summaryrefslogtreecommitdiffstats
path: root/arch/mips/ralink
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: ralink: mt7620: Add spi clock definitionJohn Crispin2013-09-041-0/+1
| | | | | | | | | | | | | Register a clock device for the SPI block of the MT7620 SoC. The clock device will be used by the SPI host controller driver to determine the base clock of the controller. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: mt7620: Add wdt clock definitionJohn Crispin2013-09-041-0/+1
| | | | | | | | | | | | | | | | | | | The watchdog driver of the SoC uses the clk API to get the clock associated with the watchdog device. However the MT7620 specific setup code does not register a clock for the watchdog device yet which leads to the following error: rt2880_wdt: probe of 10000120.watchdog failed with error -2 Register a clock device for the watchdog in order to avoid the error and make the watchdog usable. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: mt7620: Improve clock frequency detectionGabor Juhos2013-09-041-25/+175
| | | | | | | | | | | | | | | | | | | | | The current code assumes that the peripheral clock always runs at 40MHz which is not true in all configuration. The peripheral clock can also use the reference clock instead of the fixed 40MHz rate. If the reference clock runs at a different rate, various peripheries are behaving incorrectly. Additionally, the currectly calculated system clock is also wrong. The actual value what the code computes is the rate of the DRAM which can be different from the system clock. Add new helper functions to get the rate of the different clocks and use the correct values for the registered clock devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5755/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: mt7620: This SoC has EHCI and OHCI hostsJohn Crispin2013-09-041-0/+2
| | | | | | | | | Select the the EHCI and OHCI symbols. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5675/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: mt7620: Add verbose ram infoJohn Crispin2013-09-041-0/+3
| | | | | | | | | Make the code print which of SDRAM, DDR1 or DDR2 was detected. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/5671/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: Probe clocksources from OFJohn Crispin2013-09-041-0/+1
| | | | | | | | | | Make plat_time_init() call clocksource_of_init() allowing the systick cevt to load. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/5670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: Add support for systick timer found on newer ralink SoCJohn Crispin2013-09-043-0/+154
| | | | | | | | | | | Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent of the SoC master clock. If we want to automatic frequency scaling to work we need to use the systick timer as the clock source. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: Add support for periodic timer irqJohn Crispin2013-09-042-1/+186
| | | | | | | | | Adds a driver for the periodic timer found on Ralink SoC. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5682/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Delete __cpuinit/__CPUINIT usage from MIPS codePaul Gortmaker2013-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Ralink: Use strlcpy() instead of strncpy().Chen Gang2013-06-101-1/+1
| | | | | | | | | | | | | | | | | 'compatible' is used by strlen() in __of_device_is_compatible(). Ensure strings are always '\0' terminated. 'of_ids is not a structure in "include/uapi/*", so no need to initialize it completly; using strlcpy() instead of strncpy() will do. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: John Crispin <blogic@openwrt.org> Cc: juhosg@openwrt.org Cc: linux-mips@linux-mips.org Cc: Linux-Arch <linux-arch@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/5330/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: add missing SZ_1M multiplierJohn Crispin2013-06-061-1/+1
| | | | | | | | | | On RT5350 the memory size is set to Bytes and not MegaBytes due to a missing multiplier. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/5378/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: use the dwc2 driver for the rt305x USB controllerMatthijs Kooijman2013-05-172-0/+14
| | | | | | | | | | | | This sets up the devicetree file for the rt3050 chip series and rt3052 eval board to use the right compatible string for the dwc2 driver. Acked-by: John Crispin <blogic@openwrt.org> Cc: blogic@openwrt.org Cc: linux-mips@linux-mips.org Cc: Matthijs Kooijman <matthijs@stdin.nl> Patchwork: https://patchwork.linux-mips.org/patch/5226/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-05-1020-66/+1019
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: - More work on DT support for various platforms - Various fixes that were to late to make it straight into 3.9 - Improved platform support, in particular the Netlogic XLR and BCM63xx, and the SEAD3 and Malta eval boards. - Support for several Ralink SOC families. - Complete support for the microMIPS ASE which basically reencodes the existing MIPS32/MIPS64 ISA to use non-constant size instructions. - Some fallout from LTO work which remove old cruft and will generally make the MIPS kernel easier to maintain and resistant to compiler optimization, even in absence of LTO. - KVM support. While MIPS has announced hardware virtualization extensions this KVM extension uses trap and emulate mode for virtualization of MIPS32. More KVM work to add support for VZ hardware virtualizaiton extensions and MIPS64 will probably already be merged for 3.11. Most of this has been sitting in -next for a long time. All defconfigs have been build or run time tested except three for which fixes are being sent by other maintainers. Semantic conflict with kvm updates done as per Ralf * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits) MIPS: Add new GIC clockevent driver. MIPS: Formatting clean-ups for clocksources. MIPS: Refactor GIC clocksource code. MIPS: Move 'gic_frequency' to common location. MIPS: Move 'gic_present' to common location. MIPS: MIPS16e: Add unaligned access support. MIPS: MIPS16e: Support handling of delay slots. MIPS: MIPS16e: Add instruction formats. MIPS: microMIPS: Optimise 'strnlen' core library function. MIPS: microMIPS: Optimise 'strlen' core library function. MIPS: microMIPS: Optimise 'strncpy' core library function. MIPS: microMIPS: Optimise 'memset' core library function. MIPS: microMIPS: Add configuration option for microMIPS kernel. MIPS: microMIPS: Disable LL/SC and fix linker bug. MIPS: microMIPS: Add vdso support. MIPS: microMIPS: Add unaligned access support. MIPS: microMIPS: Support handling of delay slots. MIPS: microMIPS: Add support for exception handling. MIPS: microMIPS: Floating point support. MIPS: microMIPS: Fix macro naming in micro-assembler. ...
| * MIPS: ralink: make use of the new memory detection codeJohn Crispin2013-05-081-0/+9
| | | | | | | | | | | | | | | | Call detect_memory_region() from plat_mem_setup() unless the size was already read from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5184/
| * MIPS: ralink: add memory definition for MT7620John Crispin2013-05-081-0/+20
| | | | | | | | | | | | | | Populate struct soc_info with the data that describes our RAM window. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5183/
| * MIPS: ralink: add memory definition for RT3883John Crispin2013-05-081-0/+4
| | | | | | | | | | | | | | Populate struct soc_info with the data that describes our RAM window. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5182/
| * MIPS: ralink: add memory definition for RT2880John Crispin2013-05-081-0/+4
| | | | | | | | | | | | | | Populate struct soc_info with the data that describes our RAM window. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5181/
| * MIPS: ralink: add memory definition for RT305xJohn Crispin2013-05-081-0/+45
| | | | | | | | | | | | | | | | | | | | Populate struct soc_info with the data that describes our RAM window. As memory detection fails on RT5350 we read the amount of available memory from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5180/
| * MIPS: ralink: add memory definition to struct ralink_soc_infoJohn Crispin2013-05-081-0/+5
| | | | | | | | | | | | | | | | Depending on the actual SoC we have a different base address as well as minimum and maximum size for RAM. Add these fields to the per SoC structure. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5179/
| * DT: MIPS: ralink: add MT7620A dts filesJohn Crispin2013-05-084-0/+79
| | | | | | | | | | | | | | | | Add a dtsi file for MT7620A SoC and a sample dts file. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5190/
| * DT: MIPS: ralink: add RT3883 dts filesJohn Crispin2013-05-084-0/+79
| | | | | | | | | | | | | | | | Add a dtsi file for RT3883 SoC and a sample dts file. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5189/
| * DT: MIPS: ralink: add RT2880 dts filesJohn Crispin2013-05-084-0/+109
| | | | | | | | | | | | | | | | Add a dtsi file for RT2880 SoC and a sample dts file. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5188/
| * DT: MIPS: ralink: clean up RT3050 dtsi and dts fileJohn Crispin2013-05-082-58/+4Star
| | | | | | | | | | | | | | | | | | | | * remove nodes for cores whose drivers are not upstream yet * add compat string for an additional soc * fix a whitespace error Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5186/
| * MIPS: ralink: add cpu-feature-overrides.hGabor Juhos2013-05-081-0/+3
| | | | | | | | | | | | | | | | Add cpu-feature-overrides.h for RT288x, RT305x and RT3883. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5175/
| * MIPS: ralink: adds support for MT7620 SoC familyJohn Crispin2013-05-084-0/+223
| | | | | | | | | | | | | | | | | | | | Add support code for mt7620 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5177/
| * MIPS: ralink: adds support for RT3883 SoC familyJohn Crispin2013-05-084-0/+253
| | | | | | | | | | | | | | | | | | | | Add support code for rt3883 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5185/
| * MIPS: ralink: adds support for RT2880 SoC familyJohn Crispin2013-05-084-0/+148
| | | | | | | | | | | | | | | | | | | | Add support code for rt2880 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5176/
| * MIPS: ralink: add uart mask to struct ralink_pinmuxJohn Crispin2013-05-082-2/+4
| | | | | | | | | | | | | | Add a field for the uart muxing mask and set it inside the rt305x setup code. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5744/
| * MIPS: ralink: add pci group to struct ralink_pinmuxGabor Juhos2013-05-081-0/+3
| | | | | | | | | | | | | | | | This will be used for RT3662/RT3883. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5173/
| * MIPS: ralink: make the RT305x pinmuxing structure staticJohn Crispin2013-05-081-3/+3
| | | | | | | | | | | | | | | | These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can hence be static. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5172/
| * MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmuxJohn Crispin2013-05-082-2/+2
| | | | | | | | | | | | | | Add proper namespacing to the variable. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5171/
| * MIPS: ralink: make early_printk work on RT2880John Crispin2013-05-081-0/+4
| | | | | | | | | | | | | | | | RT2880 has a different location for the early serial port. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5170/
| * MIPS: ralink: add missing comment in irq driverJohn Crispin2013-05-081-0/+1
| | | | | | | | | | | | | | | | Trivial patch that adds a comment that makes the code more readable. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5168/
| * MIPS: ralink: fix RT305x clock setupJohn Crispin2013-05-081-0/+12
| | | | | | | | | | | | | | | | Add a few missing clocks. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5167/
| * MIPS: ralink: add PCI IRQ handlingGabor Juhos2013-05-081-0/+4
|/ | | | | | | | | The Ralink IRQ code was not handling the PCI IRQ yet. Add this functionaility to make PCI work on rt3883. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5165/
* MIPS: ralink: add CPU interrupt controller to of_irq_idsGabor Juhos2013-02-172-3/+17
| | | | | | | | | | Convert the ralink IRQ code to make use of the new MIPS IRQ controller OF mappings. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: David Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4900/
* MIPS: ralink: adds Kbuild filesJohn Crispin2013-02-174-0/+58
| | | | | | | | | Add the Kbuild symbols and Makefiles needed to actually build the ralink code from this series Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4899/
* MIPS: ralink: adds rt305x devicetreeJohn Crispin2013-02-172-0/+148
| | | | | | | | This adds the devicetree file that describes the rt305x evaluation kit. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4898/
* MIPS: ralink: adds support for RT305x SoC familyJohn Crispin2013-02-171-0/+242
| | | | | | | | | | Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
* MIPS: ralink: adds early_printk supportJohn Crispin2013-02-171-0/+44
| | | | | | | | Add the code needed to make early printk work. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4897/
* MIPS: ralink: adds OF codeJohn Crispin2013-02-171-0/+107
| | | | | | | | | | Until there is a generic MIPS way of handing the DTB over from bootloader to kernel we rely on a built in devicetrees. The OF code also remaps those register ranges that we use global in our drivers. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4895/
* MIPS: ralink: adds clkdev codeJohn Crispin2013-02-171-0/+72
| | | | | | | | | These SoCs have a limited number of fixed rate clocks. Add support for the clk and clkdev api. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4894/
* MIPS: ralink: adds prom and cmdline codeJohn Crispin2013-02-171-0/+69
| | | | | | | | Add minimal code to handle commandlines. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4892/
* MIPS: ralink: adds reset codeJohn Crispin2013-02-171-0/+44
| | | | | | | | Resetting these SoCs requires no real magic. The code is straight forward. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4891/
* MIPS: ralink: adds irq codeJohn Crispin2013-02-171-0/+176
| | | | | | | | | All of the Ralink Wifi SoC currently supported by this series share the same interrupt controller (INTC). Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4890/
* MIPS: ralink: adds include filesJohn Crispin2013-02-171-0/+44
Before we start adding the platform code we add the common include files. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4893/
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-16 23:31:43 +0200