summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: Update git repository URLMark Brown2011-11-021-1/+1
| | | | | | Remove the -2.6 from the name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLKMark Brown2011-11-011-9/+8Star
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: Ensure the WM8962 oscillator and PLLs start up disabledMark Brown2011-11-011-0/+5
| | | | | | | | Since there is no current software control for these they would otherwise be left enabled, consuming power. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: Ensure WM8962 PLL registers are resetMark Brown2011-11-011-1/+7
| | | | | | | | The WM8962 has a separate software reset for the PLL registers. Ensure that these are reset also on startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: Fix return value of wm5100_gpio_direction_out()Mark Brown2011-10-311-4/+8
| | | | | | | We can't just pass back the return value of snd_soc_update_bits() as it will be 1 if a bit changed rather than zero. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: WM8904: Set `invert' bit for Capture SwitchHong Xu2011-10-311-1/+1
| | | | | | | | | Set `invert' bit for Capture Switch. Otherwise analogue is muted when Capture Switch is ON. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmtAxel Lin2011-10-311-1/+1
| | | | | | | | | | | Current implementation in wm8711_set_dai_fmt always clear BIT[3:2] (the Input Audio Data Bit Length Select) of WM8711_IFACE(07h) register. Input Audio Data Bit Length Select bits are set by wm8711_hw_params, we should leave BIT[3:2] untouched in wm8711_set_dai_fmt. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: wm8711: Fix wrong mask for setting input audio data bit length selectAxel Lin2011-10-311-1/+1
| | | | | | | | | | The Input Audio Data Bit Length Select is controlled by BIT[3:2] of WM8711_IFACE(07h) register. Current code incorrectly masks BIT[1:0] which is for Audio Data Format Select. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: tlv320aic3x: Clear BIT_CLK_MASTER and WORD_CLK_MASTER bits for for ↵Axel Lin2011-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | slave mode According to the datasheet: Page0 / Register8: Audio Serial Data interface Control Register A BIT 7: Bit Clock Directional Control 0: Bit clock is an input (slave mode) 1: Bit clock is an output (master mode) BIT 6: Word Clock Directional Control 0: Word clock is an input (slave mode) 1: Word clock is an output (master mode) Current code sets BIT_CLK_MASTER and WORD_CLK_MASTER bits for master mode, but does not clear these bits for slave mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: tlv320aic23: Clear TLV320AIC23_MS_MASTER bit for slave modeAxel Lin2011-10-271-0/+1
| | | | | | | | | | | | | | | According to the datasheet: Digital Audio Interface Format (07h) register: BIT6: Master/slave mode 0: Slave 1: Master Current code sets TLV320AIC23_MS_MASTER bit for master mode, but does not clear it for slave mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8940: Fix mask for setting BCLKDIVAxel Lin2011-10-271-1/+1
| | | | | | | | | According to the datasheet: BCLK is controlled by BIT[4:2] of WM8940_CLOCK(06h) register. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8940: Properly set codec->dapm.bias_levelAxel Lin2011-10-271-0/+2
| | | | | | | Reported-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
* ASoC: max98095: Convert codec->hw_write to snd_soc_writeAxel Lin2011-10-221-7/+6Star
| | | | | | | | | | | | | | codec->hw_write is broken now, convert codec->hw_write to snd_soc_write. The hardware has 2 banks of registers sharing a section in I2C register space. The 1st bank is the primary one and is cached. The 2nd bank is for loading coefficients only and they do not need cache. These coefficients registers are therefore direct writes. Thus we set cache_bypass flag to deal with this before calling snd_soc_write. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: keep pointer to resource so it can be freedJulia Lawall2011-10-225-63/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new variable for storing resources accessed subsequent to the one accessed using request_mem_region, so the one accessed using request_mem_region can be released if needed. The resource variable names are also changed to be more descriptive. This code is also missing some calls to iounmap. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits callsAxel Lin2011-10-221-6/+6
| | | | | | | | | Ensure all mask bits are clear before setting new value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2Axel Lin2011-10-221-1/+1
| | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: da7210: Add support for line out and DACAshish Chavan2011-10-221-0/+96
| | | | | | | | | | | DA7210 has three line outputs. OUT1 Left, OUT1 Right and OUT2 (mono). This patch adds support for gain controls for these three line outs. It also adds support for overall DAC gain control. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for DAPMAshish Chavan2011-10-221-24/+121
| | | | | | | | | | This patch adds support for DAPM covering all inputs and outputs as well as ADC and DAC. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask valueAxel Lin2011-10-211-3/+3
| | | | | | | | | | We have defined SGTL5000_LINREG_VDDD_MASK in sgtl5000.h, use it instead of hardcoded (0x1 << 4) - 1 for the mask. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Set sgtl5000->ldo in ldo_regulator_registerAxel Lin2011-10-211-0/+2
| | | | | | | | | | Otherwise calling ldo_regulator_remove() does not unregister regulator and free memories. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 CaptureAxel Lin2011-10-201-2/+2
| | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 CaptureAxel Lin2011-10-201-1/+1
| | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* ASoC: rt5631: Remove unused codec field from struct rt5631_privAxel Lin2011-10-201-2/+0Star
| | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: ak4671: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-201-12/+6Star
| | | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix reg_word_size for ak4104Axel Lin2011-10-201-1/+1
| | | | | | | | According to the register map in datasheet, the registers are 8 bit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm9081: Fix setting soft VMID ramp enable with VMID 2*240kAxel Lin2011-10-201-1/+1
| | | | | | | | | | | | | | | | According to the datasheet: BIT 2:1 VMID_SEL[1:0] VMID Divider Enable and Select 00 = VMID disabled 01 = 2x40k Omh divider 10 = 2x240k Omh divider 11 = 2x5k Omh divider To set VMID 2*240k, we should OR reg with 0x04 instead of 0x40. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: ak4641: Use SND_SOC_DAPM_DAC for Voice Playback stream widgetAxel Lin2011-10-191-1/+1
| | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for ALC and Noise suppressionAshish Chavan2011-10-191-0/+110
| | | | | | | | | | | | | | | | This patch adds controls to set following ALC parameters, - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay It also adds a switch to enable/disable noise suppression. As per DA7210 data sheet, ALC and noise suppression can be enabled only if certain conditions are met. This condition checks are handled by simply using "_EXT" version of controls to capture change events. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwod <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for mute and zero cross controlsAshish Chavan2011-10-191-0/+44
| | | | | | | | | | | | | | This patch adds support for below set of controls, (1) Mute controls for MIC, AUX and ADC (2) Zero cross controls for head phone, AUX, INPGA and line out (3) Head phone mode selection - class H or G It also adds digital_mute() call back. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: ak4641: Remove unused codec field from struct ak4641_privAxel Lin2011-10-191-1/+0Star
| | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: ssm2602: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-191-14/+16
| | | | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: WM9081 interrupt status register is volatileMark Brown2011-10-191-0/+1
| | | | | | | Not that we have interrupt handling in the driver at the minute. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* ASoC: sgtl5000: Fix setting mic bias resistorAxel Lin2011-10-191-6/+3Star
| | | | | | | | | | | | | | | | | | | According to the datasheet: CHIP_MIC_CTRL 0x002A BITS[9:8] BIAS_RESISTOR 0x0 = Powerd off 0x1 = 2.0 kohm 0x2 = 4.0 kohm 0x3 = 8.0 kohm To set mic bias resistor, we need to update bits[9:8] of SGTL5000_CHIP_MIC_CTRL register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: sgtl5000: Fix define for SGTL5000_BIAS_R_MASKAxel Lin2011-10-191-1/+1
| | | | | | | | | | | | | | | | | | According to the datasheet: CHIP_MIC_CTRL 0x002A BITS[9:8] BIAS_RESISTOR 0x0 = Powerd off 0x1 = 2.0 kohm 0x2 = 4.0 kohm 0x3 = 8.0 kohm Thus SGTL5000_BIAS_R_MASK should be defined as 0x0300 instead of 0x0200. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: ad193x: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-191-16/+15Star
| | | | | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix prefixing of DAPM controlsMark Brown2011-10-181-3/+3
| | | | | | | | We don't want to clear the prefix while we're creating the DAPM controls for the device as the prefix is applied during control creation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* ASoC: Convert WM9081 to table based control initMark Brown2011-10-181-2/+2
| | | | | | | | At least for the core controls, the optionally selected controls are still added programatically. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* ASoC: Update WM1811 DCS codes for latest evaluation resultsMark Brown2011-10-181-2/+2
| | | | | | | | Evaluation of larger quantities of material has provided new DCS codes values to be applied for WM1811. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
* ASoC: wm8580: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-171-13/+9Star
| | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8900: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-171-67/+42Star
| | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8900: Fix the mask definesAxel Lin2011-10-171-7/+7
| | | | | | | | | | | | | | | | | Now we have done bitwise NOT against the mask bits for the defines of WM8900_REG_CLOCKING1_BCLK_MASK, WM8900_REG_CLOCKING1_OPCLK_MASK and WM8900_LRC_MASK. But we don't have the bitwise NOT against the mask bits for the defines of WM8900_REG_CLOCKING2_DAC_CLKDIV, WM8900_REG_CLOCKING2_ADC_CLKDIV and WM8900_REG_DACCTRL_AIF_LRCLKRATE. It is error prone to mix the inconsistent meaning for different mask defines. So lets make the defines for each mask to be corresponding to the bits defines in datasheet. Don't add extra "bitwise NOT" to the defines. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8900: Fix wrong mask for setting DAC_CLKDIV/ADC_CLKDIV/LRCLK_MODEAxel Lin2011-10-171-3/+3
| | | | | | | | | After checking the datasheet, I think what we want to do here is to clear the WM8900_REG_CLOCKING2_DAC_CLKDIV/WM8900_REG_CLOCKING2_ADC_CLKDIV/ WM8900_REG_DACCTRL_AIF_LRCLKRATE bits and then OR with div value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8741: Use snd_soc_cache_sync to sync reg_cache with the hardwareAxel Lin2011-10-171-9/+1Star
| | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8741: Fix setting interface format for DSP modesAxel Lin2011-10-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | According to the datasheet: Format Control (05h) BITS[3:2] FMT[1:0] Audio data format selection 00 = right justified mode 01 = left justified mode 10 = I2S mode 11 = DSP mode BIT[4] LRP Polarity selec for LRCLK/DSP mode select 0 = normal LRCLK poalrity/DSP mode A 1 = inverted LRCLK poarity/DSP mode B For SND_SOC_DAIFMT_DSP_A, we should set 0x000C instead of 0x0003. For SND_SOC_DAIFMT_DSP_B, we should set 0x001C instead of 0x0013. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* MANITAINERS: Add Cragganmore reference platform to Wolfson supportMark Brown2011-10-171-0/+1
| | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for High pass and Voice filters for ADC and DACAshish Chavan2011-10-171-25/+32
| | | | | | | | | | | | | This patch add controls for setting cut-off for high pass and voice filters of ADC and DAC. There are also switches to enable/disable these filters. Also removed hard coded, fixed values of these parameters used by previous version of driver. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: da7210: Add support for ADC & DAC equalizersAshish Chavan2011-10-171-0/+37
| | | | | | | | | This patch adds support for ADC and DAC five band equalizers available on DA7210 codec. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Tegra: sparse cleanupOlof Johansson2011-10-172-3/+3
| | | | | | | | | | | | Fixes the following sparse warnings: sound/soc/tegra/tegra_das.c:215:8: warning: Using plain integer as NULL pointer sound/soc/tegra/tegra_das.c:237:8: warning: Using plain integer as NULL pointer sound/soc/tegra/tegra_pcm.c:370:32: warning: symbol 'tegra_pcm_platform' was not declared. Should it be static? Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* MAINTAINERS: Add maintainer for Analog Devices sound CODECsLars-Peter Clausen2011-10-171-0/+1
| | | | | | | | | The MAINTAINERS entry for the ADI sound CODEC drivers currently only lists the ADI devices-drivers-devel mailing-list. Add myself as additional contact, since I'm the person at ADI who is currently doing most of the work on these drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: twl6040: Request core to inline the DAPM sequencePeter Ujfalusi2011-10-141-0/+1
| | | | | | | | | | | | | | | | We need to have as less time between McPDM shutdown, and power down of the DAC on the twl6040 codec as possible. Request core to ignore the pmdown_time for the playback stream. Backround: with the McPDM protocol we are sendning not only the pure audio stream, but OMAP McPDM also transmits additional information (for example offset cancellation). If McPDM is stopped prior to the DAC this information will be not sent to the codec, which can result noise rendered by the twl6040 codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-28 17:58:28 +0200