summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* metag: smp: don't spin waiting for CPU to startJames Hogan2013-07-021-10/+6Star
| | | | | | | | | | | | | | | Use a completion to block until a secondary CPU has started up, like ARM do, instead of a loop of udelays. On Meta, SMP is really SMT, with each "CPU" being a different hardware thread on the same Meta processor core, so as well as being more efficient and latency friendly, using a completion prevents the bogomips of the secondary CPU from being drastically skewed every time by the execution of the tight in-cache udelay loop on the other CPU. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
* metag: smp: enable irqs after set_cpu_onlineJames Hogan2013-07-021-5/+6
| | | | | | | | | | | | | | In secondary_start_kernel() interrupts should be enabled with local_irq_enable() after the cpu is marked as online with set_cpu_online(). Otherwise it's possible for a timer interrupt to trigger a softirq, which if the cpu is marked as offline may have it's affinity altered. Reported-by: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Kirill Tkhai <tkhai@yandex.ru>
* metag: use clear_tasks_mm_cpumask()James Hogan2013-07-021-7/+1Star
| | | | | | | | | | | | | | | | | | Checking for process->mm is not enough because process' main thread may exit or detach its mm via use_mm(), but other threads may still have a valid mm. To fix this we would need to use find_lock_task_mm(), which would walk up all threads and returns an appropriate task (with task lock held). clear_tasks_mm_cpumask() was introduced in v3.5-rc1 to fix this issue, so let's use it for metag too. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
* metag: tz1090: select and instantiate pinctrl-tz1090-pdcJames Hogan2013-06-272-0/+7
| | | | | | | | | | Select PINCTRL_TZ1090_PDC from SOC_TZ1090 to enable the PDC pin controller driver once it is merged, and instantiate it from tz1090.dtsi. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org>
* metag: tz1090: select and instantiate pinctrl-tz1090James Hogan2013-06-272-0/+8
| | | | | | | | | | Select PINCTRL and PINCTRL_TZ1090 from SOC_TZ1090 to enable the main pin controller driver once it is merged, and instantiate it from tz1090.dtsi. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org>
* metag: don't check for cache aliasing on smp cpu bootJames Hogan2013-06-271-6/+0Star
| | | | | | | | | The cache configuration of the boot cpu is now duplicated to secondary cpus, so there's no need to check for cache aliasing again when a secondary cpu is booted. Therefore remove the check from secondary_start_kernel(). Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag: panic if cache aliasing possibleJames Hogan2013-06-271-6/+7
| | | | | | | | | | | | | | If the cache and page size configuration allows for cache aliasing to occur we warn on boot, but the log messages are easy to miss and will result is random crashes occuring in userland. Let's panic too in this case so that the user immediately knows they need to fix the cache configuration or configured page size. Also fix the warning messages which display the cache and page sizes to include newlines, and add the word "Potential" since an actual cache alias hasn't been detected. Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag: *.dts: include using preprocessorJames Hogan2013-06-273-3/+3
| | | | | | | | | | Include *.dtsi files from *.dts using the preprocessor to set a good example for future device tree files. Files included in the old way don't get pre-processed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: devicetree-discuss@lists.ozlabs.org
* metag: add <dt-bindings/> symlinkJames Hogan2013-06-271-0/+1
| | | | | | | | | | | | | | | | | | | Add symlink to include/dt-bindings from arch/metag/boot/dts/include/ to match the one in arch/arm/... (see the commit below) so that preprocessed device tree files can include various useful constant definitions. Commit c58299aa87544a590c62bda0bf52b69fa56cb8d5 ("kbuild: create an "include chroot" for DT bindings") merged in v3.10-rc1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Grant Likely <grant.likely@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kbuild@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
* metag/.gitignore: Extend the *.dtb pattern to match the dtb.S filesMarkos Chandras2013-06-131-1/+1
| | | | | | | | | The .SECONDARY rule for generating the *.dtb.S files added in 0b4184c26b18ecbc0ec0657f514b087c3a6216fb "metag: avoid unnecessary builtin dtb rebuilds" Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag/traps: include setup.h for the per_cpu_trap_init declarationMarkos Chandras2013-06-131-0/+1
| | | | | Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag/traps: Mark die() as __noreturn to match the declaration.Markos Chandras2013-06-132-4/+4
| | | | | Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag/processor.h: Add missing cpuinfo_op declaration.Markos Chandras2013-06-131-0/+2
| | | | | Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag/setup: Restrict scope for the capabilities variableMarkos Chandras2013-06-131-6/+6
| | | | | Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag/mm/cache: Restrict scope for metag_lnkget_probeMarkos Chandras2013-06-131-1/+1
| | | | | | | Hide symbol since it's only used within the cache.c file Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag/asm/irq.h: Declare init_IRQMarkos Chandras2013-06-131-0/+1
| | | | | | | | | Fixes the following sparce warning: warning: symbol 'init_IRQ' was not declared. Should it be static? Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag/kernel/irq.c: Declare root_domain as staticMarkos Chandras2013-06-131-1/+1
| | | | | | | | It is only referenced within the irq.c file, so restrict it's scope as appropriate. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* metag: log core and timer frequencies from arch codeJames Hogan2013-06-132-0/+4
| | | | | | | | | | Log core clock and Meta timer frequencies during init in architecture generic code, removing the need for equivalent log messages in SoC specific code. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de>
* metag: init common clk and use "core" clkJames Hogan2013-06-134-3/+106
| | | | | | | | | | | | | | | | If the common clock framework is enabled, call of_clk_init(NULL) in time_init() to register device tree clocks with the clock framework. After this time_init() calls a new function init_metag_clocks(), which looks for a clock named "core" in the node compatible with "img,meta" (usually the root node). If found the get_core_freq machine callback is overridden to obtain the core clock frequency using that clock. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree-discuss@lists.ozlabs.org
* metag: minimal TZ1090 (Comet) SoC infrastructureJames Hogan2013-06-137-1/+94
| | | | | | | | | | | | | | | | | | Add really minimal support for Toumaz Xenif TZ1090 SoC (A.K.A. Comet). This consists of minimal build infrastructure, device tree files, and a defconfig based on meta2_defconfig. This SoC contains a 2-threaded HTP (Meta 2) as the main application processor, and is found in a number of development boards and digital radios, such as the Minimorph Development Platform. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
* metag: of_platform_populate from arch generic codeJames Hogan2013-06-131-0/+4
| | | | | | | | | | | | If no init_machine callback is provided, call of_platform_populate() instead. This allows a board/SoC that only needs to call of_platform_populate to omit the callback altogether. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree-discuss@lists.ozlabs.org
* Linux 3.10-rc5Linus Torvalds2013-06-091-1/+1
|
* hpfs: fix warnings when the filesystem fills upMikulas Patocka2013-06-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2013-06-094-2/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: - Trivial: unused variable removal - Posix-timers: Add the clock ID to the new proc interface to make it useful. The interface is new and should be functional when we reach the final 3.10 release. - Cure a false positive warning in the tick code introduced by the overhaul in 3.10 - Fix for a persistent clock detection regression introduced in this cycle * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Correct run-time detection of persistent_clock. ntp: Remove unused variable flags in __hardpps posix-timers: Show clock ID in proc file tick: Cure broadcast false positive pending bit warning
| * Merge branch 'fortglx/3.10/time' of ↵Thomas Gleixner2013-05-292-1/+8
| |\ | | | | | | | | | git://git.linaro.org/people/jstultz/linux into timers/urgent
| | * timekeeping: Correct run-time detection of persistent_clock.Zoran Markovic2013-05-281-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 31ade30692dc9680bfc95700d794818fa3f754ac, timekeeping_init() checks for presence of persistent clock by attempting to read a non-zero time value. This is an issue on platforms where persistent_clock (instead is implemented as a free-running counter (instead of an RTC) starting from zero on each boot and running during suspend. Examples are some ARM platforms (e.g. PandaBoard). An attempt to read such a clock during timekeeping_init() may return zero value and falsely declare persistent clock as missing. Additionally, in the above case suspend times may be accounted twice (once from timekeeping_resume() and once from rtc_resume()), resulting in a gradual drift of system time. This patch does a run-time correction of the issue by doing the same check during timekeeping_suspend(). A better long-term solution would have to return error when trying to read non-existing clock and zero when trying to read an uninitialized clock, but that would require changing all persistent_clock implementations. This patch addresses the immediate breakage, for now. Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Feng Tang <feng.tang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org> [jstultz: Tweaked commit message and subject] Signed-off-by: John Stultz <john.stultz@linaro.org>
| | * ntp: Remove unused variable flags in __hardppsGeert Uytterhoeven2013-05-281-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kernel/time/ntp.c: In function ‘__hardpps’: kernel/time/ntp.c:877: warning: unused variable ‘flags’ commit a076b2146fabb0894cae5e0189a8ba3f1502d737 ("ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state") removed its users, but not the actual variable. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
| * | posix-timers: Show clock ID in proc filePavel Tikhomirov2013-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expand information about posix-timers in /proc/<pid>/timers by adding info about clock, with which the timer was created. I.e. in the forth line of timer info after "notify:" line go "ClockID: <clock_id>". Signed-off-by: Pavel Tikhomirov <snorcht@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Matthew Helsley <matt.helsley@gmail.com> Cc: Pavel Emelyanov <xemul@parallels.com> Link: http://lkml.kernel.org/r/1368742323-46949-2-git-send-email-snorcht@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | tick: Cure broadcast false positive pending bit warningThomas Gleixner2013-05-281-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 26517f3e (tick: Avoid programming the local cpu timer if broadcast pending) added a warning if the cpu enters broadcast mode again while the pending bit is still set. Meelis reported that the warning triggers. There are two corner cases which have been not considered: 1) cpuidle calls clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) twice. That can result in the following scenario CPU0 CPU1 cpuidle_idle_call() clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) set cpu in tick_broadcast_oneshot_mask broadcast interrupt event expired for cpu1 set pending bit acpi_idle_enter_simple() clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) WARN_ON(pending bit) Move the WARN_ON into the section where we enter broadcast mode so it wont provide false positives on the second call. 2) safe_halt() enables interrupts, so a broadcast interrupt can be delivered befor the broadcast mode is disabled. That sets the pending bit for the CPU which receives the broadcast interrupt. Though the interrupt is delivered right away from the broadcast handler and leaves the pending bit stale. Clear the pending bit for the current cpu in the broadcast handler. Reported-and-tested-by: Meelis Roos <mroos@linux.ee> Cc: Len Brown <lenb@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Rafael J. Wysocki <rjw@sisk.pl> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305271841130.4220@ionos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2013-06-093-4/+9
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull irqdomain bug fixes from Grant Likely: "This branch contains a set of straight forward bug fixes to the irqdomain code and to a couple of drivers that make use of it." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux: irqchip: Return -EPERM for reserved IRQs irqdomain: document the simple domain first_irq kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. irqdomain: export irq_domain_add_simple
| * | | irqchip: Return -EPERM for reserved IRQsGrant Likely2013-06-082-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by: Grant Likely <grant.likely@linaro.org>
| * | | irqdomain: document the simple domain first_irqLinus Walleij2013-06-081-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
| * | | kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.Chen Gang2013-06-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
| * | | irqdomain: export irq_domain_add_simpleArnd Bergmann2013-06-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Grant Likely <grant.likely@linaro.org>
* | | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2013-06-0815-49/+84
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes for arm-soc platforms. Nothing controversial here, a handful of fixes for regressions and/or serious problems across several of the platforms. Things are slowing down nicely on fix rates for 3.10" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: add debug_ll_io_init() call in exynos_init_io() ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins ARM: mxs: icoll: Fix interrupts gpio bank 0 ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: bcm2835: override the HW UART periphid ARM: mvebu: Fix bug in coherency fabric low level init function ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 ARM: ux500: Only configure wake-up reasons on ux500 based platforms ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels
| * \ \ \ Merge tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson2013-06-081-10/+4Star
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into fixes From Shawn Guo, mxs fixes for 3.10: - Since the time we move to MULTI_IRQ_HANDLER, the 0x7f polling for no interrupt in icoll_handle_irq() becomes insane, because 0x7f is an valid interrupt number, the irq of gpio bank 0. That unnecessary polling results in the driver not detecting when irq 0x7f is active which makes the machine effectively dead lock. The fix removes the interrupt poll loop and allows usage of gpio0 interrupt without an infinite loop. * tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: icoll: Fix interrupts gpio bank 0 Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | ARM: mxs: icoll: Fix interrupts gpio bank 0Markus Pargmann2013-06-031-10/+4Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mxs interrupt controller does not support polling for interrupts, but the driver still does it, which is a relict from pre-MULTI_IRQ_HANDLER times. The existing code assumes that 0x7f means no interrupt, but this value is an actually valid irq number, namely gpio bank 0's irq. This results in the driver not detecting when irq 0x7f is active which makes the machine effectively dead lock. This patch removes the interrupt poll loop and allows usage of gpio0 interrupt without an infinite loop. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | | Merge tag 'imx-fixes-3.10-2' of ↵Olof Johansson2013-06-085-13/+13
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo, imx fixes for 3.10, take 2: - One device tree fix for all spi node to have per clock added. The clock is needed by spi driver to calculate bit rate divisor. The spi node in the current device trees either does not have the clock or is defined as dummy clock, in which case the driver probe will fail or spi will run at a wrong bit rate. - Two imx6q clock fixes, which correct axi_sels and ldb_di_sels. * tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | ARM: imx: clk-imx6q: AXI clock select index is incorrectAnson Huang2013-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AXI clock mux should be as below: 00: periph; 01: pll2_pfd2_396m; 10: periph; 11: pll3_pfd1_540m; Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | | | ARM: dts: imx: fix clocks for cspiJonas Andersson2013-05-244-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CSPI controller has only one clock, but the driver spi-imx.c needs clock "per" to calculate bitrate divisor. Signed-off-by: Jonas Andersson <jonas@microbit.se> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | | | ARM i.MX6q: fix for ldb_di_selsJiada Wang2013-05-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pll5_video_div has been introduced to represent the clock generated from post-divider for video. Instead of pll5_video, pll5_video_div should be proper root clock for ldb_di_sel. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | | | ARM: exynos: add debug_ll_io_init() call in exynos_init_io()Doug Anderson2013-06-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the early MMU mapping of the UART happens to get booted out of the TLB between the start of paging_init() and when we finally re-add the UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if we've got early_printk enabled. Avoid this hang by calling debug_ll_io_init() early. Without this patch, you can reliably reproduce a hang when early printk is enabled by adding flush_tlb_all() at the start of exynos_init_io(). After this patch the hang goes away. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | | Merge tag 'renesas-fixes-for-v3.10' of ↵Olof Johansson2013-06-082-10/+37
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman, Renesas ARM based SoC fixes for v3.10: - Correction to USB OVC and PENC pin groupings on r8a7779 SoC. This avoids conflicts when the USB_OVCn pins are used by another function. This has been observed to be a problem in v3.10-rc1. - Update CMT clock rating for sh73a0 SoC to resolve boot failure on kzm9g-reference. This resolves a regression between v3.9 and v3.10-rc1. * tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | | ARM: shmobile: sh73a0: Update CMT clockevent rating to 80Simon Horman2013-06-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the CMT clockevent rating from 125 to 80. This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1 introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real"). The patch noted above reduces the rating of dummy clockevent from 400 to 100. This patch reduces the rating of CMT so that it is once again less than that of the dummy clockevent. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| | * | | | | | sh-pfc: r8a7779: Don't group USB OVC and PENC pinsLaurent Pinchart2013-06-041-9/+36
| | | |_|_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB_OVCn pins are alternate options for USB over-current detection when using a 3.3V USB interface. As they're not mandatory they can be used independently of the USB PENC pins. Don't group the USB_OVCn and PENC pins to avoid conflicts when the USB_OVCn pins are used by another function. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * | | | | | ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is definedTushar Behera2013-06-081-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Printing low-level debug messages make an assumption that the specified UART port has been preconfigured by the bootloader. Incorrectly specified UART port results in system getting stalled while printing the message "Uncompressing Linux... done, booting the kernel" This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since the UART port might different for different board, it is not possible to specify it correctly for every board that use a common defconfig file. Calling this print subroutine only when DEBUG_LL fixes the problem. By disabling DEBUG_LL in default config file, we would be able to boot multiple boards with different default UART ports. With this current approach, we miss the print "Uncompressing Linux... done, booting the kernel." when DEBUG_LL is not defined. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | | Merge tag 'ux500-arm-soc-v3.10-fixes-2' of ↵Olof Johansson2013-06-022-0/+7
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes From Linus Walleij, ux500 fixes for v3.10: - A multiplatform fix making sure ux500_idle_init() is only executed on ux500. - A regulator fix making sure the MMC/SD card regulator is not disabled on boot. Signed-off-by: Olof Johansson <olof@lixom.net> * tag 'ux500-arm-soc-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 ARM: ux500: Only configure wake-up reasons on ux500 based platforms
| | * | | | | | ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3Lee Jones2013-05-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug introduced in the v3.10 merge window. The AB8500 External Regulator driver has recently landed upstream, which registers each of the 3 external regulators located on the AB8500. If these regulators are marked as 'always on', there is a potential for power-loss. If they're not and are seemingly unused the Regulator subsystem will attempt to disable them to save power. This causes an issue for AUX1, AUX2 and AUX3 as they obtain their power from EXT3. So we're specifying that here to prevent EXT3 from being powered down. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | | | ARM: ux500: Only configure wake-up reasons on ux500 based platformsLee Jones2013-05-271-0/+4
| | | |_|_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multiplatform calls all enabled platforms' initcalls. In the ux500_idle_init() initcall we call into the DBx500-PRCMU which in turn executes some ux500 specific register reads/writes. When running on some !ux500 platforms this ends up causing a kernel Oops. This patch ensures the PRCMU call is only invoked when running on ux500 based platforms. Reported-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | | | ARM: bcm2835: override the HW UART periphidJongsung Kim2013-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stephen Warren reported the recent commit 78506f2 (add support for extended FIFO-size of PL011-r1p5) breaks the serial port on the BCM2835 ARM SoC. A UART compatible with the ARM PL011-r1p5 should have 32-deep FIFOs. The BCM2835 UART just looks like an ARM PL011-r1p5, but has 16-deep FIFOs just like PL011-r1p4 or earlier revisions. As a workaround for this compatibility issue, this patch overrides the HW UART periphid register values with the actually compatible UART periphid 0x00241011 (r1p3 or r1p4). Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-12 03:15:57 +0200