summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* netfilter: nf_tables: reject loops from set element jump to chainPablo Neira Ayuso2016-06-154-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Liping Zhang says: "Users may add such a wrong nft rules successfully, which will cause an endless jump loop: # nft add rule filter test tcp dport vmap {1: jump test} This is because before we commit, the element in the current anonymous set is inactive, so osp->walk will skip this element and miss the validate check." To resolve this problem, this patch passes the generation mask to the walk function through the iter container structure depending on the code path: 1) If we're dumping the elements, then we have to check if the element is active in the current generation. Thus, we check for the current bit in the genmask. 2) If we're checking for loops, then we have to check if the element is active in the next generation, as we're in the middle of a transaction. Thus, we check for the next bit in the genmask. Based on original patch from Liping Zhang. Reported-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Tested-by: Liping Zhang <liping.zhang@spreadtrum.com>
* netfilter: nf_tables: fix wrong check of NFT_SET_MAP in nf_tables_bind_setLiping Zhang2016-06-151-1/+1
| | | | | | | | We should check "i" is used as a dictionary or not, "binding" is already checked before. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* netfilter: conntrack: destroy kmemcache on module removalFlorian Westphal2016-06-151-0/+2
| | | | | | | | I forgot to move the kmem_cache_destroy into the exit path. Fixes: 0c5366b3a8c7 ("netfilter: conntrack: use single slab cache) Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* Merge branch 'ovs-notifications'David S. Miller2016-06-153-30/+56
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nicolas Dichtel says: ==================== ovs: fix rtnl notifications on interface deletion There was no rtnl notifications for interfaces (gre, vxlan, geneve) created by ovs. This problem is fixed by adjusting the creation path. v1 -> v2: - add patch #1 and #4 - rework error handling in patch #2 ==================== Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ovs/geneve: fix rtnl notifications on iface deletionNicolas Dichtel2016-06-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function geneve_dev_create_fb() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.") CC: Pravin B Shelar <pshelar@nicira.com> CC: Jesse Gross <jesse@nicira.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ovs/gre: fix rtnl notifications on iface deletionNicolas Dichtel2016-06-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The function gretap_fb_dev_create() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Fixes: b2acd1dc3949 ("openvswitch: Use regular GRE net_device instead of vport") CC: Thomas Graf <tgraf@suug.ch> CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ovs/vxlan: fix rtnl notifications on iface deletionNicolas Dichtel2016-06-151-24/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function vxlan_dev_create() (only used by ovs) never calls rtnl_configure_link(). The consequence is that dev->rtnl_link_state is never set to RTNL_LINK_INITIALIZED. During the deletion phase, the function rollback_registered_many() sends a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED. Note that the function vxlan_dev_create() is moved after the rtnl stuff so that vxlan_dellink() can be called in this function. Fixes: dcc38c033b32 ("openvswitch: Re-add CONFIG_OPENVSWITCH_VXLAN") CC: Thomas Graf <tgraf@suug.ch> CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ovs/gre,geneve: fix error path when creating an ifaceNicolas Dichtel2016-06-152-6/+14
|/ | | | | | | | | After ipgre_newlink()/geneve_configure() call, the netdev is registered. Fixes: 7e059158d57b ("vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices") CC: David Wragg <david@weave.works> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp reuseport: fix packet of same flow hashed to different socketSu, Xuemin2016-06-142-112/+32Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a corner case in which udp packets belonging to a same flow are hashed to different socket when hslot->count changes from 10 to 11: 1) When hslot->count <= 10, __udp_lib_lookup() searches udp_table->hash, and always passes 'daddr' to udp_ehashfn(). 2) When hslot->count > 10, __udp_lib_lookup() searches udp_table->hash2, but may pass 'INADDR_ANY' to udp_ehashfn() if the sockets are bound to INADDR_ANY instead of some specific addr. That means when hslot->count changes from 10 to 11, the hash calculated by udp_ehashfn() is also changed, and the udp packets belonging to a same flow will be hashed to different socket. This is easily reproduced: 1) Create 10 udp sockets and bind all of them to 0.0.0.0:40000. 2) From the same host send udp packets to 127.0.0.1:40000, record the socket index which receives the packets. 3) Create 1 more udp socket and bind it to 0.0.0.0:44096. The number 44096 is 40000 + UDP_HASH_SIZE(4096), this makes the new socket put into the same hslot as the aformentioned 10 sockets, and makes the hslot->count change from 10 to 11. 4) From the same host send udp packets to 127.0.0.1:40000, and the socket index which receives the packets will be different from the one received in step 2. This should not happen as the socket bound to 0.0.0.0:44096 should not change the behavior of the sockets bound to 0.0.0.0:40000. It's the same case for IPv6, and this patch also fixes that. Signed-off-by: Su, Xuemin <suxm@chinanetcenter.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: fix pfifo_head_drop behavior vs backlogEric Dumazet2016-06-141-0/+4
| | | | | | | | | | | | | | | When the qdisc is full, we drop a packet at the head of the queue, queue the current skb and return NET_XMIT_CN Now we track backlog on upper qdiscs, we need to call qdisc_tree_reduce_backlog(), even if the qlen did not change. Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: alx: Work around the DMA RX overflow issueFeng Tang2016-06-142-51/+14Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 26c5f03 uses a new skb allocator to avoid the RFD overflow issue. But from debugging without datasheet, we found the error always happen when the DMA RX address is set to 0x....fc0, which is very likely to be a HW/silicon problem. So one idea is instead of adding a new allocator, why not just hitting the right target by avaiding the error-prone DMA address? This patch will actually * Remove the commit 26c5f03 * Apply rx skb with 64 bytes longer space, and if the allocated skb has a 0x...fc0 address, it will use skb_resever(skb, 64) to advance the address, so that the RX overflow can be avoided. In theory this method should also apply to atl1c driver, which I can't find anyone who can help to test on real devices. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Eric Dumazet <edumazet@google.com> Tested-by: Ole Lukoie <olelukoie@mail.ru> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: fix checksum annotation in udp4_csum_initHannes Frederic Sowa2016-06-141-2/+5
| | | | | | | | | Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Tom Herbert <tom@herbertland.com> Fixes: 4068579e1e098fa ("net: Implmement RFC 6936 (zero RX csums for UDP/IPv6") Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: fix checksum annotation in udp6_csum_initHannes Frederic Sowa2016-06-141-2/+5
| | | | | | | Cc: Tom Herbert <tom@herbertland.com> Fixes: 4068579e1e098fa ("net: Implmement RFC 6936 (zero RX csums for UDP/IPv6") Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: tcp: fix endianness annotation in tcp_v6_send_responseHannes Frederic Sowa2016-06-141-2/+2
| | | | | | | Cc: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Fixes: 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: fix endianness error in icmpv6_errHannes Frederic Sowa2016-06-141-1/+1
| | | | | | | | | | | IPv6 ping socket error handler doesn't correctly convert the new 32 bit mtu to host endianness before using. Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 6d0bfe22611602f ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: marvell: fix LED configuration via marvell,reg-initClemens Gruber2016-06-141-12/+26
| | | | | | | | | | | | | | Configuring the PHY LED registers for the Marvell 88E1510 and others is not possible, because regardless of the values in marvell,reg-init, it is later overridden in m88e1121_config_aneg with a non-standard default. This patch moves that default configuration to .config_init to allow setting the LED configuration through marvell,reg-init in the device tree, which should override said default if it exists. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: use destroy ctlr to destroy channelsIvan Khoronzhuk2016-06-131-4/+0Star
| | | | | | | | | | There is no reason to destroy channels that are destroyed while cpdma_ctlr destroy. In this case no need to remember how much channels where created and destroy them by one, as cpdma_ctlr destroys all of them. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: prio: properly report out of memory errorsEric Dumazet2016-06-131-20/+12Star
| | | | | | | | | | | | | | | At Qdisc creation or change time, prio_tune() creates missing pfifo qdiscs but does not return an error code if one qdisc could not be allocated. Leaving a qdisc in non operational state without telling user anything about this problem is not good. Also, testing if we replace something different than noop_qdisc a second time makes no sense so I removed useless code. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipconfig: Protect ic_addrservaddr with IPCONFIG_DYNAMIC.David S. Miller2016-06-121-0/+2
| | | | | | | | >> net/ipv4/ipconfig.c:130:15: warning: 'ic_addrservaddr' defined but not used [-Wunused-variable] static __be32 ic_addrservaddr = NONE; /* IP Address of the IP addresses'server */ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: au1000_eth: fix PHY detectionManuel Lauss2016-06-111-2/+2
| | | | | | | | | | | | | | Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: au1000_eth: fix PHY detection"David S. Miller2016-06-111-6/+7
| | | | | | | | This reverts commit a2f27217e4e60e663b5b971b0ccb287a9548b04e. I applied the wrong version of this. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: au1000_eth: fix PHY detectionManuel Lauss2016-06-111-7/+6Star
| | | | | | | | | | | | | | Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541 ("phy: Add API for {un}registering an mdio device to a bus.") broke PHY detection on this driver with a copy-paste bug: The code is looking 32 times for a PHY at address 0. Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have their (autodetected) PHYs at address 31. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'mediatek-fixes'David S. Miller2016-06-112-19/+45
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | John Crispin says: ==================== net: mediatek: various small fixes This series contains various small fixes that we stumbled across while doing thorough testing and code level reviewing of the driver. Changes in V2: * drop the DQL patch from the list until a better solution is found ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: remove superfluous queue wake up callJohn Crispin2016-06-111-5/+2Star
| | | | | | | | | | | | | | | | | | | | | | | | | | The code checks if the queue should be stopped because we are below the threshold of free descriptors only to check if it should be started again. If we do end up in a state where we are at the threshold limit, it makes more sense to just stop the queue and wait for the next IRQ to trigger the TX housekeeping again. There is no rush in enqueuing the next packet, it needs to wait for all the others in the queue to be dispatched first anyway. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: only wake the queue if it is stoppedJohn Crispin2016-06-111-1/+16
| | | | | | | | | | | | | | | | | | The current code unconditionally wakes up the queue at the end of each tx_poll action. Change the code to only wake up the queues if any of them have actually been stopped before. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: fix off by one in the TX ring allocationJohn Crispin2016-06-111-2/+1Star
| | | | | | | | | | | | | | | | | | | | The TX ring setup has an off by one error causing it to not utilise all descriptors. This has the side effect that we need to reset the next pointer at runtime to make it work. Fix the off by one and remove the code fixing the ring at runtime. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: increase watchdog_timeoJohn Crispin2016-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | During stress testing, after reducing the threshold value, we have seen TX timeouts that were caused by the watchdog_timeo value being too low. Increase the value to 5 * HZ which is a value commonly used by many other drivers. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: fix threshold valueJohn Crispin2016-06-111-2/+1Star
| | | | | | | | | | | | | | | | | | | | The logic to calculate the threshold value for stopping the TX queue is bad. Currently it will always use 1/2 of the rings size, which is way too much. Set the threshold to MAX_SKB_FRAGS. This makes sure that the queue is stopped when there is not enough room to accept an additional segment.  Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: disable all interrupts during probeJohn Crispin2016-06-111-1/+1
| | | | | | | | | | | | | | | | | | The current code only disables those IRQs that we will later use. To ensure that we have a predefined state, we really want to disable all IRQs. Change the code to disable all IRQs to achieve this. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: add next data pointer coherency protectionJohn Crispin2016-06-112-1/+2
| | | | | | | | | | | | | | | | | | | | The QDMA engine can fail to update the register pointing to the next TX descriptor if this bit does not get set in the QDMA configuration register. Not setting this bit can result in invalid values inside the TX rings registers which will causes TX stalls. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: dropped rx packets are not being counted properlyJohn Crispin2016-06-111-0/+2
| | | | | | | | | | | | | | | | | | There are two places inside mtk_poll_rx where rx_dropped is not being incremented properly. Fix this by adding the missing code to increment the counter. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: invalid buffer lookup in mtk_tx_map()John Crispin2016-06-111-1/+1
| | | | | | | | | | | | | | | | | | The lookup of the tx_buffer in the error path inside mtk_tx_map() uses the wrong descriptor pointer. This looks like a copy & paste error. Change the code to use the correct pointer. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: fix missing free of scratch memoryJohn Crispin2016-06-112-5/+15
| | | | | | | | | | | | | | | | | | | | Scratch memory gets allocated in mtk_init_fq_dma() but the corresponding code to free it is missing inside mtk_dma_free() causing a memory leak. With this patch applied, we can run ifconfig up/down several thousand times without any problems. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mediatek: add missing return code checkJohn Crispin2016-06-111-0/+3
|/ | | | | | | | The code fails to check if the scratch memory was properly allocated. Add this check and return with an error if the allocation failed. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipconfig: avoid warning by making ic_addrservaddr staticBen Dooks2016-06-111-1/+1
| | | | | | | | | | The symbol ic_addrservaddr is not static, but has no declaration to match so make it static to fix the following warning: net/ipv4/ipconfig.c:130:8: warning: symbol 'ic_addrservaddr' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: diag: add missing declarationsBen Dooks2016-06-112-6/+6
| | | | | | | | | | | | The functions inet_diag_msg_common_fill and inet_diag_msg_attrs_fill seem to have been missed from the include/linux/inet_diag.h header file. Add them to fix the following warnings: net/ipv4/inet_diag.c:69:6: warning: symbol 'inet_diag_msg_common_fill' was not declared. Should it be static? net/ipv4/inet_diag.c:108:5: warning: symbol 'inet_diag_msg_attrs_fill' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Fix incorrect re-injection of STP packetsIdo Schimmel2016-06-111-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") fixed incorrect usage of NF_HOOK's return value by consuming packets in okfn via br_pass_frame_up(). However, this function re-injects packets to the Rx path with skb->dev set to the bridge device, which breaks kernel's STP, as all STP packets appear to originate from the bridge device itself. Instead, if STP is enabled and bridge isn't a 802.1ad bridge, then learn packet's SMAC and inject it back to the Rx path for further processing by the packet handlers. The patch also makes netfilter's behavior consistent with regards to packets destined to the Bridge Group Address, as no hook registered at LOCAL_IN will ever be called, regardless if STP is enabled or not. Cc: Florian Westphal <fw@strlen.de> Cc: Shmulik Ladkani <shmulik.ladkani@gmail.com> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: smsc: reintroduced unconditional soft resetManfred Schlaegl2016-06-111-13/+4Star
| | | | | | | | | | | | | | | | | | We detected some problems using the smsc lan8720a in combination with i.MX28 and tracked this down to commit 21009686662f ("net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function") With 2100968666 the generic soft reset is replaced by a specific function which handles power down state correctly. But additionally the soft reset itself got conditional and is therefore also only performed if the phy is in power down state. This patch keeps the conditional wake up from power down, but re-introduces the unconditional soft reset using the generic soft reset function. It was tested on linux-4.1.25 and linux-4.7.0-rc2. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2016-06-1093-460/+828
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal. 2) Revert some msleep conversions in rtlwifi as these spots are in atomic context, from Larry Finger. 3) Validate that NFTA_SET_TABLE attribute is actually specified when we call nf_tables_getset(). From Phil Turnbull. 4) Don't do mdio_reset in stmmac driver with spinlock held as that can sleep, from Vincent Palatin. 5) sk_filter() does things other than run a BPF filter, so we should not elide it's call just because sk->sk_filter is NULL. Fix from Eric Dumazet. 6) Fix missing backlog updates in several packet schedulers, from Cong Wang. 7) bnx2x driver should allow VLAN add/remove while the interface is down, from Michal Schmidt. 8) Several RDS/TCP race fixes from Sowmini Varadhan. 9) fq_codel scheduler doesn't return correct queue length in dumps, from Eric Dumazet. 10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from Yuchung Cheng. 11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(), from Guillaume Nault. 12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian Westphal. 13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling, from Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) vmxnet3: segCnt can be 1 for LRO packets packet: compat support for sock_fprog stmmac: fix parameter to dwmac4_set_umac_addr() net/mlx5e: Fix blue flame quota logic net/mlx5e: Use ndo_stop explicitly at shutdown flow net/mlx5: E-Switch, always set mc_promisc for allmulti vports net/mlx5: E-Switch, Modify node guid on vf set MAC net/mlx5: E-Switch, Fix vport enable flow net/mlx5: E-Switch, Use the correct error check on returned pointers net/mlx5: E-Switch, Use the correct free() function net/mlx5: Fix E-Switch flow steering capabilities check net/mlx5: Fix flow steering NIC capabilities check net/mlx5: Fix root flow table update net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly net/mlx5: Fix masking of reserved bits in XRCD number net/mlx5: Fix the size of modify QP mailbox mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name() mlxsw: spectrum: Make split flow match firmware requirements wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel cfg80211: remove get/set antenna and tx power warnings ...
| * vmxnet3: segCnt can be 1 for LRO packetsShrikrishna Khare2016-06-102-3/+3
| | | | | | | | | | | | | | | | The device emulation may send segCnt of 1 for LRO packets. Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Jin Heo <heoj@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * packet: compat support for sock_fprogWillem de Bruijn2016-06-103-2/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Socket option PACKET_FANOUT_DATA takes a struct sock_fprog as argument if PACKET_FANOUT has mode PACKET_FANOUT_CBPF. This structure contains a pointer into user memory. If userland is 32-bit and kernel is 64-bit the two disagree about the layout of struct sock_fprog. Add compat setsockopt support to convert a 32-bit compat_sock_fprog to a 64-bit sock_fprog. This is analogous to compat_sock_fprog support for SO_REUSEPORT added in commit 1957598840f4 ("soreuseport: add compat case for setsockopt SO_ATTACH_REUSEPORT_CBPF"). Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: fix parameter to dwmac4_set_umac_addr()Ben Dooks2016-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dwmac4_set_umac_addr() takes a struct mac_device_info as the first parameter, but is being passed a ioaddr instead from dwmac4_set_filter(). Fix the warning/bug by changing the first parameter. drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: expected struct mac_device_info *hw drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: got void [noderef] <asn:2>*ioaddr Note, only compile tested this as do not have any hardware with it in. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'mlx5-fixes'David S. Miller2016-06-1010-52/+128
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes for 4.7-rc The following series provides some small fixes for mlx5 driver. Two small fixes for the mlx5e netdev, the 1st is for the blue flame quota accounting and the 2nd is a small refactoring in shutdown flow. Five trivial fixes for mlx5 E-Switch. - Allmulti mc_promisc flag was not set in a specific flow. - Modify VF node guid when admin mac is changed. - Race in vport enable flow. - Misc code fixes (kvfree when needed and error pointers checking). Three in mlx5 steering area. Correct capabilities checking and root flow table update. Three misc fixes in mlx5 commands enum and layouts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5e: Fix blue flame quota logicEli Cohen2016-06-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Blue flame is a latency enhancement feature that allows the driver to write the packet data directly to the NIC's registers thus making the read of the packet data from host memory redundant. We maintain a quota for the blue flame which is reloaded whenever we identify that the hardware is processing send requests and processes them fast enough so by the time we post the next send request it was able to process all the pending ones. This indicates that the hardware is capable of processing more blue flame requests efficiently. The blue flame quota is decremented whenever we send using blue flame. The current code erroneously clears the budget if we did not use blue flame for the current post send operation and we fix it here. Fixes: 88a85f99e51f ('net/mlx5e: TX latency optimization to save DMA reads') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5e: Use ndo_stop explicitly at shutdown flowEran Ben Elisha2016-06-101-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation copies the flow of ndo_stop instead of calling it explicitly, Fixed it. Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5: E-Switch, always set mc_promisc for allmulti vportsMohamad Haj Yahia2016-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the mc_promisc flag also in the case of adding new mc address to existing allmulti vport. Fixes: a35f71f27a61 ('net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5: E-Switch, Modify node guid on vf set MACNoa Osherovich2016-06-104-4/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In RoCE, the RDMA-CM needs the node guid to establish connection between nodes. Today, the node guid exposed to mlx5 Ethernet VFs is zero, therefore RDMA-CM on the VF is broken. Whenever the administrator sets a MAC for a VF, derive the node guid from it and set it as well in the following way: MAC: e4:1d:2d:b3:f4:01 -> node_guid: e4:1d:2d:ff:fe:b3:f4:01 Fixes: 77256579c6b43 ('net/mlx5: E-Switch, Introduce Vport...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5: E-Switch, Fix vport enable flowMohamad Haj Yahia2016-06-101-4/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reorder vport enable flow to mark the vport as enabled before calling the vport change handler which was modified to handle the case for when vport is not enabled. This fixes the case for when the PF netdev is open before sriov is enabled, once sriov is enabled at esw_enable_vport, esw_vport_change_handle_locked didn't read the PF context since it thought the PF vport was not enabled. When we enable the vport, arming for events is not required anymore, since it's done on the vport change handle Fixes: 586cfa7f1d58 ('net/mlx5: E-Switch, Use vport event handler for vport cleanup') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5: E-Switch, Use the correct error check on returned pointersOr Gerlitz2016-06-101-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mlx5 flow-steering API (mlx5_create_flow_table/group/rule) never returns null pointer on error. Even if it was doing that, checking for IS_ERR_OR_NULL(p) and then returning PTR_ERR(p) would have cause bugs, since PTR_ERR(NULL) --> success, crash. To make things more robust and protect against related future bugs, convert all IS_ERR_OR_NULL checks on returned values to IS_ERR. Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs') Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5: E-Switch, Use the correct free() functionOr Gerlitz2016-06-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We must use kvfree() for something that could have been allocated with vzalloc(), do that. Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs') Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-02 16:41:37 +0200