summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-ldp.c
Commit message (Collapse)AuthorAgeFilesLines
* omap: convert boards that use SMSC911x to use gpmc-smsc911xMike Rapoport2011-04-201-56/+9Star
| | | | | | | | | | Convert boards that use SMSC911x to use gpmc-smsc911x. Also allocate struct platform_device dynamically. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: folded in a fix from Igor Grindberg] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ldp: Fix regulator mapping for ads7846 TS controllerTony Lindgren2011-03-031-0/+21
| | | | | | | | | | | | On the OMAP3430LDP board, the ads7846 touchscreen controller is powered by VAUX1 regulator (supplying 3.0v). Fix this mapping in the board file, and hence prevent the ads7846 driver init to fail with the below error.. ads7846 spi1.0: unable to get regulator: -19 Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2+: Minimize board specific init_early callsTony Lindgren2011-02-251-2/+2
| | | | | | | We should only call init_common_infrastructure and init_common_devices from init_early. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3630: nand: fix device size to work in polled modeSukumar Ghorai2011-02-181-1/+1
| | | | | | | | | zoom3 and 3630-sdp having the x16 nand device. This patch configure gpmc as x16 and select the currect function in driver for polled mode (without prefetch enable) transfer. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2: use early init hookRussell King - ARM Linux2011-02-151-4/+4
| | | | | | | | Move non-mapping and non-irq initialization code out of .map_io and .init_irq respectively into the new init_early hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2+: io: split omap2_init_common_hw()Paul Walmsley2010-12-221-1/+2
| | | | | | | | | | | | | | | | | | | | | Split omap2_init_common_hw() into two functions. The first, omap2_init_common_infrastructure(), initializes the hwmod code and data, the OMAP PM code, and the clock code and data. The second, omap2_init_common_devices(), handles any other early device initialization that, for whatever reason, has not been or cannot be moved to initcalls or early platform devices. This patch is required for the hwmod postsetup patch, which allows board files to change the state that hwmods should be placed into at the conclusion of the hwmod _setup() function. For example, for a board whose creators wish to ensure watchdog coverage across the entire kernel boot process, code to change the watchdog's postsetup state will be added in the board-*.c file between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
* Merge branch 'devel-gpio' into omap-for-linusTony Lindgren2010-12-101-2/+1Star
|\
| * OMAP: GPIO: Implement GPIO as a platform deviceVaradarajan, Charulatha2010-12-081-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement GPIO as a platform device. GPIO APIs are used in machine_init functions. Hence it is required to complete GPIO probe before board_init. Therefore GPIO device register and driver register are implemented as postcore_initcalls. omap_gpio_init() does nothing now and this function would be removed in the next patch as it's usage is spread across most of the board files. Inorder to convert GPIO as platform device, modifications are required in clockxxxx_data.c file for OMAP1 so that device names can be used to obtain clock instead of getting clocks by name/NULL ptr. Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling or disabling the clocks, modify sysconfig settings and remove usage of clock FW APIs. Note 1: Converting GPIO driver to use runtime PM APIs is not done as a separate patch because GPIO clock names are different for various OMAPs and are different for some of the banks in the same CPU. This would need usage of cpu_is checks and bank id checks while using clock FW APIs in the gpio driver. Hence while making GPIO a platform driver framework, PM runtime APIs are used directly. Note 2: While implementing GPIO as a platform device, pm runtime APIs are used as mentioned above and modification is not done in gpio's prepare for idle/ resume after idle functions. This would be done in the next patch series and GPIO driver would be made to use dev_pm_ops instead of sysdev_class in that series only. Due to the above, the GPIO driver implicitly relies on CM_AUTOIDLE = 1 on its iclk for power management to work, since the driver never disables its iclk. This would be taken care in the next patch series (see Note 3 below). Refer to http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html for more details. Note 3: only pm_runtime_get_sync is called in gpio's probe() and pm_runtime_put* is never called. This is to make the implementation similar to the existing GPIO code. Another patch series would be sent to correct this. In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They are enabled/ disabled whenever required using clock framework APIs TODO: 1. Cleanup the GPIO driver. Use function pointers and register offest pointers instead of using hardcoded values 2. Remove all cpu_is_ checks and OMAP specific macros 3. Remove usage of gpio_bank array so that only instance specific information is used in driver code 4. Rename 'method'/ avoid it's usage 5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4 6. Modify gpio's prepare for idle/ resume after idle functions to use runtime pm implentation. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Basak, Partha <p-basak2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated for bank specific revision and updated boards] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Fix gpio_request calls to happen as arch_initcallTony Lindgren2010-12-081-1/+1
| | | | | | | | | | | | | | | | | | Looks like some boards are calling gpio_request from init_irq. This will make the request_irq fail, as GPIO will be initialized as postcore_initcall. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: mach-omap2: remove NULL board_mux from board filesAaro Koskinen2010-12-031-2/+0Star
|/ | | | | | | | | If CONFIG_OMAP_MUX is not enabled, we can define board_mux in the header file instead of forcing every single board to define it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [tony@atomide.com: updated for combined board-zoom files] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2010-10-251-3/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
| * OMAP: control: move plat-omap/control.h to mach-omap2/control.hPaul Walmsley2010-10-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
| * OMAP3: Keypad: Fix incorrect type initializerManjunath Kondaiah G2010-10-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The keypad matrix variable declaration is not matching with structure variable keymap declared in keypad_matrix.h. Due to this, following sparse warnings are generated with omap3_defconfig. arch/arm/mach-omap2/board-devkit8000.c:223:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-devkit8000.c:223:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-devkit8000.c:223:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-ldp.c:107:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-ldp.c:107:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-ldp.c:107:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-omap3evm.c:472:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-omap3evm.c:472:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-omap3evm.c:472:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-3430sdp.c:114:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-3430sdp.c:114:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-3430sdp.c:114:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-cm-t35.c:568:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-cm-t35.c:568:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-cm-t35.c:568:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-omap3stalker.c:415:13: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-omap3stalker.c:415:13: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-omap3stalker.c:415:13: got int static [toplevel] *<noident> This patch modifies the variable keymap declaration as per declaration in matrix_keymap structure. Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-input@vger.kernel.org Cc: Dmitry Torokhov <dtor@mail.ru> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * OMAP2plus: Fix static function warningsManjunath Kondaiah G2010-10-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes sparse warnings due non declarations of static functions. arch/arm/mach-omap2/timer-gp.c:115:12: warning: symbol 'omap2_gp_clockevent_set_gptimer' was not declared. Should it be static? arch/arm/mach-omap2/powerdomain.c:993:5: warning: symbol 'pwrdm_set_lowpwrstchange' was not declared. Should it be static? arch/arm/mach-omap2/board-flash.c:141:8: warning: symbol 'board_nand_init' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:416:6: warning: symbol 'n8x0_mmc_slot1_cover_handler' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:544:13: warning: symbol 'n8x0_mmc_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:902:13: warning: symbol 'rx51_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-video.c:107:13: warning: symbol 'rx51_video_mem_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-debugboard.c:155:12: warning: symbol 'zoom_debugboard_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-peripherals.c:280:13: warning: symbol 'zoom_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-igep0020.c:110:13: warning: symbol 'igep2_flash_init' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:109:6: warning: symbol 'am3517_evm_ethernet_init' was not declared. Should it be static? drivers/mtd/onenand/omap2.c:577:5: warning: symbol 'omap2_onenand_rephase' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: mmc: extended to pass host capabilities from board fileSukumar Ghorai2010-09-271-1/+2
| | | | | | | | | | | | | | | | | | wires variable is renamed, extended and this single variable to be used to pass the platform capabilities, e.g DDR mode. Also removed the hardcoded value was using as bus-width. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre2010-10-201-2/+0Star
|/ | | | | | | | | | | | | | | Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
* Merge branch 'devel-map-io' into omap-for-linusTony Lindgren2010-08-041-7/+2Star
|\
| * omap3: introduce omap3_map_ioMike Rapoport2010-08-041-7/+1Star
| | | | | | | | | | | | | | | | | | | | Most OMAP3-based boards use exactly the same code for .map_io method in the machine_desc structure. This patch introduces omap3_map_io and updates board-* files to use it as .map_io method. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap3: Unify omap2_set_globals_3[43,6x]x functionsSergio Aguirre2010-08-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The only difference between them is the physical address of the uart4 port, which is only present in 36xx chips. We don't really need to care about keeping these 2 functions, since the decision to use uart4 is more cleanly done later when we do have access to omap_revision variable. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: added comment for the uart4_phys] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP: Convert to use ->reserve method to reserve boot time memoryRussell King2010-07-161-0/+1
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | omap3: add support for NAND on LDP boardSukumar Ghorai2010-08-021-0/+35
|/ | | | | | | | patch adds NAND support to LDP board. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap: switch over to gpio_set_debounceFelipe Balbi2010-05-271-2/+1Star
| | | | | | | | | | | | Stop using the omap-specific implementations for gpio debouncing now that gpiolib provides its own support. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brownell <david-b@pacbell.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* omap: musb: Pass board specific data from board fileMaulik Mankad2010-02-201-1/+7
| | | | | | | | | | | | | | | | | | Pass board specific data for MUSB (like interface_type, mode etc) from board file by defining board specific structure. Each board file can define this structure based on its requirement and pass this information to the driver. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Gupta Ajay Kumar <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Rename hsmmc symbols to reflect independence from twl4030Adrian Hunter2010-02-151-2/+2
| | | | | | | | hsmmc.[ch] no longer has any dependency on twl4030 and variable names should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Rename mmc-twl4030 files to hsmmcAdrian Hunter2010-02-151-1/+1
| | | | | | | | mmc-twl4030.[ch] no longer has any dependency on twl4030 and should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: Fix omap2_map_common_io for multi-omapTony Lindgren2010-02-151-1/+1
| | | | | | Fix omap2_map_common_io for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
* mfd: Rename twl4030* driver files to enable re-useSantosh Shilimkar2009-12-131-1/+1
| | | | | | | | | | | | | | | The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* omap: mux: Add new style init functions to omap3 board-*.c filesTony Lindgren2009-12-121-0/+10
| | | | | | | | | Add new style mux init functions to omap3 board-*.c files So far Beagle has been confirmed to be a CBB package, and CM-T35 a CUS package. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch '7xx-iosplit-plat' with omap-fixesTony Lindgren2009-11-111-7/+7
|\
| * omap: headers: Move remaining headers from include/mach to include/platTony Lindgren2009-10-201-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Fix DEBUG_LL UART io addressSantosh Shilimkar2009-10-201-1/+1
| | | | | | | | | | | | | | | | This patch fixes the low level debug UART io address as per this series. The change is essential to have CONFIG_DEBUG_LL working. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 ↵Janusz Krzysztofik2009-10-221-1/+1
|/ | | | | | | | | | | | | boards that use matrix_keypad Only mach-omap2 boards are currently using matrix_keypad. Allow mach-omap1 boards to use the old style keypad.h without breaking. Created against linux-2.6.32-rc5. Compile tested with omap_3430sdp_defconfig and rx51_defconfig. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Fix matrix_keymap_data usageTony Lindgren2009-09-251-3/+7
| | | | | | | | | | Otherwise we'll get compile errors like: arch/arm/plat-omap/include/mach/keypad.h:38:1: warning: "KEY" redefined arch/arm/plat-omap/include/mach/keypad.h:39:1: warning: "PERSISTENT_KEY" redefined ... Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2/3 board-*.c files: read bootloader configuration earlierPaul Walmsley2009-09-031-10/+10
| | | | | | | | | | | | | Most board-*.c files read configuration data from the bootloader in their .init_machine() function. This needs to happen earlier, at some point before omap2_init_common_hw() is called. This is because a future patch will use the bootloader serial console port information to enable the UART clocks earlier, immediately after omap2_clk_init(). This is in turn necessary since otherwise clock tree usecounts on clocks like dpll4_m2x2_ck will be bogus, which can cause the currently-active console UART clock to be disabled during boot. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idleKalle Valo2009-08-281-5/+0Star
| | | | | | | | | | | | | | | | OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3 SDRC: add support for 2 SDRAM chip selectsJean Pihet2009-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP3: Initialize more devices for LDPTony Lindgren2009-05-281-1/+203
| | | | | | | | | | Based on an earlier patches by Stanley.Miao <stanley.miao@windriver.com> and Nishant Kamat <nskamat@ti.com>. Note that at the ads7846 support still needs support for vaux_control for the touchscreen to work. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP3: ZOOM MDK: Add FB support to board fileImre Deak2009-05-281-4/+15
| | | | | | | | | | Based on an earlier patch by Stanley.Miao <stanley.miao@windriver.com> with board-*.c changes split to avoid conflicts with other device updates. Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: convert omap ldp platform to use smsc911xSteve Glendinning2009-04-021-18/+29
| | | | | | | | from 2.6.29, smc911x isn't maintained anymore. A new driver, smsc911x, will replace it. so convert omap_ldp to use smsc911x driver. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
* Merge branch 'for-next' of ↵Russell King2009-03-251-4/+8
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
| * ARM: OMAP3: MUSB initialization for omap hw, v2Felipe Balbi2009-03-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a generic board-file for initializing usb on omap2430 and omap3 boards. Patch modified by Tony to build the module based on CONFIG_USB_MUSB_SOC. Also merged in a patch adding the nop xceiv from Ajay Kumar Gupta <ajay.gupta@ti.com>. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP: No need to include board-ldp.h from hardware.hTony Lindgren2009-03-241-4/+6
| | | | | | | | | | | | | | | | Move the defines to the associated board file and remove the now unnecessary header file. Also rename OMAP34XX_ETHR_START to LDP_ETHR_START. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.hRussell King2009-03-251-1/+1
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'omap-clks3' into develRussell King2009-03-191-1/+1
|\ \ | |/ |/| | | | | | | Conflicts: arch/arm/mach-omap2/clock.c
| * [ARM] OMAP2 SDRC: add SDRAM timing parameter infrastructurePaul Walmsley2009-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For a given SDRAM clock rate, SDRAM chips require memory controllers to use a specific set of timing minimums and maximums to transfer data reliably. These parameters can be different for different memory chips and can also potentially vary by board. This patch adds the infrastructure for board-*.c files to pass this timing data to the SDRAM controller init function. The timing data is specified in an 'omap_sdrc_params' structure, in terms of SDRC controller register values. An array of these structs, one per SDRC target clock rate, is passed by the board-*.c file to omap2_init_common_hw(). This patch does not define the values for different memory chips, nor does it use the values for anything; those will come in subsequent patches. linux-omap source commit is bc84ecfc795c2d1c5cda8da4127cf972f488a696. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | OMAP: enable smc911x support for LDP platformRussell King2009-03-031-1/+1
|/ | | | | | | | | | | | | The following patch enables SMC911x support to work on the OMAP LDP board. Although the SMC911x driver will eventually be obsoleted, the smsc911x patches are rather invasive for the -rc kernels. Rather than risk destablising smsc911x, this simpler patch is preferred to allow the network interface to work. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ARM: OMAP: Fix gpio by switching to generic gpio calls, v2Jarkko Nikula2009-01-151-1/+1
| | | | | | | | | | | | | | Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap mmc: Add low-level initialization for hsmmc controllerTony Lindgren2008-12-111-1/+39
| | | | | | | | | | | | | | | | | | | | | | | Add low-level initialization for hsmmc controller. Merged into this patch patch are various improvments and board support by Grazvydas Ignotas and David Brownell. Also change wire4 to be wires, as some newer controllers support 8 data lines. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP3: LDP: Add Ethernet device support to make ldp boot succeessStanley.Miao2008-12-111-0/+57
| | | | | | | | | | Add Ethernet device support in board-ldp.c to make ldp can boot and mount nfs successfully. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
* ARM: OMAP3: Add basic board support for OMAP LDPNishant Kamat2008-10-101-0/+86
This adds minimal board support for the OMAP3430 LDP development platform. Signed-off-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-13 11:54:37 +0200