summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* W1: ds2490: Increase timeout when waiting for statusAlexander Stein2014-11-071-1/+1
| | | | | | | | | | | | | | | | | Adjust the bulk message timeout to the other ones (1000ms). Otherwise the following dmesg errors can be seen on a Raspberry Pi: [ 31.492386] Failed to read 1-wire data from 0x81: err=-110. [ 31.504168] 0x81: count=-110, status: [ 31.613404] Failed to read 1-wire data from 0x81: err=-110. [ 31.621915] 0x81: count=-110, status: [ 43.260968] Failed to read 1-wire data from 0x81: err=-110. [ 43.270998] 0x81: count=-110, status: [ 43.379959] Failed to read 1-wire data from 0x81: err=-110. [ 43.388854] 0x81: count=-110, status: Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver core: Fix unbalanced device reference in drivers_probeAlex Williamson2014-11-071-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bus_find_device_by_name() acquires a device reference which is never released. This results in an object leak, which on older kernels results in failure to release all resources of PCI devices. libvirt uses drivers_probe to re-attach devices to the host after assignment and is therefore a common trigger for this leak. Example: # cd /sys/bus/pci/ # dmesg -C # echo 1 > devices/0000\:01\:00.0/sriov_numvfs # echo 0 > devices/0000\:01\:00.0/sriov_numvfs # dmesg | grep 01:10 pci 0000:01:10.0: [8086:10ca] type 00 class 0x020000 kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_add_internal: parent: '0000:00:01.0', set: 'devices' kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0' kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0' kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0' kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_cleanup, parent (null) kobject: '0000:01:10.0' (ffff8801d79cd0a8): calling ktype release kobject: '0000:01:10.0': free name [kobject freed as expected] # dmesg -C # echo 1 > devices/0000\:01\:00.0/sriov_numvfs # echo 0000:01:10.0 > drivers_probe # echo 0 > devices/0000\:01\:00.0/sriov_numvfs # dmesg | grep 01:10 pci 0000:01:10.0: [8086:10ca] type 00 class 0x020000 kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_add_internal: parent: '0000:00:01.0', set: 'devices' kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0' kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0' kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0' [no free] Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* pch_phub: Build context save/restore only for PMThierry Reding2014-11-071-0/+2
| | | | | | | | | The pch_phub_save_reg_conf() and pch_phub_restore_reg_conf() functions are only used for suspend/resume support (i.e. when PM is enabled). If PM is disabled they don't need to be built. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* misc: genwqe: check for error from get_user_pages_fast()Ian Abbott2014-11-071-0/+2
| | | | | | | | | | | | | | | `genwqe_user_vmap()` calls `get_user_pages_fast()` and if the return value is less than the number of pages requested, it frees the pages and returns an error (`-EFAULT`). However, it fails to consider a negative error return value from `get_user_pages_fast()`. In that case, the test `if (rc < m->nr_pages)` will be false (due to promotion of `rc` to a large `unsigned int`) and the code will continue on to call `genwqe_map_pages()` with an invalid list of page pointers. Fix it by bailing out if `get_user_pages_fast()` returns a negative error value. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org> # 3.14.x # 3.15.x # 3.16.x # 3.17.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* char: misc: document behaviour of open()Martin Kepplinger2014-11-071-1/+3
| | | | | | | | | an open syscall now assignes file->private_data to a pointer to the miscdevice structure. This reminds driver developers not to duplicate code if they need this. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fbdev: pxa3xx-gcu: remove redundant implementation of open()Martin Kepplinger2014-11-071-10/+0Star
| | | | | | | the miscdevice core now does the work in any case. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* misc: always assign miscdevice to file->private_data in open()Martin Kepplinger2014-11-071-1/+1
| | | | | | | | | | | | | | | | | | | As of now, a miscdevice driver has to provide an implementation of the open() file operation if it wants to have misc_open() assign a pointer to struct miscdevice to file->private_data for other file operations to use (given the user calls open()). This leads to situations where a miscdevice driver that doesn't need internal operations during open() has to implement open() that only returns immediately, in order to use the data in private_data in other fops. This provides consistent behaviour for miscdevice developers and will always provide the pointer in private_data. A driver's open() fop would, of course, just overwrite it, when using private_data itself. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: vmbus: Fix a race condition when unregistering a deviceVitaly Kuznetsov2014-11-071-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | When build with Debug the following crash is sometimes observed: Call Trace: [<ffffffff812b9600>] string+0x40/0x100 [<ffffffff812bb038>] vsnprintf+0x218/0x5e0 [<ffffffff810baf7d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff812bb4c1>] vscnprintf+0x11/0x30 [<ffffffff8107a2f0>] vprintk+0xd0/0x5c0 [<ffffffffa0051ea0>] ? vmbus_process_rescind_offer+0x0/0x110 [hv_vmbus] [<ffffffff8155c71c>] printk+0x41/0x45 [<ffffffffa004ebac>] vmbus_device_unregister+0x2c/0x40 [hv_vmbus] [<ffffffffa0051ecb>] vmbus_process_rescind_offer+0x2b/0x110 [hv_vmbus] ... This happens due to the following race: between 'if (channel->device_obj)' check in vmbus_process_rescind_offer() and pr_debug() in vmbus_device_unregister() the device can disappear. Fix the issue by taking an additional reference to the device before proceeding to vmbus_device_unregister(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: hv: util: make struct hv_do_fcopy match Hyper-V host messagesVitaly Kuznetsov2014-11-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | An attempt to fix fcopy on i586 (bc5a5b0 Drivers: hv: util: Properly pack the data for file copy functionality) led to a regression on x86_64 (and actually didn't fix i586 breakage). Fcopy messages from Hyper-V host come in the following format: struct do_fcopy_hdr | 36 bytes 0000 | 4 bytes offset | 8 bytes size | 4 bytes data | 6144 bytes On x86_64 struct hv_do_fcopy matched this format without ' __attribute__((packed))' and on i586 adding ' __attribute__((packed))' to it doesn't change anything. Keep the structure packed and add padding to match re reality. Tested both i586 and x86_64 on Hyper-V Server 2012 R2. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tools: hv: introduce -n/--no-daemon optionVitaly Kuznetsov2014-11-073-6/+94
| | | | | | | | | | | | | | | | All tools/hv daemons do mandatory daemon() on startup. However, no pidfile is created, this make it difficult for an init system to track such daemons. Modern linux distros use systemd as their init system. It can handle the daemonizing by itself, however, it requires a daemon to stay in foreground for that. Some distros already carry distro-specific patch for hv tools which switches off daemon(). Introduce -n/--no-daemon option for all 3 daemons in hv/tools. Parse options with getopt() to make this part easily expandable. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Tools: hv: vssdaemon: ignore the EBUSY on multiple freezing the same partitionDexuan Cui2014-11-071-8/+40
| | | | | | | | | | | | | If a partition appears mounted more than once in /proc/mounts, vss_do_freeze() succeeds only for the first time and gets EBUSY (on freeze) or EINVAL (on thaw) for the second time. The patch ignores these to make the backup feature work. Also improved the error handling in case a freeze operation fails. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uio: support memory sizes larger than 32 bitsCristian Stoica2014-11-073-4/+4
| | | | | | | | | This is a completion to 27a90700a4275c5178b883b65927affdafa5185c The size field is also increased to allow values larger than 32 bits on platforms that have more than 32 bit physical addresses. Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* devres: support sizes greater than an unsigned longCristian Stoica2014-11-072-4/+4
| | | | | | | | | As in 4f452e8aa492c0b8028ca9b4bdb4d018ba28c6c7, use resource_size_t to accomodate sizes greater than the size of an unsigned long int on platforms that have more than 32 bit physical addresses. Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: fix hbm MEI_HBM_STARTED ambiguityTomas Winkler2014-11-072-4/+2Star
| | | | | | | | | | | | We have MEI_HBM_STARTED in two contexts one after start message was received and second after enumeration was completed. Because after start message reception we move immediately to the enumeration state, we need only the later meaning. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: nfc: clean nfc internal struct on host exitTomas Winkler2014-11-073-11/+46
| | | | | | | | | | | | | | | | | | | | NFC internal structure cleaning was dropped by commit commit 487056932d372cc4f6c636f21a928d6667b151d7 Author: Tomas Winkler <tomas.winkler@intel.com> Date: Mon Feb 17 15:13:19 2014 +0200 mei: Remove all bus devices from the mei_dev list when stopping the MEI When stopping the MEI, we should remove and potentially unregister all bus devices queued on the mei_dev linked list. We allocate nfc_dev and free it across the reset so we do not keep it in dirty state Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i8k: Add MODULE_DEVICE_TABLE macroPali Rohár2014-11-071-0/+2
| | | | | | | | | This patch adds MODULE_DEVICE_TABLE macro so i8k.ko module can be automatically loaded based on dmi system alias. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i8k: Add support for Dell Latitude E6440Pali Rohár2014-11-071-0/+8
| | | | | | | | | Dell Latitude E6440 needs same settings as E6540. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* checkkconfigsymbols.sh: reimplementation in pythonValentin Rothberg2014-11-072-59/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The scripts/checkkconfigsymbols.sh script searches Kconfig features in the source code that are not defined in Kconfig. Such identifiers always evaluate to false and are the source of various kinds of bugs. However, the shell script is slow and it does not detect such broken references in Kbuild and Kconfig files (e.g., ``depends on UNDEFINED´´). Furthermore, it generates false positives. The script is also hard to read and understand, and is thereby difficult to maintain. This patch replaces the shell script with an implementation in Python, which: (a) detects the same bugs, but does not report previous false positives (b) additionally detects broken references in Kconfig and all non-Kconfig files, such as Kbuild, .[cSh], .txt, .sh, defconfig, etc. (c) is up to 75 times faster than the shell script (d) only checks files under version control The new script reduces the runtime on my machine (i7-2620M, 8GB RAM, SSD) from 3m47s to 0m3s, and reports 938 broken references in Linux v3.17-rc1; 419 additional reports of which 16 are located in Kconfig files, 287 in defconfigs, 63 in ./Documentation, 1 in Kbuild. Moreover, we intentionally include references in comments, which have been ignored until now. Such comments may be leftovers of features that have been removed or renamed in Kconfig (e.g., ``#endif /* CONFIG_MPC52xx */´´). These references can be misleading and should be removed or replaced. Note that the output format changed from (file list <tab> feature) to (feature <tab> file list) as it simplifies the detection of the Kconfig feature for long file lists. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* misc: atmel-ssc: prepare clock only when requestBo Shen2014-11-071-2/+2
| | | | | | | | | Prepare SSC clock only when request SSC channel, the clock will be enabled when initialize the SSC. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: hbm: use client specific print functionsAlexander Usyskin2014-11-041-8/+8
| | | | | | | | | We have host client in connect/disconnect response processors, so use client print functions to simplify and unify code. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: debugfs: display also connectionless clientsTomas Winkler2014-11-041-6/+2Star
| | | | | | | | | | | <debugfs>meiX/meclients: display also fixed/connectionless clients Use better name for fixed client field: fixed_address is boolean and indicates whether a client is fixed or dynamic. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: use local cl variables in wd and amthifTomas Winkler2014-11-042-7/+12
| | | | | | | | | Use local cl variable instead of dev->iamthif_cl and dev->wd_cl as the first step to use dynamic allocation of these clients as their are not supported on all platforms Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: drop unneeded client NULL check in cb structureAlexander Usyskin2014-11-044-32/+11Star
| | | | | | | | | | | The pointer to client in the callback structure (cb->cl) can't be NULL with current locking. We can drop check and warnings as in some cases this just uselessly complicates the code flow. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Linux 3.18-rc3Linus Torvalds2014-11-031-2/+2
|
* Merge tag 'for-linus-20141102' of git://git.infradead.org/linux-mtdLinus Torvalds2014-11-026-39/+73
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD fixes from Brian Norris: "Three main MTD fixes for 3.18: - A regression from 3.16 which was noticed in 3.17. With the restructuring of the m25p80.c driver and the SPI NOR library framework, we omitted proper listing of the SPI device IDs. This means m25p80.c wouldn't auto-load (modprobe) properly when built as a module. For now, we duplicate the device IDs into both modules. - The OMAP / ELM modules were depending on an implicit link ordering. Use deferred probing so that the new link order (in 3.18-rc) can still allow for successful probing. - Fix suspend/resume support for LH28F640BF NOR flash" * tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd: mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips mtd: omap: fix mtd devices not showing up mtd: m25p80,spi-nor: Fix module aliases for m25p80 mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id mtd: m25p80: get rid of spi_get_device_id
| * mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chipsDmitry Eremin-Solenikov2014-10-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After '#echo mem > /sys/power/state' some devices can not be properly resumed because apparently the MTD Partition Configuration Register has been reset to default thus the rootfs cannot be mounted cleanly on resume. An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3 where the second step of the Sleep Shutdown Sequence is described: "An internal reset is applied to the SA-1100. All units are reset...". As workaround we refresh the PCR value as done initially on chip setup. This behavior and the fix are confirmed by our tests done on 2 different Zaurus collie units with kernel 3.17. Fixes: 812c5fa82bae: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR") Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: omap: fix mtd devices not showing upFrans Klaver2014-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 6d178ef2fd5e ("mtd: nand: Move ELM driver and rename as omap_elm"), I don't have any mtd devices present on my am335x. This changes the link order of the omap_elm and omap2 objects, causing them to probe in the wrong order. To fix this, make elm_config defer probing until the omap_elm driver is actually loaded. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: m25p80,spi-nor: Fix module aliases for m25p80Ben Hutchings2014-10-213-4/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | m25p80's device ID table is now spi_nor_ids, defined in spi-nor. The MODULE_DEVICE_TABLE() macro doesn't work with extern definitions, but its use was also removed at the same time. Now if m25p80 is built as a module it doesn't get the necessary aliases to be loaded automatically. A clean solution to this will involve defining the list of device IDs in spi-nor.h and removing struct spi_device_id from the spi-nor API, but this is quite a large change. As a quick fix suitable for stable, copy the device IDs back into m25p80. Fixes: 03e296f613af ("mtd: m25p80: use the SPI nor framework") Cc: <stable@vger.kernel.org> # 3.16.x: 32f1b7c8352f: mtd: move support for struct flash_platform_data into m25p80 Cc: <stable@vger.kernel.org> # 3.16.x: 90e55b3812a1: mtd: m25p80: get rid of spi_get_device_id Cc: <stable@vger.kernel.org> # 3.16.x: 70f3ce0510af: mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id Cc: <stable@vger.kernel.org> # 3.16.x Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_idBen Hutchings2014-10-174-30/+14Star
| | | | | | | | | | | | | | | | | | | | Drivers currently call spi_nor_match_id() and then spi_nor_scan(). This adds a dependency on struct spi_device_id which we want to avoid. Make spi_nor_scan() do it for them. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: m25p80: get rid of spi_get_device_idRafał Miłecki2014-10-171-5/+5
| | | | | | | | | | | | | | | | This simplifies the way we use spi_nor framework and will allow us to drop spi_nor_match_id. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | Merge tag 'scsi-for-linus' of ↵Linus Torvalds2014-11-026-19/+53
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of six patches consisting of: - two MAINTAINER updates - two scsi-mq fixs for the old parallel interface (not every request is tagged and we need to set the right flags to populate the SPI tag message) - a fix for a memory leak in scatterlist traversal caused by a preallocation update in 3.17 - an ipv6 fix for cxgbi" [ The scatterlist fix also came in separately through the block layer tree ] * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ufs - remove self MAINTAINERS: change hpsa and cciss maintainer libcxgbi : support ipv6 address host_param scsi: set REQ_QUEUE for the blk-mq case Revert "block: all blk-mq requests are tagged" lib/scatterlist: fix memory leak with scsi-mq
| * | MAINTAINERS: ufs - remove selfSantosh Y2014-10-281-1/+0Star
| | | | | | | | | | | | | | | | | | | | | I have moved, I do not have the hardware access anymore. Signed-off-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | MAINTAINERS: change hpsa and cciss maintainerDon Brace2014-10-281-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change ownership of the hpsa driver from Stephen M. Cameron (Hewlett-Packard) to Don Brace (PMC-Sierra). Change ownership of the cciss driver from Mike Miller (Hewlett-Packard) to Don Brace (PMC-Sierra). Signed-off-by: Don Brace <don.brace@pmcs.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | libcxgbi : support ipv6 address host_paramAnish Bhatt2014-10-282-10/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libcxgbi was always returning an ipv4 address for ISCSI_HOST_PARAM_IPADDRESS, return appropriate address based on address family Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | scsi: set REQ_QUEUE for the blk-mq caseChristoph Hellwig2014-10-282-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To generate the right SPI tag messages we need to properly set QUEUE_FLAG_QUEUED in the request_queue and mirror it to the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Jens Axboe <axboe@kernel.dk> Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Cc: stable@vger.kernel.org
| * | Revert "block: all blk-mq requests are tagged"Christoph Hellwig2014-10-281-2/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit fb3ccb5da71273e7f0d50b50bc879e50cedd60e7. SCSI-2/SPI actually needs the tagged/untagged flag in the request to work properly. Revert this patch and add a follow on to set it in the right place. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Jens Axboe <axboe@kernel.dk> Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Cc: stable@vger.kernel.org
| * | lib/scatterlist: fix memory leak with scsi-mqTony Battersby2014-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a memory leak with scsi-mq triggered by commands with large data transfer length. Fixes: c53c6d6a68b1 ("scatterlist: allow chaining to preallocated chunks") Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* | | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2014-11-0222-83/+116
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "Nothing too astounding or major: radeon, i915, vmwgfx, armada and exynos. Biggest ones: - vmwgfx has one big locking regression fix - i915 has come displayport fixes - radeon has some stability and a memory alloc failure - armada and exynos have some vblank fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits) drm/exynos: correct connector->dpms field before resuming drm/exynos: enable vblank after DPMS on drm/exynos: init kms poll at the end of initialization drm/exynos: propagate plane initialization errors drm/exynos: vidi: fix build warning drm/exynos: remove explicit encoder/connector de-initialization drm/exynos: init vblank with real number of crtcs drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size. drm/vmwgfx: Fix hash key computation drm/vmwgfx: fix lock breakage drm/i915/dp: only use training pattern 3 on platforms that support it drm/radeon: remove some buggy dead code drm/i915: Ignore VBT backlight check on Macbook 2, 1 drm/radeon: remove invalid pci id drm/radeon: dpm fixes for asrock systems radeon: clean up coding style differences in radeon_get_bios() drm/radeon: Use drm_malloc_ab instead of kmalloc_array drm/radeon/dpm: disable ulv support on SI drm/i915: Fix GMBUSFREQ on vlv/chv drm/i915: Ignore long hpds on eDP ports ...
| * \ \ Merge branch 'exynos-drm-fixes' of ↵Dave Airlie2014-11-027-42/+29Star
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes This pull-request includes some bug fixes and code cleanups. Especially, this fixes the bind failure issue occurred when it tries to re-bind Exynos drm driver after unbound, and the modetest failure issue incurred by not having a pair to vblank on and off requests. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: correct connector->dpms field before resuming drm/exynos: enable vblank after DPMS on drm/exynos: init kms poll at the end of initialization drm/exynos: propagate plane initialization errors drm/exynos: vidi: fix build warning drm/exynos: remove explicit encoder/connector de-initialization drm/exynos: init vblank with real number of crtcs
| | * | | drm/exynos: correct connector->dpms field before resumingAndrzej Hajda2014-11-021-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During system suspend after connector switch off its dpms field is set to connector previous dpms state. To properly resume dpms field should be set to its actual state (off) before resuming to previous dpms state. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| | * | | drm/exynos: enable vblank after DPMS onAndrzej Hajda2014-11-021-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before DPMS off driver disables vblank. It should be balanced by vblank enable after DPMS on. The patch fixes issue with page_flip ioctl not being able to acquire vblank counter introduced by patch: drm: Always reject drm_vblank_get() after drm_vblank_off() Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| | * | | drm/exynos: init kms poll at the end of initializationAndrzej Hajda2014-11-021-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HPD events can be generated by components even if drm_dev is not fully initialized, to skip such events kms poll initialization should be performed at the end of load callback followed directly by forced connection detection. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| | * | | drm/exynos: propagate plane initialization errorsAndrzej Hajda2014-11-021-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error during plane initialization load callback incorrectly return success, this patch fixes it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| | * | | drm/exynos: vidi: fix build warningInki Dae2014-11-021-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | encoder object isn't used anymore so remove it. Signed-off-by: Inki Dae <inki.dae@samsung.com>
| | * | | drm/exynos: remove explicit encoder/connector de-initializationAndrzej Hajda2014-11-025-22/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All KMS objects are destroyed by drm_mode_config_cleanup in proper order so component drivers should not care about it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| | * | | drm/exynos: init vblank with real number of crtcsAndrzej Hajda2014-11-021-9/+9
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialization of vblank with MAX_CRTC caused attempts to disabling vblanks for non-existing crtcs in case drm used fewer crtcs. The patch fixes it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| * | | Merge branch 'vmwgfx-fixes-3.18' of git://people.freedesktop.org/~thomash/linuxDave Airlie2014-11-023-9/+24
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A critical 3.18 regression fix from Rob, (thanks!) A fix to avoid advertizing modes we can't support from Sinclair (welcome Sinclair!) and a fix for an incorrect hash key computation from me that is completely harmless, but can wait 'til the next merge window if necessary. (I can't really bother stable with this one). * 'vmwgfx-fixes-3.18' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size. drm/vmwgfx: Fix hash key computation drm/vmwgfx: fix lock breakage
| | * | | drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size.Sinclair Yeh2014-10-312-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When screen objects are enabled, the bpp is assumed to be 32, otherwise it is set to 16. v2: * Use u32 instead of u64 for assumed_bpp. * Fixed mechanism to check for screen objects * Limit the back buffer size to VRAM. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: <stable@vger.kernel.org>
| | * | | drm/vmwgfx: Fix hash key computationThomas Hellstrom2014-10-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hash key computation in vmw_cmdbuf_res_remove incorrectly didn't take the resource type into account, contrary to all the other related functions. This becomes important when the cmdbuf resource manager handles more than one resource type. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
| | * | | drm/vmwgfx: fix lock breakageRob Clark2014-10-311-4/+4
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After: commit d059f652e73c35678d28d4cd09ab2cec89696af9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> AuthorDate: Fri Jul 25 18:07:40 2014 +0200 drm: Handle legacy per-crtc locking with full acquire ctx drm_mode_cursor_common() was switched to use drm_modeset_(un)lock_crtc() which uses full aquire ctx. So dropping/reaquiring the lock via drm_modeset_(un)lock() directly isn't the right thing to do, as lockdep kindly points out. The 'FIXME's about sorting out whether vmwgfx *really* needs to lock-all for cursor updates still apply. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-01-30 18:49:08 +0100