summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6q.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: imx: ocram size is different between imx6q and imx6dlShawn Guo2013-08-221-0/+6
| | | | | | | | | The ocram on imx6q is 256 KiB while on imx6dl it's 128 KiB. Let's have separate node for imx6q and imx6dl. It also changes imx6q size 0x3f000 to 0x40000 to match the hardware. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Liu Ying <Ying.Liu@freescale.com>
* ARM: dtsi: enable ahci sata on imx6q platformsRichard Zhu2013-08-221-0/+9
| | | | | | | | Only imx6q has the ahci sata controller, enable it on imx6q platforms. Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: add more imx6q/dl pin groupsShawn Guo2013-08-221-0/+36
| | | | | | | | | | Add more imx6q/dl pin groups for those supported boards, e.g. sabresd, sabreauto, arm2. IPU2 pin groups are added into imx6q.dtsi, since the block is only available on imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: share pad macro names between imx6q and imx6dlShawn Guo2013-08-221-365/+1Star
| | | | | | | | | | | | | | | | | | | | | The imx6q and imx6dl are two pin-to-pin compatible SoCs. The same board design can work with either chip plugged into the socket, e.g. sabresd and sabreauto boards. We currently define pin groups in imx6q.dtsi and imx6dl.dtsi respectively because the pad macro names are different between two chips. This brings a maintenance burden on having the same label point to the same pin group defined in two places. The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs pad macro names. Then the pin groups becomes completely common between imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the long term maintenance of imx6q/dt pin settings becomes easier. Unfortunately, the change brings some dramatic diff stat, but it's all about DTS file, and the ultimate net diff stat is good. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q{dl}: add a DTE uart pinctrl for uart2Huang Shijie2013-08-221-0/+9
| | | | | | | | In the arm2 board, the UART2 works in the dte mode. So add a pinctrl for both the imx6q{dl} boards. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX6: sync imx6q and imx6dl pinmux entriesSascha Hauer2013-08-221-2/+1Star
| | | | | | | | | | | The i.MX6Q and i.MX6DL are pin compatible, so the pinmux entries should be in sync. This patch systematically adds the pinmux entries missing from the imx6q to the imx6dl file. Some name inconsistencies and whitespace damage is fixed along the way. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q: add a new pinctrl for ecspi1Huang Shijie2013-08-221-0/+8
| | | | | | This new pinctrl is used by the imx6q-sabresd board. Signed-off-by: Huang Shijie <b32955@freescale.com>
* Merge tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann2013-06-201-2/+98
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/dt From Shawn Guo: imx device tree changes for 3.11: * A bunch of new board additions, imx6sl-evk, vf610-twr, imx53-tx53, imx53-m53evk and imx27-phytec-phycore * Various pinctrl setting updates and additions * Enable various on board peripherals, usb, audio, nor, display etc. * Configure L2 cache data and tag latency from device tree * Add imx-weim bus driver * tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (82 commits) ARM: dts: imx27: Add VPU devicetree node ARM: mxc: fix gpio-ranges for VF610 ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio support ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUX ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC support ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962 ARM: dtsi: imx6dl: Add a pinctrl for AUDMUX ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1 ARM: dts: imx6qdl-sabresd: add clko1 iomux configuration ARM: dts: Phytec imx6q pfla02 and pbab01 support ARM: dts: imx6q: Add pinctrl for usdhc2 and enet ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flash ARM: dts: imx27-phytec-phycore-rdk: Add SDHC support ARM: dts: i.MX27: Add SDHC devicetree nodes ARM: dts: i.MX27: Add DMA devicetree node ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR ARM: dts: imx6dl: add pinctrls for WEIM NOR ARM: dts: imx6q: add pinctrls for WEIM NOR ARM: dts: imx6qdl: add more information for WEIM ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1Nicolin Chen2013-06-171-0/+7
| | | | | | | | | | | | | | Add a pinctrl for I2C1 used on imx6q/dl-sabresd. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: dts: imx6q: Add pinctrl for usdhc2 and enetChristian Hemp2013-06-171-0/+32
| | | | | | | | | | | | | | Add a group to the usdhc2 and enet pinctrl. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: dts: imx6q: add pinctrls for WEIM NORHuang Shijie2013-06-171-0/+59
| | | | | | | | | | | | | | | | Add two pinctrls for WEIM: one for the weim nor, another for the chipselect. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: dts: imx6q: remove the unused pins for gpmi-nandHuang Shijie2013-06-171-2/+0Star
| | | | | | | | | | | | | | | | | | | | The gpmi does not use the MX6Q_PAD_NANDF_CS2__NAND_CE2_B and MX6Q_PAD_NANDF_CS3__NAND_CE3_B. Just remove them. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: dts: imx: cpus/cpu nodes dts updatesLorenzo Pieralisi2013-05-231-0/+4
|/ | | | | | | | This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
* ARM i.MX6q: Link system reset controller (SRC) to IPU in DTPhilipp Zabel2013-04-091-0/+1
| | | | | | | | Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM i.MX6q: Add LDB device to device treeSteffen Trumtrar2013-04-091-0/+17
| | | | | | | | Add ldb device tree node and clock lookups. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q: Add pinctrl for audmix on AUD3Sean Cross2013-04-091-0/+9
| | | | | | | Allow AUD3 to be used as audio output from the audmux block. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q: Add pinctrl for i2c2 and i2c3Sean Cross2013-04-091-0/+18
| | | | | | | Add groups to allow i2c2 and i2c3 to be used on imx6q. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q: Add pinctrl for ecspi3Sean Cross2013-04-091-0/+10
| | | | | | | Add a group of pins to allow ecspi3 to be used on imx6q. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* pinctrl: imx: move hard-coding data into device treeShawn Guo2013-04-091-110/+111
| | | | | | | | | | | | | | | | | | | | | | | | Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: imx: use #include for all device treesShawn Guo2013-04-091-1/+1
| | | | | | | | | | | | Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q-sabresd: Add USB supportPeter Chen2013-04-091-0/+6
| | | | | | | Add USB support for imx6q sabresd board Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: add dtsi for imx6q and imx6dlShawn Guo2013-02-101-0/+296
| | | | | | | | | | | | | | Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: rename imx6q.dtsi to imx6qdl.dtsiShawn Guo2013-02-101-1077/+0Star
| | | | | | | | | | | | i.MX6 Quad and i.MX6 DualLite is similar enough to share one dtsi file, so rename imx6q.dtsi to imx6qdl.dtsi preparing for the addition of imx6dl support. Another member of i.MX6 series i.MX6 SoloLite is different enough from the other two, so it will stand as a separate dtsi. That's why we rename to imx6qdl.dtsi not imx6.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX6: Add regulator delay supportAnson Huang2013-02-101-0/+9
| | | | | | | | | | | | | | | | | | | | | | For ANATOP LDOs, vddcpu, vddsoc and vddpu have step time settings in the misc2 register, need to add necessary step time info for these three LDOs, then regulator driver can add necessary delay based on these settings. offset 0x170: bit [24-25]: vddcpu bit [26-27]: vddpu bit [28-29]: vddsoc field definition: 0'b00: 64 cycles of 24M clock; 0'b01: 128 cycles of 24M clock; 0'b02: 256 cycles of 24M clock; 0'b03: 512 cycles of 24M clock; Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: enable imx6q-cpufreq supportShawn Guo2013-02-101-6/+14
| | | | | | | | | | Update operating-points per hardware document and add support for 1 GHz and 1.2 GHz frequencies. 400 MHz, 800 MHz and 1 GHz should be supported by all i.MX6Q chips, while 1.2 GHz support needs to know from OTP fuse bit. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q: Remove silicon version from SDMA firmwareFabio Estevam2013-02-101-1/+1
| | | | | | | | | Remove silicon version from SDMA firmware. This makes it consistent with other i.MX SoCs firmware names. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: use nodes label in board dtsShawn Guo2013-02-101-1/+1
| | | | | | | | | Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6: fix fec ptp clock slow 10 timeFrank Li2013-02-051-1/+1
| | | | | | | | | ptp should use enet_ref instead of pll6_enet pll6_enet is fixed 500Mhz. There are divider between enet_ref and pll6_enet Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-131-47/+67
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
| * ARM i.MX dts: Consistently add labels to devicenodesSascha Hauer2012-11-161-44/+44
| | | | | | | | | | | | | | | | | | | | | | Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: imx: enable cpufreq for imx6qShawn Guo2012-11-161-1/+9
| | | | | | | | | | | | It enables cpufreq support for imx6q with generic cpufreq-cpu0 driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: dts: imx6q: enable snvs lp rtcShawn Guo2012-11-161-2/+10
| | | | | | | | Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM i.MX dtsi: Add default bus-width property for esdhc controllerSascha Hauer2012-11-161-0/+4
| | | | | | | | | | | | | | | | | | | | According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2012-12-131-2/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking changes from David Miller: 1) Allow to dump, monitor, and change the bridge multicast database using netlink. From Cong Wang. 2) RFC 5961 TCP blind data injection attack mitigation, from Eric Dumazet. 3) Networking user namespace support from Eric W. Biederman. 4) tuntap/virtio-net multiqueue support by Jason Wang. 5) Support for checksum offload of encapsulated packets (basically, tunneled traffic can still be checksummed by HW). From Joseph Gasparakis. 6) Allow BPF filter access to VLAN tags, from Eric Dumazet and Daniel Borkmann. 7) Bridge port parameters over netlink and BPDU blocking support from Stephen Hemminger. 8) Improve data access patterns during inet socket demux by rearranging socket layout, from Eric Dumazet. 9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and Jon Maloy. 10) Update TCP socket hash sizing to be more in line with current day realities. The existing heurstics were choosen a decade ago. From Eric Dumazet. 11) Fix races, queue bloat, and excessive wakeups in ATM and associated drivers, from Krzysztof Mazur and David Woodhouse. 12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions in VXLAN driver, from David Stevens. 13) Add "oops_only" mode to netconsole, from Amerigo Wang. 14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also allow DCB netlink to work on namespaces other than the initial namespace. From John Fastabend. 15) Support PTP in the Tigon3 driver, from Matt Carlson. 16) tun/vhost zero copy fixes and improvements, plus turn it on by default, from Michael S. Tsirkin. 17) Support per-association statistics in SCTP, from Michele Baldessari. And many, many, driver updates, cleanups, and improvements. Too numerous to mention individually. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) net/mlx4_en: Add support for destination MAC in steering rules net/mlx4_en: Use generic etherdevice.h functions. net: ethtool: Add destination MAC address to flow steering API bridge: add support of adding and deleting mdb entries bridge: notify mdb changes via netlink ndisc: Unexport ndisc_{build,send}_skb(). uapi: add missing netconf.h to export list pkt_sched: avoid requeues if possible solos-pci: fix double-free of TX skb in DMA mode bnx2: Fix accidental reversions. bna: Driver Version Updated to 3.1.2.1 bna: Firmware update bna: Add RX State bna: Rx Page Based Allocation bna: TX Intr Coalescing Fix bna: Tx and Rx Optimizations bna: Code Cleanup and Enhancements ath9k: check pdata variable before dereferencing it ath5k: RX timestamp is reported at end of frame ath9k_htc: RX timestamp is reported at end of frame ...
| * | ARM: dts: imx6q: Add ENET PTP clock pin and clock sourceFrank Li2012-11-011-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add ENET 1588 clock input pin MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT and anatop PLL8 clock source for ENET Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ARM i.MX6: Add pwm supportSascha Hauer2012-11-221-0/+16
| | | | | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
* | | ARM i.MX6: Add IPU supportSascha Hauer2012-11-161-0/+18
| |/ |/| | | | | | | | | | | This adds the IPU devices to the devicetree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
* | i2c: imx: remove cpu_is_xxx by using platform_device_idShawn Guo2012-10-151-3/+3
|/ | | | | | | | | | | | | | | | | | | This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
* Merge tag 'mfd-3.7-1' of ↵Linus Torvalds2012-10-051-2/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
| * regulator: anatop-regulator: Convert to use syscon to access anatop registerDong Aisheng2012-09-171-2/+2
| | | | | | | | | | | | | | | | | | Using syscon to access anatop register. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * ARM: imx6q: Add iomuxc gpr support into sysconDong Aisheng2012-09-171-0/+5
| | | | | | | | | | | | | | | | Include headfile for easy using. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | ARM: dts: imx6q-sabrelite: add usbotg pinctrl supportRichard Zhao2012-09-191-0/+8
| | | | | | | | | | Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: dts: imx6q-sabrelite: add usbmisc deviceRichard Zhao2012-09-171-0/+11
| | | | | | | | | | | | | | | | | | - add usbmisc device - set property fsl,usbmisc for usb controllers - set disable-over-current for imx6q-sabrelite usb otg Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | Merge tag 'imx-clk-dt-lookup' into imx/dt-for-3.7-2Shawn Guo2012-09-171-10/+63
|\ \ | | | | | | | | | | | | Conflicts: arch/arm/boot/dts/imx6q.dtsi
| * | ARM: imx6q: replace clk_register_clkdev with clock DT lookupShawn Guo2012-09-111-10/+63
| |/ | | | | | | | | | | | | | | | | | | | | | | | | It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: dts: imx6q-sabresd: add pinctrl settingsShawn Guo2012-09-111-0/+26
| | | | | | | | | | | | Add pinctrl settings for existing devices in imx6q-sabresd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: dts: imx6q-arm2: add pinctrl for uart and enetShawn Guo2012-09-111-0/+29
| | | | | | | | | | | | Add missing pinctrl of uart and enet for imx6q-arm2 board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enetShawn Guo2012-09-111-0/+44
| | | | | | | | | | | | Add missing pinctrl of usdhc and enet for imx6q-sabrelite board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: dts: imx6q: sort iomuxc sub-nodes in nameShawn Guo2012-09-111-10/+10
| | | | | | | | | | | | | | Sort iomuxc sub-nodes in name so that the node can be located a little bit easier. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: dts: imx6q: name iomuxc sub-nodes following pin functionShawn Guo2012-09-111-2/+2
| | | | | | | | | | | | Name iomuxc sub-nodes following pin function and hardware manual. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-06 19:02:34 +0200