summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* net/mlx4_en: Fill all counters under one call of stats lockEran Ben Elisha2017-12-131-26/+31
| | | | | | | | | | | | | | | Before this patch, the stats_lock was acquired twice. In between the locks Driver sent command to gather some more statistics (per priority and counter statistics). If the stats lock was acquired by get statistics NDO in between we would have report out of sync counters. Fix this by collecting all stats from Firmware in advance and then fill the Software structs under one lock. Fixes: 0b131561a7d6 ("net/mlx4_en: Add Flow control statistics display via ethtool") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Fix wrong calculation of free countersEran Ben Elisha2017-12-131-1/+0Star
| | | | | | | | | | | | | | | | The field res_free indicates the total number of counters which are available for allocation (reserved and unreserved). Fixed a bug where the reserved counters were subtracted from res_free before any allocation was performed. Before this fix, free counters which were not reserved could not be allocated. Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Fix selftest for small MTUsEugenia Emantayev2017-12-132-1/+4
| | | | | | | | | | | Set the minimal MTU threshold for running loopback selftest. MTU should be big enough to include packet payload, NET_IP_ALIGN, Ethernet headers and preamble length. Fixes: e7c1c2c46201 ("mlx4_en: Added self diagnostics test implementation") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: marvell: avoid configuring fiber page for SGMII-to-CopperRussell King2017-12-131-0/+4
| | | | | | | | | | When in SGMII-to-Copper mode, the fiber page is used for the MAC facing link, and does not require configuration of the fiber auto-negotiation settings. Avoid trying. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc-xlgmac: Add co-maintainerJie Deng2017-12-131-0/+1
| | | | | | | | | Jose Abreu will join to maintain dwc-xlgmac. He will help with new feature development for this driver. Thanks Jose and welcome on board! Signed-off-by: Jie Deng <jiedeng@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: refresh tcp_mstamp from timers callbacksEric Dumazet2017-12-131-0/+2
| | | | | | | | | | | | | | | | | | | Only the retransmit timer currently refreshes tcp_mstamp We should do the same for delayed acks and keepalives. Even if RFC 7323 does not request it, this is consistent to what linux did in the past, when TS values were based on jiffies. Fixes: 385e20706fac ("tcp: use tp->tcp_mstamp in output path") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Mike Maloney <maloney@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: fix potential underestimation on rcv_rttWei Wang2017-12-131-4/+6
| | | | | | | | | | | | | When ms timestamp is used, current logic uses 1us in tcp_rcv_rtt_update() when the real rcv_rtt is within 1 - 999us. This could cause rcv_rtt underestimation. Fix it by always using a min value of 1ms if ms timestamp is used. Fixes: 645f4c6f2ebd ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* skge: remove redundunt free_irq under spinlockStephen Hemminger2017-12-131-1/+0Star
| | | | | | | | The code to handle multi-port SKGE boards was freeing IRQ twice. The first one was under lock and might sleep. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: meson-gxl: make function meson_gxl_read_status staticColin Ian King2017-12-131-1/+1
| | | | | | | | | | | | The function meson_gxl_read_status is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'meson_gxl_read_status' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* of_mdio / mdiobus: ensure mdio devices have fwnode correctly populatedRussell King2017-12-132-0/+4
| | | | | | | | | | | Ensure that all mdio devices populate the struct device fwnode pointer as well as the of_node pointer to allow drivers that wish to use fwnode APIs to work. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: fix resume handlingRussell King2017-12-133-14/+9Star
| | | | | | | | | | | | | | | | | | | | When a PHY has the BMCR_PDOWN bit set, it may decide to ignore writes to other registers, or reset the registers to power-on defaults. Micrel PHYs do this for their interrupt registers. The current structure of phylib tries to enable interrupts before resuming (and releasing) the BMCR_PDOWN bit. This fails, causing Micrel PHYs to stop working after a suspend/resume sequence if they are using interrupts. Fix this by ensuring that the PHY driver resume methods do not take the phydev->lock mutex themselves, but the callers of phy_resume() take that lock. This then allows us to move the call to phy_resume() before we enable interrupts in phy_start(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* ARM: dts: vf610-zii-dev: use XAUI for DSA link portsRussell King2017-12-131-2/+2
| | | | | | | | | | Use XAUI rather than XGMII for DSA link ports, as this is the interface mode that the switches actually use. XAUI is the 4 lane bus with clock per direction, whereas XGMII is a 32 bit bus with clock. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: allow XAUI phy interface modeRussell King2017-12-131-0/+1
| | | | | | | | | | | | | XGMII is a 32-bit bus plus two clock signals per direction. XAUI is four serial lanes per direction. The 88e6190 supports XAUI but not XGMII as it doesn't have enough pins. The same is true of 88e6176. Match on PHY_INTERFACE_MODE_XAUI for the XAUI port type, but keep accepting XGMII for backwards compatibility. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* hippi: Fix a Fix a possible sleep-in-atomic bug in rr_closeJia-Ju Bai2017-12-131-1/+1
| | | | | | | | | | | | | | The driver may sleep under a spinlock. The function call path is: rr_close (acquire the spinlock) free_irq --> may sleep To fix it, free_irq is moved to the place without holding the spinlock. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2017-12-1316-38/+170
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter fixes for net The follow patchset contains Netfilter fixes for your net tree, they are: 1) Fix compilation warning in x_tables with clang due to useless redundant reassignment, from Colin Ian King. 2) Add bugtrap to net_exit to catch uninitialized lists, patch from Vasily Averin. 3) Fix out of bounds memory reads in H323 conntrack helper, this comes with an initial patch to remove replace the obscure CHECK_BOUND macro as a dependency. From Eric Sesterhenn. 4) Reduce retransmission timeout when window is 0 in TCP conntrack, from Florian Westphal. 6) ctnetlink clamp timeout to INT_MAX if timeout is too large, otherwise timeout wraps around and it results in killing the entry that is being added immediately. 7) Missing CAP_NET_ADMIN checks in cthelper and xt_osf, due to no netns support. From Kevin Cernekee. 8) Missing maximum number of instructions checks in xt_bpf, patch from Jann Horn. 9) With no CONFIG_PROC_FS ipt_CLUSTERIP compilation breaks, patch from Arnd Bergmann. 10) Missing netlink attribute policy in nftables exthdr, from Florian Westphal. 11) Enable conntrack with IPv6 MASQUERADE rules, as a357b3f80bc8 should have done in first place, from Konstantin Khlebnikov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * netfilter: ip6t_MASQUERADE: add dependency on conntrack moduleKonstantin Khlebnikov2017-12-111-1/+7
| | | | | | | | | | | | | | | | | | | | After commit 4d3a57f23dec ("netfilter: conntrack: do not enable connection tracking unless needed") conntrack is disabled by default unless some module explicitly declares dependency in particular network namespace. Fixes: a357b3f80bc8 ("netfilter: nat: add dependencies on conntrack module") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: exthdr: add missign attributes to policyFlorian Westphal2017-12-111-0/+2
| | | | | | | | | | | | | | Add missing netlink attribute policy. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: ipt_CLUSTERIP: fix clusterip_net_exit build regressionArnd Bergmann2017-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The added check produces a build error when CONFIG_PROC_FS is disabled: net/ipv4/netfilter/ipt_CLUSTERIP.c: In function 'clusterip_net_exit': net/ipv4/netfilter/ipt_CLUSTERIP.c:822:28: error: 'cn' undeclared (first use in this function) This moves the variable declaration out of the #ifdef to make it available to the WARN_ON_ONCE(). Fixes: 613d0776d3fe ("netfilter: exit_net cleanup check added") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: xt_osf: Add missing permission checksKevin Cernekee2017-12-061-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The capability check in nfnetlink_rcv() verifies that the caller has CAP_NET_ADMIN in the namespace that "owns" the netlink socket. However, xt_osf_fingers is shared by all net namespaces on the system. An unprivileged user can create user and net namespaces in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable() check: vpnns -- nfnl_osf -f /tmp/pf.os vpnns -- nfnl_osf -f /tmp/pf.os -d These non-root operations successfully modify the systemwide OS fingerprint list. Add new capable() checks so that they can't. Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: xt_bpf: add overflow checksJann Horn2017-12-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check whether inputs from userspace are too long (explicit length field too big or string not null-terminated) to avoid out-of-bounds reads. As far as I can tell, this can at worst lead to very limited kernel heap memory disclosure or oopses. This bug can be triggered by an unprivileged user even if the xt_bpf module is not loaded: iptables is available in network namespaces, and the xt_bpf module can be autoloaded. Triggering the bug with a classic BPF filter with fake length 0x1000 causes the following KASAN report: ================================================================== BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0 Read of size 32768 at addr ffff8801eff2c494 by task test/4627 CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1 [...] Call Trace: dump_stack+0x5c/0x85 print_address_description+0x6a/0x260 kasan_report+0x254/0x370 ? bpf_prog_create+0x84/0xf0 memcpy+0x1f/0x50 bpf_prog_create+0x84/0xf0 bpf_mt_check+0x90/0xd6 [xt_bpf] [...] Allocated by task 4627: kasan_kmalloc+0xa0/0xd0 __kmalloc_node+0x47/0x60 xt_alloc_table_info+0x41/0x70 [x_tables] [...] The buggy address belongs to the object at ffff8801eff2c3c0 which belongs to the cache kmalloc-2048 of size 2048 The buggy address is located 212 bytes inside of 2048-byte region [ffff8801eff2c3c0, ffff8801eff2cbc0) [...] ================================================================== Fixes: e6f30c731718 ("netfilter: x_tables: add xt_bpf match") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: nfnetlink_cthelper: Add missing permission checksKevin Cernekee2017-12-041-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The capability check in nfnetlink_rcv() verifies that the caller has CAP_NET_ADMIN in the namespace that "owns" the netlink socket. However, nfnl_cthelper_list is shared by all net namespaces on the system. An unprivileged user can create user and net namespaces in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable() check: $ nfct helper list nfct v1.4.4: netlink error: Operation not permitted $ vpnns -- nfct helper list { .name = ftp, .queuenum = 0, .l3protonum = 2, .l4protonum = 6, .priv_data_len = 24, .status = enabled, }; Add capable() checks in nfnetlink_cthelper, as this is cleaner than trying to generalize the solution. Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: conntrack: clamp timeouts to INT_MAXJay Elliott2017-11-281-3/+9
| | | | | | | | | | | | | | | | | | | | | | When the conntracking code multiplies a timeout by HZ, it can overflow from positive to negative; this causes it to instantly expire. To protect against this the multiplication is done in 64-bit so we can prevent it from exceeding INT_MAX. Signed-off-by: Jay Elliott <jelliott@arista.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: conntrack: lower timeout to RETRANS seconds if window is 0Florian Westphal2017-11-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When zero window is announced we can get into a situation where connection stays around forever: 1. One side announces zero window. 2. Other side closes. In this case, no FIN is sent (stuck in send queue). Unless other side opens the window up again conntrack stays in ESTABLISHED state for a very long time. Lets alleviate this by lowering the timeout to RETRANS (5 minutes), the other end should be sending zero window probes to keep the connection established as long as a socket still exists. Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: nf_ct_h323: Extend nf_h323_error_boundary to work on bits as wellEric Sesterhenn2017-11-201-30/+62
| | | | | | | | | | | | | | | | | | This patch fixes several out of bounds memory reads by extending the nf_h323_error_boundary() function to work on bits as well an check the affected parts. Signed-off-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: nf_ct_h323: Convert CHECK_BOUND macro to functionEric Sesterhenn2017-11-201-29/+65
| | | | | | | | | | | | | | | | It is bad practive to return in a macro, this patch moves the check into a function. Signed-off-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: exit_net cleanup check addedVasily Averin2017-11-205-0/+27
| | | | | | | | | | | | | | | | Be sure that lists initialized in net_init hook was return to initial state. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: remove redundant assignment to eColin Ian King2017-11-203-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | The assignment to variable e is redundant since the same assignment occurs just a few lines later, hence it can be removed. Cleans up clang warning for arp_tables, ip_tables and ip6_tables: warning: Value stored to 'e' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | net: ethernet: arc: fix error handling in emac_rockchip_probeBranislav Radocaj2017-12-131-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Changes since v2 [1]: * Merged with latest code changes Changes since v1: Update made thanks to David's review, much appreciated David. * Improved inconsistent failure handling of clock rate setting * For completeness of usecase, added arc_emac_probe error handling Signed-off-by: Branislav Radocaj <branislav@radocaj.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: qmi_wwan: add Sierra EM7565 1199:9091Sebastian Sjoholm2017-12-131-0/+1
| | | | | | | | | | | | | | | | | | | | Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem. The USB id is added to qmi_wwan.c to allow QMI communication with the EM7565. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: igmp: Use correct source address on IGMPv3 reportsKevin Cernekee2017-12-131-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Closing a multicast socket after the final IPv4 address is deleted from an interface can generate a membership report that uses the source IP from a different interface. The following test script, run from an isolated netns, reproduces the issue: #!/bin/bash ip link add dummy0 type dummy ip link add dummy1 type dummy ip link set dummy0 up ip link set dummy1 up ip addr add 10.1.1.1/24 dev dummy0 ip addr add 192.168.99.99/24 dev dummy1 tcpdump -U -i dummy0 & socat EXEC:"sleep 2" \ UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 & sleep 1 ip addr del 10.1.1.1/24 dev dummy0 sleep 5 kill %tcpdump RFC 3376 specifies that the report must be sent with a valid IP source address from the destination subnet, or from address 0.0.0.0. Add an extra check to make sure this is the case. Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tipc: eliminate potential memory leakJon Maloy2017-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | In the function tipc_sk_mcast_rcv() we call refcount_dec(&skb->users) on received sk_buffers. Since the reference counter might hit zero at this point, we have a potential memory leak. We fix this by replacing refcount_dec() with kfree_skb(). Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: remove duplicate includesPravin Shedge2017-12-137-7/+0Star
| | | | | | | | | | | | | | | | | | These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv4: igmp: guard against silly MTU valuesEric Dumazet2017-12-134-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: mcast: better catch silly mtu valuesEric Dumazet2017-12-131-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzkaller reported crashes in IPv6 stack [1] Xin Long found that lo MTU was set to silly values. IPv6 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in mld code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv6 minimal MTU. [1] skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801db307508 EFLAGS: 00010286 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540 FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:109 [inline] skb_put+0x181/0x1c0 net/core/skbuff.c:1694 add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695 add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817 mld_send_cr net/ipv6/mcast.c:1903 [inline] mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448 call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x29d/0xbb2 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d3/0x210 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Revert "ravb: add workaround for clock when resuming with WoL enabled"Geert Uytterhoeven2017-12-131-25/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit fbf3d034f2ff6264183cfa6845770e8cc2a986c8. As of commit 560869100b99a3da ("clk: renesas: cpg-mssr: Restore module clocks during resume"), the workaround is no longer needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp md5sig: Use skb's saddr when replying to an incoming segmentChristoph Paasch2017-12-122-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f9722922 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | fou: fix some member types in guehdrXin Long2017-12-111-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | guehdr struct is used to build or parse gue packets, which are always in big endian. It's better to define all guehdr members as __beXX types. Also, in validate_gue_flags it's not good to use a __be32 variable for both Standard flags(__be16) and Private flags (__be32), and pass it to other funcions. This patch could fix a bunch of sparse warnings from fou. Fixes: 5024c33ac354 ("gue: Add infrastructure for flags and options") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: make sure stream nums can match optlen in sctp_setsockopt_reset_streamsXin Long2017-12-111-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now in sctp_setsockopt_reset_streams, it only does the check optlen < sizeof(*params) for optlen. But it's not enough, as params->srs_number_streams should also match optlen. If the streams in params->srs_stream_list are less than stream nums in params->srs_number_streams, later when dereferencing the stream list, it could cause a slab-out-of-bounds crash, as reported by syzbot. This patch is to fix it by also checking the stream numbers in sctp_setsockopt_reset_streams to make sure at least it's not greater than the streams in the list. Fixes: 7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ipv4: fix for a race condition in raw_sendmsgMohamed Ghannam2017-12-111-5/+10
| | | | | | | | | | | | | | | | | | | | inet->hdrincl is racy, and could lead to uninitialized stack pointer usage, so its value should be read only once. Fixes: c008ba5bdc9f ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt") Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlink: Add netns check on tapsKevin Cernekee2017-12-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, a nlmon link inside a child namespace can observe systemwide netlink activity. Filter the traffic so that nlmon can only sniff netlink messages from its own netns. Test case: vpnns -- bash -c "ip link add nlmon0 type nlmon; \ ip link set nlmon0 up; \ tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" & sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \ spi 0x1 mode transport \ auth sha1 0x6162633132330000000000000000000000000000 \ enc aes 0x00000000000000000000000000000000 grep --binary abc123 /tmp/nlmon.pcap Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sh_eth: do not advertise Gigabit capabilities when not availableThomas Petazzoni2017-12-111-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all variants of the sh_eth hardware have Gigabit support. Unfortunately, the current driver doesn't tell the PHY about the limited MAC capabilities. Due to this, if you have a Gigabit capable PHY, the PHY will advertise its Gigabit capability and establish a link at 1Gbit/s, even though the MAC doesn't support it. In order to avoid this, we use the recently introduced phy_set_max_speed() to tell the PHY to not advertise speed higher than 100 MBit/s. Tested on a SH7786 platform, with a Gigabit PHY. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: meson-gxl: detect LPA corruptionJerome Brunet2017-12-111-1/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The purpose of this change is to fix the incorrect detection of the link partner (LP) advertised capabilities which sometimes happens with this PHY (roughly 1 time in a dozen) This issue may cause the link to be negotiated at 10Mbps/Full or 10Mbps/Half when 100MBps/Full is actually possible. In some case, the link is even completely broken and no communication is possible. To detect the corruption, we must look for a magic undocumented bit in the WOL bank (hint given by the SoC vendor kernel) but this is not enough to cover all cases. We also have to look at the LPA ack. If the LP supports Aneg but did not ack our base code when aneg is completed, we assume something went wrong. The detection of a corrupted LPA triggers a restart of the aneg process. This solves the problem but may take up to 6 retries to complete. Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ptr_ring: add barriersMichael S. Tsirkin2017-12-111-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Users of ptr_ring expect that it's safe to give the data structure a pointer and have it be available to consumers, but that actually requires an smb_wmb or a stronger barrier. In absence of such barriers and on architectures that reorder writes, consumer might read an un=initialized value from an skb pointer stored in the skb array. This was observed causing crashes. To fix, add memory barriers. The barrier we use is a wmb, the assumption being that producers do not need to read the value so we do not need to order these reads. Reported-by: George Cherian <george.cherian@cavium.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'mac80211-for-davem-2017-12-11' of ↵David S. Miller2017-12-112-13/+40
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three fixes: * for certificate C file generation, don't use hexdump as it's not always installed by default, use pure posix instead (od/sed) * for certificate C file generation, don't write the file if anything fails, so the build abort will not cause a bad build upon a second attempt * fix locking in ieee80211_sta_tear_down_BA_sessions() which had been causing lots of locking warnings ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | mac80211: fix locking in ieee80211_sta_tear_down_BA_sessionsJohannes Berg2017-12-111-3/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to overlap between commit 1281103770e9 ("mac80211: Simplify locking in ieee80211_sta_tear_down_BA_sessions()") and the way that Luca modified commit 72e2c3438ba3 ("mac80211: tear down RX aggregations first") when sending it upstream from Intel's internal tree, we get the following warning: WARNING: CPU: 0 PID: 5472 at net/mac80211/agg-tx.c:315 ___ieee80211_stop_tx_ba_session+0x158/0x1f0 since there's no appropriate locking around the call to ___ieee80211_stop_tx_ba_session; Sara's original just had a call to the locked __ieee80211_stop_tx_ba_session (one less underscore) but it looks like Luca modified both of the calls when fixing it up for upstream, leading to the problem at hand. Move the locking appropriately to fix this problem. Reported-by: Kalle Valo <kvalo@codeaurora.org> Reported-by: Pavel Machek <pavel@ucw.cz> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wireless: don't write C files on failuresJohannes Berg2017-12-061-10/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the scripting inside the shipped/extra certs C code generation to not write the file when there are any failures. That way, if the build aborts due to failures, we don't get into a situation where a dummy file has been created and the next build succeeds, but not with the desired output. Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wireless: replace usage of hexdump with od/sedJohannes Berg2017-12-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Since od/sed are in posix, hopefully there's a better chance people will have them, over hexdump. Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | kmemcheck: rip it out for realMichal Hocko2017-12-0813-13/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4675ff05de2d ("kmemcheck: rip it out") has removed the code but for some reason SPDX header stayed in place. This looks like a rebase mistake in the mmotm tree or the merge mistake. Let's drop those leftovers as well. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2017-12-08113-367/+1052
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb drivers). 2) Revert returning -EEXIST from __dev_alloc_name() as this propagates to userspace and broke some apps. From Johannes Berg. 3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong Wang. 4) Gianfar MAC can't do EEE so don't advertise it by default, from Claudiu Manoil. 5) Relax strict netlink attribute validation, but emit a warning. From David Ahern. 6) Fix regression in checksum offload of thunderx driver, from Florian Westphal. 7) Fix UAPI bpf issues on s390, from Hendrik Brueckner. 8) New card support in iwlwifi, from Ihab Zhaika. 9) BBR congestion control bug fixes from Neal Cardwell. 10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren. 11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan. 12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni. 13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) net: mvpp2: fix the RSS table entry offset tcp: evaluate packet losses upon RTT change tcp: fix off-by-one bug in RACK tcp: always evaluate losses in RACK upon undo tcp: correctly test congestion state in RACK bnxt_en: Fix sources of spurious netpoll warnings tcp_bbr: reset long-term bandwidth sampling on loss recovery undo tcp_bbr: reset full pipe detection on loss recovery undo tcp_bbr: record "full bw reached" decision in new full_bw_reached bit sfc: pass valid pointers from efx_enqueue_unwind gianfar: Disable EEE autoneg by default tcp: invalidate rate samples during SACK reneging can: peak/pcie_fd: fix potential bug in restarting tx queue can: usb_8dev: cancel urb on -EPIPE and -EPROTO can: kvaser_usb: cancel urb on -EPIPE and -EPROTO can: esd_usb2: cancel urb on -EPIPE and -EPROTO can: ems_usb: cancel urb on -EPIPE and -EPROTO can: mcba_usb: cancel urb on -EPROTO usbnet: fix alignment for frames with no ethernet header tcp: use current time in tcp_rcv_space_adjust() ...
| * \ \ Merge tag 'linux-can-fixes-for-4.15-20171208' of ↵David S. Miller2017-12-086-6/+12
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-12-08 this is a pull request of 6 patches for net/master. Martin Kelly provides 5 patches for various USB based CAN drivers, that properly cancel the URBs on adapter unplug, so that the driver doesn't end up in an endless loop. Stephane Grosjean provides a patch to restart the tx queue if zero length packages are transmitted. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-09-18 22:48:04 +0200