1500 #define ETH_MAX_JUMBO_PACKET_SIZE 9600 #define MDIO_ACCESS_TIMEOUT 1000 -#define BMAC_CONTROL_RX_ENABLE 2 #define WC_LANE_MAX 4 #define I2C_SWITCH_WIDTH 2 #define I2C_BSC0 0 @@ -1372,7 +1371,14 @@ static void bnx2x_update_pfc_xmac(struct link_params *params, pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN | XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN | XMAC_PFC_CTRL_HI_REG_RX_PFC_EN | - XMAC_PFC_CTRL_HI_REG_TX_PFC_EN; + XMAC_PFC_CTRL_HI_REG_TX_PFC_EN | + XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON; + /* Write pause and PFC registers */ + REG_WR(bp, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val); + pfc1_val &= ~XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON; + } /* Write pause and PFC registers */ @@ -3649,6 +3655,33 @@ static void bnx2x_ext_phy_update_adv_fc(struct bnx2x_phy *phy, if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) { bnx2x_cl22_read(bp, phy, 0x4, &ld_pause); bnx2x_cl22_read(bp, phy, 0x5, &lp_pause); + } else if (CHIP_IS_E3(bp) && + SINGLE_MEDIA_DIRECT(params)) { + u8 lane = bnx2x_get_warpcore_lane(phy, params); + u16 gp_status, gp_mask; + bnx2x_cl45_read(bp, phy, + MDIO_AN_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_4, + &gp_status); + gp_mask = (MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL | + MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP) << + lane; + if ((gp_status & gp_mask) == gp_mask) { + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_ADV_PAUSE, &ld_pause); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); + } else { + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LD, &ld_pause); + bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &lp_pause); + ld_pause = ((ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + << 3); + lp_pause = ((lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + << 3); + } } else { bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, @@ -3699,7 +3732,23 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, u16 val16 = 0, lane, bam37 = 0; struct bnx2x *bp = params->bp; DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); - + /* Set to default registers that may be overriden by 10G force */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_PAR_DET_10G_CTRL, 0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, 0x7415); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190); /* Disable Autoneg: re-enable it after adv is done. */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0); @@ -3945,13 +3994,13 @@ static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy, } else { misc1_val |= 0x9; - tap_val = ((0x12 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | - (0x2d << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | - (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); + tap_val = ((0x0f << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | + (0x2b << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | + (0x02 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); tx_driver_val = - ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | + ((0x03 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); + (0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); } bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val); @@ -4369,7 +4418,7 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, switch (serdes_net_if) { case PORT_HW_CFG_NET_SERDES_IF_KR: /* Enable KR Auto Neg */ - if (params->loopback_mode == LOOPBACK_NONE) + if (params->loopback_mode != LOOPBACK_EXT) bnx2x_warpcore_enable_AN_KR(phy, params, vars); else { DP(NETIF_MSG_LINK, "Setting KR 10G-Force\n"); @@ -6167,12 +6216,14 @@ int bnx2x_set_led(struct link_params *params, tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); if (params->phy[EXT_PHY1].type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) - EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp & 0xfff1); - else { - EMAC_WR(bp, EMAC_REG_EMAC_LED, - (tmp | EMAC_LED_OVERRIDE)); - } + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) + tmp &= ~(EMAC_LED_1000MB_OVERRIDE | + EMAC_LED_100MB_OVERRIDE | + EMAC_LED_10MB_OVERRIDE); + else + tmp |= EMAC_LED_OVERRIDE; + + EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp); break; case LED_MODE_OPER: @@ -6227,10 +6278,15 @@ int bnx2x_set_led(struct link_params *params, hw_led_mode); } else if ((params->phy[EXT_PHY1].type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) && - (mode != LED_MODE_OPER)) { + (mode == LED_MODE_ON)) { REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | 0x3); + EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | + EMAC_LED_OVERRIDE | EMAC_LED_1000MB_OVERRIDE); + /* Break here; otherwise, it'll disable the + * intended override. + */ + break; } else REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode); @@ -6245,13 +6301,9 @@ int bnx2x_set_led(struct link_params *params, LED_BLINK_RATE_VAL_E1X_E2); REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port*4, 1); - if ((params->phy[EXT_PHY1].type != - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) && - (mode != LED_MODE_OPER)) { - tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); - EMAC_WR(bp, EMAC_REG_EMAC_LED, - (tmp & (~EMAC_LED_OVERRIDE))); - } + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp & (~EMAC_LED_OVERRIDE))); if (CHIP_IS_E1(bp) && ((speed == SPEED_2500) || @@ -6844,6 +6896,12 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars) SINGLE_MEDIA_DIRECT(params)) && (phy_vars[active_external_phy].fault_detected == 0)); + /* Update the PFC configuration in case it was changed */ + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + else + vars->link_status &= ~LINK_STATUS_PFC_ENABLED; + if (vars->link_up) rc = bnx2x_update_link_up(params, vars, link_10g_plus); else @@ -8031,7 +8089,9 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, netdev_err(bp->dev, "Warning: Unqualified SFP+ module detected," " Port %d from %s part number %s\n", params->port, vendor_name, vendor_pn); - phy->flags |= FLAGS_SFP_NOT_APPROVED; + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) != + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG) + phy->flags |= FLAGS_SFP_NOT_APPROVED; return -EINVAL; } @@ -9091,6 +9151,12 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy, tmp2 &= 0xFFEF; bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, tmp2); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + &tmp2); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + (tmp2 & 0x7fff)); } return 0; @@ -9271,12 +9337,11 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, ((1<<5) | (1<<2))); } - DP(NETIF_MSG_LINK, "Enabling 8727 TX laser if SFP is approved\n"); - bnx2x_8727_specific_func(phy, params, ENABLE_TX); - /* If transmitter is disabled, ignore false link up indication */ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &val1); - if (val1 & (1<<15)) { + + if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) { + DP(NETIF_MSG_LINK, "Enabling 8727 TX laser\n"); + bnx2x_sfp_set_transmitter(params, phy, 1); + } else { DP(NETIF_MSG_LINK, "Tx is disabled\n"); return 0; } @@ -9370,8 +9435,7 @@ static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1); - bnx2x_save_spirom_version(bp, port, - ((fw_ver1 & 0xf000)>>5) | (fw_ver1 & 0x7f), + bnx2x_save_spirom_version(bp, port, fw_ver1 & 0xfff, phy->ver_addr); } else { /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */ @@ -9794,6 +9858,15 @@ static int bnx2x_84833_hw_reset_phy(struct bnx2x_phy *phy, other_shmem_base_addr)); u32 shmem_base_path[2]; + + /* Work around for 84833 LED failure inside RESET status */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + MDIO_AN_REG_8481_MII_CTRL_FORCE_1G); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, + MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF); + shmem_base_path[0] = params->shmem_base; shmem_base_path[1] = other_shmem_base_addr; @@ -10104,7 +10177,7 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, u8 port; u16 val16; - if (!(CHIP_IS_E1(bp))) + if (!(CHIP_IS_E1x(bp))) port = BP_PATH(bp); else port = params->port; @@ -10131,7 +10204,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, u16 val; u8 port; - if (!(CHIP_IS_E1(bp))) + if (!(CHIP_IS_E1x(bp))) port = BP_PATH(bp); else port = params->port; @@ -12050,6 +12123,9 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_emac_init(params, vars); + if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + if (params->num_phys == 0) { DP(NETIF_MSG_LINK, "No phy found for initialization !!\n"); return -EINVAL; @@ -12129,10 +12205,10 @@ int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, * Hold it as vars low */ /* clear link led */ + bnx2x_set_mdio_clk(bp, params->chip_id, port); bnx2x_set_led(params, vars, LED_MODE_OFF, 0); if (reset_ext_phy) { - bnx2x_set_mdio_clk(bp, params->chip_id, port); for (phy_index = EXT_PHY1; phy_index < params->num_phys; phy_index++) { if (params->phy[phy_index].link_reset) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index 7ba557a610da..763535ee4832 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -89,6 +89,8 @@ #define PFC_BRB_FULL_LB_XON_THRESHOLD 250 #define MAXVAL(a, b) (((a) > (b)) ? (a) : (b)) + +#define BMAC_CONTROL_RX_ENABLE 2 /***********************************************************/ /* Structs */ /***********************************************************/ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f7f9aa807264..e077d2508727 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -52,6 +52,7 @@ #include <linux/prefetch.h> #include <linux/zlib.h> #include <linux/io.h> +#include <linux/semaphore.h> #include <linux/stringify.h> #include <linux/vmalloc.h> @@ -211,6 +212,10 @@ static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = { MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl); +/* Global resources for unloading a previously loaded device */ +#define BNX2X_PREV_WAIT_NEEDED 1 +static DEFINE_SEMAPHORE(bnx2x_prev_sem); +static LIST_HEAD(bnx2x_prev_list); /**************************************************************************** * General service functions ****************************************************************************/ @@ -8812,109 +8817,371 @@ static inline void bnx2x_undi_int_disable(struct bnx2x *bp) bnx2x_undi_int_disable_e1h(bp); } -static void __devinit bnx2x_undi_unload(struct bnx2x *bp) +static void __devinit bnx2x_prev_unload_close_mac(struct bnx2x *bp) { - u32 val; + u32 val, base_addr, offset, mask, reset_reg; + bool mac_stopped = false; + u8 port = BP_PORT(bp); - /* possibly another driver is trying to reset the chip */ - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); - /* check if doorbell queue is reset */ - if (REG_RD(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET) - & MISC_REGISTERS_RESET_REG_1_RST_DORQ) { + if (!CHIP_IS_E3(bp)) { + val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4); + mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port; + if ((mask & reset_reg) && val) { + u32 wb_data[2]; + BNX2X_DEV_INFO("Disable bmac Rx\n"); + base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM + : NIG_REG_INGRESS_BMAC0_MEM; + offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL + : BIGMAC_REGISTER_BMAC_CONTROL; - /* - * Check if it is the UNDI driver + /* + * use rd/wr since we cannot use dmae. This is safe + * since MCP won't access the bus due to the request + * to unload, and no function on the path can be + * loaded at this time. + */ + wb_data[0] = REG_RD(bp, base_addr + offset); + wb_data[1] = REG_RD(bp, base_addr + offset + 0x4); + wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; + REG_WR(bp, base_addr + offset, wb_data[0]); + REG_WR(bp, base_addr + offset + 0x4, wb_data[1]); + + } + BNX2X_DEV_INFO("Disable emac Rx\n"); + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4, 0); + + mac_stopped = true; + } else { + if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) { + BNX2X_DEV_INFO("Disable xmac Rx\n"); + base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI); + REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, + val & ~(1 << 1)); + REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, + val | (1 << 1)); + REG_WR(bp, base_addr + XMAC_REG_CTRL, 0); + mac_stopped = true; + } + mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; + if (mask & reset_reg) { + BNX2X_DEV_INFO("Disable umac Rx\n"); + base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + REG_WR(bp, base_addr + UMAC_REG_COMMAND_CONFIG, 0); + mac_stopped = true; + } + } + + if (mac_stopped) + msleep(20); + +} + +#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4)) +#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff) +#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff) +#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq)) + +static void __devinit bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 port, + u8 inc) +{ + u16 rcq, bd; + u32 tmp_reg = REG_RD(bp, BNX2X_PREV_UNDI_PROD_ADDR(port)); + + rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc; + bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc; + + tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd); + REG_WR(bp, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg); + + BNX2X_DEV_INFO("UNDI producer [%d] rings bd -> 0x%04x, rcq -> 0x%04x\n", + port, bd, rcq); +} + +static int __devinit bnx2x_prev_mcp_done(struct bnx2x *bp) +{ + u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); + if (!rc) { + BNX2X_ERR("MCP response failure, aborting\n"); + return -EBUSY; + } + + return 0; +} + +static bool __devinit bnx2x_prev_is_path_marked(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *tmp_list; + int rc = false; + + if (down_trylock(&bnx2x_prev_sem)) + return false; + + list_for_each_entry(tmp_list, &bnx2x_prev_list, list) { + if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot && + bp->pdev->bus->number == tmp_list->bus && + BP_PATH(bp) == tmp_list->path) { + rc = true; + BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n", + BP_PATH(bp)); + break; + } + } + + up(&bnx2x_prev_sem); + + return rc; +} + +static int __devinit bnx2x_prev_mark_path(struct bnx2x *bp) +{ + struct bnx2x_prev_path_list *tmp_list; + int rc; + + tmp_list = (struct bnx2x_prev_path_list *) + kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL); + if (!tmp_list) { + BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n"); + return -ENOMEM; + } + + tmp_list->bus = bp->pdev->bus->number; + tmp_list->slot = PCI_SLOT(bp->pdev->devfn); + tmp_list->path = BP_PATH(bp); + + rc = down_interruptible(&bnx2x_prev_sem); + if (rc) { + BNX2X_ERR("Received %d when tried to take lock\n", rc); + kfree(tmp_list); + } else { + BNX2X_DEV_INFO("Marked path [%d] - finished previous unload\n", + BP_PATH(bp)); + list_add(&tmp_list->list, &bnx2x_prev_list); + up(&bnx2x_prev_sem); + } + + return rc; +} + +static bool __devinit bnx2x_can_flr(struct bnx2x *bp) +{ + int pos; + u32 cap; + struct pci_dev *dev = bp->pdev; + + pos = pci_pcie_cap(dev); + if (!pos) + return false; + + pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap); + if (!(cap & PCI_EXP_DEVCAP_FLR)) + return false; + + return true; +} + +static int __devinit bnx2x_do_flr(struct bnx2x *bp) +{ + int i, pos; + u16 status; + struct pci_dev *dev = bp->pdev; + + /* probe the capability first */ + if (bnx2x_can_flr(bp)) + return -ENOTTY; + + pos = pci_pcie_cap(dev); + if (!pos) + return -ENOTTY; + + /* Wait for Transaction Pending bit clean */ + for (i = 0; i < 4; i++) { + if (i) + msleep((1 << (i - 1)) * 100); + + pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status); + if (!(status & PCI_EXP_DEVSTA_TRPND)) + goto clear; + } + + dev_err(&dev->dev, + "transaction is not cleared; proceeding with reset anyway\n"); + +clear: + if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { + BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", + bp->common.bc_ver); + return -EINVAL; + } + + bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0); + + return 0; +} + +static int __devinit bnx2x_prev_unload_uncommon(struct bnx2x *bp) +{ + int rc; + + BNX2X_DEV_INFO("Uncommon unload Flow\n"); + + /* Test if previous unload process was already finished for this path */ + if (bnx2x_prev_is_path_marked(bp)) + return bnx2x_prev_mcp_done(bp); + + /* If function has FLR capabilities, and existing FW version matches + * the one required, then FLR will be sufficient to clean any residue + * left by previous driver + */ + if (bnx2x_test_firmware_version(bp, false) && bnx2x_can_flr(bp)) + return bnx2x_do_flr(bp); + + /* Close the MCP request, return failure*/ + rc = bnx2x_prev_mcp_done(bp); + if (!rc) + rc = BNX2X_PREV_WAIT_NEEDED; + + return rc; +} + +static int __devinit bnx2x_prev_unload_common(struct bnx2x *bp) +{ + u32 reset_reg, tmp_reg = 0, rc; + /* It is possible a previous function received 'common' answer, + * but hasn't loaded yet, therefore creating a scenario of + * multiple functions receiving 'common' on the same path. + */ + BNX2X_DEV_INFO("Common unload Flow\n"); + + if (bnx2x_prev_is_path_marked(bp)) + return bnx2x_prev_mcp_done(bp); + + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1); + + /* Reset should be performed after BRB is emptied */ + if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) { + u32 timer_count = 1000; + bool prev_undi = false; + + /* Close the MAC Rx to prevent BRB from filling up */ + bnx2x_prev_unload_close_mac(bp); + + /* Check if the UNDI driver was previously loaded * UNDI driver initializes CID offset for normal bell to 0x7 */ - val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); - if (val == 0x7) { - u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; - /* save our pf_num */ - int orig_pf_num = bp->pf_num; - int port; - u32 swap_en, swap_val, value; - - /* clear the UNDI indication */ - REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); - - BNX2X_DEV_INFO("UNDI is active! reset device\n"); - - /* try unload UNDI on port 0 */ - bp->pf_num = 0; - bp->fw_seq = - (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - reset_code = bnx2x_fw_command(bp, reset_code, 0); - - /* if UNDI is loaded on the other port */ - if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) { - - /* send "DONE" for previous unload */ - bnx2x_fw_command(bp, - DRV_MSG_CODE_UNLOAD_DONE, 0); - - /* unload UNDI on port 1 */ - bp->pf_num = 1; - bp->fw_seq = - (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; - - bnx2x_fw_command(bp, reset_code, 0); + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1); + if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) { + tmp_reg = REG_RD(bp, DORQ_REG_NORM_CID_OFST); + if (tmp_reg == 0x7) { + BNX2X_DEV_INFO("UNDI previously loaded\n"); + prev_undi = true; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); } + } + /* wait until BRB is empty */ + tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); + while (timer_count) { + u32 prev_brb = tmp_reg; - bnx2x_undi_int_disable(bp); - port = BP_PORT(bp); - - /* close input traffic and wait for it */ - /* Do not rcv packets to BRB */ - REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_DRV_MASK : - NIG_REG_LLH0_BRB1_DRV_MASK), 0x0); - /* Do not direct rcv packets that are not for MCP to - * the BRB */ - REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP : - NIG_REG_LLH0_BRB1_NOT_MCP), 0x0); - /* clear AEU */ - REG_WR(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : - MISC_REG_AEU_MASK_ATTN_FUNC_0), 0); - msleep(10); - - /* save NIG port swap info */ - swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); - swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - /* reset device */ - REG_WR(bp, - GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, - 0xd3ffffff); - - value = 0x1400; - if (CHIP_IS_E3(bp)) { - value |= MISC_REGISTERS_RESET_REG_2_MSTAT0; - value |= MISC_REGISTERS_RESET_REG_2_MSTAT1; - } + tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS); + if (!tmp_reg) + break; - REG_WR(bp, - GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - value); + BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg); - /* take the NIG out of reset and restore swap values */ - REG_WR(bp, - GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, - MISC_REGISTERS_RESET_REG_1_RST_NIG); - REG_WR(bp, NIG_REG_PORT_SWAP, swap_val); - REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en); + /* reset timer as long as BRB actually gets emptied */ + if (prev_brb > tmp_reg) + timer_count = 1000; + else + timer_count--; - /* send unload done to the MCP */ - bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); + /* If UNDI resides in memory, manually increment it */ + if (prev_undi) + bnx2x_prev_unload_undi_inc(bp, BP_PORT(bp), 1); - /* restore our func and fw_seq */ - bp->pf_num = orig_pf_num; + udelay(10); } + + if (!timer_count) + BNX2X_ERR("Failed to empty BRB, hope for the best\n"); + } - /* now it's safe to release the lock */ - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + /* No packets are in the pipeline, path is ready for reset */ + bnx2x_reset_common(bp); + + rc = bnx2x_prev_mark_path(bp); + if (rc) { + bnx2x_prev_mcp_done(bp); + return rc; + } + + return bnx2x_prev_mcp_done(bp); +} + +static int __devinit bnx2x_prev_unload(struct bnx2x *bp) +{ + int time_counter = 10; + u32 rc, fw, hw_lock_reg, hw_lock_val; + BNX2X_DEV_INFO("Entering Previous Unload Flow\n"); + + /* Release previously held locks */ + hw_lock_reg = (BP_FUNC(bp) <= 5) ? + (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) : + (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8); + + hw_lock_val = (REG_RD(bp, hw_lock_reg)); + if (hw_lock_val) { + if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) { + BNX2X_DEV_INFO("Release Previously held NVRAM lock\n"); + REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB, + (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp))); + } + + BNX2X_DEV_INFO("Release Previously held hw lock\n"); + REG_WR(bp, hw_lock_reg, 0xffffffff); + } else + BNX2X_DEV_INFO("No need to release hw/nvram locks\n"); + + if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) { + BNX2X_DEV_INFO("Release previously held alr\n"); + REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0); + } + + + do { + /* Lock MCP using an unload request */ + fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0); + if (!fw) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + break; + } + + if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) { + rc = bnx2x_prev_unload_common(bp); + break; + } + + /* non-common reply from MCP night require looping */ + rc = bnx2x_prev_unload_uncommon(bp); + if (rc != BNX2X_PREV_WAIT_NEEDED) + break; + + msleep(20); + } while (--time_counter); + + if (!time_counter || rc) { + BNX2X_ERR("Failed unloading previous driver, aborting\n"); + rc = -EBUSY; + } + + BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc); + + return rc; } static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) @@ -10100,8 +10367,16 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp) func = BP_FUNC(bp); /* need to reset chip if undi was active */ - if (!BP_NOMCP(bp)) - bnx2x_undi_unload(bp); + if (!BP_NOMCP(bp)) { + /* init fw_seq */ + bp->fw_seq = + SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK; + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + + bnx2x_prev_unload(bp); + } + if (CHIP_REV_IS_FPGA(bp)) dev_err(&bp->pdev->dev, "FPGA detected\n"); @@ -11431,9 +11706,18 @@ static int __init bnx2x_init(void) static void __exit bnx2x_cleanup(void) { + struct list_head *pos, *q; pci_unregister_driver(&bnx2x_pci_driver); destroy_workqueue(bnx2x_wq); + + /* Free globablly allocated resources */ + list_for_each_safe(pos, q, &bnx2x_prev_list) { + struct bnx2x_prev_path_list *tmp = + list_entry(pos, struct bnx2x_prev_path_list, list); + list_del(pos); + kfree(tmp); + } } void bnx2x_notify_link_changed(struct bnx2x *bp) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index fd7fb4581849..c25803b9c0ca 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -987,6 +987,7 @@ * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */ #define IGU_REG_WRITE_DONE_PENDING 0x130480 #define MCP_A_REG_MCPR_SCRATCH 0x3a0000 +#define MCP_REG_MCPR_ACCESS_LOCK 0x8009c #define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c #define MCP_REG_MCPR_GP_INPUTS 0x800c0 #define MCP_REG_MCPR_GP_OENABLE 0x800c8 @@ -1686,6 +1687,7 @@ [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13] Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16] rst_pxp_rq_rd_wr; 31:17] reserved */ +#define MISC_REG_RESET_REG_1 0xa580 #define MISC_REG_RESET_REG_2 0xa590 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is shared with the driver resides */ @@ -5352,6 +5354,7 @@ #define XMAC_CTRL_REG_TX_EN (0x1<<0) #define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1<<18) #define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1<<17) +#define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON (0x1<<1) #define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN (0x1<<0) #define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN (0x1<<3) #define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN (0x1<<4) @@ -5606,6 +5609,7 @@ /* [RC 32] Parity register #0 read clear */ #define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128 #define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138 +#define MCPR_ACCESS_LOCK_LOCK (1L<<31) #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) @@ -5732,6 +5736,7 @@ #define MISC_REGISTERS_GPIO_PORT_SHIFT 4 #define MISC_REGISTERS_GPIO_SET_POS 8 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 +#define MISC_REGISTERS_RESET_REG_1_RST_BRB1 (0x1<<0) #define MISC_REGISTERS_RESET_REG_1_RST_DORQ (0x1<<19) #define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1<<29) #define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7) @@ -6816,10 +6821,13 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0 +#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40 #define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1 #define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4 #define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6 #define MDIO_AN_REG_8481_1000T_CTRL 0xffe9 +#define MDIO_AN_REG_8481_1G_100T_EXT_CTRL 0xfff0 +#define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF 0x0008 #define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5 #define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7 #define MDIO_AN_REG_8481_AUX_CTRL 0xfff8 @@ -6939,6 +6947,10 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_GP2_STATUS_GP_2_2 0x81d2 #define MDIO_WC_REG_GP2_STATUS_GP_2_3 0x81d3 #define MDIO_WC_REG_GP2_STATUS_GP_2_4 0x81d4 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1 #define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP 0x81EE #define MDIO_WC_REG_UC_INFO_B1_VERSION 0x81F0 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE 0x81F2 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 3f52fadee3ed..513573321625 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -3847,7 +3847,7 @@ static bool bnx2x_credit_pool_get_entry( continue; /* If we've got here we are going to find a free entry */ - for (idx = vec * BNX2X_POOL_VEC_SIZE, i = 0; + for (idx = vec * BIT_VEC64_ELEM_SZ, i = 0; i < BIT_VEC64_ELEM_SZ; idx++, i++) if (BIT_VEC64_TEST_BIT(o->pool_mirror, idx)) { diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 4e4bb3875868..062ac333fde6 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2778,7 +2778,9 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 && - (tp->phy_flags & TG3_PHYFLG_MII_SERDES))) + (tp->phy_flags & TG3_PHYFLG_MII_SERDES)) || + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 && + !tp->pci_fn)) return; if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX || diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 05ff076af06d..b126b98065a9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -2000,13 +2000,6 @@ static const struct ethtool_ops cxgb_ethtool_ops = { /* * debugfs support */ - -static int mem_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t mem_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -2050,7 +2043,7 @@ static ssize_t mem_read(struct file *file, char __user *buf, size_t count, static const struct file_operations mem_debugfs_fops = { .owner = THIS_MODULE, - .open = mem_open, + .open = simple_open, .read = mem_read, .llseek = default_llseek, }; diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 9eb815941df5..f7f0bf5d037b 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -356,13 +356,13 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev) if (prop) tbiaddr = *prop; - } - if (tbiaddr == -1) { - err = -EBUSY; - goto err_free_irqs; - } else { - out_be32(tbipa, tbiaddr); + if (tbiaddr == -1) { + err = -EBUSY; + goto err_free_irqs; + } else { + out_be32(tbipa, tbiaddr); + } } err = of_mdiobus_register(new_bus, np); diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 4e3cd2f8debb..17a46e76123f 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -3945,6 +3945,8 @@ static int ucc_geth_probe(struct platform_device* ofdev) } if (max_speed == SPEED_1000) { + unsigned int snums = qe_get_num_of_snums(); + /* configure muram FIFOs for gigabit operation */ ug_info->uf_info.urfs = UCC_GETH_URFS_GIGA_INIT; ug_info->uf_info.urfet = UCC_GETH_URFET_GIGA_INIT; @@ -3954,11 +3956,11 @@ static int ucc_geth_probe(struct platform_device* ofdev) ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT; ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4; - /* If QE's snum number is 46 which means we need to support + /* If QE's snum number is 46/76 which means we need to support * 4 UECs at 1000Base-T simultaneously, we need to allocate * more Threads to Rx. */ - if (qe_get_num_of_snums() == 46) + if ((snums == 76) || (snums == 46)) ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6; else ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4; diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 0e9aec8f6917..4348b6fd44fa 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -164,6 +164,8 @@ static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter, static bool e1000_vlan_used(struct e1000_adapter *adapter); static void e1000_vlan_mode(struct net_device *netdev, netdev_features_t features); +static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter, + bool filter_on); static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid); static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid); static void e1000_restore_vlan(struct e1000_adapter *adapter); @@ -215,7 +217,8 @@ MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE; +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); @@ -979,7 +982,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter = netdev_priv(netdev); adapter->netdev = netdev; adapter->pdev = pdev; - adapter->msg_enable = (1 << debug) - 1; + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); adapter->bars = bars; adapter->need_ioport = need_ioport; @@ -1214,7 +1217,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (err) goto err_register; - e1000_vlan_mode(netdev, netdev->features); + e1000_vlan_filter_on_off(adapter, false); /* print bus type/speed/width info */ e_info(probe, "(PCI%s:%dMHz:%d-bit) %pM\n", @@ -4770,6 +4773,22 @@ static bool e1000_vlan_used(struct e1000_adapter *adapter) return false; } +static void __e1000_vlan_mode(struct e1000_adapter *adapter, + netdev_features_t features) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl; + + ctrl = er32(CTRL); + if (features & NETIF_F_HW_VLAN_RX) { + /* enable VLAN tag insert/strip */ + ctrl |= E1000_CTRL_VME; + } else { + /* disable VLAN tag insert/strip */ + ctrl &= ~E1000_CTRL_VME; + } + ew32(CTRL, ctrl); +} static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter, bool filter_on) { @@ -4779,6 +4798,7 @@ static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter, if (!test_bit(__E1000_DOWN, &adapter->flags)) e1000_irq_disable(adapter); + __e1000_vlan_mode(adapter, adapter->netdev->features); if (filter_on) { /* enable VLAN receive filtering */ rctl = er32(RCTL); @@ -4799,24 +4819,14 @@ static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter, } static void e1000_vlan_mode(struct net_device *netdev, - netdev_features_t features) + netdev_features_t features) { struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl; if (!test_bit(__E1000_DOWN, &adapter->flags)) e1000_irq_disable(adapter); - ctrl = er32(CTRL); - if (features & NETIF_F_HW_VLAN_RX) { - /* enable VLAN tag insert/strip */ - ctrl |= E1000_CTRL_VME; - } else { - /* disable VLAN tag insert/strip */ - ctrl &= ~E1000_CTRL_VME; - } - ew32(CTRL, ctrl); + __e1000_vlan_mode(adapter, features); if (!test_bit(__E1000_DOWN, &adapter->flags)) e1000_irq_enable(adapter); diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 86cdd4793992..b83897f76ee3 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -161,6 +161,12 @@ struct e1000_info; /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 +/* + * Count for polling __E1000_RESET condition every 10-20msec. + * Experimentation has shown the reset can take approximately 210msec. + */ +#define E1000_CHECK_RESET_COUNT 25 + #define DEFAULT_RDTR 0 #define DEFAULT_RADV 8 #define BURST_RDTR 0x20 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 7152eb11b7b9..19ab2154802c 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -60,6 +60,11 @@ char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state); static const struct e1000_info *e1000_info_tbl[] = { @@ -1054,6 +1059,13 @@ static void e1000_print_hw_hang(struct work_struct *work) ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); /* execute the writes immediately */ e1e_flush(); + /* + * Due to rare timing issues, write to TIDV again to ensure + * the write is successful + */ + ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); + /* execute the writes immediately */ + e1e_flush(); adapter->tx_hang_recheck = true; return; } @@ -3611,6 +3623,16 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter) /* execute the writes immediately */ e1e_flush(); + + /* + * due to rare timing issues, write to TIDV/RDTR again to ensure the + * write is successful + */ + ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); + ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); + + /* execute the writes immediately */ + e1e_flush(); } static void e1000e_update_stats(struct e1000_adapter *adapter); @@ -3963,6 +3985,10 @@ static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct pci_dev *pdev = adapter->pdev; + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); @@ -5467,6 +5493,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, netif_device_detach(netdev); if (netif_running(netdev)) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); + WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); e1000e_down(adapter); e1000_free_irq(adapter); @@ -6172,7 +6203,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->max_hw_frame_size = ei->max_hw_frame_size; - adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index c4902411d749..5ec31598ee47 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -238,6 +238,11 @@ MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + struct igb_reg_info { u32 ofs; char *name; @@ -1893,7 +1898,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, adapter->pdev = pdev; hw = &adapter->hw; hw->back = adapter; - adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE; + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 217c143686d2..d61ca2a732f0 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -55,6 +55,11 @@ static const char igbvf_driver_string[] = static const char igbvf_copyright[] = "Copyright (c) 2009 - 2012 Intel Corporation."; +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + static int igbvf_poll(struct napi_struct *napi, int budget); static void igbvf_reset(struct igbvf_adapter *); static void igbvf_set_interrupt_capability(struct igbvf_adapter *); @@ -2649,7 +2654,7 @@ static int __devinit igbvf_probe(struct pci_dev *pdev, adapter->flags = ei->flags; adapter->hw.back = adapter; adapter->hw.mac.type = ei->mac; - adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); /* PCI config space info */ diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index 82aaa792cbf3..5fce363d810a 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -134,8 +134,8 @@ MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -#define DEFAULT_DEBUG_LEVEL_SHIFT 3 -static int debug = DEFAULT_DEBUG_LEVEL_SHIFT; +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); @@ -442,7 +442,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->netdev = netdev; adapter->pdev = pdev; adapter->hw.back = adapter; - adapter->msg_enable = netif_msg_init(debug, DEFAULT_DEBUG_LEVEL_SHIFT); + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); adapter->hw.hw_addr = pci_ioremap_bar(pdev, BAR_0); if (!adapter->hw.hw_addr) { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 80e26ff30ebf..74e192107f9a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -544,7 +544,7 @@ struct ixgbe_fdir_filter { u16 action; }; -enum ixbge_state_t { +enum ixgbe_state_t { __IXGBE_TESTING, __IXGBE_RESETTING, __IXGBE_DOWN, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index dde65f951400..652e4b09546d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -44,62 +44,94 @@ #define DCB_NO_HW_CHG 1 /* DCB configuration did not change */ #define DCB_HW_CHG 2 /* DCB configuration changed, no reset */ -int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, - struct ixgbe_dcb_config *dst_dcb_cfg, int tc_max) +int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *scfg, + struct ixgbe_dcb_config *dcfg, int tc_max) { - struct tc_configuration *src_tc_cfg = NULL; - struct tc_configuration *dst_tc_cfg = NULL; - int i; + struct tc_configuration *src = NULL; + struct tc_configuration *dst = NULL; + int i, j; + int tx = DCB_TX_CONFIG; + int rx = DCB_RX_CONFIG; + int changes = 0; - if (!src_dcb_cfg || !dst_dcb_cfg) - return -EINVAL; + if (!scfg || !dcfg) + return changes; for (i = DCB_PG_ATTR_TC_0; i < tc_max + DCB_PG_ATTR_TC_0; i++) { - src_tc_cfg = &src_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0]; - dst_tc_cfg = &dst_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0]; + src = &scfg->tc_config[i - DCB_PG_ATTR_TC_0]; + dst = &dcfg->tc_config[i - DCB_PG_ATTR_TC_0]; - dst_tc_cfg->path[DCB_TX_CONFIG].prio_type = - src_tc_cfg->path[DCB_TX_CONFIG].prio_type; + if (dst->path[tx].prio_type != src->path[tx].prio_type) { + dst->path[tx].prio_type = src->path[tx].prio_type; + changes |= BIT_PG_TX; + } - dst_tc_cfg->path[DCB_TX_CONFIG].bwg_id = - src_tc_cfg->path[DCB_TX_CONFIG].bwg_id; + if (dst->path[tx].bwg_id != src->path[tx].bwg_id) { + dst->path[tx].bwg_id = src->path[tx].bwg_id; + changes |= BIT_PG_TX; + } - dst_tc_cfg->path[DCB_TX_CONFIG].bwg_percent = - src_tc_cfg->path[DCB_TX_CONFIG].bwg_percent; + if (dst->path[tx].bwg_percent != src->path[tx].bwg_percent) { + dst->path[tx].bwg_percent = src->path[tx].bwg_percent; + changes |= BIT_PG_TX; + } - dst_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap = - src_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap; + if (dst->path[tx].up_to_tc_bitmap != + src->path[tx].up_to_tc_bitmap) { + dst->path[tx].up_to_tc_bitmap = + src->path[tx].up_to_tc_bitmap; + changes |= (BIT_PG_TX | BIT_PFC | BIT_APP_UPCHG); + } - dst_tc_cfg->path[DCB_RX_CONFIG].prio_type = - src_tc_cfg->path[DCB_RX_CONFIG].prio_type; + if (dst->path[rx].prio_type != src->path[rx].prio_type) { + dst->path[rx].prio_type = src->path[rx].prio_type; + changes |= BIT_PG_RX; + } - dst_tc_cfg->path[DCB_RX_CONFIG].bwg_id = - src_tc_cfg->path[DCB_RX_CONFIG].bwg_id; + if (dst->path[rx].bwg_id != src->path[rx].bwg_id) { + dst->path[rx].bwg_id = src->path[rx].bwg_id; + changes |= BIT_PG_RX; + } - dst_tc_cfg->path[DCB_RX_CONFIG].bwg_percent = - src_tc_cfg->path[DCB_RX_CONFIG].bwg_percent; + if (dst->path[rx].bwg_percent != src->path[rx].bwg_percent) { + dst->path[rx].bwg_percent = src->path[rx].bwg_percent; + changes |= BIT_PG_RX; + } - dst_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap = - src_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap; + if (dst->path[rx].up_to_tc_bitmap != + src->path[rx].up_to_tc_bitmap) { + dst->path[rx].up_to_tc_bitmap = + src->path[rx].up_to_tc_bitmap; + changes |= (BIT_PG_RX | BIT_PFC | BIT_APP_UPCHG); + } } for (i = DCB_PG_ATTR_BW_ID_0; i < DCB_PG_ATTR_BW_ID_MAX; i++) { - dst_dcb_cfg->bw_percentage[DCB_TX_CONFIG] - [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage - [DCB_TX_CONFIG][i-DCB_PG_ATTR_BW_ID_0]; - dst_dcb_cfg->bw_percentage[DCB_RX_CONFIG] - [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage - [DCB_RX_CONFIG][i-DCB_PG_ATTR_BW_ID_0]; + j = i - DCB_PG_ATTR_BW_ID_0; + if (dcfg->bw_percentage[tx][j] != scfg->bw_percentage[tx][j]) { + dcfg->bw_percentage[tx][j] = scfg->bw_percentage[tx][j]; + changes |= BIT_PG_TX; + } + if (dcfg->bw_percentage[rx][j] != scfg->bw_percentage[rx][j]) { + dcfg->bw_percentage[rx][j] = scfg->bw_percentage[rx][j]; + changes |= BIT_PG_RX; + } } for (i = DCB_PFC_UP_ATTR_0; i < DCB_PFC_UP_ATTR_MAX; i++) { - dst_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc = - src_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc; + j = i - DCB_PFC_UP_ATTR_0; + if (dcfg->tc_config[j].dcb_pfc != scfg->tc_config[j].dcb_pfc) { + dcfg->tc_config[j].dcb_pfc = scfg->tc_config[j].dcb_pfc; + changes |= BIT_PFC; + } } - dst_dcb_cfg->pfc_mode_enable = src_dcb_cfg->pfc_mode_enable; + if (dcfg->pfc_mode_enable != scfg->pfc_mode_enable) { + dcfg->pfc_mode_enable = scfg->pfc_mode_enable; + changes |= BIT_PFC; + } - return 0; + return changes; } static u8 ixgbe_dcbnl_get_state(struct net_device *netdev) @@ -179,20 +211,6 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc, if (up_map != DCB_ATTR_VALUE_UNDEFINED) adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap = up_map; - - if ((adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type != - adapter->dcb_cfg.tc_config[tc].path[0].prio_type) || - (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id != - adapter->dcb_cfg.tc_config[tc].path[0].bwg_id) || - (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent != - adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent) || - (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap != - adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap)) - adapter->dcb_set_bitmap |= BIT_PG_TX; - - if (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap != - adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap) - adapter->dcb_set_bitmap |= BIT_PFC | BIT_APP_UPCHG; } static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, @@ -201,10 +219,6 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, struct ixgbe_adapter *adapter = netdev_priv(netdev); adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] = bw_pct; - - if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] != - adapter->dcb_cfg.bw_percentage[0][bwg_id]) - adapter->dcb_set_bitmap |= BIT_PG_TX; } static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc, @@ -223,20 +237,6 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc, if (up_map != DCB_ATTR_VALUE_UNDEFINED) adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap = up_map; - - if ((adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type != - adapter->dcb_cfg.tc_config[tc].path[1].prio_type) || - (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id != - adapter->dcb_cfg.tc_config[tc].path[1].bwg_id) || - (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent != - adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent) || - (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap != - adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap)) - adapter->dcb_set_bitmap |= BIT_PG_RX; - - if (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap != - adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap) - adapter->dcb_set_bitmap |= BIT_PFC; } static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id, @@ -245,10 +245,6 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id, struct ixgbe_adapter *adapter = netdev_priv(netdev); adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] = bw_pct; - - if (adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] != - adapter->dcb_cfg.bw_percentage[1][bwg_id]) - adapter->dcb_set_bitmap |= BIT_PG_RX; } static void ixgbe_dcbnl_get_pg_tc_cfg_tx(struct net_device *netdev, int tc, @@ -298,10 +294,8 @@ static void ixgbe_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority, adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc = setting; if (adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc != - adapter->dcb_cfg.tc_config[priority].dcb_pfc) { - adapter->dcb_set_bitmap |= BIT_PFC; + adapter->dcb_cfg.tc_config[priority].dcb_pfc) adapter->temp_dcb_cfg.pfc_mode_enable = true; - } } static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, @@ -336,7 +330,8 @@ static void ixgbe_dcbnl_devreset(struct net_device *dev) static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - int ret, i; + int ret = DCB_NO_HW_CHG; + int i; #ifdef IXGBE_FCOE struct dcb_app app = { .selector = DCB_APP_IDTYPE_ETHTYPE, @@ -355,12 +350,13 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) /* Fail command if not in CEE mode */ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) - return 1; + return ret; - ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, - MAX_TRAFFIC_CLASS); - if (ret) - return DCB_NO_HW_CHG; + adapter->dcb_set_bitmap |= ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, + &adapter->dcb_cfg, + MAX_TRAFFIC_CLASS); + if (!adapter->dcb_set_bitmap) + return ret; if (adapter->dcb_cfg.pfc_mode_enable) { switch (adapter->hw.mac.type) { @@ -420,6 +416,8 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) netdev_set_prio_tc_map(netdev, i, prio_tc[i]); + + ret = DCB_HW_CHG_RST; } if (adapter->dcb_set_bitmap & BIT_PFC) { @@ -430,7 +428,8 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) DCB_TX_CONFIG, prio_tc); ixgbe_dcb_unpack_pfc(&adapter->dcb_cfg, &pfc_en); ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc_en, prio_tc); - ret = DCB_HW_CHG; + if (ret != DCB_HW_CHG_RST) + ret = DCB_HW_CHG; } if (adapter->dcb_cfg.pfc_mode_enable) @@ -531,9 +530,6 @@ static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state) struct ixgbe_adapter *adapter = netdev_priv(netdev); adapter->temp_dcb_cfg.pfc_mode_enable = state; - if (adapter->temp_dcb_cfg.pfc_mode_enable != - adapter->dcb_cfg.pfc_mode_enable) - adapter->dcb_set_bitmap |= BIT_PFC; } /** diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 398fc223cab9..3e26b1f9ac75 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -63,8 +63,8 @@ static char ixgbe_default_device_descr[] = "Intel(R) 10 Gigabit Network Connection"; #endif #define MAJ 3 -#define MIN 6 -#define BUILD 7 +#define MIN 8 +#define BUILD 21 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ __stringify(BUILD) "-k" const char ixgbe_driver_version[] = DRV_VERSION; @@ -141,13 +141,16 @@ module_param(allow_unsupported_sfp, uint, 0); MODULE_PARM_DESC(allow_unsupported_sfp, "Allow unsupported and untested SFP+ modules on 82599-based adapters"); +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -#define DEFAULT_DEBUG_LEVEL_SHIFT 3 - static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter) { if (!test_bit(__IXGBE_DOWN, &adapter->state) && @@ -6834,7 +6837,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, adapter->pdev = pdev; hw = &adapter->hw; hw->back = adapter; - adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); hw->hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 581c65976bb4..307611ae831d 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -91,7 +91,10 @@ MODULE_DESCRIPTION("Intel(R) 82599 Virtual Function Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -#define DEFAULT_DEBUG_LEVEL_SHIFT 3 +#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); /* forward decls */ static void ixgbevf_set_itr_msix(struct ixgbevf_q_vector *q_vector); @@ -3367,7 +3370,7 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev, adapter->pdev = pdev; hw = &adapter->hw; hw->back = adapter; - adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; + adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); /* * call save state here in standalone driver because it relies on diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 423a1a2a702e..c9b504e2dfc3 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -1767,13 +1767,14 @@ static int sky2_open(struct net_device *dev) sky2_hw_up(sky2); + /* Enable interrupts from phy/mac for port */ + imask = sky2_read32(hw, B0_IMSK); + if (hw->chip_id == CHIP_ID_YUKON_OPT || hw->chip_id == CHIP_ID_YUKON_PRM || hw->chip_id == CHIP_ID_YUKON_OP_2) imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */ - /* Enable interrupts from phy/mac for port */ - imask = sky2_read32(hw, B0_IMSK); imask |= portirq_msk[port]; sky2_write32(hw, B0_IMSK, imask); sky2_read32(hw, B0_IMSK); @@ -2468,6 +2469,17 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) return err; } +static inline bool needs_copy(const struct rx_ring_info *re, + unsigned length) +{ +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + /* Some architectures need the IP header to be aligned */ + if (!IS_ALIGNED(re->data_addr + ETH_HLEN, sizeof(u32))) + return true; +#endif + return length < copybreak; +} + /* For small just reuse existing skb for next receive */ static struct sk_buff *receive_copy(struct sky2_port *sky2, const struct rx_ring_info *re, @@ -2598,7 +2610,7 @@ static struct sk_buff *sky2_receive(struct net_device *dev, goto error; okay: - if (length < copybreak) + if (needs_copy(re, length)) skb = receive_copy(sky2, re, length); else skb = receive_new(sky2, re, length); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 9e2b911a1230..d69fee41f24a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -83,8 +83,9 @@ #define MLX4_EN_WATCHDOG_TIMEOUT (15 * HZ) -#define MLX4_EN_ALLOC_ORDER 2 -#define MLX4_EN_ALLOC_SIZE (PAGE_SIZE << MLX4_EN_ALLOC_ORDER) +/* Use the maximum between 16384 and a single page */ +#define MLX4_EN_ALLOC_SIZE PAGE_ALIGN(16384) +#define MLX4_EN_ALLOC_ORDER get_order(MLX4_EN_ALLOC_SIZE) #define MLX4_EN_MAX_LRO_DESCRIPTORS 32 diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 69444247c20b..6dfc26d85e47 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1441,7 +1441,7 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) } #endif if (!is_valid_ether_addr(ndev->dev_addr)) - dev_hw_addr_random(ndev, ndev->dev_addr); + eth_hw_addr_random(ndev); /* Reset the ethernet controller */ __lpc_eth_reset(pldat); diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7b23554f80b6..f54509377efa 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5810,7 +5810,10 @@ static void __rtl8169_resume(struct net_device *dev) rtl_pll_power_up(tp); + rtl_lock_work(tp); + napi_enable(&tp->napi); set_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags); + rtl_unlock_work(tp); rtl_schedule_task(tp, RTL_FLAG_TASK_RESET_PENDING); } diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig index 9755b49bbefb..3fb2355af37e 100644 --- a/drivers/net/ethernet/renesas/Kconfig +++ b/drivers/net/ethernet/renesas/Kconfig @@ -7,7 +7,8 @@ config SH_ETH depends on SUPERH && \ (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \ - CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757) + CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7734 || \ + CPU_SUBTYPE_SH7757) select CRC32 select NET_CORE select MII @@ -16,4 +17,4 @@ config SH_ETH ---help--- Renesas SuperH Ethernet device driver. This driver supporting CPUs are: - - SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757. + - SH7619, SH7710, SH7712, SH7724, SH7734, SH7763 and SH7757. diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 8615961c1287..d63e09b29a96 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1,8 +1,8 @@ /* * SuperH Ethernet device driver * - * Copyright (C) 2006-2008 Nobuhiro Iwamatsu - * Copyright (C) 2008-2009 Renesas Solutions Corp. + * Copyright (C) 2006-2012 Nobuhiro Iwamatsu + * Copyright (C) 2008-2012 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -38,6 +38,7 @@ #include <linux/slab.h> #include <linux/ethtool.h> #include <linux/if_vlan.h> +#include <linux/clk.h> #include <linux/sh_eth.h> #include "sh_eth.h" @@ -279,8 +280,9 @@ static struct sh_eth_cpu_data *sh_eth_get_cpu_data(struct sh_eth_private *mdp) return &sh_eth_my_cpu_data; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +#elif defined(CONFIG_CPU_SUBTYPE_SH7734) || defined(CONFIG_CPU_SUBTYPE_SH7763) #define SH_ETH_HAS_TSU 1 +static void sh_eth_reset_hw_crc(struct net_device *ndev); static void sh_eth_chip_reset(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); @@ -314,6 +316,9 @@ static void sh_eth_reset(struct net_device *ndev) sh_eth_write(ndev, 0x0, RDFAR); sh_eth_write(ndev, 0x0, RDFXR); sh_eth_write(ndev, 0x0, RDFFR); + + /* Reset HW CRC register */ + sh_eth_reset_hw_crc(ndev); } static void sh_eth_set_duplex(struct net_device *ndev) @@ -370,8 +375,17 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .no_trimd = 1, .no_ade = 1, .tsu = 1, +#if defined(CONFIG_CPU_SUBTYPE_SH7734) + .hw_crc = 1, +#endif }; +static void sh_eth_reset_hw_crc(struct net_device *ndev) +{ + if (sh_eth_my_cpu_data.hw_crc) + sh_eth_write(ndev, 0x0, CSMR); +} + #elif defined(CONFIG_CPU_SUBTYPE_SH7619) #define SH_ETH_RESET_DEFAULT 1 static struct sh_eth_cpu_data sh_eth_my_cpu_data = { @@ -790,7 +804,7 @@ static int sh_eth_dev_init(struct net_device *ndev) /* all sh_eth int mask */ sh_eth_write(ndev, 0, EESIPR); -#if defined(__LITTLE_ENDIAN__) +#if defined(__LITTLE_ENDIAN) if (mdp->cd->hw_swap) sh_eth_write(ndev, EDMR_EL, EDMR); else diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h index 57dc26261116..0fa14afce23d 100644 --- a/drivers/net/ethernet/renesas/sh_eth.h +++ b/drivers/net/ethernet/renesas/sh_eth.h @@ -1,8 +1,8 @@ /* * SuperH Ethernet device driver * - * Copyright (C) 2006-2008 Nobuhiro Iwamatsu - * Copyright (C) 2008-2011 Renesas Solutions Corp. + * Copyright (C) 2006-2012 Nobuhiro Iwamatsu + * Copyright (C) 2008-2012 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -98,6 +98,8 @@ enum { CEECR, MAFCR, RTRATE, + CSMR, + RMII_MII, /* TSU Absolute address */ ARSTR, @@ -172,6 +174,7 @@ static const u16 sh_eth_offset_gigabit[SH_ETH_MAX_REGISTER_OFFSET] = { [RMCR] = 0x0458, [RPADIR] = 0x0460, [FCFTR] = 0x0468, + [CSMR] = 0x04E4, [ECMR] = 0x0500, [ECSR] = 0x0510, @@ -200,6 +203,7 @@ static const u16 sh_eth_offset_gigabit[SH_ETH_MAX_REGISTER_OFFSET] = { [CERCR] = 0x0768, [CEECR] = 0x0770, [MAFCR] = 0x0778, + [RMII_MII] = 0x0790, [ARSTR] = 0x0000, [TSU_CTRST] = 0x0004, @@ -377,7 +381,7 @@ static const u16 sh_eth_offset_fast_sh3_sh2[SH_ETH_MAX_REGISTER_OFFSET] = { /* * Register's bits */ -#ifdef CONFIG_CPU_SUBTYPE_SH7763 +#if defined(CONFIG_CPU_SUBTYPE_SH7734) || defined(CONFIG_CPU_SUBTYPE_SH7763) /* EDSR */ enum EDSR_BIT { EDSR_ENT = 0x01, EDSR_ENR = 0x02, @@ -689,7 +693,7 @@ enum TSU_FWSLC_BIT { */ struct sh_eth_txdesc { u32 status; /* TD0 */ -#if defined(CONFIG_CPU_LITTLE_ENDIAN) +#if defined(__LITTLE_ENDIAN) u16 pad0; /* TD1 */ u16 buffer_length; /* TD1 */ #else @@ -706,7 +710,7 @@ struct sh_eth_txdesc { */ struct sh_eth_rxdesc { u32 status; /* RD0 */ -#if defined(CONFIG_CPU_LITTLE_ENDIAN) +#if defined(__LITTLE_ENDIAN) u16 frame_length; /* RD1 */ u16 buffer_length; /* RD1 */ #else @@ -751,6 +755,7 @@ struct sh_eth_cpu_data { unsigned rpadir:1; /* E-DMAC have RPADIR */ unsigned no_trimd:1; /* E-DMAC DO NOT have TRIMD */ unsigned no_ade:1; /* E-DMAC DO NOT have ADE bit in EESR */ + unsigned hw_crc:1; /* E-DMAC have CSMR */ }; struct sh_eth_private { diff --git a/drivers/net/ethernet/sfc/mtd.c b/drivers/net/ethernet/sfc/mtd.c index 26b3c23b0b6f..758148379b0e 100644 --- a/drivers/net/ethernet/sfc/mtd.c +++ b/drivers/net/ethernet/sfc/mtd.c @@ -193,7 +193,7 @@ static int efx_mtd_erase(struct mtd_info *mtd, struct erase_info *erase) erase->state = MTD_ERASE_DONE; } else { erase->state = MTD_ERASE_FAILED; - erase->fail_addr = 0xffffffff; + erase->fail_addr = MTD_FAIL_ADDR_UNKNOWN; } mtd_erase_callback(erase); return rc; @@ -263,10 +263,10 @@ static int efx_mtd_probe_device(struct efx_nic *efx, struct efx_mtd *efx_mtd) part->mtd.owner = THIS_MODULE; part->mtd.priv = efx_mtd; part->mtd.name = part->name; - part->mtd.erase = efx_mtd_erase; - part->mtd.read = efx_mtd->ops->read; - part->mtd.write = efx_mtd->ops->write; - part->mtd.sync = efx_mtd_sync; + part->mtd._erase = efx_mtd_erase; + part->mtd._read = efx_mtd->ops->read; + part->mtd._write = efx_mtd->ops->write; + part->mtd._sync = efx_mtd_sync; if (mtd_device_register(&part->mtd, NULL, 0)) goto fail; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e85ffbd54830..48d56da62f08 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1737,10 +1737,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv) struct mac_device_info *mac; /* Identify the MAC HW device */ - if (priv->plat->has_gmac) + if (priv->plat->has_gmac) { + priv->dev->priv_flags |= IFF_UNICAST_FLT; mac = dwmac1000_setup(priv->ioaddr); - else + } else { mac = dwmac100_setup(priv->ioaddr); + } if (!mac) return -ENOMEM; diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 261356c2dc99..3d501ec7fad7 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -342,6 +342,21 @@ inline int __netio_fastio1(u32 fastio_index, u32 arg0) } +static void tile_net_return_credit(struct tile_net_cpu *info) +{ + struct tile_netio_queue *queue = &info->queue; + netio_queue_user_impl_t *qup = &queue->__user_part; + + /* Return four credits after every fourth packet. */ + if (--qup->__receive_credit_remaining == 0) { + u32 interval = qup->__receive_credit_interval; + qup->__receive_credit_remaining = interval; + __netio_fastio_return_credits(qup->__fastio_index, interval); + } +} + + + /* * Provide a linux buffer to LIPP. */ @@ -433,7 +448,7 @@ static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info, struct sk_buff **skb_ptr; /* Request 96 extra bytes for alignment purposes. */ - skb = netdev_alloc_skb(info->napi->dev, len + padding); + skb = netdev_alloc_skb(info->napi.dev, len + padding); if (skb == NULL) return false; @@ -864,19 +879,11 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) stats->rx_packets++; stats->rx_bytes += len; - - if (small) - info->num_needed_small_buffers++; - else - info->num_needed_large_buffers++; } - /* Return four credits after every fourth packet. */ - if (--qup->__receive_credit_remaining == 0) { - u32 interval = qup->__receive_credit_interval; - qup->__receive_credit_remaining = interval; - __netio_fastio_return_credits(qup->__fastio_index, interval); - } + /* ISSUE: It would be nice to defer this until the packet has */ + /* actually been processed. */ + tile_net_return_credit(info); /* Consume this packet. */ qup->__packet_receive_read = index2; @@ -1543,7 +1550,7 @@ static int tile_net_drain_lipp_buffers(struct tile_net_priv *priv) /* Drain all the LIPP buffers. */ while (true) { - int buffer; + unsigned int buffer; /* NOTE: This should never fail. */ if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&buffer, @@ -1707,7 +1714,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, if (!hash_default) { void *va = pfn_to_kaddr(pfn) + f->page_offset; BUG_ON(PageHighMem(skb_frag_page(f))); - finv_buffer_remote(va, f->size, 0); + finv_buffer_remote(va, skb_frag_size(f), 0); } cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset; @@ -1735,8 +1742,8 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, * Sometimes, if "sendfile()" requires copying, we will be called with * "data" containing the header and payload, with "frags" being empty. * - * In theory, "sh->nr_frags" could be 3, but in practice, it seems - * that this will never actually happen. + * Sometimes, for example when using NFS over TCP, a single segment can + * span 3 fragments, which must be handled carefully in LEPP. * * See "emulate_large_send_offload()" for some reference code, which * does not handle checksumming. @@ -1844,10 +1851,8 @@ static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&priv->eq_lock, irqflags); - /* - * Handle completions if needed to make room. - * HACK: Spin until there is sufficient room. - */ + /* Handle completions if needed to make room. */ + /* NOTE: Return NETDEV_TX_BUSY if there is still no room. */ if (lepp_num_free_comp_slots(eq) == 0) { nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 0); if (nolds == 0) { @@ -1861,6 +1866,7 @@ busy: cmd_tail = eq->cmd_tail; /* Prepare to advance, detecting full queue. */ + /* NOTE: Return NETDEV_TX_BUSY if the queue is full. */ cmd_next = cmd_tail + cmd_size; if (cmd_tail < cmd_head && cmd_next >= cmd_head) goto busy; @@ -2023,10 +2029,8 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&priv->eq_lock, irqflags); - /* - * Handle completions if needed to make room. - * HACK: Spin until there is sufficient room. - */ + /* Handle completions if needed to make room. */ + /* NOTE: Return NETDEV_TX_BUSY if there is still no room. */ if (lepp_num_free_comp_slots(eq) == 0) { nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 0); if (nolds == 0) { @@ -2040,6 +2044,7 @@ busy: cmd_tail = eq->cmd_tail; /* Copy the commands, or fail. */ + /* NOTE: Return NETDEV_TX_BUSY if the queue is full. */ for (i = 0; i < num_frags; i++) { /* Prepare to advance, detecting full queue. */ @@ -2261,6 +2266,23 @@ static int tile_net_get_mac(struct net_device *dev) return 0; } + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void tile_net_netpoll(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + disable_percpu_irq(priv->intr_id); + tile_net_handle_ingress_interrupt(priv->intr_id, dev); + enable_percpu_irq(priv->intr_id, 0); +} +#endif + + static const struct net_device_ops tile_net_ops = { .ndo_open = tile_net_open, .ndo_stop = tile_net_stop, @@ -2269,7 +2291,10 @@ static const struct net_device_ops tile_net_ops = { .ndo_get_stats = tile_net_get_stats, .ndo_change_mtu = tile_net_change_mtu, .ndo_tx_timeout = tile_net_tx_timeout, - .ndo_set_mac_address = tile_net_set_mac_address + .ndo_set_mac_address = tile_net_set_mac_address, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tile_net_netpoll, +#endif }; @@ -2409,7 +2434,7 @@ static void tile_net_cleanup(void) */ static int tile_net_init_module(void) { - pr_info("Tilera IPP Net Driver\n"); + pr_info("Tilera Network Driver\n"); tile_net_devs[0] = tile_net_dev_init("xgbe0"); tile_net_devs[1] = tile_net_dev_init("xgbe1"); diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index 39b8cf3dafcd..fcfa01f7ceb6 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -503,30 +503,32 @@ static int rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid); static int rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid); static void rhine_restart_tx(struct net_device *dev); -static void rhine_wait_bit(struct rhine_private *rp, u8 reg, u8 mask, bool high) +static void rhine_wait_bit(struct rhine_private *rp, u8 reg, u8 mask, bool low) { void __iomem *ioaddr = rp->base; int i; for (i = 0; i < 1024; i++) { - if (high ^ !!(ioread8(ioaddr + reg) & mask)) + bool has_mask_bits = !!(ioread8(ioaddr + reg) & mask); + + if (low ^ has_mask_bits) break; udelay(10); } if (i > 64) { netif_dbg(rp, hw, rp->dev, "%s bit wait (%02x/%02x) cycle " - "count: %04d\n", high ? "high" : "low", reg, mask, i); + "count: %04d\n", low ? "low" : "high", reg, mask, i); } } static void rhine_wait_bit_high(struct rhine_private *rp, u8 reg, u8 mask) { - rhine_wait_bit(rp, reg, mask, true); + rhine_wait_bit(rp, reg, mask, false); } static void rhine_wait_bit_low(struct rhine_private *rp, u8 reg, u8 mask) { - rhine_wait_bit(rp, reg, mask, false); + rhine_wait_bit(rp, reg, mask, true); } static u32 rhine_get_events(struct rhine_private *rp) diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index a0d1913a58d3..e25067552b20 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -147,7 +147,7 @@ static void sa1100_irda_dma_start(struct sa1100_buf *buf, struct dma_async_tx_descriptor *desc; struct dma_chan *chan = buf->chan; - desc = chan->device->device_prep_slave_sg(chan, &buf->sg, 1, dir, + desc = dmaengine_prep_slave_sg(chan, &buf->sg, 1, dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (desc) { desc->callback = cb; diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 0856e1b7a849..f08c85acf761 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -162,7 +162,8 @@ static int ip101a_g_config_init(struct phy_device *phydev) /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); c |= IP101A_G_APS_ON; - return c; + + return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); } static int ip175c_read_status(struct phy_device *phydev) diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 159da2905fe9..33f8c51968b6 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -235,7 +235,7 @@ struct ppp_net { /* Prototypes. */ static int ppp_unattached_ioctl(struct net *net, struct ppp_file *pf, struct file *file, unsigned int cmd, unsigned long arg); -static void ppp_xmit_process(struct ppp *ppp); +static int ppp_xmit_process(struct ppp *ppp); static void ppp_send_frame(struct ppp *ppp, struct sk_buff *skb); static void ppp_push(struct ppp *ppp); static void ppp_channel_push(struct channel *pch); @@ -968,9 +968,9 @@ ppp_start_xmit(struct sk_buff *skb, struct net_device *dev) proto = npindex_to_proto[npi]; put_unaligned_be16(proto, pp); - netif_stop_queue(dev); skb_queue_tail(&ppp->file.xq, skb); - ppp_xmit_process(ppp); + if (!ppp_xmit_process(ppp)) + netif_stop_queue(dev); return NETDEV_TX_OK; outf: @@ -1048,10 +1048,11 @@ static void ppp_setup(struct net_device *dev) * Called to do any work queued up on the transmit side * that can now be done. */ -static void +static int ppp_xmit_process(struct ppp *ppp) { struct sk_buff *skb; + int ret = 0; ppp_xmit_lock(ppp); if (!ppp->closing) { @@ -1061,10 +1062,13 @@ ppp_xmit_process(struct ppp *ppp) ppp_send_frame(ppp, skb); /* If there's no work left to do, tell the core net code that we can accept some more. */ - if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq)) + if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq)) { netif_wake_queue(ppp->dev); + ret = 1; + } } ppp_xmit_unlock(ppp); + return ret; } static inline struct sk_buff * diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index a57f05726b57..91d25888a1b9 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -375,8 +375,8 @@ static void rionet_remove(struct rio_dev *rdev) struct net_device *ndev = rio_get_drvdata(rdev); struct rionet_peer *peer, *tmp; - free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ? - __fls(sizeof(void *)) + 4 : 0); + free_pages((unsigned long)rionet_active, get_order(sizeof(void *) * + RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size))); unregister_netdev(ndev); free_netdev(ndev); @@ -432,15 +432,16 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev) int rc = 0; struct rionet_private *rnet; u16 device_id; + const size_t rionet_active_bytes = sizeof(void *) * + RIO_MAX_ROUTE_ENTRIES(mport->sys_size); rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL, - mport->sys_size ? __fls(sizeof(void *)) + 4 : 0); + get_order(rionet_active_bytes)); if (!rionet_active) { rc = -ENOMEM; goto out; } - memset((void *)rionet_active, 0, sizeof(void *) * - RIO_MAX_ROUTE_ENTRIES(mport->sys_size)); + memset((void *)rionet_active, 0, rionet_active_bytes); /* Set up private area */ rnet = netdev_priv(ndev); diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index 3886b30ed373..3e41b00c6806 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -165,13 +165,13 @@ static void rx_complete(struct urb *req) memcpy(skb_put(skb, 1), page_address(page), 1); skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, 1, req->actual_length, - req->actual_length); + PAGE_SIZE); page = NULL; } } else { skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, 0, req->actual_length, - req->actual_length); + PAGE_SIZE); page = NULL; } if (req->actual_length < PAGE_SIZE) diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index 439690be519f..685a4e22c768 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -93,6 +93,7 @@ static int eem_bind(struct usbnet *dev, struct usb_interface *intf) /* no jumbogram (16K) support for now */ dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; } diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 6dda2fe5b15b..d363b31053da 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -85,32 +85,6 @@ #define INT_CRERR_CNT 0x06 #define INT_COL_CNT 0x07 -/* Transmit status register errors */ -#define TSR_ECOL (1<<5) -#define TSR_LCOL (1<<4) -#define TSR_LOSS_CRS (1<<3) -#define TSR_JBR (1<<2) -#define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR) -/* Receive status register errors */ -#define RSR_CRC (1<<2) -#define RSR_FAE (1<<1) -#define RSR_ERRORS (RSR_CRC | RSR_FAE) - -/* Media status register definitions */ -#define MSR_DUPLEX (1<<4) -#define MSR_SPEED (1<<3) -#define MSR_LINK (1<<2) - -/* Interrupt pipe data */ -#define INT_TSR 0x00 -#define INT_RSR 0x01 -#define INT_MSR 0x02 -#define INT_WAKSR 0x03 -#define INT_TXOK_CNT 0x04 -#define INT_RXLOST_CNT 0x05 -#define INT_CRERR_CNT 0x06 -#define INT_COL_CNT 0x07 - #define RTL8150_MTU 1540 #define RTL8150_TX_TIMEOUT (HZ) diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index c3197ce0e2ad..34db195fb8b0 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -337,6 +337,11 @@ static const struct usb_device_id products [] = { .driver_info = ZAURUS_PXA_INFO, }, { + /* Motorola Rokr E6 */ + USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &bogus_mdlm_info, +}, { /* Motorola MOTOMAGX phones */ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 019da012669f..4de2760c5937 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -625,12 +625,13 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev) /* This can happen with OOM and indirect buffers. */ if (unlikely(capacity < 0)) { - if (net_ratelimit()) { - if (likely(capacity == -ENOMEM)) { + if (likely(capacity == -ENOMEM)) { + if (net_ratelimit()) { dev_warn(&dev->dev, "TX queue failure: out of memory\n"); } else { - dev->stats.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; + if (net_ratelimit()) dev_warn(&dev->dev, "Unexpected TX queue failure: %d\n", capacity); diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 423eb26386c8..d70ede7a7f96 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -290,8 +290,8 @@ config FARSYNC Frame Relay or X.25/LAPB. If you want the module to be automatically loaded when the interface - is referenced then you should add "alias hdlcX farsync" to - /etc/modprobe.conf for each interface, where X is 0, 1, 2, ..., or + is referenced then you should add "alias hdlcX farsync" to a file + in /etc/modprobe.d/ for each interface, where X is 0, 1, 2, ..., or simply use "alias hdlc* farsync" to indicate all of them. To compile this driver as a module, choose M here: the diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c index 129ba36bd04d..4b66ab1d0e5c 100644 --- a/drivers/net/wimax/i2400m/debugfs.c +++ b/drivers/net/wimax/i2400m/debugfs.c @@ -53,17 +53,6 @@ struct dentry *debugfs_create_netdev_queue_stopped( &fops_netdev_queue_stopped); } - -/* - * inode->i_private has the @data argument to debugfs_create_file() - */ -static -int i2400m_stats_open(struct inode *inode, struct file *filp) -{ - filp->private_data = inode->i_private; - return 0; -} - /* * We don't allow partial reads of this file, as then the reader would * get weirdly confused data as it is updated. @@ -117,7 +106,7 @@ ssize_t i2400m_rx_stats_write(struct file *filp, const char __user *buffer, static const struct file_operations i2400m_rx_stats_fops = { .owner = THIS_MODULE, - .open = i2400m_stats_open, + .open = simple_open, .read = i2400m_rx_stats_read, .write = i2400m_rx_stats_write, .llseek = default_llseek, @@ -170,7 +159,7 @@ ssize_t i2400m_tx_stats_write(struct file *filp, const char __user *buffer, static const struct file_operations i2400m_tx_stats_fops = { .owner = THIS_MODULE, - .open = i2400m_stats_open, + .open = simple_open, .read = i2400m_tx_stats_read, .write = i2400m_tx_stats_write, .llseek = default_llseek, diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c index 63e4b709efa9..1d76ae855f07 100644 --- a/drivers/net/wimax/i2400m/netdev.c +++ b/drivers/net/wimax/i2400m/netdev.c @@ -597,7 +597,8 @@ static void i2400m_get_drvinfo(struct net_device *net_dev, struct i2400m *i2400m = net_dev_to_i2400m(net_dev); strncpy(info->driver, KBUILD_MODNAME, sizeof(info->driver) - 1); - strncpy(info->fw_version, i2400m->fw_name, sizeof(info->fw_version) - 1); + strncpy(info->fw_version, + i2400m->fw_name ? : "", sizeof(info->fw_version) - 1); if (net_dev->dev.parent) strncpy(info->bus_info, dev_name(net_dev->dev.parent), sizeof(info->bus_info) - 1); diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 2c1b8b687646..29b1e033a10b 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -339,6 +339,23 @@ int i2400mu_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt) return result; } +static void i2400mu_get_drvinfo(struct net_device *net_dev, + struct ethtool_drvinfo *info) +{ + struct i2400m *i2400m = net_dev_to_i2400m(net_dev); + struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); + struct usb_device *udev = i2400mu->usb_dev; + + strncpy(info->driver, KBUILD_MODNAME, sizeof(info->driver) - 1); + strncpy(info->fw_version, + i2400m->fw_name ? : "", sizeof(info->fw_version) - 1); + usb_make_path(udev, info->bus_info, sizeof(info->bus_info)); +} + +static const struct ethtool_ops i2400mu_ethtool_ops = { + .get_drvinfo = i2400mu_get_drvinfo, + .get_link = ethtool_op_get_link, +}; static void i2400mu_netdev_setup(struct net_device *net_dev) @@ -347,6 +364,7 @@ void i2400mu_netdev_setup(struct net_device *net_dev) struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); i2400mu_init(i2400mu); i2400m_netdev_setup(net_dev); + net_dev->ethtool_ops = &i2400mu_ethtool_ops; } diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c index 8c5ce8b0c734..e5e8f45d86ac 100644 --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -71,13 +71,6 @@ static unsigned int ath5k_debug; module_param_named(debug, ath5k_debug, uint, 0); -static int ath5k_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - - /* debugfs: registers */ struct reg { @@ -265,7 +258,7 @@ static ssize_t write_file_beacon(struct file *file, static const struct file_operations fops_beacon = { .read = read_file_beacon, .write = write_file_beacon, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -285,7 +278,7 @@ static ssize_t write_file_reset(struct file *file, static const struct file_operations fops_reset = { .write = write_file_reset, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = noop_llseek, }; @@ -365,7 +358,7 @@ static ssize_t write_file_debug(struct file *file, static const struct file_operations fops_debug = { .read = read_file_debug, .write = write_file_debug, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -477,7 +470,7 @@ static ssize_t write_file_antenna(struct file *file, static const struct file_operations fops_antenna = { .read = read_file_antenna, .write = write_file_antenna, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -532,7 +525,7 @@ static ssize_t read_file_misc(struct file *file, char __user *user_buf, static const struct file_operations fops_misc = { .read = read_file_misc, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, }; @@ -647,7 +640,7 @@ static ssize_t write_file_frameerrors(struct file *file, static const struct file_operations fops_frameerrors = { .read = read_file_frameerrors, .write = write_file_frameerrors, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -810,7 +803,7 @@ static ssize_t write_file_ani(struct file *file, static const struct file_operations fops_ani = { .read = read_file_ani, .write = write_file_ani, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -881,7 +874,7 @@ static ssize_t write_file_queue(struct file *file, static const struct file_operations fops_queue = { .read = read_file_queue, .write = write_file_queue, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c index 552adb3f80d0..d01403a263ff 100644 --- a/drivers/net/wireless/ath/ath6kl/debug.c +++ b/drivers/net/wireless/ath/ath6kl/debug.c @@ -217,12 +217,6 @@ void dump_cred_dist_stats(struct htc_target *target) target->credit_info->cur_free_credits); } -static int ath6kl_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - void ath6kl_debug_war(struct ath6kl *ar, enum ath6kl_war war) { switch (war) { @@ -263,7 +257,7 @@ static ssize_t read_file_war_stats(struct file *file, char __user *user_buf, static const struct file_operations fops_war_stats = { .read = read_file_war_stats, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -488,7 +482,7 @@ static ssize_t ath6kl_fwlog_mask_write(struct file *file, } static const struct file_operations fops_fwlog_mask = { - .open = ath6kl_debugfs_open, + .open = simple_open, .read = ath6kl_fwlog_mask_read, .write = ath6kl_fwlog_mask_write, .owner = THIS_MODULE, @@ -634,7 +628,7 @@ static ssize_t read_file_tgt_stats(struct file *file, char __user *user_buf, static const struct file_operations fops_tgt_stats = { .read = read_file_tgt_stats, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -699,7 +693,7 @@ static ssize_t read_file_credit_dist_stats(struct file *file, static const struct file_operations fops_credit_dist_stats = { .read = read_file_credit_dist_stats, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -802,7 +796,7 @@ static ssize_t ath6kl_endpoint_stats_write(struct file *file, } static const struct file_operations fops_endpoint_stats = { - .open = ath6kl_debugfs_open, + .open = simple_open, .read = ath6kl_endpoint_stats_read, .write = ath6kl_endpoint_stats_write, .owner = THIS_MODULE, @@ -875,7 +869,7 @@ static ssize_t ath6kl_regread_write(struct file *file, static const struct file_operations fops_diag_reg_read = { .read = ath6kl_regread_read, .write = ath6kl_regread_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -999,7 +993,7 @@ static ssize_t ath6kl_lrssi_roam_read(struct file *file, static const struct file_operations fops_lrssi_roam_threshold = { .read = ath6kl_lrssi_roam_read, .write = ath6kl_lrssi_roam_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1061,7 +1055,7 @@ static ssize_t ath6kl_regwrite_write(struct file *file, static const struct file_operations fops_diag_reg_write = { .read = ath6kl_regwrite_read, .write = ath6kl_regwrite_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1166,7 +1160,7 @@ static ssize_t ath6kl_roam_table_read(struct file *file, char __user *user_buf, static const struct file_operations fops_roam_table = { .read = ath6kl_roam_table_read, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1204,7 +1198,7 @@ static ssize_t ath6kl_force_roam_write(struct file *file, static const struct file_operations fops_force_roam = { .write = ath6kl_force_roam_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1244,7 +1238,7 @@ static ssize_t ath6kl_roam_mode_write(struct file *file, static const struct file_operations fops_roam_mode = { .write = ath6kl_roam_mode_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1286,7 +1280,7 @@ static ssize_t ath6kl_keepalive_write(struct file *file, } static const struct file_operations fops_keepalive = { - .open = ath6kl_debugfs_open, + .open = simple_open, .read = ath6kl_keepalive_read, .write = ath6kl_keepalive_write, .owner = THIS_MODULE, @@ -1331,7 +1325,7 @@ static ssize_t ath6kl_disconnect_timeout_write(struct file *file, } static const struct file_operations fops_disconnect_timeout = { - .open = ath6kl_debugfs_open, + .open = simple_open, .read = ath6kl_disconnect_timeout_read, .write = ath6kl_disconnect_timeout_write, .owner = THIS_MODULE, @@ -1512,7 +1506,7 @@ static ssize_t ath6kl_create_qos_write(struct file *file, static const struct file_operations fops_create_qos = { .write = ath6kl_create_qos_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1560,7 +1554,7 @@ static ssize_t ath6kl_delete_qos_write(struct file *file, static const struct file_operations fops_delete_qos = { .write = ath6kl_delete_qos_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1593,7 +1587,7 @@ static ssize_t ath6kl_bgscan_int_write(struct file *file, static const struct file_operations fops_bgscan_int = { .write = ath6kl_bgscan_int_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1651,7 +1645,7 @@ static ssize_t ath6kl_listen_int_read(struct file *file, static const struct file_operations fops_listen_int = { .read = ath6kl_listen_int_read, .write = ath6kl_listen_int_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1711,7 +1705,7 @@ static ssize_t ath6kl_power_params_write(struct file *file, static const struct file_operations fops_power_params = { .write = ath6kl_power_params_write, - .open = ath6kl_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index 2f4b48e6fb03..e5cceb077574 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -20,7 +20,6 @@ /* Common calibration code */ -#define ATH9K_NF_TOO_HIGH -60 static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer) { @@ -346,10 +345,10 @@ static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf) "NF calibrated [%s] [chain %d] is %d\n", (i >= 3 ? "ext" : "ctl"), i % 3, nf[i]); - if (nf[i] > ATH9K_NF_TOO_HIGH) { + if (nf[i] > limit->max) { ath_dbg(common, CALIBRATE, "NF[%d] (%d) > MAX (%d), correcting to MAX\n", - i, nf[i], ATH9K_NF_TOO_HIGH); + i, nf[i], limit->max); nf[i] = limit->max; } else if (nf[i] < limit->min) { ath_dbg(common, CALIBRATE, diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 35d1c8e91d1c..ff47b32ecaf4 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -26,11 +26,6 @@ #define REG_READ_D(_ah, _reg) \ ath9k_hw_common(_ah)->ops->read((_ah), (_reg)) -static int ath9k_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} static ssize_t ath9k_debugfs_read_buf(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -83,7 +78,7 @@ static ssize_t write_file_debug(struct file *file, const char __user *user_buf, static const struct file_operations fops_debug = { .read = read_file_debug, .write = write_file_debug, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -129,7 +124,7 @@ static ssize_t write_file_tx_chainmask(struct file *file, const char __user *use static const struct file_operations fops_tx_chainmask = { .read = read_file_tx_chainmask, .write = write_file_tx_chainmask, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -172,7 +167,7 @@ static ssize_t write_file_rx_chainmask(struct file *file, const char __user *use static const struct file_operations fops_rx_chainmask = { .read = read_file_rx_chainmask, .write = write_file_rx_chainmask, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -223,7 +218,7 @@ static ssize_t write_file_disable_ani(struct file *file, static const struct file_operations fops_disable_ani = { .read = read_file_disable_ani, .write = write_file_disable_ani, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -324,7 +319,7 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf, static const struct file_operations fops_dma = { .read = read_file_dma, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -446,7 +441,7 @@ static ssize_t read_file_interrupt(struct file *file, char __user *user_buf, static const struct file_operations fops_interrupt = { .read = read_file_interrupt, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -852,28 +847,28 @@ void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf, static const struct file_operations fops_xmit = { .read = read_file_xmit, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; static const struct file_operations fops_stations = { .read = read_file_stations, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; static const struct file_operations fops_misc = { .read = read_file_misc, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; static const struct file_operations fops_reset = { .read = read_file_reset, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1016,7 +1011,7 @@ void ath_debug_stat_rx(struct ath_softc *sc, struct ath_rx_status *rs) static const struct file_operations fops_recv = { .read = read_file_recv, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1055,7 +1050,7 @@ static ssize_t write_file_regidx(struct file *file, const char __user *user_buf, static const struct file_operations fops_regidx = { .read = read_file_regidx, .write = write_file_regidx, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1102,7 +1097,7 @@ static ssize_t write_file_regval(struct file *file, const char __user *user_buf, static const struct file_operations fops_regval = { .read = read_file_regval, .write = write_file_regval, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1191,7 +1186,7 @@ static ssize_t read_file_dump_nfcal(struct file *file, char __user *user_buf, static const struct file_operations fops_dump_nfcal = { .read = read_file_dump_nfcal, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1219,7 +1214,7 @@ static ssize_t read_file_base_eeprom(struct file *file, char __user *user_buf, static const struct file_operations fops_base_eeprom = { .read = read_file_base_eeprom, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -1247,7 +1242,7 @@ static ssize_t read_file_modal_eeprom(struct file *file, char __user *user_buf, static const struct file_operations fops_modal_eeprom = { .read = read_file_modal_eeprom, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/ath/ath9k/dfs_debug.c b/drivers/net/wireless/ath/ath9k/dfs_debug.c index 106d031d834a..4364c103ed33 100644 --- a/drivers/net/wireless/ath/ath9k/dfs_debug.c +++ b/drivers/net/wireless/ath/ath9k/dfs_debug.c @@ -60,16 +60,9 @@ static ssize_t read_file_dfs(struct file *file, char __user *user_buf, return retval; } -static int ath9k_dfs_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - - return 0; -} - static const struct file_operations fops_dfs_stats = { .read = read_file_dfs, - .open = ath9k_dfs_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_debug.c b/drivers/net/wireless/ath/ath9k/htc_drv_debug.c index d3ff33c71aa5..3035deb7a0cd 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_debug.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_debug.c @@ -16,12 +16,6 @@ #include "htc.h" -static int ath9k_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t read_file_tgt_int_stats(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -75,7 +69,7 @@ static ssize_t read_file_tgt_int_stats(struct file *file, char __user *user_buf, static const struct file_operations fops_tgt_int_stats = { .read = read_file_tgt_int_stats, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -145,7 +139,7 @@ static ssize_t read_file_tgt_tx_stats(struct file *file, char __user *user_buf, static const struct file_operations fops_tgt_tx_stats = { .read = read_file_tgt_tx_stats, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -191,7 +185,7 @@ static ssize_t read_file_tgt_rx_stats(struct file *file, char __user *user_buf, static const struct file_operations fops_tgt_rx_stats = { .read = read_file_tgt_rx_stats, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -243,7 +237,7 @@ static ssize_t read_file_xmit(struct file *file, char __user *user_buf, static const struct file_operations fops_xmit = { .read = read_file_xmit, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -364,7 +358,7 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, static const struct file_operations fops_recv = { .read = read_file_recv, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -399,7 +393,7 @@ static ssize_t read_file_slot(struct file *file, char __user *user_buf, static const struct file_operations fops_slot = { .read = read_file_slot, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -446,7 +440,7 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf, static const struct file_operations fops_queue = { .read = read_file_queue, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -487,7 +481,7 @@ static ssize_t write_file_debug(struct file *file, const char __user *user_buf, static const struct file_operations fops_debug = { .read = read_file_debug, .write = write_file_debug, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -636,7 +630,7 @@ static ssize_t read_file_base_eeprom(struct file *file, char __user *user_buf, static const struct file_operations fops_base_eeprom = { .read = read_file_base_eeprom, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -917,7 +911,7 @@ static ssize_t read_file_modal_eeprom(struct file *file, char __user *user_buf, static const struct file_operations fops_modal_eeprom = { .read = read_file_modal_eeprom, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 60159f4ee532..cb006458fc4b 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -680,7 +680,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->queues = 4; hw->max_rates = 4; hw->channel_change_time = 5000; - hw->max_listen_interval = 10; + hw->max_listen_interval = 1; hw->max_rate_tries = 10; hw->sta_data_size = sizeof(struct ath_node); hw->vif_data_size = sizeof(struct ath_vif); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 38794850f005..2504ab005589 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -118,15 +118,13 @@ void ath9k_ps_restore(struct ath_softc *sc) if (--sc->ps_usecount != 0) goto unlock; - if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) - goto unlock; - - if (sc->ps_idle) + if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK)) mode = ATH9K_PM_FULL_SLEEP; else if (sc->ps_enabled && !(sc->ps_flags & (PS_WAIT_FOR_BEACON | PS_WAIT_FOR_CAB | - PS_WAIT_FOR_PSPOLL_DATA))) + PS_WAIT_FOR_PSPOLL_DATA | + PS_WAIT_FOR_TX_ACK))) mode = ATH9K_PM_NETWORK_SLEEP; else goto unlock; @@ -640,7 +638,7 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta, an->sta = sta; an->vif = vif; - if (sta->ht_cap.ht_supported) { + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { ath_tx_node_init(sc, an); an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + sta->ht_cap.ampdu_factor); @@ -659,7 +657,7 @@ static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) an->sta = NULL; #endif - if (sta->ht_cap.ht_supported) + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) ath_tx_node_cleanup(sc, an); } diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 4f848493fece..08bb45532701 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1480,12 +1480,6 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband, #ifdef CONFIG_ATH9K_DEBUGFS -static int ath9k_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t read_file_rcstat(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -1553,7 +1547,7 @@ static ssize_t read_file_rcstat(struct file *file, char __user *user_buf, static const struct file_operations fops_rcstat = { .read = read_file_rcstat, - .open = ath9k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE }; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index f4ae3ba994a8..1c4583c7ff7c 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1913,13 +1913,13 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) if (sc->rx.frag) { int space = skb->len - skb_tailroom(hdr_skb); - sc->rx.frag = NULL; - if (pskb_expand_head(hdr_skb, 0, space, GFP_ATOMIC) < 0) { dev_kfree_skb(skb); goto requeue_drop_frag; } + sc->rx.frag = NULL; + skb_copy_from_linear_data(skb, skb_put(hdr_skb, skb->len), skb->len); dev_kfree_skb_any(skb); diff --git a/drivers/net/wireless/ath/carl9170/debug.c b/drivers/net/wireless/ath/carl9170/debug.c index 3c164226687f..93fe6003a493 100644 --- a/drivers/net/wireless/ath/carl9170/debug.c +++ b/drivers/net/wireless/ath/carl9170/debug.c @@ -48,11 +48,6 @@ #define ADD(buf, off, max, fmt, args...) \ off += snprintf(&buf[off], max - off, fmt, ##args); -static int carl9170_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} struct carl9170_debugfs_fops { unsigned int read_bufsize; @@ -178,7 +173,7 @@ static const struct carl9170_debugfs_fops carl_debugfs_##name ##_ops = {\ .attr = _attr, \ .req_dev_state = _dstate, \ .fops = { \ - .open = carl9170_debugfs_open, \ + .open = simple_open, \ .read = carl9170_debugfs_read, \ .write = carl9170_debugfs_write, \ .owner = THIS_MODULE \ diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index e751fdee89b2..e807bd930647 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -500,12 +500,6 @@ out: #undef fappend -static int b43_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t b43_debugfs_read(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { @@ -624,7 +618,7 @@ out_unlock: .read = _read, \ .write = _write, \ .fops = { \ - .open = b43_debugfs_open, \ + .open = simple_open, \ .read = b43_debugfs_read, \ .write = b43_debugfs_write, \ .llseek = generic_file_llseek, \ diff --git a/drivers/net/wireless/b43legacy/debugfs.c b/drivers/net/wireless/b43legacy/debugfs.c index 5e28ad0d6d17..1965edb765a2 100644 --- a/drivers/net/wireless/b43legacy/debugfs.c +++ b/drivers/net/wireless/b43legacy/debugfs.c @@ -197,12 +197,6 @@ static int restart_write_file(struct b43legacy_wldev *dev, const char *buf, size #undef fappend -static int b43legacy_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t b43legacy_debugfs_read(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { @@ -331,7 +325,7 @@ out_unlock: .read = _read, \ .write = _write, \ .fops = { \ - .open = b43legacy_debugfs_open, \ + .open = simple_open, \ .read = b43legacy_debugfs_read, \ .write = b43legacy_debugfs_write, \ .llseek = generic_file_llseek, \ diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 4fcdac63a300..2b022571a859 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11507,9 +11507,9 @@ static int ipw_wdev_init(struct net_device *dev) rc = -ENOMEM; goto out; } - /* translate geo->bg to a_band.channels */ + /* translate geo->a to a_band.channels */ for (i = 0; i < geo->a_channels; i++) { - a_band->channels[i].band = IEEE80211_BAND_2GHZ; + a_band->channels[i].band = IEEE80211_BAND_5GHZ; a_band->channels[i].center_freq = geo->a[i].freq; a_band->channels[i].hw_value = geo->a[i].channel; a_band->channels[i].max_power = geo->a[i].max_power; diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 0c1209390169..faec40467208 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -2673,8 +2673,6 @@ il3945_bg_restart(struct work_struct *data) if (test_and_clear_bit(S_FW_ERROR, &il->status)) { mutex_lock(&il->mutex); - /* FIXME: vif can be dereferenced */ - il->vif = NULL; il->is_open = 0; mutex_unlock(&il->mutex); il3945_down(il); diff --git a/drivers/net/wireless/iwlegacy/3945-rs.c b/drivers/net/wireless/iwlegacy/3945-rs.c index 70bee1a4d876..4b10157d8686 100644 --- a/drivers/net/wireless/iwlegacy/3945-rs.c +++ b/drivers/net/wireless/iwlegacy/3945-rs.c @@ -821,12 +821,6 @@ out: } #ifdef CONFIG_MAC80211_DEBUGFS -static int -il3945_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} static ssize_t il3945_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf, @@ -862,7 +856,7 @@ il3945_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf, static const struct file_operations rs_sta_dbgfs_stats_table_ops = { .read = il3945_sta_dbgfs_stats_table_read, - .open = il3945_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 17f1c6853182..c46275a92565 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5652,8 +5652,6 @@ il4965_bg_restart(struct work_struct *data) if (test_and_clear_bit(S_FW_ERROR, &il->status)) { mutex_lock(&il->mutex); - /* FIXME: do we dereference vif without mutex locked ? */ - il->vif = NULL; il->is_open = 0; __il4965_down(il); diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index d7e2856e41d3..11ab1247fae1 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -2518,12 +2518,6 @@ il4965_rs_free_sta(void *il_r, struct ieee80211_sta *sta, void *il_sta) } #ifdef CONFIG_MAC80211_DEBUGFS -static int -il4965_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} static void il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx) @@ -2695,7 +2689,7 @@ il4965_rs_sta_dbgfs_scale_table_read(struct file *file, char __user *user_buf, static const struct file_operations rs_sta_dbgfs_scale_table_ops = { .write = il4965_rs_sta_dbgfs_scale_table_write, .read = il4965_rs_sta_dbgfs_scale_table_read, - .open = il4965_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -2740,7 +2734,7 @@ il4965_rs_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf, static const struct file_operations rs_sta_dbgfs_stats_table_ops = { .read = il4965_rs_sta_dbgfs_stats_table_read, - .open = il4965_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -2768,7 +2762,7 @@ il4965_rs_sta_dbgfs_rate_scale_data_read(struct file *file, static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { .read = il4965_rs_sta_dbgfs_rate_scale_data_read, - .open = il4965_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index e5ac04739bcc..eaf249452e51 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -4508,6 +4508,7 @@ il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct il_priv *il = hw->priv; int err; + bool reset; mutex_lock(&il->mutex); D_MAC80211("enter: type %d, addr %pM\n", vif->type, vif->addr); @@ -4518,7 +4519,12 @@ il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) goto out; } - if (il->vif) { + /* + * We do not support multiple virtual interfaces, but on hardware reset + * we have to add the same interface again. + */ + reset = (il->vif == vif); + if (il->vif && !reset) { err = -EOPNOTSUPP; goto out; } @@ -4528,8 +4534,11 @@ il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) err = il_set_mode(il); if (err) { - il->vif = NULL; - il->iw_mode = NL80211_IFTYPE_STATION; + IL_WARN("Fail to set mode %d\n", vif->type); + if (!reset) { + il->vif = NULL; + il->iw_mode = NL80211_IFTYPE_STATION; + } } out: @@ -5279,9 +5288,9 @@ il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, D_MAC80211("BSSID %pM\n", bss_conf->bssid); /* - * If there is currently a HW scan going on in the - * background then we need to cancel it else the RXON - * below/in post_associate will fail. + * If there is currently a HW scan going on in the background, + * then we need to cancel it, otherwise sometimes we are not + * able to authenticate (FIXME: why ?) */ if (il_scan_cancel_timeout(il, 100)) { D_MAC80211("leave - scan abort failed\n"); @@ -5290,14 +5299,10 @@ il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } /* mac80211 only sets assoc when in STATION mode */ - if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) { - memcpy(il->staging.bssid_addr, bss_conf->bssid, - ETH_ALEN); + memcpy(il->staging.bssid_addr, bss_conf->bssid, ETH_ALEN); - /* currently needed in a few places */ - memcpy(il->bssid, bss_conf->bssid, ETH_ALEN); - } else - il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; + /* FIXME: currently needed in a few places */ + memcpy(il->bssid, bss_conf->bssid, ETH_ALEN); } /* diff --git a/drivers/net/wireless/iwlegacy/debug.c b/drivers/net/wireless/iwlegacy/debug.c index 229849150aac..eff26501d60a 100644 --- a/drivers/net/wireless/iwlegacy/debug.c +++ b/drivers/net/wireless/iwlegacy/debug.c @@ -160,18 +160,12 @@ static ssize_t il_dbgfs_##name##_write(struct file *file, \ const char __user *user_buf, \ size_t count, loff_t *ppos); -static int -il_dbgfs_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} #define DEBUGFS_READ_FILE_OPS(name) \ DEBUGFS_READ_FUNC(name); \ static const struct file_operations il_dbgfs_##name##_ops = { \ .read = il_dbgfs_##name##_read, \ - .open = il_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -179,7 +173,7 @@ static const struct file_operations il_dbgfs_##name##_ops = { \ DEBUGFS_WRITE_FUNC(name); \ static const struct file_operations il_dbgfs_##name##_ops = { \ .write = il_dbgfs_##name##_write, \ - .open = il_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -189,7 +183,7 @@ static const struct file_operations il_dbgfs_##name##_ops = { \ static const struct file_operations il_dbgfs_##name##_ops = { \ .write = il_dbgfs_##name##_write, \ .read = il_dbgfs_##name##_read, \ - .open = il_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 53f8c51cfcdb..7e590b349dd7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -3083,11 +3083,6 @@ static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta, } #ifdef CONFIG_MAC80211_DEBUGFS -static int open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, u32 *rate_n_flags, int index) { @@ -3226,7 +3221,7 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, static const struct file_operations rs_sta_dbgfs_scale_table_ops = { .write = rs_sta_dbgfs_scale_table_write, .read = rs_sta_dbgfs_scale_table_read, - .open = open_file_generic, + .open = simple_open, .llseek = default_llseek, }; static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, @@ -3269,7 +3264,7 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, static const struct file_operations rs_sta_dbgfs_stats_table_ops = { .read = rs_sta_dbgfs_stats_table_read, - .open = open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -3295,7 +3290,7 @@ static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { .read = rs_sta_dbgfs_rate_scale_data_read, - .open = open_file_generic, + .open = simple_open, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index b7b1c04f2fba..2bbaebd99ad4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -84,17 +84,11 @@ static ssize_t iwl_dbgfs_##name##_write(struct file *file, \ size_t count, loff_t *ppos); -static int iwl_dbgfs_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - #define DEBUGFS_READ_FILE_OPS(name) \ DEBUGFS_READ_FUNC(name); \ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .read = iwl_dbgfs_##name##_read, \ - .open = iwl_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -102,7 +96,7 @@ static const struct file_operations iwl_dbgfs_##name##_ops = { \ DEBUGFS_WRITE_FUNC(name); \ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .write = iwl_dbgfs_##name##_write, \ - .open = iwl_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -113,7 +107,7 @@ static const struct file_operations iwl_dbgfs_##name##_ops = { \ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .write = iwl_dbgfs_##name##_write, \ .read = iwl_dbgfs_##name##_read, \ - .open = iwl_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c index b4f796c82e1e..4d7b30d3e648 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c @@ -1898,17 +1898,11 @@ static ssize_t iwl_dbgfs_##name##_write(struct file *file, \ size_t count, loff_t *ppos); -static int iwl_dbgfs_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - #define DEBUGFS_READ_FILE_OPS(name) \ DEBUGFS_READ_FUNC(name); \ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .read = iwl_dbgfs_##name##_read, \ - .open = iwl_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -1916,7 +1910,7 @@ static const struct file_operations iwl_dbgfs_##name##_ops = { \ DEBUGFS_WRITE_FUNC(name); \ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .write = iwl_dbgfs_##name##_write, \ - .open = iwl_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -1926,7 +1920,7 @@ static const struct file_operations iwl_dbgfs_##name##_ops = { \ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .write = iwl_dbgfs_##name##_write, \ .read = iwl_dbgfs_##name##_read, \ - .open = iwl_dbgfs_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c index 87eef5773a02..b6199d124bb9 100644 --- a/drivers/net/wireless/iwmc3200wifi/debugfs.c +++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c @@ -99,12 +99,6 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_iwm_dbg_modules, iwm_debugfs_u32_read, iwm_debugfs_dbg_modules_write, "%llu\n"); -static int iwm_generic_open(struct inode *inode, struct file *filp) -{ - filp->private_data = inode->i_private; - return 0; -} - static ssize_t iwm_debugfs_txq_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) @@ -401,28 +395,28 @@ out: static const struct file_operations iwm_debugfs_txq_fops = { .owner = THIS_MODULE, - .open = iwm_generic_open, + .open = simple_open, .read = iwm_debugfs_txq_read, .llseek = default_llseek, }; static const struct file_operations iwm_debugfs_tx_credit_fops = { .owner = THIS_MODULE, - .open = iwm_generic_open, + .open = simple_open, .read = iwm_debugfs_tx_credit_read, .llseek = default_llseek, }; static const struct file_operations iwm_debugfs_rx_ticket_fops = { .owner = THIS_MODULE, - .open = iwm_generic_open, + .open = simple_open, .read = iwm_debugfs_rx_ticket_read, .llseek = default_llseek, }; static const struct file_operations iwm_debugfs_fw_err_fops = { .owner = THIS_MODULE, - .open = iwm_generic_open, + .open = simple_open, .read = iwm_debugfs_fw_err_read, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c index 764b40dd24ad..0042f204b07f 100644 --- a/drivers/net/wireless/iwmc3200wifi/sdio.c +++ b/drivers/net/wireless/iwmc3200wifi/sdio.c @@ -264,13 +264,6 @@ static int if_sdio_send_chunk(struct iwm_priv *iwm, u8 *buf, int count) return ret; } -/* debugfs hooks */ -static int iwm_debugfs_sdio_open(struct inode *inode, struct file *filp) -{ - filp->private_data = inode->i_private; - return 0; -} - static ssize_t iwm_debugfs_sdio_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) { @@ -363,7 +356,7 @@ err: static const struct file_operations iwm_debugfs_sdio_fops = { .owner = THIS_MODULE, - .open = iwm_debugfs_sdio_open, + .open = simple_open, .read = iwm_debugfs_sdio_read, .llseek = default_llseek, }; diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c index c192671610fc..a06cc283e23d 100644 --- a/drivers/net/wireless/libertas/debugfs.c +++ b/drivers/net/wireless/libertas/debugfs.c @@ -21,12 +21,6 @@ static char *szStates[] = { static void lbs_debug_init(struct lbs_private *priv); #endif -static int open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t write_file_dummy(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -696,7 +690,7 @@ out_unlock: #define FOPS(fread, fwrite) { \ .owner = THIS_MODULE, \ - .open = open_file_generic, \ + .open = simple_open, \ .read = (fread), \ .write = (fwrite), \ .llseek = generic_file_llseek, \ @@ -962,7 +956,7 @@ static ssize_t lbs_debugfs_write(struct file *f, const char __user *buf, static const struct file_operations lbs_debug_fops = { .owner = THIS_MODULE, - .open = open_file_generic, + .open = simple_open, .write = lbs_debugfs_write, .read = lbs_debugfs_read, .llseek = default_llseek, diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c index d26a78b6b3c4..1a845074c52a 100644 --- a/drivers/net/wireless/mwifiex/debugfs.c +++ b/drivers/net/wireless/mwifiex/debugfs.c @@ -140,18 +140,6 @@ static struct mwifiex_debug_data items[] = { static int num_of_items = ARRAY_SIZE(items); /* - * Generic proc file open handler. - * - * This function is called every time a file is accessed for read or write. - */ -static int -mwifiex_open_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -/* * Proc info file read handler. * * This function is called when the 'info' file is opened for reading. @@ -676,19 +664,19 @@ done: static const struct file_operations mwifiex_dfs_##name##_fops = { \ .read = mwifiex_##name##_read, \ .write = mwifiex_##name##_write, \ - .open = mwifiex_open_generic, \ + .open = simple_open, \ }; #define MWIFIEX_DFS_FILE_READ_OPS(name) \ static const struct file_operations mwifiex_dfs_##name##_fops = { \ .read = mwifiex_##name##_read, \ - .open = mwifiex_open_generic, \ + .open = simple_open, \ }; #define MWIFIEX_DFS_FILE_WRITE_OPS(name) \ static const struct file_operations mwifiex_dfs_##name##_fops = { \ .write = mwifiex_##name##_write, \ - .open = mwifiex_open_generic, \ + .open = simple_open, \ }; diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index dd6c64ac406e..88e3ad2d1db8 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -1336,6 +1336,10 @@ static void qbuf_scan(struct orinoco_private *priv, void *buf, unsigned long flags; sd = kmalloc(sizeof(*sd), GFP_ATOMIC); + if (!sd) { + printk(KERN_ERR "%s: failed to alloc memory\n", __func__); + return; + } sd->buf = buf; sd->len = len; sd->type = type; @@ -1353,6 +1357,10 @@ static void qabort_scan(struct orinoco_private *priv) unsigned long flags; sd = kmalloc(sizeof(*sd), GFP_ATOMIC); + if (!sd) { + printk(KERN_ERR "%s: failed to alloc memory\n", __func__); + return; + } sd->len = -1; /* Abort */ spin_lock_irqsave(&priv->scan_lock, flags); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index cd490abced91..001735f7a661 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -163,7 +163,13 @@ static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev, /* Reschedule urb to read TX status again instantly */ return true; - } else if (rt2800usb_txstatus_pending(rt2x00dev)) { + } + + /* Check if there is any entry that timedout waiting on TX status */ + if (rt2800usb_txstatus_timeout(rt2x00dev)) + queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work); + + if (rt2800usb_txstatus_pending(rt2x00dev)) { /* Read register after 250 us */ hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 250000), HRTIMER_MODE_REL); @@ -178,7 +184,7 @@ stop_reading: * here again if status reading is needed. */ if (rt2800usb_txstatus_pending(rt2x00dev) && - test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags)) + !test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags)) return true; else return false; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index fc9901e027c1..90cc5e772650 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1062,11 +1062,6 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags); - /* - * Register the extra components. - */ - rt2x00rfkill_register(rt2x00dev); - return 0; } @@ -1210,6 +1205,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00link_register(rt2x00dev); rt2x00leds_register(rt2x00dev); rt2x00debug_register(rt2x00dev); + rt2x00rfkill_register(rt2x00dev); return 0; diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 510023554e5f..e54488db0e10 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -838,7 +838,10 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw, __le16 fc = hdr->frame_control; txrate = ieee80211_get_tx_rate(hw, info); - tcb_desc->hw_rate = txrate->hw_value; + if (txrate) + tcb_desc->hw_rate = txrate->hw_value; + else + tcb_desc->hw_rate = 0; if (ieee80211_is_data(fc)) { /* diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 07dd38efe62a..288b035a3579 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -912,8 +912,13 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw) memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc)); ring = &rtlpci->tx_ring[BEACON_QUEUE]; pskb = __skb_dequeue(&ring->queue); - if (pskb) + if (pskb) { + struct rtl_tx_desc *entry = &ring->desc[ring->idx]; + pci_unmap_single(rtlpci->pdev, rtlpriv->cfg->ops->get_desc( + (u8 *) entry, true, HW_DESC_TXBUFF_ADDR), + pskb->len, PCI_DMA_TODEVICE); kfree_skb(pskb); + } /*NB: the beacon data buffer must be 32-bit aligned. */ pskb = ieee80211_beacon_get(hw, mac->vif); diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c index 1eec3a06d1f3..4c016241f340 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c +++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c @@ -1893,7 +1893,7 @@ void rtl92c_phy_set_io(struct ieee80211_hw *hw) break; case IO_CMD_PAUSE_DM_BY_SCAN: rtlphy->initgain_backup.xaagccore1 = dm_digtable.cur_igvalue; - dm_digtable.cur_igvalue = 0x17; + dm_digtable.cur_igvalue = 0x37; rtl92c_dm_write_dig(hw); break; default: diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c index 34591eeb8376..28fc5fb8057b 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c @@ -3077,7 +3077,7 @@ static void rtl92d_phy_set_io(struct ieee80211_hw *hw) break; case IO_CMD_PAUSE_DM_BY_SCAN: rtlphy->initgain_backup.xaagccore1 = de_digtable.cur_igvalue; - de_digtable.cur_igvalue = 0x17; + de_digtable.cur_igvalue = 0x37; rtl92d_dm_write_dig(hw); break; default: diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c index 4898c502974d..480862c07f92 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c @@ -91,7 +91,6 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw) u8 tid; struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); - static int header_print; rtlpriv->dm.dm_initialgain_enable = true; rtlpriv->dm.dm_flag = 0; @@ -171,10 +170,6 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw) for (tid = 0; tid < 8; tid++) skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]); - /* Only load firmware for first MAC */ - if (header_print) - return 0; - /* for firmware buf */ rtlpriv->rtlhal.pfirmware = vzalloc(0x8000); if (!rtlpriv->rtlhal.pfirmware) { @@ -186,7 +181,6 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw) rtlpriv->max_fw_size = 0x8000; pr_info("Driver for Realtek RTL8192DE WLAN interface\n"); pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name); - header_print++; /* request fw */ err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name, diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 2e1e352864bb..d04dbda13f5a 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -124,46 +124,38 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request, return status; } -static u32 _usb_read_sync(struct usb_device *udev, u32 addr, u16 len) +static u32 _usb_read_sync(struct rtl_priv *rtlpriv, u32 addr, u16 len) { + struct device *dev = rtlpriv->io.dev; + struct usb_device *udev = to_usb_device(dev); u8 request; u16 wvalue; u16 index; - u32 *data; - u32 ret; + __le32 *data = &rtlpriv->usb_data[rtlpriv->usb_data_index]; - data = kmalloc(sizeof(u32), GFP_KERNEL); - if (!data) - return -ENOMEM; request = REALTEK_USB_VENQT_CMD_REQ; index = REALTEK_USB_VENQT_CMD_IDX; /* n/a */ wvalue = (u16)addr; _usbctrl_vendorreq_sync_read(udev, request, wvalue, index, data, len); - ret = le32_to_cpu(*data); - kfree(data); - return ret; + if (++rtlpriv->usb_data_index >= RTL_USB_MAX_RX_COUNT) + rtlpriv->usb_data_index = 0; + return le32_to_cpu(*data); } static u8 _usb_read8_sync(struct rtl_priv *rtlpriv, u32 addr) { - struct device *dev = rtlpriv->io.dev; - - return (u8)_usb_read_sync(to_usb_device(dev), addr, 1); + return (u8)_usb_read_sync(rtlpriv, addr, 1); } static u16 _usb_read16_sync(struct rtl_priv *rtlpriv, u32 addr) { - struct device *dev = rtlpriv->io.dev; - - return (u16)_usb_read_sync(to_usb_device(dev), addr, 2); + return (u16)_usb_read_sync(rtlpriv, addr, 2); } static u32 _usb_read32_sync(struct rtl_priv *rtlpriv, u32 addr) { - struct device *dev = rtlpriv->io.dev; - - return _usb_read_sync(to_usb_device(dev), addr, 4); + return _usb_read_sync(rtlpriv, addr, 4); } static void _usb_write_async(struct usb_device *udev, u32 addr, u32 val, @@ -955,6 +947,11 @@ int __devinit rtl_usb_probe(struct usb_interface *intf, return -ENOMEM; } rtlpriv = hw->priv; + rtlpriv->usb_data = kzalloc(RTL_USB_MAX_RX_COUNT * sizeof(u32), + GFP_KERNEL); + if (!rtlpriv->usb_data) + return -ENOMEM; + rtlpriv->usb_data_index = 0; init_completion(&rtlpriv->firmware_loading_complete); SET_IEEE80211_DEV(hw, &intf->dev); udev = interface_to_usbdev(intf); @@ -1025,6 +1022,7 @@ void rtl_usb_disconnect(struct usb_interface *intf) /* rtl_deinit_rfkill(hw); */ rtl_usb_deinit(hw); rtl_deinit_core(hw); + kfree(rtlpriv->usb_data); rtlpriv->cfg->ops->deinit_sw_leds(hw); rtlpriv->cfg->ops->deinit_sw_vars(hw); _rtl_usb_io_handler_release(hw); diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index b591614c3b9b..28ebc69218a3 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -67,7 +67,7 @@ #define QOS_QUEUE_NUM 4 #define RTL_MAC80211_NUM_QUEUE 5 #define REALTEK_USB_VENQT_MAX_BUF_SIZE 254 - +#define RTL_USB_MAX_RX_COUNT 100 #define QBSS_LOAD_SIZE 5 #define MAX_WMMELE_LENGTH 64 @@ -1629,6 +1629,10 @@ struct rtl_priv { interface or hardware */ unsigned long status; + /* data buffer pointer for USB reads */ + __le32 *usb_data; + int usb_data_index; + /*This must be the last item so that it points to the data allocated beyond this structure like: diff --git a/drivers/net/wireless/wl1251/debugfs.c b/drivers/net/wireless/wl1251/debugfs.c index 6c274007d200..448da1f8c22f 100644 --- a/drivers/net/wireless/wl1251/debugfs.c +++ b/drivers/net/wireless/wl1251/debugfs.c @@ -47,7 +47,7 @@ static ssize_t name## _read(struct file *file, char __user *userbuf, \ \ static const struct file_operations name## _ops = { \ .read = name## _read, \ - .open = wl1251_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -84,7 +84,7 @@ static ssize_t sub## _ ##name## _read(struct file *file, \ \ static const struct file_operations sub## _ ##name## _ops = { \ .read = sub## _ ##name## _read, \ - .open = wl1251_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -117,12 +117,6 @@ out: mutex_unlock(&wl->mutex); } -static int wl1251_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u"); DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u"); @@ -235,7 +229,7 @@ static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf, static const struct file_operations tx_queue_len_ops = { .read = tx_queue_len_read, - .open = wl1251_open_file_generic, + .open = simple_open, .llseek = generic_file_llseek, }; @@ -257,7 +251,7 @@ static ssize_t tx_queue_status_read(struct file *file, char __user *userbuf, static const struct file_operations tx_queue_status_ops = { .read = tx_queue_status_read, - .open = wl1251_open_file_generic, + .open = simple_open, .llseek = generic_file_llseek, }; diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c index e1cf72765965..564d49575c94 100644 --- a/drivers/net/wireless/wl12xx/debugfs.c +++ b/drivers/net/wireless/wl12xx/debugfs.c @@ -63,7 +63,7 @@ static ssize_t name## _read(struct file *file, char __user *userbuf, \ \ static const struct file_operations name## _ops = { \ .read = name## _read, \ - .open = wl1271_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -96,7 +96,7 @@ static ssize_t sub## _ ##name## _read(struct file *file, \ \ static const struct file_operations sub## _ ##name## _ops = { \ .read = sub## _ ##name## _read, \ - .open = wl1271_open_file_generic, \ + .open = simple_open, \ .llseek = generic_file_llseek, \ }; @@ -126,12 +126,6 @@ out: mutex_unlock(&wl->mutex); } -static int wl1271_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, "%u"); DEBUGFS_FWSTATS_FILE(rx, out_of_mem, "%u"); @@ -243,7 +237,7 @@ static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf, static const struct file_operations tx_queue_len_ops = { .read = tx_queue_len_read, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -289,7 +283,7 @@ static ssize_t gpio_power_write(struct file *file, static const struct file_operations gpio_power_ops = { .read = gpio_power_read, .write = gpio_power_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -308,7 +302,7 @@ static ssize_t start_recovery_write(struct file *file, static const struct file_operations start_recovery_ops = { .write = start_recovery_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -372,7 +366,7 @@ out: static const struct file_operations dynamic_ps_timeout_ops = { .read = dynamic_ps_timeout_read, .write = dynamic_ps_timeout_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -441,7 +435,7 @@ out: static const struct file_operations forced_ps_ops = { .read = forced_ps_read, .write = forced_ps_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -483,7 +477,7 @@ static ssize_t split_scan_timeout_write(struct file *file, static const struct file_operations split_scan_timeout_ops = { .read = split_scan_timeout_read, .write = split_scan_timeout_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -566,7 +560,7 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf, static const struct file_operations driver_state_ops = { .read = driver_state_read, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -675,7 +669,7 @@ static ssize_t vifs_state_read(struct file *file, char __user *user_buf, static const struct file_operations vifs_state_ops = { .read = vifs_state_read, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -733,7 +727,7 @@ static ssize_t dtim_interval_write(struct file *file, static const struct file_operations dtim_interval_ops = { .read = dtim_interval_read, .write = dtim_interval_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -791,7 +785,7 @@ static ssize_t suspend_dtim_interval_write(struct file *file, static const struct file_operations suspend_dtim_interval_ops = { .read = suspend_dtim_interval_read, .write = suspend_dtim_interval_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -849,7 +843,7 @@ static ssize_t beacon_interval_write(struct file *file, static const struct file_operations beacon_interval_ops = { .read = beacon_interval_read, .write = beacon_interval_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -904,7 +898,7 @@ static ssize_t rx_streaming_interval_read(struct file *file, static const struct file_operations rx_streaming_interval_ops = { .read = rx_streaming_interval_read, .write = rx_streaming_interval_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -959,7 +953,7 @@ static ssize_t rx_streaming_always_read(struct file *file, static const struct file_operations rx_streaming_always_ops = { .read = rx_streaming_always_read, .write = rx_streaming_always_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; @@ -1003,7 +997,7 @@ out: static const struct file_operations beacon_filtering_ops = { .write = beacon_filtering_write, - .open = wl1271_open_file_generic, + .open = simple_open, .llseek = default_llseek, }; diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 663b32c2e931..0ebbb1906c30 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1965,7 +1965,7 @@ static int __init netif_init(void) if (xen_initial_domain()) return 0; - if (!xen_platform_pci_unplug) + if (xen_hvm_domain() && !xen_platform_pci_unplug) return -ENODEV; printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n"); diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c index ee8fd037bb53..849357c1045c 100644 --- a/drivers/oprofile/oprofilefs.c +++ b/drivers/oprofile/oprofilefs.c @@ -117,25 +117,17 @@ static ssize_t ulong_write_file(struct file *file, char const __user *buf, size_ } -static int default_open(struct inode *inode, struct file *filp) -{ - if (inode->i_private) - filp->private_data = inode->i_private; - return 0; -} - - static const struct file_operations ulong_fops = { .read = ulong_read_file, .write = ulong_write_file, - .open = default_open, + .open = simple_open, .llseek = default_llseek, }; static const struct file_operations ulong_ro_fops = { .read = ulong_read_file, - .open = default_open, + .open = simple_open, .llseek = default_llseek, }; @@ -187,7 +179,7 @@ static ssize_t atomic_read_file(struct file *file, char __user *buf, size_t coun static const struct file_operations atomic_ro_fops = { .read = atomic_read_file, - .open = default_open, + .open = simple_open, .llseek = default_llseek, }; diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 060fd22a1103..0f150f271c2a 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -277,40 +277,6 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) return 0; } -/** - * acpi_dev_run_wake - Enable/disable wake-up for given device. - * @phys_dev: Device to enable/disable the platform to wake-up the system for. - * @enable: Whether enable or disable the wake-up functionality. - * - * Find the ACPI device object corresponding to @pci_dev and try to - * enable/disable the GPE associated with it. - */ -static int acpi_dev_run_wake(struct device *phys_dev, bool enable) -{ - struct acpi_device *dev; - acpi_handle handle; - - if (!device_run_wake(phys_dev)) - return -EINVAL; - - handle = DEVICE_ACPI_HANDLE(phys_dev); - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { - dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", - __func__); - return -ENODEV; - } - - if (enable) { - acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); - acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - } else { - acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - acpi_disable_wakeup_device_power(dev); - } - - return 0; -} - static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) { while (bus->parent) { @@ -318,14 +284,14 @@ static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) if (bridge->pme_interrupt) return; - if (!acpi_dev_run_wake(&bridge->dev, enable)) + if (!acpi_pm_device_run_wake(&bridge->dev, enable)) return; bus = bus->parent; } /* We have reached the root bus. */ if (bus->bridge) - acpi_dev_run_wake(bus->bridge, enable); + acpi_pm_device_run_wake(bus->bridge, enable); } static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) @@ -333,7 +299,7 @@ static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) if (dev->pme_interrupt) return 0; - if (!acpi_dev_run_wake(&dev->dev, enable)) + if (!acpi_pm_device_run_wake(&dev->dev, enable)) return 0; acpi_pci_propagate_run_wake(dev->bus, enable); diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 4bdef24cd412..b500840a143b 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -508,9 +508,6 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) int pos; u32 reg32; - if (aspm_disabled) - return 0; - /* * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot @@ -519,6 +516,16 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) pos = pci_pcie_cap(child); if (!pos) return -EINVAL; + + /* + * If ASPM is disabled then we're not going to change + * the BIOS state. It's safe to continue even if it's a + * pre-1.1 device + */ + + if (aspm_disabled) + continue; + /* * Disable ASPM for pre-1.1 PCIe device, we follow MS to use * RBER bit to determine if a function is 1.1 version device diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index fd00ff02ab4d..d6cc62cb4cf7 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -290,6 +290,7 @@ static int pci_frontend_enable_msix(struct pci_dev *dev, } else { printk(KERN_DEBUG "enable msix get value %x\n", op.value); + err = op.value; } } else { dev_err(&dev->dev, "enable msix get err %x\n", err); diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 88a98cff5a44..f7ba316e0ed6 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -609,25 +609,16 @@ static bool mcp_exceeded(struct ips_driver *ips) bool ret = false; u32 temp_limit; u32 avg_power; - const char *msg = "MCP limit exceeded: "; spin_lock_irqsave(&ips->turbo_status_lock, flags); temp_limit = ips->mcp_temp_limit * 100; - if (ips->mcp_avg_temp > temp_limit) { - dev_info(&ips->dev->dev, - "%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp, - temp_limit); + if (ips->mcp_avg_temp > temp_limit) ret = true; - } avg_power = ips->cpu_avg_power + ips->mch_avg_power; - if (avg_power > ips->mcp_power_limit) { - dev_info(&ips->dev->dev, - "%sAvg power %u, limit %u\n", msg, avg_power, - ips->mcp_power_limit); + if (avg_power > ips->mcp_power_limit) ret = true; - } spin_unlock_irqrestore(&ips->turbo_status_lock, flags); diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index b00c17612a89..d21e8f59c84e 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -321,9 +321,14 @@ static int __init acpi_pnp_match(struct device *dev, void *_pnp) { struct acpi_device *acpi = to_acpi_device(dev); struct pnp_dev *pnp = _pnp; + struct device *physical_device; + + physical_device = acpi_get_physical_device(acpi->handle); + if (physical_device) + put_device(physical_device); /* true means it matched */ - return !acpi_get_physical_device(acpi->handle) + return !physical_device && compare_pnp_id(pnp->id, acpi_device_hid(acpi)); } diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 459f66437fe9..99dc29f2f2f2 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -249,7 +249,7 @@ config CHARGER_TWL4030 Say Y here to enable support for TWL4030 Battery Charge Interface. config CHARGER_LP8727 - tristate "National Semiconductor LP8727 charger driver" + tristate "TI/National Semiconductor LP8727 charger driver" depends on I2C help Say Y here to enable support for LP8727 Charger Driver. @@ -288,4 +288,23 @@ config CHARGER_MAX8998 Say Y to enable support for the battery charger control sysfs and platform data of MAX8998/LP3974 PMICs. +config CHARGER_SMB347 + tristate "Summit Microelectronics SMB347 Battery Charger" + depends on I2C + help + Say Y to include support for Summit Microelectronics SMB347 + Battery Charger. + +config AB8500_BM + bool "AB8500 Battery Management Driver" + depends on AB8500_CORE && AB8500_GPADC + help + Say Y to include support for AB5500 battery management. + +config AB8500_BATTERY_THERM_ON_BATCTRL + bool "Thermistor connected on BATCTRL ADC" + depends on AB8500_BM + help + Say Y to enable battery temperature measurements using + thermistor connected on BATCTRL ADC. endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index c590fa533406..b6b243416c0e 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o +obj-$(CONFIG_AB8500_BM) += ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o @@ -42,3 +43,4 @@ obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o +obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c new file mode 100644 index 000000000000..d8bb99394ac0 --- /dev/null +++ b/drivers/power/ab8500_btemp.c @@ -0,0 +1,1124 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Battery temperature driver for AB8500 + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/completion.h> +#include <linux/workqueue.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/jiffies.h> + +#define VTVOUT_V 1800 + +#define BTEMP_THERMAL_LOW_LIMIT -10 +#define BTEMP_THERMAL_MED_LIMIT 0 +#define BTEMP_THERMAL_HIGH_LIMIT_52 52 +#define BTEMP_THERMAL_HIGH_LIMIT_57 57 +#define BTEMP_THERMAL_HIGH_LIMIT_62 62 + +#define BTEMP_BATCTRL_CURR_SRC_7UA 7 +#define BTEMP_BATCTRL_CURR_SRC_20UA 20 + +#define to_ab8500_btemp_device_info(x) container_of((x), \ + struct ab8500_btemp, btemp_psy); + +/** + * struct ab8500_btemp_interrupts - ab8500 interrupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_btemp_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +struct ab8500_btemp_events { + bool batt_rem; + bool btemp_high; + bool btemp_medhigh; + bool btemp_lowmed; + bool btemp_low; + bool ac_conn; + bool usb_conn; +}; + +struct ab8500_btemp_ranges { + int btemp_high_limit; + int btemp_med_limit; + int btemp_low_limit; +}; + +/** + * struct ab8500_btemp - ab8500 BTEMP device information + * @dev: Pointer to the structure device + * @node: List of AB8500 BTEMPs, hence prepared for reentrance + * @curr_source: What current source we use, in uA + * @bat_temp: Battery temperature in degree Celcius + * @prev_bat_temp Last dispatched battery temperature + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @fg: Pointer to the struct fg + * @pdata: Pointer to the abx500_btemp platform data + * @bat: Pointer to the abx500_bm platform data + * @btemp_psy: Structure for BTEMP specific battery properties + * @events: Structure for information about events triggered + * @btemp_ranges: Battery temperature range structure + * @btemp_wq: Work queue for measuring the temperature periodically + * @btemp_periodic_work: Work for measuring the temperature periodically + */ +struct ab8500_btemp { + struct device *dev; + struct list_head node; + int curr_source; + int bat_temp; + int prev_bat_temp; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct ab8500_fg *fg; + struct abx500_btemp_platform_data *pdata; + struct abx500_bm_data *bat; + struct power_supply btemp_psy; + struct ab8500_btemp_events events; + struct ab8500_btemp_ranges btemp_ranges; + struct workqueue_struct *btemp_wq; + struct delayed_work btemp_periodic_work; +}; + +/* BTEMP power supply properties */ +static enum power_supply_property ab8500_btemp_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_TEMP, +}; + +static LIST_HEAD(ab8500_btemp_list); + +/** + * ab8500_btemp_get() - returns a reference to the primary AB8500 BTEMP + * (i.e. the first BTEMP in the instance list) + */ +struct ab8500_btemp *ab8500_btemp_get(void) +{ + struct ab8500_btemp *btemp; + btemp = list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node); + + return btemp; +} + +/** + * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance + * @di: pointer to the ab8500_btemp structure + * @v_batctrl: measured batctrl voltage + * @inst_curr: measured instant current + * + * This function returns the battery resistance that is + * derived from the BATCTRL voltage. + * Returns value in Ohms. + */ +static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, + int v_batctrl, int inst_curr) +{ + int rbs; + + if (is_ab8500_1p1_or_earlier(di->parent)) { + /* + * For ABB cut1.0 and 1.1 BAT_CTRL is internally + * connected to 1.8V through a 450k resistor + */ + return (450000 * (v_batctrl)) / (1800 - v_batctrl); + } + + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) { + /* + * If the battery has internal NTC, we use the current + * source to calculate the resistance, 7uA or 20uA + */ + rbs = (v_batctrl * 1000 + - di->bat->gnd_lift_resistance * inst_curr) + / di->curr_source; + } else { + /* + * BAT_CTRL is internally + * connected to 1.8V through a 80k resistor + */ + rbs = (80000 * (v_batctrl)) / (1800 - v_batctrl); + } + + return rbs; +} + +/** + * ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage + * @di: pointer to the ab8500_btemp structure + * + * This function returns the voltage on BATCTRL. Returns value in mV. + */ +static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di) +{ + int vbtemp; + static int prev; + + vbtemp = ab8500_gpadc_convert(di->gpadc, BAT_CTRL); + if (vbtemp < 0) { + dev_err(di->dev, + "%s gpadc conversion failed, using previous value", + __func__); + return prev; + } + prev = vbtemp; + return vbtemp; +} + +/** + * ab8500_btemp_curr_source_enable() - enable/disable batctrl current source + * @di: pointer to the ab8500_btemp structure + * @enable: enable or disable the current source + * + * Enable or disable the current sources for the BatCtrl AD channel + */ +static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, + bool enable) +{ + int curr; + int ret = 0; + + /* + * BATCTRL current sources are included on AB8500 cut2.0 + * and future versions + */ + if (is_ab8500_1p1_or_earlier(di->parent)) + return 0; + + /* Only do this for batteries with internal NTC */ + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) + curr = BAT_CTRL_7U_ENA; + else + curr = BAT_CTRL_20U_ENA; + + dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed setting cmp_force\n", + __func__); + return ret; + } + + /* + * We have to wait one 32kHz cycle before enabling + * the current source, since ForceBatCtrlCmpHigh needs + * to be written in a separate cycle + */ + udelay(32); + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH | curr); + if (ret) { + dev_err(di->dev, "%s failed enabling current source\n", + __func__); + goto disable_curr_source; + } + } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { + dev_dbg(di->dev, "Disable BATCTRL curr source\n"); + + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, + ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + if (ret) { + dev_err(di->dev, "%s failed disabling current source\n", + __func__); + goto disable_curr_source; + } + + /* Enable Pull-Up and comparator */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA); + if (ret) { + dev_err(di->dev, "%s failed enabling PU and comp\n", + __func__); + goto enable_pu_comp; + } + + /* + * We have to wait one 32kHz cycle before disabling + * ForceBatCtrlCmpHigh since this needs to be written + * in a separate cycle + */ + udelay(32); + + /* Disable 'force comparator' */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed disabling force comp\n", + __func__); + goto disable_force_comp; + } + } + return ret; + + /* + * We have to try unsetting FORCE_BAT_CTRL_CMP_HIGH one more time + * if we got an error above + */ +disable_curr_source: + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, + ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + if (ret) { + dev_err(di->dev, "%s failed disabling current source\n", + __func__); + return ret; + } +enable_pu_comp: + /* Enable Pull-Up and comparator */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA); + if (ret) { + dev_err(di->dev, "%s failed enabling PU and comp\n", + __func__); + return ret; + } + +disable_force_comp: + /* + * We have to wait one 32kHz cycle before disabling + * ForceBatCtrlCmpHigh since this needs to be written + * in a separate cycle + */ + udelay(32); + + /* Disable 'force comparator' */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed disabling force comp\n", + __func__); + return ret; + } + + return ret; +} + +/** + * ab8500_btemp_get_batctrl_res() - get battery resistance + * @di: pointer to the ab8500_btemp structure + * + * This function returns the battery pack identification resistance. + * Returns value in Ohms. + */ +static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) +{ + int ret; + int batctrl = 0; + int res; + int inst_curr; + int i; + + /* + * BATCTRL current sources are included on AB8500 cut2.0 + * and future versions + */ + ret = ab8500_btemp_curr_source_enable(di, true); + if (ret) { + dev_err(di->dev, "%s curr source enabled failed\n", __func__); + return ret; + } + + if (!di->fg) + di->fg = ab8500_fg_get(); + if (!di->fg) { + dev_err(di->dev, "No fg found\n"); + return -EINVAL; + } + + ret = ab8500_fg_inst_curr_start(di->fg); + + if (ret) { + dev_err(di->dev, "Failed to start current measurement\n"); + return ret; + } + + /* + * Since there is no interrupt when current measurement is done, + * loop for over 250ms (250ms is one sample conversion time + * with 32.768 Khz RTC clock). Note that a stop time must be set + * since the ab8500_btemp_read_batctrl_voltage call can block and + * take an unknown amount of time to complete. + */ + i = 0; + + do { + batctrl += ab8500_btemp_read_batctrl_voltage(di); + i++; + msleep(20); + } while (!ab8500_fg_inst_curr_done(di->fg)); + batctrl /= i; + + ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr); + if (ret) { + dev_err(di->dev, "Failed to finalize current measurement\n"); + return ret; + } + + res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr); + + ret = ab8500_btemp_curr_source_enable(di, false); + if (ret) { + dev_err(di->dev, "%s curr source disable failed\n", __func__); + return ret; + } + + dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n", + __func__, batctrl, res, inst_curr, i); + + return res; +} + +/** + * ab8500_btemp_res_to_temp() - resistance to temperature + * @di: pointer to the ab8500_btemp structure + * @tbl: pointer to the resiatance to temperature table + * @tbl_size: size of the resistance to temperature table + * @res: resistance to calculate the temperature from + * + * This function returns the battery temperature in degrees Celcius + * based on the NTC resistance. + */ +static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di, + const struct abx500_res_to_temp *tbl, int tbl_size, int res) +{ + int i, temp; + /* + * Calculate the formula for the straight line + * Simple interpolation if we are within + * the resistance table limits, extrapolate + * if resistance is outside the limits. + */ + if (res > tbl[0].resist) + i = 0; + else if (res <= tbl[tbl_size - 1].resist) + i = tbl_size - 2; + else { + i = 0; + while (!(res <= tbl[i].resist && + res > tbl[i + 1].resist)) + i++; + } + + temp = tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) * + (res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist); + return temp; +} + +/** + * ab8500_btemp_measure_temp() - measure battery temperature + * @di: pointer to the ab8500_btemp structure + * + * Returns battery temperature (on success) else the previous temperature + */ +static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) +{ + int temp; + static int prev; + int rbat, rntc, vntc; + u8 id; + + id = di->bat->batt_id; + + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && + id != BATTERY_UNKNOWN) { + + rbat = ab8500_btemp_get_batctrl_res(di); + if (rbat < 0) { + dev_err(di->dev, "%s get batctrl res failed\n", + __func__); + /* + * Return out-of-range temperature so that + * charging is stopped + */ + return BTEMP_THERMAL_LOW_LIMIT; + } + + temp = ab8500_btemp_res_to_temp(di, + di->bat->bat_type[id].r_to_t_tbl, + di->bat->bat_type[id].n_temp_tbl_elements, rbat); + } else { + vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL); + if (vntc < 0) { + dev_err(di->dev, + "%s gpadc conversion failed," + " using previous value\n", __func__); + return prev; + } + /* + * The PCB NTC is sourced from VTVOUT via a 230kOhm + * resistor. + */ + rntc = 230000 * vntc / (VTVOUT_V - vntc); + + temp = ab8500_btemp_res_to_temp(di, + di->bat->bat_type[id].r_to_t_tbl, + di->bat->bat_type[id].n_temp_tbl_elements, rntc); + prev = temp; + } + dev_dbg(di->dev, "Battery temperature is %d\n", temp); + return temp; +} + +/** + * ab8500_btemp_id() - Identify the connected battery + * @di: pointer to the ab8500_btemp structure + * + * This function will try to identify the battery by reading the ID + * resistor. Some brands use a combined ID resistor with a NTC resistor to + * both be able to identify and to read the temperature of it. + */ +static int ab8500_btemp_id(struct ab8500_btemp *di) +{ + int res; + u8 i; + + di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; + di->bat->batt_id = BATTERY_UNKNOWN; + + res = ab8500_btemp_get_batctrl_res(di); + if (res < 0) { + dev_err(di->dev, "%s get batctrl res failed\n", __func__); + return -ENXIO; + } + + /* BATTERY_UNKNOWN is defined on position 0, skip it! */ + for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) { + if ((res <= di->bat->bat_type[i].resis_high) && + (res >= di->bat->bat_type[i].resis_low)) { + dev_dbg(di->dev, "Battery detected on %s" + " low %d < res %d < high: %d" + " index: %d\n", + di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ? + "BATCTRL" : "BATTEMP", + di->bat->bat_type[i].resis_low, res, + di->bat->bat_type[i].resis_high, i); + + di->bat->batt_id = i; + break; + } + } + + if (di->bat->batt_id == BATTERY_UNKNOWN) { + dev_warn(di->dev, "Battery identified as unknown" + ", resistance %d Ohm\n", res); + return -ENXIO; + } + + /* + * We only have to change current source if the + * detected type is Type 1, else we use the 7uA source + */ + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && + di->bat->batt_id == 1) { + dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; + } + + return di->bat->batt_id; +} + +/** + * ab8500_btemp_periodic_work() - Measuring the temperature periodically + * @work: pointer to the work_struct structure + * + * Work function for measuring the temperature periodically + */ +static void ab8500_btemp_periodic_work(struct work_struct *work) +{ + int interval; + struct ab8500_btemp *di = container_of(work, + struct ab8500_btemp, btemp_periodic_work.work); + + di->bat_temp = ab8500_btemp_measure_temp(di); + + if (di->bat_temp != di->prev_bat_temp) { + di->prev_bat_temp = di->bat_temp; + power_supply_changed(&di->btemp_psy); + } + + if (di->events.ac_conn || di->events.usb_conn) + interval = di->bat->temp_interval_chg; + else + interval = di->bat->temp_interval_nochg; + + /* Schedule a new measurement */ + queue_delayed_work(di->btemp_wq, + &di->btemp_periodic_work, + round_jiffies(interval * HZ)); +} + +/** + * ab8500_btemp_batctrlindb_handler() - battery removal detected + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + dev_err(di->dev, "Battery removal detected!\n"); + + di->events.batt_rem = true; + power_supply_changed(&di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_templow_handler() - battery temp lower than 10 degrees + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + if (is_ab8500_2p0_or_earlier(di->parent)) { + dev_dbg(di->dev, "Ignore false btemp low irq" + " for ABB cut 1.0, 1.1 and 2.0\n"); + } else { + dev_crit(di->dev, "Battery temperature lower than -10deg c\n"); + + di->events.btemp_low = true; + di->events.btemp_high = false; + di->events.btemp_medhigh = false; + di->events.btemp_lowmed = false; + power_supply_changed(&di->btemp_psy); + } + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_temphigh_handler() - battery temp higher than max temp + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_crit(di->dev, "Battery temperature is higher than MAX temp\n"); + + di->events.btemp_high = true; + di->events.btemp_medhigh = false; + di->events.btemp_lowmed = false; + di->events.btemp_low = false; + power_supply_changed(&di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_lowmed_handler() - battery temp between low and medium + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_dbg(di->dev, "Battery temperature is between low and medium\n"); + + di->events.btemp_lowmed = true; + di->events.btemp_medhigh = false; + di->events.btemp_high = false; + di->events.btemp_low = false; + power_supply_changed(&di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_medhigh_handler() - battery temp between medium and high + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_dbg(di->dev, "Battery temperature is between medium and high\n"); + + di->events.btemp_medhigh = true; + di->events.btemp_lowmed = false; + di->events.btemp_high = false; + di->events.btemp_low = false; + power_supply_changed(&di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_periodic() - Periodic temperature measurements + * @di: pointer to the ab8500_btemp structure + * @enable: enable or disable periodic temperature measurements + * + * Starts of stops periodic temperature measurements. Periodic measurements + * should only be done when a charger is connected. + */ +static void ab8500_btemp_periodic(struct ab8500_btemp *di, + bool enable) +{ + dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n", + enable); + /* + * Make sure a new measurement is done directly by cancelling + * any pending work + */ + cancel_delayed_work_sync(&di->btemp_periodic_work); + + if (enable) + queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0); +} + +/** + * ab8500_btemp_get_temp() - get battery temperature + * @di: pointer to the ab8500_btemp structure + * + * Returns battery temperature + */ +static int ab8500_btemp_get_temp(struct ab8500_btemp *di) +{ + int temp = 0; + + /* + * The BTEMP events are not reliabe on AB8500 cut2.0 + * and prior versions + */ + if (is_ab8500_2p0_or_earlier(di->parent)) { + temp = di->bat_temp * 10; + } else { + if (di->events.btemp_low) { + if (temp > di->btemp_ranges.btemp_low_limit) + temp = di->btemp_ranges.btemp_low_limit; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_high) { + if (temp < di->btemp_ranges.btemp_high_limit) + temp = di->btemp_ranges.btemp_high_limit; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_lowmed) { + if (temp > di->btemp_ranges.btemp_med_limit) + temp = di->btemp_ranges.btemp_med_limit; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_medhigh) { + if (temp < di->btemp_ranges.btemp_med_limit) + temp = di->btemp_ranges.btemp_med_limit; + else + temp = di->bat_temp * 10; + } else + temp = di->bat_temp * 10; + } + return temp; +} + +/** + * ab8500_btemp_get_batctrl_temp() - get the temperature + * @btemp: pointer to the btemp structure + * + * Returns the batctrl temperature in millidegrees + */ +int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) +{ + return btemp->bat_temp * 1000; +} + +/** + * ab8500_btemp_get_property() - get the btemp properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the btemp + * properties by reading the sysfs files. + * online: presence of the battery + * present: presence of the battery + * technology: battery technology + * temp: battery temperature + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_btemp_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_btemp *di; + + di = to_ab8500_btemp_device_info(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + case POWER_SUPPLY_PROP_ONLINE: + if (di->events.batt_rem) + val->intval = 0; + else + val->intval = 1; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = di->bat->bat_type[di->bat->batt_id].name; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = ab8500_btemp_get_temp(di); + break; + default: + return -EINVAL; + } + return 0; +} + +static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_btemp *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + + psy = (struct power_supply *)data; + ext = dev_get_drvdata(dev); + di = to_ab8500_btemp_device_info(psy); + + /* + * For all psy where the name of your driver + * appears in any supplied_to + */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + if (ext->get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + switch (ext->type) { + case POWER_SUPPLY_TYPE_MAINS: + /* AC disconnected */ + if (!ret.intval && di->events.ac_conn) { + di->events.ac_conn = false; + } + /* AC connected */ + else if (ret.intval && !di->events.ac_conn) { + di->events.ac_conn = true; + if (!di->events.usb_conn) + ab8500_btemp_periodic(di, true); + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB disconnected */ + if (!ret.intval && di->events.usb_conn) { + di->events.usb_conn = false; + } + /* USB connected */ + else if (ret.intval && !di->events.usb_conn) { + di->events.usb_conn = true; + if (!di->events.ac_conn) + ab8500_btemp_periodic(di, true); + } + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_btemp_external_power_changed() - callback for power supply changes + * @psy: pointer to the structure power_supply + * + * This function is pointing to the function pointer external_power_changed + * of the structure power_supply. + * This function gets executed when there is a change in the external power + * supply to the btemp. + */ +static void ab8500_btemp_external_power_changed(struct power_supply *psy) +{ + struct ab8500_btemp *di = to_ab8500_btemp_device_info(psy); + + class_for_each_device(power_supply_class, NULL, + &di->btemp_psy, ab8500_btemp_get_ext_psy_data); +} + +/* ab8500 btemp driver interrupts and their respective isr */ +static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = { + {"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler}, + {"BTEMP_LOW", ab8500_btemp_templow_handler}, + {"BTEMP_HIGH", ab8500_btemp_temphigh_handler}, + {"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler}, + {"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler}, +}; + +#if defined(CONFIG_PM) +static int ab8500_btemp_resume(struct platform_device *pdev) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + + ab8500_btemp_periodic(di, true); + + return 0; +} + +static int ab8500_btemp_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + + ab8500_btemp_periodic(di, false); + + return 0; +} +#else +#define ab8500_btemp_suspend NULL +#define ab8500_btemp_resume NULL +#endif + +static int __devexit ab8500_btemp_remove(struct platform_device *pdev) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + int i, irq; + + /* Disable interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + free_irq(irq, di); + } + + /* Delete the work queue */ + destroy_workqueue(di->btemp_wq); + + flush_scheduled_work(); + power_supply_unregister(&di->btemp_psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + + return 0; +} + +static int __devinit ab8500_btemp_probe(struct platform_device *pdev) +{ + int irq, i, ret = 0; + u8 val; + struct abx500_bm_plat_data *plat_data; + + struct ab8500_btemp *di = + kzalloc(sizeof(struct ab8500_btemp), GFP_KERNEL); + if (!di) + return -ENOMEM; + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* get btemp specific platform data */ + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->btemp; + if (!di->pdata) { + dev_err(di->dev, "no btemp platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* get battery specific platform data */ + di->bat = plat_data->battery; + if (!di->bat) { + dev_err(di->dev, "no battery platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* BTEMP supply */ + di->btemp_psy.name = "ab8500_btemp"; + di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY; + di->btemp_psy.properties = ab8500_btemp_props; + di->btemp_psy.num_properties = ARRAY_SIZE(ab8500_btemp_props); + di->btemp_psy.get_property = ab8500_btemp_get_property; + di->btemp_psy.supplied_to = di->pdata->supplied_to; + di->btemp_psy.num_supplicants = di->pdata->num_supplicants; + di->btemp_psy.external_power_changed = + ab8500_btemp_external_power_changed; + + + /* Create a work queue for the btemp */ + di->btemp_wq = + create_singlethread_workqueue("ab8500_btemp_wq"); + if (di->btemp_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for measuring temperature periodically */ + INIT_DELAYED_WORK_DEFERRABLE(&di->btemp_periodic_work, + ab8500_btemp_periodic_work); + + /* Identify the battery */ + if (ab8500_btemp_id(di) < 0) + dev_warn(di->dev, "failed to identify the battery\n"); + + /* Set BTEMP thermal limits. Low and Med are fixed */ + di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT; + di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_BTEMP_HIGH_TH, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + goto free_btemp_wq; + } + switch (val) { + case BTEMP_HIGH_TH_57_0: + case BTEMP_HIGH_TH_57_1: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_57; + break; + case BTEMP_HIGH_TH_52: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_52; + break; + case BTEMP_HIGH_TH_62: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_62; + break; + } + + /* Register BTEMP power supply class */ + ret = power_supply_register(di->dev, &di->btemp_psy); + if (ret) { + dev_err(di->dev, "failed to register BTEMP psy\n"); + goto free_btemp_wq; + } + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_btemp_irq[i].name, di); + + if (ret) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_btemp_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_btemp_irq[i].name, irq, ret); + } + + platform_set_drvdata(pdev, di); + + /* Kick off periodic temperature measurements */ + ab8500_btemp_periodic(di, true); + list_add_tail(&di->node, &ab8500_btemp_list); + + return ret; + +free_irq: + power_supply_unregister(&di->btemp_psy); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + free_irq(irq, di); + } +free_btemp_wq: + destroy_workqueue(di->btemp_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver ab8500_btemp_driver = { + .probe = ab8500_btemp_probe, + .remove = __devexit_p(ab8500_btemp_remove), + .suspend = ab8500_btemp_suspend, + .resume = ab8500_btemp_resume, + .driver = { + .name = "ab8500-btemp", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_btemp_init(void) +{ + return platform_driver_register(&ab8500_btemp_driver); +} + +static void __exit ab8500_btemp_exit(void) +{ + platform_driver_unregister(&ab8500_btemp_driver); +} + +subsys_initcall_sync(ab8500_btemp_init); +module_exit(ab8500_btemp_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); +MODULE_ALIAS("platform:ab8500-btemp"); +MODULE_DESCRIPTION("AB8500 battery temperature driver"); diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c new file mode 100644 index 000000000000..e2b4accbec88 --- /dev/null +++ b/drivers/power/ab8500_charger.c @@ -0,0 +1,2789 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Charger driver for AB8500 + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/completion.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/workqueue.h> +#include <linux/kobject.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/mfd/abx500/ux500_chargalg.h> +#include <linux/usb/otg.h> + +/* Charger constants */ +#define NO_PW_CONN 0 +#define AC_PW_CONN 1 +#define USB_PW_CONN 2 + +#define MAIN_WDOG_ENA 0x01 +#define MAIN_WDOG_KICK 0x02 +#define MAIN_WDOG_DIS 0x00 +#define CHARG_WD_KICK 0x01 +#define MAIN_CH_ENA 0x01 +#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 +#define USB_CH_ENA 0x01 +#define USB_CHG_NO_OVERSHOOT_ENA_N 0x02 +#define MAIN_CH_DET 0x01 +#define MAIN_CH_CV_ON 0x04 +#define USB_CH_CV_ON 0x08 +#define VBUS_DET_DBNC100 0x02 +#define VBUS_DET_DBNC1 0x01 +#define OTP_ENABLE_WD 0x01 + +#define MAIN_CH_INPUT_CURR_SHIFT 4 +#define VBUS_IN_CURR_LIM_SHIFT 4 + +#define LED_INDICATOR_PWM_ENA 0x01 +#define LED_INDICATOR_PWM_DIS 0x00 +#define LED_IND_CUR_5MA 0x04 +#define LED_INDICATOR_PWM_DUTY_252_256 0xBF + +/* HW failure constants */ +#define MAIN_CH_TH_PROT 0x02 +#define VBUS_CH_NOK 0x08 +#define USB_CH_TH_PROT 0x02 +#define VBUS_OVV_TH 0x01 +#define MAIN_CH_NOK 0x01 +#define VBUS_DET 0x80 + +/* UsbLineStatus register bit masks */ +#define AB8500_USB_LINK_STATUS 0x78 +#define AB8500_STD_HOST_SUSP 0x18 + +/* Watchdog timeout constant */ +#define WD_TIMER 0x30 /* 4min */ +#define WD_KICK_INTERVAL (60 * HZ) + +/* Lowest charger voltage is 3.39V -> 0x4E */ +#define LOW_VOLT_REG 0x4E + +/* UsbLineStatus register - usb types */ +enum ab8500_charger_link_status { + USB_STAT_NOT_CONFIGURED, + USB_STAT_STD_HOST_NC, + USB_STAT_STD_HOST_C_NS, + USB_STAT_STD_HOST_C_S, + USB_STAT_HOST_CHG_NM, + USB_STAT_HOST_CHG_HS, + USB_STAT_HOST_CHG_HS_CHIRP, + USB_STAT_DEDICATED_CHG, + USB_STAT_ACA_RID_A, + USB_STAT_ACA_RID_B, + USB_STAT_ACA_RID_C_NM, + USB_STAT_ACA_RID_C_HS, + USB_STAT_ACA_RID_C_HS_CHIRP, + USB_STAT_HM_IDGND, + USB_STAT_RESERVED, + USB_STAT_NOT_VALID_LINK, +}; + +enum ab8500_usb_state { + AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */ + AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */ + AB8500_BM_USB_STATE_CONFIGURED, + AB8500_BM_USB_STATE_SUSPEND, + AB8500_BM_USB_STATE_RESUME, + AB8500_BM_USB_STATE_MAX, +}; + +/* VBUS input current limits supported in AB8500 in mA */ +#define USB_CH_IP_CUR_LVL_0P05 50 +#define USB_CH_IP_CUR_LVL_0P09 98 +#define USB_CH_IP_CUR_LVL_0P19 193 +#define USB_CH_IP_CUR_LVL_0P29 290 +#define USB_CH_IP_CUR_LVL_0P38 380 +#define USB_CH_IP_CUR_LVL_0P45 450 +#define USB_CH_IP_CUR_LVL_0P5 500 +#define USB_CH_IP_CUR_LVL_0P6 600 +#define USB_CH_IP_CUR_LVL_0P7 700 +#define USB_CH_IP_CUR_LVL_0P8 800 +#define USB_CH_IP_CUR_LVL_0P9 900 +#define USB_CH_IP_CUR_LVL_1P0 1000 +#define USB_CH_IP_CUR_LVL_1P1 1100 +#define USB_CH_IP_CUR_LVL_1P3 1300 +#define USB_CH_IP_CUR_LVL_1P4 1400 +#define USB_CH_IP_CUR_LVL_1P5 1500 + +#define VBAT_TRESH_IP_CUR_RED 3800 + +#define to_ab8500_charger_usb_device_info(x) container_of((x), \ + struct ab8500_charger, usb_chg) +#define to_ab8500_charger_ac_device_info(x) container_of((x), \ + struct ab8500_charger, ac_chg) + +/** + * struct ab8500_charger_interrupts - ab8500 interupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_charger_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +struct ab8500_charger_info { + int charger_connected; + int charger_online; + int charger_voltage; + int cv_active; + bool wd_expired; +}; + +struct ab8500_charger_event_flags { + bool mainextchnotok; + bool main_thermal_prot; + bool usb_thermal_prot; + bool vbus_ovv; + bool usbchargernotok; + bool chgwdexp; + bool vbus_collapse; +}; + +struct ab8500_charger_usb_state { + bool usb_changed; + int usb_current; + enum ab8500_usb_state state; + spinlock_t usb_lock; +}; + +/** + * struct ab8500_charger - ab8500 Charger device information + * @dev: Pointer to the structure device + * @max_usb_in_curr: Max USB charger input current + * @vbus_detected: VBUS detected + * @vbus_detected_start: + * VBUS detected during startup + * @ac_conn: This will be true when the AC charger has been plugged + * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC + * charger is enabled + * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB + * charger is enabled + * @vbat Battery voltage + * @old_vbat Previously measured battery voltage + * @autopower Indicate if we should have automatic pwron after pwrloss + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @pdata: Pointer to the abx500_charger platform data + * @bat: Pointer to the abx500_bm platform data + * @flags: Structure for information about events triggered + * @usb_state: Structure for usb stack information + * @ac_chg: AC charger power supply + * @usb_chg: USB charger power supply + * @ac: Structure that holds the AC charger properties + * @usb: Structure that holds the USB charger properties + * @regu: Pointer to the struct regulator + * @charger_wq: Work queue for the IRQs and checking HW state + * @check_vbat_work Work for checking vbat threshold to adjust vbus current + * @check_hw_failure_work: Work for checking HW state + * @check_usbchgnotok_work: Work for checking USB charger not ok status + * @kick_wd_work: Work for kicking the charger watchdog in case + * of ABB rev 1.* due to the watchog logic bug + * @ac_work: Work for checking AC charger connection + * @detect_usb_type_work: Work for detecting the USB type connected + * @usb_link_status_work: Work for checking the new USB link status + * @usb_state_changed_work: Work for checking USB state + * @check_main_thermal_prot_work: + * Work for checking Main thermal status + * @check_usb_thermal_prot_work: + * Work for checking USB thermal status + */ +struct ab8500_charger { + struct device *dev; + int max_usb_in_curr; + bool vbus_detected; + bool vbus_detected_start; + bool ac_conn; + bool vddadc_en_ac; + bool vddadc_en_usb; + int vbat; + int old_vbat; + bool autopower; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct abx500_charger_platform_data *pdata; + struct abx500_bm_data *bat; + struct ab8500_charger_event_flags flags; + struct ab8500_charger_usb_state usb_state; + struct ux500_charger ac_chg; + struct ux500_charger usb_chg; + struct ab8500_charger_info ac; + struct ab8500_charger_info usb; + struct regulator *regu; + struct workqueue_struct *charger_wq; + struct delayed_work check_vbat_work; + struct delayed_work check_hw_failure_work; + struct delayed_work check_usbchgnotok_work; + struct delayed_work kick_wd_work; + struct work_struct ac_work; + struct work_struct detect_usb_type_work; + struct work_struct usb_link_status_work; + struct work_struct usb_state_changed_work; + struct work_struct check_main_thermal_prot_work; + struct work_struct check_usb_thermal_prot_work; + struct usb_phy *usb_phy; + struct notifier_block nb; +}; + +/* AC properties */ +static enum power_supply_property ab8500_charger_ac_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +/* USB properties */ +static enum power_supply_property ab8500_charger_usb_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +/** + * ab8500_power_loss_handling - set how we handle powerloss. + * @di: pointer to the ab8500_charger structure + * + * Magic nummbers are from STE HW department. + */ +static void ab8500_power_loss_handling(struct ab8500_charger *di) +{ + u8 reg; + int ret; + + dev_dbg(di->dev, "Autopower : %d\n", di->autopower); + + /* read the autopower register */ + ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, ®); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + /* enable the OPT emulation registers */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + if (di->autopower) + reg |= 0x8; + else + reg &= ~0x8; + + /* write back the changed value to autopower reg */ + ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + /* disable the set OTP registers again */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } +} + +/** + * ab8500_power_supply_changed - a wrapper with local extentions for + * power_supply_changed + * @di: pointer to the ab8500_charger structure + * @psy: pointer to power_supply_that have changed. + * + */ +static void ab8500_power_supply_changed(struct ab8500_charger *di, + struct power_supply *psy) +{ + if (di->pdata->autopower_cfg) { + if (!di->usb.charger_connected && + !di->ac.charger_connected && + di->autopower) { + di->autopower = false; + ab8500_power_loss_handling(di); + } else if (!di->autopower && + (di->ac.charger_connected || + di->usb.charger_connected)) { + di->autopower = true; + ab8500_power_loss_handling(di); + } + } + power_supply_changed(psy); +} + +static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, + bool connected) +{ + if (connected != di->usb.charger_connected) { + dev_dbg(di->dev, "USB connected:%i\n", connected); + di->usb.charger_connected = connected; + sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present"); + } +} + +/** + * ab8500_charger_get_ac_voltage() - get ac charger voltage + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger voltage (on success) + */ +static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) +{ + int vch; + + /* Only measure voltage if the charger is connected */ + if (di->ac.charger_connected) { + vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); + if (vch < 0) + dev_err(di->dev, "%s gpadc conv failed,\n", __func__); + } else { + vch = 0; + } + return vch; +} + +/** + * ab8500_charger_ac_cv() - check if the main charger is in CV mode + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger CV mode (on success) else error code + */ +static int ab8500_charger_ac_cv(struct ab8500_charger *di) +{ + u8 val; + int ret = 0; + + /* Only check CV mode if the charger is online */ + if (di->ac.charger_online) { + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_STATUS1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return 0; + } + + if (val & MAIN_CH_CV_ON) + ret = 1; + else + ret = 0; + } + + return ret; +} + +/** + * ab8500_charger_get_vbus_voltage() - get vbus voltage + * @di: pointer to the ab8500_charger structure + * + * This function returns the vbus voltage. + * Returns vbus voltage (on success) + */ +static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) +{ + int vch; + + /* Only measure voltage if the charger is connected */ + if (di->usb.charger_connected) { + vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); + if (vch < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + vch = 0; + } + return vch; +} + +/** + * ab8500_charger_get_usb_current() - get usb charger current + * @di: pointer to the ab8500_charger structure + * + * This function returns the usb charger current. + * Returns usb current (on success) and error code on failure + */ +static int ab8500_charger_get_usb_current(struct ab8500_charger *di) +{ + int ich; + + /* Only measure current if the charger is online */ + if (di->usb.charger_online) { + ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); + if (ich < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + ich = 0; + } + return ich; +} + +/** + * ab8500_charger_get_ac_current() - get ac charger current + * @di: pointer to the ab8500_charger structure + * + * This function returns the ac charger current. + * Returns ac current (on success) and error code on failure. + */ +static int ab8500_charger_get_ac_current(struct ab8500_charger *di) +{ + int ich; + + /* Only measure current if the charger is online */ + if (di->ac.charger_online) { + ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); + if (ich < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + ich = 0; + } + return ich; +} + +/** + * ab8500_charger_usb_cv() - check if the usb charger is in CV mode + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger CV mode (on success) else error code + */ +static int ab8500_charger_usb_cv(struct ab8500_charger *di) +{ + int ret; + u8 val; + + /* Only check CV mode if the charger is online */ + if (di->usb.charger_online) { + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return 0; + } + + if (val & USB_CH_CV_ON) + ret = 1; + else + ret = 0; + } else { + ret = 0; + } + + return ret; +} + +/** + * ab8500_charger_detect_chargers() - Detect the connected chargers + * @di: pointer to the ab8500_charger structure + * + * Returns the type of charger connected. + * For USB it will not mean we can actually charge from it + * but that there is a USB cable connected that we have to + * identify. This is used during startup when we don't get + * interrupts of the charger detection + * + * Returns an integer value, that means, + * NO_PW_CONN no power supply is connected + * AC_PW_CONN if the AC power supply is connected + * USB_PW_CONN if the USB power supply is connected + * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected + */ +static int ab8500_charger_detect_chargers(struct ab8500_charger *di) +{ + int result = NO_PW_CONN; + int ret; + u8 val; + + /* Check for AC charger */ + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_STATUS1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + if (val & MAIN_CH_DET) + result = AC_PW_CONN; + + /* Check for USB charger */ + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) + result |= USB_PW_CONN; + + return result; +} + +/** + * ab8500_charger_max_usb_curr() - get the max curr for the USB type + * @di: pointer to the ab8500_charger structure + * @link_status: the identified USB type + * + * Get the maximum current that is allowed to be drawn from the host + * based on the USB type. + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, + enum ab8500_charger_link_status link_status) +{ + int ret = 0; + + switch (link_status) { + case USB_STAT_STD_HOST_NC: + case USB_STAT_STD_HOST_C_NS: + case USB_STAT_STD_HOST_C_S: + dev_dbg(di->dev, "USB Type - Standard host is " + "detected through USB driver\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + break; + case USB_STAT_HOST_CHG_HS_CHIRP: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + break; + case USB_STAT_HOST_CHG_HS: + case USB_STAT_ACA_RID_C_HS: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9; + break; + case USB_STAT_ACA_RID_A: + /* + * Dedicated charger level minus maximum current accessory + * can consume (300mA). Closest level is 1100mA + */ + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1; + break; + case USB_STAT_ACA_RID_B: + /* + * Dedicated charger level minus 120mA (20mA for ACA and + * 100mA for potential accessory). Closest level is 1300mA + */ + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3; + break; + case USB_STAT_DEDICATED_CHG: + case USB_STAT_HOST_CHG_NM: + case USB_STAT_ACA_RID_C_HS_CHIRP: + case USB_STAT_ACA_RID_C_NM: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; + break; + case USB_STAT_RESERVED: + /* + * This state is used to indicate that VBUS has dropped below + * the detection level 4 times in a row. This is due to the + * charger output current is set to high making the charger + * voltage collapse. This have to be propagated through to + * chargalg. This is done using the property + * POWER_SUPPLY_PROP_CURRENT_AVG = 1 + */ + di->flags.vbus_collapse = true; + dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED " + "VBUS has collapsed\n"); + ret = -1; + break; + case USB_STAT_HM_IDGND: + case USB_STAT_NOT_CONFIGURED: + case USB_STAT_NOT_VALID_LINK: + dev_err(di->dev, "USB Type - Charging not allowed\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + ret = -ENXIO; + break; + default: + dev_err(di->dev, "USB Type - Unknown\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + ret = -ENXIO; + break; + }; + + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", + link_status, di->max_usb_in_curr); + + return ret; +} + +/** + * ab8500_charger_read_usb_type() - read the type of usb connected + * @di: pointer to the ab8500_charger structure + * + * Detect the type of the plugged USB + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_read_usb_type(struct ab8500_charger *di) +{ + int ret; + u8 val; + + ret = abx500_get_register_interruptible(di->dev, + AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + /* get the USB type */ + val = (val & AB8500_USB_LINK_STATUS) >> 3; + ret = ab8500_charger_max_usb_curr(di, + (enum ab8500_charger_link_status) val); + + return ret; +} + +/** + * ab8500_charger_detect_usb_type() - get the type of usb connected + * @di: pointer to the ab8500_charger structure + * + * Detect the type of the plugged USB + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) +{ + int i, ret; + u8 val; + + /* + * On getting the VBUS rising edge detect interrupt there + * is a 250ms delay after which the register UsbLineStatus + * is filled with valid data. + */ + for (i = 0; i < 10; i++) { + msleep(250); + ret = abx500_get_register_interruptible(di->dev, + AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, + &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + /* + * Until the IT source register is read the UsbLineStatus + * register is not updated, hence doing the same + * Revisit this: + */ + + /* get the USB type */ + val = (val & AB8500_USB_LINK_STATUS) >> 3; + if (val) + break; + } + ret = ab8500_charger_max_usb_curr(di, + (enum ab8500_charger_link_status) val); + + return ret; +} + +/* + * This array maps the raw hex value to charger voltage used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_voltage_map[] = { + 3500 , + 3525 , + 3550 , + 3575 , + 3600 , + 3625 , + 3650 , + 3675 , + 3700 , + 3725 , + 3750 , + 3775 , + 3800 , + 3825 , + 3850 , + 3875 , + 3900 , + 3925 , + 3950 , + 3975 , + 4000 , + 4025 , + 4050 , + 4060 , + 4070 , + 4080 , + 4090 , + 4100 , + 4110 , + 4120 , + 4130 , + 4140 , + 4150 , + 4160 , + 4170 , + 4180 , + 4190 , + 4200 , + 4210 , + 4220 , + 4230 , + 4240 , + 4250 , + 4260 , + 4270 , + 4280 , + 4290 , + 4300 , + 4310 , + 4320 , + 4330 , + 4340 , + 4350 , + 4360 , + 4370 , + 4380 , + 4390 , + 4400 , + 4410 , + 4420 , + 4430 , + 4440 , + 4450 , + 4460 , + 4470 , + 4480 , + 4490 , + 4500 , + 4510 , + 4520 , + 4530 , + 4540 , + 4550 , + 4560 , + 4570 , + 4580 , + 4590 , + 4600 , +}; + +/* + * This array maps the raw hex value to charger current used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_current_map[] = { + 100 , + 200 , + 300 , + 400 , + 500 , + 600 , + 700 , + 800 , + 900 , + 1000 , + 1100 , + 1200 , + 1300 , + 1400 , + 1500 , +}; + +/* + * This array maps the raw hex value to VBUS input current used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_vbus_in_curr_map[] = { + USB_CH_IP_CUR_LVL_0P05, + USB_CH_IP_CUR_LVL_0P09, + USB_CH_IP_CUR_LVL_0P19, + USB_CH_IP_CUR_LVL_0P29, + USB_CH_IP_CUR_LVL_0P38, + USB_CH_IP_CUR_LVL_0P45, + USB_CH_IP_CUR_LVL_0P5, + USB_CH_IP_CUR_LVL_0P6, + USB_CH_IP_CUR_LVL_0P7, + USB_CH_IP_CUR_LVL_0P8, + USB_CH_IP_CUR_LVL_0P9, + USB_CH_IP_CUR_LVL_1P0, + USB_CH_IP_CUR_LVL_1P1, + USB_CH_IP_CUR_LVL_1P3, + USB_CH_IP_CUR_LVL_1P4, + USB_CH_IP_CUR_LVL_1P5, +}; + +static int ab8500_voltage_to_regval(int voltage) +{ + int i; + + /* Special case for voltage below 3.5V */ + if (voltage < ab8500_charger_voltage_map[0]) + return LOW_VOLT_REG; + + for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) { + if (voltage < ab8500_charger_voltage_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1; + if (voltage == ab8500_charger_voltage_map[i]) + return i; + else + return -1; +} + +static int ab8500_current_to_regval(int curr) +{ + int i; + + if (curr < ab8500_charger_current_map[0]) + return 0; + + for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) { + if (curr < ab8500_charger_current_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_current_map) - 1; + if (curr == ab8500_charger_current_map[i]) + return i; + else + return -1; +} + +static int ab8500_vbus_in_curr_to_regval(int curr) +{ + int i; + + if (curr < ab8500_charger_vbus_in_curr_map[0]) + return 0; + + for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) { + if (curr < ab8500_charger_vbus_in_curr_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1; + if (curr == ab8500_charger_vbus_in_curr_map[i]) + return i; + else + return -1; +} + +/** + * ab8500_charger_get_usb_cur() - get usb current + * @di: pointer to the ab8500_charger structre + * + * The usb stack provides the maximum current that can be drawn from + * the standard usb host. This will be in mA. + * This function converts current in mA to a value that can be written + * to the register. Returns -1 if charging is not allowed + */ +static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) +{ + switch (di->usb_state.usb_current) { + case 100: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + break; + case 200: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19; + break; + case 300: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29; + break; + case 400: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38; + break; + case 500: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + break; + default: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + return -1; + break; + }; + return 0; +} + +/** + * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit + * @di: pointer to the ab8500_charger structure + * @ich_in: charger input current limit + * + * Sets the current that can be drawn from the USB host + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, + int ich_in) +{ + int ret; + int input_curr_index; + int min_value; + + /* We should always use to lowest current limit */ + min_value = min(di->bat->chg_params->usb_curr_max, ich_in); + + switch (min_value) { + case 100: + if (di->vbat < VBAT_TRESH_IP_CUR_RED) + min_value = USB_CH_IP_CUR_LVL_0P05; + break; + case 500: + if (di->vbat < VBAT_TRESH_IP_CUR_RED) + min_value = USB_CH_IP_CUR_LVL_0P45; + break; + default: + break; + } + + input_curr_index = ab8500_vbus_in_curr_to_regval(min_value); + if (input_curr_index < 0) { + dev_err(di->dev, "VBUS input current limit too high\n"); + return -ENXIO; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_IPT_CRNTLVL_REG, + input_curr_index << VBUS_IN_CURR_LIM_SHIFT); + if (ret) + dev_err(di->dev, "%s write failed\n", __func__); + + return ret; +} + +/** + * ab8500_charger_led_en() - turn on/off chargign led + * @di: pointer to the ab8500_charger structure + * @on: flag to turn on/off the chargign led + * + * Power ON/OFF charging LED indication + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_led_en(struct ab8500_charger *di, int on) +{ + int ret; + + if (on) { + /* Power ON charging LED indicator, set LED current to 5mA */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_CTRL, + (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA)); + if (ret) { + dev_err(di->dev, "Power ON LED failed\n"); + return ret; + } + /* LED indicator PWM duty cycle 252/256 */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_DUTY, + LED_INDICATOR_PWM_DUTY_252_256); + if (ret) { + dev_err(di->dev, "Set LED PWM duty cycle failed\n"); + return ret; + } + } else { + /* Power off charging LED indicator */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_CTRL, + LED_INDICATOR_PWM_DIS); + if (ret) { + dev_err(di->dev, "Power-off LED failed\n"); + return ret; + } + } + + return ret; +} + +/** + * ab8500_charger_ac_en() - enable or disable ac charging + * @di: pointer to the ab8500_charger structure + * @enable: enable/disable flag + * @vset: charging voltage + * @iset: charging current + * + * Enable/Disable AC/Mains charging and turns on/off the charging led + * respectively. + **/ +static int ab8500_charger_ac_en(struct ux500_charger *charger, + int enable, int vset, int iset) +{ + int ret; + int volt_index; + int curr_index; + int input_curr_index; + u8 overshoot = 0; + + struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); + + if (enable) { + /* Check if AC is connected */ + if (!di->ac.charger_connected) { + dev_err(di->dev, "AC charger not connected\n"); + return -ENXIO; + } + + /* Enable AC charging */ + dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset); + + /* + * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts + * will be triggered everytime we enable the VDD ADC supply. + * This will turn off charging for a short while. + * It can be avoided by having the supply on when + * there is a charger enabled. Normally the VDD ADC supply + * is enabled everytime a GPADC conversion is triggered. We will + * force it to be enabled from this driver to have + * the GPADC module independant of the AB8500 chargers + */ + if (!di->vddadc_en_ac) { + regulator_enable(di->regu); + di->vddadc_en_ac = true; + } + + /* Check if the requested voltage or current is valid */ + volt_index = ab8500_voltage_to_regval(vset); + curr_index = ab8500_current_to_regval(iset); + input_curr_index = ab8500_current_to_regval( + di->bat->chg_params->ac_curr_max); + if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { + dev_err(di->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + /* ChVoltLevel: maximum battery charging voltage */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, (u8) volt_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* MainChInputCurr: current that can be drawn from the charger*/ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_IPT_CURLVL_REG, + input_curr_index << MAIN_CH_INPUT_CURR_SHIFT); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Check if VBAT overshoot control should be enabled */ + if (!di->bat->enable_overshoot) + overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; + + /* Enable Main Charger */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Power on charging LED indication */ + ret = ab8500_charger_led_en(di, true); + if (ret < 0) + dev_err(di->dev, "failed to enable LED\n"); + + di->ac.charger_online = 1; + } else { + /* Disable AC charging */ + if (is_ab8500_1p1_or_earlier(di->parent)) { + /* + * For ABB revision 1.0 and 1.1 there is a bug in the + * watchdog logic. That means we have to continously + * kick the charger watchdog even when no charger is + * connected. This is only valid once the AC charger + * has been enabled. This is a bug that is not handled + * by the algorithm and the watchdog have to be kicked + * by the charger driver when the AC charger + * is disabled + */ + if (di->ac_conn) { + queue_delayed_work(di->charger_wq, + &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); + } + + /* + * We can't turn off charging completely + * due to a bug in AB8500 cut1. + * If we do, charging will not start again. + * That is why we set the lowest voltage + * and current possible + */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + } else { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_MCH_CTRL1, 0); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) + dev_err(di->dev, "failed to disable LED\n"); + + di->ac.charger_online = 0; + di->ac.wd_expired = false; + + /* Disable regulator if enabled */ + if (di->vddadc_en_ac) { + regulator_disable(di->regu); + di->vddadc_en_ac = false; + } + + dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); + } + ab8500_power_supply_changed(di, &di->ac_chg.psy); + + return ret; +} + +/** + * ab8500_charger_usb_en() - enable usb charging + * @di: pointer to the ab8500_charger structure + * @enable: enable/disable flag + * @vset: charging voltage + * @ich_out: charger output current + * + * Enable/Disable USB charging and turns on/off the charging led respectively. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_usb_en(struct ux500_charger *charger, + int enable, int vset, int ich_out) +{ + int ret; + int volt_index; + int curr_index; + u8 overshoot = 0; + + struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); + + if (enable) { + /* Check if USB is connected */ + if (!di->usb.charger_connected) { + dev_err(di->dev, "USB charger not connected\n"); + return -ENXIO; + } + + /* + * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts + * will be triggered everytime we enable the VDD ADC supply. + * This will turn off charging for a short while. + * It can be avoided by having the supply on when + * there is a charger enabled. Normally the VDD ADC supply + * is enabled everytime a GPADC conversion is triggered. We will + * force it to be enabled from this driver to have + * the GPADC module independant of the AB8500 chargers + */ + if (!di->vddadc_en_usb) { + regulator_enable(di->regu); + di->vddadc_en_usb = true; + } + + /* Enable USB charging */ + dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out); + + /* Check if the requested voltage or current is valid */ + volt_index = ab8500_voltage_to_regval(vset); + curr_index = ab8500_current_to_regval(ich_out); + if (volt_index < 0 || curr_index < 0) { + dev_err(di->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + /* ChVoltLevel: max voltage upto which battery can be charged */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, (u8) volt_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* Check if VBAT overshoot control should be enabled */ + if (!di->bat->enable_overshoot) + overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; + + /* Enable USB Charger */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* If success power on charging LED indication */ + ret = ab8500_charger_led_en(di, true); + if (ret < 0) + dev_err(di->dev, "failed to enable LED\n"); + + queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); + + di->usb.charger_online = 1; + } else { + /* Disable USB charging */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, 0); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) + dev_err(di->dev, "failed to disable LED\n"); + + di->usb.charger_online = 0; + di->usb.wd_expired = false; + + /* Disable regulator if enabled */ + if (di->vddadc_en_usb) { + regulator_disable(di->regu); + di->vddadc_en_usb = false; + } + + dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); + + /* Cancel any pending Vbat check work */ + if (delayed_work_pending(&di->check_vbat_work)) + cancel_delayed_work(&di->check_vbat_work); + + } + ab8500_power_supply_changed(di, &di->usb_chg.psy); + + return ret; +} + +/** + * ab8500_charger_watchdog_kick() - kick charger watchdog + * @di: pointer to the ab8500_charger structure + * + * Kick charger watchdog + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_watchdog_kick(struct ux500_charger *charger) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) + di = to_ab8500_charger_ac_device_info(charger); + else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + return ret; +} + +/** + * ab8500_charger_update_charger_current() - update charger current + * @di: pointer to the ab8500_charger structure + * + * Update the charger output current for the specified charger + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_update_charger_current(struct ux500_charger *charger, + int ich_out) +{ + int ret; + int curr_index; + struct ab8500_charger *di; + + if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) + di = to_ab8500_charger_ac_device_info(charger); + else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + curr_index = ab8500_current_to_regval(ich_out); + if (curr_index < 0) { + dev_err(di->dev, + "Charger current too high, " + "charging not started\n"); + return -ENXIO; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Reset the main and usb drop input current measurement counter */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARGER_CTRL, + 0x1); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + return ret; +} + +static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_charger *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + struct ux500_charger *usb_chg; + + usb_chg = (struct ux500_charger *)data; + psy = &usb_chg->psy; + + di = to_ab8500_charger_usb_device_info(usb_chg); + + ext = dev_get_drvdata(dev); + + /* For all psy where the driver name appears in any supplied_to */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + if (ext->get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->vbat = ret.intval / 1000; + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_charger_check_vbat_work() - keep vbus current within spec + * @work pointer to the work_struct structure + * + * Due to a asic bug it is necessary to lower the input current to the vbus + * charger when charging with at some specific levels. This issue is only valid + * for below a certain battery voltage. This function makes sure that the + * the allowed current limit isn't exceeded. + */ +static void ab8500_charger_check_vbat_work(struct work_struct *work) +{ + int t = 10; + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_vbat_work.work); + + class_for_each_device(power_supply_class, NULL, + &di->usb_chg.psy, ab8500_charger_get_ext_psy_data); + + /* First run old_vbat is 0. */ + if (di->old_vbat == 0) + di->old_vbat = di->vbat; + + if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED && + di->vbat <= VBAT_TRESH_IP_CUR_RED) || + (di->old_vbat > VBAT_TRESH_IP_CUR_RED && + di->vbat > VBAT_TRESH_IP_CUR_RED))) { + + dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," + " old: %d\n", di->max_usb_in_curr, di->vbat, + di->old_vbat); + ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + power_supply_changed(&di->usb_chg.psy); + } + + di->old_vbat = di->vbat; + + /* + * No need to check the battery voltage every second when not close to + * the threshold. + */ + if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && + (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) + t = 1; + + queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); +} + +/** + * ab8500_charger_check_hw_failure_work() - check main charger failure + * @work: pointer to the work_struct structure + * + * Work queue function for checking the main charger status + */ +static void ab8500_charger_check_hw_failure_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_hw_failure_work.work); + + /* Check if the status bits for HW failure is still active */ + if (di->flags.mainextchnotok) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (!(reg_value & MAIN_CH_NOK)) { + di->flags.mainextchnotok = false; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + } + } + if (di->flags.vbus_ovv) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, + ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (!(reg_value & VBUS_OVV_TH)) { + di->flags.vbus_ovv = false; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + } + /* If we still have a failure, schedule a new check */ + if (di->flags.mainextchnotok || di->flags.vbus_ovv) { + queue_delayed_work(di->charger_wq, + &di->check_hw_failure_work, round_jiffies(HZ)); + } +} + +/** + * ab8500_charger_kick_watchdog_work() - kick the watchdog + * @work: pointer to the work_struct structure + * + * Work queue function for kicking the charger watchdog. + * + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ +static void ab8500_charger_kick_watchdog_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, kick_wd_work.work); + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + /* Schedule a new watchdog kick */ + queue_delayed_work(di->charger_wq, + &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL)); +} + +/** + * ab8500_charger_ac_work() - work to get and set main charger status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the main charger status + */ +static void ab8500_charger_ac_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, ac_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if the main charger is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (ret & AC_PW_CONN) { + di->ac.charger_connected = 1; + di->ac_conn = true; + } else { + di->ac.charger_connected = 0; + } + + ab8500_power_supply_changed(di, &di->ac_chg.psy); + sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); +} + +/** + * ab8500_charger_detect_usb_type_work() - work to detect USB type + * @work: Pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_detect_usb_type_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, detect_usb_type_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (!(ret & USB_PW_CONN)) { + di->vbus_detected = 0; + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else { + di->vbus_detected = 1; + + if (is_ab8500_1p1_or_earlier(di->parent)) { + ret = ab8500_charger_detect_usb_type(di); + if (!ret) { + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, + &di->usb_chg.psy); + } + } else { + /* For ABB cut2.0 and onwards we have an IRQ, + * USB_LINK_STATUS that will be triggered when the USB + * link status changes. The exception is USB connected + * during startup. Then we don't get a + * USB_LINK_STATUS IRQ + */ + if (di->vbus_detected_start) { + di->vbus_detected_start = false; + ret = ab8500_charger_detect_usb_type(di); + if (!ret) { + ab8500_charger_set_usb_connected(di, + true); + ab8500_power_supply_changed(di, + &di->usb_chg.psy); + } + } + } + } +} + +/** + * ab8500_charger_usb_link_status_work() - work to detect USB type + * @work: pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_usb_link_status_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, usb_link_status_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (!(ret & USB_PW_CONN)) { + di->vbus_detected = 0; + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else { + di->vbus_detected = 1; + ret = ab8500_charger_read_usb_type(di); + if (!ret) { + /* Update maximum input current */ + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr); + if (ret) + return; + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else if (ret == -ENXIO) { + /* No valid charger type detected */ + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + } +} + +static void ab8500_charger_usb_state_changed_work(struct work_struct *work) +{ + int ret; + unsigned long flags; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, usb_state_changed_work); + + if (!di->vbus_detected) + return; + + spin_lock_irqsave(&di->usb_state.usb_lock, flags); + di->usb_state.usb_changed = false; + spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); + + /* + * wait for some time until you get updates from the usb stack + * and negotiations are completed + */ + msleep(250); + + if (di->usb_state.usb_changed) + return; + + dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", + __func__, di->usb_state.state, di->usb_state.usb_current); + + switch (di->usb_state.state) { + case AB8500_BM_USB_STATE_RESET_HS: + case AB8500_BM_USB_STATE_RESET_FS: + case AB8500_BM_USB_STATE_SUSPEND: + case AB8500_BM_USB_STATE_MAX: + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + break; + + case AB8500_BM_USB_STATE_RESUME: + /* + * when suspend->resume there should be delay + * of 1sec for enabling charging + */ + msleep(1000); + /* Intentional fall through */ + case AB8500_BM_USB_STATE_CONFIGURED: + /* + * USB is configured, enable charging with the charging + * input current obtained from USB driver + */ + if (!ab8500_charger_get_usb_cur(di)) { + /* Update maximum input current */ + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr); + if (ret) + return; + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + break; + + default: + break; + }; +} + +/** + * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the USB charger Not OK status + */ +static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + bool prev_status; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_usbchgnotok_work.work); + + /* Check if the status bit for usbchargernotok is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + prev_status = di->flags.usbchargernotok; + + if (reg_value & VBUS_CH_NOK) { + di->flags.usbchargernotok = true; + /* Check again in 1sec */ + queue_delayed_work(di->charger_wq, + &di->check_usbchgnotok_work, HZ); + } else { + di->flags.usbchargernotok = false; + di->flags.vbus_collapse = false; + } + + if (prev_status != di->flags.usbchargernotok) + ab8500_power_supply_changed(di, &di->usb_chg.psy); +} + +/** + * ab8500_charger_check_main_thermal_prot_work() - check main thermal status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the Main thermal prot status + */ +static void ab8500_charger_check_main_thermal_prot_work( + struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_main_thermal_prot_work); + + /* Check if the status bit for main_thermal_prot is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (reg_value & MAIN_CH_TH_PROT) + di->flags.main_thermal_prot = true; + else + di->flags.main_thermal_prot = false; + + ab8500_power_supply_changed(di, &di->ac_chg.psy); +} + +/** + * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the USB thermal prot status + */ +static void ab8500_charger_check_usb_thermal_prot_work( + struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_usb_thermal_prot_work); + + /* Check if the status bit for usb_thermal_prot is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (reg_value & USB_CH_TH_PROT) + di->flags.usb_thermal_prot = true; + else + di->flags.usb_thermal_prot = false; + + ab8500_power_supply_changed(di, &di->usb_chg.psy); +} + +/** + * ab8500_charger_mainchunplugdet_handler() - main charger unplugged + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger unplugged\n"); + queue_work(di->charger_wq, &di->ac_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchplugdet_handler() - main charger plugged + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger plugged\n"); + queue_work(di->charger_wq, &di->ac_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainextchnotok_handler() - main charger not ok + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger not ok\n"); + di->flags.mainextchnotok = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp above Main charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_main_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp ok for Main charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_main_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusdetf_handler() - VBUS falling detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS falling detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusdetr_handler() - VBUS rising detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + di->vbus_detected = true; + dev_dbg(di->dev, "VBUS rising detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usblinkstatus_handler() - USB link status has changed + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "USB link status changed\n"); + + queue_work(di->charger_wq, &di->usb_link_status_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp above USB charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp ok for USB charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Not allowed USB charger detected\n"); + queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_chwdexp_handler() - Charger watchdog expired + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Charger watchdog expired\n"); + + /* + * The charger that was online when the watchdog expired + * needs to be restarted for charging to start again + */ + if (di->ac.charger_online) { + di->ac.wd_expired = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + } + if (di->usb.charger_online) { + di->usb.wd_expired = true; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS overvoltage detected\n"); + di->flags.vbus_ovv = true; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_ac_get_property() - get the ac/mains properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the ac/mains + * properties by reading the sysfs files. + * AC/Mains properties are online, present and voltage. + * online: ac/mains charging is in progress or not + * present: presence of the ac/mains + * voltage: AC/Mains voltage + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_charger *di; + + di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (di->flags.mainextchnotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (di->ac.wd_expired || di->usb.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (di->flags.main_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = di->ac.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->ac.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di); + val->intval = di->ac.charger_voltage * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* + * This property is used to indicate when CV mode is entered + * for the AC charger + */ + di->ac.cv_active = ab8500_charger_ac_cv(di); + val->intval = di->ac.cv_active; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = ab8500_charger_get_ac_current(di) * 1000; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * ab8500_charger_usb_get_property() - get the usb properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the usb + * properties by reading the sysfs files. + * USB properties are online, present and voltage. + * online: usb charging is in progress or not + * present: presence of the usb + * voltage: vbus voltage + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_charger *di; + + di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (di->flags.usbchargernotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (di->ac.wd_expired || di->usb.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (di->flags.usb_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (di->flags.vbus_ovv) + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = di->usb.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->usb.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di); + val->intval = di->usb.charger_voltage * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* + * This property is used to indicate when CV mode is entered + * for the USB charger + */ + di->usb.cv_active = ab8500_charger_usb_cv(di); + val->intval = di->usb.cv_active; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = ab8500_charger_get_usb_current(di) * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + /* + * This property is used to indicate when VBUS has collapsed + * due to too high output current from the USB charger + */ + if (di->flags.vbus_collapse) + val->intval = 1; + else + val->intval = 0; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * ab8500_charger_init_hw_registers() - Set up charger related registers + * @di: pointer to the ab8500_charger structure + * + * Set up charger OVV, watchdog and maximum voltage registers as well as + * charging of the backup battery + */ +static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) +{ + int ret = 0; + + /* Setup maximum charger current and voltage for ABB cut2.0 */ + if (!is_ab8500_1p1_or_earlier(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6); + if (ret) { + dev_err(di->dev, + "failed to set CH_VOLT_LVL_MAX_REG\n"); + goto out; + } + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6); + if (ret) { + dev_err(di->dev, + "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); + goto out; + } + } + + /* VBUS OVV set to 6.3V and enable automatic current limitiation */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL2_REG, + VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); + if (ret) { + dev_err(di->dev, "failed to set VBUS OVV\n"); + goto out; + } + + /* Enable main watchdog in OTP */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD); + if (ret) { + dev_err(di->dev, "failed to enable main WD in OTP\n"); + goto out; + } + + /* Enable main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA); + if (ret) { + dev_err(di->dev, "faile to enable main watchdog\n"); + goto out; + } + + /* + * Due to internal synchronisation, Enable and Kick watchdog bits + * cannot be enabled in a single write. + * A minimum delay of 2*32 kHz period (62.5µs) must be inserted + * between writing Enable then Kick bits. + */ + udelay(63); + + /* Kick main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, + (MAIN_WDOG_ENA | MAIN_WDOG_KICK)); + if (ret) { + dev_err(di->dev, "failed to kick main watchdog\n"); + goto out; + } + + /* Disable main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS); + if (ret) { + dev_err(di->dev, "failed to disable main watchdog\n"); + goto out; + } + + /* Set watchdog timeout */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_WD_TIMER_REG, WD_TIMER); + if (ret) { + dev_err(di->dev, "failed to set charger watchdog timeout\n"); + goto out; + } + + /* Backup battery voltage and current */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_RTC, + AB8500_RTC_BACKUP_CHG_REG, + di->bat->bkup_bat_v | + di->bat->bkup_bat_i); + if (ret) { + dev_err(di->dev, "failed to setup backup battery charging\n"); + goto out; + } + + /* Enable backup battery charging */ + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_RTC, AB8500_RTC_CTRL_REG, + RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); + if (ret < 0) + dev_err(di->dev, "%s mask and set failed\n", __func__); + +out: + return ret; +} + +/* + * ab8500 charger driver interrupts and their respective isr + */ +static struct ab8500_charger_interrupts ab8500_charger_irq[] = { + {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler}, + {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler}, + {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler}, + {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler}, + {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler}, + {"VBUS_DET_F", ab8500_charger_vbusdetf_handler}, + {"VBUS_DET_R", ab8500_charger_vbusdetr_handler}, + {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler}, + {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler}, + {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler}, + {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, + {"VBUS_OVV", ab8500_charger_vbusovv_handler}, + {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, +}; + +static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, + unsigned long event, void *power) +{ + struct ab8500_charger *di = + container_of(nb, struct ab8500_charger, nb); + enum ab8500_usb_state bm_usb_state; + unsigned mA = *((unsigned *)power); + + if (event != USB_EVENT_VBUS) { + dev_dbg(di->dev, "not a standard host, returning\n"); + return NOTIFY_DONE; + } + + /* TODO: State is fabricate here. See if charger really needs USB + * state or if mA is enough + */ + if ((di->usb_state.usb_current == 2) && (mA > 2)) + bm_usb_state = AB8500_BM_USB_STATE_RESUME; + else if (mA == 0) + bm_usb_state = AB8500_BM_USB_STATE_RESET_HS; + else if (mA == 2) + bm_usb_state = AB8500_BM_USB_STATE_SUSPEND; + else if (mA >= 8) /* 8, 100, 500 */ + bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED; + else /* Should never occur */ + bm_usb_state = AB8500_BM_USB_STATE_RESET_FS; + + dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n", + __func__, bm_usb_state, mA); + + spin_lock(&di->usb_state.usb_lock); + di->usb_state.usb_changed = true; + spin_unlock(&di->usb_state.usb_lock); + + di->usb_state.state = bm_usb_state; + di->usb_state.usb_current = mA; + + queue_work(di->charger_wq, &di->usb_state_changed_work); + + return NOTIFY_OK; +} + +#if defined(CONFIG_PM) +static int ab8500_charger_resume(struct platform_device *pdev) +{ + int ret; + struct ab8500_charger *di = platform_get_drvdata(pdev); + + /* + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ + if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + /* If not already pending start a new timer */ + if (!delayed_work_pending( + &di->kick_wd_work)) { + queue_delayed_work(di->charger_wq, &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); + } + } + + /* If we still have a HW failure, schedule a new check */ + if (di->flags.mainextchnotok || di->flags.vbus_ovv) { + queue_delayed_work(di->charger_wq, + &di->check_hw_failure_work, 0); + } + + return 0; +} + +static int ab8500_charger_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_charger *di = platform_get_drvdata(pdev); + + /* Cancel any pending HW failure check */ + if (delayed_work_pending(&di->check_hw_failure_work)) + cancel_delayed_work(&di->check_hw_failure_work); + + return 0; +} +#else +#define ab8500_charger_suspend NULL +#define ab8500_charger_resume NULL +#endif + +static int __devexit ab8500_charger_remove(struct platform_device *pdev) +{ + struct ab8500_charger *di = platform_get_drvdata(pdev); + int i, irq, ret; + + /* Disable AC charging */ + ab8500_charger_ac_en(&di->ac_chg, false, 0, 0); + + /* Disable USB charging */ + ab8500_charger_usb_en(&di->usb_chg, false, 0, 0); + + /* Disable interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + free_irq(irq, di); + } + + /* disable the regulator */ + regulator_put(di->regu); + + /* Backup battery voltage and current disable */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); + if (ret < 0) + dev_err(di->dev, "%s mask and set failed\n", __func__); + + usb_unregister_notifier(di->usb_phy, &di->nb); + usb_put_transceiver(di->usb_phy); + + /* Delete the work queue */ + destroy_workqueue(di->charger_wq); + + flush_scheduled_work(); + power_supply_unregister(&di->usb_chg.psy); + power_supply_unregister(&di->ac_chg.psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + + return 0; +} + +static int __devinit ab8500_charger_probe(struct platform_device *pdev) +{ + int irq, i, charger_status, ret = 0; + struct abx500_bm_plat_data *plat_data; + + struct ab8500_charger *di = + kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL); + if (!di) + return -ENOMEM; + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* initialize lock */ + spin_lock_init(&di->usb_state.usb_lock); + + /* get charger specific platform data */ + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->charger; + + if (!di->pdata) { + dev_err(di->dev, "no charger platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* get battery specific platform data */ + di->bat = plat_data->battery; + if (!di->bat) { + dev_err(di->dev, "no battery platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + di->autopower = false; + + /* AC supply */ + /* power_supply base class */ + di->ac_chg.psy.name = "ab8500_ac"; + di->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS; + di->ac_chg.psy.properties = ab8500_charger_ac_props; + di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props); + di->ac_chg.psy.get_property = ab8500_charger_ac_get_property; + di->ac_chg.psy.supplied_to = di->pdata->supplied_to; + di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants; + /* ux500_charger sub-class */ + di->ac_chg.ops.enable = &ab8500_charger_ac_en; + di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; + di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ + ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; + di->ac_chg.max_out_curr = ab8500_charger_current_map[ + ARRAY_SIZE(ab8500_charger_current_map) - 1]; + + /* USB supply */ + /* power_supply base class */ + di->usb_chg.psy.name = "ab8500_usb"; + di->usb_chg.psy.type = POWER_SUPPLY_TYPE_USB; + di->usb_chg.psy.properties = ab8500_charger_usb_props; + di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props); + di->usb_chg.psy.get_property = ab8500_charger_usb_get_property; + di->usb_chg.psy.supplied_to = di->pdata->supplied_to; + di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants; + /* ux500_charger sub-class */ + di->usb_chg.ops.enable = &ab8500_charger_usb_en; + di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; + di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ + ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; + di->usb_chg.max_out_curr = ab8500_charger_current_map[ + ARRAY_SIZE(ab8500_charger_current_map) - 1]; + + + /* Create a work queue for the charger */ + di->charger_wq = + create_singlethread_workqueue("ab8500_charger_wq"); + if (di->charger_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for HW failure check */ + INIT_DELAYED_WORK_DEFERRABLE(&di->check_hw_failure_work, + ab8500_charger_check_hw_failure_work); + INIT_DELAYED_WORK_DEFERRABLE(&di->check_usbchgnotok_work, + ab8500_charger_check_usbchargernotok_work); + + /* + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ + INIT_DELAYED_WORK_DEFERRABLE(&di->kick_wd_work, + ab8500_charger_kick_watchdog_work); + + INIT_DELAYED_WORK_DEFERRABLE(&di->check_vbat_work, + ab8500_charger_check_vbat_work); + + /* Init work for charger detection */ + INIT_WORK(&di->usb_link_status_work, + ab8500_charger_usb_link_status_work); + INIT_WORK(&di->ac_work, ab8500_charger_ac_work); + INIT_WORK(&di->detect_usb_type_work, + ab8500_charger_detect_usb_type_work); + + INIT_WORK(&di->usb_state_changed_work, + ab8500_charger_usb_state_changed_work); + + /* Init work for checking HW status */ + INIT_WORK(&di->check_main_thermal_prot_work, + ab8500_charger_check_main_thermal_prot_work); + INIT_WORK(&di->check_usb_thermal_prot_work, + ab8500_charger_check_usb_thermal_prot_work); + + /* + * VDD ADC supply needs to be enabled from this driver when there + * is a charger connected to avoid erroneous BTEMP_HIGH/LOW + * interrupts during charging + */ + di->regu = regulator_get(di->dev, "vddadc"); + if (IS_ERR(di->regu)) { + ret = PTR_ERR(di->regu); + dev_err(di->dev, "failed to get vddadc regulator\n"); + goto free_charger_wq; + } + + + /* Initialize OVV, and other registers */ + ret = ab8500_charger_init_hw_registers(di); + if (ret) { + dev_err(di->dev, "failed to initialize ABB registers\n"); + goto free_regulator; + } + + /* Register AC charger class */ + ret = power_supply_register(di->dev, &di->ac_chg.psy); + if (ret) { + dev_err(di->dev, "failed to register AC charger\n"); + goto free_regulator; + } + + /* Register USB charger class */ + ret = power_supply_register(di->dev, &di->usb_chg.psy); + if (ret) { + dev_err(di->dev, "failed to register USB charger\n"); + goto free_ac; + } + + di->usb_phy = usb_get_transceiver(); + if (!di->usb_phy) { + dev_err(di->dev, "failed to get usb transceiver\n"); + ret = -EINVAL; + goto free_usb; + } + di->nb.notifier_call = ab8500_charger_usb_notifier_call; + ret = usb_register_notifier(di->usb_phy, &di->nb); + if (ret) { + dev_err(di->dev, "failed to register usb notifier\n"); + goto put_usb_phy; + } + + /* Identify the connected charger types during startup */ + charger_status = ab8500_charger_detect_chargers(di); + if (charger_status & AC_PW_CONN) { + di->ac.charger_connected = 1; + di->ac_conn = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); + } + + if (charger_status & USB_PW_CONN) { + dev_dbg(di->dev, "VBUS Detect during startup\n"); + di->vbus_detected = true; + di->vbus_detected_start = true; + queue_work(di->charger_wq, + &di->detect_usb_type_work); + } + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_charger_irq[i].name, di); + + if (ret != 0) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_charger_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_charger_irq[i].name, irq, ret); + } + + platform_set_drvdata(pdev, di); + + return ret; + +free_irq: + usb_unregister_notifier(di->usb_phy, &di->nb); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + free_irq(irq, di); + } +put_usb_phy: + usb_put_transceiver(di->usb_phy); +free_usb: + power_supply_unregister(&di->usb_chg.psy); +free_ac: + power_supply_unregister(&di->ac_chg.psy); +free_regulator: + regulator_put(di->regu); +free_charger_wq: + destroy_workqueue(di->charger_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver ab8500_charger_driver = { + .probe = ab8500_charger_probe, + .remove = __devexit_p(ab8500_charger_remove), + .suspend = ab8500_charger_suspend, + .resume = ab8500_charger_resume, + .driver = { + .name = "ab8500-charger", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_charger_init(void) +{ + return platform_driver_register(&ab8500_charger_driver); +} + +static void __exit ab8500_charger_exit(void) +{ + platform_driver_unregister(&ab8500_charger_driver); +} + +subsys_initcall_sync(ab8500_charger_init); +module_exit(ab8500_charger_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); +MODULE_ALIAS("platform:ab8500-charger"); +MODULE_DESCRIPTION("AB8500 charger management driver"); diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c new file mode 100644 index 000000000000..c22f2f05657e --- /dev/null +++ b/drivers/power/ab8500_fg.c @@ -0,0 +1,2637 @@ +/* + * Copyright (C) ST-Ericsson AB 2012 + * + * Main and Back-up battery management driver. + * + * Note: Backup battery management is required in case of Li-Ion battery and not + * for capacitive battery. HREF boards have capacitive battery and hence backup + * battery management is not used and the supported code is available in this + * driver. + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/kobject.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500.h> +#include <linux/slab.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/delay.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/mfd/abx500.h> +#include <linux/time.h> +#include <linux/completion.h> + +#define MILLI_TO_MICRO 1000 +#define FG_LSB_IN_MA 1627 +#define QLSB_NANO_AMP_HOURS_X10 1129 +#define INS_CURR_TIMEOUT (3 * HZ) + +#define SEC_TO_SAMPLE(S) (S * 4) + +#define NBR_AVG_SAMPLES 20 + +#define LOW_BAT_CHECK_INTERVAL (2 * HZ) + +#define VALID_CAPACITY_SEC (45 * 60) /* 45 minutes */ +#define BATT_OK_MIN 2360 /* mV */ +#define BATT_OK_INCREMENT 50 /* mV */ +#define BATT_OK_MAX_NR_INCREMENTS 0xE + +/* FG constants */ +#define BATT_OVV 0x01 + +#define interpolate(x, x1, y1, x2, y2) \ + ((y1) + ((((y2) - (y1)) * ((x) - (x1))) / ((x2) - (x1)))); + +#define to_ab8500_fg_device_info(x) container_of((x), \ + struct ab8500_fg, fg_psy); + +/** + * struct ab8500_fg_interrupts - ab8500 fg interupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_fg_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +enum ab8500_fg_discharge_state { + AB8500_FG_DISCHARGE_INIT, + AB8500_FG_DISCHARGE_INITMEASURING, + AB8500_FG_DISCHARGE_INIT_RECOVERY, + AB8500_FG_DISCHARGE_RECOVERY, + AB8500_FG_DISCHARGE_READOUT_INIT, + AB8500_FG_DISCHARGE_READOUT, + AB8500_FG_DISCHARGE_WAKEUP, +}; + +static char *discharge_state[] = { + "DISCHARGE_INIT", + "DISCHARGE_INITMEASURING", + "DISCHARGE_INIT_RECOVERY", + "DISCHARGE_RECOVERY", + "DISCHARGE_READOUT_INIT", + "DISCHARGE_READOUT", + "DISCHARGE_WAKEUP", +}; + +enum ab8500_fg_charge_state { + AB8500_FG_CHARGE_INIT, + AB8500_FG_CHARGE_READOUT, +}; + +static char *charge_state[] = { + "CHARGE_INIT", + "CHARGE_READOUT", +}; + +enum ab8500_fg_calibration_state { + AB8500_FG_CALIB_INIT, + AB8500_FG_CALIB_WAIT, + AB8500_FG_CALIB_END, +}; + +struct ab8500_fg_avg_cap { + int avg; + int samples[NBR_AVG_SAMPLES]; + __kernel_time_t time_stamps[NBR_AVG_SAMPLES]; + int pos; + int nbr_samples; + int sum; +}; + +struct ab8500_fg_battery_capacity { + int max_mah_design; + int max_mah; + int mah; + int permille; + int level; + int prev_mah; + int prev_percent; + int prev_level; + int user_mah; +}; + +struct ab8500_fg_flags { + bool fg_enabled; + bool conv_done; + bool charging; + bool fully_charged; + bool force_full; + bool low_bat_delay; + bool low_bat; + bool bat_ovv; + bool batt_unknown; + bool calibrate; + bool user_cap; + bool batt_id_received; +}; + +struct inst_curr_result_list { + struct list_head list; + int *result; +}; + +/** + * struct ab8500_fg - ab8500 FG device information + * @dev: Pointer to the structure device + * @node: a list of AB8500 FGs, hence prepared for reentrance + * @irq holds the CCEOC interrupt number + * @vbat: Battery voltage in mV + * @vbat_nom: Nominal battery voltage in mV + * @inst_curr: Instantenous battery current in mA + * @avg_curr: Average battery current in mA + * @bat_temp battery temperature + * @fg_samples: Number of samples used in the FG accumulation + * @accu_charge: Accumulated charge from the last conversion + * @recovery_cnt: Counter for recovery mode + * @high_curr_cnt: Counter for high current mode + * @init_cnt: Counter for init mode + * @recovery_needed: Indicate if recovery is needed + * @high_curr_mode: Indicate if we're in high current mode + * @init_capacity: Indicate if initial capacity measuring should be done + * @turn_off_fg: True if fg was off before current measurement + * @calib_state State during offset calibration + * @discharge_state: Current discharge state + * @charge_state: Current charge state + * @ab8500_fg_complete Completion struct used for the instant current reading + * @flags: Structure for information about events triggered + * @bat_cap: Structure for battery capacity specific parameters + * @avg_cap: Average capacity filter + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @pdata: Pointer to the abx500_fg platform data + * @bat: Pointer to the abx500_bm platform data + * @fg_psy: Structure that holds the FG specific battery properties + * @fg_wq: Work queue for running the FG algorithm + * @fg_periodic_work: Work to run the FG algorithm periodically + * @fg_low_bat_work: Work to check low bat condition + * @fg_reinit_work Work used to reset and reinitialise the FG algorithm + * @fg_work: Work to run the FG algorithm instantly + * @fg_acc_cur_work: Work to read the FG accumulator + * @fg_check_hw_failure_work: Work for checking HW state + * @cc_lock: Mutex for locking the CC + * @fg_kobject: Structure of type kobject + */ +struct ab8500_fg { + struct device *dev; + struct list_head node; + int irq; + int vbat; + int vbat_nom; + int inst_curr; + int avg_curr; + int bat_temp; + int fg_samples; + int accu_charge; + int recovery_cnt; + int high_curr_cnt; + int init_cnt; + bool recovery_needed; + bool high_curr_mode; + bool init_capacity; + bool turn_off_fg; + enum ab8500_fg_calibration_state calib_state; + enum ab8500_fg_discharge_state discharge_state; + enum ab8500_fg_charge_state charge_state; + struct completion ab8500_fg_complete; + struct ab8500_fg_flags flags; + struct ab8500_fg_battery_capacity bat_cap; + struct ab8500_fg_avg_cap avg_cap; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct abx500_fg_platform_data *pdata; + struct abx500_bm_data *bat; + struct power_supply fg_psy; + struct workqueue_struct *fg_wq; + struct delayed_work fg_periodic_work; + struct delayed_work fg_low_bat_work; + struct delayed_work fg_reinit_work; + struct work_struct fg_work; + struct work_struct fg_acc_cur_work; + struct delayed_work fg_check_hw_failure_work; + struct mutex cc_lock; + struct kobject fg_kobject; +}; +static LIST_HEAD(ab8500_fg_list); + +/** + * ab8500_fg_get() - returns a reference to the primary AB8500 fuel gauge + * (i.e. the first fuel gauge in the instance list) + */ +struct ab8500_fg *ab8500_fg_get(void) +{ + struct ab8500_fg *fg; + + if (list_empty(&ab8500_fg_list)) + return NULL; + + fg = list_first_entry(&ab8500_fg_list, struct ab8500_fg, node); + return fg; +} + +/* Main battery properties */ +static enum power_supply_property ab8500_fg_props[] = { + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, + POWER_SUPPLY_PROP_ENERGY_FULL, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, +}; + +/* + * This array maps the raw hex value to lowbat voltage used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_fg_lowbat_voltage_map[] = { + 2300 , + 2325 , + 2350 , + 2375 , + 2400 , + 2425 , + 2450 , + 2475 , + 2500 , + 2525 , + 2550 , + 2575 , + 2600 , + 2625 , + 2650 , + 2675 , + 2700 , + 2725 , + 2750 , + 2775 , + 2800 , + 2825 , + 2850 , + 2875 , + 2900 , + 2925 , + 2950 , + 2975 , + 3000 , + 3025 , + 3050 , + 3075 , + 3100 , + 3125 , + 3150 , + 3175 , + 3200 , + 3225 , + 3250 , + 3275 , + 3300 , + 3325 , + 3350 , + 3375 , + 3400 , + 3425 , + 3450 , + 3475 , + 3500 , + 3525 , + 3550 , + 3575 , + 3600 , + 3625 , + 3650 , + 3675 , + 3700 , + 3725 , + 3750 , + 3775 , + 3800 , + 3825 , + 3850 , + 3850 , +}; + +static u8 ab8500_volt_to_regval(int voltage) +{ + int i; + + if (voltage < ab8500_fg_lowbat_voltage_map[0]) + return 0; + + for (i = 0; i < ARRAY_SIZE(ab8500_fg_lowbat_voltage_map); i++) { + if (voltage < ab8500_fg_lowbat_voltage_map[i]) + return (u8) i - 1; + } + + /* If not captured above, return index of last element */ + return (u8) ARRAY_SIZE(ab8500_fg_lowbat_voltage_map) - 1; +} + +/** + * ab8500_fg_is_low_curr() - Low or high current mode + * @di: pointer to the ab8500_fg structure + * @curr: the current to base or our decision on + * + * Low current mode if the current consumption is below a certain threshold + */ +static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr) +{ + /* + * We want to know if we're in low current mode + */ + if (curr > -di->bat->fg_params->high_curr_threshold) + return true; + else + return false; +} + +/** + * ab8500_fg_add_cap_sample() - Add capacity to average filter + * @di: pointer to the ab8500_fg structure + * @sample: the capacity in mAh to add to the filter + * + * A capacity is added to the filter and a new mean capacity is calculated and + * returned + */ +static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample) +{ + struct timespec ts; + struct ab8500_fg_avg_cap *avg = &di->avg_cap; + + getnstimeofday(&ts); + + do { + avg->sum += sample - avg->samples[avg->pos]; + avg->samples[avg->pos] = sample; + avg->time_stamps[avg->pos] = ts.tv_sec; + avg->pos++; + + if (avg->pos == NBR_AVG_SAMPLES) + avg->pos = 0; + + if (avg->nbr_samples < NBR_AVG_SAMPLES) + avg->nbr_samples++; + + /* + * Check the time stamp for each sample. If too old, + * replace with latest sample + */ + } while (ts.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]); + + avg->avg = avg->sum / avg->nbr_samples; + + return avg->avg; +} + +/** + * ab8500_fg_clear_cap_samples() - Clear average filter + * @di: pointer to the ab8500_fg structure + * + * The capacity filter is is reset to zero. + */ +static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di) +{ + int i; + struct ab8500_fg_avg_cap *avg = &di->avg_cap; + + avg->pos = 0; + avg->nbr_samples = 0; + avg->sum = 0; + avg->avg = 0; + + for (i = 0; i < NBR_AVG_SAMPLES; i++) { + avg->samples[i] = 0; + avg->time_stamps[i] = 0; + } +} + +/** + * ab8500_fg_fill_cap_sample() - Fill average filter + * @di: pointer to the ab8500_fg structure + * @sample: the capacity in mAh to fill the filter with + * + * The capacity filter is filled with a capacity in mAh + */ +static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample) +{ + int i; + struct timespec ts; + struct ab8500_fg_avg_cap *avg = &di->avg_cap; + + getnstimeofday(&ts); + + for (i = 0; i < NBR_AVG_SAMPLES; i++) { + avg->samples[i] = sample; + avg->time_stamps[i] = ts.tv_sec; + } + + avg->pos = 0; + avg->nbr_samples = NBR_AVG_SAMPLES; + avg->sum = sample * NBR_AVG_SAMPLES; + avg->avg = sample; +} + +/** + * ab8500_fg_coulomb_counter() - enable coulomb counter + * @di: pointer to the ab8500_fg structure + * @enable: enable/disable + * + * Enable/Disable coulomb counter. + * On failure returns negative value. + */ +static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable) +{ + int ret = 0; + mutex_lock(&di->cc_lock); + if (enable) { + /* To be able to reprogram the number of samples, we have to + * first stop the CC and then enable it again */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, 0x00); + if (ret) + goto cc_err; + + /* Program the samples */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU, + di->fg_samples); + if (ret) + goto cc_err; + + /* Start the CC */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, + (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA)); + if (ret) + goto cc_err; + + di->flags.fg_enabled = true; + } else { + /* Clear any pending read requests */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0); + if (ret) + goto cc_err; + + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU_CTRL, 0); + if (ret) + goto cc_err; + + /* Stop the CC */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, 0); + if (ret) + goto cc_err; + + di->flags.fg_enabled = false; + + } + dev_dbg(di->dev, " CC enabled: %d Samples: %d\n", + enable, di->fg_samples); + + mutex_unlock(&di->cc_lock); + + return ret; +cc_err: + dev_err(di->dev, "%s Enabling coulomb counter failed\n", __func__); + mutex_unlock(&di->cc_lock); + return ret; +} + +/** + * ab8500_fg_inst_curr_start() - start battery instantaneous current + * @di: pointer to the ab8500_fg structure + * + * Returns 0 or error code + * Note: This is part "one" and has to be called before + * ab8500_fg_inst_curr_finalize() + */ + int ab8500_fg_inst_curr_start(struct ab8500_fg *di) +{ + u8 reg_val; + int ret; + + mutex_lock(&di->cc_lock); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, ®_val); + if (ret < 0) + goto fail; + + if (!(reg_val & CC_PWR_UP_ENA)) { + dev_dbg(di->dev, "%s Enable FG\n", __func__); + di->turn_off_fg = true; + + /* Program the samples */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU, + SEC_TO_SAMPLE(10)); + if (ret) + goto fail; + + /* Start the CC */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, + (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA)); + if (ret) + goto fail; + } else { + di->turn_off_fg = false; + } + + /* Return and WFI */ + INIT_COMPLETION(di->ab8500_fg_complete); + enable_irq(di->irq); + + /* Note: cc_lock is still locked */ + return 0; +fail: + mutex_unlock(&di->cc_lock); + return ret; +} + +/** + * ab8500_fg_inst_curr_done() - check if fg conversion is done + * @di: pointer to the ab8500_fg structure + * + * Returns 1 if conversion done, 0 if still waiting + */ +int ab8500_fg_inst_curr_done(struct ab8500_fg *di) +{ + return completion_done(&di->ab8500_fg_complete); +} + +/** + * ab8500_fg_inst_curr_finalize() - battery instantaneous current + * @di: pointer to the ab8500_fg structure + * @res: battery instantenous current(on success) + * + * Returns 0 or an error code + * Note: This is part "two" and has to be called at earliest 250 ms + * after ab8500_fg_inst_curr_start() + */ +int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) +{ + u8 low, high; + int val; + int ret; + int timeout; + + if (!completion_done(&di->ab8500_fg_complete)) { + timeout = wait_for_completion_timeout(&di->ab8500_fg_complete, + INS_CURR_TIMEOUT); + dev_dbg(di->dev, "Finalize time: %d ms\n", + ((INS_CURR_TIMEOUT - timeout) * 1000) / HZ); + if (!timeout) { + ret = -ETIME; + disable_irq(di->irq); + dev_err(di->dev, "completion timed out [%d]\n", + __LINE__); + goto fail; + } + } + + disable_irq(di->irq); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + READ_REQ, READ_REQ); + + /* 100uS between read request and read is needed */ + usleep_range(100, 100); + + /* Read CC Sample conversion value Low and high */ + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_SMPL_CNVL_REG, &low); + if (ret < 0) + goto fail; + + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_SMPL_CNVH_REG, &high); + if (ret < 0) + goto fail; + + /* + * negative value for Discharging + * convert 2's compliment into decimal + */ + if (high & 0x10) + val = (low | (high << 8) | 0xFFFFE000); + else + val = (low | (high << 8)); + + /* + * Convert to unit value in mA + * Full scale input voltage is + * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA + * Given a 250ms conversion cycle time the LSB corresponds + * to 112.9 nAh. Convert to current by dividing by the conversion + * time in hours (250ms = 1 / (3600 * 4)h) + * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + */ + val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / + (1000 * di->bat->fg_res); + + if (di->turn_off_fg) { + dev_dbg(di->dev, "%s Disable FG\n", __func__); + + /* Clear any pending read requests */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0); + if (ret) + goto fail; + + /* Stop the CC */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, 0); + if (ret) + goto fail; + } + mutex_unlock(&di->cc_lock); + (*res) = val; + + return 0; +fail: + mutex_unlock(&di->cc_lock); + return ret; +} + +/** + * ab8500_fg_inst_curr_blocking() - battery instantaneous current + * @di: pointer to the ab8500_fg structure + * @res: battery instantenous current(on success) + * + * Returns 0 else error code + */ +int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di) +{ + int ret; + int res = 0; + + ret = ab8500_fg_inst_curr_start(di); + if (ret) { + dev_err(di->dev, "Failed to initialize fg_inst\n"); + return 0; + } + + ret = ab8500_fg_inst_curr_finalize(di, &res); + if (ret) { + dev_err(di->dev, "Failed to finalize fg_inst\n"); + return 0; + } + + return res; +} + +/** + * ab8500_fg_acc_cur_work() - average battery current + * @work: pointer to the work_struct structure + * + * Updated the average battery current obtained from the + * coulomb counter. + */ +static void ab8500_fg_acc_cur_work(struct work_struct *work) +{ + int val; + int ret; + u8 low, med, high; + + struct ab8500_fg *di = container_of(work, + struct ab8500_fg, fg_acc_cur_work); + + mutex_lock(&di->cc_lock); + ret = abx500_set_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_NCOV_ACCU_CTRL, RD_NCONV_ACCU_REQ); + if (ret) + goto exit; + + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_NCOV_ACCU_LOW, &low); + if (ret < 0) + goto exit; + + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_NCOV_ACCU_MED, &med); + if (ret < 0) + goto exit; + + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_NCOV_ACCU_HIGH, &high); + if (ret < 0) + goto exit; + + /* Check for sign bit in case of negative value, 2's compliment */ + if (high & 0x10) + val = (low | (med << 8) | (high << 16) | 0xFFE00000); + else + val = (low | (med << 8) | (high << 16)); + + /* + * Convert to uAh + * Given a 250ms conversion cycle time the LSB corresponds + * to 112.9 nAh. + * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + */ + di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) / + (100 * di->bat->fg_res); + + /* + * Convert to unit value in mA + * Full scale input voltage is + * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA + * Given a 250ms conversion cycle time the LSB corresponds + * to 112.9 nAh. Convert to current by dividing by the conversion + * time in hours (= samples / (3600 * 4)h) + * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + */ + di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) / + (1000 * di->bat->fg_res * (di->fg_samples / 4)); + + di->flags.conv_done = true; + + mutex_unlock(&di->cc_lock); + + queue_work(di->fg_wq, &di->fg_work); + + return; +exit: + dev_err(di->dev, + "Failed to read or write gas gauge registers\n"); + mutex_unlock(&di->cc_lock); + queue_work(di->fg_wq, &di->fg_work); +} + +/** + * ab8500_fg_bat_voltage() - get battery voltage + * @di: pointer to the ab8500_fg structure + * + * Returns battery voltage(on success) else error code + */ +static int ab8500_fg_bat_voltage(struct ab8500_fg *di) +{ + int vbat; + static int prev; + + vbat = ab8500_gpadc_convert(di->gpadc, MAIN_BAT_V); + if (vbat < 0) { + dev_err(di->dev, + "%s gpadc conversion failed, using previous value\n", + __func__); + return prev; + } + + prev = vbat; + return vbat; +} + +/** + * ab8500_fg_volt_to_capacity() - Voltage based capacity + * @di: pointer to the ab8500_fg structure + * @voltage: The voltage to convert to a capacity + * + * Returns battery capacity in per mille based on voltage + */ +static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage) +{ + int i, tbl_size; + struct abx500_v_to_cap *tbl; + int cap = 0; + + tbl = di->bat->bat_type[di->bat->batt_id].v_to_cap_tbl, + tbl_size = di->bat->bat_type[di->bat->batt_id].n_v_cap_tbl_elements; + + for (i = 0; i < tbl_size; ++i) { + if (voltage > tbl[i].voltage) + break; + } + + if ((i > 0) && (i < tbl_size)) { + cap = interpolate(voltage, + tbl[i].voltage, + tbl[i].capacity * 10, + tbl[i-1].voltage, + tbl[i-1].capacity * 10); + } else if (i == 0) { + cap = 1000; + } else { + cap = 0; + } + + dev_dbg(di->dev, "%s Vbat: %d, Cap: %d per mille", + __func__, voltage, cap); + + return cap; +} + +/** + * ab8500_fg_uncomp_volt_to_capacity() - Uncompensated voltage based capacity + * @di: pointer to the ab8500_fg structure + * + * Returns battery capacity based on battery voltage that is not compensated + * for the voltage drop due to the load + */ +static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di) +{ + di->vbat = ab8500_fg_bat_voltage(di); + return ab8500_fg_volt_to_capacity(di, di->vbat); +} + +/** + * ab8500_fg_battery_resistance() - Returns the battery inner resistance + * @di: pointer to the ab8500_fg structure + * + * Returns battery inner resistance added with the fuel gauge resistor value + * to get the total resistance in the whole link from gnd to bat+ node. + */ +static int ab8500_fg_battery_resistance(struct ab8500_fg *di) +{ + int i, tbl_size; + struct batres_vs_temp *tbl; + int resist = 0; + + tbl = di->bat->bat_type[di->bat->batt_id].batres_tbl; + tbl_size = di->bat->bat_type[di->bat->batt_id].n_batres_tbl_elements; + + for (i = 0; i < tbl_size; ++i) { + if (di->bat_temp / 10 > tbl[i].temp) + break; + } + + if ((i > 0) && (i < tbl_size)) { + resist = interpolate(di->bat_temp / 10, + tbl[i].temp, + tbl[i].resist, + tbl[i-1].temp, + tbl[i-1].resist); + } else if (i == 0) { + resist = tbl[0].resist; + } else { + resist = tbl[tbl_size - 1].resist; + } + + dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d" + " fg resistance %d, total: %d (mOhm)\n", + __func__, di->bat_temp, resist, di->bat->fg_res / 10, + (di->bat->fg_res / 10) + resist); + + /* fg_res variable is in 0.1mOhm */ + resist += di->bat->fg_res / 10; + + return resist; +} + +/** + * ab8500_fg_load_comp_volt_to_capacity() - Load compensated voltage based capacity + * @di: pointer to the ab8500_fg structure + * + * Returns battery capacity based on battery voltage that is load compensated + * for the voltage drop + */ +static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di) +{ + int vbat_comp, res; + int i = 0; + int vbat = 0; + + ab8500_fg_inst_curr_start(di); + + do { + vbat += ab8500_fg_bat_voltage(di); + i++; + msleep(5); + } while (!ab8500_fg_inst_curr_done(di)); + + ab8500_fg_inst_curr_finalize(di, &di->inst_curr); + + di->vbat = vbat / i; + res = ab8500_fg_battery_resistance(di); + + /* Use Ohms law to get the load compensated voltage */ + vbat_comp = di->vbat - (di->inst_curr * res) / 1000; + + dev_dbg(di->dev, "%s Measured Vbat: %dmV,Compensated Vbat %dmV, " + "R: %dmOhm, Current: %dmA Vbat Samples: %d\n", + __func__, di->vbat, vbat_comp, res, di->inst_curr, i); + + return ab8500_fg_volt_to_capacity(di, vbat_comp); +} + +/** + * ab8500_fg_convert_mah_to_permille() - Capacity in mAh to permille + * @di: pointer to the ab8500_fg structure + * @cap_mah: capacity in mAh + * + * Converts capacity in mAh to capacity in permille + */ +static int ab8500_fg_convert_mah_to_permille(struct ab8500_fg *di, int cap_mah) +{ + return (cap_mah * 1000) / di->bat_cap.max_mah_design; +} + +/** + * ab8500_fg_convert_permille_to_mah() - Capacity in permille to mAh + * @di: pointer to the ab8500_fg structure + * @cap_pm: capacity in permille + * + * Converts capacity in permille to capacity in mAh + */ +static int ab8500_fg_convert_permille_to_mah(struct ab8500_fg *di, int cap_pm) +{ + return cap_pm * di->bat_cap.max_mah_design / 1000; +} + +/** + * ab8500_fg_convert_mah_to_uwh() - Capacity in mAh to uWh + * @di: pointer to the ab8500_fg structure + * @cap_mah: capacity in mAh + * + * Converts capacity in mAh to capacity in uWh + */ +static int ab8500_fg_convert_mah_to_uwh(struct ab8500_fg *di, int cap_mah) +{ + u64 div_res; + u32 div_rem; + + div_res = ((u64) cap_mah) * ((u64) di->vbat_nom); + div_rem = do_div(div_res, 1000); + + /* Make sure to round upwards if necessary */ + if (div_rem >= 1000 / 2) + div_res++; + + return (int) div_res; +} + +/** + * ab8500_fg_calc_cap_charging() - Calculate remaining capacity while charging + * @di: pointer to the ab8500_fg structure + * + * Return the capacity in mAh based on previous calculated capcity and the FG + * accumulator register value. The filter is filled with this capacity + */ +static int ab8500_fg_calc_cap_charging(struct ab8500_fg *di) +{ + dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n", + __func__, + di->bat_cap.mah, + di->accu_charge); + + /* Capacity should not be less than 0 */ + if (di->bat_cap.mah + di->accu_charge > 0) + di->bat_cap.mah += di->accu_charge; + else + di->bat_cap.mah = 0; + /* + * We force capacity to 100% once when the algorithm + * reports that it's full. + */ + if (di->bat_cap.mah >= di->bat_cap.max_mah_design || + di->flags.force_full) { + di->bat_cap.mah = di->bat_cap.max_mah_design; + } + + ab8500_fg_fill_cap_sample(di, di->bat_cap.mah); + di->bat_cap.permille = + ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah); + + /* We need to update battery voltage and inst current when charging */ + di->vbat = ab8500_fg_bat_voltage(di); + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + + return di->bat_cap.mah; +} + +/** + * ab8500_fg_calc_cap_discharge_voltage() - Capacity in discharge with voltage + * @di: pointer to the ab8500_fg structure + * @comp: if voltage should be load compensated before capacity calc + * + * Return the capacity in mAh based on the battery voltage. The voltage can + * either be load compensated or not. This value is added to the filter and a + * new mean value is calculated and returned. + */ +static int ab8500_fg_calc_cap_discharge_voltage(struct ab8500_fg *di, bool comp) +{ + int permille, mah; + + if (comp) + permille = ab8500_fg_load_comp_volt_to_capacity(di); + else + permille = ab8500_fg_uncomp_volt_to_capacity(di); + + mah = ab8500_fg_convert_permille_to_mah(di, permille); + + di->bat_cap.mah = ab8500_fg_add_cap_sample(di, mah); + di->bat_cap.permille = + ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah); + + return di->bat_cap.mah; +} + +/** + * ab8500_fg_calc_cap_discharge_fg() - Capacity in discharge with FG + * @di: pointer to the ab8500_fg structure + * + * Return the capacity in mAh based on previous calculated capcity and the FG + * accumulator register value. This value is added to the filter and a + * new mean value is calculated and returned. + */ +static int ab8500_fg_calc_cap_discharge_fg(struct ab8500_fg *di) +{ + int permille_volt, permille; + + dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n", + __func__, + di->bat_cap.mah, + di->accu_charge); + + /* Capacity should not be less than 0 */ + if (di->bat_cap.mah + di->accu_charge > 0) + di->bat_cap.mah += di->accu_charge; + else + di->bat_cap.mah = 0; + + if (di->bat_cap.mah >= di->bat_cap.max_mah_design) + di->bat_cap.mah = di->bat_cap.max_mah_design; + + /* + * Check against voltage based capacity. It can not be lower + * than what the uncompensated voltage says + */ + permille = ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah); + permille_volt = ab8500_fg_uncomp_volt_to_capacity(di); + + if (permille < permille_volt) { + di->bat_cap.permille = permille_volt; + di->bat_cap.mah = ab8500_fg_convert_permille_to_mah(di, + di->bat_cap.permille); + + dev_dbg(di->dev, "%s voltage based: perm %d perm_volt %d\n", + __func__, + permille, + permille_volt); + + ab8500_fg_fill_cap_sample(di, di->bat_cap.mah); + } else { + ab8500_fg_fill_cap_sample(di, di->bat_cap.mah); + di->bat_cap.permille = + ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah); + } + + return di->bat_cap.mah; +} + +/** + * ab8500_fg_capacity_level() - Get the battery capacity level + * @di: pointer to the ab8500_fg structure + * + * Get the battery capacity level based on the capacity in percent + */ +static int ab8500_fg_capacity_level(struct ab8500_fg *di) +{ + int ret, percent; + + percent = di->bat_cap.permille / 10; + + if (percent <= di->bat->cap_levels->critical || + di->flags.low_bat) + ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + else if (percent <= di->bat->cap_levels->low) + ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + else if (percent <= di->bat->cap_levels->normal) + ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + else if (percent <= di->bat->cap_levels->high) + ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH; + else + ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + + return ret; +} + +/** + * ab8500_fg_check_capacity_limits() - Check if capacity has changed + * @di: pointer to the ab8500_fg structure + * @init: capacity is allowed to go up in init mode + * + * Check if capacity or capacity limit has changed and notify the system + * about it using the power_supply framework + */ +static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) +{ + bool changed = false; + + di->bat_cap.level = ab8500_fg_capacity_level(di); + + if (di->bat_cap.level != di->bat_cap.prev_level) { + /* + * We do not allow reported capacity level to go up + * unless we're charging or if we're in init + */ + if (!(!di->flags.charging && di->bat_cap.level > + di->bat_cap.prev_level) || init) { + dev_dbg(di->dev, "level changed from %d to %d\n", + di->bat_cap.prev_level, + di->bat_cap.level); + di->bat_cap.prev_level = di->bat_cap.level; + changed = true; + } else { + dev_dbg(di->dev, "level not allowed to go up " + "since no charger is connected: %d to %d\n", + di->bat_cap.prev_level, + di->bat_cap.level); + } + } + + /* + * If we have received the LOW_BAT IRQ, set capacity to 0 to initiate + * shutdown + */ + if (di->flags.low_bat) { + dev_dbg(di->dev, "Battery low, set capacity to 0\n"); + di->bat_cap.prev_percent = 0; + di->bat_cap.permille = 0; + di->bat_cap.prev_mah = 0; + di->bat_cap.mah = 0; + changed = true; + } else if (di->flags.fully_charged) { + /* + * We report 100% if algorithm reported fully charged + * unless capacity drops too much + */ + if (di->flags.force_full) { + di->bat_cap.prev_percent = di->bat_cap.permille / 10; + di->bat_cap.prev_mah = di->bat_cap.mah; + } else if (!di->flags.force_full && + di->bat_cap.prev_percent != + (di->bat_cap.permille) / 10 && + (di->bat_cap.permille / 10) < + di->bat->fg_params->maint_thres) { + dev_dbg(di->dev, + "battery reported full " + "but capacity dropping: %d\n", + di->bat_cap.permille / 10); + di->bat_cap.prev_percent = di->bat_cap.permille / 10; + di->bat_cap.prev_mah = di->bat_cap.mah; + + changed = true; + } + } else if (di->bat_cap.prev_percent != di->bat_cap.permille / 10) { + if (di->bat_cap.permille / 10 == 0) { + /* + * We will not report 0% unless we've got + * the LOW_BAT IRQ, no matter what the FG + * algorithm says. + */ + di->bat_cap.prev_percent = 1; + di->bat_cap.permille = 1; + di->bat_cap.prev_mah = 1; + di->bat_cap.mah = 1; + + changed = true; + } else if (!(!di->flags.charging && + (di->bat_cap.permille / 10) > + di->bat_cap.prev_percent) || init) { + /* + * We do not allow reported capacity to go up + * unless we're charging or if we're in init + */ + dev_dbg(di->dev, + "capacity changed from %d to %d (%d)\n", + di->bat_cap.prev_percent, + di->bat_cap.permille / 10, + di->bat_cap.permille); + di->bat_cap.prev_percent = di->bat_cap.permille / 10; + di->bat_cap.prev_mah = di->bat_cap.mah; + + changed = true; + } else { + dev_dbg(di->dev, "capacity not allowed to go up since " + "no charger is connected: %d to %d (%d)\n", + di->bat_cap.prev_percent, + di->bat_cap.permille / 10, + di->bat_cap.permille); + } + } + + if (changed) { + power_supply_changed(&di->fg_psy); + if (di->flags.fully_charged && di->flags.force_full) { + dev_dbg(di->dev, "Battery full, notifying.\n"); + di->flags.force_full = false; + sysfs_notify(&di->fg_kobject, NULL, "charge_full"); + } + sysfs_notify(&di->fg_kobject, NULL, "charge_now"); + } +} + +static void ab8500_fg_charge_state_to(struct ab8500_fg *di, + enum ab8500_fg_charge_state new_state) +{ + dev_dbg(di->dev, "Charge state from %d [%s] to %d [%s]\n", + di->charge_state, + charge_state[di->charge_state], + new_state, + charge_state[new_state]); + + di->charge_state = new_state; +} + +static void ab8500_fg_discharge_state_to(struct ab8500_fg *di, + enum ab8500_fg_discharge_state new_state) +{ + dev_dbg(di->dev, "Disharge state from %d [%s] to %d [%s]\n", + di->discharge_state, + discharge_state[di->discharge_state], + new_state, + discharge_state[new_state]); + + di->discharge_state = new_state; +} + +/** + * ab8500_fg_algorithm_charging() - FG algorithm for when charging + * @di: pointer to the ab8500_fg structure + * + * Battery capacity calculation state machine for when we're charging + */ +static void ab8500_fg_algorithm_charging(struct ab8500_fg *di) +{ + /* + * If we change to discharge mode + * we should start with recovery + */ + if (di->discharge_state != AB8500_FG_DISCHARGE_INIT_RECOVERY) + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_INIT_RECOVERY); + + switch (di->charge_state) { + case AB8500_FG_CHARGE_INIT: + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_charging); + + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT); + + break; + + case AB8500_FG_CHARGE_READOUT: + /* + * Read the FG and calculate the new capacity + */ + mutex_lock(&di->cc_lock); + if (!di->flags.conv_done) { + /* Wasn't the CC IRQ that got us here */ + mutex_unlock(&di->cc_lock); + dev_dbg(di->dev, "%s CC conv not done\n", + __func__); + + break; + } + di->flags.conv_done = false; + mutex_unlock(&di->cc_lock); + + ab8500_fg_calc_cap_charging(di); + + break; + + default: + break; + } + + /* Check capacity limits */ + ab8500_fg_check_capacity_limits(di, false); +} + +static void force_capacity(struct ab8500_fg *di) +{ + int cap; + + ab8500_fg_clear_cap_samples(di); + cap = di->bat_cap.user_mah; + if (cap > di->bat_cap.max_mah_design) { + dev_dbg(di->dev, "Remaining cap %d can't be bigger than total" + " %d\n", cap, di->bat_cap.max_mah_design); + cap = di->bat_cap.max_mah_design; + } + ab8500_fg_fill_cap_sample(di, di->bat_cap.user_mah); + di->bat_cap.permille = ab8500_fg_convert_mah_to_permille(di, cap); + di->bat_cap.mah = cap; + ab8500_fg_check_capacity_limits(di, true); +} + +static bool check_sysfs_capacity(struct ab8500_fg *di) +{ + int cap, lower, upper; + int cap_permille; + + cap = di->bat_cap.user_mah; + + cap_permille = ab8500_fg_convert_mah_to_permille(di, + di->bat_cap.user_mah); + + lower = di->bat_cap.permille - di->bat->fg_params->user_cap_limit * 10; + upper = di->bat_cap.permille + di->bat->fg_params->user_cap_limit * 10; + + if (lower < 0) + lower = 0; + /* 1000 is permille, -> 100 percent */ + if (upper > 1000) + upper = 1000; + + dev_dbg(di->dev, "Capacity limits:" + " (Lower: %d User: %d Upper: %d) [user: %d, was: %d]\n", + lower, cap_permille, upper, cap, di->bat_cap.mah); + + /* If within limits, use the saved capacity and exit estimation...*/ + if (cap_permille > lower && cap_permille < upper) { + dev_dbg(di->dev, "OK! Using users cap %d uAh now\n", cap); + force_capacity(di); + return true; + } + dev_dbg(di->dev, "Capacity from user out of limits, ignoring"); + return false; +} + +/** + * ab8500_fg_algorithm_discharging() - FG algorithm for when discharging + * @di: pointer to the ab8500_fg structure + * + * Battery capacity calculation state machine for when we're discharging + */ +static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) +{ + int sleep_time; + + /* If we change to charge mode we should start with init */ + if (di->charge_state != AB8500_FG_CHARGE_INIT) + ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT); + + switch (di->discharge_state) { + case AB8500_FG_DISCHARGE_INIT: + /* We use the FG IRQ to work on */ + di->init_cnt = 0; + di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_INITMEASURING); + + /* Intentional fallthrough */ + case AB8500_FG_DISCHARGE_INITMEASURING: + /* + * Discard a number of samples during startup. + * After that, use compensated voltage for a few + * samples to get an initial capacity. + * Then go to READOUT + */ + sleep_time = di->bat->fg_params->init_timer; + + /* Discard the first [x] seconds */ + if (di->init_cnt > + di->bat->fg_params->init_discard_time) { + ab8500_fg_calc_cap_discharge_voltage(di, true); + + ab8500_fg_check_capacity_limits(di, true); + } + + di->init_cnt += sleep_time; + if (di->init_cnt > di->bat->fg_params->init_total_time) + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT_INIT); + + break; + + case AB8500_FG_DISCHARGE_INIT_RECOVERY: + di->recovery_cnt = 0; + di->recovery_needed = true; + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_RECOVERY); + + /* Intentional fallthrough */ + + case AB8500_FG_DISCHARGE_RECOVERY: + sleep_time = di->bat->fg_params->recovery_sleep_timer; + + /* + * We should check the power consumption + * If low, go to READOUT (after x min) or + * RECOVERY_SLEEP if time left. + * If high, go to READOUT + */ + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + + if (ab8500_fg_is_low_curr(di, di->inst_curr)) { + if (di->recovery_cnt > + di->bat->fg_params->recovery_total_time) { + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_high_curr); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT); + di->recovery_needed = false; + } else { + queue_delayed_work(di->fg_wq, + &di->fg_periodic_work, + sleep_time * HZ); + } + di->recovery_cnt += sleep_time; + } else { + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_high_curr); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT); + } + break; + + case AB8500_FG_DISCHARGE_READOUT_INIT: + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_high_curr); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT); + break; + + case AB8500_FG_DISCHARGE_READOUT: + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + + if (ab8500_fg_is_low_curr(di, di->inst_curr)) { + /* Detect mode change */ + if (di->high_curr_mode) { + di->high_curr_mode = false; + di->high_curr_cnt = 0; + } + + if (di->recovery_needed) { + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_RECOVERY); + + queue_delayed_work(di->fg_wq, + &di->fg_periodic_work, 0); + + break; + } + + ab8500_fg_calc_cap_discharge_voltage(di, true); + } else { + mutex_lock(&di->cc_lock); + if (!di->flags.conv_done) { + /* Wasn't the CC IRQ that got us here */ + mutex_unlock(&di->cc_lock); + dev_dbg(di->dev, "%s CC conv not done\n", + __func__); + + break; + } + di->flags.conv_done = false; + mutex_unlock(&di->cc_lock); + + /* Detect mode change */ + if (!di->high_curr_mode) { + di->high_curr_mode = true; + di->high_curr_cnt = 0; + } + + di->high_curr_cnt += + di->bat->fg_params->accu_high_curr; + if (di->high_curr_cnt > + di->bat->fg_params->high_curr_time) + di->recovery_needed = true; + + ab8500_fg_calc_cap_discharge_fg(di); + } + + ab8500_fg_check_capacity_limits(di, false); + + break; + + case AB8500_FG_DISCHARGE_WAKEUP: + ab8500_fg_coulomb_counter(di, true); + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + + ab8500_fg_calc_cap_discharge_voltage(di, true); + + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_high_curr); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT); + + ab8500_fg_check_capacity_limits(di, false); + + break; + + default: + break; + } +} + +/** + * ab8500_fg_algorithm_calibrate() - Internal columb counter offset calibration + * @di: pointer to the ab8500_fg structure + * + */ +static void ab8500_fg_algorithm_calibrate(struct ab8500_fg *di) +{ + int ret; + + switch (di->calib_state) { + case AB8500_FG_CALIB_INIT: + dev_dbg(di->dev, "Calibration ongoing...\n"); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + CC_INT_CAL_N_AVG_MASK, CC_INT_CAL_SAMPLES_8); + if (ret < 0) + goto err; + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + CC_INTAVGOFFSET_ENA, CC_INTAVGOFFSET_ENA); + if (ret < 0) + goto err; + di->calib_state = AB8500_FG_CALIB_WAIT; + break; + case AB8500_FG_CALIB_END: + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + CC_MUXOFFSET, CC_MUXOFFSET); + if (ret < 0) + goto err; + di->flags.calibrate = false; + dev_dbg(di->dev, "Calibration done...\n"); + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + break; + case AB8500_FG_CALIB_WAIT: + dev_dbg(di->dev, "Calibration WFI\n"); + default: + break; + } + return; +err: + /* Something went wrong, don't calibrate then */ + dev_err(di->dev, "failed to calibrate the CC\n"); + di->flags.calibrate = false; + di->calib_state = AB8500_FG_CALIB_INIT; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); +} + +/** + * ab8500_fg_algorithm() - Entry point for the FG algorithm + * @di: pointer to the ab8500_fg structure + * + * Entry point for the battery capacity calculation state machine + */ +static void ab8500_fg_algorithm(struct ab8500_fg *di) +{ + if (di->flags.calibrate) + ab8500_fg_algorithm_calibrate(di); + else { + if (di->flags.charging) + ab8500_fg_algorithm_charging(di); + else + ab8500_fg_algorithm_discharging(di); + } + + dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d " + "%d %d %d %d %d %d %d\n", + di->bat_cap.max_mah_design, + di->bat_cap.mah, + di->bat_cap.permille, + di->bat_cap.level, + di->bat_cap.prev_mah, + di->bat_cap.prev_percent, + di->bat_cap.prev_level, + di->vbat, + di->inst_curr, + di->avg_curr, + di->accu_charge, + di->flags.charging, + di->charge_state, + di->discharge_state, + di->high_curr_mode, + di->recovery_needed); +} + +/** + * ab8500_fg_periodic_work() - Run the FG state machine periodically + * @work: pointer to the work_struct structure + * + * Work queue function for periodic work + */ +static void ab8500_fg_periodic_work(struct work_struct *work) +{ + struct ab8500_fg *di = container_of(work, struct ab8500_fg, + fg_periodic_work.work); + + if (di->init_capacity) { + /* A dummy read that will return 0 */ + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + /* Get an initial capacity calculation */ + ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_check_capacity_limits(di, true); + di->init_capacity = false; + + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + } else if (di->flags.user_cap) { + if (check_sysfs_capacity(di)) { + ab8500_fg_check_capacity_limits(di, true); + if (di->flags.charging) + ab8500_fg_charge_state_to(di, + AB8500_FG_CHARGE_INIT); + else + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT_INIT); + } + di->flags.user_cap = false; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + } else + ab8500_fg_algorithm(di); + +} + +/** + * ab8500_fg_check_hw_failure_work() - Check OVV_BAT condition + * @work: pointer to the work_struct structure + * + * Work queue function for checking the OVV_BAT condition + */ +static void ab8500_fg_check_hw_failure_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_fg *di = container_of(work, struct ab8500_fg, + fg_check_hw_failure_work.work); + + /* + * If we have had a battery over-voltage situation, + * check ovv-bit to see if it should be reset. + */ + if (di->flags.bat_ovv) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STAT_REG, + ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if ((reg_value & BATT_OVV) != BATT_OVV) { + dev_dbg(di->dev, "Battery recovered from OVV\n"); + di->flags.bat_ovv = false; + power_supply_changed(&di->fg_psy); + return; + } + + /* Not yet recovered from ovv, reschedule this test */ + queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, + round_jiffies(HZ)); + } +} + +/** + * ab8500_fg_low_bat_work() - Check LOW_BAT condition + * @work: pointer to the work_struct structure + * + * Work queue function for checking the LOW_BAT condition + */ +static void ab8500_fg_low_bat_work(struct work_struct *work) +{ + int vbat; + + struct ab8500_fg *di = container_of(work, struct ab8500_fg, + fg_low_bat_work.work); + + vbat = ab8500_fg_bat_voltage(di); + + /* Check if LOW_BAT still fulfilled */ + if (vbat < di->bat->fg_params->lowbat_threshold) { + di->flags.low_bat = true; + dev_warn(di->dev, "Battery voltage still LOW\n"); + + /* + * We need to re-schedule this check to be able to detect + * if the voltage increases again during charging + */ + queue_delayed_work(di->fg_wq, &di->fg_low_bat_work, + round_jiffies(LOW_BAT_CHECK_INTERVAL)); + } else { + di->flags.low_bat = false; + dev_warn(di->dev, "Battery voltage OK again\n"); + } + + /* This is needed to dispatch LOW_BAT */ + ab8500_fg_check_capacity_limits(di, false); + + /* Set this flag to check if LOW_BAT IRQ still occurs */ + di->flags.low_bat_delay = false; +} + +/** + * ab8500_fg_battok_calc - calculate the bit pattern corresponding + * to the target voltage. + * @di: pointer to the ab8500_fg structure + * @target target voltage + * + * Returns bit pattern closest to the target voltage + * valid return values are 0-14. (0-BATT_OK_MAX_NR_INCREMENTS) + */ + +static int ab8500_fg_battok_calc(struct ab8500_fg *di, int target) +{ + if (target > BATT_OK_MIN + + (BATT_OK_INCREMENT * BATT_OK_MAX_NR_INCREMENTS)) + return BATT_OK_MAX_NR_INCREMENTS; + if (target < BATT_OK_MIN) + return 0; + return (target - BATT_OK_MIN) / BATT_OK_INCREMENT; +} + +/** + * ab8500_fg_battok_init_hw_register - init battok levels + * @di: pointer to the ab8500_fg structure + * + */ + +static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di) +{ + int selected; + int sel0; + int sel1; + int cbp_sel0; + int cbp_sel1; + int ret; + int new_val; + + sel0 = di->bat->fg_params->battok_falling_th_sel0; + sel1 = di->bat->fg_params->battok_raising_th_sel1; + + cbp_sel0 = ab8500_fg_battok_calc(di, sel0); + cbp_sel1 = ab8500_fg_battok_calc(di, sel1); + + selected = BATT_OK_MIN + cbp_sel0 * BATT_OK_INCREMENT; + + if (selected != sel0) + dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n", + sel0, selected, cbp_sel0); + + selected = BATT_OK_MIN + cbp_sel1 * BATT_OK_INCREMENT; + + if (selected != sel1) + dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n", + sel1, selected, cbp_sel1); + + new_val = cbp_sel0 | (cbp_sel1 << 4); + + dev_dbg(di->dev, "using: %x %d %d\n", new_val, cbp_sel0, cbp_sel1); + ret = abx500_set_register_interruptible(di->dev, AB8500_SYS_CTRL2_BLOCK, + AB8500_BATT_OK_REG, new_val); + return ret; +} + +/** + * ab8500_fg_instant_work() - Run the FG state machine instantly + * @work: pointer to the work_struct structure + * + * Work queue function for instant work + */ +static void ab8500_fg_instant_work(struct work_struct *work) +{ + struct ab8500_fg *di = container_of(work, struct ab8500_fg, fg_work); + + ab8500_fg_algorithm(di); +} + +/** + * ab8500_fg_cc_data_end_handler() - isr to get battery avg current. + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + complete(&di->ab8500_fg_complete); + return IRQ_HANDLED; +} + +/** + * ab8500_fg_cc_convend_handler() - isr to get battery avg current. + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_cc_int_calib_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + di->calib_state = AB8500_FG_CALIB_END; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + return IRQ_HANDLED; +} + +/** + * ab8500_fg_cc_convend_handler() - isr to get battery avg current. + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_cc_convend_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + + queue_work(di->fg_wq, &di->fg_acc_cur_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_fg_batt_ovv_handler() - Battery OVV occured + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_batt_ovv_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + + dev_dbg(di->dev, "Battery OVV\n"); + di->flags.bat_ovv = true; + power_supply_changed(&di->fg_psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_fg_lowbatf_handler() - Battery voltage is below LOW threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_lowbatf_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + + if (!di->flags.low_bat_delay) { + dev_warn(di->dev, "Battery voltage is below LOW threshold\n"); + di->flags.low_bat_delay = true; + /* + * Start a timer to check LOW_BAT again after some time + * This is done to avoid shutdown on single voltage dips + */ + queue_delayed_work(di->fg_wq, &di->fg_low_bat_work, + round_jiffies(LOW_BAT_CHECK_INTERVAL)); + } + return IRQ_HANDLED; +} + +/** + * ab8500_fg_get_property() - get the fg properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the + * fg properties by reading the sysfs files. + * voltage_now: battery voltage + * current_now: battery instant current + * current_avg: battery average current + * charge_full_design: capacity where battery is considered full + * charge_now: battery capacity in nAh + * capacity: capacity in percent + * capacity_level: capacity level + * + * Returns error code in case of failure else 0 on success + */ +static int ab8500_fg_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + /* + * If battery is identified as unknown and charging of unknown + * batteries is disabled, we always report 100% capacity and + * capacity level UNKNOWN, since we can't calculate + * remaining capacity + */ + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (di->flags.bat_ovv) + val->intval = BATT_OVV_VALUE * 1000; + else + val->intval = di->vbat * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = di->inst_curr * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + val->intval = di->avg_curr * 1000; + break; + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + val->intval = ab8500_fg_convert_mah_to_uwh(di, + di->bat_cap.max_mah_design); + break; + case POWER_SUPPLY_PROP_ENERGY_FULL: + val->intval = ab8500_fg_convert_mah_to_uwh(di, + di->bat_cap.max_mah); + break; + case POWER_SUPPLY_PROP_ENERGY_NOW: + if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + di->flags.batt_id_received) + val->intval = ab8500_fg_convert_mah_to_uwh(di, + di->bat_cap.max_mah); + else + val->intval = ab8500_fg_convert_mah_to_uwh(di, + di->bat_cap.prev_mah); + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = di->bat_cap.max_mah_design; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = di->bat_cap.max_mah; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + di->flags.batt_id_received) + val->intval = di->bat_cap.max_mah; + else + val->intval = di->bat_cap.prev_mah; + break; + case POWER_SUPPLY_PROP_CAPACITY: + if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + di->flags.batt_id_received) + val->intval = 100; + else + val->intval = di->bat_cap.prev_percent; + break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + di->flags.batt_id_received) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; + else + val->intval = di->bat_cap.prev_level; + break; + default: + return -EINVAL; + } + return 0; +} + +static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_fg *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + + psy = (struct power_supply *)data; + ext = dev_get_drvdata(dev); + di = to_ab8500_fg_device_info(psy); + + /* + * For all psy where the name of your driver + * appears in any supplied_to + */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + if (ext->get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + switch (ret.intval) { + case POWER_SUPPLY_STATUS_UNKNOWN: + case POWER_SUPPLY_STATUS_DISCHARGING: + case POWER_SUPPLY_STATUS_NOT_CHARGING: + if (!di->flags.charging) + break; + di->flags.charging = false; + di->flags.fully_charged = false; + queue_work(di->fg_wq, &di->fg_work); + break; + case POWER_SUPPLY_STATUS_FULL: + if (di->flags.fully_charged) + break; + di->flags.fully_charged = true; + di->flags.force_full = true; + /* Save current capacity as maximum */ + di->bat_cap.max_mah = di->bat_cap.mah; + queue_work(di->fg_wq, &di->fg_work); + break; + case POWER_SUPPLY_STATUS_CHARGING: + if (di->flags.charging) + break; + di->flags.charging = true; + di->flags.fully_charged = false; + queue_work(di->fg_wq, &di->fg_work); + break; + }; + default: + break; + }; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + if (!di->flags.batt_id_received) { + const struct abx500_battery_type *b; + + b = &(di->bat->bat_type[di->bat->batt_id]); + + di->flags.batt_id_received = true; + + di->bat_cap.max_mah_design = + MILLI_TO_MICRO * + b->charge_full_design; + + di->bat_cap.max_mah = + di->bat_cap.max_mah_design; + + di->vbat_nom = b->nominal_voltage; + } + + if (ret.intval) + di->flags.batt_unknown = false; + else + di->flags.batt_unknown = true; + break; + default: + break; + } + break; + case POWER_SUPPLY_PROP_TEMP: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + if (di->flags.batt_id_received) + di->bat_temp = ret.intval; + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_fg_init_hw_registers() - Set up FG related registers + * @di: pointer to the ab8500_fg structure + * + * Set up battery OVV, low battery voltage registers + */ +static int ab8500_fg_init_hw_registers(struct ab8500_fg *di) +{ + int ret; + + /* Set VBAT OVV threshold */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_BATT_OVV, + BATT_OVV_TH_4P75, + BATT_OVV_TH_4P75); + if (ret) { + dev_err(di->dev, "failed to set BATT_OVV\n"); + goto out; + } + + /* Enable VBAT OVV detection */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_BATT_OVV, + BATT_OVV_ENA, + BATT_OVV_ENA); + if (ret) { + dev_err(di->dev, "failed to enable BATT_OVV\n"); + goto out; + } + + /* Low Battery Voltage */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_LOW_BAT_REG, + ab8500_volt_to_regval( + di->bat->fg_params->lowbat_threshold) << 1 | + LOW_BAT_ENABLE); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + goto out; + } + + /* Battery OK threshold */ + ret = ab8500_fg_battok_init_hw_register(di); + if (ret) { + dev_err(di->dev, "BattOk init write failed.\n"); + goto out; + } +out: + return ret; +} + +/** + * ab8500_fg_external_power_changed() - callback for power supply changes + * @psy: pointer to the structure power_supply + * + * This function is the entry point of the pointer external_power_changed + * of the structure power_supply. + * This function gets executed when there is a change in any external power + * supply that this driver needs to be notified of. + */ +static void ab8500_fg_external_power_changed(struct power_supply *psy) +{ + struct ab8500_fg *di = to_ab8500_fg_device_info(psy); + + class_for_each_device(power_supply_class, NULL, + &di->fg_psy, ab8500_fg_get_ext_psy_data); +} + +/** + * abab8500_fg_reinit_work() - work to reset the FG algorithm + * @work: pointer to the work_struct structure + * + * Used to reset the current battery capacity to be able to + * retrigger a new voltage base capacity calculation. For + * test and verification purpose. + */ +static void ab8500_fg_reinit_work(struct work_struct *work) +{ + struct ab8500_fg *di = container_of(work, struct ab8500_fg, + fg_reinit_work.work); + + if (di->flags.calibrate == false) { + dev_dbg(di->dev, "Resetting FG state machine to init.\n"); + ab8500_fg_clear_cap_samples(di); + ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT); + ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT); + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + + } else { + dev_err(di->dev, "Residual offset calibration ongoing " + "retrying..\n"); + /* Wait one second until next try*/ + queue_delayed_work(di->fg_wq, &di->fg_reinit_work, + round_jiffies(1)); + } +} + +/** + * ab8500_fg_reinit() - forces FG algorithm to reinitialize with current values + * + * This function can be used to force the FG algorithm to recalculate a new + * voltage based battery capacity. + */ +void ab8500_fg_reinit(void) +{ + struct ab8500_fg *di = ab8500_fg_get(); + /* User won't be notified if a null pointer returned. */ + if (di != NULL) + queue_delayed_work(di->fg_wq, &di->fg_reinit_work, 0); +} + +/* Exposure to the sysfs interface */ + +struct ab8500_fg_sysfs_entry { + struct attribute attr; + ssize_t (*show)(struct ab8500_fg *, char *); + ssize_t (*store)(struct ab8500_fg *, const char *, size_t); +}; + +static ssize_t charge_full_show(struct ab8500_fg *di, char *buf) +{ + return sprintf(buf, "%d\n", di->bat_cap.max_mah); +} + +static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf, + size_t count) +{ + unsigned long charge_full; + ssize_t ret = -EINVAL; + + ret = strict_strtoul(buf, 10, &charge_full); + + dev_dbg(di->dev, "Ret %zd charge_full %lu", ret, charge_full); + + if (!ret) { + di->bat_cap.max_mah = (int) charge_full; + ret = count; + } + return ret; +} + +static ssize_t charge_now_show(struct ab8500_fg *di, char *buf) +{ + return sprintf(buf, "%d\n", di->bat_cap.prev_mah); +} + +static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf, + size_t count) +{ + unsigned long charge_now; + ssize_t ret; + + ret = strict_strtoul(buf, 10, &charge_now); + + dev_dbg(di->dev, "Ret %zd charge_now %lu was %d", + ret, charge_now, di->bat_cap.prev_mah); + + if (!ret) { + di->bat_cap.user_mah = (int) charge_now; + di->flags.user_cap = true; + ret = count; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + } + return ret; +} + +static struct ab8500_fg_sysfs_entry charge_full_attr = + __ATTR(charge_full, 0644, charge_full_show, charge_full_store); + +static struct ab8500_fg_sysfs_entry charge_now_attr = + __ATTR(charge_now, 0644, charge_now_show, charge_now_store); + +static ssize_t +ab8500_fg_show(struct kobject *kobj, struct attribute *attr, char *buf) +{ + struct ab8500_fg_sysfs_entry *entry; + struct ab8500_fg *di; + + entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr); + di = container_of(kobj, struct ab8500_fg, fg_kobject); + + if (!entry->show) + return -EIO; + + return entry->show(di, buf); +} +static ssize_t +ab8500_fg_store(struct kobject *kobj, struct attribute *attr, const char *buf, + size_t count) +{ + struct ab8500_fg_sysfs_entry *entry; + struct ab8500_fg *di; + + entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr); + di = container_of(kobj, struct ab8500_fg, fg_kobject); + + if (!entry->store) + return -EIO; + + return entry->store(di, buf, count); +} + +static const struct sysfs_ops ab8500_fg_sysfs_ops = { + .show = ab8500_fg_show, + .store = ab8500_fg_store, +}; + +static struct attribute *ab8500_fg_attrs[] = { + &charge_full_attr.attr, + &charge_now_attr.attr, + NULL, +}; + +static struct kobj_type ab8500_fg_ktype = { + .sysfs_ops = &ab8500_fg_sysfs_ops, + .default_attrs = ab8500_fg_attrs, +}; + +/** + * ab8500_chargalg_sysfs_exit() - de-init of sysfs entry + * @di: pointer to the struct ab8500_chargalg + * + * This function removes the entry in sysfs. + */ +static void ab8500_fg_sysfs_exit(struct ab8500_fg *di) +{ + kobject_del(&di->fg_kobject); +} + +/** + * ab8500_chargalg_sysfs_init() - init of sysfs entry + * @di: pointer to the struct ab8500_chargalg + * + * This function adds an entry in sysfs. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_fg_sysfs_init(struct ab8500_fg *di) +{ + int ret = 0; + + ret = kobject_init_and_add(&di->fg_kobject, + &ab8500_fg_ktype, + NULL, "battery"); + if (ret < 0) + dev_err(di->dev, "failed to create sysfs entry\n"); + + return ret; +} +/* Exposure to the sysfs interface <<END>> */ + +#if defined(CONFIG_PM) +static int ab8500_fg_resume(struct platform_device *pdev) +{ + struct ab8500_fg *di = platform_get_drvdata(pdev); + + /* + * Change state if we're not charging. If we're charging we will wake + * up on the FG IRQ + */ + if (!di->flags.charging) { + ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_WAKEUP); + queue_work(di->fg_wq, &di->fg_work); + } + + return 0; +} + +static int ab8500_fg_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_fg *di = platform_get_drvdata(pdev); + + flush_delayed_work(&di->fg_periodic_work); + + /* + * If the FG is enabled we will disable it before going to suspend + * only if we're not charging + */ + if (di->flags.fg_enabled && !di->flags.charging) + ab8500_fg_coulomb_counter(di, false); + + return 0; +} +#else +#define ab8500_fg_suspend NULL +#define ab8500_fg_resume NULL +#endif + +static int __devexit ab8500_fg_remove(struct platform_device *pdev) +{ + int ret = 0; + struct ab8500_fg *di = platform_get_drvdata(pdev); + + list_del(&di->node); + + /* Disable coulomb counter */ + ret = ab8500_fg_coulomb_counter(di, false); + if (ret) + dev_err(di->dev, "failed to disable coulomb counter\n"); + + destroy_workqueue(di->fg_wq); + ab8500_fg_sysfs_exit(di); + + flush_scheduled_work(); + power_supply_unregister(&di->fg_psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + return ret; +} + +/* ab8500 fg driver interrupts and their respective isr */ +static struct ab8500_fg_interrupts ab8500_fg_irq[] = { + {"NCONV_ACCU", ab8500_fg_cc_convend_handler}, + {"BATT_OVV", ab8500_fg_batt_ovv_handler}, + {"LOW_BAT_F", ab8500_fg_lowbatf_handler}, + {"CC_INT_CALIB", ab8500_fg_cc_int_calib_handler}, + {"CCEOC", ab8500_fg_cc_data_end_handler}, +}; + +static int __devinit ab8500_fg_probe(struct platform_device *pdev) +{ + int i, irq; + int ret = 0; + struct abx500_bm_plat_data *plat_data; + + struct ab8500_fg *di = + kzalloc(sizeof(struct ab8500_fg), GFP_KERNEL); + if (!di) + return -ENOMEM; + + mutex_init(&di->cc_lock); + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* get fg specific platform data */ + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->fg; + if (!di->pdata) { + dev_err(di->dev, "no fg platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* get battery specific platform data */ + di->bat = plat_data->battery; + if (!di->bat) { + dev_err(di->dev, "no battery platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + di->fg_psy.name = "ab8500_fg"; + di->fg_psy.type = POWER_SUPPLY_TYPE_BATTERY; + di->fg_psy.properties = ab8500_fg_props; + di->fg_psy.num_properties = ARRAY_SIZE(ab8500_fg_props); + di->fg_psy.get_property = ab8500_fg_get_property; + di->fg_psy.supplied_to = di->pdata->supplied_to; + di->fg_psy.num_supplicants = di->pdata->num_supplicants; + di->fg_psy.external_power_changed = ab8500_fg_external_power_changed; + + di->bat_cap.max_mah_design = MILLI_TO_MICRO * + di->bat->bat_type[di->bat->batt_id].charge_full_design; + + di->bat_cap.max_mah = di->bat_cap.max_mah_design; + + di->vbat_nom = di->bat->bat_type[di->bat->batt_id].nominal_voltage; + + di->init_capacity = true; + + ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT); + ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT); + + /* Create a work queue for running the FG algorithm */ + di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq"); + if (di->fg_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for running the fg algorithm instantly */ + INIT_WORK(&di->fg_work, ab8500_fg_instant_work); + + /* Init work for getting the battery accumulated current */ + INIT_WORK(&di->fg_acc_cur_work, ab8500_fg_acc_cur_work); + + /* Init work for reinitialising the fg algorithm */ + INIT_DELAYED_WORK_DEFERRABLE(&di->fg_reinit_work, + ab8500_fg_reinit_work); + + /* Work delayed Queue to run the state machine */ + INIT_DELAYED_WORK_DEFERRABLE(&di->fg_periodic_work, + ab8500_fg_periodic_work); + + /* Work to check low battery condition */ + INIT_DELAYED_WORK_DEFERRABLE(&di->fg_low_bat_work, + ab8500_fg_low_bat_work); + + /* Init work for HW failure check */ + INIT_DELAYED_WORK_DEFERRABLE(&di->fg_check_hw_failure_work, + ab8500_fg_check_hw_failure_work); + + /* Initialize OVV, and other registers */ + ret = ab8500_fg_init_hw_registers(di); + if (ret) { + dev_err(di->dev, "failed to initialize registers\n"); + goto free_inst_curr_wq; + } + + /* Consider battery unknown until we're informed otherwise */ + di->flags.batt_unknown = true; + di->flags.batt_id_received = false; + + /* Register FG power supply class */ + ret = power_supply_register(di->dev, &di->fg_psy); + if (ret) { + dev_err(di->dev, "failed to register FG psy\n"); + goto free_inst_curr_wq; + } + + di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer); + ab8500_fg_coulomb_counter(di, true); + + /* Initialize completion used to notify completion of inst current */ + init_completion(&di->ab8500_fg_complete); + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_fg_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_fg_irq[i].name, di); + + if (ret != 0) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_fg_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_fg_irq[i].name, irq, ret); + } + di->irq = platform_get_irq_byname(pdev, "CCEOC"); + disable_irq(di->irq); + + platform_set_drvdata(pdev, di); + + ret = ab8500_fg_sysfs_init(di); + if (ret) { + dev_err(di->dev, "failed to create sysfs entry\n"); + goto free_irq; + } + + /* Calibrate the fg first time */ + di->flags.calibrate = true; + di->calib_state = AB8500_FG_CALIB_INIT; + + /* Use room temp as default value until we get an update from driver. */ + di->bat_temp = 210; + + /* Run the FG algorithm */ + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + + list_add_tail(&di->node, &ab8500_fg_list); + + return ret; + +free_irq: + power_supply_unregister(&di->fg_psy); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name); + free_irq(irq, di); + } +free_inst_curr_wq: + destroy_workqueue(di->fg_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver ab8500_fg_driver = { + .probe = ab8500_fg_probe, + .remove = __devexit_p(ab8500_fg_remove), + .suspend = ab8500_fg_suspend, + .resume = ab8500_fg_resume, + .driver = { + .name = "ab8500-fg", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_fg_init(void) +{ + return platform_driver_register(&ab8500_fg_driver); +} + +static void __exit ab8500_fg_exit(void) +{ + platform_driver_unregister(&ab8500_fg_driver); +} + +subsys_initcall_sync(ab8500_fg_init); +module_exit(ab8500_fg_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski"); +MODULE_ALIAS("platform:ab8500-fg"); +MODULE_DESCRIPTION("AB8500 Fuel Gauge driver"); diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c new file mode 100644 index 000000000000..804b88c760d6 --- /dev/null +++ b/drivers/power/abx500_chargalg.c @@ -0,0 +1,1921 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Charging algorithm driver for abx500 variants + * + * License Terms: GNU General Public License v2 + * Authors: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/completion.h> +#include <linux/workqueue.h> +#include <linux/kobject.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ux500_chargalg.h> +#include <linux/mfd/abx500/ab8500-bm.h> + +/* Watchdog kick interval */ +#define CHG_WD_INTERVAL (6 * HZ) + +/* End-of-charge criteria counter */ +#define EOC_COND_CNT 10 + +/* Recharge criteria counter */ +#define RCH_COND_CNT 3 + +#define to_abx500_chargalg_device_info(x) container_of((x), \ + struct abx500_chargalg, chargalg_psy); + +enum abx500_chargers { + NO_CHG, + AC_CHG, + USB_CHG, +}; + +struct abx500_chargalg_charger_info { + enum abx500_chargers conn_chg; + enum abx500_chargers prev_conn_chg; + enum abx500_chargers online_chg; + enum abx500_chargers prev_online_chg; + enum abx500_chargers charger_type; + bool usb_chg_ok; + bool ac_chg_ok; + int usb_volt; + int usb_curr; + int ac_volt; + int ac_curr; + int usb_vset; + int usb_iset; + int ac_vset; + int ac_iset; +}; + +struct abx500_chargalg_suspension_status { + bool suspended_change; + bool ac_suspended; + bool usb_suspended; +}; + +struct abx500_chargalg_battery_data { + int temp; + int volt; + int avg_curr; + int inst_curr; + int percent; +}; + +enum abx500_chargalg_states { + STATE_HANDHELD_INIT, + STATE_HANDHELD, + STATE_CHG_NOT_OK_INIT, + STATE_CHG_NOT_OK, + STATE_HW_TEMP_PROTECT_INIT, + STATE_HW_TEMP_PROTECT, + STATE_NORMAL_INIT, + STATE_NORMAL, + STATE_WAIT_FOR_RECHARGE_INIT, + STATE_WAIT_FOR_RECHARGE, + STATE_MAINTENANCE_A_INIT, + STATE_MAINTENANCE_A, + STATE_MAINTENANCE_B_INIT, + STATE_MAINTENANCE_B, + STATE_TEMP_UNDEROVER_INIT, + STATE_TEMP_UNDEROVER, + STATE_TEMP_LOWHIGH_INIT, + STATE_TEMP_LOWHIGH, + STATE_SUSPENDED_INIT, + STATE_SUSPENDED, + STATE_OVV_PROTECT_INIT, + STATE_OVV_PROTECT, + STATE_SAFETY_TIMER_EXPIRED_INIT, + STATE_SAFETY_TIMER_EXPIRED, + STATE_BATT_REMOVED_INIT, + STATE_BATT_REMOVED, + STATE_WD_EXPIRED_INIT, + STATE_WD_EXPIRED, +}; + +static const char *states[] = { + "HANDHELD_INIT", + "HANDHELD", + "CHG_NOT_OK_INIT", + "CHG_NOT_OK", + "HW_TEMP_PROTECT_INIT", + "HW_TEMP_PROTECT", + "NORMAL_INIT", + "NORMAL", + "WAIT_FOR_RECHARGE_INIT", + "WAIT_FOR_RECHARGE", + "MAINTENANCE_A_INIT", + "MAINTENANCE_A", + "MAINTENANCE_B_INIT", + "MAINTENANCE_B", + "TEMP_UNDEROVER_INIT", + "TEMP_UNDEROVER", + "TEMP_LOWHIGH_INIT", + "TEMP_LOWHIGH", + "SUSPENDED_INIT", + "SUSPENDED", + "OVV_PROTECT_INIT", + "OVV_PROTECT", + "SAFETY_TIMER_EXPIRED_INIT", + "SAFETY_TIMER_EXPIRED", + "BATT_REMOVED_INIT", + "BATT_REMOVED", + "WD_EXPIRED_INIT", + "WD_EXPIRED", +}; + +struct abx500_chargalg_events { + bool batt_unknown; + bool mainextchnotok; + bool batt_ovv; + bool batt_rem; + bool btemp_underover; + bool btemp_lowhigh; + bool main_thermal_prot; + bool usb_thermal_prot; + bool main_ovv; + bool vbus_ovv; + bool usbchargernotok; + bool safety_timer_expired; + bool maintenance_timer_expired; + bool ac_wd_expired; + bool usb_wd_expired; + bool ac_cv_active; + bool usb_cv_active; + bool vbus_collapsed; +}; + +/** + * struct abx500_charge_curr_maximization - Charger maximization parameters + * @original_iset: the non optimized/maximised charger current + * @current_iset: the charging current used at this moment + * @test_delta_i: the delta between the current we want to charge and the + current that is really going into the battery + * @condition_cnt: number of iterations needed before a new charger current + is set + * @max_current: maximum charger current + * @wait_cnt: to avoid too fast current step down in case of charger + * voltage collapse, we insert this delay between step + * down + * @level: tells in how many steps the charging current has been + increased + */ +struct abx500_charge_curr_maximization { + int original_iset; + int current_iset; + int test_delta_i; + int condition_cnt; + int max_current; + int wait_cnt; + u8 level; +}; + +enum maxim_ret { + MAXIM_RET_NOACTION, + MAXIM_RET_CHANGE, + MAXIM_RET_IBAT_TOO_HIGH, +}; + +/** + * struct abx500_chargalg - abx500 Charging algorithm device information + * @dev: pointer to the structure device + * @charge_status: battery operating status + * @eoc_cnt: counter used to determine end-of_charge + * @rch_cnt: counter used to determine start of recharge + * @maintenance_chg: indicate if maintenance charge is active + * @t_hyst_norm temperature hysteresis when the temperature has been + * over or under normal limits + * @t_hyst_lowhigh temperature hysteresis when the temperature has been + * over or under the high or low limits + * @charge_state: current state of the charging algorithm + * @ccm charging current maximization parameters + * @chg_info: information about connected charger types + * @batt_data: data of the battery + * @susp_status: current charger suspension status + * @pdata: pointer to the abx500_chargalg platform data + * @bat: pointer to the abx500_bm platform data + * @chargalg_psy: structure that holds the battery properties exposed by + * the charging algorithm + * @events: structure for information about events triggered + * @chargalg_wq: work queue for running the charging algorithm + * @chargalg_periodic_work: work to run the charging algorithm periodically + * @chargalg_wd_work: work to kick the charger watchdog periodically + * @chargalg_work: work to run the charging algorithm instantly + * @safety_timer: charging safety timer + * @maintenance_timer: maintenance charging timer + * @chargalg_kobject: structure of type kobject + */ +struct abx500_chargalg { + struct device *dev; + int charge_status; + int eoc_cnt; + int rch_cnt; + bool maintenance_chg; + int t_hyst_norm; + int t_hyst_lowhigh; + enum abx500_chargalg_states charge_state; + struct abx500_charge_curr_maximization ccm; + struct abx500_chargalg_charger_info chg_info; + struct abx500_chargalg_battery_data batt_data; + struct abx500_chargalg_suspension_status susp_status; + struct abx500_chargalg_platform_data *pdata; + struct abx500_bm_data *bat; + struct power_supply chargalg_psy; + struct ux500_charger *ac_chg; + struct ux500_charger *usb_chg; + struct abx500_chargalg_events events; + struct workqueue_struct *chargalg_wq; + struct delayed_work chargalg_periodic_work; + struct delayed_work chargalg_wd_work; + struct work_struct chargalg_work; + struct timer_list safety_timer; + struct timer_list maintenance_timer; + struct kobject chargalg_kobject; +}; + +/* Main battery properties */ +static enum power_supply_property abx500_chargalg_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, +}; + +/** + * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer + * @data: pointer to the abx500_chargalg structure + * + * This function gets called when the safety timer for the charger + * expires + */ +static void abx500_chargalg_safety_timer_expired(unsigned long data) +{ + struct abx500_chargalg *di = (struct abx500_chargalg *) data; + dev_err(di->dev, "Safety timer expired\n"); + di->events.safety_timer_expired = true; + + /* Trigger execution of the algorithm instantly */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_maintenance_timer_expired() - Expiration of + * the maintenance timer + * @i: pointer to the abx500_chargalg structure + * + * This function gets called when the maintenence timer + * expires + */ +static void abx500_chargalg_maintenance_timer_expired(unsigned long data) +{ + + struct abx500_chargalg *di = (struct abx500_chargalg *) data; + dev_dbg(di->dev, "Maintenance timer expired\n"); + di->events.maintenance_timer_expired = true; + + /* Trigger execution of the algorithm instantly */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_state_to() - Change charge state + * @di: pointer to the abx500_chargalg structure + * + * This function gets called when a charge state change should occur + */ +static void abx500_chargalg_state_to(struct abx500_chargalg *di, + enum abx500_chargalg_states state) +{ + dev_dbg(di->dev, + "State changed: %s (From state: [%d] %s =to=> [%d] %s )\n", + di->charge_state == state ? "NO" : "YES", + di->charge_state, + states[di->charge_state], + state, + states[state]); + + di->charge_state = state; +} + +/** + * abx500_chargalg_check_charger_connection() - Check charger connection change + * @di: pointer to the abx500_chargalg structure + * + * This function will check if there is a change in the charger connection + * and change charge state accordingly. AC has precedence over USB. + */ +static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di) +{ + if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg || + di->susp_status.suspended_change) { + /* + * Charger state changed or suspension + * has changed since last update + */ + if ((di->chg_info.conn_chg & AC_CHG) && + !di->susp_status.ac_suspended) { + dev_dbg(di->dev, "Charging source is AC\n"); + if (di->chg_info.charger_type != AC_CHG) { + di->chg_info.charger_type = AC_CHG; + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } + } else if ((di->chg_info.conn_chg & USB_CHG) && + !di->susp_status.usb_suspended) { + dev_dbg(di->dev, "Charging source is USB\n"); + di->chg_info.charger_type = USB_CHG; + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } else if (di->chg_info.conn_chg && + (di->susp_status.ac_suspended || + di->susp_status.usb_suspended)) { + dev_dbg(di->dev, "Charging is suspended\n"); + di->chg_info.charger_type = NO_CHG; + abx500_chargalg_state_to(di, STATE_SUSPENDED_INIT); + } else { + dev_dbg(di->dev, "Charging source is OFF\n"); + di->chg_info.charger_type = NO_CHG; + abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); + } + di->chg_info.prev_conn_chg = di->chg_info.conn_chg; + di->susp_status.suspended_change = false; + } + return di->chg_info.conn_chg; +} + +/** + * abx500_chargalg_start_safety_timer() - Start charging safety timer + * @di: pointer to the abx500_chargalg structure + * + * The safety timer is used to avoid overcharging of old or bad batteries. + * There are different timers for AC and USB + */ +static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) +{ + unsigned long timer_expiration = 0; + + switch (di->chg_info.charger_type) { + case AC_CHG: + timer_expiration = + round_jiffies(jiffies + + (di->bat->main_safety_tmr_h * 3600 * HZ)); + break; + + case USB_CHG: + timer_expiration = + round_jiffies(jiffies + + (di->bat->usb_safety_tmr_h * 3600 * HZ)); + break; + + default: + dev_err(di->dev, "Unknown charger to charge from\n"); + break; + } + + di->events.safety_timer_expired = false; + di->safety_timer.expires = timer_expiration; + if (!timer_pending(&di->safety_timer)) + add_timer(&di->safety_timer); + else + mod_timer(&di->safety_timer, timer_expiration); +} + +/** + * abx500_chargalg_stop_safety_timer() - Stop charging safety timer + * @di: pointer to the abx500_chargalg structure + * + * The safety timer is stopped whenever the NORMAL state is exited + */ +static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di) +{ + di->events.safety_timer_expired = false; + del_timer(&di->safety_timer); +} + +/** + * abx500_chargalg_start_maintenance_timer() - Start charging maintenance timer + * @di: pointer to the abx500_chargalg structure + * @duration: duration of ther maintenance timer in hours + * + * The maintenance timer is used to maintain the charge in the battery once + * the battery is considered full. These timers are chosen to match the + * discharge curve of the battery + */ +static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di, + int duration) +{ + unsigned long timer_expiration; + + /* Convert from hours to jiffies */ + timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ)); + + di->events.maintenance_timer_expired = false; + di->maintenance_timer.expires = timer_expiration; + if (!timer_pending(&di->maintenance_timer)) + add_timer(&di->maintenance_timer); + else + mod_timer(&di->maintenance_timer, timer_expiration); +} + +/** + * abx500_chargalg_stop_maintenance_timer() - Stop maintenance timer + * @di: pointer to the abx500_chargalg structure + * + * The maintenance timer is stopped whenever maintenance ends or when another + * state is entered + */ +static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di) +{ + di->events.maintenance_timer_expired = false; + del_timer(&di->maintenance_timer); +} + +/** + * abx500_chargalg_kick_watchdog() - Kick charger watchdog + * @di: pointer to the abx500_chargalg structure + * + * The charger watchdog have to be kicked periodically whenever the charger is + * on, else the ABB will reset the system + */ +static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di) +{ + /* Check if charger exists and kick watchdog if charging */ + if (di->ac_chg && di->ac_chg->ops.kick_wd && + di->chg_info.online_chg & AC_CHG) + return di->ac_chg->ops.kick_wd(di->ac_chg); + else if (di->usb_chg && di->usb_chg->ops.kick_wd && + di->chg_info.online_chg & USB_CHG) + return di->usb_chg->ops.kick_wd(di->usb_chg); + + return -ENXIO; +} + +/** + * abx500_chargalg_ac_en() - Turn on/off the AC charger + * @di: pointer to the abx500_chargalg structure + * @enable: charger on/off + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * The AC charger will be turned on/off with the requested charge voltage and + * current + */ +static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable, + int vset, int iset) +{ + if (!di->ac_chg || !di->ac_chg->ops.enable) + return -ENXIO; + + /* Select maximum of what both the charger and the battery supports */ + if (di->ac_chg->max_out_volt) + vset = min(vset, di->ac_chg->max_out_volt); + if (di->ac_chg->max_out_curr) + iset = min(iset, di->ac_chg->max_out_curr); + + di->chg_info.ac_iset = iset; + di->chg_info.ac_vset = vset; + + return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset); +} + +/** + * abx500_chargalg_usb_en() - Turn on/off the USB charger + * @di: pointer to the abx500_chargalg structure + * @enable: charger on/off + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * The USB charger will be turned on/off with the requested charge voltage and + * current + */ +static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable, + int vset, int iset) +{ + if (!di->usb_chg || !di->usb_chg->ops.enable) + return -ENXIO; + + /* Select maximum of what both the charger and the battery supports */ + if (di->usb_chg->max_out_volt) + vset = min(vset, di->usb_chg->max_out_volt); + if (di->usb_chg->max_out_curr) + iset = min(iset, di->usb_chg->max_out_curr); + + di->chg_info.usb_iset = iset; + di->chg_info.usb_vset = vset; + + return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset); +} + +/** + * abx500_chargalg_update_chg_curr() - Update charger current + * @di: pointer to the abx500_chargalg structure + * @iset: requested charger output current + * + * The charger output current will be updated for the charger + * that is currently in use + */ +static int abx500_chargalg_update_chg_curr(struct abx500_chargalg *di, + int iset) +{ + /* Check if charger exists and update current if charging */ + if (di->ac_chg && di->ac_chg->ops.update_curr && + di->chg_info.charger_type & AC_CHG) { + /* + * Select maximum of what both the charger + * and the battery supports + */ + if (di->ac_chg->max_out_curr) + iset = min(iset, di->ac_chg->max_out_curr); + + di->chg_info.ac_iset = iset; + + return di->ac_chg->ops.update_curr(di->ac_chg, iset); + } else if (di->usb_chg && di->usb_chg->ops.update_curr && + di->chg_info.charger_type & USB_CHG) { + /* + * Select maximum of what both the charger + * and the battery supports + */ + if (di->usb_chg->max_out_curr) + iset = min(iset, di->usb_chg->max_out_curr); + + di->chg_info.usb_iset = iset; + + return di->usb_chg->ops.update_curr(di->usb_chg, iset); + } + + return -ENXIO; +} + +/** + * abx500_chargalg_stop_charging() - Stop charging + * @di: pointer to the abx500_chargalg structure + * + * This function is called from any state where charging should be stopped. + * All charging is disabled and all status parameters and timers are changed + * accordingly + */ +static void abx500_chargalg_stop_charging(struct abx500_chargalg *di) +{ + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + di->maintenance_chg = false; + cancel_delayed_work(&di->chargalg_wd_work); + power_supply_changed(&di->chargalg_psy); +} + +/** + * abx500_chargalg_hold_charging() - Pauses charging + * @di: pointer to the abx500_chargalg structure + * + * This function is called in the case where maintenance charging has been + * disabled and instead a battery voltage mode is entered to check when the + * battery voltage has reached a certain recharge voltage + */ +static void abx500_chargalg_hold_charging(struct abx500_chargalg *di) +{ + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + di->maintenance_chg = false; + cancel_delayed_work(&di->chargalg_wd_work); + power_supply_changed(&di->chargalg_psy); +} + +/** + * abx500_chargalg_start_charging() - Start the charger + * @di: pointer to the abx500_chargalg structure + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * A charger will be enabled depending on the requested charger type that was + * detected previously. + */ +static void abx500_chargalg_start_charging(struct abx500_chargalg *di, + int vset, int iset) +{ + switch (di->chg_info.charger_type) { + case AC_CHG: + dev_dbg(di->dev, + "AC parameters: Vset %d, Ich %d\n", vset, iset); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_ac_en(di, true, vset, iset); + break; + + case USB_CHG: + dev_dbg(di->dev, + "USB parameters: Vset %d, Ich %d\n", vset, iset); + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, true, vset, iset); + break; + + default: + dev_err(di->dev, "Unknown charger to charge from\n"); + break; + } +} + +/** + * abx500_chargalg_check_temp() - Check battery temperature ranges + * @di: pointer to the abx500_chargalg structure + * + * The battery temperature is checked against the predefined limits and the + * charge state is changed accordingly + */ +static void abx500_chargalg_check_temp(struct abx500_chargalg *di) +{ + if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) && + di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) { + /* Temp OK! */ + di->events.btemp_underover = false; + di->events.btemp_lowhigh = false; + di->t_hyst_norm = 0; + di->t_hyst_lowhigh = 0; + } else { + if (((di->batt_data.temp >= di->bat->temp_high) && + (di->batt_data.temp < + (di->bat->temp_over - di->t_hyst_lowhigh))) || + ((di->batt_data.temp > + (di->bat->temp_under + di->t_hyst_lowhigh)) && + (di->batt_data.temp <= di->bat->temp_low))) { + /* TEMP minor!!!!! */ + di->events.btemp_underover = false; + di->events.btemp_lowhigh = true; + di->t_hyst_norm = di->bat->temp_hysteresis; + di->t_hyst_lowhigh = 0; + } else if (di->batt_data.temp <= di->bat->temp_under || + di->batt_data.temp >= di->bat->temp_over) { + /* TEMP major!!!!! */ + di->events.btemp_underover = true; + di->events.btemp_lowhigh = false; + di->t_hyst_norm = 0; + di->t_hyst_lowhigh = di->bat->temp_hysteresis; + } else { + /* Within hysteresis */ + dev_dbg(di->dev, "Within hysteresis limit temp: %d " + "hyst_lowhigh %d, hyst normal %d\n", + di->batt_data.temp, di->t_hyst_lowhigh, + di->t_hyst_norm); + } + } +} + +/** + * abx500_chargalg_check_charger_voltage() - Check charger voltage + * @di: pointer to the abx500_chargalg structure + * + * Charger voltage is checked against maximum limit + */ +static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di) +{ + if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max) + di->chg_info.usb_chg_ok = false; + else + di->chg_info.usb_chg_ok = true; + + if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max) + di->chg_info.ac_chg_ok = false; + else + di->chg_info.ac_chg_ok = true; + +} + +/** + * abx500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled + * @di: pointer to the abx500_chargalg structure + * + * End-of-charge criteria is fulfilled when the battery voltage is above a + * certain limit and the battery current is below a certain limit for a + * predefined number of consecutive seconds. If true, the battery is full + */ +static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) +{ + if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING && + di->charge_state == STATE_NORMAL && + !di->maintenance_chg && (di->batt_data.volt >= + di->bat->bat_type[di->bat->batt_id].termination_vol || + di->events.usb_cv_active || di->events.ac_cv_active) && + di->batt_data.avg_curr < + di->bat->bat_type[di->bat->batt_id].termination_curr && + di->batt_data.avg_curr > 0) { + if (++di->eoc_cnt >= EOC_COND_CNT) { + di->eoc_cnt = 0; + di->charge_status = POWER_SUPPLY_STATUS_FULL; + di->maintenance_chg = true; + dev_dbg(di->dev, "EOC reached!\n"); + power_supply_changed(&di->chargalg_psy); + } else { + dev_dbg(di->dev, + " EOC limit reached for the %d" + " time, out of %d before EOC\n", + di->eoc_cnt, + EOC_COND_CNT); + } + } else { + di->eoc_cnt = 0; + } +} + +static void init_maxim_chg_curr(struct abx500_chargalg *di) +{ + di->ccm.original_iset = + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; + di->ccm.current_iset = + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; + di->ccm.test_delta_i = di->bat->maxi->charger_curr_step; + di->ccm.max_current = di->bat->maxi->chg_curr; + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.level = 0; +} + +/** + * abx500_chargalg_chg_curr_maxim - increases the charger current to + * compensate for the system load + * @di pointer to the abx500_chargalg structure + * + * This maximization function is used to raise the charger current to get the + * battery current as close to the optimal value as possible. The battery + * current during charging is affected by the system load + */ +static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) +{ + int delta_i; + + if (!di->bat->maxi->ena_maxi) + return MAXIM_RET_NOACTION; + + delta_i = di->ccm.original_iset - di->batt_data.inst_curr; + + if (di->events.vbus_collapsed) { + dev_dbg(di->dev, "Charger voltage has collapsed %d\n", + di->ccm.wait_cnt); + if (di->ccm.wait_cnt == 0) { + dev_dbg(di->dev, "lowering current\n"); + di->ccm.wait_cnt++; + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.max_current = + di->ccm.current_iset - di->ccm.test_delta_i; + di->ccm.current_iset = di->ccm.max_current; + di->ccm.level--; + return MAXIM_RET_CHANGE; + } else { + dev_dbg(di->dev, "waiting\n"); + /* Let's go in here twice before lowering curr again */ + di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3; + return MAXIM_RET_NOACTION; + } + } + + di->ccm.wait_cnt = 0; + + if ((di->batt_data.inst_curr > di->ccm.original_iset)) { + dev_dbg(di->dev, " Maximization Ibat (%dmA) too high" + " (limit %dmA) (current iset: %dmA)!\n", + di->batt_data.inst_curr, di->ccm.original_iset, + di->ccm.current_iset); + + if (di->ccm.current_iset == di->ccm.original_iset) + return MAXIM_RET_NOACTION; + + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.current_iset = di->ccm.original_iset; + di->ccm.level = 0; + + return MAXIM_RET_IBAT_TOO_HIGH; + } + + if (delta_i > di->ccm.test_delta_i && + (di->ccm.current_iset + di->ccm.test_delta_i) < + di->ccm.max_current) { + if (di->ccm.condition_cnt-- == 0) { + /* Increse the iset with cco.test_delta_i */ + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.current_iset += di->ccm.test_delta_i; + di->ccm.level++; + dev_dbg(di->dev, " Maximization needed, increase" + " with %d mA to %dmA (Optimal ibat: %d)" + " Level %d\n", + di->ccm.test_delta_i, + di->ccm.current_iset, + di->ccm.original_iset, + di->ccm.level); + return MAXIM_RET_CHANGE; + } else { + return MAXIM_RET_NOACTION; + } + } else { + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + return MAXIM_RET_NOACTION; + } +} + +static void handle_maxim_chg_curr(struct abx500_chargalg *di) +{ + enum maxim_ret ret; + int result; + + ret = abx500_chargalg_chg_curr_maxim(di); + switch (ret) { + case MAXIM_RET_CHANGE: + result = abx500_chargalg_update_chg_curr(di, + di->ccm.current_iset); + if (result) + dev_err(di->dev, "failed to set chg curr\n"); + break; + case MAXIM_RET_IBAT_TOO_HIGH: + result = abx500_chargalg_update_chg_curr(di, + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + if (result) + dev_err(di->dev, "failed to set chg curr\n"); + break; + + case MAXIM_RET_NOACTION: + default: + /* Do nothing..*/ + break; + } +} + +static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct abx500_chargalg *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + + psy = (struct power_supply *)data; + ext = dev_get_drvdata(dev); + di = to_abx500_chargalg_device_info(psy); + /* For all psy where the driver name appears in any supplied_to */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + /* Initialize chargers if not already done */ + if (!di->ac_chg && + ext->type == POWER_SUPPLY_TYPE_MAINS) + di->ac_chg = psy_to_ux500_charger(ext); + else if (!di->usb_chg && + ext->type == POWER_SUPPLY_TYPE_USB) + di->usb_chg = psy_to_ux500_charger(ext); + + if (ext->get_property(ext, prop, &ret)) + continue; + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + /* Battery present */ + if (ret.intval) + di->events.batt_rem = false; + /* Battery removed */ + else + di->events.batt_rem = true; + break; + case POWER_SUPPLY_TYPE_MAINS: + /* AC disconnected */ + if (!ret.intval && + (di->chg_info.conn_chg & AC_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg &= ~AC_CHG; + } + /* AC connected */ + else if (ret.intval && + !(di->chg_info.conn_chg & AC_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg |= AC_CHG; + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB disconnected */ + if (!ret.intval && + (di->chg_info.conn_chg & USB_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg &= ~USB_CHG; + } + /* USB connected */ + else if (ret.intval && + !(di->chg_info.conn_chg & USB_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg |= USB_CHG; + } + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_ONLINE: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + break; + case POWER_SUPPLY_TYPE_MAINS: + /* AC offline */ + if (!ret.intval && + (di->chg_info.online_chg & AC_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg &= ~AC_CHG; + } + /* AC online */ + else if (ret.intval && + !(di->chg_info.online_chg & AC_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg |= AC_CHG; + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, 0); + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB offline */ + if (!ret.intval && + (di->chg_info.online_chg & USB_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg &= ~USB_CHG; + } + /* USB online */ + else if (ret.intval && + !(di->chg_info.online_chg & USB_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg |= USB_CHG; + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, 0); + } + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_HEALTH: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + break; + case POWER_SUPPLY_TYPE_MAINS: + switch (ret.intval) { + case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: + di->events.mainextchnotok = true; + di->events.main_thermal_prot = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_DEAD: + di->events.ac_wd_expired = true; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.main_thermal_prot = false; + break; + case POWER_SUPPLY_HEALTH_COLD: + case POWER_SUPPLY_HEALTH_OVERHEAT: + di->events.main_thermal_prot = true; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_OVERVOLTAGE: + di->events.main_ovv = true; + di->events.mainextchnotok = false; + di->events.main_thermal_prot = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_GOOD: + di->events.main_thermal_prot = false; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + default: + break; + } + break; + + case POWER_SUPPLY_TYPE_USB: + switch (ret.intval) { + case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: + di->events.usbchargernotok = true; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_DEAD: + di->events.usb_wd_expired = true; + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + break; + case POWER_SUPPLY_HEALTH_COLD: + case POWER_SUPPLY_HEALTH_OVERHEAT: + di->events.usb_thermal_prot = true; + di->events.usbchargernotok = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_OVERVOLTAGE: + di->events.vbus_ovv = true; + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_GOOD: + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + default: + break; + } + default: + break; + } + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.volt = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_MAINS: + di->chg_info.ac_volt = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + di->chg_info.usb_volt = ret.intval / 1000; + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + switch (ext->type) { + case POWER_SUPPLY_TYPE_MAINS: + /* AVG is used to indicate when we are + * in CV mode */ + if (ret.intval) + di->events.ac_cv_active = true; + else + di->events.ac_cv_active = false; + + break; + case POWER_SUPPLY_TYPE_USB: + /* AVG is used to indicate when we are + * in CV mode */ + if (ret.intval) + di->events.usb_cv_active = true; + else + di->events.usb_cv_active = false; + + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + if (ret.intval) + di->events.batt_unknown = false; + else + di->events.batt_unknown = true; + + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_TEMP: + di->batt_data.temp = ret.intval / 10; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_MAINS: + di->chg_info.ac_curr = + ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + di->chg_info.usb_curr = + ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.inst_curr = ret.intval / 1000; + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_CURRENT_AVG: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.avg_curr = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + if (ret.intval) + di->events.vbus_collapsed = true; + else + di->events.vbus_collapsed = false; + break; + default: + break; + } + break; + case POWER_SUPPLY_PROP_CAPACITY: + di->batt_data.percent = ret.intval; + break; + default: + break; + } + } + return 0; +} + +/** + * abx500_chargalg_external_power_changed() - callback for power supply changes + * @psy: pointer to the structure power_supply + * + * This function is the entry point of the pointer external_power_changed + * of the structure power_supply. + * This function gets executed when there is a change in any external power + * supply that this driver needs to be notified of. + */ +static void abx500_chargalg_external_power_changed(struct power_supply *psy) +{ + struct abx500_chargalg *di = to_abx500_chargalg_device_info(psy); + + /* + * Trigger execution of the algorithm instantly and read + * all power_supply properties there instead + */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_algorithm() - Main function for the algorithm + * @di: pointer to the abx500_chargalg structure + * + * This is the main control function for the charging algorithm. + * It is called periodically or when something happens that will + * trigger a state change + */ +static void abx500_chargalg_algorithm(struct abx500_chargalg *di) +{ + int charger_status; + + /* Collect data from all power_supply class devices */ + class_for_each_device(power_supply_class, NULL, + &di->chargalg_psy, abx500_chargalg_get_ext_psy_data); + + abx500_chargalg_end_of_charge(di); + abx500_chargalg_check_temp(di); + abx500_chargalg_check_charger_voltage(di); + + charger_status = abx500_chargalg_check_charger_connection(di); + /* + * First check if we have a charger connected. + * Also we don't allow charging of unknown batteries if configured + * this way + */ + if (!charger_status || + (di->events.batt_unknown && !di->bat->chg_unknown_bat)) { + if (di->charge_state != STATE_HANDHELD) { + di->events.safety_timer_expired = false; + abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); + } + } + + /* If suspended, we should not continue checking the flags */ + else if (di->charge_state == STATE_SUSPENDED_INIT || + di->charge_state == STATE_SUSPENDED) { + /* We don't do anything here, just don,t continue */ + } + + /* Safety timer expiration */ + else if (di->events.safety_timer_expired) { + if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED) + abx500_chargalg_state_to(di, + STATE_SAFETY_TIMER_EXPIRED_INIT); + } + /* + * Check if any interrupts has occured + * that will prevent us from charging + */ + + /* Battery removed */ + else if (di->events.batt_rem) { + if (di->charge_state != STATE_BATT_REMOVED) + abx500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT); + } + /* Main or USB charger not ok. */ + else if (di->events.mainextchnotok || di->events.usbchargernotok) { + /* + * If vbus_collapsed is set, we have to lower the charger + * current, which is done in the normal state below + */ + if (di->charge_state != STATE_CHG_NOT_OK && + !di->events.vbus_collapsed) + abx500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT); + } + /* VBUS, Main or VBAT OVV. */ + else if (di->events.vbus_ovv || + di->events.main_ovv || + di->events.batt_ovv || + !di->chg_info.usb_chg_ok || + !di->chg_info.ac_chg_ok) { + if (di->charge_state != STATE_OVV_PROTECT) + abx500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT); + } + /* USB Thermal, stop charging */ + else if (di->events.main_thermal_prot || + di->events.usb_thermal_prot) { + if (di->charge_state != STATE_HW_TEMP_PROTECT) + abx500_chargalg_state_to(di, + STATE_HW_TEMP_PROTECT_INIT); + } + /* Battery temp over/under */ + else if (di->events.btemp_underover) { + if (di->charge_state != STATE_TEMP_UNDEROVER) + abx500_chargalg_state_to(di, + STATE_TEMP_UNDEROVER_INIT); + } + /* Watchdog expired */ + else if (di->events.ac_wd_expired || + di->events.usb_wd_expired) { + if (di->charge_state != STATE_WD_EXPIRED) + abx500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT); + } + /* Battery temp high/low */ + else if (di->events.btemp_lowhigh) { + if (di->charge_state != STATE_TEMP_LOWHIGH) + abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT); + } + + dev_dbg(di->dev, + "[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d " + "State %s Active_chg %d Chg_status %d AC %d USB %d " + "AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d " + "USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n", + di->batt_data.volt, + di->batt_data.avg_curr, + di->batt_data.inst_curr, + di->batt_data.temp, + di->batt_data.percent, + di->maintenance_chg, + states[di->charge_state], + di->chg_info.charger_type, + di->charge_status, + di->chg_info.conn_chg & AC_CHG, + di->chg_info.conn_chg & USB_CHG, + di->chg_info.online_chg & AC_CHG, + di->chg_info.online_chg & USB_CHG, + di->events.ac_cv_active, + di->events.usb_cv_active, + di->chg_info.ac_curr, + di->chg_info.usb_curr, + di->chg_info.ac_vset, + di->chg_info.ac_iset, + di->chg_info.usb_vset, + di->chg_info.usb_iset); + + switch (di->charge_state) { + case STATE_HANDHELD_INIT: + abx500_chargalg_stop_charging(di); + di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING; + abx500_chargalg_state_to(di, STATE_HANDHELD); + /* Intentional fallthrough */ + + case STATE_HANDHELD: + break; + + case STATE_SUSPENDED_INIT: + if (di->susp_status.ac_suspended) + abx500_chargalg_ac_en(di, false, 0, 0); + if (di->susp_status.usb_suspended) + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + di->maintenance_chg = false; + abx500_chargalg_state_to(di, STATE_SUSPENDED); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough */ + + case STATE_SUSPENDED: + /* CHARGING is suspended */ + break; + + case STATE_BATT_REMOVED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_BATT_REMOVED); + /* Intentional fallthrough */ + + case STATE_BATT_REMOVED: + if (!di->events.batt_rem) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_HW_TEMP_PROTECT_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT); + /* Intentional fallthrough */ + + case STATE_HW_TEMP_PROTECT: + if (!di->events.main_thermal_prot && + !di->events.usb_thermal_prot) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_OVV_PROTECT_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_OVV_PROTECT); + /* Intentional fallthrough */ + + case STATE_OVV_PROTECT: + if (!di->events.vbus_ovv && + !di->events.main_ovv && + !di->events.batt_ovv && + di->chg_info.usb_chg_ok && + di->chg_info.ac_chg_ok) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_CHG_NOT_OK_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_CHG_NOT_OK); + /* Intentional fallthrough */ + + case STATE_CHG_NOT_OK: + if (!di->events.mainextchnotok && + !di->events.usbchargernotok) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_SAFETY_TIMER_EXPIRED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED); + /* Intentional fallthrough */ + + case STATE_SAFETY_TIMER_EXPIRED: + /* We exit this state when charger is removed */ + break; + + case STATE_NORMAL_INIT: + abx500_chargalg_start_charging(di, + di->bat->bat_type[di->bat->batt_id].normal_vol_lvl, + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + abx500_chargalg_state_to(di, STATE_NORMAL); + abx500_chargalg_start_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + init_maxim_chg_curr(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + di->eoc_cnt = 0; + di->maintenance_chg = false; + power_supply_changed(&di->chargalg_psy); + + break; + + case STATE_NORMAL: + handle_maxim_chg_curr(di); + if (di->charge_status == POWER_SUPPLY_STATUS_FULL && + di->maintenance_chg) { + if (di->bat->no_maintenance) + abx500_chargalg_state_to(di, + STATE_WAIT_FOR_RECHARGE_INIT); + else + abx500_chargalg_state_to(di, + STATE_MAINTENANCE_A_INIT); + } + break; + + /* This state will be used when the maintenance state is disabled */ + case STATE_WAIT_FOR_RECHARGE_INIT: + abx500_chargalg_hold_charging(di); + abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE); + di->rch_cnt = RCH_COND_CNT; + /* Intentional fallthrough */ + + case STATE_WAIT_FOR_RECHARGE: + if (di->batt_data.volt <= + di->bat->bat_type[di->bat->batt_id].recharge_vol) { + if (di->rch_cnt-- == 0) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } else + di->rch_cnt = RCH_COND_CNT; + break; + + case STATE_MAINTENANCE_A_INIT: + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_start_maintenance_timer(di, + di->bat->bat_type[ + di->bat->batt_id].maint_a_chg_timer_h); + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].maint_a_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].maint_a_cur_lvl); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_A); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough*/ + + case STATE_MAINTENANCE_A: + if (di->events.maintenance_timer_expired) { + abx500_chargalg_stop_maintenance_timer(di); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT); + } + break; + + case STATE_MAINTENANCE_B_INIT: + abx500_chargalg_start_maintenance_timer(di, + di->bat->bat_type[ + di->bat->batt_id].maint_b_chg_timer_h); + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].maint_b_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].maint_b_cur_lvl); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_B); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough*/ + + case STATE_MAINTENANCE_B: + if (di->events.maintenance_timer_expired) { + abx500_chargalg_stop_maintenance_timer(di); + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } + break; + + case STATE_TEMP_LOWHIGH_INIT: + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].low_high_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].low_high_cur_lvl); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough */ + + case STATE_TEMP_LOWHIGH: + if (!di->events.btemp_lowhigh) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_WD_EXPIRED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_WD_EXPIRED); + /* Intentional fallthrough */ + + case STATE_WD_EXPIRED: + if (!di->events.ac_wd_expired && + !di->events.usb_wd_expired) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_TEMP_UNDEROVER_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_TEMP_UNDEROVER); + /* Intentional fallthrough */ + + case STATE_TEMP_UNDEROVER: + if (!di->events.btemp_underover) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + } + + /* Start charging directly if the new state is a charge state */ + if (di->charge_state == STATE_NORMAL_INIT || + di->charge_state == STATE_MAINTENANCE_A_INIT || + di->charge_state == STATE_MAINTENANCE_B_INIT) + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_periodic_work() - Periodic work for the algorithm + * @work: pointer to the work_struct structure + * + * Work queue function for the charging algorithm + */ +static void abx500_chargalg_periodic_work(struct work_struct *work) +{ + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_periodic_work.work); + + abx500_chargalg_algorithm(di); + + /* + * If a charger is connected then the battery has to be monitored + * frequently, else the work can be delayed. + */ + if (di->chg_info.conn_chg) + queue_delayed_work(di->chargalg_wq, + &di->chargalg_periodic_work, + di->bat->interval_charging * HZ); + else + queue_delayed_work(di->chargalg_wq, + &di->chargalg_periodic_work, + di->bat->interval_not_charging * HZ); +} + +/** + * abx500_chargalg_wd_work() - periodic work to kick the charger watchdog + * @work: pointer to the work_struct structure + * + * Work queue function for kicking the charger watchdog + */ +static void abx500_chargalg_wd_work(struct work_struct *work) +{ + int ret; + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_wd_work.work); + + dev_dbg(di->dev, "abx500_chargalg_wd_work\n"); + + ret = abx500_chargalg_kick_watchdog(di); + if (ret < 0) + dev_err(di->dev, "failed to kick watchdog\n"); + + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, CHG_WD_INTERVAL); +} + +/** + * abx500_chargalg_work() - Work to run the charging algorithm instantly + * @work: pointer to the work_struct structure + * + * Work queue function for calling the charging algorithm + */ +static void abx500_chargalg_work(struct work_struct *work) +{ + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_work); + + abx500_chargalg_algorithm(di); +} + +/** + * abx500_chargalg_get_property() - get the chargalg properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the + * chargalg properties by reading the sysfs files. + * status: charging/discharging/full/unknown + * health: health of the battery + * Returns error code in case of failure else 0 on success + */ +static int abx500_chargalg_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct abx500_chargalg *di; + + di = to_abx500_chargalg_device_info(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = di->charge_status; + break; + case POWER_SUPPLY_PROP_HEALTH: + if (di->events.batt_ovv) { + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + } else if (di->events.btemp_underover) { + if (di->batt_data.temp <= di->bat->temp_under) + val->intval = POWER_SUPPLY_HEALTH_COLD; + else + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + } else { + val->intval = POWER_SUPPLY_HEALTH_GOOD; + } + break; + default: + return -EINVAL; + } + return 0; +} + +/* Exposure to the sysfs interface */ + +/** + * abx500_chargalg_sysfs_charger() - sysfs store operations + * @kobj: pointer to the struct kobject + * @attr: pointer to the struct attribute + * @buf: buffer that holds the parameter passed from userspace + * @length: length of the parameter passed + * + * Returns length of the buffer(input taken from user space) on success + * else error code on failure + * The operation to be performed on passing the parameters from the user space. + */ +static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj, + struct attribute *attr, const char *buf, size_t length) +{ + struct abx500_chargalg *di = container_of(kobj, + struct abx500_chargalg, chargalg_kobject); + long int param; + int ac_usb; + int ret; + char entry = *attr->name; + + switch (entry) { + case 'c': + ret = strict_strtol(buf, 10, ¶m); + if (ret < 0) + return ret; + + ac_usb = param; + switch (ac_usb) { + case 0: + /* Disable charging */ + di->susp_status.ac_suspended = true; + di->susp_status.usb_suspended = true; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + case 1: + /* Enable AC Charging */ + di->susp_status.ac_suspended = false; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + case 2: + /* Enable USB charging */ + di->susp_status.usb_suspended = false; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + default: + dev_info(di->dev, "Wrong input\n" + "Enter 0. Disable AC/USB Charging\n" + "1. Enable AC charging\n" + "2. Enable USB Charging\n"); + }; + break; + }; + return strlen(buf); +} + +static struct attribute abx500_chargalg_en_charger = \ +{ + .name = "chargalg", + .mode = S_IWUGO, +}; + +static struct attribute *abx500_chargalg_chg[] = { + &abx500_chargalg_en_charger, + NULL +}; + +static const struct sysfs_ops abx500_chargalg_sysfs_ops = { + .store = abx500_chargalg_sysfs_charger, +}; + +static struct kobj_type abx500_chargalg_ktype = { + .sysfs_ops = &abx500_chargalg_sysfs_ops, + .default_attrs = abx500_chargalg_chg, +}; + +/** + * abx500_chargalg_sysfs_exit() - de-init of sysfs entry + * @di: pointer to the struct abx500_chargalg + * + * This function removes the entry in sysfs. + */ +static void abx500_chargalg_sysfs_exit(struct abx500_chargalg *di) +{ + kobject_del(&di->chargalg_kobject); +} + +/** + * abx500_chargalg_sysfs_init() - init of sysfs entry + * @di: pointer to the struct abx500_chargalg + * + * This function adds an entry in sysfs. + * Returns error code in case of failure else 0(on success) + */ +static int abx500_chargalg_sysfs_init(struct abx500_chargalg *di) +{ + int ret = 0; + + ret = kobject_init_and_add(&di->chargalg_kobject, + &abx500_chargalg_ktype, + NULL, "abx500_chargalg"); + if (ret < 0) + dev_err(di->dev, "failed to create sysfs entry\n"); + + return ret; +} +/* Exposure to the sysfs interface <<END>> */ + +#if defined(CONFIG_PM) +static int abx500_chargalg_resume(struct platform_device *pdev) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + /* Kick charger watchdog if charging (any charger online) */ + if (di->chg_info.online_chg) + queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0); + + /* + * Run the charging algorithm directly to be sure we don't + * do it too seldom + */ + queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); + + return 0; +} + +static int abx500_chargalg_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + if (di->chg_info.online_chg) + cancel_delayed_work_sync(&di->chargalg_wd_work); + + cancel_delayed_work_sync(&di->chargalg_periodic_work); + + return 0; +} +#else +#define abx500_chargalg_suspend NULL +#define abx500_chargalg_resume NULL +#endif + +static int __devexit abx500_chargalg_remove(struct platform_device *pdev) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + /* sysfs interface to enable/disbale charging from user space */ + abx500_chargalg_sysfs_exit(di); + + /* Delete the work queue */ + destroy_workqueue(di->chargalg_wq); + + flush_scheduled_work(); + power_supply_unregister(&di->chargalg_psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + + return 0; +} + +static int __devinit abx500_chargalg_probe(struct platform_device *pdev) +{ + struct abx500_bm_plat_data *plat_data; + int ret = 0; + + struct abx500_chargalg *di = + kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL); + if (!di) + return -ENOMEM; + + /* get device struct */ + di->dev = &pdev->dev; + + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->chargalg; + di->bat = plat_data->battery; + + /* chargalg supply */ + di->chargalg_psy.name = "abx500_chargalg"; + di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY; + di->chargalg_psy.properties = abx500_chargalg_props; + di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props); + di->chargalg_psy.get_property = abx500_chargalg_get_property; + di->chargalg_psy.supplied_to = di->pdata->supplied_to; + di->chargalg_psy.num_supplicants = di->pdata->num_supplicants; + di->chargalg_psy.external_power_changed = + abx500_chargalg_external_power_changed; + + /* Initilialize safety timer */ + init_timer(&di->safety_timer); + di->safety_timer.function = abx500_chargalg_safety_timer_expired; + di->safety_timer.data = (unsigned long) di; + + /* Initilialize maintenance timer */ + init_timer(&di->maintenance_timer); + di->maintenance_timer.function = + abx500_chargalg_maintenance_timer_expired; + di->maintenance_timer.data = (unsigned long) di; + + /* Create a work queue for the chargalg */ + di->chargalg_wq = + create_singlethread_workqueue("abx500_chargalg_wq"); + if (di->chargalg_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for chargalg */ + INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_periodic_work, + abx500_chargalg_periodic_work); + INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_wd_work, + abx500_chargalg_wd_work); + + /* Init work for chargalg */ + INIT_WORK(&di->chargalg_work, abx500_chargalg_work); + + /* To detect charger at startup */ + di->chg_info.prev_conn_chg = -1; + + /* Register chargalg power supply class */ + ret = power_supply_register(di->dev, &di->chargalg_psy); + if (ret) { + dev_err(di->dev, "failed to register chargalg psy\n"); + goto free_chargalg_wq; + } + + platform_set_drvdata(pdev, di); + + /* sysfs interface to enable/disable charging from user space */ + ret = abx500_chargalg_sysfs_init(di); + if (ret) { + dev_err(di->dev, "failed to create sysfs entry\n"); + goto free_psy; + } + + /* Run the charging algorithm */ + queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); + + dev_info(di->dev, "probe success\n"); + return ret; + +free_psy: + power_supply_unregister(&di->chargalg_psy); +free_chargalg_wq: + destroy_workqueue(di->chargalg_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver abx500_chargalg_driver = { + .probe = abx500_chargalg_probe, + .remove = __devexit_p(abx500_chargalg_remove), + .suspend = abx500_chargalg_suspend, + .resume = abx500_chargalg_resume, + .driver = { + .name = "abx500-chargalg", + .owner = THIS_MODULE, + }, +}; + +static int __init abx500_chargalg_init(void) +{ + return platform_driver_register(&abx500_chargalg_driver); +} + +static void __exit abx500_chargalg_exit(void) +{ + platform_driver_unregister(&abx500_chargalg_driver); +} + +module_init(abx500_chargalg_init); +module_exit(abx500_chargalg_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski"); +MODULE_ALIAS("platform:abx500-chargalg"); +MODULE_DESCRIPTION("abx500 battery charging algorithm"); diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c index 88fd9710bda2..9eca9f1ff0ea 100644 --- a/drivers/power/charger-manager.c +++ b/drivers/power/charger-manager.c @@ -134,12 +134,11 @@ static int get_batt_uV(struct charger_manager *cm, int *uV) union power_supply_propval val; int ret; - if (cm->fuel_gauge) - ret = cm->fuel_gauge->get_property(cm->fuel_gauge, - POWER_SUPPLY_PROP_VOLTAGE_NOW, &val); - else + if (!cm->fuel_gauge) return -ENODEV; + ret = cm->fuel_gauge->get_property(cm->fuel_gauge, + POWER_SUPPLY_PROP_VOLTAGE_NOW, &val); if (ret) return ret; @@ -245,9 +244,7 @@ static int try_charger_enable(struct charger_manager *cm, bool enable) struct charger_desc *desc = cm->desc; /* Ignore if it's redundent command */ - if (enable && cm->charger_enabled) - return 0; - if (!enable && !cm->charger_enabled) + if (enable == cm->charger_enabled) return 0; if (enable) { @@ -309,9 +306,7 @@ static void uevent_notify(struct charger_manager *cm, const char *event) if (!strncmp(env_str_save, event, UEVENT_BUF_SIZE)) return; /* Duplicated. */ - else - strncpy(env_str_save, event, UEVENT_BUF_SIZE); - + strncpy(env_str_save, event, UEVENT_BUF_SIZE); return; } @@ -387,8 +382,10 @@ static bool cm_monitor(void) mutex_lock(&cm_list_mtx); - list_for_each_entry(cm, &cm_list, entry) - stop = stop || _cm_monitor(cm); + list_for_each_entry(cm, &cm_list, entry) { + if (_cm_monitor(cm)) + stop = true; + } mutex_unlock(&cm_list_mtx); @@ -402,7 +399,8 @@ static int charger_get_property(struct power_supply *psy, struct charger_manager *cm = container_of(psy, struct charger_manager, charger_psy); struct charger_desc *desc = cm->desc; - int i, ret = 0, uV; + int ret = 0; + int uV; switch (psp) { case POWER_SUPPLY_PROP_STATUS: @@ -428,8 +426,7 @@ static int charger_get_property(struct power_supply *psy, val->intval = 0; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: - ret = get_batt_uV(cm, &i); - val->intval = i; + ret = get_batt_uV(cm, &val->intval); break; case POWER_SUPPLY_PROP_CURRENT_NOW: ret = cm->fuel_gauge->get_property(cm->fuel_gauge, @@ -697,8 +694,10 @@ bool cm_suspend_again(void) mutex_lock(&cm_list_mtx); list_for_each_entry(cm, &cm_list, entry) { if (cm->status_save_ext_pwr_inserted != is_ext_pwr_online(cm) || - cm->status_save_batt != is_batt_present(cm)) + cm->status_save_batt != is_batt_present(cm)) { ret = false; + break; + } } mutex_unlock(&cm_list_mtx); @@ -855,11 +854,10 @@ static int charger_manager_probe(struct platform_device *pdev) platform_set_drvdata(pdev, cm); - memcpy(&cm->charger_psy, &psy_default, - sizeof(psy_default)); + memcpy(&cm->charger_psy, &psy_default, sizeof(psy_default)); + if (!desc->psy_name) { - strncpy(cm->psy_name_buf, psy_default.name, - PSY_NAME_MAX); + strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX); } else { strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX); } @@ -894,15 +892,15 @@ static int charger_manager_probe(struct platform_device *pdev) POWER_SUPPLY_PROP_CURRENT_NOW; cm->charger_psy.num_properties++; } - if (!desc->measure_battery_temp) { - cm->charger_psy.properties[cm->charger_psy.num_properties] = - POWER_SUPPLY_PROP_TEMP_AMBIENT; - cm->charger_psy.num_properties++; - } + if (desc->measure_battery_temp) { cm->charger_psy.properties[cm->charger_psy.num_properties] = POWER_SUPPLY_PROP_TEMP; cm->charger_psy.num_properties++; + } else { + cm->charger_psy.properties[cm->charger_psy.num_properties] = + POWER_SUPPLY_PROP_TEMP_AMBIENT; + cm->charger_psy.num_properties++; } ret = power_supply_register(NULL, &cm->charger_psy); @@ -933,9 +931,8 @@ static int charger_manager_probe(struct platform_device *pdev) return 0; err_chg_enable: - if (desc->charger_regulators) - regulator_bulk_free(desc->num_charger_regulators, - desc->charger_regulators); + regulator_bulk_free(desc->num_charger_regulators, + desc->charger_regulators); err_bulk_get: power_supply_unregister(&cm->charger_psy); err_register: @@ -961,10 +958,8 @@ static int __devexit charger_manager_remove(struct platform_device *pdev) list_del(&cm->entry); mutex_unlock(&cm_list_mtx); - if (desc->charger_regulators) - regulator_bulk_free(desc->num_charger_regulators, - desc->charger_regulators); - + regulator_bulk_free(desc->num_charger_regulators, + desc->charger_regulators); power_supply_unregister(&cm->charger_psy); kfree(cm->charger_psy.properties); kfree(cm->charger_stat); @@ -982,9 +977,7 @@ MODULE_DEVICE_TABLE(platform, charger_manager_id); static int cm_suspend_prepare(struct device *dev) { - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct charger_manager *cm = platform_get_drvdata(pdev); + struct charger_manager *cm = dev_get_drvdata(dev); if (!cm_suspended) { if (rtc_dev) { @@ -1020,9 +1013,7 @@ static int cm_suspend_prepare(struct device *dev) static void cm_suspend_complete(struct device *dev) { - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct charger_manager *cm = platform_get_drvdata(pdev); + struct charger_manager *cm = dev_get_drvdata(dev); if (cm_suspended) { if (rtc_dev) { diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c index e8ea47a53dee..a5f6a0ec1572 100644 --- a/drivers/power/da9052-battery.c +++ b/drivers/power/da9052-battery.c @@ -612,6 +612,7 @@ static s32 __devinit da9052_bat_probe(struct platform_device *pdev) if (ret) goto err; + platform_set_drvdata(pdev, bat); return 0; err: @@ -633,6 +634,7 @@ static int __devexit da9052_bat_remove(struct platform_device *pdev) free_irq(bat->da9052->irq_base + irq, bat); } power_supply_unregister(&bat->psy); + kfree(bat); return 0; } @@ -645,18 +647,7 @@ static struct platform_driver da9052_bat_driver = { .owner = THIS_MODULE, }, }; - -static int __init da9052_bat_init(void) -{ - return platform_driver_register(&da9052_bat_driver); -} -module_init(da9052_bat_init); - -static void __exit da9052_bat_exit(void) -{ - platform_driver_unregister(&da9052_bat_driver); -} -module_exit(da9052_bat_exit); +module_platform_driver(da9052_bat_driver); MODULE_DESCRIPTION("DA9052 BAT Device Driver"); MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c index bfbce5de49da..6bb6e2f5ea81 100644 --- a/drivers/power/ds2782_battery.c +++ b/drivers/power/ds2782_battery.c @@ -403,18 +403,7 @@ static struct i2c_driver ds278x_battery_driver = { .remove = ds278x_battery_remove, .id_table = ds278x_id, }; - -static int __init ds278x_init(void) -{ - return i2c_add_driver(&ds278x_battery_driver); -} -module_init(ds278x_init); - -static void __exit ds278x_exit(void) -{ - i2c_del_driver(&ds278x_battery_driver); -} -module_exit(ds278x_exit); +module_i2c_driver(ds278x_battery_driver); MODULE_AUTHOR("Ryan Mallon"); MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 1289a5f790a1..39eb50f35f09 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -480,6 +480,7 @@ fail0: dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret); + isp1704_charger_set_power(isp, 0); return ret; } diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c index c53dd1292f81..d8b75780bfef 100644 --- a/drivers/power/lp8727_charger.c +++ b/drivers/power/lp8727_charger.c @@ -1,6 +1,7 @@ /* - * Driver for LP8727 Micro/Mini USB IC with intergrated charger + * Driver for LP8727 Micro/Mini USB IC with integrated charger * + * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor * * This program is free software; you can redistribute it and/or modify @@ -25,7 +26,7 @@ #define INT1 0x4 #define INT2 0x5 #define STATUS1 0x6 -#define STATUS2 0x7 +#define STATUS2 0x7 #define CHGCTRL2 0x9 /* CTRL1 register */ @@ -91,7 +92,7 @@ struct lp8727_chg { enum lp8727_dev_id devid; }; -static int lp8727_i2c_read(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) +static int lp8727_read_bytes(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) { s32 ret; @@ -102,29 +103,22 @@ static int lp8727_i2c_read(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) return (ret != len) ? -EIO : 0; } -static int lp8727_i2c_write(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) +static inline int lp8727_read_byte(struct lp8727_chg *pchg, u8 reg, u8 *data) { - s32 ret; + return lp8727_read_bytes(pchg, reg, data, 1); +} + +static int lp8727_write_byte(struct lp8727_chg *pchg, u8 reg, u8 data) +{ + int ret; mutex_lock(&pchg->xfer_lock); - ret = i2c_smbus_write_i2c_block_data(pchg->client, reg, len, data); + ret = i2c_smbus_write_byte_data(pchg->client, reg, data); mutex_unlock(&pchg->xfer_lock); return ret; } -static inline int lp8727_i2c_read_byte(struct lp8727_chg *pchg, u8 reg, - u8 *data) -{ - return lp8727_i2c_read(pchg, reg, data, 1); -} - -static inline int lp8727_i2c_write_byte(struct lp8727_chg *pchg, u8 reg, - u8 *data) -{ - return lp8727_i2c_write(pchg, reg, data, 1); -} - static int lp8727_is_charger_attached(const char *name, int id) { if (name) { @@ -137,37 +131,41 @@ static int lp8727_is_charger_attached(const char *name, int id) return (id >= ID_TA && id <= ID_USB_CHG) ? 1 : 0; } -static void lp8727_init_device(struct lp8727_chg *pchg) +static int lp8727_init_device(struct lp8727_chg *pchg) { u8 val; + int ret; val = ID200_EN | ADC_EN | CP_EN; - if (lp8727_i2c_write_byte(pchg, CTRL1, &val)) - dev_err(pchg->dev, "i2c write err : addr=0x%.2x\n", CTRL1); + ret = lp8727_write_byte(pchg, CTRL1, val); + if (ret) + return ret; val = INT_EN | CHGDET_EN; - if (lp8727_i2c_write_byte(pchg, CTRL2, &val)) - dev_err(pchg->dev, "i2c write err : addr=0x%.2x\n", CTRL2); + ret = lp8727_write_byte(pchg, CTRL2, val); + if (ret) + return ret; + + return 0; } static int lp8727_is_dedicated_charger(struct lp8727_chg *pchg) { u8 val; - lp8727_i2c_read_byte(pchg, STATUS1, &val); - return (val & DCPORT); + lp8727_read_byte(pchg, STATUS1, &val); + return val & DCPORT; } static int lp8727_is_usb_charger(struct lp8727_chg *pchg) { u8 val; - lp8727_i2c_read_byte(pchg, STATUS1, &val); - return (val & CHPORT); + lp8727_read_byte(pchg, STATUS1, &val); + return val & CHPORT; } static void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw) { - u8 val = sw; - lp8727_i2c_write_byte(pchg, SWCTRL, &val); + lp8727_write_byte(pchg, SWCTRL, sw); } static void lp8727_id_detection(struct lp8727_chg *pchg, u8 id, int vbusin) @@ -207,9 +205,9 @@ static void lp8727_enable_chgdet(struct lp8727_chg *pchg) { u8 val; - lp8727_i2c_read_byte(pchg, CTRL2, &val); + lp8727_read_byte(pchg, CTRL2, &val); val |= CHGDET_EN; - lp8727_i2c_write_byte(pchg, CTRL2, &val); + lp8727_write_byte(pchg, CTRL2, val); } static void lp8727_delayed_func(struct work_struct *_work) @@ -218,7 +216,7 @@ static void lp8727_delayed_func(struct work_struct *_work) struct lp8727_chg *pchg = container_of(_work, struct lp8727_chg, work.work); - if (lp8727_i2c_read(pchg, INT1, intstat, 2)) { + if (lp8727_read_bytes(pchg, INT1, intstat, 2)) { dev_err(pchg->dev, "can not read INT registers\n"); return; } @@ -244,20 +242,22 @@ static irqreturn_t lp8727_isr_func(int irq, void *ptr) return IRQ_HANDLED; } -static void lp8727_intr_config(struct lp8727_chg *pchg) +static int lp8727_intr_config(struct lp8727_chg *pchg) { INIT_DELAYED_WORK(&pchg->work, lp8727_delayed_func); pchg->irqthread = create_singlethread_workqueue("lp8727-irqthd"); - if (!pchg->irqthread) + if (!pchg->irqthread) { dev_err(pchg->dev, "can not create thread for lp8727\n"); - - if (request_threaded_irq(pchg->client->irq, - NULL, - lp8727_isr_func, - IRQF_TRIGGER_FALLING, "lp8727_irq", pchg)) { - dev_err(pchg->dev, "lp8727 irq can not be registered\n"); + return -ENOMEM; } + + return request_threaded_irq(pchg->client->irq, + NULL, + lp8727_isr_func, + IRQF_TRIGGER_FALLING, + "lp8727_irq", + pchg); } static enum power_supply_property lp8727_charger_prop[] = { @@ -300,7 +300,7 @@ static int lp8727_battery_get_property(struct power_supply *psy, switch (psp) { case POWER_SUPPLY_PROP_STATUS: if (lp8727_is_charger_attached(psy->name, pchg->devid)) { - lp8727_i2c_read_byte(pchg, STATUS1, &read); + lp8727_read_byte(pchg, STATUS1, &read); if (((read & CHGSTAT) >> 4) == EOC) val->intval = POWER_SUPPLY_STATUS_FULL; else @@ -310,7 +310,7 @@ static int lp8727_battery_get_property(struct power_supply *psy, } break; case POWER_SUPPLY_PROP_HEALTH: - lp8727_i2c_read_byte(pchg, STATUS2, &read); + lp8727_read_byte(pchg, STATUS2, &read); read = (read & TEMP_STAT) >> 5; if (read >= 0x1 && read <= 0x3) val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; @@ -351,7 +351,7 @@ static void lp8727_charger_changed(struct power_supply *psy) eoc_level = pchg->chg_parm->eoc_level; ichg = pchg->chg_parm->ichg; val = (ichg << 4) | eoc_level; - lp8727_i2c_write_byte(pchg, CHGCTRL2, &val); + lp8727_write_byte(pchg, CHGCTRL2, val); } } } @@ -439,15 +439,29 @@ static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id) mutex_init(&pchg->xfer_lock); - lp8727_init_device(pchg); - lp8727_intr_config(pchg); + ret = lp8727_init_device(pchg); + if (ret) { + dev_err(pchg->dev, "i2c communication err: %d", ret); + goto error; + } + + ret = lp8727_intr_config(pchg); + if (ret) { + dev_err(pchg->dev, "irq handler err: %d", ret); + goto error; + } ret = lp8727_register_psy(pchg); - if (ret) - dev_err(pchg->dev, - "can not register power supplies. err=%d", ret); + if (ret) { + dev_err(pchg->dev, "power supplies register err: %d", ret); + goto error; + } return 0; + +error: + kfree(pchg); + return ret; } static int __devexit lp8727_remove(struct i2c_client *cl) @@ -466,6 +480,7 @@ static const struct i2c_device_id lp8727_ids[] = { {"lp8727", 0}, { } }; +MODULE_DEVICE_TABLE(i2c, lp8727_ids); static struct i2c_driver lp8727_driver = { .driver = { @@ -475,21 +490,9 @@ static struct i2c_driver lp8727_driver = { .remove = __devexit_p(lp8727_remove), .id_table = lp8727_ids, }; +module_i2c_driver(lp8727_driver); -static int __init lp8727_init(void) -{ - return i2c_add_driver(&lp8727_driver); -} - -static void __exit lp8727_exit(void) -{ - i2c_del_driver(&lp8727_driver); -} - -module_init(lp8727_init); -module_exit(lp8727_exit); - -MODULE_DESCRIPTION("National Semiconductor LP8727 charger driver"); -MODULE_AUTHOR - ("Woogyom Kim <milo.kim@ti.com>, Daniel Jeong <daniel.jeong@ti.com>"); +MODULE_DESCRIPTION("TI/National Semiconductor LP8727 charger driver"); +MODULE_AUTHOR("Woogyom Kim <milo.kim@ti.com>, " + "Daniel Jeong <daniel.jeong@ti.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c index 2f2f9a6f54fa..c284143cfcd7 100644 --- a/drivers/power/max17040_battery.c +++ b/drivers/power/max17040_battery.c @@ -290,18 +290,7 @@ static struct i2c_driver max17040_i2c_driver = { .resume = max17040_resume, .id_table = max17040_id, }; - -static int __init max17040_init(void) -{ - return i2c_add_driver(&max17040_i2c_driver); -} -module_init(max17040_init); - -static void __exit max17040_exit(void) -{ - i2c_del_driver(&max17040_i2c_driver); -} -module_exit(max17040_exit); +module_i2c_driver(max17040_i2c_driver); MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>"); MODULE_DESCRIPTION("MAX17040 Fuel Gauge"); diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c index 86acee2f9889..04620c2cb388 100644 --- a/drivers/power/max17042_battery.c +++ b/drivers/power/max17042_battery.c @@ -26,14 +26,47 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/interrupt.h> #include <linux/mod_devicetable.h> #include <linux/power_supply.h> #include <linux/power/max17042_battery.h> +#include <linux/of.h> + +/* Status register bits */ +#define STATUS_POR_BIT (1 << 1) +#define STATUS_BST_BIT (1 << 3) +#define STATUS_VMN_BIT (1 << 8) +#define STATUS_TMN_BIT (1 << 9) +#define STATUS_SMN_BIT (1 << 10) +#define STATUS_BI_BIT (1 << 11) +#define STATUS_VMX_BIT (1 << 12) +#define STATUS_TMX_BIT (1 << 13) +#define STATUS_SMX_BIT (1 << 14) +#define STATUS_BR_BIT (1 << 15) + +/* Interrupt mask bits */ +#define CONFIG_ALRT_BIT_ENBL (1 << 2) +#define STATUS_INTR_SOCMIN_BIT (1 << 10) +#define STATUS_INTR_SOCMAX_BIT (1 << 14) + +#define VFSOC0_LOCK 0x0000 +#define VFSOC0_UNLOCK 0x0080 +#define MODEL_UNLOCK1 0X0059 +#define MODEL_UNLOCK2 0X00C4 +#define MODEL_LOCK1 0X0000 +#define MODEL_LOCK2 0X0000 + +#define dQ_ACC_DIV 0x4 +#define dP_ACC_100 0x1900 +#define dP_ACC_200 0x3200 struct max17042_chip { struct i2c_client *client; struct power_supply battery; struct max17042_platform_data *pdata; + struct work_struct work; + int init_complete; }; static int max17042_write_reg(struct i2c_client *client, u8 reg, u16 value) @@ -87,6 +120,9 @@ static int max17042_get_property(struct power_supply *psy, struct max17042_chip, battery); int ret; + if (!chip->init_complete) + return -EAGAIN; + switch (psp) { case POWER_SUPPLY_PROP_PRESENT: ret = max17042_read_reg(chip->client, MAX17042_STATUS); @@ -136,21 +172,18 @@ static int max17042_get_property(struct power_supply *psy, val->intval = ret * 625 / 8; break; case POWER_SUPPLY_PROP_CAPACITY: - ret = max17042_read_reg(chip->client, MAX17042_SOC); + ret = max17042_read_reg(chip->client, MAX17042_RepSOC); if (ret < 0) return ret; val->intval = ret >> 8; break; case POWER_SUPPLY_PROP_CHARGE_FULL: - ret = max17042_read_reg(chip->client, MAX17042_RepSOC); + ret = max17042_read_reg(chip->client, MAX17042_FullCAP); if (ret < 0) return ret; - if ((ret >> 8) >= MAX17042_BATTERY_FULL) - val->intval = 1; - else if (ret >= 0) - val->intval = 0; + val->intval = ret * 1000 / 2; break; case POWER_SUPPLY_PROP_TEMP: ret = max17042_read_reg(chip->client, MAX17042_TEMP); @@ -210,22 +243,419 @@ static int max17042_get_property(struct power_supply *psy, return 0; } +static int max17042_write_verify_reg(struct i2c_client *client, + u8 reg, u16 value) +{ + int retries = 8; + int ret; + u16 read_value; + + do { + ret = i2c_smbus_write_word_data(client, reg, value); + read_value = max17042_read_reg(client, reg); + if (read_value != value) { + ret = -EIO; + retries--; + } + } while (retries && read_value != value); + + if (ret < 0) + dev_err(&client->dev, "%s: err %d\n", __func__, ret); + + return ret; +} + +static inline void max17042_override_por( + struct i2c_client *client, u8 reg, u16 value) +{ + if (value) + max17042_write_reg(client, reg, value); +} + +static inline void max10742_unlock_model(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + max17042_write_reg(client, MAX17042_MLOCKReg1, MODEL_UNLOCK1); + max17042_write_reg(client, MAX17042_MLOCKReg2, MODEL_UNLOCK2); +} + +static inline void max10742_lock_model(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + max17042_write_reg(client, MAX17042_MLOCKReg1, MODEL_LOCK1); + max17042_write_reg(client, MAX17042_MLOCKReg2, MODEL_LOCK2); +} + +static inline void max17042_write_model_data(struct max17042_chip *chip, + u8 addr, int size) +{ + struct i2c_client *client = chip->client; + int i; + for (i = 0; i < size; i++) + max17042_write_reg(client, addr + i, + chip->pdata->config_data->cell_char_tbl[i]); +} + +static inline void max17042_read_model_data(struct max17042_chip *chip, + u8 addr, u16 *data, int size) +{ + struct i2c_client *client = chip->client; + int i; + + for (i = 0; i < size; i++) + data[i] = max17042_read_reg(client, addr + i); +} + +static inline int max17042_model_data_compare(struct max17042_chip *chip, + u16 *data1, u16 *data2, int size) +{ + int i; + + if (memcmp(data1, data2, size)) { + dev_err(&chip->client->dev, "%s compare failed\n", __func__); + for (i = 0; i < size; i++) + dev_info(&chip->client->dev, "0x%x, 0x%x", + data1[i], data2[i]); + dev_info(&chip->client->dev, "\n"); + return -EINVAL; + } + return 0; +} + +static int max17042_init_model(struct max17042_chip *chip) +{ + int ret; + int table_size = + sizeof(chip->pdata->config_data->cell_char_tbl)/sizeof(u16); + u16 *temp_data; + + temp_data = kzalloc(table_size, GFP_KERNEL); + if (!temp_data) + return -ENOMEM; + + max10742_unlock_model(chip); + max17042_write_model_data(chip, MAX17042_MODELChrTbl, + table_size); + max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data, + table_size); + + ret = max17042_model_data_compare( + chip, + chip->pdata->config_data->cell_char_tbl, + temp_data, + table_size); + + max10742_lock_model(chip); + kfree(temp_data); + + return ret; +} + +static int max17042_verify_model_lock(struct max17042_chip *chip) +{ + int i; + int table_size = + sizeof(chip->pdata->config_data->cell_char_tbl); + u16 *temp_data; + int ret = 0; + + temp_data = kzalloc(table_size, GFP_KERNEL); + if (!temp_data) + return -ENOMEM; + + max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data, + table_size); + for (i = 0; i < table_size; i++) + if (temp_data[i]) + ret = -EINVAL; + + kfree(temp_data); + return ret; +} + +static void max17042_write_config_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_reg(chip->client, MAX17042_CONFIG, config->config); + max17042_write_reg(chip->client, MAX17042_LearnCFG, config->learn_cfg); + max17042_write_reg(chip->client, MAX17042_FilterCFG, + config->filter_cfg); + max17042_write_reg(chip->client, MAX17042_RelaxCFG, config->relax_cfg); +} + +static void max17042_write_custom_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_verify_reg(chip->client, MAX17042_RCOMP0, + config->rcomp0); + max17042_write_verify_reg(chip->client, MAX17042_TempCo, + config->tcompc0); + max17042_write_reg(chip->client, MAX17042_EmptyTempCo, + config->empty_tempco); + max17042_write_verify_reg(chip->client, MAX17042_K_empty0, + config->kempty0); + max17042_write_verify_reg(chip->client, MAX17042_ICHGTerm, + config->ichgt_term); +} + +static void max17042_update_capacity_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_verify_reg(chip->client, MAX17042_FullCAP, + config->fullcap); + max17042_write_reg(chip->client, MAX17042_DesignCap, + config->design_cap); + max17042_write_verify_reg(chip->client, MAX17042_FullCAPNom, + config->fullcapnom); +} + +static void max17042_reset_vfsoc0_reg(struct max17042_chip *chip) +{ + u16 vfSoc; + + vfSoc = max17042_read_reg(chip->client, MAX17042_VFSOC); + max17042_write_reg(chip->client, MAX17042_VFSOC0Enable, VFSOC0_UNLOCK); + max17042_write_verify_reg(chip->client, MAX17042_VFSOC0, vfSoc); + max17042_write_reg(chip->client, MAX17042_VFSOC0Enable, VFSOC0_LOCK); +} + +static void max17042_load_new_capacity_params(struct max17042_chip *chip) +{ + u16 full_cap0, rep_cap, dq_acc, vfSoc; + u32 rem_cap; + + struct max17042_config_data *config = chip->pdata->config_data; + + full_cap0 = max17042_read_reg(chip->client, MAX17042_FullCAP0); + vfSoc = max17042_read_reg(chip->client, MAX17042_VFSOC); + + /* fg_vfSoc needs to shifted by 8 bits to get the + * perc in 1% accuracy, to get the right rem_cap multiply + * full_cap0, fg_vfSoc and devide by 100 + */ + rem_cap = ((vfSoc >> 8) * full_cap0) / 100; + max17042_write_verify_reg(chip->client, MAX17042_RemCap, (u16)rem_cap); + + rep_cap = (u16)rem_cap; + max17042_write_verify_reg(chip->client, MAX17042_RepCap, rep_cap); + + /* Write dQ_acc to 200% of Capacity and dP_acc to 200% */ + dq_acc = config->fullcap / dQ_ACC_DIV; + max17042_write_verify_reg(chip->client, MAX17042_dQacc, dq_acc); + max17042_write_verify_reg(chip->client, MAX17042_dPacc, dP_ACC_200); + + max17042_write_verify_reg(chip->client, MAX17042_FullCAP, + config->fullcap); + max17042_write_reg(chip->client, MAX17042_DesignCap, + config->design_cap); + max17042_write_verify_reg(chip->client, MAX17042_FullCAPNom, + config->fullcapnom); +} + +/* + * Block write all the override values coming from platform data. + * This function MUST be called before the POR initialization proceedure + * specified by maxim. + */ +static inline void max17042_override_por_values(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_override_por(client, MAX17042_TGAIN, config->tgain); + max17042_override_por(client, MAx17042_TOFF, config->toff); + max17042_override_por(client, MAX17042_CGAIN, config->cgain); + max17042_override_por(client, MAX17042_COFF, config->coff); + + max17042_override_por(client, MAX17042_VALRT_Th, config->valrt_thresh); + max17042_override_por(client, MAX17042_TALRT_Th, config->talrt_thresh); + max17042_override_por(client, MAX17042_SALRT_Th, + config->soc_alrt_thresh); + max17042_override_por(client, MAX17042_CONFIG, config->config); + max17042_override_por(client, MAX17042_SHDNTIMER, config->shdntimer); + + max17042_override_por(client, MAX17042_DesignCap, config->design_cap); + max17042_override_por(client, MAX17042_ICHGTerm, config->ichgt_term); + + max17042_override_por(client, MAX17042_AtRate, config->at_rate); + max17042_override_por(client, MAX17042_LearnCFG, config->learn_cfg); + max17042_override_por(client, MAX17042_FilterCFG, config->filter_cfg); + max17042_override_por(client, MAX17042_RelaxCFG, config->relax_cfg); + max17042_override_por(client, MAX17042_MiscCFG, config->misc_cfg); + max17042_override_por(client, MAX17042_MaskSOC, config->masksoc); + + max17042_override_por(client, MAX17042_FullCAP, config->fullcap); + max17042_override_por(client, MAX17042_FullCAPNom, config->fullcapnom); + max17042_override_por(client, MAX17042_SOC_empty, config->socempty); + max17042_override_por(client, MAX17042_LAvg_empty, config->lavg_empty); + max17042_override_por(client, MAX17042_dQacc, config->dqacc); + max17042_override_por(client, MAX17042_dPacc, config->dpacc); + + max17042_override_por(client, MAX17042_V_empty, config->vempty); + max17042_override_por(client, MAX17042_TempNom, config->temp_nom); + max17042_override_por(client, MAX17042_TempLim, config->temp_lim); + max17042_override_por(client, MAX17042_FCTC, config->fctc); + max17042_override_por(client, MAX17042_RCOMP0, config->rcomp0); + max17042_override_por(client, MAX17042_TempCo, config->tcompc0); + max17042_override_por(client, MAX17042_EmptyTempCo, + config->empty_tempco); + max17042_override_por(client, MAX17042_K_empty0, config->kempty0); +} + +static int max17042_init_chip(struct max17042_chip *chip) +{ + int ret; + int val; + + max17042_override_por_values(chip); + /* After Power up, the MAX17042 requires 500mS in order + * to perform signal debouncing and initial SOC reporting + */ + msleep(500); + + /* Initialize configaration */ + max17042_write_config_regs(chip); + + /* write cell characterization data */ + ret = max17042_init_model(chip); + if (ret) { + dev_err(&chip->client->dev, "%s init failed\n", + __func__); + return -EIO; + } + max17042_verify_model_lock(chip); + if (ret) { + dev_err(&chip->client->dev, "%s lock verify failed\n", + __func__); + return -EIO; + } + /* write custom parameters */ + max17042_write_custom_regs(chip); + + /* update capacity params */ + max17042_update_capacity_regs(chip); + + /* delay must be atleast 350mS to allow VFSOC + * to be calculated from the new configuration + */ + msleep(350); + + /* reset vfsoc0 reg */ + max17042_reset_vfsoc0_reg(chip); + + /* load new capacity params */ + max17042_load_new_capacity_params(chip); + + /* Init complete, Clear the POR bit */ + val = max17042_read_reg(chip->client, MAX17042_STATUS); + max17042_write_reg(chip->client, MAX17042_STATUS, + val & (~STATUS_POR_BIT)); + return 0; +} + +static void max17042_set_soc_threshold(struct max17042_chip *chip, u16 off) +{ + u16 soc, soc_tr; + + /* program interrupt thesholds such that we should + * get interrupt for every 'off' perc change in the soc + */ + soc = max17042_read_reg(chip->client, MAX17042_RepSOC) >> 8; + soc_tr = (soc + off) << 8; + soc_tr |= (soc - off); + max17042_write_reg(chip->client, MAX17042_SALRT_Th, soc_tr); +} + +static irqreturn_t max17042_thread_handler(int id, void *dev) +{ + struct max17042_chip *chip = dev; + u16 val; + + val = max17042_read_reg(chip->client, MAX17042_STATUS); + if ((val & STATUS_INTR_SOCMIN_BIT) || + (val & STATUS_INTR_SOCMAX_BIT)) { + dev_info(&chip->client->dev, "SOC threshold INTR\n"); + max17042_set_soc_threshold(chip, 1); + } + + power_supply_changed(&chip->battery); + return IRQ_HANDLED; +} + +static void max17042_init_worker(struct work_struct *work) +{ + struct max17042_chip *chip = container_of(work, + struct max17042_chip, work); + int ret; + + /* Initialize registers according to values from the platform data */ + if (chip->pdata->enable_por_init && chip->pdata->config_data) { + ret = max17042_init_chip(chip); + if (ret) + return; + } + + chip->init_complete = 1; +} + +#ifdef CONFIG_OF +static struct max17042_platform_data * +max17042_get_pdata(struct device *dev) +{ + struct device_node *np = dev->of_node; + u32 prop; + struct max17042_platform_data *pdata; + + if (!np) + return dev->platform_data; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + /* + * Require current sense resistor value to be specified for + * current-sense functionality to be enabled at all. + */ + if (of_property_read_u32(np, "maxim,rsns-microohm", &prop) == 0) { + pdata->r_sns = prop; + pdata->enable_current_sense = true; + } + + return pdata; +} +#else +static struct max17042_platform_data * +max17042_get_pdata(struct device *dev) +{ + return dev->platform_data; +} +#endif + static int __devinit max17042_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct max17042_chip *chip; int ret; + int reg; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EIO; - chip = kzalloc(sizeof(*chip), GFP_KERNEL); + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; chip->client = client; - chip->pdata = client->dev.platform_data; + chip->pdata = max17042_get_pdata(&client->dev); + if (!chip->pdata) { + dev_err(&client->dev, "no platform data provided\n"); + return -EINVAL; + } i2c_set_clientdata(client, chip); @@ -243,17 +673,9 @@ static int __devinit max17042_probe(struct i2c_client *client, if (chip->pdata->r_sns == 0) chip->pdata->r_sns = MAX17042_DEFAULT_SNS_RESISTOR; - ret = power_supply_register(&client->dev, &chip->battery); - if (ret) { - dev_err(&client->dev, "failed: power supply register\n"); - kfree(chip); - return ret; - } - - /* Initialize registers according to values from the platform data */ if (chip->pdata->init_data) max17042_set_reg(client, chip->pdata->init_data, - chip->pdata->num_init_data); + chip->pdata->num_init_data); if (!chip->pdata->enable_current_sense) { max17042_write_reg(client, MAX17042_CGAIN, 0x0000); @@ -261,7 +683,34 @@ static int __devinit max17042_probe(struct i2c_client *client, max17042_write_reg(client, MAX17042_LearnCFG, 0x0007); } - return 0; + if (client->irq) { + ret = request_threaded_irq(client->irq, NULL, + max17042_thread_handler, + IRQF_TRIGGER_FALLING, + chip->battery.name, chip); + if (!ret) { + reg = max17042_read_reg(client, MAX17042_CONFIG); + reg |= CONFIG_ALRT_BIT_ENBL; + max17042_write_reg(client, MAX17042_CONFIG, reg); + max17042_set_soc_threshold(chip, 1); + } else + dev_err(&client->dev, "%s(): cannot get IRQ\n", + __func__); + } + + reg = max17042_read_reg(chip->client, MAX17042_STATUS); + + if (reg & STATUS_POR_BIT) { + INIT_WORK(&chip->work, max17042_init_worker); + schedule_work(&chip->work); + } else { + chip->init_complete = 1; + } + + ret = power_supply_register(&client->dev, &chip->battery); + if (ret) + dev_err(&client->dev, "failed: power supply register\n"); + return ret; } static int __devexit max17042_remove(struct i2c_client *client) @@ -269,10 +718,17 @@ static int __devexit max17042_remove(struct i2c_client *client) struct max17042_chip *chip = i2c_get_clientdata(client); power_supply_unregister(&chip->battery); - kfree(chip); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id max17042_dt_match[] = { + { .compatible = "maxim,max17042" }, + { }, +}; +MODULE_DEVICE_TABLE(of, max17042_dt_match); +#endif + static const struct i2c_device_id max17042_id[] = { { "max17042", 0 }, { } @@ -282,23 +738,13 @@ MODULE_DEVICE_TABLE(i2c, max17042_id); static struct i2c_driver max17042_i2c_driver = { .driver = { .name = "max17042", + .of_match_table = of_match_ptr(max17042_dt_match), }, .probe = max17042_probe, .remove = __devexit_p(max17042_remove), .id_table = max17042_id, }; - -static int __init max17042_init(void) -{ - return i2c_add_driver(&max17042_i2c_driver); -} -module_init(max17042_init); - -static void __exit max17042_exit(void) -{ - i2c_del_driver(&max17042_i2c_driver); -} -module_exit(max17042_exit); +module_i2c_driver(max17042_i2c_driver); MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); MODULE_DESCRIPTION("MAX17042 Fuel Gauge"); diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c index 9ff8af069da6..06b659d91790 100644 --- a/drivers/power/sbs-battery.c +++ b/drivers/power/sbs-battery.c @@ -852,18 +852,7 @@ static struct i2c_driver sbs_battery_driver = { .of_match_table = sbs_dt_ids, }, }; - -static int __init sbs_battery_init(void) -{ - return i2c_add_driver(&sbs_battery_driver); -} -module_init(sbs_battery_init); - -static void __exit sbs_battery_exit(void) -{ - i2c_del_driver(&sbs_battery_driver); -} -module_exit(sbs_battery_exit); +module_i2c_driver(sbs_battery_driver); MODULE_DESCRIPTION("SBS battery monitor driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/power/smb347-charger.c b/drivers/power/smb347-charger.c new file mode 100644 index 000000000000..ce1694d1a365 --- /dev/null +++ b/drivers/power/smb347-charger.c @@ -0,0 +1,1294 @@ +/* + * Summit Microelectronics SMB347 Battery Charger Driver + * + * Copyright (C) 2011, Intel Corporation + * + * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/debugfs.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/power_supply.h> +#include <linux/power/smb347-charger.h> +#include <linux/seq_file.h> + +/* + * Configuration registers. These are mirrored to volatile RAM and can be + * written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be + * reloaded from non-volatile registers after POR. + */ +#define CFG_CHARGE_CURRENT 0x00 +#define CFG_CHARGE_CURRENT_FCC_MASK 0xe0 +#define CFG_CHARGE_CURRENT_FCC_SHIFT 5 +#define CFG_CHARGE_CURRENT_PCC_MASK 0x18 +#define CFG_CHARGE_CURRENT_PCC_SHIFT 3 +#define CFG_CHARGE_CURRENT_TC_MASK 0x07 +#define CFG_CURRENT_LIMIT 0x01 +#define CFG_CURRENT_LIMIT_DC_MASK 0xf0 +#define CFG_CURRENT_LIMIT_DC_SHIFT 4 +#define CFG_CURRENT_LIMIT_USB_MASK 0x0f +#define CFG_FLOAT_VOLTAGE 0x03 +#define CFG_FLOAT_VOLTAGE_THRESHOLD_MASK 0xc0 +#define CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT 6 +#define CFG_STAT 0x05 +#define CFG_STAT_DISABLED BIT(5) +#define CFG_STAT_ACTIVE_HIGH BIT(7) +#define CFG_PIN 0x06 +#define CFG_PIN_EN_CTRL_MASK 0x60 +#define CFG_PIN_EN_CTRL_ACTIVE_HIGH 0x40 +#define CFG_PIN_EN_CTRL_ACTIVE_LOW 0x60 +#define CFG_PIN_EN_APSD_IRQ BIT(1) +#define CFG_PIN_EN_CHARGER_ERROR BIT(2) +#define CFG_THERM 0x07 +#define CFG_THERM_SOFT_HOT_COMPENSATION_MASK 0x03 +#define CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT 0 +#define CFG_THERM_SOFT_COLD_COMPENSATION_MASK 0x0c +#define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT 2 +#define CFG_THERM_MONITOR_DISABLED BIT(4) +#define CFG_SYSOK 0x08 +#define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED BIT(2) +#define CFG_OTHER 0x09 +#define CFG_OTHER_RID_MASK 0xc0 +#define CFG_OTHER_RID_ENABLED_AUTO_OTG 0xc0 +#define CFG_OTG 0x0a +#define CFG_OTG_TEMP_THRESHOLD_MASK 0x30 +#define CFG_OTG_TEMP_THRESHOLD_SHIFT 4 +#define CFG_OTG_CC_COMPENSATION_MASK 0xc0 +#define CFG_OTG_CC_COMPENSATION_SHIFT 6 +#define CFG_TEMP_LIMIT 0x0b +#define CFG_TEMP_LIMIT_SOFT_HOT_MASK 0x03 +#define CFG_TEMP_LIMIT_SOFT_HOT_SHIFT 0 +#define CFG_TEMP_LIMIT_SOFT_COLD_MASK 0x0c +#define CFG_TEMP_LIMIT_SOFT_COLD_SHIFT 2 +#define CFG_TEMP_LIMIT_HARD_HOT_MASK 0x30 +#define CFG_TEMP_LIMIT_HARD_HOT_SHIFT 4 +#define CFG_TEMP_LIMIT_HARD_COLD_MASK 0xc0 +#define CFG_TEMP_LIMIT_HARD_COLD_SHIFT 6 +#define CFG_FAULT_IRQ 0x0c +#define CFG_FAULT_IRQ_DCIN_UV BIT(2) +#define CFG_STATUS_IRQ 0x0d +#define CFG_STATUS_IRQ_TERMINATION_OR_TAPER BIT(4) +#define CFG_ADDRESS 0x0e + +/* Command registers */ +#define CMD_A 0x30 +#define CMD_A_CHG_ENABLED BIT(1) +#define CMD_A_SUSPEND_ENABLED BIT(2) +#define CMD_A_ALLOW_WRITE BIT(7) +#define CMD_B 0x31 +#define CMD_C 0x33 + +/* Interrupt Status registers */ +#define IRQSTAT_A 0x35 +#define IRQSTAT_C 0x37 +#define IRQSTAT_C_TERMINATION_STAT BIT(0) +#define IRQSTAT_C_TERMINATION_IRQ BIT(1) +#define IRQSTAT_C_TAPER_IRQ BIT(3) +#define IRQSTAT_E 0x39 +#define IRQSTAT_E_USBIN_UV_STAT BIT(0) +#define IRQSTAT_E_USBIN_UV_IRQ BIT(1) +#define IRQSTAT_E_DCIN_UV_STAT BIT(4) +#define IRQSTAT_E_DCIN_UV_IRQ BIT(5) +#define IRQSTAT_F 0x3a + +/* Status registers */ +#define STAT_A 0x3b +#define STAT_A_FLOAT_VOLTAGE_MASK 0x3f +#define STAT_B 0x3c +#define STAT_C 0x3d +#define STAT_C_CHG_ENABLED BIT(0) +#define STAT_C_CHG_MASK 0x06 +#define STAT_C_CHG_SHIFT 1 +#define STAT_C_CHARGER_ERROR BIT(6) +#define STAT_E 0x3f + +/** + * struct smb347_charger - smb347 charger instance + * @lock: protects concurrent access to online variables + * @client: pointer to i2c client + * @mains: power_supply instance for AC/DC power + * @usb: power_supply instance for USB power + * @battery: power_supply instance for battery + * @mains_online: is AC/DC input connected + * @usb_online: is USB input connected + * @charging_enabled: is charging enabled + * @dentry: for debugfs + * @pdata: pointer to platform data + */ +struct smb347_charger { + struct mutex lock; + struct i2c_client *client; + struct power_supply mains; + struct power_supply usb; + struct power_supply battery; + bool mains_online; + bool usb_online; + bool charging_enabled; + struct dentry *dentry; + const struct smb347_charger_platform_data *pdata; +}; + +/* Fast charge current in uA */ +static const unsigned int fcc_tbl[] = { + 700000, + 900000, + 1200000, + 1500000, + 1800000, + 2000000, + 2200000, + 2500000, +}; + +/* Pre-charge current in uA */ +static const unsigned int pcc_tbl[] = { + 100000, + 150000, + 200000, + 250000, +}; + +/* Termination current in uA */ +static const unsigned int tc_tbl[] = { + 37500, + 50000, + 100000, + 150000, + 200000, + 250000, + 500000, + 600000, +}; + +/* Input current limit in uA */ +static const unsigned int icl_tbl[] = { + 300000, + 500000, + 700000, + 900000, + 1200000, + 1500000, + 1800000, + 2000000, + 2200000, + 2500000, +}; + +/* Charge current compensation in uA */ +static const unsigned int ccc_tbl[] = { + 250000, + 700000, + 900000, + 1200000, +}; + +/* Convert register value to current using lookup table */ +static int hw_to_current(const unsigned int *tbl, size_t size, unsigned int val) +{ + if (val >= size) + return -EINVAL; + return tbl[val]; +} + +/* Convert current to register value using lookup table */ +static int current_to_hw(const unsigned int *tbl, size_t size, unsigned int val) +{ + size_t i; + + for (i = 0; i < size; i++) + if (val < tbl[i]) + break; + return i > 0 ? i - 1 : -EINVAL; +} + +static int smb347_read(struct smb347_charger *smb, u8 reg) +{ + int ret; + + ret = i2c_smbus_read_byte_data(smb->client, reg); + if (ret < 0) + dev_warn(&smb->client->dev, "failed to read reg 0x%x: %d\n", + reg, ret); + return ret; +} + +static int smb347_write(struct smb347_charger *smb, u8 reg, u8 val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(smb->client, reg, val); + if (ret < 0) + dev_warn(&smb->client->dev, "failed to write reg 0x%x: %d\n", + reg, ret); + return ret; +} + +/** + * smb347_update_status - updates the charging status + * @smb: pointer to smb347 charger instance + * + * Function checks status of the charging and updates internal state + * accordingly. Returns %0 if there is no change in status, %1 if the + * status has changed and negative errno in case of failure. + */ +static int smb347_update_status(struct smb347_charger *smb) +{ + bool usb = false; + bool dc = false; + int ret; + + ret = smb347_read(smb, IRQSTAT_E); + if (ret < 0) + return ret; + + /* + * Dc and usb are set depending on whether they are enabled in + * platform data _and_ whether corresponding undervoltage is set. + */ + if (smb->pdata->use_mains) + dc = !(ret & IRQSTAT_E_DCIN_UV_STAT); + if (smb->pdata->use_usb) + usb = !(ret & IRQSTAT_E_USBIN_UV_STAT); + + mutex_lock(&smb->lock); + ret = smb->mains_online != dc || smb->usb_online != usb; + smb->mains_online = dc; + smb->usb_online = usb; + mutex_unlock(&smb->lock); + + return ret; +} + +/* + * smb347_is_online - returns whether input power source is connected + * @smb: pointer to smb347 charger instance + * + * Returns %true if input power source is connected. Note that this is + * dependent on what platform has configured for usable power sources. For + * example if USB is disabled, this will return %false even if the USB + * cable is connected. + */ +static bool smb347_is_online(struct smb347_charger *smb) +{ + bool ret; + + mutex_lock(&smb->lock); + ret = smb->usb_online || smb->mains_online; + mutex_unlock(&smb->lock); + + return ret; +} + +/** + * smb347_charging_status - returns status of charging + * @smb: pointer to smb347 charger instance + * + * Function returns charging status. %0 means no charging is in progress, + * %1 means pre-charging, %2 fast-charging and %3 taper-charging. + */ +static int smb347_charging_status(struct smb347_charger *smb) +{ + int ret; + + if (!smb347_is_online(smb)) + return 0; + + ret = smb347_read(smb, STAT_C); + if (ret < 0) + return 0; + + return (ret & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT; +} + +static int smb347_charging_set(struct smb347_charger *smb, bool enable) +{ + int ret = 0; + + if (smb->pdata->enable_control != SMB347_CHG_ENABLE_SW) { + dev_dbg(&smb->client->dev, + "charging enable/disable in SW disabled\n"); + return 0; + } + + mutex_lock(&smb->lock); + if (smb->charging_enabled != enable) { + ret = smb347_read(smb, CMD_A); + if (ret < 0) + goto out; + + smb->charging_enabled = enable; + + if (enable) + ret |= CMD_A_CHG_ENABLED; + else + ret &= ~CMD_A_CHG_ENABLED; + + ret = smb347_write(smb, CMD_A, ret); + } +out: + mutex_unlock(&smb->lock); + return ret; +} + +static inline int smb347_charging_enable(struct smb347_charger *smb) +{ + return smb347_charging_set(smb, true); +} + +static inline int smb347_charging_disable(struct smb347_charger *smb) +{ + return smb347_charging_set(smb, false); +} + +static int smb347_update_online(struct smb347_charger *smb) +{ + int ret; + + /* + * Depending on whether valid power source is connected or not, we + * disable or enable the charging. We do it manually because it + * depends on how the platform has configured the valid inputs. + */ + if (smb347_is_online(smb)) { + ret = smb347_charging_enable(smb); + if (ret < 0) + dev_err(&smb->client->dev, + "failed to enable charging\n"); + } else { + ret = smb347_charging_disable(smb); + if (ret < 0) + dev_err(&smb->client->dev, + "failed to disable charging\n"); + } + + return ret; +} + +static int smb347_set_charge_current(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_CHARGE_CURRENT); + if (ret < 0) + return ret; + + if (smb->pdata->max_charge_current) { + val = current_to_hw(fcc_tbl, ARRAY_SIZE(fcc_tbl), + smb->pdata->max_charge_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_FCC_MASK; + ret |= val << CFG_CHARGE_CURRENT_FCC_SHIFT; + } + + if (smb->pdata->pre_charge_current) { + val = current_to_hw(pcc_tbl, ARRAY_SIZE(pcc_tbl), + smb->pdata->pre_charge_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_PCC_MASK; + ret |= val << CFG_CHARGE_CURRENT_PCC_SHIFT; + } + + if (smb->pdata->termination_current) { + val = current_to_hw(tc_tbl, ARRAY_SIZE(tc_tbl), + smb->pdata->termination_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_TC_MASK; + ret |= val; + } + + return smb347_write(smb, CFG_CHARGE_CURRENT, ret); +} + +static int smb347_set_current_limits(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_CURRENT_LIMIT); + if (ret < 0) + return ret; + + if (smb->pdata->mains_current_limit) { + val = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl), + smb->pdata->mains_current_limit); + if (val < 0) + return val; + + ret &= ~CFG_CURRENT_LIMIT_DC_MASK; + ret |= val << CFG_CURRENT_LIMIT_DC_SHIFT; + } + + if (smb->pdata->usb_hc_current_limit) { + val = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl), + smb->pdata->usb_hc_current_limit); + if (val < 0) + return val; + + ret &= ~CFG_CURRENT_LIMIT_USB_MASK; + ret |= val; + } + + return smb347_write(smb, CFG_CURRENT_LIMIT, ret); +} + +static int smb347_set_voltage_limits(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_FLOAT_VOLTAGE); + if (ret < 0) + return ret; + + if (smb->pdata->pre_to_fast_voltage) { + val = smb->pdata->pre_to_fast_voltage; + + /* uV */ + val = clamp_val(val, 2400000, 3000000) - 2400000; + val /= 200000; + + ret &= ~CFG_FLOAT_VOLTAGE_THRESHOLD_MASK; + ret |= val << CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT; + } + + if (smb->pdata->max_charge_voltage) { + val = smb->pdata->max_charge_voltage; + + /* uV */ + val = clamp_val(val, 3500000, 4500000) - 3500000; + val /= 20000; + + ret |= val; + } + + return smb347_write(smb, CFG_FLOAT_VOLTAGE, ret); +} + +static int smb347_set_temp_limits(struct smb347_charger *smb) +{ + bool enable_therm_monitor = false; + int ret, val; + + if (smb->pdata->chip_temp_threshold) { + val = smb->pdata->chip_temp_threshold; + + /* degree C */ + val = clamp_val(val, 100, 130) - 100; + val /= 10; + + ret = smb347_read(smb, CFG_OTG); + if (ret < 0) + return ret; + + ret &= ~CFG_OTG_TEMP_THRESHOLD_MASK; + ret |= val << CFG_OTG_TEMP_THRESHOLD_SHIFT; + + ret = smb347_write(smb, CFG_OTG, ret); + if (ret < 0) + return ret; + } + + ret = smb347_read(smb, CFG_TEMP_LIMIT); + if (ret < 0) + return ret; + + if (smb->pdata->soft_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->soft_cold_temp_limit; + + val = clamp_val(val, 0, 15); + val /= 5; + /* this goes from higher to lower so invert the value */ + val = ~val & 0x3; + + ret &= ~CFG_TEMP_LIMIT_SOFT_COLD_MASK; + ret |= val << CFG_TEMP_LIMIT_SOFT_COLD_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->soft_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->soft_hot_temp_limit; + + val = clamp_val(val, 40, 55) - 40; + val /= 5; + + ret &= ~CFG_TEMP_LIMIT_SOFT_HOT_MASK; + ret |= val << CFG_TEMP_LIMIT_SOFT_HOT_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->hard_cold_temp_limit; + + val = clamp_val(val, -5, 10) + 5; + val /= 5; + /* this goes from higher to lower so invert the value */ + val = ~val & 0x3; + + ret &= ~CFG_TEMP_LIMIT_HARD_COLD_MASK; + ret |= val << CFG_TEMP_LIMIT_HARD_COLD_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->hard_hot_temp_limit; + + val = clamp_val(val, 50, 65) - 50; + val /= 5; + + ret &= ~CFG_TEMP_LIMIT_HARD_HOT_MASK; + ret |= val << CFG_TEMP_LIMIT_HARD_HOT_SHIFT; + + enable_therm_monitor = true; + } + + ret = smb347_write(smb, CFG_TEMP_LIMIT, ret); + if (ret < 0) + return ret; + + /* + * If any of the temperature limits are set, we also enable the + * thermistor monitoring. + * + * When soft limits are hit, the device will start to compensate + * current and/or voltage depending on the configuration. + * + * When hard limit is hit, the device will suspend charging + * depending on the configuration. + */ + if (enable_therm_monitor) { + ret = smb347_read(smb, CFG_THERM); + if (ret < 0) + return ret; + + ret &= ~CFG_THERM_MONITOR_DISABLED; + + ret = smb347_write(smb, CFG_THERM, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->suspend_on_hard_temp_limit) { + ret = smb347_read(smb, CFG_SYSOK); + if (ret < 0) + return ret; + + ret &= ~CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED; + + ret = smb347_write(smb, CFG_SYSOK, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->soft_temp_limit_compensation != + SMB347_SOFT_TEMP_COMPENSATE_DEFAULT) { + val = smb->pdata->soft_temp_limit_compensation & 0x3; + + ret = smb347_read(smb, CFG_THERM); + if (ret < 0) + return ret; + + ret &= ~CFG_THERM_SOFT_HOT_COMPENSATION_MASK; + ret |= val << CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT; + + ret &= ~CFG_THERM_SOFT_COLD_COMPENSATION_MASK; + ret |= val << CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT; + + ret = smb347_write(smb, CFG_THERM, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->charge_current_compensation) { + val = current_to_hw(ccc_tbl, ARRAY_SIZE(ccc_tbl), + smb->pdata->charge_current_compensation); + if (val < 0) + return val; + + ret = smb347_read(smb, CFG_OTG); + if (ret < 0) + return ret; + + ret &= ~CFG_OTG_CC_COMPENSATION_MASK; + ret |= (val & 0x3) << CFG_OTG_CC_COMPENSATION_SHIFT; + + ret = smb347_write(smb, CFG_OTG, ret); + if (ret < 0) + return ret; + } + + return ret; +} + +/* + * smb347_set_writable - enables/disables writing to non-volatile registers + * @smb: pointer to smb347 charger instance + * + * You can enable/disable writing to the non-volatile configuration + * registers by calling this function. + * + * Returns %0 on success and negative errno in case of failure. + */ +static int smb347_set_writable(struct smb347_charger *smb, bool writable) +{ + int ret; + + ret = smb347_read(smb, CMD_A); + if (ret < 0) + return ret; + + if (writable) + ret |= CMD_A_ALLOW_WRITE; + else + ret &= ~CMD_A_ALLOW_WRITE; + + return smb347_write(smb, CMD_A, ret); +} + +static int smb347_hw_init(struct smb347_charger *smb) +{ + int ret; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + return ret; + + /* + * Program the platform specific configuration values to the device + * first. + */ + ret = smb347_set_charge_current(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_current_limits(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_voltage_limits(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_temp_limits(smb); + if (ret < 0) + goto fail; + + /* If USB charging is disabled we put the USB in suspend mode */ + if (!smb->pdata->use_usb) { + ret = smb347_read(smb, CMD_A); + if (ret < 0) + goto fail; + + ret |= CMD_A_SUSPEND_ENABLED; + + ret = smb347_write(smb, CMD_A, ret); + if (ret < 0) + goto fail; + } + + ret = smb347_read(smb, CFG_OTHER); + if (ret < 0) + goto fail; + + /* + * If configured by platform data, we enable hardware Auto-OTG + * support for driving VBUS. Otherwise we disable it. + */ + ret &= ~CFG_OTHER_RID_MASK; + if (smb->pdata->use_usb_otg) + ret |= CFG_OTHER_RID_ENABLED_AUTO_OTG; + + ret = smb347_write(smb, CFG_OTHER, ret); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + /* + * Make the charging functionality controllable by a write to the + * command register unless pin control is specified in the platform + * data. + */ + ret &= ~CFG_PIN_EN_CTRL_MASK; + + switch (smb->pdata->enable_control) { + case SMB347_CHG_ENABLE_SW: + /* Do nothing, 0 means i2c control */ + break; + case SMB347_CHG_ENABLE_PIN_ACTIVE_LOW: + ret |= CFG_PIN_EN_CTRL_ACTIVE_LOW; + break; + case SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH: + ret |= CFG_PIN_EN_CTRL_ACTIVE_HIGH; + break; + } + + /* Disable Automatic Power Source Detection (APSD) interrupt. */ + ret &= ~CFG_PIN_EN_APSD_IRQ; + + ret = smb347_write(smb, CFG_PIN, ret); + if (ret < 0) + goto fail; + + ret = smb347_update_status(smb); + if (ret < 0) + goto fail; + + ret = smb347_update_online(smb); + +fail: + smb347_set_writable(smb, false); + return ret; +} + +static irqreturn_t smb347_interrupt(int irq, void *data) +{ + struct smb347_charger *smb = data; + int stat_c, irqstat_e, irqstat_c; + irqreturn_t ret = IRQ_NONE; + + stat_c = smb347_read(smb, STAT_C); + if (stat_c < 0) { + dev_warn(&smb->client->dev, "reading STAT_C failed\n"); + return IRQ_NONE; + } + + irqstat_c = smb347_read(smb, IRQSTAT_C); + if (irqstat_c < 0) { + dev_warn(&smb->client->dev, "reading IRQSTAT_C failed\n"); + return IRQ_NONE; + } + + irqstat_e = smb347_read(smb, IRQSTAT_E); + if (irqstat_e < 0) { + dev_warn(&smb->client->dev, "reading IRQSTAT_E failed\n"); + return IRQ_NONE; + } + + /* + * If we get charger error we report the error back to user and + * disable charging. + */ + if (stat_c & STAT_C_CHARGER_ERROR) { + dev_err(&smb->client->dev, + "error in charger, disabling charging\n"); + + smb347_charging_disable(smb); + power_supply_changed(&smb->battery); + + ret = IRQ_HANDLED; + } + + /* + * If we reached the termination current the battery is charged and + * we can update the status now. Charging is automatically + * disabled by the hardware. + */ + if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) { + if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) + power_supply_changed(&smb->battery); + ret = IRQ_HANDLED; + } + + /* + * If we got an under voltage interrupt it means that AC/USB input + * was connected or disconnected. + */ + if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) { + if (smb347_update_status(smb) > 0) { + smb347_update_online(smb); + power_supply_changed(&smb->mains); + power_supply_changed(&smb->usb); + } + ret = IRQ_HANDLED; + } + + return ret; +} + +static int smb347_irq_set(struct smb347_charger *smb, bool enable) +{ + int ret; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + return ret; + + /* + * Enable/disable interrupts for: + * - under voltage + * - termination current reached + * - charger error + */ + if (enable) { + ret = smb347_write(smb, CFG_FAULT_IRQ, CFG_FAULT_IRQ_DCIN_UV); + if (ret < 0) + goto fail; + + ret = smb347_write(smb, CFG_STATUS_IRQ, + CFG_STATUS_IRQ_TERMINATION_OR_TAPER); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + ret |= CFG_PIN_EN_CHARGER_ERROR; + + ret = smb347_write(smb, CFG_PIN, ret); + } else { + ret = smb347_write(smb, CFG_FAULT_IRQ, 0); + if (ret < 0) + goto fail; + + ret = smb347_write(smb, CFG_STATUS_IRQ, 0); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + ret &= ~CFG_PIN_EN_CHARGER_ERROR; + + ret = smb347_write(smb, CFG_PIN, ret); + } + +fail: + smb347_set_writable(smb, false); + return ret; +} + +static inline int smb347_irq_enable(struct smb347_charger *smb) +{ + return smb347_irq_set(smb, true); +} + +static inline int smb347_irq_disable(struct smb347_charger *smb) +{ + return smb347_irq_set(smb, false); +} + +static int smb347_irq_init(struct smb347_charger *smb) +{ + const struct smb347_charger_platform_data *pdata = smb->pdata; + int ret, irq = gpio_to_irq(pdata->irq_gpio); + + ret = gpio_request_one(pdata->irq_gpio, GPIOF_IN, smb->client->name); + if (ret < 0) + goto fail; + + ret = request_threaded_irq(irq, NULL, smb347_interrupt, + IRQF_TRIGGER_FALLING, smb->client->name, + smb); + if (ret < 0) + goto fail_gpio; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + goto fail_irq; + + /* + * Configure the STAT output to be suitable for interrupts: disable + * all other output (except interrupts) and make it active low. + */ + ret = smb347_read(smb, CFG_STAT); + if (ret < 0) + goto fail_readonly; + + ret &= ~CFG_STAT_ACTIVE_HIGH; + ret |= CFG_STAT_DISABLED; + + ret = smb347_write(smb, CFG_STAT, ret); + if (ret < 0) + goto fail_readonly; + + ret = smb347_irq_enable(smb); + if (ret < 0) + goto fail_readonly; + + smb347_set_writable(smb, false); + smb->client->irq = irq; + return 0; + +fail_readonly: + smb347_set_writable(smb, false); +fail_irq: + free_irq(irq, smb); +fail_gpio: + gpio_free(pdata->irq_gpio); +fail: + smb->client->irq = 0; + return ret; +} + +static int smb347_mains_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, mains); + + if (prop == POWER_SUPPLY_PROP_ONLINE) { + val->intval = smb->mains_online; + return 0; + } + return -EINVAL; +} + +static enum power_supply_property smb347_mains_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int smb347_usb_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, usb); + + if (prop == POWER_SUPPLY_PROP_ONLINE) { + val->intval = smb->usb_online; + return 0; + } + return -EINVAL; +} + +static enum power_supply_property smb347_usb_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int smb347_battery_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, battery); + const struct smb347_charger_platform_data *pdata = smb->pdata; + int ret; + + ret = smb347_update_status(smb); + if (ret < 0) + return ret; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + if (!smb347_is_online(smb)) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + } + if (smb347_charging_status(smb)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (!smb347_is_online(smb)) + return -ENODATA; + + /* + * We handle trickle and pre-charging the same, and taper + * and none the same. + */ + switch (smb347_charging_status(smb)) { + case 1: + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case 2: + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + default: + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = pdata->battery_info.technology; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = pdata->battery_info.voltage_min_design; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = pdata->battery_info.voltage_max_design; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (!smb347_is_online(smb)) + return -ENODATA; + ret = smb347_read(smb, STAT_A); + if (ret < 0) + return ret; + + ret &= STAT_A_FLOAT_VOLTAGE_MASK; + if (ret > 0x3d) + ret = 0x3d; + + val->intval = 3500000 + ret * 20000; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (!smb347_is_online(smb)) + return -ENODATA; + + ret = smb347_read(smb, STAT_B); + if (ret < 0) + return ret; + + /* + * The current value is composition of FCC and PCC values + * and we can detect which table to use from bit 5. + */ + if (ret & 0x20) { + val->intval = hw_to_current(fcc_tbl, + ARRAY_SIZE(fcc_tbl), + ret & 7); + } else { + ret >>= 3; + val->intval = hw_to_current(pcc_tbl, + ARRAY_SIZE(pcc_tbl), + ret & 7); + } + break; + + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = pdata->battery_info.charge_full_design; + break; + + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = pdata->battery_info.name; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property smb347_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_MODEL_NAME, +}; + +static int smb347_debugfs_show(struct seq_file *s, void *data) +{ + struct smb347_charger *smb = s->private; + int ret; + u8 reg; + + seq_printf(s, "Control registers:\n"); + seq_printf(s, "==================\n"); + for (reg = CFG_CHARGE_CURRENT; reg <= CFG_ADDRESS; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + seq_printf(s, "\n"); + + seq_printf(s, "Command registers:\n"); + seq_printf(s, "==================\n"); + ret = smb347_read(smb, CMD_A); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_A, ret); + ret = smb347_read(smb, CMD_B); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_B, ret); + ret = smb347_read(smb, CMD_C); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_C, ret); + seq_printf(s, "\n"); + + seq_printf(s, "Interrupt status registers:\n"); + seq_printf(s, "===========================\n"); + for (reg = IRQSTAT_A; reg <= IRQSTAT_F; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + seq_printf(s, "\n"); + + seq_printf(s, "Status registers:\n"); + seq_printf(s, "=================\n"); + for (reg = STAT_A; reg <= STAT_E; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + + return 0; +} + +static int smb347_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, smb347_debugfs_show, inode->i_private); +} + +static const struct file_operations smb347_debugfs_fops = { + .open = smb347_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smb347_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + static char *battery[] = { "smb347-battery" }; + const struct smb347_charger_platform_data *pdata; + struct device *dev = &client->dev; + struct smb347_charger *smb; + int ret; + + pdata = dev->platform_data; + if (!pdata) + return -EINVAL; + + if (!pdata->use_mains && !pdata->use_usb) + return -EINVAL; + + smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL); + if (!smb) + return -ENOMEM; + + i2c_set_clientdata(client, smb); + + mutex_init(&smb->lock); + smb->client = client; + smb->pdata = pdata; + + ret = smb347_hw_init(smb); + if (ret < 0) + return ret; + + smb->mains.name = "smb347-mains"; + smb->mains.type = POWER_SUPPLY_TYPE_MAINS; + smb->mains.get_property = smb347_mains_get_property; + smb->mains.properties = smb347_mains_properties; + smb->mains.num_properties = ARRAY_SIZE(smb347_mains_properties); + smb->mains.supplied_to = battery; + smb->mains.num_supplicants = ARRAY_SIZE(battery); + + smb->usb.name = "smb347-usb"; + smb->usb.type = POWER_SUPPLY_TYPE_USB; + smb->usb.get_property = smb347_usb_get_property; + smb->usb.properties = smb347_usb_properties; + smb->usb.num_properties = ARRAY_SIZE(smb347_usb_properties); + smb->usb.supplied_to = battery; + smb->usb.num_supplicants = ARRAY_SIZE(battery); + + smb->battery.name = "smb347-battery"; + smb->battery.type = POWER_SUPPLY_TYPE_BATTERY; + smb->battery.get_property = smb347_battery_get_property; + smb->battery.properties = smb347_battery_properties; + smb->battery.num_properties = ARRAY_SIZE(smb347_battery_properties); + + ret = power_supply_register(dev, &smb->mains); + if (ret < 0) + return ret; + + ret = power_supply_register(dev, &smb->usb); + if (ret < 0) { + power_supply_unregister(&smb->mains); + return ret; + } + + ret = power_supply_register(dev, &smb->battery); + if (ret < 0) { + power_supply_unregister(&smb->usb); + power_supply_unregister(&smb->mains); + return ret; + } + + /* + * Interrupt pin is optional. If it is connected, we setup the + * interrupt support here. + */ + if (pdata->irq_gpio >= 0) { + ret = smb347_irq_init(smb); + if (ret < 0) { + dev_warn(dev, "failed to initialize IRQ: %d\n", ret); + dev_warn(dev, "disabling IRQ support\n"); + } + } + + smb->dentry = debugfs_create_file("smb347-regs", S_IRUSR, NULL, smb, + &smb347_debugfs_fops); + return 0; +} + +static int smb347_remove(struct i2c_client *client) +{ + struct smb347_charger *smb = i2c_get_clientdata(client); + + if (!IS_ERR_OR_NULL(smb->dentry)) + debugfs_remove(smb->dentry); + + if (client->irq) { + smb347_irq_disable(smb); + free_irq(client->irq, smb); + gpio_free(smb->pdata->irq_gpio); + } + + power_supply_unregister(&smb->battery); + power_supply_unregister(&smb->usb); + power_supply_unregister(&smb->mains); + return 0; +} + +static const struct i2c_device_id smb347_id[] = { + { "smb347", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, smb347_id); + +static struct i2c_driver smb347_driver = { + .driver = { + .name = "smb347", + }, + .probe = smb347_probe, + .remove = __devexit_p(smb347_remove), + .id_table = smb347_id, +}; + +static int __init smb347_init(void) +{ + return i2c_add_driver(&smb347_driver); +} +module_init(smb347_init); + +static void __exit smb347_exit(void) +{ + i2c_del_driver(&smb347_driver); +} +module_exit(smb347_exit); + +MODULE_AUTHOR("Bruce E. Robertson <bruce.e.robertson@intel.com>"); +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); +MODULE_DESCRIPTION("SMB347 battery charger driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("i2c:smb347"); diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c index 636ebb2a0e80..8c9a607ea77a 100644 --- a/drivers/power/z2_battery.c +++ b/drivers/power/z2_battery.c @@ -316,19 +316,7 @@ static struct i2c_driver z2_batt_driver = { .remove = __devexit_p(z2_batt_remove), .id_table = z2_batt_id, }; - -static int __init z2_batt_init(void) -{ - return i2c_add_driver(&z2_batt_driver); -} - -static void __exit z2_batt_exit(void) -{ - i2c_del_driver(&z2_batt_driver); -} - -module_init(z2_batt_init); -module_exit(z2_batt_exit); +module_i2c_driver(z2_batt_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Edwards <sweetlilmre@gmail.com>"); diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 17499a55113d..81fd606e47bc 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -138,9 +138,10 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev) rdesc->type = REGULATOR_VOLTAGE; rdesc->owner = THIS_MODULE; sreg->mfd = anatopmfd; - ret = of_property_read_u32(np, "reg", &sreg->control_reg); + ret = of_property_read_u32(np, "anatop-reg-offset", + &sreg->control_reg); if (ret) { - dev_err(dev, "no reg property set\n"); + dev_err(dev, "no anatop-reg-offset property set\n"); goto anatop_probe_end; } ret = of_property_read_u32(np, "anatop-vol-bit-width", @@ -213,7 +214,7 @@ static struct of_device_id __devinitdata of_anatop_regulator_match_tbl[] = { { /* end */ } }; -static struct platform_driver anatop_regulator = { +static struct platform_driver anatop_regulator_driver = { .driver = { .name = "anatop_regulator", .owner = THIS_MODULE, @@ -225,13 +226,13 @@ static struct platform_driver anatop_regulator = { static int __init anatop_regulator_init(void) { - return platform_driver_register(&anatop_regulator); + return platform_driver_register(&anatop_regulator_driver); } postcore_initcall(anatop_regulator_init); static void __exit anatop_regulator_exit(void) { - platform_driver_unregister(&anatop_regulator); + platform_driver_unregister(&anatop_regulator_driver); } module_exit(anatop_regulator_exit); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c056abd7562a..e70dd382a009 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2992,14 +2992,14 @@ void regulator_unregister(struct regulator_dev *rdev) if (rdev == NULL) return; + if (rdev->supply) + regulator_put(rdev->supply); mutex_lock(®ulator_list_mutex); debugfs_remove_recursive(rdev->debugfs); flush_work_sync(&rdev->disable_work.work); WARN_ON(rdev->open_count); unset_regulator_supplies(rdev); list_del(&rdev->list); - if (rdev->supply) - regulator_put(rdev->supply); kfree(rdev->constraints); device_unregister(&rdev->dev); mutex_unlock(®ulator_list_mutex); diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c index 30d0a15b8949..cacd33c9d042 100644 --- a/drivers/regulator/fixed-helper.c +++ b/drivers/regulator/fixed-helper.c @@ -18,7 +18,6 @@ static void regulator_fixed_release(struct device *dev) /** * regulator_register_fixed - register a no-op fixed regulator - * @name: supply name * @id: platform device id * @supplies: consumers for this regulator * @num_supplies: number of consumers @@ -32,7 +31,7 @@ struct platform_device *regulator_register_fixed(int id, if (!data) return NULL; - data->cfg.supply_name = "dummy"; + data->cfg.supply_name = "fixed-dummy"; data->cfg.microvolts = 0; data->cfg.gpio = -EINVAL; data->cfg.enabled_at_boot = 1; diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index e8cfc99dd8f0..845aa2263b8a 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -552,7 +552,7 @@ static int __devinit mc13892_regulator_probe(struct platform_device *pdev) mc13xxx_lock(mc13892); ret = mc13xxx_reg_read(mc13892, MC13892_REVISION, &val); if (ret) - goto err_free; + goto err_unlock; /* enable switch auto mode */ if ((val & 0x0000FFFF) == 0x45d0) { @@ -562,7 +562,7 @@ static int __devinit mc13892_regulator_probe(struct platform_device *pdev) MC13892_SWITCHERS4_SW1MODE_AUTO | MC13892_SWITCHERS4_SW2MODE_AUTO); if (ret) - goto err_free; + goto err_unlock; ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS5, MC13892_SWITCHERS5_SW3MODE_M | @@ -570,7 +570,7 @@ static int __devinit mc13892_regulator_probe(struct platform_device *pdev) MC13892_SWITCHERS5_SW3MODE_AUTO | MC13892_SWITCHERS5_SW4MODE_AUTO); if (ret) - goto err_free; + goto err_unlock; } mc13xxx_unlock(mc13892); @@ -612,10 +612,10 @@ static int __devinit mc13892_regulator_probe(struct platform_device *pdev) err: while (--i >= 0) regulator_unregister(priv->regulators[i]); + return ret; -err_free: +err_unlock: mc13xxx_unlock(mc13892); - return ret; } diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 58447db15de1..4ca2db059004 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -311,8 +311,7 @@ static int s5m8767_set_voltage(struct regulator_dev *rdev, struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev); const struct s5m_voltage_desc *desc; int reg_id = rdev_get_id(rdev); - int reg, mask, ret; - int i; + int sel, reg, mask, ret; u8 val; switch (reg_id) { @@ -333,19 +332,20 @@ static int s5m8767_set_voltage(struct regulator_dev *rdev, desc = reg_voltage_map[reg_id]; - i = s5m8767_convert_voltage_to_sel(desc, min_uV, max_uV); - if (i < 0) - return i; + sel = s5m8767_convert_voltage_to_sel(desc, min_uV, max_uV); + if (sel < 0) + return sel; ret = s5m8767_get_voltage_register(rdev, ®); if (ret) return ret; s5m_reg_read(s5m8767->iodev, reg, &val); - val = val & mask; + val &= ~mask; + val |= sel; ret = s5m_reg_write(s5m8767->iodev, reg, val); - *selector = i; + *selector = sel; return ret; } diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index 29b615ce3aff..cfc1f16f7771 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -79,6 +79,11 @@ static int tps6586x_ldo_list_voltage(struct regulator_dev *rdev, unsigned selector) { struct tps6586x_regulator *info = rdev_get_drvdata(rdev); + int rid = rdev_get_id(rdev); + + /* LDO0 has minimal voltage 1.2V rather than 1.25V */ + if ((rid == TPS6586X_ID_LDO_0) && (selector == 0)) + return (info->voltages[0] - 50) * 1000; return info->voltages[selector] * 1000; } diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 4904a40b0d46..ff810e787eac 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -380,13 +380,15 @@ static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev, int i; for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) { - if (max_uA <= wm831x_dcdc_ilim[i]) + if ((min_uA <= wm831x_dcdc_ilim[i]) && + (wm831x_dcdc_ilim[i] <= max_uA)) break; } if (i == ARRAY_SIZE(wm831x_dcdc_ilim)) return -EINVAL; - return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i); + return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, + i << WM831X_DC1_HC_THR_SHIFT); } static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) @@ -400,7 +402,8 @@ static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) if (val < 0) return val; - return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK]; + val = (val & WM831X_DC1_HC_THR_MASK) >> WM831X_DC1_HC_THR_SHIFT; + return wm831x_dcdc_ilim[val]; } static struct regulator_ops wm831x_buckv_ops = { diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c index 634aac3f2d5f..b414e09c5620 100644 --- a/drivers/regulator/wm831x-isink.c +++ b/drivers/regulator/wm831x-isink.c @@ -101,7 +101,7 @@ static int wm831x_isink_set_current(struct regulator_dev *rdev, for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) { int val = wm831x_isinkv_values[i]; - if (min_uA >= val && val <= max_uA) { + if (min_uA <= val && val <= max_uA) { ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ISEL_MASK, i); return ret; diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index f1e4ab0f9fda..641e9f6499d1 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -506,22 +506,19 @@ static int wm831x_aldo_set_mode(struct regulator_dev *rdev, { struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); struct wm831x *wm831x = ldo->wm831x; - int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; int ret; switch (mode) { case REGULATOR_MODE_NORMAL: - ret = wm831x_set_bits(wm831x, on_reg, - WM831X_LDO7_ON_MODE, 0); + ret = wm831x_set_bits(wm831x, on_reg, WM831X_LDO7_ON_MODE, 0); if (ret < 0) return ret; break; case REGULATOR_MODE_IDLE: - ret = wm831x_set_bits(wm831x, ctrl_reg, - WM831X_LDO7_ON_MODE, + ret = wm831x_set_bits(wm831x, on_reg, WM831X_LDO7_ON_MODE, WM831X_LDO7_ON_MODE); if (ret < 0) return ret; diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index ab1e183a74b5..05ecfb872319 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -99,7 +99,7 @@ static int get_isink_val(int min_uA, int max_uA, u16 *setting) { int i; - for (i = ARRAY_SIZE(isink_cur) - 1; i >= 0; i--) { + for (i = 0; i < ARRAY_SIZE(isink_cur); i++) { if (min_uA <= isink_cur[i] && max_uA >= isink_cur[i]) { *setting = i; return 0; @@ -186,7 +186,7 @@ static int wm8350_isink_get_current(struct regulator_dev *rdev) return 0; } - return DIV_ROUND_CLOSEST(isink_cur[val], 100); + return isink_cur[val]; } /* turn on ISINK followed by DCDC */ @@ -495,25 +495,25 @@ static int wm8350_dcdc_set_suspend_enable(struct regulator_dev *rdev) val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER) & ~WM8350_DCDC_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER, - wm8350->pmic.dcdc1_hib_mode); + val | wm8350->pmic.dcdc1_hib_mode); break; case WM8350_DCDC_3: val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER) & ~WM8350_DCDC_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER, - wm8350->pmic.dcdc3_hib_mode); + val | wm8350->pmic.dcdc3_hib_mode); break; case WM8350_DCDC_4: val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER) & ~WM8350_DCDC_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER, - wm8350->pmic.dcdc4_hib_mode); + val | wm8350->pmic.dcdc4_hib_mode); break; case WM8350_DCDC_6: val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER) & ~WM8350_DCDC_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER, - wm8350->pmic.dcdc6_hib_mode); + val | wm8350->pmic.dcdc6_hib_mode); break; case WM8350_DCDC_2: case WM8350_DCDC_5: @@ -535,25 +535,25 @@ static int wm8350_dcdc_set_suspend_disable(struct regulator_dev *rdev) val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER); wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER, - WM8350_DCDC_HIB_MODE_DIS); + val | WM8350_DCDC_HIB_MODE_DIS); break; case WM8350_DCDC_3: val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER); wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER, - WM8350_DCDC_HIB_MODE_DIS); + val | WM8350_DCDC_HIB_MODE_DIS); break; case WM8350_DCDC_4: val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER); wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER, - WM8350_DCDC_HIB_MODE_DIS); + val | WM8350_DCDC_HIB_MODE_DIS); break; case WM8350_DCDC_6: val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER); wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER, - WM8350_DCDC_HIB_MODE_DIS); + val | WM8350_DCDC_HIB_MODE_DIS); break; case WM8350_DCDC_2: case WM8350_DCDC_5: @@ -575,13 +575,13 @@ static int wm8350_dcdc25_set_suspend_enable(struct regulator_dev *rdev) val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) & ~WM8350_DC2_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | - WM8350_DC2_HIB_MODE_ACTIVE); + (WM8350_DC2_HIB_MODE_ACTIVE << WM8350_DC2_HIB_MODE_SHIFT)); break; case WM8350_DCDC_5: val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) - & ~WM8350_DC2_HIB_MODE_MASK; + & ~WM8350_DC5_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | - WM8350_DC5_HIB_MODE_ACTIVE); + (WM8350_DC5_HIB_MODE_ACTIVE << WM8350_DC5_HIB_MODE_SHIFT)); break; default: return -EINVAL; @@ -600,13 +600,13 @@ static int wm8350_dcdc25_set_suspend_disable(struct regulator_dev *rdev) val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) & ~WM8350_DC2_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | - WM8350_DC2_HIB_MODE_DISABLE); + (WM8350_DC2_HIB_MODE_DISABLE << WM8350_DC2_HIB_MODE_SHIFT)); break; case WM8350_DCDC_5: val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) - & ~WM8350_DC2_HIB_MODE_MASK; + & ~WM8350_DC5_HIB_MODE_MASK; wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | - WM8350_DC2_HIB_MODE_DISABLE); + (WM8350_DC5_HIB_MODE_DISABLE << WM8350_DC5_HIB_MODE_SHIFT)); break; default: return -EINVAL; @@ -749,7 +749,7 @@ static int wm8350_ldo_set_suspend_disable(struct regulator_dev *rdev) /* all LDOs have same mV bits */ val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK; - wm8350_reg_write(wm8350, volt_reg, WM8350_LDO1_HIB_MODE_DIS); + wm8350_reg_write(wm8350, volt_reg, val | WM8350_LDO1_HIB_MODE_DIS); return 0; } diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c index 70277a530133..85d31a69e117 100644 --- a/drivers/remoteproc/remoteproc_debugfs.c +++ b/drivers/remoteproc/remoteproc_debugfs.c @@ -50,16 +50,9 @@ static ssize_t rproc_trace_read(struct file *filp, char __user *userbuf, return simple_read_from_buffer(userbuf, count, ppos, trace->va, len); } -static int rproc_open_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - - return 0; -} - static const struct file_operations trace_rproc_ops = { .read = rproc_trace_read, - .open = rproc_open_generic, + .open = simple_open, .llseek = generic_file_llseek, }; @@ -94,7 +87,7 @@ static ssize_t rproc_state_read(struct file *filp, char __user *userbuf, static const struct file_operations rproc_state_ops = { .read = rproc_state_read, - .open = rproc_open_generic, + .open = simple_open, .llseek = generic_file_llseek, }; @@ -114,7 +107,7 @@ static ssize_t rproc_name_read(struct file *filp, char __user *userbuf, static const struct file_operations rproc_name_ops = { .read = rproc_name_read, - .open = rproc_open_generic, + .open = simple_open, .llseek = generic_file_llseek, }; diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c index afee0e8ae714..feddefc42109 100644 --- a/drivers/rtc/rtc-88pm860x.c +++ b/drivers/rtc/rtc-88pm860x.c @@ -72,9 +72,9 @@ static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) struct pm860x_rtc_info *info = dev_get_drvdata(dev); if (enabled) - pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM, ALARM); + pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, ALARM_EN); else - pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM, 0); + pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0); return 0; } diff --git a/drivers/rtc/rtc-efi.c b/drivers/rtc/rtc-efi.c index 550292304b0f..c9f890b088da 100644 --- a/drivers/rtc/rtc-efi.c +++ b/drivers/rtc/rtc-efi.c @@ -213,7 +213,6 @@ static struct platform_driver efi_rtc_driver = { .name = "rtc-efi", .owner = THIS_MODULE, }, - .probe = efi_rtc_probe, .remove = __exit_p(efi_rtc_remove), }; diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 692de7360e94..684ef4bbfce4 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -339,8 +339,7 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision); /* Enable the clockwatch on ST Variants */ - if ((ldata->hw_designer == AMBA_VENDOR_ST) && - (ldata->hw_revision > 1)) + if (ldata->hw_designer == AMBA_VENDOR_ST) writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN, ldata->base + RTC_CR); diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c index 7f8e6c247935..33b6ba0afa0d 100644 --- a/drivers/rtc/rtc-r9701.c +++ b/drivers/rtc/rtc-r9701.c @@ -122,6 +122,7 @@ static const struct rtc_class_ops r9701_rtc_ops = { static int __devinit r9701_probe(struct spi_device *spi) { struct rtc_device *rtc; + struct rtc_time dt; unsigned char tmp; int res; @@ -132,6 +133,27 @@ static int __devinit r9701_probe(struct spi_device *spi) return -ENODEV; } + /* + * The device seems to be present. Now check if the registers + * contain invalid values. If so, try to write a default date: + * 2000/1/1 00:00:00 + */ + r9701_get_datetime(&spi->dev, &dt); + if (rtc_valid_tm(&dt)) { + dev_info(&spi->dev, "trying to repair invalid date/time\n"); + dt.tm_sec = 0; + dt.tm_min = 0; + dt.tm_hour = 0; + dt.tm_mday = 1; + dt.tm_mon = 0; + dt.tm_year = 100; + + if (r9701_set_datetime(&spi->dev, &dt)) { + dev_err(&spi->dev, "cannot repair RTC register\n"); + return -ENODEV; + } + } + rtc = rtc_device_register("r9701", &spi->dev, &r9701_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 9ccea134a996..3f3a29752369 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -40,6 +40,10 @@ enum s3c_cpu_type { TYPE_S3C64XX, }; +struct s3c_rtc_drv_data { + int cpu_type; +}; + /* I have yet to find an S3C implementation with more than one * of these rtc blocks in */ @@ -446,10 +450,12 @@ static const struct of_device_id s3c_rtc_dt_match[]; static inline int s3c_rtc_get_driver_data(struct platform_device *pdev) { #ifdef CONFIG_OF + struct s3c_rtc_drv_data *data; if (pdev->dev.of_node) { const struct of_device_id *match; match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node); - return match->data; + data = (struct s3c_rtc_drv_data *) match->data; + return data->cpu_type; } #endif return platform_get_device_id(pdev)->driver_data; @@ -664,20 +670,27 @@ static int s3c_rtc_resume(struct platform_device *pdev) #define s3c_rtc_resume NULL #endif +static struct s3c_rtc_drv_data s3c_rtc_drv_data_array[] = { + [TYPE_S3C2410] = { TYPE_S3C2410 }, + [TYPE_S3C2416] = { TYPE_S3C2416 }, + [TYPE_S3C2443] = { TYPE_S3C2443 }, + [TYPE_S3C64XX] = { TYPE_S3C64XX }, +}; + #ifdef CONFIG_OF static const struct of_device_id s3c_rtc_dt_match[] = { { - .compatible = "samsung,s3c2410-rtc" - .data = TYPE_S3C2410, + .compatible = "samsung,s3c2410-rtc", + .data = &s3c_rtc_drv_data_array[TYPE_S3C2410], }, { - .compatible = "samsung,s3c2416-rtc" - .data = TYPE_S3C2416, + .compatible = "samsung,s3c2416-rtc", + .data = &s3c_rtc_drv_data_array[TYPE_S3C2416], }, { - .compatible = "samsung,s3c2443-rtc" - .data = TYPE_S3C2443, + .compatible = "samsung,s3c2443-rtc", + .data = &s3c_rtc_drv_data_array[TYPE_S3C2443], }, { - .compatible = "samsung,s3c6410-rtc" - .data = TYPE_S3C64XX, + .compatible = "samsung,s3c6410-rtc", + .data = &s3c_rtc_drv_data_array[TYPE_S3C64XX], }, {}, }; diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 4c2c6df2a9ef..258abeabf624 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -112,6 +112,7 @@ static const u8 twl6030_rtc_reg_map[] = { #define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 #define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 +#define BIT_RTC_CTRL_REG_RTC_V_OPT 0x80 /* RTC_STATUS_REG bitfields */ #define BIT_RTC_STATUS_REG_RUN_M 0x02 @@ -235,25 +236,57 @@ static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm) unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; u8 save_control; + u8 rtc_control; ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); - if (ret < 0) + if (ret < 0) { + dev_err(dev, "%s: reading CTRL_REG, error %d\n", __func__, ret); return ret; + } + /* for twl6030/32 make sure BIT_RTC_CTRL_REG_GET_TIME_M is clear */ + if (twl_class_is_6030()) { + if (save_control & BIT_RTC_CTRL_REG_GET_TIME_M) { + save_control &= ~BIT_RTC_CTRL_REG_GET_TIME_M; + ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) { + dev_err(dev, "%s clr GET_TIME, error %d\n", + __func__, ret); + return ret; + } + } + } - save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; + /* Copy RTC counting registers to static registers or latches */ + rtc_control = save_control | BIT_RTC_CTRL_REG_GET_TIME_M; - ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); - if (ret < 0) + /* for twl6030/32 enable read access to static shadowed registers */ + if (twl_class_is_6030()) + rtc_control |= BIT_RTC_CTRL_REG_RTC_V_OPT; + + ret = twl_rtc_write_u8(rtc_control, REG_RTC_CTRL_REG); + if (ret < 0) { + dev_err(dev, "%s: writing CTRL_REG, error %d\n", __func__, ret); return ret; + } ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data, (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS); if (ret < 0) { - dev_err(dev, "rtc_read_time error %d\n", ret); + dev_err(dev, "%s: reading data, error %d\n", __func__, ret); return ret; } + /* for twl6030 restore original state of rtc control register */ + if (twl_class_is_6030()) { + ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) { + dev_err(dev, "%s: restore CTRL_REG, error %d\n", + __func__, ret); + return ret; + } + } + tm->tm_sec = bcd2bin(rtc_data[0]); tm->tm_min = bcd2bin(rtc_data[1]); tm->tm_hour = bcd2bin(rtc_data[2]); diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index a06e608789e3..29684c8142b0 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -619,6 +619,7 @@ config SCSI_ARCMSR source "drivers/scsi/megaraid/Kconfig.megaraid" source "drivers/scsi/mpt2sas/Kconfig" +source "drivers/scsi/ufs/Kconfig" config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index ad24e065b1e5..8deedeaf5608 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -108,6 +108,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/ +obj-$(CONFIG_SCSI_UFSHCD) += ufs/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o obj-$(CONFIG_SCSI_GDTH) += gdth.o diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 7d48700257a7..9328121804bb 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -341,10 +341,10 @@ MODULE_PARM_DESC(aic79xx, " (0/256ms,1/128ms,2/64ms,3/32ms)\n" " slowcrc Turn on the SLOWCRC bit (Rev B only)\n" "\n" -" Sample /etc/modprobe.conf line:\n" -" Enable verbose logging\n" -" Set tag depth on Controller 2/Target 2 to 10 tags\n" -" Shorten the selection timeout to 128ms\n" +" Sample modprobe configuration file:\n" +" # Enable verbose logging\n" +" # Set tag depth on Controller 2/Target 2 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" "\n" " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n" ); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index c6251bb4f438..5a477cdc780d 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -360,10 +360,10 @@ MODULE_PARM_DESC(aic7xxx, " seltime:<int> Selection Timeout\n" " (0/256ms,1/128ms,2/64ms,3/32ms)\n" "\n" -" Sample /etc/modprobe.conf line:\n" -" Toggle EISA/VLB probing\n" -" Set tag depth on Controller 1/Target 1 to 10 tags\n" -" Shorten the selection timeout to 128ms\n" +" Sample modprobe configuration file:\n" +" # Toggle EISA/VLB probing\n" +" # Set tag depth on Controller 1/Target 1 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" "\n" " options aic7xxx 'aic7xxx=probe_eisa_vl.tag_info:{{}.{.10}}.seltime:1'\n" ); diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index f29d5121d5ed..68ce08552f69 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -2582,7 +2582,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * this than via the PCI device table */ if (ent->device == PCI_DEVICE_ID_ARTOP_AEC7610) { - error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver); + atpdev->chip_ver = pdev->revision; if (atpdev->chip_ver < 2) goto err_eio; } @@ -2601,7 +2601,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent) base_io &= 0xfffffff8; if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) { - error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver); + atpdev->chip_ver = pdev->revision; pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803 host_id = inb(base_io + 0x39); diff --git a/drivers/scsi/bfa/bfa.h b/drivers/scsi/bfa/bfa.h index a796de935054..4ad7e368bbc2 100644 --- a/drivers/scsi/bfa/bfa.h +++ b/drivers/scsi/bfa/bfa.h @@ -225,9 +225,9 @@ struct bfa_faa_args_s { }; struct bfa_iocfc_s { + bfa_fsm_t fsm; struct bfa_s *bfa; struct bfa_iocfc_cfg_s cfg; - int action; u32 req_cq_pi[BFI_IOC_MAX_CQS]; u32 rsp_cq_ci[BFI_IOC_MAX_CQS]; u8 hw_qid[BFI_IOC_MAX_CQS]; @@ -236,7 +236,9 @@ struct bfa_iocfc_s { struct bfa_cb_qe_s dis_hcb_qe; struct bfa_cb_qe_s en_hcb_qe; struct bfa_cb_qe_s stats_hcb_qe; - bfa_boolean_t cfgdone; + bfa_boolean_t submod_enabled; + bfa_boolean_t cb_reqd; /* Driver call back reqd */ + bfa_status_t op_status; /* Status of bfa iocfc op */ struct bfa_dma_s cfg_info; struct bfi_iocfc_cfg_s *cfginfo; @@ -341,8 +343,6 @@ void bfa_hwct_msix_getvecs(struct bfa_s *bfa, u32 *vecmap, u32 *nvecs, void bfa_hwct_msix_get_rme_range(struct bfa_s *bfa, u32 *start, u32 *end); void bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t *wwns); -wwn_t bfa_iocfc_get_pwwn(struct bfa_s *bfa); -wwn_t bfa_iocfc_get_nwwn(struct bfa_s *bfa); int bfa_iocfc_get_pbc_vports(struct bfa_s *bfa, struct bfi_pbc_vport_s *pbc_vport); @@ -428,7 +428,6 @@ bfa_status_t bfa_iocfc_israttr_set(struct bfa_s *bfa, void bfa_iocfc_enable(struct bfa_s *bfa); void bfa_iocfc_disable(struct bfa_s *bfa); -void bfa_iocfc_cb_dconf_modinit(struct bfa_s *bfa, bfa_status_t status); #define bfa_timer_start(_bfa, _timer, _timercb, _arg, _timeout) \ bfa_timer_begin(&(_bfa)->timer_mod, _timer, _timercb, _arg, _timeout) diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c index 4bd546bcc240..456e5762977d 100644 --- a/drivers/scsi/bfa/bfa_core.c +++ b/drivers/scsi/bfa/bfa_core.c @@ -200,13 +200,431 @@ enum { #define DEF_CFG_NUM_SBOOT_LUNS 16 /* + * IOCFC state machine definitions/declarations + */ +bfa_fsm_state_decl(bfa_iocfc, stopped, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, initing, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, dconf_read, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, init_cfg_wait, + struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, init_cfg_done, + struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, operational, + struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, dconf_write, + struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, stopping, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, enabling, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, cfg_wait, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, disabling, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, disabled, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, failed, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, init_failed, + struct bfa_iocfc_s, enum iocfc_event); + +/* * forward declaration for IOC FC functions */ +static void bfa_iocfc_start_submod(struct bfa_s *bfa); +static void bfa_iocfc_disable_submod(struct bfa_s *bfa); +static void bfa_iocfc_send_cfg(void *bfa_arg); static void bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status); static void bfa_iocfc_disable_cbfn(void *bfa_arg); static void bfa_iocfc_hbfail_cbfn(void *bfa_arg); static void bfa_iocfc_reset_cbfn(void *bfa_arg); static struct bfa_ioc_cbfn_s bfa_iocfc_cbfn; +static void bfa_iocfc_init_cb(void *bfa_arg, bfa_boolean_t complete); +static void bfa_iocfc_stop_cb(void *bfa_arg, bfa_boolean_t compl); +static void bfa_iocfc_enable_cb(void *bfa_arg, bfa_boolean_t compl); +static void bfa_iocfc_disable_cb(void *bfa_arg, bfa_boolean_t compl); + +static void +bfa_iocfc_sm_stopped_entry(struct bfa_iocfc_s *iocfc) +{ +} + +static void +bfa_iocfc_sm_stopped(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_INIT: + case IOCFC_E_ENABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_initing); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_initing_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_ioc_enable(&iocfc->bfa->ioc); +} + +static void +bfa_iocfc_sm_initing(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_IOC_ENABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_read); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_dconf_read_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_dconf_modinit(iocfc->bfa); +} + +static void +bfa_iocfc_sm_dconf_read(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_DCONF_DONE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_cfg_wait); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_init_cfg_wait_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_iocfc_send_cfg(iocfc->bfa); +} + +static void +bfa_iocfc_sm_init_cfg_wait(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_CFG_DONE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_cfg_done); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_init_cfg_done_entry(struct bfa_iocfc_s *iocfc) +{ + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.init_hcb_qe, + bfa_iocfc_init_cb, iocfc->bfa); +} + +static void +bfa_iocfc_sm_init_cfg_done(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_START: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_operational); + break; + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping); + break; + case IOCFC_E_DISABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_operational_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_fcport_init(iocfc->bfa); + bfa_iocfc_start_submod(iocfc->bfa); +} + +static void +bfa_iocfc_sm_operational(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write); + break; + case IOCFC_E_DISABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_dconf_write_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_dconf_modexit(iocfc->bfa); +} + +static void +bfa_iocfc_sm_dconf_write(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_DCONF_DONE: + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_stopping_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_ioc_disable(&iocfc->bfa->ioc); +} + +static void +bfa_iocfc_sm_stopping(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_IOC_DISABLED: + bfa_isr_disable(iocfc->bfa); + bfa_iocfc_disable_submod(iocfc->bfa); + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopped); + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.stop_hcb_qe, + bfa_iocfc_stop_cb, iocfc->bfa); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_enabling_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_ioc_enable(&iocfc->bfa->ioc); +} + +static void +bfa_iocfc_sm_enabling(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_IOC_ENABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_cfg_wait); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed); + + if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE) + break; + + iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe, + bfa_iocfc_enable_cb, iocfc->bfa); + iocfc->bfa->iocfc.cb_reqd = BFA_FALSE; + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_cfg_wait_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_iocfc_send_cfg(iocfc->bfa); +} + +static void +bfa_iocfc_sm_cfg_wait(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_CFG_DONE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_operational); + if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE) + break; + + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe, + bfa_iocfc_enable_cb, iocfc->bfa); + iocfc->bfa->iocfc.cb_reqd = BFA_FALSE; + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed); + if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE) + break; + + iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe, + bfa_iocfc_enable_cb, iocfc->bfa); + iocfc->bfa->iocfc.cb_reqd = BFA_FALSE; + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_disabling_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_ioc_disable(&iocfc->bfa->ioc); +} + +static void +bfa_iocfc_sm_disabling(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_IOC_DISABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabled); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_disabled_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_isr_disable(iocfc->bfa); + bfa_iocfc_disable_submod(iocfc->bfa); + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.dis_hcb_qe, + bfa_iocfc_disable_cb, iocfc->bfa); +} + +static void +bfa_iocfc_sm_disabled(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write); + break; + case IOCFC_E_ENABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_enabling); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_failed_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_isr_disable(iocfc->bfa); + bfa_iocfc_disable_submod(iocfc->bfa); +} + +static void +bfa_iocfc_sm_failed(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write); + break; + case IOCFC_E_DISABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling); + break; + case IOCFC_E_IOC_ENABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_cfg_wait); + break; + case IOCFC_E_IOC_FAILED: + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_init_failed_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_isr_disable(iocfc->bfa); + iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.init_hcb_qe, + bfa_iocfc_init_cb, iocfc->bfa); +} + +static void +bfa_iocfc_sm_init_failed(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping); + break; + case IOCFC_E_DISABLE: + bfa_ioc_disable(&iocfc->bfa->ioc); + break; + case IOCFC_E_IOC_ENABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_read); + break; + case IOCFC_E_IOC_DISABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopped); + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.dis_hcb_qe, + bfa_iocfc_disable_cb, iocfc->bfa); + break; + case IOCFC_E_IOC_FAILED: + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} /* * BFA Interrupt handling functions @@ -231,16 +649,19 @@ bfa_reqq_resume(struct bfa_s *bfa, int qid) } } -static inline void +bfa_boolean_t bfa_isr_rspq(struct bfa_s *bfa, int qid) { struct bfi_msg_s *m; u32 pi, ci; struct list_head *waitq; + bfa_boolean_t ret; ci = bfa_rspq_ci(bfa, qid); pi = bfa_rspq_pi(bfa, qid); + ret = (ci != pi); + while (ci != pi) { m = bfa_rspq_elem(bfa, qid, ci); WARN_ON(m->mhdr.msg_class >= BFI_MC_MAX); @@ -260,6 +681,8 @@ bfa_isr_rspq(struct bfa_s *bfa, int qid) waitq = bfa_reqq(bfa, qid); if (!list_empty(waitq)) bfa_reqq_resume(bfa, qid); + + return ret; } static inline void @@ -320,6 +743,7 @@ bfa_intx(struct bfa_s *bfa) { u32 intr, qintr; int queue; + bfa_boolean_t rspq_comp = BFA_FALSE; intr = readl(bfa->iocfc.bfa_regs.intr_status); @@ -332,11 +756,12 @@ bfa_intx(struct bfa_s *bfa) */ if (bfa->queue_process) { for (queue = 0; queue < BFI_IOC_MAX_CQS; queue++) - bfa_isr_rspq(bfa, queue); + if (bfa_isr_rspq(bfa, queue)) + rspq_comp = BFA_TRUE; } if (!intr) - return BFA_TRUE; + return (qintr | rspq_comp) ? BFA_TRUE : BFA_FALSE; /* * CPE completion queue interrupt @@ -525,11 +950,9 @@ bfa_iocfc_send_cfg(void *bfa_arg) * Enable interrupt coalescing if it is driver init path * and not ioc disable/enable path. */ - if (!iocfc->cfgdone) + if (bfa_fsm_cmp_state(iocfc, bfa_iocfc_sm_init_cfg_wait)) cfg_info->intr_attr.coalesce = BFA_TRUE; - iocfc->cfgdone = BFA_FALSE; - /* * dma map IOC configuration itself */ @@ -549,8 +972,6 @@ bfa_iocfc_init_mem(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, bfa->bfad = bfad; iocfc->bfa = bfa; - iocfc->action = BFA_IOCFC_ACT_NONE; - iocfc->cfg = *cfg; /* @@ -683,6 +1104,8 @@ bfa_iocfc_start_submod(struct bfa_s *bfa) for (i = 0; hal_mods[i]; i++) hal_mods[i]->start(bfa); + + bfa->iocfc.submod_enabled = BFA_TRUE; } /* @@ -693,8 +1116,13 @@ bfa_iocfc_disable_submod(struct bfa_s *bfa) { int i; + if (bfa->iocfc.submod_enabled == BFA_FALSE) + return; + for (i = 0; hal_mods[i]; i++) hal_mods[i]->iocdisable(bfa); + + bfa->iocfc.submod_enabled = BFA_FALSE; } static void @@ -702,15 +1130,8 @@ bfa_iocfc_init_cb(void *bfa_arg, bfa_boolean_t complete) { struct bfa_s *bfa = bfa_arg; - if (complete) { - if (bfa->iocfc.cfgdone && BFA_DCONF_MOD(bfa)->flashdone) - bfa_cb_init(bfa->bfad, BFA_STATUS_OK); - else - bfa_cb_init(bfa->bfad, BFA_STATUS_FAILED); - } else { - if (bfa->iocfc.cfgdone) - bfa->iocfc.action = BFA_IOCFC_ACT_NONE; - } + if (complete) + bfa_cb_init(bfa->bfad, bfa->iocfc.op_status); } static void @@ -721,8 +1142,6 @@ bfa_iocfc_stop_cb(void *bfa_arg, bfa_boolean_t compl) if (compl) complete(&bfad->comp); - else - bfa->iocfc.action = BFA_IOCFC_ACT_NONE; } static void @@ -794,8 +1213,6 @@ bfa_iocfc_cfgrsp(struct bfa_s *bfa) fwcfg->num_uf_bufs = be16_to_cpu(fwcfg->num_uf_bufs); fwcfg->num_rports = be16_to_cpu(fwcfg->num_rports); - iocfc->cfgdone = BFA_TRUE; - /* * configure queue register offsets as learnt from firmware */ @@ -811,22 +1228,13 @@ bfa_iocfc_cfgrsp(struct bfa_s *bfa) */ bfa_msix_queue_install(bfa); - /* - * Configuration is complete - initialize/start submodules - */ - bfa_fcport_init(bfa); - - if (iocfc->action == BFA_IOCFC_ACT_INIT) { - if (BFA_DCONF_MOD(bfa)->flashdone == BFA_TRUE) - bfa_cb_queue(bfa, &iocfc->init_hcb_qe, - bfa_iocfc_init_cb, bfa); - } else { - if (bfa->iocfc.action == BFA_IOCFC_ACT_ENABLE) - bfa_cb_queue(bfa, &bfa->iocfc.en_hcb_qe, - bfa_iocfc_enable_cb, bfa); - bfa_iocfc_start_submod(bfa); + if (bfa->iocfc.cfgrsp->pbc_cfg.pbc_pwwn != 0) { + bfa->ioc.attr->pwwn = bfa->iocfc.cfgrsp->pbc_cfg.pbc_pwwn; + bfa->ioc.attr->nwwn = bfa->iocfc.cfgrsp->pbc_cfg.pbc_nwwn; + bfa_fsm_send_event(iocfc, IOCFC_E_CFG_DONE); } } + void bfa_iocfc_reset_queues(struct bfa_s *bfa) { @@ -840,6 +1248,23 @@ bfa_iocfc_reset_queues(struct bfa_s *bfa) } } +/* + * Process FAA pwwn msg from fw. + */ +static void +bfa_iocfc_process_faa_addr(struct bfa_s *bfa, struct bfi_faa_addr_msg_s *msg) +{ + struct bfa_iocfc_s *iocfc = &bfa->iocfc; + struct bfi_iocfc_cfgrsp_s *cfgrsp = iocfc->cfgrsp; + + cfgrsp->pbc_cfg.pbc_pwwn = msg->pwwn; + cfgrsp->pbc_cfg.pbc_nwwn = msg->nwwn; + + bfa->ioc.attr->pwwn = msg->pwwn; + bfa->ioc.attr->nwwn = msg->nwwn; + bfa_fsm_send_event(iocfc, IOCFC_E_CFG_DONE); +} + /* Fabric Assigned Address specific functions */ /* @@ -855,84 +1280,13 @@ bfa_faa_validate_request(struct bfa_s *bfa) if ((ioc_type != BFA_IOC_TYPE_FC) || bfa_mfg_is_mezz(card_type)) return BFA_STATUS_FEATURE_NOT_SUPPORTED; } else { - if (!bfa_ioc_is_acq_addr(&bfa->ioc)) - return BFA_STATUS_IOC_NON_OP; + return BFA_STATUS_IOC_NON_OP; } return BFA_STATUS_OK; } bfa_status_t -bfa_faa_enable(struct bfa_s *bfa, bfa_cb_iocfc_t cbfn, void *cbarg) -{ - struct bfi_faa_en_dis_s faa_enable_req; - struct bfa_iocfc_s *iocfc = &bfa->iocfc; - bfa_status_t status; - - iocfc->faa_args.faa_cb.faa_cbfn = cbfn; - iocfc->faa_args.faa_cb.faa_cbarg = cbarg; - - status = bfa_faa_validate_request(bfa); - if (status != BFA_STATUS_OK) - return status; - - if (iocfc->faa_args.busy == BFA_TRUE) - return BFA_STATUS_DEVBUSY; - - if (iocfc->faa_args.faa_state == BFA_FAA_ENABLED) - return BFA_STATUS_FAA_ENABLED; - - if (bfa_fcport_is_trunk_enabled(bfa)) - return BFA_STATUS_ERROR_TRUNK_ENABLED; - - bfa_fcport_cfg_faa(bfa, BFA_FAA_ENABLED); - iocfc->faa_args.busy = BFA_TRUE; - - memset(&faa_enable_req, 0, sizeof(struct bfi_faa_en_dis_s)); - bfi_h2i_set(faa_enable_req.mh, BFI_MC_IOCFC, - BFI_IOCFC_H2I_FAA_ENABLE_REQ, bfa_fn_lpu(bfa)); - - bfa_ioc_mbox_send(&bfa->ioc, &faa_enable_req, - sizeof(struct bfi_faa_en_dis_s)); - - return BFA_STATUS_OK; -} - -bfa_status_t -bfa_faa_disable(struct bfa_s *bfa, bfa_cb_iocfc_t cbfn, - void *cbarg) -{ - struct bfi_faa_en_dis_s faa_disable_req; - struct bfa_iocfc_s *iocfc = &bfa->iocfc; - bfa_status_t status; - - iocfc->faa_args.faa_cb.faa_cbfn = cbfn; - iocfc->faa_args.faa_cb.faa_cbarg = cbarg; - - status = bfa_faa_validate_request(bfa); - if (status != BFA_STATUS_OK) - return status; - - if (iocfc->faa_args.busy == BFA_TRUE) - return BFA_STATUS_DEVBUSY; - - if (iocfc->faa_args.faa_state == BFA_FAA_DISABLED) - return BFA_STATUS_FAA_DISABLED; - - bfa_fcport_cfg_faa(bfa, BFA_FAA_DISABLED); - iocfc->faa_args.busy = BFA_TRUE; - - memset(&faa_disable_req, 0, sizeof(struct bfi_faa_en_dis_s)); - bfi_h2i_set(faa_disable_req.mh, BFI_MC_IOCFC, - BFI_IOCFC_H2I_FAA_DISABLE_REQ, bfa_fn_lpu(bfa)); - - bfa_ioc_mbox_send(&bfa->ioc, &faa_disable_req, - sizeof(struct bfi_faa_en_dis_s)); - - return BFA_STATUS_OK; -} - -bfa_status_t bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr, bfa_cb_iocfc_t cbfn, void *cbarg) { @@ -963,38 +1317,6 @@ bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr, } /* - * FAA enable response - */ -static void -bfa_faa_enable_reply(struct bfa_iocfc_s *iocfc, - struct bfi_faa_en_dis_rsp_s *rsp) -{ - void *cbarg = iocfc->faa_args.faa_cb.faa_cbarg; - bfa_status_t status = rsp->status; - - WARN_ON(!iocfc->faa_args.faa_cb.faa_cbfn); - - iocfc->faa_args.faa_cb.faa_cbfn(cbarg, status); - iocfc->faa_args.busy = BFA_FALSE; -} - -/* - * FAA disable response - */ -static void -bfa_faa_disable_reply(struct bfa_iocfc_s *iocfc, - struct bfi_faa_en_dis_rsp_s *rsp) -{ - void *cbarg = iocfc->faa_args.faa_cb.faa_cbarg; - bfa_status_t status = rsp->status; - - WARN_ON(!iocfc->faa_args.faa_cb.faa_cbfn); - - iocfc->faa_args.faa_cb.faa_cbfn(cbarg, status); - iocfc->faa_args.busy = BFA_FALSE; -} - -/* * FAA query response */ static void @@ -1023,25 +1345,10 @@ bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status) { struct bfa_s *bfa = bfa_arg; - if (status == BFA_STATUS_FAA_ACQ_ADDR) { - bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, - bfa_iocfc_init_cb, bfa); - return; - } - - if (status != BFA_STATUS_OK) { - bfa_isr_disable(bfa); - if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT) - bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, - bfa_iocfc_init_cb, bfa); - else if (bfa->iocfc.action == BFA_IOCFC_ACT_ENABLE) - bfa_cb_queue(bfa, &bfa->iocfc.en_hcb_qe, - bfa_iocfc_enable_cb, bfa); - return; - } - - bfa_iocfc_send_cfg(bfa); - bfa_dconf_modinit(bfa); + if (status == BFA_STATUS_OK) + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_ENABLED); + else + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_FAILED); } /* @@ -1052,17 +1359,7 @@ bfa_iocfc_disable_cbfn(void *bfa_arg) { struct bfa_s *bfa = bfa_arg; - bfa_isr_disable(bfa); - bfa_iocfc_disable_submod(bfa); - - if (bfa->iocfc.action == BFA_IOCFC_ACT_STOP) - bfa_cb_queue(bfa, &bfa->iocfc.stop_hcb_qe, bfa_iocfc_stop_cb, - bfa); - else { - WARN_ON(bfa->iocfc.action != BFA_IOCFC_ACT_DISABLE); - bfa_cb_queue(bfa, &bfa->iocfc.dis_hcb_qe, bfa_iocfc_disable_cb, - bfa); - } + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_DISABLED); } /* @@ -1074,13 +1371,7 @@ bfa_iocfc_hbfail_cbfn(void *bfa_arg) struct bfa_s *bfa = bfa_arg; bfa->queue_process = BFA_FALSE; - - bfa_isr_disable(bfa); - bfa_iocfc_disable_submod(bfa); - - if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT) - bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, bfa_iocfc_init_cb, - bfa); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_FAILED); } /* @@ -1095,7 +1386,6 @@ bfa_iocfc_reset_cbfn(void *bfa_arg) bfa_isr_enable(bfa); } - /* * Query IOC memory requirement information. */ @@ -1171,6 +1461,12 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, INIT_LIST_HEAD(&bfa->comp_q); for (i = 0; i < BFI_IOC_MAX_CQS; i++) INIT_LIST_HEAD(&bfa->reqq_waitq[i]); + + bfa->iocfc.cb_reqd = BFA_FALSE; + bfa->iocfc.op_status = BFA_STATUS_OK; + bfa->iocfc.submod_enabled = BFA_FALSE; + + bfa_fsm_set_state(&bfa->iocfc, bfa_iocfc_sm_stopped); } /* @@ -1179,8 +1475,7 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, void bfa_iocfc_init(struct bfa_s *bfa) { - bfa->iocfc.action = BFA_IOCFC_ACT_INIT; - bfa_ioc_enable(&bfa->ioc); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_INIT); } /* @@ -1190,8 +1485,7 @@ bfa_iocfc_init(struct bfa_s *bfa) void bfa_iocfc_start(struct bfa_s *bfa) { - if (bfa->iocfc.cfgdone) - bfa_iocfc_start_submod(bfa); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_START); } /* @@ -1201,12 +1495,8 @@ bfa_iocfc_start(struct bfa_s *bfa) void bfa_iocfc_stop(struct bfa_s *bfa) { - bfa->iocfc.action = BFA_IOCFC_ACT_STOP; - bfa->queue_process = BFA_FALSE; - bfa_dconf_modexit(bfa); - if (BFA_DCONF_MOD(bfa)->flashdone == BFA_TRUE) - bfa_ioc_disable(&bfa->ioc); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_STOP); } void @@ -1226,13 +1516,9 @@ bfa_iocfc_isr(void *bfaarg, struct bfi_mbmsg_s *m) case BFI_IOCFC_I2H_UPDATEQ_RSP: iocfc->updateq_cbfn(iocfc->updateq_cbarg, BFA_STATUS_OK); break; - case BFI_IOCFC_I2H_FAA_ENABLE_RSP: - bfa_faa_enable_reply(iocfc, - (struct bfi_faa_en_dis_rsp_s *)msg); - break; - case BFI_IOCFC_I2H_FAA_DISABLE_RSP: - bfa_faa_disable_reply(iocfc, - (struct bfi_faa_en_dis_rsp_s *)msg); + case BFI_IOCFC_I2H_ADDR_MSG: + bfa_iocfc_process_faa_addr(bfa, + (struct bfi_faa_addr_msg_s *)msg); break; case BFI_IOCFC_I2H_FAA_QUERY_RSP: bfa_faa_query_reply(iocfc, (bfi_faa_query_rsp_t *)msg); @@ -1306,8 +1592,8 @@ bfa_iocfc_enable(struct bfa_s *bfa) { bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0, "IOC Enable"); - bfa->iocfc.action = BFA_IOCFC_ACT_ENABLE; - bfa_ioc_enable(&bfa->ioc); + bfa->iocfc.cb_reqd = BFA_TRUE; + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_ENABLE); } void @@ -1315,17 +1601,16 @@ bfa_iocfc_disable(struct bfa_s *bfa) { bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0, "IOC Disable"); - bfa->iocfc.action = BFA_IOCFC_ACT_DISABLE; bfa->queue_process = BFA_FALSE; - bfa_ioc_disable(&bfa->ioc); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_DISABLE); } - bfa_boolean_t bfa_iocfc_is_operational(struct bfa_s *bfa) { - return bfa_ioc_is_operational(&bfa->ioc) && bfa->iocfc.cfgdone; + return bfa_ioc_is_operational(&bfa->ioc) && + bfa_fsm_cmp_state(&bfa->iocfc, bfa_iocfc_sm_operational); } /* @@ -1567,16 +1852,6 @@ bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q) } } -void -bfa_iocfc_cb_dconf_modinit(struct bfa_s *bfa, bfa_status_t status) -{ - if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT) { - if (bfa->iocfc.cfgdone == BFA_TRUE) - bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, - bfa_iocfc_init_cb, bfa); - } -} - /* * Return the list of PCI vendor/device id lists supported by this * BFA instance. diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h index cb07c628b2f1..36756ce0e58f 100644 --- a/drivers/scsi/bfa/bfa_defs_svc.h +++ b/drivers/scsi/bfa/bfa_defs_svc.h @@ -52,7 +52,7 @@ struct bfa_iocfc_fwcfg_s { u16 num_uf_bufs; /* unsolicited recv buffers */ u8 num_cqs; u8 fw_tick_res; /* FW clock resolution in ms */ - u8 rsvd[2]; + u8 rsvd[6]; }; #pragma pack() diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c index d4f951fe753e..5d2a1307e5ce 100644 --- a/drivers/scsi/bfa/bfa_fcs_lport.c +++ b/drivers/scsi/bfa/bfa_fcs_lport.c @@ -5717,6 +5717,8 @@ bfa_fcs_vport_free(struct bfa_fcs_vport_s *vport) if (vport_drv->comp_del) complete(vport_drv->comp_del); + else + kfree(vport_drv); bfa_lps_delete(vport->lps); } diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c index 52628d5d3c9b..fe0463a1db04 100644 --- a/drivers/scsi/bfa/bfa_fcs_rport.c +++ b/drivers/scsi/bfa/bfa_fcs_rport.c @@ -2169,7 +2169,10 @@ bfa_fcs_rport_update(struct bfa_fcs_rport_s *rport, struct fc_logi_s *plogi) * - MAX receive frame size */ rport->cisc = plogi->csp.cisc; - rport->maxfrsize = be16_to_cpu(plogi->class3.rxsz); + if (be16_to_cpu(plogi->class3.rxsz) < be16_to_cpu(plogi->csp.rxsz)) + rport->maxfrsize = be16_to_cpu(plogi->class3.rxsz); + else + rport->maxfrsize = be16_to_cpu(plogi->csp.rxsz); bfa_trc(port->fcs, be16_to_cpu(plogi->csp.bbcred)); bfa_trc(port->fcs, port->fabric->bb_credit); diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c index eca7ab78085b..14e6284e48e4 100644 --- a/drivers/scsi/bfa/bfa_ioc.c +++ b/drivers/scsi/bfa/bfa_ioc.c @@ -88,7 +88,6 @@ static void bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc); static void bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc); static void bfa_ioc_mbox_flush(struct bfa_ioc_s *ioc); static void bfa_ioc_recover(struct bfa_ioc_s *ioc); -static void bfa_ioc_check_attr_wwns(struct bfa_ioc_s *ioc); static void bfa_ioc_event_notify(struct bfa_ioc_s *ioc , enum bfa_ioc_event_e event); static void bfa_ioc_disable_comp(struct bfa_ioc_s *ioc); @@ -97,7 +96,6 @@ static void bfa_ioc_debug_save_ftrc(struct bfa_ioc_s *ioc); static void bfa_ioc_fail_notify(struct bfa_ioc_s *ioc); static void bfa_ioc_pf_fwmismatch(struct bfa_ioc_s *ioc); - /* * IOC state machine definitions/declarations */ @@ -114,7 +112,6 @@ enum ioc_event { IOC_E_HWERROR = 10, /* hardware error interrupt */ IOC_E_TIMEOUT = 11, /* timeout */ IOC_E_HWFAILED = 12, /* PCI mapping failure notice */ - IOC_E_FWRSP_ACQ_ADDR = 13, /* Acquiring address */ }; bfa_fsm_state_decl(bfa_ioc, uninit, struct bfa_ioc_s, enum ioc_event); @@ -127,7 +124,6 @@ bfa_fsm_state_decl(bfa_ioc, fail, struct bfa_ioc_s, enum ioc_event); bfa_fsm_state_decl(bfa_ioc, disabling, struct bfa_ioc_s, enum ioc_event); bfa_fsm_state_decl(bfa_ioc, disabled, struct bfa_ioc_s, enum ioc_event); bfa_fsm_state_decl(bfa_ioc, hwfail, struct bfa_ioc_s, enum ioc_event); -bfa_fsm_state_decl(bfa_ioc, acq_addr, struct bfa_ioc_s, enum ioc_event); static struct bfa_sm_table_s ioc_sm_table[] = { {BFA_SM(bfa_ioc_sm_uninit), BFA_IOC_UNINIT}, @@ -140,7 +136,6 @@ static struct bfa_sm_table_s ioc_sm_table[] = { {BFA_SM(bfa_ioc_sm_disabling), BFA_IOC_DISABLING}, {BFA_SM(bfa_ioc_sm_disabled), BFA_IOC_DISABLED}, {BFA_SM(bfa_ioc_sm_hwfail), BFA_IOC_HWFAIL}, - {BFA_SM(bfa_ioc_sm_acq_addr), BFA_IOC_ACQ_ADDR}, }; /* @@ -371,17 +366,9 @@ bfa_ioc_sm_getattr(struct bfa_ioc_s *ioc, enum ioc_event event) switch (event) { case IOC_E_FWRSP_GETATTR: bfa_ioc_timer_stop(ioc); - bfa_ioc_check_attr_wwns(ioc); - bfa_ioc_hb_monitor(ioc); bfa_fsm_set_state(ioc, bfa_ioc_sm_op); break; - case IOC_E_FWRSP_ACQ_ADDR: - bfa_ioc_timer_stop(ioc); - bfa_ioc_hb_monitor(ioc); - bfa_fsm_set_state(ioc, bfa_ioc_sm_acq_addr); - break; - case IOC_E_PFFAILED: case IOC_E_HWERROR: bfa_ioc_timer_stop(ioc); @@ -406,51 +393,6 @@ bfa_ioc_sm_getattr(struct bfa_ioc_s *ioc, enum ioc_event event) } } -/* - * Acquiring address from fabric (entry function) - */ -static void -bfa_ioc_sm_acq_addr_entry(struct bfa_ioc_s *ioc) -{ -} - -/* - * Acquiring address from the fabric - */ -static void -bfa_ioc_sm_acq_addr(struct bfa_ioc_s *ioc, enum ioc_event event) -{ - bfa_trc(ioc, event); - - switch (event) { - case IOC_E_FWRSP_GETATTR: - bfa_ioc_check_attr_wwns(ioc); - bfa_fsm_set_state(ioc, bfa_ioc_sm_op); - break; - - case IOC_E_PFFAILED: - case IOC_E_HWERROR: - bfa_hb_timer_stop(ioc); - case IOC_E_HBFAIL: - ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE); - bfa_fsm_set_state(ioc, bfa_ioc_sm_fail); - if (event != IOC_E_PFFAILED) - bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_GETATTRFAIL); - break; - - case IOC_E_DISABLE: - bfa_hb_timer_stop(ioc); - bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling); - break; - - case IOC_E_ENABLE: - break; - - default: - bfa_sm_fault(ioc, event); - } -} - static void bfa_ioc_sm_op_entry(struct bfa_ioc_s *ioc) { @@ -458,6 +400,7 @@ bfa_ioc_sm_op_entry(struct bfa_ioc_s *ioc) ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK); bfa_ioc_event_notify(ioc, BFA_IOC_E_ENABLED); + bfa_ioc_hb_monitor(ioc); BFA_LOG(KERN_INFO, bfad, bfa_log_level, "IOC enabled\n"); bfa_ioc_aen_post(ioc, BFA_IOC_AEN_ENABLE); } @@ -738,26 +681,60 @@ static void bfa_iocpf_sm_fwcheck_entry(struct bfa_iocpf_s *iocpf) { struct bfi_ioc_image_hdr_s fwhdr; - u32 fwstate = readl(iocpf->ioc->ioc_regs.ioc_fwstate); + u32 r32, fwstate, pgnum, pgoff, loff = 0; + int i; + + /* + * Spin on init semaphore to serialize. + */ + r32 = readl(iocpf->ioc->ioc_regs.ioc_init_sem_reg); + while (r32 & 0x1) { + udelay(20); + r32 = readl(iocpf->ioc->ioc_regs.ioc_init_sem_reg); + } /* h/w sem init */ - if (fwstate == BFI_IOC_UNINIT) + fwstate = readl(iocpf->ioc->ioc_regs.ioc_fwstate); + if (fwstate == BFI_IOC_UNINIT) { + writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg); goto sem_get; + } bfa_ioc_fwver_get(iocpf->ioc, &fwhdr); - if (swab32(fwhdr.exec) == BFI_FWBOOT_TYPE_NORMAL) + if (swab32(fwhdr.exec) == BFI_FWBOOT_TYPE_NORMAL) { + writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg); goto sem_get; + } + + /* + * Clear fwver hdr + */ + pgnum = PSS_SMEM_PGNUM(iocpf->ioc->ioc_regs.smem_pg0, loff); + pgoff = PSS_SMEM_PGOFF(loff); + writel(pgnum, iocpf->ioc->ioc_regs.host_page_num_fn); + + for (i = 0; i < sizeof(struct bfi_ioc_image_hdr_s) / sizeof(u32); i++) { + bfa_mem_write(iocpf->ioc->ioc_regs.smem_page_start, loff, 0); + loff += sizeof(u32); + } bfa_trc(iocpf->ioc, fwstate); - bfa_trc(iocpf->ioc, fwhdr.exec); + bfa_trc(iocpf->ioc, swab32(fwhdr.exec)); writel(BFI_IOC_UNINIT, iocpf->ioc->ioc_regs.ioc_fwstate); + writel(BFI_IOC_UNINIT, iocpf->ioc->ioc_regs.alt_ioc_fwstate); /* - * Try to lock and then unlock the semaphore. + * Unlock the hw semaphore. Should be here only once per boot. */ readl(iocpf->ioc->ioc_regs.ioc_sem_reg); writel(1, iocpf->ioc->ioc_regs.ioc_sem_reg); + + /* + * unlock init semaphore. + */ + writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg); + sem_get: bfa_ioc_hw_sem_get(iocpf->ioc); } @@ -1707,11 +1684,6 @@ bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type, u32 i; u32 asicmode; - /* - * Initialize LMEM first before code download - */ - bfa_ioc_lmem_init(ioc); - bfa_trc(ioc, bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc))); fwimg = bfa_cb_image_get_chunk(bfa_ioc_asic_gen(ioc), chunkno); @@ -1999,6 +1971,12 @@ bfa_ioc_pll_init(struct bfa_ioc_s *ioc) bfa_ioc_pll_init_asic(ioc); ioc->pllinit = BFA_TRUE; + + /* + * Initialize LMEM + */ + bfa_ioc_lmem_init(ioc); + /* * release semaphore. */ @@ -2122,10 +2100,6 @@ bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *m) bfa_ioc_getattr_reply(ioc); break; - case BFI_IOC_I2H_ACQ_ADDR_REPLY: - bfa_fsm_send_event(ioc, IOC_E_FWRSP_ACQ_ADDR); - break; - default: bfa_trc(ioc, msg->mh.msg_id); WARN_ON(1); @@ -2416,15 +2390,6 @@ bfa_ioc_is_disabled(struct bfa_ioc_s *ioc) } /* - * Return TRUE if IOC is in acquiring address state - */ -bfa_boolean_t -bfa_ioc_is_acq_addr(struct bfa_ioc_s *ioc) -{ - return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_acq_addr); -} - -/* * return true if IOC firmware is different. */ bfa_boolean_t @@ -2916,17 +2881,6 @@ bfa_ioc_recover(struct bfa_ioc_s *ioc) bfa_fsm_send_event(ioc, IOC_E_HBFAIL); } -static void -bfa_ioc_check_attr_wwns(struct bfa_ioc_s *ioc) -{ - if (bfa_ioc_get_type(ioc) == BFA_IOC_TYPE_LL) - return; - if (ioc->attr->nwwn == 0) - bfa_ioc_aen_post(ioc, BFA_IOC_AEN_INVALID_NWWN); - if (ioc->attr->pwwn == 0) - bfa_ioc_aen_post(ioc, BFA_IOC_AEN_INVALID_PWWN); -} - /* * BFA IOC PF private functions */ @@ -4495,7 +4449,7 @@ bfa_flash_read_part(struct bfa_flash_s *flash, enum bfa_flash_part_type type, */ #define BFA_DIAG_MEMTEST_TOV 50000 /* memtest timeout in msec */ -#define BFA_DIAG_FWPING_TOV 1000 /* msec */ +#define CT2_BFA_DIAG_MEMTEST_TOV (9*30*1000) /* 4.5 min */ /* IOC event handler */ static void @@ -4772,7 +4726,7 @@ diag_ledtest_send(struct bfa_diag_s *diag, struct bfa_diag_ledtest_s *ledtest) } static void -diag_ledtest_comp(struct bfa_diag_s *diag, struct bfi_diag_ledtest_rsp_s * msg) +diag_ledtest_comp(struct bfa_diag_s *diag, struct bfi_diag_ledtest_rsp_s *msg) { bfa_trc(diag, diag->ledtest.lock); diag->ledtest.lock = BFA_FALSE; @@ -4850,6 +4804,8 @@ bfa_diag_memtest(struct bfa_diag_s *diag, struct bfa_diag_memtest_s *memtest, u32 pattern, struct bfa_diag_memtest_result *result, bfa_cb_diag_t cbfn, void *cbarg) { + u32 memtest_tov; + bfa_trc(diag, pattern); if (!bfa_ioc_adapter_is_disabled(diag->ioc)) @@ -4869,8 +4825,10 @@ bfa_diag_memtest(struct bfa_diag_s *diag, struct bfa_diag_memtest_s *memtest, /* download memtest code and take LPU0 out of reset */ bfa_ioc_boot(diag->ioc, BFI_FWBOOT_TYPE_MEMTEST, BFI_FWBOOT_ENV_OS); + memtest_tov = (bfa_ioc_asic_gen(diag->ioc) == BFI_ASIC_GEN_CT2) ? + CT2_BFA_DIAG_MEMTEST_TOV : BFA_DIAG_MEMTEST_TOV; bfa_timer_begin(diag->ioc->timer_mod, &diag->timer, - bfa_diag_memtest_done, diag, BFA_DIAG_MEMTEST_TOV); + bfa_diag_memtest_done, diag, memtest_tov); diag->timer_active = 1; return BFA_STATUS_OK; } @@ -5641,24 +5599,27 @@ bfa_dconf_sm_uninit(struct bfa_dconf_mod_s *dconf, enum bfa_dconf_event event) case BFA_DCONF_SM_INIT: if (dconf->min_cfg) { bfa_trc(dconf->bfa, dconf->min_cfg); + bfa_fsm_send_event(&dconf->bfa->iocfc, + IOCFC_E_DCONF_DONE); return; } bfa_sm_set_state(dconf, bfa_dconf_sm_flash_read); - dconf->flashdone = BFA_FALSE; - bfa_trc(dconf->bfa, dconf->flashdone); + bfa_timer_start(dconf->bfa, &dconf->timer, + bfa_dconf_timer, dconf, BFA_DCONF_UPDATE_TOV); bfa_status = bfa_flash_read_part(BFA_FLASH(dconf->bfa), BFA_FLASH_PART_DRV, dconf->instance, dconf->dconf, sizeof(struct bfa_dconf_s), 0, bfa_dconf_init_cb, dconf->bfa); if (bfa_status != BFA_STATUS_OK) { + bfa_timer_stop(&dconf->timer); bfa_dconf_init_cb(dconf->bfa, BFA_STATUS_FAILED); bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); return; } break; case BFA_DCONF_SM_EXIT: - dconf->flashdone = BFA_TRUE; + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); case BFA_DCONF_SM_IOCDISABLE: case BFA_DCONF_SM_WR: case BFA_DCONF_SM_FLASH_COMP: @@ -5679,15 +5640,20 @@ bfa_dconf_sm_flash_read(struct bfa_dconf_mod_s *dconf, switch (event) { case BFA_DCONF_SM_FLASH_COMP: + bfa_timer_stop(&dconf->timer); bfa_sm_set_state(dconf, bfa_dconf_sm_ready); break; case BFA_DCONF_SM_TIMEOUT: bfa_sm_set_state(dconf, bfa_dconf_sm_ready); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_IOC_FAILED); break; case BFA_DCONF_SM_EXIT: - dconf->flashdone = BFA_TRUE; - bfa_trc(dconf->bfa, dconf->flashdone); + bfa_timer_stop(&dconf->timer); + bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); + break; case BFA_DCONF_SM_IOCDISABLE: + bfa_timer_stop(&dconf->timer); bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); break; default: @@ -5710,9 +5676,8 @@ bfa_dconf_sm_ready(struct bfa_dconf_mod_s *dconf, enum bfa_dconf_event event) bfa_sm_set_state(dconf, bfa_dconf_sm_dirty); break; case BFA_DCONF_SM_EXIT: - dconf->flashdone = BFA_TRUE; - bfa_trc(dconf->bfa, dconf->flashdone); bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); break; case BFA_DCONF_SM_INIT: case BFA_DCONF_SM_IOCDISABLE: @@ -5774,9 +5739,7 @@ bfa_dconf_sm_final_sync(struct bfa_dconf_mod_s *dconf, bfa_timer_stop(&dconf->timer); case BFA_DCONF_SM_TIMEOUT: bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); - dconf->flashdone = BFA_TRUE; - bfa_trc(dconf->bfa, dconf->flashdone); - bfa_ioc_disable(&dconf->bfa->ioc); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); break; default: bfa_sm_fault(dconf->bfa, event); @@ -5823,8 +5786,8 @@ bfa_dconf_sm_iocdown_dirty(struct bfa_dconf_mod_s *dconf, bfa_sm_set_state(dconf, bfa_dconf_sm_dirty); break; case BFA_DCONF_SM_EXIT: - dconf->flashdone = BFA_TRUE; bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); break; case BFA_DCONF_SM_IOCDISABLE: break; @@ -5865,11 +5828,6 @@ bfa_dconf_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, if (cfg->drvcfg.min_cfg) { bfa_mem_kva_curp(dconf) += sizeof(struct bfa_dconf_hdr_s); dconf->min_cfg = BFA_TRUE; - /* - * Set the flashdone flag to TRUE explicitly as no flash - * write will happen in min_cfg mode. - */ - dconf->flashdone = BFA_TRUE; } else { dconf->min_cfg = BFA_FALSE; bfa_mem_kva_curp(dconf) += sizeof(struct bfa_dconf_s); @@ -5885,9 +5843,7 @@ bfa_dconf_init_cb(void *arg, bfa_status_t status) struct bfa_s *bfa = arg; struct bfa_dconf_mod_s *dconf = BFA_DCONF_MOD(bfa); - dconf->flashdone = BFA_TRUE; - bfa_trc(bfa, dconf->flashdone); - bfa_iocfc_cb_dconf_modinit(bfa, status); + bfa_sm_send_event(dconf, BFA_DCONF_SM_FLASH_COMP); if (status == BFA_STATUS_OK) { bfa_dconf_read_data_valid(bfa) = BFA_TRUE; if (dconf->dconf->hdr.signature != BFI_DCONF_SIGNATURE) @@ -5895,7 +5851,7 @@ bfa_dconf_init_cb(void *arg, bfa_status_t status) if (dconf->dconf->hdr.version != BFI_DCONF_VERSION) dconf->dconf->hdr.version = BFI_DCONF_VERSION; } - bfa_sm_send_event(dconf, BFA_DCONF_SM_FLASH_COMP); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_DCONF_DONE); } void @@ -5977,7 +5933,5 @@ void bfa_dconf_modexit(struct bfa_s *bfa) { struct bfa_dconf_mod_s *dconf = BFA_DCONF_MOD(bfa); - BFA_DCONF_MOD(bfa)->flashdone = BFA_FALSE; - bfa_trc(bfa, BFA_DCONF_MOD(bfa)->flashdone); bfa_sm_send_event(dconf, BFA_DCONF_SM_EXIT); } diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h index 546d46b37101..1a99d4b5b50f 100644 --- a/drivers/scsi/bfa/bfa_ioc.h +++ b/drivers/scsi/bfa/bfa_ioc.h @@ -373,6 +373,22 @@ struct bfa_cb_qe_s { }; /* + * IOCFC state machine definitions/declarations + */ +enum iocfc_event { + IOCFC_E_INIT = 1, /* IOCFC init request */ + IOCFC_E_START = 2, /* IOCFC mod start request */ + IOCFC_E_STOP = 3, /* IOCFC stop request */ + IOCFC_E_ENABLE = 4, /* IOCFC enable request */ + IOCFC_E_DISABLE = 5, /* IOCFC disable request */ + IOCFC_E_IOC_ENABLED = 6, /* IOC enabled message */ + IOCFC_E_IOC_DISABLED = 7, /* IOC disabled message */ + IOCFC_E_IOC_FAILED = 8, /* failure notice by IOC sm */ + IOCFC_E_DCONF_DONE = 9, /* dconf read/write done */ + IOCFC_E_CFG_DONE = 10, /* IOCFC config complete */ +}; + +/* * ASIC block configurtion related */ @@ -706,7 +722,6 @@ struct bfa_dconf_s { struct bfa_dconf_mod_s { bfa_sm_t sm; u8 instance; - bfa_boolean_t flashdone; bfa_boolean_t read_data_valid; bfa_boolean_t min_cfg; struct bfa_timer_s timer; diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c index d1b8f0caaa79..2eb0c6a2938d 100644 --- a/drivers/scsi/bfa/bfa_ioc_ct.c +++ b/drivers/scsi/bfa/bfa_ioc_ct.c @@ -786,17 +786,73 @@ bfa_ioc_ct2_mac_reset(void __iomem *rb) } #define CT2_NFC_MAX_DELAY 1000 +#define CT2_NFC_VER_VALID 0x143 +#define BFA_IOC_PLL_POLL 1000000 + +static bfa_boolean_t +bfa_ioc_ct2_nfc_halted(void __iomem *rb) +{ + u32 r32; + + r32 = readl(rb + CT2_NFC_CSR_SET_REG); + if (r32 & __NFC_CONTROLLER_HALTED) + return BFA_TRUE; + + return BFA_FALSE; +} + +static void +bfa_ioc_ct2_nfc_resume(void __iomem *rb) +{ + u32 r32; + int i; + + writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_CLR_REG); + for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { + r32 = readl(rb + CT2_NFC_CSR_SET_REG); + if (!(r32 & __NFC_CONTROLLER_HALTED)) + return; + udelay(1000); + } + WARN_ON(1); +} + bfa_status_t bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode) { - u32 wgn, r32; - int i; + u32 wgn, r32, nfc_ver, i; - /* - * Initialize PLL if not already done by NFC - */ wgn = readl(rb + CT2_WGN_STATUS); - if (!(wgn & __GLBL_PF_VF_CFG_RDY)) { + nfc_ver = readl(rb + CT2_RSC_GPR15_REG); + + if ((wgn == (__A2T_AHB_LOAD | __WGN_READY)) && + (nfc_ver >= CT2_NFC_VER_VALID)) { + if (bfa_ioc_ct2_nfc_halted(rb)) + bfa_ioc_ct2_nfc_resume(rb); + + writel(__RESET_AND_START_SCLK_LCLK_PLLS, + rb + CT2_CSI_FW_CTL_SET_REG); + + for (i = 0; i < BFA_IOC_PLL_POLL; i++) { + r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); + if (r32 & __RESET_AND_START_SCLK_LCLK_PLLS) + break; + } + + WARN_ON(!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)); + + for (i = 0; i < BFA_IOC_PLL_POLL; i++) { + r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); + if (!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)) + break; + } + + WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); + udelay(1000); + + r32 = readl(rb + CT2_CSI_FW_CTL_REG); + WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); + } else { writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_SET_REG); for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { r32 = readl(rb + CT2_NFC_CSR_SET_REG); @@ -804,57 +860,62 @@ bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode) break; udelay(1000); } - } - /* - * Mask the interrupts and clear any - * pending interrupts. - */ - writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK)); - writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK)); - - r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); - if (r32 == 1) { - writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT)); - readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); + bfa_ioc_ct2_mac_reset(rb); + bfa_ioc_ct2_sclk_init(rb); + bfa_ioc_ct2_lclk_init(rb); + + /* + * release soft reset on s_clk & l_clk + */ + r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG); + writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, + (rb + CT2_APP_PLL_SCLK_CTL_REG)); + + /* + * release soft reset on s_clk & l_clk + */ + r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); + writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, + (rb + CT2_APP_PLL_LCLK_CTL_REG)); } - r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT)); - if (r32 == 1) { - writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT)); - readl((rb + CT2_LPU1_HOSTFN_CMD_STAT)); - } - - bfa_ioc_ct2_mac_reset(rb); - bfa_ioc_ct2_sclk_init(rb); - bfa_ioc_ct2_lclk_init(rb); - - /* - * release soft reset on s_clk & l_clk - */ - r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); - writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, - (rb + CT2_APP_PLL_SCLK_CTL_REG)); - - /* - * release soft reset on s_clk & l_clk - */ - r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG)); - writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, - (rb + CT2_APP_PLL_LCLK_CTL_REG)); /* * Announce flash device presence, if flash was corrupted. */ if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) { - r32 = readl((rb + PSS_GPIO_OUT_REG)); + r32 = readl(rb + PSS_GPIO_OUT_REG); writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG)); - r32 = readl((rb + PSS_GPIO_OE_REG)); + r32 = readl(rb + PSS_GPIO_OE_REG); writel(r32 | 1, (rb + PSS_GPIO_OE_REG)); } + /* + * Mask the interrupts and clear any + * pending interrupts. + */ + writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK)); + writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK)); + + /* For first time initialization, no need to clear interrupts */ + r32 = readl(rb + HOST_SEM5_REG); + if (r32 & 0x1) { + r32 = readl(rb + CT2_LPU0_HOSTFN_CMD_STAT); + if (r32 == 1) { + writel(1, rb + CT2_LPU0_HOSTFN_CMD_STAT); + readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); + } + r32 = readl(rb + CT2_LPU1_HOSTFN_CMD_STAT); + if (r32 == 1) { + writel(1, rb + CT2_LPU1_HOSTFN_CMD_STAT); + readl(rb + CT2_LPU1_HOSTFN_CMD_STAT); + } + } + bfa_ioc_ct2_mem_init(rb); - writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG)); - writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG)); + writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC0_STATE_REG); + writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC1_STATE_REG); + return BFA_STATUS_OK; } diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c index aa8a0eaf91f9..2e856e6710f7 100644 --- a/drivers/scsi/bfa/bfa_svc.c +++ b/drivers/scsi/bfa/bfa_svc.c @@ -1280,6 +1280,7 @@ bfa_lps_sm_loginwait(struct bfa_lps_s *lps, enum bfa_lps_event event) switch (event) { case BFA_LPS_SM_RESUME: bfa_sm_set_state(lps, bfa_lps_sm_login); + bfa_lps_send_login(lps); break; case BFA_LPS_SM_OFFLINE: @@ -1578,7 +1579,7 @@ bfa_lps_login_rsp(struct bfa_s *bfa, struct bfi_lps_login_rsp_s *rsp) break; case BFA_STATUS_VPORT_MAX: - if (!rsp->ext_status) + if (rsp->ext_status) bfa_lps_no_res(lps, rsp->ext_status); break; @@ -3084,33 +3085,6 @@ bfa_fcport_set_wwns(struct bfa_fcport_s *fcport) } static void -bfa_fcport_send_txcredit(void *port_cbarg) -{ - - struct bfa_fcport_s *fcport = port_cbarg; - struct bfi_fcport_set_svc_params_req_s *m; - - /* - * check for room in queue to send request now - */ - m = bfa_reqq_next(fcport->bfa, BFA_REQQ_PORT); - if (!m) { - bfa_trc(fcport->bfa, fcport->cfg.tx_bbcredit); - return; - } - - bfi_h2i_set(m->mh, BFI_MC_FCPORT, BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ, - bfa_fn_lpu(fcport->bfa)); - m->tx_bbcredit = cpu_to_be16((u16)fcport->cfg.tx_bbcredit); - m->bb_scn = fcport->cfg.bb_scn; - - /* - * queue I/O message to firmware - */ - bfa_reqq_produce(fcport->bfa, BFA_REQQ_PORT, m->mh); -} - -static void bfa_fcport_qos_stats_swap(struct bfa_qos_stats_s *d, struct bfa_qos_stats_s *s) { @@ -3602,26 +3576,24 @@ bfa_fcport_cfg_speed(struct bfa_s *bfa, enum bfa_port_speed speed) return BFA_STATUS_UNSUPP_SPEED; } - /* For Mezz card, port speed entered needs to be checked */ - if (bfa_mfg_is_mezz(fcport->bfa->ioc.attr->card_type)) { - if (bfa_ioc_get_type(&fcport->bfa->ioc) == BFA_IOC_TYPE_FC) { - /* For CT2, 1G is not supported */ - if ((speed == BFA_PORT_SPEED_1GBPS) && - (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id))) - return BFA_STATUS_UNSUPP_SPEED; + /* Port speed entered needs to be checked */ + if (bfa_ioc_get_type(&fcport->bfa->ioc) == BFA_IOC_TYPE_FC) { + /* For CT2, 1G is not supported */ + if ((speed == BFA_PORT_SPEED_1GBPS) && + (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id))) + return BFA_STATUS_UNSUPP_SPEED; - /* Already checked for Auto Speed and Max Speed supp */ - if (!(speed == BFA_PORT_SPEED_1GBPS || - speed == BFA_PORT_SPEED_2GBPS || - speed == BFA_PORT_SPEED_4GBPS || - speed == BFA_PORT_SPEED_8GBPS || - speed == BFA_PORT_SPEED_16GBPS || - speed == BFA_PORT_SPEED_AUTO)) - return BFA_STATUS_UNSUPP_SPEED; - } else { - if (speed != BFA_PORT_SPEED_10GBPS) - return BFA_STATUS_UNSUPP_SPEED; - } + /* Already checked for Auto Speed and Max Speed supp */ + if (!(speed == BFA_PORT_SPEED_1GBPS || + speed == BFA_PORT_SPEED_2GBPS || + speed == BFA_PORT_SPEED_4GBPS || + speed == BFA_PORT_SPEED_8GBPS || + speed == BFA_PORT_SPEED_16GBPS || + speed == BFA_PORT_SPEED_AUTO)) + return BFA_STATUS_UNSUPP_SPEED; + } else { + if (speed != BFA_PORT_SPEED_10GBPS) + return BFA_STATUS_UNSUPP_SPEED; } fcport->cfg.speed = speed; @@ -3765,7 +3737,6 @@ bfa_fcport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit, u8 bb_scn) fcport->cfg.bb_scn = bb_scn; if (bb_scn) fcport->bbsc_op_state = BFA_TRUE; - bfa_fcport_send_txcredit(fcport); } /* @@ -3825,8 +3796,6 @@ bfa_fcport_get_attr(struct bfa_s *bfa, struct bfa_port_attr_s *attr) attr->port_state = BFA_PORT_ST_IOCDIS; else if (bfa_ioc_fw_mismatch(&fcport->bfa->ioc)) attr->port_state = BFA_PORT_ST_FWMISMATCH; - else if (bfa_ioc_is_acq_addr(&fcport->bfa->ioc)) - attr->port_state = BFA_PORT_ST_ACQ_ADDR; } /* FCoE vlan */ diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h index b52cbb6bcd5a..f30067564639 100644 --- a/drivers/scsi/bfa/bfa_svc.h +++ b/drivers/scsi/bfa/bfa_svc.h @@ -663,10 +663,6 @@ void bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg); void bfa_cb_lps_cvl_event(void *bfad, void *uarg); /* FAA specific APIs */ -bfa_status_t bfa_faa_enable(struct bfa_s *bfa, - bfa_cb_iocfc_t cbfn, void *cbarg); -bfa_status_t bfa_faa_disable(struct bfa_s *bfa, - bfa_cb_iocfc_t cbfn, void *cbarg); bfa_status_t bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr, bfa_cb_iocfc_t cbfn, void *cbarg); diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c index 1938fe0473e9..7b1ecd2b3ffe 100644 --- a/drivers/scsi/bfa/bfad_attr.c +++ b/drivers/scsi/bfa/bfad_attr.c @@ -442,6 +442,43 @@ bfad_im_vport_create(struct fc_vport *fc_vport, bool disable) return status; } +int +bfad_im_issue_fc_host_lip(struct Scsi_Host *shost) +{ + struct bfad_im_port_s *im_port = + (struct bfad_im_port_s *) shost->hostdata[0]; + struct bfad_s *bfad = im_port->bfad; + struct bfad_hal_comp fcomp; + unsigned long flags; + uint32_t status; + + init_completion(&fcomp.comp); + spin_lock_irqsave(&bfad->bfad_lock, flags); + status = bfa_port_disable(&bfad->bfa.modules.port, + bfad_hcb_comp, &fcomp); + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + + if (status != BFA_STATUS_OK) + return -EIO; + + wait_for_completion(&fcomp.comp); + if (fcomp.status != BFA_STATUS_OK) + return -EIO; + + spin_lock_irqsave(&bfad->bfad_lock, flags); + status = bfa_port_enable(&bfad->bfa.modules.port, + bfad_hcb_comp, &fcomp); + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + if (status != BFA_STATUS_OK) + return -EIO; + + wait_for_completion(&fcomp.comp); + if (fcomp.status != BFA_STATUS_OK) + return -EIO; + + return 0; +} + static int bfad_im_vport_delete(struct fc_vport *fc_vport) { @@ -457,8 +494,11 @@ bfad_im_vport_delete(struct fc_vport *fc_vport) unsigned long flags; struct completion fcomp; - if (im_port->flags & BFAD_PORT_DELETE) - goto free_scsi_host; + if (im_port->flags & BFAD_PORT_DELETE) { + bfad_scsi_host_free(bfad, im_port); + list_del(&vport->list_entry); + return 0; + } port = im_port->port; @@ -489,7 +529,6 @@ bfad_im_vport_delete(struct fc_vport *fc_vport) wait_for_completion(vport->comp_del); -free_scsi_host: bfad_scsi_host_free(bfad, im_port); list_del(&vport->list_entry); kfree(vport); @@ -579,7 +618,7 @@ struct fc_function_template bfad_im_fc_function_template = { .show_rport_dev_loss_tmo = 1, .get_rport_dev_loss_tmo = bfad_im_get_rport_loss_tmo, .set_rport_dev_loss_tmo = bfad_im_set_rport_loss_tmo, - + .issue_fc_host_lip = bfad_im_issue_fc_host_lip, .vport_create = bfad_im_vport_create, .vport_delete = bfad_im_vport_delete, .vport_disable = bfad_im_vport_disable, diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 8005c6c5a080..e1f4b10df42a 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -1288,50 +1288,6 @@ out: } int -bfad_iocmd_faa_enable(struct bfad_s *bfad, void *cmd) -{ - struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)cmd; - unsigned long flags; - struct bfad_hal_comp fcomp; - - init_completion(&fcomp.comp); - iocmd->status = BFA_STATUS_OK; - spin_lock_irqsave(&bfad->bfad_lock, flags); - iocmd->status = bfa_faa_enable(&bfad->bfa, bfad_hcb_comp, &fcomp); - spin_unlock_irqrestore(&bfad->bfad_lock, flags); - - if (iocmd->status != BFA_STATUS_OK) - goto out; - - wait_for_completion(&fcomp.comp); - iocmd->status = fcomp.status; -out: - return 0; -} - -int -bfad_iocmd_faa_disable(struct bfad_s *bfad, void *cmd) -{ - struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)cmd; - unsigned long flags; - struct bfad_hal_comp fcomp; - - init_completion(&fcomp.comp); - iocmd->status = BFA_STATUS_OK; - spin_lock_irqsave(&bfad->bfad_lock, flags); - iocmd->status = bfa_faa_disable(&bfad->bfa, bfad_hcb_comp, &fcomp); - spin_unlock_irqrestore(&bfad->bfad_lock, flags); - - if (iocmd->status != BFA_STATUS_OK) - goto out; - - wait_for_completion(&fcomp.comp); - iocmd->status = fcomp.status; -out: - return 0; -} - -int bfad_iocmd_faa_query(struct bfad_s *bfad, void *cmd) { struct bfa_bsg_faa_attr_s *iocmd = (struct bfa_bsg_faa_attr_s *)cmd; @@ -1918,6 +1874,7 @@ bfad_iocmd_debug_fw_core(struct bfad_s *bfad, void *cmd, struct bfa_bsg_debug_s *iocmd = (struct bfa_bsg_debug_s *)cmd; void *iocmd_bufptr; unsigned long flags; + u32 offset; if (bfad_chk_iocmd_sz(payload_len, sizeof(struct bfa_bsg_debug_s), BFA_DEBUG_FW_CORE_CHUNK_SZ) != BFA_STATUS_OK) { @@ -1935,8 +1892,10 @@ bfad_iocmd_debug_fw_core(struct bfad_s *bfad, void *cmd, iocmd_bufptr = (char *)iocmd + sizeof(struct bfa_bsg_debug_s); spin_lock_irqsave(&bfad->bfad_lock, flags); + offset = iocmd->offset; iocmd->status = bfa_ioc_debug_fwcore(&bfad->bfa.ioc, iocmd_bufptr, - (u32 *)&iocmd->offset, &iocmd->bufsz); + &offset, &iocmd->bufsz); + iocmd->offset = offset; spin_unlock_irqrestore(&bfad->bfad_lock, flags); out: return 0; @@ -2633,12 +2592,6 @@ bfad_iocmd_handler(struct bfad_s *bfad, unsigned int cmd, void *iocmd, case IOCMD_FLASH_DISABLE_OPTROM: rc = bfad_iocmd_ablk_optrom(bfad, cmd, iocmd); break; - case IOCMD_FAA_ENABLE: - rc = bfad_iocmd_faa_enable(bfad, iocmd); - break; - case IOCMD_FAA_DISABLE: - rc = bfad_iocmd_faa_disable(bfad, iocmd); - break; case IOCMD_FAA_QUERY: rc = bfad_iocmd_faa_query(bfad, iocmd); break; @@ -2809,9 +2762,16 @@ bfad_im_bsg_vendor_request(struct fc_bsg_job *job) struct bfad_im_port_s *im_port = (struct bfad_im_port_s *) job->shost->hostdata[0]; struct bfad_s *bfad = im_port->bfad; + struct request_queue *request_q = job->req->q; void *payload_kbuf; int rc = -EINVAL; + /* + * Set the BSG device request_queue size to 256 to support + * payloads larger than 512*1024K bytes. + */ + blk_queue_max_segments(request_q, 256); + /* Allocate a temp buffer to hold the passed in user space command */ payload_kbuf = kzalloc(job->request_payload.payload_len, GFP_KERNEL); if (!payload_kbuf) { diff --git a/drivers/scsi/bfa/bfad_bsg.h b/drivers/scsi/bfa/bfad_bsg.h index e859adb9aa9e..17ad67283130 100644 --- a/drivers/scsi/bfa/bfad_bsg.h +++ b/drivers/scsi/bfa/bfad_bsg.h @@ -83,8 +83,6 @@ enum { IOCMD_PORT_CFG_MODE, IOCMD_FLASH_ENABLE_OPTROM, IOCMD_FLASH_DISABLE_OPTROM, - IOCMD_FAA_ENABLE, - IOCMD_FAA_DISABLE, IOCMD_FAA_QUERY, IOCMD_CEE_GET_ATTR, IOCMD_CEE_GET_STATS, diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index dc5b9d99c450..7f74f1d19124 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -56,7 +56,7 @@ #ifdef BFA_DRIVER_VERSION #define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION #else -#define BFAD_DRIVER_VERSION "3.0.2.2" +#define BFAD_DRIVER_VERSION "3.0.23.0" #endif #define BFAD_PROTO_NAME FCPI_NAME diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h index 0d9f1fb50db0..d4220e13cafa 100644 --- a/drivers/scsi/bfa/bfi_ms.h +++ b/drivers/scsi/bfa/bfi_ms.h @@ -28,17 +28,15 @@ enum bfi_iocfc_h2i_msgs { BFI_IOCFC_H2I_CFG_REQ = 1, BFI_IOCFC_H2I_SET_INTR_REQ = 2, BFI_IOCFC_H2I_UPDATEQ_REQ = 3, - BFI_IOCFC_H2I_FAA_ENABLE_REQ = 4, - BFI_IOCFC_H2I_FAA_DISABLE_REQ = 5, - BFI_IOCFC_H2I_FAA_QUERY_REQ = 6, + BFI_IOCFC_H2I_FAA_QUERY_REQ = 4, + BFI_IOCFC_H2I_ADDR_REQ = 5, }; enum bfi_iocfc_i2h_msgs { BFI_IOCFC_I2H_CFG_REPLY = BFA_I2HM(1), BFI_IOCFC_I2H_UPDATEQ_RSP = BFA_I2HM(3), - BFI_IOCFC_I2H_FAA_ENABLE_RSP = BFA_I2HM(4), - BFI_IOCFC_I2H_FAA_DISABLE_RSP = BFA_I2HM(5), - BFI_IOCFC_I2H_FAA_QUERY_RSP = BFA_I2HM(6), + BFI_IOCFC_I2H_FAA_QUERY_RSP = BFA_I2HM(4), + BFI_IOCFC_I2H_ADDR_MSG = BFA_I2HM(5), }; struct bfi_iocfc_cfg_s { @@ -184,6 +182,13 @@ struct bfi_faa_en_dis_s { struct bfi_mhdr_s mh; /* common msg header */ }; +struct bfi_faa_addr_msg_s { + struct bfi_mhdr_s mh; /* common msg header */ + u8 rsvd[4]; + wwn_t pwwn; /* Fabric acquired PWWN */ + wwn_t nwwn; /* Fabric acquired PWWN */ +}; + /* * BFI_IOCFC_H2I_FAA_QUERY_REQ message */ diff --git a/drivers/scsi/bfa/bfi_reg.h b/drivers/scsi/bfa/bfi_reg.h index d892064b64a8..ed5f159e1867 100644 --- a/drivers/scsi/bfa/bfi_reg.h +++ b/drivers/scsi/bfa/bfi_reg.h @@ -335,11 +335,17 @@ enum { #define __PMM_1T_PNDB_P 0x00000002 #define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c #define CT2_WGN_STATUS 0x00014990 +#define __A2T_AHB_LOAD 0x00000800 #define __WGN_READY 0x00000400 #define __GLBL_PF_VF_CFG_RDY 0x00000200 +#define CT2_NFC_CSR_CLR_REG 0x00027420 #define CT2_NFC_CSR_SET_REG 0x00027424 #define __HALT_NFC_CONTROLLER 0x00000002 #define __NFC_CONTROLLER_HALTED 0x00001000 +#define CT2_RSC_GPR15_REG 0x0002765c +#define CT2_CSI_FW_CTL_REG 0x00027080 +#define CT2_CSI_FW_CTL_SET_REG 0x00027088 +#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000 #define CT2_CSI_MAC0_CONTROL_REG 0x000270d0 #define __CSI_MAC_RESET 0x00000010 diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index abd72a01856d..c1c6a92a0b98 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -439,13 +439,13 @@ static int bnx2fc_rcv(struct sk_buff *skb, struct net_device *dev, fr->fr_dev = lport; bg = &bnx2fc_global; - spin_lock_bh(&bg->fcoe_rx_list.lock); + spin_lock(&bg->fcoe_rx_list.lock); __skb_queue_tail(&bg->fcoe_rx_list, skb); if (bg->fcoe_rx_list.qlen == 1) wake_up_process(bg->thread); - spin_unlock_bh(&bg->fcoe_rx_list.lock); + spin_unlock(&bg->fcoe_rx_list.lock); return 0; err: diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index ae7d15c44e2a..335e85192807 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1436,7 +1436,7 @@ static int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, goto err; fps = &per_cpu(fcoe_percpu, cpu); - spin_lock_bh(&fps->fcoe_rx_list.lock); + spin_lock(&fps->fcoe_rx_list.lock); if (unlikely(!fps->thread)) { /* * The targeted CPU is not ready, let's target @@ -1447,12 +1447,12 @@ static int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, "ready for incoming skb- using first online " "CPU.\n"); - spin_unlock_bh(&fps->fcoe_rx_list.lock); + spin_unlock(&fps->fcoe_rx_list.lock); cpu = cpumask_first(cpu_online_mask); fps = &per_cpu(fcoe_percpu, cpu); - spin_lock_bh(&fps->fcoe_rx_list.lock); + spin_lock(&fps->fcoe_rx_list.lock); if (!fps->thread) { - spin_unlock_bh(&fps->fcoe_rx_list.lock); + spin_unlock(&fps->fcoe_rx_list.lock); goto err; } } @@ -1463,24 +1463,17 @@ static int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, * so we're free to queue skbs into it's queue. */ - /* If this is a SCSI-FCP frame, and this is already executing on the - * correct CPU, and the queue for this CPU is empty, then go ahead - * and process the frame directly in the softirq context. - * This lets us process completions without context switching from the - * NET_RX softirq, to our receive processing thread, and then back to - * BLOCK softirq context. + /* + * Note: We used to have a set of conditions under which we would + * call fcoe_recv_frame directly, rather than queuing to the rx list + * as it could save a few cycles, but doing so is prohibited, as + * fcoe_recv_frame has several paths that may sleep, which is forbidden + * in softirq context. */ - if (fh->fh_type == FC_TYPE_FCP && - cpu == smp_processor_id() && - skb_queue_empty(&fps->fcoe_rx_list)) { - spin_unlock_bh(&fps->fcoe_rx_list.lock); - fcoe_recv_frame(skb); - } else { - __skb_queue_tail(&fps->fcoe_rx_list, skb); - if (fps->fcoe_rx_list.qlen == 1) - wake_up_process(fps->thread); - spin_unlock_bh(&fps->fcoe_rx_list.lock); - } + __skb_queue_tail(&fps->fcoe_rx_list, skb); + if (fps->thread->state == TASK_INTERRUPTIBLE) + wake_up_process(fps->thread); + spin_unlock(&fps->fcoe_rx_list.lock); return 0; err: @@ -1797,23 +1790,29 @@ static int fcoe_percpu_receive_thread(void *arg) { struct fcoe_percpu_s *p = arg; struct sk_buff *skb; + struct sk_buff_head tmp; + + skb_queue_head_init(&tmp); set_user_nice(current, -20); while (!kthread_should_stop()) { spin_lock_bh(&p->fcoe_rx_list.lock); - while ((skb = __skb_dequeue(&p->fcoe_rx_list)) == NULL) { + skb_queue_splice_init(&p->fcoe_rx_list, &tmp); + spin_unlock_bh(&p->fcoe_rx_list.lock); + + while ((skb = __skb_dequeue(&tmp)) != NULL) + fcoe_recv_frame(skb); + + spin_lock_bh(&p->fcoe_rx_list.lock); + if (!skb_queue_len(&p->fcoe_rx_list)) { set_current_state(TASK_INTERRUPTIBLE); spin_unlock_bh(&p->fcoe_rx_list.lock); schedule(); set_current_state(TASK_RUNNING); - if (kthread_should_stop()) - return 0; - spin_lock_bh(&p->fcoe_rx_list.lock); - } - spin_unlock_bh(&p->fcoe_rx_list.lock); - fcoe_recv_frame(skb); + } else + spin_unlock_bh(&p->fcoe_rx_list.lock); } return 0; } @@ -2187,8 +2186,12 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) /* start FIP Discovery and FLOGI */ lport->boot_time = jiffies; fc_fabric_login(lport); - if (!fcoe_link_ok(lport)) + if (!fcoe_link_ok(lport)) { + rtnl_unlock(); fcoe_ctlr_link_up(&fcoe->ctlr); + mutex_unlock(&fcoe_config_mutex); + return rc; + } out_nodev: rtnl_unlock(); @@ -2261,31 +2264,14 @@ static int fcoe_link_ok(struct fc_lport *lport) static void fcoe_percpu_clean(struct fc_lport *lport) { struct fcoe_percpu_s *pp; - struct fcoe_rcv_info *fr; - struct sk_buff_head *list; - struct sk_buff *skb, *next; - struct sk_buff *head; + struct sk_buff *skb; unsigned int cpu; for_each_possible_cpu(cpu) { pp = &per_cpu(fcoe_percpu, cpu); - spin_lock_bh(&pp->fcoe_rx_list.lock); - list = &pp->fcoe_rx_list; - head = list->next; - for (skb = head; skb != (struct sk_buff *)list; - skb = next) { - next = skb->next; - fr = fcoe_dev_from_skb(skb); - if (fr->fr_dev == lport) { - __skb_unlink(skb, list); - kfree_skb(skb); - } - } - if (!pp->thread || !cpu_online(cpu)) { - spin_unlock_bh(&pp->fcoe_rx_list.lock); + if (!pp->thread || !cpu_online(cpu)) continue; - } skb = dev_alloc_skb(0); if (!skb) { @@ -2294,6 +2280,7 @@ static void fcoe_percpu_clean(struct fc_lport *lport) } skb->destructor = fcoe_percpu_flush_done; + spin_lock_bh(&pp->fcoe_rx_list.lock); __skb_queue_tail(&pp->fcoe_rx_list, skb); if (pp->fcoe_rx_list.qlen == 1) wake_up_process(pp->thread); diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index e7522dcc296e..249a106888d9 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -242,7 +242,7 @@ static void fcoe_ctlr_announce(struct fcoe_ctlr *fip) printk(KERN_INFO "libfcoe: host%d: FIP selected " "Fibre-Channel Forwarder MAC %pM\n", fip->lp->host->host_no, sel->fcf_mac); - memcpy(fip->dest_addr, sel->fcf_mac, ETH_ALEN); + memcpy(fip->dest_addr, sel->fcoe_mac, ETH_ALEN); fip->map_dest = 0; } unlock: @@ -824,6 +824,7 @@ static int fcoe_ctlr_parse_adv(struct fcoe_ctlr *fip, memcpy(fcf->fcf_mac, ((struct fip_mac_desc *)desc)->fd_mac, ETH_ALEN); + memcpy(fcf->fcoe_mac, fcf->fcf_mac, ETH_ALEN); if (!is_valid_ether_addr(fcf->fcf_mac)) { LIBFCOE_FIP_DBG(fip, "Invalid MAC addr %pM in FIP adv\n", @@ -1013,6 +1014,7 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb) struct fip_desc *desc; struct fip_encaps *els; struct fcoe_dev_stats *stats; + struct fcoe_fcf *sel; enum fip_desc_type els_dtype = 0; u8 els_op; u8 sub; @@ -1040,7 +1042,8 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb) goto drop; /* Drop ELS if there are duplicate critical descriptors */ if (desc->fip_dtype < 32) { - if (desc_mask & 1U << desc->fip_dtype) { + if ((desc->fip_dtype != FIP_DT_MAC) && + (desc_mask & 1U << desc->fip_dtype)) { LIBFCOE_FIP_DBG(fip, "Duplicate Critical " "Descriptors in FIP ELS\n"); goto drop; @@ -1049,17 +1052,32 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb) } switch (desc->fip_dtype) { case FIP_DT_MAC: + sel = fip->sel_fcf; if (desc_cnt == 1) { LIBFCOE_FIP_DBG(fip, "FIP descriptors " "received out of order\n"); goto drop; } + /* + * Some switch implementations send two MAC descriptors, + * with first MAC(granted_mac) being the FPMA, and the + * second one(fcoe_mac) is used as destination address + * for sending/receiving FCoE packets. FIP traffic is + * sent using fip_mac. For regular switches, both + * fip_mac and fcoe_mac would be the same. + */ + if (desc_cnt == 2) + memcpy(granted_mac, + ((struct fip_mac_desc *)desc)->fd_mac, + ETH_ALEN); if (dlen != sizeof(struct fip_mac_desc)) goto len_err; - memcpy(granted_mac, - ((struct fip_mac_desc *)desc)->fd_mac, - ETH_ALEN); + + if ((desc_cnt == 3) && (sel)) + memcpy(sel->fcoe_mac, + ((struct fip_mac_desc *)desc)->fd_mac, + ETH_ALEN); break; case FIP_DT_FLOGI: case FIP_DT_FDISC: @@ -1273,11 +1291,6 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, * No Vx_Port description. Clear all NPIV ports, * followed by physical port */ - mutex_lock(&lport->lp_mutex); - list_for_each_entry(vn_port, &lport->vports, list) - fc_lport_reset(vn_port); - mutex_unlock(&lport->lp_mutex); - mutex_lock(&fip->ctlr_mutex); per_cpu_ptr(lport->dev_stats, get_cpu())->VLinkFailureCount++; @@ -1285,6 +1298,11 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, fcoe_ctlr_reset(fip); mutex_unlock(&fip->ctlr_mutex); + mutex_lock(&lport->lp_mutex); + list_for_each_entry(vn_port, &lport->vports, list) + fc_lport_reset(vn_port); + mutex_unlock(&lport->lp_mutex); + fc_lport_reset(fip->lp); fcoe_ctlr_solicit(fip, NULL); } else { diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index cdfe5a16de2a..e002cd466e9a 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -104,7 +104,9 @@ static DEFINE_SPINLOCK(ipr_driver_lock); static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { { /* Gemstone, Citrine, Obsidian, and Obsidian-E */ .mailbox = 0x0042C, + .max_cmds = 100, .cache_line_size = 0x20, + .clear_isr = 1, { .set_interrupt_mask_reg = 0x0022C, .clr_interrupt_mask_reg = 0x00230, @@ -126,7 +128,9 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { }, { /* Snipe and Scamp */ .mailbox = 0x0052C, + .max_cmds = 100, .cache_line_size = 0x20, + .clear_isr = 1, { .set_interrupt_mask_reg = 0x00288, .clr_interrupt_mask_reg = 0x0028C, @@ -148,7 +152,9 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { }, { /* CRoC */ .mailbox = 0x00044, + .max_cmds = 1000, .cache_line_size = 0x20, + .clear_isr = 0, { .set_interrupt_mask_reg = 0x00010, .clr_interrupt_mask_reg = 0x00018, @@ -847,8 +853,6 @@ static void ipr_do_req(struct ipr_cmnd *ipr_cmd, ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0); - mb(); - ipr_send_command(ipr_cmd); } @@ -982,8 +986,6 @@ static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type, ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR); - mb(); - ipr_send_command(ipr_cmd); } else { list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q); @@ -4339,8 +4341,7 @@ static struct ipr_resource_entry *ipr_find_starget(struct scsi_target *starget) list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { if ((res->bus == starget->channel) && - (res->target == starget->id) && - (res->lun == 0)) { + (res->target == starget->id)) { return res; } } @@ -4414,12 +4415,14 @@ static void ipr_target_destroy(struct scsi_target *starget) struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata; if (ioa_cfg->sis64) { - if (starget->channel == IPR_ARRAY_VIRTUAL_BUS) - clear_bit(starget->id, ioa_cfg->array_ids); - else if (starget->channel == IPR_VSET_VIRTUAL_BUS) - clear_bit(starget->id, ioa_cfg->vset_ids); - else if (starget->channel == 0) - clear_bit(starget->id, ioa_cfg->target_ids); + if (!ipr_find_starget(starget)) { + if (starget->channel == IPR_ARRAY_VIRTUAL_BUS) + clear_bit(starget->id, ioa_cfg->array_ids); + else if (starget->channel == IPR_VSET_VIRTUAL_BUS) + clear_bit(starget->id, ioa_cfg->vset_ids); + else if (starget->channel == 0) + clear_bit(starget->id, ioa_cfg->target_ids); + } } if (sata_port) { @@ -5048,12 +5051,14 @@ static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg, del_timer(&ioa_cfg->reset_cmd->timer); ipr_reset_ioa_job(ioa_cfg->reset_cmd); } else if ((int_reg & IPR_PCII_HRRQ_UPDATED) == int_reg) { - if (ipr_debug && printk_ratelimit()) - dev_err(&ioa_cfg->pdev->dev, - "Spurious interrupt detected. 0x%08X\n", int_reg); - writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32); - int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); - return IRQ_NONE; + if (ioa_cfg->clear_isr) { + if (ipr_debug && printk_ratelimit()) + dev_err(&ioa_cfg->pdev->dev, + "Spurious interrupt detected. 0x%08X\n", int_reg); + writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32); + int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); + return IRQ_NONE; + } } else { if (int_reg & IPR_PCII_IOA_UNIT_CHECKED) ioa_cfg->ioa_unit_checked = 1; @@ -5153,6 +5158,9 @@ static irqreturn_t ipr_isr(int irq, void *devp) } } + if (ipr_cmd && !ioa_cfg->clear_isr) + break; + if (ipr_cmd != NULL) { /* Clear the PCI interrupt */ num_hrrq = 0; @@ -5854,14 +5862,12 @@ static int ipr_queuecommand_lck(struct scsi_cmnd *scsi_cmd, rc = ipr_build_ioadl(ioa_cfg, ipr_cmd); } - if (likely(rc == 0)) { - mb(); - ipr_send_command(ipr_cmd); - } else { - list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q); - return SCSI_MLQUEUE_HOST_BUSY; + if (unlikely(rc != 0)) { + list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q); + return SCSI_MLQUEUE_HOST_BUSY; } + ipr_send_command(ipr_cmd); return 0; } @@ -6239,8 +6245,6 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc) return AC_ERR_INVALID; } - mb(); - ipr_send_command(ipr_cmd); return 0; @@ -8277,6 +8281,10 @@ static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) if (ioa_cfg->ipr_cmd_pool) pci_pool_destroy (ioa_cfg->ipr_cmd_pool); + kfree(ioa_cfg->ipr_cmnd_list); + kfree(ioa_cfg->ipr_cmnd_list_dma); + ioa_cfg->ipr_cmnd_list = NULL; + ioa_cfg->ipr_cmnd_list_dma = NULL; ioa_cfg->ipr_cmd_pool = NULL; } @@ -8352,11 +8360,19 @@ static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) int i; ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev, - sizeof(struct ipr_cmnd), 16, 0); + sizeof(struct ipr_cmnd), 512, 0); if (!ioa_cfg->ipr_cmd_pool) return -ENOMEM; + ioa_cfg->ipr_cmnd_list = kcalloc(IPR_NUM_CMD_BLKS, sizeof(struct ipr_cmnd *), GFP_KERNEL); + ioa_cfg->ipr_cmnd_list_dma = kcalloc(IPR_NUM_CMD_BLKS, sizeof(dma_addr_t), GFP_KERNEL); + + if (!ioa_cfg->ipr_cmnd_list || !ioa_cfg->ipr_cmnd_list_dma) { + ipr_free_cmd_blks(ioa_cfg); + return -ENOMEM; + } + for (i = 0; i < IPR_NUM_CMD_BLKS; i++) { ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr); @@ -8584,6 +8600,7 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg, host->max_channel = IPR_MAX_BUS_TO_SCAN; host->unique_id = host->host_no; host->max_cmd_len = IPR_MAX_CDB_LEN; + host->can_queue = ioa_cfg->max_cmds; pci_set_drvdata(pdev, ioa_cfg); p = &ioa_cfg->chip_cfg->regs; @@ -8768,6 +8785,8 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev, /* set SIS 32 or SIS 64 */ ioa_cfg->sis64 = ioa_cfg->ipr_chip->sis_type == IPR_SIS64 ? 1 : 0; ioa_cfg->chip_cfg = ioa_cfg->ipr_chip->cfg; + ioa_cfg->clear_isr = ioa_cfg->chip_cfg->clear_isr; + ioa_cfg->max_cmds = ioa_cfg->chip_cfg->max_cmds; if (ipr_transop_timeout) ioa_cfg->transop_timeout = ipr_transop_timeout; diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index f94eaee2ff16..153b8bd91d1e 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -38,8 +38,8 @@ /* * Literals */ -#define IPR_DRIVER_VERSION "2.5.2" -#define IPR_DRIVER_DATE "(April 27, 2011)" +#define IPR_DRIVER_VERSION "2.5.3" +#define IPR_DRIVER_DATE "(March 10, 2012)" /* * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding @@ -53,7 +53,7 @@ * IPR_NUM_BASE_CMD_BLKS: This defines the maximum number of * ops the mid-layer can send to the adapter. */ -#define IPR_NUM_BASE_CMD_BLKS 100 +#define IPR_NUM_BASE_CMD_BLKS (ioa_cfg->max_cmds) #define PCI_DEVICE_ID_IBM_OBSIDIAN_E 0x0339 @@ -153,7 +153,7 @@ #define IPR_NUM_INTERNAL_CMD_BLKS (IPR_NUM_HCAMS + \ ((IPR_NUM_RESET_RELOAD_RETRIES + 1) * 2) + 4) -#define IPR_MAX_COMMANDS IPR_NUM_BASE_CMD_BLKS +#define IPR_MAX_COMMANDS 100 #define IPR_NUM_CMD_BLKS (IPR_NUM_BASE_CMD_BLKS + \ IPR_NUM_INTERNAL_CMD_BLKS) @@ -1305,7 +1305,9 @@ struct ipr_interrupts { struct ipr_chip_cfg_t { u32 mailbox; + u16 max_cmds; u8 cache_line_size; + u8 clear_isr; struct ipr_interrupt_offsets regs; }; @@ -1388,6 +1390,7 @@ struct ipr_ioa_cfg { u8 sis64:1; u8 dump_timeout:1; u8 cfg_locked:1; + u8 clear_isr:1; u8 revid; @@ -1501,8 +1504,9 @@ struct ipr_ioa_cfg { struct ata_host ata_host; char ipr_cmd_label[8]; #define IPR_CMD_LABEL "ipr_cmd" - struct ipr_cmnd *ipr_cmnd_list[IPR_NUM_CMD_BLKS]; - dma_addr_t ipr_cmnd_list_dma[IPR_NUM_CMD_BLKS]; + u32 max_cmds; + struct ipr_cmnd **ipr_cmnd_list; + dma_addr_t *ipr_cmnd_list_dma; }; /* struct ipr_ioa_cfg */ struct ipr_cmnd { diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 630291f01826..aceffadb21c7 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -2263,7 +2263,18 @@ struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lport, mp->class = class; /* adjust em exch xid range for offload */ mp->min_xid = min_xid; - mp->max_xid = max_xid; + + /* reduce range so per cpu pool fits into PCPU_MIN_UNIT_SIZE pool */ + pool_exch_range = (PCPU_MIN_UNIT_SIZE - sizeof(*pool)) / + sizeof(struct fc_exch *); + if ((max_xid - min_xid + 1) / (fc_cpu_mask + 1) > pool_exch_range) { + mp->max_xid = pool_exch_range * (fc_cpu_mask + 1) + + min_xid - 1; + } else { + mp->max_xid = max_xid; + pool_exch_range = (mp->max_xid - mp->min_xid + 1) / + (fc_cpu_mask + 1); + } mp->ep_pool = mempool_create_slab_pool(2, fc_em_cachep); if (!mp->ep_pool) @@ -2274,7 +2285,6 @@ struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lport, * divided across all cpus. The exch pointers array memory is * allocated for exch range per pool. */ - pool_exch_range = (mp->max_xid - mp->min_xid + 1) / (fc_cpu_mask + 1); mp->pool_max_index = pool_exch_range - 1; /* diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index bd5d31d022d9..ef9560dff295 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1743,8 +1743,16 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; if (mfs >= FC_SP_MIN_MAX_PAYLOAD && - mfs < lport->mfs) + mfs <= lport->mfs) { lport->mfs = mfs; + fc_host_maxframe_size(lport->host) = mfs; + } else { + FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, " + "lport->mfs:%hu\n", mfs, lport->mfs); + fc_lport_error(lport, fp); + goto err; + } + csp_flags = ntohs(flp->fl_csp.sp_features); r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov); e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov); diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile index 88928f00aa2d..fe5d396aca73 100644 --- a/drivers/scsi/lpfc/Makefile +++ b/drivers/scsi/lpfc/Makefile @@ -1,7 +1,7 @@ #/******************************************************************* # * This file is part of the Emulex Linux Device Driver for * # * Fibre Channel Host Bus Adapters. * -# * Copyright (C) 2004-2011 Emulex. All rights reserved. * +# * Copyright (C) 2004-2012 Emulex. All rights reserved. * # * EMULEX and SLI are trademarks of Emulex. * # * www.emulex.com * # * * @@ -22,6 +22,8 @@ ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage ccflags-$(GCOV) += -O0 +ccflags-y += -Werror + obj-$(CONFIG_SCSI_LPFC) := lpfc.o lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o lpfc_hbadisc.o \ diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 5fc044ff656e..3a1ffdd6d831 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -840,6 +840,8 @@ struct lpfc_hba { struct dentry *debug_dumpData; /* BlockGuard BPL */ struct dentry *debug_dumpDif; /* BlockGuard BPL */ struct dentry *debug_InjErrLBA; /* LBA to inject errors at */ + struct dentry *debug_InjErrNPortID; /* NPortID to inject errors at */ + struct dentry *debug_InjErrWWPN; /* WWPN to inject errors at */ struct dentry *debug_writeGuard; /* inject write guard_tag errors */ struct dentry *debug_writeApp; /* inject write app_tag errors */ struct dentry *debug_writeRef; /* inject write ref_tag errors */ @@ -854,6 +856,8 @@ struct lpfc_hba { uint32_t lpfc_injerr_rgrd_cnt; uint32_t lpfc_injerr_rapp_cnt; uint32_t lpfc_injerr_rref_cnt; + uint32_t lpfc_injerr_nportid; + struct lpfc_name lpfc_injerr_wwpn; sector_t lpfc_injerr_lba; #define LPFC_INJERR_LBA_OFF (sector_t)(-1) @@ -908,6 +912,8 @@ struct lpfc_hba { atomic_t fast_event_count; uint32_t fcoe_eventtag; uint32_t fcoe_eventtag_at_fcf_scan; + uint32_t fcoe_cvl_eventtag; + uint32_t fcoe_cvl_eventtag_attn; struct lpfc_fcf fcf; uint8_t fc_map[3]; uint8_t valid_vlan; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 296ad5bc4240..5eb2bc116183 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -2575,7 +2575,7 @@ LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff, # lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters # objects that have been registered with the nameserver after login. */ -LPFC_VPORT_ATTR_R(enable_da_id, 0, 0, 1, +LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1, "Deregister nameserver objects before LOGO"); /* diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 22e17be04d8a..af04b0d6688d 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2007-2011 Emulex. All rights reserved. * + * Copyright (C) 2007-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -997,38 +997,41 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf, return nbytes; } -static int -lpfc_debugfs_dif_err_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static ssize_t lpfc_debugfs_dif_err_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) { struct dentry *dent = file->f_dentry; struct lpfc_hba *phba = file->private_data; - char cbuf[16]; + char cbuf[32]; + uint64_t tmp = 0; int cnt = 0; if (dent == phba->debug_writeGuard) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wgrd_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wgrd_cnt); else if (dent == phba->debug_writeApp) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wapp_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wapp_cnt); else if (dent == phba->debug_writeRef) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wref_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wref_cnt); else if (dent == phba->debug_readGuard) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rgrd_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rgrd_cnt); else if (dent == phba->debug_readApp) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rapp_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rapp_cnt); else if (dent == phba->debug_readRef) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rref_cnt); - else if (dent == phba->debug_InjErrLBA) - cnt = snprintf(cbuf, 16, "0x%lx\n", - (unsigned long) phba->lpfc_injerr_lba); - else + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rref_cnt); + else if (dent == phba->debug_InjErrNPortID) + cnt = snprintf(cbuf, 32, "0x%06x\n", phba->lpfc_injerr_nportid); + else if (dent == phba->debug_InjErrWWPN) { + memcpy(&tmp, &phba->lpfc_injerr_wwpn, sizeof(struct lpfc_name)); + tmp = cpu_to_be64(tmp); + cnt = snprintf(cbuf, 32, "0x%016llx\n", tmp); + } else if (dent == phba->debug_InjErrLBA) { + if (phba->lpfc_injerr_lba == (sector_t)(-1)) + cnt = snprintf(cbuf, 32, "off\n"); + else + cnt = snprintf(cbuf, 32, "0x%llx\n", + (uint64_t) phba->lpfc_injerr_lba); + } else lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0547 Unknown debugfs error injection entry\n"); @@ -1042,7 +1045,7 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf, struct dentry *dent = file->f_dentry; struct lpfc_hba *phba = file->private_data; char dstbuf[32]; - unsigned long tmp; + uint64_t tmp = 0; int size; memset(dstbuf, 0, 32); @@ -1050,7 +1053,12 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf, if (copy_from_user(dstbuf, buf, size)) return 0; - if (strict_strtoul(dstbuf, 0, &tmp)) + if (dent == phba->debug_InjErrLBA) { + if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f')) + tmp = (uint64_t)(-1); + } + + if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp))) return 0; if (dent == phba->debug_writeGuard) @@ -1067,7 +1075,12 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf, phba->lpfc_injerr_rref_cnt = (uint32_t)tmp; else if (dent == phba->debug_InjErrLBA) phba->lpfc_injerr_lba = (sector_t)tmp; - else + else if (dent == phba->debug_InjErrNPortID) + phba->lpfc_injerr_nportid = (uint32_t)(tmp & Mask_DID); + else if (dent == phba->debug_InjErrWWPN) { + tmp = cpu_to_be64(tmp); + memcpy(&phba->lpfc_injerr_wwpn, &tmp, sizeof(struct lpfc_name)); + } else lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0548 Unknown debugfs error injection entry\n"); @@ -3521,7 +3534,7 @@ static const struct file_operations lpfc_debugfs_op_dumpDif = { #undef lpfc_debugfs_op_dif_err static const struct file_operations lpfc_debugfs_op_dif_err = { .owner = THIS_MODULE, - .open = lpfc_debugfs_dif_err_open, + .open = simple_open, .llseek = lpfc_debugfs_lseek, .read = lpfc_debugfs_dif_err_read, .write = lpfc_debugfs_dif_err_write, @@ -3949,6 +3962,28 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) } phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + snprintf(name, sizeof(name), "InjErrNPortID"); + phba->debug_InjErrNPortID = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_InjErrNPortID) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0809 Cannot create debugfs InjErrNPortID\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "InjErrWWPN"); + phba->debug_InjErrWWPN = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_InjErrWWPN) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0810 Cannot create debugfs InjErrWWPN\n"); + goto debug_failed; + } + snprintf(name, sizeof(name), "writeGuardInjErr"); phba->debug_writeGuard = debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, @@ -4321,6 +4356,14 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport) debugfs_remove(phba->debug_InjErrLBA); /* InjErrLBA */ phba->debug_InjErrLBA = NULL; } + if (phba->debug_InjErrNPortID) { /* InjErrNPortID */ + debugfs_remove(phba->debug_InjErrNPortID); + phba->debug_InjErrNPortID = NULL; + } + if (phba->debug_InjErrWWPN) { + debugfs_remove(phba->debug_InjErrWWPN); /* InjErrWWPN */ + phba->debug_InjErrWWPN = NULL; + } if (phba->debug_writeGuard) { debugfs_remove(phba->debug_writeGuard); /* writeGuard */ phba->debug_writeGuard = NULL; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 8db2fb3b45ec..3407b39e0a3f 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -925,9 +925,17 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, * due to new FCF discovery */ if ((phba->hba_flag & HBA_FIP_SUPPORT) && - (phba->fcf.fcf_flag & FCF_DISCOVERY) && - !((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && - (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))) { + (phba->fcf.fcf_flag & FCF_DISCOVERY)) { + if (phba->link_state < LPFC_LINK_UP) + goto stop_rr_fcf_flogi; + if ((phba->fcoe_cvl_eventtag_attn == + phba->fcoe_cvl_eventtag) && + (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && + (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED)) + goto stop_rr_fcf_flogi; + else + phba->fcoe_cvl_eventtag_attn = + phba->fcoe_cvl_eventtag; lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS, "2611 FLOGI failed on FCF (x%x), " "status:x%x/x%x, tmo:x%x, perform " @@ -943,6 +951,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, goto out; } +stop_rr_fcf_flogi: /* FLOGI failure */ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, "2858 FLOGI failure Status:x%x/x%x TMO:x%x\n", diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 343d87ba4df8..b507536dc5b5 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -2843,7 +2843,14 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) struct lpfc_vport *vport = mboxq->vport; struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - if (mboxq->u.mb.mbxStatus) { + /* + * VFI not supported for interface type 0, so ignore any mailbox + * error (except VFI in use) and continue with the discovery. + */ + if (mboxq->u.mb.mbxStatus && + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_0) && + mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, "2018 REG_VFI mbxStatus error x%x " "HBA state x%x\n", @@ -5673,14 +5680,13 @@ lpfc_fcf_inuse(struct lpfc_hba *phba) ret = 1; spin_unlock_irq(shost->host_lock); goto out; - } else { + } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { + ret = 1; lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "2624 RPI %x DID %x flg %x still " - "logged in\n", - ndlp->nlp_rpi, ndlp->nlp_DID, - ndlp->nlp_flag); - if (ndlp->nlp_flag & NLP_RPI_REGISTERED) - ret = 1; + "2624 RPI %x DID %x flag %x " + "still logged in\n", + ndlp->nlp_rpi, ndlp->nlp_DID, + ndlp->nlp_flag); } } spin_unlock_irq(shost->host_lock); diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 9e2b9b227e1a..91f09761bd32 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2009 Emulex. All rights reserved. * + * Copyright (C) 2009-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -338,6 +338,12 @@ struct lpfc_cqe { #define CQE_CODE_XRI_ABORTED 0x5 #define CQE_CODE_RECEIVE_V1 0x9 +/* + * Define mask value for xri_aborted and wcqe completed CQE extended status. + * Currently, extended status is limited to 9 bits (0x0 -> 0x103) . + */ +#define WCQE_PARAM_MASK 0x1FF; + /* completion queue entry for wqe completions */ struct lpfc_wcqe_complete { uint32_t word0; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index b38f99f3be32..9598fdcb08ab 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -2704,16 +2704,14 @@ lpfc_offline_prep(struct lpfc_hba * phba) } spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NPR_ADISC; - + spin_unlock_irq(shost->host_lock); /* * Whenever an SLI4 port goes offline, free the - * RPI. A new RPI when the adapter port comes - * back online. + * RPI. Get a new RPI when the adapter port + * comes back online. */ if (phba->sli_rev == LPFC_SLI_REV4) lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi); - - spin_unlock_irq(shost->host_lock); lpfc_unreg_rpi(vports[i], ndlp); } } @@ -2786,9 +2784,13 @@ lpfc_scsi_buf_update(struct lpfc_hba *phba) spin_lock_irq(&phba->hbalock); spin_lock(&phba->scsi_buf_list_lock); - list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) + list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) { sb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag]; + set_bit(sb->cur_iocbq.sli4_lxritag, phba->sli4_hba.xri_bmask); + phba->sli4_hba.max_cfg_param.xri_used++; + phba->sli4_hba.xri_count++; + } spin_unlock(&phba->scsi_buf_list_lock); spin_unlock_irq(&phba->hbalock); return 0; @@ -3723,6 +3725,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba, break; case LPFC_FIP_EVENT_TYPE_FCF_DEAD: + phba->fcoe_cvl_eventtag = acqe_fip->event_tag; lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY, "2549 FCF (x%x) disconnected from network, " "tag:x%x\n", acqe_fip->index, acqe_fip->event_tag); @@ -3784,6 +3787,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba, } break; case LPFC_FIP_EVENT_TYPE_CVL: + phba->fcoe_cvl_eventtag = acqe_fip->event_tag; lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY, "2718 Clear Virtual Link Received for VPI 0x%x" " tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag); @@ -5226,8 +5230,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) * rpi is normalized to a zero base because the physical rpi is * port based. */ - curr_rpi_range = phba->sli4_hba.next_rpi - - phba->sli4_hba.max_cfg_param.rpi_base; + curr_rpi_range = phba->sli4_hba.next_rpi; spin_unlock_irq(&phba->hbalock); /* @@ -5818,10 +5821,9 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba) readl(phba->sli4_hba.u.if_type2. ERR2regaddr); lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2888 Port Error Detected " - "during POST: " - "port status reg 0x%x, " - "port_smphr reg 0x%x, " + "2888 Unrecoverable port error " + "following POST: port status reg " + "0x%x, port_smphr reg 0x%x, " "error 1=0x%x, error 2=0x%x\n", reg_data.word0, portsmphr_reg.word0, @@ -6142,7 +6144,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base; phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base; phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base; - phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base; phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ? (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0; phba->max_vports = phba->max_vpi; @@ -7231,6 +7232,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) uint32_t rdy_chk, num_resets = 0, reset_again = 0; union lpfc_sli4_cfg_shdr *shdr; struct lpfc_register reg_data; + uint16_t devid; if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); switch (if_type) { @@ -7277,7 +7279,9 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) LPFC_SLIPORT_INIT_PORT); writel(reg_data.word0, phba->sli4_hba.u.if_type2. CTRLregaddr); - + /* flush */ + pci_read_config_word(phba->pcidev, + PCI_DEVICE_ID, &devid); /* * Poll the Port Status Register and wait for RDY for * up to 10 seconds. If the port doesn't respond, treat @@ -7315,11 +7319,10 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) phba->work_status[1] = readl( phba->sli4_hba.u.if_type2.ERR2regaddr); lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2890 Port Error Detected " - "during Port Reset: " - "port status reg 0x%x, " + "2890 Port error detected during port " + "reset(%d): port status reg 0x%x, " "error 1=0x%x, error 2=0x%x\n", - reg_data.word0, + num_resets, reg_data.word0, phba->work_status[0], phba->work_status[1]); rc = -ENODEV; diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 7b6b2aa5795a..15ca2a9a0cdd 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2009 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -440,11 +440,15 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, spin_unlock_irq(shost->host_lock); stat.un.b.lsRjtRsnCode = LSRJT_INVALID_CMD; stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE; - lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, + rc = lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, mbox); + if (rc) + mempool_free(mbox, phba->mbox_mem_pool); return 1; } - lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox); + rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox); + if (rc) + mempool_free(mbox, phba->mbox_mem_pool); return 1; out: stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index efc055b6bac4..88f3a83dbd2e 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -39,8 +39,8 @@ #include "lpfc_sli4.h" #include "lpfc_nl.h" #include "lpfc_disc.h" -#include "lpfc_scsi.h" #include "lpfc.h" +#include "lpfc_scsi.h" #include "lpfc_logmsg.h" #include "lpfc_crtn.h" #include "lpfc_vport.h" @@ -51,13 +51,19 @@ int _dump_buf_done; static char *dif_op_str[] = { - "SCSI_PROT_NORMAL", - "SCSI_PROT_READ_INSERT", - "SCSI_PROT_WRITE_STRIP", - "SCSI_PROT_READ_STRIP", - "SCSI_PROT_WRITE_INSERT", - "SCSI_PROT_READ_PASS", - "SCSI_PROT_WRITE_PASS", + "PROT_NORMAL", + "PROT_READ_INSERT", + "PROT_WRITE_STRIP", + "PROT_READ_STRIP", + "PROT_WRITE_INSERT", + "PROT_READ_PASS", + "PROT_WRITE_PASS", +}; + +static char *dif_grd_str[] = { + "NO_GUARD", + "DIF_CRC", + "DIX_IP", }; struct scsi_dif_tuple { @@ -1281,10 +1287,14 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) #ifdef CONFIG_SCSI_LPFC_DEBUG_FS -#define BG_ERR_INIT 1 -#define BG_ERR_TGT 2 -#define BG_ERR_SWAP 3 -#define BG_ERR_CHECK 4 +/* Return if if error injection is detected by Initiator */ +#define BG_ERR_INIT 0x1 +/* Return if if error injection is detected by Target */ +#define BG_ERR_TGT 0x2 +/* Return if if swapping CSUM<-->CRC is required for error injection */ +#define BG_ERR_SWAP 0x10 +/* Return if disabling Guard/Ref/App checking is required for error injection */ +#define BG_ERR_CHECK 0x20 /** * lpfc_bg_err_inject - Determine if we should inject an error @@ -1294,10 +1304,7 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) * @apptag: (out) BlockGuard application tag for transmitted data * @new_guard (in) Value to replace CRC with if needed * - * Returns (1) if error injection is detected by Initiator - * Returns (2) if error injection is detected by Target - * Returns (3) if swapping CSUM->CRC is required for error injection - * Returns (4) disabling Guard/Ref/App checking is required for error injection + * Returns BG_ERR_* bit mask or 0 if request ignored **/ static int lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, @@ -1305,7 +1312,10 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, { struct scatterlist *sgpe; /* s/g prot entry */ struct scatterlist *sgde; /* s/g data entry */ + struct lpfc_scsi_buf *lpfc_cmd = NULL; struct scsi_dif_tuple *src = NULL; + struct lpfc_nodelist *ndlp; + struct lpfc_rport_data *rdata; uint32_t op = scsi_get_prot_op(sc); uint32_t blksize; uint32_t numblks; @@ -1318,8 +1328,9 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, sgpe = scsi_prot_sglist(sc); sgde = scsi_sglist(sc); - lba = scsi_get_lba(sc); + + /* First check if we need to match the LBA */ if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) { blksize = lpfc_cmd_blksize(sc); numblks = (scsi_bufflen(sc) + blksize - 1) / blksize; @@ -1334,66 +1345,123 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, sizeof(struct scsi_dif_tuple); if (numblks < blockoff) blockoff = numblks; - src = (struct scsi_dif_tuple *)sg_virt(sgpe); - src += blockoff; } } + /* Next check if we need to match the remote NPortID or WWPN */ + rdata = sc->device->hostdata; + if (rdata && rdata->pnode) { + ndlp = rdata->pnode; + + /* Make sure we have the right NPortID if one is specified */ + if (phba->lpfc_injerr_nportid && + (phba->lpfc_injerr_nportid != ndlp->nlp_DID)) + return 0; + + /* + * Make sure we have the right WWPN if one is specified. + * wwn[0] should be a non-zero NAA in a good WWPN. + */ + if (phba->lpfc_injerr_wwpn.u.wwn[0] && + (memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn, + sizeof(struct lpfc_name)) != 0)) + return 0; + } + + /* Setup a ptr to the protection data if the SCSI host provides it */ + if (sgpe) { + src = (struct scsi_dif_tuple *)sg_virt(sgpe); + src += blockoff; + lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble; + } + /* Should we change the Reference Tag */ if (reftag) { if (phba->lpfc_injerr_wref_cnt) { switch (op) { case SCSI_PROT_WRITE_PASS: - if (blockoff && src) { - /* Insert error in middle of the IO */ + if (src) { + /* + * For WRITE_PASS, force the error + * to be sent on the wire. It should + * be detected by the Target. + * If blockoff != 0 error will be + * inserted in middle of the IO. + */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9076 BLKGRD: Injecting reftag error: " "write lba x%lx + x%x oldrefTag x%x\n", (unsigned long)lba, blockoff, - src->ref_tag); + be32_to_cpu(src->ref_tag)); /* - * NOTE, this will change ref tag in - * the memory location forever! + * Save the old ref_tag so we can + * restore it on completion. */ - src->ref_tag = 0xDEADBEEF; + if (lpfc_cmd) { + lpfc_cmd->prot_data_type = + LPFC_INJERR_REFTAG; + lpfc_cmd->prot_data_segment = + src; + lpfc_cmd->prot_data = + src->ref_tag; + } + src->ref_tag = cpu_to_be32(0xDEADBEEF); phba->lpfc_injerr_wref_cnt--; - phba->lpfc_injerr_lba = - LPFC_INJERR_LBA_OFF; - rc = BG_ERR_CHECK; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; + break; } /* Drop thru */ - case SCSI_PROT_WRITE_STRIP: + case SCSI_PROT_WRITE_INSERT: /* - * For WRITE_STRIP and WRITE_PASS, - * force the error on data - * being copied from SLI-Host to SLI-Port. + * For WRITE_INSERT, force the error + * to be sent on the wire. It should be + * detected by the Target. */ + /* DEADBEEF will be the reftag on the wire */ *reftag = 0xDEADBEEF; phba->lpfc_injerr_wref_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = BG_ERR_INIT; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9077 BLKGRD: Injecting reftag error: " + "9078 BLKGRD: Injecting reftag error: " "write lba x%lx\n", (unsigned long)lba); break; - case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_WRITE_STRIP: /* - * For WRITE_INSERT, force the - * error to be sent on the wire. It should be - * detected by the Target. + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. */ - /* DEADBEEF will be the reftag on the wire */ *reftag = 0xDEADBEEF; phba->lpfc_injerr_wref_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = BG_ERR_TGT; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9078 BLKGRD: Injecting reftag error: " + "9077 BLKGRD: Injecting reftag error: " "write lba x%lx\n", (unsigned long)lba); break; } @@ -1401,11 +1469,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_rref_cnt) { switch (op) { case SCSI_PROT_READ_INSERT: - /* - * For READ_INSERT, it doesn't make sense - * to change the reftag. - */ - break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_READ_PASS: /* @@ -1415,7 +1478,13 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, */ *reftag = 0xDEADBEEF; phba->lpfc_injerr_rref_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_rref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, @@ -1431,56 +1500,87 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_wapp_cnt) { switch (op) { case SCSI_PROT_WRITE_PASS: - if (blockoff && src) { - /* Insert error in middle of the IO */ + if (src) { + /* + * For WRITE_PASS, force the error + * to be sent on the wire. It should + * be detected by the Target. + * If blockoff != 0 error will be + * inserted in middle of the IO. + */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9080 BLKGRD: Injecting apptag error: " "write lba x%lx + x%x oldappTag x%x\n", (unsigned long)lba, blockoff, - src->app_tag); + be16_to_cpu(src->app_tag)); /* - * NOTE, this will change app tag in - * the memory location forever! + * Save the old app_tag so we can + * restore it on completion. */ - src->app_tag = 0xDEAD; + if (lpfc_cmd) { + lpfc_cmd->prot_data_type = + LPFC_INJERR_APPTAG; + lpfc_cmd->prot_data_segment = + src; + lpfc_cmd->prot_data = + src->app_tag; + } + src->app_tag = cpu_to_be16(0xDEAD); phba->lpfc_injerr_wapp_cnt--; - phba->lpfc_injerr_lba = - LPFC_INJERR_LBA_OFF; - rc = BG_ERR_CHECK; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; break; } /* Drop thru */ - case SCSI_PROT_WRITE_STRIP: + case SCSI_PROT_WRITE_INSERT: /* - * For WRITE_STRIP and WRITE_PASS, - * force the error on data - * being copied from SLI-Host to SLI-Port. + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. */ + /* DEAD will be the apptag on the wire */ *apptag = 0xDEAD; phba->lpfc_injerr_wapp_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = BG_ERR_INIT; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0812 BLKGRD: Injecting apptag error: " + "0813 BLKGRD: Injecting apptag error: " "write lba x%lx\n", (unsigned long)lba); break; - case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_WRITE_STRIP: /* - * For WRITE_INSERT, force the - * error to be sent on the wire. It should be - * detected by the Target. + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. */ - /* DEAD will be the apptag on the wire */ *apptag = 0xDEAD; phba->lpfc_injerr_wapp_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = BG_ERR_TGT; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0813 BLKGRD: Injecting apptag error: " + "0812 BLKGRD: Injecting apptag error: " "write lba x%lx\n", (unsigned long)lba); break; } @@ -1488,11 +1588,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_rapp_cnt) { switch (op) { case SCSI_PROT_READ_INSERT: - /* - * For READ_INSERT, it doesn't make sense - * to change the apptag. - */ - break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_READ_PASS: /* @@ -1502,7 +1597,13 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, */ *apptag = 0xDEAD; phba->lpfc_injerr_rapp_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_rapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, @@ -1519,57 +1620,51 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_wgrd_cnt) { switch (op) { case SCSI_PROT_WRITE_PASS: - if (blockoff && src) { - /* Insert error in middle of the IO */ - - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0815 BLKGRD: Injecting guard error: " - "write lba x%lx + x%x oldgrdTag x%x\n", - (unsigned long)lba, blockoff, - src->guard_tag); - - /* - * NOTE, this will change guard tag in - * the memory location forever! - */ - src->guard_tag = 0xDEAD; - phba->lpfc_injerr_wgrd_cnt--; - phba->lpfc_injerr_lba = - LPFC_INJERR_LBA_OFF; - rc = BG_ERR_CHECK; - break; - } + rc = BG_ERR_CHECK; /* Drop thru */ - case SCSI_PROT_WRITE_STRIP: + + case SCSI_PROT_WRITE_INSERT: /* - * For WRITE_STRIP and WRITE_PASS, - * force the error on data - * being copied from SLI-Host to SLI-Port. + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. */ phba->lpfc_injerr_wgrd_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_wgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } - rc = BG_ERR_SWAP; + rc |= BG_ERR_TGT | BG_ERR_SWAP; /* Signals the caller to swap CRC->CSUM */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0816 BLKGRD: Injecting guard error: " + "0817 BLKGRD: Injecting guard error: " "write lba x%lx\n", (unsigned long)lba); break; - case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_WRITE_STRIP: /* - * For WRITE_INSERT, force the - * error to be sent on the wire. It should be - * detected by the Target. + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. */ phba->lpfc_injerr_wgrd_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_wgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } - rc = BG_ERR_SWAP; + rc = BG_ERR_INIT | BG_ERR_SWAP; /* Signals the caller to swap CRC->CSUM */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0817 BLKGRD: Injecting guard error: " + "0816 BLKGRD: Injecting guard error: " "write lba x%lx\n", (unsigned long)lba); break; } @@ -1577,11 +1672,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_rgrd_cnt) { switch (op) { case SCSI_PROT_READ_INSERT: - /* - * For READ_INSERT, it doesn't make sense - * to change the guard tag. - */ - break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_READ_PASS: /* @@ -1589,11 +1679,16 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, * error on data being read off the wire. It * should force an IO error to the driver. */ - *apptag = 0xDEAD; phba->lpfc_injerr_rgrd_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_rgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } - rc = BG_ERR_SWAP; + rc = BG_ERR_INIT | BG_ERR_SWAP; /* Signals the caller to swap CRC->CSUM */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, @@ -1629,20 +1724,20 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - *txop = BG_OP_IN_CSUM_OUT_NODIF; *rxop = BG_OP_IN_NODIF_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_NODIF; break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - *txop = BG_OP_IN_NODIF_OUT_CRC; *rxop = BG_OP_IN_CRC_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CRC; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - *txop = BG_OP_IN_CSUM_OUT_CRC; *rxop = BG_OP_IN_CRC_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_CRC; break; case SCSI_PROT_NORMAL: @@ -1658,20 +1753,20 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - *txop = BG_OP_IN_NODIF_OUT_CRC; *rxop = BG_OP_IN_CRC_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CRC; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - *txop = BG_OP_IN_CRC_OUT_CRC; *rxop = BG_OP_IN_CRC_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_CRC; break; case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - *txop = BG_OP_IN_CRC_OUT_NODIF; *rxop = BG_OP_IN_NODIF_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_NODIF; break; case SCSI_PROT_NORMAL: @@ -1710,20 +1805,20 @@ lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - *txop = BG_OP_IN_CRC_OUT_NODIF; *rxop = BG_OP_IN_NODIF_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_NODIF; break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - *txop = BG_OP_IN_NODIF_OUT_CSUM; *rxop = BG_OP_IN_CSUM_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CSUM; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - *txop = BG_OP_IN_CRC_OUT_CRC; - *rxop = BG_OP_IN_CRC_OUT_CRC; + *rxop = BG_OP_IN_CSUM_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_CSUM; break; case SCSI_PROT_NORMAL: @@ -1735,20 +1830,20 @@ lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - *txop = BG_OP_IN_NODIF_OUT_CSUM; *rxop = BG_OP_IN_CSUM_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CSUM; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - *txop = BG_OP_IN_CSUM_OUT_CRC; - *rxop = BG_OP_IN_CRC_OUT_CSUM; + *rxop = BG_OP_IN_CSUM_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_CSUM; break; case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - *txop = BG_OP_IN_CSUM_OUT_NODIF; *rxop = BG_OP_IN_NODIF_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_NODIF; break; case SCSI_PROT_NORMAL: @@ -1817,11 +1912,11 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); if (rc) { - if (rc == BG_ERR_SWAP) + if (rc & BG_ERR_SWAP) lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); - if (rc == BG_ERR_CHECK) + if (rc & BG_ERR_CHECK) checking = 0; } #endif @@ -1964,11 +2059,11 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); if (rc) { - if (rc == BG_ERR_SWAP) + if (rc & BG_ERR_SWAP) lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); - if (rc == BG_ERR_CHECK) + if (rc & BG_ERR_CHECK) checking = 0; } #endif @@ -2172,11 +2267,11 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); if (rc) { - if (rc == BG_ERR_SWAP) + if (rc & BG_ERR_SWAP) lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); - if (rc == BG_ERR_CHECK) + if (rc & BG_ERR_CHECK) checking = 0; } #endif @@ -2312,11 +2407,11 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); if (rc) { - if (rc == BG_ERR_SWAP) + if (rc & BG_ERR_SWAP) lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); - if (rc == BG_ERR_CHECK) + if (rc & BG_ERR_CHECK) checking = 0; } #endif @@ -2788,7 +2883,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, /* No error was reported - problem in FW? */ cmd->result = ScsiResult(DID_ERROR, 0); lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9057 BLKGRD: no errors reported!\n"); + "9057 BLKGRD: Unknown error reported!\n"); } out: @@ -3460,6 +3555,37 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, /* pick up SLI4 exhange busy status from HBA */ lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY; +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + if (lpfc_cmd->prot_data_type) { + struct scsi_dif_tuple *src = NULL; + + src = (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment; + /* + * Used to restore any changes to protection + * data for error injection. + */ + switch (lpfc_cmd->prot_data_type) { + case LPFC_INJERR_REFTAG: + src->ref_tag = + lpfc_cmd->prot_data; + break; + case LPFC_INJERR_APPTAG: + src->app_tag = + (uint16_t)lpfc_cmd->prot_data; + break; + case LPFC_INJERR_GUARD: + src->guard_tag = + (uint16_t)lpfc_cmd->prot_data; + break; + default: + break; + } + + lpfc_cmd->prot_data = 0; + lpfc_cmd->prot_data_type = 0; + lpfc_cmd->prot_data_segment = NULL; + } +#endif if (pnode && NLP_CHK_NODE_ACT(pnode)) atomic_dec(&pnode->cmd_pending); @@ -4061,15 +4187,6 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) cmnd->result = err; goto out_fail_command; } - /* - * Do not let the mid-layer retry I/O too fast. If an I/O is retried - * without waiting a bit then indicate that the device is busy. - */ - if (cmnd->retries && - time_before(jiffies, (cmnd->jiffies_at_alloc + - msecs_to_jiffies(LPFC_RETRY_PAUSE * - cmnd->retries)))) - return SCSI_MLQUEUE_DEVICE_BUSY; ndlp = rdata->pnode; if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) && @@ -4119,63 +4236,48 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) { if (vport->phba->cfg_enable_bg) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9033 BLKGRD: rcvd protected cmd:%02x op:%02x " - "str=%s\n", - cmnd->cmnd[0], scsi_get_prot_op(cmnd), - dif_op_str[scsi_get_prot_op(cmnd)]); - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x\n", - cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2], - cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5], - cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8], - cmnd->cmnd[9]); + "9033 BLKGRD: rcvd protected cmd:%02x op=%s " + "guard=%s\n", cmnd->cmnd[0], + dif_op_str[scsi_get_prot_op(cmnd)], + dif_grd_str[scsi_host_get_guard(shost)]); if (cmnd->cmnd[0] == READ_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9035 BLKGRD: READ @ sector %llu, " - "count %u\n", + "cnt %u, rpt %d\n", (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request)); + blk_rq_sectors(cmnd->request), + (cmnd->cmnd[1]>>5)); else if (cmnd->cmnd[0] == WRITE_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9036 BLKGRD: WRITE @ sector %llu, " - "count %u cmd=%p\n", + "cnt %u, wpt %d\n", (unsigned long long)scsi_get_lba(cmnd), blk_rq_sectors(cmnd->request), - cmnd); + (cmnd->cmnd[1]>>5)); } err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); } else { if (vport->phba->cfg_enable_bg) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9038 BLKGRD: rcvd unprotected cmd:" - "%02x op:%02x str=%s\n", - cmnd->cmnd[0], scsi_get_prot_op(cmnd), - dif_op_str[scsi_get_prot_op(cmnd)]); - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9039 BLKGRD: CDB: %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x %02x\n", - cmnd->cmnd[0], cmnd->cmnd[1], - cmnd->cmnd[2], cmnd->cmnd[3], - cmnd->cmnd[4], cmnd->cmnd[5], - cmnd->cmnd[6], cmnd->cmnd[7], - cmnd->cmnd[8], cmnd->cmnd[9]); + "9038 BLKGRD: rcvd unprotected cmd:" + "%02x op=%s guard=%s\n", cmnd->cmnd[0], + dif_op_str[scsi_get_prot_op(cmnd)], + dif_grd_str[scsi_host_get_guard(shost)]); if (cmnd->cmnd[0] == READ_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9040 dbg: READ @ sector %llu, " - "count %u\n", + "cnt %u, rpt %d\n", (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request)); + blk_rq_sectors(cmnd->request), + (cmnd->cmnd[1]>>5)); else if (cmnd->cmnd[0] == WRITE_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9041 dbg: WRITE @ sector %llu, " - "count %u cmd=%p\n", - (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request), cmnd); - else - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9042 dbg: parser not implemented\n"); + "9041 dbg: WRITE @ sector %llu, " + "cnt %u, wpt %d\n", + (unsigned long long)scsi_get_lba(cmnd), + blk_rq_sectors(cmnd->request), + (cmnd->cmnd[1]>>5)); } err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd); } diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h index 9075a08cf781..21a2ffe67eac 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.h +++ b/drivers/scsi/lpfc/lpfc_scsi.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2006 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -150,9 +150,18 @@ struct lpfc_scsi_buf { struct lpfc_iocbq cur_iocbq; wait_queue_head_t *waitq; unsigned long start_time; + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + /* Used to restore any changes to protection data for error injection */ + void *prot_data_segment; + uint32_t prot_data; + uint32_t prot_data_type; +#define LPFC_INJERR_REFTAG 1 +#define LPFC_INJERR_APPTAG 2 +#define LPFC_INJERR_GUARD 3 +#endif }; #define LPFC_SCSI_DMA_EXT_SIZE 264 #define LPFC_BPL_SIZE 1024 -#define LPFC_RETRY_PAUSE 300 #define MDAC_DIRECT_CMD 0x22 diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index e0e4d8d18244..dbaf5b963bff 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -5578,8 +5578,6 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) for (i = 0; i < count; i++) phba->sli4_hba.rpi_ids[i] = base + i; - lpfc_sli4_node_prep(phba); - /* VPIs. */ count = phba->sli4_hba.max_cfg_param.max_vpi; base = phba->sli4_hba.max_cfg_param.vpi_base; @@ -5613,6 +5611,8 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) rc = -ENOMEM; goto free_vpi_ids; } + phba->sli4_hba.max_cfg_param.xri_used = 0; + phba->sli4_hba.xri_count = 0; phba->sli4_hba.xri_ids = kzalloc(count * sizeof(uint16_t), GFP_KERNEL); @@ -6147,6 +6147,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) rc = -ENODEV; goto out_free_mbox; } + lpfc_sli4_node_prep(phba); /* Create all the SLI4 queues */ rc = lpfc_sli4_queue_create(phba); @@ -7251,11 +7252,13 @@ lpfc_sli4_post_async_mbox(struct lpfc_hba *phba) out_not_finished: spin_lock_irqsave(&phba->hbalock, iflags); - mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED; - __lpfc_mbox_cmpl_put(phba, mboxq); - /* Release the token */ - psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; - phba->sli.mbox_active = NULL; + if (phba->sli.mbox_active) { + mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED; + __lpfc_mbox_cmpl_put(phba, mboxq); + /* Release the token */ + psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; + phba->sli.mbox_active = NULL; + } spin_unlock_irqrestore(&phba->hbalock, iflags); return MBX_NOT_FINISHED; @@ -7743,6 +7746,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, if (pcmd && (*pcmd == ELS_CMD_FLOGI || *pcmd == ELS_CMD_SCR || *pcmd == ELS_CMD_FDISC || + *pcmd == ELS_CMD_LOGO || *pcmd == ELS_CMD_PLOGI)) { bf_set(els_req64_sp, &wqe->els_req, 1); bf_set(els_req64_sid, &wqe->els_req, @@ -8385,6 +8389,7 @@ lpfc_sli4_abts_err_handler(struct lpfc_hba *phba, struct sli4_wcqe_xri_aborted *axri) { struct lpfc_vport *vport; + uint32_t ext_status = 0; if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { lpfc_printf_log(phba, KERN_INFO, LOG_SLI, @@ -8396,12 +8401,20 @@ lpfc_sli4_abts_err_handler(struct lpfc_hba *phba, vport = ndlp->vport; lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "3116 Port generated FCP XRI ABORT event on " - "vpi %d rpi %d xri x%x status 0x%x\n", + "vpi %d rpi %d xri x%x status 0x%x parameter x%x\n", ndlp->vport->vpi, ndlp->nlp_rpi, bf_get(lpfc_wcqe_xa_xri, axri), - bf_get(lpfc_wcqe_xa_status, axri)); + bf_get(lpfc_wcqe_xa_status, axri), + axri->parameter); - if (bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT) + /* + * Catch the ABTS protocol failure case. Older OCe FW releases returned + * LOCAL_REJECT and 0 for a failed ABTS exchange and later OCe and + * LPe FW releases returned LOCAL_REJECT and SEQUENCE_TIMEOUT. + */ + ext_status = axri->parameter & WCQE_PARAM_MASK; + if ((bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT) && + ((ext_status == IOERR_SEQUENCE_TIMEOUT) || (ext_status == 0))) lpfc_sli_abts_recover_port(vport, ndlp); } @@ -9807,12 +9820,11 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba) unsigned long timeout; timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; + spin_lock_irq(&phba->hbalock); psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK; - spin_unlock_irq(&phba->hbalock); if (psli->sli_flag & LPFC_SLI_ACTIVE) { - spin_lock_irq(&phba->hbalock); /* Determine how long we might wait for the active mailbox * command to be gracefully completed by firmware. */ @@ -9831,7 +9843,9 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba) */ break; } - } + } else + spin_unlock_irq(&phba->hbalock); + lpfc_sli_mbox_sys_flush(phba); } @@ -13272,7 +13286,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba) LPFC_MBOXQ_t *mbox; uint32_t reqlen, alloclen, index; uint32_t mbox_tmo; - uint16_t rsrc_start, rsrc_size, els_xri_cnt; + uint16_t rsrc_start, rsrc_size, els_xri_cnt, post_els_xri_cnt; uint16_t xritag_start = 0, lxri = 0; struct lpfc_rsrc_blks *rsrc_blk; int cnt, ttl_cnt, rc = 0; @@ -13294,6 +13308,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba) cnt = 0; ttl_cnt = 0; + post_els_xri_cnt = els_xri_cnt; list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list, list) { rsrc_start = rsrc_blk->rsrc_start; @@ -13303,11 +13318,12 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba) "3014 Working ELS Extent start %d, cnt %d\n", rsrc_start, rsrc_size); - loop_cnt = min(els_xri_cnt, rsrc_size); - if (ttl_cnt + loop_cnt >= els_xri_cnt) { - loop_cnt = els_xri_cnt - ttl_cnt; - ttl_cnt = els_xri_cnt; - } + loop_cnt = min(post_els_xri_cnt, rsrc_size); + if (loop_cnt < post_els_xri_cnt) { + post_els_xri_cnt -= loop_cnt; + ttl_cnt += loop_cnt; + } else + ttl_cnt += post_els_xri_cnt; mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) @@ -14203,15 +14219,14 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba, * field and RX_ID from ABTS for RX_ID field. */ bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_RSP); - bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid); } else { /* ABTS sent by initiator to CT exchange, construction * of BA_ACC will need to allocate a new XRI as for the - * XRI_TAG and RX_ID fields. + * XRI_TAG field. */ bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_INT); - bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, NO_XRI); } + bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid); bf_set(lpfc_abts_oxid, &icmd->un.bls_rsp, oxid); /* Xmit CT abts response on exchange <xid> */ @@ -15042,6 +15057,7 @@ lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index) LPFC_MBOXQ_t *mboxq; phba->fcoe_eventtag_at_fcf_scan = phba->fcoe_eventtag; + phba->fcoe_cvl_eventtag_attn = phba->fcoe_cvl_eventtag; mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mboxq) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index f2a2602e5c35..25cefc254b76 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.29" +#define LPFC_DRIVER_VERSION "8.3.30" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" #define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 5e69f468535f..8a59a772fdf2 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -657,7 +657,7 @@ _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info) return; /* eat the loginfos associated with task aborts */ - if (ioc->ignore_loginfos && (log_info == 30050000 || log_info == + if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info == 0x31140000 || log_info == 0x31130000)) return; @@ -2060,12 +2060,10 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) { int i = 0; char desc[16]; - u8 revision; u32 iounit_pg1_flags; u32 bios_version; bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); - pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); strncpy(desc, ioc->manu_pg0.ChipName, 16); printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), " "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", @@ -2074,7 +2072,7 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, ioc->facts.FWVersion.Word & 0x000000FF, - revision, + ioc->pdev->revision, (bios_version & 0xFF000000) >> 24, (bios_version & 0x00FF0000) >> 16, (bios_version & 0x0000FF00) >> 8, diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 7fceb899029e..3b9a28efea82 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -1026,7 +1026,6 @@ _ctl_getiocinfo(void __user *arg) { struct mpt2_ioctl_iocinfo karg; struct MPT2SAS_ADAPTER *ioc; - u8 revision; if (copy_from_user(&karg, arg, sizeof(karg))) { printk(KERN_ERR "failure at %s:%d/%s()!\n", @@ -1046,8 +1045,7 @@ _ctl_getiocinfo(void __user *arg) karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2; if (ioc->pfacts) karg.port_number = ioc->pfacts[0].PortNumber; - pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); - karg.hw_rev = revision; + karg.hw_rev = ioc->pdev->revision; karg.pci_id = ioc->pdev->device; karg.subsystem_device = ioc->pdev->subsystem_device; karg.subsystem_vendor = ioc->pdev->subsystem_vendor; diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 3619f6eeeeda..9d82ee5c10de 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2093,6 +2093,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) struct ata_task_resp *resp ; u32 *sata_resp; struct pm8001_device *pm8001_dev; + unsigned long flags; psataPayload = (struct sata_completion_resp *)(piomb + 4); status = le32_to_cpu(psataPayload->status); @@ -2382,26 +2383,26 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_DEV_NO_RESPONSE; break; } - spin_lock_irq(&t->task_state_lock); + spin_lock_irqsave(&t->task_state_lock, flags); t->task_state_flags &= ~SAS_TASK_STATE_PENDING; t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with io_status 0x%x" " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, status, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else if (t->uldd_task) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); spin_lock_irq(&pm8001_ha->lock); } else if (!t->uldd_task) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ spin_unlock_irq(&pm8001_ha->lock); @@ -2423,6 +2424,7 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) u32 tag = le32_to_cpu(psataPayload->tag); u32 port_id = le32_to_cpu(psataPayload->port_id); u32 dev_id = le32_to_cpu(psataPayload->device_id); + unsigned long flags; ccb = &pm8001_ha->ccb_info[tag]; t = ccb->task; @@ -2593,26 +2595,26 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) ts->stat = SAS_OPEN_TO; break; } - spin_lock_irq(&t->task_state_lock); + spin_lock_irqsave(&t->task_state_lock, flags); t->task_state_flags &= ~SAS_TASK_STATE_PENDING; t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with io_status 0x%x" " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, event, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else if (t->uldd_task) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); spin_lock_irq(&pm8001_ha->lock); } else if (!t->uldd_task) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ spin_unlock_irq(&pm8001_ha->lock); diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 7c9f28b7da72..fc542a9bb106 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -431,9 +431,9 @@ static void qla4xxx_mbox_status_entry(struct scsi_qla_host *ha, mbox_sts_entry->out_mbox[6])); if (mbox_sts_entry->out_mbox[0] == MBOX_STS_COMMAND_COMPLETE) - status = QLA_SUCCESS; + status = ISCSI_PING_SUCCESS; else - status = QLA_ERROR; + status = mbox_sts_entry->out_mbox[6]; data_size = sizeof(mbox_sts_entry->out_mbox); diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 3d9419460e0c..ee47820c30a6 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -834,7 +834,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc) static void qla4xxx_set_port_speed(struct Scsi_Host *shost) { struct scsi_qla_host *ha = to_qla_host(shost); - struct iscsi_cls_host *ihost = shost_priv(shost); + struct iscsi_cls_host *ihost = shost->shost_data; uint32_t speed = ISCSI_PORT_SPEED_UNKNOWN; qla4xxx_get_firmware_state(ha); @@ -859,7 +859,7 @@ static void qla4xxx_set_port_speed(struct Scsi_Host *shost) static void qla4xxx_set_port_state(struct Scsi_Host *shost) { struct scsi_qla_host *ha = to_qla_host(shost); - struct iscsi_cls_host *ihost = shost_priv(shost); + struct iscsi_cls_host *ihost = shost->shost_data; uint32_t state = ISCSI_PORT_STATE_DOWN; if (test_bit(AF_LINK_UP, &ha->flags)) @@ -3445,7 +3445,6 @@ static void qla4xxx_free_adapter(struct scsi_qla_host *ha) int qla4_8xxx_iospace_config(struct scsi_qla_host *ha) { int status = 0; - uint8_t revision_id; unsigned long mem_base, mem_len, db_base, db_len; struct pci_dev *pdev = ha->pdev; @@ -3457,10 +3456,9 @@ int qla4_8xxx_iospace_config(struct scsi_qla_host *ha) goto iospace_error_exit; } - pci_read_config_byte(pdev, PCI_REVISION_ID, &revision_id); DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n", - __func__, revision_id)); - ha->revision_id = revision_id; + __func__, pdev->revision)); + ha->revision_id = pdev->revision; /* remap phys address */ mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */ diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index ede9af944141..97b30c108e36 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k15" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k16" diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 591856131c4e..182d5a57ab74 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -101,6 +101,7 @@ static const char * scsi_debug_version_date = "20100324"; #define DEF_LBPU 0 #define DEF_LBPWS 0 #define DEF_LBPWS10 0 +#define DEF_LBPRZ 1 #define DEF_LOWEST_ALIGNED 0 #define DEF_NO_LUN_0 0 #define DEF_NUM_PARTS 0 @@ -186,6 +187,7 @@ static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO; static unsigned int scsi_debug_lbpu = DEF_LBPU; static unsigned int scsi_debug_lbpws = DEF_LBPWS; static unsigned int scsi_debug_lbpws10 = DEF_LBPWS10; +static unsigned int scsi_debug_lbprz = DEF_LBPRZ; static unsigned int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT; static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY; static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS; @@ -775,10 +777,10 @@ static int inquiry_evpd_b1(unsigned char *arr) return 0x3c; } -/* Thin provisioning VPD page (SBC-3) */ +/* Logical block provisioning VPD page (SBC-3) */ static int inquiry_evpd_b2(unsigned char *arr) { - memset(arr, 0, 0x8); + memset(arr, 0, 0x4); arr[0] = 0; /* threshold exponent */ if (scsi_debug_lbpu) @@ -790,7 +792,10 @@ static int inquiry_evpd_b2(unsigned char *arr) if (scsi_debug_lbpws10) arr[1] |= 1 << 5; - return 0x8; + if (scsi_debug_lbprz) + arr[1] |= 1 << 2; + + return 0x4; } #define SDEBUG_LONG_INQ_SZ 96 @@ -1071,8 +1076,11 @@ static int resp_readcap16(struct scsi_cmnd * scp, arr[13] = scsi_debug_physblk_exp & 0xf; arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f; - if (scsi_debug_lbp()) + if (scsi_debug_lbp()) { arr[14] |= 0x80; /* LBPME */ + if (scsi_debug_lbprz) + arr[14] |= 0x40; /* LBPRZ */ + } arr[15] = scsi_debug_lowest_aligned & 0xff; @@ -2046,10 +2054,13 @@ static void unmap_region(sector_t lba, unsigned int len) block = lba + alignment; rem = do_div(block, granularity); - if (rem == 0 && lba + granularity <= end && - block < map_size) + if (rem == 0 && lba + granularity <= end && block < map_size) { clear_bit(block, map_storep); - + if (scsi_debug_lbprz) + memset(fake_storep + + block * scsi_debug_sector_size, 0, + scsi_debug_sector_size); + } lba += granularity - rem; } } @@ -2731,6 +2742,7 @@ module_param_named(guard, scsi_debug_guard, int, S_IRUGO); module_param_named(lbpu, scsi_debug_lbpu, int, S_IRUGO); module_param_named(lbpws, scsi_debug_lbpws, int, S_IRUGO); module_param_named(lbpws10, scsi_debug_lbpws10, int, S_IRUGO); +module_param_named(lbprz, scsi_debug_lbprz, int, S_IRUGO); module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO); module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR); module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR); @@ -2772,6 +2784,7 @@ MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)"); MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)"); MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)"); MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)"); +MODULE_PARM_DESC(lbprz, "unmapped blocks return 0 on read (def=1)"); MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)"); MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)"); MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to 255(def))"); diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index fac31730addf..1cf640e575da 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1486,7 +1486,7 @@ void iscsi_post_host_event(uint32_t host_no, struct iscsi_transport *transport, struct iscsi_uevent *ev; int len = NLMSG_SPACE(sizeof(*ev) + data_size); - skb = alloc_skb(len, GFP_KERNEL); + skb = alloc_skb(len, GFP_NOIO); if (!skb) { printk(KERN_ERR "gracefully ignored host event (%d):%d OOM\n", host_no, code); @@ -1504,7 +1504,7 @@ void iscsi_post_host_event(uint32_t host_no, struct iscsi_transport *transport, if (data_size) memcpy((char *)ev + sizeof(*ev), data, data_size); - iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL); + iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_NOIO); } EXPORT_SYMBOL_GPL(iscsi_post_host_event); @@ -1517,7 +1517,7 @@ void iscsi_ping_comp_event(uint32_t host_no, struct iscsi_transport *transport, struct iscsi_uevent *ev; int len = NLMSG_SPACE(sizeof(*ev) + data_size); - skb = alloc_skb(len, GFP_KERNEL); + skb = alloc_skb(len, GFP_NOIO); if (!skb) { printk(KERN_ERR "gracefully ignored ping comp: OOM\n"); return; @@ -1533,7 +1533,7 @@ void iscsi_ping_comp_event(uint32_t host_no, struct iscsi_transport *transport, ev->r.ping_comp.data_size = data_size; memcpy((char *)ev + sizeof(*ev), data, data_size); - iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL); + iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_NOIO); } EXPORT_SYMBOL_GPL(iscsi_ping_comp_event); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 09e3df42a402..5ba5c2a9e8e9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -664,7 +664,7 @@ static void sd_unprep_fn(struct request_queue *q, struct request *rq) } /** - * sd_init_command - build a scsi (read or write) command from + * sd_prep_fn - build a scsi (read or write) command from * information in the request structure. * @SCpnt: pointer to mid-level's per scsi command structure that * contains request and into which the scsi command is written @@ -711,7 +711,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) ret = BLKPREP_KILL; SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt, - "sd_init_command: block=%llu, " + "sd_prep_fn: block=%llu, " "count=%d\n", (unsigned long long)block, this_count)); @@ -1212,9 +1212,14 @@ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) retval = -ENODEV; if (scsi_block_when_processing_errors(sdp)) { + retval = scsi_autopm_get_device(sdp); + if (retval) + goto out; + sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES, sshdr); + scsi_autopm_put_device(sdp); } /* failed to execute TUR, assume media not present */ @@ -2644,8 +2649,8 @@ static void sd_probe_async(void *data, async_cookie_t cookie) * (e.g. /dev/sda). More precisely it is the block device major * and minor number that is chosen here. * - * Assume sd_attach is not re-entrant (for time being) - * Also think about sd_attach() and sd_remove() running coincidentally. + * Assume sd_probe is not re-entrant (for time being) + * Also think about sd_probe() and sd_remove() running coincidentally. **/ static int sd_probe(struct device *dev) { @@ -2660,7 +2665,7 @@ static int sd_probe(struct device *dev) goto out; SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp, - "sd_attach\n")); + "sd_probe\n")); error = -ENOMEM; sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index a15f691f9d34..e41998cb098e 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -1105,6 +1105,12 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) STp->drv_buffer)); } STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0; + if (!STp->drv_buffer && STp->immediate_filemark) { + printk(KERN_WARNING + "%s: non-buffered tape: disabling writing immediate filemarks\n", + name); + STp->immediate_filemark = 0; + } } st_release_request(SRpnt); SRpnt = NULL; @@ -1313,6 +1319,8 @@ static int st_flush(struct file *filp, fl_owner_t id) memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_FILEMARKS; + if (STp->immediate_filemark) + cmd[1] = 1; cmd[4] = 1 + STp->two_fm; SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, @@ -2180,8 +2188,9 @@ static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm, char name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, STp->scsi2_logical); printk(KERN_INFO - "%s: sysv: %d nowait: %d sili: %d\n", name, STm->sysv, STp->immediate, - STp->sili); + "%s: sysv: %d nowait: %d sili: %d nowait_filemark: %d\n", + name, STm->sysv, STp->immediate, STp->sili, + STp->immediate_filemark); printk(KERN_INFO "%s: debugging: %d\n", name, debugging); } @@ -2223,6 +2232,7 @@ static int st_set_options(struct scsi_tape *STp, long options) STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0; STp->immediate = (options & MT_ST_NOWAIT) != 0; + STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0; STm->sysv = (options & MT_ST_SYSV) != 0; STp->sili = (options & MT_ST_SILI) != 0; DEB( debugging = (options & MT_ST_DEBUGGING) != 0; @@ -2254,6 +2264,8 @@ static int st_set_options(struct scsi_tape *STp, long options) STp->scsi2_logical = value; if ((options & MT_ST_NOWAIT) != 0) STp->immediate = value; + if ((options & MT_ST_NOWAIT_EOF) != 0) + STp->immediate_filemark = value; if ((options & MT_ST_SYSV) != 0) STm->sysv = value; if ((options & MT_ST_SILI) != 0) @@ -2713,7 +2725,8 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon cmd[0] = WRITE_FILEMARKS; if (cmd_in == MTWSM) cmd[1] = 2; - if (cmd_in == MTWEOFI) + if (cmd_in == MTWEOFI || + (cmd_in == MTWEOF && STp->immediate_filemark)) cmd[1] |= 1; cmd[2] = (arg >> 16); cmd[3] = (arg >> 8); @@ -4092,6 +4105,7 @@ static int st_probe(struct device *dev) tpnt->scsi2_logical = ST_SCSI2LOGICAL; tpnt->sili = ST_SILI; tpnt->immediate = ST_NOWAIT; + tpnt->immediate_filemark = 0; tpnt->default_drvbuffer = 0xff; /* No forced buffering */ tpnt->partition = 0; tpnt->new_partition = 0; @@ -4477,6 +4491,7 @@ st_options_show(struct device *dev, struct device_attribute *attr, char *buf) options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0; options |= STm->sysv ? MT_ST_SYSV : 0; options |= STp->immediate ? MT_ST_NOWAIT : 0; + options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0; options |= STp->sili ? MT_ST_SILI : 0; l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options); diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index f91a67c6d968..ea35632b986c 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -120,6 +120,7 @@ struct scsi_tape { unsigned char c_algo; /* compression algorithm */ unsigned char pos_unknown; /* after reset position unknown */ unsigned char sili; /* use SILI when reading in variable b mode */ + unsigned char immediate_filemark; /* write filemark immediately */ int tape_type; int long_timeout; /* timeout for commands known to take long time */ diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig new file mode 100644 index 000000000000..8f27f9d6f91d --- /dev/null +++ b/drivers/scsi/ufs/Kconfig @@ -0,0 +1,49 @@ +# +# Kernel configuration file for the UFS Host Controller +# +# This code is based on drivers/scsi/ufs/Kconfig +# Copyright (C) 2011 Samsung Samsung India Software Operations +# +# Santosh Yaraganavi <santosh.sy@samsung.com> +# Vinayak Holikatti <h.vinayak@samsung.com> + +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# NO WARRANTY +# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +# solely responsible for determining the appropriateness of using and +# distributing the Program and assumes all risks associated with its +# exercise of rights under this Agreement, including but not limited to +# the risks and costs of program errors, damage to or loss of data, +# programs or equipment, and unavailability or interruption of operations. + +# DISCLAIMER OF LIABILITY +# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, +# USA. + +config SCSI_UFSHCD + tristate "Universal Flash Storage host controller driver" + depends on PCI && SCSI + ---help--- + This is a generic driver which supports PCIe UFS Host controllers. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile new file mode 100644 index 000000000000..adf7895a6a91 --- /dev/null +++ b/drivers/scsi/ufs/Makefile @@ -0,0 +1,2 @@ +# UFSHCD makefile +obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h new file mode 100644 index 000000000000..b207529f8d54 --- /dev/null +++ b/drivers/scsi/ufs/ufs.h @@ -0,0 +1,207 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufs.h + * Copyright (C) 2011-2012 Samsung India Software Operations + * + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef _UFS_H +#define _UFS_H + +#define MAX_CDB_SIZE 16 + +#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\ + ((byte3 << 24) | (byte2 << 16) |\ + (byte1 << 8) | (byte0)) + +/* + * UFS Protocol Information Unit related definitions + */ + +/* Task management functions */ +enum { + UFS_ABORT_TASK = 0x01, + UFS_ABORT_TASK_SET = 0x02, + UFS_CLEAR_TASK_SET = 0x04, + UFS_LOGICAL_RESET = 0x08, + UFS_QUERY_TASK = 0x80, + UFS_QUERY_TASK_SET = 0x81, +}; + +/* UTP UPIU Transaction Codes Initiator to Target */ +enum { + UPIU_TRANSACTION_NOP_OUT = 0x00, + UPIU_TRANSACTION_COMMAND = 0x01, + UPIU_TRANSACTION_DATA_OUT = 0x02, + UPIU_TRANSACTION_TASK_REQ = 0x04, + UPIU_TRANSACTION_QUERY_REQ = 0x26, +}; + +/* UTP UPIU Transaction Codes Target to Initiator */ +enum { + UPIU_TRANSACTION_NOP_IN = 0x20, + UPIU_TRANSACTION_RESPONSE = 0x21, + UPIU_TRANSACTION_DATA_IN = 0x22, + UPIU_TRANSACTION_TASK_RSP = 0x24, + UPIU_TRANSACTION_READY_XFER = 0x31, + UPIU_TRANSACTION_QUERY_RSP = 0x36, +}; + +/* UPIU Read/Write flags */ +enum { + UPIU_CMD_FLAGS_NONE = 0x00, + UPIU_CMD_FLAGS_WRITE = 0x20, + UPIU_CMD_FLAGS_READ = 0x40, +}; + +/* UPIU Task Attributes */ +enum { + UPIU_TASK_ATTR_SIMPLE = 0x00, + UPIU_TASK_ATTR_ORDERED = 0x01, + UPIU_TASK_ATTR_HEADQ = 0x02, + UPIU_TASK_ATTR_ACA = 0x03, +}; + +/* UTP QUERY Transaction Specific Fields OpCode */ +enum { + UPIU_QUERY_OPCODE_NOP = 0x0, + UPIU_QUERY_OPCODE_READ_DESC = 0x1, + UPIU_QUERY_OPCODE_WRITE_DESC = 0x2, + UPIU_QUERY_OPCODE_READ_ATTR = 0x3, + UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4, + UPIU_QUERY_OPCODE_READ_FLAG = 0x5, + UPIU_QUERY_OPCODE_SET_FLAG = 0x6, + UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7, + UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8, +}; + +/* UTP Transfer Request Command Type (CT) */ +enum { + UPIU_COMMAND_SET_TYPE_SCSI = 0x0, + UPIU_COMMAND_SET_TYPE_UFS = 0x1, + UPIU_COMMAND_SET_TYPE_QUERY = 0x2, +}; + +enum { + MASK_SCSI_STATUS = 0xFF, + MASK_TASK_RESPONSE = 0xFF00, + MASK_RSP_UPIU_RESULT = 0xFFFF, +}; + +/* Task management service response */ +enum { + UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00, + UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04, + UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08, + UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05, + UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09, +}; +/** + * struct utp_upiu_header - UPIU header structure + * @dword_0: UPIU header DW-0 + * @dword_1: UPIU header DW-1 + * @dword_2: UPIU header DW-2 + */ +struct utp_upiu_header { + u32 dword_0; + u32 dword_1; + u32 dword_2; +}; + +/** + * struct utp_upiu_cmd - Command UPIU structure + * @header: UPIU header structure DW-0 to DW-2 + * @data_transfer_len: Data Transfer Length DW-3 + * @cdb: Command Descriptor Block CDB DW-4 to DW-7 + */ +struct utp_upiu_cmd { + struct utp_upiu_header header; + u32 exp_data_transfer_len; + u8 cdb[MAX_CDB_SIZE]; +}; + +/** + * struct utp_upiu_rsp - Response UPIU structure + * @header: UPIU header DW-0 to DW-2 + * @residual_transfer_count: Residual transfer count DW-3 + * @reserved: Reserved double words DW-4 to DW-7 + * @sense_data_len: Sense data length DW-8 U16 + * @sense_data: Sense data field DW-8 to DW-12 + */ +struct utp_upiu_rsp { + struct utp_upiu_header header; + u32 residual_transfer_count; + u32 reserved[4]; + u16 sense_data_len; + u8 sense_data[18]; +}; + +/** + * struct utp_upiu_task_req - Task request UPIU structure + * @header - UPIU header structure DW0 to DW-2 + * @input_param1: Input parameter 1 DW-3 + * @input_param2: Input parameter 2 DW-4 + * @input_param3: Input parameter 3 DW-5 + * @reserved: Reserved double words DW-6 to DW-7 + */ +struct utp_upiu_task_req { + struct utp_upiu_header header; + u32 input_param1; + u32 input_param2; + u32 input_param3; + u32 reserved[2]; +}; + +/** + * struct utp_upiu_task_rsp - Task Management Response UPIU structure + * @header: UPIU header structure DW0-DW-2 + * @output_param1: Ouput parameter 1 DW3 + * @output_param2: Output parameter 2 DW4 + * @reserved: Reserved double words DW-5 to DW-7 + */ +struct utp_upiu_task_rsp { + struct utp_upiu_header header; + u32 output_param1; + u32 output_param2; + u32 reserved[3]; +}; + +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c new file mode 100644 index 000000000000..52b96e8bf92e --- /dev/null +++ b/drivers/scsi/ufs/ufshcd.c @@ -0,0 +1,1978 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshcd.c + * Copyright (C) 2011-2012 Samsung India Software Operations + * + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <linux/bitops.h> + +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_dbg.h> +#include <scsi/scsi_eh.h> + +#include "ufs.h" +#include "ufshci.h" + +#define UFSHCD "ufshcd" +#define UFSHCD_DRIVER_VERSION "0.1" + +enum { + UFSHCD_MAX_CHANNEL = 0, + UFSHCD_MAX_ID = 1, + UFSHCD_MAX_LUNS = 8, + UFSHCD_CMD_PER_LUN = 32, + UFSHCD_CAN_QUEUE = 32, +}; + +/* UFSHCD states */ +enum { + UFSHCD_STATE_OPERATIONAL, + UFSHCD_STATE_RESET, + UFSHCD_STATE_ERROR, +}; + +/* Interrupt configuration options */ +enum { + UFSHCD_INT_DISABLE, + UFSHCD_INT_ENABLE, + UFSHCD_INT_CLEAR, +}; + +/* Interrupt aggregation options */ +enum { + INT_AGGR_RESET, + INT_AGGR_CONFIG, +}; + +/** + * struct uic_command - UIC command structure + * @command: UIC command + * @argument1: UIC command argument 1 + * @argument2: UIC command argument 2 + * @argument3: UIC command argument 3 + * @cmd_active: Indicate if UIC command is outstanding + * @result: UIC command result + */ +struct uic_command { + u32 command; + u32 argument1; + u32 argument2; + u32 argument3; + int cmd_active; + int result; +}; + +/** + * struct ufs_hba - per adapter private structure + * @mmio_base: UFSHCI base register address + * @ucdl_base_addr: UFS Command Descriptor base address + * @utrdl_base_addr: UTP Transfer Request Descriptor base address + * @utmrdl_base_addr: UTP Task Management Descriptor base address + * @ucdl_dma_addr: UFS Command Descriptor DMA address + * @utrdl_dma_addr: UTRDL DMA address + * @utmrdl_dma_addr: UTMRDL DMA address + * @host: Scsi_Host instance of the driver + * @pdev: PCI device handle + * @lrb: local reference block + * @outstanding_tasks: Bits representing outstanding task requests + * @outstanding_reqs: Bits representing outstanding transfer requests + * @capabilities: UFS Controller Capabilities + * @nutrs: Transfer Request Queue depth supported by controller + * @nutmrs: Task Management Queue depth supported by controller + * @active_uic_cmd: handle of active UIC command + * @ufshcd_tm_wait_queue: wait queue for task management + * @tm_condition: condition variable for task management + * @ufshcd_state: UFSHCD states + * @int_enable_mask: Interrupt Mask Bits + * @uic_workq: Work queue for UIC completion handling + * @feh_workq: Work queue for fatal controller error handling + * @errors: HBA errors + */ +struct ufs_hba { + void __iomem *mmio_base; + + /* Virtual memory reference */ + struct utp_transfer_cmd_desc *ucdl_base_addr; + struct utp_transfer_req_desc *utrdl_base_addr; + struct utp_task_req_desc *utmrdl_base_addr; + + /* DMA memory reference */ + dma_addr_t ucdl_dma_addr; + dma_addr_t utrdl_dma_addr; + dma_addr_t utmrdl_dma_addr; + + struct Scsi_Host *host; + struct pci_dev *pdev; + + struct ufshcd_lrb *lrb; + + unsigned long outstanding_tasks; + unsigned long outstanding_reqs; + + u32 capabilities; + int nutrs; + int nutmrs; + u32 ufs_version; + + struct uic_command active_uic_cmd; + wait_queue_head_t ufshcd_tm_wait_queue; + unsigned long tm_condition; + + u32 ufshcd_state; + u32 int_enable_mask; + + /* Work Queues */ + struct work_struct uic_workq; + struct work_struct feh_workq; + + /* HBA Errors */ + u32 errors; +}; + +/** + * struct ufshcd_lrb - local reference block + * @utr_descriptor_ptr: UTRD address of the command + * @ucd_cmd_ptr: UCD address of the command + * @ucd_rsp_ptr: Response UPIU address for this command + * @ucd_prdt_ptr: PRDT address of the command + * @cmd: pointer to SCSI command + * @sense_buffer: pointer to sense buffer address of the SCSI command + * @sense_bufflen: Length of the sense buffer + * @scsi_status: SCSI status of the command + * @command_type: SCSI, UFS, Query. + * @task_tag: Task tag of the command + * @lun: LUN of the command + */ +struct ufshcd_lrb { + struct utp_transfer_req_desc *utr_descriptor_ptr; + struct utp_upiu_cmd *ucd_cmd_ptr; + struct utp_upiu_rsp *ucd_rsp_ptr; + struct ufshcd_sg_entry *ucd_prdt_ptr; + + struct scsi_cmnd *cmd; + u8 *sense_buffer; + unsigned int sense_bufflen; + int scsi_status; + + int command_type; + int task_tag; + unsigned int lun; +}; + +/** + * ufshcd_get_ufs_version - Get the UFS version supported by the HBA + * @hba - Pointer to adapter instance + * + * Returns UFSHCI version supported by the controller + */ +static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba) +{ + return readl(hba->mmio_base + REG_UFS_VERSION); +} + +/** + * ufshcd_is_device_present - Check if any device connected to + * the host controller + * @reg_hcs - host controller status register value + * + * Returns 0 if device present, non-zero if no device detected + */ +static inline int ufshcd_is_device_present(u32 reg_hcs) +{ + return (DEVICE_PRESENT & reg_hcs) ? 0 : -1; +} + +/** + * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status + * @lrb: pointer to local command reference block + * + * This function is used to get the OCS field from UTRD + * Returns the OCS field in the UTRD + */ +static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) +{ + return lrbp->utr_descriptor_ptr->header.dword_2 & MASK_OCS; +} + +/** + * ufshcd_get_tmr_ocs - Get the UTMRD Overall Command Status + * @task_req_descp: pointer to utp_task_req_desc structure + * + * This function is used to get the OCS field from UTMRD + * Returns the OCS field in the UTMRD + */ +static inline int +ufshcd_get_tmr_ocs(struct utp_task_req_desc *task_req_descp) +{ + return task_req_descp->header.dword_2 & MASK_OCS; +} + +/** + * ufshcd_get_tm_free_slot - get a free slot for task management request + * @hba: per adapter instance + * + * Returns maximum number of task management request slots in case of + * task management queue full or returns the free slot number + */ +static inline int ufshcd_get_tm_free_slot(struct ufs_hba *hba) +{ + return find_first_zero_bit(&hba->outstanding_tasks, hba->nutmrs); +} + +/** + * ufshcd_utrl_clear - Clear a bit in UTRLCLR register + * @hba: per adapter instance + * @pos: position of the bit to be cleared + */ +static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) +{ + writel(~(1 << pos), + (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_CLEAR)); +} + +/** + * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY + * @reg: Register value of host controller status + * + * Returns integer, 0 on Success and positive value if failed + */ +static inline int ufshcd_get_lists_status(u32 reg) +{ + /* + * The mask 0xFF is for the following HCS register bits + * Bit Description + * 0 Device Present + * 1 UTRLRDY + * 2 UTMRLRDY + * 3 UCRDY + * 4 HEI + * 5 DEI + * 6-7 reserved + */ + return (((reg) & (0xFF)) >> 1) ^ (0x07); +} + +/** + * ufshcd_get_uic_cmd_result - Get the UIC command result + * @hba: Pointer to adapter instance + * + * This function gets the result of UIC command completion + * Returns 0 on success, non zero value on error + */ +static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba) +{ + return readl(hba->mmio_base + REG_UIC_COMMAND_ARG_2) & + MASK_UIC_COMMAND_RESULT; +} + +/** + * ufshcd_free_hba_memory - Free allocated memory for LRB, request + * and task lists + * @hba: Pointer to adapter instance + */ +static inline void ufshcd_free_hba_memory(struct ufs_hba *hba) +{ + size_t utmrdl_size, utrdl_size, ucdl_size; + + kfree(hba->lrb); + + if (hba->utmrdl_base_addr) { + utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; + dma_free_coherent(&hba->pdev->dev, utmrdl_size, + hba->utmrdl_base_addr, hba->utmrdl_dma_addr); + } + + if (hba->utrdl_base_addr) { + utrdl_size = + (sizeof(struct utp_transfer_req_desc) * hba->nutrs); + dma_free_coherent(&hba->pdev->dev, utrdl_size, + hba->utrdl_base_addr, hba->utrdl_dma_addr); + } + + if (hba->ucdl_base_addr) { + ucdl_size = + (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); + dma_free_coherent(&hba->pdev->dev, ucdl_size, + hba->ucdl_base_addr, hba->ucdl_dma_addr); + } +} + +/** + * ufshcd_is_valid_req_rsp - checks if controller TR response is valid + * @ucd_rsp_ptr: pointer to response UPIU + * + * This function checks the response UPIU for valid transaction type in + * response field + * Returns 0 on success, non-zero on failure + */ +static inline int +ufshcd_is_valid_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return ((be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24) == + UPIU_TRANSACTION_RESPONSE) ? 0 : DID_ERROR << 16; +} + +/** + * ufshcd_get_rsp_upiu_result - Get the result from response UPIU + * @ucd_rsp_ptr: pointer to response UPIU + * + * This function gets the response status and scsi_status from response UPIU + * Returns the response result code. + */ +static inline int +ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT; +} + +/** + * ufshcd_config_int_aggr - Configure interrupt aggregation values. + * Currently there is no use case where we want to configure + * interrupt aggregation dynamically. So to configure interrupt + * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and + * INT_AGGR_TIMEOUT_VALUE are used. + * @hba: per adapter instance + * @option: Interrupt aggregation option + */ +static inline void +ufshcd_config_int_aggr(struct ufs_hba *hba, int option) +{ + switch (option) { + case INT_AGGR_RESET: + writel((INT_AGGR_ENABLE | + INT_AGGR_COUNTER_AND_TIMER_RESET), + (hba->mmio_base + + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL)); + break; + case INT_AGGR_CONFIG: + writel((INT_AGGR_ENABLE | + INT_AGGR_PARAM_WRITE | + INT_AGGR_COUNTER_THRESHOLD_VALUE | + INT_AGGR_TIMEOUT_VALUE), + (hba->mmio_base + + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL)); + break; + } +} + +/** + * ufshcd_enable_run_stop_reg - Enable run-stop registers, + * When run-stop registers are set to 1, it indicates the + * host controller that it can process the requests + * @hba: per adapter instance + */ +static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) +{ + writel(UTP_TASK_REQ_LIST_RUN_STOP_BIT, + (hba->mmio_base + + REG_UTP_TASK_REQ_LIST_RUN_STOP)); + writel(UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, + (hba->mmio_base + + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP)); +} + +/** + * ufshcd_hba_stop - Send controller to reset state + * @hba: per adapter instance + */ +static inline void ufshcd_hba_stop(struct ufs_hba *hba) +{ + writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE)); +} + +/** + * ufshcd_hba_start - Start controller initialization sequence + * @hba: per adapter instance + */ +static inline void ufshcd_hba_start(struct ufs_hba *hba) +{ + writel(CONTROLLER_ENABLE , (hba->mmio_base + REG_CONTROLLER_ENABLE)); +} + +/** + * ufshcd_is_hba_active - Get controller state + * @hba: per adapter instance + * + * Returns zero if controller is active, 1 otherwise + */ +static inline int ufshcd_is_hba_active(struct ufs_hba *hba) +{ + return (readl(hba->mmio_base + REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1; +} + +/** + * ufshcd_send_command - Send SCSI or device management commands + * @hba: per adapter instance + * @task_tag: Task tag of the command + */ +static inline +void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag) +{ + __set_bit(task_tag, &hba->outstanding_reqs); + writel((1 << task_tag), + (hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL)); +} + +/** + * ufshcd_copy_sense_data - Copy sense data in case of check condition + * @lrb - pointer to local reference block + */ +static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp) +{ + int len; + if (lrbp->sense_buffer) { + len = be16_to_cpu(lrbp->ucd_rsp_ptr->sense_data_len); + memcpy(lrbp->sense_buffer, + lrbp->ucd_rsp_ptr->sense_data, + min_t(int, len, SCSI_SENSE_BUFFERSIZE)); + } +} + +/** + * ufshcd_hba_capabilities - Read controller capabilities + * @hba: per adapter instance + */ +static inline void ufshcd_hba_capabilities(struct ufs_hba *hba) +{ + hba->capabilities = + readl(hba->mmio_base + REG_CONTROLLER_CAPABILITIES); + + /* nutrs and nutmrs are 0 based values */ + hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1; + hba->nutmrs = + ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1; +} + +/** + * ufshcd_send_uic_command - Send UIC commands to unipro layers + * @hba: per adapter instance + * @uic_command: UIC command + */ +static inline void +ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd) +{ + /* Write Args */ + writel(uic_cmnd->argument1, + (hba->mmio_base + REG_UIC_COMMAND_ARG_1)); + writel(uic_cmnd->argument2, + (hba->mmio_base + REG_UIC_COMMAND_ARG_2)); + writel(uic_cmnd->argument3, + (hba->mmio_base + REG_UIC_COMMAND_ARG_3)); + + /* Write UIC Cmd */ + writel((uic_cmnd->command & COMMAND_OPCODE_MASK), + (hba->mmio_base + REG_UIC_COMMAND)); +} + +/** + * ufshcd_map_sg - Map scatter-gather list to prdt + * @lrbp - pointer to local reference block + * + * Returns 0 in case of success, non-zero value in case of failure + */ +static int ufshcd_map_sg(struct ufshcd_lrb *lrbp) +{ + struct ufshcd_sg_entry *prd_table; + struct scatterlist *sg; + struct scsi_cmnd *cmd; + int sg_segments; + int i; + + cmd = lrbp->cmd; + sg_segments = scsi_dma_map(cmd); + if (sg_segments < 0) + return sg_segments; + + if (sg_segments) { + lrbp->utr_descriptor_ptr->prd_table_length = + cpu_to_le16((u16) (sg_segments)); + + prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr; + + scsi_for_each_sg(cmd, sg, sg_segments, i) { + prd_table[i].size = + cpu_to_le32(((u32) sg_dma_len(sg))-1); + prd_table[i].base_addr = + cpu_to_le32(lower_32_bits(sg->dma_address)); + prd_table[i].upper_addr = + cpu_to_le32(upper_32_bits(sg->dma_address)); + } + } else { + lrbp->utr_descriptor_ptr->prd_table_length = 0; + } + + return 0; +} + +/** + * ufshcd_int_config - enable/disable interrupts + * @hba: per adapter instance + * @option: interrupt option + */ +static void ufshcd_int_config(struct ufs_hba *hba, u32 option) +{ + switch (option) { + case UFSHCD_INT_ENABLE: + writel(hba->int_enable_mask, + (hba->mmio_base + REG_INTERRUPT_ENABLE)); + break; + case UFSHCD_INT_DISABLE: + if (hba->ufs_version == UFSHCI_VERSION_10) + writel(INTERRUPT_DISABLE_MASK_10, + (hba->mmio_base + REG_INTERRUPT_ENABLE)); + else + writel(INTERRUPT_DISABLE_MASK_11, + (hba->mmio_base + REG_INTERRUPT_ENABLE)); + break; + } +} + +/** + * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU) + * @lrb - pointer to local reference block + */ +static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp) +{ + struct utp_transfer_req_desc *req_desc; + struct utp_upiu_cmd *ucd_cmd_ptr; + u32 data_direction; + u32 upiu_flags; + + ucd_cmd_ptr = lrbp->ucd_cmd_ptr; + req_desc = lrbp->utr_descriptor_ptr; + + switch (lrbp->command_type) { + case UTP_CMD_TYPE_SCSI: + if (lrbp->cmd->sc_data_direction == DMA_FROM_DEVICE) { + data_direction = UTP_DEVICE_TO_HOST; + upiu_flags = UPIU_CMD_FLAGS_READ; + } else if (lrbp->cmd->sc_data_direction == DMA_TO_DEVICE) { + data_direction = UTP_HOST_TO_DEVICE; + upiu_flags = UPIU_CMD_FLAGS_WRITE; + } else { + data_direction = UTP_NO_DATA_TRANSFER; + upiu_flags = UPIU_CMD_FLAGS_NONE; + } + + /* Transfer request descriptor header fields */ + req_desc->header.dword_0 = + cpu_to_le32(data_direction | UTP_SCSI_COMMAND); + + /* + * assigning invalid value for command status. Controller + * updates OCS on command completion, with the command + * status + */ + req_desc->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + + /* command descriptor fields */ + ucd_cmd_ptr->header.dword_0 = + cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND, + upiu_flags, + lrbp->lun, + lrbp->task_tag)); + ucd_cmd_ptr->header.dword_1 = + cpu_to_be32( + UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI, + 0, + 0, + 0)); + + /* Total EHS length and Data segment length will be zero */ + ucd_cmd_ptr->header.dword_2 = 0; + + ucd_cmd_ptr->exp_data_transfer_len = + cpu_to_be32(lrbp->cmd->transfersize); + + memcpy(ucd_cmd_ptr->cdb, + lrbp->cmd->cmnd, + (min_t(unsigned short, + lrbp->cmd->cmd_len, + MAX_CDB_SIZE))); + break; + case UTP_CMD_TYPE_DEV_MANAGE: + /* For query function implementation */ + break; + case UTP_CMD_TYPE_UFS: + /* For UFS native command implementation */ + break; + } /* end of switch */ +} + +/** + * ufshcd_queuecommand - main entry point for SCSI requests + * @cmd: command from SCSI Midlayer + * @done: call back function + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) +{ + struct ufshcd_lrb *lrbp; + struct ufs_hba *hba; + unsigned long flags; + int tag; + int err = 0; + + hba = shost_priv(host); + + tag = cmd->request->tag; + + if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) { + err = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + + lrbp = &hba->lrb[tag]; + + lrbp->cmd = cmd; + lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE; + lrbp->sense_buffer = cmd->sense_buffer; + lrbp->task_tag = tag; + lrbp->lun = cmd->device->lun; + + lrbp->command_type = UTP_CMD_TYPE_SCSI; + + /* form UPIU before issuing the command */ + ufshcd_compose_upiu(lrbp); + err = ufshcd_map_sg(lrbp); + if (err) + goto out; + + /* issue command to the controller */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_send_command(hba, tag); + spin_unlock_irqrestore(hba->host->host_lock, flags); +out: + return err; +} + +/** + * ufshcd_memory_alloc - allocate memory for host memory space data structures + * @hba: per adapter instance + * + * 1. Allocate DMA memory for Command Descriptor array + * Each command descriptor consist of Command UPIU, Response UPIU and PRDT + * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL). + * 3. Allocate DMA memory for UTP Task Management Request Descriptor List + * (UTMRDL) + * 4. Allocate memory for local reference block(lrb). + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_memory_alloc(struct ufs_hba *hba) +{ + size_t utmrdl_size, utrdl_size, ucdl_size; + + /* Allocate memory for UTP command descriptors */ + ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); + hba->ucdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + ucdl_size, + &hba->ucdl_dma_addr, + GFP_KERNEL); + + /* + * UFSHCI requires UTP command descriptor to be 128 byte aligned. + * make sure hba->ucdl_dma_addr is aligned to PAGE_SIZE + * if hba->ucdl_dma_addr is aligned to PAGE_SIZE, then it will + * be aligned to 128 bytes as well + */ + if (!hba->ucdl_base_addr || + WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(&hba->pdev->dev, + "Command Descriptor Memory allocation failed\n"); + goto out; + } + + /* + * Allocate memory for UTP Transfer descriptors + * UFSHCI requires 1024 byte alignment of UTRD + */ + utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs); + hba->utrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + utrdl_size, + &hba->utrdl_dma_addr, + GFP_KERNEL); + if (!hba->utrdl_base_addr || + WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(&hba->pdev->dev, + "Transfer Descriptor Memory allocation failed\n"); + goto out; + } + + /* + * Allocate memory for UTP Task Management descriptors + * UFSHCI requires 1024 byte alignment of UTMRD + */ + utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; + hba->utmrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + utmrdl_size, + &hba->utmrdl_dma_addr, + GFP_KERNEL); + if (!hba->utmrdl_base_addr || + WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(&hba->pdev->dev, + "Task Management Descriptor Memory allocation failed\n"); + goto out; + } + + /* Allocate memory for local reference block */ + hba->lrb = kcalloc(hba->nutrs, sizeof(struct ufshcd_lrb), GFP_KERNEL); + if (!hba->lrb) { + dev_err(&hba->pdev->dev, "LRB Memory allocation failed\n"); + goto out; + } + return 0; +out: + ufshcd_free_hba_memory(hba); + return -ENOMEM; +} + +/** + * ufshcd_host_memory_configure - configure local reference block with + * memory offsets + * @hba: per adapter instance + * + * Configure Host memory space + * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA + * address. + * 2. Update each UTRD with Response UPIU offset, Response UPIU length + * and PRDT offset. + * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT + * into local reference block. + */ +static void ufshcd_host_memory_configure(struct ufs_hba *hba) +{ + struct utp_transfer_cmd_desc *cmd_descp; + struct utp_transfer_req_desc *utrdlp; + dma_addr_t cmd_desc_dma_addr; + dma_addr_t cmd_desc_element_addr; + u16 response_offset; + u16 prdt_offset; + int cmd_desc_size; + int i; + + utrdlp = hba->utrdl_base_addr; + cmd_descp = hba->ucdl_base_addr; + + response_offset = + offsetof(struct utp_transfer_cmd_desc, response_upiu); + prdt_offset = + offsetof(struct utp_transfer_cmd_desc, prd_table); + + cmd_desc_size = sizeof(struct utp_transfer_cmd_desc); + cmd_desc_dma_addr = hba->ucdl_dma_addr; + + for (i = 0; i < hba->nutrs; i++) { + /* Configure UTRD with command descriptor base address */ + cmd_desc_element_addr = + (cmd_desc_dma_addr + (cmd_desc_size * i)); + utrdlp[i].command_desc_base_addr_lo = + cpu_to_le32(lower_32_bits(cmd_desc_element_addr)); + utrdlp[i].command_desc_base_addr_hi = + cpu_to_le32(upper_32_bits(cmd_desc_element_addr)); + + /* Response upiu and prdt offset should be in double words */ + utrdlp[i].response_upiu_offset = + cpu_to_le16((response_offset >> 2)); + utrdlp[i].prd_table_offset = + cpu_to_le16((prdt_offset >> 2)); + utrdlp[i].response_upiu_length = + cpu_to_le16(ALIGNED_UPIU_SIZE); + + hba->lrb[i].utr_descriptor_ptr = (utrdlp + i); + hba->lrb[i].ucd_cmd_ptr = + (struct utp_upiu_cmd *)(cmd_descp + i); + hba->lrb[i].ucd_rsp_ptr = + (struct utp_upiu_rsp *)cmd_descp[i].response_upiu; + hba->lrb[i].ucd_prdt_ptr = + (struct ufshcd_sg_entry *)cmd_descp[i].prd_table; + } +} + +/** + * ufshcd_dme_link_startup - Notify Unipro to perform link startup + * @hba: per adapter instance + * + * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer, + * in order to initialize the Unipro link startup procedure. + * Once the Unipro links are up, the device connected to the controller + * is detected. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dme_link_startup(struct ufs_hba *hba) +{ + struct uic_command *uic_cmd; + unsigned long flags; + + /* check if controller is ready to accept UIC commands */ + if (((readl(hba->mmio_base + REG_CONTROLLER_STATUS)) & + UIC_COMMAND_READY) == 0x0) { + dev_err(&hba->pdev->dev, + "Controller not ready" + " to accept UIC commands\n"); + return -EIO; + } + + spin_lock_irqsave(hba->host->host_lock, flags); + + /* form UIC command */ + uic_cmd = &hba->active_uic_cmd; + uic_cmd->command = UIC_CMD_DME_LINK_STARTUP; + uic_cmd->argument1 = 0; + uic_cmd->argument2 = 0; + uic_cmd->argument3 = 0; + + /* enable UIC related interrupts */ + hba->int_enable_mask |= UIC_COMMAND_COMPL; + ufshcd_int_config(hba, UFSHCD_INT_ENABLE); + + /* sending UIC commands to controller */ + ufshcd_send_uic_command(hba, uic_cmd); + spin_unlock_irqrestore(hba->host->host_lock, flags); + return 0; +} + +/** + * ufshcd_make_hba_operational - Make UFS controller operational + * @hba: per adapter instance + * + * To bring UFS host controller to operational state, + * 1. Check if device is present + * 2. Configure run-stop-registers + * 3. Enable required interrupts + * 4. Configure interrupt aggregation + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_make_hba_operational(struct ufs_hba *hba) +{ + int err = 0; + u32 reg; + + /* check if device present */ + reg = readl((hba->mmio_base + REG_CONTROLLER_STATUS)); + if (ufshcd_is_device_present(reg)) { + dev_err(&hba->pdev->dev, "cc: Device not present\n"); + err = -ENXIO; + goto out; + } + + /* + * UCRDY, UTMRLDY and UTRLRDY bits must be 1 + * DEI, HEI bits must be 0 + */ + if (!(ufshcd_get_lists_status(reg))) { + ufshcd_enable_run_stop_reg(hba); + } else { + dev_err(&hba->pdev->dev, + "Host controller not ready to process requests"); + err = -EIO; + goto out; + } + + /* Enable required interrupts */ + hba->int_enable_mask |= (UTP_TRANSFER_REQ_COMPL | + UIC_ERROR | + UTP_TASK_REQ_COMPL | + DEVICE_FATAL_ERROR | + CONTROLLER_FATAL_ERROR | + SYSTEM_BUS_FATAL_ERROR); + ufshcd_int_config(hba, UFSHCD_INT_ENABLE); + + /* Configure interrupt aggregation */ + ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG); + + if (hba->ufshcd_state == UFSHCD_STATE_RESET) + scsi_unblock_requests(hba->host); + + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + scsi_scan_host(hba->host); +out: + return err; +} + +/** + * ufshcd_hba_enable - initialize the controller + * @hba: per adapter instance + * + * The controller resets itself and controller firmware initialization + * sequence kicks off. When controller is ready it will set + * the Host Controller Enable bit to 1. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_hba_enable(struct ufs_hba *hba) +{ + int retry; + + /* + * msleep of 1 and 5 used in this function might result in msleep(20), + * but it was necessary to send the UFS FPGA to reset mode during + * development and testing of this driver. msleep can be changed to + * mdelay and retry count can be reduced based on the controller. + */ + if (!ufshcd_is_hba_active(hba)) { + + /* change controller state to "reset state" */ + ufshcd_hba_stop(hba); + + /* + * This delay is based on the testing done with UFS host + * controller FPGA. The delay can be changed based on the + * host controller used. + */ + msleep(5); + } + + /* start controller initialization sequence */ + ufshcd_hba_start(hba); + + /* + * To initialize a UFS host controller HCE bit must be set to 1. + * During initialization the HCE bit value changes from 1->0->1. + * When the host controller completes initialization sequence + * it sets the value of HCE bit to 1. The same HCE bit is read back + * to check if the controller has completed initialization sequence. + * So without this delay the value HCE = 1, set in the previous + * instruction might be read back. + * This delay can be changed based on the controller. + */ + msleep(1); + + /* wait for the host controller to complete initialization */ + retry = 10; + while (ufshcd_is_hba_active(hba)) { + if (retry) { + retry--; + } else { + dev_err(&hba->pdev->dev, + "Controller enable failed\n"); + return -EIO; + } + msleep(5); + } + return 0; +} + +/** + * ufshcd_initialize_hba - start the initialization process + * @hba: per adapter instance + * + * 1. Enable the controller via ufshcd_hba_enable. + * 2. Program the Transfer Request List Address with the starting address of + * UTRDL. + * 3. Program the Task Management Request List Address with starting address + * of UTMRDL. + * + * Returns 0 on success, non-zero value on failure. + */ +static int ufshcd_initialize_hba(struct ufs_hba *hba) +{ + if (ufshcd_hba_enable(hba)) + return -EIO; + + /* Configure UTRL and UTMRL base address registers */ + writel(hba->utrdl_dma_addr, + (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L)); + writel(lower_32_bits(hba->utrdl_dma_addr), + (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_H)); + writel(hba->utmrdl_dma_addr, + (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_L)); + writel(upper_32_bits(hba->utmrdl_dma_addr), + (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_H)); + + /* Initialize unipro link startup procedure */ + return ufshcd_dme_link_startup(hba); +} + +/** + * ufshcd_do_reset - reset the host controller + * @hba: per adapter instance + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_do_reset(struct ufs_hba *hba) +{ + struct ufshcd_lrb *lrbp; + unsigned long flags; + int tag; + + /* block commands from midlayer */ + scsi_block_requests(hba->host); + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->ufshcd_state = UFSHCD_STATE_RESET; + + /* send controller to reset state */ + ufshcd_hba_stop(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* abort outstanding commands */ + for (tag = 0; tag < hba->nutrs; tag++) { + if (test_bit(tag, &hba->outstanding_reqs)) { + lrbp = &hba->lrb[tag]; + scsi_dma_unmap(lrbp->cmd); + lrbp->cmd->result = DID_RESET << 16; + lrbp->cmd->scsi_done(lrbp->cmd); + lrbp->cmd = NULL; + } + } + + /* clear outstanding request/task bit maps */ + hba->outstanding_reqs = 0; + hba->outstanding_tasks = 0; + + /* start the initialization process */ + if (ufshcd_initialize_hba(hba)) { + dev_err(&hba->pdev->dev, + "Reset: Controller initialization failed\n"); + return FAILED; + } + return SUCCESS; +} + +/** + * ufshcd_slave_alloc - handle initial SCSI device configurations + * @sdev: pointer to SCSI device + * + * Returns success + */ +static int ufshcd_slave_alloc(struct scsi_device *sdev) +{ + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + sdev->tagged_supported = 1; + + /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */ + sdev->use_10_for_ms = 1; + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); + + /* + * Inform SCSI Midlayer that the LUN queue depth is same as the + * controller queue depth. If a LUN queue depth is less than the + * controller queue depth and if the LUN reports + * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted + * with scsi_adjust_queue_depth. + */ + scsi_activate_tcq(sdev, hba->nutrs); + return 0; +} + +/** + * ufshcd_slave_destroy - remove SCSI device configurations + * @sdev: pointer to SCSI device + */ +static void ufshcd_slave_destroy(struct scsi_device *sdev) +{ + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + scsi_deactivate_tcq(sdev, hba->nutrs); +} + +/** + * ufshcd_task_req_compl - handle task management request completion + * @hba: per adapter instance + * @index: index of the completed request + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index) +{ + struct utp_task_req_desc *task_req_descp; + struct utp_upiu_task_rsp *task_rsp_upiup; + unsigned long flags; + int ocs_value; + int task_result; + + spin_lock_irqsave(hba->host->host_lock, flags); + + /* Clear completed tasks from outstanding_tasks */ + __clear_bit(index, &hba->outstanding_tasks); + + task_req_descp = hba->utmrdl_base_addr; + ocs_value = ufshcd_get_tmr_ocs(&task_req_descp[index]); + + if (ocs_value == OCS_SUCCESS) { + task_rsp_upiup = (struct utp_upiu_task_rsp *) + task_req_descp[index].task_rsp_upiu; + task_result = be32_to_cpu(task_rsp_upiup->header.dword_1); + task_result = ((task_result & MASK_TASK_RESPONSE) >> 8); + + if (task_result != UPIU_TASK_MANAGEMENT_FUNC_COMPL || + task_result != UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) + task_result = FAILED; + } else { + task_result = FAILED; + dev_err(&hba->pdev->dev, + "trc: Invalid ocs = %x\n", ocs_value); + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + return task_result; +} + +/** + * ufshcd_adjust_lun_qdepth - Update LUN queue depth if device responds with + * SAM_STAT_TASK_SET_FULL SCSI command status. + * @cmd: pointer to SCSI command + */ +static void ufshcd_adjust_lun_qdepth(struct scsi_cmnd *cmd) +{ + struct ufs_hba *hba; + int i; + int lun_qdepth = 0; + + hba = shost_priv(cmd->device->host); + + /* + * LUN queue depth can be obtained by counting outstanding commands + * on the LUN. + */ + for (i = 0; i < hba->nutrs; i++) { + if (test_bit(i, &hba->outstanding_reqs)) { + + /* + * Check if the outstanding command belongs + * to the LUN which reported SAM_STAT_TASK_SET_FULL. + */ + if (cmd->device->lun == hba->lrb[i].lun) + lun_qdepth++; + } + } + + /* + * LUN queue depth will be total outstanding commands, except the + * command for which the LUN reported SAM_STAT_TASK_SET_FULL. + */ + scsi_adjust_queue_depth(cmd->device, MSG_SIMPLE_TAG, lun_qdepth - 1); +} + +/** + * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status + * @lrb: pointer to local reference block of completed command + * @scsi_status: SCSI command status + * + * Returns value base on SCSI command status + */ +static inline int +ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status) +{ + int result = 0; + + switch (scsi_status) { + case SAM_STAT_GOOD: + result |= DID_OK << 16 | + COMMAND_COMPLETE << 8 | + SAM_STAT_GOOD; + break; + case SAM_STAT_CHECK_CONDITION: + result |= DID_OK << 16 | + COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + ufshcd_copy_sense_data(lrbp); + break; + case SAM_STAT_BUSY: + result |= SAM_STAT_BUSY; + break; + case SAM_STAT_TASK_SET_FULL: + + /* + * If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue + * depth needs to be adjusted to the exact number of + * outstanding commands the LUN can handle at any given time. + */ + ufshcd_adjust_lun_qdepth(lrbp->cmd); + result |= SAM_STAT_TASK_SET_FULL; + break; + case SAM_STAT_TASK_ABORTED: + result |= SAM_STAT_TASK_ABORTED; + break; + default: + result |= DID_ERROR << 16; + break; + } /* end of switch */ + + return result; +} + +/** + * ufshcd_transfer_rsp_status - Get overall status of the response + * @hba: per adapter instance + * @lrb: pointer to local reference block of completed command + * + * Returns result of the command to notify SCSI midlayer + */ +static inline int +ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + int result = 0; + int scsi_status; + int ocs; + + /* overall command status of utrd */ + ocs = ufshcd_get_tr_ocs(lrbp); + + switch (ocs) { + case OCS_SUCCESS: + + /* check if the returned transfer response is valid */ + result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr); + if (result) { + dev_err(&hba->pdev->dev, + "Invalid response = %x\n", result); + break; + } + + /* + * get the response UPIU result to extract + * the SCSI command status + */ + result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr); + + /* + * get the result based on SCSI status response + * to notify the SCSI midlayer of the command status + */ + scsi_status = result & MASK_SCSI_STATUS; + result = ufshcd_scsi_cmd_status(lrbp, scsi_status); + break; + case OCS_ABORTED: + result |= DID_ABORT << 16; + break; + case OCS_INVALID_CMD_TABLE_ATTR: + case OCS_INVALID_PRDT_ATTR: + case OCS_MISMATCH_DATA_BUF_SIZE: + case OCS_MISMATCH_RESP_UPIU_SIZE: + case OCS_PEER_COMM_FAILURE: + case OCS_FATAL_ERROR: + default: + result |= DID_ERROR << 16; + dev_err(&hba->pdev->dev, + "OCS error from controller = %x\n", ocs); + break; + } /* end of switch */ + + return result; +} + +/** + * ufshcd_transfer_req_compl - handle SCSI and query command completion + * @hba: per adapter instance + */ +static void ufshcd_transfer_req_compl(struct ufs_hba *hba) +{ + struct ufshcd_lrb *lrb; + unsigned long completed_reqs; + u32 tr_doorbell; + int result; + int index; + + lrb = hba->lrb; + tr_doorbell = + readl(hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL); + completed_reqs = tr_doorbell ^ hba->outstanding_reqs; + + for (index = 0; index < hba->nutrs; index++) { + if (test_bit(index, &completed_reqs)) { + + result = ufshcd_transfer_rsp_status(hba, &lrb[index]); + + if (lrb[index].cmd) { + scsi_dma_unmap(lrb[index].cmd); + lrb[index].cmd->result = result; + lrb[index].cmd->scsi_done(lrb[index].cmd); + + /* Mark completed command as NULL in LRB */ + lrb[index].cmd = NULL; + } + } /* end of if */ + } /* end of for */ + + /* clear corresponding bits of completed commands */ + hba->outstanding_reqs ^= completed_reqs; + + /* Reset interrupt aggregation counters */ + ufshcd_config_int_aggr(hba, INT_AGGR_RESET); +} + +/** + * ufshcd_uic_cc_handler - handle UIC command completion + * @work: pointer to a work queue structure + * + * Returns 0 on success, non-zero value on failure + */ +static void ufshcd_uic_cc_handler (struct work_struct *work) +{ + struct ufs_hba *hba; + + hba = container_of(work, struct ufs_hba, uic_workq); + + if ((hba->active_uic_cmd.command == UIC_CMD_DME_LINK_STARTUP) && + !(ufshcd_get_uic_cmd_result(hba))) { + + if (ufshcd_make_hba_operational(hba)) + dev_err(&hba->pdev->dev, + "cc: hba not operational state\n"); + return; + } +} + +/** + * ufshcd_fatal_err_handler - handle fatal errors + * @hba: per adapter instance + */ +static void ufshcd_fatal_err_handler(struct work_struct *work) +{ + struct ufs_hba *hba; + hba = container_of(work, struct ufs_hba, feh_workq); + + /* check if reset is already in progress */ + if (hba->ufshcd_state != UFSHCD_STATE_RESET) + ufshcd_do_reset(hba); +} + +/** + * ufshcd_err_handler - Check for fatal errors + * @work: pointer to a work queue structure + */ +static void ufshcd_err_handler(struct ufs_hba *hba) +{ + u32 reg; + + if (hba->errors & INT_FATAL_ERRORS) + goto fatal_eh; + + if (hba->errors & UIC_ERROR) { + + reg = readl(hba->mmio_base + + REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER); + if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT) + goto fatal_eh; + } + return; +fatal_eh: + hba->ufshcd_state = UFSHCD_STATE_ERROR; + schedule_work(&hba->feh_workq); +} + +/** + * ufshcd_tmc_handler - handle task management function completion + * @hba: per adapter instance + */ +static void ufshcd_tmc_handler(struct ufs_hba *hba) +{ + u32 tm_doorbell; + + tm_doorbell = readl(hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL); + hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks; + wake_up_interruptible(&hba->ufshcd_tm_wait_queue); +} + +/** + * ufshcd_sl_intr - Interrupt service routine + * @hba: per adapter instance + * @intr_status: contains interrupts generated by the controller + */ +static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) +{ + hba->errors = UFSHCD_ERROR_MASK & intr_status; + if (hba->errors) + ufshcd_err_handler(hba); + + if (intr_status & UIC_COMMAND_COMPL) + schedule_work(&hba->uic_workq); + + if (intr_status & UTP_TASK_REQ_COMPL) + ufshcd_tmc_handler(hba); + + if (intr_status & UTP_TRANSFER_REQ_COMPL) + ufshcd_transfer_req_compl(hba); +} + +/** + * ufshcd_intr - Main interrupt service routine + * @irq: irq number + * @__hba: pointer to adapter instance + * + * Returns IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_intr(int irq, void *__hba) +{ + u32 intr_status; + irqreturn_t retval = IRQ_NONE; + struct ufs_hba *hba = __hba; + + spin_lock(hba->host->host_lock); + intr_status = readl(hba->mmio_base + REG_INTERRUPT_STATUS); + + if (intr_status) { + ufshcd_sl_intr(hba, intr_status); + + /* If UFSHCI 1.0 then clear interrupt status register */ + if (hba->ufs_version == UFSHCI_VERSION_10) + writel(intr_status, + (hba->mmio_base + REG_INTERRUPT_STATUS)); + retval = IRQ_HANDLED; + } + spin_unlock(hba->host->host_lock); + return retval; +} + +/** + * ufshcd_issue_tm_cmd - issues task management commands to controller + * @hba: per adapter instance + * @lrbp: pointer to local reference block + * + * Returns SUCCESS/FAILED + */ +static int +ufshcd_issue_tm_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, + u8 tm_function) +{ + struct utp_task_req_desc *task_req_descp; + struct utp_upiu_task_req *task_req_upiup; + struct Scsi_Host *host; + unsigned long flags; + int free_slot = 0; + int err; + + host = hba->host; + + spin_lock_irqsave(host->host_lock, flags); + + /* If task management queue is full */ + free_slot = ufshcd_get_tm_free_slot(hba); + if (free_slot >= hba->nutmrs) { + spin_unlock_irqrestore(host->host_lock, flags); + dev_err(&hba->pdev->dev, "Task management queue full\n"); + err = FAILED; + goto out; + } + + task_req_descp = hba->utmrdl_base_addr; + task_req_descp += free_slot; + + /* Configure task request descriptor */ + task_req_descp->header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD); + task_req_descp->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + + /* Configure task request UPIU */ + task_req_upiup = + (struct utp_upiu_task_req *) task_req_descp->task_req_upiu; + task_req_upiup->header.dword_0 = + cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0, + lrbp->lun, lrbp->task_tag)); + task_req_upiup->header.dword_1 = + cpu_to_be32(UPIU_HEADER_DWORD(0, tm_function, 0, 0)); + + task_req_upiup->input_param1 = lrbp->lun; + task_req_upiup->input_param1 = + cpu_to_be32(task_req_upiup->input_param1); + task_req_upiup->input_param2 = lrbp->task_tag; + task_req_upiup->input_param2 = + cpu_to_be32(task_req_upiup->input_param2); + + /* send command to the controller */ + __set_bit(free_slot, &hba->outstanding_tasks); + writel((1 << free_slot), + (hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL)); + + spin_unlock_irqrestore(host->host_lock, flags); + + /* wait until the task management command is completed */ + err = + wait_event_interruptible_timeout(hba->ufshcd_tm_wait_queue, + (test_bit(free_slot, + &hba->tm_condition) != 0), + 60 * HZ); + if (!err) { + dev_err(&hba->pdev->dev, + "Task management command timed-out\n"); + err = FAILED; + goto out; + } + clear_bit(free_slot, &hba->tm_condition); + return ufshcd_task_req_compl(hba, free_slot); +out: + return err; +} + +/** + * ufshcd_device_reset - reset device and abort all the pending commands + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_device_reset(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + unsigned int tag; + u32 pos; + int err; + + host = cmd->device->host; + hba = shost_priv(host); + tag = cmd->request->tag; + + err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_LOGICAL_RESET); + if (err) + goto out; + + for (pos = 0; pos < hba->nutrs; pos++) { + if (test_bit(pos, &hba->outstanding_reqs) && + (hba->lrb[tag].lun == hba->lrb[pos].lun)) { + + /* clear the respective UTRLCLR register bit */ + ufshcd_utrl_clear(hba, pos); + + clear_bit(pos, &hba->outstanding_reqs); + + if (hba->lrb[pos].cmd) { + scsi_dma_unmap(hba->lrb[pos].cmd); + hba->lrb[pos].cmd->result = + DID_ABORT << 16; + hba->lrb[pos].cmd->scsi_done(cmd); + hba->lrb[pos].cmd = NULL; + } + } + } /* end of for */ +out: + return err; +} + +/** + * ufshcd_host_reset - Main reset function registered with scsi layer + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_host_reset(struct scsi_cmnd *cmd) +{ + struct ufs_hba *hba; + + hba = shost_priv(cmd->device->host); + + if (hba->ufshcd_state == UFSHCD_STATE_RESET) + return SUCCESS; + + return (ufshcd_do_reset(hba) == SUCCESS) ? SUCCESS : FAILED; +} + +/** + * ufshcd_abort - abort a specific command + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + unsigned long flags; + unsigned int tag; + int err; + + host = cmd->device->host; + hba = shost_priv(host); + tag = cmd->request->tag; + + spin_lock_irqsave(host->host_lock, flags); + + /* check if command is still pending */ + if (!(test_bit(tag, &hba->outstanding_reqs))) { + err = FAILED; + spin_unlock_irqrestore(host->host_lock, flags); + goto out; + } + spin_unlock_irqrestore(host->host_lock, flags); + + err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_ABORT_TASK); + if (err) + goto out; + + scsi_dma_unmap(cmd); + + spin_lock_irqsave(host->host_lock, flags); + + /* clear the respective UTRLCLR register bit */ + ufshcd_utrl_clear(hba, tag); + + __clear_bit(tag, &hba->outstanding_reqs); + hba->lrb[tag].cmd = NULL; + spin_unlock_irqrestore(host->host_lock, flags); +out: + return err; +} + +static struct scsi_host_template ufshcd_driver_template = { + .module = THIS_MODULE, + .name = UFSHCD, + .proc_name = UFSHCD, + .queuecommand = ufshcd_queuecommand, + .slave_alloc = ufshcd_slave_alloc, + .slave_destroy = ufshcd_slave_destroy, + .eh_abort_handler = ufshcd_abort, + .eh_device_reset_handler = ufshcd_device_reset, + .eh_host_reset_handler = ufshcd_host_reset, + .this_id = -1, + .sg_tablesize = SG_ALL, + .cmd_per_lun = UFSHCD_CMD_PER_LUN, + .can_queue = UFSHCD_CAN_QUEUE, +}; + +/** + * ufshcd_shutdown - main function to put the controller in reset state + * @pdev: pointer to PCI device handle + */ +static void ufshcd_shutdown(struct pci_dev *pdev) +{ + ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); +} + +#ifdef CONFIG_PM +/** + * ufshcd_suspend - suspend power management function + * @pdev: pointer to PCI device handle + * @state: power state + * + * Returns -ENOSYS + */ +static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state) +{ + /* + * TODO: + * 1. Block SCSI requests from SCSI midlayer + * 2. Change the internal driver state to non operational + * 3. Set UTRLRSR and UTMRLRSR bits to zero + * 4. Wait until outstanding commands are completed + * 5. Set HCE to zero to send the UFS host controller to reset state + */ + + return -ENOSYS; +} + +/** + * ufshcd_resume - resume power management function + * @pdev: pointer to PCI device handle + * + * Returns -ENOSYS + */ +static int ufshcd_resume(struct pci_dev *pdev) +{ + /* + * TODO: + * 1. Set HCE to 1, to start the UFS host controller + * initialization process + * 2. Set UTRLRSR and UTMRLRSR bits to 1 + * 3. Change the internal driver state to operational + * 4. Unblock SCSI requests from SCSI midlayer + */ + + return -ENOSYS; +} +#endif /* CONFIG_PM */ + +/** + * ufshcd_hba_free - free allocated memory for + * host memory space data structures + * @hba: per adapter instance + */ +static void ufshcd_hba_free(struct ufs_hba *hba) +{ + iounmap(hba->mmio_base); + ufshcd_free_hba_memory(hba); + pci_release_regions(hba->pdev); +} + +/** + * ufshcd_remove - de-allocate PCI/SCSI host and host memory space + * data structure memory + * @pdev - pointer to PCI handle + */ +static void ufshcd_remove(struct pci_dev *pdev) +{ + struct ufs_hba *hba = pci_get_drvdata(pdev); + + /* disable interrupts */ + ufshcd_int_config(hba, UFSHCD_INT_DISABLE); + free_irq(pdev->irq, hba); + + ufshcd_hba_stop(hba); + ufshcd_hba_free(hba); + + scsi_remove_host(hba->host); + scsi_host_put(hba->host); + pci_set_drvdata(pdev, NULL); + pci_clear_master(pdev); + pci_disable_device(pdev); +} + +/** + * ufshcd_set_dma_mask - Set dma mask based on the controller + * addressing capability + * @pdev: PCI device structure + * + * Returns 0 for success, non-zero for failure + */ +static int ufshcd_set_dma_mask(struct ufs_hba *hba) +{ + int err; + u64 dma_mask; + + /* + * If controller supports 64 bit addressing mode, then set the DMA + * mask to 64-bit, else set the DMA mask to 32-bit + */ + if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) + dma_mask = DMA_BIT_MASK(64); + else + dma_mask = DMA_BIT_MASK(32); + + err = pci_set_dma_mask(hba->pdev, dma_mask); + if (err) + return err; + + err = pci_set_consistent_dma_mask(hba->pdev, dma_mask); + + return err; +} + +/** + * ufshcd_probe - probe routine of the driver + * @pdev: pointer to PCI device handle + * @id: PCI device id + * + * Returns 0 on success, non-zero value on failure + */ +static int __devinit +ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + int err; + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pci_enable_device failed\n"); + goto out_error; + } + + pci_set_master(pdev); + + host = scsi_host_alloc(&ufshcd_driver_template, + sizeof(struct ufs_hba)); + if (!host) { + dev_err(&pdev->dev, "scsi_host_alloc failed\n"); + err = -ENOMEM; + goto out_disable; + } + hba = shost_priv(host); + + err = pci_request_regions(pdev, UFSHCD); + if (err < 0) { + dev_err(&pdev->dev, "request regions failed\n"); + goto out_disable; + } + + hba->mmio_base = pci_ioremap_bar(pdev, 0); + if (!hba->mmio_base) { + dev_err(&pdev->dev, "memory map failed\n"); + err = -ENOMEM; + goto out_release_regions; + } + + hba->host = host; + hba->pdev = pdev; + + /* Read capabilities registers */ + ufshcd_hba_capabilities(hba); + + /* Get UFS version supported by the controller */ + hba->ufs_version = ufshcd_get_ufs_version(hba); + + err = ufshcd_set_dma_mask(hba); + if (err) { + dev_err(&pdev->dev, "set dma mask failed\n"); + goto out_iounmap; + } + + /* Allocate memory for host memory space */ + err = ufshcd_memory_alloc(hba); + if (err) { + dev_err(&pdev->dev, "Memory allocation failed\n"); + goto out_iounmap; + } + + /* Configure LRB */ + ufshcd_host_memory_configure(hba); + + host->can_queue = hba->nutrs; + host->cmd_per_lun = hba->nutrs; + host->max_id = UFSHCD_MAX_ID; + host->max_lun = UFSHCD_MAX_LUNS; + host->max_channel = UFSHCD_MAX_CHANNEL; + host->unique_id = host->host_no; + host->max_cmd_len = MAX_CDB_SIZE; + + /* Initailize wait queue for task management */ + init_waitqueue_head(&hba->ufshcd_tm_wait_queue); + + /* Initialize work queues */ + INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler); + INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler); + + /* IRQ registration */ + err = request_irq(pdev->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); + if (err) { + dev_err(&pdev->dev, "request irq failed\n"); + goto out_lrb_free; + } + + /* Enable SCSI tag mapping */ + err = scsi_init_shared_tag_map(host, host->can_queue); + if (err) { + dev_err(&pdev->dev, "init shared queue failed\n"); + goto out_free_irq; + } + + pci_set_drvdata(pdev, hba); + + err = scsi_add_host(host, &pdev->dev); + if (err) { + dev_err(&pdev->dev, "scsi_add_host failed\n"); + goto out_free_irq; + } + + /* Initialization routine */ + err = ufshcd_initialize_hba(hba); + if (err) { + dev_err(&pdev->dev, "Initialization failed\n"); + goto out_free_irq; + } + + return 0; + +out_free_irq: + free_irq(pdev->irq, hba); +out_lrb_free: + ufshcd_free_hba_memory(hba); +out_iounmap: + iounmap(hba->mmio_base); +out_release_regions: + pci_release_regions(pdev); +out_disable: + scsi_host_put(host); + pci_clear_master(pdev); + pci_disable_device(pdev); +out_error: + return err; +} + +static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = { + { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl); + +static struct pci_driver ufshcd_pci_driver = { + .name = UFSHCD, + .id_table = ufshcd_pci_tbl, + .probe = ufshcd_probe, + .remove = __devexit_p(ufshcd_remove), + .shutdown = ufshcd_shutdown, +#ifdef CONFIG_PM + .suspend = ufshcd_suspend, + .resume = ufshcd_resume, +#endif +}; + +/** + * ufshcd_init - Driver registration routine + */ +static int __init ufshcd_init(void) +{ + return pci_register_driver(&ufshcd_pci_driver); +} +module_init(ufshcd_init); + +/** + * ufshcd_exit - Driver exit clean-up routine + */ +static void __exit ufshcd_exit(void) +{ + pci_unregister_driver(&ufshcd_pci_driver); +} +module_exit(ufshcd_exit); + + +MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>, " + "Vinayak Holikatti <h.vinayak@samsung.com>"); +MODULE_DESCRIPTION("Generic UFS host controller driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h new file mode 100644 index 000000000000..6e3510f71167 --- /dev/null +++ b/drivers/scsi/ufs/ufshci.h @@ -0,0 +1,376 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshci.h + * Copyright (C) 2011-2012 Samsung India Software Operations + * + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef _UFSHCI_H +#define _UFSHCI_H + +enum { + TASK_REQ_UPIU_SIZE_DWORDS = 8, + TASK_RSP_UPIU_SIZE_DWORDS = 8, + ALIGNED_UPIU_SIZE = 128, +}; + +/* UFSHCI Registers */ +enum { + REG_CONTROLLER_CAPABILITIES = 0x00, + REG_UFS_VERSION = 0x08, + REG_CONTROLLER_DEV_ID = 0x10, + REG_CONTROLLER_PROD_ID = 0x14, + REG_INTERRUPT_STATUS = 0x20, + REG_INTERRUPT_ENABLE = 0x24, + REG_CONTROLLER_STATUS = 0x30, + REG_CONTROLLER_ENABLE = 0x34, + REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38, + REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C, + REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40, + REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44, + REG_UIC_ERROR_CODE_DME = 0x48, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C, + REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50, + REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54, + REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58, + REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60, + REG_UTP_TASK_REQ_LIST_BASE_L = 0x70, + REG_UTP_TASK_REQ_LIST_BASE_H = 0x74, + REG_UTP_TASK_REQ_DOOR_BELL = 0x78, + REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C, + REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80, + REG_UIC_COMMAND = 0x90, + REG_UIC_COMMAND_ARG_1 = 0x94, + REG_UIC_COMMAND_ARG_2 = 0x98, + REG_UIC_COMMAND_ARG_3 = 0x9C, +}; + +/* Controller capability masks */ +enum { + MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F, + MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000, + MASK_64_ADDRESSING_SUPPORT = 0x01000000, + MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000, + MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000, +}; + +/* UFS Version 08h */ +#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0) +#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16) + +/* Controller UFSHCI version */ +enum { + UFSHCI_VERSION_10 = 0x00010000, + UFSHCI_VERSION_11 = 0x00010100, +}; + +/* + * HCDDID - Host Controller Identification Descriptor + * - Device ID and Device Class 10h + */ +#define DEVICE_CLASS UFS_MASK(0xFFFF, 0) +#define DEVICE_ID UFS_MASK(0xFF, 24) + +/* + * HCPMID - Host Controller Identification Descriptor + * - Product/Manufacturer ID 14h + */ +#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0) +#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16) + +#define UFS_BIT(x) (1L << (x)) + +#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0) +#define UIC_DME_END_PT_RESET UFS_BIT(1) +#define UIC_ERROR UFS_BIT(2) +#define UIC_TEST_MODE UFS_BIT(3) +#define UIC_POWER_MODE UFS_BIT(4) +#define UIC_HIBERNATE_EXIT UFS_BIT(5) +#define UIC_HIBERNATE_ENTER UFS_BIT(6) +#define UIC_LINK_LOST UFS_BIT(7) +#define UIC_LINK_STARTUP UFS_BIT(8) +#define UTP_TASK_REQ_COMPL UFS_BIT(9) +#define UIC_COMMAND_COMPL UFS_BIT(10) +#define DEVICE_FATAL_ERROR UFS_BIT(11) +#define CONTROLLER_FATAL_ERROR UFS_BIT(16) +#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17) + +#define UFSHCD_ERROR_MASK (UIC_ERROR |\ + DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +/* HCS - Host Controller Status 30h */ +#define DEVICE_PRESENT UFS_BIT(0) +#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1) +#define UTP_TASK_REQ_LIST_READY UFS_BIT(2) +#define UIC_COMMAND_READY UFS_BIT(3) +#define HOST_ERROR_INDICATOR UFS_BIT(4) +#define DEVICE_ERROR_INDICATOR UFS_BIT(5) +#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8) + +/* HCE - Host Controller Enable 34h */ +#define CONTROLLER_ENABLE UFS_BIT(0) +#define CONTROLLER_DISABLE 0x0 + +/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */ +#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31) +#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F + +/* UECDL - Host UIC Error Code Data Link Layer 3Ch */ +#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31) +#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF +#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000 + +/* UECN - Host UIC Error Code Network Layer 40h */ +#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31) +#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7 + +/* UECT - Host UIC Error Code Transport Layer 44h */ +#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31) +#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F + +/* UECDME - Host UIC Error Code DME 48h */ +#define UIC_DME_ERROR UFS_BIT(31) +#define UIC_DME_ERROR_CODE_MASK 0x1 + +#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF +#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8) +#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16) +#define INT_AGGR_STATUS_BIT UFS_BIT(20) +#define INT_AGGR_PARAM_WRITE UFS_BIT(24) +#define INT_AGGR_ENABLE UFS_BIT(31) + +/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */ +#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0) + +/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */ +#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0) + +/* UICCMD - UIC Command */ +#define COMMAND_OPCODE_MASK 0xFF +#define GEN_SELECTOR_INDEX_MASK 0xFFFF + +#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16) +#define RESET_LEVEL 0xFF + +#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16) +#define CONFIG_RESULT_CODE_MASK 0xFF +#define GENERIC_ERROR_CODE_MASK 0xFF + +/* UIC Commands */ +enum { + UIC_CMD_DME_GET = 0x01, + UIC_CMD_DME_SET = 0x02, + UIC_CMD_DME_PEER_GET = 0x03, + UIC_CMD_DME_PEER_SET = 0x04, + UIC_CMD_DME_POWERON = 0x10, + UIC_CMD_DME_POWEROFF = 0x11, + UIC_CMD_DME_ENABLE = 0x12, + UIC_CMD_DME_RESET = 0x14, + UIC_CMD_DME_END_PT_RST = 0x15, + UIC_CMD_DME_LINK_STARTUP = 0x16, + UIC_CMD_DME_HIBER_ENTER = 0x17, + UIC_CMD_DME_HIBER_EXIT = 0x18, + UIC_CMD_DME_TEST_MODE = 0x1A, +}; + +/* UIC Config result code / Generic error code */ +enum { + UIC_CMD_RESULT_SUCCESS = 0x00, + UIC_CMD_RESULT_INVALID_ATTR = 0x01, + UIC_CMD_RESULT_FAILURE = 0x01, + UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02, + UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03, + UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04, + UIC_CMD_RESULT_BAD_INDEX = 0x05, + UIC_CMD_RESULT_LOCKED_ATTR = 0x06, + UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07, + UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08, + UIC_CMD_RESULT_BUSY = 0x09, + UIC_CMD_RESULT_DME_FAILURE = 0x0A, +}; + +#define MASK_UIC_COMMAND_RESULT 0xFF + +#define INT_AGGR_COUNTER_THRESHOLD_VALUE (0x1F << 8) +#define INT_AGGR_TIMEOUT_VALUE (0x02) + +/* Interrupt disable masks */ +enum { + /* Interrupt disable mask for UFSHCI v1.0 */ + INTERRUPT_DISABLE_MASK_10 = 0xFFFF, + + /* Interrupt disable mask for UFSHCI v1.1 */ + INTERRUPT_DISABLE_MASK_11 = 0x0, +}; + +/* + * Request Descriptor Definitions + */ + +/* Transfer request command type */ +enum { + UTP_CMD_TYPE_SCSI = 0x0, + UTP_CMD_TYPE_UFS = 0x1, + UTP_CMD_TYPE_DEV_MANAGE = 0x2, +}; + +enum { + UTP_SCSI_COMMAND = 0x00000000, + UTP_NATIVE_UFS_COMMAND = 0x10000000, + UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000, + UTP_REQ_DESC_INT_CMD = 0x01000000, +}; + +/* UTP Transfer Request Data Direction (DD) */ +enum { + UTP_NO_DATA_TRANSFER = 0x00000000, + UTP_HOST_TO_DEVICE = 0x02000000, + UTP_DEVICE_TO_HOST = 0x04000000, +}; + +/* Overall command status values */ +enum { + OCS_SUCCESS = 0x0, + OCS_INVALID_CMD_TABLE_ATTR = 0x1, + OCS_INVALID_PRDT_ATTR = 0x2, + OCS_MISMATCH_DATA_BUF_SIZE = 0x3, + OCS_MISMATCH_RESP_UPIU_SIZE = 0x4, + OCS_PEER_COMM_FAILURE = 0x5, + OCS_ABORTED = 0x6, + OCS_FATAL_ERROR = 0x7, + OCS_INVALID_COMMAND_STATUS = 0x0F, + MASK_OCS = 0x0F, +}; + +/** + * struct ufshcd_sg_entry - UFSHCI PRD Entry + * @base_addr: Lower 32bit physical address DW-0 + * @upper_addr: Upper 32bit physical address DW-1 + * @reserved: Reserved for future use DW-2 + * @size: size of physical segment DW-3 + */ +struct ufshcd_sg_entry { + u32 base_addr; + u32 upper_addr; + u32 reserved; + u32 size; +}; + +/** + * struct utp_transfer_cmd_desc - UFS Command Descriptor structure + * @command_upiu: Command UPIU Frame address + * @response_upiu: Response UPIU Frame address + * @prd_table: Physical Region Descriptor + */ +struct utp_transfer_cmd_desc { + u8 command_upiu[ALIGNED_UPIU_SIZE]; + u8 response_upiu[ALIGNED_UPIU_SIZE]; + struct ufshcd_sg_entry prd_table[SG_ALL]; +}; + +/** + * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD + * @dword0: Descriptor Header DW0 + * @dword1: Descriptor Header DW1 + * @dword2: Descriptor Header DW2 + * @dword3: Descriptor Header DW3 + */ +struct request_desc_header { + u32 dword_0; + u32 dword_1; + u32 dword_2; + u32 dword_3; +}; + +/** + * struct utp_transfer_req_desc - UTRD structure + * @header: UTRD header DW-0 to DW-3 + * @command_desc_base_addr_lo: UCD base address low DW-4 + * @command_desc_base_addr_hi: UCD base address high DW-5 + * @response_upiu_length: response UPIU length DW-6 + * @response_upiu_offset: response UPIU offset DW-6 + * @prd_table_length: Physical region descriptor length DW-7 + * @prd_table_offset: Physical region descriptor offset DW-7 + */ +struct utp_transfer_req_desc { + + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-5*/ + u32 command_desc_base_addr_lo; + u32 command_desc_base_addr_hi; + + /* DW 6 */ + u16 response_upiu_length; + u16 response_upiu_offset; + + /* DW 7 */ + u16 prd_table_length; + u16 prd_table_offset; +}; + +/** + * struct utp_task_req_desc - UTMRD structure + * @header: UTMRD header DW-0 to DW-3 + * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11 + * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19 + */ +struct utp_task_req_desc { + + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-11 */ + u32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS]; + + /* DW 12-19 */ + u32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS]; +}; + +#endif /* End of Header */ diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 7264116185d5..4411d4224401 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * - * Maintained by: Alok N Kataria <akataria@vmware.com> + * Maintained by: Arvind Kumar <arvindkumar@vmware.com> * */ @@ -1178,11 +1178,67 @@ static int __devinit pvscsi_allocate_sg(struct pvscsi_adapter *adapter) return 0; } +/* + * Query the device, fetch the config info and return the + * maximum number of targets on the adapter. In case of + * failure due to any reason return default i.e. 16. + */ +static u32 pvscsi_get_max_targets(struct pvscsi_adapter *adapter) +{ + struct PVSCSICmdDescConfigCmd cmd; + struct PVSCSIConfigPageHeader *header; + struct device *dev; + dma_addr_t configPagePA; + void *config_page; + u32 numPhys = 16; + + dev = pvscsi_dev(adapter); + config_page = pci_alloc_consistent(adapter->dev, PAGE_SIZE, + &configPagePA); + if (!config_page) { + dev_warn(dev, "vmw_pvscsi: failed to allocate memory for config page\n"); + goto exit; + } + BUG_ON(configPagePA & ~PAGE_MASK); + + /* Fetch config info from the device. */ + cmd.configPageAddress = ((u64)PVSCSI_CONFIG_CONTROLLER_ADDRESS) << 32; + cmd.configPageNum = PVSCSI_CONFIG_PAGE_CONTROLLER; + cmd.cmpAddr = configPagePA; + cmd._pad = 0; + + /* + * Mark the completion page header with error values. If the device + * completes the command successfully, it sets the status values to + * indicate success. + */ + header = config_page; + memset(header, 0, sizeof *header); + header->hostStatus = BTSTAT_INVPARAM; + header->scsiStatus = SDSTAT_CHECK; + + pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_CONFIG, &cmd, sizeof cmd); + + if (header->hostStatus == BTSTAT_SUCCESS && + header->scsiStatus == SDSTAT_GOOD) { + struct PVSCSIConfigPageController *config; + + config = config_page; + numPhys = config->numPhys; + } else + dev_warn(dev, "vmw_pvscsi: PVSCSI_CMD_CONFIG failed. hostStatus = 0x%x, scsiStatus = 0x%x\n", + header->hostStatus, header->scsiStatus); + pci_free_consistent(adapter->dev, PAGE_SIZE, config_page, configPagePA); +exit: + return numPhys; +} + static int __devinit pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct pvscsi_adapter *adapter; struct Scsi_Host *host; + struct device *dev; unsigned int i; unsigned long flags = 0; int error; @@ -1272,6 +1328,13 @@ static int __devinit pvscsi_probe(struct pci_dev *pdev, } /* + * Ask the device for max number of targets. + */ + host->max_id = pvscsi_get_max_targets(adapter); + dev = pvscsi_dev(adapter); + dev_info(dev, "vmw_pvscsi: host->max_id: %u\n", host->max_id); + + /* * From this point on we should reset the adapter if anything goes * wrong. */ diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h index 62e36e75715e..3546e8662e30 100644 --- a/drivers/scsi/vmw_pvscsi.h +++ b/drivers/scsi/vmw_pvscsi.h @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * - * Maintained by: Alok N Kataria <akataria@vmware.com> + * Maintained by: Arvind Kumar <arvindkumar@vmware.com> * */ @@ -26,7 +26,7 @@ #include <linux/types.h> -#define PVSCSI_DRIVER_VERSION_STRING "1.0.1.0-k" +#define PVSCSI_DRIVER_VERSION_STRING "1.0.2.0-k" #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128 @@ -39,28 +39,45 @@ * host adapter status/error codes */ enum HostBusAdapterStatus { - BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ - BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, - BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, - BTSTAT_DATA_UNDERRUN = 0x0c, - BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ - BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ - BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ - BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence requested by target */ - BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from first CCB */ - BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ - BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message rejected by target */ - BTSTAT_BADMSG = 0x1d, /* unsupported message received by the host adapter */ - BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ - BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, sent a SCSI RST */ - BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ - BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI RST */ - BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly (w/o tag) */ - BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ - BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ - BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ - BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ - BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ + BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ + BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, + BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, + BTSTAT_DATA_UNDERRUN = 0x0c, + BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ + BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ + BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ + BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence + * requested by target */ + BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from + * first CCB */ + BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment + * list */ + BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ + BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message + * rejected by target */ + BTSTAT_BADMSG = 0x1d, /* unsupported message received by the + * host adapter */ + BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ + BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, + * sent a SCSI RST */ + BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ + BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI + * RST */ + BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly + * (w/o tag) */ + BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ + BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ + BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ + BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ + BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ +}; + +/* + * SCSI device status values. + */ +enum ScsiDeviceStatus { + SDSTAT_GOOD = 0x00, /* No errors. */ + SDSTAT_CHECK = 0x02, /* Check condition. */ }; /* @@ -114,6 +131,29 @@ struct PVSCSICmdDescResetDevice { } __packed; /* + * Command descriptor for PVSCSI_CMD_CONFIG -- + */ + +struct PVSCSICmdDescConfigCmd { + u64 cmpAddr; + u64 configPageAddress; + u32 configPageNum; + u32 _pad; +} __packed; + +enum PVSCSIConfigPageType { + PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958, + PVSCSI_CONFIG_PAGE_PHY = 0x1959, + PVSCSI_CONFIG_PAGE_DEVICE = 0x195a, +}; + +enum PVSCSIConfigPageAddressType { + PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120, + PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121, + PVSCSI_CONFIG_PHY_ADDRESS = 0x2122, +}; + +/* * Command descriptor for PVSCSI_CMD_ABORT_CMD -- * * - currently does not support specifying the LUN. @@ -332,6 +372,27 @@ struct PVSCSIRingCmpDesc { u32 _pad[2]; } __packed; +struct PVSCSIConfigPageHeader { + u32 pageNum; + u16 numDwords; + u16 hostStatus; + u16 scsiStatus; + u16 reserved[3]; +} __packed; + +struct PVSCSIConfigPageController { + struct PVSCSIConfigPageHeader header; + u64 nodeWWN; /* Device name as defined in the SAS spec. */ + u16 manufacturer[64]; + u16 serialNumber[64]; + u16 opromVersion[32]; + u16 hwVersion[32]; + u16 firmwareVersion[32]; + u32 numPhys; + u8 useConsecutivePhyWWNs; + u8 reserved[3]; +} __packed; + /* * Interrupt status / IRQ bits. */ diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 082458d73ce9..d1a495f64e2d 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -63,12 +63,6 @@ struct chip_data { }; #ifdef CONFIG_DEBUG_FS -static int spi_show_regs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - #define SPI_REGS_BUFSIZE 1024 static ssize_t spi_show_regs(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -128,7 +122,7 @@ static ssize_t spi_show_regs(struct file *file, char __user *user_buf, static const struct file_operations mrst_spi_regs_ops = { .owner = THIS_MODULE, - .open = spi_show_regs_open, + .open = simple_open, .read = spi_show_regs, .llseek = default_llseek, }; diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 08a3b1133d29..eb1dee26bda3 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -27,13 +27,14 @@ config ANDROID_LOGGER config ANDROID_PERSISTENT_RAM bool + depends on HAVE_MEMBLOCK select REED_SOLOMON select REED_SOLOMON_ENC8 select REED_SOLOMON_DEC8 config ANDROID_RAM_CONSOLE bool "Android RAM buffer console" - depends on !S390 && !UML + depends on !S390 && !UML && HAVE_MEMBLOCK select ANDROID_PERSISTENT_RAM default n diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c index 052b43e4e505..b91e4bc332a7 100644 --- a/drivers/staging/android/lowmemorykiller.c +++ b/drivers/staging/android/lowmemorykiller.c @@ -55,7 +55,6 @@ static int lowmem_minfree[6] = { }; static int lowmem_minfree_size = 4; -static struct task_struct *lowmem_deathpending; static unsigned long lowmem_deathpending_timeout; #define lowmem_print(level, x...) \ @@ -64,24 +63,6 @@ static unsigned long lowmem_deathpending_timeout; printk(x); \ } while (0) -static int -task_notify_func(struct notifier_block *self, unsigned long val, void *data); - -static struct notifier_block task_nb = { - .notifier_call = task_notify_func, -}; - -static int -task_notify_func(struct notifier_block *self, unsigned long val, void *data) -{ - struct task_struct *task = data; - - if (task == lowmem_deathpending) - lowmem_deathpending = NULL; - - return NOTIFY_OK; -} - static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) { struct task_struct *tsk; @@ -97,19 +78,6 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) int other_file = global_page_state(NR_FILE_PAGES) - global_page_state(NR_SHMEM); - /* - * If we already have a death outstanding, then - * bail out right away; indicating to vmscan - * that we have nothing further to offer on - * this pass. - * - * Note: Currently you need CONFIG_PROFILING - * for this to work correctly. - */ - if (lowmem_deathpending && - time_before_eq(jiffies, lowmem_deathpending_timeout)) - return 0; - if (lowmem_adj_size < array_size) array_size = lowmem_adj_size; if (lowmem_minfree_size < array_size) @@ -148,6 +116,12 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) if (!p) continue; + if (test_tsk_thread_flag(p, TIF_MEMDIE) && + time_before_eq(jiffies, lowmem_deathpending_timeout)) { + task_unlock(p); + rcu_read_unlock(); + return 0; + } oom_score_adj = p->signal->oom_score_adj; if (oom_score_adj < min_score_adj) { task_unlock(p); @@ -174,15 +148,9 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) lowmem_print(1, "send sigkill to %d (%s), adj %d, size %d\n", selected->pid, selected->comm, selected_oom_score_adj, selected_tasksize); - /* - * If CONFIG_PROFILING is off, then we don't want to stall - * the killer by setting lowmem_deathpending. - */ -#ifdef CONFIG_PROFILING - lowmem_deathpending = selected; lowmem_deathpending_timeout = jiffies + HZ; -#endif send_sig(SIGKILL, selected, 0); + set_tsk_thread_flag(selected, TIF_MEMDIE); rem -= selected_tasksize; } lowmem_print(4, "lowmem_shrink %lu, %x, return %d\n", @@ -198,7 +166,6 @@ static struct shrinker lowmem_shrinker = { static int __init lowmem_init(void) { - task_handoff_register(&task_nb); register_shrinker(&lowmem_shrinker); return 0; } @@ -206,7 +173,6 @@ static int __init lowmem_init(void) static void __exit lowmem_exit(void) { unregister_shrinker(&lowmem_shrinker); - task_handoff_unregister(&task_nb); } module_param_named(cost, lowmem_shrinker.seeks, int, S_IRUGO | S_IWUSR); diff --git a/drivers/staging/android/persistent_ram.c b/drivers/staging/android/persistent_ram.c index e08f2574e30a..8d8c1e33e0ff 100644 --- a/drivers/staging/android/persistent_ram.c +++ b/drivers/staging/android/persistent_ram.c @@ -399,12 +399,12 @@ static __init struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc) { struct persistent_ram_zone *prz; - int ret; + int ret = -ENOMEM; prz = kzalloc(sizeof(struct persistent_ram_zone), GFP_KERNEL); if (!prz) { pr_err("persistent_ram: failed to allocate persistent ram zone\n"); - return ERR_PTR(-ENOMEM); + goto err; } INIT_LIST_HEAD(&prz->node); @@ -412,13 +412,13 @@ struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc) ret = persistent_ram_buffer_init(dev_name(dev), prz); if (ret) { pr_err("persistent_ram: failed to initialize buffer\n"); - return ERR_PTR(ret); + goto err; } prz->ecc = ecc; ret = persistent_ram_init_ecc(prz, prz->buffer_size); if (ret) - return ERR_PTR(ret); + goto err; if (prz->buffer->sig == PERSISTENT_RAM_SIG) { if (buffer_size(prz) > prz->buffer_size || @@ -442,6 +442,9 @@ struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc) atomic_set(&prz->buffer->size, 0); return prz; +err: + kfree(prz); + return ERR_PTR(ret); } struct persistent_ram_zone * __init diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index bc723eff11af..45c522cbe784 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -85,7 +85,7 @@ static int timed_gpio_probe(struct platform_device *pdev) struct timed_gpio_platform_data *pdata = pdev->dev.platform_data; struct timed_gpio *cur_gpio; struct timed_gpio_data *gpio_data, *gpio_dat; - int i, j, ret = 0; + int i, ret; if (!pdata) return -EBUSY; @@ -108,18 +108,12 @@ static int timed_gpio_probe(struct platform_device *pdev) gpio_dat->dev.get_time = gpio_get_time; gpio_dat->dev.enable = gpio_enable; ret = gpio_request(cur_gpio->gpio, cur_gpio->name); - if (ret >= 0) { - ret = timed_output_dev_register(&gpio_dat->dev); - if (ret < 0) - gpio_free(cur_gpio->gpio); - } + if (ret < 0) + goto err_out; + ret = timed_output_dev_register(&gpio_dat->dev); if (ret < 0) { - for (j = 0; j < i; j++) { - timed_output_dev_unregister(&gpio_data[i].dev); - gpio_free(gpio_data[i].gpio); - } - kfree(gpio_data); - return ret; + gpio_free(cur_gpio->gpio); + goto err_out; } gpio_dat->gpio = cur_gpio->gpio; @@ -131,6 +125,15 @@ static int timed_gpio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, gpio_data); return 0; + +err_out: + while (--i >= 0) { + timed_output_dev_unregister(&gpio_data[i].dev); + gpio_free(gpio_data[i].gpio); + } + kfree(gpio_data); + + return ret; } static int timed_gpio_remove(struct platform_device *pdev) diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README index 0d82a6d5fa58..2d721232467a 100644 --- a/drivers/staging/asus_oled/README +++ b/drivers/staging/asus_oled/README @@ -52,7 +52,7 @@ Configuration There is only one option: start_off. You can use it by: 'modprobe asus_oled start_off=1', or by adding this - line to /etc/modprobe.conf: + line to /etc/modprobe.d/asus_oled.conf: options asus_oled start_off=1 With this option provided, asus_oled driver will switch off the display diff --git a/drivers/staging/iio/inkern.c b/drivers/staging/iio/inkern.c index de2c8ea64965..ef07a02bf542 100644 --- a/drivers/staging/iio/inkern.c +++ b/drivers/staging/iio/inkern.c @@ -82,6 +82,7 @@ int iio_map_array_unregister(struct iio_dev *indio_dev, ret = -ENODEV; goto error_ret; } + i++; } error_ret: mutex_unlock(&iio_map_list_lock); diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c index d5ddac3d8831..ebc2d0840caf 100644 --- a/drivers/staging/iio/magnetometer/ak8975.c +++ b/drivers/staging/iio/magnetometer/ak8975.c @@ -108,7 +108,8 @@ static const int ak8975_index_to_reg[] = { static int ak8975_write_data(struct i2c_client *client, u8 reg, u8 val, u8 mask, u8 shift) { - struct ak8975_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ak8975_data *data = iio_priv(indio_dev); u8 regval; int ret; @@ -159,7 +160,8 @@ static int ak8975_read_data(struct i2c_client *client, */ static int ak8975_setup(struct i2c_client *client) { - struct ak8975_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ak8975_data *data = iio_priv(indio_dev); u8 device_id; int ret; @@ -509,6 +511,7 @@ static int ak8975_probe(struct i2c_client *client, goto exit_gpio; } data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); /* Perform some basic start-of-day setup of the device. */ err = ak8975_setup(client); if (err < 0) { @@ -516,7 +519,6 @@ static int ak8975_probe(struct i2c_client *client, goto exit_free_iio; } - i2c_set_clientdata(client, indio_dev); data->client = client; mutex_init(&data->lock); data->eoc_irq = client->irq; diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c index 91dd3da70cb4..e00b416c4d33 100644 --- a/drivers/staging/iio/magnetometer/hmc5843.c +++ b/drivers/staging/iio/magnetometer/hmc5843.c @@ -521,7 +521,9 @@ static int hmc5843_detect(struct i2c_client *client, /* Called when we have found a new HMC5843. */ static void hmc5843_init_client(struct i2c_client *client) { - struct hmc5843_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hmc5843_data *data = iio_priv(indio_dev); + hmc5843_set_meas_conf(client, data->meas_conf); hmc5843_set_rate(client, data->rate); hmc5843_configure(client, data->operating_mode); diff --git a/drivers/staging/media/as102/as102_fw.c b/drivers/staging/media/as102/as102_fw.c index 43ebc43e6b9a..1075fb1df0d9 100644 --- a/drivers/staging/media/as102/as102_fw.c +++ b/drivers/staging/media/as102/as102_fw.c @@ -165,7 +165,7 @@ error: int as102_fw_upload(struct as10x_bus_adapter_t *bus_adap) { int errno = -EFAULT; - const struct firmware *firmware; + const struct firmware *firmware = NULL; unsigned char *cmd_buf = NULL; char *fw1, *fw2; struct usb_device *dev = bus_adap->usb_dev; diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c index 3df5b4c58ecd..620b8d54223d 100644 --- a/drivers/staging/omapdrm/omap_drv.c +++ b/drivers/staging/omapdrm/omap_drv.c @@ -803,9 +803,6 @@ static void pdev_shutdown(struct platform_device *device) static int pdev_probe(struct platform_device *device) { DBG("%s", device->name); - if (platform_driver_register(&omap_dmm_driver)) - dev_err(&device->dev, "DMM registration failed\n"); - return drm_platform_init(&omap_drm_driver, device); } @@ -833,6 +830,10 @@ struct platform_driver pdev = { static int __init omap_drm_init(void) { DBG("init"); + if (platform_driver_register(&omap_dmm_driver)) { + /* we can continue on without DMM.. so not fatal */ + dev_err(NULL, "DMM registration failed\n"); + } return platform_driver_register(&pdev); } diff --git a/drivers/staging/ozwpan/TODO b/drivers/staging/ozwpan/TODO index f7a9c122f596..c2d30a7112f3 100644 --- a/drivers/staging/ozwpan/TODO +++ b/drivers/staging/ozwpan/TODO @@ -8,5 +8,7 @@ TODO: - code review by USB developer community. - testing with as many devices as possible. -Please send any patches for this driver to Chris Kelly <ckelly@ozmodevices.com> +Please send any patches for this driver to +Rupesh Gujare <rgujare@ozmodevices.com> +Chris Kelly <ckelly@ozmodevices.com> and Greg Kroah-Hartman <gregkh@linuxfoundation.org>. diff --git a/drivers/staging/ramster/Kconfig b/drivers/staging/ramster/Kconfig index 8b57b87edda4..4af1f8d4b953 100644 --- a/drivers/staging/ramster/Kconfig +++ b/drivers/staging/ramster/Kconfig @@ -1,10 +1,6 @@ -# Dependency on CONFIG_BROKEN is because there is a commit dependency -# on a cleancache naming change to be submitted by Konrad Wilk -# a39c00ded70339603ffe1b0ffdf3ade85bcf009a "Merge branch 'stable/cleancache.v13' -# into linux-next. Once this commit is present, BROKEN can be removed config RAMSTER bool "Cross-machine RAM capacity sharing, aka peer-to-peer tmem" - depends on (CLEANCACHE || FRONTSWAP) && CONFIGFS_FS=y && !ZCACHE && !XVMALLOC && !HIGHMEM && BROKEN + depends on (CLEANCACHE || FRONTSWAP) && CONFIGFS_FS=y && !ZCACHE && !XVMALLOC && !HIGHMEM select LZO_COMPRESS select LZO_DECOMPRESS default n diff --git a/drivers/staging/rts_pstor/ms.c b/drivers/staging/rts_pstor/ms.c index 66341dff8c99..f9a4498984cc 100644 --- a/drivers/staging/rts_pstor/ms.c +++ b/drivers/staging/rts_pstor/ms.c @@ -3498,7 +3498,8 @@ static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 log_blk++; - for (seg_no = 0; seg_no < sizeof(ms_start_idx)/2; seg_no++) { + for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1; + seg_no++) { if (log_blk < ms_start_idx[seg_no+1]) break; } diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c index a7feb3e328a0..1dccd933a7e4 100644 --- a/drivers/staging/rts_pstor/rtsx.c +++ b/drivers/staging/rts_pstor/rtsx.c @@ -1000,6 +1000,11 @@ static int __devinit rtsx_probe(struct pci_dev *pci, rtsx_init_chip(dev->chip); + /* set the supported max_lun and max_id for the scsi host + * NOTE: the minimal value of max_id is 1 */ + host->max_id = 1; + host->max_lun = dev->chip->max_lun; + /* Start up our control thread */ th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME); if (IS_ERR(th)) { diff --git a/drivers/staging/rts_pstor/rtsx_transport.c b/drivers/staging/rts_pstor/rtsx_transport.c index 4e3d2c106af0..9b2e5c99870f 100644 --- a/drivers/staging/rts_pstor/rtsx_transport.c +++ b/drivers/staging/rts_pstor/rtsx_transport.c @@ -335,6 +335,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card, int sg_cnt, i, resid; int err = 0; long timeleft; + struct scatterlist *sg_ptr; u32 val = TRIG_DMA; if ((sg == NULL) || (num_sg <= 0) || !offset || !index) @@ -371,7 +372,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card, sg_cnt = dma_map_sg(&(rtsx->pci->dev), sg, num_sg, dma_dir); resid = size; - + sg_ptr = sg; chip->sgi = 0; /* Usually the next entry will be @sg@ + 1, but if this sg element * is part of a chained scatterlist, it could jump to the start of @@ -379,14 +380,14 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card, * the proper sg */ for (i = 0; i < *index; i++) - sg = sg_next(sg); + sg_ptr = sg_next(sg_ptr); for (i = *index; i < sg_cnt; i++) { dma_addr_t addr; unsigned int len; u8 option; - addr = sg_dma_address(sg); - len = sg_dma_len(sg); + addr = sg_dma_address(sg_ptr); + len = sg_dma_len(sg_ptr); RTSX_DEBUGP("DMA addr: 0x%x, Len: 0x%x\n", (unsigned int)addr, len); @@ -415,7 +416,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card, if (!resid) break; - sg = sg_next(sg); + sg_ptr = sg_next(sg_ptr); } RTSX_DEBUGP("SG table count = %d\n", chip->sgi); diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c index ad54c2e5c932..f1701bc6e312 100644 --- a/drivers/staging/sep/sep_main.c +++ b/drivers/staging/sep/sep_main.c @@ -3114,7 +3114,7 @@ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) current->pid); if (1 == test_bit(SEP_LEGACY_SENDMSG_DONE_OFFSET, &call_status->status)) { - dev_warn(&sep->pdev->dev, + dev_dbg(&sep->pdev->dev, "[PID%d] dcb prep needed before send msg\n", current->pid); error = -EPROTO; @@ -3122,9 +3122,9 @@ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) } if (!arg) { - dev_warn(&sep->pdev->dev, + dev_dbg(&sep->pdev->dev, "[PID%d] dcb null arg\n", current->pid); - error = EINVAL; + error = -EINVAL; goto end_function; } diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c index 9fedc442a779..573c80003f0c 100644 --- a/drivers/staging/vme/devices/vme_pio2_core.c +++ b/drivers/staging/vme/devices/vme_pio2_core.c @@ -35,10 +35,10 @@ static int vector[PIO2_CARDS_MAX]; static int vector_num; static int level[PIO2_CARDS_MAX]; static int level_num; -static const char *variant[PIO2_CARDS_MAX]; +static char *variant[PIO2_CARDS_MAX]; static int variant_num; -static int loopback; +static bool loopback; static int pio2_match(struct vme_dev *); static int __devinit pio2_probe(struct vme_dev *); diff --git a/drivers/staging/vt6655/key.c b/drivers/staging/vt6655/key.c index 0ff8d7bbf2a7..774b0d4a7e06 100644 --- a/drivers/staging/vt6655/key.c +++ b/drivers/staging/vt6655/key.c @@ -655,6 +655,9 @@ bool KeybSetDefaultKey ( return (false); } + if (uKeyLength > MAX_KEY_LEN) + return false; + pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = true; for(ii=0;ii<ETH_ALEN;ii++) pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID[ii] = 0xFF; diff --git a/drivers/staging/vt6656/ioctl.c b/drivers/staging/vt6656/ioctl.c index 1463d76895f0..d59456c29df1 100644 --- a/drivers/staging/vt6656/ioctl.c +++ b/drivers/staging/vt6656/ioctl.c @@ -565,7 +565,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) result = -ENOMEM; break; } - pNodeList = (PSNodeList)kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC); + pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC); if (pNodeList == NULL) { result = -ENOMEM; break; @@ -601,6 +601,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) } } if (copy_to_user(pReq->data, pNodeList, sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)))) { + kfree(pNodeList); result = -EFAULT; break; } diff --git a/drivers/staging/vt6656/key.c b/drivers/staging/vt6656/key.c index 27bb523c8a97..ee62a06a75f4 100644 --- a/drivers/staging/vt6656/key.c +++ b/drivers/staging/vt6656/key.c @@ -684,6 +684,9 @@ BOOL KeybSetDefaultKey( return (FALSE); } + if (uKeyLength > MAX_KEY_LEN) + return false; + pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = TRUE; for (ii = 0; ii < ETH_ALEN; ii++) pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID[ii] = 0xFF; diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c index 94d5c35e22fb..3650bbff7686 100644 --- a/drivers/staging/xgifb/vb_init.c +++ b/drivers/staging/xgifb/vb_init.c @@ -61,7 +61,7 @@ XGINew_GetXG20DRAMType(struct xgi_hw_device_info *HwDeviceExtension, } temp = xgifb_reg_get(pVBInfo->P3c4, 0x3B); /* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */ - if ((temp & 0x88) == 0x80) + if (((temp & 0x88) == 0x80) || ((temp & 0x88) == 0x08)) data = 0; /* DDR */ else data = 1; /* DDRII */ diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c index 2919924213c4..60d4adf99923 100644 --- a/drivers/staging/xgifb/vb_setmode.c +++ b/drivers/staging/xgifb/vb_setmode.c @@ -152,6 +152,7 @@ void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo) pVBInfo->pXGINew_CR97 = &XG20_CR97; if (ChipType == XG27) { + unsigned char temp; pVBInfo->MCLKData = (struct SiS_MCLKData *) XGI27New_MCLKData; pVBInfo->CR40 = XGI27_cr41; @@ -162,7 +163,13 @@ void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo) pVBInfo->pCRDE = XG27_CRDE; pVBInfo->pSR40 = &XG27_SR40; pVBInfo->pSR41 = &XG27_SR41; + pVBInfo->SR15 = XG27_SR13; + /*Z11m DDR*/ + temp = xgifb_reg_get(pVBInfo->P3c4, 0x3B); + /* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */ + if (((temp & 0x88) == 0x80) || ((temp & 0x88) == 0x08)) + pVBInfo->pXGINew_CR97 = &Z11m_CR97; } if (ChipType >= XG20) { diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h index dddf261ed53d..e8d6f674b274 100644 --- a/drivers/staging/xgifb/vb_table.h +++ b/drivers/staging/xgifb/vb_table.h @@ -33,6 +33,13 @@ static struct XGI_ECLKDataStruct XGI340_ECLKData[] = { {0x5c, 0x23, 0x01, 166} }; +static unsigned char XG27_SR13[4][8] = { + {0x35, 0x45, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR13 */ + {0x41, 0x51, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR14 */ + {0x32, 0x32, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR18 */ + {0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00} /* SR1B */ +}; + static unsigned char XGI340_SR13[4][8] = { {0x35, 0x45, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR13 */ {0x41, 0x51, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR14 */ @@ -71,7 +78,7 @@ static unsigned char XGI27_cr41[24][8] = { {0x20, 0x40, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 0 CR41 */ {0xC4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 1 CR8A */ {0xC4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 2 CR8B */ - {0xB5, 0x13, 0xa4, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 3 CR40[7], + {0xB3, 0x13, 0xa4, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 3 CR40[7], CR99[2:0], CR45[3:0]*/ {0xf0, 0xf5, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 4 CR59 */ @@ -2803,6 +2810,8 @@ static unsigned char XG27_CRDE[2]; static unsigned char XG27_SR40 = 0x04 ; static unsigned char XG27_SR41 = 0x00 ; +static unsigned char Z11m_CR97 = 0x80 ; + static struct XGI330_VCLKDataStruct XGI_VCLKData[] = { /* SR2B,SR2C,SR2D */ {0x1B, 0xE1, 25}, /* 00 (25.175MHz) */ diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c index 09caa4f2687e..917461c66014 100644 --- a/drivers/staging/zsmalloc/zsmalloc-main.c +++ b/drivers/staging/zsmalloc/zsmalloc-main.c @@ -267,33 +267,39 @@ static unsigned long obj_idx_to_offset(struct page *page, return off + obj_idx * class_size; } +static void reset_page(struct page *page) +{ + clear_bit(PG_private, &page->flags); + clear_bit(PG_private_2, &page->flags); + set_page_private(page, 0); + page->mapping = NULL; + page->freelist = NULL; + reset_page_mapcount(page); +} + static void free_zspage(struct page *first_page) { - struct page *nextp, *tmp; + struct page *nextp, *tmp, *head_extra; BUG_ON(!is_first_page(first_page)); BUG_ON(first_page->inuse); - nextp = (struct page *)page_private(first_page); + head_extra = (struct page *)page_private(first_page); - clear_bit(PG_private, &first_page->flags); - clear_bit(PG_private_2, &first_page->flags); - set_page_private(first_page, 0); - first_page->mapping = NULL; - first_page->freelist = NULL; - reset_page_mapcount(first_page); + reset_page(first_page); __free_page(first_page); /* zspage with only 1 system page */ - if (!nextp) + if (!head_extra) return; - list_for_each_entry_safe(nextp, tmp, &nextp->lru, lru) { + list_for_each_entry_safe(nextp, tmp, &head_extra->lru, lru) { list_del(&nextp->lru); - clear_bit(PG_private_2, &nextp->flags); - nextp->index = 0; + reset_page(nextp); __free_page(nextp); } + reset_page(head_extra); + __free_page(head_extra); } /* Initialize a newly allocated zspage */ diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index 830657908db8..c5eb3c33c3db 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -122,6 +122,7 @@ struct ft_cmd { /* Local sense buffer */ unsigned char ft_sense_buffer[TRANSPORT_SENSE_BUFFER]; u32 was_ddp_setup:1; /* Set only if ddp is setup */ + u32 aborted:1; /* Set if aborted by reset or timeout */ struct scatterlist *sg; /* Set only if DDP is setup */ u32 sg_cnt; /* No. of item in scatterlist */ }; diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 62dec9715ce5..a375f257aabc 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -121,6 +121,8 @@ int ft_queue_status(struct se_cmd *se_cmd) struct fc_exch *ep; size_t len; + if (cmd->aborted) + return 0; ft_dump_cmd(cmd, __func__); ep = fc_seq_exch(cmd->seq); lport = ep->lp; @@ -187,6 +189,8 @@ int ft_write_pending(struct se_cmd *se_cmd) ft_dump_cmd(cmd, __func__); + if (cmd->aborted) + return 0; ep = fc_seq_exch(cmd->seq); lport = ep->lp; fp = fc_frame_alloc(lport, sizeof(*txrdy)); @@ -252,10 +256,10 @@ static void ft_recv_seq(struct fc_seq *sp, struct fc_frame *fp, void *arg) struct ft_cmd *cmd = arg; struct fc_frame_header *fh; - if (IS_ERR(fp)) { + if (unlikely(IS_ERR(fp))) { /* XXX need to find cmd if queued */ cmd->seq = NULL; - transport_generic_free_cmd(&cmd->se_cmd, 0); + cmd->aborted = true; return; } @@ -399,6 +403,8 @@ int ft_queue_tm_resp(struct se_cmd *se_cmd) struct se_tmr_req *tmr = se_cmd->se_tmr_req; enum fcp_resp_rsp_codes code; + if (cmd->aborted) + return 0; switch (tmr->response) { case TMR_FUNCTION_COMPLETE: code = FCP_TMF_CMPL; diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index f357039349ba..2948dc944619 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -300,6 +300,7 @@ static struct se_portal_group *ft_add_tpg( { struct ft_lport_acl *lacl; struct ft_tpg *tpg; + struct workqueue_struct *wq; unsigned long index; int ret; @@ -321,18 +322,20 @@ static struct se_portal_group *ft_add_tpg( tpg->lport_acl = lacl; INIT_LIST_HEAD(&tpg->lun_list); - ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg, - tpg, TRANSPORT_TPG_TYPE_NORMAL); - if (ret < 0) { + wq = alloc_workqueue("tcm_fc", 0, 1); + if (!wq) { kfree(tpg); return NULL; } - tpg->workqueue = alloc_workqueue("tcm_fc", 0, 1); - if (!tpg->workqueue) { + ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg, + tpg, TRANSPORT_TPG_TYPE_NORMAL); + if (ret < 0) { + destroy_workqueue(wq); kfree(tpg); return NULL; } + tpg->workqueue = wq; mutex_lock(&ft_lport_lock); list_add_tail(&tpg->list, &lacl->tpg_list); diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c index 2b693eefac55..dc7c0db26e20 100644 --- a/drivers/target/tcm_fc/tfc_io.c +++ b/drivers/target/tcm_fc/tfc_io.c @@ -81,6 +81,8 @@ int ft_queue_data_in(struct se_cmd *se_cmd) void *from; void *to = NULL; + if (cmd->aborted) + return 0; ep = fc_seq_exch(cmd->seq); lport = ep->lp; cmd->seq = lport->tt.seq_start_next(cmd->seq); diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f7f71b2d3101..514a691abea0 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -18,3 +18,11 @@ config THERMAL_HWMON depends on THERMAL depends on HWMON=y || HWMON=THERMAL default y + +config SPEAR_THERMAL + bool "SPEAr thermal sensor driver" + depends on THERMAL + depends on PLAT_SPEAR + help + Enable this to plug the SPEAr thermal sensor driver into the Linux + thermal framework diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 31108a01c22e..a9fff0bf4b14 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o +obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
\ No newline at end of file diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c new file mode 100644 index 000000000000..c2e32df3b164 --- /dev/null +++ b/drivers/thermal/spear_thermal.c @@ -0,0 +1,206 @@ +/* + * SPEAr thermal driver. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino <vincenzo.frascino@st.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/platform_data/spear_thermal.h> +#include <linux/thermal.h> + +#define MD_FACTOR 1000 + +/* SPEAr Thermal Sensor Dev Structure */ +struct spear_thermal_dev { + /* pointer to base address of the thermal sensor */ + void __iomem *thermal_base; + /* clk structure */ + struct clk *clk; + /* pointer to thermal flags */ + unsigned int flags; +}; + +static inline int thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct spear_thermal_dev *stdev = thermal->devdata; + + /* + * Data are ready to be read after 628 usec from POWERDOWN signal + * (PDN) = 1 + */ + *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR; + return 0; +} + +static struct thermal_zone_device_ops ops = { + .get_temp = thermal_get_temp, +}; + +#ifdef CONFIG_PM +static int spear_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + dev_info(dev, "Suspended.\n"); + + return 0; +} + +static int spear_thermal_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + int ret = 0; + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + return ret; + } + + /* Enable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base); + + dev_info(dev, "Resumed.\n"); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend, + spear_thermal_resume); + +static int spear_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *spear_thermal = NULL; + struct spear_thermal_dev *stdev; + struct spear_thermal_pdata *pdata; + int ret = 0; + struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!stres) { + dev_err(&pdev->dev, "memory resource missing\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "platform data is NULL\n"); + return -EINVAL; + } + + stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); + if (!stdev) { + dev_err(&pdev->dev, "kzalloc fail\n"); + return -ENOMEM; + } + + /* Enable thermal sensor */ + stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start, + resource_size(stres)); + if (!stdev->thermal_base) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + stdev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(stdev->clk)) { + dev_err(&pdev->dev, "Can't get clock\n"); + return PTR_ERR(stdev->clk); + } + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + goto put_clk; + } + + stdev->flags = pdata->thermal_flags; + writel_relaxed(stdev->flags, stdev->thermal_base); + + spear_thermal = thermal_zone_device_register("spear_thermal", 0, + stdev, &ops, 0, 0, 0, 0); + if (IS_ERR(spear_thermal)) { + dev_err(&pdev->dev, "thermal zone device is NULL\n"); + ret = PTR_ERR(spear_thermal); + goto disable_clk; + } + + platform_set_drvdata(pdev, spear_thermal); + + dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n", + stdev->thermal_base); + + return 0; + +disable_clk: + clk_disable(stdev->clk); +put_clk: + clk_put(stdev->clk); + + return ret; +} + +static int spear_thermal_exit(struct platform_device *pdev) +{ + unsigned int actual_mask = 0; + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + + thermal_zone_device_unregister(spear_thermal); + platform_set_drvdata(pdev, NULL); + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + clk_put(stdev->clk); + + return 0; +} + +static struct platform_driver spear_thermal_driver = { + .probe = spear_thermal_probe, + .remove = spear_thermal_exit, + .driver = { + .name = "spear_thermal", + .owner = THIS_MODULE, + .pm = &spear_thermal_pm_ops, + }, +}; + +module_platform_driver(spear_thermal_driver); + +MODULE_AUTHOR("Vincenzo Frascino <vincenzo.frascino@st.com>"); +MODULE_DESCRIPTION("SPEAr thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 220ce7e31cf5..022bacb71a7e 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -23,6 +23,8 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/device.h> #include <linux/err.h> @@ -39,8 +41,6 @@ MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); -#define PREFIX "Thermal: " - struct thermal_cooling_device_instance { int id; char name[THERMAL_NAME_LENGTH]; @@ -60,13 +60,11 @@ static LIST_HEAD(thermal_tz_list); static LIST_HEAD(thermal_cdev_list); static DEFINE_MUTEX(thermal_list_lock); -static unsigned int thermal_event_seqnum; - static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; - again: +again: if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0)) return -ENOMEM; @@ -152,9 +150,9 @@ mode_store(struct device *dev, struct device_attribute *attr, if (!tz->ops->set_mode) return -EPERM; - if (!strncmp(buf, "enabled", sizeof("enabled"))) + if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); - else if (!strncmp(buf, "disabled", sizeof("disabled"))) + else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); else result = -EINVAL; @@ -283,8 +281,7 @@ passive_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); -static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \ - passive_store); +static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL), @@ -313,22 +310,6 @@ static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL), }; -#define TRIP_POINT_ATTR_ADD(_dev, _index, result) \ -do { \ - result = device_create_file(_dev, \ - &trip_point_attrs[_index * 2]); \ - if (result) \ - break; \ - result = device_create_file(_dev, \ - &trip_point_attrs[_index * 2 + 1]); \ -} while (0) - -#define TRIP_POINT_ATTR_REMOVE(_dev, _index) \ -do { \ - device_remove_file(_dev, &trip_point_attrs[_index * 2]); \ - device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \ -} while (0) - /* sys I/F for cooling device */ #define to_cooling_device(_dev) \ container_of(_dev, struct thermal_cooling_device, device) @@ -835,15 +816,14 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, return 0; device_remove_file(&tz->device, &dev->attr); - remove_symbol_link: +remove_symbol_link: sysfs_remove_link(&tz->device.kobj, dev->name); - release_idr: +release_idr: release_idr(&tz->idr, &tz->lock, dev->id); - free_mem: +free_mem: kfree(dev); return result; } - EXPORT_SYMBOL(thermal_zone_bind_cooling_device); /** @@ -873,14 +853,13 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, return -ENODEV; - unbind: +unbind: device_remove_file(&tz->device, &pos->attr); sysfs_remove_link(&tz->device.kobj, pos->name); release_idr(&tz->idr, &tz->lock, pos->id); kfree(pos); return 0; } - EXPORT_SYMBOL(thermal_zone_unbind_cooling_device); static void thermal_release(struct device *dev) @@ -888,7 +867,8 @@ static void thermal_release(struct device *dev) struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; - if (!strncmp(dev_name(dev), "thermal_zone", sizeof "thermal_zone" - 1)) { + if (!strncmp(dev_name(dev), "thermal_zone", + sizeof("thermal_zone") - 1)) { tz = to_thermal_zone(dev); kfree(tz); } else { @@ -908,8 +888,9 @@ static struct class thermal_class = { * @devdata: device private data. * @ops: standard thermal cooling devices callbacks. */ -struct thermal_cooling_device *thermal_cooling_device_register( - char *type, void *devdata, const struct thermal_cooling_device_ops *ops) +struct thermal_cooling_device * +thermal_cooling_device_register(char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) { struct thermal_cooling_device *cdev; struct thermal_zone_device *pos; @@ -974,12 +955,11 @@ struct thermal_cooling_device *thermal_cooling_device_register( if (!result) return cdev; - unregister: +unregister: release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); device_unregister(&cdev->device); return ERR_PTR(result); } - EXPORT_SYMBOL(thermal_cooling_device_register); /** @@ -1024,7 +1004,6 @@ void thermal_cooling_device_unregister(struct device_unregister(&cdev->device); return; } - EXPORT_SYMBOL(thermal_cooling_device_unregister); /** @@ -1044,8 +1023,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) if (tz->ops->get_temp(tz, &temp)) { /* get_temp failed - retry it later */ - printk(KERN_WARNING PREFIX "failed to read out thermal zone " - "%d\n", tz->id); + pr_warn("failed to read out thermal zone %d\n", tz->id); goto leave; } @@ -1060,9 +1038,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) ret = tz->ops->notify(tz, count, trip_type); if (!ret) { - printk(KERN_EMERG - "Critical temperature reached (%ld C), shutting down.\n", - temp/1000); + pr_emerg("Critical temperature reached (%ld C), shutting down\n", + temp/1000); orderly_poweroff(true); } } @@ -1100,7 +1077,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) tz->last_temperature = temp; - leave: +leave: if (tz->passive) thermal_zone_device_set_polling(tz, tz->passive_delay); else if (tz->polling_delay) @@ -1199,7 +1176,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, } for (count = 0; count < trips; count++) { - TRIP_POINT_ATTR_ADD(&tz->device, count, result); + result = device_create_file(&tz->device, + &trip_point_attrs[count * 2]); + if (result) + break; + result = device_create_file(&tz->device, + &trip_point_attrs[count * 2 + 1]); if (result) goto unregister; tz->ops->get_trip_type(tz, count, &trip_type); @@ -1235,12 +1217,11 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, if (!result) return tz; - unregister: +unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); device_unregister(&tz->device); return ERR_PTR(result); } - EXPORT_SYMBOL(thermal_zone_device_register); /** @@ -1279,9 +1260,12 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); - for (count = 0; count < tz->trips; count++) - TRIP_POINT_ATTR_REMOVE(&tz->device, count); - + for (count = 0; count < tz->trips; count++) { + device_remove_file(&tz->device, + &trip_point_attrs[count * 2]); + device_remove_file(&tz->device, + &trip_point_attrs[count * 2 + 1]); + } thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); @@ -1289,7 +1273,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_unregister(&tz->device); return; } - EXPORT_SYMBOL(thermal_zone_device_unregister); #ifdef CONFIG_NET @@ -1312,10 +1295,11 @@ int thermal_generate_netlink_event(u32 orig, enum events event) void *msg_header; int size; int result; + static unsigned int thermal_event_seqnum; /* allocate memory */ - size = nla_total_size(sizeof(struct thermal_genl_event)) + \ - nla_total_size(0); + size = nla_total_size(sizeof(struct thermal_genl_event)) + + nla_total_size(0); skb = genlmsg_new(size, GFP_ATOMIC); if (!skb) @@ -1331,8 +1315,8 @@ int thermal_generate_netlink_event(u32 orig, enum events event) } /* fill the data */ - attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, \ - sizeof(struct thermal_genl_event)); + attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, + sizeof(struct thermal_genl_event)); if (!attr) { nlmsg_free(skb); @@ -1359,7 +1343,7 @@ int thermal_generate_netlink_event(u32 orig, enum events event) result = genlmsg_multicast(skb, 0, thermal_event_mcgrp.id, GFP_ATOMIC); if (result) - printk(KERN_INFO "failed to send netlink event:%d", result); + pr_info("failed to send netlink event:%d\n", result); return result; } diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index 794ecb40017c..e1235accab74 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -102,7 +102,7 @@ * You can find the original tools for this direct from Multitech * ftp://ftp.multitech.com/ISI-Cards/ * - * Having installed the cards the module options (/etc/modprobe.conf) + * Having installed the cards the module options (/etc/modprobe.d/) * * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 * diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 5b149b466ec8..5c27f7e6c9f1 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -1572,13 +1572,11 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id) do { struct uart_8250_port *up; struct uart_port *port; - bool skip; up = list_entry(l, struct uart_8250_port, list); port = &up->port; - skip = pass_counter && up->port.flags & UPF_IIR_ONCE; - if (!skip && port->handle_irq(port)) { + if (port->handle_irq(port)) { handled = 1; end = NULL; } else if (end == NULL) @@ -2037,10 +2035,12 @@ static int serial8250_startup(struct uart_port *port) spin_unlock_irqrestore(&port->lock, flags); /* - * If the interrupt is not reasserted, setup a timer to - * kick the UART on a regular basis. + * If the interrupt is not reasserted, or we otherwise + * don't trust the iir, setup a timer to kick the UART + * on a regular basis. */ - if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { + if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) || + up->port.flags & UPF_BUG_THRE) { up->bugs |= UART_BUG_THRE; pr_debug("ttyS%d - using backup timer\n", serial_index(port)); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index da2b0b0a183f..858dca865d6a 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1096,7 +1096,7 @@ static int kt_serial_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_port *port, int idx) { - port->flags |= UPF_IIR_ONCE; + port->flags |= UPF_BUG_THRE; return skip_tx_en_setup(priv, board, port, idx); } @@ -1118,18 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -static int try_enable_msi(struct pci_dev *dev) -{ - /* use msi if available, but fallback to legacy otherwise */ - pci_enable_msi(dev); - return 0; -} - -static void disable_msi(struct pci_dev *dev) -{ - pci_disable_msi(dev); -} - #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1249,9 +1237,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .init = try_enable_msi, .setup = kt_serial_setup, - .exit = disable_msi, }, /* * ITE diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 665beb68f670..070b442c1f81 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1041,7 +1041,7 @@ config SERIAL_OMAP config SERIAL_OMAP_CONSOLE bool "Console on OMAP serial port" - depends on SERIAL_OMAP + depends on SERIAL_OMAP=y select SERIAL_CORE_CONSOLE help Select this option if you would like to use omap serial port as diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index e7903751e058..1f0330915d5a 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -556,7 +556,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res_mem) port->mapbase = res_mem->start; - else if (platp->mapbase) + else if (platp) port->mapbase = platp->mapbase; else return -EINVAL; @@ -564,7 +564,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res_irq) port->irq = res_irq->start; - else if (platp->irq) + else if (platp) port->irq = platp->irq; /* Check platform data first so we can override device node data */ diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 0c65c9e66986..3d569cd68f58 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1946,10 +1946,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto unmap; } - /* Ensure interrupts from this UART are masked and cleared */ - writew(0, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); - uap->vendor = vendor; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; @@ -1967,6 +1963,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->port.line = i; pl011_dma_probe(uap); + /* Ensure interrupts from this UART are masked and cleared */ + writew(0, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); amba_ports[i] = uap; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index f9a6be7a9bed..3d7e1ee2fa57 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -389,6 +389,8 @@ static void atmel_start_rx(struct uart_port *port) { UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ + UART_PUT_CR(port, ATMEL_US_RXEN); + if (atmel_use_dma_rx(port)) { /* enable PDC controller */ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | @@ -404,6 +406,8 @@ static void atmel_start_rx(struct uart_port *port) */ static void atmel_stop_rx(struct uart_port *port) { + UART_PUT_CR(port, ATMEL_US_RXDIS); + if (atmel_use_dma_rx(port)) { /* disable PDC receive */ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index a9234ba8f8d5..c4b50af46c44 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -127,11 +127,6 @@ static inline void serial_out(struct uart_hsu_port *up, int offset, int value) #define HSU_REGS_BUFSIZE 1024 -static int hsu_show_regs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} static ssize_t port_show_regs(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -231,14 +226,14 @@ static ssize_t dma_show_regs(struct file *file, char __user *user_buf, static const struct file_operations port_regs_ops = { .owner = THIS_MODULE, - .open = hsu_show_regs_open, + .open = simple_open, .read = port_show_regs, .llseek = default_llseek, }; static const struct file_operations dma_regs_ops = { .owner = THIS_MODULE, - .open = hsu_show_regs_open, + .open = simple_open, .read = dma_show_regs, .llseek = default_llseek, }; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 0121486ac4fa..d00b38eb268e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1381,29 +1381,24 @@ static int serial_omap_probe(struct platform_device *pdev) return -ENODEV; } - if (!request_mem_region(mem->start, resource_size(mem), + if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem), pdev->dev.driver->name)) { dev_err(&pdev->dev, "memory region already claimed\n"); return -EBUSY; } dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!dma_rx) { - ret = -EINVAL; - goto err; - } + if (!dma_rx) + return -ENXIO; dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!dma_tx) { - ret = -EINVAL; - goto err; - } + if (!dma_tx) + return -ENXIO; + + up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; - up = kzalloc(sizeof(*up), GFP_KERNEL); - if (up == NULL) { - ret = -ENOMEM; - goto do_release_region; - } up->pdev = pdev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; @@ -1423,16 +1418,17 @@ static int serial_omap_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", up->port.line); ret = -ENODEV; - goto err; + goto err_port_line; } sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; - up->port.membase = ioremap(mem->start, resource_size(mem)); + up->port.membase = devm_ioremap(&pdev->dev, mem->start, + resource_size(mem)); if (!up->port.membase) { dev_err(&pdev->dev, "can't ioremap UART\n"); ret = -ENOMEM; - goto err; + goto err_ioremap; } up->port.flags = omap_up_info->flags; @@ -1478,16 +1474,19 @@ static int serial_omap_probe(struct platform_device *pdev) ret = uart_add_one_port(&serial_omap_reg, &up->port); if (ret != 0) - goto do_release_region; + goto err_add_port; pm_runtime_put(&pdev->dev); platform_set_drvdata(pdev, up); return 0; -err: + +err_add_port: + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); +err_ioremap: +err_port_line: dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", pdev->id, __func__, ret); -do_release_region: - release_mem_region(mem->start, resource_size(mem)); return ret; } @@ -1499,8 +1498,6 @@ static int serial_omap_remove(struct platform_device *dev) pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); pm_qos_remove_request(&up->pm_qos_request); - - kfree(up); } platform_set_drvdata(dev, NULL); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index e825460478be..bbbec4a74cfb 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -210,6 +210,7 @@ enum { #define CMITC_UARTCLK 192000000 /* 192.0000 MHz */ #define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */ #define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */ +#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */ struct pch_uart_buffer { unsigned char *buf; @@ -304,11 +305,7 @@ static const int trigger_level_1[4] = { 1, 1, 1, 1 }; #ifdef CONFIG_DEBUG_FS #define PCH_REGS_BUFSIZE 1024 -static int pch_show_regs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} + static ssize_t port_show_regs(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -362,7 +359,7 @@ static ssize_t port_show_regs(struct file *file, char __user *user_buf, static const struct file_operations port_regs_ops = { .owner = THIS_MODULE, - .open = pch_show_regs_open, + .open = simple_open, .read = port_show_regs, .llseek = default_llseek, }; @@ -388,6 +385,12 @@ static int pch_uart_get_uartclk(void) if (cmp && strstr(cmp, "Fish River Island II")) return FRI2_48_UARTCLK; + /* Kontron COMe-mTT10 (nanoETXexpress-TT) */ + cmp = dmi_get_system_info(DMI_BOARD_NAME); + if (cmp && (strstr(cmp, "COMe-mTT") || + strstr(cmp, "nanoETXexpress-TT"))) + return NTC1_UARTCLK; + return DEFAULT_UARTCLK; } @@ -1655,6 +1658,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, } pci_enable_msi(pdev); + pci_set_master(pdev); iobase = pci_resource_start(pdev, 0); mapbase = pci_resource_start(pdev, 1); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index de249d265bec..d8b0aee35632 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -982,6 +982,7 @@ static void s3c24xx_serial_resetport(struct uart_port *port, ucon &= ucon_mask; wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); /* reset both fifos */ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index bf461cf99616..3158e17b665c 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -355,9 +355,6 @@ static void sci_serial_out(struct uart_port *p, int offset, int value) WARN(1, "Invalid register access\n"); } -#define sci_in(up, offset) (up->serial_in(up, offset)) -#define sci_out(up, offset, value) (up->serial_out(up, offset, value)) - static int sci_probe_regmap(struct plat_sci_port *cfg) { switch (cfg->type) { @@ -422,9 +419,9 @@ static int sci_poll_get_char(struct uart_port *port) int c; do { - status = sci_in(port, SCxSR); + status = serial_port_in(port, SCxSR); if (status & SCxSR_ERRORS(port)) { - sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); + serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); continue; } break; @@ -433,11 +430,11 @@ static int sci_poll_get_char(struct uart_port *port) if (!(status & SCxSR_RDxF(port))) return NO_POLL_CHAR; - c = sci_in(port, SCxRDR); + c = serial_port_in(port, SCxRDR); /* Dummy read */ - sci_in(port, SCxSR); - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + serial_port_in(port, SCxSR); + serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); return c; } @@ -448,11 +445,11 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) unsigned short status; do { - status = sci_in(port, SCxSR); + status = serial_port_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); - sci_out(port, SCxTDR, c); - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); + serial_port_out(port, SCxTDR, c); + serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ @@ -480,10 +477,10 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag) ((!(cflag & CRTSCTS)))) { unsigned short status; - status = sci_in(port, SCSPTR); + status = serial_port_in(port, SCSPTR); status &= ~SCSPTR_CTSIO; status |= SCSPTR_RTSIO; - sci_out(port, SCSPTR, status); /* Set RTS = 1 */ + serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */ } } @@ -493,13 +490,13 @@ static int sci_txfill(struct uart_port *port) reg = sci_getreg(port, SCTFDR); if (reg->size) - return sci_in(port, SCTFDR) & 0xff; + return serial_port_in(port, SCTFDR) & 0xff; reg = sci_getreg(port, SCFDR); if (reg->size) - return sci_in(port, SCFDR) >> 8; + return serial_port_in(port, SCFDR) >> 8; - return !(sci_in(port, SCxSR) & SCI_TDRE); + return !(serial_port_in(port, SCxSR) & SCI_TDRE); } static int sci_txroom(struct uart_port *port) @@ -513,13 +510,13 @@ static int sci_rxfill(struct uart_port *port) reg = sci_getreg(port, SCRFDR); if (reg->size) - return sci_in(port, SCRFDR) & 0xff; + return serial_port_in(port, SCRFDR) & 0xff; reg = sci_getreg(port, SCFDR); if (reg->size) - return sci_in(port, SCFDR) & ((port->fifosize << 1) - 1); + return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1); - return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; + return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; } /* @@ -547,14 +544,14 @@ static void sci_transmit_chars(struct uart_port *port) unsigned short ctrl; int count; - status = sci_in(port, SCxSR); + status = serial_port_in(port, SCxSR); if (!(status & SCxSR_TDxE(port))) { - ctrl = sci_in(port, SCSCR); + ctrl = serial_port_in(port, SCSCR); if (uart_circ_empty(xmit)) ctrl &= ~SCSCR_TIE; else ctrl |= SCSCR_TIE; - sci_out(port, SCSCR, ctrl); + serial_port_out(port, SCSCR, ctrl); return; } @@ -573,27 +570,27 @@ static void sci_transmit_chars(struct uart_port *port) break; } - sci_out(port, SCxTDR, c); + serial_port_out(port, SCxTDR, c); port->icount.tx++; } while (--count > 0); - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); if (uart_circ_empty(xmit)) { sci_stop_tx(port); } else { - ctrl = sci_in(port, SCSCR); + ctrl = serial_port_in(port, SCSCR); if (port->type != PORT_SCI) { - sci_in(port, SCxSR); /* Dummy read */ - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + serial_port_in(port, SCxSR); /* Dummy read */ + serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } ctrl |= SCSCR_TIE; - sci_out(port, SCSCR, ctrl); + serial_port_out(port, SCSCR, ctrl); } } @@ -608,7 +605,7 @@ static void sci_receive_chars(struct uart_port *port) unsigned short status; unsigned char flag; - status = sci_in(port, SCxSR); + status = serial_port_in(port, SCxSR); if (!(status & SCxSR_RDxF(port))) return; @@ -621,7 +618,7 @@ static void sci_receive_chars(struct uart_port *port) break; if (port->type == PORT_SCI) { - char c = sci_in(port, SCxRDR); + char c = serial_port_in(port, SCxRDR); if (uart_handle_sysrq_char(port, c) || sci_port->break_flag) count = 0; @@ -629,9 +626,9 @@ static void sci_receive_chars(struct uart_port *port) tty_insert_flip_char(tty, c, TTY_NORMAL); } else { for (i = 0; i < count; i++) { - char c = sci_in(port, SCxRDR); + char c = serial_port_in(port, SCxRDR); - status = sci_in(port, SCxSR); + status = serial_port_in(port, SCxSR); #if defined(CONFIG_CPU_SH3) /* Skip "chars" during break */ if (sci_port->break_flag) { @@ -672,8 +669,8 @@ static void sci_receive_chars(struct uart_port *port) } } - sci_in(port, SCxSR); /* dummy read */ - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + serial_port_in(port, SCxSR); /* dummy read */ + serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); copied += count; port->icount.rx += count; @@ -683,8 +680,8 @@ static void sci_receive_chars(struct uart_port *port) /* Tell the rest of the system the news. New characters! */ tty_flip_buffer_push(tty); } else { - sci_in(port, SCxSR); /* dummy read */ - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + serial_port_in(port, SCxSR); /* dummy read */ + serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); } } @@ -726,7 +723,7 @@ static void sci_break_timer(unsigned long data) static int sci_handle_errors(struct uart_port *port) { int copied = 0; - unsigned short status = sci_in(port, SCxSR); + unsigned short status = serial_port_in(port, SCxSR); struct tty_struct *tty = port->state->port.tty; struct sci_port *s = to_sci_port(port); @@ -804,8 +801,8 @@ static int sci_handle_fifo_overrun(struct uart_port *port) if (!reg->size) return 0; - if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { - sci_out(port, SCLSR, 0); + if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { + serial_port_out(port, SCLSR, 0); port->icount.overrun++; @@ -822,7 +819,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port) static int sci_handle_breaks(struct uart_port *port) { int copied = 0; - unsigned short status = sci_in(port, SCxSR); + unsigned short status = serial_port_in(port, SCxSR); struct tty_struct *tty = port->state->port.tty; struct sci_port *s = to_sci_port(port); @@ -859,8 +856,8 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) struct sci_port *s = to_sci_port(port); if (s->chan_rx) { - u16 scr = sci_in(port, SCSCR); - u16 ssr = sci_in(port, SCxSR); + u16 scr = serial_port_in(port, SCSCR); + u16 ssr = serial_port_in(port, SCxSR); /* Disable future Rx interrupts */ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { @@ -869,9 +866,9 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) } else { scr &= ~SCSCR_RIE; } - sci_out(port, SCSCR, scr); + serial_port_out(port, SCSCR, scr); /* Clear current interrupt */ - sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); + serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", jiffies, s->rx_timeout); mod_timer(&s->rx_timer, jiffies + s->rx_timeout); @@ -909,15 +906,15 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr) if (port->type == PORT_SCI) { if (sci_handle_errors(port)) { /* discard character in rx buffer */ - sci_in(port, SCxSR); - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + serial_port_in(port, SCxSR); + serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); } } else { sci_handle_fifo_overrun(port); sci_rx_interrupt(irq, ptr); } - sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); + serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); /* Kick the transmission */ sci_tx_interrupt(irq, ptr); @@ -931,7 +928,7 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) /* Handle BREAKs */ sci_handle_breaks(port); - sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); + serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); return IRQ_HANDLED; } @@ -955,8 +952,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) struct sci_port *s = to_sci_port(port); irqreturn_t ret = IRQ_NONE; - ssr_status = sci_in(port, SCxSR); - scr_status = sci_in(port, SCSCR); + ssr_status = serial_port_in(port, SCxSR); + scr_status = serial_port_in(port, SCSCR); err_enabled = scr_status & port_rx_irq_mask(port); /* Tx Interrupt */ @@ -1170,7 +1167,7 @@ static void sci_free_gpios(struct sci_port *port) static unsigned int sci_tx_empty(struct uart_port *port) { - unsigned short status = sci_in(port, SCxSR); + unsigned short status = serial_port_in(port, SCxSR); unsigned short in_tx_fifo = sci_txfill(port); return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; @@ -1198,7 +1195,7 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) */ reg = sci_getreg(port, SCFCR); if (reg->size) - sci_out(port, SCFCR, sci_in(port, SCFCR) | 1); + serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1); } } @@ -1240,8 +1237,8 @@ static void sci_dma_tx_complete(void *arg) } else { s->cookie_tx = -EINVAL; if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl & ~SCSCR_TIE); + u16 ctrl = serial_port_in(port, SCSCR); + serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE); } } @@ -1494,13 +1491,13 @@ static void sci_start_tx(struct uart_port *port) #ifdef CONFIG_SERIAL_SH_SCI_DMA if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 new, scr = sci_in(port, SCSCR); + u16 new, scr = serial_port_in(port, SCSCR); if (s->chan_tx) new = scr | 0x8000; else new = scr & ~0x8000; if (new != scr) - sci_out(port, SCSCR, new); + serial_port_out(port, SCSCR, new); } if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && @@ -1512,8 +1509,8 @@ static void sci_start_tx(struct uart_port *port) if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl | SCSCR_TIE); + ctrl = serial_port_in(port, SCSCR); + serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); } } @@ -1522,40 +1519,40 @@ static void sci_stop_tx(struct uart_port *port) unsigned short ctrl; /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); + ctrl = serial_port_in(port, SCSCR); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) ctrl &= ~0x8000; ctrl &= ~SCSCR_TIE; - sci_out(port, SCSCR, ctrl); + serial_port_out(port, SCSCR, ctrl); } static void sci_start_rx(struct uart_port *port) { unsigned short ctrl; - ctrl = sci_in(port, SCSCR) | port_rx_irq_mask(port); + ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) ctrl &= ~0x4000; - sci_out(port, SCSCR, ctrl); + serial_port_out(port, SCSCR, ctrl); } static void sci_stop_rx(struct uart_port *port) { unsigned short ctrl; - ctrl = sci_in(port, SCSCR); + ctrl = serial_port_in(port, SCSCR); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) ctrl &= ~0x4000; ctrl &= ~port_rx_irq_mask(port); - sci_out(port, SCSCR, ctrl); + serial_port_out(port, SCSCR, ctrl); } static void sci_enable_ms(struct uart_port *port) @@ -1589,13 +1586,13 @@ static void rx_timer_fn(unsigned long arg) { struct sci_port *s = (struct sci_port *)arg; struct uart_port *port = &s->port; - u16 scr = sci_in(port, SCSCR); + u16 scr = serial_port_in(port, SCSCR); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { scr &= ~0x4000; enable_irq(s->cfg->irqs[1]); } - sci_out(port, SCSCR, scr | SCSCR_RIE); + serial_port_out(port, SCSCR, scr | SCSCR_RIE); dev_dbg(port->dev, "DMA Rx timed out\n"); schedule_work(&s->work_rx); } @@ -1776,14 +1773,14 @@ static void sci_reset(struct uart_port *port) unsigned int status; do { - status = sci_in(port, SCxSR); + status = serial_port_in(port, SCxSR); } while (!(status & SCxSR_TEND(port))); - sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ + serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ reg = sci_getreg(port, SCFCR); if (reg->size) - sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); + serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); } static void sci_set_termios(struct uart_port *port, struct ktermios *termios, @@ -1812,7 +1809,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_reset(port); - smr_val = sci_in(port, SCSMR) & 3; + smr_val = serial_port_in(port, SCSMR) & 3; if ((termios->c_cflag & CSIZE) == CS7) smr_val |= 0x40; @@ -1825,19 +1822,19 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); - sci_out(port, SCSMR, smr_val); + serial_port_out(port, SCSMR, smr_val); dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, s->cfg->scscr); if (t > 0) { if (t >= 256) { - sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); + serial_port_out(port, SCSMR, (serial_port_in(port, SCSMR) & ~3) | 1); t >>= 2; } else - sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3); + serial_port_out(port, SCSMR, serial_port_in(port, SCSMR) & ~3); - sci_out(port, SCBRR, t); + serial_port_out(port, SCBRR, t); udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ } @@ -1845,7 +1842,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, reg = sci_getreg(port, SCFCR); if (reg->size) { - unsigned short ctrl = sci_in(port, SCFCR); + unsigned short ctrl = serial_port_in(port, SCFCR); if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) { if (termios->c_cflag & CRTSCTS) @@ -1861,10 +1858,10 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, */ ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST); - sci_out(port, SCFCR, ctrl); + serial_port_out(port, SCFCR, ctrl); } - sci_out(port, SCSCR, s->cfg->scscr); + serial_port_out(port, SCSCR, s->cfg->scscr); #ifdef CONFIG_SERIAL_SH_SCI_DMA /* @@ -2166,7 +2163,7 @@ static void serial_console_write(struct console *co, const char *s, /* wait until fifo is empty and last bit has been transmitted */ bits = SCxSR_TDxE(port) | SCxSR_TEND(port); - while ((sci_in(port, SCxSR) & bits) != bits) + while ((serial_port_in(port, SCxSR) & bits) != bits) cpu_relax(); sci_port_disable(sci_port); @@ -2260,12 +2257,12 @@ static int sci_runtime_suspend(struct device *dev) if (uart_console(port)) { struct plat_sci_reg *reg; - sci_port->saved_smr = sci_in(port, SCSMR); - sci_port->saved_brr = sci_in(port, SCBRR); + sci_port->saved_smr = serial_port_in(port, SCSMR); + sci_port->saved_brr = serial_port_in(port, SCBRR); reg = sci_getreg(port, SCFCR); if (reg->size) - sci_port->saved_fcr = sci_in(port, SCFCR); + sci_port->saved_fcr = serial_port_in(port, SCFCR); else sci_port->saved_fcr = 0; } @@ -2279,13 +2276,13 @@ static int sci_runtime_resume(struct device *dev) if (uart_console(port)) { sci_reset(port); - sci_out(port, SCSMR, sci_port->saved_smr); - sci_out(port, SCBRR, sci_port->saved_brr); + serial_port_out(port, SCSMR, sci_port->saved_smr); + serial_port_out(port, SCBRR, sci_port->saved_brr); if (sci_port->saved_fcr) - sci_out(port, SCFCR, sci_port->saved_fcr); + serial_port_out(port, SCFCR, sci_port->saved_fcr); - sci_out(port, SCSCR, sci_port->cfg->scscr); + serial_port_out(port, SCSCR, sci_port->cfg->scscr); } return 0; } diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index a1a2d364f92b..4c22a1529aac 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -20,10 +20,10 @@ defined(CONFIG_ARCH_SH7372) || \ defined(CONFIG_ARCH_R8A7740) -# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) -# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) -# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) -# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) +# define SCxSR_RDxF_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfffc) +# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73) +# define SCxSR_TDxE_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffdf) +# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3) #else # define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index b3b70b0bf85b..babd9470982b 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -1581,7 +1581,7 @@ static int __init sunzilog_init(void) if (err) goto out_unregister_uart; - if (!zilog_irq) { + if (zilog_irq) { struct uart_sunzilog_port *up = sunzilog_irq_chain; err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, "zs", sunzilog_irq_chain); @@ -1622,7 +1622,7 @@ static void __exit sunzilog_exit(void) { platform_driver_unregister(&zs_driver); - if (!zilog_irq) { + if (zilog_irq) { struct uart_sunzilog_port *up = sunzilog_irq_chain; /* Disable Interrupts */ diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 136e86faa1e1..05728894a88c 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -327,7 +327,7 @@ static void send_sig_all(int sig) if (is_global_init(p)) continue; - force_sig(sig, p); + do_send_sig_info(sig, SEND_SIG_FORCED, p, true); } read_unlock(&tasklist_lock); } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 3bdd4b19dd06..2156188db4a6 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2932,11 +2932,10 @@ static int __init con_init(void) gotoxy(vc, vc->vc_x, vc->vc_y); csi_J(vc, 0); update_screen(vc); - pr_info("Console: %s %s %dx%d", + pr_info("Console: %s %s %dx%d\n", vc->vc_can_do_color ? "colour" : "mono", display_desc, vc->vc_cols, vc->vc_rows); printable = 1; - printk("\n"); console_unlock(); diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index cbd8f5f80596..76316a33061b 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -2,14 +2,6 @@ # USB device configuration # -menuconfig USB_SUPPORT - bool "USB support" - depends on HAS_IOMEM - default y - ---help--- - This option adds core support for Universal Serial Bus (USB). - You will also need drivers from the following menu to make use of it. - # many non-PCI SOC chips embed OHCI config USB_ARCH_HAS_OHCI boolean @@ -63,6 +55,14 @@ config USB_ARCH_HAS_XHCI boolean default PCI +menuconfig USB_SUPPORT + bool "USB support" + depends on HAS_IOMEM + default y + ---help--- + This option adds core support for Universal Serial Bus (USB). + You will also need drivers from the following menu to make use of it. + if USB_SUPPORT config USB_COMMON diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f8e2d6d52e5c..9a56635dc19c 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) if (status == 0) { status = usb_suspend_device(udev, msg); - /* Again, ignore errors during system sleep transitions */ - if (!PMSG_IS_AUTO(msg)) + /* + * Ignore errors from non-root-hub devices during + * system sleep transitions. For the most part, + * these devices should go to low power anyway when + * the entire bus is suspended. + */ + if (udev->parent && !PMSG_IS_AUTO(msg)) status = 0; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 9d7fc9a39933..140d3e11f212 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) if (status == 0) { usb_set_device_state(rhdev, USB_STATE_SUSPENDED); hcd->state = HC_STATE_SUSPENDED; + + /* Did we race with a root-hub wakeup event? */ + if (rhdev->do_remote_wakeup) { + char buffer[6]; + + status = hcd->driver->hub_status_data(hcd, buffer); + if (status != 0) { + dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n"); + hcd_bus_resume(rhdev, PMSG_AUTO_RESUME); + status = -EBUSY; + } + } } else { spin_lock_irq(&hcd_root_hub_lock); if (!HCD_DEAD(hcd)) { diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 28664eb7f555..a2aa9d652c67 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3163,6 +3163,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; + /* + * Some superspeed devices have finished the link training process + * and attached to a superspeed hub port, but the device descriptor + * got from those devices show they aren't superspeed devices. Warm + * reset the port attached by the devices can fix them. + */ + if ((udev->speed == USB_SPEED_SUPER) && + (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) { + dev_err(&udev->dev, "got a wrong device descriptor, " + "warm reset device\n"); + hub_port_reset(hub, port1, udev, + HUB_BH_RESET_TIME, true); + retval = -EINVAL; + goto fail; + } + if (udev->descriptor.bMaxPacketSize0 == 0xff || udev->speed == USB_SPEED_SUPER) i = 512; diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index cefa0c8b5b6a..d2b9af59cba9 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -428,18 +428,10 @@ static loff_t default_file_lseek (struct file *file, loff_t offset, int orig) return retval; } -static int default_open (struct inode *inode, struct file *file) -{ - if (inode->i_private) - file->private_data = inode->i_private; - - return 0; -} - static const struct file_operations default_file_operations = { .read = default_read_file, .write = default_write_file, - .open = default_open, + .open = simple_open, .llseek = default_file_lseek, }; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index b3bdfede45e6..aed3e07942d4 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb) retval = usb_unlink_urb(io->urbs [i]); if (retval != -EINPROGRESS && retval != -ENODEV && - retval != -EBUSY) + retval != -EBUSY && + retval != -EIDRM) dev_err(&io->dev->dev, "%s, unlink --> %d\n", __func__, retval); @@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb) } spin_lock(&io->lock); } - urb->dev = NULL; /* on the last completion, signal usb_sg_wait() */ io->bytes += urb->actual_length; @@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io) case -ENXIO: /* hc didn't queue this one */ case -EAGAIN: case -ENOMEM: - io->urbs[i]->dev = NULL; retval = 0; yield(); break; @@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io) /* fail any uncompleted urbs */ default: - io->urbs[i]->dev = NULL; io->urbs[i]->status = retval; dev_dbg(&io->dev->dev, "%s, submit --> %d\n", __func__, retval); @@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io) if (!io->urbs [i]->dev) continue; retval = usb_unlink_urb(io->urbs [i]); - if (retval != -EINPROGRESS && retval != -EBUSY) + if (retval != -EINPROGRESS + && retval != -ENODEV + && retval != -EBUSY + && retval != -EIDRM) dev_warn(&io->dev->dev, "%s, unlink --> %d\n", __func__, retval); } diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7239a73c1b8c..cd9b3a2cd8a7 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb); * never submitted, or it was unlinked before, or the hardware is already * finished with it), even if the completion handler has not yet run. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * Unlinking and Endpoint Queues: * * [The behaviors and guarantees described below do not apply to virtual @@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb); * with error -EPERM. Thus even if the URB's completion handler always * tries to resubmit, it will not succeed and the URB will become idle. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). @@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb); * with error -EPERM. Thus even if the URB's completion handler always * tries to resubmit, it will not succeed and the URB will become idle. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 85a5cebe96b3..965a6293206a 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -345,7 +345,7 @@ static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req) } skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, - skb->len <= 1, req->actual, req->actual); + skb->len <= 1, req->actual, PAGE_SIZE); page = NULL; if (req->actual < req->length) { /* Last fragment */ diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 8793f32bab11..e58b16442971 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1574,7 +1574,6 @@ static void destroy_ep_files (struct dev_data *dev) DBG (dev, "%s %d\n", __func__, dev->state); /* dev->state must prevent interference */ -restart: spin_lock_irq (&dev->lock); while (!list_empty(&dev->epfiles)) { struct ep_data *ep; diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 19f318ababa2..cf14c95a6700 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -13,6 +13,7 @@ #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <linux/of_platform.h> /* interface and function clocks */ diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index fd9109d7eb0e..680e1a31fb87 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -352,7 +352,6 @@ static int debug_async_open(struct inode *, struct file *); static int debug_periodic_open(struct inode *, struct file *); static int debug_registers_open(struct inode *, struct file *); static int debug_async_open(struct inode *, struct file *); -static int debug_lpm_open(struct inode *, struct file *); static ssize_t debug_lpm_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos); static ssize_t debug_lpm_write(struct file *file, const char __user *buffer, @@ -385,7 +384,7 @@ static const struct file_operations debug_registers_fops = { }; static const struct file_operations debug_lpm_fops = { .owner = THIS_MODULE, - .open = debug_lpm_open, + .open = simple_open, .read = debug_lpm_read, .write = debug_lpm_write, .release = debug_lpm_close, @@ -970,12 +969,6 @@ static int debug_registers_open(struct inode *inode, struct file *file) return file->private_data ? 0 : -ENOMEM; } -static int debug_lpm_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - static int debug_lpm_close(struct inode *inode, struct file *file) { return 0; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 057cdda7a489..806cc95317aa 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -347,6 +347,8 @@ static int ehci_reset (struct ehci_hcd *ehci) if (ehci->debug) dbgp_external_startup(); + ehci->port_c_suspend = ehci->suspended_ports = + ehci->resuming_ports = 0; return retval; } @@ -939,6 +941,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) * like usb_port_resume() does. */ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); + set_bit(i, &ehci->resuming_ports); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 256fbd42e48c..38fe07623152 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -223,15 +223,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) * remote wakeup, we must fail the suspend. */ if (hcd->self.root_hub->do_remote_wakeup) { - port = HCS_N_PORTS(ehci->hcs_params); - while (port--) { - if (ehci->reset_done[port] != 0) { - spin_unlock_irq(&ehci->lock); - ehci_dbg(ehci, "suspend failed because " - "port %d is resuming\n", - port + 1); - return -EBUSY; - } + if (ehci->resuming_ports) { + spin_unlock_irq(&ehci->lock); + ehci_dbg(ehci, "suspend failed because a port is resuming\n"); + return -EBUSY; } } @@ -554,16 +549,12 @@ static int ehci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 temp, status = 0; + u32 temp, status; u32 mask; int ports, i, retval = 1; unsigned long flags; u32 ppcd = 0; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ - if (ehci->rh_state != EHCI_RH_RUNNING) - return 0; - /* init status to no-changes */ buf [0] = 0; ports = HCS_N_PORTS (ehci->hcs_params); @@ -572,6 +563,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) retval++; } + /* Inform the core about resumes-in-progress by returning + * a non-zero value even if there are no status changes. + */ + status = ehci->resuming_ports; + /* Some boards (mostly VIA?) report bogus overcurrent indications, * causing massive log spam unless we completely ignore them. It * may be relevant that VIA VT8235 controllers, where PORT_POWER is @@ -846,6 +842,7 @@ static int ehci_hub_control ( ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESUME), status_reg); + clear_bit(wIndex, &ehci->resuming_ports); retval = handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); if (retval != 0) { @@ -864,6 +861,7 @@ static int ehci_hub_control ( ehci->reset_done[wIndex])) { status |= USB_PORT_STAT_C_RESET << 16; ehci->reset_done [wIndex] = 0; + clear_bit(wIndex, &ehci->resuming_ports); /* force reset to complete */ ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET), @@ -884,8 +882,10 @@ static int ehci_hub_control ( ehci_readl(ehci, status_reg)); } - if (!(temp & (PORT_RESUME|PORT_RESET))) + if (!(temp & (PORT_RESUME|PORT_RESET))) { ehci->reset_done[wIndex] = 0; + clear_bit(wIndex, &ehci->resuming_ports); + } /* transfer dedicated ports to the companion hc */ if ((temp & PORT_CONNECT) && @@ -920,6 +920,7 @@ static int ehci_hub_control ( status |= USB_PORT_STAT_SUSPEND; } else if (test_bit(wIndex, &ehci->suspended_ports)) { clear_bit(wIndex, &ehci->suspended_ports); + clear_bit(wIndex, &ehci->resuming_ports); ehci->reset_done[wIndex] = 0; if (temp & PORT_PE) set_bit(wIndex, &ehci->port_c_suspend); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 3de48a2d7955..73544bd440bd 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -224,6 +224,7 @@ static int tegra_ehci_hub_control( temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); /* start resume signalling */ ehci_writel(ehci, temp | PORT_RESUME, status_reg); + set_bit(wIndex-1, &ehci->resuming_ports); spin_unlock_irqrestore(&ehci->lock, flags); msleep(20); @@ -236,6 +237,7 @@ static int tegra_ehci_hub_control( pr_err("%s: timeout waiting for SUSPEND\n", __func__); ehci->reset_done[wIndex-1] = 0; + clear_bit(wIndex-1, &ehci->resuming_ports); tegra->port_resuming = 1; goto done; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 8f9acbc96fde..2694ed6558d2 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -117,6 +117,8 @@ struct ehci_hcd { /* one per controller */ the change-suspend feature turned on */ unsigned long suspended_ports; /* which ports are suspended */ + unsigned long resuming_ports; /* which ports have + started to resume */ /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index db8963f5fbce..09f597ad6e00 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -27,6 +27,10 @@ #error "CONFIG_ARCH_AT91 must be defined." #endif +#define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS) +#define at91_for_each_port(index) \ + for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++) + /* interface and function clocks; sometimes also an AHB clock */ static struct clk *iclk, *fclk, *hclk; static int clocked; @@ -240,26 +244,26 @@ ohci_at91_start (struct usb_hcd *hcd) static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable) { - if (port < 0 || port >= 2) + if (!valid_port(port)) return; if (!gpio_is_valid(pdata->vbus_pin[port])) return; gpio_set_value(pdata->vbus_pin[port], - !pdata->vbus_pin_active_low[port] ^ enable); + pdata->vbus_pin_active_low[port] ^ enable); } static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) { - if (port < 0 || port >= 2) + if (!valid_port(port)) return -EINVAL; if (!gpio_is_valid(pdata->vbus_pin[port])) return -EINVAL; return gpio_get_value(pdata->vbus_pin[port]) ^ - !pdata->vbus_pin_active_low[port]; + pdata->vbus_pin_active_low[port]; } /* @@ -271,9 +275,9 @@ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf) int length = ohci_hub_status_data(hcd, buf); int port; - for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) { + at91_for_each_port(port) { if (pdata->overcurrent_changed[port]) { - if (! length) + if (!length) length = 1; buf[0] |= 1 << (port + 1); } @@ -297,11 +301,17 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", hcd, typeReq, wValue, wIndex, buf, wLength); + wIndex--; + switch (typeReq) { case SetPortFeature: if (wValue == USB_PORT_FEAT_POWER) { dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); - ohci_at91_usb_set_power(pdata, wIndex - 1, 1); + if (valid_port(wIndex)) { + ohci_at91_usb_set_power(pdata, wIndex, 1); + ret = 0; + } + goto out; } break; @@ -312,9 +322,9 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: C_OVER_CURRENT\n"); - if (wIndex == 1 || wIndex == 2) { - pdata->overcurrent_changed[wIndex-1] = 0; - pdata->overcurrent_status[wIndex-1] = 0; + if (valid_port(wIndex)) { + pdata->overcurrent_changed[wIndex] = 0; + pdata->overcurrent_status[wIndex] = 0; } goto out; @@ -323,9 +333,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: OVER_CURRENT\n"); - if (wIndex == 1 || wIndex == 2) { - pdata->overcurrent_status[wIndex-1] = 0; - } + if (valid_port(wIndex)) + pdata->overcurrent_status[wIndex] = 0; goto out; @@ -333,15 +342,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: POWER\n"); - if (wIndex == 1 || wIndex == 2) { - ohci_at91_usb_set_power(pdata, wIndex - 1, 0); + if (valid_port(wIndex)) { + ohci_at91_usb_set_power(pdata, wIndex, 0); return 0; } } break; } - ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength); if (ret) goto out; @@ -377,18 +386,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); - if (wIndex == 1 || wIndex == 2) { - if (! ohci_at91_usb_get_power(pdata, wIndex-1)) { + if (valid_port(wIndex)) { + if (!ohci_at91_usb_get_power(pdata, wIndex)) *data &= ~cpu_to_le32(RH_PS_PPS); - } - if (pdata->overcurrent_changed[wIndex-1]) { + if (pdata->overcurrent_changed[wIndex]) *data |= cpu_to_le32(RH_PS_OCIC); - } - if (pdata->overcurrent_status[wIndex-1]) { + if (pdata->overcurrent_status[wIndex]) *data |= cpu_to_le32(RH_PS_POCI); - } } } @@ -450,14 +456,14 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ - for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) { + at91_for_each_port(port) { if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { gpio = pdata->overcurrent_pin[port]; break; } } - if (port == ARRAY_SIZE(pdata->overcurrent_pin)) { + if (port == AT91_MAX_USBH_PORTS) { dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n"); return IRQ_HANDLED; } @@ -467,7 +473,7 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* When notified of an over-current situation, disable power on the corresponding port, and mark this port in over-current. */ - if (! val) { + if (!val) { ohci_at91_usb_set_power(pdata, port, 0); pdata->overcurrent_status[port] = 1; pdata->overcurrent_changed[port] = 1; @@ -492,7 +498,7 @@ static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); static int __devinit ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - int i, ret, gpio; + int i, gpio; enum of_gpio_flags flags; struct at91_usbh_data *pdata; u32 ports; @@ -514,48 +520,17 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) if (!of_property_read_u32(np, "num-ports", &ports)) pdata->ports = ports; - for (i = 0; i < 2; i++) { + at91_for_each_port(i) { gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags); pdata->vbus_pin[i] = gpio; if (!gpio_is_valid(gpio)) continue; pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW; - ret = gpio_request(gpio, "ohci_vbus"); - if (ret) { - dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio); - continue; - } - ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1); - if (ret) - dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d", - !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio); } - for (i = 0; i < 2; i++) { - gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); - pdata->overcurrent_pin[i] = gpio; - if (!gpio_is_valid(gpio)) - continue; - ret = gpio_request(gpio, "ohci_overcurrent"); - if (ret) { - dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio); - continue; - } - - ret = gpio_direction_input(gpio); - if (ret) { - dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio); - continue; - } - - ret = request_irq(gpio_to_irq(gpio), - ohci_hcd_at91_overcurrent_irq, - IRQF_SHARED, "ohci_overcurrent", pdev); - if (ret) { - gpio_free(gpio); - dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); - } - } + at91_for_each_port(i) + pdata->overcurrent_pin[i] = + of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); pdev->dev.platform_data = pdata; @@ -574,35 +549,69 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { struct at91_usbh_data *pdata; int i; + int gpio; + int ret; - i = ohci_at91_of_init(pdev); - - if (i) - return i; + ret = ohci_at91_of_init(pdev); + if (ret) + return ret; pdata = pdev->dev.platform_data; if (pdata) { - for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->vbus_pin[i])) continue; - gpio_request(pdata->vbus_pin[i], "ohci_vbus"); + gpio = pdata->vbus_pin[i]; + + ret = gpio_request(gpio, "ohci_vbus"); + if (ret) { + dev_err(&pdev->dev, + "can't request vbus gpio %d\n", gpio); + continue; + } + ret = gpio_direction_output(gpio, + !pdata->vbus_pin_active_low[i]); + if (ret) { + dev_err(&pdev->dev, + "can't put vbus gpio %d as output %d\n", + gpio, !pdata->vbus_pin_active_low[i]); + gpio_free(gpio); + continue; + } + ohci_at91_usb_set_power(pdata, i, 1); } - for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { - int ret; - + at91_for_each_port(i) { if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; - gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent"); + gpio = pdata->overcurrent_pin[i]; + + ret = gpio_request(gpio, "ohci_overcurrent"); + if (ret) { + dev_err(&pdev->dev, + "can't request overcurrent gpio %d\n", + gpio); + continue; + } + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, + "can't configure overcurrent gpio %d as input\n", + gpio); + gpio_free(gpio); + continue; + } - ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]), + ret = request_irq(gpio_to_irq(gpio), ohci_hcd_at91_overcurrent_irq, IRQF_SHARED, "ohci_overcurrent", pdev); if (ret) { - gpio_free(pdata->overcurrent_pin[i]); - dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); + gpio_free(gpio); + dev_err(&pdev->dev, + "can't get gpio IRQ for overcurrent\n"); } } } @@ -617,14 +626,14 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) int i; if (pdata) { - for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->vbus_pin[i])) continue; ohci_at91_usb_set_power(pdata, i, 0); gpio_free(pdata->vbus_pin[i]); } - for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 11de5f1be981..32dada8c8b4f 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -825,9 +825,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) } } - /* Disable any BIOS SMIs */ - writel(XHCI_LEGACY_DISABLE_SMI, - base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + /* Mask off (turn off) any enabled SMIs */ + val &= XHCI_LEGACY_DISABLE_SMI; + /* Mask all SMI events bits, RW1C */ + val |= XHCI_LEGACY_SMI_EVENTS; + /* Disable any BIOS SMIs and clear all SMI events*/ + writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 045cde4cbc3d..768d54295a20 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -196,11 +196,12 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) status = get_hub_status_data(uhci, buf); switch (uhci->rh_state) { - case UHCI_RH_SUSPENDING: case UHCI_RH_SUSPENDED: /* if port change, ask to be resumed */ - if (status || uhci->resuming_ports) + if (status || uhci->resuming_ports) { + status = 1; usb_hcd_resume_root_hub(hcd); + } break; case UHCI_RH_AUTO_STOPPED: diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index e9b0f043455d..4b436f5a4171 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -119,7 +119,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci) xhci_dbg(xhci, " Event Interrupts %s\n", (temp & CMD_EIE) ? "enabled " : "disabled"); xhci_dbg(xhci, " Host System Error Interrupts %s\n", - (temp & CMD_EIE) ? "enabled " : "disabled"); + (temp & CMD_HSEIE) ? "enabled " : "disabled"); xhci_dbg(xhci, " HC has %sfinished light reset\n", (temp & CMD_LRESET) ? "not " : ""); } diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index c7f33123d4c0..377f4242dabb 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -62,8 +62,9 @@ /* USB Legacy Support Control and Status Register - section 7.1.2 */ /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ #define XHCI_LEGACY_CONTROL_OFFSET (0x04) -/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ -#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17)) +/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ +#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17)) +#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29) /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ #define XHCI_L1C (1 << 16) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index cae4c6f2845a..68eaa908ac8e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1796,11 +1796,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int i; /* Free the Event Ring Segment Table and the actual Event Ring */ - if (xhci->ir_set) { - xhci_writel(xhci, 0, &xhci->ir_set->erst_size); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); - } size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) dma_free_coherent(&pdev->dev, size, @@ -1812,7 +1807,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->event_ring = NULL; xhci_dbg(xhci, "Freed event ring\n"); - xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring); if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; @@ -1841,7 +1835,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->medium_streams_pool = NULL; xhci_dbg(xhci, "Freed medium stream array pool\n"); - xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr); if (xhci->dcbaa) dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa), xhci->dcbaa, xhci->dcbaa->dma); @@ -2459,6 +2452,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) fail: xhci_warn(xhci, "Couldn't initialize memory\n"); + xhci_halt(xhci); + xhci_reset(xhci); xhci_mem_cleanup(xhci); return -ENOMEM; } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef98b38626fb..7a856a767e77 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -95,6 +95,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); } + if (pdev->vendor == PCI_VENDOR_ID_VIA) + xhci->quirks |= XHCI_RESET_ON_RESUME; } /* called during probe() after chip reset completes */ @@ -326,7 +328,7 @@ int __init xhci_register_pci(void) return pci_register_driver(&xhci_pci_driver); } -void __exit xhci_unregister_pci(void) +void xhci_unregister_pci(void) { pci_unregister_driver(&xhci_pci_driver); } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6bd9d53062eb..3d9422f16a20 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2417,7 +2417,7 @@ hw_died: u32 irq_pending; /* Acknowledge the PCI interrupt */ irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); - irq_pending |= 0x3; + irq_pending |= IMAN_IP; xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending); } @@ -2734,7 +2734,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, urb->dev->speed == USB_SPEED_FULL) urb->interval /= 8; } - return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index); } /* @@ -3514,7 +3514,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, } ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free; - return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index); } /**** Command Ring Operations ****/ diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index e1963d4a430f..36641a7f2371 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -106,6 +106,9 @@ int xhci_halt(struct xhci_hcd *xhci) STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); if (!ret) xhci->xhc_state |= XHCI_STATE_HALTED; + else + xhci_warn(xhci, "Host not halted after %u microseconds.\n", + XHCI_MAX_HALT_USEC); return ret; } @@ -664,11 +667,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci) xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification); xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg); - xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); - xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size); xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); + xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); } static void xhci_restore_registers(struct xhci_hcd *xhci) @@ -677,10 +680,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification); xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg); - xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); - xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size); xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); + xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); + xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); + xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); } static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 91074fdab3eb..3d69c4b2b542 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -205,6 +205,10 @@ struct xhci_op_regs { #define CMD_PM_INDEX (1 << 11) /* bits 12:31 are reserved (and should be preserved on writes). */ +/* IMAN - Interrupt Management Register */ +#define IMAN_IP (1 << 1) +#define IMAN_IE (1 << 0) + /* USBSTS - USB status - status bitmasks */ /* HC not running - set to 1 when run/stop bit is cleared. */ #define STS_HALT XHCI_STS_HALT diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 7f547dc3a590..ed8adb052ca7 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -60,8 +60,6 @@ static int usb_serial_device_probe(struct device *dev) retval = -ENODEV; goto exit; } - if (port->dev_state != PORT_REGISTERING) - goto exit; driver = port->serial->type; if (driver->port_probe) { @@ -98,9 +96,6 @@ static int usb_serial_device_remove(struct device *dev) if (!port) return -ENODEV; - if (port->dev_state != PORT_UNREGISTERING) - return retval; - device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7c229d304684..02e7f2d32d52 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -75,7 +75,8 @@ struct ftdi_private { unsigned long last_dtr_rts; /* saved modem control outputs */ struct async_icount icount; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ - char prev_status, diff_status; /* Used for TIOCMIWAIT */ + char prev_status; /* Used for TIOCMIWAIT */ + bool dev_gone; /* Used to abort TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ struct usb_serial_port *port; __u16 interface; /* FT2232C, FT2232H or FT4232H port interface @@ -1681,6 +1682,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) init_waitqueue_head(&priv->delta_msr_wait); priv->flags = ASYNC_LOW_LATENCY; + priv->dev_gone = false; if (quirk && quirk->port_probe) quirk->port_probe(priv); @@ -1724,7 +1726,8 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) /* * Module parameter to control latency timer for NDI FTDI-based USB devices. - * If this value is not set in modprobe.conf.local its value will be set to 1ms. + * If this value is not set in /etc/modprobe.d/ its value will be set + * to 1ms. */ static int ndi_latency_timer = 1; @@ -1838,6 +1841,9 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) dbg("%s", __func__); + priv->dev_gone = true; + wake_up_interruptible_all(&priv->delta_msr_wait); + remove_sysfs_attrs(port); kref_put(&priv->kref, ftdi_sio_priv_release); @@ -1981,17 +1987,19 @@ static int ftdi_process_packet(struct tty_struct *tty, N.B. packet may be processed more than once, but differences are only processed once. */ status = packet[0] & FTDI_STATUS_B0_MASK; - if (status & FTDI_RS0_CTS) - priv->icount.cts++; - if (status & FTDI_RS0_DSR) - priv->icount.dsr++; - if (status & FTDI_RS0_RI) - priv->icount.rng++; - if (status & FTDI_RS0_RLSD) - priv->icount.dcd++; if (status != priv->prev_status) { - priv->diff_status |= status ^ priv->prev_status; - wake_up_interruptible(&priv->delta_msr_wait); + char diff_status = status ^ priv->prev_status; + + if (diff_status & FTDI_RS0_CTS) + priv->icount.cts++; + if (diff_status & FTDI_RS0_DSR) + priv->icount.dsr++; + if (diff_status & FTDI_RS0_RI) + priv->icount.rng++; + if (diff_status & FTDI_RS0_RLSD) + priv->icount.dcd++; + + wake_up_interruptible_all(&priv->delta_msr_wait); priv->prev_status = status; } @@ -2394,15 +2402,12 @@ static int ftdi_ioctl(struct tty_struct *tty, */ case TIOCMIWAIT: cprev = priv->icount; - while (1) { + while (!priv->dev_gone) { interruptible_sleep_on(&priv->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; cnow = priv->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || @@ -2411,7 +2416,7 @@ static int ftdi_ioctl(struct tty_struct *tty, } cprev = cnow; } - /* not reached */ + return -EIO; break; case TIOCSERGETLSR: return get_lsr_info(port, (struct serial_struct __user *)arg); diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 6e1622f2a297..08d16e8c002d 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -27,8 +27,8 @@ /* Product information. */ #define FOCUS_VENDOR_ID 0x0C2E -#define FOCUS_PRODUCT_ID 0x0720 -#define FOCUS_PRODUCT_ID_UNI 0x0710 +#define FOCUS_PRODUCT_ID_BI 0x0720 +#define FOCUS_PRODUCT_ID_UNI 0x0700 #define METROUSB_SET_REQUEST_TYPE 0x40 #define METROUSB_SET_MODEM_CTRL_REQUEST 10 @@ -47,7 +47,7 @@ struct metrousb_private { /* Device table list. */ static struct usb_device_id id_table[] = { - { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) }, + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) }, { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, { }, /* Terminating entry. */ }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 836cfa9a515f..f4465ccddc35 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -708,6 +708,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) }, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ff4a174fa5de..a1a9062954c4 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -420,7 +420,7 @@ static void pl2303_set_termios(struct tty_struct *tty, control = priv->line_control; if ((cflag & CBAUD) == B0) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - else + else if ((old_termios->c_cflag & CBAUD) == B0) priv->line_control |= (CONTROL_DTR | CONTROL_RTS); if (control != priv->line_control) { control = priv->line_control; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index f14465a83dd1..fdd5aa2c8d82 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */ { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */ { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */ + { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */ /* Sierra Wireless C885 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)}, /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 69230f01056a..97355a15bbea 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface, serial->attached = 1; } + /* Avoid race with tty_open and serial_install by setting the + * disconnected flag and not clearing it until all ports have been + * registered. + */ + serial->disconnected = 1; + if (get_free_serial(serial, num_ports, &minor) == NULL) { dev_err(&interface->dev, "No more free serial devices\n"); goto probe_error; @@ -1070,19 +1076,16 @@ int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; dev_set_name(&port->dev, "ttyUSB%d", port->number); dbg ("%s - registering %s", __func__, dev_name(&port->dev)); - port->dev_state = PORT_REGISTERING; device_enable_async_suspend(&port->dev); retval = device_add(&port->dev); - if (retval) { + if (retval) dev_err(&port->dev, "Error registering port device, " "continuing\n"); - port->dev_state = PORT_UNREGISTERED; - } else { - port->dev_state = PORT_REGISTERED; - } } + serial->disconnected = 0; + usb_serial_console_init(debug, minor); exit: @@ -1124,22 +1127,8 @@ void usb_serial_disconnect(struct usb_interface *interface) } kill_traffic(port); cancel_work_sync(&port->work); - if (port->dev_state == PORT_REGISTERED) { - - /* Make sure the port is bound so that the - * driver's port_remove method is called. - */ - if (!port->dev.driver) { - int rc; - - port->dev.driver = - &serial->type->driver; - rc = device_bind_driver(&port->dev); - } - port->dev_state = PORT_UNREGISTERING; + if (device_is_registered(&port->dev)) device_del(&port->dev); - port->dev_state = PORT_UNREGISTERED; - } } } serial->type->disconnect(serial); diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index fe2d803a6347..7691c866637b 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -222,7 +222,7 @@ config USB_LIBUSUAL for usb-storage and ub drivers, and allows to switch binding of these devices without rebuilding modules. - Typical syntax of /etc/modprobe.conf is: + Typical syntax of /etc/modprobe.d/*conf is: options libusual bias="ub" diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index c18538e4a6db..2653e73db623 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -132,6 +132,35 @@ static struct us_unusual_dev for_dynamic_ids = #undef COMPLIANT_DEV #undef USUAL_DEV +#ifdef CONFIG_LOCKDEP + +static struct lock_class_key us_interface_key[USB_MAXINTERFACES]; + +static void us_set_lock_class(struct mutex *mutex, + struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_config *config = udev->actconfig; + int i; + + for (i = 0; i < config->desc.bNumInterfaces; i++) { + if (config->interface[i] == intf) + break; + } + + BUG_ON(i == config->desc.bNumInterfaces); + + lockdep_set_class(mutex, &us_interface_key[i]); +} + +#else + +static void us_set_lock_class(struct mutex *mutex, + struct usb_interface *intf) +{ +} + +#endif #ifdef CONFIG_PM /* Minimal support for suspend and resume */ @@ -895,6 +924,7 @@ int usb_stor_probe1(struct us_data **pus, *pus = us = host_to_us(host); memset(us, 0, sizeof(struct us_data)); mutex_init(&(us->dev_mutex)); + us_set_lock_class(&us->dev_mutex, intf); init_completion(&us->cmnd_ready); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c index 2eecec0c13c9..6ec45beb7af5 100644 --- a/drivers/uwb/uwb-debug.c +++ b/drivers/uwb/uwb-debug.c @@ -159,13 +159,6 @@ static int cmd_ie_rm(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_rm) return uwb_rc_ie_rm(rc, ie_to_rm->data[0]); } -static int command_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - - return 0; -} - static ssize_t command_write(struct file *file, const char __user *buf, size_t len, loff_t *off) { @@ -206,7 +199,7 @@ static ssize_t command_write(struct file *file, const char __user *buf, } static const struct file_operations command_fops = { - .open = command_open, + .open = simple_open, .write = command_write, .read = NULL, .llseek = no_llseek, diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 7ed9991fa747..af16884491ed 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -245,6 +245,12 @@ config BACKLIGHT_DA903X If you have a LCD backlight connected to the WLED output of DA9030 or DA9034 WLED output, say Y here to enable this driver. +config BACKLIGHT_DA9052 + tristate "Dialog DA9052/DA9053 WLED" + depends on PMIC_DA9052 + help + Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs. + config BACKLIGHT_MAX8925 tristate "Backlight driver for MAX8925" depends on MFD_MAX8925 diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 8071eb656147..36855ae887d6 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o +obj-$(CONFIG_BACKLIGHT_DA9052) += da9052_bl.o obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c new file mode 100644 index 000000000000..b628d68f5162 --- /dev/null +++ b/drivers/video/backlight/da9052_bl.c @@ -0,0 +1,187 @@ +/* + * Backlight Driver for Dialog DA9052 PMICs + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> + +#define DA9052_MAX_BRIGHTNESS 0xFF + +enum { + DA9052_WLEDS_OFF, + DA9052_WLEDS_ON, +}; + +enum { + DA9052_TYPE_WLED1, + DA9052_TYPE_WLED2, + DA9052_TYPE_WLED3, +}; + +static unsigned char wled_bank[] = { + DA9052_LED1_CONF_REG, + DA9052_LED2_CONF_REG, + DA9052_LED3_CONF_REG, +}; + +struct da9052_bl { + struct da9052 *da9052; + uint brightness; + uint state; + uint led_reg; +}; + +static int da9052_adjust_wled_brightness(struct da9052_bl *wleds) +{ + unsigned char boost_en; + unsigned char i_sink; + int ret; + + boost_en = 0x3F; + i_sink = 0xFF; + if (wleds->state == DA9052_WLEDS_OFF) { + boost_en = 0x00; + i_sink = 0x00; + } + + ret = da9052_reg_write(wleds->da9052, DA9052_BOOST_REG, boost_en); + if (ret < 0) + return ret; + + ret = da9052_reg_write(wleds->da9052, DA9052_LED_CONT_REG, i_sink); + if (ret < 0) + return ret; + + ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], 0x0); + if (ret < 0) + return ret; + + msleep(10); + + if (wleds->brightness) { + ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], + wleds->brightness); + if (ret < 0) + return ret; + } + + return 0; +} + +static int da9052_backlight_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + struct da9052_bl *wleds = bl_get_data(bl); + + wleds->brightness = brightness; + wleds->state = DA9052_WLEDS_ON; + + return da9052_adjust_wled_brightness(wleds); +} + +static int da9052_backlight_get_brightness(struct backlight_device *bl) +{ + struct da9052_bl *wleds = bl_get_data(bl); + + return wleds->brightness; +} + +static const struct backlight_ops da9052_backlight_ops = { + .update_status = da9052_backlight_update_status, + .get_brightness = da9052_backlight_get_brightness, +}; + +static int da9052_backlight_probe(struct platform_device *pdev) +{ + struct backlight_device *bl; + struct backlight_properties props; + struct da9052_bl *wleds; + + wleds = devm_kzalloc(&pdev->dev, sizeof(struct da9052_bl), GFP_KERNEL); + if (!wleds) + return -ENOMEM; + + wleds->da9052 = dev_get_drvdata(pdev->dev.parent); + wleds->brightness = 0; + wleds->led_reg = platform_get_device_id(pdev)->driver_data; + wleds->state = DA9052_WLEDS_OFF; + + props.type = BACKLIGHT_RAW; + props.max_brightness = DA9052_MAX_BRIGHTNESS; + + bl = backlight_device_register(pdev->name, wleds->da9052->dev, wleds, + &da9052_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "Failed to register backlight\n"); + devm_kfree(&pdev->dev, wleds); + return PTR_ERR(bl); + } + + bl->props.max_brightness = DA9052_MAX_BRIGHTNESS; + bl->props.brightness = 0; + platform_set_drvdata(pdev, bl); + + return da9052_adjust_wled_brightness(wleds); +} + +static int da9052_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct da9052_bl *wleds = bl_get_data(bl); + + wleds->brightness = 0; + wleds->state = DA9052_WLEDS_OFF; + da9052_adjust_wled_brightness(wleds); + backlight_device_unregister(bl); + devm_kfree(&pdev->dev, wleds); + + return 0; +} + +static struct platform_device_id da9052_wled_ids[] = { + { + .name = "da9052-wled1", + .driver_data = DA9052_TYPE_WLED1, + }, + { + .name = "da9052-wled2", + .driver_data = DA9052_TYPE_WLED2, + }, + { + .name = "da9052-wled3", + .driver_data = DA9052_TYPE_WLED3, + }, +}; + +static struct platform_driver da9052_wled_driver = { + .probe = da9052_backlight_probe, + .remove = da9052_backlight_remove, + .id_table = da9052_wled_ids, + .driver = { + .name = "da9052-wled", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(da9052_wled_driver); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("Backlight driver for DA9052 PMIC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-backlight"); diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index be20b5cbe26c..3a6d5419e3e3 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -229,14 +229,7 @@ static struct locomo_driver poodle_lcd_driver = { static int __init locomolcd_init(void) { - int ret = locomo_driver_register(&poodle_lcd_driver); - if (ret) - return ret; - -#ifdef CONFIG_SA1100_COLLIE - sa1100fb_lcd_power = locomolcd_power; -#endif - return 0; + return locomo_driver_register(&poodle_lcd_driver); } static void __exit locomolcd_exit(void) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 958e5129c601..05f0a80818a2 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -398,21 +398,8 @@ static int restore_common(struct virtio_device *vdev) return 0; } -static int virtballoon_thaw(struct virtio_device *vdev) -{ - return restore_common(vdev); -} - static int virtballoon_restore(struct virtio_device *vdev) { - struct virtio_balloon *vb = vdev->priv; - - /* - * If a request wasn't complete at the time of freezing, this - * could have been set. - */ - vb->need_stats_update = 0; - return restore_common(vdev); } #endif @@ -434,7 +421,6 @@ static struct virtio_driver virtio_balloon_driver = { #ifdef CONFIG_PM .freeze = virtballoon_freeze, .restore = virtballoon_restore, - .thaw = virtballoon_thaw, #endif }; diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 635e1efb3792..2e03d416b9af 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -720,24 +720,6 @@ static void __devexit virtio_pci_remove(struct pci_dev *pci_dev) } #ifdef CONFIG_PM -static int virtio_pci_suspend(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - - pci_save_state(pci_dev); - pci_set_power_state(pci_dev, PCI_D3hot); - return 0; -} - -static int virtio_pci_resume(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - - pci_restore_state(pci_dev); - pci_set_power_state(pci_dev, PCI_D0); - return 0; -} - static int virtio_pci_freeze(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -758,59 +740,24 @@ static int virtio_pci_freeze(struct device *dev) return ret; } -static int restore_common(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); - int ret; - - ret = pci_enable_device(pci_dev); - if (ret) - return ret; - pci_set_master(pci_dev); - vp_finalize_features(&vp_dev->vdev); - - return ret; -} - -static int virtio_pci_thaw(struct device *dev) +static int virtio_pci_restore(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); struct virtio_driver *drv; int ret; - ret = restore_common(dev); - if (ret) - return ret; - drv = container_of(vp_dev->vdev.dev.driver, struct virtio_driver, driver); - if (drv && drv->thaw) - ret = drv->thaw(&vp_dev->vdev); - else if (drv && drv->restore) - ret = drv->restore(&vp_dev->vdev); - - /* Finally, tell the device we're all set */ - if (!ret) - vp_set_status(&vp_dev->vdev, vp_dev->saved_status); - - return ret; -} - -static int virtio_pci_restore(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); - struct virtio_driver *drv; - int ret; + ret = pci_enable_device(pci_dev); + if (ret) + return ret; - drv = container_of(vp_dev->vdev.dev.driver, - struct virtio_driver, driver); + pci_set_master(pci_dev); + vp_finalize_features(&vp_dev->vdev); - ret = restore_common(dev); - if (!ret && drv && drv->restore) + if (drv && drv->restore) ret = drv->restore(&vp_dev->vdev); /* Finally, tell the device we're all set */ @@ -821,12 +768,7 @@ static int virtio_pci_restore(struct device *dev) } static const struct dev_pm_ops virtio_pci_pm_ops = { - .suspend = virtio_pci_suspend, - .resume = virtio_pci_resume, - .freeze = virtio_pci_freeze, - .thaw = virtio_pci_thaw, - .restore = virtio_pci_restore, - .poweroff = virtio_pci_suspend, + SET_SYSTEM_SLEEP_PM_OPS(virtio_pci_freeze, virtio_pci_restore) }; #endif diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 19e6a2041371..1afb4fba11b4 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -204,7 +204,8 @@ error: void * xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags) + dma_addr_t *dma_handle, gfp_t flags, + struct dma_attrs *attrs) { void *ret; int order = get_order(size); @@ -253,7 +254,7 @@ EXPORT_SYMBOL_GPL(xen_swiotlb_alloc_coherent); void xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr, - dma_addr_t dev_addr) + dma_addr_t dev_addr, struct dma_attrs *attrs) { int order = get_order(size); phys_addr_t phys; diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c index 63616d7453e6..97f5d264c31e 100644 --- a/drivers/xen/xen-pciback/pciback_ops.c +++ b/drivers/xen/xen-pciback/pciback_ops.c @@ -234,7 +234,7 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev, if (dev_data) dev_data->ack_intr = 0; - return result; + return result > 0 ? 0 : result; } static |