summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* s390/uaccess: simplify control register updatesMartin Schwidefsky2014-05-208-43/+33Star
| | | | | | | | | | | | | Always switch to the kernel ASCE in switch_mm. Load the secondary space ASCE in finish_arch_post_lock_switch after checking that any pending page table operations have completed. The primary ASCE is loaded in entry[64].S. With this the update_primary_asce call can be removed from the switch_to macro and from the start of switch_mm function. Remove the load_primary argument from update_user_asce/clear_user_asce, rename update_user_asce to set_user_asce and rename update_primary_asce to load_kernel_asce. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/smp: Avoid busy loop after halt and "begin" on z/VMMichael Holzheu2014-05-202-12/+2Star
| | | | | | | | | | | Currently the smp_stop_cpu() function for SMP kernels enters a busy loop when "begin" is entered on the z/VM console after Linux is halted. To avoid this behavior, use the non-SMP variant of smp_stop_cpu() which stops the CPU again after "begin" is entered. As a side effect we now have consistent behavior for SMP and non-SMP Linux. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390: fix new ccwgroup.h kernel-doc warningRandy Dunlap2014-05-201-0/+2
| | | | | | | | | | | | | | | | Fix new s390 kernel-doc warning: Warning(arch/s390/include/asm/ccwgroup.h:27): No description found for parameter 'ungroup_work' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/zfcpdump: Update documentation in zfcpdump.txtMichael Holzheu2014-05-201-53/+18Star
| | | | | | | | | | | | | | Do the following changes: - Document new /proc/vmcore interface - Document partition dump external initramfs with s390-tools-1.24.0 - Remove initramfs config file because initramfs is now built automatically in s390-tools - Replace description of kernel config options with "make zfcpdump_defconfig" - Some editorial changes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/dump: Remove CONFIG_ZFCPDUMPMichael Holzheu2014-05-205-20/+11Star
| | | | | | | | | | | Currently there are two s390 kernel dump config options "CONFIG_ZFCPDUMP" and "CONFIG_CRASH_DUMP". In order to keep things simple and because the "CONFIG_ZFCPDUMP" option already has a dependency to "CONFIG_CRASH_DUMP" remove the CONFIG_ZFCPDUMP option. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/cmma: remove "cmma disable" code in case of dump againHeiko Carstens2014-05-201-10/+0Star
| | | | | | | | This is not necessary anymore, since the offending code is gone with the conversion to the memblock code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>- Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/spinlock: optimize spinlock code sequencePhilipp Hachtmann2014-05-205-10/+21
| | | | | | | | | Use lowcore constant to improve the code generated for spinlocks. [ Martin Schwidefsky: patch breakdown and code beautification ] Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/spinlock: cleanup spinlock codePhilipp Hachtmann2014-05-203-77/+82
| | | | | | | | | | | | | | Improve the spinlock code in several aspects: - Have _raw_compare_and_swap return true if the operation has been successful instead of returning the old value. - Remove the "volatile" from arch_spinlock_t and arch_rwlock_t - Rename 'owner_cpu' to 'lock' - Add helper functions arch_spin_trylock_once / arch_spin_tryrelease_once [ Martin Schwidefsky: patch breakdown and code beautification ] Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/mm: Convert bootmem to memblockPhilipp Hachtmann2014-05-2010-498/+270Star
| | | | | | | | | | | The original bootmem allocator is getting replaced by memblock. To cover the needs of the s390 kdump implementation the physical memory list is used. With this patch the bootmem allocator and its bitmaps are completely removed from s390. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* mm/memblock: add physical memory listPhilipp Hachtmann2014-05-203-0/+19
| | | | | | | | | | | Add the physmem list to the memblock structure. This list only exists if HAVE_MEMBLOCK_PHYS_MAP is selected and contains the unmodified list of physically available memory. It differs from the memblock memory list as it always contains all memory ranges even if the memory has been restricted, e.g. by use of the mem= kernel parameter. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* mm/memblock: Do some refactoring, enhance APIPhilipp Hachtmann2014-05-202-85/+183
| | | | | | | | | | | | | | | | | | | | | Refactor the memblock code and extend the memblock API to make it more flexible. With the extended API it is simple to define and work with additional memory lists. The static functions memblock_add_region and __memblock_remove are renamed to memblock_add_range and meblock_remove_range and added to the memblock API. The __next_free_mem_range and __next_free_mem_range_rev functions are replaced with calls to the more generic list walkers __next_mem_range and __next_mem_range_rev. To walk an arbitrary memory list two new macros for_each_mem_range and for_each_mem_range_rev are added. These new macros are used to define for_each_free_mem_range and for_each_free_mem_range_reverse. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'parisc-3.15-4' of ↵Linus Torvalds2014-05-204-46/+65
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "There are two patches in here: The first patch greatly improves latency and corrects the memory ordering in our light-weight atomic locking syscall. The second patch ratelimits printing of userspace segfaults in the same way as it's done on other platforms. This fixes a possible DOS on parisc since it prevents the syslog to grow too fast. For example, when the debian acl2 package was built on our debian buildd servers, this package produced lots of gigabytes in syslog in very short time and thus filled our harddisks, which then turned the server nearly completely unaccessible and unresponsive" * 'parisc-3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Improve LWS-CAS performance parisc: ratelimit userspace segfault printing
| * parisc: Improve LWS-CAS performanceJohn David Anglin2014-05-151-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The attached change significantly improves the performance of the LWS-CAS code in syscall.S. This allows a number of packages to build (e.g., zeromq3, gtest and libxs) that previously failed because slow LWS-CAS performance under contention. In particular, interrupts taken while the lock was taken degraded performance significantly. The change does the following: 1) Disables interrupts around the CAS operation, and 2) Changes the loads and stores to use the ordered completer, "o", on PA 2.0. "o" and "ma" with a zero offset are equivalent. The latter is accepted on both PA 1.X and 2.0. The use of ordered loads and stores probably makes no difference on all existing hardware, but it seemed pedantically correct. In particular, the CAS operation must complete before LDCW lock is released. As written before, a processor could reorder the operations. I don't believe the period interrupts are disabled is long enough to significantly increase interrupt latency. For example, the TLB insert code is longer. Worst case is a memory fault in the CAS operation. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: Helge Deller <deller@gmx.de>
| * parisc: ratelimit userspace segfault printingHelge Deller2014-05-153-43/+56
| | | | | | | | | | | | | | | | | | | | Ratelimit printing of userspace segfaults and make it runtime configurable via the /proc/sys/debug/exception-trace variable. This should resolve syslog from growing way too fast and thus prevents possible system service attacks. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
* | Merge tag 'arm64-fixes' of ↵Linus Torvalds2014-05-202-3/+11
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull two arm64 fixes from Catalin Marinas: - arm64 migrate_irqs() fix following commit ffde1de64012 (irqchip: Gic: Support forced affinity setting) - fix arm64 pud_huge() to return 0 when only 2 levels page tables are used (__PAGETABLE_PMD_FOLDED defined and pmd_huge already covers block entries at the first level), otherwise KVM gets confused * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix pud_huge() for 2-level pagetables arm64: use cpu_online_mask when using forced irq_set_affinity
| * | arm64: fix pud_huge() for 2-level pagetablesMark Salter2014-05-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following happens when trying to run a kvm guest on a kernel configured for 64k pages. This doesn't happen with 4k pages: BUG: failure at include/linux/mm.h:297/put_page_testzero()! Kernel panic - not syncing: BUG! CPU: 2 PID: 4228 Comm: qemu-system-aar Tainted: GF 3.13.0-0.rc7.31.sa2.k32v1.aarch64.debug #1 Call trace: [<fffffe0000096034>] dump_backtrace+0x0/0x16c [<fffffe00000961b4>] show_stack+0x14/0x1c [<fffffe000066e648>] dump_stack+0x84/0xb0 [<fffffe0000668678>] panic+0xf4/0x220 [<fffffe000018ec78>] free_reserved_area+0x0/0x110 [<fffffe000018edd8>] free_pages+0x50/0x88 [<fffffe00000a759c>] kvm_free_stage2_pgd+0x30/0x40 [<fffffe00000a5354>] kvm_arch_destroy_vm+0x18/0x44 [<fffffe00000a1854>] kvm_put_kvm+0xf0/0x184 [<fffffe00000a1938>] kvm_vm_release+0x10/0x1c [<fffffe00001edc1c>] __fput+0xb0/0x288 [<fffffe00001ede4c>] ____fput+0xc/0x14 [<fffffe00000d5a2c>] task_work_run+0xa8/0x11c [<fffffe0000095c14>] do_notify_resume+0x54/0x58 In arch/arm/kvm/mmu.c:unmap_range(), we end up doing an extra put_page() on the stage2 pgd which leads to the BUG in put_page_testzero(). This happens because a pud_huge() test in unmap_range() returns true when it should always be false with 2-level pages tables used by 64k pages. This patch removes support for huge puds if 2-level pagetables are being used. Signed-off-by: Mark Salter <msalter@redhat.com> [catalin.marinas@arm.com: removed #ifndef around PUD_SIZE check] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> # v3.11+
| * | arm64: use cpu_online_mask when using forced irq_set_affinitySudeep Holla2014-05-121-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 01f8fa4f01d8("genirq: Allow forcing cpu affinity of interrupts") enabled the forced irq_set_affinity which previously refused to route an interrupt to an offline cpu. Commit ffde1de64012("irqchip: Gic: Support forced affinity setting") implements this force logic and disables the cpu online check for GIC interrupt controller. When __cpu_disable calls migrate_irqs, it disables the current cpu in cpu_online_mask and uses forced irq_set_affinity to migrate the IRQs away from the cpu but passes affinity mask with the cpu being offlined also included in it. When calling irq_set_affinity with force == true in a cpu hotplug path, the caller must ensure that the cpu being offlined is not present in the affinity mask or it may be selected as the target CPU, leading to the interrupt not being migrated. This patch uses cpu_online_mask when using forced irq_set_affinity so that the IRQs are properly migrated away. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | | Merge tag 'metag-for-v3.15-2' of ↵Linus Torvalds2014-05-2010-22/+33
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull Metag architecture and related fixes from James Hogan: "Mostly fixes for metag and parisc relating to upgrowing stacks. - Fix missing compiler barriers in metag memory barriers. - Fix BUG_ON on metag when RLIMIT_STACK hard limit is increased beyond safe value. - Make maximum stack size configurable. This reduces the default user stack size back to 80MB (especially on parisc after their removal of _STK_LIM_MAX override). This only affects metag and parisc. - Remove metag _STK_LIM_MAX override to match other arches and follow parisc, now that it is safe to do so (due to the BUG_ON fix mentioned above). - Finally now that both metag and parisc _STK_LIM_MAX overrides have been removed, it makes sense to remove _STK_LIM_MAX altogether" * tag 'metag-for-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: asm-generic: remove _STK_LIM_MAX metag: Remove _STK_LIM_MAX override parisc,metag: Do not hardcode maximum userspace stack size metag: Reduce maximum stack size to 256MB metag: fix memory barriers
| * | | asm-generic: remove _STK_LIM_MAXJames Hogan2014-05-152-8/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _STK_LIM_MAX could be used to override the RLIMIT_STACK hard limit from an arch's include/uapi/asm-generic/resource.h file, but is no longer used since both parisc and metag removed the override. Therefore remove it entirely, setting the hard RLIMIT_STACK limit to RLIM_INFINITY directly in include/asm-generic/resource.h. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: John David Anglin <dave.anglin@bell.net>
| * | | metag: Remove _STK_LIM_MAX overrideJames Hogan2014-05-152-8/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Meta overrode _STK_LIM_MAX (the default RLIMIT_STACK hard limit) to 256MB, apparently in an attempt to prevent setup_arg_pages's STACK_GROWSUP code from choosing the maximum stack size of 1GB, which is far too large for Meta's limited virtual address space and hits a BUG_ON (stack_top is usually 0x3ffff000). However the commit "metag: Reduce maximum stack size to 256MB" reduces the absolute stack size limit to a safe value for metag. This allows the default _STK_LIM_MAX override to be removed, bringing the default behaviour in line with all other architectures. Parisc in particular recently removed their override of _STK_LIMT_MAX in commit e0d8898d76a7 (parisc: remove _STK_LIM_MAX override) since it subtly affects stack allocation semantics in userland. Meta's uapi/asm/resource.h can now be removed and switch to using generic-y. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net>
| * | | parisc,metag: Do not hardcode maximum userspace stack sizeHelge Deller2014-05-154-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch affects only architectures where the stack grows upwards (currently parisc and metag only). On those do not hardcode the maximum initial stack size to 1GB for 32-bit processes, but make it configurable via a config option. The main problem with the hardcoded stack size is, that we have two memory regions which grow upwards: stack and heap. To keep most of the memory available for heap in a flexmap memory layout, it makes no sense to hard allocate up to 1GB of the memory for stack which can't be used as heap then. This patch makes the stack size for 32-bit processes configurable and uses 80MB as default value which has been in use during the last few years on parisc and which hasn't showed any problems yet. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net>
| * | | metag: Reduce maximum stack size to 256MBJames Hogan2014-05-153-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specify the maximum stack size for arches where the stack grows upward (parisc and metag) in asm/processor.h rather than hard coding in fs/exec.c so that metag can specify a smaller value of 256MB rather than 1GB. This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased beyond a safe value by root. E.g. when starting a process after running "ulimit -H -s unlimited" it will then attempt to use a stack size of the maximum 1GB which is far too big for metag's limited user virtual address space (stack_top is usually 0x3ffff000): BUG: failure at fs/exec.c:589/shift_arg_pages()! Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # only needed for >= v3.9 (arch/metag)
| * | | metag: fix memory barriersMikulas Patocka2014-05-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Volatile access doesn't really imply the compiler barrier. Volatile access is only ordered with respect to other volatile accesses, it isn't ordered with respect to general memory accesses. Gcc may reorder memory accesses around volatile access, as we can see in this simple example (if we compile it with optimization, both increments of *b will be collapsed to just one): void fn(volatile int *a, long *b) { (*b)++; *a = 10; (*b)++; } Consequently, we need the compiler barrier after a write to the volatile variable, to make sure that the compiler doesn't reorder the volatile write with something else. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: James Hogan <james.hogan@imgtec.com>
* | | | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2014-05-207-29/+141
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm/intel fixes from Dave Airlie: "Just some intel fixes. I have some radeon ones but I need to get some patches dropped from the pull req" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Increase WM memory latency values on SNB drm/i915: restore backlight precision when converting from ACPI drm/i915: Use the first mode if there is no preferred mode in the EDID drm/i915/dp: force eDP lane count to max available lanes on BDW drm/i915/vlv: reset VLV media force wake request register drm/i915/SDVO: For sysfs link put directory and target in correct order drm/i915: use lane count and link rate from VBT as minimums for eDP drm/i915: clean up VBT eDP link param decoding drm/i915: consider the source max DP lane count too
| * \ \ \ Merge tag 'drm-intel-fixes-2014-05-16' of ↵Dave Airlie2014-05-207-29/+141
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-fixes Intel fixes for regressions, black screens and hangs, for 3.15. * tag 'drm-intel-fixes-2014-05-16' of git://anongit.freedesktop.org/drm-intel: drm/i915: Increase WM memory latency values on SNB drm/i915: restore backlight precision when converting from ACPI drm/i915: Use the first mode if there is no preferred mode in the EDID drm/i915/dp: force eDP lane count to max available lanes on BDW drm/i915/vlv: reset VLV media force wake request register drm/i915/SDVO: For sysfs link put directory and target in correct order drm/i915: use lane count and link rate from VBT as minimums for eDP drm/i915: clean up VBT eDP link param decoding drm/i915: consider the source max DP lane count too
| | * | | | drm/i915: Increase WM memory latency values on SNBVille Syrjälä2014-05-151-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On SNB the BIOS provided WM memory latency values seem insufficient to handle high resolution displays. In this particular case the display mode was a 2560x1440@60Hz, which makes the pixel clock 241.5 MHz. It was empirically found that a memory latency value if 1.2 usec is enough to avoid underruns, whereas the BIOS provided value of 0.7 usec was clearly too low. Incidentally 1.2 usec is what the typical BIOS provided values are on IVB systems. Increase the WM memory latency values to at least 1.2 usec on SNB. Hopefully this won't have a significant effect on power consumption. v2: Increase the latency values regardless of the pixel clock Cc: Robert N <crshman@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70254 Tested-by: Robert Navarro <crshman@gmail.com> Tested-by: Vitaly Minko <vitaly.minko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915: restore backlight precision when converting from ACPIAaron Lu2014-05-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we set backlight on behalf of ACPI opregion, we will convert the backlight value in the 0-255 range defined in opregion to the actual hardware level. Commit 22505b82a2 (drm/i915: avoid brightness overflow when doing scale) is meant to fix the overflow problem when doing the conversion, but it also caused a problem that the converted hardware level doesn't quite represent the intended value: say user wants maximum backlight level(255 in opregion's range), then we will calculate the actual hardware level to be: level = freq / max * level, where freq is the hardware's max backlight level(937 on an user's box), and max and level are all 255. The converted value should be 937 but the above calculation will yield 765. To fix this issue, just use 64 bits to do the calculation to keep the precision and avoid overflow at the same time. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491 Reported-by: Nico Schottelius <nico-bugzilla.kernel.org@schottelius.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915: Use the first mode if there is no preferred mode in the EDIDChris Wilson2014-05-151-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This matches the algorithm used by earlier kernels when selecting the mode for the fbcon. And only if there is no modes at all, do we fall back to using the BIOS configuration. Seamless transition is still preserved (from the BIOS configuration to ours) so long as the BIOS has also chosen what we hope is the native configuration. Reported-by: Knut Petersen <Knut_Petersen@t-online.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655 Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [Jani: applied Chris' "Please imagine that I wrote this correctly."] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915/dp: force eDP lane count to max available lanes on BDWJani Nikula2014-05-151-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are certain BDW high res eDP machines that regressed due to commit 38aecea0ccbb909d635619cba22f1891e589b434 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Mar 3 11:18:10 2014 +0100 drm/i915: reverse dp link param selection, prefer fast over wide again The commit lead to 2 lanes at 5.4 Gbps being used instead of 4 lanes at 2.7 Gbps on the affected machines. Link training succeeded for both, but the screen remained blank with the former config. Further investigation showed that 4 lanes at 5.4 Gbps worked also. The root cause for the blank screen using 2 lanes remains unknown, but apparently the driver for a certain other operating system by default uses the max available lanes. Follow suit on Broadwell eDP, for at least until we figure out what is going on. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76711 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915/vlv: reset VLV media force wake request registerJani Nikula2014-05-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Media force wake get hangs the machine when the system is booted without displays attached. The assumption is that (at least some versions of) the firmware has skipped some initialization in that case. Empirical evidence suggests we need to reset the media force wake request register in addition to the render one to avoid hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75895 Reported-by: Imre Deak <imre.deak@intel.com> Reported-by: Darren Hart <dvhart@linux.intel.com> Tested-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915/SDVO: For sysfs link put directory and target in correct orderEgbert Eich2014-05-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When linking the i2c sysfs file into the connector's directory pass directory and link target in the right order. This code was introduced with: commit 931c1c26983b4f84e33b78579fc8d57e4a14c6b4 Author: Imre Deak <imre.deak@intel.com> Date: Tue Feb 11 17:12:51 2014 +0200 drm/i915: sdvo: add i2c sysfs symlink to the connector's directory This is the same what we do for DP connectors, so make things more consistent. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915: use lane count and link rate from VBT as minimums for eDPJani Nikula2014-05-071-7/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most likely the minimums for both should be enough for enabling the native resolution on the eDP, and we'll end up using the predetermined optimal link config for the panel. v2: Add debug prints. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73539 Tested-by: Markus Blank-Burian <burian@muenster.de> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915: clean up VBT eDP link param decodingJani Nikula2014-05-071-14/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use defines, do not set anything if VBT has values unknown to us. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915: consider the source max DP lane count tooPaulo Zanoni2014-05-071-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if the panel claims it can support 4 lanes, there's the possibility that the HW can't, so consider this while selecting the max lane count. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* | | | | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2014-05-205-5/+17
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, modify_ldt: Make support for 16-bit segments a runtime option x86, mm, hugetlb: Add missing TLB page invalidation for hugetlb_cow() x86, rdrand: When nordrand is specified, disable RDSEED as well
| * | | | | | x86-64, modify_ldt: Make support for 16-bit segments a runtime optionLinus Torvalds2014-05-152-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Checkin: b3b42ac2cbae x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels disabled 16-bit segments on 64-bit kernels due to an information leak. However, it does seem that people are genuinely using Wine to run old 16-bit Windows programs on Linux. A proper fix for this ("espfix64") is coming in the upcoming merge window, but as a temporary fix, create a sysctl to allow the administrator to re-enable support for 16-bit segments. It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If you hit this issue and care about your old Windows program more than you care about a kernel stack address information leak, you can do echo 1 > /proc/sys/abi/ldt16 as root (add it to your startup scripts), and you should be ok. The sysctl table is only added if you have COMPAT support enabled on x86-64, but I assume anybody who runs old windows binaries very much does that ;) Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com Cc: <stable@vger.kernel.org>
| * | | | | | x86, mm, hugetlb: Add missing TLB page invalidation for hugetlb_cow()Anthony Iliopoulos2014-05-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The invalidation is required in order to maintain proper semantics under CoW conditions. In scenarios where a process clones several threads, a thread operating on a core whose DTLB entry for a particular hugepage has not been invalidated, will be reading from the hugepage that belongs to the forked child process, even after hugetlb_cow(). The thread will not see the updated page as long as the stale DTLB entry remains cached, the thread attempts to write into the page, the child process exits, or the thread gets migrated to a different processor. Signed-off-by: Anthony Iliopoulos <anthony.iliopoulos@huawei.com> Link: http://lkml.kernel.org/r/20140514092948.GA17391@server-36.huawei.corp Suggested-by: Shay Goikhman <shay.goikhman@huawei.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v2.6.16+ (!)
| * | | | | | x86, rdrand: When nordrand is specified, disable RDSEED as wellH. Peter Anvin2014-05-122-4/+5
| | |_|/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One can logically expect that when the user has specified "nordrand", the user doesn't want any use of the CPU random number generator, neither RDRAND nor RDSEED, so disable both. Reported-by: Stephan Mueller <smueller@chronox.de> Cc: Theodore Ts'o <tytso@mit.edu> Link: http://lkml.kernel.org/r/21542339.0lFnPSyGRS@myon.chronox.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | | | | | Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2014-05-201-4/+4
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single bug fix for a long standing issue: - Updating the expiry value of a relative timer _after_ letting the idle logic select a target cpu for the timer based on its stale expiry value is outright stupid. Thanks to Viresh for spotting the brainfart" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Set expiry time before switch_hrtimer_base()
| * | | | | | hrtimer: Set expiry time before switch_hrtimer_base()Viresh Kumar2014-05-121-4/+4
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | switch_hrtimer_base() calls hrtimer_check_target() which ensures that we do not migrate a timer to a remote cpu if the timer expires before the current programmed expiry time on that remote cpu. But __hrtimer_start_range_ns() calls switch_hrtimer_base() before the new expiry time is set. So the sanity check in hrtimer_check_target() is operating on stale or even uninitialized data. Update expiry time before calling switch_hrtimer_base(). [ tglx: Rewrote changelog once again ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: linaro-networking@linaro.org Cc: fweisbec@gmail.com Cc: arvind.chauhan@arm.com Link: http://lkml.kernel.org/r/81999e148745fc51bbcd0615823fbab9b2e87e23.1399882253.git.viresh.kumar@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | | | | Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2014-05-202-0/+13
|\ \ \ \ \ \ | |_|/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two small updates from the irq departement: - Provide missing inline stub for a SMP only function - Add sub-maintainer for the drivers/irqchip/ part of the irq subsystem. YAY!" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add co-maintainer for drivers/irqchip genirq: Provide irq_force_affinity fallback for non-SMP
| * | | | | MAINTAINERS: Add co-maintainer for drivers/irqchipJason Cooper2014-05-131-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thomas Gleixner has asked me to assist with the review and merging of patches for the irqchip subsystem. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1400006821-32145-1-git-send-email-jason@lakedaemon.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | | | | genirq: Provide irq_force_affinity fallback for non-SMPArnd Bergmann2014-05-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch 01f8fa4f01d "genirq: Allow forcing cpu affinity of interrupts" added an irq_force_affinity() function, and 30ccf03b4a6 "clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup" subsequently uses it. However, the driver can be used with CONFIG_SMP disabled, but the function declaration is only available for CONFIG_SMP, leading to this build error: drivers/clocksource/exynos_mct.c:431:3: error: implicit declaration of function 'irq_force_affinity' [-Werror=implicit-function-declaration] irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu)); This patch introduces a dummy helper function for the non-SMP case that always returns success, to get rid of the build error. Since the patches causing the problem are marked for stable backports, this one should be as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/5619084.0zmrrIUZLV@wuerfel Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | | | | Merge tag 'locks-v3.15-4' of git://git.samba.org/jlayton/linuxLinus Torvalds2014-05-131-12/+24
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull file locking fix from Jeff Layton: "Fix for regression in handling of F_GETLK commands" * tag 'locks-v3.15-4' of git://git.samba.org/jlayton/linux: locks: only validate the lock vs. f_mode in F_SETLK codepaths
| * | | | | | locks: only validate the lock vs. f_mode in F_SETLK codepathsJeff Layton2014-05-091-12/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v2: replace missing break in switch statement (as pointed out by Dave Jones) commit bce7560d4946 (locks: consolidate checks for compatible filp->f_mode values in setlk handlers) introduced a regression in the F_GETLK handler. flock64_to_posix_lock is a shared codepath between F_GETLK and F_SETLK, but the f_mode checks should only be applicable to the F_SETLK codepaths according to POSIX. Instead of just reverting the patch, add a new function to do this checking and have the F_SETLK handlers call it. Cc: Dave Jones <davej@redhat.com> Reported-and-Tested-by: Reuben Farrelly <reuben@reub.net> Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
* | | | | | | Merge tag 'hwmon-for-linus' of ↵Linus Torvalds2014-05-131-5/+5
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix resource leak as well as broken store function in emc1403 driver, and add support for additional chip revisions" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (emc1403) Support full range of known chip revision numbers hwmon: (emc1403) Fix resource leak on module unload hwmon: (emc1403) fix inverted store_hyst()
| * | | | | | | hwmon: (emc1403) Support full range of known chip revision numbersJosef Gajdusek2014-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The datasheet for EMC1413/EMC1414, which is fully compatible to EMC1403/1404 and uses the same chip identification, references revision numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers from 0x01 to 0x04 to make sure none are missed. Signed-off-by: Josef Gajdusek <atx@atx.name> Cc: stable@vger.kernel.org [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * | | | | | | hwmon: (emc1403) Fix resource leak on module unloadJean Delvare2014-05-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 454aee17f claims to convert driver emc1403 to use devm_hwmon_device_register_with_groups, however the patch itself makes use of hwmon_device_register_with_groups instead. As the driver remove function was still dropped, the hwmon device is no longer unregistered on driver removal, leading to a resource leak. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 454aee17f hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groups Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org [3.13+] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * | | | | | | hwmon: (emc1403) fix inverted store_hyst()Josef Gajdusek2014-05-121-1/+1
| | |_|/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attempts to set the hysteresis value to a temperature below the target limit fails with "write error: Numerical result out of range" due to an inverted comparison. Signed-off-by: Josef Gajdusek <atx@atx.name> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | | | | Merge branch 'for-3.15-fixes' of ↵Linus Torvalds2014-05-131-1/+1
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull a percpu fix from Tejun Heo: "Fix for a percpu allocator bug where it could try to kfree() a memory region allocated using vmalloc(). The bug has been there for years now and is unlikely to have ever triggered given the size of struct pcpu_chunk. It's still theoretically possible and the fix is simple and safe enough, so the patch is marked with -stable" * 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: make pcpu_alloc_chunk() use pcpu_mem_free() instead of kfree()
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-10 17:50:42 +0200