diff options
Diffstat (limited to 'include/linux/platform_data')
24 files changed, 487 insertions, 33 deletions
diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h index 24368a2e8b87..798fb80b024b 100644 --- a/include/linux/platform_data/cpsw.h +++ b/include/linux/platform_data/cpsw.h @@ -21,6 +21,8 @@ struct cpsw_slave_data { char phy_id[MII_BUS_ID_SIZE]; int phy_if; u8 mac_addr[ETH_ALEN]; + u16 dual_emac_res_vlan; /* Reserved VLAN for DualEMAC */ + }; struct cpsw_platform_data { @@ -35,6 +37,8 @@ struct cpsw_platform_data { u32 bd_ram_size; /*buffer descriptor ram size */ u32 rx_descs; /* Number of Rx Descriptios */ u32 mac_control; /* Mac control register */ + u16 default_vlan; /* Def VLAN for ALE lookup in VLAN aware mode*/ + bool dual_emac; /* Enable Dual EMAC mode */ }; #endif /* __CPSW_H__ */ diff --git a/include/linux/platform_data/dma-coh901318.h b/include/linux/platform_data/dma-coh901318.h new file mode 100644 index 000000000000..c4cb9590d115 --- /dev/null +++ b/include/linux/platform_data/dma-coh901318.h @@ -0,0 +1,72 @@ +/* + * Platform data for the COH901318 DMA controller + * Copyright (C) 2007-2013 ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef PLAT_COH901318_H +#define PLAT_COH901318_H + +#ifdef CONFIG_COH901318 + +/* We only support the U300 DMA channels */ +#define U300_DMA_MSL_TX_0 0 +#define U300_DMA_MSL_TX_1 1 +#define U300_DMA_MSL_TX_2 2 +#define U300_DMA_MSL_TX_3 3 +#define U300_DMA_MSL_TX_4 4 +#define U300_DMA_MSL_TX_5 5 +#define U300_DMA_MSL_TX_6 6 +#define U300_DMA_MSL_RX_0 7 +#define U300_DMA_MSL_RX_1 8 +#define U300_DMA_MSL_RX_2 9 +#define U300_DMA_MSL_RX_3 10 +#define U300_DMA_MSL_RX_4 11 +#define U300_DMA_MSL_RX_5 12 +#define U300_DMA_MSL_RX_6 13 +#define U300_DMA_MMCSD_RX_TX 14 +#define U300_DMA_MSPRO_TX 15 +#define U300_DMA_MSPRO_RX 16 +#define U300_DMA_UART0_TX 17 +#define U300_DMA_UART0_RX 18 +#define U300_DMA_APEX_TX 19 +#define U300_DMA_APEX_RX 20 +#define U300_DMA_PCM_I2S0_TX 21 +#define U300_DMA_PCM_I2S0_RX 22 +#define U300_DMA_PCM_I2S1_TX 23 +#define U300_DMA_PCM_I2S1_RX 24 +#define U300_DMA_XGAM_CDI 25 +#define U300_DMA_XGAM_PDI 26 +#define U300_DMA_SPI_TX 27 +#define U300_DMA_SPI_RX 28 +#define U300_DMA_GENERAL_PURPOSE_0 29 +#define U300_DMA_GENERAL_PURPOSE_1 30 +#define U300_DMA_GENERAL_PURPOSE_2 31 +#define U300_DMA_GENERAL_PURPOSE_3 32 +#define U300_DMA_GENERAL_PURPOSE_4 33 +#define U300_DMA_GENERAL_PURPOSE_5 34 +#define U300_DMA_GENERAL_PURPOSE_6 35 +#define U300_DMA_GENERAL_PURPOSE_7 36 +#define U300_DMA_GENERAL_PURPOSE_8 37 +#define U300_DMA_UART1_TX 38 +#define U300_DMA_UART1_RX 39 + +#define U300_DMA_DEVICE_CHANNELS 32 +#define U300_DMA_CHANNELS 40 + +/** + * coh901318_filter_id() - DMA channel filter function + * @chan: dma channel handle + * @chan_id: id of dma channel to be filter out + * + * In dma_request_channel() it specifies what channel id to be requested + */ +bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); +#else +static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) +{ + return false; +} +#endif + +#endif /* PLAT_COH901318_H */ diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index 9ff93b065686..4b781014b0a0 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -147,6 +147,16 @@ struct stedma40_chan_cfg { * @memcpy_conf_log: default configuration of logical channel memcpy * @disabled_channels: A vector, ending with -1, that marks physical channels * that are for different reasons not available for the driver. + * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW + * which avoids HW bug that exists in some versions of the controller. + * SoftLLI introduces relink overhead that could impact performace for + * certain use cases. + * @num_of_soft_lli_chans: The number of channels that needs to be configured + * to use SoftLLI. + * @use_esram_lcla: flag for mapping the lcla into esram region + * @num_of_phy_chans: The number of physical channels implemented in HW. + * 0 means reading the number of channels from DMA HW but this is only valid + * for 'multiple of 4' channels, like 8. */ struct stedma40_platform_data { u32 dev_len; @@ -157,7 +167,10 @@ struct stedma40_platform_data { struct stedma40_chan_cfg *memcpy_conf_phy; struct stedma40_chan_cfg *memcpy_conf_log; int disabled_channels[STEDMA40_MAX_PHYS]; + int *soft_lli_chans; + int num_of_soft_lli_chans; bool use_esram_lcla; + int num_of_phy_chans; }; #ifdef CONFIG_STE_DMA40 diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h index a7bdb2f63b73..da7e6274b175 100644 --- a/include/linux/platform_data/exynos_thermal.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -53,6 +53,8 @@ struct freq_clip_table { * struct exynos_tmu_platform_data * @threshold: basic temperature for generating interrupt * 25 <= threshold <= 125 [unit: degree Celsius] + * @threshold_falling: differntial value for setting threshold + * of temperature falling interrupt. * @trigger_levels: array for each interrupt levels * [unit: degree Celsius] * 0: temperature for trigger_level0 interrupt @@ -97,6 +99,7 @@ struct freq_clip_table { */ struct exynos_tmu_platform_data { u8 threshold; + u8 threshold_falling; u8 trigger_levels[4]; bool trigger_level0_en; bool trigger_level1_en; diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h index 51d52e767a19..2a50048c1c44 100644 --- a/include/linux/platform_data/i2c-s3c2410.h +++ b/include/linux/platform_data/i2c-s3c2410.h @@ -15,6 +15,8 @@ #define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ +struct platform_device; + /** * struct s3c2410_platform_i2c - Platform data for s3c I2C. * @bus_num: The bus number to use (if possible). diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h new file mode 100644 index 000000000000..ad3aa7b95f35 --- /dev/null +++ b/include/linux/platform_data/invensense_mpu6050.h @@ -0,0 +1,31 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __INV_MPU6050_PLATFORM_H_ +#define __INV_MPU6050_PLATFORM_H_ + +/** + * struct inv_mpu6050_platform_data - Platform data for the mpu driver + * @orientation: Orientation matrix of the chip + * + * Contains platform specific information on how to configure the MPU6050 to + * work on this platform. The orientation matricies are 3x3 rotation matricies + * that are applied to the data to rotate from the mounting orientation to the + * platform orientation. The values must be one of 0, 1, or -1 and each row and + * column should have exactly 1 non-zero value. + */ +struct inv_mpu6050_platform_data { + __s8 orientation[9]; +}; + +#endif diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h new file mode 100644 index 000000000000..1509570d5a3f --- /dev/null +++ b/include/linux/platform_data/leds-lp55xx.h @@ -0,0 +1,87 @@ +/* + * LP55XX Platform Data Header + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * Derived from leds-lp5521.h, leds-lp5523.h + */ + +#ifndef _LEDS_LP55XX_H +#define _LEDS_LP55XX_H + +/* Clock configuration */ +#define LP55XX_CLOCK_AUTO 0 +#define LP55XX_CLOCK_INT 1 +#define LP55XX_CLOCK_EXT 2 + +/* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */ +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ +#define LP5521_CLK_INT 1 /* Internal clock */ +#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ + +struct lp55xx_led_config { + const char *name; + u8 chan_nr; + u8 led_current; /* mA x10, 0 if led is not connected */ + u8 max_current; +}; + +struct lp55xx_predef_pattern { + u8 *r; + u8 *g; + u8 *b; + u8 size_r; + u8 size_g; + u8 size_b; +}; + +/* + * struct lp55xx_platform_data + * @led_config : Configurable led class device + * @num_channels : Number of LED channels + * @label : Used for naming LEDs + * @clock_mode : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT + * @setup_resources : Platform specific function before enabling the chip + * @release_resources : Platform specific function after disabling the chip + * @enable : EN pin control by platform side + * @patterns : Predefined pattern data for RGB channels + * @num_patterns : Number of patterns + * @update_config : Value of CONFIG register + */ +struct lp55xx_platform_data { + + /* LED channel configuration */ + struct lp55xx_led_config *led_config; + u8 num_channels; + const char *label; + + /* Clock configuration */ + u8 clock_mode; + + /* Platform specific functions */ + int (*setup_resources)(void); + void (*release_resources)(void); + void (*enable)(bool state); + + /* Predefined pattern data */ + struct lp55xx_predef_pattern *patterns; + unsigned int num_patterns; + + /* _CONFIG register */ + u8 update_config; +}; + +#endif /* _LEDS_LP55XX_H */ diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index e81f62d24ee2..20ee8b221dbd 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -49,12 +49,24 @@ #define LP8556_FAST_CONFIG BIT(7) /* use it if EPROMs should be maintained when exiting the low power mode */ +/* CONFIG register - LP8557 */ +#define LP8557_PWM_STANDBY BIT(7) +#define LP8557_PWM_FILTER BIT(6) +#define LP8557_RELOAD_EPROM BIT(3) /* use it if EPROMs should be reset + when the backlight turns on */ +#define LP8557_OFF_OPENLEDS BIT(2) +#define LP8557_PWM_CONFIG LP8557_PWM_ONLY +#define LP8557_I2C_CONFIG LP8557_I2C_ONLY +#define LP8557_COMB1_CONFIG LP8557_COMBINED1 +#define LP8557_COMB2_CONFIG LP8557_COMBINED2 + enum lp855x_chip_id { LP8550, LP8551, LP8552, LP8553, LP8556, + LP8557, }; enum lp855x_brightness_ctrl_mode { @@ -89,6 +101,13 @@ enum lp8556_brightness_source { LP8556_COMBINED2, /* pwm + i2c after the shaper block */ }; +enum lp8557_brightness_source { + LP8557_PWM_ONLY, + LP8557_I2C_ONLY, + LP8557_COMBINED1, /* pwm + i2c after the shaper block */ + LP8557_COMBINED2, /* pwm + i2c before the shaper block */ +}; + struct lp855x_rom_data { u8 addr; u8 val; diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h new file mode 100644 index 000000000000..a7fd0776c9bf --- /dev/null +++ b/include/linux/platform_data/lp8755.h @@ -0,0 +1,71 @@ +/* + * LP8755 High Performance Power Management Unit Driver:System Interface Driver + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com> + * G.Shark Jeong <gshark.jeong@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP8755_H +#define _LP8755_H + +#include <linux/regulator/consumer.h> + +#define LP8755_NAME "lp8755-regulator" +/* + *PWR FAULT : power fault detected + *OCP : over current protect activated + *OVP : over voltage protect activated + *TEMP_WARN : thermal warning + *TEMP_SHDN : thermal shutdonw detected + *I_LOAD : current measured + */ +#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL +#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT +#define LP8755_EVENT_OVP 0x10000 +#define LP8755_EVENT_TEMP_WARN 0x2000 +#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP +#define LP8755_EVENT_I_LOAD 0x40000 + +enum lp8755_bucks { + LP8755_BUCK0 = 0, + LP8755_BUCK1, + LP8755_BUCK2, + LP8755_BUCK3, + LP8755_BUCK4, + LP8755_BUCK5, + LP8755_BUCK_MAX, +}; + +/** + * multiphase configuration options + */ +enum lp8755_mphase_config { + MPHASE_CONF0, + MPHASE_CONF1, + MPHASE_CONF2, + MPHASE_CONF3, + MPHASE_CONF4, + MPHASE_CONF5, + MPHASE_CONF6, + MPHASE_CONF7, + MPHASE_CONF8, + MPHASE_CONF_MAX +}; + +/** + * struct lp8755_platform_data + * @mphase_type : Multiphase Switcher Configurations. + * @buck_data : buck0~6 init voltage in uV + */ +struct lp8755_platform_data { + int mphase; + struct regulator_init_data *buck_data[LP8755_BUCK_MAX]; +}; +#endif diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h new file mode 100644 index 000000000000..ed9d3b3daf02 --- /dev/null +++ b/include/linux/platform_data/max6697.h @@ -0,0 +1,36 @@ +/* + * max6697.h + * Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MAX6697_H +#define MAX6697_H + +#include <linux/types.h> + +/* + * For all bit masks: + * bit 0: local temperature + * bit 1..7: remote temperatures + */ +struct max6697_platform_data { + bool smbus_timeout_disable; /* set to disable SMBus timeouts */ + bool extended_range_enable; /* set to enable extended temp range */ + bool beta_compensation; /* set to enable beta compensation */ + u8 alert_mask; /* set bit to 1 to disable alert */ + u8 over_temperature_mask; /* set bit to 1 to disable */ + u8 resistance_cancellation; /* set bit to 0 to disable + * bit mask for MAX6581, + * boolean for other chips + */ + u8 ideality_mask; /* set bit to 0 to disable */ + u8 ideality_value; /* transistor ideality as per + * MAX6581 datasheet + */ +}; + +#endif /* MAX6697_H */ diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h new file mode 100644 index 000000000000..cfda59b226ee --- /dev/null +++ b/include/linux/platform_data/microread.h @@ -0,0 +1,35 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) 2011 Tieto Poland + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _MICROREAD_H +#define _MICROREAD_H + +#include <linux/i2c.h> + +#define MICROREAD_DRIVER_NAME "microread" + +/* board config platform data for microread */ +struct microread_nfc_platform_data { + unsigned int rst_gpio; + unsigned int irq_gpio; + unsigned int ioh_gpio; +}; + +#endif /* _MICROREAD_H */ diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index aaf97481f413..b4a0521ce411 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -39,5 +39,6 @@ struct esdhc_platform_data { unsigned int cd_gpio; enum wp_types wp_type; enum cd_types cd_type; + int max_bus_width; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/include/linux/platform_data/mmc-sdhci-tegra.h b/include/linux/platform_data/mmc-sdhci-tegra.h deleted file mode 100644 index 8f8430697686..000000000000 --- a/include/linux/platform_data/mmc-sdhci-tegra.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2009 Palm, Inc. - * Author: Yvonne Yip <y@palm.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef __PLATFORM_DATA_TEGRA_SDHCI_H -#define __PLATFORM_DATA_TEGRA_SDHCI_H - -#include <linux/mmc/host.h> - -struct tegra_sdhci_platform_data { - int cd_gpio; - int wp_gpio; - int power_gpio; - int is_8bit; - int pm_flags; -}; - -#endif diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 24d32ca34bef..6bf9ef43ddb1 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -60,6 +60,8 @@ struct omap_nand_platform_data { int devsize; enum omap_ecc ecc_opt; struct gpmc_nand_regs reg; -}; + /* for passing the partitions */ + struct device_node *of_node; +}; #endif diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h index 685af7e8b120..e9a9fb188f97 100644 --- a/include/linux/platform_data/mtd-onenand-omap2.h +++ b/include/linux/platform_data/mtd-onenand-omap2.h @@ -29,5 +29,8 @@ struct omap_onenand_platform_data { u8 flags; u8 regulator_can_sleep; u8 skip_initial_unlocking; + + /* for passing the partitions */ + struct device_node *of_node; }; #endif diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h index 8b79e0967f9c..3f1cbf95ec3b 100644 --- a/include/linux/platform_data/s3c-hsotg.h +++ b/include/linux/platform_data/s3c-hsotg.h @@ -15,6 +15,8 @@ #ifndef __LINUX_USB_S3C_HSOTG_H #define __LINUX_USB_S3C_HSOTG_H +struct platform_device; + enum s3c_hsotg_dmamode { S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ S3C_HSOTG_DMA_ONLY, /* always use DMA */ diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h new file mode 100644 index 000000000000..1bd24cba982b --- /dev/null +++ b/include/linux/platform_data/samsung-usbphy.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * http://www.samsung.com/ + * Author: Praveen Paneri <p.paneri@samsung.com> + * + * Defines platform data for samsung usb phy driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __SAMSUNG_USBPHY_PLATFORM_H +#define __SAMSUNG_USBPHY_PLATFORM_H + +/** + * samsung_usbphy_data - Platform data for USB PHY driver. + * @pmu_isolation: Function to control usb phy isolation in PMU. + */ +struct samsung_usbphy_data { + void (*pmu_isolation)(int on); +}; + +extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd); + +#endif /* __SAMSUNG_USBPHY_PLATFORM_H */ diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index 7311ccd3217f..215574d1e81d 100644 --- a/include/linux/platform_data/sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -11,8 +11,8 @@ * (at your option) any later version. */ -#ifndef __SCCNXP_H -#define __SCCNXP_H +#ifndef _PLATFORM_DATA_SERIAL_SCCNXP_H_ +#define _PLATFORM_DATA_SERIAL_SCCNXP_H_ #define SCCNXP_MAX_UARTS 2 @@ -84,6 +84,8 @@ struct sccnxp_pdata { const u8 reg_shift; /* Modem control lines configuration */ const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + /* Timer value for polling mode (usecs) */ + const unsigned int poll_time_us; /* Called during startup */ void (*init)(void); /* Called before finish */ diff --git a/include/linux/platform_data/sh_ipmmu.h b/include/linux/platform_data/sh_ipmmu.h new file mode 100644 index 000000000000..39f7405cdac5 --- /dev/null +++ b/include/linux/platform_data/sh_ipmmu.h @@ -0,0 +1,18 @@ +/* sh_ipmmu.h + * + * Copyright (C) 2012 Hideki EIRAKU + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#ifndef __SH_IPMMU_H__ +#define __SH_IPMMU_H__ + +struct shmobile_ipmmu_platform_data { + const char * const *dev_names; + unsigned int num_dev_names; +}; + +#endif /* __SH_IPMMU_H__ */ diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index a65572d53211..c100456eab17 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -22,6 +22,9 @@ struct omap2_mcspi_dev_attr { struct omap2_mcspi_device_config { unsigned turbo_mode:1; + + /* toggle chip select after every word */ + unsigned cs_per_word:1; }; #endif diff --git a/include/linux/platform_data/tsl2563.h b/include/linux/platform_data/tsl2563.h new file mode 100644 index 000000000000..c90d7a09dda7 --- /dev/null +++ b/include/linux/platform_data/tsl2563.h @@ -0,0 +1,8 @@ +#ifndef __LINUX_TSL2563_H +#define __LINUX_TSL2563_H + +struct tsl2563_platform_data { + int cover_comp_gain; +}; + +#endif /* __LINUX_TSL2563_H */ diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h index ef65b67c56c3..fa579b4c666b 100644 --- a/include/linux/platform_data/usb-omap.h +++ b/include/linux/platform_data/usb-omap.h @@ -55,13 +55,18 @@ struct ohci_hcd_omap_platform_data { }; struct usbhs_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int nports; + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + struct regulator *regulator[OMAP3_HS_USB_PORTS]; struct ehci_hcd_omap_platform_data *ehci_data; struct ohci_hcd_omap_platform_data *ohci_data; /* OMAP3 <= ES2.1 have a single ulpi bypass control bit */ - unsigned single_ulpi_bypass:1; + unsigned single_ulpi_bypass:1; + unsigned es2_compatibility:1; + unsigned phy_reset:1; }; /*-------------------------------------------------------------------------*/ diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h new file mode 100644 index 000000000000..85dcc709f7e9 --- /dev/null +++ b/include/linux/platform_data/usb3503.h @@ -0,0 +1,19 @@ +#ifndef __USB3503_H__ +#define __USB3503_H__ + +#define USB3503_I2C_NAME "usb3503" + +enum usb3503_mode { + USB3503_MODE_UNKNOWN, + USB3503_MODE_HUB, + USB3503_MODE_STANDBY, +}; + +struct usb3503_platform_data { + enum usb3503_mode initial_mode; + int gpio_intn; + int gpio_connect; + int gpio_reset; +}; + +#endif diff --git a/include/linux/platform_data/ux500_wdt.h b/include/linux/platform_data/ux500_wdt.h new file mode 100644 index 000000000000..1689ff4c3bfd --- /dev/null +++ b/include/linux/platform_data/ux500_wdt.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) ST Ericsson SA 2011 + * + * License Terms: GNU General Public License v2 + * + * STE Ux500 Watchdog platform data + */ +#ifndef __UX500_WDT_H +#define __UX500_WDT_H + +/** + * struct ux500_wdt_data + */ +struct ux500_wdt_data { + unsigned int timeout; + bool has_28_bits_resolution; +}; + +#endif /* __UX500_WDT_H */ |