diff options
Diffstat (limited to 'tools/testing/selftests/tc-testing')
20 files changed, 3582 insertions, 35 deletions
diff --git a/tools/testing/selftests/tc-testing/README b/tools/testing/selftests/tc-testing/README index f9281e8aa313..22e5da9008fd 100644 --- a/tools/testing/selftests/tc-testing/README +++ b/tools/testing/selftests/tc-testing/README @@ -12,10 +12,10 @@ REQUIREMENTS * Minimum Python version of 3.4. Earlier 3.X versions may work but are not guaranteed. -* The kernel must have network namespace support +* The kernel must have network namespace support if using nsPlugin * The kernel must have veth support available, as a veth pair is created - prior to running the tests. + prior to running the tests when using nsPlugin. * The kernel must have the appropriate infrastructure enabled to run all tdc unit tests. See the config file in this directory for minimum required @@ -53,8 +53,12 @@ commands being tested must be run as root. The code that enforces execution by root uid has been moved into a plugin (see PLUGIN ARCHITECTURE, below). -If nsPlugin is linked, all tests are executed inside a network -namespace to prevent conflicts within the host. +Tests that use a network device should have nsPlugin.py listed as a +requirement for that test. nsPlugin executes all commands within a +network namespace and creates a veth pair which may be used in those test +cases. To disable execution within the namespace, pass the -N option +to tdc when starting a test run; the veth pair will still be created +by the plugin. Running tdc without any arguments will run all tests. Refer to the section on command line arguments for more information, or run: @@ -154,8 +158,8 @@ action: netns: options for nsPlugin (run commands in net namespace) - -n, --namespace - Run commands in namespace as specified in tdc_config.py + -N, --no-namespace + Do not run commands in a network namespace. valgrind: options for valgrindPlugin (run command under test under Valgrind) @@ -171,7 +175,8 @@ was in the tdc.py script has been moved into the plugins. The plugins are in the directory plugin-lib. The are executed from directory plugins. Put symbolic links from plugins to plugin-lib, -and name them according to the order you want them to run. +and name them according to the order you want them to run. This is not +necessary if a test case being run requires a specific plugin to work. Example: @@ -223,7 +228,8 @@ directory: - rootPlugin.py: implements the enforcement of running as root - nsPlugin.py: - sets up a network namespace and runs all commands in that namespace + sets up a network namespace and runs all commands in that namespace, + while also setting up dummy devices to be used in testing. - valgrindPlugin.py runs each command in the execute stage under valgrind, and checks for leaks. diff --git a/tools/testing/selftests/tc-testing/TdcPlugin.py b/tools/testing/selftests/tc-testing/TdcPlugin.py index b980a565fa89..79f3ca8617c9 100644 --- a/tools/testing/selftests/tc-testing/TdcPlugin.py +++ b/tools/testing/selftests/tc-testing/TdcPlugin.py @@ -18,12 +18,11 @@ class TdcPlugin: if self.args.verbose > 1: print(' -- {}.post_suite'.format(self.sub_class)) - def pre_case(self, testid, test_name, test_skip): + def pre_case(self, caseinfo, test_skip): '''run commands before test_runner does one test''' if self.args.verbose > 1: print(' -- {}.pre_case'.format(self.sub_class)) - self.args.testid = testid - self.args.test_name = test_name + self.args.caseinfo = caseinfo self.args.test_skip = test_skip def post_case(self): diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 203302065458..7c551968d184 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -38,11 +38,12 @@ CONFIG_NET_ACT_CSUM=m CONFIG_NET_ACT_VLAN=m CONFIG_NET_ACT_BPF=m CONFIG_NET_ACT_CONNMARK=m +CONFIG_NET_ACT_CTINFO=m CONFIG_NET_ACT_SKBMOD=m CONFIG_NET_ACT_IFE=m CONFIG_NET_ACT_TUNNEL_KEY=m +CONFIG_NET_ACT_MPLS=m CONFIG_NET_IFE_SKBMARK=m CONFIG_NET_IFE_SKBPRIO=m CONFIG_NET_IFE_SKBTCINDEX=m -CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y diff --git a/tools/testing/selftests/tc-testing/creating-testcases/scapy-example.json b/tools/testing/selftests/tc-testing/creating-testcases/scapy-example.json new file mode 100644 index 000000000000..5a9377b72d7f --- /dev/null +++ b/tools/testing/selftests/tc-testing/creating-testcases/scapy-example.json @@ -0,0 +1,98 @@ +[ + { + "id": "b1e9", + "name": "Test matching of source IP", + "category": [ + "actions", + "scapy" + ], + "plugins": { + "requires": [ + "nsPlugin", + "scapyPlugin" + ] + }, + "setup": [ + [ + "$TC qdisc del dev $DEV1 ingress", + 0, + 1, + 2, + 255 + ], + "$TC qdisc add dev $DEV1 ingress" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 3 protocol ip flower src_ip 16.61.16.61 flowid 1:1 action ok", + "scapy": { + "iface": "$DEV0", + "count": 1, + "packet": "Ether(type=0x800)/IP(src='16.61.16.61')/ICMP()" + }, + "expExitCode": "0", + "verifyCmd": "$TC -s -j filter ls dev $DEV1 ingress prio 3", + "matchJSON": [ + { + "path": [ + 1, + "options", + "actions", + 0, + "stats", + "packets" + ], + "value": 1 + } + ], + "teardown": [ + "$TC qdisc del dev $DEV1 ingress" + ] + }, + { + "id": "e9c4", + "name": "Test matching of source IP with wrong count", + "category": [ + "actions", + "scapy" + ], + "plugins": { + "requires": [ + "nsPlugin", + "scapyPlugin" + ] + }, + "setup": [ + [ + "$TC qdisc del dev $DEV1 ingress", + 0, + 1, + 2, + 255 + ], + "$TC qdisc add dev $DEV1 ingress" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 3 protocol ip flower src_ip 16.61.16.61 flowid 1:1 action ok", + "scapy": { + "iface": "$DEV0", + "count": 3, + "packet": "Ether(type=0x800)/IP(src='16.61.16.61')/ICMP()" + }, + "expExitCode": "0", + "verifyCmd": "$TC -s -j filter ls dev $DEV1 parent ffff:", + "matchJSON": [ + { + "path": [ + 1, + "options", + "actions", + 0, + "stats", + "packets" + ], + "value": 1 + } + ], + "teardown": [ + "$TC qdisc del dev $DEV1 ingress" + ] + } +] diff --git a/tools/testing/selftests/tc-testing/plugin-lib/buildebpfPlugin.py b/tools/testing/selftests/tc-testing/plugin-lib/buildebpfPlugin.py index 9f0ba10c44b4..e98c36750fae 100644 --- a/tools/testing/selftests/tc-testing/plugin-lib/buildebpfPlugin.py +++ b/tools/testing/selftests/tc-testing/plugin-lib/buildebpfPlugin.py @@ -34,8 +34,9 @@ class SubPlugin(TdcPlugin): 'buildebpf', 'options for buildebpfPlugin') self.argparser_group.add_argument( - '-B', '--buildebpf', action='store_true', - help='build eBPF programs') + '--nobuildebpf', action='store_false', default=True, + dest='buildebpf', + help='Don\'t build eBPF programs') return self.argparser diff --git a/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py b/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py index a194b1af2b30..affa7f2d9670 100644 --- a/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py +++ b/tools/testing/selftests/tc-testing/plugin-lib/nsPlugin.py @@ -18,6 +18,8 @@ class SubPlugin(TdcPlugin): if self.args.namespace: self._ns_create() + else: + self._ports_create() def post_suite(self, index): '''run commands after test_runner goes into a test loop''' @@ -27,6 +29,8 @@ class SubPlugin(TdcPlugin): if self.args.namespace: self._ns_destroy() + else: + self._ports_destroy() def add_args(self, parser): super().add_args(parser) @@ -34,8 +38,8 @@ class SubPlugin(TdcPlugin): 'netns', 'options for nsPlugin(run commands in net namespace)') self.argparser_group.add_argument( - '-n', '--namespace', action='store_true', - help='Run commands in namespace') + '-N', '--no-namespace', action='store_false', default=True, + dest='namespace', help='Don\'t run commands in namespace') return self.argparser def adjust_command(self, stage, command): @@ -73,20 +77,30 @@ class SubPlugin(TdcPlugin): print('adjust_command: return command [{}]'.format(command)) return command + def _ports_create(self): + cmd = 'ip link add $DEV0 type veth peer name $DEV1' + self._exec_cmd('pre', cmd) + cmd = 'ip link set $DEV0 up' + self._exec_cmd('pre', cmd) + if not self.args.namespace: + cmd = 'ip link set $DEV1 up' + self._exec_cmd('pre', cmd) + + def _ports_destroy(self): + cmd = 'ip link del $DEV0' + self._exec_cmd('post', cmd) + def _ns_create(self): ''' Create the network namespace in which the tests will be run and set up the required network devices for it. ''' + self._ports_create() if self.args.namespace: cmd = 'ip netns add {}'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) - cmd = 'ip link add $DEV0 type veth peer name $DEV1' - self._exec_cmd('pre', cmd) cmd = 'ip link set $DEV1 netns {}'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) - cmd = 'ip link set $DEV0 up' - self._exec_cmd('pre', cmd) cmd = 'ip -n {} link set $DEV1 up'.format(self.args.NAMES['NS']) self._exec_cmd('pre', cmd) if self.args.device: diff --git a/tools/testing/selftests/tc-testing/plugin-lib/scapyPlugin.py b/tools/testing/selftests/tc-testing/plugin-lib/scapyPlugin.py new file mode 100644 index 000000000000..229ee185b27e --- /dev/null +++ b/tools/testing/selftests/tc-testing/plugin-lib/scapyPlugin.py @@ -0,0 +1,50 @@ +#!/usr/bin/env python3 + +import os +import signal +from string import Template +import subprocess +import time +from TdcPlugin import TdcPlugin + +from tdc_config import * + +try: + from scapy.all import * +except ImportError: + print("Unable to import the scapy python module.") + print("\nIf not already installed, you may do so with:") + print("\t\tpip3 install scapy==2.4.2") + exit(1) + +class SubPlugin(TdcPlugin): + def __init__(self): + self.sub_class = 'scapy/SubPlugin' + super().__init__() + + def post_execute(self): + if 'scapy' not in self.args.caseinfo: + if self.args.verbose: + print('{}.post_execute: no scapy info in test case'.format(self.sub_class)) + return + + # Check for required fields + scapyinfo = self.args.caseinfo['scapy'] + scapy_keys = ['iface', 'count', 'packet'] + missing_keys = [] + keyfail = False + for k in scapy_keys: + if k not in scapyinfo: + keyfail = True + missing_keys.add(k) + if keyfail: + print('{}: Scapy block present in the test, but is missing info:' + .format(self.sub_class)) + print('{}'.format(missing_keys)) + + pkt = eval(scapyinfo['packet']) + if '$' in scapyinfo['iface']: + tpl = Template(scapyinfo['iface']) + scapyinfo['iface'] = tpl.safe_substitute(NAMES) + for count in range(scapyinfo['count']): + sendp(pkt, iface=scapyinfo['iface']) diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json b/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json index b074ea9b6fe8..47a3082b6661 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json @@ -54,6 +54,9 @@ "actions", "bpf" ], + "plugins": { + "requires": "buildebpfPlugin" + }, "setup": [ [ "$TC action flush action bpf", @@ -78,6 +81,9 @@ "actions", "bpf" ], + "plugins": { + "requires": "buildebpfPlugin" + }, "setup": [ [ "$TC action flush action bpf", diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/ct.json b/tools/testing/selftests/tc-testing/tc-tests/actions/ct.json new file mode 100644 index 000000000000..62b82fe10c89 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/ct.json @@ -0,0 +1,314 @@ +[ + { + "id": "696a", + "name": "Add simple ct action", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct index 42", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct zone 0 pipe.*index 42 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "9f20", + "name": "Add ct clear action", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct clear index 42", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct clear pipe.*index 42 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "5bea", + "name": "Try ct with zone", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct zone 404 index 42", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct zone 404 pipe.*index 42 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "d5d6", + "name": "Try ct with zone, commit", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct zone 404 commit index 42", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct commit zone 404 pipe.*index 42 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "029f", + "name": "Try ct with zone, commit, mark", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct zone 404 commit mark 0x42 index 42", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct commit mark 66 zone 404 pipe.*index 42 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "a58d", + "name": "Try ct with zone, commit, mark, nat", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct zone 404 commit mark 0x42 nat src addr 5.5.5.7 index 42", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct commit mark 66 zone 404 nat src addr 5.5.5.7 pipe.*index 42 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "901b", + "name": "Try ct with full nat ipv4 range syntax", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct commit nat src addr 5.5.5.7-5.5.6.0 port 1000-2000 index 44", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct commit zone 0 nat src addr 5.5.5.7-5.5.6.0 port 1000-2000 pipe.*index 44 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "072b", + "name": "Try ct with full nat ipv6 syntax", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct commit nat src addr 2001::1 port 1000-2000 index 44", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct commit zone 0 nat src addr 2001::1 port 1000-2000 pipe.*index 44 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "3420", + "name": "Try ct with full nat ipv6 range syntax", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct commit nat src addr 2001::1-2001::10 port 1000-2000 index 44", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct commit zone 0 nat src addr 2001::1-2001::10 port 1000-2000 pipe.*index 44 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "4470", + "name": "Try ct with full nat ipv6 range syntax + force", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct commit force nat src addr 2001::1-2001::10 port 1000-2000 index 44", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct commit force zone 0 nat src addr 2001::1-2001::10 port 1000-2000 pipe.*index 44 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "5d88", + "name": "Try ct with label", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct label 123123 index 44", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct zone 0 label 12312300000000000000000000000000 pipe.*index 44 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "04d4", + "name": "Try ct with label with mask", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct label 12312300000000000000000000000001/ffffffff000000000000000000000001 index 44", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct zone 0 label 12312300000000000000000000000001/ffffffff000000000000000000000001 pipe.*index 44 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + }, + { + "id": "9751", + "name": "Try ct with mark + mask", + "category": [ + "actions", + "ct" + ], + "setup": [ + [ + "$TC actions flush action ct", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action ct mark 0x42/0xf0 index 42", + "expExitCode": "0", + "verifyCmd": "$TC actions list action ct", + "matchPattern": "action order [0-9]*: ct mark 66/0xf0 zone 0 pipe.*index 42 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action ct" + ] + } +] diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json index 6e5fb3d25681..2232b21e2510 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json @@ -459,5 +459,99 @@ "teardown": [ "$TC actions flush action mirred" ] + }, + { + "id": "4749", + "name": "Add batch of 32 mirred redirect egress actions with cookie", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action mirred egress redirect dev lo index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "32", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "5c69", + "name": "Delete batch of 32 mirred redirect egress actions", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ], + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action mirred egress redirect dev lo index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\"" + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action mirred index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "0", + "teardown": [] + }, + { + "id": "d3c0", + "name": "Add batch of 32 mirred mirror ingress actions with cookie", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action mirred ingress mirror dev lo index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "32", + "teardown": [ + "$TC actions flush action mirred" + ] + }, + { + "id": "e684", + "name": "Delete batch of 32 mirred mirror ingress actions", + "category": [ + "actions", + "mirred" + ], + "setup": [ + [ + "$TC actions flush action mirred", + 0, + 1, + 255 + ], + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action mirred ingress mirror dev lo index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\"" + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action mirred index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mirred", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "0", + "teardown": [] } ] diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/mpls.json b/tools/testing/selftests/tc-testing/tc-tests/actions/mpls.json new file mode 100644 index 000000000000..e31a080edc49 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/mpls.json @@ -0,0 +1,1088 @@ +[ + { + "id": "a933", + "name": "Add MPLS dec_ttl action with pipe opcode", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl pipe index 8", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*pipe.*index 8 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "08d1", + "name": "Add mpls dec_ttl action with pass opcode", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl pass index 8", + "expExitCode": "0", + "verifyCmd": "$TC actions get action mpls index 8", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*pass.*index 8 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "d786", + "name": "Add mpls dec_ttl action with drop opcode", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl drop index 8", + "expExitCode": "0", + "verifyCmd": "$TC actions get action mpls index 8", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*drop.*index 8 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "f334", + "name": "Add mpls dec_ttl action with reclassify opcode", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl reclassify index 8", + "expExitCode": "0", + "verifyCmd": "$TC actions get action mpls index 8", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*reclassify.*index 8 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "29bd", + "name": "Add mpls dec_ttl action with continue opcode", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl continue index 8", + "expExitCode": "0", + "verifyCmd": "$TC actions get action mpls index 8", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*continue.*index 8 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "48df", + "name": "Add mpls dec_ttl action with jump opcode", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl jump 10 index 8", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*jump 10.*index 8 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "62eb", + "name": "Add mpls dec_ttl action with trap opcode", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl trap index 8", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl trap.*index 8 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "9118", + "name": "Add mpls dec_ttl action with invalid opcode", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl foo index 8", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*foo.*index 8 ref", + "matchCount": "0", + "teardown": [] + }, + { + "id": "6ce1", + "name": "Add mpls dec_ttl action with label (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl label 20", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*label.*20.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "352f", + "name": "Add mpls dec_ttl action with tc (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl tc 3", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*tc.*3.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "fa1c", + "name": "Add mpls dec_ttl action with ttl (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl ttl 20", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*ttl.*20.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "6b79", + "name": "Add mpls dec_ttl action with bos (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls dec_ttl bos 1", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*dec_ttl.*bos.*1.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "d4c4", + "name": "Add mpls pop action with ip proto", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls pop protocol ipv4", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*pop.*protocol.*ip.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "92fe", + "name": "Add mpls pop action with mpls proto", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls pop protocol mpls_mc", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*pop.*protocol.*mpls_mc.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "7e23", + "name": "Add mpls pop action with no protocol (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls pop", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*pop.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "6182", + "name": "Add mpls pop action with label (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls pop protocol ipv4 label 20", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*pop.*label.*20.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "6475", + "name": "Add mpls pop action with tc (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls pop protocol ipv4 tc 3", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*pop.*tc.*3.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "067b", + "name": "Add mpls pop action with ttl (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls pop protocol ipv4 ttl 20", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*pop.*ttl.*20.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "7316", + "name": "Add mpls pop action with bos (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls pop protocol ipv4 bos 1", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*pop.*bos.*1.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "38cc", + "name": "Add mpls push action with label", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push label 20", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*label.*20.*ttl.*[0-9]+.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "c281", + "name": "Add mpls push action with mpls_mc protocol", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push protocol mpls_mc label 20", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_mc.*label.*20.*ttl.*[0-9]+.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "5db4", + "name": "Add mpls push action with label, tc and ttl", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push label 20 tc 3 ttl 128", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*label.*20.*tc.*3.*ttl.*128.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "16eb", + "name": "Add mpls push action with label and bos", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push label 20 bos 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*label.*20.*bos.*1.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "d69d", + "name": "Add mpls push action with no label (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "e8e4", + "name": "Add mpls push action with ipv4 protocol (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push protocol ipv4 label 20", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*label.*20.*ttl.*[0-9]+.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "ecd0", + "name": "Add mpls push action with out of range label (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push label 1048576", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*label.*1048576.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "d303", + "name": "Add mpls push action with out of range tc (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push label 20 tc 8", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*label.*20.*tc.*8.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "fd6e", + "name": "Add mpls push action with ttl of 0 (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls push label 20 ttl 0", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*label.*20.*ttl.*0.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "19e9", + "name": "Add mpls mod action with mpls label", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod label 20", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*label.*20.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "1fde", + "name": "Add mpls mod action with max mpls label", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod label 0xfffff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*label.*1048575.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "0c50", + "name": "Add mpls mod action with mpls label exceeding max (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod label 0x100000", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*label.*1048576.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "10b6", + "name": "Add mpls mod action with mpls label of MPLS_LABEL_IMPLNULL (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod label 3", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*label.*3.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "57c9", + "name": "Add mpls mod action with mpls min tc", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod tc 0", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*tc.*0.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "6872", + "name": "Add mpls mod action with mpls max tc", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod tc 7", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*tc.*7.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "a70a", + "name": "Add mpls mod action with mpls tc exceeding max (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod tc 8", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*tc.*4.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "6ed5", + "name": "Add mpls mod action with mpls ttl", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod ttl 128", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*ttl.*128.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "b80f", + "name": "Add mpls mod action with mpls max ttl", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod ttl 255", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*ttl.*255.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "8864", + "name": "Add mpls mod action with mpls min ttl", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod ttl 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*ttl.*1.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "6c06", + "name": "Add mpls mod action with mpls ttl of 0 (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod ttl 0", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*ttl.*0.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "b5d8", + "name": "Add mpls mod action with mpls ttl exceeding max (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod ttl 256", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*ttl.*256.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "451f", + "name": "Add mpls mod action with mpls max bos", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod bos 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*bos.*1.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "a1ed", + "name": "Add mpls mod action with mpls min bos", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod bos 0", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*bos.*0.*pipe", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "3dcf", + "name": "Add mpls mod action with mpls bos exceeding max (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod bos 2", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*bos.*2.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "db7c", + "name": "Add mpls mod action with protocol (invalid)", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action mpls mod protocol ipv4", + "expExitCode": "255", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*modify.*protocol.*ip.*pipe", + "matchCount": "0", + "teardown": [] + }, + { + "id": "b070", + "name": "Replace existing mpls push action with new ID", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ], + "$TC actions add action mpls push label 20 pipe index 12" + ], + "cmdUnderTest": "$TC actions replace action mpls push label 30 pipe index 12", + "expExitCode": "0", + "verifyCmd": "$TC actions get action mpls index 12", + "matchPattern": "action order [0-9]+: mpls.*push.*protocol.*mpls_uc.*label.*30.*pipe.*index 12 ref", + "matchCount": "1", + "teardown": [ + "$TC actions flush action mpls" + ] + }, + { + "id": "6cce", + "name": "Delete mpls pop action", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ], + "$TC actions add action mpls pop protocol ipv4 index 44" + ], + "cmdUnderTest": "$TC actions del action mpls index 44", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*pop.*index 44 ref", + "matchCount": "0", + "teardown": [] + }, + { + "id": "d138", + "name": "Flush mpls actions", + "category": [ + "actions", + "mpls" + ], + "setup": [ + [ + "$TC actions flush action mpls", + 0, + 1, + 255 + ], + "$TC actions add action mpls push label 10 index 10", + "$TC actions add action mpls push label 20 index 20", + "$TC actions add action mpls push label 30 index 30", + "$TC actions add action mpls push label 40 index 40" + ], + "cmdUnderTest": "$TC actions flush action mpls", + "expExitCode": "0", + "verifyCmd": "$TC actions list action mpls", + "matchPattern": "action order [0-9]+: mpls.*push.*", + "matchCount": "0", + "teardown": [] + } +] diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json index b73ceb9e28b1..0d319f1d01db 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json @@ -47,5 +47,908 @@ "teardown": [ "$TC actions flush action pedit" ] + }, + { + "id": "377e", + "name": "Add pedit action with RAW_OP offset u32", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u32 set 0x90abcdef", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "12: val 90abcdef mask 00000000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "a0ca", + "name": "Add pedit action with RAW_OP offset u32 (INVALID)", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 2 u32 set 0x12345678", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "dd8a", + "name": "Add pedit action with RAW_OP offset u16 u16", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u16 set 0x1234 munge offset 14 u16 set 0x5678", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12340000 mask 0000ffff.*val 00005678 mask ffff0000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "53db", + "name": "Add pedit action with RAW_OP offset u16 (INVALID)", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 15 u16 set 0x1234", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "5c7e", + "name": "Add pedit action with RAW_OP offset u8 add value", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge offset 16 u8 add 0xf", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 16: add 0f000000 mask 00ffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "2893", + "name": "Add pedit action with RAW_OP offset u8 quad", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u8 set 0x12 munge offset 13 u8 set 0x34 munge offset 14 u8 set 0x56 munge offset 15 u8 set 0x78", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12000000 mask 00ffffff.*val 00340000 mask ff00ffff.*val 00005600 mask ffff00ff.*val 00000078 mask ffffff00", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "3a07", + "name": "Add pedit action with RAW_OP offset u8-u16-u8", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 0 u8 set 0x12 munge offset 1 u16 set 0x3456 munge offset 3 u8 set 0x78", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12000000 mask 00ffffff.*val 00345600 mask ff0000ff.*val 00000078 mask ffffff00", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "ab0f", + "name": "Add pedit action with RAW_OP offset u16-u8-u8", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 0 u16 set 0x1234 munge offset 2 u8 set 0x56 munge offset 3 u8 set 0x78", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12340000 mask 0000ffff.*val 00005600 mask ffff00ff.*val 00000078 mask ffffff00", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "9d12", + "name": "Add pedit action with RAW_OP offset u32 set u16 clear u8 invert", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 0 u32 set 0x12345678 munge offset 1 u16 clear munge offset 2 u8 invert", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12345678 mask 00000000.*val 00000000 mask ff0000ff.*val 0000ff00 mask ffffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "ebfa", + "name": "Add pedit action with RAW_OP offset overflow u32 (INVALID)", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 0xffffffffffffffffffffffffffffffffffffffffff u32 set 0x1", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "f512", + "name": "Add pedit action with RAW_OP offset u16 at offmask shift set", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u16 at 12 ffff 1 set 0xaaaa", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 12: val aaaa0000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "c2cb", + "name": "Add pedit action with RAW_OP offset u32 retain value", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u32 set 0x12345678 retain 0xff00", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 12: val 00005600 mask ffff00ff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "86d4", + "name": "Add pedit action with LAYERED_OP eth set src & dst", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth src set 11:22:33:44:55:66 munge eth dst set ff:ee:dd:cc:bb:aa", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "eth\\+4: val 00001122 mask ffff0000.*eth\\+8: val 33445566 mask 00000000.*eth\\+0: val ffeeddcc mask 00000000.*eth\\+4: val bbaa0000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "c715", + "name": "Add pedit action with LAYERED_OP eth set src (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth src set %e:11:m2:33:x4:-5", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "ba22", + "name": "Add pedit action with LAYERED_OP eth type set/clear sequence", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "5810", + "name": "Add pedit action with LAYERED_OP ip set src & dst", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip src set 18.52.86.120 munge ip dst set 18.52.86.120", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 12: val 12345678 mask 00000000.* 16: val 12345678 mask 00000000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "1092", + "name": "Add pedit action with LAYERED_OP ip set ihl & dsfield", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ihl set 0xff munge ip dsfield set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 0: val 0f000000 mask f0ffffff.* 0: val 00ff0000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "02d8", + "name": "Add pedit action with LAYERED_OP ip set ttl & protocol", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ttl set 0x1 munge ip protocol set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 8: val 01000000 mask 00ffffff.* 8: val 00ff0000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "3e2d", + "name": "Add pedit action with LAYERED_OP ip set ttl (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ttl set 300", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "31ae", + "name": "Add pedit action with LAYERED_OP ip ttl clear/set", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ttl clear munge ip ttl set 0x1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 8: val 00000000 mask 00ffffff.* 8: val 01000000 mask 00ffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "486f", + "name": "Add pedit action with LAYERED_OP ip set duplicate fields", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ttl set 0x1 munge ip ttl set 0x1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 8: val 01000000 mask 00ffffff.* 8: val 01000000 mask 00ffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "e790", + "name": "Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ce set 0xff munge ip df set 0xff munge ip mf set 0xff munge ip firstfrag set 0xff munge ip nofrag set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 4: val 00008000 mask ffff7fff.* 4: val 00004000 mask ffffbfff.* 4: val 00002000 mask ffffdfff.* 4: val 00001f00 mask ffffe0ff.* 4: val 00003f00 mask ffffc0ff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "6829", + "name": "Add pedit action with LAYERED_OP beyond ip set dport & sport", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip dport set 0x1234 munge ip sport set 0x5678", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 20: val 00001234 mask ffff0000.* 20: val 56780000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "afd8", + "name": "Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip icmp_type set 0xff munge ip icmp_code set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 20: val ff000000 mask 00ffffff.* 20: val ff000000 mask 00ffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "3143", + "name": "Add pedit action with LAYERED_OP beyond ip set dport (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip dport set 0x1234", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "fc1f", + "name": "Add pedit action with LAYERED_OP ip6 set src & dst", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip6 src set 2001:0db8:0:f101::1 munge ip6 dst set 2001:0db8:0:f101::1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "ipv6\\+8: val 20010db8 mask 00000000.*ipv6\\+12: val 0000f101 mask 00000000.*ipv6\\+16: val 00000000 mask 00000000.*ipv6\\+20: val 00000001 mask 00000000.*ipv6\\+24: val 20010db8 mask 00000000.*ipv6\\+28: val 0000f101 mask 00000000.*ipv6\\+32: val 00000000 mask 00000000.*ipv6\\+36: val 00000001 mask 00000000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "6d34", + "name": "Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip6 dst set 2001:0db8:0:f101::1 retain 0xff0000", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "6f5e", + "name": "Add pedit action with LAYERED_OP ip6 flow_lbl", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip6 flow_lbl set 0xfffff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "ipv6\\+0: val 0007ffff mask fff80000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "6795", + "name": "Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip6 payload_len set 0xffff munge ip6 nexthdr set 0xff munge ip6 hoplimit set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "ipv6\\+4: val ffff0000 mask 0000ffff.*ipv6\\+4: val 0000ff00 mask ffff00ff.*ipv6\\+4: val 000000ff mask ffffff00", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "1442", + "name": "Add pedit action with LAYERED_OP tcp set dport & sport", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge tcp dport set 4789 munge tcp sport set 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "tcp\\+0: val 000012b5 mask ffff0000.*tcp\\+0: val 00010000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "b7ac", + "name": "Add pedit action with LAYERED_OP tcp sport set (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge tcp sport set -200", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "cfcc", + "name": "Add pedit action with LAYERED_OP tcp flags set", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge tcp flags set 0x16", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "tcp\\+12: val 00160000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "3bc4", + "name": "Add pedit action with LAYERED_OP tcp set dport, sport & flags fields", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge tcp dport set 4789 munge tcp sport set 1 munge tcp flags set 0x1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "tcp\\+0: val 000012b5 mask ffff0000.*tcp\\+0: val 00010000 mask 0000ffff.*tcp\\+12: val 00010000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "f1c8", + "name": "Add pedit action with LAYERED_OP udp set dport & sport", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge udp dport set 4789 munge udp sport set 4789", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "udp\\+0: val 000012b5 mask ffff0000.*udp\\+0: val 12b50000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "d784", + "name": "Add pedit action with mixed RAW/LAYERED_OP #1", + "category": [ + "actions", + "pedit", + "layered_op", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth src set 11:22:33:44:55:66 munge ip ttl set 0xff munge tcp flags clear munge offset 15 u8 add 40 retain 0xf0 munge udp dport add 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "eth\\+4: val 00001122 mask ffff0000.*eth\\+8: val 33445566 mask 00000000.*ipv4\\+8: val ff000000 mask 00ffffff.*tcp\\+12: val 00000000 mask ff00ffff.* 12: add 00000020 mask ffffff0f.*udp\\+0: add 00000001 mask ffff0000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "70ca", + "name": "Add pedit action with mixed RAW/LAYERED_OP #2", + "category": [ + "actions", + "pedit", + "layered_op", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth src set 11:22:33:44:55:66 munge eth dst set ff:ee:dd:cc:bb:aa munge ip6 payload_len set 0xffff munge ip6 nexthdr set 0xff munge ip6 hoplimit preserve munge offset 0 u8 set 0x12 munge offset 1 u16 set 0x3456 munge offset 3 u8 set 0x78 munge ip ttl set 0xaa munge ip protocol set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "eth\\+4: val 00001122 mask ffff0000.*eth\\+8: val 33445566 mask 00000000.*eth\\+0: val ffeeddcc mask 00000000.*eth\\+4: val bbaa0000 mask 0000ffff.*ipv6\\+4: val ffff0000 mask 0000ffff.*ipv6\\+4: val 0000ff00 mask ffff00ff.*ipv6\\+4: val 00000000 mask ffffffff.* 0: val 12000000 mask 00ffffff.* 0: val 00345600 mask ff0000ff.* 0: val 00000078 mask ffffff00.*ipv4\\+8: val aa000000 mask 00ffffff.*ipv4\\+8: val 00ff0000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] } + ] diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json index ecd96eda7f6a..bf5ebf59c2d4 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json @@ -24,8 +24,32 @@ ] }, { + "id": "c8cf", + "name": "Add skbedit action with 32-bit maximum mark", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 4294967295 pipe index 1", + "expExitCode": "0", + "verifyCmd": "$TC actions get action skbedit index 1", + "matchPattern": "action order [0-9]*: skbedit mark 4294967295.*pipe.*index 1", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { "id": "407b", - "name": "Add skbedit action with invalid mark", + "name": "Add skbedit action with mark exceeding 32-bit maximum", "category": [ "actions", "skbedit" @@ -43,6 +67,121 @@ "verifyCmd": "$TC actions list action skbedit", "matchPattern": "action order [0-9]*: skbedit mark", "matchCount": "0", + "teardown": [] + }, + { + "id": "d4cd", + "name": "Add skbedit action with valid mark and mask", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 1/0xaabb", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit mark 1/0xaabb", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "baa7", + "name": "Add skbedit action with valid mark and 32-bit maximum mask", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 1/0xffffffff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit mark 1/0xffffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action skbedit" + ] + }, + { + "id": "62a5", + "name": "Add skbedit action with valid mark and mask exceeding 32-bit maximum", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 1/0xaabbccddeeff112233", + "expExitCode": "255", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit mark 1/0xaabbccddeeff112233", + "matchCount": "0", + "teardown": [] + }, + { + "id": "bc15", + "name": "Add skbedit action with valid mark and mask with invalid format", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 1/-1234", + "expExitCode": "255", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit mark 1/-1234", + "matchCount": "0", + "teardown": [] + }, + { + "id": "57c2", + "name": "Replace skbedit action with new mask", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ], + "$TC actions add action skbedit mark 1/0x11223344 index 1" + ], + "cmdUnderTest": "$TC actions replace action skbedit mark 1/0xaabb index 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action skbedit", + "matchPattern": "action order [0-9]*: skbedit mark 1/0xaabb", + "matchCount": "1", "teardown": [ "$TC actions flush action skbedit" ] @@ -121,7 +260,7 @@ }, { "id": "985c", - "name": "Add skbedit action with invalid queue_mapping", + "name": "Add skbedit action with queue_mapping exceeding 16-bit maximum", "category": [ "actions", "skbedit" @@ -413,7 +552,7 @@ }, { "id": "a6d6", - "name": "Add skbedit action with index", + "name": "Add skbedit action with index at 32-bit maximum", "category": [ "actions", "skbedit" @@ -426,16 +565,38 @@ 255 ] ], - "cmdUnderTest": "$TC actions add action skbedit mark 808 index 4040404040", + "cmdUnderTest": "$TC actions add action skbedit mark 808 index 4294967295", "expExitCode": "0", - "verifyCmd": "$TC actions list action skbedit", - "matchPattern": "index 4040404040", + "verifyCmd": "$TC actions get action skbedit index 4294967295", + "matchPattern": "action order [0-9]*: skbedit mark 808.*index 4294967295", "matchCount": "1", "teardown": [ "$TC actions flush action skbedit" ] }, { + "id": "f0f4", + "name": "Add skbedit action with index exceeding 32-bit maximum", + "category": [ + "actions", + "skbedit" + ], + "setup": [ + [ + "$TC actions flush action skbedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action skbedit mark 808 pass index 4294967297", + "expExitCode": "255", + "verifyCmd": "$TC actions get action skbedit index 4294967297", + "matchPattern": "action order [0-9]*:.*skbedit.*mark 808.*pass.*index 4294967297", + "matchCount": "0", + "teardown": [] + }, + { "id": "38f3", "name": "Delete skbedit action", "category": [ diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/fw.json b/tools/testing/selftests/tc-testing/tc-tests/filters/fw.json index 3b97cfd7e0f8..5272049566d6 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/fw.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/fw.json @@ -6,6 +6,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress" ], @@ -25,6 +28,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress" ], @@ -44,6 +50,114 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress" ], @@ -57,6 +171,30 @@ ] }, { + "id": "c591", + "name": "Add fw filter with action ok by reference", + "__comment": "We add sleep here because action might have not been deleted by workqueue just yet. Remove this when the behaviour is fixed.", + "category": [ + "filter", + "fw" + ], + "setup": [ + "$TC qdisc add dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions add action gact ok index 1" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action gact index 1", + "expExitCode": "0", + "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw", + "matchPattern": "handle 0x1.*gact action pass.*index 1 ref 2 bind 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions del action gact index 1" + ] + }, + { "id": "affe", "name": "Add fw filter with action continue", "category": [ @@ -76,6 +214,30 @@ ] }, { + "id": "38b3", + "name": "Add fw filter with action continue by reference", + "__comment": "We add sleep here because action might have not been deleted by workqueue just yet. Remove this when the behaviour is fixed.", + "category": [ + "filter", + "fw" + ], + "setup": [ + "$TC qdisc add dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions add action gact continue index 1" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action gact index 1", + "expExitCode": "0", + "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw", + "matchPattern": "handle 0x1.*gact action continue.*index 1 ref 2 bind 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions del action gact index 1" + ] + }, + { "id": "28bc", "name": "Add fw filter with action pipe", "category": [ @@ -95,6 +257,30 @@ ] }, { + "id": "6753", + "name": "Add fw filter with action pipe by reference", + "__comment": "We add sleep here because action might have not been deleted by workqueue just yet.", + "category": [ + "filter", + "fw" + ], + "setup": [ + "$TC qdisc add dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions add action gact pipe index 1" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action gact index 1", + "expExitCode": "0", + "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw", + "matchPattern": "handle 0x1.*gact action pipe.*index 1 ref 2 bind 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions del action gact index 1" + ] + }, + { "id": "8da2", "name": "Add fw filter with action drop", "category": [ @@ -114,6 +300,30 @@ ] }, { + "id": "6dc6", + "name": "Add fw filter with action drop by reference", + "__comment": "We add sleep here because action might have not been deleted by workqueue just yet.", + "category": [ + "filter", + "fw" + ], + "setup": [ + "$TC qdisc add dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions add action gact drop index 1" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action gact index 1", + "expExitCode": "0", + "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw", + "matchPattern": "handle 0x1.*gact action drop.*index 1 ref 2 bind 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions del action gact index 1" + ] + }, + { "id": "9436", "name": "Add fw filter with action reclassify", "category": [ @@ -133,6 +343,30 @@ ] }, { + "id": "3bc2", + "name": "Add fw filter with action reclassify by reference", + "__comment": "We add sleep here because action might have not been deleted by workqueue just yet.", + "category": [ + "filter", + "fw" + ], + "setup": [ + "$TC qdisc add dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions add action gact reclassify index 1" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action gact index 1", + "expExitCode": "0", + "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw", + "matchPattern": "handle 0x1.*gact action reclassify.*index 1 ref 2 bind 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions del action gact index 1" + ] + }, + { "id": "95bb", "name": "Add fw filter with action jump 10", "category": [ @@ -152,6 +386,30 @@ ] }, { + "id": "36f7", + "name": "Add fw filter with action jump 10 by reference", + "__comment": "We add sleep here because action might have not been deleted by workqueue just yet.", + "category": [ + "filter", + "fw" + ], + "setup": [ + "$TC qdisc add dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions add action gact jump 10 index 1" + ], + "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action gact index 1", + "expExitCode": "0", + "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw", + "matchPattern": "handle 0x1.*gact action jump 10.*index 1 ref 2 bind 1", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress", + "/bin/sleep 1", + "$TC actions del action gact index 1" + ] + }, + { "id": "3d74", "name": "Add fw filter with action goto chain 5", "category": [ @@ -728,6 +986,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: protocol 802_3 prio 3 handle 7 fw action ok" @@ -748,6 +1009,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: prio 6 handle 2 fw action continue index 5" @@ -768,6 +1032,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress" ], @@ -787,6 +1054,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress" ], @@ -806,6 +1076,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 5 prio 7 fw action pass", @@ -828,6 +1101,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 5 prio 7 fw action pass", @@ -850,6 +1126,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 5 prio 7 fw action pass", @@ -871,6 +1150,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 1 prio 4 fw action ok", @@ -892,6 +1174,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 4 prio 2 chain 13 fw action pipe", @@ -913,6 +1198,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 2 prio 4 fw action drop" @@ -933,6 +1221,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 3 prio 4 fw action continue" @@ -953,6 +1244,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 4 prio 2 protocol arp fw action pipe" @@ -973,6 +1267,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 4 prio 2 fw action pipe flowid 45" @@ -993,6 +1290,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 1 prio 2 fw action ok" @@ -1013,6 +1313,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 1 prio 2 fw action ok" @@ -1033,6 +1336,9 @@ "filter", "fw" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress", "$TC filter add dev $DEV1 parent ffff: handle 1 prio 2 fw action ok index 3" diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json index 2d096b2abf2c..0f89cd50a94b 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json @@ -6,6 +6,9 @@ "filter", "u32" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 ingress" ], @@ -25,6 +28,9 @@ "filter", "matchall" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV1 clsact", "$TC filter add dev $DEV1 protocol all pref 1 ingress handle 0x1234 matchall action ok" @@ -39,12 +45,34 @@ ] }, { + "id": "2ff3", + "name": "Add flower with max handle and then dump it", + "category": [ + "filter", + "flower" + ], + "setup": [ + "$TC qdisc add dev $DEV2 ingress" + ], + "cmdUnderTest": "$TC filter add dev $DEV2 protocol ip pref 1 parent ffff: handle 0xffffffff flower action ok", + "expExitCode": "0", + "verifyCmd": "$TC filter show dev $DEV2 ingress", + "matchPattern": "filter protocol ip pref 1 flower.*handle 0xffffffff", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV2 ingress" + ] + }, + { "id": "d052", "name": "Add 1M filters with the same action", "category": [ "filter", "flower" ], + "plugins": { + "requires": "nsPlugin" + }, "setup": [ "$TC qdisc add dev $DEV2 ingress", "./tdc_batch.py $DEV2 $BATCH_FILE --share_action -n 1000000" @@ -58,5 +86,28 @@ "$TC qdisc del dev $DEV2 ingress", "/bin/rm $BATCH_FILE" ] + }, + { + "id": "4cbd", + "name": "Try to add filter with duplicate key", + "category": [ + "filter", + "flower" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$TC qdisc add dev $DEV2 ingress", + "$TC filter add dev $DEV2 protocol ip prio 1 parent ffff: flower dst_mac e4:11:22:11:4a:51 src_mac e4:11:22:11:4a:50 ip_proto tcp src_ip 1.1.1.1 dst_ip 2.2.2.2 action drop" + ], + "cmdUnderTest": "$TC filter add dev $DEV2 protocol ip prio 1 parent ffff: flower dst_mac e4:11:22:11:4a:51 src_mac e4:11:22:11:4a:50 ip_proto tcp src_ip 1.1.1.1 dst_ip 2.2.2.2 action drop", + "expExitCode": "2", + "verifyCmd": "$TC -s filter show dev $DEV2 ingress", + "matchPattern": "filter protocol ip pref 1 flower chain 0 handle", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV2 ingress" + ] } ] diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json new file mode 100644 index 000000000000..f518c55f468b --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ingress.json @@ -0,0 +1,102 @@ +[ + { + "id": "9872", + "name": "Add ingress qdisc", + "category": [ + "qdisc", + "ingress" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 ingress", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc ingress ffff:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress", + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "5c5e", + "name": "Add ingress qdisc with unsupported argument", + "category": [ + "qdisc", + "ingress" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 ingress foorbar", + "expExitCode": "1", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc ingress ffff:", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "74f6", + "name": "Add duplicate ingress qdisc", + "category": [ + "qdisc", + "ingress" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true", + "$TC qdisc add dev $DEV1 ingress" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 ingress", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc ingress ffff:", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 ingress", + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "f769", + "name": "Delete nonexistent ingress qdisc", + "category": [ + "qdisc", + "ingress" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc del dev $DEV1 ingress", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc ingress ffff:", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "3b88", + "name": "Delete ingress qdisc twice", + "category": [ + "qdisc", + "ingress" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true", + "$TC qdisc add dev $DEV1 ingress", + "$TC qdisc del dev $DEV1 ingress" + ], + "cmdUnderTest": "$TC qdisc del dev $DEV1 ingress", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc ingress ffff:", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + } +] diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json new file mode 100644 index 000000000000..9c792fa8ca23 --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/prio.json @@ -0,0 +1,276 @@ +[ + { + "id": "ddd9", + "name": "Add prio qdisc on egress", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 handle 1: root prio", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 handle 1: root prio", + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "aa71", + "name": "Add prio qdisc on egress with handle of maximum value", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 root handle ffff: prio", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio ffff: root", + "matchCount": "1", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "db37", + "name": "Add prio qdisc on egress with invalid handle exceeding maximum value", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 root handle 10000: prio", + "expExitCode": "255", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 10000: root", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "39d8", + "name": "Add prio qdisc on egress with unsupported argument", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 handle 1: root prio foorbar", + "expExitCode": "1", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "5769", + "name": "Add prio qdisc on egress with 4 bands and new priomap", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 handle 1: root prio bands 4 priomap 1 1 2 2 3 3 0 0 1 2 3 0 0 0 0 0", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root.*bands 4 priomap.*1 1 2 2 3 3 0 0 1 2 3 0 0 0 0 0", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 handle 1: root prio", + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "fe0f", + "name": "Add prio qdisc on egress with 4 bands and priomap exceeding TC_PRIO_MAX entries", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 handle 1: root prio bands 4 priomap 1 1 2 2 3 3 0 0 1 2 3 0 0 0 0 0 1 1", + "expExitCode": "1", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root.*bands 4 priomap.*1 1 2 2 3 3 0 0 1 2 3 0 0 0 0 0 1 1", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "1f91", + "name": "Add prio qdisc on egress with 4 bands and priomap's values exceeding bands number", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 handle 1: root prio bands 4 priomap 1 1 2 2 7 5 0 0 1 2 3 0 0 0 0 0", + "expExitCode": "1", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root.*bands 4 priomap.*1 1 2 2 7 5 0 0 1 2 3 0 0 0 0 0", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "d248", + "name": "Add prio qdisc on egress with invalid bands value (< 2)", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 handle 1: root prio bands 1 priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root.*bands 1 priomap.*0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "1d0e", + "name": "Add prio qdisc on egress with invalid bands value exceeding TCQ_PRIO_BANDS", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 handle 1: root prio bands 1024 priomap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root.*bands 1024 priomap.*1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "1971", + "name": "Replace default prio qdisc on egress with 8 bands and new priomap", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true", + "$TC qdisc add dev $DEV1 handle 1: root prio" + ], + "cmdUnderTest": "$TC qdisc replace dev $DEV1 handle 1: root prio bands 8 priomap 1 1 2 2 3 3 4 4 5 5 6 6 7 7 0 0", + "expExitCode": "0", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root.*bands 8 priomap.*1 1 2 2 3 3 4 4 5 5 6 6 7 7 0 0", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 handle 1: root prio", + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "d88a", + "name": "Add duplicate prio qdisc on egress", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true", + "$TC qdisc add dev $DEV1 handle 1: root prio" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 handle 1: root prio", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 handle 1: root prio", + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "5948", + "name": "Delete nonexistent prio qdisc", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc del dev $DEV1 root handle 1: prio", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 1: root", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "6c0a", + "name": "Add prio qdisc on egress with invalid format for handles", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DEV1 root handle 123^ prio", + "expExitCode": "255", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc prio 123 root", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + }, + { + "id": "0175", + "name": "Delete prio qdisc twice", + "category": [ + "qdisc", + "prio" + ], + "setup": [ + "$IP link add dev $DEV1 type dummy || /bin/true", + "$TC qdisc add dev $DEV1 root handle 1: prio", + "$TC qdisc del dev $DEV1 root handle 1: prio" + ], + "cmdUnderTest": "$TC qdisc del dev $DEV1 handle 1: root prio", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DEV1", + "matchPattern": "qdisc ingress ffff:", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DEV1 type dummy" + ] + } +] diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py index 5cee15659e5f..f04321ace9fb 100755 --- a/tools/testing/selftests/tc-testing/tdc.py +++ b/tools/testing/selftests/tc-testing/tdc.py @@ -25,6 +25,9 @@ from tdc_helper import * import TdcPlugin from TdcResults import * +class PluginDependencyException(Exception): + def __init__(self, missing_pg): + self.missing_pg = missing_pg class PluginMgrTestFail(Exception): def __init__(self, stage, output, message): @@ -37,7 +40,7 @@ class PluginMgr: super().__init__() self.plugins = {} self.plugin_instances = [] - self.args = [] + self.failed_plugins = {} self.argparser = argparser # TODO, put plugins in order @@ -53,6 +56,64 @@ class PluginMgr: self.plugins[mn] = foo self.plugin_instances.append(foo.SubPlugin()) + def load_plugin(self, pgdir, pgname): + pgname = pgname[0:-3] + foo = importlib.import_module('{}.{}'.format(pgdir, pgname)) + self.plugins[pgname] = foo + self.plugin_instances.append(foo.SubPlugin()) + self.plugin_instances[-1].check_args(self.args, None) + + def get_required_plugins(self, testlist): + ''' + Get all required plugins from the list of test cases and return + all unique items. + ''' + reqs = [] + for t in testlist: + try: + if 'requires' in t['plugins']: + if isinstance(t['plugins']['requires'], list): + reqs.extend(t['plugins']['requires']) + else: + reqs.append(t['plugins']['requires']) + except KeyError: + continue + reqs = get_unique_item(reqs) + return reqs + + def load_required_plugins(self, reqs, parser, args, remaining): + ''' + Get all required plugins from the list of test cases and load any plugin + that is not already enabled. + ''' + pgd = ['plugin-lib', 'plugin-lib-custom'] + pnf = [] + + for r in reqs: + if r not in self.plugins: + fname = '{}.py'.format(r) + source_path = [] + for d in pgd: + pgpath = '{}/{}'.format(d, fname) + if os.path.isfile(pgpath): + source_path.append(pgpath) + if len(source_path) == 0: + print('ERROR: unable to find required plugin {}'.format(r)) + pnf.append(fname) + continue + elif len(source_path) > 1: + print('WARNING: multiple copies of plugin {} found, using version found') + print('at {}'.format(source_path[0])) + pgdir = source_path[0] + pgdir = pgdir.split('/')[0] + self.load_plugin(pgdir, fname) + if len(pnf) > 0: + raise PluginDependencyException(pnf) + + parser = self.call_add_args(parser) + (args, remaining) = parser.parse_known_args(args=remaining, namespace=args) + return args + def call_pre_suite(self, testcount, testidlist): for pgn_inst in self.plugin_instances: pgn_inst.pre_suite(testcount, testidlist) @@ -61,15 +122,15 @@ class PluginMgr: for pgn_inst in reversed(self.plugin_instances): pgn_inst.post_suite(index) - def call_pre_case(self, testid, test_name, *, test_skip=False): + def call_pre_case(self, caseinfo, *, test_skip=False): for pgn_inst in self.plugin_instances: try: - pgn_inst.pre_case(testid, test_name, test_skip) + pgn_inst.pre_case(caseinfo, test_skip) except Exception as ee: print('exception {} in call to pre_case for {} plugin'. format(ee, pgn_inst.__class__)) print('test_ordinal is {}'.format(test_ordinal)) - print('testid is {}'.format(testid)) + print('testid is {}'.format(caseinfo['id'])) raise def call_post_case(self): @@ -98,6 +159,9 @@ class PluginMgr: command = pgn_inst.adjust_command(stage, command) return command + def set_args(self, args): + self.args = args + @staticmethod def _make_argparser(args): self.argparser = argparse.ArgumentParser( @@ -197,14 +261,14 @@ def run_one_test(pm, args, index, tidx): res = TestResult(tidx['id'], tidx['name']) res.set_result(ResultState.skip) res.set_errormsg('Test case designated as skipped.') - pm.call_pre_case(tidx['id'], tidx['name'], test_skip=True) + pm.call_pre_case(tidx, test_skip=True) pm.call_post_execute() return res # populate NAMES with TESTID for this test NAMES['TESTID'] = tidx['id'] - pm.call_pre_case(tidx['id'], tidx['name']) + pm.call_pre_case(tidx) prepare_env(args, pm, 'setup', "-----> prepare stage", tidx["setup"]) if (args.verbose > 0): @@ -550,6 +614,7 @@ def filter_tests_by_category(args, testlist): return answer + def get_test_cases(args): """ If a test case file is specified, retrieve tests from that file. @@ -611,7 +676,7 @@ def get_test_cases(args): return allcatlist, allidlist, testcases_by_cats, alltestcases -def set_operation_mode(pm, args): +def set_operation_mode(pm, parser, args, remaining): """ Load the test case data and process remaining arguments to determine what the script should do for this run, and call the appropriate @@ -649,6 +714,12 @@ def set_operation_mode(pm, args): exit(0) if len(alltests): + req_plugins = pm.get_required_plugins(alltests) + try: + args = pm.load_required_plugins(req_plugins, parser, args, remaining) + except PluginDependencyException as pde: + print('The following plugins were not found:') + print('{}'.format(pde.missing_pg)) catresults = test_runner(pm, args, alltests) if args.format == 'none': print('Test results output suppression requested\n') @@ -686,11 +757,12 @@ def main(): parser = pm.call_add_args(parser) (args, remaining) = parser.parse_known_args() args.NAMES = NAMES + pm.set_args(args) check_default_settings(args, remaining, pm) if args.verbose > 2: print('args is {}'.format(args)) - set_operation_mode(pm, args) + set_operation_mode(pm, parser, args, remaining) exit(0) diff --git a/tools/testing/selftests/tc-testing/tdc_config.py b/tools/testing/selftests/tc-testing/tdc_config.py index 942c70c041be..b771d4c89621 100644 --- a/tools/testing/selftests/tc-testing/tdc_config.py +++ b/tools/testing/selftests/tc-testing/tdc_config.py @@ -10,6 +10,8 @@ Copyright (C) 2017 Lucas Bates <lucasb@mojatatu.com> NAMES = { # Substitute your own tc path here 'TC': '/sbin/tc', + # Substitute your own ip path here + 'IP': '/sbin/ip', # Name of veth devices to be created for the namespace 'DEV0': 'v0p0', 'DEV1': 'v0p1', diff --git a/tools/testing/selftests/tc-testing/tdc_helper.py b/tools/testing/selftests/tc-testing/tdc_helper.py index 9f35c96c88a0..0440d252c4c5 100644 --- a/tools/testing/selftests/tc-testing/tdc_helper.py +++ b/tools/testing/selftests/tc-testing/tdc_helper.py @@ -17,7 +17,10 @@ def get_categorized_testlist(alltests, ucat): def get_unique_item(lst): """ For a list, return a list of the unique items in the list. """ - return list(set(lst)) + if len(lst) > 1: + return list(set(lst)) + else: + return lst def get_test_categories(alltests): |