summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] USB: Whiteheat: fix firmware spurious errorsStuart MacDonald2006-06-221-2/+2
| | | | | | | Attached patch fixes spurious errors during firmware load. Signed-off-by: Stuart MacDonald <stuartm@connecttech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Driver for Apple Cinema Displayakpm@osdl.org2006-06-224-0/+394
| | | | | | | | | | | | | This is a driver to control the brightness of an Apple Cinema Display over USB. It updates the local brightness value if the user presses a button on the display. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Oliver Neukum <oliver@neukum.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: ftdi_sio: add support for Yost Engineering ServoCenter3.1Ian Abbott2006-06-222-0/+7
| | | | | | | | | | This patch adds support for Yost Engineering Inc's ServoCenter 3.1 USB product to the ftdi_sio driver's device ID table. The PID was supplied by Aaron Prose of Yost Engineering on the ftdi-usb-sio-devel list. The PID 0xE050 matches the Windows INF files for this device. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbhid: Remove unneeded blacklist entriesAlan Stern2006-06-221-28/+0Star
| | | | | | | | | | Now that usbhid automatically applies HID_QUIRK_NOGET to keyboards and mice, we no longer need the blacklist entries that were present for no other purpose. This patch (as698) removes them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbcore: Fix broken RNDIS config selectionGiridhar Pemmasani2006-06-221-1/+1
| | | | | | | | | | RNDIS devices don't get configured owing to a typo in choose_configuration(). This patch from Giridhar Pemmasani fixes the typo. From: Giridhar Pemmasani <giri@lmc.cs.sunysb.edu> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: print message when device is rejected due to insufficient powerDaniel Drake2006-06-221-1/+9
| | | | | | | | | | | | | | 2.6.16 introduces USB power budgeting in the Linux kernel, and since then, a fair number of users have observed that some of their devices no longer work in unpowered hubs (this is not a bug, the devices claim that they need more than 100mA). The very least we can do is print an informational message to the kernel log when this happens, otherwise it is not at all clear why the device was not accepted. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: more pegasus log spamming removedDavid Brownell2006-06-221-3/+26
| | | | | | | | Remove more log spamming from pegasus: stop talking to the device once we see ENODEV reported. It may take a while before khubd notifies us. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] ub: random cleanupsPete Zaitcev2006-06-221-48/+12Star
| | | | | | | | | Remove some silly messages and cast in stone "temporary" messages which we keep around. Also, I am hesitant to remove the initialization retries without having the hardware to test (anyone who was at KS04 has a spare?) Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] ub: atomic add_diskPete Zaitcev2006-06-221-7/+3Star
| | | | | | | | | | | | | | | | | | | <zaitcev> I am taling about this: "if (disk->flags & GENHD_FL_UP) del_gendisk(disk);" <zaitcev> If del_gendisk() undoes add_disk() like viro just said, why is it conditional? <viro> huh? <viro> add_disk() sets the damn flag <zaitcev> So, I should not need to check ever <viro> so the above is "if I've called add_disk(), call gendisk()" <viro> which might be what you want, of course <viro> but usually you know if you'd done add_disk() on that puppy anyway In ub, nobody upstream should ever see half-constructed disks before they were passed to add_disk. To that end, only add the struct lun to the list on the path of no return. With that fix in place, we do not need to test GENHD_FL_UP. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: rmmod pl2303 after -28Pete Zaitcev2006-06-221-0/+2
| | | | | | | | Wait for the scheduled work to finish before freeing memory, prevent oops. http://bugzilla.kernel.org/show_bug.cgi?id=6596 Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] improved TT scheduling for EHCIDan Streetman2006-06-222-2/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | This updates the EHCI driver by adding an improved scheduler for the transaction translators, found in USB 2.0 hubs and used for low and full speed devices. - adds periodic_tt_usecs() and some helper functions, which does the same thing that "periodic_usecs" does, except on the other side of the TT, i.e. it calculates the low/fullspeed bandwidth usage instead of highspeed. - adds a tt_available() function which is the new implementation of what tt_no_collision() does ... while tt_no_collision() ensures that each TT handles only 1 periodic transfer at a time (a very pessimistic approach) this version instead tracks bandwidth and allows each TT to handle as many transfers as will fit on each TT's downstream bus (closer to best-case). The new scheduler is selected by a config option, marked as EXPERIMENTAL so it can be tested (and more broadly reviewed) for a while until it seems safe to remove the original scheduler. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usb-storage: get rid of the timer during URB submissionFranck Bui-Huu2006-06-221-28/+10Star
| | | | | | | | | | | | This patch uses completion timeout instead of a timer to implement a timeout when submitting an URB. It also put the task in interruptible state instead of an uninterruptible one while waiting for the completion. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Syntax cleanup for pl2303 (trailing backslash)Pete Zaitcev2006-06-221-1/+1
| | | | | | | Remove the silly trailing backslash. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Improve Kconfig comment for mct_u232Pete Zaitcev2006-06-221-1/+1
| | | | | | | | | | | Add a couple of supported devices into the help message. It's a long story... I promised this comment changed to a user long ago, so I'd like to have that promise kept. In reality though, nobody is likely to read this anyway. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB serial: encapsulate schedule_work, remove double-callingPete Zaitcev2006-06-2218-25/+29
| | | | | | | | | | | I'm going to throw schedule_work away, it's retarded. But for starters, let's have it encapsulated. Also, generic and whiteheat were both calling usb_serial_port_softint and scheduled work. Only one was necessary. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usb: io_edgeport, cleanup to unicode handlingPete Zaitcev2006-06-221-16/+26
| | | | | | | Clean up the unicode handling in io_edgeport. Make get_string size-limited. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbtest: report errors in iso testsAlan Stern2006-06-221-7/+29
| | | | | | | | | | | | | This patch (as693b) makes the usbtest driver report errors in the isochronous bulk transfer tests instead of always returning 0. As an arbitrary cutoff, an error is returned if more than 10% of the packet transfers fail. It also stops a test immediately upon receiving an URB submission error. For a test harness, it's especially important to report when errors occur! Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] gadgetfs: fix memory leaksAlan Stern2006-06-221-22/+29
| | | | | | | | | This patch (as692) fixes a few memory leaks in some unimportant error pathways of the gadgetfs driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] gadgetfs: fix AIO interface bugsAlan Stern2006-06-221-6/+5Star
| | | | | | | | This patch (as691) fixes a few errors in the AIO interface for the gadgetfs driver. Now requests will complete properly instead of hanging. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: new cp2101 deviceVitja Makarov2006-06-221-0/+1
| | | | | | | | | | | | | | | By the way I have to ask you to add new (vid,pid) pair to cp2101 driver. This device is argussoft's avr in-system programmer AS3M, http://atmel.argussoft.ru/hard.htm it's based on cp2101 chip and works pretty well with the linux driver. It could be used with argussoft's `asisp1109.exe' (http://atmel.argussoft.ru/download/software/as-tools.soft/asisp.zip) tool run under wine. Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: add usb_interrupt_msg() function for api completeness.Greg Kroah-Hartman2006-06-222-0/+33
| | | | | | | Really just a wrapper around usb_bulk_msg() but now it's documented much better. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Fix a deadlock in usbtestFranck Bui-Huu2006-06-221-0/+2
| | | | | | | | | | | | ctrl_complete functions acquires ctx->lock and tries to unlink all queued urbs in case of errors through usb_unlink_urb func. In its turn usb_unlink_urb calls, through the hcd driver, usb_hcd_giveback_urb which calls ctrl_complete again. At this time, ctx->lock is already taken by the same function. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: remove ISO TDs as they are usedAlan Stern2006-06-223-37/+90
| | | | | | | | | | | | This patch (as690) does the same thing for ISO TDs as as680 did for non-ISO TDs: free them as they are used rather than all at once when an URB is complete. At the same time it fixes a minor buglet (I'm not aware of it ever affecting anyone): An ISO TD should be retired when its frame is over, regardless of whether or not the hardware has marked it inactive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: store the period in the queue headerAlan Stern2006-06-223-50/+63
| | | | | | | | | | | This patch (as689) stores the period for periodic transfers (interrupt and ISO) in the queue header. This is necessary for proper bandwidth tracking (not yet implemented). It also makes the scheduling of ISO transfers a bit more rigorous, with checks for out-of-bounds frame numbers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: fix race in ISO dequeuingAlan Stern2006-06-221-12/+36
| | | | | | | | | | | | This patch (as688) fixes a small race in uhci-hcd. Because ISO queues aren't controlled by queue headers, they can't be unlinked. Only individual URBs can. So whenever multiple ISO URBs are dequeued, it's necessary to make sure the hardware is done with each one. We can't assume that dequeuing the first URB will suffice to unlink the entire queue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: use integer-sized frame numbersAlan Stern2006-06-223-19/+28
| | | | | | | | | | This patch (as687) changes uhci-hcd to keep track of frame numbers as full-sized integers rather than 11-bit values. This makes them a lot easier to handle and makes it possible to schedule beyond a 2-second window, should anyone ever want to do so. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Allow high-bandwidth isochronous packets via usbfsMicah Dowty2006-06-221-1/+2
| | | | | | | | | | | This patch increases an arbitrary limit on the size of individual isochronous packets submitted via usbfs. The limit is still arbitrary, but it's now large enough to support the maximum packet size used by high-bandwidth isochronous transfers. Signed-off-by: Micah Dowty <micah@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Remove 4088-byte limit on usbfs control URBsMicah Dowty2006-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | This patch removes the artificial 4088-byte limit that usbfs currently places on Control transfers. The USB spec does not specify a strict limit on the size of an entire control transfer. It does, however, state that the data stage "follows the same protocol rules as bulk transfers." (USB 2, 8.5.3) The level of support for large control transfers in real host controllers varies, but it's important to support at least 4K transfers. Windows enforces a maximum control transfer size of 4K, so there exists some hardware that requires a full 4096 byte data stage. Without this patch, we fall short of that by 8 bytes on architectures with a 4K page size, and it becomes impossible to support such hardware with a user-space driver. Since any limit placed on control transfers by usbfs would be arbitrary, this patch replaces the PAGE_SIZE limit with the same arbitrary limit used by bulk transfers. Signed-off-by: Micah Dowty <micah@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: correct the USB info in Documentation/power/swsusp.txtDavid Brownell2006-06-221-14/+23
| | | | | | | | | | | | | The swsusp.txt documentation harshes confusingly on USB, and this patch addresses the issue. It's harsh because it blames USB for some issues that are generic to all drivers -- especially those supporting removable media -- and it's confusing since it says that USB has the issue with "suspend" not just swsusp ... while in reality, USB doesn't have the issue when real system suspend states are used. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Work around old Intel bugAlan Stern2006-06-221-1/+15
| | | | | | | | | | Some old Intel UHCI controllers have a bug that has shown up in a few systems (the PIIX3 "Neptune" chip set). Until now there has not been any simple way to work around the bug, but the lastest changes in uhci-hcd have made it easy. This patch (as684) adds the work-around. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Reimplement FSBRAlan Stern2006-06-225-57/+143
| | | | | | | | | | | | This patch (as683) re-implements Full-Speed Bandwidth Reclamation (FSBR) properly. It keeps track of which endpoint queues have advanced, and when none have advanced for a sufficiently long time, FSBR is turned off. The next TD on each of the non-moving queues is modified to generate an interrupt on completion, so that FSBR can be re-enabled as soon as the hardware starts to make some progress. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Eliminate the TD-removal listAlan Stern2006-06-223-71/+27Star
| | | | | | | | | | This patch (as682) gets rid of the TD-removal list in uhci-hcd. It is no longer needed because now TDs are not freed until we know the hardware isn't using them. It also simplifies the code for adding and removing TDs to/from URBs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Move code for cleaning up unlinked URBsAlan Stern2006-06-221-24/+33
| | | | | | | | This patch (as681) moves some code for cleaning up after unlinked URBs out of the general completion pathway into the unlinking pathway. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Remove non-iso TDs as they are usedAlan Stern2006-06-223-39/+45
| | | | | | | | | | | This patch (as680) frees non-isochronous TDs as they are used, rather than all at once when an URB is complete. Although not a terribly important change in itself, it opens the door to a later enhancement that will reduce storage requirements by allocating only a limited number of TDs at any time for each endpoint queue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Common result routine for Control/Bulk/InterruptAlan Stern2006-06-221-217/+125Star
| | | | | | | | | | | This patch (as679) combines the result routine for Control URBs with the routine for Bulk/Interrupt URBs. Along the way I eliminated the debugging printouts for Control transfers unless the debugging level is set higher than 1. I also eliminated a long-unused (#ifdef'ed-out) section that works around some buggy old APC BackUPS devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbhid: automatically set HID_QUIRK_NOGET for keyboards and miceAlan Stern2006-06-222-0/+16
| | | | | | | | | | | | | | | It seems to be relatively common for USB keyboards and mice to dislike being polled for reports. Since there's no need to poll a keyboard or a mouse, this patch (as685) automatically sets the HID_QUIRK_NOGET flag for devices that advertise themselves as either sort of device with boot protocol support. This won't cure all the problems since some devices don't support the boot protocol, but it's simple and easy and it should fix quite a few problems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB HID/HIDBP, INPUT DRIVERS: fix various usb/input/hid-input.c bugs ↵Bart Massey2006-06-223-13/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | that make Apple Mighty Mouse work poorly Transposed lines of code in drivers/usb/input/hid-input.c causes the capability bits for a new HID device to be set before quirks are applied at configuration time. When an HID event is then sent up to the input layer, it may then be discarded as irrelevant because the wrong capability bit is set. Further, the quirks for the Apple Mighty Mouse are not quite right: the horizontal scrolling needs its axis reversed, and the left and center buttons are transposed. Also, the mouse is labeled in the kernel with its earlier name (I think) of Apple PowerMouse. Steps to reproduce problem: Plug in an Apple Mighty Mouse. Note that horizontal scrolling doesn't work at all, and in fact doesn't generate any input events on /dev/input/eventN. Note also that pushing the middle button performs the right button action, and vice versa. Once you have the horizontal scrolling working, note that it is backward WRT both to vertical scrolling and to common sense. This patch maybe should be broken up, as it does address two problems. The transposed code in hidinput_configure_usage() probably creates bugs beyond just the Mighty Mouse. The rest of the patch renames POWERMOUSE to MIGHTYMOUSE everywhere (which I *believe* is correct), fixes the MIGHTYMOUSE quirk to swap the center and right mouse buttons, and adds a new quirk HID_QUIRK_INVERT_HWHEEL also assigned to the MIGHTYMOUSE with code in hidinput_hid_event() to implement it. Signed-off-by: Bart Massey <bart@cs.pdx.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: UHCI: fix obscure bug in enqueue()Alan Stern2006-06-221-9/+15
| | | | | | | | | | | This patch (as676) fixes a small bug in uhci-hcd's enqueue routine. When an URB is unlinked or gets an error and the completion handler queues another URB for the same endpoint, the queue shouldn't be allowed to start up again until the handler returns. Not even if the new URB is the only one on its queue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: UHCI: store the endpoint type in the QH structureAlan Stern2006-06-223-23/+38
| | | | | | | | This patch (as675) simplifies uhci-hcd slightly by storing each endpoint's type in the corresponding Queue Header structure. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: net2280: add a shutdown routineAlan Stern2006-06-221-0/+17
| | | | | | | | | The net2280 board has an annoying habit of surviving soft reboots with interrupts enabled. This patch (as674) adds a shutdown routine to the driver so that the board can be put in a quiescent state. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: usb-storage alauda: Fix transport info mismergeDaniel Drake2006-06-221-9/+9
| | | | | | | | Unfortunately it looks like the transport entry for this subdriver was merged into the protocol section, making this driver unusable :( Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB shuttle_usbat: hardcode flash detection for nowDaniel Drake2006-06-221-1/+1
| | | | | | | | | | | | | | | | | | | After some further testing with my flash device I realised that our current probe doesn't always work (e.g. when no media is inserted). Now that Peter Chubb's patch has simplified the detection of 99% of the HP CD writers out there, we have a much smaller range of hardware to work with on the shared device ID, so it should be possible to try some of the previous probe options again: we just need to find another tester with a USBAT2-based HP CD writer. This patch hardcodes the flash detection until someone comes along with one of these obscure CD drives. Note that these devices are extremely rare, so even if we can't ever find a decent probe method, at least we will be supporting almost all of the USBAT-based hardware out there. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: shuttle_usbat: Hardcode detection of HP CDRW devicesPeter Chubb2006-06-223-20/+43
| | | | | | | | | | | Use USB vendor and product IDs to determine whether the attached device is a CDROM or a Flash device. Daniel Drake says that the *same* vendor and product IDs for non-HP vendor ID could be either flash or cdrom, so try to probe for them. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: shuttle_usbat: Fix handling of scatter-gather buffersPeter Chubb2006-06-221-24/+30
| | | | | | | | | | | | | | | | | | | I've worked out what's going wrong. The scsi layer is now much more likely to pass down scatterlists instead of plain buffers. So you have to make sure that they're handled correctly. In one of the changes along the way, usbat_write_block and friends stopped obeying the srb->use_sg flag. Anyway, with the appended patch, and the one I'm putting in the next email, it all seems to work for the HP cd4e. Of course, someone's going to have to test it with the flash drives as well.... This patch teaches the usbat_{read,write}_block functions to obey the use_sg flag in the scsi-request. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB Phidget InterfaceKit: make inputs pollable and new device supportSean Young2006-06-221-85/+218
| | | | | | | | | Make inputs pollable using sysfs_notify and add support for the Phidget InterfaceKit 0/16/16. Various cleanups. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Daniel Saakes <daniel@saakes.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USBATM: remove no-longer needed #includeDuncan Sands2006-06-221-1/+0Star
| | | | | | | | We #include <linux/netdevice.h> only because <linux/etherdevice.h> needed it, but didn't #include it itself. But that's been fixed now. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USBATM: remove pointless inlineDuncan Sands2006-06-221-1/+1
| | | | | | | Remove pointless inline. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: clean out an unnecessary NULL check from ubPete Zaitcev2006-06-221-6/+2Star
| | | | | | | Remove the check for NULL which makes no sense. Suggested by Al. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: usbcore: always turn on hub port powerAlan Stern2006-06-221-8/+15
| | | | | | | | | | | | | | | Some hubs claim not to support port-power switching, and right now the hub driver believes them and does not enable power to their ports. However it turns out that even though they don't actually switch power, they do ignore all events on a port until told to turn on the power! This problem has been reported by several users. This revised patch (as672b) makes the hub driver always try to turn on port power to all hubs, regardless of what the hub descriptor says. It also adds a comment explaining the need for this. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: MacBook Pro touchpad supportNicolas Boichat2006-06-221-6/+107
| | | | | | | | | | | | Add support for MacBook touchpad in appletouch driver. Thanks to Alex Harper for the informations. Use u16 instead of int16_t in atp_is_geyser* functions. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Stelian Pop <stelian@popies.net> Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-12 20:45:07 +0200