summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* macintosh: windfarm: Another convert to using %pOFn instead of device_node.nameRob Herring2018-11-261-3/+3
| | | | | | | | | | | In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Convert the open coded iterating thru child nodes to for_each_child_of_node() while we're here. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Use device_type helpers to access the node typeRob Herring2018-11-2618-67/+44Star
| | | | | | | | | | | | Remove directly accessing device_node.type pointer and use the accessors instead. This will eventually allow removing the type pointer. Replace the open coded iterating over child nodes with for_each_child_of_node() while we're here. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Rework btext_find_display to use of_stdout and device_type helpersRob Herring2018-11-261-12/+4Star
| | | | | | | | | | | | Remove directly accessing device_node.type pointer and use the accessors instead. This will eventually allow removing the type pointer. In the process, the of_stdout pointer can be used instead of finding the stdout node again. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/configs: Add KVM guest defconfigSatheesh Rajendran2018-11-262-0/+21
| | | | | | | | | | | This patch adds new defconfig options for powerpc KVM guest and guest.config with additional config symbols enabled, which is to build kernel to boot without initramfs and can be used as place holder for guest specific additional config symbols in future. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/configs: Add missing config symbols for ppc64_defconfigSatheesh Rajendran2018-11-261-1/+10
| | | | | | | | | This patch adds missing config symbols for ppc64_defconfig to enable cgroups, memhotplug, numa balancing and XFS in core kernel image. Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/configs: Add CONFIG_NR_CPUS to ppc64_defconfigSatheesh Rajendran2018-11-261-0/+1
| | | | | | | | | CONFIG_NR_CPUS is not set in ppc64_defconfig, So it gets default of 32 which is quite small for modern powerpc systems. Instead set a default of 2048 like other powerpc defconfigs. Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/configs: Update ppc64_defconfig with savedefconfigMichael Ellerman2018-11-261-34/+34
| | | | | | | Update ppc64_defconfig with savedefconfig. No symbols are added or removed, this is 100% movement. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/configs: Remove unnecessary ftrace symbolsMichael Ellerman2018-11-262-4/+0Star
| | | | | | | | | | | | | | | | | | | | | In commit 539df7fcb303 ("powerpc/configs: Enable function trace by default") we added: CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y To ppc64_defconfig, powernv_defconfig and pseries_defconfig. But only CONFIG_FUNCTION_TRACER=y is required, CONFIG_FTRACE is default y if DEBUG_KERNEL is enabled, which we have. And then CONFIG_FUNCTION_GRAPH_TRACER is default y when CONFIG_FUNCTION_TRACER is enabled. The extra symbols were already removed from powernv_defconfig in commit 9a018fb1e147 ("powerpc/config: powernv_defconfig updates"). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/pasemi: Use dma_zalloc_coherent()Sabyasachi Gupta2018-11-251-3/+1Star
| | | | | | | Replace dma_alloc_coherent() + memset() with dma_zalloc_coherent(). Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/85xx: Drop pointless static qualifierYue Haibing2018-11-251-1/+1
| | | | | | | | There is no need to have the 'void __iomem *cpld_base' variable static since new value always be assigned before use it. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc64/ftrace: Drop pointless static qualifier in is_b_op()YueHaibing2018-11-251-1/+1
| | | | | | | | | There is no need to have the 'intoffset' variable static since new value always be assigned before use it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Typo s/use use/use/Geert Uytterhoeven2018-11-251-1/+1
| | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/fadump: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li2018-11-251-11/+1Star
| | | | | | | | Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/powernv/vas: Use DEFINE_SHOW_ATTRIBUTE macroYangtao Li2018-11-251-24/+4Star
| | | | | | | Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: mark 64-bit PD_HUGE constant as unsigned longDaniel Axtens2018-11-251-1/+1
| | | | | | | | | | | | | | When compiled for 64-bit, the PD_HUGE constant is a 64-bit integer. Mark it as an unsigned long. This squashes over a thousand sparse warnings on my minimal T4240RDB (e6500, ppc64be) config, of the following 2 forms: arch/powerpc/include/asm/hugetlb.h:52:49: warning: constant 0x8000000000000000 is so big it is unsigned long arch/powerpc/include/asm/nohash/pgtable.h:269:49: warning: constant 0x8000000000000000 is so big it is unsigned long Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/mm: remove const type qualifier from function ‘pud_pfn’Mathieu Malaterre2018-11-251-1/+1
| | | | | | | | | Type qualifier on return type is ignored. Remove warning in W=1: arch/powerpc/include/asm/book3s/64/pgtable.h:1268:25: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/32: Add .data..Lubsan_data*/.data..Lubsan_type* sections explicitlyMathieu Malaterre2018-11-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | When both `CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y` and `CONFIG_UBSAN=y` are set, link step typically produce numberous warnings about orphan section: + powerpc-linux-gnu-ld -EB -m elf32ppc -Bstatic --orphan-handling=warn --build-id --gc-sections -X -o .tmp_vmlinux1 -T ./arch/powerpc/kernel/vmlinux.lds --who le-archive built-in.a --no-whole-archive --start-group lib/lib.a --end-group powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_data393' from `init/main.o' being placed in section `.data..Lubsan_data393'. powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_data394' from `init/main.o' being placed in section `.data..Lubsan_data394'. ... powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_type11' from `init/main.o' being placed in section `.data..Lubsan_type11'. powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_type12' from `init/main.o' being placed in section `.data..Lubsan_type12'. ... This commit remove those warnings produced at W=1. Link: https://www.mail-archive.com/linuxppc-dev@lists.ozlabs.org/msg135407.html Suggested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* selftests/powerpc: Skip test instead of failingBreno Leitao2018-11-251-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | Current core-pkey selftest fails if the test runs without privileges to write into the core pattern file (/proc/sys/kernel/core_pattern). This causes the test to fail and give the impression that the subsystem being tested is broken, when, in fact, the test is being executed without the proper privileges. This is the current error: test: core_pkey tags: git_version:v4.19-3-g9e3363be9bce-dirty Error writing to core_pattern file: Permission denied failure: core_pkey This patch simply skips this test if it runs without the proper privileges, avoiding this undesired failure. CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> CC: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* selftests/powerpc: Create a new SKIP_IF macroBreno Leitao2018-11-251-0/+10
| | | | | | | | | | This patch creates a new macro that skips a test and prints a message to stderr. This is useful to give an idea why the tests is being skipped, other than just skipping the test blindly. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* selftests/powerpc: Allocate base registersBreno Leitao2018-11-257-10/+8Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ptrace selftests are passing input operands using a constraint that can allocate any register for the operand, and using these registers on load/store operations. If the register allocated by the compiler happens to be zero (r0), it might cause an invalid memory address access, since load and store operations consider the content of 0x0 address if the base register is r0, instead of the content of the r0 register. For example: r1 := 0xdeadbeef r0 := 0xdeadbeef ld r2, 0(1) /* will load into r2 the content of r1 address */ ld r2, 0(0) /* will load into r2 the content of 0x0 */ In order to avoid this possible problem, the inline assembly constraint should be aware that these registers will be used as a base register, thus, r0 should not be allocated. Other than that, this patch removes inline assembly operands that are not used by the tests. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/mm: Remove extern from function definitionBreno Leitao2018-11-252-6/+6
| | | | | | | | | | | | | | | | | Function huge_ptep_set_access_flags() has the 'extern' keyword in the function definition and also in the function declaration. This causes a warning in 'sparse' since the 'extern' storage class should not be used in the function definition. arch/powerpc/mm/pgtable.c:232:12: warning: function 'huge_ptep_set_access_flags' with external linkage has definition This patch removes the keyword from the definition part. It also removes the extern keyword from the declaration part, since checkpatch --strict complains about it. Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/pkey: Define functions as staticBreno Leitao2018-11-251-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | Sparse tool is showing some warnings on pkeys.c file, mainly related to storage class identifiers. There are static variables and functions not declared as such. The same thing happens with an extern function, which misses the header inclusion. arch/powerpc/mm/pkeys.c:14:6: warning: symbol 'pkey_execute_disable_supported' was not declared. Should it be static? arch/powerpc/mm/pkeys.c:16:6: warning: symbol 'pkeys_devtree_defined' was not declared. Should it be static? arch/powerpc/mm/pkeys.c:19:6: warning: symbol 'pkey_amr_mask' was not declared. Should it be static? arch/powerpc/mm/pkeys.c:20:6: warning: symbol 'pkey_iamr_mask' was not declared. Should it be static? arch/powerpc/mm/pkeys.c:21:6: warning: symbol 'pkey_uamor_mask' was not declared. Should it be static? arch/powerpc/mm/pkeys.c:22:6: warning: symbol 'execute_only_key' was not declared. Should it be static? arch/powerpc/mm/pkeys.c:60:5: warning: symbol 'pkey_initialize' was not declared. Should it be static? arch/powerpc/mm/pkeys.c:404:6: warning: symbol 'arch_vma_access_permitted' was not declared. Should it be static? This patch fix al the warning, basically turning all global variables that are not declared as extern at asm/pkeys.h into static. It also includes asm/mmu_context.h header, which contains the definition of arch_vma_access_permitted. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/perf: Declare static identifier a suchBreno Leitao2018-11-251-3/+3
| | | | | | | | | | | | | | | | There are three symbols (two variables and a function) that are being used solely in the same file (imc-pmu.c), thus, these symbols should be static, but they are not. This was detected by sparse: arch/powerpc/perf/imc-pmu.c:31:20: warning: symbol 'nest_imc_refc' was not declared. Should it be static? arch/powerpc/perf/imc-pmu.c:37:20: warning: symbol 'core_imc_refc' was not declared. Should it be static? arch/powerpc/perf/imc-pmu.c:46:16: warning: symbol 'imc_event_to_pmu' was not declared. Should it be static? This patch simply adds the 'static' storage-class definition to these symbols, thus, restricting their usage only in the imc-pmu.c file. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/scom: Return NULL instead of 0Breno Leitao2018-11-251-2/+2
| | | | | | | | | | | | | | Function scom_map_device() returns data type 'scom_map_t', which is a typedef for 'void *'. This functions is currently returning NULL and zero, which causes the following warning by 'sparse': arch/powerpc/sysdev/scom.c:63:24: warning: Using plain integer as NULL pointer arch/powerpc/sysdev/scom.c:86:24: warning: Using plain integer as NULL pointer This patch simply replaces zero by NULL. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/lib: Declare static methodsBreno Leitao2018-11-251-2/+2
| | | | | | | | | | | | | | | Functions do_stf_{entry,exit}_barrier_fixups are static but not declared as such. This was detected by `sparse` tool with the following warning: arch/powerpc/lib/feature-fixups.c:121:6: warning: symbol 'do_stf_entry_barrier_fixups' was not declared. Should it be static? arch/powerpc/lib/feature-fixups.c:171:6: warning: symbol 'do_stf_exit_barrier_fixups' was not declared. Should it be static? This patch declares both functions as static, as they are only called by do_stf_barrier_fixups(), which is in the same source code file. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/xmon: Define static functionsBreno Leitao2018-11-251-3/+3
| | | | | | | | | | | | | | | | | Currently sparse is complaining about three issues on the xmon code. Two storage classes issues and a dereferencing a 'noderef' pointer. These are the warnings: arch/powerpc/xmon/xmon.c:2783:1: warning: symbol 'dump_log_buf' was not declared. Should it be static? arch/powerpc/xmon/xmon.c:2989:6: warning: symbol 'format_pte' was not declared. Should it be static? arch/powerpc/xmon/xmon.c:2983:30: warning: dereference of noderef expression This patch fixes all of them, turning both functions static and dereferencing a pointer calling rcu_dereference() instead of a straightforward dereference. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/xive: Define xive_do_source_eoi as staticBreno Leitao2018-11-251-1/+1
| | | | | | | | | | | | Sparse shows that xive_do_source_eoi() file is defined without any declaration, thus, it should be a static function. arch/powerpc/sysdev/xive/common.c:312:6: warning: symbol 'xive_do_source_eoi' was not declared. Should it be static? This patch simply turns this symbol into static. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/eeh: Declare pci_ers_result_name() as staticBreno Leitao2018-11-251-1/+1
| | | | | | | | | | | | Function pci_ers_result_name() is a static function, although not declared as such. This was detected by sparse in the following warning arch/powerpc/kernel/eeh_driver.c:63:12: warning: symbol 'pci_ers_result_name' was not declared. Should it be static? This patch simply declares the function a static. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/64s: Include cpu headerBreno Leitao2018-11-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | Current powerpc security.c file is defining functions, as cpu_show_meltdown(), cpu_show_spectre_v{1,2} and others, that are being declared at linux/cpu.h header without including the header file that contains these declarations. This is being reported by sparse, which thinks that these functions are static, due to the lack of declaration: arch/powerpc/kernel/security.c:105:9: warning: symbol 'cpu_show_meltdown' was not declared. Should it be static? arch/powerpc/kernel/security.c:139:9: warning: symbol 'cpu_show_spectre_v1' was not declared. Should it be static? arch/powerpc/kernel/security.c:161:9: warning: symbol 'cpu_show_spectre_v2' was not declared. Should it be static? arch/powerpc/kernel/security.c:209:6: warning: symbol 'stf_barrier' was not declared. Should it be static? arch/powerpc/kernel/security.c:289:9: warning: symbol 'cpu_show_spec_store_bypass' was not declared. Should it be static? This patch simply includes the proper header (linux/cpu.h) to match function definition and declaration. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge branch 'fixes' into nextMichael Ellerman2018-11-2512-106/+76Star
|\ | | | | | | This contains a few must have fixes, like the stack alignment one.
| * selftests/powerpc: Adjust wild_bctr to build with old binutilsGustavo Romero2018-11-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the selftest wild_bctr can fail to build when an old gcc is used, notably on gcc using a binutils version <= 2.27, because the assembler does not support the integer suffix UL. This patch adjusts the wild_bctr test so the REG_POISON value is still treated as an unsigned long for the shifts on compilation but the UL suffix is absent on the stringification, so the inline asm code generated has no UL suffixes. Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> [mpe: Wrap long line] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/64: Fix kernel stack 16-byte alignmentNicholas Piggin2018-11-152-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8, which causes the interrupt frame allocation on kernel entry to put the kernel stack out of alignment. Quadword (16-byte) alignment for the stack is required by both the 64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1). Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this in future. Fixes: 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/numa: Suppress "VPHN is not supported" messagesSatheesh Rajendran2018-11-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * selftests/powerpc: Fix wild_bctr test to work on ppc64Michael Ellerman2018-11-121-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | The selftest I recently added to test branching to an out-of-bounds NIP doesn't work on 64-bit big endian. It does fail but not in the right way. That is it SEGVs trying to load from the opd at BAD_NIP, but it never gets as far as branching to BAD_NIP. To fix it we need to create an opd which is reachable but which holds the bad address. Fixes: b7683fc66eba ("selftests/powerpc: Add a test of wild bctr") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/io: Fix the IO workarounds code to work with RadixMichael Ellerman2018-11-121-13/+7Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back in 2006 Ben added some workarounds for a misbehaviour in the Spider IO bridge used on early Cell machines, see commit 014da7ff47b5 ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these were made to be generic, ie. not tied specifically to Spider. The code stashes a token in the high bits (59-48) of virtual addresses used for IO (eg. returned from ioremap()). This works fine when using the Hash MMU, but when we're using the Radix MMU the bits used for the token overlap with some of the bits of the virtual address. This is because the maximum virtual address is larger with Radix, up to c00fffffffffffff, and in fact we use that high part of the address range for ioremap(), see RADIX_KERN_IO_START. As it happens the bits that are used overlap with the bits that differentiate an IO address vs a linear map address. If the resulting address lies outside the linear mapping we will crash (see below), if not we just corrupt memory. virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000 Unable to handle kernel paging request for data at address 0xc000000080000014 ... CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000 GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030 ^^^^ ... NIP [c000000000626c5c] .iowrite8+0xec/0x100 LR [c0000000006c992c] .vp_reset+0x2c/0x90 Call Trace: .pci_bus_read_config_dword+0xc4/0x120 (unreliable) .register_virtio_device+0x13c/0x1c0 .virtio_pci_probe+0x148/0x1f0 .local_pci_probe+0x68/0x140 .pci_device_probe+0x164/0x220 .really_probe+0x274/0x3b0 .driver_probe_device+0x80/0x170 .__driver_attach+0x14c/0x150 .bus_for_each_dev+0xb8/0x130 .driver_attach+0x34/0x50 .bus_add_driver+0x178/0x2f0 .driver_register+0x90/0x1a0 .__pci_register_driver+0x6c/0x90 .virtio_pci_driver_init+0x2c/0x40 .do_one_initcall+0x64/0x280 .kernel_init_freeable+0x36c/0x474 .kernel_init+0x24/0x160 .ret_from_kernel_thread+0x58/0x7c This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which enables this code is usually not enabled. It is only enabled when it's selected by PPC_CELL_NATIVE which is only selected by PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order to hit the bug you need to build a big endian kernel, with IBM Cell Blade support enabled, as well as Radix MMU support, and then boot that on Power9 using Radix MMU. Still we can fix the bug, so let's do that. We simply use fewer bits for the token, taking the union of the restrictions on the address from both Hash and Radix, we end up with 8 bits we can use for the token. The only user of the token is iowa_mem_find_bus() which only supports 8 token values, so 8 bits is plenty for that. Fixes: 566ca99af026 ("powerpc/mm/radix: Add dummy radix_enabled()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/mm/64s: Fix preempt warning in slb_allocate_kernel()Michael Ellerman2018-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With preempt enabled we see warnings in do_slb_fault(): BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u33:0/98 futex hash table entries: 4096 (order: 3, 524288 bytes) caller is do_slb_fault+0x204/0x230 CPU: 5 PID: 98 Comm: kworker/u33:0 Not tainted 4.19.0-rc3-gcc-7.3.1-00022-g1936f094e164 #138 Call Trace: dump_stack+0xb4/0x104 (unreliable) check_preemption_disabled+0x148/0x150 do_slb_fault+0x204/0x230 data_access_slb_common+0x138/0x180 This is caused by the get_paca() in slb_allocate_kernel(), which includes a call to debug_smp_processor_id(). slb_allocate_kernel() can only be called from do_slb_fault(), and in that path interrupts are hard disabled and so we can't be preempted, but we can't update the preempt flags (in thread_info) because that could cause an SLB fault. So just use local_paca which is safe and doesn't cause the warning. Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILEScott Wood2018-11-074-8/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by <trace/define_trace.h>, so like that #include, they should be outside #ifdef protection. They also need to be #undefed before defining, in case multiple trace headers are included by the same C file. This became the case on book3e after commit cf4a6085151a ("powerpc/mm: Add missing tracepoint for tlbie"), leading to the following build error: CC arch/powerpc/kvm/powerpc.o In file included from arch/powerpc/kvm/powerpc.c:51:0: arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined [-Werror] #define TRACE_INCLUDE_PATH . ^ In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0, from arch/powerpc/kvm/powerpc.c:48: ./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of the previous definition #define TRACE_INCLUDE_PATH asm ^ cc1: all warnings being treated as errors Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/mm/64s: Only use slbfee on CPUs that support itMichael Ellerman2018-11-061-0/+3
| | | | | | | | | | | | | | | | | | The slbfee instruction was only added in ISA 2.05 (Power6), it's not supported on older CPUs. We don't have a CPU feature for that ISA version though, so just use the ISA 2.06 feature flag. Fixes: e15a4fea4dee ("powerpc/64s/hash: Add some SLB debugging tests") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/mm/64s: Use PPC_SLBFEE macroMichael Ellerman2018-11-062-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | Old toolchains don't know about slbfee and break the build, eg: {standard input}:37: Error: Unrecognized opcode: `slbfee.' Fix it by using the macro version. We need to add an underscore version that takes raw register numbers from the inline asm, rather than our Rx macros. Fixes: e15a4fea4dee ("powerpc/64s/hash: Add some SLB debugging tests") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/mm/64s: Consolidate SLB assertionsMichael Ellerman2018-11-061-20/+9Star
| | | | | | | | | | | | | | | | | | The code for assert_slb_exists() and assert_slb_notexists() is almost identical, except for the polarity of the WARN_ON(). In a future patch we'll need to modify this code, so consolidate it now into a single function. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/powernv/npu: Remove NPU DMA opsAlistair Popple2018-11-051-60/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NPU IOMMU is setup to mirror the parent PCIe device IOMMU setup. Therefore it does not make sense to call dma operations such as dma_map_page(), etc. directly on these devices. The existing dma_ops simply print a warning if they are ever called, however this is unnecessary and the warnings are likely to go unnoticed. It is instead simpler to remove these operations and let the generic DMA code print warnings (eg. via a NULL pointer deref) in cases of buggy drivers attempting dma operations on NVLink devices. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | Linux 4.20-rc2Linus Torvalds2018-11-121-1/+1
| |
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2018-11-1254-199/+430
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "One last pull request before heading to Vancouver for LPC, here we have: 1) Don't forget to free VSI contexts during ice driver unload, from Victor Raj. 2) Don't forget napi delete calls during device remove in ice driver, from Dave Ertman. 3) Don't request VLAN tag insertion of ibmvnic device when SKB doesn't have VLAN tags at all. 4) IPV4 frag handling code has to accomodate the situation where two threads try to insert the same fragment into the hash table at the same time. From Eric Dumazet. 5) Relatedly, don't flow separate on protocol ports for fragmented frames, also from Eric Dumazet. 6) Memory leaks in qed driver, from Denis Bolotin. 7) Correct valid MTU range in smsc95xx driver, from Stefan Wahren. 8) Validate cls_flower nested policies properly, from Jakub Kicinski. 9) Clearing of stats counters in mc88e6xxx driver doesn't retain important bits in the G1_STATS_OP register causing the chip to hang. Fix from Andrew Lunn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) act_mirred: clear skb->tstamp on redirect net: dsa: mv88e6xxx: Fix clearing of stats counters tipc: fix link re-establish failure net: sched: cls_flower: validate nested enc_opts_policy to avoid warning net: mvneta: correct typo flow_dissector: do not dissect l4 ports for fragments net: qualcomm: rmnet: Fix incorrect assignment of real_dev net: aquantia: allow rx checksum offload configuration net: aquantia: invalid checksumm offload implementation net: aquantia: fixed enable unicast on 32 macvlan net: aquantia: fix potential IOMMU fault after driver unbind net: aquantia: synchronized flow control between mac/phy net: smsc95xx: Fix MTU range net: stmmac: Fix RX packet size > 8191 qed: Fix potential memory corruption qed: Fix SPQ entries not returned to pool in error flows qed: Fix blocking/unlimited SPQ entries leak qed: Fix memory/entry leak in qed_init_sp_request() inet: frags: better deal with smp races net: hns3: bugfix for not checking return value ...
| * | act_mirred: clear skb->tstamp on redirectEric Dumazet2018-11-112-10/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If sch_fq is used at ingress, skbs that might have been timestamped by net_timestamp_set() if a packet capture is requesting timestamps could be delayed by arbitrary amount of time, since sch_fq time base is MONOTONIC. Fix this problem by moving code from sch_netem.c to act_mirred.c. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: dsa: mv88e6xxx: Fix clearing of stats countersAndrew Lunn2018-11-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mv88e6161 would sometime fail to probe with a timeout waiting for the switch to complete an operation. This operation is supposed to clear the statistics counters. However, due to a read/modify/write, without the needed mask, the operation actually carried out was more random, with invalid parameters, resulting in the switch not responding. We need to preserve the histogram mode bits, so apply a mask to keep them. Reported-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tipc: fix link re-establish failureJon Maloy2018-11-111-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a link failure is detected locally, the link is reset, the flag link->in_session is set to false, and a RESET_MSG with the 'stopping' bit set is sent to the peer. The purpose of this bit is to inform the peer that this endpoint just is going down, and that the peer should handle the reception of this particular RESET message as a local failure. This forces the peer to accept another RESET or ACTIVATE message from this endpoint before it can re-establish the link. This again is necessary to ensure that link session numbers are properly exchanged before the link comes up again. If a failure is detected locally at the same time at the peer endpoint this will do the same, which is also a correct behavior. However, when receiving such messages, the endpoints will not distinguish between 'stopping' RESETs and ordinary ones when it comes to updating session numbers. Both endpoints will copy the received session number and set their 'in_session' flags to true at the reception, while they are still expecting another RESET from the peer before they can go ahead and re-establish. This is contradictory, since, after applying the validation check referred to below, the 'in_session' flag will cause rejection of all such messages, and the link will never come up again. We now fix this by not only handling received RESET/STOPPING messages as a local failure, but also by omitting to set a new session number and the 'in_session' flag in such cases. Fixes: 7ea817f4e832 ("tipc: check session number before accepting link protocol messages") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: sched: cls_flower: validate nested enc_opts_policy to avoid warningJakub Kicinski2018-11-101-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only currently contain further nested attributes, which are parsed by hand, so the policy is never actually used resulting in a W=1 build warning: net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=] enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = { Add the validation anyway to avoid potential bugs when other attributes are added and to make the attribute structure slightly more clear. Validation will also set extact to point to bad attribute on error. Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: mvneta: correct typoAlexandre Belloni2018-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | | The reserved variable should be named reserved1. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | flow_dissector: do not dissect l4 ports for fragments배석진2018-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only first fragment has the sport/dport information, not the following ones. If we want consistent hash for all fragments, we need to ignore ports even for first fragment. This bug is visible for IPv6 traffic, if incoming fragments do not have a flow label, since skb_get_hash() will give different results for first fragment and following ones. It is also visible if any routing rule wants dissection and sport or dport. See commit 5e5d6fed3741 ("ipv6: route: dissect flow in input path if fib rules need it") for details. [edumazet] rewrote the changelog completely. Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: 배석진 <soukjin.bae@samsung.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: qualcomm: rmnet: Fix incorrect assignment of real_devSubash Abhinov Kasiviswanathan2018-11-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A null dereference was observed when a sysctl was being set from userspace and rmnet was stuck trying to complete some actions in the NETDEV_REGISTER callback. This is because the real_dev is set only after the device registration handler completes. sysctl call stack - <6> Unable to handle kernel NULL pointer dereference at virtual address 00000108 <2> pc : rmnet_vnd_get_iflink+0x1c/0x28 <2> lr : dev_get_iflink+0x2c/0x40 <2> rmnet_vnd_get_iflink+0x1c/0x28 <2> inet6_fill_ifinfo+0x15c/0x234 <2> inet6_ifinfo_notify+0x68/0xd4 <2> ndisc_ifinfo_sysctl_change+0x1b8/0x234 <2> proc_sys_call_handler+0xac/0x100 <2> proc_sys_write+0x3c/0x4c <2> __vfs_write+0x54/0x14c <2> vfs_write+0xcc/0x188 <2> SyS_write+0x60/0xc0 <2> el0_svc_naked+0x34/0x38 device register call stack - <2> notifier_call_chain+0x84/0xbc <2> raw_notifier_call_chain+0x38/0x48 <2> call_netdevice_notifiers_info+0x40/0x70 <2> call_netdevice_notifiers+0x38/0x60 <2> register_netdevice+0x29c/0x3d8 <2> rmnet_vnd_newlink+0x68/0xe8 <2> rmnet_newlink+0xa0/0x160 <2> rtnl_newlink+0x57c/0x6c8 <2> rtnetlink_rcv_msg+0x1dc/0x328 <2> netlink_rcv_skb+0xac/0x118 <2> rtnetlink_rcv+0x24/0x30 <2> netlink_unicast+0x158/0x1f0 <2> netlink_sendmsg+0x32c/0x338 <2> sock_sendmsg+0x44/0x60 <2> SyS_sendto+0x150/0x1ac <2> el0_svc_naked+0x34/0x38 Fixes: b752eff5be24 ("net: qualcomm: rmnet: Implement ndo_get_iflink") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-05 18:53:19 +0200