summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: intel: Kill BUG_ON() usageTakashi Iwai2017-09-202-2/+0Star
| | | | | | | | | Don't use BUG_ON() for a non-critical sanity check on production systems. This patch either removes useless BUG_ON() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: Atom: Remove unneeded linux/miscdevice.h includeCorentin LABBE2017-09-191-1/+0Star
| | | | | | | | No file in sound/soc/intel/ use any miscdevice. This patch remove this uncessary include. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: cht_bsw_max98090: add gpio-based jack detectionPierre-Louis Bossart2017-09-191-1/+55
| | | | | | | | | | | | | | Jacks are created but only enabled when the external TI chip is present, this probably never worked as well. Forklift the gpio-based code from the legacy byt-max98090 driver, with however a less strict error check. It's fine to let users enjoy their device even if jack detection doesn't work - it almost never does without quirks... Tested on Lenovo100s Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: cht_bsw_max98090_ti: Fix jack initializationThierry Escande2017-09-191-14/+31
| | | | | | | | | | | | | | | | | | If the ts3a227e audio accessory detection hardware is present and its driver probed, the jack needs to be created before enabling jack detection in the ts3a227e driver. With this patch, the jack is instantiated in the max98090 headset init function if the ts3a227e is present. This fixes a null pointer dereference as the jack detection enabling function in the ts3a driver was called before the jack is created. [minor correction to keep error handling on jack creation the same as before by Pierre Bossart] Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: atom: use cht_bsw_max98090 for Baytrail ChromebooksPierre-Louis Bossart2017-09-191-0/+8
| | | | | | | | | | | | | | Baytrail Chromebooks used to be managed with legacy driver which is not compatible with atom/sst drivers. Reuse CHT driver to handle max98098 codec and allow distributions to support all Atom platforms with the same build. The legacy byt-max98090 can still be used but in a build for Baytrail+max98090 only. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: cht_bsw_max98090: add support for BaytrailPierre-Louis Bossart2017-09-191-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | Distributions such as Fedora, Ubuntu and Gallium don't currently have a means to support Baytrail Chromebooks and other platforms with the same build [1][2] due to incompatible platform drivers. Add MCLK management to reuse this machine driver for Baytrail platforms and solve this coexistence problem at last. UCM files are provided at [3] and will eventually be submitted to the new repo. The legacy byt-max98090 machine driver is still maintained but can only be used when the other Atom/DPCM driver is not compiled in, or when users don't want to configure extra mixers required by the Atom/sst driver. Tested on Lenovo 100s Baytrail Chromebook w/ Mr. Chromebox BOOT_STUB firmware and Acer R11 Cherrytrail Chromebook [1] https://bugzilla.redhat.com/show_bug.cgi?id=1335196 [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-August/ 111641.html [3] https://github.com/plbossart/UCM/tree/master/byt-max98090 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: bytcr_rt5640: simplify MCLK quirk testsPierre-Louis Bossart2017-09-191-3/+3
| | | | | | | | | | remove redundant tests to check MCLK (align with other machine drivers). some checks remain since when the MCLK is disabled we fall back to using the bclk as PLL reference Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: bytcr-rt5651: fix capture routesPierre-Louis Bossart2017-09-191-12/+8Star
| | | | | | | | | | There is only one dmic path and the routes were not added. Probably a copy-paste mistake when initially creating the file Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: boards: use devm_clk_get() unconditionallyPierre-Louis Bossart2017-09-193-30/+13Star
| | | | | | | | | | | | | | | | | | | | | | The clock framework was only used in Baytrail, on Cherrytrail the firmware takes care of the MCLK/plt_clk_3. With the fix in 'commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware")' the firmware-managed clocks are not impacted by enable/disable requests make at the driver level, and the rates are identical. Remove all checks for Baytrail and use devm_clk_get() unconditionally. Tested on Asus T100HA (CHT) and Asus T100TAF (BYT) Note that the RT5640 and RT5645 machine drivers need to keep some checks for Valleyview to check for Baytrail-CR. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: atom: make sst_platform_compr_ops constBhumika Goyal2017-09-192-2/+2
| | | | | | | | | Make this const as it not modified in the file referencing it. It only stored in the const field 'compr_ops' of a snd_soc_platform_driver structure. Also, add const to the declaration in the header file. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Intel: Headset button support in kabylake machine driverNaveen M2017-09-191-0/+9
| | | | | | | | | Patch adds headset button support for kabylake machine driver (kbl_rt5663_max98927). Signed-off-by: Naveen M <naveen.m@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* Linux 4.14-rc1Linus Torvalds2017-09-171-2/+2
|
* Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds2017-09-164-16/+16
|\ | | | | | | | | | | | | | | | | | | | | | | Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
| * UBI: Fix two typos in commentsUwe Kleine-König2017-09-131-2/+2
| | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
| * ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate"Colin Ian King2017-09-131-1/+1
| | | | | | | | | | | | | | | | Trivial fix to spelling mistake in ubi_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * ubi: pr_err() strings should end with newlinesBen Dooks2017-09-131-3/+3
| | | | | | | | | | | | | | | | In build.c, the following pr_err calls should be terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
| * ubi: pr_err() strings should end with newlinesBen Dooks2017-09-131-4/+4
| | | | | | | | | | | | | | | | | | In ubi_attach_mtd_dev() the pr_err() calls should have their messgaes terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
| * ubi: pr_err() strings should end with newlinesBen Dooks2017-09-131-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | The ubi_init() function has a few error paths that use the pr_err() to output errors. These should have new lines on them as pr_err() does not automatically do this. This fixes issues where if multiple mtd fail to bind to ubi the console output starts wrapping around. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
* | Merge branch 'for-linus-4.14-rc1' of ↵Linus Torvalds2017-09-1614-27/+41
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - minor improvements - fixes for Debian's new gcc defaults (pie enabled by default) - fixes for XSTATE/XSAVE to make UML work again on modern systems * 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: return negative in tuntap_open_tramp() um: remove a stray tab um: Use relative modversions with LD_SCRIPT_DYN um: link vmlinux with -no-pie um: Fix CONFIG_GCOV for modules. Fix minor typos and grammar in UML start_up help um: defconfig: Cleanup from old Kconfig options um: Fix FP register size for XSTATE/XSAVE
| * | um: return negative in tuntap_open_tramp()Dan Carpenter2017-09-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The intention is to return negative error codes. "pid" is already negative but we accidentally negate it again back to positive. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | um: remove a stray tabDan Carpenter2017-09-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Static checkers would urge us to add curly braces to this code, but actually the code works correctly. It just isn't indented right. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | um: Use relative modversions with LD_SCRIPT_DYNThomas Meyer2017-09-131-0/+1
| | | | | | | | | | | | | | | | | | | | | When building a dynamic kernel image use relative symbols with MODVERSIONS. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | um: link vmlinux with -no-pieThomas Meyer2017-09-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Debian's gcc defaults to pie. The global Makefile already defines the -fno-pie option. Link UML dynamic kernel image also with -no-pie to fix the build. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | um: Fix CONFIG_GCOV for modules.Thomas Meyer2017-09-131-0/+7
| | | | | | | | | | | | | | | | | | | | | Explicitly export symbols so modpost doesn't complain. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | Fix minor typos and grammar in UML start_up helpJames Pack2017-09-131-3/+3
| | | | | | | | | | | | | | | Signed-off-by: James Pack <jpack61108@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | um: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski2017-09-132-2/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | um: Fix FP register size for XSTATE/XSAVEThomas Meyer2017-09-136-19/+27
| |/ | | | | | | | | | | | | | | Hard code max size. Taken from https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=gdb/common/x86-xstate.h Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Richard Weinberger <richard@nod.at>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2017-09-1648-234/+467
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
| * | mlxsw: spectrum_router: Only handle IPv4 and IPv6 eventsIdo Schimmel2017-09-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Andreas Rammhold <andreas@rammhold.de> Reported-by: Florian Klink <flokli@flokli.de> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Documentation: link in networking docsPavel Machek2017-09-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix link in filter.txt. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tcp: fix data delivery rateEric Dumazet2017-09-161-4/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bpf/verifier: reject BPF_ALU64|BPF_ENDEdward Cree2017-09-162-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Neither ___bpf_prog_run nor the JITs accept it. Also adds a new test case. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sctp: do not mark sk dumped when inet_sctp_diag_fill returns errXin Long2017-09-151-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill returns err, in which case it shouldn't mark sk dumped by setting cb->args[3] as 1 in sctp_sock_dump(). Otherwise, it could cause some asocs to have no parent's sk dumped in 'ss --sctp'. So this patch is to not set cb->args[3] when inet_sctp_diag_fill() returns err in sctp_sock_dump(). Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sctp: fix an use-after-free issue in sctp_sock_dumpXin Long2017-09-153-39/+36Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | netvsc: increase default receive buffer sizeStephen Hemminger2017-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default receive buffer size was reduced by recent change to a value which was appropriate for 10G and Windows Server 2016. But the value is too small for full performance with 40G on Azure. Increase the default back to maximum supported by host. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tcp: update skb->skb_mstamp more carefullyEric Dumazet2017-09-151-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <edumazet@googl.com> Reported-by: liujian <liujian56@huawei.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ipv4: fix l3slave check for index returned in IP_PKTINFODavid Ahern2017-09-151-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa76390bf05 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: smsc911x: Quieten netif during suspendGeert Uytterhoeven2017-09-151-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: systemport: Fix 64-bit stats deadlockFlorian Fainelli2017-09-151-3/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can enter a deadlock situation because there is no sufficient protection when ndo_get_stats64() runs in process context to guard against RX or TX NAPI contexts running in softirq, this can lead to the following lockdep splat and actual deadlock was experienced as well with an iperf session in the background and a while loop doing ifconfig + ethtool. [ 5.780350] ================================ [ 5.784679] WARNING: inconsistent lock state [ 5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted [ 5.794561] -------------------------------- [ 5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 5.810175] (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54 [ 5.818327] {SOFTIRQ-ON-W} state was registered at: [ 5.823278] bcm_sysport_get_stats64+0x17c/0x258 [ 5.828053] dev_get_stats+0x38/0xac [ 5.831776] rtnl_fill_stats+0x30/0x118 [ 5.835761] rtnl_fill_ifinfo+0x538/0xe24 [ 5.839921] rtmsg_ifinfo_build_skb+0x6c/0xd8 [ 5.844430] rtmsg_ifinfo_event.part.5+0x14/0x44 [ 5.849201] rtmsg_ifinfo+0x20/0x28 [ 5.852837] register_netdevice+0x628/0x6b8 [ 5.857171] register_netdev+0x14/0x24 [ 5.861051] bcm_sysport_probe+0x30c/0x438 [ 5.865280] platform_drv_probe+0x50/0xb0 [ 5.869418] driver_probe_device+0x2e8/0x450 [ 5.873817] __driver_attach+0x104/0x120 [ 5.877871] bus_for_each_dev+0x7c/0xc0 [ 5.881834] bus_add_driver+0x1b0/0x270 [ 5.885797] driver_register+0x78/0xf4 [ 5.889675] do_one_initcall+0x54/0x190 [ 5.893646] kernel_init_freeable+0x144/0x1d0 [ 5.898135] kernel_init+0x8/0x110 [ 5.901665] ret_from_fork+0x14/0x2c [ 5.905363] irq event stamp: 24263 [ 5.908804] hardirqs last enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4 [ 5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98 [ 5.925143] softirqs last enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98 [ 5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c [ 5.939985] [ 5.939985] other info that might help us debug this: [ 5.946576] Possible unsafe locking scenario: [ 5.946576] [ 5.952556] CPU0 [ 5.955031] ---- [ 5.957506] lock(&syncp->seq#2); [ 5.960955] <Interrupt> [ 5.963604] lock(&syncp->seq#2); [ 5.967227] [ 5.967227] *** DEADLOCK *** [ 5.967227] [ 5.973222] 1 lock held by swapper/0/0: [ 5.977092] #0: (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54 So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64() since it does not appear to be useful for anything. No inconsistency was observed with either ifconfig or ethtool, global TX counts equal the sum of per-queue TX counts on a 32-bit architecture. Fixes: 10377ba7673d ("net: systemport: Support 64bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: vrf: avoid gcc-4.6 warningArnd Bergmann2017-09-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | qed: remove unnecessary call to memsetHimanshu Jha2017-09-151-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Sudarsana Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: clean up redundant initialization of tnapiColin Ian King2017-09-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tnapi is being initialized and then immediately updated and hence the initialiation is redundant. Clean up the warning by moving the declaration and initialization to the inside of the for-loop. Cleans up clang scan-build warning: warning: Value stored to 'tnapi' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tls: make tls_sw_free_resources staticTobias Klauser2017-09-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Make the needlessly global function tls_sw_free_resources static to fix a gcc/sparse warning. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sctp: potential read out of bounds in sctp_ulpevent_type_enabled()Dan Carpenter2017-09-141-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code causes a static checker warning because Smatch doesn't trust anything that comes from skb->data. I've reviewed this code and I do think skb->data can be controlled by the user here. The sctp_event_subscribe struct has 13 __u8 fields and we want to see if ours is non-zero. sn_type can be any value in the 0-USHRT_MAX range. We're subtracting SCTP_SN_TYPE_BASE which is 1 << 15 so we could read either before the start of the struct or after the end. This is a very old bug and it's surprising that it would go undetected for so long but my theory is that it just doesn't have a big impact so it would be hard to notice. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | MAINTAINERS: review Renesas DT bindings as wellSergei Shtylyov2017-09-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | When adding myself as a reviewer for the Renesas Ethernet drivers I somehow forgot about the bindings -- I want to review them as well. Fixes: 8e6569af3a1b ("MAINTAINERS: add myself as Renesas Ethernet drivers reviewer") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net_sched: gen_estimator: fix scaling error in bytes/packets samplesEric Dumazet2017-09-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Denys reported wrong rate estimations with HTB classes. It appears the bug was added in linux-4.10, since my tests where using intervals of one second only. HTB using 4 sec default rate estimators, reported rates were 4x higher. We need to properly scale the bytes/packets samples before integrating them in EWMA. Tested: echo 1 >/sys/module/sch_htb/parameters/htb_rate_est Setup HTB with one class with a rate/cail of 5Gbit Generate traffic on this class tc -s -d cl sh dev eth0 classid 7002:11 class htb 7002:11 parent 7002:1 prio 5 quantum 200000 rate 5Gbit ceil 5Gbit linklayer ethernet burst 80000b/1 mpu 0b cburst 80000b/1 mpu 0b level 0 rate_handle 1 Sent 1488215421648 bytes 982969243 pkt (dropped 0, overlimits 0 requeues 0) rate 5Gbit 412814pps backlog 136260b 2p requeues 0 TCP pkts/rtx 982969327/45 bytes 1488215557414/68130 lended: 22732826 borrowed: 0 giants: 0 tokens: -1684 ctokens: -1684 Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'nfp-card-init'David S. Miller2017-09-135-23/+107
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jakub Kicinski says: ==================== nfp: wait more carefully for card init The first patch is a small fix for flower offload, we need a whitelist of supported matches, otherwise the unsupported ones will be ignored. The second and the third patch are adding wait/polling to the probe path. We had reports of driver failing probe because it couldn't find the control process (NSP) on the card. Turns out the NSP will only announce its existence after it's fully initialized. Until now we assumed it will be reachable, just not processing commands (hence we wait for a NOOP command to execute successfully). v2: - fix a bad merge which resulted in a build warning and retest. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | nfp: wait for the NSP resource to appear on bootJakub Kicinski2017-09-133-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The control process (NSP) may take some time to complete its initialization. This is not a problem on most servers, but on very fast-booting machines it may not be ready for operation when driver probes the device. There is also a version of the flash in the wild where NSP tries to train the links as part of init. To wait for NSP initialization we should make sure its resource has already been added to the resource table. NSP adds itself there as last step of init. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | nfp: wait for board state before talking to the NSPJakub Kicinski2017-09-132-23/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board state informs us which low-level initialization stages the card has completed. We should wait for the card to be fully initialized before trying to communicate with it, not only before we configure passing traffic. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | nfp: add whitelist of supported flow dissectorPieter Jansen van Vuuren2017-09-131-0/+13
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we did not check the flow dissector against a list of allowed and supported flow key dissectors. This patch introduces such a list and correctly rejects unsupported flow keys. Fixes: 43f84b72c50d ("nfp: add metadata to each flow offload") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-13 11:07:49 +0200