summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/board-da850-evm.c
Commit message (Collapse)AuthorAgeFilesLines
* davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied highSekhar Nori2010-07-281-0/+8
| | | | | | | | | | | | | Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD voltage. Pass the right platform data to the TPS6507x driver so it can operate on the DEFDCDC{2,3}_HIGH register to read and change voltage levels. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* davinci: da850 TPS6507x touch screen driver board dataTodd Fischer2010-05-281-0/+12
| | | | | | | | | | | The touch screen controller in the TPS6507x chip needs values that are dependent on the characteristics of the touch screen hardware being used in the board design. In addition, the board provides version information that is exposed via the kernel input sub-system. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add tps6507x board data structureTodd Fischer2010-05-281-1/+6
| | | | | | | | | | | | Add mfd structure which refrences sub-driver initialization data. For example, for a giving hardware implementation, the voltage regulator sub-driver initialization data provides the mapping betten a voltage regulator and what the output voltage is being used for. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Davinci: aintc/cpintc - use ioremap()Cyril Chemparathy2010-05-131-9/+1Star
| | | | | | | | | | | | | | | | | | This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: promote da8xx_pinmux_setup()Cyril Chemparathy2010-05-071-9/+9
| | | | | | | | Rename da8xx_pinmux_setup() to davinci_cfg_reg_list() and promote it for use in other SOCs that may need the ability to configure multiple pins in one shot. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: cpintc host map configurationCyril Chemparathy2010-05-071-1/+1
| | | | | | | | | | | | | | | Host map configuration instructs the interrupt controller to route interrupt channels to FIQ or IRQ lines. Currently, DA8xx family of devices leave these registers at their reset-default values. TNETV107X however does not have sane reset defaults, and therefore this architecture needs to reconfigure the host-map such that channels 0 and 1 go to FIQ, and the remaining channels raise IRQs. This patch adds an optional host map argument to cp_intc_init() for this. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da850/omap-l138 EVM: register for suspend supportSekhar Nori2010-02-041-0/+17
| | | | | Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da850/omap-l138: Enable 4-bit eccSudhakar Rajashekhara2010-02-041-0/+1
| | | | | | | | This patch initializes the platform data to enable 4-bit ecc support on DA850/OMAP-L138. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da850/omap-l138: Modify NOR partition infoSudhakar Rajashekhara2010-02-041-1/+13
| | | | | | | | | | | | | On DA850/OMAP-L138, NOR flash partition was starting from offset ZERO erasing the UBL and u-boot when the complete NOR is erased. This patch moves the start of the partition to 512K, after the bootloaders and u-boot env variables. This patch also creates a new partition on NOR Flash to store Linux kernel image. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: da8xx/omapl1: add support for the second sysconfig moduleSekhar Nori2010-02-041-1/+1
| | | | | | | | | | | | | OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* da850/omap-l138: add callback to control LCD panel powerChaithrika U S2009-12-161-10/+14
| | | | | | | | | | | Add the platform specific callback to control LCD panel and backlight power. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* DA8xx/OMAP-L1xx: Add high speed SD/MMC capabilitiesChaithrika U S2009-11-251-0/+2
| | | | | | | | Include high speed capabilities in MMC/SD platform data for DA830/OMAP-L137 and DA850/OMAP-L138 EVMs. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA850/OMAP-L138 EVM: register for cpuidle supportSekhar Nori2009-11-251-0/+5
| | | | | Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA8XX/OMAP-L1XX: fix compiler warningSudhakar Rajashekhara2009-11-251-1/+1
| | | | | | | | | | | | | | | | | | | When kernel is built with CONFIG_DEBUG_SECTION_MISMATCH=y option, using da8xx_omapl_defconfig, some warnings are observed: WARNING: vmlinux.o(.text+0xc2a4): Section mismatch in reference from the function da850_evm_setup_nor_nand() to the variable .init.data:da850_nand_pins The function da850_evm_setup_nor_nand() references the variable __initdata da850_nand_pins. This is often because da850_evm_setup_nor_nand lacks a __initdata annotation or the annotation of da850_nand_pins is wrong. This patch fixes such warnings. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA850/OMAP-L138: eliminate static function declarationSudhakar Rajashekhara2009-11-251-52/+51Star
| | | | | | | | Eliminate the static function declaration by rearranging data in da850/omap-l138 board file. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA850/OMAP-L138 EVM: simplify configuration of emac in MII/RMII modeSekhar Nori2009-11-251-20/+15Star
| | | | | | | | | | There are multiple steps in configuring the EMAC to MII or RMII mode. Current code implements them using multiple checks. Consolidate the multiple checks into a single if construct. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHYSekhar Nori2009-11-251-22/+28
| | | | | | | | | | | | | | | | | | | | | Implement autodetection of RMII PHY by shifting the decision to use the RMII PHY to da850_evm_ui_expander_setup() from da850_evm_init() earlier. Without this patch, selecting RMII PHY in the UI expander menu will make the MII PHY unusable even though UI board is not connected. The actual configuration and registration of the EMAC device is delayed to device_initcall() so it happens after the UI card detection is complete. A side effect of this patch is the removal of a voilation of Documentation/SubmittingPatches section 2.2 in function da850_evm_init() Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: remove unneeded #include'sSergei Shtylyov2009-11-251-3/+0Star
| | | | | | | | | | There have accumulated quite a lot of them after the code reorganizations... In several cases I had to replace #include <linux/dma-mapping.h> which wasn't needed directly but happened to #include <linux/err.h> which was needed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: RMII support for DA850/OMAP-L138 EVMChaithrika U S2009-11-251-3/+65
| | | | | | | | | | | | | | | | DA850/OMAP-L138 EVM has a RMII Ethernet PHY on the UI daughter card. The PHY is enabled by proper programming of the IO Expander (TCA6416) ports. Also for RMII PHY to work, the MDIO clock of MII PHY has to be disabled since both the PHYs have the same address. This is done via the GPIO2[6] pin. This patch adds support for RMII PHY. This patch also adds a menuconfig option to select one or no peripheral connected to expander. Currently, sub-options in this menu are RMII and no peripheral.This menuconfig option is similar to the one present for UI card on DA830/OMAP-L137 EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA850/OMAP-L138 EVM expander setup and UI card detectionChaithrika U S2009-11-251-28/+99
| | | | | | | | | | | DA850/OMAP-L138 EVM can be connected to an UI card which has various peripherals on it.The UI card has TCA6416 expander which can be probed to check whether the UI card is connected or not. If the UI card is connected, setup NOR and NAND devices. This is done via the expander setup callback. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA850/OMAP-L138 EVM: add support for TPS65070 PMICSekhar Nori2009-11-251-0/+153
| | | | | | | | | | | | | | | This patch adds support for using the TPS65070 PMIC found on the DA850/OMAP-L138 EVM. It defines the power rail consumer mapping and registers the the I2C based PMIC as a board device. The power rail constraints are derived from the maxmimum and minimum recommended operating condition values of the respective consumers derived from section 5.2 of the OMAP-L138 datasheet. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA850/OMAP-L138 EVM: register for CPUFreq supportSekhar Nori2009-11-251-0/+5
| | | | | Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Correct the GPIO number for LCD panel powerSudhakar Rajashekhara2009-11-251-1/+13
| | | | | | | | | | | | | | | On the latest DA850/OMAP-L138 EVM (Beta) the GPIO pin number of LCD panel power has changed. This patch takes care of this change. Software will support only Beta versions of DA850/OMAP-L138 EVM. In the process, add the missing entry for data pin 0 and remove the GPIO specific pins from da850_lcdcntl_pins structure. EVM specific muxing for LCD is being done in the board file now. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add RTC support for DA8xx/OMAP-L13x SoC'sMark A. Greer2009-11-251-0/+4
| | | | | | | | Add RTC support for the da830/omap-l137 and da850/omap-l138 SoC's by leveraging existing the rtc-omap driver. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add support for Sharp LCD035Q3DG01 graphical LCDMark A. Greer2009-11-251-1/+1
| | | | | | | | | | Add support for the Sharp LCD035Q3DG01 graphical LCD. This requires a minor interface change to da8xx_register_lcdc() so that the board code can pass in the platform_data which describes the lcd controller that's to be used. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Change DA8xx/OMAP-L13x McASP registration routine nameMark A. Greer2009-11-251-1/+1
| | | | | | | | For consistency with existing code, change the name of da8xx_init_mcasp() to da8xx_register_mcasp(). Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: audio: move tlv320aic33 i2c setup into board filesChaithrika U S2009-08-261-0/+9
| | | | | | | Tested on DM6446, DM355, DM6447, DA850 EVMs. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Handle pinmux conflict between mmc/sd and nor flashSudhakar Rajashekhara2009-08-261-21/+42
| | | | | | | | | | | | | On DA850/OMAP-L138 EVM, MMC/SD and NOR Flash share some of the AEMIF pins. This patch prints out a warning during booting, if both MMC/SD and NOR Flash are enabled in kernel menuconfig. If both MMC/SD and NOR Flash are enabled, only MMC/SD will work correctly. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add NOR flash support for da850/omap-l138Sudhakar Rajashekhara2009-08-261-0/+59
| | | | | | | | | | This patch adds platform data for the 8MB NOR flash found on da850/omap-l138 EVM. Both NOR and NAND can co-exist on da850/omap-l138 as they are using different chip selects. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add NAND flash support for DA850/OMAP-L138Sudhakar Rajashekhara2009-08-261-0/+85
| | | | | | | | | This patch adds platform data for the 512MB NAND Flash found on DA850/OMAP-L138 EVM. Currently it supports only 1-bit ECC. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add MMC/SD support for da850/omap-l138Sudhakar Rajashekhara2009-08-261-0/+42
| | | | | | | | | | | | There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add platform support for da850/omap-l138 GLCDSudhakar Rajashekhara2009-08-261-0/+50
| | | | | | | | This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Audio support for DA850/OMAP-L138 EVMChaithrika U S2009-08-261-0/+29
| | | | | | | | Define resources for McASP used on DA850/OMAP-L138 EVM, add platform device defintion and Pin Mux configurations. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add EMAC support for da850/omap-l138Sudhakar Rajashekhara2009-08-261-0/+18
| | | | | | | | | | | | | | | Ethernet Media Access Controller (EMAC) on da850/omap-l138 supports 10/100 Mbps operation. It also supports Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) to physical layer (PHY). Phy which supports MII is present on the DA850/OMAP-L138 base board and Phy supporting RMII is present on the UI card. This patch adds support only for the MII Phy. Support for RMII Phy will be added later. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add support for DA850/OMAP-L138 EVM boardSudhakar Rajashekhara2009-08-261-0/+102
Add support for the DA850/OMAP-L138 Evaluation Module (EVM) from TI. The EVM has User Interface (UI) card which contains various devices. This UI card can be connected to the base board. Support for all the devices on the UI card and ones on the EVM will be added in subsequent patches. The EVM schematics are not available publicly yet; but should be available soon. A new defconfig for this board has been added mainly because the DA830/OMAP-L137 defconfig forces writethrough cache mode which is not required on DA850/OMAP-L138. This patch has been boot tested on DA850/OMAP-L138 EVM using ramdisk as filesystem. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-06-30 13:47:15 +0200