summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mfd: Update MAINTAINERS patterns for WM831xMark Brown2009-09-171-0/+2
| | | | | | | The WM831x PMICs added a backlight driver and a new include directory. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Fix twl4030-power warningsSamuel Ortiz2009-09-171-4/+4
| | | | | | KEY_1 and KEY_2 definitions conflicts with include/linux/input.h Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: AB3100 supportLinus Walleij2009-09-175-0/+736
| | | | | | | | | | | | | | | | This adds support for the regulators found in the AB3100 Mixed-Signal IC. It further also defines platform data for the ST-Ericsson U300 platform and extends the AB3100 MFD driver so that platform/board data with regulation constraints and an init function can be passed down all the way from the board to the regulators. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* rtc: AB3100 RTC supportLinus Walleij2009-09-173-0/+291
| | | | | | | | | | This adds support for the RTC found inside the AB3100 Mixed Signal chip. The symbols used for communicating with the chip is found in the mfd/ab3100-core.c driver that also provides the platform device. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Fix ab3100-otp build failureSamuel Ortiz2009-09-172-1/+1
| | | | | | ab3100.h should include linux/workqueue.h for otp to build properly. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 boardAmit Kucheria2009-09-171-2/+120
| | | | | | | | | | | Add support for Dynamic Power Switching (DPS) for the RX51 board. These scripts are still a work-in-progress. I'll keep sending patches to update the scripts as they are optimised. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Print warning for twl4030 out-of-order script loadingAmit Kucheria2009-09-171-0/+6
| | | | | | | | | | | | | | | | | When the sleep script is loaded before the wakeup script, there is a chance that the system might go to sleep before the wakeup script loading is completed. This will lead to a system that does not wakeup and has been observed to cause non-booting boards. Various options were considered to solve this problem, including modification of the core twl4030 power code to be smart enough to reorder the loading of the scripts. But it felt too over-engineered. Hence this patch just warns the DPS script developer so that they may be reordered in the board-code itself. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add support for TWL4030/5030 dynamic power switchingAmit Kucheria2009-09-175-10/+574
| | | | | | | | | | | | | The TWL4030/5030 family of multifunction devices allows board-specific control of the the various regulators, clock and reset lines through 'scripts' that are loaded into its memory. This allows for Dynamic Power Switching (DPS). Implement board-independent core support for DPS that is then used by board-specific code to load custom DPS scripts. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: AB3100 OTP readoutLinus Walleij2009-09-173-0/+278
| | | | | | | | | | | | This adds the ability to read out OTP (One-Time Programmable) registers in the AB3100 MFD ASIC. It's a simple sysfs file you can cat to prompt. The OTP registers of the AB3100 are used to store various device-unique information such as customer ID, product flags and the 3GPP standard IMEI (International Mobile Equipment Indentity) number. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: Add Freescale MC13783 driverSascha Hauer2009-09-173-0/+419
| | | | | | | | | | | This driver provides basic support for the voltage regulators integrated into the Freescale MC13783 PMIC. It is currently only possible to enable/disable outputs, not to actually set the voltage. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add Freescale MC13783 driverSascha Hauer2009-09-175-0/+919
| | | | | | | | | This driver provides the core Freescale MC13783 support. It registers the client platform_devices and provides access to the A/D converter. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: AB3100 disable irq nosyncLinus Walleij2009-09-171-1/+1
| | | | | | | | | This will make the worker fire interrupt disable the AB3100 IRQ without sync which resolves a race since the interrupt obviously cannot wait for itself to complete while being handled. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: AB3100 alter default settingLinus Walleij2009-09-171-1/+1
| | | | | | | | | This alters the default setting for AB3100_IMRB1 from 0xff to 0xbf. These registers are used for the yet unimplemented ADC and this new setting will deactivate ADC Trigger 1. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: AB3100 propagate errorLinus Walleij2009-09-171-1/+1
| | | | | | | | | This makes ab3100_set_register_interruptible() propagate the error code from suboperations properly so it can be handles properly. (A special case comes from signal interruption.) Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: AB3100 accessor function cleanupsLinus Walleij2009-09-172-23/+28
| | | | | | | | | | | | | This adds the _interruptible suffix to the AB3100 accessor functions on par with mutex_lock_interruptible() that's used for blocking simultaneous calls to the AB3100 acessor functions. Since these accesses are slow on a 100kHz I2C bus and may line up waiting for the mutex, we need to handle interruption by system shutdown or kill signals and may just as well denote that in the function names. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* rtc: Add support for RTCs on Wolfson WM831x devicesMark Brown2009-09-173-0/+534
| | | | | | | | | | | | | | | | | | | | | | The WM831x series of PMICs contain RTC functionality. The hardware provides a 32 bit counter incrementing at 1Hz together with a per tick interrupt and an alarm value. For simplicity the driver chooses to define the epoch for the counter as the Unix epoch - if required platform data can be used in future to customise this. When powered on from a completely cold state the RTC reports that it has not been configured - when this happens an error is returned when attempting to read the RTC in order to avoid use of values we know to be invalid. The hardware also provides security features which mean that it can ignore attempts to set the RTC time in certain circumstances, most notably if the RTC is written to too often. These errors are detected by verifying the written RTC value. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: get pcap data from the parent deviceAntonio Ospite2009-09-171-1/+1
| | | | | | | | | | | Right now the pcap core driver passes a reference to its pcap data abusing the subdrivers platform drvdata, this is not good. Get the reference directly from the parent device. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* input: PCAP2 misc input driverDaniel Ribeiro2009-09-173-0/+156
| | | | | | | | | | | This is a driver for misc input events for the PCAP2 PMIC, it handles the Power key and the Headphone button. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Ilya Petrov <ilya.muromec@gmail.com> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* input: PCAP2 based touchscreen driverDaniel Ribeiro2009-09-173-0/+281
| | | | | | | | | | | Touchscreen driver for the PCAP2 multi function device used in Motorola EZX smartphones. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: register pcap earlierAntonio Ospite2009-09-171-1/+1
| | | | | | | | | Register pcap-regulator earlier so it can be used with cpufreq Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: Add WM831x ISINK supportMark Brown2009-09-172-0/+261
| | | | | | | | | | The WM831x series of PMICs provide two constant current sinks designed to drive strings of serially connected LEDs for applications such as backlights. This driver adds support for those regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: Add WM831x DC-DC boost convertor supportMark Brown2009-09-171-0/+131
| | | | | | | | | The WM831x series of PMICs include a single DC-DC boost convertor. This adds basic support for this convertor. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: Add WM831x EPE supportMark Brown2009-09-171-0/+88
| | | | | | | | | | | | The WM831x series of PMICs provide two optional outputs for controlling external devices during power sequencing, for example an external regulator. While in essence these are GPIOs the hardware presents them as DCDCs with very little control so provide support via the regulator API in that fashion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: Add WM831x LDO supportMark Brown2009-09-173-0/+1479
| | | | | | | | | | | | | | | | | | The WM831x series of devices provide three types of LDO: - General purpose LDOs supporting voltages from 0.9-3.3V - High performance analogue LDOs supporting voltages from 1-3.5V - Very low power consumption LDOs intended to support always on functionality. This patch adds support for all three kinds of LDO. Each regulator is probed as an individual platform device with resources used to provide the register map location of the regulator. Mixed hardware and software control of regulators is not current supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: Add WM831x DC-DC buck convertor supportMark Brown2009-09-174-0/+1222
| | | | | | | | | | | | The WM831x series of devices all have 3 DC-DC buck convertors. This driver implements software control for these regulators via the regulator API. Use with split hardware/software control of individual regulators is not supported, though regulators not controlled by software may be controlled via the hardware control interfaces. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: Provide mode to status conversion functionMark Brown2009-09-172-0/+26
| | | | | | | This is useful for implementing get_status() in terms of get_mode(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* input: Add support for the WM831x ON pinMark Brown2009-09-174-0/+193
| | | | | | | | | | The WM831x series of PMICs support control of initial power on through the ON pin on the device with soft control of the pin at other times. Represent this to userspace as KEY_POWER. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* hwmon: WM831x PMIC hardware monitoring driverMark Brown2009-09-174-0/+275
| | | | | | | | | | | | | | | | | | | This driver adds support for the hardware monitoring features of the WM831x PMICs to the hwmon API. Monitoring is provided for the system voltages supported natively by the WM831x, the chip temperature, the battery temperature and the auxiliary inputs of the WM831x. Currently no alarms are supported, though digital comparators on the WM831x devices would allow these to be provided. Since the auxiliary and battery temperature input scaling depends on the system configuration the value is reported as a voltage to userspace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: Add WM831X GPIO driverMark Brown2009-09-174-0/+315
| | | | | | | | | | | | | | | | Add support for the GPIO pins on the WM831x. No direct support is currently supplied for configuring non-gpiolib functionality such as pull configuration and alternate functions, soft configuration of these will be provided in a future patch. Currently use of these pins as interrupts is not supported due to the ongoing issues with generic irq not support interrupt controllers on interrupt driven buses. Users can directly request the interrupts with the wm831x-specific APIs currently provided if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Hook WM831x into build systemMark Brown2009-09-172-0/+12
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Export ISEL values from WM831x coreMark Brown2009-09-172-0/+85
| | | | | | | | | | | The current settings which can be used with the WM831x current sinks can't easily be mapped between register values and currents at run time without a lookup table since the values scale logarithmically to match the way the human eye interprets brightness. This lookup table is inclided in the core since several drivers need to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add basic WM831x OTP supportMark Brown2009-09-173-0/+249
| | | | | | | | | | | | | | The WM831x series of devices use OTP (One Time Programmable, a type of PROM) to store system configuration. At run time this data is visible via registers. Currently the only explicitly supported feature is that the unique ID provided by every WM831x device is exported to user space via sysfs. Other configuration data may be read by system-specific code in the pre_init() and post_init() platform data operations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Conditionally add WM831x backlight subdeviceMark Brown2009-09-172-0/+21
| | | | | | | | | | | The WM831x backlight driver requires at least the specification of the current sink to use and a maximum current to allow them to function and will actively interfere with other users of the regulators it uses if misconfigured so only register the subdevice for it if this platform data has been supplied. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add WM831x AUXADC supportMark Brown2009-09-173-0/+319
| | | | | | | | | | | | | | | | | The WM831x contains an auxiliary ADC with a number of switchable inputs which is used to monitor some of the voltages and temperatures in the system and has some external inputs which can be used for machine specific purposes. Provide an API allowing drivers to read values from the ADC. An internal reference voltage is provided to allow callibration of the ADC. This is used to calibrate the device at startup. The hardware also supports continuous readings and digital comparators. These are not yet supported by the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add WM831x interrupt supportMark Brown2009-09-174-2/+1354
| | | | | | | | | | | | | | | | The WM831x includes an interrupt controller managing interrupts for the various functions on the chip. This patch adds support for the core interrupt block on the device. Ideally this would be supported by genirq, particularly for the GPIOs, but currently genirq is unable to cope with controllers on interrupt driven buses so we cut'n'paste the generic interface. Once genirq is able to cope chips like this it should be a case of filing the prefixes off the code and redoing wm831x-irq.c to move over. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Initial core support for WM831x series devicesMark Brown2009-09-173-0/+1711
| | | | | | | | | | | | | | The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Allow multiple MFD cells with the same nameMark Brown2009-09-172-1/+2
| | | | | | | | | | | | | | | Provide basic support for MFDs having multiple cells of a given type with different IDs by adding an id to the mfd_cell structure and then adding that to the id passed in to mfd_add_devices(). As it stands this approach requires that MFDs using this feature deal with ensuring that there aren't any ID collisions resulting from multiple MFDs of the same type being instantiated. This needs to happen with the existing code too, but with this approach there is a knock on effect on the IDs for non-duplicated devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: register ezx-pcap earlierAntonio Ospite2009-09-171-1/+1
| | | | | | | | | Register ezx-pcap earlier so it can be used with cpufreq Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Remove VIB defines from pcap header fileDaniel Ribeiro2009-09-171-4/+0Star
| | | | | | | | Vibrator will be accessed via the pcap-regulator driver, no need to expose its bits in the header file. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Correct ro and cd implemantion on DM355Vipin Bhandari2009-09-171-2/+10
| | | | | | | | | | | | | | | | | | | | This patch corrects the support for MMCSD card detection and read only feature for SoC DM355. EVMDM355_ECP_VA4.pdf, from Spectrum digital, suggests that Bit 2 and 4 should be checked for card detection. However on the EVM, bits 1 and 3 gives this status, for MMC/SD instance 0 and 1 respectively. The pdf also suggests that Bit 1 and 3 should be checked for write protection. However on the EVM bits 2 and 4 gives this status. This document can be downloaded from http://c6000.spectrumdigital.com/evmdm355/reve/files/EVMDM355_ECP_VA4.pdf Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: fix wrong define for 10bit pcf50633 ADC modePaul Fertser2009-09-171-1/+2
| | | | | | | The 10 bits definition was the 8 bits one. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: revise locking for pcf50633 ADCPaul Fertser2009-09-171-16/+16
| | | | | | | | | | | | | | Current implementation is prone to races, this patch attempts to remove all but one (in pcf50633_adc_sync_read). The idea is that we need to guard the queue access only on inserting and removing items. If we insert and there're no more items in the queue it means that the last irq already happened and we need to trigger ADC manually. If not, then the next conversion will be triggered by the irq handler upon completion of the previous. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: use a dedicated workqueue for pcf50633 irq processingPaul Fertser2009-09-172-1/+5
| | | | | | | | | | | | | | Using the default kernel "events" workqueue causes problems with synchronous adc readings if initiated from some task on the same workqueue. I had a deadlock trying to use pcf50633_adc_sync_read from a power_supply class driver because the reading was initiated from the workqueue and it waited for the irq processing to complete (to get the result) and that was put on the same workqueue. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add twl4030-pwrbutton as a twl4030 childFelipe Balbi2009-09-171-0/+13
| | | | | | | | | Make that twl4030-pwrbutton.c driver probe with current child creation api for twl4030. Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* hwmon: Add WM835x PMIC hardware monitoring driverMark Brown2009-09-176-0/+197
| | | | | | | | | This driver provides reporting of the status supply voltage rails of the WM835x series of PMICs via the hwmon API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* regulator: add pcap driverDaniel Ribeiro2009-09-173-0/+326
| | | | | | | | Add (partial) support for the voltage regulators on the PCAP2 PMIC. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* MAINTAINERS: Add entry for Wolfson PMIC driversMark Brown2009-09-171-0/+18
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: remove unnecessary semicolons from twl4030Joe Perches2009-09-171-1/+1
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: add ezx_pcap_setbitsDaniel Ribeiro2009-09-172-0/+24
| | | | | | | | Provides an atomic set_bits functions, as needed by the pcap-regulator driver. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: fix pcap irq bottom handlerDaniel Ribeiro2009-09-171-22/+27
| | | | | | | | Mask interrupts before servicing them and loop while pcap asserts the interrupt line. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-28 17:59:03 +0200