summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* libata: use ata_tag_internal() consistentlyJens Axboe2018-05-113-3/+3
| | | | | | | | Some check for the value directly, use the provided helper instead. Also make it return a bool, since that's what it does. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: bump ->qc_active to a 64-bit typeJens Axboe2018-05-115-13/+14
| | | | | | | | | | This is in preparation for allowing full usage of the tag space, which means that our reserved error handling command will be using an internal tag value of 32. This doesn't fit in a u32, so move to a u64. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: convert core and drivers to ->hw_tag usageJens Axboe2018-05-119-56/+56
| | | | | | | | Anything that goes to the hardware should use ->hw_tag, anything related to internal lookup should be using ->tag. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: introduce notion of separate hardware tagsJens Axboe2018-05-112-3/+4
| | | | | | | | Rigth now these are the same, but drivers should be using ->hw_tag for their command setup and issue. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: Fix command retry decisionDamien Le Moal2018-05-101-4/+8
| | | | | | | | | | | | | | For failed commands with valid sense data (e.g. NCQ commands), scsi_check_sense() is used in ata_analyze_tf() to determine if the command can be retried. In such case, rely on this decision and ignore the command error mask based decision done in ata_worth_retry(). This fixes useless retries of commands such as unaligned writes on zoned disks (TYPE_ZAC). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: Honor RQF_QUIET flagDamien Le Moal2018-05-102-1/+28
| | | | | | | | | | | | | | | | Currently, libata ignores requests RQF_QUIET flag and print error messages for failed commands, regardless if this flag is set in the command request. Fix this by introducing the ata_eh_quiet() function and using this function in ata_eh_link_autopsy() to determine if the EH context should be quiet. This works by counting the number of failed commands and the number of commands with the quiet flag set. If both numbers are equal, the the EH context can be set to quiet and all error messages suppressed. Otherwise, only the error messages for the failed commands are suppressed and the link Emask and irq_stat messages printed. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: Make ata_dev_set_mode() less verboseDamien Le Moal2018-05-101-3/+5
| | | | | | | | | | | | | | | | For a successful setting of the device transfer speed mode in ata_dev_set_mode(), do not print the message "ataX.XX: configured for xxx" if the EH context has the quiet flag set, unless the device port is being reset. This preserves the output of the message during device scan but removes it in the case of a simple device revalidation such as trigerred by enabling the NCQ I/O priority feature of the device e.g. echo 1 > /sys/block/sdxx/device/ncq_iprio_enable Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: Fix ata_err_string()Damien Le Moal2018-05-101-0/+4
| | | | | | | | | Add proper error string output for ATA_ERR_NCQ and ATA_ERR_NODEV_HINT instead of returning "unknown error". Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: Fix comment typo in ata_eh_analyze_tf()Damien Le Moal2018-05-101-2/+2
| | | | | | Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* sata_nv: don't use block layer bounce bufferChristoph Hellwig2018-05-101-38/+24Star
| | | | | | | | | sata_nv sets the block bounce limit to the reduce dma mask for ATAPI devices, which means that the iommu or swiotlb already take care of the bounce buffering, and the block bouncing can be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
* ata: hpt37x: Convert to use match_string() helperAndy Shevchenko2018-05-071-8/+5Star
| | | | | | | | The new helper returns index of the matching string in an array. We are going to use it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* Linux 4.17-rc4Linus Torvalds2018-05-071-2/+2
|
* Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2018-05-0610-85/+122
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pll KVM fixes from Radim Krčmář: "ARM: - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation x86: - Speed up injection of expired timers (for stable)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove APIC Timer periodic/oneshot spikes arm64: vgic-v2: Fix proxying of cpuif access KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance KVM: arm64: Fix order of vcpu_write_sys_reg() arguments KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI
| * KVM: x86: remove APIC Timer periodic/oneshot spikesAnthoine Bourgeois2018-05-051-17/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the commit "8003c9ae204e: add APIC Timer periodic/oneshot mode VMX preemption timer support", a Windows 10 guest has some erratic timer spikes. Here the results on a 150000 times 1ms timer without any load: Before 8003c9ae204e | After 8003c9ae204e Max 1834us | 86000us Mean 1100us | 1021us Deviation 59us | 149us Here the results on a 150000 times 1ms timer with a cpu-z stress test: Before 8003c9ae204e | After 8003c9ae204e Max 32000us | 140000us Mean 1006us | 1997us Deviation 140us | 11095us The root cause of the problem is starting hrtimer with an expiry time already in the past can take more than 20 milliseconds to trigger the timer function. It can be solved by forward such past timers immediately, rather than submitting them to hrtimer_start(). In case the timer is periodic, update the target expiration and call hrtimer_start with it. v2: Check if the tsc deadline is already expired. Thank you Mika. v3: Execute the past timers immediately rather than submitting them to hrtimer_start(). v4: Rearm the periodic timer with advance_periodic_target_expiration() a simpler version of set_target_expiration(). Thank you Paolo. Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com> 8003c9ae204e ("KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
| * Merge tag 'kvmarm-fixes-for-4.17-2' of ↵Radim Krčmář2018-05-059-68/+102
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/arm fixes for 4.17, take #2 - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation
| | * arm64: vgic-v2: Fix proxying of cpuif accessJames Morse2018-05-041-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Proxying the cpuif accesses at EL2 makes use of vcpu_data_guest_to_host and co, which check the endianness, which call into vcpu_read_sys_reg... which isn't mapped at EL2 (it was inlined before, and got moved OoL with the VHE optimizations). The result is of course a nice panic. Let's add some specialized cruft to keep the broken platforms that require this hack alive. But, this code used vcpu_data_guest_to_host(), which expected us to write the value to host memory, instead we have trapped the guest's read or write to an mmio-device, and are about to replay it using the host's readl()/writel() which also perform swabbing based on the host endianness. This goes wrong when both host and guest are big-endian, as readl()/writel() will undo the guest's swabbing, causing the big-endian value to be written to device-memory. What needs doing? A big-endian guest will have pre-swabbed data before storing, undo this. If its necessary for the host, writel() will re-swab it. For a read a big-endian guest expects to swab the data after the load. The hosts's readl() will correct for host endianness, giving us the device-memory's value in the register. For a big-endian guest, swab it as if we'd only done the load. For a little-endian guest, nothing needs doing as readl()/writel() leave the correct device-memory value in registers. Tested on Juno with that rarest of things: a big-endian 64K host. Based on a patch from Marc Zyngier. Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com> Fixes: bf8feb39642b ("arm64: KVM: vgic-v2: Add GICV access from HYP") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| | * KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenanceValentin Schneider2018-05-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One comment still mentioned process_maintenance operations after commit af0614991ab6 ("KVM: arm/arm64: vgic: Get rid of unnecessary process_maintenance operation") Update the comment to point to vgic_fold_lr_state instead, which is where maintenance interrupts are taken care of. Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| | * KVM: arm64: Fix order of vcpu_write_sys_reg() argumentsJames Morse2018-05-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A typo in kvm_vcpu_set_be()'s call: | vcpu_write_sys_reg(vcpu, SCTLR_EL1, sctlr) causes us to use the 32bit register value as an index into the sys_reg[] array, and sail off the end of the linear map when we try to bring up big-endian secondaries. | Unable to handle kernel paging request at virtual address ffff80098b982c00 | Mem abort info: | ESR = 0x96000045 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000045 | CM = 0, WnR = 1 | swapper pgtable: 4k pages, 48-bit VAs, pgdp = 000000002ea0571a | [ffff80098b982c00] pgd=00000009ffff8803, pud=0000000000000000 | Internal error: Oops: 96000045 [#1] PREEMPT SMP | Modules linked in: | CPU: 2 PID: 1561 Comm: kvm-vcpu-0 Not tainted 4.17.0-rc3-00001-ga912e2261ca6-dirty #1323 | Hardware name: ARM Juno development board (r1) (DT) | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : vcpu_write_sys_reg+0x50/0x134 | lr : vcpu_write_sys_reg+0x50/0x134 | Process kvm-vcpu-0 (pid: 1561, stack limit = 0x000000006df4728b) | Call trace: | vcpu_write_sys_reg+0x50/0x134 | kvm_psci_vcpu_on+0x14c/0x150 | kvm_psci_0_2_call+0x244/0x2a4 | kvm_hvc_call_handler+0x1cc/0x258 | handle_hvc+0x20/0x3c | handle_exit+0x130/0x1ec | kvm_arch_vcpu_ioctl_run+0x340/0x614 | kvm_vcpu_ioctl+0x4d0/0x840 | do_vfs_ioctl+0xc8/0x8d0 | ksys_ioctl+0x78/0xa8 | sys_ioctl+0xc/0x18 | el0_svc_naked+0x30/0x34 | Code: 73620291 604d00b0 00201891 1ab10194 (957a33f8) |---[ end trace 4b4a4f9628596602 ]--- Fix the order of the arguments. Fixes: 8d404c4c24613 ("KVM: arm64: Rewrite system register accessors to read/write functions") CC: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| | * KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGIMarc Zyngier2018-04-276-61/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we make sure we don't inject multiple instances of the same GICv2 SGI at the same time, we've made another bug more obvious: If we exit with an active SGI, we completely lose track of which vcpu it came from. On the next entry, we restore it with 0 as a source, and if that wasn't the right one, too bad. While this doesn't seem to trouble GIC-400, the architectural model gets offended and doesn't deactivate the interrupt on EOI. Another connected issue is that we will happilly make pending an interrupt from another vcpu, overriding the above zero with something that is just as inconsistent. Don't do that. The final issue is that we signal a maintenance interrupt when no pending interrupts are present in the LR. Assuming we've fixed the two issues above, we end-up in a situation where we keep exiting as soon as we've reached the active state, and not be able to inject the following pending. The fix comes in 3 parts: - GICv2 SGIs have their source vcpu saved if they are active on exit, and restored on entry - Multi-SGIs cannot go via the Pending+Active state, as this would corrupt the source field - Multi-SGIs are converted to using MI on EOI instead of NPIE Fixes: 16ca6a607d84bef0 ("KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid") Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | | Merge tag 'iommu-fixes-v4.17-rc4' of ↵Linus Torvalds2018-05-065-34/+37
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - fix a compile warning in the AMD IOMMU driver with irq remapping disabled - fix for VT-d interrupt remapping and invalidation size (caused a BUG_ON when trying to invalidate more than 4GB) - build fix and a regression fix for broken graphics with old DTS for the rockchip iommu driver - a revert in the PCI window reservation code which fixes a regression with VFIO. * tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: rockchip: fix building without CONFIG_OF iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb() iommu/vt-d: fix shift-out-of-bounds in bug checking iommu/dma: Move PCI window region reservation back into dma specific path. iommu/rockchip: Make clock handling optional iommu/amd: Hide unused iommu_table_lock iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()
| * | | iommu: rockchip: fix building without CONFIG_OFArnd Bergmann2018-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We get a build error when compiling the iommu driver without CONFIG_OF: drivers/iommu/rockchip-iommu.c: In function 'rk_iommu_of_xlate': drivers/iommu/rockchip-iommu.c:1101:2: error: implicit declaration of function 'of_dev_put'; did you mean 'of_node_put'? [-Werror=implicit-function-declaration] This replaces the of_dev_put() with the equivalent platform_device_put(). Fixes: 5fd577c3eac3 ("iommu/rockchip: Use OF_IOMMU to attach devices automatically") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * | | iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb()Joerg Roedel2018-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A misaligned address is only worth a warning, and not stopping the while execution path with a BUG_ON(). Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * | | iommu/vt-d: fix shift-out-of-bounds in bug checkingChangbin Du2018-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It allows to flush more than 4GB of device TLBs. So the mask should be 64bit wide. UBSAN captured this fault as below. [ 3.760024] ================================================================================ [ 3.768440] UBSAN: Undefined behaviour in drivers/iommu/dmar.c:1348:3 [ 3.774864] shift exponent 64 is too large for 32-bit type 'int' [ 3.780853] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 4.17.0-rc1+ #89 [ 3.788661] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 3.796034] Call Trace: [ 3.798472] <IRQ> [ 3.800479] dump_stack+0x90/0xfb [ 3.803787] ubsan_epilogue+0x9/0x40 [ 3.807353] __ubsan_handle_shift_out_of_bounds+0x10e/0x170 [ 3.812916] ? qi_flush_dev_iotlb+0x124/0x180 [ 3.817261] qi_flush_dev_iotlb+0x124/0x180 [ 3.821437] iommu_flush_dev_iotlb+0x94/0xf0 [ 3.825698] iommu_flush_iova+0x10b/0x1c0 [ 3.829699] ? fq_ring_free+0x1d0/0x1d0 [ 3.833527] iova_domain_flush+0x25/0x40 [ 3.837448] fq_flush_timeout+0x55/0x160 [ 3.841368] ? fq_ring_free+0x1d0/0x1d0 [ 3.845200] ? fq_ring_free+0x1d0/0x1d0 [ 3.849034] call_timer_fn+0xbe/0x310 [ 3.852696] ? fq_ring_free+0x1d0/0x1d0 [ 3.856530] run_timer_softirq+0x223/0x6e0 [ 3.860625] ? sched_clock+0x5/0x10 [ 3.864108] ? sched_clock+0x5/0x10 [ 3.867594] __do_softirq+0x1b5/0x6f5 [ 3.871250] irq_exit+0xd4/0x130 [ 3.874470] smp_apic_timer_interrupt+0xb8/0x2f0 [ 3.879075] apic_timer_interrupt+0xf/0x20 [ 3.883159] </IRQ> [ 3.885255] RIP: 0010:poll_idle+0x60/0xe7 [ 3.889252] RSP: 0018:ffffb1b201943e30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 3.896802] RAX: 0000000080200000 RBX: 000000000000008e RCX: 000000000000001f [ 3.903918] RDX: 0000000000000000 RSI: 000000002819aa06 RDI: 0000000000000000 [ 3.911031] RBP: ffff9e93c6b33280 R08: 00000010f717d567 R09: 000000000010d205 [ 3.918146] R10: ffffb1b201943df8 R11: 0000000000000001 R12: 00000000e01b169d [ 3.925260] R13: 0000000000000000 R14: ffffffffb12aa400 R15: 0000000000000000 [ 3.932382] cpuidle_enter_state+0xb4/0x470 [ 3.936558] do_idle+0x222/0x310 [ 3.939779] cpu_startup_entry+0x78/0x90 [ 3.943693] start_secondary+0x205/0x2e0 [ 3.947607] secondary_startup_64+0xa5/0xb0 [ 3.951783] ================================================================================ Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * | | iommu/dma: Move PCI window region reservation back into dma specific path.Shameer Kolothum2018-05-031-29/+25Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This pretty much reverts commit 273df9635385 ("iommu/dma: Make PCI window reservation generic") by moving the PCI window region reservation back into the dma specific path so that these regions doesn't get exposed via the IOMMU API interface. With this change, the vfio interface will report only iommu specific reserved regions to the user space. Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Fixes: 273df9635385 ('iommu/dma: Make PCI window reservation generic') Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * | | iommu/rockchip: Make clock handling optionalHeiko Stuebner2018-05-031-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iommu clocks are optional, so the driver should not fail if they are not present. Instead just set the number of clocks to 0, which the clk-blk APIs can handle just fine. Fixes: f2e3a5f557ad ("iommu/rockchip: Control clocks needed to access the IOMMU") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * | | iommu/amd: Hide unused iommu_table_lockArnd Bergmann2018-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The newly introduced lock is only used when CONFIG_IRQ_REMAP is enabled: drivers/iommu/amd_iommu.c:86:24: error: 'iommu_table_lock' defined but not used [-Werror=unused-variable] static DEFINE_SPINLOCK(iommu_table_lock); This moves the definition next to the user, within the #ifdef protected section of the file. Fixes: ea6166f4b83e ("iommu/amd: Split irq_lookup_table out of the amd_iommu_devtable_lock") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * | | iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()Jagannathan Raman2018-05-031-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noticed that the IRTE configured for guest OS kernel was over-written while the guest was running. As a result, vt-d Posted Interrupts configured for the guest are not being delivered directly, and instead bounces off the host. Every interrupt delivery takes a VM Exit. It was noticed that the following stack is doing the over-write: [ 147.463177] modify_irte+0x171/0x1f0 [ 147.463405] intel_ir_set_affinity+0x5c/0x80 [ 147.463641] msi_domain_set_affinity+0x32/0x90 [ 147.463881] irq_do_set_affinity+0x37/0xd0 [ 147.464125] irq_set_affinity_locked+0x9d/0xb0 [ 147.464374] __irq_set_affinity+0x42/0x70 [ 147.464627] write_irq_affinity.isra.5+0xe1/0x110 [ 147.464895] proc_reg_write+0x38/0x70 [ 147.465150] __vfs_write+0x36/0x180 [ 147.465408] ? handle_mm_fault+0xdf/0x200 [ 147.465671] ? _cond_resched+0x15/0x30 [ 147.465936] vfs_write+0xad/0x1a0 [ 147.466204] SyS_write+0x52/0xc0 [ 147.466472] do_syscall_64+0x74/0x1a0 [ 147.466744] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 reversing the sense of force check in intel_ir_reconfigure_irte() restores proper posted interrupt functionality Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Fixes: d491bdff888e ('iommu/vt-d: Reevaluate vector configuration on activate()') Signed-off-by: Joerg Roedel <jroedel@suse.de>
* | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2018-05-061-1/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "Unbreak the CPUID CPUID_8000_0008_EBX reload which got dropped when the evaluation of physical and virtual bits which uses the same CPUID leaf was moved out of get_cpu_cap()" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Restore CPUID_8000_0008_EBX reload
| * | | x86/cpu: Restore CPUID_8000_0008_EBX reloadThomas Gleixner2018-05-021-1/+5
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent commt which addresses the x86_phys_bits corruption with encrypted memory on CPUID reload after a microcode update lost the reload of CPUID_8000_0008_EBX as well. As a consequence IBRS and IBRS_FW are not longer detected Restore the behaviour by bringing the reload of CPUID_8000_0008_EBX back. This restore has a twist due to the convoluted way the cpuid analysis works: CPUID_8000_0008_EBX is used by AMD to enumerate IBRB, IBRS, STIBP. On Intel EBX is not used. But the speculation control code sets the AMD bits when running on Intel depending on the Intel specific speculation control bits. This was done to use the same bits for alternatives. The change which moved the 8000_0008 evaluation out of get_cpu_cap() broke this nasty scheme due to ordering. So that on Intel the store to CPUID_8000_0008_EBX clears the IBRB, IBRS, STIBP bits which had been set before by software. So the actual CPUID_8000_0008_EBX needs to go back to the place where it was and the phys/virt address space calculation cannot touch it. In hindsight this should have used completely synthetic bits for IBRB, IBRS, STIBP instead of reusing the AMD bits, but that's for 4.18. /me needs to find time to cleanup that steaming pile of ... Fixes: d94a155c59c9 ("x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption") Reported-by: Jörg Otte <jrg.otte@gmail.com> Reported-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: kirill.shutemov@linux.intel.com Cc: Borislav Petkov <bp@alien8.de Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1805021043510.1668@nanos.tec.linutronix.de
* | | Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2018-05-062-30/+55
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource fixes from Thomas Gleixner: "The recent addition of the early TSC clocksource breaks on machines which have an unstable TSC because in case that TSC is disabled, then the clocksource selection logic falls back to the early TSC which is obviously bogus. That also unearthed a few robustness issues in the clocksource derating code which are addressed as well" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Rework stale comment clocksource: Consistent de-rate when marking unstable x86/tsc: Fix mark_tsc_unstable() clocksource: Initialize cs->wd_list clocksource: Allow clocksource_mark_unstable() on unregistered clocksources x86/tsc: Always unregister clocksource_tsc_early
| * | | clocksource: Rework stale commentPeter Zijlstra2018-05-021-4/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AFAICS the hotplug code no longer uses this function. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20180430100344.656525644@infradead.org
| * | | clocksource: Consistent de-rate when marking unstablePeter Zijlstra2018-05-021-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a registered clocksource gets marked unstable the watchdog_kthread will de-rate and re-select the clocksource. Ensure it also de-rates when getting called on an unregistered clocksource. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.594904898@infradead.org
| * | | x86/tsc: Fix mark_tsc_unstable()Peter Zijlstra2018-05-021-7/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mark_tsc_unstable() also needs to affect tsc_early, Now that clocksource_mark_unstable() can be used on a clocksource irrespective of its registration state, use it on both tsc_early and tsc. This does however require cs->list to be initialized empty, otherwise it cannot tell the registation state before registation. Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Diego Viola <diego.viola@gmail.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.533326547@infradead.org
| * | | clocksource: Initialize cs->wd_listPeter Zijlstra2018-05-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of places relies on list_empty(&cs->wd_list), however the list_head does not get initialized. Do so upon registration, such that thereafter it is possible to rely on list_empty() correctly reflecting the list membership status. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Diego Viola <diego.viola@gmail.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20180430100344.472662715@infradead.org
| * | | clocksource: Allow clocksource_mark_unstable() on unregistered clocksourcesPeter Zijlstra2018-05-021-16/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because of how the code flips between tsc-early and tsc clocksources it might need to mark one or both unstable. The current code in mark_tsc_unstable() only worked because previously it registered the tsc clocksource once and then never touched it. Since it now unregisters the tsc-early clocksource, it needs to know if a clocksource got unregistered and the current cs->mult test doesn't work for that. Instead use list_empty(&cs->list) to test for registration. Furthermore, since clocksource_mark_unstable() needs to place the cs on the wd_list, it links the cs->list and cs->wd_list serialization. It must not see a clocsource registered (!empty cs->list) but already past dequeue_watchdog(). So place {en,de}queue{,_watchdog}() under the same lock. Provided cs->list is initialized to empty, this then allows us to unconditionally use clocksource_mark_unstable(), regardless of the registration state. Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Diego Viola <diego.viola@gmail.com> Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180502135312.GS12217@hirez.programming.kicks-ass.net
| * | | x86/tsc: Always unregister clocksource_tsc_earlyPeter Zijlstra2018-05-021-4/+6
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't leave the tsc-early clocksource registered if it errors out early. This was reported by Diego, who on his Core2 era machine got TSC invalidated while it was running with tsc-early (due to C-states). This results in keeping tsc-early with very bad effects. Reported-and-Tested-by: Diego Viola <diego.viola@gmail.com> Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.350507853@infradead.org
* | | Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2018-05-061-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix to prevent false positives in the spurious interrupt detector when more than a single demultiplex register is evaluated in the Qualcom irq combiner driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom: Fix check for spurious interrupts
| * | | irqchip/qcom: Fix check for spurious interruptsAgustin Vega-Frias2018-05-021-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the interrupts for a combiner span multiple registers it must be checked if any interrupts have been asserted on each register before checking for spurious interrupts. Checking each register seperately leads to false positive warnings. [ tglx: Massaged changelog ] Fixes: f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver") Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: timur@codeaurora.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1525184090-26143-1-git-send-email-agustinv@codeaurora.org
* | | Merge tag 'platform-drivers-x86-v4.17-2' of ↵Linus Torvalds2018-05-062-2/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: - We missed a case in the Dell config dependencies resulting in a possible bad configuration, resolve it by giving up on trying to keep DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS. - Fix a null pointer dereference at module unload for the asus-wireless driver. * tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Kconfig: Fix dell-laptop dependency chain. platform/x86: asus-wireless: Fix NULL pointer dereference
| * | | platform/x86: Kconfig: Fix dell-laptop dependency chain.Mario Limonciello2018-05-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Randy Dunlap: >> WARNING: unmet direct dependencies detected for DELL_SMBIOS >> Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && (DCDBAS [=m] || >> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n) >> Selected by [y]: >> - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && DMI [=y] >> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] || >> ACPI_VIDEO [=n]=n) >> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y] >> Right now it's possible to set dell laptop to compile in but this causes dell-smbios to compile in which breaks if dcdbas is a module. Dell laptop shouldn't select dell-smbios anymore, but depend on it. Fixes: 32d7b19bad96 (platform/x86: dell-smbios: Resolve dependency error on DCDBAS) Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
| * | | platform/x86: asus-wireless: Fix NULL pointer dereferenceJoão Paulo Rechi Vita2018-05-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the module is removed the led workqueue is destroyed in the remove callback, before the led device is unregistered from the led subsystem. This leads to a NULL pointer derefence when the led device is unregistered automatically later as part of the module removal cleanup. Bellow is the backtrace showing the problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __queue_work+0x8c/0x410 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015 RIP: 0010:__queue_work+0x8c/0x410 RSP: 0018:ffffbe8cc249fcd8 EFLAGS: 00010086 RAX: ffff992ac6810800 RBX: 0000000000000000 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff992ac6400e18 RBP: ffffbe8cc249fd18 R08: ffff992ac6400db0 R09: 0000000000000000 R10: 0000000000000040 R11: ffff992ac6400dd8 R12: 0000000000002000 R13: ffff992abd762e00 R14: ffff992abd763e38 R15: 000000000001ebe0 FS: 00007f318203e700(0000) GS:ffff992aced80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001c720e000 CR4: 00000000001406e0 Call Trace: queue_work_on+0x38/0x40 led_state_set+0x2c/0x40 [asus_wireless] led_set_brightness_nopm+0x14/0x40 led_set_brightness+0x37/0x60 led_trigger_set+0xfc/0x1d0 led_classdev_unregister+0x32/0xd0 devm_led_classdev_release+0x11/0x20 release_nodes+0x109/0x1f0 devres_release_all+0x3c/0x50 device_release_driver_internal+0x16d/0x220 driver_detach+0x3f/0x80 bus_remove_driver+0x55/0xd0 driver_unregister+0x2c/0x40 acpi_bus_unregister_driver+0x15/0x20 asus_wireless_driver_exit+0x10/0xb7c [asus_wireless] SyS_delete_module+0x1da/0x2b0 entry_SYSCALL_64_fastpath+0x24/0x87 RIP: 0033:0x7f3181b65fd7 RSP: 002b:00007ffe74bcbe18 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3181b65fd7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555ea2559258 RBP: 0000555ea25591f0 R08: 00007ffe74bcad91 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000003 R13: 00007ffe74bcae00 R14: 0000000000000000 R15: 0000555ea25591f0 Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7 RIP: __queue_work+0x8c/0x410 RSP: ffffbe8cc249fcd8 CR2: 0000000000000000 ---[ end trace 7aa4f4a232e9c39c ]--- Unregistering the led device on the remove callback before destroying the workqueue avoids this problem. https://bugzilla.kernel.org/show_bug.cgi?id=196097 Reported-by: Dun Hum <bitter.taste@gmx.com> Cc: stable@vger.kernel.org Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
* | | | Merge tag 'usb-4.17-rc4' of ↵Linus Torvalds2018-05-0617-58/+133
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver fixes for 4.17-rc4. The majority of them are some USB gadget fixes that missed my last pull request. The "largest" patch in here is a fix for the old visor driver that syzbot found 6 months or so ago and I finally remembered to fix it. All of these have been in linux-next with no reported issues" * tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: host: ehci: Use dma_pool_zalloc()" usb: typec: tps6598x: handle block reads separately with plain-I2C adapters usb: typec: tcpm: Release the role mux when exiting USB: Accept bulk endpoints with 1024-byte maxpacket xhci: Fix use-after-free in xhci_free_virt_device USB: serial: visor: handle potential invalid device configuration USB: serial: option: adding support for ublox R410M usb: musb: trace: fix NULL pointer dereference in musb_g_tx() usb: musb: host: fix potential NULL pointer dereference usb: gadget: composite Allow for larger configuration descriptors usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static usb: dwc2: pci: Fix error return code in dwc2_pci_probe() usb: dwc2: WA for Full speed ISOC IN in DDMA mode. usb: dwc2: dwc2_vbus_supply_init: fix error check usb: gadget: f_phonet: fix pn_net_xmit()'s return type
| * \ \ \ Merge tag 'usb-serial-4.17-rc4' of ↵Greg Kroah-Hartman2018-05-042-34/+40
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.17-rc4 Here's a fix for a long-standing issue in the visor driver, which could have security implications. Included is also a new modem device id. Both commits have been in linux-next for a couple of days with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * | | | USB: serial: visor: handle potential invalid device configurationGreg Kroah-Hartman2018-05-021-34/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we get an invalid device configuration from a palm 3 type device, we might incorrectly parse things, and we have the potential to crash in "interesting" ways. Fix this up by verifying the size of the configuration passed to us by the device, and only if it is correct, will we handle it. Note that this also fixes an information leak of slab data. Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ johan: add comment about the info leak ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * | | | USB: serial: option: adding support for ublox R410MSZ Lin (林上智)2018-05-021-0/+5
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ublox R410M PID 0x90b2 USB modem to option driver, this module supports LTE Cat M1 / NB1. Interface layout: 0: QCDM/DIAG 1: ADB 2: AT 3: RMNET Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * | | | Revert "usb: host: ehci: Use dma_pool_zalloc()"Greg Kroah-Hartman2018-05-042-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 22072e83ebd510fb6a090aef9d65ccfda9b1e7e4 as it is broken. Alan writes: What you can't see just from reading the patch is that in both cases (ehci->itd_pool and ehci->sitd_pool) there are two allocation paths -- the two branches of an "if" statement -- and only one of the paths calls dma_pool_[z]alloc. However, the memset is needed for both paths, and so it can't be eliminated. Given that it must be present, there's no advantage to calling dma_pool_zalloc rather than dma_pool_alloc. Reported-by: Erick Cafferata <erick@cafferata.me> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: typec: tps6598x: handle block reads separately with plain-I2C adaptersHeikki Krogerus2018-05-031-8/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the I2C adapter that the PD controller is attached to does not support SMBus protocol, the driver needs to handle block reads separately. The first byte returned in block read protocol will show the total number of bytes. It needs to be stripped away. This is handled separately in the driver only because right now we have no way of requesting the used protocol with regmap-i2c. This is in practice a workaround for what is really a problem in regmap-i2c. The other option would have been to register custom regmap, or not use regmap at all, however, since the solution is very simple, I choose to use it in this case for convenience. It is easy to remove once we figure out how to handle this kind of cases in regmap-i2c. Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: typec: tcpm: Release the role mux when exitingHeikki Krogerus2018-05-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ref count for the USB role switch device must be released after we are done using the switch. Fixes: c6962c29729c ("usb: typec: tcpm: Set USB role switch to device mode when configured as such") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | USB: Accept bulk endpoints with 1024-byte maxpacketAlan Stern2018-05-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some non-compliant high-speed USB devices have bulk endpoints with a 1024-byte maxpacket size. Although such endpoints don't work with xHCI host controllers, they do work with EHCI controllers. We used to accept these invalid sizes (with a warning), but we no longer do because of an unintentional change introduced by commit aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors"). This patch restores the old behavior, so that people with these peculiar devices can use them without patching their kernels by hand. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Elvinas <elvinas@veikia.lt> Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | xhci: Fix use-after-free in xhci_free_virt_deviceMathias Nyman2018-05-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; dev->udev will be true even if udev is freed because dev->udev is not set to NULL. set dev->udev pointer to NULL in xhci_free_dev() The original patch went to stable so this fix needs to be applied there as well. Fixes: a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: <stable@vger.kernel.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-05 01:49:46 +0200