summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] 4572/1: ep93xx: add cirrus logic edb9307 supportHerbert Valerio Riedel2007-10-133-0/+98
| | | | | | | | | | | This patch adds support for the Cirrus Logic EDB9307, an evaluation board based on the Cirrus Logic EP9307 SoC, which features amongst other things 64M RAM, 32M NOR flash, 3 USB host ports, audio in/out, two serial ports and a 10/100 ethernet interface. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding supportBen Dooks2007-10-133-0/+70
| | | | | | | | | | Fix the IRQ numbers of the CF and SDI interface on the S3C2412 and S3C2413. Add support to handle these IRQs properly and ensure that the SDI controller platform device is correctly renumbered. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32Uwe Kleine-König2007-10-138-74/+92
| | | | | | | As a consequence registers are now accessed with __raw_{read,write}[bl]. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4594/1: ns9xxx: use the new gpio functionsUwe Kleine-König2007-10-131-6/+6
| | | | | | | | | Up to now only board-a9m9750dev.c used GPIOs. It just wrote directly into the corresponding registers. Now it properly reserves the gpio and uses the API function to configure it. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4593/1: ns9xxx: implement generic clockeventsUwe Kleine-König2007-10-132-42/+109
| | | | | Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4592/1: ns9xxx: clocksource driverUwe Kleine-König2007-10-132-26/+43
| | | | | Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4591/1: ns9xxx: simplify REGSET, REGGET and introduce ..._IDX variantsUwe Kleine-König2007-10-132-13/+30
| | | | | | | | | | | | | | The semantic of the REGSET macros didn't change, but hopefully it's more obvious as it's now. REGGET is changed to return the unshifted value, analogous to REGSET. REGGETIM behaves as REGGET before. All callers changed. ..._IDX is used to work with registers that need a parameter like BBU_GCONFb1. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4590/1: ns9xxx: add gpio handling functionsUwe Kleine-König2007-10-134-1/+233
| | | | | | | | | | | This implementation conforms to the general GPIO API introduced in 2.6.21. This patch was signed-of by David Brownell before I exported the functions using EXPORT_SYMBOL. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4589/1: ns9xxx: acknowledge IRQ_EXT2 in the demux routine for FPGA irqsUwe Kleine-König2007-10-131-2/+7
| | | | | | | | The FPGA on the a9m9750dev board interrupts the CPU via EXT2. So to acknowledge any FPGA interrupt IRQ_EXT2 must be acknowledged. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Add missing entries to Documentation/arm/00-INDEXRob Landley2007-10-131-6/+16
| | | | | | | Add several missing entries to Documentation/arm/00-INDEX Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Add rtc-cmos driver for ISA-based footbridge platformsRussell King2007-10-131-1/+44
| | | | | | | | | ... but the rtc-cmos is rather broken; if PNP is enabled, it assumes that we have ACPI (!) which is quite bogus on these platforms - which may have ISAPNP but not ACPI. Something to be solved in the future. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Add fallocate syscall entryRussell King2007-10-132-0/+2
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4588/1: S3C2412: Sleep configuration updatesBen Dooks2007-10-131-2/+8
| | | | | | | Make the S3C2412 sleep configuration clearer. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4587/1: S3C24XX: Add magic number before resume codeBen Dooks2007-10-131-0/+8
| | | | | | | | | Add a magic number before the resume code so that a bootloader can check that there is an image to resume to. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4586/1: S3C2412: power register updatesBen Dooks2007-10-132-0/+7
| | | | | | | | Add the INFORM register block which are retained over sleep. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4585/1: Correctly identify the CPU architecture versionCatalin Marinas2007-10-131-4/+17
| | | | | | | | | | | The cpu_architecture() function in arch/arm/kernel/setup.c only works with cores produced by ARM Ltd. The more generic approach is to read the ID_MMFR0 register and check for the VMSA or PMSA version supported. With this patch, the ARM11MPCore would be reported as ARMv7 since its MMU is compatible with ARMv7. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4581/1: Fix the conditional execution of the NWFPE instructionsCatalin Marinas2007-10-131-11/+14
| | | | | | | | | | Starting with ARMv7-A, conditional execution of undefined instructions can trigger an exception even if the condition check fails. This patch modifies the NWFPE support to check the condition before emulating the instruction. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] unbalanced parenthesis fixMariusz Kozlowski2007-10-131-2/+2
| | | | | | | | Fix unbalanced parenthesis. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] cleanup struct irqaction initializersThomas Gleixner2007-10-131-1/+5
| | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] omap1/leds-innovator.c: remove dead codeAdrian Bunk2007-10-131-3/+0Star
| | | | | | | This patch removes dead code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] "extern inline" -> "static inline"Adrian Bunk2007-10-133-8/+8
| | | | | | | "extern inline" will have different semantics with gcc 4.3. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4539/1: clocksource and clockevents for at91rm9200David Brownell2007-10-132-65/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GENERIC_TIME and GENERIC_CLOCKEVENTS support for the at91rm9200. - Oneshot mode (used for NO_HZ and high res timers) uses the alarm to emulate a real oneshot timer; the trickiest bit is how to avoid some lowlevel races. Thanks to Remy Bohmer for various fixes to this code. - Tighten up periodic mode support using the PIT. - Streamline reads of the 32KHz counter. Thanks to Marc Pignat for some testing results: the CRTR register has *very* odd behavior. The reread appears to work around stranger glitches than just getting an old clock value (which would quickly self-correct). - Remove the rounding-up of tick_usec to 10.009 msec (32KiHz/100), since that no longer acts correct (time increases too fast). Note that the at91sam9 and at91x40 chips need other solutions, since they don't have the same system timer module. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Bill Gatliff <bgat@billgatliff.com> Acked-by:Remy Bohmer <linux@bohmer.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4566/1: s3c24xx: fix dma functions section mismatchKrzysztof Helt2007-10-135-5/+5
| | | | | | | | This patch removes section mismatches related to DMA functions. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4565/1: s3c2443: fix section mismatch in irq.c fileKrzysztof Helt2007-10-131-2/+2
| | | | | | | | This patch removes section mismatches related to irq functions. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4564/1: Add tagged list support for Acorn RiscPC's uncompress codeAlan Hourihane2007-10-131-15/+57
| | | | | | | | | | | arch_decomp_setup() does not understand the new tagged lists for parameter setup. It's fixed in using the older param struct. This patch adds support for tagged lists and allows the older param struct too. Signed-off-by: Alan Hourihane <alanh@fairlite.demon.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4545/1: ns9xxx: simplify irq ack'ingUwe Kleine-König2007-10-132-33/+14Star
| | | | | | | | | | Now the drivers are responsible to clear the irq in the respective device, which seems to be the normal thing to do. So the ack'ing of the timer irq moved to time.c. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4536/1: configure support for AT91x40 and EB01Greg Ungerer2007-10-131-0/+23
| | | | | | | | Configuration support for the AT91x40 CPU and EB01 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4537/1: build support for AT91x40 and EB01Greg Ungerer2007-10-131-1/+4
| | | | | | | | Makefile build support for the Atmel AT91x40 CPU and EB01 board support. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4538/1: Atmel EB01 board supportGreg Ungerer2007-10-131-0/+44
| | | | | | | | Support for the Atmel EB01 board (based on the Atmel AT91x40 CPU). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4535/1: AT91x40 function prototypesGreg Ungerer2007-10-131-0/+3
| | | | | | | | Prototypes for the at91x40 CPU support functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4534/1: AT91x40 interrupt supportGreg Ungerer2007-10-131-0/+67
| | | | | | | | Interrupt setup support for the Atmel AT91x40 CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4533/1: AT91x40 timer supportGreg Ungerer2007-10-131-0/+80
| | | | | | | | Support for the timers in the Atmel AT91x40 family of CPUs. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4532/1: allow configuration of processor IDGreg Ungerer2007-10-131-1/+1
| | | | | | | | Allow for configuration of the processor ID for the simplar non-MMU ARM parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'master' of ↵Linus Torvalds2007-10-12529-13476/+31125
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
| * [POWERPC] Add memchr() to the bootwrapperDavid Gibson2007-10-122-0/+14
| | | | | | | | | | | | | | | | This adds a memchr() implementation to the bootwrapper, which will be needed when libfdt is merged in. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Implement logging of unhandled signalsOlof Johansson2007-10-125-2/+71
| | | | | | | | | | | | | | | | | | | | Implement show_unhandled_signals sysctl + support to print when a process is killed due to unhandled signals just as i386 and x86_64 does. Default to having it off, unlike x86 that defaults on. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Add legacy serial support for OPB with flattened device treeValentine Barshak2007-10-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently find_legacy_serial_ports() can find no serial ports on the OPB with flattened device tree. Thus no legacy boot console can be initialized. Just the early udbg console works, which is initialized with udbg_init_44x_as1 on the UART's physical address specified in kernel config. This happens because we look for ns16750 serial devices only and expect opb node to have a device type property. This patch makes it look for ns16550-compatible devices and use of_device_is_compatible() for opb in case device type is not specified. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Use 1TB segmentsPaul Mackerras2007-10-1223-258/+513
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] XilinxFB: Allow fixed framebuffer base addressGrant Likely2007-10-122-6/+21
| | | | | | | | | | | | | | | | Allow a fixed framebuffer address to be assigned to the framebuffer device instead of allocating the framebuffer from the consistent memory pool. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] XilinxFB: Add support for custom screen resolutionGrant Likely2007-10-122-28/+49
| | | | | | | | | | | | | | | | | | Some custom implementations of the xilinx fb can use resolutions other than 640x480. This patch allows the resolution to be specified in the device tree or the xilinx_platform_data structure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] XilinxFB: Use pdata to pass around framebuffer parametersGrant Likely2007-10-121-20/+23
| | | | | | | | | | | | | | | | | | | | The call to xilinxfb_assign is getting unwieldy when adding features to the Xilinx framebuffer driver. Change xilinxfb_assign() to accept a pointer to a xilinxfb_platform_data structure to prepare for adding additition configuration options. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pciValentine Barshak2007-10-122-3/+6
| | | | | | | | | | | | | | | | Add 64-bit physical address support to setup_indirect_pci(). Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * Merge branch 'for-2.6.24' of ↵Paul Mackerras2007-10-1221-334/+259Star
| |\ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24
| | * [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capableKumar Gala2007-10-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All ppc32 systems except PReP and 8xx are capable of handling 3G of user address space. Old legacy had set this to 2GB and no one has bothered to fix it. 8xx could be bumped up to 3GB if its SW TLB miss handlers were fixed up to properly determine kernel/user addresses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB ↵Kumar Gala2007-10-114-22/+19Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | handlers Move to using PAGE_OFFSET instead of TASK_SIZE or KERNELBASE value on 6xx/40x/44x/fsl-booke to determine if the faulting address is a kernel or user space address. This mimics how the macro is_kernel_addr() works. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfigKumar Gala2007-10-111-5/+18
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * [POWERPC] 85xx: Killed <asm/mpc85xx.h>Kumar Gala2007-10-1110-189/+13Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | asm-powerpc/mpc85xx.h was really a hold over from arch/ppc. Now that more decoupling has occurred we can remove <asm/mpc85xx.h> and some of its legacy. As part of this we moved the definition of CPM_MAP_ADDR into cpm2.h for 85xx platforms. This is a stop gap until drivers stop using CPM_MAP_ADDR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDSScott Wood2007-10-112-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | We don't use any CPM devices on these boards, but the muram node on these chips is different from the 8560, so it's helpful to people working with custom boards based on these chips. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.Scott Wood2007-10-113-116/+134
| | | | | | | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * [POWERPC] mpc8272ads: Remove muram from the CPM reg property.Scott Wood2007-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | This is described by the muram node now. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-11-14 04:14:57 +0100