summaryrefslogtreecommitdiffstats
path: root/arch/i386
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] x86-64/i386: Fix CPU model for family 6Suresh Siddha2005-11-151-2/+2
| | | | | | | | | | | According to cpuid instruction in IA32 SDM-Vol2, when computing cpu model, we need to consider extended model ID for family 0x6 also. AK: Also added fixes/simplifcation from Petr Vandrovec Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386/x86-64: Share interrupt vectors when there is a large number of ↵James Cleverdon2005-11-151-8/+7Star
| | | | | | | | | | | | | | | | | | | | | interrupt sources Here's a patch that builds on Natalie Protasevich's IRQ compression patch and tries to work for MPS boots as well as ACPI. It is meant for a 4-node IBM x460 NUMA box, which was dying because it had interrupt pins with GSI numbers > NR_IRQS and thus overflowed irq_desc. The problem is that this system has 270 GSIs (which are 1:1 mapped with I/O APIC RTEs) and an 8-node box would have 540. This is much bigger than NR_IRQS (224 for both i386 and x86_64). Also, there aren't enough vectors to go around. There are about 190 usable vectors, not counting the reserved ones and the unused vectors at 0x20 to 0x2F. So, my patch attempts to compress the GSI range and share vectors by sharing IRQs. Cc: "Protasevich, Natalie" <Natalie.Protasevich@unisys.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Make i386 compile again with fourth DMA32 zoneAndi Kleen2005-11-151-2/+2
| | | | | | | | The code should deal with an additional empty zone, so fix up the #error. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] toshiba_ohci1394_dmi_table should be __devinitdata, not __devinitRoland Dreier2005-11-021-1/+1
| | | | | | | | | | | | | | | | I don't really understand why gcc gives the error it does, but without this patch, when building with CONFIG_HOTPLUG=n, I get errors like: CC arch/x86_64/pci/../../i386/pci/fixup.o arch/x86_64/pci/../../i386/pci/fixup.c: In function `pci_fixup_i450nx': arch/x86_64/pci/../../i386/pci/fixup.c:13: error: pci_fixup_i450nx causes a section type conflict The change is obviously correct: an array should be declared __devinitdata rather that __devinit. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Martin J. Bligh <mbligh@mbligh.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Revert "i386: move apic init in init_IRQs"Linus Torvalds2005-11-015-97/+70Star
| | | | | | | | Commit f2b36db692b7ff6972320ad9839ae656a3b0ee3e causes a bootup hang on at least one machine. Revert for now until we understand why. The old code may be ugly, but it works. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386: CONFIG_PC removalArthur Othieno2005-10-311-5/+0Star
| | | | | | | | | CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with the subarch split. Remove it, and fixup the remaining users to depend on CONFIG_X86_PC instead. Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix missing includesTim Schmielau2005-10-315-0/+5
| | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hpet-RTC: cache the comparator registerClemens Ladisch2005-10-311-1/+4
| | | | | | | | | | | | Reads from an HPET register require a round trip to the south bridge and are almost as slow as PCI reads. By caching the last value we've written to the comparator register, we can eliminate all HPET reads from the fast path in the emulated RTC interrupt handler. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hpet-RTC: fix timer config register accessesClemens Ladisch2005-10-311-7/+2Star
| | | | | | | | | | | | | | | | Make sure that the RTC timer is in non-periodic mode; some stupid BIOS might have initialized it to periodic mode. Furthermore, don't set the SETVAL bit in the config register. This wouldn't have any effect unless the timer was in period mode (which it isn't), and then the actual timer frequency would be half that of the desired one because incrementing the comparator in the interrupt handler would be done after the hardware has already incremented it itself. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hpet-RTC: disable interrupt when no longer neededClemens Ladisch2005-10-311-1/+5
| | | | | | | | | | | | | | | When the emulated RTC interrupt is no longer needed, we better disable it; otherwise, we get a spurious interrupt whenever the timer has rolled over and reaches the same comparator value. Having a superfluous interrupt every five minutes doesn't hurt much, but it's bad style anyway. ;-) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sparse cleanups: NULL pointers, C99 struct init.Randy Dunlap2005-10-311-1/+1
| | | | | | | | | | | | Convert most of the remaining "Using plain integer as NULL pointer" sparse warnings to use NULL. (Not duplicating patches that are already in -mm, -bird, or -kj.) Convert isdn driver struct initializer to use C99 syntax. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] jiffies_64 cleanupThomas Gleixner2005-10-311-4/+0Star
| | | | | | | | | Define jiffies_64 in kernel/timer.c rather than having 24 duplicated defines in each architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] unify sys_ptrace prototypeChristoph Hellwig2005-10-311-1/+1
| | | | | | | | | | Make sure we always return, as all syscalls should. Also move the common prototype to <linux/syscalls.h> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386: use -mcpu, not -mtune, for GCCs older than 3.4Paolo 'Blaisorblade' Giarrusso2005-10-311-5/+13
| | | | | | | | | | | | | | | | | | | | | | | I just noted that -mtune is used, which is only supported on recent GCCs; by reading http://gcc.gnu.org/gcc-3.4/changes.html, you see "-mcpu has been renamed to -mtune.", so for GCC < 3.4 we're not using any specific tuning in the appropriate cases. However -mcpu is deprecated, so use -mtune when possible. This was introduced by commit e9d4dce954a60dc23dd1d967766ca2347b780e54 of the old tree (between 2.6.10-rc3 and 2.6.10) by Linus Torvalds, to remove the use of -march, since that could trigger gcc using SSE on its own. But no attention was used about using -mcpu vs. -mtune. And btw, the old 2.6.4 code (for instance) was: cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUMM) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] uml: reuse i386 cpu-specific tuningPaolo 'Blaisorblade' Giarrusso2005-10-314-337/+345
| | | | | | | | | | | | | | | | | | Make UML share the underlying cpu-specific tuning done on i386. Actually, for now many config options aren't used a lot - but that can be done later. Also, UML relies on GCC optimization for things like memcpy and such more than i386, so specifying the correct -march and -mtune should be enough. Later, we may want to correct some other stuff. For instance, since FPU context switching, for us, is done (at least partially, i.e. between our kernelspace and userspace) by the host, we may allow usage of FPU operations by GCC. This doesn't hold for kernelspace vs. kernelspace, but we don't support preemption. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] create and destroy cache sysfs entries based on cpu notifiersAshok Raj2005-10-311-17/+43
| | | | | | | | | | | | | | | | | | | | cpu cache entries should be populated only when cpu is online and removed when they are logically offlined. Without which entries are not removed when cpu is offlined, or dont appear when we boot with maxcpus=1 and then kick the rest of the cpus via echo 1 to the sysfs online file. - Changed __devinit to __cpuinit for consistency. - Changed sysfs_driver_register to register_cpu_notifier. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Zwane Mwaikambo <zwane@holomorphy.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386: srat on non-acpi hw fixMagnus Damm2005-10-311-1/+6
| | | | | | | | | | This patch adds a check for the return value of acpi_find_root_pointer(). Without this patch systems without ACPI support such as QEMU crashes when booting a NUMA kernel with CONFIG_ACPI_SRAT=y. Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386 mpparse: Only ignore lapic information we can't storeEric W. Biederman2005-10-311-16/+19
| | | | | | | | | | | | | | | | | After staring at mpparse.c for a little longer I noticed that when we hit our limit of num_processors we are filtering out information about other processors that we can still store. This patch just reorders the code so we store everything we can. This should avoid the incorrect warning about our boot CPU not being listed by the BIOS that we are now getting in the kexec on panic case, and it should allow us to detect all apicid conflicts even when our physical number of cpus exceeds maxcpus. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kdump/i386: apic verification failure fixVivek Goyal2005-10-311-2/+1Star
| | | | | | | | | | | | | | | | | | | | | o Removes the unnecessary call to local_irq_disable(). o Kdump was failing while second kernel was coming up. Check for presence of boot cpu apic id was failing in (apic_id_registered), hence hitting BUG(). o This should not have failed because before calling setup_local_APIC(), it is ensured that even if BIOS has not reported boot cpu, then hard set the prence of it. Problem happens because of usage of hard_smp_processor_id() which is hardcoded to zero in case of non SMP kernel. In kdump case second kernel can boot on a cpu whose boot cpu id is not zero. o Using boot_cpu_physical_apicid instead to hard set the presence of boot cpu. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Clean up mtrr compat ioctl codeBrian Gerst2005-10-311-45/+74
| | | | | | | | | | Handle 32-bit mtrr ioctls in the mtrr driver instead of the ia32 compatability layer. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: vmx cpu feature detectionKamble, Nitin A2005-10-311-1/+1
| | | | | | | | | If VMX feature is available in the CPU, this patch will make it visible in the /proc/cpuinfo with the cpuid detection. Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386 kexec-on-panic: Don't shutdown the apics.Eric W. Biederman2005-10-311-7/+0Star
| | | | | | | | | | | | | | It is dangerous to shutdown the apics in machine_crash_shutdown. With my previous patch to initialize apics in init_IRQ we should be able to boot a kernel without this. As long as we reinitialize the APICs we don't care what state they were in during bootup. This should make machine_crash_shutdown noticeably more reliable. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386: move apic init in init_IRQsEric W. Biederman2005-10-315-71/+100
| | | | | | | | | | | | | | | | | | | | | | | | All kinds of ugliness exists because we don't initialize the apics during init_IRQs. - We calibrate jiffies in non apic mode even when we are using apics. - We have to have special code to initialize the apics when non-smp. - The legacy i8259 must exist and be setup correctly, even when we won't use it past initialization. - The kexec on panic code must restore the state of the io_apics. - init/main.c needs a special case for !smp smp_init on x86 In addition to pure code movement I needed a couple of non-obvious changes: - Move setup_boot_APIC_clock into APIC_late_time_init for simplicity. - Use cpu_khz to generate a better approximation of loops_per_jiffies so I can verify the timer interrupt is working. - Call setup_apic_nmi_watchdog again after cpu_khz is initialized on the boot cpu. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386 nmi_watchdog: Merge check_nmi_watchdog fixes from x86_64Eric W. Biederman2005-10-311-2/+37
| | | | | | | | | | | | | | | The per cpu nmi watchdog timer is based on an event counter. idle cpus don't generate events so the NMI watchdog doesn't fire and the test to see if the watchdog is working fails. - Add nmi_cpu_busy so idle cpus don't mess up the test. - kmalloc prev_nmi_count to keep kernel stack usage bounded. - Improve the error message on failure so there is enough information to debug problems. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386 io_apic.c: Memorize at bootup where the i8259 is connectedEric W. Biederman2005-10-311-35/+112
| | | | | | | | | | | | | | | | | | | | | | Currently we attempt to restore virtual wire mode on reboot, which only works if we can figure out where the i8259 is connected. This is very useful when we kexec another kernel and likely helpful when dealing with a BIOS that make assumptions about how the system is setup. Since the acpi MADT table does not provide the location where the i8259 is connected we have to look at the hardware to figure it out. Most systems have the i8259 connected the local apic of the cpu so won't be affected but people running Opteron and some serverworks chipsets should be able to use kexec now. In addition this patch removes the hard coded assumption that the io_apic that delivers isa interrups is always known to the kernel as io_apic 0. As there does not appear to be anything to guarantee that assumption is true. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ES7000 platform updateNatalie.Protasevich@unisys.com2005-10-312-5/+17
| | | | | | | | | | | This is platform code update for ES7000: disables IRQ overrides for the recent ES7000 (Rascal/Zorro), cleans up the compile warning. The patch only affects the ES7000 subarch. Signed-off-by: <Natalie.Protasevich@unisys.com> Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: when L3 is present show its size in /proc/cpuinfoVenkatesh Pallipadi2005-10-311-7/+1Star
| | | | | | | | | | | | The code that prints the cache size assumes that L3 always lives in chipset and is shared across CPUs. Which is not really true. I think all the cachesizes reported by cpuid are in the processor itself. The attached patch changes the code to reflect that. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fixup bogus e820 entry with mem=Dave Hansen2005-10-311-7/+17
| | | | | | | | | | | | | | | | | This was reported because someone was getting oopses reading /proc/iomem. It was tracked down to a zero-sized 'struct resource' entry which was located right at 4GB. You need two conditions to hit this bug: a BIOS E820_RAM area starting at exactly the boundary where you specify mem= (to get a zero-sized entry), and for the legacy_init_iomem_resources() loop to skip that resource (which only happens at exactly 4G). I think the killing zero-sized e820 entry is the easiest way to fix this. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] asus vt8235 router buggy bios workaroundaleksey_gorelov@phoenix.com2005-10-311-19/+36
| | | | | | | | | | | | | | | | Hopefully fix http://bugzilla.kernel.org/show_bug.cgi?id=5235 Similar problem has been reported before here: http://groups.google.com/group/linux.kernel/browse_thread/thread/def4ca19dbc3cd4/5cffbf349f2c87a4?tvc=2&q=Aleksey+Gorelov&hl=en#5cffbf349f2c87a4 and was related to bug in BIOS reporting 82C686 router compatible to 586. I suspect BIOS on this board has similar issue: reports VT8235 router to be compatible with 586 one - which is obviously not true. Patch from the link above has already incorporated in both 2.6 & 2.4 series, but might not work in this particular case. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: bug fix in P6 Machine check initializationVenkatesh Pallipadi2005-10-311-3/+8
| | | | | | | | | | | | | Make P6 MCA initialization code complaint with guidelines in IA-32 SDM Vol3. Bank 0 control register should not be set by OS and clear status registers on all banks on reset. This will prevent false MCE alarms on the systems that has some non-MCE information left-over in MC0_STATUS on reboot. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: add an accessor function for getting the per-CPU gdtZachary Amsden2005-10-313-24/+27
| | | | | | | | | | Add an accessor function for getting the per-CPU gdt. Callee must already have the CPU. Signed-off-by: Zachary Amsden <zach@vmware.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: bogus tls from gdtZachary Amsden2005-10-311-6/+0Star
| | | | | | | | | | | | The per-CPU initialization code is copying in bogus data into thread->tls_array. Note that it copies &per_cpu(cpu_gdt_table, cpu), not &per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TLS_MIN). That is totally broken and unnecessary. Make the initialization explicitly NULL. Signed-off-by: Zachary Amsden <zach@vmware.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: hot plug CPU to support physical add of new processorsNatalie Protasevich2005-10-313-7/+11
| | | | | | | | | | | | | | The patch allows physical bring-up of new processors (not initially present in the configuration) from facilities such as driver/utility implemented on a platform. The actual method of making processors available is up to the platform implementation. Signed-off-by: Natalie Protasevich <Natalie.Protasevich@unisys.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Zwane Mwaikambo <zwane@holomorphy.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intel_cacheinfo: remove MAX_CACHE_LEAVES limitSiddha, Suresh B2005-10-311-12/+6Star
| | | | | | | | | | | | | | | | | | Initial internal version of Venki's cpuid(4) deterministic cache parameter identification patch used static arrays of size MAX_CACHE_LEAVES. Final patch which made to the base used dynamic array allocation, with this MAX_CACHE_LEAVES limit hunk still in place. cpuid(4) already has a mechanism to find out the number of cache levels implemented and there is no need for this hardcoded MAX_CACHE_LEAVES limit. So remove the MAX_CACHE_LEAVES limit from the routine which calculates the number of cache levels using cpuid(4) Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: initialise tss->io_bitmap_owner to somethingBart Oldeman2005-10-311-0/+1
| | | | | | | | | | There exists a field io_bitmap_owner in the TSS that is only checked, but never set to anything else but NULL. Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] FPU context corrupted after resumeShaohua Li2005-10-311-7/+5Star
| | | | | | | | | | | | | | mxcsr_feature_mask_init isn't needed in suspend/resume time (we can use boot time mask). And actually it's harmful, as it clear task's saved fxsave in resume. This bug is widely seen by users using zsh. (akpm: my eyes. Fixed some surrounding whitespace mess) Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86: cmpxchg improvementsJan Beulich2005-10-311-0/+5
| | | | | | | | | | | | | | | This adjusts i386's cmpxchg patterns so that - for word and long cmpxchg-es the compiler can utilize all possible registers - cmpxchg8b gets disabled when the minimum specified hardware architectur doesn't support it (like was already happening for the byte, word, and long ones). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386 and x86_64 TSC set_cyc2ns_scale imprecisionMathieu Desnoyers2005-10-312-14/+24
| | | | | | | | | | | | | | | | | I just found out that some precision is unnecessarily lost in the arch/i386/kernel/timers/timer_tsc.c:set_cyc2ns_scale function. It uses a cpu_mhz parameter when it could use a cpu_khz. In the specific case of an Intel P4 running at 3001.171 Mhz, the truncation to 3001 Mhz leads to an imprecision of 19 microseconds per second : this is very sad for a timer with nearly nanosecond accuracy. Fix the x86_64 architecture too. Cc: george anzinger <george@mvista.com> Cc: john stultz <johnstul@us.ibm.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] CONFIG_IA32Brian Gerst2005-10-311-1/+5
| | | | | | | | | | | | | Add CONFIG_X86_32 for i386. This allows selecting options that only apply to 32-bit systems. (X86 && !X86_64) becomes X86_32 (X86 || X86_64) becomes X86 Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] memory hotplug: i386 addition functionsDave Hansen2005-10-302-7/+59
| | | | | | | | | Adds the necessary for non-NUMA hot-add of highmem to an existing zone on i386. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] memory hotplug locking: node_size_lockDave Hansen2005-10-301-0/+3
| | | | | | | | | | | | | | | | | | | | pgdat->node_size_lock is basically only neeeded in one place in the normal code: show_mem(), which is the arch-specific sysrq-m printing function. Strictly speaking, the architectures not doing memory hotplug do no need this locking in show_mem(). However, they are all included for completeness. This should also make any future consolidation of all of the implementations a little more straightforward. This lock is also held in the sparsemem code during a memory removal, as sections are invalidated. This is the place there pfn_valid() is made false for a memory area that's being removed. The lock is only required when doing pfn_valid() operations on memory which the user does not already have a reference on the page, such as in show_mem(). Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: split page table lockHugh Dickins2005-10-301-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with a many-threaded application which concurrently initializes different parts of a large anonymous area. This patch corrects that, by using a separate spinlock per page table page, to guard the page table entries in that page, instead of using the mm's single page_table_lock. (But even then, page_table_lock is still used to guard page table allocation, and anon_vma allocation.) In this implementation, the spinlock is tucked inside the struct page of the page table page: with a BUILD_BUG_ON in case it overflows - which it would in the case of 32-bit PA-RISC with spinlock debugging enabled. Splitting the lock is not quite for free: another cacheline access. Ideally, I suppose we would use split ptlock only for multi-threaded processes on multi-cpu machines; but deciding that dynamically would have its own costs. So for now enable it by config, at some number of cpus - since the Kconfig language doesn't support inequalities, let preprocessor compare that with NR_CPUS. But I don't think it's worth being user-configurable: for good testing of both split and unsplit configs, split now at 4 cpus, and perhaps change that to 8 later. There is a benefit even for singly threaded processes: kswapd can be attacking one part of the mm while another part is busy faulting. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: i386 sh sh64 ready for split ptlockHugh Dickins2005-10-301-10/+7Star
| | | | | | | | | | | | | | | | | | | | | Use pte_offset_map_lock, instead of pte_offset_map (or inappropriate pte_offset_kernel) and mm-wide page_table_lock, in sundry arch places. The i386 vm86 mark_screen_rdonly: yes, there was and is an assumption that the screen fits inside the one page table, as indeed it does. The sh __do_page_fault: which handles both kernel faults (without lock) and user mm faults (locked - though it set_pte without locking before). The sh64 flush_cache_range and helpers: which wrongly thought callers held page_table_lock before (only its tlb_start_vma did, and no longer does so); moved the flush loop down, and adjusted the large versus small range decision to consider a range which spans page tables as large. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: kill check_user_page_readableHugh Dickins2005-10-301-25/+13Star
| | | | | | | | | | | | | | | | | | | | | | | | | check_user_page_readable is a problematic variant of follow_page. It's used only by oprofile's i386 and arm backtrace code, at interrupt time, to establish whether a userspace stackframe is currently readable. This is problematic, because we want to push the page_table_lock down inside follow_page, and later split it; whereas oprofile is doing a spin_trylock on it (in the i386 case, forgotten in the arm case), and needs that to pin perhaps two pages spanned by the stackframe (which might be covered by different locks when we split). I think oprofile is going about this in the wrong way: it doesn't need to know the area is readable (neither i386 nor arm uses read protection of user pages), it doesn't need to pin the memory, it should simply __copy_from_user_inatomic, and see if that succeeds or not. Sorry, but I've not got around to devising the sparse __user annotations for this. Then we can eliminate check_user_page_readable, and return to a single follow_page without the __follow_page variants. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: init_mm without ptlockHugh Dickins2005-10-301-3/+1Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First step in pushing down the page_table_lock. init_mm.page_table_lock has been used throughout the architectures (usually for ioremap): not to serialize kernel address space allocation (that's usually vmlist_lock), but because pud_alloc,pmd_alloc,pte_alloc_kernel expect caller holds it. Reverse that: don't lock or unlock init_mm.page_table_lock in any of the architectures; instead rely on pud_alloc,pmd_alloc,pte_alloc_kernel to take and drop it when allocating a new one, to check lest a racing task already did. Similarly no page_table_lock in vmalloc's map_vm_area. Some temporary ugliness in __pud_alloc and __pmd_alloc: since they also handle user mms, which are converted only by a later patch, for now they have to lock differently according to whether or not it's init_mm. If sources get muddled, there's a danger that an arch source taking init_mm.page_table_lock will be mixed with common source also taking it (or neither take it). So break the rules and make another change, which should break the build for such a mismatch: remove the redundant mm arg from pte_alloc_kernel (ppc64 scrapped its distinct ioremap_mm in 2.6.13). Exceptions: arm26 used pte_alloc_kernel on user mm, now pte_alloc_map; ia64 used pte_alloc_map on init_mm, now pte_alloc_kernel; parisc had bad args to pmd_alloc and pte_alloc_kernel in unused USE_HPPA_IOREMAP code; ppc64 map_io_page forgot to unlock on failure; ppc mmu_mapin_ram and ppc64 im_free took page_table_lock for no good reason. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI fixup for Toshiba laptops and ohci1394Jesse Barnes2005-10-291-0/+59
| | | | | | | | | | | | | | | | | | | This is a fix for a bug I see on my Toshiba laptop, where the ohci1394 controller gets initialized improperly. The patch adds two PCI fixups to arch/i386/pci/fixup.c, one that happens early on to cache the value of the PCI_CACHE_LINE_SIZE config register, and another that later restores the value, along with a valid IRQ number and some BAR values. I've tested it on my laptop, and it prevents me from running into what I consider to be a major bug: IRQ 11 is disabled by the IRQ debug code, causing my wireless to break. Thanks to Rob for the original patch to ohci1394.c and Stefan for lots of proofreading (and a last minute bug caught in review!) and additional information collection. I think the DMI system list is correct, but we may need to add some more PCI IDs to the PCI_FIXUP macros over time. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Driver Core: fix up all callers of class_device_create()Greg Kroah-Hartman2005-10-282-2/+2
| | | | | | | | The previous patch adding the ability to nest struct class_device changed the paramaters to the call class_device_create(). This patch fixes up all in-kernel users of the function. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] typo fix in last cpufreq powernow patchChris Wright2005-10-221-1/+1
| | | | | | | | Not sure how it slipped by, but here's a trivial typo fix for powernow. Signed-off-by: Chris Wright <chrisw@osdl.org> [ It's "nurter" backwards.. Maybe we have a hillbilly The Shining fan? ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cpufreq: fix pending powernow timer stuck conditionDave Jones2005-10-211-11/+19
| | | | | | | | | | | | | | | | | | | | AMD recently discovered that on some hardware, there is a race condition possible when a C-state change request goes onto the bus at the same time as a P-state change request. Both requests happen, but the southbridge hardware only acknowledges the C-state change. The PowerNow! driver is then stuck in a loop, waiting for the P-state change acknowledgement. The driver eventually times out, but can no longer perform P-state changes. It turns out the solution is to resend the P-state change, which the southbridge will acknowledge normally. Thanks to Johannes Winkelmann for reporting this and testing the fix. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386: Don't discard upper 32bits of HWCR on K8Andi Kleen2005-10-111-1/+1
| | | | | | | | | | | Need to use long long, not long when RMWing a MSR. I think it's harmless right now, but still should be better fixed if AMD adds any bits in the upper 32bit of HWCR. Bug was introduced with the TLB flush filter fix for i386 Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-12 07:32:54 +0200