diff options
Diffstat (limited to 'include/uapi/linux')
49 files changed, 990 insertions, 257 deletions
diff --git a/include/uapi/linux/aspeed-p2a-ctrl.h b/include/uapi/linux/aspeed-p2a-ctrl.h new file mode 100644 index 000000000000..033355552a6e --- /dev/null +++ b/include/uapi/linux/aspeed-p2a-ctrl.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright 2019 Google Inc + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Provides a simple driver to control the ASPEED P2A interface which allows + * the host to read and write to various regions of the BMC's memory. + */ + +#ifndef _UAPI_LINUX_ASPEED_P2A_CTRL_H +#define _UAPI_LINUX_ASPEED_P2A_CTRL_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +#define ASPEED_P2A_CTRL_READ_ONLY 0 +#define ASPEED_P2A_CTRL_READWRITE 1 + +/* + * This driver provides a mechanism for enabling or disabling the read-write + * property of specific windows into the ASPEED BMC's memory. + * + * A user can map a region of the BMC's memory as read-only or read-write, with + * the caveat that once any region is mapped, all regions are unlocked for + * reading. + */ + +/* + * Unlock a region of BMC physical memory for access from the host. + * + * Also used to read back the optional memory-region configuration for the + * driver. + */ +struct aspeed_p2a_ctrl_mapping { + __u64 addr; + __u32 length; + __u32 flags; +}; + +#define __ASPEED_P2A_CTRL_IOCTL_MAGIC 0xb3 + +/* + * This IOCTL is meant to configure a region or regions of memory given a + * starting address and length to be readable by the host, or + * readable-writeable. + */ +#define ASPEED_P2A_CTRL_IOCTL_SET_WINDOW _IOW(__ASPEED_P2A_CTRL_IOCTL_MAGIC, \ + 0x00, struct aspeed_p2a_ctrl_mapping) + +/* + * This IOCTL is meant to read back to the user the base address and length of + * the memory-region specified to the driver for use with mmap. + */ +#define ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG \ + _IOWR(__ASPEED_P2A_CTRL_IOCTL_MAGIC, \ + 0x01, struct aspeed_p2a_ctrl_mapping) + +#endif /* _UAPI_LINUX_ASPEED_P2A_CTRL_H */ diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index f28acd952d03..a1280af20336 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -114,6 +114,8 @@ #define AUDIT_REPLACE 1329 /* Replace auditd if this packet unanswerd */ #define AUDIT_KERN_MODULE 1330 /* Kernel Module events */ #define AUDIT_FANOTIFY 1331 /* Fanotify access decision */ +#define AUDIT_TIME_INJOFFSET 1332 /* Timekeeping offset injected */ +#define AUDIT_TIME_ADJNTPVAL 1333 /* NTP value adjustment */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ @@ -375,11 +377,19 @@ enum { #define AUDIT_ARCH_AARCH64 (EM_AARCH64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_ARCOMPACT (EM_ARCOMPACT|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_ARCOMPACTBE (EM_ARCOMPACT) +#define AUDIT_ARCH_ARCV2 (EM_ARCV2|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_ARCV2BE (EM_ARCV2) #define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE) #define AUDIT_ARCH_ARMEB (EM_ARM) +#define AUDIT_ARCH_C6X (EM_TI_C6000|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_C6XBE (EM_TI_C6000) #define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE) #define AUDIT_ARCH_CSKY (EM_CSKY|__AUDIT_ARCH_LE) #define AUDIT_ARCH_FRV (EM_FRV) +#define AUDIT_ARCH_H8300 (EM_H8_300) +#define AUDIT_ARCH_HEXAGON (EM_HEXAGON) #define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) #define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_M32R (EM_M32R) @@ -393,6 +403,9 @@ enum { #define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_MIPSEL64N32 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE|\ __AUDIT_ARCH_CONVENTION_MIPS64_N32) +#define AUDIT_ARCH_NDS32 (EM_NDS32|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_NDS32BE (EM_NDS32) +#define AUDIT_ARCH_NIOS2 (EM_ALTERA_NIOS2|__AUDIT_ARCH_LE) #define AUDIT_ARCH_OPENRISC (EM_OPENRISC) #define AUDIT_ARCH_PARISC (EM_PARISC) #define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT) @@ -413,6 +426,7 @@ enum { #define AUDIT_ARCH_TILEGX (EM_TILEGX|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_TILEGX32 (EM_TILEGX|__AUDIT_ARCH_LE) #define AUDIT_ARCH_TILEPRO (EM_TILEPRO|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_UNICORE (EM_UNICORE|__AUDIT_ARCH_LE) #define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_XTENSA (EM_XTENSA) diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h index c99336f4eefe..4ebc2135e950 100644 --- a/include/uapi/linux/batadv_packet.h +++ b/include/uapi/linux/batadv_packet.h @@ -2,18 +2,6 @@ /* Copyright (C) 2007-2019 B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _UAPI_LINUX_BATADV_PACKET_H_ diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h index 305bf316dd03..67f4636758af 100644 --- a/include/uapi/linux/batman_adv.h +++ b/include/uapi/linux/batman_adv.h @@ -2,24 +2,6 @@ /* Copyright (C) 2016-2019 B.A.T.M.A.N. contributors: * * Matthias Schiffer - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. */ #ifndef _UAPI_LINUX_BATMAN_ADV_H_ @@ -491,6 +473,13 @@ enum batadv_nl_attrs { */ BATADV_ATTR_THROUGHPUT_OVERRIDE, + /** + * @BATADV_ATTR_MULTICAST_FANOUT: defines the maximum number of packet + * copies that may be generated for a multicast-to-unicast conversion. + * Once this limit is exceeded distribution will fall back to broadcast. + */ + BATADV_ATTR_MULTICAST_FANOUT, + /* add attributes above here, update the policy in netlink.c */ /** diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 929c8e537a14..63e0cf66f01a 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -105,6 +105,7 @@ enum bpf_cmd { BPF_BTF_GET_FD_BY_ID, BPF_TASK_FD_QUERY, BPF_MAP_LOOKUP_AND_DELETE_ELEM, + BPF_MAP_FREEZE, }; enum bpf_map_type { @@ -132,6 +133,7 @@ enum bpf_map_type { BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, BPF_MAP_TYPE_QUEUE, BPF_MAP_TYPE_STACK, + BPF_MAP_TYPE_SK_STORAGE, }; /* Note that tracing related programs such as @@ -166,6 +168,8 @@ enum bpf_prog_type { BPF_PROG_TYPE_LIRC_MODE2, BPF_PROG_TYPE_SK_REUSEPORT, BPF_PROG_TYPE_FLOW_DISSECTOR, + BPF_PROG_TYPE_CGROUP_SYSCTL, + BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, }; enum bpf_attach_type { @@ -187,6 +191,7 @@ enum bpf_attach_type { BPF_CGROUP_UDP6_SENDMSG, BPF_LIRC_MODE2, BPF_FLOW_DISSECTOR, + BPF_CGROUP_SYSCTL, __MAX_BPF_ATTACH_TYPE }; @@ -255,8 +260,19 @@ enum bpf_attach_type { */ #define BPF_F_ANY_ALIGNMENT (1U << 1) -/* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */ +/* When BPF ldimm64's insn[0].src_reg != 0 then this can have + * two extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_FD BPF_PSEUDO_MAP_VALUE + * insn[0].imm: map fd map fd + * insn[1].imm: 0 offset into value + * insn[0].off: 0 0 + * insn[1].off: 0 0 + * ldimm64 rewrite: address of map address of map[0]+offset + * verifier type: CONST_PTR_TO_MAP PTR_TO_MAP_VALUE + */ #define BPF_PSEUDO_MAP_FD 1 +#define BPF_PSEUDO_MAP_VALUE 2 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative * offset to another bpf function @@ -283,7 +299,7 @@ enum bpf_attach_type { #define BPF_OBJ_NAME_LEN 16U -/* Flags for accessing BPF object */ +/* Flags for accessing BPF object from syscall side. */ #define BPF_F_RDONLY (1U << 3) #define BPF_F_WRONLY (1U << 4) @@ -293,6 +309,10 @@ enum bpf_attach_type { /* Zero-initialize hash function seed. This should only be used for testing. */ #define BPF_F_ZERO_SEED (1U << 6) +/* Flags for accessing BPF object from program side. */ +#define BPF_F_RDONLY_PROG (1U << 7) +#define BPF_F_WRONLY_PROG (1U << 8) + /* flags for BPF_PROG_QUERY */ #define BPF_F_QUERY_EFFECTIVE (1U << 0) @@ -396,6 +416,13 @@ union bpf_attr { __aligned_u64 data_out; __u32 repeat; __u32 duration; + __u32 ctx_size_in; /* input: len of ctx_in */ + __u32 ctx_size_out; /* input/output: len of ctx_out + * returns ENOSPC if ctx_out + * is too small. + */ + __aligned_u64 ctx_in; + __aligned_u64 ctx_out; } test; struct { /* anonymous struct used by BPF_*_GET_*_ID */ @@ -602,7 +629,7 @@ union bpf_attr { * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ * **->swhash** and *skb*\ **->l4hash** to 0). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -627,7 +654,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -659,7 +686,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -714,7 +741,7 @@ union bpf_attr { * efficient, but it is handled through an action code where the * redirection happens only after the eBPF program has returned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -779,7 +806,7 @@ union bpf_attr { * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to * be **ETH_P_8021Q**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -791,7 +818,7 @@ union bpf_attr { * Description * Pop a VLAN header from the packet associated to *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1141,7 +1168,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1254,7 +1281,7 @@ union bpf_attr { * implicitly linearizes, unclones and drops offloads from the * *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1290,7 +1317,7 @@ union bpf_attr { * **bpf_skb_pull_data()** to effectively unclone the *skb* from * the very beginning in case it is indeed cloned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1342,7 +1369,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1357,7 +1384,7 @@ union bpf_attr { * can be used to prepare the packet for pushing or popping * headers. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1478,15 +1505,33 @@ union bpf_attr { * Grow or shrink the room for data in the packet associated to * *skb* by *len_diff*, and according to the selected *mode*. * - * There is a single supported mode at this time: + * There are two supported modes at this time: + * + * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer + * (room space is added or removed below the layer 2 header). * * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer * (room space is added or removed below the layer 3 header). * - * All values for *flags* are reserved for future usage, and must - * be left at zero. + * The following flags are supported at this time: + * + * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. + * Adjusting mss in this way is not allowed for datagrams. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: + * Any new space is reserved to hold a tunnel header. + * Configure skb offsets and other fields accordingly. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, + * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: + * Use with ENCAP_L3 flags to further specify the tunnel type. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): + * Use with ENCAP_L3/L4 flags to further specify the tunnel + * type; *len* is the length of the inner MAC header. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1565,7 +1610,7 @@ union bpf_attr { * more flexibility as the user is free to store whatever meta * data they need. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1694,12 +1739,19 @@ union bpf_attr { * error if an eBPF program tries to set a callback that is not * supported in the current kernel. * - * The supported callback values that *argval* can combine are: + * *argval* is a flag array which can combine these flags: * * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) * + * Therefore, this function can be used to clear a callback flag by + * setting the appropriate bit to zero. e.g. to disable the RTO + * callback: + * + * **bpf_sock_ops_cb_flags_set(bpf_sock,** + * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** + * * Here are some examples of where one could call such eBPF * program: * @@ -1800,7 +1852,7 @@ union bpf_attr { * copied if necessary (i.e. if data was not linear and if start * and end pointers do not point to the same chunk). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1834,7 +1886,7 @@ union bpf_attr { * only possible to shrink the packet as of this writing, * therefore *delta* must be a negative integer. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2009,18 +2061,18 @@ union bpf_attr { * **BPF_LWT_ENCAP_IP** * IP encapsulation (GRE/GUE/IPIP/etc). The outer header * must be IPv4 or IPv6, followed by zero or more - * additional headers, up to LWT_BPF_MAX_HEADROOM total - * bytes in all prepended headers. Please note that - * if skb_is_gso(skb) is true, no more than two headers - * can be prepended, and the inner header, if present, - * should be either GRE or UDP/GUE. - * - * BPF_LWT_ENCAP_SEG6*** types can be called by bpf programs of - * type BPF_PROG_TYPE_LWT_IN; BPF_LWT_ENCAP_IP type can be called - * by bpf programs of types BPF_PROG_TYPE_LWT_IN and - * BPF_PROG_TYPE_LWT_XMIT. - * - * A call to this helper is susceptible to change the underlaying + * additional headers, up to **LWT_BPF_MAX_HEADROOM** + * total bytes in all prepended headers. Please note that + * if **skb_is_gso**\ (*skb*) is true, no more than two + * headers can be prepended, and the inner header, if + * present, should be either GRE or UDP/GUE. + * + * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs + * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can + * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and + * **BPF_PROG_TYPE_LWT_XMIT**. + * + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2035,7 +2087,7 @@ union bpf_attr { * inside the outermost IPv6 Segment Routing Header can be * modified through this helper. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2051,7 +2103,7 @@ union bpf_attr { * after the segments are accepted. *delta* can be as well * positive (growing) as negative (shrinking). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2074,13 +2126,13 @@ union bpf_attr { * Type of *param*: **int**. * **SEG6_LOCAL_ACTION_END_B6** * End.B6 action: Endpoint bound to an SRv6 policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * **SEG6_LOCAL_ACTION_END_B6_ENCAP** * End.B6.Encap action: Endpoint bound to an SRv6 * encapsulation policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2233,7 +2285,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) * Description @@ -2269,7 +2322,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * int bpf_sk_release(struct bpf_sock *sock) * Description @@ -2431,6 +2485,193 @@ union bpf_attr { * Return * A **struct bpf_sock** pointer on success, or **NULL** in * case of failure. + * + * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * This function is identical to **bpf_sk_lookup_tcp**\ (), except + * that it also returns timewait or request sockets. Use + * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the + * full structure. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * int bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK for + * the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ip6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains **sizeof**\ (**struct tcphdr**). + * + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative + * error otherwise. + * + * int bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) + * Description + * Get name of sysctl in /proc/sys/ and copy it into provided by + * program buffer *buf* of size *buf_len*. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * + * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is + * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name + * only (e.g. "tcp_mem"). + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * int bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get current value of sysctl as it is presented in /proc/sys + * (incl. newline, etc), and copy it as a string into provided + * by program buffer *buf* of size *buf_len*. + * + * The whole value is copied, no matter what file position user + * space issued e.g. sys_read at. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if current value was unavailable, e.g. because + * sysctl is uninitialized and read returns -EIO for it. + * + * int bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get new value being written by user space to sysctl (before + * the actual write happens) and copy it as a string into + * provided by program buffer *buf* of size *buf_len*. + * + * User space may write new value at file position > 0. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if sysctl is being read. + * + * int bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) + * Description + * Override new value being written by user space to sysctl with + * value provided by program in buffer *buf* of size *buf_len*. + * + * *buf* should contain a string in same form as provided by user + * space on sysctl write. + * + * User space may write new value at file position > 0. To override + * the whole sysctl value file position should be set to zero. + * Return + * 0 on success. + * + * **-E2BIG** if the *buf_len* is too big. + * + * **-EINVAL** if sysctl is being read. + * + * int bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to a long integer according to the given base + * and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)) followed by a single + * optional '**-**' sign. + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtol**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * int bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to an unsigned long integer according to the + * given base and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)). + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtoul**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * void *bpf_sk_storage_get(struct bpf_map *map, struct bpf_sock *sk, void *value, u64 flags) + * Description + * Get a bpf-local-storage from a *sk*. + * + * Logically, it could be thought of getting the value from + * a *map* with *sk* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this + * helper enforces the key must be a full socket and the map must + * be a **BPF_MAP_TYPE_SK_STORAGE** also. + * + * Underneath, the value is stored locally at *sk* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf-local-storages residing at *sk*. + * + * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf-local-storage will be + * created if one does not exist. *value* can be used + * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf-local-storage. If *value* is + * **NULL**, the new bpf-local-storage will be zero initialized. + * Return + * A bpf-local-storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf-local-storage. + * + * int bpf_sk_storage_delete(struct bpf_map *map, struct bpf_sock *sk) + * Description + * Delete a bpf-local-storage from a *sk*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf-local-storage cannot be found. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2531,7 +2772,17 @@ union bpf_attr { FN(sk_fullsock), \ FN(tcp_sock), \ FN(skb_ecn_set_ce), \ - FN(get_listener_sock), + FN(get_listener_sock), \ + FN(skc_lookup_tcp), \ + FN(tcp_check_syncookie), \ + FN(sysctl_get_name), \ + FN(sysctl_get_current_value), \ + FN(sysctl_get_new_value), \ + FN(sysctl_set_new_value), \ + FN(strtol), \ + FN(strtoul), \ + FN(sk_storage_get), \ + FN(sk_storage_delete), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2590,9 +2841,30 @@ enum bpf_func_id { /* Current network namespace */ #define BPF_F_CURRENT_NETNS (-1L) +/* BPF_FUNC_skb_adjust_room flags. */ +#define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0) + +#define BPF_ADJ_ROOM_ENCAP_L2_MASK 0xff +#define BPF_ADJ_ROOM_ENCAP_L2_SHIFT 56 + +#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1) +#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2) +#define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3) +#define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4) +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) + +/* BPF_FUNC_sysctl_get_name flags. */ +#define BPF_F_SYSCTL_BASE_NAME (1ULL << 0) + +/* BPF_FUNC_sk_storage_get flags */ +#define BPF_SK_STORAGE_GET_F_CREATE (1ULL << 0) + /* Mode for BPF_FUNC_skb_adjust_room helper. */ enum bpf_adj_room_mode { BPF_ADJ_ROOM_NET, + BPF_ADJ_ROOM_MAC, }; /* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ @@ -3218,4 +3490,14 @@ struct bpf_line_info { struct bpf_spin_lock { __u32 val; }; + +struct bpf_sysctl { + __u32 write; /* Sysctl is being read (= 0) or written (= 1). + * Allows 1,2,4-byte read, but no write. + */ + __u32 file_pos; /* Sysctl file position to read from, write to. + * Allows 1,2,4-byte read an 4-byte write. + */ +}; + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index 7b7475ef2f17..9310652ca4f9 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -39,11 +39,11 @@ struct btf_type { * struct, union and fwd */ __u32 info; - /* "size" is used by INT, ENUM, STRUCT and UNION. + /* "size" is used by INT, ENUM, STRUCT, UNION and DATASEC. * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, - * FUNC and FUNC_PROTO. + * FUNC, FUNC_PROTO and VAR. * "type" is a type_id referring to another type. */ union { @@ -70,8 +70,10 @@ struct btf_type { #define BTF_KIND_RESTRICT 11 /* Restrict */ #define BTF_KIND_FUNC 12 /* Function */ #define BTF_KIND_FUNC_PROTO 13 /* Function Proto */ -#define BTF_KIND_MAX 13 -#define NR_BTF_KINDS 14 +#define BTF_KIND_VAR 14 /* Variable */ +#define BTF_KIND_DATASEC 15 /* Section */ +#define BTF_KIND_MAX BTF_KIND_DATASEC +#define NR_BTF_KINDS (BTF_KIND_MAX + 1) /* For some specific BTF_KIND, "struct btf_type" is immediately * followed by extra data. @@ -138,4 +140,26 @@ struct btf_param { __u32 type; }; +enum { + BTF_VAR_STATIC = 0, + BTF_VAR_GLOBAL_ALLOCATED, +}; + +/* BTF_KIND_VAR is followed by a single "struct btf_var" to describe + * additional information related to the variable such as its linkage. + */ +struct btf_var { + __u32 linkage; +}; + +/* BTF_KIND_DATASEC is followed by multiple "struct btf_var_secinfo" + * to describe all BTF_KIND_VAR types it contains along with it's + * in-section offset as well as size. + */ +struct btf_var_secinfo { + __u32 type; + __u32 offset; + __u32 size; +}; + #endif /* _UAPI__LINUX_BTF_H__ */ diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h index e974f4bb5378..421239b98db2 100644 --- a/include/uapi/linux/btrfs_tree.h +++ b/include/uapi/linux/btrfs_tree.h @@ -307,6 +307,8 @@ * * Used by: * struct btrfs_dir_item.type + * + * Values 0..7 must match common file type values in fs_types.h. */ #define BTRFS_FT_UNKNOWN 0 #define BTRFS_FT_REG_FILE 1 diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h index 0c3000faedba..f47e853546fa 100644 --- a/include/uapi/linux/elf-em.h +++ b/include/uapi/linux/elf-em.h @@ -34,14 +34,20 @@ #define EM_M32R 88 /* Renesas M32R */ #define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */ #define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ +#define EM_ARCOMPACT 93 /* ARCompact processor */ #define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ #define EM_BLACKFIN 106 /* ADI Blackfin Processor */ +#define EM_UNICORE 110 /* UniCore-32 */ #define EM_ALTERA_NIOS2 113 /* Altera Nios II soft-core processor */ #define EM_TI_C6000 140 /* TI C6X DSPs */ +#define EM_HEXAGON 164 /* QUALCOMM Hexagon */ +#define EM_NDS32 167 /* Andes Technology compact code size + embedded RISC processor family */ #define EM_AARCH64 183 /* ARM 64 bit */ #define EM_TILEPRO 188 /* Tilera TILEPro */ #define EM_MICROBLAZE 189 /* Xilinx MicroBlaze */ #define EM_TILEGX 191 /* Tilera TILE-Gx */ +#define EM_ARCV2 195 /* ARCv2 Cores */ #define EM_RISCV 243 /* RISC-V */ #define EM_BPF 247 /* Linux BPF - in-kernel virtual machine */ #define EM_CSKY 252 /* C-SKY */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index d473e5ed044c..3534ce157ae9 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -252,9 +252,17 @@ struct ethtool_tunable { #define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff #define DOWNSHIFT_DEV_DISABLE 0 +/* Time in msecs after which link is reported as down + * 0 = lowest time supported by the PHY + * 0xff = off, link down detection according to standard + */ +#define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0 +#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff + enum phy_tunable_id { ETHTOOL_PHY_ID_UNSPEC, ETHTOOL_PHY_DOWNSHIFT, + ETHTOOL_PHY_FAST_LINK_DOWN, /* * Add your fresh new phy tunable attribute above and remember to update * phy_tunable_strings[] in net/core/ethtool.c @@ -1704,6 +1712,9 @@ static inline int ethtool_validate_duplex(__u8 duplex) #define ETH_MODULE_SFF_8436 0x4 #define ETH_MODULE_SFF_8436_LEN 256 +#define ETH_MODULE_SFF_8636_MAX_LEN 640 +#define ETH_MODULE_SFF_8436_MAX_LEN 640 + /* Reset flags */ /* The reset() operation must clear the flags for the components which * were actually reset. On successful return, the flags indicate the diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index a2f8658f1c55..1d338357df8a 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -91,5 +91,7 @@ #define AT_STATX_FORCE_SYNC 0x2000 /* - Force the attributes to be sync'd with the server */ #define AT_STATX_DONT_SYNC 0x4000 /* - Don't sync attributes with the server */ +#define AT_RECURSIVE 0x8000 /* Apply to the entire subtree */ + #endif /* _UAPI_LINUX_FCNTL_H */ diff --git a/include/uapi/linux/fou.h b/include/uapi/linux/fou.h index f2ea833a2812..87c2c9f08803 100644 --- a/include/uapi/linux/fou.h +++ b/include/uapi/linux/fou.h @@ -16,6 +16,12 @@ enum { FOU_ATTR_IPPROTO, /* u8 */ FOU_ATTR_TYPE, /* u8 */ FOU_ATTR_REMCSUM_NOPARTIAL, /* flag */ + FOU_ATTR_LOCAL_V4, /* u32 */ + FOU_ATTR_LOCAL_V6, /* in6_addr */ + FOU_ATTR_PEER_V4, /* u32 */ + FOU_ATTR_PEER_V6, /* in6_addr */ + FOU_ATTR_PEER_PORT, /* u16 */ + FOU_ATTR_IFINDEX, /* s32 */ __FOU_ATTR_MAX, }; diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 121e82ce296b..59c71fa8c553 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -320,6 +320,9 @@ struct fscrypt_key { #define SYNC_FILE_RANGE_WAIT_BEFORE 1 #define SYNC_FILE_RANGE_WRITE 2 #define SYNC_FILE_RANGE_WAIT_AFTER 4 +#define SYNC_FILE_RANGE_WRITE_AND_WAIT (SYNC_FILE_RANGE_WRITE | \ + SYNC_FILE_RANGE_WAIT_BEFORE | \ + SYNC_FILE_RANGE_WAIT_AFTER) /* * Flags for preadv2/pwritev2: diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index 2ac598614a8f..19fb55e3c73e 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -44,6 +44,7 @@ * - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in * - add blksize field to fuse_attr * - add file flags field to fuse_read_in and fuse_write_in + * - Add ATIME_NOW and MTIME_NOW flags to fuse_setattr_in * * 7.10 * - add nonseekable open flag @@ -54,7 +55,7 @@ * - add POLL message and NOTIFY_POLL notification * * 7.12 - * - add umask flag to input argument of open, mknod and mkdir + * - add umask flag to input argument of create, mknod and mkdir * - add notification messages for invalidation of inodes and * directory entries * @@ -125,6 +126,10 @@ * * 7.29 * - add FUSE_NO_OPENDIR_SUPPORT flag + * + * 7.30 + * - add FUSE_EXPLICIT_INVAL_DATA + * - add FUSE_IOCTL_COMPAT_X32 */ #ifndef _LINUX_FUSE_H @@ -160,7 +165,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 29 +#define FUSE_KERNEL_MINOR_VERSION 30 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -229,11 +234,13 @@ struct fuse_file_lock { * FOPEN_KEEP_CACHE: don't invalidate the data cache on open * FOPEN_NONSEEKABLE: the file is not seekable * FOPEN_CACHE_DIR: allow caching this directory + * FOPEN_STREAM: the file is stream-like (no file position at all) */ #define FOPEN_DIRECT_IO (1 << 0) #define FOPEN_KEEP_CACHE (1 << 1) #define FOPEN_NONSEEKABLE (1 << 2) #define FOPEN_CACHE_DIR (1 << 3) +#define FOPEN_STREAM (1 << 4) /** * INIT request/reply flags @@ -263,6 +270,7 @@ struct fuse_file_lock { * FUSE_MAX_PAGES: init_out.max_pages contains the max number of req pages * FUSE_CACHE_SYMLINKS: cache READLINK responses * FUSE_NO_OPENDIR_SUPPORT: kernel supports zero-message opendir + * FUSE_EXPLICIT_INVAL_DATA: only invalidate cached pages on explicit request */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -289,6 +297,7 @@ struct fuse_file_lock { #define FUSE_MAX_PAGES (1 << 22) #define FUSE_CACHE_SYMLINKS (1 << 23) #define FUSE_NO_OPENDIR_SUPPORT (1 << 24) +#define FUSE_EXPLICIT_INVAL_DATA (1 << 25) /** * CUSE INIT request/reply flags @@ -335,6 +344,7 @@ struct fuse_file_lock { * FUSE_IOCTL_RETRY: retry with new iovecs * FUSE_IOCTL_32BIT: 32bit ioctl * FUSE_IOCTL_DIR: is a directory + * FUSE_IOCTL_COMPAT_X32: x32 compat ioctl on 64bit machine (64bit time_t) * * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs */ @@ -343,6 +353,7 @@ struct fuse_file_lock { #define FUSE_IOCTL_RETRY (1 << 2) #define FUSE_IOCTL_32BIT (1 << 3) #define FUSE_IOCTL_DIR (1 << 4) +#define FUSE_IOCTL_COMPAT_X32 (1 << 5) #define FUSE_IOCTL_MAX_IOV 256 @@ -353,6 +364,13 @@ struct fuse_file_lock { */ #define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0) +/** + * Fsync flags + * + * FUSE_FSYNC_FDATASYNC: Sync data only, not metadata + */ +#define FUSE_FSYNC_FDATASYNC (1 << 0) + enum fuse_opcode { FUSE_LOOKUP = 1, FUSE_FORGET = 2, /* no reply */ diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h index 325395f56bfa..2622b5a3e616 100644 --- a/include/uapi/linux/icmpv6.h +++ b/include/uapi/linux/icmpv6.h @@ -90,6 +90,8 @@ struct icmp6hdr { #define ICMPV6_TIME_EXCEED 3 #define ICMPV6_PARAMPROB 4 +#define ICMPV6_ERRMSG_MAX 127 + #define ICMPV6_INFOMSG_MASK 0x80 #define ICMPV6_ECHO_REQUEST 128 @@ -110,6 +112,8 @@ struct icmp6hdr { #define ICMPV6_MRDISC_ADV 151 +#define ICMPV6_MSG_MAX 255 + /* * Codes for Destination Unreachable */ diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 3a45b4ad71a3..3158ba672b72 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -109,6 +109,7 @@ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DSA_8021Q 0xDADB /* Fake VLAN Header for DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h index 23a6753b37df..454ae31b93c7 100644 --- a/include/uapi/linux/if_tun.h +++ b/include/uapi/linux/if_tun.h @@ -60,6 +60,7 @@ #define TUNSETSTEERINGEBPF _IOR('T', 224, int) #define TUNSETFILTEREBPF _IOR('T', 225, int) #define TUNSETCARRIER _IOW('T', 226, int) +#define TUNGETDEVNETNS _IO('T', 227) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h index 7a0e8bd65b6b..90a2c89afc8f 100644 --- a/include/uapi/linux/if_vlan.h +++ b/include/uapi/linux/if_vlan.h @@ -32,10 +32,11 @@ enum vlan_ioctl_cmds { }; enum vlan_flags { - VLAN_FLAG_REORDER_HDR = 0x1, - VLAN_FLAG_GVRP = 0x2, - VLAN_FLAG_LOOSE_BINDING = 0x4, - VLAN_FLAG_MVRP = 0x8, + VLAN_FLAG_REORDER_HDR = 0x1, + VLAN_FLAG_GVRP = 0x2, + VLAN_FLAG_LOOSE_BINDING = 0x4, + VLAN_FLAG_MVRP = 0x8, + VLAN_FLAG_BRIDGE_BINDING = 0x10, }; enum vlan_name_types { diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 7f14d4a66c28..85387c76c24f 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -439,10 +439,12 @@ #define KEY_TITLE 0x171 #define KEY_SUBTITLE 0x172 #define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 +#define KEY_FULL_SCREEN 0x174 /* AC View Toggle */ +#define KEY_ZOOM KEY_FULL_SCREEN #define KEY_MODE 0x175 #define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 +#define KEY_ASPECT_RATIO 0x177 /* HUTRR37: Aspect */ +#define KEY_SCREEN KEY_ASPECT_RATIO #define KEY_PC 0x178 /* Media Select Computer */ #define KEY_TV 0x179 /* Media Select TV */ #define KEY_TV2 0x17a /* Media Select Cable */ @@ -604,6 +606,7 @@ #define KEY_SCREENSAVER 0x245 /* AL Screen Saver */ #define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ #define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */ +#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index e23408692118..a0c460025036 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -26,6 +26,7 @@ struct io_uring_sqe { __kernel_rwf_t rw_flags; __u32 fsync_flags; __u16 poll_events; + __u32 sync_range_flags; }; __u64 user_data; /* data to be passed back at completion time */ union { @@ -38,6 +39,7 @@ struct io_uring_sqe { * sqe->flags */ #define IOSQE_FIXED_FILE (1U << 0) /* use fixed fileset */ +#define IOSQE_IO_DRAIN (1U << 1) /* issue after inflight IO */ /* * io_uring_setup() flags @@ -54,6 +56,7 @@ struct io_uring_sqe { #define IORING_OP_WRITE_FIXED 5 #define IORING_OP_POLL_ADD 6 #define IORING_OP_POLL_REMOVE 7 +#define IORING_OP_SYNC_FILE_RANGE 8 /* * sqe->fsync_flags @@ -133,5 +136,7 @@ struct io_uring_params { #define IORING_UNREGISTER_BUFFERS 1 #define IORING_REGISTER_FILES 2 #define IORING_UNREGISTER_FILES 3 +#define IORING_REGISTER_EVENTFD 4 +#define IORING_UNREGISTER_EVENTFD 5 #endif diff --git a/include/uapi/linux/ip_vs.h b/include/uapi/linux/ip_vs.h index 1c916b2f89dc..e34f436fc79d 100644 --- a/include/uapi/linux/ip_vs.h +++ b/include/uapi/linux/ip_vs.h @@ -124,6 +124,13 @@ #define IP_VS_PEDATA_MAXLEN 255 +/* Tunnel types */ +enum { + IP_VS_CONN_F_TUNNEL_TYPE_IPIP = 0, /* IPIP */ + IP_VS_CONN_F_TUNNEL_TYPE_GUE, /* GUE */ + IP_VS_CONN_F_TUNNEL_TYPE_MAX, +}; + /* * The struct ip_vs_service_user and struct ip_vs_dest_user are * used to set IPVS rules through setsockopt. @@ -392,6 +399,10 @@ enum { IPVS_DEST_ATTR_STATS64, /* nested attribute for dest stats */ + IPVS_DEST_ATTR_TUN_TYPE, /* tunnel type */ + + IPVS_DEST_ATTR_TUN_PORT, /* tunnel port */ + __IPVS_DEST_ATTR_MAX, }; diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 6d4ea4b6c922..2fe12b40d503 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -986,8 +986,13 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_HYPERV_ENLIGHTENED_VMCS 163 #define KVM_CAP_EXCEPTION_PAYLOAD 164 #define KVM_CAP_ARM_VM_IPA_SIZE 165 -#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT 166 +#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT 166 /* Obsolete */ #define KVM_CAP_HYPERV_CPUID 167 +#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 168 +#define KVM_CAP_PPC_IRQ_XIVE 169 +#define KVM_CAP_ARM_SVE 170 +#define KVM_CAP_ARM_PTRAUTH_ADDRESS 171 +#define KVM_CAP_ARM_PTRAUTH_GENERIC 172 #ifdef KVM_CAP_IRQ_ROUTING @@ -1145,6 +1150,7 @@ struct kvm_dirty_tlb { #define KVM_REG_SIZE_U256 0x0050000000000000ULL #define KVM_REG_SIZE_U512 0x0060000000000000ULL #define KVM_REG_SIZE_U1024 0x0070000000000000ULL +#define KVM_REG_SIZE_U2048 0x0080000000000000ULL struct kvm_reg_list { __u64 n; /* number of regs */ @@ -1211,6 +1217,8 @@ enum kvm_device_type { #define KVM_DEV_TYPE_ARM_VGIC_V3 KVM_DEV_TYPE_ARM_VGIC_V3 KVM_DEV_TYPE_ARM_VGIC_ITS, #define KVM_DEV_TYPE_ARM_VGIC_ITS KVM_DEV_TYPE_ARM_VGIC_ITS + KVM_DEV_TYPE_XIVE, +#define KVM_DEV_TYPE_XIVE KVM_DEV_TYPE_XIVE KVM_DEV_TYPE_MAX, }; @@ -1434,12 +1442,15 @@ struct kvm_enc_region { #define KVM_GET_NESTED_STATE _IOWR(KVMIO, 0xbe, struct kvm_nested_state) #define KVM_SET_NESTED_STATE _IOW(KVMIO, 0xbf, struct kvm_nested_state) -/* Available with KVM_CAP_MANUAL_DIRTY_LOG_PROTECT */ +/* Available with KVM_CAP_MANUAL_DIRTY_LOG_PROTECT_2 */ #define KVM_CLEAR_DIRTY_LOG _IOWR(KVMIO, 0xc0, struct kvm_clear_dirty_log) /* Available with KVM_CAP_HYPERV_CPUID */ #define KVM_GET_SUPPORTED_HV_CPUID _IOWR(KVMIO, 0xc1, struct kvm_cpuid2) +/* Available with KVM_CAP_ARM_SVE */ +#define KVM_ARM_VCPU_FINALIZE _IOW(KVMIO, 0xc2, int) + /* Secure Encrypted Virtualization command */ enum sev_cmd_id { /* Guest initialization commands */ diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h index 45fcbf99d72e..f99d9dcae667 100644 --- a/include/uapi/linux/lirc.h +++ b/include/uapi/linux/lirc.h @@ -195,6 +195,7 @@ struct lirc_scancode { * @RC_PROTO_RCMM12: RC-MM protocol 12 bits * @RC_PROTO_RCMM24: RC-MM protocol 24 bits * @RC_PROTO_RCMM32: RC-MM protocol 32 bits + * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol */ enum rc_proto { RC_PROTO_UNKNOWN = 0, @@ -224,6 +225,7 @@ enum rc_proto { RC_PROTO_RCMM12 = 24, RC_PROTO_RCMM24 = 25, RC_PROTO_RCMM32 = 26, + RC_PROTO_XBOX_DVD = 27, }; #endif diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h index d6a5a3bfe6c4..2a6b253cfb05 100644 --- a/include/uapi/linux/media-bus-format.h +++ b/include/uapi/linux/media-bus-format.h @@ -34,7 +34,7 @@ #define MEDIA_BUS_FMT_FIXED 0x0001 -/* RGB - next is 0x101b */ +/* RGB - next is 0x101c */ #define MEDIA_BUS_FMT_RGB444_1X12 0x1016 #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001 #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE 0x1002 @@ -50,6 +50,7 @@ #define MEDIA_BUS_FMT_RGB666_1X24_CPADHI 0x1015 #define MEDIA_BUS_FMT_RGB666_1X7X3_SPWG 0x1010 #define MEDIA_BUS_FMT_BGR888_1X24 0x1013 +#define MEDIA_BUS_FMT_BGR888_3X8 0x101b #define MEDIA_BUS_FMT_GBR888_1X24 0x1014 #define MEDIA_BUS_FMT_RGB888_1X24 0x100a #define MEDIA_BUS_FMT_RGB888_2X12_BE 0x100b diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index e5d0c5c611b5..9aedb187bc48 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -262,6 +262,11 @@ struct media_links_enum { #define MEDIA_INTF_T_V4L_SWRADIO (MEDIA_INTF_T_V4L_BASE + 4) #define MEDIA_INTF_T_V4L_TOUCH (MEDIA_INTF_T_V4L_BASE + 5) +#define MEDIA_INTF_T_ALSA_BASE 0x00000300 +#define MEDIA_INTF_T_ALSA_PCM_CAPTURE (MEDIA_INTF_T_ALSA_BASE) +#define MEDIA_INTF_T_ALSA_PCM_PLAYBACK (MEDIA_INTF_T_ALSA_BASE + 1) +#define MEDIA_INTF_T_ALSA_CONTROL (MEDIA_INTF_T_ALSA_BASE + 2) + #if defined(__KERNEL__) /* @@ -413,19 +418,19 @@ struct media_v2_topology { #define MEDIA_ENT_F_DTV_DECODER MEDIA_ENT_F_DV_DECODER /* - * There is still no ALSA support in the media controller. These + * There is still no full ALSA support in the media controller. These * defines should not have been added and we leave them here only * in case some application tries to use these defines. + * + * The ALSA defines that are in use have been moved into __KERNEL__ + * scope. As support gets added to these interface types, they should + * be moved into __KERNEL__ scope with the code that uses them. */ -#define MEDIA_INTF_T_ALSA_BASE 0x00000300 -#define MEDIA_INTF_T_ALSA_PCM_CAPTURE (MEDIA_INTF_T_ALSA_BASE) -#define MEDIA_INTF_T_ALSA_PCM_PLAYBACK (MEDIA_INTF_T_ALSA_BASE + 1) -#define MEDIA_INTF_T_ALSA_CONTROL (MEDIA_INTF_T_ALSA_BASE + 2) -#define MEDIA_INTF_T_ALSA_COMPRESS (MEDIA_INTF_T_ALSA_BASE + 3) -#define MEDIA_INTF_T_ALSA_RAWMIDI (MEDIA_INTF_T_ALSA_BASE + 4) -#define MEDIA_INTF_T_ALSA_HWDEP (MEDIA_INTF_T_ALSA_BASE + 5) -#define MEDIA_INTF_T_ALSA_SEQUENCER (MEDIA_INTF_T_ALSA_BASE + 6) -#define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) +#define MEDIA_INTF_T_ALSA_COMPRESS (MEDIA_INTF_T_ALSA_BASE + 3) +#define MEDIA_INTF_T_ALSA_RAWMIDI (MEDIA_INTF_T_ALSA_BASE + 4) +#define MEDIA_INTF_T_ALSA_HWDEP (MEDIA_INTF_T_ALSA_BASE + 5) +#define MEDIA_INTF_T_ALSA_SEQUENCER (MEDIA_INTF_T_ALSA_BASE + 6) +#define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) /* Obsolete symbol for media_version, no longer used in the kernel */ #define MEDIA_API_VERSION ((0 << 16) | (1 << 8) | 0) diff --git a/include/uapi/linux/mei.h b/include/uapi/linux/mei.h index 0f681cbd38d3..c6aec86cc5de 100644 --- a/include/uapi/linux/mei.h +++ b/include/uapi/linux/mei.h @@ -1,70 +1,9 @@ /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ -/****************************************************************************** +/* + * Copyright(c) 2003-2015 Intel Corporation. All rights reserved. * Intel Management Engine Interface (Intel MEI) Linux driver * Intel MEI Interface Header - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Corporation. - * linux-mei@linux.intel.com - * http://www.intel.com - * - * BSD LICENSE - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ - + */ #ifndef _LINUX_MEI_H #define _LINUX_MEI_H diff --git a/include/uapi/linux/mount.h b/include/uapi/linux/mount.h index 3f9ec42510b0..96a0240f23fe 100644 --- a/include/uapi/linux/mount.h +++ b/include/uapi/linux/mount.h @@ -55,4 +55,66 @@ #define MS_MGC_VAL 0xC0ED0000 #define MS_MGC_MSK 0xffff0000 +/* + * open_tree() flags. + */ +#define OPEN_TREE_CLONE 1 /* Clone the target tree and attach the clone */ +#define OPEN_TREE_CLOEXEC O_CLOEXEC /* Close the file on execve() */ + +/* + * move_mount() flags. + */ +#define MOVE_MOUNT_F_SYMLINKS 0x00000001 /* Follow symlinks on from path */ +#define MOVE_MOUNT_F_AUTOMOUNTS 0x00000002 /* Follow automounts on from path */ +#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 /* Empty from path permitted */ +#define MOVE_MOUNT_T_SYMLINKS 0x00000010 /* Follow symlinks on to path */ +#define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */ +#define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */ +#define MOVE_MOUNT__MASK 0x00000077 + +/* + * fsopen() flags. + */ +#define FSOPEN_CLOEXEC 0x00000001 + +/* + * fspick() flags. + */ +#define FSPICK_CLOEXEC 0x00000001 +#define FSPICK_SYMLINK_NOFOLLOW 0x00000002 +#define FSPICK_NO_AUTOMOUNT 0x00000004 +#define FSPICK_EMPTY_PATH 0x00000008 + +/* + * The type of fsconfig() call made. + */ +enum fsconfig_command { + FSCONFIG_SET_FLAG = 0, /* Set parameter, supplying no value */ + FSCONFIG_SET_STRING = 1, /* Set parameter, supplying a string value */ + FSCONFIG_SET_BINARY = 2, /* Set parameter, supplying a binary blob value */ + FSCONFIG_SET_PATH = 3, /* Set parameter, supplying an object by path */ + FSCONFIG_SET_PATH_EMPTY = 4, /* Set parameter, supplying an object by (empty) path */ + FSCONFIG_SET_FD = 5, /* Set parameter, supplying an object by fd */ + FSCONFIG_CMD_CREATE = 6, /* Invoke superblock creation */ + FSCONFIG_CMD_RECONFIGURE = 7, /* Invoke superblock reconfiguration */ +}; + +/* + * fsmount() flags. + */ +#define FSMOUNT_CLOEXEC 0x00000001 + +/* + * Mount attributes. + */ +#define MOUNT_ATTR_RDONLY 0x00000001 /* Mount read-only */ +#define MOUNT_ATTR_NOSUID 0x00000002 /* Ignore suid and sgid bits */ +#define MOUNT_ATTR_NODEV 0x00000004 /* Disallow access to device special files */ +#define MOUNT_ATTR_NOEXEC 0x00000008 /* Disallow program execution */ +#define MOUNT_ATTR__ATIME 0x00000070 /* Setting on how atime should be updated */ +#define MOUNT_ATTR_RELATIME 0x00000000 /* - Update atime relative to mtime/ctime. */ +#define MOUNT_ATTR_NOATIME 0x00000010 /* - Do not update access times. */ +#define MOUNT_ATTR_STRICTATIME 0x00000020 /* - Always perform atime updates */ +#define MOUNT_ATTR_NODIRATIME 0x00000080 /* Do not update directory access times */ + #endif /* _UAPI_LINUX_MOUNT_H */ diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index a66c8de006cc..505393c6e959 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -966,7 +966,7 @@ enum nft_socket_keys { * @NFT_CT_DST_IP: conntrack layer 3 protocol destination (IPv4 address) * @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address) * @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address) - * @NFT_CT_TIMEOUT: connection tracking timeout policy assigned to conntrack + * @NFT_CT_ID: conntrack id */ enum nft_ct_keys { NFT_CT_STATE, @@ -992,7 +992,7 @@ enum nft_ct_keys { NFT_CT_DST_IP, NFT_CT_SRC_IP6, NFT_CT_DST_IP6, - NFT_CT_TIMEOUT, + NFT_CT_ID, __NFT_CT_MAX }; #define NFT_CT_MAX (__NFT_CT_MAX - 1) @@ -1136,7 +1136,7 @@ enum nft_log_level { NFT_LOGLEVEL_AUDIT, __NFT_LOGLEVEL_MAX }; -#define NFT_LOGLEVEL_MAX (__NFT_LOGLEVEL_MAX + 1) +#define NFT_LOGLEVEL_MAX (__NFT_LOGLEVEL_MAX - 1) /** * enum nft_queue_attributes - nf_tables queue expression netlink attributes @@ -1522,15 +1522,21 @@ enum nft_flowtable_hook_attributes { * * @NFTA_OSF_DREG: destination register (NLA_U32: nft_registers) * @NFTA_OSF_TTL: Value of the TTL osf option (NLA_U8) + * @NFTA_OSF_FLAGS: flags (NLA_U32) */ enum nft_osf_attributes { NFTA_OSF_UNSPEC, NFTA_OSF_DREG, NFTA_OSF_TTL, + NFTA_OSF_FLAGS, __NFTA_OSF_MAX, }; #define NFTA_OSF_MAX (__NFTA_OSF_MAX - 1) +enum nft_osf_flags { + NFT_OSF_F_VERSION = (1 << 0), +}; + /** * enum nft_device_attributes - nf_tables device netlink attributes * diff --git a/include/uapi/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h index e44e00616ab5..e3bcfc6aa3b0 100644 --- a/include/uapi/linux/nfs_mount.h +++ b/include/uapi/linux/nfs_mount.h @@ -66,13 +66,4 @@ struct nfs_mount_data { #define NFS_MOUNT_UNSHARED 0x8000 /* 5 */ #define NFS_MOUNT_FLAGMASK 0xFFFF -/* The following are for internal use only */ -#define NFS_MOUNT_LOOKUP_CACHE_NONEG 0x10000 -#define NFS_MOUNT_LOOKUP_CACHE_NONE 0x20000 -#define NFS_MOUNT_NORESVPORT 0x40000 -#define NFS_MOUNT_LEGACY_INTERFACE 0x80000 - -#define NFS_MOUNT_LOCAL_FLOCK 0x100000 -#define NFS_MOUNT_LOCAL_FCNTL 0x200000 - #endif diff --git a/include/uapi/linux/nfsd/cld.h b/include/uapi/linux/nfsd/cld.h index f8f5cccad749..b1e9de4f07d5 100644 --- a/include/uapi/linux/nfsd/cld.h +++ b/include/uapi/linux/nfsd/cld.h @@ -36,6 +36,7 @@ enum cld_command { Cld_Remove, /* remove record of this cm_id */ Cld_Check, /* is this cm_id allowed? */ Cld_GraceDone, /* grace period is complete */ + Cld_GraceStart, }; /* representation of long-form NFSv4 client ID */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index dd4f86ee286e..6f09d1500960 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018 Intel Corporation + * Copyright (C) 2018-2019 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -1065,6 +1065,26 @@ * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes * determining the width and type. * + * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to + * offload OWE processing to user space. This intends to support + * OWE AKM by the host drivers that implement SME but rely + * on the user space for the cryptographic/DH IE processing in AP mode. + * + * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric + * refreshing, is that from one mesh point we be able to send some data + * frames to other mesh points which are not currently selected as a + * primary traffic path, but which are only 1 hop away. The absence of + * the primary path to the chosen node makes it necessary to apply some + * form of marking on a chosen packet stream so that the packets can be + * properly steered to the selected node for testing, and not by the + * regular mesh path lookup. Further, the packets must be of type data + * so that the rate control (often embedded in firmware) is used for + * rate selection. + * + * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh + * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame + * content. The frame is ethernet data. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1285,6 +1305,10 @@ enum nl80211_commands { NL80211_CMD_NOTIFY_RADAR, + NL80211_CMD_UPDATE_OWE_INFO, + + NL80211_CMD_PROBE_MESH_LINK, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2308,6 +2332,15 @@ enum nl80211_commands { * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime * scheduler. * + * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for + * station associated with the AP. See &enum nl80211_tx_power_setting for + * possible values. + * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This + * allows to set Tx power for a station. If this attribute is not included, + * the default per-interface tx power setting will be overriding. Driver + * should be picking up the lowest tx power, either tx power per-interface + * or per-station. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2758,6 +2791,8 @@ enum nl80211_attrs { NL80211_ATTR_PEER_MEASUREMENTS, NL80211_ATTR_AIRTIME_WEIGHT, + NL80211_ATTR_STA_TX_POWER_SETTING, + NL80211_ATTR_STA_TX_POWER, /* add attributes here, update the policy in nl80211.c */ @@ -2802,7 +2837,7 @@ enum nl80211_attrs { #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_HT_RATES 77 -#define NL80211_MAX_SUPP_REG_RULES 64 +#define NL80211_MAX_SUPP_REG_RULES 128 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 @@ -3139,6 +3174,7 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames * sent to the station (u64, usec) * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) + * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3184,6 +3220,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_CONNECTED_TO_GATE, NL80211_STA_INFO_TX_DURATION, NL80211_STA_INFO_AIRTIME_WEIGHT, + NL80211_STA_INFO_AIRTIME_LINK_METRIC, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -3638,6 +3675,14 @@ enum nl80211_reg_rule_attr { * value as specified by &struct nl80211_bss_select_rssi_adjust. * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching * (this cannot be used together with SSID). + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the + * band specific minimum rssi thresholds for the bands defined in + * enum nl80211_band. The minimum rssi threshold value(s32) specific to a + * band shall be encapsulated in attribute with type value equals to one + * of the NL80211_BAND_* defined in enum nl80211_band. For example, the + * minimum rssi threshold value for 2.4GHZ band shall be encapsulated + * within an attribute of type NL80211_BAND_2GHZ. And one or more of such + * attributes will be nested within this attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -3650,6 +3695,7 @@ enum nl80211_sched_scan_match_attr { NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -4135,6 +4181,27 @@ enum nl80211_channel_type { }; /** + * enum nl80211_key_mode - Key mode + * + * @NL80211_KEY_RX_TX: (Default) + * Key can be used for Rx and Tx immediately + * + * The following modes can only be selected for unicast keys and when the + * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: + * + * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: + * Unicast key can only be used for Rx, Tx not allowed, yet + * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: + * The unicast key identified by idx and mac is cleared for Tx and becomes + * the preferred Tx key for the station. + */ +enum nl80211_key_mode { + NL80211_KEY_RX_TX, + NL80211_KEY_NO_TX, + NL80211_KEY_SET_TX +}; + +/** * enum nl80211_chan_width - channel width definitions * * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH @@ -4377,6 +4444,9 @@ enum nl80211_key_default_types { * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. * See &enum nl80211_key_default_types. + * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. + * Defaults to @NL80211_KEY_RX_TX. + * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute */ @@ -4390,6 +4460,7 @@ enum nl80211_key_attributes { NL80211_KEY_DEFAULT_MGMT, NL80211_KEY_TYPE, NL80211_KEY_DEFAULT_TYPES, + NL80211_KEY_MODE, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -5335,6 +5406,8 @@ enum nl80211_feature_flags { * able to rekey an in-use key correctly. Userspace must not rekey PTK keys * if this flag is not set. Ignoring this can leak clear text packets and/or * freeze the connection. + * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for + * Individually Addressed Frames" from IEEE802.11-2016. * * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime * fairness for transmitted packets and has enabled airtime fairness @@ -5343,6 +5416,12 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching * (set/del PMKSA operations) in AP mode. * + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports + * filtering of sched scan results using band specific RSSI thresholds. + * + * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power + * to a station. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5384,6 +5463,9 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, NL80211_EXT_FEATURE_AP_PMKSA_CACHING, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, + NL80211_EXT_FEATURE_EXT_KEY_ID, + NL80211_EXT_FEATURE_STA_TX_PWR, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index dbe0cbe4f1b7..f271f1ec50ae 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -364,6 +364,7 @@ enum ovs_tunnel_key_attr { OVS_TUNNEL_KEY_ATTR_IPV6_DST, /* struct in6_addr dst IPv6 address. */ OVS_TUNNEL_KEY_ATTR_PAD, OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS, /* struct erspan_metadata */ + OVS_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE, /* No argument. IPV4_INFO_BRIDGE mode.*/ __OVS_TUNNEL_KEY_ATTR_MAX }; @@ -734,6 +735,7 @@ struct ovs_action_hash { * be received on NFNLGRP_CONNTRACK_NEW and NFNLGRP_CONNTRACK_DESTROY groups, * respectively. Remaining bits control the changes for which an event is * delivered on the NFNLGRP_CONNTRACK_UPDATE group. + * @OVS_CT_ATTR_TIMEOUT: Variable length string defining conntrack timeout. */ enum ovs_ct_attr { OVS_CT_ATTR_UNSPEC, @@ -746,6 +748,8 @@ enum ovs_ct_attr { OVS_CT_ATTR_NAT, /* Nested OVS_NAT_ATTR_* */ OVS_CT_ATTR_FORCE_COMMIT, /* No argument */ OVS_CT_ATTR_EVENTMASK, /* u32 mask of IPCT_* events. */ + OVS_CT_ATTR_TIMEOUT, /* Associate timeout with this connection for + * fine-grain timeout tuning. */ __OVS_CT_ATTR_MAX }; @@ -798,6 +802,44 @@ struct ovs_action_push_eth { struct ovs_key_ethernet addresses; }; +/* + * enum ovs_check_pkt_len_attr - Attributes for %OVS_ACTION_ATTR_CHECK_PKT_LEN. + * + * @OVS_CHECK_PKT_LEN_ATTR_PKT_LEN: u16 Packet length to check for. + * @OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER: Nested OVS_ACTION_ATTR_* + * actions to apply if the packer length is greater than the specified + * length in the attr - OVS_CHECK_PKT_LEN_ATTR_PKT_LEN. + * @OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL - Nested OVS_ACTION_ATTR_* + * actions to apply if the packer length is lesser or equal to the specified + * length in the attr - OVS_CHECK_PKT_LEN_ATTR_PKT_LEN. + */ +enum ovs_check_pkt_len_attr { + OVS_CHECK_PKT_LEN_ATTR_UNSPEC, + OVS_CHECK_PKT_LEN_ATTR_PKT_LEN, + OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER, + OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL, + __OVS_CHECK_PKT_LEN_ATTR_MAX, + +#ifdef __KERNEL__ + OVS_CHECK_PKT_LEN_ATTR_ARG /* struct check_pkt_len_arg */ +#endif +}; + +#define OVS_CHECK_PKT_LEN_ATTR_MAX (__OVS_CHECK_PKT_LEN_ATTR_MAX - 1) + +#ifdef __KERNEL__ +struct check_pkt_len_arg { + u16 pkt_len; /* Same value as OVS_CHECK_PKT_LEN_ATTR_PKT_LEN'. */ + bool exec_for_greater; /* When true, actions in IF_GREATER will + * not change flow keys. False otherwise. + */ + bool exec_for_lesser_equal; /* When true, actions in IF_LESS_EQUAL + * will not change flow keys. False + * otherwise. + */ +}; +#endif + /** * enum ovs_action_attr - Action types. * @@ -842,6 +884,9 @@ struct ovs_action_push_eth { * packet, or modify the packet (e.g., change the DSCP field). * @OVS_ACTION_ATTR_CLONE: make a copy of the packet and execute a list of * actions without affecting the original packet and key. + * @OVS_ACTION_ATTR_CHECK_PKT_LEN: Check the packet length and execute a set + * of actions if greater than the specified packet length, else execute + * another set of actions. * * Only a single header can be set with a single %OVS_ACTION_ATTR_SET. Not all * fields within a header are modifiable, e.g. the IPv4 protocol and fragment @@ -876,6 +921,7 @@ enum ovs_action_attr { OVS_ACTION_ATTR_POP_NSH, /* No argument. */ OVS_ACTION_ATTR_METER, /* u32 meter ID. */ OVS_ACTION_ATTR_CLONE, /* Nested OVS_CLONE_ATTR_*. */ + OVS_ACTION_ATTR_CHECK_PKT_LEN, /* Nested OVS_CHECK_PKT_LEN_ATTR_*. */ __OVS_ACTION_ATTR_MAX, /* Nothing past this will be accepted * from userspace. */ diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 5c98133f2c94..27164769d184 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* - * pci_regs.h - * * PCI standard defines * Copyright 1994, Drew Eckhardt * Copyright 1997--1999 Martin Mares <mj@ucw.cz> @@ -15,7 +13,7 @@ * PCI System Design Guide * * For HyperTransport information, please consult the following manuals - * from http://www.hypertransport.org + * from http://www.hypertransport.org : * * The HyperTransport I/O Link Specification */ @@ -301,7 +299,7 @@ #define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ #define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ -/* Message Signalled Interrupts registers */ +/* Message Signalled Interrupt registers */ #define PCI_MSI_FLAGS 2 /* Message Control */ #define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */ @@ -319,7 +317,7 @@ #define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ #define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ -/* MSI-X registers */ +/* MSI-X registers (in MSI-X capability) */ #define PCI_MSIX_FLAGS 2 /* Message Control */ #define PCI_MSIX_FLAGS_QSIZE 0x07FF /* Table size */ #define PCI_MSIX_FLAGS_MASKALL 0x4000 /* Mask all vectors for this function */ @@ -333,13 +331,13 @@ #define PCI_MSIX_FLAGS_BIRMASK PCI_MSIX_PBA_BIR /* deprecated */ #define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ -/* MSI-X Table entry format */ +/* MSI-X Table entry format (in memory mapped by a BAR) */ #define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR 0 -#define PCI_MSIX_ENTRY_UPPER_ADDR 4 -#define PCI_MSIX_ENTRY_DATA 8 -#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 -#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 /* Message Address */ +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 /* Message Upper Address */ +#define PCI_MSIX_ENTRY_DATA 8 /* Message Data */ +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 /* Vector Control */ +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001 /* CompactPCI Hotswap Register */ @@ -372,6 +370,12 @@ #define PCI_EA_FIRST_ENT_BRIDGE 8 /* First EA Entry for Bridges */ #define PCI_EA_ES 0x00000007 /* Entry Size */ #define PCI_EA_BEI 0x000000f0 /* BAR Equivalent Indicator */ + +/* EA fixed Secondary and Subordinate bus numbers for Bridge */ +#define PCI_EA_SEC_BUS_MASK 0xff +#define PCI_EA_SUB_BUS_MASK 0xff00 +#define PCI_EA_SUB_BUS_SHIFT 8 + /* 0-5 map to BARs 0-5 respectively */ #define PCI_EA_BEI_BAR0 0 #define PCI_EA_BEI_BAR5 5 @@ -465,19 +469,19 @@ /* PCI Express capability registers */ #define PCI_EXP_FLAGS 2 /* Capabilities register */ -#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ -#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ -#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ -#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ -#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ -#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ -#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */ -#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ -#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ -#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ -#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ -#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ +#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ +#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ #define PCI_EXP_DEVCAP 4 /* Device capabilities */ #define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */ #define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */ @@ -616,8 +620,8 @@ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ #define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */ #define PCI_EXP_RTSTA 32 /* Root Status */ -#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ +#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ /* * The Device Capabilities 2, Device Status 2, Device Control 2, * Link Capabilities 2, Link Status 2, Link Control 2, @@ -637,13 +641,13 @@ #define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ #define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ -#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ +#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ #define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ #define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */ #define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ -#define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040 /* Set Atomic requests */ -#define PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK 0x0080 /* Block atomic egress */ +#define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040 /* Set Atomic requests */ +#define PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK 0x0080 /* Block atomic egress */ #define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */ #define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */ #define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */ @@ -659,11 +663,11 @@ #define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ -#define PCI_EXP_LNKCTL2_TLS 0x000f -#define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */ -#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */ -#define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */ -#define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */ +#define PCI_EXP_LNKCTL2_TLS 0x000f +#define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */ +#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */ +#define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */ +#define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */ #define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ @@ -752,18 +756,18 @@ #define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ #define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ #define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ -#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */ #define PCI_ERR_ROOT_STATUS 48 -#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ -#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */ -#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */ -#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 /* Multiple FATAL/NONFATAL */ -#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First UNC is Fatal */ -#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ -#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ -#define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */ +#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ +#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */ +#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */ +#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 /* Multiple FATAL/NONFATAL */ +#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First UNC is Fatal */ +#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ +#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ +#define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */ #define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ /* Virtual Channel */ @@ -875,12 +879,12 @@ /* Page Request Interface */ #define PCI_PRI_CTRL 0x04 /* PRI control register */ -#define PCI_PRI_CTRL_ENABLE 0x01 /* Enable */ -#define PCI_PRI_CTRL_RESET 0x02 /* Reset */ +#define PCI_PRI_CTRL_ENABLE 0x0001 /* Enable */ +#define PCI_PRI_CTRL_RESET 0x0002 /* Reset */ #define PCI_PRI_STATUS 0x06 /* PRI status register */ -#define PCI_PRI_STATUS_RF 0x001 /* Response Failure */ -#define PCI_PRI_STATUS_UPRGI 0x002 /* Unexpected PRG index */ -#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */ +#define PCI_PRI_STATUS_RF 0x0001 /* Response Failure */ +#define PCI_PRI_STATUS_UPRGI 0x0002 /* Unexpected PRG index */ +#define PCI_PRI_STATUS_STOPPED 0x0100 /* PRI Stopped */ #define PCI_PRI_STATUS_PASID 0x8000 /* PRG Response PASID Required */ #define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */ #define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */ @@ -898,16 +902,16 @@ /* Single Root I/O Virtualization */ #define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ -#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */ +#define PCI_SRIOV_CAP_VFM 0x00000001 /* VF Migration Capable */ #define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */ #define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */ -#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */ -#define PCI_SRIOV_CTRL_VFM 0x02 /* VF Migration Enable */ -#define PCI_SRIOV_CTRL_INTR 0x04 /* VF Migration Interrupt Enable */ -#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */ -#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */ +#define PCI_SRIOV_CTRL_VFE 0x0001 /* VF Enable */ +#define PCI_SRIOV_CTRL_VFM 0x0002 /* VF Migration Enable */ +#define PCI_SRIOV_CTRL_INTR 0x0004 /* VF Migration Interrupt Enable */ +#define PCI_SRIOV_CTRL_MSE 0x0008 /* VF Memory Space Enable */ +#define PCI_SRIOV_CTRL_ARI 0x0010 /* ARI Capable Hierarchy */ #define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */ -#define PCI_SRIOV_STATUS_VFM 0x01 /* VF Migration Status */ +#define PCI_SRIOV_STATUS_VFM 0x0001 /* VF Migration Status */ #define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */ #define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */ #define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */ @@ -937,13 +941,13 @@ /* Access Control Service */ #define PCI_ACS_CAP 0x04 /* ACS Capability Register */ -#define PCI_ACS_SV 0x01 /* Source Validation */ -#define PCI_ACS_TB 0x02 /* Translation Blocking */ -#define PCI_ACS_RR 0x04 /* P2P Request Redirect */ -#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */ -#define PCI_ACS_UF 0x10 /* Upstream Forwarding */ -#define PCI_ACS_EC 0x20 /* P2P Egress Control */ -#define PCI_ACS_DT 0x40 /* Direct Translated P2P */ +#define PCI_ACS_SV 0x0001 /* Source Validation */ +#define PCI_ACS_TB 0x0002 /* Translation Blocking */ +#define PCI_ACS_RR 0x0004 /* P2P Request Redirect */ +#define PCI_ACS_CR 0x0008 /* P2P Completion Redirect */ +#define PCI_ACS_UF 0x0010 /* Upstream Forwarding */ +#define PCI_ACS_EC 0x0020 /* P2P Egress Control */ +#define PCI_ACS_DT 0x0040 /* Direct Translated P2P */ #define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */ #define PCI_ACS_CTRL 0x06 /* ACS Control Register */ #define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ @@ -993,9 +997,9 @@ #define PCI_EXP_DPC_CAP_DL_ACTIVE 0x1000 /* ERR_COR signal on DL_Active supported */ #define PCI_EXP_DPC_CTL 6 /* DPC control */ -#define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */ -#define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */ -#define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */ +#define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */ +#define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */ +#define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */ #define PCI_EXP_DPC_STATUS 8 /* DPC Status */ #define PCI_EXP_DPC_STATUS_TRIGGER 0x0001 /* Trigger Status */ diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index 7ee74c3474bf..8b2f993cbb77 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -1148,6 +1148,16 @@ enum { #define TCA_TAPRIO_SCHED_MAX (__TCA_TAPRIO_SCHED_MAX - 1) +/* The format for the admin sched (dump only): + * [TCA_TAPRIO_SCHED_ADMIN_SCHED] + * [TCA_TAPRIO_ATTR_SCHED_BASE_TIME] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_CMD] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_GATES] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_INTERVAL] + */ + enum { TCA_TAPRIO_ATTR_UNSPEC, TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */ @@ -1156,6 +1166,9 @@ enum { TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY, /* single entry */ TCA_TAPRIO_ATTR_SCHED_CLOCKID, /* s32 */ TCA_TAPRIO_PAD, + TCA_TAPRIO_ATTR_ADMIN_SCHED, /* The admin sched, only used in dump */ + TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME, /* s64 */ + TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION, /* s64 */ __TCA_TAPRIO_ATTR_MAX, }; diff --git a/include/uapi/linux/psci.h b/include/uapi/linux/psci.h index b3bcabe380da..2fcad1dd0b0e 100644 --- a/include/uapi/linux/psci.h +++ b/include/uapi/linux/psci.h @@ -49,8 +49,11 @@ #define PSCI_1_0_FN_PSCI_FEATURES PSCI_0_2_FN(10) #define PSCI_1_0_FN_SYSTEM_SUSPEND PSCI_0_2_FN(14) +#define PSCI_1_0_FN_SET_SUSPEND_MODE PSCI_0_2_FN(15) +#define PSCI_1_1_FN_SYSTEM_RESET2 PSCI_0_2_FN(18) #define PSCI_1_0_FN64_SYSTEM_SUSPEND PSCI_0_2_FN64(14) +#define PSCI_1_1_FN64_SYSTEM_RESET2 PSCI_0_2_FN64(18) /* PSCI v0.2 power state encoding for CPU_SUSPEND function */ #define PSCI_0_2_POWER_STATE_ID_MASK 0xffff @@ -97,6 +100,10 @@ #define PSCI_1_0_FEATURES_CPU_SUSPEND_PF_MASK \ (0x1 << PSCI_1_0_FEATURES_CPU_SUSPEND_PF_SHIFT) +#define PSCI_1_0_OS_INITIATED BIT(0) +#define PSCI_1_0_SUSPEND_MODE_PC 0 +#define PSCI_1_0_SUSPEND_MODE_OSI 1 + /* PSCI return values (inclusive of all PSCI versions) */ #define PSCI_RET_SUCCESS 0 #define PSCI_RET_NOT_SUPPORTED -1 diff --git a/include/uapi/linux/psp-sev.h b/include/uapi/linux/psp-sev.h index ac8c60bcc83b..43521d500c2b 100644 --- a/include/uapi/linux/psp-sev.h +++ b/include/uapi/linux/psp-sev.h @@ -6,8 +6,7 @@ * * Author: Brijesh Singh <brijesh.singh@amd.com> * - * SEV spec 0.14 is available at: - * http://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf + * SEV API specification is available at: https://developer.amd.com/sev/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -30,7 +29,8 @@ enum { SEV_PDH_GEN, SEV_PDH_CERT_EXPORT, SEV_PEK_CERT_IMPORT, - SEV_GET_ID, + SEV_GET_ID, /* This command is deprecated, use SEV_GET_ID2 */ + SEV_GET_ID2, SEV_MAX, }; @@ -125,7 +125,7 @@ struct sev_user_data_pdh_cert_export { } __packed; /** - * struct sev_user_data_get_id - GET_ID command parameters + * struct sev_user_data_get_id - GET_ID command parameters (deprecated) * * @socket1: Buffer to pass unique ID of first socket * @socket2: Buffer to pass unique ID of second socket @@ -136,6 +136,16 @@ struct sev_user_data_get_id { } __packed; /** + * struct sev_user_data_get_id2 - GET_ID command parameters + * @address: Buffer to store unique ID + * @length: length of the unique ID + */ +struct sev_user_data_get_id2 { + __u64 address; /* In */ + __u32 length; /* In/Out */ +} __packed; + +/** * struct sev_issue_cmd - SEV ioctl parameters * * @cmd: SEV commands to execute diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h index 22627f80063e..ed4ee170bee2 100644 --- a/include/uapi/linux/sched.h +++ b/include/uapi/linux/sched.h @@ -10,6 +10,7 @@ #define CLONE_FS 0x00000200 /* set if fs info shared between processes */ #define CLONE_FILES 0x00000400 /* set if open files shared between processes */ #define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */ +#define CLONE_PIDFD 0x00001000 /* set if a pidfd should be placed in parent */ #define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */ #define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */ #define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */ diff --git a/include/uapi/linux/sed-opal.h b/include/uapi/linux/sed-opal.h index 627624d35030..33e53b80cd1f 100644 --- a/include/uapi/linux/sed-opal.h +++ b/include/uapi/linux/sed-opal.h @@ -5,15 +5,6 @@ * Authors: * Rafael Antognolli <rafael.antognolli@intel.com> * Scott Bauer <scott.bauer@intel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. */ #ifndef _UAPI_SED_OPAL_H @@ -58,7 +49,7 @@ struct opal_key { struct opal_lr_act { struct opal_key key; __u32 sum; - __u8 num_lrs; + __u8 num_lrs; __u8 lr[OPAL_MAX_LRS]; __u8 align[2]; /* Align to 8 byte boundary */ }; diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 6009ee2c2e99..67c4aaaa2308 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -287,4 +287,10 @@ /* RDA UART */ #define PORT_RDA 118 +/* Socionext Milbeaut UART */ +#define PORT_MLB_USIO 119 + +/* SiFive UART */ +#define PORT_SIFIVE_V0 120 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/sockios.h b/include/uapi/linux/sockios.h index d393e9ed3964..7d1bccbbef78 100644 --- a/include/uapi/linux/sockios.h +++ b/include/uapi/linux/sockios.h @@ -19,6 +19,7 @@ #ifndef _LINUX_SOCKIOS_H #define _LINUX_SOCKIOS_H +#include <asm/bitsperlong.h> #include <asm/sockios.h> /* Linux-specific socket ioctls */ @@ -27,6 +28,26 @@ #define SOCK_IOC_TYPE 0x89 +/* + * the timeval/timespec data structure layout is defined by libc, + * so we need to cover both possible versions on 32-bit. + */ +/* Get stamp (timeval) */ +#define SIOCGSTAMP_NEW _IOR(SOCK_IOC_TYPE, 0x06, long long[2]) +/* Get stamp (timespec) */ +#define SIOCGSTAMPNS_NEW _IOR(SOCK_IOC_TYPE, 0x07, long long[2]) + +#if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) +/* on 64-bit and x32, avoid the ?: operator */ +#define SIOCGSTAMP SIOCGSTAMP_OLD +#define SIOCGSTAMPNS SIOCGSTAMPNS_OLD +#else +#define SIOCGSTAMP ((sizeof(struct timeval)) == 8 ? \ + SIOCGSTAMP_OLD : SIOCGSTAMP_NEW) +#define SIOCGSTAMPNS ((sizeof(struct timespec)) == 8 ? \ + SIOCGSTAMPNS_OLD : SIOCGSTAMPNS_NEW) +#endif + /* Routing table calls. */ #define SIOCADDRT 0x890B /* add routing table entry */ #define SIOCDELRT 0x890C /* delete routing table entry */ diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index c4253f0090d8..ee0f2460bff6 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -66,6 +66,9 @@ * @delay_usecs: If nonzero, how long to delay after the last bit transfer * before optionally deselecting the device before the next transfer. * @cs_change: True to deselect device before starting the next transfer. + * @word_delay_usecs: If nonzero, how long to wait between words within one + * transfer. This property needs explicit support in the SPI controller, + * otherwise it is silently ignored. * * This structure is mapped directly to the kernel spi_transfer structure; * the fields have the same meanings, except of course that the pointers @@ -100,7 +103,8 @@ struct spi_ioc_transfer { __u8 cs_change; __u8 tx_nbits; __u8 rx_nbits; - __u16 pad; + __u8 word_delay_usecs; + __u8 pad; /* If the contents of 'struct spi_ioc_transfer' ever change * incompatibly, then the ioctl number (currently 0) must change; diff --git a/include/uapi/linux/switchtec_ioctl.h b/include/uapi/linux/switchtec_ioctl.h index 4f4daf8db954..c912b5a678e4 100644 --- a/include/uapi/linux/switchtec_ioctl.h +++ b/include/uapi/linux/switchtec_ioctl.h @@ -50,7 +50,7 @@ struct switchtec_ioctl_flash_part_info { __u32 active; }; -struct switchtec_ioctl_event_summary { +struct switchtec_ioctl_event_summary_legacy { __u64 global; __u64 part_bitmap; __u32 local_part; @@ -59,6 +59,15 @@ struct switchtec_ioctl_event_summary { __u32 pff[48]; }; +struct switchtec_ioctl_event_summary { + __u64 global; + __u64 part_bitmap; + __u32 local_part; + __u32 padding; + __u32 part[48]; + __u32 pff[255]; +}; + #define SWITCHTEC_IOCTL_EVENT_STACK_ERROR 0 #define SWITCHTEC_IOCTL_EVENT_PPU_ERROR 1 #define SWITCHTEC_IOCTL_EVENT_ISP_ERROR 2 @@ -127,6 +136,8 @@ struct switchtec_ioctl_pff_port { _IOWR('W', 0x41, struct switchtec_ioctl_flash_part_info) #define SWITCHTEC_IOCTL_EVENT_SUMMARY \ _IOR('W', 0x42, struct switchtec_ioctl_event_summary) +#define SWITCHTEC_IOCTL_EVENT_SUMMARY_LEGACY \ + _IOR('W', 0x42, struct switchtec_ioctl_event_summary_legacy) #define SWITCHTEC_IOCTL_EVENT_CTL \ _IOWR('W', 0x43, struct switchtec_ioctl_event_ctl) #define SWITCHTEC_IOCTL_PFF_TO_PORT \ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 8bb6cc5f3235..b521464ea962 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -160,15 +160,42 @@ enum { #define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ #define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */ +/* + * Sender's congestion state indicating normal or abnormal situations + * in the last round of packets sent. The state is driven by the ACK + * information and timer events. + */ enum tcp_ca_state { + /* + * Nothing bad has been observed recently. + * No apparent reordering, packet loss, or ECN marks. + */ TCP_CA_Open = 0, #define TCPF_CA_Open (1<<TCP_CA_Open) + /* + * The sender enters disordered state when it has received DUPACKs or + * SACKs in the last round of packets sent. This could be due to packet + * loss or reordering but needs further information to confirm packets + * have been lost. + */ TCP_CA_Disorder = 1, #define TCPF_CA_Disorder (1<<TCP_CA_Disorder) + /* + * The sender enters Congestion Window Reduction (CWR) state when it + * has received ACKs with ECN-ECE marks, or has experienced congestion + * or packet discard on the sender host (e.g. qdisc). + */ TCP_CA_CWR = 2, #define TCPF_CA_CWR (1<<TCP_CA_CWR) + /* + * The sender is in fast recovery and retransmitting lost packets, + * typically triggered by ACK events. + */ TCP_CA_Recovery = 3, #define TCPF_CA_Recovery (1<<TCP_CA_Recovery) + /* + * The sender is in loss recovery triggered by retransmission timeout. + */ TCP_CA_Loss = 4 #define TCPF_CA_Loss (1<<TCP_CA_Loss) }; diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h index 6b2fd4d9655f..7df026ea6aff 100644 --- a/include/uapi/linux/tipc.h +++ b/include/uapi/linux/tipc.h @@ -190,6 +190,7 @@ struct sockaddr_tipc { #define TIPC_MCAST_REPLICAST 134 /* Default: TIPC selects. No arg */ #define TIPC_GROUP_JOIN 135 /* Takes struct tipc_group_req* */ #define TIPC_GROUP_LEAVE 136 /* No argument */ +#define TIPC_SOCK_RECVQ_USED 137 /* Default: none (read only) */ /* * Flag values diff --git a/include/uapi/linux/tipc_netlink.h b/include/uapi/linux/tipc_netlink.h index 0ebe02ef1a86..efb958fd167d 100644 --- a/include/uapi/linux/tipc_netlink.h +++ b/include/uapi/linux/tipc_netlink.h @@ -281,6 +281,8 @@ enum { TIPC_NLA_PROP_TOL, /* u32 */ TIPC_NLA_PROP_WIN, /* u32 */ TIPC_NLA_PROP_MTU, /* u32 */ + TIPC_NLA_PROP_BROADCAST, /* u32 */ + TIPC_NLA_PROP_BROADCAST_RATIO, /* u32 */ __TIPC_NLA_PROP_MAX, TIPC_NLA_PROP_MAX = __TIPC_NLA_PROP_MAX - 1 diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index 401d6f01de6a..5b9c26753e46 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -70,6 +70,13 @@ #define TLS_CIPHER_AES_GCM_256_TAG_SIZE 16 #define TLS_CIPHER_AES_GCM_256_REC_SEQ_SIZE 8 +#define TLS_CIPHER_AES_CCM_128 53 +#define TLS_CIPHER_AES_CCM_128_IV_SIZE 8 +#define TLS_CIPHER_AES_CCM_128_KEY_SIZE 16 +#define TLS_CIPHER_AES_CCM_128_SALT_SIZE 4 +#define TLS_CIPHER_AES_CCM_128_TAG_SIZE 16 +#define TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE 8 + #define TLS_SET_RECORD_TYPE 1 #define TLS_GET_RECORD_TYPE 2 @@ -94,4 +101,12 @@ struct tls12_crypto_info_aes_gcm_256 { unsigned char rec_seq[TLS_CIPHER_AES_GCM_256_REC_SEQ_SIZE]; }; +struct tls12_crypto_info_aes_ccm_128 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_AES_CCM_128_IV_SIZE]; + unsigned char key[TLS_CIPHER_AES_CCM_128_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_AES_CCM_128_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_AES_CCM_128_REC_SEQ_SIZE]; +}; + #endif /* _UAPI_LINUX_TLS_H */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 06479f2fb3ae..37807f23231e 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -404,6 +404,10 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_MPEG_BASE+228) #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_MPEG_BASE+229) +/* CIDs for the FWHT codec as used by the vicodec driver. */ +#define V4L2_CID_FWHT_I_FRAME_QP (V4L2_CID_MPEG_BASE + 290) +#define V4L2_CID_FWHT_P_FRAME_QP (V4L2_CID_MPEG_BASE + 291) + #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) #define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302) @@ -535,6 +539,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type { #define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (V4L2_CID_MPEG_BASE+382) #define V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION (V4L2_CID_MPEG_BASE+383) #define V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET (V4L2_CID_MPEG_BASE+384) +#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+385) +#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+386) +#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+387) +#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+388) #define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400) #define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401) #define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402) diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 02bb7ad6e986..8f10748dac79 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -353,6 +353,10 @@ struct vfio_region_gfx_edid { #define VFIO_DEVICE_GFX_LINK_STATE_DOWN 2 }; +#define VFIO_REGION_TYPE_CCW (2) +/* ccw sub-types */ +#define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1) + /* * 10de vendor sub-type * diff --git a/include/uapi/linux/vfio_ccw.h b/include/uapi/linux/vfio_ccw.h index 2ec5f367ff78..cbecbf0cd54f 100644 --- a/include/uapi/linux/vfio_ccw.h +++ b/include/uapi/linux/vfio_ccw.h @@ -12,6 +12,7 @@ #include <linux/types.h> +/* used for START SUBCHANNEL, always present */ struct ccw_io_region { #define ORB_AREA_SIZE 12 __u8 orb_area[ORB_AREA_SIZE]; @@ -22,4 +23,15 @@ struct ccw_io_region { __u32 ret_code; } __packed; +/* + * used for processing commands that trigger asynchronous actions + * Note: this is controlled by a capability + */ +#define VFIO_CCW_ASYNC_CMD_HSCH (1 << 0) +#define VFIO_CCW_ASYNC_CMD_CSCH (1 << 1) +struct ccw_cmd_region { + __u32 command; + __u32 ret_code; +} __packed; + #endif diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 1db220da3bcc..1050a75fb7ef 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -514,9 +514,21 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ #define V4L2_PIX_FMT_ARGB444 v4l2_fourcc('A', 'R', '1', '2') /* 16 aaaarrrr ggggbbbb */ #define V4L2_PIX_FMT_XRGB444 v4l2_fourcc('X', 'R', '1', '2') /* 16 xxxxrrrr ggggbbbb */ +#define V4L2_PIX_FMT_RGBA444 v4l2_fourcc('R', 'A', '1', '2') /* 16 rrrrgggg bbbbaaaa */ +#define V4L2_PIX_FMT_RGBX444 v4l2_fourcc('R', 'X', '1', '2') /* 16 rrrrgggg bbbbxxxx */ +#define V4L2_PIX_FMT_ABGR444 v4l2_fourcc('A', 'B', '1', '2') /* 16 aaaabbbb ggggrrrr */ +#define V4L2_PIX_FMT_XBGR444 v4l2_fourcc('X', 'B', '1', '2') /* 16 xxxxbbbb ggggrrrr */ +#define V4L2_PIX_FMT_BGRA444 v4l2_fourcc('B', 'A', '1', '2') /* 16 bbbbgggg rrrraaaa */ +#define V4L2_PIX_FMT_BGRX444 v4l2_fourcc('B', 'X', '1', '2') /* 16 bbbbgggg rrrrxxxx */ #define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ #define V4L2_PIX_FMT_ARGB555 v4l2_fourcc('A', 'R', '1', '5') /* 16 ARGB-1-5-5-5 */ #define V4L2_PIX_FMT_XRGB555 v4l2_fourcc('X', 'R', '1', '5') /* 16 XRGB-1-5-5-5 */ +#define V4L2_PIX_FMT_RGBA555 v4l2_fourcc('R', 'A', '1', '5') /* 16 RGBA-5-5-5-1 */ +#define V4L2_PIX_FMT_RGBX555 v4l2_fourcc('R', 'X', '1', '5') /* 16 RGBX-5-5-5-1 */ +#define V4L2_PIX_FMT_ABGR555 v4l2_fourcc('A', 'B', '1', '5') /* 16 ABGR-1-5-5-5 */ +#define V4L2_PIX_FMT_XBGR555 v4l2_fourcc('X', 'B', '1', '5') /* 16 XBGR-1-5-5-5 */ +#define V4L2_PIX_FMT_BGRA555 v4l2_fourcc('B', 'A', '1', '5') /* 16 BGRA-5-5-5-1 */ +#define V4L2_PIX_FMT_BGRX555 v4l2_fourcc('B', 'X', '1', '5') /* 16 BGRX-5-5-5-1 */ #define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ #define V4L2_PIX_FMT_ARGB555X v4l2_fourcc_be('A', 'R', '1', '5') /* 16 ARGB-5-5-5 BE */ @@ -528,7 +540,11 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ #define V4L2_PIX_FMT_ABGR32 v4l2_fourcc('A', 'R', '2', '4') /* 32 BGRA-8-8-8-8 */ #define V4L2_PIX_FMT_XBGR32 v4l2_fourcc('X', 'R', '2', '4') /* 32 BGRX-8-8-8-8 */ +#define V4L2_PIX_FMT_BGRA32 v4l2_fourcc('R', 'A', '2', '4') /* 32 ABGR-8-8-8-8 */ +#define V4L2_PIX_FMT_BGRX32 v4l2_fourcc('R', 'X', '2', '4') /* 32 XBGR-8-8-8-8 */ #define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */ +#define V4L2_PIX_FMT_RGBA32 v4l2_fourcc('A', 'B', '2', '4') /* 32 RGBA-8-8-8-8 */ +#define V4L2_PIX_FMT_RGBX32 v4l2_fourcc('X', 'B', '2', '4') /* 32 RGBX-8-8-8-8 */ #define V4L2_PIX_FMT_ARGB32 v4l2_fourcc('B', 'A', '2', '4') /* 32 ARGB-8-8-8-8 */ #define V4L2_PIX_FMT_XRGB32 v4l2_fourcc('B', 'X', '2', '4') /* 32 XRGB-8-8-8-8 */ @@ -669,6 +685,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ #define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */ #define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */ +#define V4L2_PIX_FMT_FWHT_STATELESS v4l2_fourcc('S', 'F', 'W', 'H') /* Stateless FWHT (vicodec) */ /* Vendor-specific formats */ #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ |