diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/xt2000-uart.h')
| -rw-r--r-- | include/asm-xtensa/xtensa/xt2000-uart.h | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/include/asm-xtensa/xtensa/xt2000-uart.h b/include/asm-xtensa/xtensa/xt2000-uart.h new file mode 100644 index 000000000000..0154460f0ed8 --- /dev/null +++ b/include/asm-xtensa/xtensa/xt2000-uart.h @@ -0,0 +1,155 @@ +#ifndef _uart_h_included_ +#define _uart_h_included_ + +/* + * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND + * + * include/asm-xtensa/xtensa/xt2000-uart.h -- NatSemi PC16552D DUART + * definitions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 Tensilica Inc. + */ + + +#include <xtensa/xt2000.h> + + +/* 16550 UART DEVICE REGISTERS + The XT2000 board aligns each register to a 32-bit word but the UART device only uses + one byte of the word, which is the least-significant byte regardless of the + endianness of the core (ie. byte offset 0 for little-endian and 3 for big-endian). + So if using word accesses then endianness doesn't matter. + The macros provided here do that. +*/ +struct uart_dev_s { + union { + unsigned int rxb; /* DLAB=0: receive buffer, read-only */ + unsigned int txb; /* DLAB=0: transmit buffer, write-only */ + unsigned int dll; /* DLAB=1: divisor, least-significant byte latch (was write-only?) */ + } w0; + union { + unsigned int ier; /* DLAB=0: interrupt-enable register (was write-only?) */ + unsigned int dlm; /* DLAB=1: divisor, most-significant byte latch (was write-only?) */ + } w1; + + union { + unsigned int isr; /* DLAB=0: interrupt status register, read-only */ + unsigned int fcr; /* DLAB=0: FIFO control register, write-only */ + unsigned int afr; /* DLAB=1: alternate function register */ + } w2; + + unsigned int lcr; /* line control-register, write-only */ + unsigned int mcr; /* modem control-regsiter, write-only */ + unsigned int lsr; /* line status register, read-only */ + unsigned int msr; /* modem status register, read-only */ + unsigned int scr; /* scratch regsiter, read/write */ +}; + +#define _RXB(u) ((u)->w0.rxb) +#define _TXB(u) ((u)->w0.txb) +#define _DLL(u) ((u)->w0.dll) +#define _IER(u) ((u)->w1.ier) +#define _DLM(u) ((u)->w1.dlm) +#define _ISR(u) ((u)->w2.isr) +#define _FCR(u) ((u)->w2.fcr) +#define _AFR(u) ((u)->w2.afr) +#define _LCR(u) ((u)->lcr) +#define _MCR(u) ((u)->mcr) +#define _LSR(u) ((u)->lsr) +#define _MSR(u) ((u)->msr) +#define _SCR(u) ((u)->scr) + +typedef volatile struct uart_dev_s uart_dev_t; + +/* IER bits */ +#define RCVR_DATA_REG_INTENABLE 0x01 +#define XMIT_HOLD_REG_INTENABLE 0x02 +#define RCVR_STATUS_INTENABLE 0x04 +#define MODEM_STATUS_INTENABLE 0x08 + +/* FCR bits */ +#define _FIFO_ENABLE 0x01 +#define RCVR_FIFO_RESET 0x02 +#define XMIT_FIFO_RESET 0x04 +#define DMA_MODE_SELECT 0x08 +#define RCVR_TRIGGER_LSB 0x40 +#define RCVR_TRIGGER_MSB 0x80 + +/* AFR bits */ +#define AFR_CONC_WRITE 0x01 +#define AFR_BAUDOUT_SEL 0x02 +#define AFR_RXRDY_SEL 0x04 + +/* ISR bits */ +#define INT_STATUS(r) ((r)&1) +#define INT_PRIORITY(r) (((r)>>1)&0x7) + +/* LCR bits */ +#define WORD_LENGTH(n) (((n)-5)&0x3) +#define STOP_BIT_ENABLE 0x04 +#define PARITY_ENABLE 0x08 +#define EVEN_PARITY 0x10 +#define FORCE_PARITY 0x20 +#define XMIT_BREAK 0x40 +#define DLAB_ENABLE 0x80 + +/* MCR bits */ +#define _DTR 0x01 +#define _RTS 0x02 +#define _OP1 0x04 +#define _OP2 0x08 +#define LOOP_BACK 0x10 + +/* LSR Bits */ +#define RCVR_DATA_READY 0x01 +#define OVERRUN_ERROR 0x02 +#define PARITY_ERROR 0x04 +#define FRAMING_ERROR 0x08 +#define BREAK_INTERRUPT 0x10 +#define XMIT_HOLD_EMPTY 0x20 +#define XMIT_EMPTY 0x40 +#define FIFO_ERROR 0x80 +#define RCVR_READY(u) (_LSR(u)&RCVR_DATA_READY) +#define XMIT_READY(u) (_LSR(u)&XMIT_HOLD_EMPTY) + +/* MSR bits */ +#define _RDR 0x01 +#define DELTA_DSR 0x02 +#define DELTA_RI 0x04 +#define DELTA_CD 0x08 +#define _CTS 0x10 +#define _DSR 0x20 +#define _RI 0x40 +#define _CD 0x80 + +/* prototypes */ +void uart_init( uart_dev_t *u, int bitrate ); +void uart_out( uart_dev_t *u, char c ); +void uart_puts( uart_dev_t *u, char *s ); +char uart_in( uart_dev_t *u ); +void uart_enable_rcvr_int( uart_dev_t *u ); +void uart_disable_rcvr_int( uart_dev_t *u ); + +#ifdef DUART16552_1_VADDR +/* DUART present. */ +#define DUART_1_BASE (*(uart_dev_t*)DUART16552_1_VADDR) +#define DUART_2_BASE (*(uart_dev_t*)DUART16552_2_VADDR) +#define UART1_PUTS(s) uart_puts( &DUART_1_BASE, s ) +#define UART2_PUTS(s) uart_puts( &DUART_2_BASE, s ) +#else +/* DUART not configured, use dummy placeholders to allow compiles to work. */ +#define DUART_1_BASE (*(uart_dev_t*)0) +#define DUART_2_BASE (*(uart_dev_t*)0) +#define UART1_PUTS(s) +#define UART2_PUTS(s) +#endif + +/* Compute 16-bit divisor for baudrate generator, with rounding: */ +#define DUART_DIVISOR(crystal,speed) (((crystal)/16 + (speed)/2)/(speed)) + +#endif /*_uart_h_included_*/ + |