summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* gfs2: Update ctime in setflags ioctlAndreas Gruenbacher2017-09-251-0/+1
| | | | | | | | The FS_IOC_SETFLAGS ioctl is supposed to update the inode ctime. Fixes xfstests generic/277. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
* gfs2: Clarify gfs2_block_mapAndreas Gruenbacher2017-09-251-4/+10
| | | | | | | | | Add a comment about the logical block size for directories. Rename "bsize" in gfs2_block_map to "factor". Fix a typo in the description of metaptr1. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
* gfs2: Fix debugfs glocks dumpAndreas Gruenbacher2017-09-251-9/+5Star
| | | | | | | | | | | | | The switch to rhashtables (commit 88ffbf3e03) broke the debugfs glock dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a single buffer: the right function for restarting an rhashtable iteration from the beginning of the hash table is rhashtable_walk_enter; rhashtable_walk_stop + rhashtable_walk_start will just resume from the current position. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: stable@vger.kernel.org # v4.3+
* Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2017-09-138-14/+45
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf stat: Wait for the correct child perf tools: Support running perf binaries with a dash in their name perf config: Check not only section->from_system_config but also item's perf ui progress: Fix progress update perf ui progress: Make sure we always define step value perf tools: Open perf.data with O_CLOEXEC flag tools lib api: Fix make DEBUG=1 build perf tests: Fix compile when libunwind's unwind.h is available tools include linux: Guard against redefinition of some macros
| * Merge tag 'perf-urgent-for-mingo-4.14-20170912' of ↵Ingo Molnar2017-09-138-14/+45
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix TUI progress bar when delta from new total from that of the previous update is greater than the progress "step" (screen width progress bar block)) (Jiri Olsa) - Make tools/lib/api make DEBUG=1 build use -D_FORTIFY_SOURCE=2 not to cripple debuginfo, just like tools/perf/ does (Jiri Olsa) - Avoid leaking the 'perf.data' file to workloads started from the 'perf record' command line by using the O_CLOEXEC open flag (Jiri Olsa) - Fix building when libunwind's 'unwind.h' file is present in the include path, clashing with tools/perf/util/unwind.h (Milian Wolff) - Check per .perfconfig section entry flag, not just per section (Taeung Song) - Support running perf binaries with a dash in their name, needed to run perf as an AppImage (Milian Wolff) - Wait for the right child by using waitpid() when running workloads from 'perf stat', also to fix using perf as an AppImage (Milian Wolff) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * perf stat: Wait for the correct childMilian Wolff2017-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When packaging the perf userland application into an AppImage, the wait() call in perf stat returned too early. It turned out that some other child process exited, but not the one perf stat launched: $ sudo strace -e fork,execve,clone,wait4 -f ./perf-x86_64.AppImage stat sleep 1 execve("./perf-git.3a73b7f9-x86_64.AppImage", ["./perf-git.3a73b7f9-x86_64.AppIm"..., "stat", "sleep", "1"], 0x7ffec1bbf050 /* 18 vars */) = 0 clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f6a6e7efe50) = 3912 strace: Process 3912 attached [pid 3912] clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f6a6e7efe50) = 3914 strace: Process 3914 attached [pid 3912] +++ exited with 0 +++ [pid 3911] --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=3912, si_uid=0, si_status=0, si_utime=0, si_stime=0} --- [pid 3914] clone(strace: Process 3915 attached child_stack=0x7f6a6d9fefb0, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0x7f6a6d9ff9d0, tls=0x7f6a6d9ff700, child_tidptr=0x7f6a6d9ff9d0) = 3915 [pid 3911] execve("/tmp/.mount_perf-g6VYMpl/AppRun", ["./perf-git.3a73b7f9-x86_64.AppIm"..., "stat", "sleep", "1"], 0x14aab70 /* 21 vars */) = 0 [pid 3911] clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f4ae113c4d0) = 3916 strace: Process 3916 attached [pid 3911] wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 3912 [pid 3916] execve("/usr/libexec/perf-core/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/tmp/./sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/home/milian/.bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/usr/lib/icecream/libexec/icecc/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/ssd2/milian/projects/compiled/other/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/home/milian/.bin/kf5/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/ssd2/milian/projects/compiled/kf5/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/home/milian/projects/compiled/other/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/home/milian/projects/compiled/kf5/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/usr/local/sbin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/usr/local/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */) = -1 ENOENT (No such file or directory) [pid 3916] execve("/usr/bin/sleep", ["sleep", "1"], 0x27d3650 /* 22 vars */ Performance counter stats for 'sleep 1': <not counted> task-clock <not counted> context-switches <not counted> cpu-migrations <not counted> page-faults <not counted> cycles <not counted> instructions <not counted> branches <not counted> branch-misses 0.000047194 seconds time elapsed [pid 3916] --- SIGTERM {si_signo=SIGTERM, si_code=SI_USER, si_pid=3911, si_uid=0} --- [pid 3916] +++ killed by SIGTERM +++ [pid 3911] --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_KILLED, si_pid=3916, si_uid=0, si_status=SIGTERM, si_utime=0, si_stime=0} --- [pid 3915] --- SIGPIPE {si_signo=SIGPIPE, si_code=SI_USER, si_pid=3914, si_uid=0} --- [pid 3911] +++ exited with 0 +++ [pid 3915] --- SIGHUP {si_signo=SIGHUP, si_code=SI_USER, si_pid=3914, si_uid=0} --- [pid 3915] +++ exited with 0 +++ +++ exited with 0 +++ This patch uses waitpid instead to ensure the call waits for the debuggee application launched by 'perf stat'. This fixes 'perf stat' when launched from an AppImage: $ ./perf-x86_64.AppImage stat sleep 1 Performance counter stats for 'sleep 1': 0.357235 task-clock (msec) # 0.000 CPUs utilized 1 context-switches # 0.003 M/sec 0 cpu-migrations # 0.000 K/sec 50 page-faults # 0.140 M/sec 1269602 cycles # 3.554 GHz 654278 instructions # 0.52 insn per cycle 129963 branches # 363.803 M/sec 7082 branch-misses # 5.45% of all branches 1.000633420 seconds time elapsed Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170912152523.4497-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * perf tools: Support running perf binaries with a dash in their nameMilian Wolff2017-09-121-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the part behind "perf-" was interpreted as an internal perf command. If the suffix could not be handled, the execution was stopped. This makes it impossible to launch perf binaries that got renamed to have the `perf-` prefix. This is e.g. the case for appimages (e.g. "perf-x86_64.AppImage"), but would also apply to all other scenarios where users symlink or rename perf themselves: Status quo with the broken behavior: $ ln -s ./perf ./perf-custom-suffix $ ./perf-custom-suffix list cannot handle custom-suffix internally$ Also note the missing newline at the end of the error message. With this patch applied, the above works properly: $ ./perf-custom-suffix list List of pre-defined events (to be used in -e): ... Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Acked-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Yao Jin <yao.jin@linux.intel.com> Link: http://lkml.kernel.org/r/20170911111422.31903-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * perf config: Check not only section->from_system_config but also item'sTaeung Song2017-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently section->from_system_config is being checked multiple times. item->from_system_config should be checked instead, when iterating thru the items in a section. Fix it. Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1504754325-9724-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * perf ui progress: Fix progress updateJiri Olsa2017-09-121-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently update the 'next' variable only with a single step value. But it's possible the 'adv' update is bigger than single 'step' value. This would leave 'next' value under counted and force unnecessary ui_progress__ops->update calls. Calculate the amount of steps we need for 'adv' update and increase the 'next' with that amounts of steps. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170908120510.22515-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * perf ui progress: Make sure we always define step valueJiri Olsa2017-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unlikely, but we could have ui_progress__init being called with total < 16, which would set the next and step variables to 0. That would force unnecessary ui_progress__ops->update calls because 'next' would never raise. Forcing the next and step values to be always > 0. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170908120510.22515-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * perf tools: Open perf.data with O_CLOEXEC flagJiri Olsa2017-09-121-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not carry the perf.data file descriptor into the workload process and close it when perf executes the workload. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170908084621.31595-2-jolsa@kernel.org [ Add definitions for O_CLOEXEC for older systems ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * tools lib api: Fix make DEBUG=1 buildJiri Olsa2017-09-121-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not use -D_FORTIFY_SOURCE=2 for DEBUG build as it seems to mess up with debuginfo, which results in bad gdb experience. We already do that for tools/perf/. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170908084621.31595-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * perf tests: Fix compile when libunwind's unwind.h is availableMilian Wolff2017-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When cross compiling perf and I want to link against a self-compiled libunwind, I usually make the custom path where the libunwind headers exist visible by adding the libunwind prefix to the include path when compiling perf, i.e.: ~~~~~ $ ls $HOME/projects/compiled/other/include/ libunwind-coredump.h libunwind.h libunwind-x86_64.h libunwind-common.h libunwind-dynamic.h libunwind-ptrace.h unwind.h $ make EXTRA_CFLAGS="-I$HOME/projects/compiled/other/include/ ~~~~~~ Note the `unwind.h` header from libunwind which leads to compile errors when compiling tests/dwarf-unwind.c, since it shadows perf's util/unwind.h: ~~~~~ tests/dwarf-unwind.c:41:32: error: ‘struct unwind_entry’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror] static int unwind_entry(struct unwind_entry *entry, void *arg) ^~~~~~~~~~~~ tests/dwarf-unwind.c: In function ‘unwind_entry’: tests/dwarf-unwind.c:44:22: error: dereferencing pointer to incomplete type ‘struct unwind_entry’ char *symbol = entry->sym ? entry->sym->name : NULL; ^~ tests/dwarf-unwind.c: In function ‘unwind_thread’: tests/dwarf-unwind.c:92:8: error: implicit declaration of function ‘unwind__get_entries’; did you mean ‘unwind_entry’? [-Werror=implicit-function-declaration] err = unwind__get_entries(unwind_entry, &cnt, thread, ^~~~~~~~~~~~~~~~~~~ unwind_entry tests/dwarf-unwind.c:92:8: error: nested extern declaration of ‘unwind__get_entries’ [-Werror=nested-externs] ~~~~~~ Fix this compile error by specificing an explicit include of perf's unwind.h in the util folder. Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Yao Jin <yao.jin@linux.intel.com> Link: http://lkml.kernel.org/r/20170906150209.12579-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * tools include linux: Guard against redefinition of some macrosArnaldo Carvalho de Melo2017-09-121-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When cross building to android r15c (and older versions) on Fedora 26 we notice these: /opt/android-ndk-r15c/platforms/android-24/arch-arm/usr/include/sys/cdefs.h:332:0: note: this is the location of the previous definition For __aligned, __packed and __noreturn, so guard those with ifdefs to avoid drowning useful warnings in these. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-d7w3fa9c22dtmrwbedos6ie1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* | | Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2017-09-135-3/+25
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Three CPU hotplug related fixes and a debugging improvement" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add debugfs knob for "sched_debug" sched/core: WARN() when migrating to an offline CPU sched/fair: Plug hole between hotplug and active_load_balance() sched/fair: Avoid newidle balance for !active CPUs
| * | | sched/debug: Add debugfs knob for "sched_debug"Peter Zijlstra2017-09-123-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm forever late for editing my kernel cmdline, add a runtime knob to disable the "sched_debug" thing. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170907150614.142924283@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | sched/core: WARN() when migrating to an offline CPUPeter Zijlstra2017-09-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrating tasks to offline CPUs is a pretty big fail, warn about it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170907150614.094206976@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | sched/fair: Plug hole between hotplug and active_load_balance()Peter Zijlstra2017-09-121-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The load balancer applies cpu_active_mask to whatever sched_domains it finds, however in the case of active_balance there is a hole between setting rq->{active_balance,push_cpu} and running the stop_machine work doing the actual migration. The @push_cpu can go offline in this window, which would result in us moving a task onto a dead cpu, which is a fairly bad thing. Double check the active mask before the stop work does the migration. CPU0 CPU1 <SoftIRQ> stop_machine(takedown_cpu) load_balance() cpu_stopper_thread() ... work = multi_cpu_stop stop_one_cpu_nowait( /* wait for CPU0 */ .func = active_load_balance_cpu_stop ); </SoftIRQ> cpu_stopper_thread() work = multi_cpu_stop /* sync with CPU1 */ take_cpu_down() <idle> play_dead(); work = active_load_balance_cpu_stop set_task_cpu(p, CPU1); /* oops!! */ Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170907150614.044460912@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | sched/fair: Avoid newidle balance for !active CPUsPeter Zijlstra2017-09-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On CPU hot unplug, when parking the last kthread we'll try and schedule into idle to kill the CPU. This last schedule can (and does) trigger newidle balance because at this point the sched domains are still up because of commit: 77d1dfda0e79 ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds") Obviously pulling tasks to an already offline CPU is a bad idea, and all balancing operations _should_ be subject to cpu_active_mask, make it so. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 77d1dfda0e79 ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds") Link: http://lkml.kernel.org/r/20170907150613.994135806@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2017-09-1319-150/+107Star
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "The main changes are the PCID fixes from Andy, but there's also two hyperv fixes and two paravirt updates" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyper-v: Remove duplicated HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED definition x86/hyper-V: Allocate the IDT entry early in boot paravirt: Switch maintainer x86/paravirt: Remove no longer used paravirt functions x86/mm/64: Initialize CR4.PCIDE early x86/hibernate/64: Mask off CR3's PCID bits in the saved CR3 x86/mm: Get rid of VM_BUG_ON in switch_tlb_irqs_off()
| * | | | x86/hyper-v: Remove duplicated HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED definitionVitaly Kuznetsov2017-09-131-6/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commits: 7dcf90e9e032 ("PCI: hv: Use vPCI protocol version 1.2") 628f54cc6451 ("x86/hyper-v: Support extended CPU ranges for TLB flush hypercalls") added the same definition and they came in through different trees. Fix the duplication. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devel@linuxdriverproject.org Link: http://lkml.kernel.org/r/20170911150620.3998-1-vkuznets@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | x86/hyper-V: Allocate the IDT entry early in bootK. Y. Srinivasan2017-09-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate the hypervisor callback IDT entry early in the boot sequence. The previous code would allocate the entry as part of registering the handler when the vmbus driver loaded, and this caused a problem for the IDT cleanup that Thomas is working on for v4.15. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: apw@canonical.com Cc: devel@linuxdriverproject.org Cc: gregkh@linuxfoundation.org Cc: jasowang@redhat.com Cc: olaf@aepfle.de Link: http://lkml.kernel.org/r/20170908231557.2419-1-kys@exchange.microsoft.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | paravirt: Switch maintainerJuergen Gross2017-09-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jeremy Fitzhardinge is stepping down as a paravirt maintainer. I'll replace him. While at it, update the file list to the actual pattern. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: chrisw@sous-sol.org Cc: jeremy@goop.org Cc: rusty@rustcorp.com.au Cc: virtualization@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20170905143407.9227-1-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | x86/paravirt: Remove no longer used paravirt functionsJuergen Gross2017-09-1310-92/+12Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With removal of lguest some of the paravirt functions are no longer needed: ->read_cr4() ->store_idt() ->set_pmd_at() ->set_pud_at() ->pte_update() Remove them. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: boris.ostrovsky@oracle.com Cc: chrisw@sous-sol.org Cc: jeremy@goop.org Cc: rusty@rustcorp.com.au Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170904102527.25409-1-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | x86/mm/64: Initialize CR4.PCIDE earlyAndy Lutomirski2017-09-134-46/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cpu_init() is weird: it's called rather late (after early identification and after most MMU state is initialized) on the boot CPU but is called extremely early (before identification) on secondary CPUs. It's called just late enough on the boot CPU that its CR4 value isn't propagated to mmu_cr4_features. Even if we put CR4.PCIDE into mmu_cr4_features, we'd hit two problems. First, we'd crash in the trampoline code. That's fixable, and I tried that. It turns out that mmu_cr4_features is totally ignored by secondary_start_64(), though, so even with the trampoline code fixed, it wouldn't help. This means that we don't currently have CR4.PCIDE reliably initialized before we start playing with cpu_tlbstate. This is very fragile and tends to cause boot failures if I make even small changes to the TLB handling code. Make it more robust: initialize CR4.PCIDE earlier on the boot CPU and propagate it to secondary CPUs in start_secondary(). ( Yes, this is ugly. I think we should have improved mmu_cr4_features to actually control CR4 during secondary bootup, but that would be fairly intrusive at this stage. ) Signed-off-by: Andy Lutomirski <luto@kernel.org> Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 660da7c9228f ("x86/mm: Enable CR4.PCIDE on supported systems") Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | x86/hibernate/64: Mask off CR3's PCID bits in the saved CR3Andy Lutomirski2017-09-131-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jiri reported a resume-from-hibernation failure triggered by PCID. The root cause appears to be rather odd. The hibernation asm restores a CR3 value that comes from the image header. If the image kernel has PCID on, it's entirely reasonable for this CR3 value to have one of the low 12 bits set. The restore code restores it with CR4.PCIDE=0, which means that those low 12 bits are accepted by the CPU but are either ignored or interpreted as a caching mode. This is odd, but still works. We blow up later when the image kernel restores CR4, though, since changing CR4.PCIDE with CR3[11:0] != 0 is illegal. Boom! FWIW, it's entirely unclear to me what's supposed to happen if a PAE kernel restores a non-PAE image or vice versa. Ditto for LA57. Reported-by: Jiri Kosina <jikos@kernel.org> Tested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 660da7c9228f ("x86/mm: Enable CR4.PCIDE on supported systems") Link: http://lkml.kernel.org/r/18ca57090651a6341e97083883f9e814c4f14684.1504847163.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | x86/mm: Get rid of VM_BUG_ON in switch_tlb_irqs_off()Andy Lutomirski2017-09-131-1/+21
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we hit the VM_BUG_ON(), we're detecting a genuinely bad situation, but we're very unlikely to get a useful call trace. Make it a warning instead. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Jiri Kosina <jikos@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/3b4e06bbb382ca54a93218407c93925ff5871546.1504847163.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | | Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds2017-09-131-0/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull OpenRISC fixlet from Stafford Horne: "Fix warning for upcoming work to remove linux/vmalloc.h from asm-generic/io.h" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: add forward declaration for struct vm_area_struct
| * | | | openrisc: add forward declaration for struct vm_area_structTobias Klauser2017-09-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After removing linux/vmalloc.h from asm-generic/io.h, the following warning occurs on openrisc: In file included from arch/openrisc/include/asm/io.h:33:0, from include/linux/io.h:25, from drivers/tty/serial/earlycon.c:19: arch/openrisc/include/asm/pgtable.h:424:2: warning: 'struct vm_area_struct' declared inside parameter list unsigned long address, pte_t *pte) ^ arch/openrisc/include/asm/pgtable.h:424:2: warning: its scope is only this definition or declaration, which is probably not what you want Reported-by: kbuild test robot <lkp@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Stafford Horne <shorne@gmail.com>
* | | | | Merge tag 'modules-for-v4.14' of ↵Linus Torvalds2017-09-133-12/+31
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Summary of modules changes for the 4.14 merge window: - minor code cleanups and fixes - modpost: avoid building modules that have names that exceed the size of the name field in struct module" * tag 'modules-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Remove const attribute from alias for MODULE_DEVICE_TABLE module: fix ddebug_remove_module() modpost: abort if module name is too long
| * | | | | module: Remove const attribute from alias for MODULE_DEVICE_TABLEMatthias Kaehlcke2017-07-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MODULE_DEVICE_TABLE(type, name) creates an alias of type 'extern const typeof(name)'. If 'name' is already constant the 'const' attribute is specified twice, which is not allowed in C89 (see discussion at https://lkml.org/lkml/2017/5/23/1440). Since the kernel is built with -std=gnu89 clang generates warnings like this: drivers/thermal/x86_pkg_temp_thermal.c:509:1: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids); ^ ./include/linux/module.h:212:8: note: expanded from macro 'MODULE_DEVICE_TABLE' extern const typeof(name) __mod_##type##__##name##_device_table Remove the const attribute from the alias to avoid the duplicate specifier. After all it is only an alias and the attribute shouldn't have any effect. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
| * | | | | module: fix ddebug_remove_module()Zhou Chengming2017-07-251-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ddebug_remove_module() use mod->name to find the ddebug_table of the module and remove it. But dynamic_debug_setup() use the first _ddebug->modname to create ddebug_table for the module. It's ok when the _ddebug->modname is the same with the mod->name. But livepatch module is special, it may contain _ddebugs of other modules, the modname of which is different from the name of livepatch module. So ddebug_remove_module() can't use mod->name to find the right ddebug_table and remove it. It can cause kernel crash when we cat the file <debugfs>/dynamic_debug/control. Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
| * | | | | modpost: abort if module name is too longWanlong Gao2017-07-251-5/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Module name has a limited length, but currently the build system allows the build finishing even if the module name is too long. CC /root/kprobe_example/abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz.mod.o /root/kprobe_example/abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz.mod.c:9:2: warning: initializer-string for array of chars is too long [enabled by default] .name = KBUILD_MODNAME, ^ but it's merely a warning. This patch adds the check of the module name length in modpost and stops the build properly. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
* | | | | | Fix up MAINTAINERS file sortingLinus Torvalds2017-09-131-55/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another merge window, another MAINTAINERS file disaster. People have serious problems with the alphabet and sorting, and poor Jérôme Glisse and Radim Krčmář get their names mangled by locale issues, turning them into some mangled mess (probably others do too, but those two stood out when sorting things again). And we now have two copies of the same 'AS3645A LED FLASH CONTROLLER DRIVER' in the tree and in the MAINTAINERS file, but that's a separate issue - the duplication is real, and I left them as two entries for the same name. This does not try to sort the actual section pattern entries, although I may end up doing that later. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Merge tag 'clk-for-linus' of ↵Linus Torvalds2017-09-13142-1101/+9354
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
| * | | | | | clk: si5351: fix PLL resetRussell King2017-09-021-7/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changing the audio sample rate on the SolidRun Cubox disrupts the video output. The Si5351 provides both the video clock (using PLLA on output 0) and the audio clock (using PLLB on output 2). When the rate of clock output 2 is changed, it reconfigures PLLB, which results in both PLLA and PLLB being reset. The reset of PLLA causes clock output 0 to be disrupted, thereby causing a loss of sync by the attached display device. Hence, each time the audio sample rate changes (eg, when a video player starts up, or when starting to play music) the video display momentarily blanks while the Si5351 settles down. Prior to the commit below, this behaviour did not happen. Fix this by only resetting only the PLL which has been changed. Fixes: 6dc669a22c77 ("clk: si5351: Add PLL soft reset") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | ASoC: atmel-classd: remove aclk clockQuentin Schulz2017-09-021-33/+14Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since gclk (generated-clk) is now able to determine the rate of the audio_pll, there is no need for classd to have a direct phandle to the audio_pll while already having a phandle to gclk. Thus, remove all mentions to aclk in classd driver and update macros and variable names. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | ASoC: atmel-classd: remove aclk clock from DT bindingQuentin Schulz2017-09-021-6/+3Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since gclk (generated-clk) is now able to determine the rate of the audio_pll, there is no need for classd to have a direct phandle to the audio_pll while already having a phandle to gclk. This binding is used by no board in mainline so it is safe to be modified. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: at91: clk-generated: make gclk determine audio_pll rateQuentin Schulz2017-09-021-6/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows gclk to determine audio_pll rate and set the parent rate accordingly. However, there are multiple children clocks that could technically change the rate of audio_pll (via gck). With the rate locking, the first consumer to enable the clock will be the one definitely setting the rate of the clock. Since audio IPs are most likely to request the same rate, we enforce that the only clks able to modify gck rate are those of audio IPs. To remain consistent, we deny other clocks to be children of audio_pll. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: at91: clk-generated: create function to find best_diffQuentin Schulz2017-09-021-14/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way to find the best_diff and do the appropriate process afterwards can be re-used. This patch prepares the driver for an upcoming patch that will allow clk_generated to determine the rate of the audio_pll. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: at91: add audio pll clock driversQuentin Schulz2017-09-024-0/+566
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new clock driver set allows to have a fractional divided clock that would generate a precise clock particularly suitable for audio applications. The main audio pll clock has two children clocks: one that is connected to the PMC, the other that can directly drive a pad. As these two routes have different enable bits and different dividers and divider formulas, they are handled by two different drivers. Each of them could modify the rate of the main audio pll parent. The main audio pll clock can output 620MHz to 700MHz. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | dt-bindings: clk: at91: add audio plls to the compatible listQuentin Schulz2017-09-021-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new clock driver set allows to have a fractional divided clock that would generate a precise clock particularly suitable for audio applications. The main audio pll clock has two children clocks: one that is connected to the PMC, the other that can directly drive a pad. As these two routes have different enable bits and different dividers and divider formulas, they are handled by two different drivers. This adds the audio plls (frac, pad and pmc) to the compatible list of at91 clocks in DT binding. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: at91: clk-generated: remove useless divisor loopQuentin Schulz2017-09-021-13/+12Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver requests the current clk rate of each of its parent clocks to decide whether a clock rate is suitable or not. It does not request determine_rate from a parent clock which could request a rate change in parent clock (i.e. there is no parent rate propagation). We know the rate we want (passed along req argument of the function) and the parent clock rate, thus we know the closest rounded divisor, we don't need to iterate over the available divisors to find the best one for a given clock. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: mb86s7x: Drop non-building driverAndreas Färber2017-09-012-391/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It fails to build once we introduce the ARCH_MB86S7X Kconfig symbol: drivers/clk/clk-mb86s7x.c:27:10: fatal error: soc/mb86s7x/scb_mhu.h: No such file or directory #include <soc/mb86s7x/scb_mhu.h> ^~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. And when commenting out that line, we get: drivers/clk/clk-mb86s7x.c: In function 'crg_gate_control': drivers/clk/clk-mb86s7x.c:72:8: error: implicit declaration of function 'mb86s7x_send_packet' [-Werror=implicit-function-declaration] ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ, ^~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:72:28: error: 'CMD_PERI_CLOCK_GATE_SET_REQ' undeclared (first use in this function) ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ, ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:72:28: note: each undeclared identifier is reported only once for each function it appears in drivers/clk/clk-mb86s7x.c: In function 'crg_rate_control': drivers/clk/clk-mb86s7x.c:116:10: error: 'CMD_PERI_CLOCK_RATE_SET_REQ' undeclared (first use in this function) code = CMD_PERI_CLOCK_RATE_SET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:121:10: error: 'CMD_PERI_CLOCK_RATE_GET_REQ' undeclared (first use in this function); did you mean 'CMD_PERI_CLOCK_RATE_SET_REQ'? code = CMD_PERI_CLOCK_RATE_GET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~~ CMD_PERI_CLOCK_RATE_SET_REQ drivers/clk/clk-mb86s7x.c: In function 'mhu_cluster_rate': drivers/clk/clk-mb86s7x.c:276:10: error: 'CMD_CPU_CLOCK_RATE_GET_REQ' undeclared (first use in this function) code = CMD_CPU_CLOCK_RATE_GET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:278:10: error: 'CMD_CPU_CLOCK_RATE_SET_REQ' undeclared (first use in this function); did you mean 'CMD_CPU_CLOCK_RATE_GET_REQ'? code = CMD_CPU_CLOCK_RATE_SET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~ CMD_CPU_CLOCK_RATE_GET_REQ cc1: some warnings being treated as errors scripts/Makefile.build:302: recipe for target 'drivers/clk/clk-mb86s7x.o' failed make[2]: *** [drivers/clk/clk-mb86s7x.o] Error 1 Remove the driver for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: ti: check for null return in strrchr to avoid null dereferencingColin Ian King2017-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | strrchr can potentially return a null so the following strlen on the null pointer can cause a null dereference. Add a check to see if the string postfix is not null before calling strlen. Detected by CoverityScan, CID#1452039 ("Dereference null return") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: Don't write error code into divider registerAlex Frid2017-09-011-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a check for error returned by divider value calculation to avoid writing error code into hw register. Signed-off-by: Alex Frid <afrid@nvidia.com> Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Mayo <jmayo@nvidia.com> Fixes: bca9690b9426 ("clk: divider: Make generic for usage elsewhere") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: uniphier: add video input subsystem clockKatsuhiro Suzuki2017-09-011-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a clock for video input subsystem (EXIV) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: uniphier: add audio system clockKatsuhiro Suzuki2017-09-011-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add clock for audio subsystem (AIO) and SoC internal audio codec (EVEA) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: stm32h7: Add stm32h743 clock driverGabriel Fernandez2017-09-015-0/+1783
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables clocks for STM32H743 boards. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> for MFD changes: Acked-by: Lee Jones <lee.jones@linaro.org> for DT-Bindings Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | | | clk: gate: expose clk_gate_ops::is_enabledGabriel Fernandez2017-09-012-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch exposes clk_gate_ops::is_enabled as functions that can be directly called and assigned in places like this so we don't need wrapper functions that do nothing besides forward the call. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-09-06 01:28:48 +0200